]>
Commit | Line | Data |
---|---|---|
7f84eef0 SS |
1 | /* |
2 | * xHCI host controller driver | |
3 | * | |
4 | * Copyright (C) 2008 Intel Corp. | |
5 | * | |
6 | * Author: Sarah Sharp | |
7 | * Some code borrowed from the Linux EHCI driver. | |
8 | * | |
9 | * This program is free software; you can redistribute it and/or modify | |
10 | * it under the terms of the GNU General Public License version 2 as | |
11 | * published by the Free Software Foundation. | |
12 | * | |
13 | * This program is distributed in the hope that it will be useful, but | |
14 | * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY | |
15 | * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License | |
16 | * for more details. | |
17 | * | |
18 | * You should have received a copy of the GNU General Public License | |
19 | * along with this program; if not, write to the Free Software Foundation, | |
20 | * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
21 | */ | |
22 | ||
23 | /* | |
24 | * Ring initialization rules: | |
25 | * 1. Each segment is initialized to zero, except for link TRBs. | |
26 | * 2. Ring cycle state = 0. This represents Producer Cycle State (PCS) or | |
27 | * Consumer Cycle State (CCS), depending on ring function. | |
28 | * 3. Enqueue pointer = dequeue pointer = address of first TRB in the segment. | |
29 | * | |
30 | * Ring behavior rules: | |
31 | * 1. A ring is empty if enqueue == dequeue. This means there will always be at | |
32 | * least one free TRB in the ring. This is useful if you want to turn that | |
33 | * into a link TRB and expand the ring. | |
34 | * 2. When incrementing an enqueue or dequeue pointer, if the next TRB is a | |
35 | * link TRB, then load the pointer with the address in the link TRB. If the | |
36 | * link TRB had its toggle bit set, you may need to update the ring cycle | |
37 | * state (see cycle bit rules). You may have to do this multiple times | |
38 | * until you reach a non-link TRB. | |
39 | * 3. A ring is full if enqueue++ (for the definition of increment above) | |
40 | * equals the dequeue pointer. | |
41 | * | |
42 | * Cycle bit rules: | |
43 | * 1. When a consumer increments a dequeue pointer and encounters a toggle bit | |
44 | * in a link TRB, it must toggle the ring cycle state. | |
45 | * 2. When a producer increments an enqueue pointer and encounters a toggle bit | |
46 | * in a link TRB, it must toggle the ring cycle state. | |
47 | * | |
48 | * Producer rules: | |
49 | * 1. Check if ring is full before you enqueue. | |
50 | * 2. Write the ring cycle state to the cycle bit in the TRB you're enqueuing. | |
51 | * Update enqueue pointer between each write (which may update the ring | |
52 | * cycle state). | |
53 | * 3. Notify consumer. If SW is producer, it rings the doorbell for command | |
54 | * and endpoint rings. If HC is the producer for the event ring, | |
55 | * and it generates an interrupt according to interrupt modulation rules. | |
56 | * | |
57 | * Consumer rules: | |
58 | * 1. Check if TRB belongs to you. If the cycle bit == your ring cycle state, | |
59 | * the TRB is owned by the consumer. | |
60 | * 2. Update dequeue pointer (which may update the ring cycle state) and | |
61 | * continue processing TRBs until you reach a TRB which is not owned by you. | |
62 | * 3. Notify the producer. SW is the consumer for the event ring, and it | |
63 | * updates event ring dequeue pointer. HC is the consumer for the command and | |
64 | * endpoint rings; it generates events on the event ring for these. | |
65 | */ | |
66 | ||
8a96c052 | 67 | #include <linux/scatterlist.h> |
5a0e3ad6 | 68 | #include <linux/slab.h> |
7f84eef0 SS |
69 | #include "xhci.h" |
70 | ||
be88fe4f AX |
71 | static int handle_cmd_in_cmd_wait_list(struct xhci_hcd *xhci, |
72 | struct xhci_virt_device *virt_dev, | |
73 | struct xhci_event_cmd *event); | |
74 | ||
7f84eef0 SS |
75 | /* |
76 | * Returns zero if the TRB isn't in this segment, otherwise it returns the DMA | |
77 | * address of the TRB. | |
78 | */ | |
23e3be11 | 79 | dma_addr_t xhci_trb_virt_to_dma(struct xhci_segment *seg, |
7f84eef0 SS |
80 | union xhci_trb *trb) |
81 | { | |
6071d836 | 82 | unsigned long segment_offset; |
7f84eef0 | 83 | |
6071d836 | 84 | if (!seg || !trb || trb < seg->trbs) |
7f84eef0 | 85 | return 0; |
6071d836 SS |
86 | /* offset in TRBs */ |
87 | segment_offset = trb - seg->trbs; | |
88 | if (segment_offset > TRBS_PER_SEGMENT) | |
7f84eef0 | 89 | return 0; |
6071d836 | 90 | return seg->dma + (segment_offset * sizeof(*trb)); |
7f84eef0 SS |
91 | } |
92 | ||
93 | /* Does this link TRB point to the first segment in a ring, | |
94 | * or was the previous TRB the last TRB on the last segment in the ERST? | |
95 | */ | |
575688e1 | 96 | static bool last_trb_on_last_seg(struct xhci_hcd *xhci, struct xhci_ring *ring, |
7f84eef0 SS |
97 | struct xhci_segment *seg, union xhci_trb *trb) |
98 | { | |
99 | if (ring == xhci->event_ring) | |
100 | return (trb == &seg->trbs[TRBS_PER_SEGMENT]) && | |
101 | (seg->next == xhci->event_ring->first_seg); | |
102 | else | |
28ccd296 | 103 | return le32_to_cpu(trb->link.control) & LINK_TOGGLE; |
7f84eef0 SS |
104 | } |
105 | ||
106 | /* Is this TRB a link TRB or was the last TRB the last TRB in this event ring | |
107 | * segment? I.e. would the updated event TRB pointer step off the end of the | |
108 | * event seg? | |
109 | */ | |
575688e1 | 110 | static int last_trb(struct xhci_hcd *xhci, struct xhci_ring *ring, |
7f84eef0 SS |
111 | struct xhci_segment *seg, union xhci_trb *trb) |
112 | { | |
113 | if (ring == xhci->event_ring) | |
114 | return trb == &seg->trbs[TRBS_PER_SEGMENT]; | |
115 | else | |
f5960b69 | 116 | return TRB_TYPE_LINK_LE32(trb->link.control); |
7f84eef0 SS |
117 | } |
118 | ||
575688e1 | 119 | static int enqueue_is_link_trb(struct xhci_ring *ring) |
6c12db90 JY |
120 | { |
121 | struct xhci_link_trb *link = &ring->enqueue->link; | |
f5960b69 | 122 | return TRB_TYPE_LINK_LE32(link->control); |
6c12db90 JY |
123 | } |
124 | ||
ae636747 SS |
125 | /* Updates trb to point to the next TRB in the ring, and updates seg if the next |
126 | * TRB is in a new segment. This does not skip over link TRBs, and it does not | |
127 | * effect the ring dequeue or enqueue pointers. | |
128 | */ | |
129 | static void next_trb(struct xhci_hcd *xhci, | |
130 | struct xhci_ring *ring, | |
131 | struct xhci_segment **seg, | |
132 | union xhci_trb **trb) | |
133 | { | |
134 | if (last_trb(xhci, ring, *seg, *trb)) { | |
135 | *seg = (*seg)->next; | |
136 | *trb = ((*seg)->trbs); | |
137 | } else { | |
a1669b2c | 138 | (*trb)++; |
ae636747 SS |
139 | } |
140 | } | |
141 | ||
7f84eef0 SS |
142 | /* |
143 | * See Cycle bit rules. SW is the consumer for the event ring only. | |
144 | * Don't make a ring full of link TRBs. That would be dumb and this would loop. | |
145 | */ | |
146 | static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer) | |
147 | { | |
148 | union xhci_trb *next = ++(ring->dequeue); | |
66e49d87 | 149 | unsigned long long addr; |
7f84eef0 SS |
150 | |
151 | ring->deq_updates++; | |
152 | /* Update the dequeue pointer further if that was a link TRB or we're at | |
153 | * the end of an event ring segment (which doesn't have link TRBS) | |
154 | */ | |
155 | while (last_trb(xhci, ring, ring->deq_seg, next)) { | |
156 | if (consumer && last_trb_on_last_seg(xhci, ring, ring->deq_seg, next)) { | |
157 | ring->cycle_state = (ring->cycle_state ? 0 : 1); | |
7f84eef0 SS |
158 | } |
159 | ring->deq_seg = ring->deq_seg->next; | |
160 | ring->dequeue = ring->deq_seg->trbs; | |
161 | next = ring->dequeue; | |
162 | } | |
66e49d87 | 163 | addr = (unsigned long long) xhci_trb_virt_to_dma(ring->deq_seg, ring->dequeue); |
7f84eef0 SS |
164 | } |
165 | ||
166 | /* | |
167 | * See Cycle bit rules. SW is the consumer for the event ring only. | |
168 | * Don't make a ring full of link TRBs. That would be dumb and this would loop. | |
169 | * | |
170 | * If we've just enqueued a TRB that is in the middle of a TD (meaning the | |
171 | * chain bit is set), then set the chain bit in all the following link TRBs. | |
172 | * If we've enqueued the last TRB in a TD, make sure the following link TRBs | |
173 | * have their chain bit cleared (so that each Link TRB is a separate TD). | |
174 | * | |
175 | * Section 6.4.4.1 of the 0.95 spec says link TRBs cannot have the chain bit | |
b0567b3f SS |
176 | * set, but other sections talk about dealing with the chain bit set. This was |
177 | * fixed in the 0.96 specification errata, but we have to assume that all 0.95 | |
178 | * xHCI hardware can't handle the chain bit being cleared on a link TRB. | |
6cc30d85 SS |
179 | * |
180 | * @more_trbs_coming: Will you enqueue more TRBs before calling | |
181 | * prepare_transfer()? | |
7f84eef0 | 182 | */ |
6cc30d85 | 183 | static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, |
7e393a83 | 184 | bool consumer, bool more_trbs_coming, bool isoc) |
7f84eef0 SS |
185 | { |
186 | u32 chain; | |
187 | union xhci_trb *next; | |
66e49d87 | 188 | unsigned long long addr; |
7f84eef0 | 189 | |
28ccd296 | 190 | chain = le32_to_cpu(ring->enqueue->generic.field[3]) & TRB_CHAIN; |
7f84eef0 SS |
191 | next = ++(ring->enqueue); |
192 | ||
193 | ring->enq_updates++; | |
194 | /* Update the dequeue pointer further if that was a link TRB or we're at | |
195 | * the end of an event ring segment (which doesn't have link TRBS) | |
196 | */ | |
197 | while (last_trb(xhci, ring, ring->enq_seg, next)) { | |
198 | if (!consumer) { | |
199 | if (ring != xhci->event_ring) { | |
6cc30d85 SS |
200 | /* |
201 | * If the caller doesn't plan on enqueueing more | |
202 | * TDs before ringing the doorbell, then we | |
203 | * don't want to give the link TRB to the | |
204 | * hardware just yet. We'll give the link TRB | |
205 | * back in prepare_ring() just before we enqueue | |
206 | * the TD at the top of the ring. | |
207 | */ | |
208 | if (!chain && !more_trbs_coming) | |
6c12db90 | 209 | break; |
6cc30d85 | 210 | |
7e393a83 AX |
211 | /* If we're not dealing with 0.95 hardware or |
212 | * isoc rings on AMD 0.96 host, | |
6cc30d85 SS |
213 | * carry over the chain bit of the previous TRB |
214 | * (which may mean the chain bit is cleared). | |
215 | */ | |
7e393a83 AX |
216 | if (!(isoc && (xhci->quirks & XHCI_AMD_0x96_HOST)) |
217 | && !xhci_link_trb_quirk(xhci)) { | |
28ccd296 ME |
218 | next->link.control &= |
219 | cpu_to_le32(~TRB_CHAIN); | |
220 | next->link.control |= | |
221 | cpu_to_le32(chain); | |
b0567b3f | 222 | } |
6cc30d85 SS |
223 | /* Give this link TRB to the hardware */ |
224 | wmb(); | |
28ccd296 | 225 | next->link.control ^= cpu_to_le32(TRB_CYCLE); |
7f84eef0 SS |
226 | } |
227 | /* Toggle the cycle bit after the last ring segment. */ | |
228 | if (last_trb_on_last_seg(xhci, ring, ring->enq_seg, next)) { | |
229 | ring->cycle_state = (ring->cycle_state ? 0 : 1); | |
7f84eef0 SS |
230 | } |
231 | } | |
232 | ring->enq_seg = ring->enq_seg->next; | |
233 | ring->enqueue = ring->enq_seg->trbs; | |
234 | next = ring->enqueue; | |
235 | } | |
66e49d87 | 236 | addr = (unsigned long long) xhci_trb_virt_to_dma(ring->enq_seg, ring->enqueue); |
7f84eef0 SS |
237 | } |
238 | ||
239 | /* | |
240 | * Check to see if there's room to enqueue num_trbs on the ring. See rules | |
241 | * above. | |
242 | * FIXME: this would be simpler and faster if we just kept track of the number | |
243 | * of free TRBs in a ring. | |
244 | */ | |
245 | static int room_on_ring(struct xhci_hcd *xhci, struct xhci_ring *ring, | |
246 | unsigned int num_trbs) | |
247 | { | |
248 | int i; | |
249 | union xhci_trb *enq = ring->enqueue; | |
250 | struct xhci_segment *enq_seg = ring->enq_seg; | |
44ebd037 SS |
251 | struct xhci_segment *cur_seg; |
252 | unsigned int left_on_ring; | |
7f84eef0 | 253 | |
6c12db90 JY |
254 | /* If we are currently pointing to a link TRB, advance the |
255 | * enqueue pointer before checking for space */ | |
256 | while (last_trb(xhci, ring, enq_seg, enq)) { | |
257 | enq_seg = enq_seg->next; | |
258 | enq = enq_seg->trbs; | |
259 | } | |
260 | ||
7f84eef0 | 261 | /* Check if ring is empty */ |
44ebd037 SS |
262 | if (enq == ring->dequeue) { |
263 | /* Can't use link trbs */ | |
264 | left_on_ring = TRBS_PER_SEGMENT - 1; | |
265 | for (cur_seg = enq_seg->next; cur_seg != enq_seg; | |
266 | cur_seg = cur_seg->next) | |
267 | left_on_ring += TRBS_PER_SEGMENT - 1; | |
268 | ||
269 | /* Always need one TRB free in the ring. */ | |
270 | left_on_ring -= 1; | |
271 | if (num_trbs > left_on_ring) { | |
272 | xhci_warn(xhci, "Not enough room on ring; " | |
273 | "need %u TRBs, %u TRBs left\n", | |
274 | num_trbs, left_on_ring); | |
275 | return 0; | |
276 | } | |
7f84eef0 | 277 | return 1; |
44ebd037 | 278 | } |
7f84eef0 SS |
279 | /* Make sure there's an extra empty TRB available */ |
280 | for (i = 0; i <= num_trbs; ++i) { | |
281 | if (enq == ring->dequeue) | |
282 | return 0; | |
283 | enq++; | |
284 | while (last_trb(xhci, ring, enq_seg, enq)) { | |
285 | enq_seg = enq_seg->next; | |
286 | enq = enq_seg->trbs; | |
287 | } | |
288 | } | |
289 | return 1; | |
290 | } | |
291 | ||
7f84eef0 | 292 | /* Ring the host controller doorbell after placing a command on the ring */ |
23e3be11 | 293 | void xhci_ring_cmd_db(struct xhci_hcd *xhci) |
7f84eef0 | 294 | { |
7f84eef0 | 295 | xhci_dbg(xhci, "// Ding dong!\n"); |
50d64676 | 296 | xhci_writel(xhci, DB_VALUE_HOST, &xhci->dba->doorbell[0]); |
7f84eef0 SS |
297 | /* Flush PCI posted writes */ |
298 | xhci_readl(xhci, &xhci->dba->doorbell[0]); | |
299 | } | |
300 | ||
be88fe4f | 301 | void xhci_ring_ep_doorbell(struct xhci_hcd *xhci, |
ae636747 | 302 | unsigned int slot_id, |
e9df17eb SS |
303 | unsigned int ep_index, |
304 | unsigned int stream_id) | |
ae636747 | 305 | { |
28ccd296 | 306 | __le32 __iomem *db_addr = &xhci->dba->doorbell[slot_id]; |
50d64676 MW |
307 | struct xhci_virt_ep *ep = &xhci->devs[slot_id]->eps[ep_index]; |
308 | unsigned int ep_state = ep->ep_state; | |
ae636747 | 309 | |
ae636747 | 310 | /* Don't ring the doorbell for this endpoint if there are pending |
50d64676 | 311 | * cancellations because we don't want to interrupt processing. |
8df75f42 SS |
312 | * We don't want to restart any stream rings if there's a set dequeue |
313 | * pointer command pending because the device can choose to start any | |
314 | * stream once the endpoint is on the HW schedule. | |
315 | * FIXME - check all the stream rings for pending cancellations. | |
ae636747 | 316 | */ |
50d64676 MW |
317 | if ((ep_state & EP_HALT_PENDING) || (ep_state & SET_DEQ_PENDING) || |
318 | (ep_state & EP_HALTED)) | |
319 | return; | |
320 | xhci_writel(xhci, DB_VALUE(ep_index, stream_id), db_addr); | |
321 | /* The CPU has better things to do at this point than wait for a | |
322 | * write-posting flush. It'll get there soon enough. | |
323 | */ | |
ae636747 SS |
324 | } |
325 | ||
e9df17eb SS |
326 | /* Ring the doorbell for any rings with pending URBs */ |
327 | static void ring_doorbell_for_active_rings(struct xhci_hcd *xhci, | |
328 | unsigned int slot_id, | |
329 | unsigned int ep_index) | |
330 | { | |
331 | unsigned int stream_id; | |
332 | struct xhci_virt_ep *ep; | |
333 | ||
334 | ep = &xhci->devs[slot_id]->eps[ep_index]; | |
335 | ||
336 | /* A ring has pending URBs if its TD list is not empty */ | |
337 | if (!(ep->ep_state & EP_HAS_STREAMS)) { | |
338 | if (!(list_empty(&ep->ring->td_list))) | |
be88fe4f | 339 | xhci_ring_ep_doorbell(xhci, slot_id, ep_index, 0); |
e9df17eb SS |
340 | return; |
341 | } | |
342 | ||
343 | for (stream_id = 1; stream_id < ep->stream_info->num_streams; | |
344 | stream_id++) { | |
345 | struct xhci_stream_info *stream_info = ep->stream_info; | |
346 | if (!list_empty(&stream_info->stream_rings[stream_id]->td_list)) | |
be88fe4f AX |
347 | xhci_ring_ep_doorbell(xhci, slot_id, ep_index, |
348 | stream_id); | |
e9df17eb SS |
349 | } |
350 | } | |
351 | ||
ae636747 SS |
352 | /* |
353 | * Find the segment that trb is in. Start searching in start_seg. | |
354 | * If we must move past a segment that has a link TRB with a toggle cycle state | |
355 | * bit set, then we will toggle the value pointed at by cycle_state. | |
356 | */ | |
357 | static struct xhci_segment *find_trb_seg( | |
358 | struct xhci_segment *start_seg, | |
359 | union xhci_trb *trb, int *cycle_state) | |
360 | { | |
361 | struct xhci_segment *cur_seg = start_seg; | |
362 | struct xhci_generic_trb *generic_trb; | |
363 | ||
364 | while (cur_seg->trbs > trb || | |
365 | &cur_seg->trbs[TRBS_PER_SEGMENT - 1] < trb) { | |
366 | generic_trb = &cur_seg->trbs[TRBS_PER_SEGMENT - 1].generic; | |
f5960b69 | 367 | if (generic_trb->field[3] & cpu_to_le32(LINK_TOGGLE)) |
ba0a4d9a | 368 | *cycle_state ^= 0x1; |
ae636747 SS |
369 | cur_seg = cur_seg->next; |
370 | if (cur_seg == start_seg) | |
371 | /* Looped over the entire list. Oops! */ | |
326b4810 | 372 | return NULL; |
ae636747 SS |
373 | } |
374 | return cur_seg; | |
375 | } | |
376 | ||
021bff91 SS |
377 | |
378 | static struct xhci_ring *xhci_triad_to_transfer_ring(struct xhci_hcd *xhci, | |
379 | unsigned int slot_id, unsigned int ep_index, | |
380 | unsigned int stream_id) | |
381 | { | |
382 | struct xhci_virt_ep *ep; | |
383 | ||
384 | ep = &xhci->devs[slot_id]->eps[ep_index]; | |
385 | /* Common case: no streams */ | |
386 | if (!(ep->ep_state & EP_HAS_STREAMS)) | |
387 | return ep->ring; | |
388 | ||
389 | if (stream_id == 0) { | |
390 | xhci_warn(xhci, | |
391 | "WARN: Slot ID %u, ep index %u has streams, " | |
392 | "but URB has no stream ID.\n", | |
393 | slot_id, ep_index); | |
394 | return NULL; | |
395 | } | |
396 | ||
397 | if (stream_id < ep->stream_info->num_streams) | |
398 | return ep->stream_info->stream_rings[stream_id]; | |
399 | ||
400 | xhci_warn(xhci, | |
401 | "WARN: Slot ID %u, ep index %u has " | |
402 | "stream IDs 1 to %u allocated, " | |
403 | "but stream ID %u is requested.\n", | |
404 | slot_id, ep_index, | |
405 | ep->stream_info->num_streams - 1, | |
406 | stream_id); | |
407 | return NULL; | |
408 | } | |
409 | ||
410 | /* Get the right ring for the given URB. | |
411 | * If the endpoint supports streams, boundary check the URB's stream ID. | |
412 | * If the endpoint doesn't support streams, return the singular endpoint ring. | |
413 | */ | |
414 | static struct xhci_ring *xhci_urb_to_transfer_ring(struct xhci_hcd *xhci, | |
415 | struct urb *urb) | |
416 | { | |
417 | return xhci_triad_to_transfer_ring(xhci, urb->dev->slot_id, | |
418 | xhci_get_endpoint_index(&urb->ep->desc), urb->stream_id); | |
419 | } | |
420 | ||
ae636747 SS |
421 | /* |
422 | * Move the xHC's endpoint ring dequeue pointer past cur_td. | |
423 | * Record the new state of the xHC's endpoint ring dequeue segment, | |
424 | * dequeue pointer, and new consumer cycle state in state. | |
425 | * Update our internal representation of the ring's dequeue pointer. | |
426 | * | |
427 | * We do this in three jumps: | |
428 | * - First we update our new ring state to be the same as when the xHC stopped. | |
429 | * - Then we traverse the ring to find the segment that contains | |
430 | * the last TRB in the TD. We toggle the xHC's new cycle state when we pass | |
431 | * any link TRBs with the toggle cycle bit set. | |
432 | * - Finally we move the dequeue state one TRB further, toggling the cycle bit | |
433 | * if we've moved it past a link TRB with the toggle cycle bit set. | |
28ccd296 ME |
434 | * |
435 | * Some of the uses of xhci_generic_trb are grotty, but if they're done | |
436 | * with correct __le32 accesses they should work fine. Only users of this are | |
