]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * OHCI HCD (Host Controller Driver) for USB. | |
3 | * | |
4 | * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at> | |
5 | * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net> | |
6 | * (C) Copyright 2002 Hewlett-Packard Company | |
7 | * | |
8 | * Bus Glue for pxa27x | |
9 | * | |
10 | * Written by Christopher Hoover <ch@hpl.hp.com> | |
11 | * Based on fragments of previous driver by Russell King et al. | |
12 | * | |
13 | * Modified for LH7A404 from ohci-sa1111.c | |
14 | * by Durgesh Pattamatta <pattamattad@sharpsec.com> | |
15 | * | |
16 | * Modified for pxa27x from ohci-lh7a404.c | |
17 | * by Nick Bane <nick@cecomputing.co.uk> 26-8-2004 | |
18 | * | |
19 | * This file is licenced under the GPL. | |
20 | */ | |
21 | ||
22 | #include <linux/device.h> | |
4e57b681 | 23 | #include <linux/signal.h> |
d052d1be | 24 | #include <linux/platform_device.h> |
4fd5f826 | 25 | |
1da177e4 LT |
26 | #include <asm/mach-types.h> |
27 | #include <asm/hardware.h> | |
28 | #include <asm/arch/pxa-regs.h> | |
29 | ||
30 | ||
31 | #define PMM_NPS_MODE 1 | |
32 | #define PMM_GLOBAL_MODE 2 | |
33 | #define PMM_PERPORT_MODE 3 | |
34 | ||
35 | #define PXA_UHC_MAX_PORTNUM 3 | |
36 | ||
37 | #define UHCRHPS(x) __REG2( 0x4C000050, (x)<<2 ) | |
38 | ||
39 | static int pxa27x_ohci_pmm_state; | |
40 | ||
41 | /* | |
42 | PMM_NPS_MODE -- PMM Non-power switching mode | |
43 | Ports are powered continuously. | |
44 | ||
45 | PMM_GLOBAL_MODE -- PMM global switching mode | |
46 | All ports are powered at the same time. | |
47 | ||
48 | PMM_PERPORT_MODE -- PMM per port switching mode | |
49 | Ports are powered individually. | |
50 | */ | |
51 | static int pxa27x_ohci_select_pmm( int mode ) | |
52 | { | |
53 | pxa27x_ohci_pmm_state = mode; | |
54 | ||
55 | switch ( mode ) { | |
56 | case PMM_NPS_MODE: | |
57 | UHCRHDA |= RH_A_NPS; | |
58 | break; | |
59 | case PMM_GLOBAL_MODE: | |
60 | UHCRHDA &= ~(RH_A_NPS & RH_A_PSM); | |
61 | break; | |
62 | case PMM_PERPORT_MODE: | |
63 | UHCRHDA &= ~(RH_A_NPS); | |
64 | UHCRHDA |= RH_A_PSM; | |
65 | ||
66 | /* Set port power control mask bits, only 3 ports. */ | |
67 | UHCRHDB |= (0x7<<17); | |
68 | break; | |
69 | default: | |
70 | printk( KERN_ERR | |
71 | "Invalid mode %d, set to non-power switch mode.\n", | |
72 | mode ); | |
73 | ||
74 | pxa27x_ohci_pmm_state = PMM_NPS_MODE; | |
75 | UHCRHDA |= RH_A_NPS; | |
76 | } | |
77 | ||
78 | return 0; | |
79 | } | |
80 | ||
1da177e4 LT |
81 | extern int usb_disabled(void); |
82 | ||
83 | /*-------------------------------------------------------------------------*/ | |
84 | ||
85 | static void pxa27x_start_hc(struct platform_device *dev) | |
86 | { | |
87 | pxa_set_cken(CKEN10_USBHOST, 1); | |
88 | ||
89 | UHCHR |= UHCHR_FHR; | |
90 | udelay(11); | |
91 | UHCHR &= ~UHCHR_FHR; | |
92 | ||
93 | UHCHR |= UHCHR_FSBIR; | |
94 | while (UHCHR & UHCHR_FSBIR) | |
95 | cpu_relax(); | |
96 | ||