437 | * in here. | |
ae636747 | 438 | */ |
c92bcfa7 | 439 | void xhci_find_new_dequeue_state(struct xhci_hcd *xhci, |
ae636747 | 440 | unsigned int slot_id, unsigned int ep_index, |
e9df17eb SS |
441 | unsigned int stream_id, struct xhci_td *cur_td, |
442 | struct xhci_dequeue_state *state) | |
ae636747 SS |
443 | { |
444 | struct xhci_virt_device *dev = xhci->devs[slot_id]; | |
e9df17eb | 445 | struct xhci_ring *ep_ring; |
ae636747 | 446 | struct xhci_generic_trb *trb; |
d115b048 | 447 | struct xhci_ep_ctx *ep_ctx; |
c92bcfa7 | 448 | dma_addr_t addr; |
ae636747 | 449 | |
e9df17eb SS |
450 | ep_ring = xhci_triad_to_transfer_ring(xhci, slot_id, |
451 | ep_index, stream_id); | |
452 | if (!ep_ring) { | |
453 | xhci_warn(xhci, "WARN can't find new dequeue state " | |
454 | "for invalid stream ID %u.\n", | |
455 | stream_id); | |
456 | return; | |
457 | } | |
ae636747 | 458 | state->new_cycle_state = 0; |
c92bcfa7 | 459 | xhci_dbg(xhci, "Finding segment containing stopped TRB.\n"); |
ae636747 | 460 | state->new_deq_seg = find_trb_seg(cur_td->start_seg, |
63a0d9ab | 461 | dev->eps[ep_index].stopped_trb, |
ae636747 | 462 | &state->new_cycle_state); |
68e41c5d PZ |
463 | if (!state->new_deq_seg) { |
464 | WARN_ON(1); | |
465 | return; | |
466 | } | |
467 | ||
ae636747 | 468 | /* Dig out the cycle state saved by the xHC during the stop ep cmd */ |
c92bcfa7 | 469 | xhci_dbg(xhci, "Finding endpoint context\n"); |
d115b048 | 470 | ep_ctx = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index); |
28ccd296 | 471 | state->new_cycle_state = 0x1 & le64_to_cpu(ep_ctx->deq); |
ae636747 SS |
472 | |
473 | state->new_deq_ptr = cur_td->last_trb; | |
c92bcfa7 | 474 | xhci_dbg(xhci, "Finding segment containing last TRB in TD.\n"); |
ae636747 SS |
475 | state->new_deq_seg = find_trb_seg(state->new_deq_seg, |
476 | state->new_deq_ptr, | |
477 | &state->new_cycle_state); | |
68e41c5d PZ |
478 | if (!state->new_deq_seg) { |
479 | WARN_ON(1); | |
480 | return; | |
481 | } | |
ae636747 SS |
482 | |
483 | trb = &state->new_deq_ptr->generic; | |
f5960b69 ME |
484 | if (TRB_TYPE_LINK_LE32(trb->field[3]) && |
485 | (trb->field[3] & cpu_to_le32(LINK_TOGGLE))) | |
ba0a4d9a | 486 | state->new_cycle_state ^= 0x1; |
ae636747 SS |
487 | next_trb(xhci, ep_ring, &state->new_deq_seg, &state->new_deq_ptr); |
488 | ||
01a1fdb9 SS |
489 | /* |
490 | * If there is only one segment in a ring, find_trb_seg()'s while loop | |
491 | * will not run, and it will return before it has a chance to see if it | |
492 | * needs to toggle the cycle bit. It can't tell if the stalled transfer | |
493 | * ended just before the link TRB on a one-segment ring, or if the TD | |
494 | * wrapped around the top of the ring, because it doesn't have the TD in | |
495 | * question. Look for the one-segment case where stalled TRB's address | |
496 | * is greater than the new dequeue pointer address. | |
497 | */ | |
498 | if (ep_ring->first_seg == ep_ring->first_seg->next && | |
499 | state->new_deq_ptr < dev->eps[ep_index].stopped_trb) | |
500 | state->new_cycle_state ^= 0x1; | |
501 | xhci_dbg(xhci, "Cycle state = 0x%x\n", state->new_cycle_state); | |
502 | ||
ae636747 | 503 | /* Don't update the ring cycle state for the producer (us). */ |
c92bcfa7 SS |
504 | xhci_dbg(xhci, "New dequeue segment = %p (virtual)\n", |
505 | state->new_deq_seg); | |
506 | addr = xhci_trb_virt_to_dma(state->new_deq_seg, state->new_deq_ptr); | |
507 | xhci_dbg(xhci, "New dequeue pointer = 0x%llx (DMA)\n", | |
508 | (unsigned long long) addr); | |
ae636747 SS |
509 | } |
510 | ||
522989a2 SS |
511 | /* flip_cycle means flip the cycle bit of all but the first and last TRB. |
512 | * (The last TRB actually points to the ring enqueue pointer, which is not part | |
513 | * of this TD.) This is used to remove partially enqueued isoc TDs from a ring. | |
514 | */ | |
23e3be11 | 515 | static void td_to_noop(struct xhci_hcd *xhci, struct xhci_ring *ep_ring, |
522989a2 | 516 | struct xhci_td *cur_td, bool flip_cycle) |
ae636747 SS |
517 | { |
518 | struct xhci_segment *cur_seg; | |
519 | union xhci_trb *cur_trb; | |
520 | ||
521 | for (cur_seg = cur_td->start_seg, cur_trb = cur_td->first_trb; | |
522 | true; | |
523 | next_trb(xhci, ep_ring, &cur_seg, &cur_trb)) { | |
f5960b69 | 524 | if (TRB_TYPE_LINK_LE32(cur_trb->generic.field[3])) { |
ae636747 SS |
525 | /* Unchain any chained Link TRBs, but |
526 | * leave the pointers intact. | |
527 | */ | |
28ccd296 | 528 | cur_trb->generic.field[3] &= cpu_to_le32(~TRB_CHAIN); |
522989a2 SS |
529 | /* Flip the cycle bit (link TRBs can't be the first |
530 | * or last TRB). | |
531 | */ | |
532 | if (flip_cycle) | |
533 | cur_trb->generic.field[3] ^= | |
534 | cpu_to_le32(TRB_CYCLE); | |
ae636747 | 535 | xhci_dbg(xhci, "Cancel (unchain) link TRB\n"); |
700e2052 GKH |
536 | xhci_dbg(xhci, "Address = %p (0x%llx dma); " |
537 | "in seg %p (0x%llx dma)\n", | |
538 | cur_trb, | |
23e3be11 | 539 | (unsigned long long)xhci_trb_virt_to_dma(cur_seg, cur_trb), |
700e2052 GKH |
540 | cur_seg, |
541 | (unsigned long long)cur_seg->dma); | |
ae636747 SS |
542 | } else { |
543 | cur_trb->generic.field[0] = 0; | |
544 | cur_trb->generic.field[1] = 0; | |
545 | cur_trb->generic.field[2] = 0; | |
546 | /* Preserve only the cycle bit of this TRB */ | |
28ccd296 | 547 | cur_trb->generic.field[3] &= cpu_to_le32(TRB_CYCLE); |
522989a2 SS |
548 | /* Flip the cycle bit except on the first or last TRB */ |
549 | if (flip_cycle && cur_trb != cur_td->first_trb && | |
550 | cur_trb != cur_td->last_trb) | |
551 | cur_trb->generic.field[3] ^= | |
552 | cpu_to_le32(TRB_CYCLE); | |
28ccd296 ME |
553 | cur_trb->generic.field[3] |= cpu_to_le32( |
554 | TRB_TYPE(TRB_TR_NOOP)); | |
79688acf SS |
555 | xhci_dbg(xhci, "TRB to noop at offset 0x%llx\n", |
556 | (unsigned long long) | |
557 | xhci_trb_virt_to_dma(cur_seg, cur_trb)); | |
ae636747 SS |
558 | } |
559 | if (cur_trb == cur_td->last_trb) | |
560 | break; | |
561 | } | |
562 | } | |
563 | ||
564 | static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id, | |
e9df17eb SS |
565 | unsigned int ep_index, unsigned int stream_id, |
566 | struct xhci_segment *deq_seg, | |
ae636747 SS |
567 | union xhci_trb *deq_ptr, u32 cycle_state); |
568 | ||
c92bcfa7 | 569 | void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci, |
63a0d9ab | 570 | unsigned int slot_id, unsigned int ep_index, |
e9df17eb | 571 | unsigned int stream_id, |
63a0d9ab | 572 | struct xhci_dequeue_state *deq_state) |
c92bcfa7 | 573 | { |
63a0d9ab SS |
574 | struct xhci_virt_ep *ep = &xhci->devs[slot_id]->eps[ep_index]; |
575 | ||
c92bcfa7 SS |
576 | xhci_dbg(xhci, "Set TR Deq Ptr cmd, new deq seg = %p (0x%llx dma), " |
577 | "new deq ptr = %p (0x%llx dma), new cycle = %u\n", | |
578 | deq_state->new_deq_seg, | |
579 | (unsigned long long)deq_state->new_deq_seg->dma, | |
580 | deq_state->new_deq_ptr, | |
581 | (unsigned long long)xhci_trb_virt_to_dma(deq_state->new_deq_seg, deq_state->new_deq_ptr), | |
582 | deq_state->new_cycle_state); | |
e9df17eb | 583 | queue_set_tr_deq(xhci, slot_id, ep_index, stream_id, |
c92bcfa7 SS |
584 | deq_state->new_deq_seg, |
585 | deq_state->new_deq_ptr, | |
586 | (u32) deq_state->new_cycle_state); | |
587 | /* Stop the TD queueing code from ringing the doorbell until | |
588 | * this command completes. The HC won't set the dequeue pointer | |
589 | * if the ring is running, and ringing the doorbell starts the | |
590 | * ring running. | |
591 | */ | |
63a0d9ab | 592 | ep->ep_state |= SET_DEQ_PENDING; |
c92bcfa7 SS |
593 | } |
594 | ||
575688e1 | 595 | static void xhci_stop_watchdog_timer_in_irq(struct xhci_hcd *xhci, |
6f5165cf SS |
596 | struct xhci_virt_ep *ep) |
597 | { | |
598 | ep->ep_state &= ~EP_HALT_PENDING; | |
599 | /* Can't del_timer_sync in interrupt, so we attempt to cancel. If the | |
600 | * timer is running on another CPU, we don't decrement stop_cmds_pending | |
601 | * (since we didn't successfully stop the watchdog timer). | |
602 | */ | |
603 | if (del_timer(&ep->stop_cmd_timer)) | |
604 | ep->stop_cmds_pending--; | |
605 | } | |
606 | ||
607 | /* Must be called with xhci->lock held in interrupt context */ | |
608 | static void xhci_giveback_urb_in_irq(struct xhci_hcd *xhci, | |
609 | struct xhci_td *cur_td, int status, char *adjective) | |
610 | { | |
214f76f7 | 611 | struct usb_hcd *hcd; |
8e51adcc AX |
612 | struct urb *urb; |
613 | struct urb_priv *urb_priv; | |
6f5165cf | 614 | |
8e51adcc AX |
615 | urb = cur_td->urb; |
616 | urb_priv = urb->hcpriv; | |
617 | urb_priv->td_cnt++; | |
214f76f7 | 618 | hcd = bus_to_hcd(urb->dev->bus); |
6f5165cf | 619 | |
8e51adcc AX |
620 | /* Only giveback urb when this is the last td in urb */ |
621 | if (urb_priv->td_cnt == urb_priv->length) { | |
c41136b0 AX |
622 | if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { |
623 | xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs--; | |
624 | if (xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs == 0) { | |
625 | if (xhci->quirks & XHCI_AMD_PLL_FIX) | |
626 | usb_amd_quirk_pll_enable(); | |
627 | } | |
628 | } | |
8e51adcc | 629 | usb_hcd_unlink_urb_from_ep(hcd, urb); |
8e51adcc AX |
630 | |
631 | spin_unlock(&xhci->lock); | |
632 | usb_hcd_giveback_urb(hcd, urb, status); | |
633 | xhci_urb_free_priv(xhci, urb_priv); | |
634 | spin_lock(&xhci->lock); | |
8e51adcc | 635 | } |
6f5165cf SS |
636 | } |
637 | ||
ae636747 SS |
638 | /* |
639 | * When we get a command completion for a Stop Endpoint Command, we need to | |
640 | * unlink any cancelled TDs from the ring. There are two ways to do that: | |
641 | * | |
642 | * 1. If the HW was in the middle of processing the TD that needs to be | |
643 | * cancelled, then we must move the ring's dequeue pointer past the last TRB | |
644 | * in the TD with a Set Dequeue Pointer Command. | |
645 | * 2. Otherwise, we turn all the TRBs in the TD into No-op TRBs (with the chain | |
646 | * bit cleared) so that the HW will skip over them. | |
647 | */ | |
648 | static void handle_stopped_endpoint(struct xhci_hcd *xhci, | |
be88fe4f | 649 | union xhci_trb *trb, struct xhci_event_cmd *event) |
ae636747 SS |
650 | { |
651 | unsigned int slot_id; | |
652 | unsigned int ep_index; | |
be88fe4f | 653 | struct xhci_virt_device *virt_dev; |
ae636747 | 654 | struct xhci_ring *ep_ring; |
63a0d9ab | 655 | struct xhci_virt_ep *ep; |
ae636747 | 656 | struct list_head *entry; |
326b4810 | 657 | struct xhci_td *cur_td = NULL; |
ae636747 SS |
658 | struct xhci_td *last_unlinked_td; |
659 | ||
c92bcfa7 | 660 | struct xhci_dequeue_state deq_state; |
ae636747 | 661 | |
be88fe4f | 662 | if (unlikely(TRB_TO_SUSPEND_PORT( |
28ccd296 | 663 | le32_to_cpu(xhci->cmd_ring->dequeue->generic.field[3])))) { |
be88fe4f | 664 | slot_id = TRB_TO_SLOT_ID( |
28ccd296 | 665 | le32_to_cpu(xhci->cmd_ring->dequeue->generic.field[3])); |
be88fe4f AX |
666 | virt_dev = xhci->devs[slot_id]; |
667 | if (virt_dev) | |
668 | handle_cmd_in_cmd_wait_list(xhci, virt_dev, | |
669 | event); | |
670 | else | |
671 | xhci_warn(xhci, "Stop endpoint command " | |
672 | "completion for disabled slot %u\n", | |
673 | slot_id); | |
674 | return; | |
675 | } | |
676 | ||
ae636747 | 677 | memset(&deq_state, 0, sizeof(deq_state)); |
28ccd296 ME |
678 | slot_id = TRB_TO_SLOT_ID(le32_to_cpu(trb->generic.field[3])); |
679 | ep_index = TRB_TO_EP_INDEX(le32_to_cpu(trb->generic.field[3])); | |
63a0d9ab | 680 | ep = &xhci->devs[slot_id]->eps[ep_index]; |
ae636747 | 681 | |
678539cf | 682 | if (list_empty(&ep->cancelled_td_list)) { |
6f5165cf | 683 | xhci_stop_watchdog_timer_in_irq(xhci, ep); |
0714a57c SS |
684 | ep->stopped_td = NULL; |
685 | ep->stopped_trb = NULL; | |
e9df17eb | 686 | ring_doorbell_for_active_rings(xhci, slot_id, ep_index); |
ae636747 | 687 | return; |
678539cf | 688 | } |
ae636747 SS |
689 | |
690 | /* Fix up the ep ring first, so HW stops executing cancelled TDs. | |
691 | * We have the xHCI lock, so nothing can modify this list until we drop | |
692 | * it. We're also in the event handler, so we can't get re-interrupted | |
693 | * if another Stop Endpoint command completes | |
694 | */ | |
63a0d9ab | 695 | list_for_each(entry, &ep->cancelled_td_list) { |
ae636747 | 696 | cur_td = list_entry(entry, struct xhci_td, cancelled_td_list); |
79688acf SS |
697 | xhci_dbg(xhci, "Removing canceled TD starting at 0x%llx (dma).\n", |
698 | (unsigned long long)xhci_trb_virt_to_dma( | |
699 | cur_td->start_seg, cur_td->first_trb)); | |
e9df17eb SS |
700 | ep_ring = xhci_urb_to_transfer_ring(xhci, cur_td->urb); |
701 | if (!ep_ring) { | |
702 | /* This shouldn't happen unless a driver is mucking | |
703 | * with the stream ID after submission. This will | |
704 | * leave the TD on the hardware ring, and the hardware | |
705 | * will try to execute it, and may access a buffer | |
706 | * that has already been freed. In the best case, the | |
707 | * hardware will execute it, and the event handler will | |
708 | * ignore the completion event for that TD, since it was | |
709 | * removed from the td_list for that endpoint. In | |
710 | * short, don't muck with the stream ID after | |
711 | * submission. | |
712 | */ | |
713 | xhci_warn(xhci, "WARN Cancelled URB %p " | |
714 | "has invalid stream ID %u.\n", | |
715 | cur_td->urb, | |
716 | cur_td->urb->stream_id); | |
717 | goto remove_finished_td; | |
718 | } | |
ae636747 SS |
719 | /* |
720 | * If we stopped on the TD we need to cancel, then we have to | |
721 | * move the xHC endpoint ring dequeue pointer past this TD. | |
722 | */ | |
63a0d9ab | 723 | if (cur_td == ep->stopped_td) |
e9df17eb SS |
724 | xhci_find_new_dequeue_state(xhci, slot_id, ep_index, |
725 | cur_td->urb->stream_id, | |
726 | cur_td, &deq_state); | |
ae636747 | 727 | else |
522989a2 | 728 | td_to_noop(xhci, ep_ring, cur_td, false); |
e9df17eb | 729 | remove_finished_td: |
ae636747 SS |
730 | /* |
731 | * The event handler won't see a completion for this TD anymore, | |
732 | * so remove it from the endpoint ring's TD list. Keep it in | |
733 | * the cancelled TD list for URB completion later. | |
734 | */ | |
585df1d9 | 735 | list_del_init(&cur_td->td_list); |
ae636747 SS |
736 | } |
737 | last_unlinked_td = cur_td; | |
6f5165cf | 738 | xhci_stop_watchdog_timer_in_irq(xhci, ep); |
ae636747 SS |
739 | |
740 | /* If necessary, queue a Set Transfer Ring Dequeue Pointer command */ | |
741 | if (deq_state.new_deq_ptr && deq_state.new_deq_seg) { | |
63a0d9ab | 742 | xhci_queue_new_dequeue_state(xhci, |
e9df17eb SS |
743 | slot_id, ep_index, |
744 | ep->stopped_td->urb->stream_id, | |
745 | &deq_state); | |
ac9d8fe7 | 746 | xhci_ring_cmd_db(xhci); |
ae636747 | 747 | } else { |
e9df17eb SS |
748 | /* Otherwise ring the doorbell(s) to restart queued transfers */ |
749 | ring_doorbell_for_active_rings(xhci, slot_id, ep_index); | |
ae636747 | 750 | } |
1624ae1c SS |
751 | ep->stopped_td = NULL; |
752 | ep->stopped_trb = NULL; | |
ae636747 SS |
753 | |
754 | /* | |
755 | * Drop the lock and complete the URBs in the cancelled TD list. | |
756 | * New TDs to be cancelled might be added to the end of the list before | |
757 | * we can complete all the URBs for the TDs we already unlinked. | |
758 | * So stop when we've completed the URB for the last TD we unlinked. | |
759 | */ | |
760 | do { | |
63a0d9ab | 761 | cur_td = list_entry(ep->cancelled_td_list.next, |
ae636747 | 762 | struct xhci_td, cancelled_td_list); |
585df1d9 | 763 | list_del_init(&cur_td->cancelled_td_list); |
ae636747 SS |
764 | |
765 | /* Clean up the cancelled URB */ | |
ae636747 SS |
766 | /* Doesn't matter what we pass for status, since the core will |
767 | * just overwrite it (because the URB has been unlinked). | |
768 | */ | |
6f5165cf | 769 | xhci_giveback_urb_in_irq(xhci, cur_td, 0, "cancelled"); |
ae636747 | 770 | |
6f5165cf SS |
771 | /* Stop processing the cancelled list if the watchdog timer is |
772 | * running. | |
773 | */ | |
774 | if (xhci->xhc_state & XHCI_STATE_DYING) | |
775 | return; | |
ae636747 SS |
776 | } while (cur_td != last_unlinked_td); |
777 | ||
778 | /* Return to the event handler with xhci->lock re-acquired */ | |
779 | } | |
780 | ||
6f5165cf SS |
781 | /* Watchdog timer function for when a stop endpoint command fails to complete. |
782 | * In this case, we assume the host controller is broken or dying or dead. The | |
783 | * host may still be completing some other events, so we have to be careful to | |
784 | * let the event ring handler and the URB dequeueing/enqueueing functions know | |
785 | * through xhci->state. | |
786 | * | |
787 | * The timer may also fire if the host takes a very long time to respond to the | |
788 | * command, and the stop endpoint command completion handler cannot delete the | |
789 | * timer before the timer function is called. Another endpoint cancellation may | |
790 | * sneak in before the timer function can grab the lock, and that may queue | |
791 | * another stop endpoint command and add the timer back. So we cannot use a | |
792 | * simple flag to say whether there is a pending stop endpoint command for a | |
793 | * particular endpoint. | |
794 | * | |
795 | * Instead we use a combination of that flag and a counter for the number of | |
796 | * pending stop endpoint commands. If the timer is the tail end of the last | |
797 | * stop endpoint command, and the endpoint's command is still pending, we assume | |
798 | * the host is dying. | |
799 | */ | |
800 | void xhci_stop_endpoint_command_watchdog(unsigned long arg) | |
801 | { | |
802 | struct xhci_hcd *xhci; | |
803 | struct xhci_virt_ep *ep; | |
804 | struct xhci_virt_ep *temp_ep; | |
805 | struct xhci_ring *ring; | |
806 | struct xhci_td *cur_td; | |
807 | int ret, i, j; | |
f43d6231 | 808 | unsigned long flags; |
6f5165cf SS |
809 | |
810 | ep = (struct xhci_virt_ep *) arg; | |
811 | xhci = ep->xhci; | |
812 | ||
f43d6231 | 813 | spin_lock_irqsave(&xhci->lock, flags); |
6f5165cf SS |
814 | |
815 | ep->stop_cmds_pending--; | |
816 | if (xhci->xhc_state & XHCI_STATE_DYING) { | |
817 | xhci_dbg(xhci, "Stop EP timer ran, but another timer marked " | |
818 | "xHCI as DYING, exiting.\n"); | |
f43d6231 | 819 | spin_unlock_irqrestore(&xhci->lock, flags); |
6f5165cf SS |
820 | return; |
821 | } | |
822 | if (!(ep->stop_cmds_pending == 0 && (ep->ep_state & EP_HALT_PENDING))) { | |
823 | xhci_dbg(xhci, "Stop EP timer ran, but no command pending, " | |
824 | "exiting.\n"); | |
f43d6231 | 825 | spin_unlock_irqrestore(&xhci->lock, flags); |
6f5165cf SS |
826 | return; |
827 | } | |
828 | ||
829 | xhci_warn(xhci, "xHCI host not responding to stop endpoint command.\n"); | |
830 | xhci_warn(xhci, "Assuming host is dying, halting host.\n"); | |
831 | /* Oops, HC is dead or dying or at least not responding to the stop | |
832 | * endpoint command. | |
833 | */ | |
834 | xhci->xhc_state |= XHCI_STATE_DYING; | |
835 | /* Disable interrupts from the host controller and start halting it */ | |
836 | xhci_quiesce(xhci); | |
f43d6231 | 837 | spin_unlock_irqrestore(&xhci->lock, flags); |
6f5165cf SS |
838 | |
839 | ret = xhci_halt(xhci); | |
840 | ||
f43d6231 | 841 | spin_lock_irqsave(&xhci->lock, flags); |
6f5165cf SS |
842 | if (ret < 0) { |
843 | /* This is bad; the host is not responding to commands and it's | |
844 | * not allowing itself to be halted. At least interrupts are | |
ac04e6ff | 845 | * disabled. If we call usb_hc_died(), it will attempt to |
6f5165cf SS |
846 | * disconnect all device drivers under this host. Those |
847 | * disconnect() methods will wait for all URBs to be unlinked, | |
848 | * so we must complete them. | |
849 | */ | |
850 | xhci_warn(xhci, "Non-responsive xHCI host is not halting.\n"); | |
851 | xhci_warn(xhci, "Completing active URBs anyway.\n"); | |
852 | /* We could turn all TDs on the rings to no-ops. This won't | |
853 | * help if the host has cached part of the ring, and is slow if | |
854 | * we want to preserve the cycle bit. Skip it and hope the host | |
855 | * doesn't touch the memory. | |
856 | */ | |
857 | } | |
858 | for (i = 0; i < MAX_HC_SLOTS; i++) { | |
859 | if (!xhci->devs[i]) | |
860 | continue; | |
861 | for (j = 0; j < 31; j++) { | |
862 | temp_ep = &xhci->devs[i]->eps[j]; | |
863 | ring = temp_ep->ring; | |
864 | if (!ring) | |
865 | continue; | |
866 | xhci_dbg(xhci, "Killing URBs for slot ID %u, " | |
867 | "ep index %u\n", i, j); | |
868 | while (!list_empty(&ring->td_list)) { | |
869 | cur_td = list_first_entry(&ring->td_list, | |
870 | struct xhci_td, | |
871 | td_list); | |
585df1d9 | 872 | list_del_init(&cur_td->td_list); |
6f5165cf | 873 | if (!list_empty(&cur_td->cancelled_td_list)) |
585df1d9 | 874 | list_del_init(&cur_td->cancelled_td_list); |
6f5165cf SS |
875 | xhci_giveback_urb_in_irq(xhci, cur_td, |
876 | -ESHUTDOWN, "killed"); | |
877 | } | |
878 | while (!list_empty(&temp_ep->cancelled_td_list)) { | |
879 | cur_td = list_first_entry( | |
880 | &temp_ep->cancelled_td_list, | |
881 | struct xhci_td, | |
882 | cancelled_td_list); | |
585df1d9 | 883 | list_del_init(&cur_td->cancelled_td_list); |
6f5165cf SS |
884 | xhci_giveback_urb_in_irq(xhci, cur_td, |
885 | -ESHUTDOWN, "killed"); | |
886 | } | |
887 | } | |
888 | } | |
f43d6231 | 889 | spin_unlock_irqrestore(&xhci->lock, flags); |
6f5165cf | 890 | xhci_dbg(xhci, "Calling usb_hc_died()\n"); |
f6ff0ac8 | 891 | usb_hc_died(xhci_to_hcd(xhci)->primary_hcd); |
6f5165cf SS |
892 | xhci_dbg(xhci, "xHCI host controller is dead.\n"); |
893 | } | |
894 | ||
ae636747 SS |
895 | /* |
896 | * When we get a completion for a Set Transfer Ring Dequeue Pointer command, | |
897 | * we need to clear the set deq pending flag in the endpoint ring state, so that | |
898 | * the TD queueing code can ring the doorbell again. We also need to ring the | |
899 | * endpoint doorbell to restart the ring, but only if there aren't more | |
900 | * cancellations pending. | |
901 | */ | |
902 | static void handle_set_deq_completion(struct xhci_hcd *xhci, | |
903 | struct xhci_event_cmd *event, | |
904 | union xhci_trb *trb) | |
905 | { | |
906 | unsigned int slot_id; | |
907 | unsigned int ep_index; | |
e9df17eb | 908 | unsigned int stream_id; |
ae636747 SS |
909 | struct xhci_ring *ep_ring; |
910 | struct xhci_virt_device *dev; | |
d115b048 JY |
911 | struct xhci_ep_ctx *ep_ctx; |
912 | struct xhci_slot_ctx *slot_ctx; | |
ae636747 | 913 | |
28ccd296 ME |
914 | slot_id = TRB_TO_SLOT_ID(le32_to_cpu(trb->generic.field[3])); |
915 | ep_index = TRB_TO_EP_INDEX(le32_to_cpu(trb->generic.field[3])); | |
916 | stream_id = TRB_TO_STREAM_ID(le32_to_cpu(trb->generic.field[2])); | |
ae636747 | 917 | dev = xhci->devs[slot_id]; |
e9df17eb SS |
918 | |
919 | ep_ring = xhci_stream_id_to_ring(dev, ep_index, stream_id); | |
920 | if (!ep_ring) { | |
921 | xhci_warn(xhci, "WARN Set TR deq ptr command for " | |
922 | "freed stream ID %u\n", | |
923 | stream_id); | |
924 | /* XXX: Harmless??? */ | |
925 | dev->eps[ep_index].ep_state &= ~SET_DEQ_PENDING; | |
926 | return; | |
927 | } | |
928 | ||
d115b048 JY |
929 | ep_ctx = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index); |
930 | slot_ctx = xhci_get_slot_ctx(xhci, dev->out_ctx); | |
ae636747 | 931 | |
28ccd296 | 932 | if (GET_COMP_CODE(le32_to_cpu(event->status)) != COMP_SUCCESS) { |
ae636747 SS |
933 | unsigned int ep_state; |
934 | unsigned int slot_state; | |
935 | ||
28ccd296 | 936 | switch (GET_COMP_CODE(le32_to_cpu(event->status))) { |
ae636747 SS |
937 | case COMP_TRB_ERR: |
938 | xhci_warn(xhci, "WARN Set TR Deq Ptr cmd invalid because " | |
939 | "of stream ID configuration\n"); | |
940 | break; | |
941 | case COMP_CTX_STATE: | |
942 | xhci_warn(xhci, "WARN Set TR Deq Ptr cmd failed due " | |
943 | "to incorrect slot or ep state.\n"); | |
28ccd296 | 944 | ep_state = le32_to_cpu(ep_ctx->ep_info); |
ae636747 | 945 | ep_state &= EP_STATE_MASK; |
28ccd296 | 946 | slot_state = le32_to_cpu(slot_ctx->dev_state); |
ae636747 SS |
947 | slot_state = GET_SLOT_STATE(slot_state); |
948 | xhci_dbg(xhci, "Slot state = %u, EP state = %u\n", | |
949 | slot_state, ep_state); | |
950 | break; | |
951 | case COMP_EBADSLT: | |
952 | xhci_warn(xhci, "WARN Set TR Deq Ptr cmd failed because " | |
953 | "slot %u was not enabled.\n", slot_id); | |
954 | break; | |
955 | default: | |
956 | xhci_warn(xhci, "WARN Set TR Deq Ptr cmd with unknown " | |
957 | "completion code of %u.\n", | |
28ccd296 | 958 | GET_COMP_CODE(le32_to_cpu(event->status))); |
ae636747 SS |
959 | break; |
960 | } | |
961 | /* OK what do we do now? The endpoint state is hosed, and we | |
962 | * should never get to this point if the synchronization between | |
963 | * queueing, and endpoint state are correct. This might happen | |
964 | * if the device gets disconnected after we've finished | |
965 | * cancelling URBs, which might not be an error... | |
966 | */ | |
967 | } else { | |
8e595a5d | 968 | xhci_dbg(xhci, "Successful Set TR Deq Ptr cmd, deq = @%08llx\n", |
28ccd296 | 969 | le64_to_cpu(ep_ctx->deq)); |
bf161e85 | 970 | if (xhci_trb_virt_to_dma(dev->eps[ep_index].queued_deq_seg, |
28ccd296 ME |
971 | dev->eps[ep_index].queued_deq_ptr) == |
972 | (le64_to_cpu(ep_ctx->deq) & ~(EP_CTX_CYCLE_MASK))) { | |
bf161e85 SS |
973 | /* Update the ring's dequeue segment and dequeue pointer |
974 | * to reflect the new position. | |
975 | */ | |
976 | ep_ring->deq_seg = dev->eps[ep_index].queued_deq_seg; | |
977 | ep_ring->dequeue = dev->eps[ep_index].queued_deq_ptr; | |
978 | } else { | |
979 | xhci_warn(xhci, "Mismatch between completed Set TR Deq " | |
980 | "Ptr command & xHCI internal state.\n"); | |
981 | xhci_warn(xhci, "ep deq seg = %p, deq ptr = %p\n", | |
982 | dev->eps[ep_index].queued_deq_seg, | |
983 | dev->eps[ep_index].queued_deq_ptr); | |
984 | } | |
ae636747 SS |
985 | } |
986 | ||
63a0d9ab | 987 | dev->eps[ep_index].ep_state &= ~SET_DEQ_PENDING; |
bf161e85 SS |
988 | dev->eps[ep_index].queued_deq_seg = NULL; |
989 | dev->eps[ep_index].queued_deq_ptr = NULL; | |
e9df17eb SS |
990 | /* Restart any rings with pending URBs */ |
991 | ring_doorbell_for_active_rings(xhci, slot_id, ep_index); | |
ae636747 SS |
992 | } |
993 | ||
a1587d97 SS |
994 | static void handle_reset_ep_completion(struct xhci_hcd *xhci, |
995 | struct xhci_event_cmd *event, | |
996 | union xhci_trb *trb) | |
997 | { | |
998 | int slot_id; | |
999 | unsigned int ep_index; | |
1000 | ||
28ccd296 ME |
1001 | slot_id = TRB_TO_SLOT_ID(le32_to_cpu(trb->generic.field[3])); |
1002 | ep_index = TRB_TO_EP_INDEX(le32_to_cpu(trb->generic.field[3])); | |
a1587d97 SS |
1003 | /* This command will only fail if the endpoint wasn't halted, |
1004 | * but we don't care. | |
1005 | */ | |
1006 | xhci_dbg(xhci, "Ignoring reset ep completion code of %u\n", | |
f5960b69 | 1007 | GET_COMP_CODE(le32_to_cpu(event->status))); |
a1587d97 | 1008 | |
ac9d8fe7 SS |
1009 | /* HW with the reset endpoint quirk needs to have a configure endpoint |
1010 | * command complete before the endpoint can be used. Queue that here | |
1011 | * because the HW can't handle two commands being queued in a row. | |
1012 | */ | |
1013 | if (xhci->quirks & XHCI_RESET_EP_QUIRK) { | |
1014 | xhci_dbg(xhci, "Queueing configure endpoint command\n"); | |
1015 | xhci_queue_configure_endpoint(xhci, | |
913a8a34 SS |
1016 | xhci->devs[slot_id]->in_ctx->dma, slot_id, |
1017 | false); | |
ac9d8fe7 SS |
1018 | xhci_ring_cmd_db(xhci); |
1019 | } else { | |
e9df17eb | 1020 | /* Clear our internal halted state and restart the ring(s) */ |
63a0d9ab | 1021 | xhci->devs[slot_id]->eps[ep_index].ep_state &= ~EP_HALTED; |
e9df17eb | 1022 | ring_doorbell_for_active_rings(xhci, slot_id, ep_index); |
ac9d8fe7 | 1023 | } |
a1587d97 | 1024 | } |
ae636747 | 1025 | |
a50c8aa9 SS |
1026 | /* Check to see if a command in the device's command queue matches this one. |
1027 | * Signal the completion or free the command, and return 1. Return 0 if the | |
1028 | * completed command isn't at the head of the command list. | |
1029 | */ | |
1030 | static int handle_cmd_in_cmd_wait_list(struct xhci_hcd *xhci, | |
1031 | struct xhci_virt_device *virt_dev, | |
1032 | struct xhci_event_cmd *event) | |
1033 | { | |
1034 | struct xhci_command *command; | |
1035 | ||
1036 | if (list_empty(&virt_dev->cmd_list)) | |
1037 | return 0; | |
1038 | ||
1039 | command = list_entry(virt_dev->cmd_list.next, | |
1040 | struct xhci_command, cmd_list); | |
1041 | if (xhci->cmd_ring->dequeue != command->command_trb) | |
1042 | return 0; | |
1043 | ||
28ccd296 | 1044 | command->status = GET_COMP_CODE(le32_to_cpu(event->status)); |
a50c8aa9 SS |
1045 | list_del(&command->cmd_list); |
1046 | if (command->completion) | |
1047 | complete(command->completion); | |
1048 | else | |
1049 | xhci_free_command(xhci, command); | |
1050 | return 1; | |
1051 | } | |
1052 | ||
7f84eef0 SS |
1053 | static void handle_cmd_completion(struct xhci_hcd *xhci, |
1054 | struct xhci_event_cmd *event) | |
1055 | { | |
28ccd296 | 1056 | int slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->flags)); |
7f84eef0 SS |
1057 | u64 cmd_dma; |
1058 | dma_addr_t cmd_dequeue_dma; | |
ac9d8fe7 | 1059 | struct xhci_input_control_ctx *ctrl_ctx; |
913a8a34 | 1060 | struct xhci_virt_device *virt_dev; |
ac9d8fe7 SS |
1061 | unsigned int ep_index; |
1062 | struct xhci_ring *ep_ring; | |
1063 | unsigned int ep_state; | |
7f84eef0 | 1064 | |
28ccd296 | 1065 | cmd_dma = le64_to_cpu(event->cmd_trb); |
23e3be11 | 1066 | cmd_dequeue_dma = xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg, |
7f84eef0 SS |
1067 | xhci->cmd_ring->dequeue); |
1068 | /* Is the command ring deq ptr out of sync with the deq seg ptr? */ | |
1069 | if (cmd_dequeue_dma == 0) { | |
1070 | xhci->error_bitmask |= 1 << 4; | |
1071 | return; | |
1072 | } | |
1073 | /* Does the DMA address match our internal dequeue pointer address? */ | |
1074 | if (cmd_dma != (u64) cmd_dequeue_dma) { | |
1075 | xhci->error_bitmask |= 1 << 5; | |
1076 | return; | |
1077 | } | |
28ccd296 ME |
1078 | switch (le32_to_cpu(xhci->cmd_ring->dequeue->generic.field[3]) |
1079 | & TRB_TYPE_BITMASK) { | |
3ffbba95 | 1080 | case TRB_TYPE(TRB_ENABLE_SLOT): |
28ccd296 | 1081 | if (GET_COMP_CODE(le32_to_cpu(event->status)) == COMP_SUCCESS) |
3ffbba95 SS |
1082 | xhci->slot_id = slot_id; |
1083 | else | |
1084 | xhci->slot_id = 0; | |
1085 | complete(&xhci->addr_dev); | |
1086 | break; | |
1087 | case TRB_TYPE(TRB_DISABLE_SLOT): | |
2cf95c18 SS |
1088 | if (xhci->devs[slot_id]) { |
1089 | if (xhci->quirks & XHCI_EP_LIMIT_QUIRK) | |
1090 | /* Delete default control endpoint resources */ | |
1091 | xhci_free_device_endpoint_resources(xhci, | |
1092 | xhci->devs[slot_id], true); | |
3ffbba95 | 1093 | xhci_free_virt_device(xhci, slot_id); |
2cf95c18 | 1094 | } |
3ffbba95 | 1095 | break; |
f94e0186 | 1096 | case TRB_TYPE(TRB_CONFIG_EP): |
913a8a34 | 1097 | virt_dev = xhci->devs[slot_id]; |
a50c8aa9 | 1098 | if (handle_cmd_in_cmd_wait_list(xhci, virt_dev, event)) |
913a8a34 | 1099 | break; |
ac9d8fe7 SS |
1100 | /* |
1101 | * Configure endpoint commands can come from the USB core | |
1102 | * configuration or alt setting changes, or because the HW | |
1103 | * needed an extra configure endpoint command after a reset | |
8df75f42 SS |
1104 | * endpoint command or streams were being configured. |
1105 | * If the command was for a halted endpoint, the xHCI driver | |
1106 | * is not waiting on the configure endpoint command. | |
ac9d8fe7 SS |
1107 | */ |
1108 | ctrl_ctx = xhci_get_input_control_ctx(xhci, | |
913a8a34 | 1109 | virt_dev->in_ctx); |
ac9d8fe7 | 1110 | /* Input ctx add_flags are the endpoint index plus one */ |
28ccd296 | 1111 | ep_index = xhci_last_valid_endpoint(le32_to_cpu(ctrl_ctx->add_flags)) - 1; |
06df5729 | 1112 | /* A usb_set_interface() call directly after clearing a halted |
e9df17eb SS |
1113 | * condition may race on this quirky hardware. Not worth |
1114 | * worrying about, since this is prototype hardware. Not sure | |
1115 | * if this will work for streams, but streams support was | |
1116 | * untested on this prototype. | |
06df5729 | 1117 | */ |
ac9d8fe7 | 1118 | if (xhci->quirks & XHCI_RESET_EP_QUIRK && |
06df5729 | 1119 | ep_index != (unsigned int) -1 && |
28ccd296 ME |
1120 | le32_to_cpu(ctrl_ctx->add_flags) - SLOT_FLAG == |
1121 | le32_to_cpu(ctrl_ctx->drop_flags)) { | |
06df5729 SS |
1122 | ep_ring = xhci->devs[slot_id]->eps[ep_index].ring; |
1123 | ep_state = xhci->devs[slot_id]->eps[ep_index].ep_state; | |
1124 | if (!(ep_state & EP_HALTED)) | |
1125 | goto bandwidth_change; | |
1126 | xhci_dbg(xhci, "Completed config ep cmd - " | |
1127 | "last ep index = %d, state = %d\n", | |
1128 | ep_index, ep_state); | |
e9df17eb | 1129 | /* Clear internal halted state and restart ring(s) */ |
63a0d9ab | 1130 | xhci->devs[slot_id]->eps[ep_index].ep_state &= |
ac9d8fe7 | 1131 | ~EP_HALTED; |
e9df17eb | 1132 | ring_doorbell_for_active_rings(xhci, slot_id, ep_index); |
06df5729 | 1133 | break; |
ac9d8fe7 | 1134 | } |
06df5729 SS |
1135 | bandwidth_change: |
1136 | xhci_dbg(xhci, "Completed config ep cmd\n"); | |
1137 | xhci->devs[slot_id]->cmd_status = | |
28ccd296 | 1138 | GET_COMP_CODE(le32_to_cpu(event->status)); |
06df5729 | 1139 | complete(&xhci->devs[slot_id]->cmd_completion); |
f94e0186 | 1140 | break; |
2d3f1fac | 1141 | case TRB_TYPE(TRB_EVAL_CONTEXT): |
ac1c1b7f SS |
1142 | virt_dev = xhci->devs[slot_id]; |
1143 | if (handle_cmd_in_cmd_wait_list(xhci, virt_dev, event)) | |
1144 | break; | |
28ccd296 | 1145 | xhci->devs[slot_id]->cmd_status = GET_COMP_CODE(le32_to_cpu(event->status)); |
2d3f1fac SS |
1146 | complete(&xhci->devs[slot_id]->cmd_completion); |
1147 | break; | |
3ffbba95 | 1148 | case TRB_TYPE(TRB_ADDR_DEV): |
28ccd296 | 1149 | xhci->devs[slot_id]->cmd_status = GET_COMP_CODE(le32_to_cpu(event->status)); |
3ffbba95 SS |
1150 | complete(&xhci->addr_dev); |
1151 | break; | |
ae636747 | 1152 | case TRB_TYPE(TRB_STOP_RING): |
be88fe4f | 1153 | handle_stopped_endpoint(xhci, xhci->cmd_ring->dequeue, event); |
ae636747 SS |
1154 | break; |
1155 | case TRB_TYPE(TRB_SET_DEQ): | |
1156 | handle_set_deq_completion(xhci, event, xhci->cmd_ring->dequeue); | |
1157 | break; | |
7f84eef0 | 1158 | case TRB_TYPE(TRB_CMD_NOOP): |
7f84eef0 | 1159 | break; |
a1587d97 SS |
1160 | case TRB_TYPE(TRB_RESET_EP): |
1161 | handle_reset_ep_completion(xhci, event, xhci->cmd_ring->dequeue); | |
1162 | break; | |
2a8f82c4 SS |
1163 | case TRB_TYPE(TRB_RESET_DEV): |
1164 | xhci_dbg(xhci, "Completed reset device command.\n"); | |
1165 | slot_id = TRB_TO_SLOT_ID( | |
28ccd296 | 1166 | le32_to_cpu(xhci->cmd_ring->dequeue->generic.field[3])); |
2a8f82c4 SS |
1167 | virt_dev = xhci->devs[slot_id]; |
1168 | if (virt_dev) | |
1169 | handle_cmd_in_cmd_wait_list(xhci, virt_dev, event); | |
1170 | else | |
1171 | xhci_warn(xhci, "Reset device command completion " | |
1172 | "for disabled slot %u\n", slot_id); | |
1173 | break; | |
0238634d SS |
1174 | case TRB_TYPE(TRB_NEC_GET_FW): |
1175 | if (!(xhci->quirks & XHCI_NEC_HOST)) { | |
1176 | xhci->error_bitmask |= 1 << 6; | |
1177 | break; | |
1178 | } | |
1179 | xhci_dbg(xhci, "NEC firmware version %2x.%02x\n", | |
28ccd296 ME |
1180 | NEC_FW_MAJOR(le32_to_cpu(event->status)), |
1181 | NEC_FW_MINOR(le32_to_cpu(event->status))); | |
0238634d | 1182 | break; |
7f84eef0 SS |
1183 | default: |
1184 | /* Skip over unknown commands on the event ring */ | |
1185 | xhci->error_bitmask |= 1 << 6; | |
1186 | break; | |
1187 | } | |
1188 | inc_deq(xhci, xhci->cmd_ring, false); | |
1189 | } | |
1190 | ||
0238634d SS |
1191 | static void handle_vendor_event(struct xhci_hcd *xhci, |
1192 | union xhci_trb *event) | |
1193 | { | |
1194 | u32 trb_type; | |
1195 | ||
28ccd296 | 1196 | trb_type = TRB_FIELD_TO_TYPE(le32_to_cpu(event->generic.field[3])); |
0238634d SS |
1197 | xhci_dbg(xhci, "Vendor specific event TRB type = %u\n", trb_type); |
1198 | if (trb_type == TRB_NEC_CMD_COMP && (xhci->quirks & XHCI_NEC_HOST)) | |
1199 | handle_cmd_completion(xhci, &event->event_cmd); | |
1200 | } | |
1201 | ||
f6ff0ac8 SS |
1202 | /* @port_id: the one-based port ID from the hardware (indexed from array of all |
1203 | * port registers -- USB 3.0 and USB 2.0). | |
1204 | * | |
1205 | * Returns a zero-based port number, which is suitable for indexing into each of | |
1206 | * the split roothubs' port arrays and bus state arrays. | |
d0cd5d48 | 1207 | * Add one to it in order to call xhci_find_slot_id_by_port. |
f6ff0ac8 SS |
1208 | */ |
1209 | static unsigned int find_faked_portnum_from_hw_portnum(struct usb_hcd *hcd, | |
1210 | struct xhci_hcd *xhci, u32 port_id) | |
1211 | { | |
1212 | unsigned int i; | |
1213 | unsigned int num_similar_speed_ports = 0; | |
1214 | ||
1215 | /* port_id from the hardware is 1-based, but port_array[], usb3_ports[], | |
1216 | * and usb2_ports are 0-based indexes. Count the number of similar | |
1217 | * speed ports, up to 1 port before this port. | |
1218 | */ | |
1219 | for (i = 0; i < (port_id - 1); i++) { | |
1220 | u8 port_speed = xhci->port_array[i]; | |
1221 | ||
1222 | /* | |
1223 | * Skip ports that don't have known speeds, or have duplicate | |
1224 | * Extended Capabilities port speed entries. | |
1225 | */ | |
22e04870 | 1226 | if (port_speed == 0 || port_speed == DUPLICATE_ENTRY) |
f6ff0ac8 SS |
1227 | continue; |
1228 | ||
1229 | /* | |
1230 | * USB 3.0 ports are always under a USB 3.0 hub. USB 2.0 and | |
1231 | * 1.1 ports are under the USB 2.0 hub. If the port speed | |
1232 | * matches the device speed, it's a similar speed port. | |
1233 | */ | |
1234 | if ((port_speed == 0x03) == (hcd->speed == HCD_USB3)) | |
1235 | num_similar_speed_ports++; | |
1236 | } | |
1237 | return num_similar_speed_ports; | |
1238 | } | |
1239 | ||
623bef9e SS |
1240 | static void handle_device_notification(struct xhci_hcd *xhci, |
1241 | union xhci_trb *event) | |
1242 | { | |
1243 | u32 slot_id; | |
1244 | ||
1245 | slot_id = TRB_TO_SLOT_ID(event->generic.field[3]); | |
1246 | if (!xhci->devs[slot_id]) | |
1247 | xhci_warn(xhci, "Device Notification event for " | |
1248 | "unused slot %u\n", slot_id); | |
1249 | else | |
1250 | xhci_dbg(xhci, "Device Notification event for slot ID %u\n", | |
1251 | slot_id); | |
1252 | /* XXX should we kick khubd for the parent hub? It should have send an | |
1253 | * interrupt transfer when the port started signaling resume, so there's | |
1254 | * probably no need to do so. | |
1255 | */ | |
1256 | } | |
1257 | ||
0f2a7930 SS |
1258 | static void handle_port_status(struct xhci_hcd *xhci, |
1259 | union xhci_trb *event) | |
1260 | { | |
f6ff0ac8 | 1261 | struct usb_hcd *hcd; |
0f2a7930 | 1262 | u32 port_id; |
56192531 | 1263 | u32 temp, temp1; |
518e848e | 1264 | int max_ports; |
56192531 | 1265 | int slot_id; |
5308a91b | 1266 | unsigned int faked_port_index; |
f6ff0ac8 | 1267 | u8 major_revision; |
20b67cf5 | 1268 | struct xhci_bus_state *bus_state; |
28ccd296 | 1269 | __le32 __iomem **port_array; |
386139d7 | 1270 | bool bogus_port_status = false; |
0f2a7930 SS |
1271 | |
1272 | /* Port status change events always have a successful completion code */ | |
28ccd296 | 1273 | if (GET_COMP_CODE(le32_to_cpu(event->generic.field[2])) != COMP_SUCCESS) { |
0f2a7930 SS |
1274 | xhci_warn(xhci, "WARN: xHC returned failed port status event\n"); |