97 | /* This could be properly abstracted away through the | |
98 | device data the day more machines are supported and | |
99 | their differences can be figured out correctly. */ | |
100 | if (machine_is_mainstone()) { | |
101 | /* setup Port1 GPIO pin. */ | |
102 | pxa_gpio_mode( 88 | GPIO_ALT_FN_1_IN); /* USBHPWR1 */ | |
103 | pxa_gpio_mode( 89 | GPIO_ALT_FN_2_OUT); /* USBHPEN1 */ | |
104 | ||
105 | /* Set the Power Control Polarity Low and Power Sense | |
106 | Polarity Low to active low. Supply power to USB ports. */ | |
107 | UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) & | |
108 | ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE); | |
155faf5e DB |
109 | |
110 | pxa27x_ohci_pmm_state = PMM_PERPORT_MODE; | |
1da177e4 LT |
111 | } |
112 | ||
113 | UHCHR &= ~UHCHR_SSE; | |
114 | ||
115 | UHCHIE = (UHCHIE_UPRIE | UHCHIE_RWIE); | |
155faf5e DB |
116 | |
117 | /* Clear any OTG Pin Hold */ | |
118 | if (PSSR & PSSR_OTGPH) | |
119 | PSSR |= PSSR_OTGPH; | |
1da177e4 LT |
120 | } |
121 | ||
122 | static void pxa27x_stop_hc(struct platform_device *dev) | |
123 | { | |
124 | UHCHR |= UHCHR_FHR; | |
125 | udelay(11); | |
126 | UHCHR &= ~UHCHR_FHR; | |
127 | ||
128 | UHCCOMS |= 1; | |
129 | udelay(10); | |
130 | ||
131 | pxa_set_cken(CKEN10_USBHOST, 0); | |
132 | } | |
133 | ||
134 | ||
135 | /*-------------------------------------------------------------------------*/ | |
136 | ||
137 | /* configure so an HC device and id are always provided */ | |
138 | /* always called with process context; sleeping is OK */ | |
139 | ||
140 | ||
141 | /** | |
142 | * usb_hcd_pxa27x_probe - initialize pxa27x-based HCDs | |
143 | * Context: !in_interrupt() | |
144 | * | |
145 | * Allocates basic resources for this USB host controller, and | |
146 | * then invokes the start() method for the HCD associated with it | |
147 | * through the hotplug entry's driver_data. | |
148 | * | |
149 | */ | |
150 | int usb_hcd_pxa27x_probe (const struct hc_driver *driver, | |
151 | struct platform_device *dev) | |
152 | { | |
153 | int retval; | |
154 | struct usb_hcd *hcd; | |
155 | ||
156 | if (dev->resource[1].flags != IORESOURCE_IRQ) { | |
157 | pr_debug ("resource[1] is not IORESOURCE_IRQ"); | |
158 | return -ENOMEM; | |
159 | } | |
160 | ||
161 | hcd = usb_create_hcd (driver, &dev->dev, "pxa27x"); | |
162 | if (!hcd) | |
163 | return -ENOMEM; | |
164 | hcd->rsrc_start = dev->resource[0].start; | |
165 | hcd->rsrc_len = dev->resource[0].end - dev->resource[0].start + 1; | |
166 | ||
167 | if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { | |
168 | pr_debug("request_mem_region failed"); | |
169 | retval = -EBUSY; | |
170 | goto err1; | |
171 | } | |
172 | ||
173 | hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); | |
174 | if (!hcd->regs) { | |
175 | pr_debug("ioremap failed"); | |
176 | retval = -ENOMEM; | |
177 | goto err2; | |
178 | } | |
179 | ||
180 | pxa27x_start_hc(dev); | |
181 | ||
182 | /* Select Power Management Mode */ | |