1275 | xhci->error_bitmask |= 1 << 8; | |
1276 | } | |
28ccd296 | 1277 | port_id = GET_PORT_ID(le32_to_cpu(event->generic.field[0])); |
0f2a7930 SS |
1278 | xhci_dbg(xhci, "Port Status Change Event for port %d\n", port_id); |
1279 | ||
518e848e SS |
1280 | max_ports = HCS_MAX_PORTS(xhci->hcs_params1); |
1281 | if ((port_id <= 0) || (port_id > max_ports)) { | |
56192531 | 1282 | xhci_warn(xhci, "Invalid port id %d\n", port_id); |
386139d7 | 1283 | bogus_port_status = true; |
56192531 AX |
1284 | goto cleanup; |
1285 | } | |
1286 | ||
f6ff0ac8 SS |
1287 | /* Figure out which usb_hcd this port is attached to: |
1288 | * is it a USB 3.0 port or a USB 2.0/1.1 port? | |
1289 | */ | |
1290 | major_revision = xhci->port_array[port_id - 1]; | |
1291 | if (major_revision == 0) { | |
1292 | xhci_warn(xhci, "Event for port %u not in " | |
1293 | "Extended Capabilities, ignoring.\n", | |
1294 | port_id); | |
386139d7 | 1295 | bogus_port_status = true; |
f6ff0ac8 | 1296 | goto cleanup; |
5308a91b | 1297 | } |
22e04870 | 1298 | if (major_revision == DUPLICATE_ENTRY) { |
f6ff0ac8 SS |
1299 | xhci_warn(xhci, "Event for port %u duplicated in" |
1300 | "Extended Capabilities, ignoring.\n", | |
1301 | port_id); | |
386139d7 | 1302 | bogus_port_status = true; |
f6ff0ac8 SS |
1303 | goto cleanup; |
1304 | } | |
1305 | ||
1306 | /* | |
1307 | * Hardware port IDs reported by a Port Status Change Event include USB | |
1308 | * 3.0 and USB 2.0 ports. We want to check if the port has reported a | |
1309 | * resume event, but we first need to translate the hardware port ID | |
1310 | * into the index into the ports on the correct split roothub, and the | |
1311 | * correct bus_state structure. | |
1312 | */ | |
1313 | /* Find the right roothub. */ | |
1314 | hcd = xhci_to_hcd(xhci); | |
1315 | if ((major_revision == 0x03) != (hcd->speed == HCD_USB3)) | |
1316 | hcd = xhci->shared_hcd; | |
1317 | bus_state = &xhci->bus_state[hcd_index(hcd)]; | |
1318 | if (hcd->speed == HCD_USB3) | |
1319 | port_array = xhci->usb3_ports; | |
1320 | else | |
1321 | port_array = xhci->usb2_ports; | |
1322 | /* Find the faked port hub number */ | |
1323 | faked_port_index = find_faked_portnum_from_hw_portnum(hcd, xhci, | |
1324 | port_id); | |
5308a91b | 1325 | |
5308a91b | 1326 | temp = xhci_readl(xhci, port_array[faked_port_index]); |
7111ebc9 | 1327 | if (hcd->state == HC_STATE_SUSPENDED) { |
56192531 AX |
1328 | xhci_dbg(xhci, "resume root hub\n"); |
1329 | usb_hcd_resume_root_hub(hcd); | |
1330 | } | |
1331 | ||
1332 | if ((temp & PORT_PLC) && (temp & PORT_PLS_MASK) == XDEV_RESUME) { | |
1333 | xhci_dbg(xhci, "port resume event for port %d\n", port_id); | |
1334 | ||
1335 | temp1 = xhci_readl(xhci, &xhci->op_regs->command); | |
1336 | if (!(temp1 & CMD_RUN)) { | |
1337 | xhci_warn(xhci, "xHC is not running.\n"); | |
1338 | goto cleanup; | |
1339 | } | |
1340 | ||
1341 | if (DEV_SUPERSPEED(temp)) { | |
d93814cf SS |
1342 | xhci_dbg(xhci, "remote wake SS port %d\n", port_id); |
1343 | xhci_test_and_clear_bit(xhci, port_array, | |
1344 | faked_port_index, PORT_PLC); | |
c9682dff AX |
1345 | xhci_set_link_state(xhci, port_array, faked_port_index, |
1346 | XDEV_U0); | |
d93814cf SS |
1347 | /* Need to wait until the next link state change |
1348 | * indicates the device is actually in U0. | |
1349 | */ | |
1350 | bogus_port_status = true; | |
1351 | goto cleanup; | |
56192531 AX |
1352 | } else { |
1353 | xhci_dbg(xhci, "resume HS port %d\n", port_id); | |
f6ff0ac8 | 1354 | bus_state->resume_done[faked_port_index] = jiffies + |
56192531 AX |
1355 | msecs_to_jiffies(20); |
1356 | mod_timer(&hcd->rh_timer, | |
f6ff0ac8 | 1357 | bus_state->resume_done[faked_port_index]); |
56192531 AX |
1358 | /* Do the rest in GetPortStatus */ |
1359 | } | |
1360 | } | |
d93814cf SS |
1361 | |
1362 | if ((temp & PORT_PLC) && (temp & PORT_PLS_MASK) == XDEV_U0 && | |
1363 | DEV_SUPERSPEED(temp)) { | |
1364 | xhci_dbg(xhci, "resume SS port %d finished\n", port_id); | |
1365 | slot_id = xhci_find_slot_id_by_port(hcd, xhci, | |
1366 | faked_port_index + 1); | |
1367 | if (slot_id && xhci->devs[slot_id]) | |
1368 | xhci_ring_device(xhci, slot_id); | |
1369 | } | |
56192531 | 1370 | |
6fd45621 AX |
1371 | if (hcd->speed != HCD_USB3) |
1372 | xhci_test_and_clear_bit(xhci, port_array, faked_port_index, | |
1373 | PORT_PLC); | |
1374 | ||
56192531 | 1375 | cleanup: |
0f2a7930 SS |
1376 | /* Update event ring dequeue pointer before dropping the lock */ |
1377 | inc_deq(xhci, xhci->event_ring, true); | |
0f2a7930 | 1378 | |
386139d7 SS |
1379 | /* Don't make the USB core poll the roothub if we got a bad port status |
1380 | * change event. Besides, at that point we can't tell which roothub | |
1381 | * (USB 2.0 or USB 3.0) to kick. | |
1382 | */ | |
1383 | if (bogus_port_status) | |
1384 | return; | |
1385 | ||
0f2a7930 SS |
1386 | spin_unlock(&xhci->lock); |
1387 | /* Pass this up to the core */ | |
f6ff0ac8 | 1388 | usb_hcd_poll_rh_status(hcd); |
0f2a7930 SS |
1389 | spin_lock(&xhci->lock); |
1390 | } | |
1391 | ||
d0e96f5a SS |
1392 | /* |
1393 | * This TD is defined by the TRBs starting at start_trb in start_seg and ending | |
1394 | * at end_trb, which may be in another segment. If the suspect DMA address is a | |
1395 | * TRB in this TD, this function returns that TRB's segment. Otherwise it | |
1396 | * returns 0. | |
1397 | */ | |
6648f29d | 1398 | struct xhci_segment *trb_in_td(struct xhci_segment *start_seg, |
d0e96f5a SS |
1399 | union xhci_trb *start_trb, |
1400 | union xhci_trb *end_trb, | |
1401 | dma_addr_t suspect_dma) | |
1402 | { | |
1403 | dma_addr_t start_dma; | |
1404 | dma_addr_t end_seg_dma; | |
1405 | dma_addr_t end_trb_dma; | |
1406 | struct xhci_segment *cur_seg; | |
1407 | ||
23e3be11 | 1408 | start_dma = xhci_trb_virt_to_dma(start_seg, start_trb); |
d0e96f5a SS |
1409 | cur_seg = start_seg; |
1410 | ||
1411 | do { | |
2fa88daa | 1412 | if (start_dma == 0) |
326b4810 | 1413 | return NULL; |
ae636747 | 1414 | /* We may get an event for a Link TRB in the middle of a TD */ |
23e3be11 | 1415 | end_seg_dma = xhci_trb_virt_to_dma(cur_seg, |
2fa88daa | 1416 | &cur_seg->trbs[TRBS_PER_SEGMENT - 1]); |
d0e96f5a | 1417 | /* If the end TRB isn't in this segment, this is set to 0 */ |
23e3be11 | 1418 | end_trb_dma = xhci_trb_virt_to_dma(cur_seg, end_trb); |
d0e96f5a SS |
1419 | |
1420 | if (end_trb_dma > 0) { | |
1421 | /* The end TRB is in this segment, so suspect should be here */ | |
1422 | if (start_dma <= end_trb_dma) { | |
1423 | if (suspect_dma >= start_dma && suspect_dma <= end_trb_dma) | |
1424 | return cur_seg; | |
1425 | } else { | |
1426 | /* Case for one segment with | |
1427 | * a TD wrapped around to the top | |
1428 | */ | |
1429 | if ((suspect_dma >= start_dma && | |
1430 | suspect_dma <= end_seg_dma) || | |
1431 | (suspect_dma >= cur_seg->dma && | |
1432 | suspect_dma <= end_trb_dma)) | |
1433 | return cur_seg; | |
1434 | } | |
326b4810 | 1435 | return NULL; |
d0e96f5a SS |
1436 | } else { |
1437 | /* Might still be somewhere in this segment */ | |
1438 | if (suspect_dma >= start_dma && suspect_dma <= end_seg_dma) | |
1439 | return cur_seg; | |
1440 | } | |
1441 | cur_seg = cur_seg->next; | |
23e3be11 | 1442 | start_dma = xhci_trb_virt_to_dma(cur_seg, &cur_seg->trbs[0]); |
2fa88daa | 1443 | } while (cur_seg != start_seg); |
d0e96f5a | 1444 | |
326b4810 | 1445 | return NULL; |
d0e96f5a SS |
1446 | } |
1447 | ||
bcef3fd5 SS |
1448 | static void xhci_cleanup_halted_endpoint(struct xhci_hcd *xhci, |
1449 | unsigned int slot_id, unsigned int ep_index, | |
e9df17eb | 1450 | unsigned int stream_id, |
bcef3fd5 SS |
1451 | struct xhci_td *td, union xhci_trb *event_trb) |
1452 | { | |
1453 | struct xhci_virt_ep *ep = &xhci->devs[slot_id]->eps[ep_index]; | |
1454 | ep->ep_state |= EP_HALTED; | |
1455 | ep->stopped_td = td; | |
1456 | ep->stopped_trb = event_trb; | |
e9df17eb | 1457 | ep->stopped_stream = stream_id; |
1624ae1c | 1458 | |
bcef3fd5 SS |
1459 | xhci_queue_reset_ep(xhci, slot_id, ep_index); |
1460 | xhci_cleanup_stalled_ring(xhci, td->urb->dev, ep_index); | |
1624ae1c SS |
1461 | |
1462 | ep->stopped_td = NULL; | |
1463 | ep->stopped_trb = NULL; | |
5e5cf6fc | 1464 | ep->stopped_stream = 0; |
1624ae1c | 1465 | |
bcef3fd5 SS |
1466 | xhci_ring_cmd_db(xhci); |
1467 | } | |
1468 | ||
1469 | /* Check if an error has halted the endpoint ring. The class driver will | |
1470 | * cleanup the halt for a non-default control endpoint if we indicate a stall. | |
1471 | * However, a babble and other errors also halt the endpoint ring, and the class | |
1472 | * driver won't clear the halt in that case, so we need to issue a Set Transfer | |
1473 | * Ring Dequeue Pointer command manually. | |
1474 | */ | |
1475 | static int xhci_requires_manual_halt_cleanup(struct xhci_hcd *xhci, | |
1476 | struct xhci_ep_ctx *ep_ctx, | |
1477 | unsigned int trb_comp_code) | |
1478 | { | |
1479 | /* TRB completion codes that may require a manual halt cleanup */ | |
1480 | if (trb_comp_code == COMP_TX_ERR || | |
1481 | trb_comp_code == COMP_BABBLE || | |
1482 | trb_comp_code == COMP_SPLIT_ERR) | |
1483 | /* The 0.96 spec says a babbling control endpoint | |
1484 | * is not halted. The 0.96 spec says it is. Some HW | |
1485 | * claims to be 0.95 compliant, but it halts the control | |
1486 | * endpoint anyway. Check if a babble halted the | |
1487 | * endpoint. | |
1488 | */ | |
f5960b69 ME |
1489 | if ((ep_ctx->ep_info & cpu_to_le32(EP_STATE_MASK)) == |
1490 | cpu_to_le32(EP_STATE_HALTED)) | |
bcef3fd5 SS |
1491 | return 1; |
1492 | ||
1493 | return 0; | |
1494 | } | |
1495 | ||
b45b5069 SS |
1496 | int xhci_is_vendor_info_code(struct xhci_hcd *xhci, unsigned int trb_comp_code) |
1497 | { | |
1498 | if (trb_comp_code >= 224 && trb_comp_code <= 255) { | |
1499 | /* Vendor defined "informational" completion code, | |
1500 | * treat as not-an-error. | |
1501 | */ | |
1502 | xhci_dbg(xhci, "Vendor defined info completion code %u\n", | |
1503 | trb_comp_code); | |
1504 | xhci_dbg(xhci, "Treating code as success.\n"); | |
1505 | return 1; | |
1506 | } | |
1507 | return 0; | |
1508 | } | |
1509 | ||
4422da61 AX |
1510 | /* |
1511 | * Finish the td processing, remove the td from td list; | |
1512 | * Return 1 if the urb can be given back. | |
1513 | */ | |
1514 | static int finish_td(struct xhci_hcd *xhci, struct xhci_td *td, | |
1515 | union xhci_trb *event_trb, struct xhci_transfer_event *event, | |
1516 | struct xhci_virt_ep *ep, int *status, bool skip) | |
1517 | { | |
1518 | struct xhci_virt_device *xdev; | |
1519 | struct xhci_ring *ep_ring; | |
1520 | unsigned int slot_id; | |
1521 | int ep_index; | |
1522 | struct urb *urb = NULL; | |
1523 | struct xhci_ep_ctx *ep_ctx; | |
1524 | int ret = 0; | |
8e51adcc | 1525 | struct urb_priv *urb_priv; |
4422da61 AX |
1526 | u32 trb_comp_code; |
1527 | ||
28ccd296 | 1528 | slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->flags)); |
4422da61 | 1529 | xdev = xhci->devs[slot_id]; |
28ccd296 ME |
1530 | ep_index = TRB_TO_EP_ID(le32_to_cpu(event->flags)) - 1; |
1531 | ep_ring = xhci_dma_to_transfer_ring(ep, le64_to_cpu(event->buffer)); | |
4422da61 | 1532 | ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index); |
28ccd296 | 1533 | trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len)); |
4422da61 AX |
1534 | |
1535 | if (skip) | |
1536 | goto td_cleanup; | |
1537 | ||
1538 | if (trb_comp_code == COMP_STOP_INVAL || | |
1539 | trb_comp_code == COMP_STOP) { | |
1540 | /* The Endpoint Stop Command completion will take care of any | |
1541 | * stopped TDs. A stopped TD may be restarted, so don't update | |
1542 | * the ring dequeue pointer or take this TD off any lists yet. | |
1543 | */ | |
1544 | ep->stopped_td = td; | |
1545 | ep->stopped_trb = event_trb; | |
1546 | return 0; | |
1547 | } else { | |
1548 | if (trb_comp_code == COMP_STALL) { | |
1549 | /* The transfer is completed from the driver's | |
1550 | * perspective, but we need to issue a set dequeue | |
1551 | * command for this stalled endpoint to move the dequeue | |
1552 | * pointer past the TD. We can't do that here because | |
1553 | * the halt condition must be cleared first. Let the | |
1554 | * USB class driver clear the stall later. | |
1555 | */ | |
1556 | ep->stopped_td = td; | |
1557 | ep->stopped_trb = event_trb; | |
1558 | ep->stopped_stream = ep_ring->stream_id; | |
1559 | } else if (xhci_requires_manual_halt_cleanup(xhci, | |
1560 | ep_ctx, trb_comp_code)) { | |
1561 | /* Other types of errors halt the endpoint, but the | |
1562 | * class driver doesn't call usb_reset_endpoint() unless | |
1563 | * the error is -EPIPE. Clear the halted status in the | |
1564 | * xHCI hardware manually. | |
1565 | */ | |
1566 | xhci_cleanup_halted_endpoint(xhci, | |
1567 | slot_id, ep_index, ep_ring->stream_id, | |
1568 | td, event_trb); | |
1569 | } else { | |
1570 | /* Update ring dequeue pointer */ | |
1571 | while (ep_ring->dequeue != td->last_trb) | |
1572 | inc_deq(xhci, ep_ring, false); | |
1573 | inc_deq(xhci, ep_ring, false); | |
1574 | } | |
1575 | ||
1576 | td_cleanup: | |
1577 | /* Clean up the endpoint's TD list */ | |
1578 | urb = td->urb; | |
8e51adcc | 1579 | urb_priv = urb->hcpriv; |
4422da61 AX |
1580 | |
1581 | /* Do one last check of the actual transfer length. | |
1582 | * If the host controller said we transferred more data than | |
1583 | * the buffer length, urb->actual_length will be a very big | |
1584 | * number (since it's unsigned). Play it safe and say we didn't | |
1585 | * transfer anything. | |
1586 | */ | |
1587 | if (urb->actual_length > urb->transfer_buffer_length) { | |
1588 | xhci_warn(xhci, "URB transfer length is wrong, " | |
1589 | "xHC issue? req. len = %u, " | |
1590 | "act. len = %u\n", | |
1591 | urb->transfer_buffer_length, | |
1592 | urb->actual_length); | |
1593 | urb->actual_length = 0; | |
1594 | if (td->urb->transfer_flags & URB_SHORT_NOT_OK) | |
1595 | *status = -EREMOTEIO; | |
1596 | else | |
1597 | *status = 0; | |
1598 | } | |
585df1d9 | 1599 | list_del_init(&td->td_list); |
4422da61 AX |
1600 | /* Was this TD slated to be cancelled but completed anyway? */ |
1601 | if (!list_empty(&td->cancelled_td_list)) | |
585df1d9 | 1602 | list_del_init(&td->cancelled_td_list); |
4422da61 | 1603 | |
8e51adcc AX |
1604 | urb_priv->td_cnt++; |
1605 | /* Giveback the urb when all the tds are completed */ | |
c41136b0 | 1606 | if (urb_priv->td_cnt == urb_priv->length) { |
8e51adcc | 1607 | ret = 1; |
c41136b0 AX |
1608 | if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { |
1609 | xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs--; | |
1610 | if (xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs | |
1611 | == 0) { | |
1612 | if (xhci->quirks & XHCI_AMD_PLL_FIX) | |
1613 | usb_amd_quirk_pll_enable(); | |
1614 | } | |
1615 | } | |
1616 | } | |
4422da61 AX |
1617 | } |
1618 | ||
1619 | return ret; | |
1620 | } | |
1621 | ||
8af56be1 AX |
1622 | /* |
1623 | * Process control tds, update urb status and actual_length. | |
1624 | */ | |
1625 | static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td, | |
1626 | union xhci_trb *event_trb, struct xhci_transfer_event *event, | |
1627 | struct xhci_virt_ep *ep, int *status) | |
1628 | { | |
1629 | struct xhci_virt_device *xdev; | |
1630 | struct xhci_ring *ep_ring; | |
1631 | unsigned int slot_id; | |
1632 | int ep_index; | |
1633 | struct xhci_ep_ctx *ep_ctx; | |
1634 | u32 trb_comp_code; | |
1635 | ||
28ccd296 | 1636 | slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->flags)); |
8af56be1 | 1637 | xdev = xhci->devs[slot_id]; |
28ccd296 ME |
1638 | ep_index = TRB_TO_EP_ID(le32_to_cpu(event->flags)) - 1; |
1639 | ep_ring = xhci_dma_to_transfer_ring(ep, le64_to_cpu(event->buffer)); | |
8af56be1 | 1640 | ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index); |
28ccd296 | 1641 | trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len)); |
8af56be1 | 1642 | |
8af56be1 AX |
1643 | switch (trb_comp_code) { |
1644 | case COMP_SUCCESS: | |
1645 | if (event_trb == ep_ring->dequeue) { | |
1646 | xhci_warn(xhci, "WARN: Success on ctrl setup TRB " | |
1647 | "without IOC set??\n"); | |
1648 | *status = -ESHUTDOWN; | |
1649 | } else if (event_trb != td->last_trb) { | |
1650 | xhci_warn(xhci, "WARN: Success on ctrl data TRB " | |
1651 | "without IOC set??\n"); | |
1652 | *status = -ESHUTDOWN; | |
1653 | } else { | |
8af56be1 AX |
1654 | *status = 0; |
1655 | } | |
1656 | break; | |
1657 | case COMP_SHORT_TX: | |
8af56be1 AX |
1658 | if (td->urb->transfer_flags & URB_SHORT_NOT_OK) |
1659 | *status = -EREMOTEIO; | |
1660 | else | |
1661 | *status = 0; | |
1662 | break; | |
3abeca99 SS |
1663 | case COMP_STOP_INVAL: |
1664 | case COMP_STOP: | |
1665 | return finish_td(xhci, td, event_trb, event, ep, status, false); | |
8af56be1 AX |
1666 | default: |
1667 | if (!xhci_requires_manual_halt_cleanup(xhci, | |
1668 | ep_ctx, trb_comp_code)) | |
1669 | break; | |
1670 | xhci_dbg(xhci, "TRB error code %u, " | |
1671 | "halted endpoint index = %u\n", | |
1672 | trb_comp_code, ep_index); | |
1673 | /* else fall through */ | |
1674 | case COMP_STALL: | |
1675 | /* Did we transfer part of the data (middle) phase? */ | |
1676 | if (event_trb != ep_ring->dequeue && | |
1677 | event_trb != td->last_trb) | |
1678 | td->urb->actual_length = | |
1679 | td->urb->transfer_buffer_length | |
28ccd296 | 1680 | - TRB_LEN(le32_to_cpu(event->transfer_len)); |
8af56be1 AX |
1681 | else |
1682 | td->urb->actual_length = 0; | |
1683 | ||
1684 | xhci_cleanup_halted_endpoint(xhci, | |
1685 | slot_id, ep_index, 0, td, event_trb); | |
1686 | return finish_td(xhci, td, event_trb, event, ep, status, true); | |
1687 | } | |
1688 | /* | |
1689 | * Did we transfer any data, despite the errors that might have | |
1690 | * happened? I.e. did we get past the setup stage? | |
1691 | */ | |
1692 | if (event_trb != ep_ring->dequeue) { | |
1693 | /* The event was for the status stage */ | |
1694 | if (event_trb == td->last_trb) { | |
1695 | if (td->urb->actual_length != 0) { | |
1696 | /* Don't overwrite a previously set error code | |
1697 | */ | |
1698 | if ((*status == -EINPROGRESS || *status == 0) && | |
1699 | (td->urb->transfer_flags | |
1700 | & URB_SHORT_NOT_OK)) | |
1701 | /* Did we already see a short data | |
1702 | * stage? */ | |
1703 | *status = -EREMOTEIO; | |
1704 | } else { | |
1705 | td->urb->actual_length = | |
1706 | td->urb->transfer_buffer_length; | |
1707 | } | |
1708 | } else { | |
1709 | /* Maybe the event was for the data stage? */ | |
3abeca99 SS |
1710 | td->urb->actual_length = |
1711 | td->urb->transfer_buffer_length - | |
1712 | TRB_LEN(le32_to_cpu(event->transfer_len)); | |
1713 | xhci_dbg(xhci, "Waiting for status " | |
1714 | "stage event\n"); | |
1715 | return 0; | |
8af56be1 AX |
1716 | } |
1717 | } | |
1718 | ||
1719 | return finish_td(xhci, td, event_trb, event, ep, status, false); | |
1720 | } | |
1721 | ||
04e51901 AX |
1722 | /* |
1723 | * Process isochronous tds, update urb packet status and actual_length. | |
1724 | */ | |
1725 | static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td, | |
1726 | union xhci_trb *event_trb, struct xhci_transfer_event *event, | |
1727 | struct xhci_virt_ep *ep, int *status) | |
1728 | { | |
1729 | struct xhci_ring *ep_ring; | |
1730 | struct urb_priv *urb_priv; | |
1731 | int idx; | |
1732 | int len = 0; | |
04e51901 AX |
1733 | union xhci_trb *cur_trb; |
1734 | struct xhci_segment *cur_seg; | |
926008c9 | 1735 | struct usb_iso_packet_descriptor *frame; |
04e51901 | 1736 | u32 trb_comp_code; |
926008c9 | 1737 | bool skip_td = false; |
04e51901 | 1738 | |
28ccd296 ME |
1739 | ep_ring = xhci_dma_to_transfer_ring(ep, le64_to_cpu(event->buffer)); |
1740 | trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len)); | |
04e51901 AX |
1741 | urb_priv = td->urb->hcpriv; |
1742 | idx = urb_priv->td_cnt; | |
926008c9 | 1743 | frame = &td->urb->iso_frame_desc[idx]; |
04e51901 | 1744 | |
926008c9 DT |
1745 | /* handle completion code */ |
1746 | switch (trb_comp_code) { | |
1747 | case COMP_SUCCESS: | |
1748 | frame->status = 0; | |
926008c9 DT |
1749 | break; |
1750 | case COMP_SHORT_TX: | |
1751 | frame->status = td->urb->transfer_flags & URB_SHORT_NOT_OK ? | |
1752 | -EREMOTEIO : 0; | |
1753 | break; | |
1754 | case COMP_BW_OVER: | |
1755 | frame->status = -ECOMM; | |
1756 | skip_td = true; | |
1757 | break; | |
1758 | case COMP_BUFF_OVER: | |
1759 | case COMP_BABBLE: | |
1760 | frame->status = -EOVERFLOW; | |
1761 | skip_td = true; | |
1762 | break; | |
f6ba6fe2 | 1763 | case COMP_DEV_ERR: |
926008c9 DT |
1764 | case COMP_STALL: |
1765 | frame->status = -EPROTO; | |
1766 | skip_td = true; | |
1767 | break; | |
1768 | case COMP_STOP: | |
1769 | case COMP_STOP_INVAL: | |
1770 | break; | |
1771 | default: | |
1772 | frame->status = -1; | |
1773 | break; | |
04e51901 AX |
1774 | } |
1775 | ||
926008c9 DT |
1776 | if (trb_comp_code == COMP_SUCCESS || skip_td) { |
1777 | frame->actual_length = frame->length; | |
1778 | td->urb->actual_length += frame->length; | |
04e51901 AX |
1779 | } else { |
1780 | for (cur_trb = ep_ring->dequeue, | |
1781 | cur_seg = ep_ring->deq_seg; cur_trb != event_trb; | |
1782 | next_trb(xhci, ep_ring, &cur_seg, &cur_trb)) { | |
f5960b69 ME |
1783 | if (!TRB_TYPE_NOOP_LE32(cur_trb->generic.field[3]) && |
1784 | !TRB_TYPE_LINK_LE32(cur_trb->generic.field[3])) | |
28ccd296 | 1785 | len += TRB_LEN(le32_to_cpu(cur_trb->generic.field[2])); |
04e51901 | 1786 | } |
28ccd296 ME |
1787 | len += TRB_LEN(le32_to_cpu(cur_trb->generic.field[2])) - |
1788 | TRB_LEN(le32_to_cpu(event->transfer_len)); | |
04e51901 AX |
1789 | |
1790 | if (trb_comp_code != COMP_STOP_INVAL) { | |
926008c9 | 1791 | frame->actual_length = len; |
04e51901 AX |
1792 | td->urb->actual_length += len; |
1793 | } | |
1794 | } | |
1795 | ||
04e51901 AX |
1796 | return finish_td(xhci, td, event_trb, event, ep, status, false); |
1797 | } | |
1798 | ||
926008c9 DT |
1799 | static int skip_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td, |
1800 | struct xhci_transfer_event *event, | |
1801 | struct xhci_virt_ep *ep, int *status) | |
1802 | { | |
1803 | struct xhci_ring *ep_ring; | |
1804 | struct urb_priv *urb_priv; | |
1805 | struct usb_iso_packet_descriptor *frame; | |
1806 | int idx; | |
1807 | ||
f6975314 | 1808 | ep_ring = xhci_dma_to_transfer_ring(ep, le64_to_cpu(event->buffer)); |
926008c9 DT |
1809 | urb_priv = td->urb->hcpriv; |
1810 | idx = urb_priv->td_cnt; | |
1811 | frame = &td->urb->iso_frame_desc[idx]; | |
1812 | ||
b3df3f9c | 1813 | /* The transfer is partly done. */ |
926008c9 DT |
1814 | frame->status = -EXDEV; |
1815 | ||
1816 | /* calc actual length */ | |
1817 | frame->actual_length = 0; | |
1818 | ||
1819 | /* Update ring dequeue pointer */ | |
1820 | while (ep_ring->dequeue != td->last_trb) | |
1821 | inc_deq(xhci, ep_ring, false); | |
1822 | inc_deq(xhci, ep_ring, false); | |
1823 | ||
1824 | return finish_td(xhci, td, NULL, event, ep, status, true); | |
1825 | } | |
1826 | ||
22405ed2 AX |
1827 | /* |
1828 | * Process bulk and interrupt tds, update urb status and actual_length. | |
1829 | */ | |
1830 | static int process_bulk_intr_td(struct xhci_hcd *xhci, struct xhci_td *td, | |
1831 | union xhci_trb *event_trb, struct xhci_transfer_event *event, | |
1832 | struct xhci_virt_ep *ep, int *status) | |
1833 | { | |
1834 | struct xhci_ring *ep_ring; | |
1835 | union xhci_trb *cur_trb; | |
1836 | struct xhci_segment *cur_seg; | |
1837 | u32 trb_comp_code; | |
1838 | ||
28ccd296 ME |
1839 | ep_ring = xhci_dma_to_transfer_ring(ep, le64_to_cpu(event->buffer)); |
1840 | trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len)); | |
22405ed2 AX |
1841 | |
1842 | switch (trb_comp_code) { | |
1843 | case COMP_SUCCESS: | |
1844 | /* Double check that the HW transferred everything. */ | |
1845 | if (event_trb != td->last_trb) { | |
1846 | xhci_warn(xhci, "WARN Successful completion " | |
1847 | "on short TX\n"); | |
1848 | if (td->urb->transfer_flags & URB_SHORT_NOT_OK) | |
1849 | *status = -EREMOTEIO; | |
1850 | else | |
1851 | *status = 0; | |
1852 | } else { | |
22405ed2 AX |
1853 | *status = 0; |
1854 | } | |
1855 | break; | |
1856 | case COMP_SHORT_TX: | |
1857 | if (td->urb->transfer_flags & URB_SHORT_NOT_OK) | |
1858 | *status = -EREMOTEIO; | |
1859 | else | |
1860 | *status = 0; | |
1861 | break; | |
1862 | default: | |
1863 | /* Others already handled above */ | |
1864 | break; | |
1865 | } | |
f444ff27 SS |
1866 | if (trb_comp_code == COMP_SHORT_TX) |
1867 | xhci_dbg(xhci, "ep %#x - asked for %d bytes, " | |
1868 | "%d bytes untransferred\n", | |
1869 | td->urb->ep->desc.bEndpointAddress, | |
1870 | td->urb->transfer_buffer_length, | |
1871 | TRB_LEN(le32_to_cpu(event->transfer_len))); | |
22405ed2 AX |
1872 | /* Fast path - was this the last TRB in the TD for this URB? */ |
1873 | if (event_trb == td->last_trb) { | |
28ccd296 | 1874 | if (TRB_LEN(le32_to_cpu(event->transfer_len)) != 0) { |
22405ed2 AX |
1875 | td->urb->actual_length = |
1876 | td->urb->transfer_buffer_length - | |
28ccd296 | 1877 | TRB_LEN(le32_to_cpu(event->transfer_len)); |
22405ed2 AX |
1878 | if (td->urb->transfer_buffer_length < |
1879 | td->urb->actual_length) { | |
1880 | xhci_warn(xhci, "HC gave bad length " | |
1881 | "of %d bytes left\n", | |
28ccd296 | 1882 | TRB_LEN(le32_to_cpu(event->transfer_len))); |
22405ed2 AX |
1883 | td->urb->actual_length = 0; |
1884 | if (td->urb->transfer_flags & URB_SHORT_NOT_OK) | |
1885 | *status = -EREMOTEIO; | |
1886 | else | |
1887 | *status = 0; | |
1888 | } | |
1889 | /* Don't overwrite a previously set error code */ | |
1890 | if (*status == -EINPROGRESS) { | |
1891 | if (td->urb->transfer_flags & URB_SHORT_NOT_OK) | |
1892 | *status = -EREMOTEIO; | |
1893 | else | |
1894 | *status = 0; | |
1895 | } | |
1896 | } else { | |
1897 | td->urb->actual_length = | |
1898 | td->urb->transfer_buffer_length; | |
1899 | /* Ignore a short packet completion if the | |
1900 | * untransferred length was zero. | |
1901 | */ | |
1902 | if (*status == -EREMOTEIO) | |
1903 | *status = 0; | |
1904 | } | |
1905 | } else { | |
1906 | /* Slow path - walk the list, starting from the dequeue | |
1907 | * pointer, to get the actual length transferred. | |
1908 | */ | |
1909 | td->urb->actual_length = 0; | |
1910 | for (cur_trb = ep_ring->dequeue, cur_seg = ep_ring->deq_seg; | |
1911 | cur_trb != event_trb; | |
1912 | next_trb(xhci, ep_ring, &cur_seg, &cur_trb)) { | |
f5960b69 ME |
1913 | if (!TRB_TYPE_NOOP_LE32(cur_trb->generic.field[3]) && |
1914 | !TRB_TYPE_LINK_LE32(cur_trb->generic.field[3])) | |
22405ed2 | 1915 | td->urb->actual_length += |
28ccd296 | 1916 | TRB_LEN(le32_to_cpu(cur_trb->generic.field[2])); |
22405ed2 AX |
1917 | } |
1918 | /* If the ring didn't stop on a Link or No-op TRB, add | |
1919 | * in the actual bytes transferred from the Normal TRB | |
1920 | */ | |
1921 | if (trb_comp_code != COMP_STOP_INVAL) | |
1922 | td->urb->actual_length += | |
28ccd296 ME |
1923 | TRB_LEN(le32_to_cpu(cur_trb->generic.field[2])) - |
1924 | TRB_LEN(le32_to_cpu(event->transfer_len)); | |
22405ed2 AX |
1925 | } |
1926 | ||
1927 | return finish_td(xhci, td, event_trb, event, ep, status, false); | |
1928 | } | |
1929 | ||
d0e96f5a SS |
1930 | /* |
1931 | * If this function returns an error condition, it means it got a Transfer | |
1932 | * event with a corrupted Slot ID, Endpoint ID, or TRB DMA address. | |
1933 | * At this point, the host controller is probably hosed and should be reset. | |
1934 | */ | |
1935 | static int handle_tx_event(struct xhci_hcd *xhci, | |
1936 | struct xhci_transfer_event *event) | |
1937 | { | |
1938 | struct xhci_virt_device *xdev; | |
63a0d9ab | 1939 | struct xhci_virt_ep *ep; |
d0e96f5a | 1940 | struct xhci_ring *ep_ring; |
82d1009f | 1941 | unsigned int slot_id; |
d0e96f5a | 1942 | int ep_index; |
326b4810 | 1943 | struct xhci_td *td = NULL; |
d0e96f5a SS |
1944 | dma_addr_t event_dma; |
1945 | struct xhci_segment *event_seg; | |
1946 | union xhci_trb *event_trb; | |
326b4810 | 1947 | struct urb *urb = NULL; |
d0e96f5a | 1948 | int status = -EINPROGRESS; |
8e51adcc | 1949 | struct urb_priv *urb_priv; |
d115b048 | 1950 | struct xhci_ep_ctx *ep_ctx; |
c2d7b49f | 1951 | struct list_head *tmp; |
66d1eebc | 1952 | u32 trb_comp_code; |
4422da61 | 1953 | int ret = 0; |
c2d7b49f | 1954 | int td_num = 0; |
d0e96f5a | 1955 | |
28ccd296 | 1956 | slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->flags)); |
82d1009f | 1957 | xdev = xhci->devs[slot_id]; |
d0e96f5a SS |
1958 | if (!xdev) { |
1959 | xhci_err(xhci, "ERROR Transfer event pointed to bad slot\n"); | |
9258c0b2 | 1960 | xhci_err(xhci, "@%016llx %08x %08x %08x %08x\n", |
e910b440 SS |
1961 | (unsigned long long) xhci_trb_virt_to_dma( |
1962 | xhci->event_ring->deq_seg, | |
9258c0b2 SS |
1963 | xhci->event_ring->dequeue), |
1964 | lower_32_bits(le64_to_cpu(event->buffer)), | |
1965 | upper_32_bits(le64_to_cpu(event->buffer)), | |
1966 | le32_to_cpu(event->transfer_len), | |
1967 | le32_to_cpu(event->flags)); | |
1968 | xhci_dbg(xhci, "Event ring:\n"); | |
1969 | xhci_debug_segment(xhci, xhci->event_ring->deq_seg); | |
d0e96f5a SS |
1970 | return -ENODEV; |
1971 | } | |
1972 | ||
1973 | /* Endpoint ID is 1 based, our index is zero based */ | |
28ccd296 | 1974 | ep_index = TRB_TO_EP_ID(le32_to_cpu(event->flags)) - 1; |
63a0d9ab | 1975 | ep = &xdev->eps[ep_index]; |
28ccd296 | 1976 | ep_ring = xhci_dma_to_transfer_ring(ep, le64_to_cpu(event->buffer)); |
d115b048 | 1977 | ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index); |
986a92d4 | 1978 | if (!ep_ring || |
28ccd296 ME |
1979 | (le32_to_cpu(ep_ctx->ep_info) & EP_STATE_MASK) == |
1980 | EP_STATE_DISABLED) { | |
e9df17eb SS |
1981 | xhci_err(xhci, "ERROR Transfer event for disabled endpoint " |
1982 | "or incorrect stream ring\n"); | |
9258c0b2 | 1983 | xhci_err(xhci, "@%016llx %08x %08x %08x %08x\n", |
e910b440 SS |
1984 | (unsigned long long) xhci_trb_virt_to_dma( |
1985 | xhci->event_ring->deq_seg, | |
9258c0b2 SS |
1986 | xhci->event_ring->dequeue), |
1987 | lower_32_bits(le64_to_cpu(event->buffer)), | |
1988 | upper_32_bits(le64_to_cpu(event->buffer)), | |
1989 | le32_to_cpu(event->transfer_len), | |
1990 | le32_to_cpu(event->flags)); | |
1991 | xhci_dbg(xhci, "Event ring:\n"); | |
1992 | xhci_debug_segment(xhci, xhci->event_ring->deq_seg); | |
d0e96f5a SS |
1993 | return -ENODEV; |
1994 | } | |
1995 | ||
c2d7b49f AX |
1996 | /* Count current td numbers if ep->skip is set */ |
1997 | if (ep->skip) { | |
1998 | list_for_each(tmp, &ep_ring->td_list) | |
1999 | td_num++; | |
2000 | } | |
2001 | ||
28ccd296 ME |
2002 | event_dma = le64_to_cpu(event->buffer); |
2003 | trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len)); | |
986a92d4 | 2004 | /* Look for common error cases */ |
66d1eebc | 2005 | switch (trb_comp_code) { |
b10de142 SS |
2006 | /* Skip codes that require special handling depending on |
2007 | * transfer type | |
2008 | */ | |
2009 | case COMP_SUCCESS: | |
2010 | case COMP_SHORT_TX: | |
2011 | break; | |
ae636747 SS |
2012 | case COMP_STOP: |
2013 | xhci_dbg(xhci, "Stopped on Transfer TRB\n"); | |
2014 | break; | |
2015 | case COMP_STOP_INVAL: | |
2016 | xhci_dbg(xhci, "Stopped on No-op or Link TRB\n"); | |
2017 | break; | |
b10de142 | 2018 | case COMP_STALL: |
2a9227a5 | 2019 | xhci_dbg(xhci, "Stalled endpoint\n"); |
63a0d9ab | 2020 | ep->ep_state |= EP_HALTED; |
b10de142 SS |
2021 | status = -EPIPE; |
2022 | break; | |
2023 | case COMP_TRB_ERR: | |
2024 | xhci_warn(xhci, "WARN: TRB error on endpoint\n"); | |
2025 | status = -EILSEQ; | |
2026 | break; | |
ec74e403 | 2027 | case COMP_SPLIT_ERR: |
b10de142 | 2028 | case COMP_TX_ERR: |
2a9227a5 | 2029 | xhci_dbg(xhci, "Transfer error on endpoint\n"); |
b10de142 SS |
2030 | status = -EPROTO; |
2031 | break; | |
4a73143c | 2032 | case COMP_BABBLE: |
2a9227a5 | 2033 | xhci_dbg(xhci, "Babble error on endpoint\n"); |
4a73143c SS |
2034 | status = -EOVERFLOW; |
2035 | break; | |
b10de142 SS |
2036 | case COMP_DB_ERR: |
2037 | xhci_warn(xhci, "WARN: HC couldn't access mem fast enough\n"); | |
2038 | status = -ENOSR; | |
2039 | break; | |
986a92d4 AX |
2040 | case COMP_BW_OVER: |
2041 | xhci_warn(xhci, "WARN: bandwidth overrun event on endpoint\n"); | |
2042 | break; | |
2043 | case COMP_BUFF_OVER: | |
2044 | xhci_warn(xhci, "WARN: buffer overrun event on endpoint\n"); | |
2045 | break; | |
2046 | case COMP_UNDERRUN: | |
2047 | /* | |
2048 | * When the Isoch ring is empty, the xHC will generate | |
2049 | * a Ring Overrun Event for IN Isoch endpoint or Ring | |
2050 | * Underrun Event for OUT Isoch endpoint. | |
2051 | */ | |
2052 | xhci_dbg(xhci, "underrun event on endpoint\n"); | |
2053 | if (!list_empty(&ep_ring->td_list)) | |
2054 | xhci_dbg(xhci, "Underrun Event for slot %d ep %d " | |
2055 | "still with TDs queued?\n", | |
28ccd296 ME |
2056 | TRB_TO_SLOT_ID(le32_to_cpu(event->flags)), |
2057 | ep_index); | |
986a92d4 AX |
2058 | goto cleanup; |
2059 | case COMP_OVERRUN: | |
2060 | xhci_dbg(xhci, "overrun event on endpoint\n"); | |
2061 | if (!list_empty(&ep_ring->td_list)) | |
2062 | xhci_dbg(xhci, "Overrun Event for slot %d ep %d " | |
2063 | "still with TDs queued?\n", | |
28ccd296 ME |
2064 | TRB_TO_SLOT_ID(le32_to_cpu(event->flags)), |
2065 | ep_index); | |
986a92d4 | 2066 | goto cleanup; |
f6ba6fe2 AH |
2067 | case COMP_DEV_ERR: |
2068 | xhci_warn(xhci, "WARN: detect an incompatible device"); | |
2069 | status = -EPROTO; | |
2070 | break; | |
d18240db AX |
2071 | case COMP_MISSED_INT: |
2072 | /* | |
2073 | * When encounter missed service error, one or more isoc tds | |
2074 | * may be missed by xHC. | |
2075 | * Set skip flag of the ep_ring; Complete the missed tds as | |
2076 | * short transfer when process the ep_ring next time. | |
2077 | */ | |
2078 | ep->skip = true; | |
2079 | xhci_dbg(xhci, "Miss service interval error, set skip flag\n"); | |
2080 | goto cleanup; | |
b10de142 | 2081 | default: |
b45b5069 | 2082 | if (xhci_is_vendor_info_code(xhci, trb_comp_code)) { |
5ad6a529 SS |
2083 | status = 0; |
2084 | break; | |
2085 | } | |
986a92d4 AX |
2086 | xhci_warn(xhci, "ERROR Unknown event condition, HC probably " |
2087 | "busted\n"); | |
2088 | goto cleanup; | |
2089 | } | |
2090 | ||
d18240db AX |
2091 | do { |
2092 | /* This TRB should be in the TD at the head of this ring's | |
2093 | * TD list. | |
2094 | */ | |
2095 | if (list_empty(&ep_ring->td_list)) { | |
2096 | xhci_warn(xhci, "WARN Event TRB for slot %d ep %d " | |
2097 | "with no TDs queued?\n", | |
28ccd296 ME |
2098 | TRB_TO_SLOT_ID(le32_to_cpu(event->flags)), |
2099 | ep_index); | |
d18240db | 2100 | xhci_dbg(xhci, "Event TRB with TRB type ID %u\n", |
f5960b69 ME |
2101 | (le32_to_cpu(event->flags) & |
2102 | TRB_TYPE_BITMASK)>>10); | |
d18240db AX |
2103 | xhci_print_trb_offsets(xhci, (union xhci_trb *) event); |
2104 | if (ep->skip) { | |
2105 | ep->skip = false; | |
2106 | xhci_dbg(xhci, "td_list is empty while skip " | |
2107 | "flag set. Clear skip flag.\n"); | |
2108 | } | |
2109 | ret = 0; | |
2110 | goto cleanup; | |
2111 | } | |
986a92d4 | 2112 | |
c2d7b49f AX |
2113 | /* We've skipped all the TDs on the ep ring when ep->skip set */ |
2114 | if (ep->skip && td_num == 0) { | |
2115 | ep->skip = false; | |
2116 | xhci_dbg(xhci, "All tds on the ep_ring skipped. " | |
2117 | "Clear skip flag.\n"); | |
2118 | ret = 0; | |
2119 | goto cleanup; | |
2120 | } | |
2121 | ||
d18240db | 2122 | td = list_entry(ep_ring->td_list.next, struct xhci_td, td_list); |
c2d7b49f AX |
2123 | if (ep->skip) |
2124 | td_num--; | |
926008c9 | 2125 | |
d18240db AX |
2126 | /* Is this a TRB in the currently executing TD? */ |
2127 | event_seg = trb_in_td(ep_ring->deq_seg, ep_ring->dequeue, | |
2128 | td->last_trb, event_dma); | |
e1cf486d AH |
2129 | |
2130 | /* | |
2131 | * Skip the Force Stopped Event. The event_trb(event_dma) of FSE | |
2132 | * is not in the current TD pointed by ep_ring->dequeue because | |
2133 | * that the hardware dequeue pointer still at the previous TRB | |
2134 | * of the current TD. The previous TRB maybe a Link TD or the | |
2135 | * last TRB of the previous TD. The command completion handle | |
2136 | * will take care the rest. | |
2137 | */ | |
2138 | if (!event_seg && trb_comp_code == COMP_STOP_INVAL) { | |
2139 | ret = 0; | |
2140 | goto cleanup; | |
2141 | } | |
2142 | ||
926008c9 DT |
2143 | if (!event_seg) { |
2144 | if (!ep->skip || | |
2145 | !usb_endpoint_xfer_isoc(&td->urb->ep->desc)) { | |
ad808333 SS |
2146 | /* Some host controllers give a spurious |
2147 | * successful event after a short transfer. | |
2148 | * Ignore it. | |
2149 | */ | |
2150 | if ((xhci->quirks & XHCI_SPURIOUS_SUCCESS) && | |
2151 | ep_ring->last_td_was_short) { | |
2152 | ep_ring->last_td_was_short = false; | |
2153 | ret = 0; | |
2154 | goto cleanup; | |
2155 | } | |
926008c9 DT |
2156 | /* HC is busted, give up! */ |
2157 | xhci_err(xhci, | |
2158 | "ERROR Transfer event TRB DMA ptr not " | |
2159 | "part of current TD\n"); | |
2160 | return -ESHUTDOWN; | |
2161 | } | |
2162 | ||
2163 | ret = skip_isoc_td(xhci, td, event, ep, &status); | |
2164 | goto cleanup; | |
2165 | } | |
ad808333 SS |
2166 | if (trb_comp_code == COMP_SHORT_TX) |
2167 | ep_ring->last_td_was_short = true; | |
2168 | else | |
2169 | ep_ring->last_td_was_short = false; | |
926008c9 DT |
2170 | |
2171 | if (ep->skip) { | |
d18240db AX |
2172 | xhci_dbg(xhci, "Found td. Clear skip flag.\n"); |
2173 | ep->skip = false; | |
2174 | } | |
678539cf | 2175 | |
926008c9 DT |
2176 | event_trb = &event_seg->trbs[(event_dma - event_seg->dma) / |
2177 | sizeof(*event_trb)]; | |
2178 | /* | |
2179 | * No-op TRB should not trigger interrupts. | |
2180 | * If event_trb is a no-op TRB, it means the | |
2181 | * corresponding TD has been cancelled. Just ignore | |
2182 | * the TD. | |
2183 | */ | |
f5960b69 | 2184 | if (TRB_TYPE_NOOP_LE32(event_trb->generic.field[3])) { |
926008c9 DT |
2185 | xhci_dbg(xhci, |
2186 | "event_trb is a no-op TRB. Skip it\n"); | |
2187 | goto cleanup; | |
d18240db | 2188 | } |
4422da61 | 2189 | |
d18240db AX |
2190 | /* Now update the urb's actual_length and give back to |
2191 | * the core | |
82d1009f | 2192 | */ |
d18240db AX |
2193 | if (usb_endpoint_xfer_control(&td->urb->ep->desc)) |
2194 | ret = process_ctrl_td(xhci, td, event_trb, event, ep, | |
2195 | &status); | |
04e51901 AX |
2196 | else if (usb_endpoint_xfer_isoc(&td->urb->ep->desc)) |
2197 | ret = process_isoc_td(xhci, td, event_trb, event, ep, | |
2198 | &status); | |
d18240db AX |
2199 | else |
2200 | ret = process_bulk_intr_td(xhci, td, event_trb, event, | |
2201 | ep, &status); | |
2202 | ||
2203 | cleanup: | |
2204 | /* | |
2205 | * Do not update event ring dequeue pointer if ep->skip is set. | |
2206 | * Will roll back to continue process missed tds. | |
2207 | */ | |
2208 | if (trb_comp_code == COMP_MISSED_INT || !ep->skip) { | |
2209 | inc_deq(xhci, xhci->event_ring, true); | |
d18240db AX |
2210 | } |
2211 | ||
2212 | if (ret) { | |
2213 | urb = td->urb; | |
8e51adcc | 2214 | urb_priv = urb->hcpriv; |
d18240db AX |
2215 | /* Leave the TD around for the reset endpoint function |
2216 | * to use(but only if it's not a control endpoint, | |