155faf5e | 183 | pxa27x_ohci_select_pmm(pxa27x_ohci_pmm_state); |
1da177e4 LT |
184 | |
185 | ohci_hcd_init(hcd_to_ohci(hcd)); | |
186 | ||
187 | retval = usb_add_hcd(hcd, dev->resource[1].start, SA_INTERRUPT); | |
188 | if (retval == 0) | |
189 | return retval; | |
190 | ||
191 | pxa27x_stop_hc(dev); | |
192 | iounmap(hcd->regs); | |
193 | err2: | |
194 | release_mem_region(hcd->rsrc_start, hcd->rsrc_len); | |
195 | err1: | |
196 | usb_put_hcd(hcd); | |
197 | return retval; | |
198 | } | |
199 | ||
200 | ||
201 | /* may be called without controller electrically present */ | |
202 | /* may be called with controller, bus, and devices active */ | |
203 | ||
204 | /** | |
205 | * usb_hcd_pxa27x_remove - shutdown processing for pxa27x-based HCDs | |
206 | * @dev: USB Host Controller being removed | |
207 | * Context: !in_interrupt() | |
208 | * | |
209 | * Reverses the effect of usb_hcd_pxa27x_probe(), first invoking | |
210 | * the HCD's stop() method. It is always called from a thread | |
211 | * context, normally "rmmod", "apmd", or something similar. | |
212 | * | |
213 | */ | |
214 | void usb_hcd_pxa27x_remove (struct usb_hcd *hcd, struct platform_device *dev) | |
215 | { | |
216 | usb_remove_hcd(hcd); | |
217 | pxa27x_stop_hc(dev); | |
218 | iounmap(hcd->regs); | |
219 | release_mem_region(hcd->rsrc_start, hcd->rsrc_len); | |
220 | usb_put_hcd(hcd); | |
221 | } | |
222 | ||
223 | /*-------------------------------------------------------------------------*/ | |
224 | ||
225 | static int __devinit | |
226 | ohci_pxa27x_start (struct usb_hcd *hcd) | |
227 | { | |
228 | struct ohci_hcd *ohci = hcd_to_ohci (hcd); | |
229 | int ret; | |
230 | ||
231 | ohci_dbg (ohci, "ohci_pxa27x_start, ohci:%p", ohci); | |
232 | ||
fdd13b36 DB |
233 | /* The value of NDP in roothub_a is incorrect on this hardware */ |
234 | ohci->num_ports = 3; | |
235 | ||
1da177e4 LT |
236 | if ((ret = ohci_init(ohci)) < 0) |
237 | return ret; | |
238 | ||
239 | if ((ret = ohci_run (ohci)) < 0) { | |
240 | err ("can't start %s", hcd->self.bus_name); | |
241 | ohci_stop (hcd); | |
242 | return ret; | |
243 | } | |
244 | ||
245 | return 0; | |
246 | } | |
247 | ||
248 | /*-------------------------------------------------------------------------*/ | |
249 | ||
250 | static const struct hc_driver ohci_pxa27x_hc_driver = { | |
251 | .description = hcd_name, | |
252 | .product_desc = "PXA27x OHCI", | |
253 | .hcd_priv_size = sizeof(struct ohci_hcd), | |
254 | ||
255 | /* | |
256 | * generic hardware linkage | |
257 | */ | |
258 | .irq = ohci_irq, | |
259 | .flags = HCD_USB11 | HCD_MEMORY, | |
260 | ||
261 | /* | |
262 | * basic lifecycle operations | |
263 | */ | |
264 | .start = ohci_pxa27x_start, | |
265 | .stop = ohci_stop, | |
266 | ||
267 | /* | |
268 | * managing i/o requests and associated device resources | |
269 | */ | |
270 | .urb_enqueue = ohci_urb_enqueue, | |
271 | .urb_dequeue = ohci_urb_dequeue, | |