2217 | * since we already queued the Set TR dequeue pointer | |
2218 | * command for stalled control endpoints). | |
2219 | */ | |
2220 | if (usb_endpoint_xfer_control(&urb->ep->desc) || | |
2221 | (trb_comp_code != COMP_STALL && | |
2222 | trb_comp_code != COMP_BABBLE)) | |
8e51adcc | 2223 | xhci_urb_free_priv(xhci, urb_priv); |
d18240db | 2224 | |
214f76f7 | 2225 | usb_hcd_unlink_urb_from_ep(bus_to_hcd(urb->dev->bus), urb); |
f444ff27 SS |
2226 | if ((urb->actual_length != urb->transfer_buffer_length && |
2227 | (urb->transfer_flags & | |
2228 | URB_SHORT_NOT_OK)) || | |
fd984d24 SS |
2229 | (status != 0 && |
2230 | !usb_endpoint_xfer_isoc(&urb->ep->desc))) | |
f444ff27 SS |
2231 | xhci_dbg(xhci, "Giveback URB %p, len = %d, " |
2232 | "expected = %x, status = %d\n", | |
2233 | urb, urb->actual_length, | |
2234 | urb->transfer_buffer_length, | |
2235 | status); | |
d18240db | 2236 | spin_unlock(&xhci->lock); |
b3df3f9c SS |
2237 | /* EHCI, UHCI, and OHCI always unconditionally set the |
2238 | * urb->status of an isochronous endpoint to 0. | |
2239 | */ | |
2240 | if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) | |
2241 | status = 0; | |
214f76f7 | 2242 | usb_hcd_giveback_urb(bus_to_hcd(urb->dev->bus), urb, status); |
d18240db AX |
2243 | spin_lock(&xhci->lock); |
2244 | } | |
2245 | ||
2246 | /* | |
2247 | * If ep->skip is set, it means there are missed tds on the | |
2248 | * endpoint ring need to take care of. | |
2249 | * Process them as short transfer until reach the td pointed by | |
2250 | * the event. | |
2251 | */ | |
2252 | } while (ep->skip && trb_comp_code != COMP_MISSED_INT); | |
2253 | ||
d0e96f5a SS |
2254 | return 0; |
2255 | } | |
2256 | ||
0f2a7930 SS |
2257 | /* |
2258 | * This function handles all OS-owned events on the event ring. It may drop | |
2259 | * xhci->lock between event processing (e.g. to pass up port status changes). | |
9dee9a21 ME |
2260 | * Returns >0 for "possibly more events to process" (caller should call again), |
2261 | * otherwise 0 if done. In future, <0 returns should indicate error code. | |
0f2a7930 | 2262 | */ |
9dee9a21 | 2263 | static int xhci_handle_event(struct xhci_hcd *xhci) |
7f84eef0 SS |
2264 | { |
2265 | union xhci_trb *event; | |
0f2a7930 | 2266 | int update_ptrs = 1; |
d0e96f5a | 2267 | int ret; |
7f84eef0 SS |
2268 | |
2269 | if (!xhci->event_ring || !xhci->event_ring->dequeue) { | |
2270 | xhci->error_bitmask |= 1 << 1; | |
9dee9a21 | 2271 | return 0; |
7f84eef0 SS |
2272 | } |
2273 | ||
2274 | event = xhci->event_ring->dequeue; | |
2275 | /* Does the HC or OS own the TRB? */ | |
28ccd296 ME |
2276 | if ((le32_to_cpu(event->event_cmd.flags) & TRB_CYCLE) != |
2277 | xhci->event_ring->cycle_state) { | |
7f84eef0 | 2278 | xhci->error_bitmask |= 1 << 2; |
9dee9a21 | 2279 | return 0; |
7f84eef0 SS |
2280 | } |
2281 | ||
92a3da41 ME |
2282 | /* |
2283 | * Barrier between reading the TRB_CYCLE (valid) flag above and any | |
2284 | * speculative reads of the event's flags/data below. | |
2285 | */ | |
2286 | rmb(); | |
0f2a7930 | 2287 | /* FIXME: Handle more event types. */ |
28ccd296 | 2288 | switch ((le32_to_cpu(event->event_cmd.flags) & TRB_TYPE_BITMASK)) { |
7f84eef0 SS |
2289 | case TRB_TYPE(TRB_COMPLETION): |
2290 | handle_cmd_completion(xhci, &event->event_cmd); | |
2291 | break; | |
0f2a7930 SS |
2292 | case TRB_TYPE(TRB_PORT_STATUS): |
2293 | handle_port_status(xhci, event); | |
2294 | update_ptrs = 0; | |
2295 | break; | |
d0e96f5a SS |
2296 | case TRB_TYPE(TRB_TRANSFER): |
2297 | ret = handle_tx_event(xhci, &event->trans_event); | |
2298 | if (ret < 0) | |
2299 | xhci->error_bitmask |= 1 << 9; | |
2300 | else | |
2301 | update_ptrs = 0; | |
2302 | break; | |
623bef9e SS |
2303 | case TRB_TYPE(TRB_DEV_NOTE): |
2304 | handle_device_notification(xhci, event); | |
2305 | break; | |
7f84eef0 | 2306 | default: |
28ccd296 ME |
2307 | if ((le32_to_cpu(event->event_cmd.flags) & TRB_TYPE_BITMASK) >= |
2308 | TRB_TYPE(48)) | |
0238634d SS |
2309 | handle_vendor_event(xhci, event); |
2310 | else | |
2311 | xhci->error_bitmask |= 1 << 3; | |
7f84eef0 | 2312 | } |
6f5165cf SS |
2313 | /* Any of the above functions may drop and re-acquire the lock, so check |
2314 | * to make sure a watchdog timer didn't mark the host as non-responsive. | |
2315 | */ | |
2316 | if (xhci->xhc_state & XHCI_STATE_DYING) { | |
2317 | xhci_dbg(xhci, "xHCI host dying, returning from " | |
2318 | "event handler.\n"); | |
9dee9a21 | 2319 | return 0; |
6f5165cf | 2320 | } |
7f84eef0 | 2321 | |
c06d68b8 SS |
2322 | if (update_ptrs) |
2323 | /* Update SW event ring dequeue pointer */ | |
0f2a7930 | 2324 | inc_deq(xhci, xhci->event_ring, true); |
c06d68b8 | 2325 | |
9dee9a21 ME |
2326 | /* Are there more items on the event ring? Caller will call us again to |
2327 | * check. | |
2328 | */ | |
2329 | return 1; | |
7f84eef0 | 2330 | } |
9032cd52 SS |
2331 | |
2332 | /* | |
2333 | * xHCI spec says we can get an interrupt, and if the HC has an error condition, | |
2334 | * we might get bad data out of the event ring. Section 4.10.2.7 has a list of | |
2335 | * indicators of an event TRB error, but we check the status *first* to be safe. | |
2336 | */ | |
2337 | irqreturn_t xhci_irq(struct usb_hcd *hcd) | |
2338 | { | |
2339 | struct xhci_hcd *xhci = hcd_to_xhci(hcd); | |
c21599a3 | 2340 | u32 status; |
9032cd52 | 2341 | union xhci_trb *trb; |
bda53145 | 2342 | u64 temp_64; |
c06d68b8 SS |
2343 | union xhci_trb *event_ring_deq; |
2344 | dma_addr_t deq; | |
9032cd52 SS |
2345 | |
2346 | spin_lock(&xhci->lock); | |
2347 | trb = xhci->event_ring->dequeue; | |
2348 | /* Check if the xHC generated the interrupt, or the irq is shared */ | |
27e0dd4d | 2349 | status = xhci_readl(xhci, &xhci->op_regs->status); |
c21599a3 | 2350 | if (status == 0xffffffff) |
9032cd52 SS |
2351 | goto hw_died; |
2352 | ||
c21599a3 | 2353 | if (!(status & STS_EINT)) { |
9032cd52 | 2354 | spin_unlock(&xhci->lock); |
9032cd52 SS |
2355 | return IRQ_NONE; |
2356 | } | |
27e0dd4d | 2357 | if (status & STS_FATAL) { |
9032cd52 SS |
2358 | xhci_warn(xhci, "WARNING: Host System Error\n"); |
2359 | xhci_halt(xhci); | |
2360 | hw_died: | |
9032cd52 SS |
2361 | spin_unlock(&xhci->lock); |
2362 | return -ESHUTDOWN; | |
2363 | } | |
2364 | ||
bda53145 SS |
2365 | /* |
2366 | * Clear the op reg interrupt status first, | |
2367 | * so we can receive interrupts from other MSI-X interrupters. | |
2368 | * Write 1 to clear the interrupt status. | |
2369 | */ | |
27e0dd4d SS |
2370 | status |= STS_EINT; |
2371 | xhci_writel(xhci, status, &xhci->op_regs->status); | |
bda53145 SS |
2372 | /* FIXME when MSI-X is supported and there are multiple vectors */ |
2373 | /* Clear the MSI-X event interrupt status */ | |
2374 | ||
c21599a3 SS |
2375 | if (hcd->irq != -1) { |
2376 | u32 irq_pending; | |
2377 | /* Acknowledge the PCI interrupt */ | |
2378 | irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending); | |
2379 | irq_pending |= 0x3; | |
2380 | xhci_writel(xhci, irq_pending, &xhci->ir_set->irq_pending); | |
2381 | } | |
bda53145 | 2382 | |
c06d68b8 | 2383 | if (xhci->xhc_state & XHCI_STATE_DYING) { |
bda53145 SS |
2384 | xhci_dbg(xhci, "xHCI dying, ignoring interrupt. " |
2385 | "Shouldn't IRQs be disabled?\n"); | |
c06d68b8 SS |
2386 | /* Clear the event handler busy flag (RW1C); |
2387 | * the event ring should be empty. | |
bda53145 | 2388 | */ |
c06d68b8 SS |
2389 | temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue); |
2390 | xhci_write_64(xhci, temp_64 | ERST_EHB, | |
2391 | &xhci->ir_set->erst_dequeue); | |
2392 | spin_unlock(&xhci->lock); | |
2393 | ||
2394 | return IRQ_HANDLED; | |
2395 | } | |
2396 | ||
2397 | event_ring_deq = xhci->event_ring->dequeue; | |
2398 | /* FIXME this should be a delayed service routine | |
2399 | * that clears the EHB. | |
2400 | */ | |
9dee9a21 | 2401 | while (xhci_handle_event(xhci) > 0) {} |
bda53145 | 2402 | |
bda53145 | 2403 | temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue); |
c06d68b8 SS |
2404 | /* If necessary, update the HW's version of the event ring deq ptr. */ |
2405 | if (event_ring_deq != xhci->event_ring->dequeue) { | |
2406 | deq = xhci_trb_virt_to_dma(xhci->event_ring->deq_seg, | |
2407 | xhci->event_ring->dequeue); | |
2408 | if (deq == 0) | |
2409 | xhci_warn(xhci, "WARN something wrong with SW event " | |
2410 | "ring dequeue ptr.\n"); | |
2411 | /* Update HC event ring dequeue pointer */ | |
2412 | temp_64 &= ERST_PTR_MASK; | |
2413 | temp_64 |= ((u64) deq & (u64) ~ERST_PTR_MASK); | |
2414 | } | |
2415 | ||
2416 | /* Clear the event handler busy flag (RW1C); event ring is empty. */ | |
2417 | temp_64 |= ERST_EHB; | |
2418 | xhci_write_64(xhci, temp_64, &xhci->ir_set->erst_dequeue); | |
2419 | ||
9032cd52 SS |
2420 | spin_unlock(&xhci->lock); |
2421 | ||
2422 | return IRQ_HANDLED; | |
2423 | } | |
2424 | ||
2425 | irqreturn_t xhci_msi_irq(int irq, struct usb_hcd *hcd) | |
2426 | { | |
968b822c | 2427 | return xhci_irq(hcd); |
9032cd52 | 2428 | } |
7f84eef0 | 2429 | |
d0e96f5a SS |
2430 | /**** Endpoint Ring Operations ****/ |
2431 | ||
7f84eef0 SS |
2432 | /* |
2433 | * Generic function for queueing a TRB on a ring. | |
2434 | * The caller must have checked to make sure there's room on the ring. | |
6cc30d85 SS |
2435 | * |
2436 | * @more_trbs_coming: Will you enqueue more TRBs before calling | |
2437 | * prepare_transfer()? | |
7f84eef0 SS |
2438 | */ |
2439 | static void queue_trb(struct xhci_hcd *xhci, struct xhci_ring *ring, | |
7e393a83 | 2440 | bool consumer, bool more_trbs_coming, bool isoc, |
7f84eef0 SS |
2441 | u32 field1, u32 field2, u32 field3, u32 field4) |
2442 | { | |
2443 | struct xhci_generic_trb *trb; | |
2444 | ||
2445 | trb = &ring->enqueue->generic; | |
28ccd296 ME |
2446 | trb->field[0] = cpu_to_le32(field1); |
2447 | trb->field[1] = cpu_to_le32(field2); | |
2448 | trb->field[2] = cpu_to_le32(field3); | |
2449 | trb->field[3] = cpu_to_le32(field4); | |
7e393a83 | 2450 | inc_enq(xhci, ring, consumer, more_trbs_coming, isoc); |
7f84eef0 SS |
2451 | } |
2452 | ||
d0e96f5a SS |
2453 | /* |
2454 | * Does various checks on the endpoint ring, and makes it ready to queue num_trbs. | |
2455 | * FIXME allocate segments if the ring is full. | |
2456 | */ | |
2457 | static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring, | |
7e393a83 | 2458 | u32 ep_state, unsigned int num_trbs, bool isoc, gfp_t mem_flags) |
d0e96f5a SS |
2459 | { |
2460 | /* Make sure the endpoint has been added to xHC schedule */ | |
d0e96f5a SS |
2461 | switch (ep_state) { |
2462 | case EP_STATE_DISABLED: | |
2463 | /* | |
2464 | * USB core changed config/interfaces without notifying us, | |
2465 | * or hardware is reporting the wrong state. | |
2466 | */ | |
2467 | xhci_warn(xhci, "WARN urb submitted to disabled ep\n"); | |
2468 | return -ENOENT; | |
d0e96f5a | 2469 | case EP_STATE_ERROR: |
c92bcfa7 | 2470 | xhci_warn(xhci, "WARN waiting for error on ep to be cleared\n"); |
d0e96f5a SS |
2471 | /* FIXME event handling code for error needs to clear it */ |
2472 | /* XXX not sure if this should be -ENOENT or not */ | |
2473 | return -EINVAL; | |
c92bcfa7 SS |
2474 | case EP_STATE_HALTED: |
2475 | xhci_dbg(xhci, "WARN halted endpoint, queueing URB anyway.\n"); | |
d0e96f5a SS |
2476 | case EP_STATE_STOPPED: |
2477 | case EP_STATE_RUNNING: | |
2478 | break; | |
2479 | default: | |
2480 | xhci_err(xhci, "ERROR unknown endpoint state for ep\n"); | |
2481 | /* | |
2482 | * FIXME issue Configure Endpoint command to try to get the HC | |
2483 | * back into a known state. | |
2484 | */ | |
2485 | return -EINVAL; | |
2486 | } | |
2487 | if (!room_on_ring(xhci, ep_ring, num_trbs)) { | |
2488 | /* FIXME allocate more room */ | |
2489 | xhci_err(xhci, "ERROR no room on ep ring\n"); | |
2490 | return -ENOMEM; | |
2491 | } | |
6c12db90 JY |
2492 | |
2493 | if (enqueue_is_link_trb(ep_ring)) { | |
2494 | struct xhci_ring *ring = ep_ring; | |
2495 | union xhci_trb *next; | |
6c12db90 | 2496 | |
6c12db90 JY |
2497 | next = ring->enqueue; |
2498 | ||
2499 | while (last_trb(xhci, ring, ring->enq_seg, next)) { | |
7e393a83 AX |
2500 | /* If we're not dealing with 0.95 hardware or isoc rings |
2501 | * on AMD 0.96 host, clear the chain bit. | |
6c12db90 | 2502 | */ |
7e393a83 AX |
2503 | if (!xhci_link_trb_quirk(xhci) && !(isoc && |
2504 | (xhci->quirks & XHCI_AMD_0x96_HOST))) | |
28ccd296 | 2505 | next->link.control &= cpu_to_le32(~TRB_CHAIN); |
6c12db90 | 2506 | else |
28ccd296 | 2507 | next->link.control |= cpu_to_le32(TRB_CHAIN); |
6c12db90 JY |
2508 | |
2509 | wmb(); | |
f5960b69 | 2510 | next->link.control ^= cpu_to_le32(TRB_CYCLE); |
6c12db90 JY |
2511 | |
2512 | /* Toggle the cycle bit after the last ring segment. */ | |
2513 | if (last_trb_on_last_seg(xhci, ring, ring->enq_seg, next)) { | |
2514 | ring->cycle_state = (ring->cycle_state ? 0 : 1); | |
6c12db90 JY |
2515 | } |
2516 | ring->enq_seg = ring->enq_seg->next; | |
2517 | ring->enqueue = ring->enq_seg->trbs; | |
2518 | next = ring->enqueue; | |
2519 | } | |
2520 | } | |
2521 | ||
d0e96f5a SS |
2522 | return 0; |
2523 | } | |
2524 | ||
23e3be11 | 2525 | static int prepare_transfer(struct xhci_hcd *xhci, |
d0e96f5a SS |
2526 | struct xhci_virt_device *xdev, |
2527 | unsigned int ep_index, | |
e9df17eb | 2528 | unsigned int stream_id, |
d0e96f5a SS |
2529 | unsigned int num_trbs, |
2530 | struct urb *urb, | |
8e51adcc | 2531 | unsigned int td_index, |
7e393a83 | 2532 | bool isoc, |
d0e96f5a SS |
2533 | gfp_t mem_flags) |
2534 | { | |
2535 | int ret; | |
8e51adcc AX |
2536 | struct urb_priv *urb_priv; |
2537 | struct xhci_td *td; | |
e9df17eb | 2538 | struct xhci_ring *ep_ring; |
d115b048 | 2539 | struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index); |
e9df17eb SS |
2540 | |
2541 | ep_ring = xhci_stream_id_to_ring(xdev, ep_index, stream_id); | |
2542 | if (!ep_ring) { | |
2543 | xhci_dbg(xhci, "Can't prepare ring for bad stream ID %u\n", | |
2544 | stream_id); | |
2545 | return -EINVAL; | |
2546 | } | |
2547 | ||
2548 | ret = prepare_ring(xhci, ep_ring, | |
28ccd296 | 2549 | le32_to_cpu(ep_ctx->ep_info) & EP_STATE_MASK, |
7e393a83 | 2550 | num_trbs, isoc, mem_flags); |
d0e96f5a SS |
2551 | if (ret) |
2552 | return ret; | |
d0e96f5a | 2553 | |
8e51adcc AX |
2554 | urb_priv = urb->hcpriv; |
2555 | td = urb_priv->td[td_index]; | |
2556 | ||
2557 | INIT_LIST_HEAD(&td->td_list); | |
2558 | INIT_LIST_HEAD(&td->cancelled_td_list); | |
2559 | ||
2560 | if (td_index == 0) { | |
214f76f7 | 2561 | ret = usb_hcd_link_urb_to_ep(bus_to_hcd(urb->dev->bus), urb); |
d13565c1 | 2562 | if (unlikely(ret)) |
8e51adcc | 2563 | return ret; |
d0e96f5a SS |
2564 | } |
2565 | ||
8e51adcc | 2566 | td->urb = urb; |
d0e96f5a | 2567 | /* Add this TD to the tail of the endpoint ring's TD list */ |
8e51adcc AX |
2568 | list_add_tail(&td->td_list, &ep_ring->td_list); |
2569 | td->start_seg = ep_ring->enq_seg; | |
2570 | td->first_trb = ep_ring->enqueue; | |
2571 | ||
2572 | urb_priv->td[td_index] = td; | |
d0e96f5a SS |
2573 | |
2574 | return 0; | |
2575 | } | |
2576 | ||
23e3be11 | 2577 | static unsigned int count_sg_trbs_needed(struct xhci_hcd *xhci, struct urb *urb) |
8a96c052 SS |
2578 | { |
2579 | int num_sgs, num_trbs, running_total, temp, i; | |
2580 | struct scatterlist *sg; | |
2581 | ||
2582 | sg = NULL; | |
bc677d5b | 2583 | num_sgs = urb->num_mapped_sgs; |
8a96c052 SS |
2584 | temp = urb->transfer_buffer_length; |
2585 | ||
8a96c052 | 2586 | num_trbs = 0; |
910f8d0c | 2587 | for_each_sg(urb->sg, sg, num_sgs, i) { |
8a96c052 SS |
2588 | unsigned int len = sg_dma_len(sg); |
2589 | ||
2590 | /* Scatter gather list entries may cross 64KB boundaries */ | |
2591 | running_total = TRB_MAX_BUFF_SIZE - | |
a2490187 | 2592 | (sg_dma_address(sg) & (TRB_MAX_BUFF_SIZE - 1)); |
5807795b | 2593 | running_total &= TRB_MAX_BUFF_SIZE - 1; |
8a96c052 SS |
2594 | if (running_total != 0) |
2595 | num_trbs++; | |
2596 | ||
2597 | /* How many more 64KB chunks to transfer, how many more TRBs? */ | |
bcd2fde0 | 2598 | while (running_total < sg_dma_len(sg) && running_total < temp) { |
8a96c052 SS |
2599 | num_trbs++; |
2600 | running_total += TRB_MAX_BUFF_SIZE; | |
2601 | } | |
8a96c052 SS |
2602 | len = min_t(int, len, temp); |
2603 | temp -= len; | |
2604 | if (temp == 0) | |
2605 | break; | |
2606 | } | |
8a96c052 SS |
2607 | return num_trbs; |
2608 | } | |
2609 | ||
23e3be11 | 2610 | static void check_trb_math(struct urb *urb, int num_trbs, int running_total) |
8a96c052 SS |
2611 | { |
2612 | if (num_trbs != 0) | |
a2490187 | 2613 | dev_err(&urb->dev->dev, "%s - ep %#x - Miscalculated number of " |
8a96c052 SS |
2614 | "TRBs, %d left\n", __func__, |
2615 | urb->ep->desc.bEndpointAddress, num_trbs); | |
2616 | if (running_total != urb->transfer_buffer_length) | |
a2490187 | 2617 | dev_err(&urb->dev->dev, "%s - ep %#x - Miscalculated tx length, " |
8a96c052 SS |
2618 | "queued %#x (%d), asked for %#x (%d)\n", |
2619 | __func__, | |
2620 | urb->ep->desc.bEndpointAddress, | |
2621 | running_total, running_total, | |
2622 | urb->transfer_buffer_length, | |
2623 | urb->transfer_buffer_length); | |
2624 | } | |
2625 | ||
23e3be11 | 2626 | static void giveback_first_trb(struct xhci_hcd *xhci, int slot_id, |
e9df17eb | 2627 | unsigned int ep_index, unsigned int stream_id, int start_cycle, |
e1eab2e0 | 2628 | struct xhci_generic_trb *start_trb) |
8a96c052 | 2629 | { |
8a96c052 SS |
2630 | /* |
2631 | * Pass all the TRBs to the hardware at once and make sure this write | |
2632 | * isn't reordered. | |
2633 | */ | |
2634 | wmb(); | |
50f7b52a | 2635 | if (start_cycle) |
28ccd296 | 2636 | start_trb->field[3] |= cpu_to_le32(start_cycle); |
50f7b52a | 2637 | else |
28ccd296 | 2638 | start_trb->field[3] &= cpu_to_le32(~TRB_CYCLE); |
be88fe4f | 2639 | xhci_ring_ep_doorbell(xhci, slot_id, ep_index, stream_id); |
8a96c052 SS |
2640 | } |
2641 | ||
624defa1 SS |
2642 | /* |
2643 | * xHCI uses normal TRBs for both bulk and interrupt. When the interrupt | |
2644 | * endpoint is to be serviced, the xHC will consume (at most) one TD. A TD | |
2645 | * (comprised of sg list entries) can take several service intervals to | |
2646 | * transmit. | |
2647 | */ | |
2648 | int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags, | |
2649 | struct urb *urb, int slot_id, unsigned int ep_index) | |
2650 | { | |
2651 | struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci, | |
2652 | xhci->devs[slot_id]->out_ctx, ep_index); | |
2653 | int xhci_interval; | |
2654 | int ep_interval; | |
2655 | ||
28ccd296 | 2656 | xhci_interval = EP_INTERVAL_TO_UFRAMES(le32_to_cpu(ep_ctx->ep_info)); |
624defa1 SS |
2657 | ep_interval = urb->interval; |
2658 | /* Convert to microframes */ | |
2659 | if (urb->dev->speed == USB_SPEED_LOW || | |
2660 | urb->dev->speed == USB_SPEED_FULL) | |
2661 | ep_interval *= 8; | |
2662 | /* FIXME change this to a warning and a suggestion to use the new API | |
2663 | * to set the polling interval (once the API is added). | |
2664 | */ | |
2665 | if (xhci_interval != ep_interval) { | |
7961acd7 | 2666 | if (printk_ratelimit()) |
624defa1 SS |
2667 | dev_dbg(&urb->dev->dev, "Driver uses different interval" |
2668 | " (%d microframe%s) than xHCI " | |
2669 | "(%d microframe%s)\n", | |
2670 | ep_interval, | |
2671 | ep_interval == 1 ? "" : "s", | |
2672 | xhci_interval, | |
2673 | xhci_interval == 1 ? "" : "s"); | |
2674 | urb->interval = xhci_interval; | |
2675 | /* Convert back to frames for LS/FS devices */ | |
2676 | if (urb->dev->speed == USB_SPEED_LOW || | |
2677 | urb->dev->speed == USB_SPEED_FULL) | |
2678 | urb->interval /= 8; | |
2679 | } | |
2680 | return xhci_queue_bulk_tx(xhci, GFP_ATOMIC, urb, slot_id, ep_index); | |
2681 | } | |
2682 | ||
04dd950d SS |
2683 | /* |
2684 | * The TD size is the number of bytes remaining in the TD (including this TRB), | |
2685 | * right shifted by 10. | |
2686 | * It must fit in bits 21:17, so it can't be bigger than 31. | |
2687 | */ | |
2688 | static u32 xhci_td_remainder(unsigned int remainder) | |
2689 | { | |
2690 | u32 max = (1 << (21 - 17 + 1)) - 1; | |
2691 | ||
2692 | if ((remainder >> 10) >= max) | |
2693 | return max << 17; | |
2694 | else | |
2695 | return (remainder >> 10) << 17; | |
2696 | } | |
2697 | ||
4da6e6f2 SS |
2698 | /* |
2699 | * For xHCI 1.0 host controllers, TD size is the number of packets remaining in | |
2700 | * the TD (*not* including this TRB). | |
2701 | * | |
2702 | * Total TD packet count = total_packet_count = | |
2703 | * roundup(TD size in bytes / wMaxPacketSize) | |
2704 | * | |
2705 | * Packets transferred up to and including this TRB = packets_transferred = | |
2706 | * rounddown(total bytes transferred including this TRB / wMaxPacketSize) | |
2707 | * | |
2708 | * TD size = total_packet_count - packets_transferred | |
2709 | * | |
2710 | * It must fit in bits 21:17, so it can't be bigger than 31. | |
2711 | */ | |
2712 | ||
2713 | static u32 xhci_v1_0_td_remainder(int running_total, int trb_buff_len, | |
2714 | unsigned int total_packet_count, struct urb *urb) | |
2715 | { | |
2716 | int packets_transferred; | |
2717 | ||
48df4a6f SS |
2718 | /* One TRB with a zero-length data packet. */ |
2719 | if (running_total == 0 && trb_buff_len == 0) | |
2720 | return 0; | |
2721 | ||
4da6e6f2 SS |
2722 | /* All the TRB queueing functions don't count the current TRB in |
2723 | * running_total. | |
2724 | */ | |
2725 | packets_transferred = (running_total + trb_buff_len) / | |
29cc8897 | 2726 | usb_endpoint_maxp(&urb->ep->desc); |
4da6e6f2 SS |
2727 | |
2728 | return xhci_td_remainder(total_packet_count - packets_transferred); | |
2729 | } | |
2730 | ||
23e3be11 | 2731 | static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, |
8a96c052 SS |
2732 | struct urb *urb, int slot_id, unsigned int ep_index) |
2733 | { | |
2734 | struct xhci_ring *ep_ring; | |
2735 | unsigned int num_trbs; | |
8e51adcc | 2736 | struct urb_priv *urb_priv; |
8a96c052 SS |
2737 | struct xhci_td *td; |
2738 | struct scatterlist *sg; | |
2739 | int num_sgs; | |
2740 | int trb_buff_len, this_sg_len, running_total; | |
4da6e6f2 | 2741 | unsigned int total_packet_count; |
8a96c052 SS |
2742 | bool first_trb; |
2743 | u64 addr; | |
6cc30d85 | 2744 | bool more_trbs_coming; |
8a96c052 SS |
2745 | |
2746 | struct xhci_generic_trb *start_trb; | |
2747 | int start_cycle; | |
2748 | ||
e9df17eb SS |
2749 | ep_ring = xhci_urb_to_transfer_ring(xhci, urb); |
2750 | if (!ep_ring) | |
2751 | return -EINVAL; | |
2752 | ||
8a96c052 | 2753 | num_trbs = count_sg_trbs_needed(xhci, urb); |
bc677d5b | 2754 | num_sgs = urb->num_mapped_sgs; |
4da6e6f2 | 2755 | total_packet_count = roundup(urb->transfer_buffer_length, |
29cc8897 | 2756 | usb_endpoint_maxp(&urb->ep->desc)); |
8a96c052 | 2757 | |
23e3be11 | 2758 | trb_buff_len = prepare_transfer(xhci, xhci->devs[slot_id], |
e9df17eb | 2759 | ep_index, urb->stream_id, |
7e393a83 | 2760 | num_trbs, urb, 0, false, mem_flags); |
8a96c052 SS |
2761 | if (trb_buff_len < 0) |
2762 | return trb_buff_len; | |
8e51adcc AX |
2763 | |
2764 | urb_priv = urb->hcpriv; | |
2765 | td = urb_priv->td[0]; | |
2766 | ||
8a96c052 SS |
2767 | /* |
2768 | * Don't give the first TRB to the hardware (by toggling the cycle bit) | |
2769 | * until we've finished creating all the other TRBs. The ring's cycle | |
2770 | * state may change as we enqueue the other TRBs, so save it too. | |
2771 | */ | |
2772 | start_trb = &ep_ring->enqueue->generic; | |
2773 | start_cycle = ep_ring->cycle_state; | |
2774 | ||
2775 | running_total = 0; | |
2776 | /* | |
2777 | * How much data is in the first TRB? | |
2778 | * | |
2779 | * There are three forces at work for TRB buffer pointers and lengths: | |
2780 | * 1. We don't want to walk off the end of this sg-list entry buffer. | |
2781 | * 2. The transfer length that the driver requested may be smaller than | |
2782 | * the amount of memory allocated for this scatter-gather list. | |
2783 | * 3. TRBs buffers can't cross 64KB boundaries. | |
2784 | */ | |
910f8d0c | 2785 | sg = urb->sg; |
8a96c052 SS |
2786 | addr = (u64) sg_dma_address(sg); |
2787 | this_sg_len = sg_dma_len(sg); | |
a2490187 | 2788 | trb_buff_len = TRB_MAX_BUFF_SIZE - (addr & (TRB_MAX_BUFF_SIZE - 1)); |
8a96c052 SS |
2789 | trb_buff_len = min_t(int, trb_buff_len, this_sg_len); |
2790 | if (trb_buff_len > urb->transfer_buffer_length) | |
2791 | trb_buff_len = urb->transfer_buffer_length; | |
8a96c052 SS |
2792 | |
2793 | first_trb = true; | |
2794 | /* Queue the first TRB, even if it's zero-length */ | |
2795 | do { | |
2796 | u32 field = 0; | |
f9dc68fe | 2797 | u32 length_field = 0; |
04dd950d | 2798 | u32 remainder = 0; |
8a96c052 SS |
2799 | |
2800 | /* Don't change the cycle bit of the first TRB until later */ | |
50f7b52a | 2801 | if (first_trb) { |
8a96c052 | 2802 | first_trb = false; |
50f7b52a AX |
2803 | if (start_cycle == 0) |
2804 | field |= 0x1; | |
2805 | } else | |
8a96c052 SS |
2806 | field |= ep_ring->cycle_state; |
2807 | ||
2808 | /* Chain all the TRBs together; clear the chain bit in the last | |
2809 | * TRB to indicate it's the last TRB in the chain. | |
2810 | */ | |
2811 | if (num_trbs > 1) { | |
2812 | field |= TRB_CHAIN; | |
2813 | } else { | |
2814 | /* FIXME - add check for ZERO_PACKET flag before this */ | |
2815 | td->last_trb = ep_ring->enqueue; | |
2816 | field |= TRB_IOC; | |
2817 | } | |
af8b9e63 SS |
2818 | |
2819 | /* Only set interrupt on short packet for IN endpoints */ | |
2820 | if (usb_urb_dir_in(urb)) | |
2821 | field |= TRB_ISP; | |
2822 | ||
8a96c052 | 2823 | if (TRB_MAX_BUFF_SIZE - |
a2490187 | 2824 | (addr & (TRB_MAX_BUFF_SIZE - 1)) < trb_buff_len) { |
8a96c052 SS |
2825 | xhci_warn(xhci, "WARN: sg dma xfer crosses 64KB boundaries!\n"); |
2826 | xhci_dbg(xhci, "Next boundary at %#x, end dma = %#x\n", | |
2827 | (unsigned int) (addr + TRB_MAX_BUFF_SIZE) & ~(TRB_MAX_BUFF_SIZE - 1), | |
2828 | (unsigned int) addr + trb_buff_len); | |
2829 | } | |
4da6e6f2 SS |
2830 | |
2831 | /* Set the TRB length, TD size, and interrupter fields. */ | |
2832 | if (xhci->hci_version < 0x100) { | |
2833 | remainder = xhci_td_remainder( | |
2834 | urb->transfer_buffer_length - | |
2835 | running_total); | |
2836 | } else { | |
2837 | remainder = xhci_v1_0_td_remainder(running_total, | |
2838 | trb_buff_len, total_packet_count, urb); | |
2839 | } | |
f9dc68fe | 2840 | length_field = TRB_LEN(trb_buff_len) | |
04dd950d | 2841 | remainder | |
f9dc68fe | 2842 | TRB_INTR_TARGET(0); |
4da6e6f2 | 2843 | |
6cc30d85 SS |
2844 | if (num_trbs > 1) |
2845 | more_trbs_coming = true; | |
2846 | else | |
2847 | more_trbs_coming = false; | |
7e393a83 | 2848 | queue_trb(xhci, ep_ring, false, more_trbs_coming, false, |
8e595a5d SS |
2849 | lower_32_bits(addr), |
2850 | upper_32_bits(addr), | |
f9dc68fe | 2851 | length_field, |
af8b9e63 | 2852 | field | TRB_TYPE(TRB_NORMAL)); |
8a96c052 SS |
2853 | --num_trbs; |
2854 | running_total += trb_buff_len; | |
2855 | ||
2856 | /* Calculate length for next transfer -- | |
2857 | * Are we done queueing all the TRBs for this sg entry? | |
2858 | */ | |
2859 | this_sg_len -= trb_buff_len; | |
2860 | if (this_sg_len == 0) { | |
2861 | --num_sgs; | |
2862 | if (num_sgs == 0) | |
2863 | break; | |
2864 | sg = sg_next(sg); | |
2865 | addr = (u64) sg_dma_address(sg); | |
2866 | this_sg_len = sg_dma_len(sg); | |
2867 | } else { | |
2868 | addr += trb_buff_len; | |
2869 | } | |
2870 | ||
2871 | trb_buff_len = TRB_MAX_BUFF_SIZE - | |
a2490187 | 2872 | (addr & (TRB_MAX_BUFF_SIZE - 1)); |
8a96c052 SS |
2873 | trb_buff_len = min_t(int, trb_buff_len, this_sg_len); |
2874 | if (running_total + trb_buff_len > urb->transfer_buffer_length) | |
2875 | trb_buff_len = | |
2876 | urb->transfer_buffer_length - running_total; | |
2877 | } while (running_total < urb->transfer_buffer_length); | |
2878 | ||
2879 | check_trb_math(urb, num_trbs, running_total); | |
e9df17eb | 2880 | giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id, |
e1eab2e0 | 2881 | start_cycle, start_trb); |
8a96c052 SS |
2882 | return 0; |
2883 | } | |
2884 | ||
b10de142 | 2885 | /* This is very similar to what ehci-q.c qtd_fill() does */ |
23e3be11 | 2886 | int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, |
b10de142 SS |
2887 | struct urb *urb, int slot_id, unsigned int ep_index) |
2888 | { | |
2889 | struct xhci_ring *ep_ring; | |
8e51adcc | 2890 | struct urb_priv *urb_priv; |
b10de142 SS |
2891 | struct xhci_td *td; |
2892 | int num_trbs; | |
2893 | struct xhci_generic_trb *start_trb; | |
2894 | bool first_trb; | |
6cc30d85 | 2895 | bool more_trbs_coming; |
b10de142 | 2896 | int start_cycle; |
f9dc68fe | 2897 | u32 field, length_field; |
b10de142 SS |
2898 | |
2899 | int running_total, trb_buff_len, ret; | |
4da6e6f2 | 2900 | unsigned int total_packet_count; |
b10de142 SS |
2901 | u64 addr; |
2902 | ||
ff9c895f | 2903 | if (urb->num_sgs) |
8a96c052 SS |
2904 | return queue_bulk_sg_tx(xhci, mem_flags, urb, slot_id, ep_index); |
2905 | ||
e9df17eb SS |
2906 | ep_ring = xhci_urb_to_transfer_ring(xhci, urb); |
2907 | if (!ep_ring) | |
2908 | return -EINVAL; | |
b10de142 SS |
2909 | |
2910 | num_trbs = 0; | |
2911 | /* How much data is (potentially) left before the 64KB boundary? */ | |
2912 | running_total = TRB_MAX_BUFF_SIZE - | |
a2490187 | 2913 | (urb->transfer_dma & (TRB_MAX_BUFF_SIZE - 1)); |
5807795b | 2914 | running_total &= TRB_MAX_BUFF_SIZE - 1; |
b10de142 SS |
2915 | |
2916 | /* If there's some data on this 64KB chunk, or we have to send a | |
2917 | * zero-length transfer, we need at least one TRB | |
2918 | */ | |
2919 | if (running_total != 0 || urb->transfer_buffer_length == 0) | |
2920 | num_trbs++; | |
2921 | /* How many more 64KB chunks to transfer, how many more TRBs? */ | |
2922 | while (running_total < urb->transfer_buffer_length) { | |
2923 | num_trbs++; | |
2924 | running_total += TRB_MAX_BUFF_SIZE; | |
2925 | } | |
2926 | /* FIXME: this doesn't deal with URB_ZERO_PACKET - need one more */ | |
2927 | ||
e9df17eb SS |
2928 | ret = prepare_transfer(xhci, xhci->devs[slot_id], |
2929 | ep_index, urb->stream_id, | |
7e393a83 | 2930 | num_trbs, urb, 0, false, mem_flags); |
b10de142 SS |
2931 | if (ret < 0) |
2932 | return ret; | |
2933 | ||
8e51adcc AX |
2934 | urb_priv = urb->hcpriv; |
2935 | td = urb_priv->td[0]; | |
2936 | ||
b10de142 SS |
2937 | /* |
2938 | * Don't give the first TRB to the hardware (by toggling the cycle bit) | |
2939 | * until we've finished creating all the other TRBs. The ring's cycle | |
2940 | * state may change as we enqueue the other TRBs, so save it too. | |
2941 | */ | |
2942 | start_trb = &ep_ring->enqueue->generic; | |
2943 | start_cycle = ep_ring->cycle_state; | |
2944 | ||
2945 | running_total = 0; | |
4da6e6f2 | 2946 | total_packet_count = roundup(urb->transfer_buffer_length, |
29cc8897 | 2947 | usb_endpoint_maxp(&urb->ep->desc)); |
b10de142 SS |
2948 | /* How much data is in the first TRB? */ |
2949 | addr = (u64) urb->transfer_dma; | |
2950 | trb_buff_len = TRB_MAX_BUFF_SIZE - | |
a2490187 PZ |
2951 | (urb->transfer_dma & (TRB_MAX_BUFF_SIZE - 1)); |
2952 | if (trb_buff_len > urb->transfer_buffer_length) | |
b10de142 SS |
2953 | trb_buff_len = urb->transfer_buffer_length; |
2954 | ||
2955 | first_trb = true; | |
2956 | ||
2957 | /* Queue the first TRB, even if it's zero-length */ | |
2958 | do { | |
04dd950d | 2959 | u32 remainder = 0; |
b10de142 SS |
2960 | field = 0; |
2961 | ||
2962 | /* Don't change the cycle bit of the first TRB until later */ | |
50f7b52a | 2963 | if (first_trb) { |
b10de142 | 2964 | first_trb = false; |
50f7b52a AX |
2965 | if (start_cycle == 0) |
2966 | field |= 0x1; | |
2967 | } else | |
b10de142 SS |
2968 | field |= ep_ring->cycle_state; |
2969 | ||
2970 | /* Chain all the TRBs together; clear the chain bit in the last | |
2971 | * TRB to indicate it's the last TRB in the chain. | |
2972 | */ | |
2973 | if (num_trbs > 1) { | |
2974 | field |= TRB_CHAIN; | |
2975 | } else { | |
2976 | /* FIXME - add check for ZERO_PACKET flag before this */ | |
2977 | td->last_trb = ep_ring->enqueue; | |
2978 | field |= TRB_IOC; | |
2979 | } | |
af8b9e63 SS |
2980 | |
2981 | /* Only set interrupt on short packet for IN endpoints */ | |
2982 | if (usb_urb_dir_in(urb)) | |
2983 | field |= TRB_ISP; | |
2984 | ||
4da6e6f2 SS |
2985 | /* Set the TRB length, TD size, and interrupter fields. */ |
2986 | if (xhci->hci_version < 0x100) { | |
2987 | remainder = xhci_td_remainder( | |
2988 | urb->transfer_buffer_length - | |
2989 | running_total); | |
2990 | } else { | |
2991 | remainder = xhci_v1_0_td_remainder(running_total, | |
2992 | trb_buff_len, total_packet_count, urb); | |
2993 | } | |
f9dc68fe | 2994 | length_field = TRB_LEN(trb_buff_len) | |
04dd950d | 2995 | remainder | |
f9dc68fe | 2996 | TRB_INTR_TARGET(0); |
4da6e6f2 | 2997 | |
6cc30d85 SS |
2998 | if (num_trbs > 1) |
2999 | more_trbs_coming = true; | |
3000 | else | |
3001 | more_trbs_coming = false; | |
7e393a83 | 3002 | queue_trb(xhci, ep_ring, false, more_trbs_coming, false, |
8e595a5d SS |
3003 | lower_32_bits(addr), |
3004 | upper_32_bits(addr), | |
f9dc68fe | 3005 | length_field, |
af8b9e63 | 3006 | field | TRB_TYPE(TRB_NORMAL)); |
b10de142 SS |
3007 | --num_trbs; |
3008 | running_total += trb_buff_len; | |
3009 | ||
3010 | /* Calculate length for next transfer */ | |
3011 | addr += trb_buff_len; | |
3012 | trb_buff_len = urb->transfer_buffer_length - running_total; | |
3013 | if (trb_buff_len > TRB_MAX_BUFF_SIZE) | |
3014 | trb_buff_len = TRB_MAX_BUFF_SIZE; | |
3015 | } while (running_total < urb->transfer_buffer_length); | |
3016 | ||
8a96c052 | 3017 | check_trb_math(urb, num_trbs, running_total); |
e9df17eb | 3018 | giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id, |
e1eab2e0 | 3019 | start_cycle, start_trb); |
b10de142 SS |
3020 | return 0; |
3021 | } | |
3022 | ||
d0e96f5a | 3023 | /* Caller must have locked xhci->lock */ |
23e3be11 | 3024 | int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, |
d0e96f5a SS |
3025 | struct urb *urb, int slot_id, unsigned int ep_index) |
3026 | { | |
3027 | struct xhci_ring *ep_ring; | |
3028 | int num_trbs; | |
3029 | int ret; | |
3030 | struct usb_ctrlrequest *setup; | |
3031 | struct xhci_generic_trb *start_trb; | |
3032 | int start_cycle; | |
f9dc68fe | 3033 | u32 field, length_field; |
8e51adcc | 3034 | struct urb_priv *urb_priv; |
d0e96f5a SS |
3035 | struct xhci_td *td; |
3036 | ||
e9df17eb SS |
3037 | ep_ring = xhci_urb_to_transfer_ring(xhci, urb); |
3038 | if (!ep_ring) | |
3039 | return -EINVAL; | |
d0e96f5a SS |
3040 | |
3041 | /* | |
3042 | * Need to copy setup packet into setup TRB, so we can't use the setup | |
3043 | * DMA address. | |
3044 | */ | |
3045 | if (!urb->setup_packet) | |
3046 | return -EINVAL; | |
3047 | ||
d0e96f5a SS |
3048 | /* 1 TRB for setup, 1 for status */ |
3049 | num_trbs = 2; | |
3050 | /* | |
3051 | * Don't need to check if we need additional event data and normal TRBs, | |
3052 | * since data in control transfers will never get bigger than 16MB | |
3053 | * XXX: can we get a buffer that crosses 64KB boundaries? | |
3054 | */ | |
3055 | if (urb->transfer_buffer_length > 0) | |
3056 | num_trbs++; | |
e9df17eb SS |
3057 | ret = prepare_transfer(xhci, xhci->devs[slot_id], |
3058 | ep_index, urb->stream_id, | |
7e393a83 | 3059 | num_trbs, urb, 0, false, mem_flags); |
d0e96f5a SS |
3060 | if (ret < 0) |
3061 | return ret; | |
3062 | ||
8e51adcc AX |
3063 | urb_priv = urb->hcpriv; |
3064 | td = urb_priv->td[0]; | |
3065 | ||
d0e96f5a SS |
3066 | /* |
3067 | * Don't give the first TRB to the hardware (by toggling the cycle bit) | |
3068 | * until we've finished creating all the other TRBs. The ring's cycle | |
3069 | * state may change as we enqueue the other TRBs, so save it too. | |
3070 | */ | |
3071 | start_trb = &ep_ring->enqueue->generic; | |
3072 | start_cycle = ep_ring->cycle_state; | |
3073 | ||
3074 | /* Queue setup TRB - see section 6.4.1.2.1 */ | |
3075 | /* FIXME better way to translate setup_packet into two u32 fields? */ | |
3076 | setup = (struct usb_ctrlrequest *) urb->setup_packet; | |
50f7b52a AX |
3077 | field = 0; |
3078 | field |= TRB_IDT | TRB_TYPE(TRB_SETUP); | |
3079 | if (start_cycle == 0) | |
3080 | field |= 0x1; | |
b83cdc8f AX |
3081 | |
3082 | /* xHCI 1.0 6.4.1.2.1: Transfer Type field */ | |
3083 | if (xhci->hci_version == 0x100) { | |
3084 | if (urb->transfer_buffer_length > 0) { | |
3085 | if (setup->bRequestType & USB_DIR_IN) | |
3086 | field |= TRB_TX_TYPE(TRB_DATA_IN); | |
3087 | else | |
3088 | field |= TRB_TX_TYPE(TRB_DATA_OUT); | |
3089 | } | |
3090 | } | |
3091 | ||
7e393a83 | 3092 | queue_trb(xhci, ep_ring, false, true, false, |
28ccd296 ME |
3093 | setup->bRequestType | setup->bRequest << 8 | le16_to_cpu(setup->wValue) << 16, |
3094 | le16_to_cpu(setup->wIndex) | le16_to_cpu(setup->wLength) << 16, | |
3095 | TRB_LEN(8) | TRB_INTR_TARGET(0), | |
3096 | /* Immediate data in pointer */ | |
3097 | field); | |
d0e96f5a SS |
3098 | |
3099 | /* If there's data, queue data TRBs */ | |
af8b9e63 SS |
3100 | /* Only set interrupt on short packet for IN endpoints */ |
3101 | if (usb_urb_dir_in(urb)) | |
3102 | field = TRB_ISP | TRB_TYPE(TRB_DATA); | |
3103 | else | |
3104 | field = TRB_TYPE(TRB_DATA); | |
3105 | ||
f9dc68fe | 3106 | length_field = TRB_LEN(urb->transfer_buffer_length) | |
04dd950d | 3107 | xhci_td_remainder(urb->transfer_buffer_length) | |
f9dc68fe | 3108 | TRB_INTR_TARGET(0); |
d0e96f5a SS |
3109 | if (urb->transfer_buffer_length > 0) { |
3110 | if (setup->bRequestType & USB_DIR_IN) | |
3111 | field |= TRB_DIR_IN; | |
7e393a83 | 3112 | queue_trb(xhci, ep_ring, false, true, false, |
d0e96f5a SS |
3113 | lower_32_bits(urb->transfer_dma), |
3114 | upper_32_bits(urb->transfer_dma), | |
f9dc68fe | 3115 | length_field, |
af8b9e63 | 3116 | field | ep_ring->cycle_state); |
d0e96f5a SS |
3117 | } |
3118 | ||
3119 | /* Save the DMA address of the last TRB in the TD */ | |
3120 | td->last_trb = ep_ring->enqueue; | |
3121 | ||
3122 | /* Queue status TRB - see Table 7 and sections 4.11.2.2 and 6.4.1.2.3 */ | |
3123 | /* If the device sent data, the status stage is an OUT transfer */ | |
3124 | if (urb->transfer_buffer_length > 0 && setup->bRequestType & USB_DIR_IN) | |
3125 | field = 0; | |
3126 | else | |
3127 | field = TRB_DIR_IN; | |
7e393a83 | 3128 | queue_trb(xhci, ep_ring, false, false, false, |
d0e96f5a SS |
3129 | 0, |
3130 | 0, | |
3131 | TRB_INTR_TARGET(0), | |
3132 | /* Event on completion */ | |
3133 | field | TRB_IOC | TRB_TYPE(TRB_STATUS) | ep_ring->cycle_state); | |
3134 | ||
e9df17eb | 3135 | giveback_first_trb(xhci, slot_id, ep_index, 0, |
e1eab2e0 | 3136 | start_cycle, start_trb); |
d0e96f5a SS |
3137 | return 0; |
3138 | } | |
3139 | ||
04e51901 AX |
3140 | static int count_isoc_trbs_needed(struct xhci_hcd *xhci, |
3141 | struct urb *urb, int i) | |
3142 | { | |
3143 | int num_trbs = 0; | |
48df4a6f | 3144 | u64 addr, td_len; |
04e51901 AX |
3145 | |
3146 | addr = (u64) (urb->transfer_dma + urb->iso_frame_desc[i].offset); | |
3147 | td_len = urb->iso_frame_desc[i].length; | |
3148 | ||
48df4a6f SS |
3149 | num_trbs = DIV_ROUND_UP(td_len + (addr & (TRB_MAX_BUFF_SIZE - 1)), |
3150 | TRB_MAX_BUFF_SIZE); | |
3151 | if (num_trbs == 0) | |
04e51901 | 3152 | num_trbs++; |