272 | .endpoint_disable = ohci_endpoint_disable, | |
273 | ||
274 | /* | |
275 | * scheduling support | |
276 | */ | |
277 | .get_frame_number = ohci_get_frame, | |
278 | ||
279 | /* | |
280 | * root hub support | |
281 | */ | |
282 | .hub_status_data = ohci_hub_status_data, | |
283 | .hub_control = ohci_hub_control, | |
8ad7fe16 | 284 | #ifdef CONFIG_PM |
0c0382e3 AS |
285 | .bus_suspend = ohci_bus_suspend, |
286 | .bus_resume = ohci_bus_resume, | |
1da177e4 | 287 | #endif |
9293677a | 288 | .start_port_reset = ohci_start_port_reset, |
1da177e4 LT |
289 | }; |
290 | ||
291 | /*-------------------------------------------------------------------------*/ | |
292 | ||
3ae5eaec | 293 | static int ohci_hcd_pxa27x_drv_probe(struct platform_device *pdev) |
1da177e4 | 294 | { |
1da177e4 LT |
295 | int ret; |
296 | ||
297 | pr_debug ("In ohci_hcd_pxa27x_drv_probe"); | |
298 | ||
299 | if (usb_disabled()) | |
300 | return -ENODEV; | |
301 | ||
302 | ret = usb_hcd_pxa27x_probe(&ohci_pxa27x_hc_driver, pdev); | |
303 | return ret; | |
304 | } | |
305 | ||
3ae5eaec | 306 | static int ohci_hcd_pxa27x_drv_remove(struct platform_device *pdev) |
1da177e4 | 307 | { |
3ae5eaec | 308 | struct usb_hcd *hcd = platform_get_drvdata(pdev); |
1da177e4 LT |
309 | |
310 | usb_hcd_pxa27x_remove(hcd, pdev); | |
311 | return 0; | |
312 | } | |
313 | ||
3ae5eaec | 314 | static int ohci_hcd_pxa27x_drv_suspend(struct platform_device *dev, pm_message_t state) |
1da177e4 | 315 | { |
3ae5eaec | 316 | // struct usb_hcd *hcd = platform_get_drvdata(dev); |
1da177e4 LT |
317 | printk("%s: not implemented yet\n", __FUNCTION__); |
318 | ||
319 | return 0; | |
320 | } | |
321 | ||
3ae5eaec | 322 | static int ohci_hcd_pxa27x_drv_resume(struct platform_device *dev) |
1da177e4 | 323 | { |
3ae5eaec | 324 | // struct usb_hcd *hcd = platform_get_drvdata(dev); |
1da177e4 LT |
325 | printk("%s: not implemented yet\n", __FUNCTION__); |
326 | ||
327 | return 0; | |
328 | } | |
329 | ||
330 | ||
3ae5eaec | 331 | static struct platform_driver ohci_hcd_pxa27x_driver = { |
1da177e4 LT |
332 | .probe = ohci_hcd_pxa27x_drv_probe, |
333 | .remove = ohci_hcd_pxa27x_drv_remove, | |
334 | .suspend = ohci_hcd_pxa27x_drv_suspend, | |
3ae5eaec RK |
335 | .resume = ohci_hcd_pxa27x_drv_resume, |
336 | .driver = { | |
337 | .name = "pxa27x-ohci", | |
338 | }, | |
1da177e4 LT |
339 | }; |
340 | ||
341 | static int __init ohci_hcd_pxa27x_init (void) | |
342 | { | |
343 | pr_debug (DRIVER_INFO " (pxa27x)"); | |
344 | pr_debug ("block sizes: ed %d td %d\n", | |
345 | sizeof (struct ed), sizeof (struct td)); | |
346 | ||
3ae5eaec | 347 | return platform_driver_register(&ohci_hcd_pxa27x_driver); |
1da177e4 LT |
348 | } |
349 | ||
350 | static void __exit ohci_hcd_pxa27x_cleanup (void) | |
351 | { | |
3ae5eaec | 352 | platform_driver_unregister(&ohci_hcd_pxa27x_driver); |
1da177e4 LT |
353 | } |
354 | ||
355 | module_init (ohci_hcd_pxa27x_init); | |
356 | module_exit (ohci_hcd_pxa27x_cleanup); |