04e51901 AX |
3153 | |
3154 | return num_trbs; | |
3155 | } | |
3156 | ||
5cd43e33 SS |
3157 | /* |
3158 | * The transfer burst count field of the isochronous TRB defines the number of | |
3159 | * bursts that are required to move all packets in this TD. Only SuperSpeed | |
3160 | * devices can burst up to bMaxBurst number of packets per service interval. | |
3161 | * This field is zero based, meaning a value of zero in the field means one | |
3162 | * burst. Basically, for everything but SuperSpeed devices, this field will be | |
3163 | * zero. Only xHCI 1.0 host controllers support this field. | |
3164 | */ | |
3165 | static unsigned int xhci_get_burst_count(struct xhci_hcd *xhci, | |
3166 | struct usb_device *udev, | |
3167 | struct urb *urb, unsigned int total_packet_count) | |
3168 | { | |
3169 | unsigned int max_burst; | |
3170 | ||
3171 | if (xhci->hci_version < 0x100 || udev->speed != USB_SPEED_SUPER) | |
3172 | return 0; | |
3173 | ||
3174 | max_burst = urb->ep->ss_ep_comp.bMaxBurst; | |
3175 | return roundup(total_packet_count, max_burst + 1) - 1; | |
3176 | } | |
3177 | ||
b61d378f SS |
3178 | /* |
3179 | * Returns the number of packets in the last "burst" of packets. This field is | |
3180 | * valid for all speeds of devices. USB 2.0 devices can only do one "burst", so | |
3181 | * the last burst packet count is equal to the total number of packets in the | |
3182 | * TD. SuperSpeed endpoints can have up to 3 bursts. All but the last burst | |
3183 | * must contain (bMaxBurst + 1) number of packets, but the last burst can | |
3184 | * contain 1 to (bMaxBurst + 1) packets. | |
3185 | */ | |
3186 | static unsigned int xhci_get_last_burst_packet_count(struct xhci_hcd *xhci, | |
3187 | struct usb_device *udev, | |
3188 | struct urb *urb, unsigned int total_packet_count) | |
3189 | { | |
3190 | unsigned int max_burst; | |
3191 | unsigned int residue; | |
3192 | ||
3193 | if (xhci->hci_version < 0x100) | |
3194 | return 0; | |
3195 | ||
3196 | switch (udev->speed) { | |
3197 | case USB_SPEED_SUPER: | |
3198 | /* bMaxBurst is zero based: 0 means 1 packet per burst */ | |
3199 | max_burst = urb->ep->ss_ep_comp.bMaxBurst; | |
3200 | residue = total_packet_count % (max_burst + 1); | |
3201 | /* If residue is zero, the last burst contains (max_burst + 1) | |
3202 | * number of packets, but the TLBPC field is zero-based. | |
3203 | */ | |
3204 | if (residue == 0) | |
3205 | return max_burst; | |
3206 | return residue - 1; | |
3207 | default: | |
3208 | if (total_packet_count == 0) | |
3209 | return 0; | |
3210 | return total_packet_count - 1; | |
3211 | } | |
3212 | } | |
3213 | ||
04e51901 AX |
3214 | /* This is for isoc transfer */ |
3215 | static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, | |
3216 | struct urb *urb, int slot_id, unsigned int ep_index) | |
3217 | { | |
3218 | struct xhci_ring *ep_ring; | |
3219 | struct urb_priv *urb_priv; | |
3220 | struct xhci_td *td; | |
3221 | int num_tds, trbs_per_td; | |
3222 | struct xhci_generic_trb *start_trb; | |
3223 | bool first_trb; | |
3224 | int start_cycle; | |
3225 | u32 field, length_field; | |
3226 | int running_total, trb_buff_len, td_len, td_remain_len, ret; | |
3227 | u64 start_addr, addr; | |
3228 | int i, j; | |
47cbf692 | 3229 | bool more_trbs_coming; |
04e51901 AX |
3230 | |
3231 | ep_ring = xhci->devs[slot_id]->eps[ep_index].ring; | |
3232 | ||
3233 | num_tds = urb->number_of_packets; | |
3234 | if (num_tds < 1) { | |
3235 | xhci_dbg(xhci, "Isoc URB with zero packets?\n"); | |
3236 | return -EINVAL; | |
3237 | } | |
3238 | ||
04e51901 AX |
3239 | start_addr = (u64) urb->transfer_dma; |
3240 | start_trb = &ep_ring->enqueue->generic; | |
3241 | start_cycle = ep_ring->cycle_state; | |
3242 | ||
522989a2 | 3243 | urb_priv = urb->hcpriv; |
04e51901 AX |
3244 | /* Queue the first TRB, even if it's zero-length */ |
3245 | for (i = 0; i < num_tds; i++) { | |
4da6e6f2 | 3246 | unsigned int total_packet_count; |
5cd43e33 | 3247 | unsigned int burst_count; |
b61d378f | 3248 | unsigned int residue; |
04e51901 | 3249 | |
4da6e6f2 | 3250 | first_trb = true; |
04e51901 AX |
3251 | running_total = 0; |
3252 | addr = start_addr + urb->iso_frame_desc[i].offset; | |
3253 | td_len = urb->iso_frame_desc[i].length; | |
3254 | td_remain_len = td_len; | |
4da6e6f2 | 3255 | total_packet_count = roundup(td_len, |
29cc8897 | 3256 | usb_endpoint_maxp(&urb->ep->desc)); |
48df4a6f SS |
3257 | /* A zero-length transfer still involves at least one packet. */ |
3258 | if (total_packet_count == 0) | |
3259 | total_packet_count++; | |
5cd43e33 SS |
3260 | burst_count = xhci_get_burst_count(xhci, urb->dev, urb, |
3261 | total_packet_count); | |
b61d378f SS |
3262 | residue = xhci_get_last_burst_packet_count(xhci, |
3263 | urb->dev, urb, total_packet_count); | |
04e51901 AX |
3264 | |
3265 | trbs_per_td = count_isoc_trbs_needed(xhci, urb, i); | |
3266 | ||
3267 | ret = prepare_transfer(xhci, xhci->devs[slot_id], ep_index, | |
7e393a83 AX |
3268 | urb->stream_id, trbs_per_td, urb, i, true, |
3269 | mem_flags); | |
522989a2 SS |
3270 | if (ret < 0) { |
3271 | if (i == 0) | |
3272 | return ret; | |
3273 | goto cleanup; | |
3274 | } | |
04e51901 | 3275 | |
04e51901 | 3276 | td = urb_priv->td[i]; |
04e51901 AX |
3277 | for (j = 0; j < trbs_per_td; j++) { |
3278 | u32 remainder = 0; | |
b61d378f | 3279 | field = TRB_TBC(burst_count) | TRB_TLBPC(residue); |
04e51901 AX |
3280 | |
3281 | if (first_trb) { | |
3282 | /* Queue the isoc TRB */ | |
3283 | field |= TRB_TYPE(TRB_ISOC); | |
3284 | /* Assume URB_ISO_ASAP is set */ | |
3285 | field |= TRB_SIA; | |
50f7b52a AX |
3286 | if (i == 0) { |
3287 | if (start_cycle == 0) | |
3288 | field |= 0x1; | |
3289 | } else | |
04e51901 AX |
3290 | field |= ep_ring->cycle_state; |
3291 | first_trb = false; | |
3292 | } else { | |
3293 | /* Queue other normal TRBs */ | |
3294 | field |= TRB_TYPE(TRB_NORMAL); | |
3295 | field |= ep_ring->cycle_state; | |
3296 | } | |
3297 | ||
af8b9e63 SS |
3298 | /* Only set interrupt on short packet for IN EPs */ |
3299 | if (usb_urb_dir_in(urb)) | |
3300 | field |= TRB_ISP; | |
3301 | ||
04e51901 AX |
3302 | /* Chain all the TRBs together; clear the chain bit in |
3303 | * the last TRB to indicate it's the last TRB in the | |
3304 | * chain. | |
3305 | */ | |
3306 | if (j < trbs_per_td - 1) { | |
3307 | field |= TRB_CHAIN; | |
47cbf692 | 3308 | more_trbs_coming = true; |
04e51901 AX |
3309 | } else { |
3310 | td->last_trb = ep_ring->enqueue; | |
3311 | field |= TRB_IOC; | |
ad106f29 AX |
3312 | if (xhci->hci_version == 0x100) { |
3313 | /* Set BEI bit except for the last td */ | |
3314 | if (i < num_tds - 1) | |
3315 | field |= TRB_BEI; | |
3316 | } | |
47cbf692 | 3317 | more_trbs_coming = false; |
04e51901 AX |
3318 | } |
3319 | ||
3320 | /* Calculate TRB length */ | |
3321 | trb_buff_len = TRB_MAX_BUFF_SIZE - | |
3322 | (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1)); | |
3323 | if (trb_buff_len > td_remain_len) | |
3324 | trb_buff_len = td_remain_len; | |
3325 | ||
4da6e6f2 SS |
3326 | /* Set the TRB length, TD size, & interrupter fields. */ |
3327 | if (xhci->hci_version < 0x100) { | |
3328 | remainder = xhci_td_remainder( | |
3329 | td_len - running_total); | |
3330 | } else { | |
3331 | remainder = xhci_v1_0_td_remainder( | |
3332 | running_total, trb_buff_len, | |
3333 | total_packet_count, urb); | |
3334 | } | |
04e51901 AX |
3335 | length_field = TRB_LEN(trb_buff_len) | |
3336 | remainder | | |
3337 | TRB_INTR_TARGET(0); | |
4da6e6f2 | 3338 | |
7e393a83 | 3339 | queue_trb(xhci, ep_ring, false, more_trbs_coming, true, |
04e51901 AX |
3340 | lower_32_bits(addr), |
3341 | upper_32_bits(addr), | |
3342 | length_field, | |
af8b9e63 | 3343 | field); |
04e51901 AX |
3344 | running_total += trb_buff_len; |
3345 | ||
3346 | addr += trb_buff_len; | |
3347 | td_remain_len -= trb_buff_len; | |
3348 | } | |
3349 | ||
3350 | /* Check TD length */ | |
3351 | if (running_total != td_len) { | |
3352 | xhci_err(xhci, "ISOC TD length unmatch\n"); | |
cf840551 AX |
3353 | ret = -EINVAL; |
3354 | goto cleanup; | |
04e51901 AX |
3355 | } |
3356 | } | |
3357 | ||
c41136b0 AX |
3358 | if (xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs == 0) { |
3359 | if (xhci->quirks & XHCI_AMD_PLL_FIX) | |
3360 | usb_amd_quirk_pll_disable(); | |
3361 | } | |
3362 | xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs++; | |
3363 | ||
e1eab2e0 AX |
3364 | giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id, |
3365 | start_cycle, start_trb); | |
04e51901 | 3366 | return 0; |
522989a2 SS |
3367 | cleanup: |
3368 | /* Clean up a partially enqueued isoc transfer. */ | |
3369 | ||
3370 | for (i--; i >= 0; i--) | |
585df1d9 | 3371 | list_del_init(&urb_priv->td[i]->td_list); |
522989a2 SS |
3372 | |
3373 | /* Use the first TD as a temporary variable to turn the TDs we've queued | |
3374 | * into No-ops with a software-owned cycle bit. That way the hardware | |
3375 | * won't accidentally start executing bogus TDs when we partially | |
3376 | * overwrite them. td->first_trb and td->start_seg are already set. | |
3377 | */ | |
3378 | urb_priv->td[0]->last_trb = ep_ring->enqueue; | |
3379 | /* Every TRB except the first & last will have its cycle bit flipped. */ | |
3380 | td_to_noop(xhci, ep_ring, urb_priv->td[0], true); | |
3381 | ||
3382 | /* Reset the ring enqueue back to the first TRB and its cycle bit. */ | |
3383 | ep_ring->enqueue = urb_priv->td[0]->first_trb; | |
3384 | ep_ring->enq_seg = urb_priv->td[0]->start_seg; | |
3385 | ep_ring->cycle_state = start_cycle; | |
3386 | usb_hcd_unlink_urb_from_ep(bus_to_hcd(urb->dev->bus), urb); | |
3387 | return ret; | |
04e51901 AX |
3388 | } |
3389 | ||
3390 | /* | |
3391 | * Check transfer ring to guarantee there is enough room for the urb. | |
3392 | * Update ISO URB start_frame and interval. | |
3393 | * Update interval as xhci_queue_intr_tx does. Just use xhci frame_index to | |
3394 | * update the urb->start_frame by now. | |
3395 | * Always assume URB_ISO_ASAP set, and NEVER use urb->start_frame as input. | |
3396 | */ | |
3397 | int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags, | |
3398 | struct urb *urb, int slot_id, unsigned int ep_index) | |
3399 | { | |
3400 | struct xhci_virt_device *xdev; | |
3401 | struct xhci_ring *ep_ring; | |
3402 | struct xhci_ep_ctx *ep_ctx; | |
3403 | int start_frame; | |
3404 | int xhci_interval; | |
3405 | int ep_interval; | |
3406 | int num_tds, num_trbs, i; | |
3407 | int ret; | |
3408 | ||
3409 | xdev = xhci->devs[slot_id]; | |
3410 | ep_ring = xdev->eps[ep_index].ring; | |
3411 | ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index); | |
3412 | ||
3413 | num_trbs = 0; | |
3414 | num_tds = urb->number_of_packets; | |
3415 | for (i = 0; i < num_tds; i++) | |
3416 | num_trbs += count_isoc_trbs_needed(xhci, urb, i); | |
3417 | ||
3418 | /* Check the ring to guarantee there is enough room for the whole urb. | |
3419 | * Do not insert any td of the urb to the ring if the check failed. | |
3420 | */ | |
28ccd296 | 3421 | ret = prepare_ring(xhci, ep_ring, le32_to_cpu(ep_ctx->ep_info) & EP_STATE_MASK, |
7e393a83 | 3422 | num_trbs, true, mem_flags); |
04e51901 AX |
3423 | if (ret) |
3424 | return ret; | |
3425 | ||
3426 | start_frame = xhci_readl(xhci, &xhci->run_regs->microframe_index); | |
3427 | start_frame &= 0x3fff; | |
3428 | ||
3429 | urb->start_frame = start_frame; | |
3430 | if (urb->dev->speed == USB_SPEED_LOW || | |
3431 | urb->dev->speed == USB_SPEED_FULL) | |
3432 | urb->start_frame >>= 3; | |
3433 | ||
28ccd296 | 3434 | xhci_interval = EP_INTERVAL_TO_UFRAMES(le32_to_cpu(ep_ctx->ep_info)); |
04e51901 AX |
3435 | ep_interval = urb->interval; |
3436 | /* Convert to microframes */ | |
3437 | if (urb->dev->speed == USB_SPEED_LOW || | |
3438 | urb->dev->speed == USB_SPEED_FULL) | |
3439 | ep_interval *= 8; | |
3440 | /* FIXME change this to a warning and a suggestion to use the new API | |
3441 | * to set the polling interval (once the API is added). | |
3442 | */ | |
3443 | if (xhci_interval != ep_interval) { | |
7961acd7 | 3444 | if (printk_ratelimit()) |
04e51901 AX |
3445 | dev_dbg(&urb->dev->dev, "Driver uses different interval" |
3446 | " (%d microframe%s) than xHCI " | |
3447 | "(%d microframe%s)\n", | |
3448 | ep_interval, | |
3449 | ep_interval == 1 ? "" : "s", | |
3450 | xhci_interval, | |
3451 | xhci_interval == 1 ? "" : "s"); | |
3452 | urb->interval = xhci_interval; | |
3453 | /* Convert back to frames for LS/FS devices */ | |
3454 | if (urb->dev->speed == USB_SPEED_LOW || | |
3455 | urb->dev->speed == USB_SPEED_FULL) | |
3456 | urb->interval /= 8; | |
3457 | } | |
3458 | return xhci_queue_isoc_tx(xhci, GFP_ATOMIC, urb, slot_id, ep_index); | |
3459 | } | |
3460 | ||
d0e96f5a SS |
3461 | /**** Command Ring Operations ****/ |
3462 | ||
913a8a34 SS |
3463 | /* Generic function for queueing a command TRB on the command ring. |
3464 | * Check to make sure there's room on the command ring for one command TRB. | |
3465 | * Also check that there's room reserved for commands that must not fail. | |
3466 | * If this is a command that must not fail, meaning command_must_succeed = TRUE, | |
3467 | * then only check for the number of reserved spots. | |
3468 | * Don't decrement xhci->cmd_ring_reserved_trbs after we've queued the TRB | |
3469 | * because the command event handler may want to resubmit a failed command. | |
3470 | */ | |
3471 | static int queue_command(struct xhci_hcd *xhci, u32 field1, u32 field2, | |
3472 | u32 field3, u32 field4, bool command_must_succeed) | |
7f84eef0 | 3473 | { |
913a8a34 | 3474 | int reserved_trbs = xhci->cmd_ring_reserved_trbs; |
d1dc908a SS |
3475 | int ret; |
3476 | ||
913a8a34 SS |
3477 | if (!command_must_succeed) |
3478 | reserved_trbs++; | |
3479 | ||
d1dc908a | 3480 | ret = prepare_ring(xhci, xhci->cmd_ring, EP_STATE_RUNNING, |
7e393a83 | 3481 | reserved_trbs, false, GFP_ATOMIC); |
d1dc908a SS |
3482 | if (ret < 0) { |
3483 | xhci_err(xhci, "ERR: No room for command on command ring\n"); | |
913a8a34 SS |
3484 | if (command_must_succeed) |
3485 | xhci_err(xhci, "ERR: Reserved TRB counting for " | |
3486 | "unfailable commands failed.\n"); | |
d1dc908a | 3487 | return ret; |
7f84eef0 | 3488 | } |
7e393a83 AX |
3489 | queue_trb(xhci, xhci->cmd_ring, false, false, false, field1, field2, |
3490 | field3, field4 | xhci->cmd_ring->cycle_state); | |
7f84eef0 SS |
3491 | return 0; |
3492 | } | |
3493 | ||
3ffbba95 | 3494 | /* Queue a slot enable or disable request on the command ring */ |
23e3be11 | 3495 | int xhci_queue_slot_control(struct xhci_hcd *xhci, u32 trb_type, u32 slot_id) |
3ffbba95 SS |
3496 | { |
3497 | return queue_command(xhci, 0, 0, 0, | |
913a8a34 | 3498 | TRB_TYPE(trb_type) | SLOT_ID_FOR_TRB(slot_id), false); |
3ffbba95 SS |
3499 | } |
3500 | ||
3501 | /* Queue an address device command TRB */ | |
23e3be11 SS |
3502 | int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, |
3503 | u32 slot_id) | |
3ffbba95 | 3504 | { |
8e595a5d SS |
3505 | return queue_command(xhci, lower_32_bits(in_ctx_ptr), |
3506 | upper_32_bits(in_ctx_ptr), 0, | |
913a8a34 | 3507 | TRB_TYPE(TRB_ADDR_DEV) | SLOT_ID_FOR_TRB(slot_id), |
2a8f82c4 SS |
3508 | false); |
3509 | } | |
3510 | ||
0238634d SS |
3511 | int xhci_queue_vendor_command(struct xhci_hcd *xhci, |
3512 | u32 field1, u32 field2, u32 field3, u32 field4) | |
3513 | { | |
3514 | return queue_command(xhci, field1, field2, field3, field4, false); | |
3515 | } | |
3516 | ||
2a8f82c4 SS |
3517 | /* Queue a reset device command TRB */ |
3518 | int xhci_queue_reset_device(struct xhci_hcd *xhci, u32 slot_id) | |
3519 | { | |
3520 | return queue_command(xhci, 0, 0, 0, | |
3521 | TRB_TYPE(TRB_RESET_DEV) | SLOT_ID_FOR_TRB(slot_id), | |
913a8a34 | 3522 | false); |
3ffbba95 | 3523 | } |
f94e0186 SS |
3524 | |
3525 | /* Queue a configure endpoint command TRB */ | |
23e3be11 | 3526 | int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, |
913a8a34 | 3527 | u32 slot_id, bool command_must_succeed) |
f94e0186 | 3528 | { |
8e595a5d SS |
3529 | return queue_command(xhci, lower_32_bits(in_ctx_ptr), |
3530 | upper_32_bits(in_ctx_ptr), 0, | |
913a8a34 SS |
3531 | TRB_TYPE(TRB_CONFIG_EP) | SLOT_ID_FOR_TRB(slot_id), |
3532 | command_must_succeed); | |
f94e0186 | 3533 | } |
ae636747 | 3534 | |
f2217e8e SS |
3535 | /* Queue an evaluate context command TRB */ |
3536 | int xhci_queue_evaluate_context(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, | |
3537 | u32 slot_id) | |
3538 | { | |
3539 | return queue_command(xhci, lower_32_bits(in_ctx_ptr), | |
3540 | upper_32_bits(in_ctx_ptr), 0, | |
913a8a34 SS |
3541 | TRB_TYPE(TRB_EVAL_CONTEXT) | SLOT_ID_FOR_TRB(slot_id), |
3542 | false); | |
f2217e8e SS |
3543 | } |
3544 | ||
be88fe4f AX |
3545 | /* |
3546 | * Suspend is set to indicate "Stop Endpoint Command" is being issued to stop | |
3547 | * activity on an endpoint that is about to be suspended. | |
3548 | */ | |
23e3be11 | 3549 | int xhci_queue_stop_endpoint(struct xhci_hcd *xhci, int slot_id, |
be88fe4f | 3550 | unsigned int ep_index, int suspend) |
ae636747 SS |
3551 | { |
3552 | u32 trb_slot_id = SLOT_ID_FOR_TRB(slot_id); | |
3553 | u32 trb_ep_index = EP_ID_FOR_TRB(ep_index); | |
3554 | u32 type = TRB_TYPE(TRB_STOP_RING); | |
be88fe4f | 3555 | u32 trb_suspend = SUSPEND_PORT_FOR_TRB(suspend); |
ae636747 SS |
3556 | |
3557 | return queue_command(xhci, 0, 0, 0, | |
be88fe4f | 3558 | trb_slot_id | trb_ep_index | type | trb_suspend, false); |
ae636747 SS |
3559 | } |
3560 | ||
3561 | /* Set Transfer Ring Dequeue Pointer command. | |
3562 | * This should not be used for endpoints that have streams enabled. | |
3563 | */ | |
3564 | static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id, | |
e9df17eb SS |
3565 | unsigned int ep_index, unsigned int stream_id, |
3566 | struct xhci_segment *deq_seg, | |
ae636747 SS |
3567 | union xhci_trb *deq_ptr, u32 cycle_state) |
3568 | { | |
3569 | dma_addr_t addr; | |
3570 | u32 trb_slot_id = SLOT_ID_FOR_TRB(slot_id); | |
3571 | u32 trb_ep_index = EP_ID_FOR_TRB(ep_index); | |
e9df17eb | 3572 | u32 trb_stream_id = STREAM_ID_FOR_TRB(stream_id); |
ae636747 | 3573 | u32 type = TRB_TYPE(TRB_SET_DEQ); |
bf161e85 | 3574 | struct xhci_virt_ep *ep; |
ae636747 | 3575 | |
23e3be11 | 3576 | addr = xhci_trb_virt_to_dma(deq_seg, deq_ptr); |
c92bcfa7 | 3577 | if (addr == 0) { |
ae636747 | 3578 | xhci_warn(xhci, "WARN Cannot submit Set TR Deq Ptr\n"); |
700e2052 GKH |
3579 | xhci_warn(xhci, "WARN deq seg = %p, deq pt = %p\n", |
3580 | deq_seg, deq_ptr); | |
c92bcfa7 SS |
3581 | return 0; |
3582 | } | |
bf161e85 SS |
3583 | ep = &xhci->devs[slot_id]->eps[ep_index]; |
3584 | if ((ep->ep_state & SET_DEQ_PENDING)) { | |
3585 | xhci_warn(xhci, "WARN Cannot submit Set TR Deq Ptr\n"); | |
3586 | xhci_warn(xhci, "A Set TR Deq Ptr command is pending.\n"); | |
3587 | return 0; | |
3588 | } | |
3589 | ep->queued_deq_seg = deq_seg; | |
3590 | ep->queued_deq_ptr = deq_ptr; | |
8e595a5d | 3591 | return queue_command(xhci, lower_32_bits(addr) | cycle_state, |
e9df17eb | 3592 | upper_32_bits(addr), trb_stream_id, |
913a8a34 | 3593 | trb_slot_id | trb_ep_index | type, false); |
ae636747 | 3594 | } |
a1587d97 SS |
3595 | |
3596 | int xhci_queue_reset_ep(struct xhci_hcd *xhci, int slot_id, | |
3597 | unsigned int ep_index) | |
3598 | { | |
3599 | u32 trb_slot_id = SLOT_ID_FOR_TRB(slot_id); | |
3600 | u32 trb_ep_index = EP_ID_FOR_TRB(ep_index); | |
3601 | u32 type = TRB_TYPE(TRB_RESET_EP); | |
3602 | ||
913a8a34 SS |
3603 | return queue_command(xhci, 0, 0, 0, trb_slot_id | trb_ep_index | type, |
3604 | false); | |
a1587d97 | 3605 | } |