[mirror_ubuntu-jammy-kernel.git] / drivers / usb / misc / usb3503.c

/*
 * Driver for SMSC USB3503 USB 2.0 hub controller driver
 *
 * Copyright (c) 2012-2013 Dongjin Kim (tobetter@gmail.com)
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */

#include <linux/i2c.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/of_gpio.h>
#include <linux/platform_device.h>
#include <linux/platform_data/usb3503.h>

#define USB3503_VIDL		0x00
#define USB3503_VIDM		0x01
#define USB3503_PIDL		0x02
#define USB3503_PIDM		0x03
#define USB3503_DIDL		0x04
#define USB3503_DIDM		0x05

#define USB3503_CFG1		0x06
#define USB3503_SELF_BUS_PWR	(1 << 7)

#define USB3503_CFG2		0x07
#define USB3503_CFG3		0x08
#define USB3503_NRD		0x09

#define USB3503_PDS		0x0a

#define USB3503_SP_ILOCK	0xe7
#define USB3503_SPILOCK_CONNECT	(1 << 1)
#define USB3503_SPILOCK_CONFIG	(1 << 0)

#define USB3503_CFGP		0xee
#define USB3503_CLKSUSP		(1 << 7)

struct usb3503 {
	enum usb3503_mode	mode;
	struct i2c_client	*client;
	u8	port_off_mask;
	int	gpio_intn;
	int	gpio_reset;
	int	gpio_connect;
};

static int usb3503_write_register(struct i2c_client *client,
		char reg, char data)
{
	return i2c_smbus_write_byte_data(client, reg, data);
}

static int usb3503_read_register(struct i2c_client *client, char reg)
{
	return i2c_smbus_read_byte_data(client, reg);
}

static int usb3503_set_bits(struct i2c_client *client, char reg, char req)
{
	int err;

	err = usb3503_read_register(client, reg);
	if (err < 0)
		return err;

	err = usb3503_write_register(client, reg, err | req);
	if (err < 0)
		return err;

	return 0;
}

static int usb3503_clear_bits(struct i2c_client *client, char reg, char req)
{
	int err;

	err = usb3503_read_register(client, reg);
	if (err < 0)
		return err;

	err = usb3503_write_register(client, reg, err & ~req);
	if (err < 0)
		return err;

	return 0;
}

static int usb3503_reset(int gpio_reset, int state)
{
	if (gpio_is_valid(gpio_reset))
		gpio_set_value(gpio_reset, state);

	/* Wait T_HUBINIT == 4ms for hub logic to stabilize */
	if (state)
		usleep_range(4000, 10000);

	return 0;
}

static int usb3503_switch_mode(struct usb3503 *hub, enum usb3503_mode mode)
{
	struct i2c_client *i2c = hub->client;
	int err = 0;

	switch (mode) {
	case USB3503_MODE_HUB:
		usb3503_reset(hub->gpio_reset, 1);

		/* SP_ILOCK: set connect_n, config_n for config */
		err = usb3503_write_register(i2c, USB3503_SP_ILOCK,
				(USB3503_SPILOCK_CONNECT
				 | USB3503_SPILOCK_CONFIG));
		if (err < 0) {
			dev_err(&i2c->dev, "SP_ILOCK failed (%d)\n", err);
			goto err_hubmode;
		}

		/* PDS : Disable For Self Powered Operation */
		if (hub->port_off_mask) {
			err = usb3503_set_bits(i2c, USB3503_PDS,
					hub->port_off_mask);
			if (err < 0) {
				dev_err(&i2c->dev, "PDS failed (%d)\n", err);
				goto err_hubmode;
			}
		}

		/* CFG1 : SELF_BUS_PWR -> Self-Powerd operation */
		err = usb3503_set_bits(i2c, USB3503_CFG1, USB3503_SELF_BUS_PWR);
		if (err < 0) {
			dev_err(&i2c->dev, "CFG1 failed (%d)\n", err);
			goto err_hubmode;
		}

		/* SP_LOCK: clear connect_n, config_n for hub connect */
		err = usb3503_clear_bits(i2c, USB3503_SP_ILOCK,
				(USB3503_SPILOCK_CONNECT
				 | USB3503_SPILOCK_CONFIG));
		if (err < 0) {
			dev_err(&i2c->dev, "SP_ILOCK failed (%d)\n", err);
			goto err_hubmode;
		}

		hub->mode = mode;
		dev_info(&i2c->dev, "switched to HUB mode\n");
		break;

	case USB3503_MODE_STANDBY:
		usb3503_reset(hub->gpio_reset, 0);

		hub->mode = mode;
		dev_info(&i2c->dev, "switched to STANDBY mode\n");
		break;

	default:
		dev_err(&i2c->dev, "unknown mode is request\n");
		err = -EINVAL;
		break;
	}

err_hubmode:
	return err;
}

static int usb3503_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
{
	struct usb3503_platform_data *pdata = dev_get_platdata(&i2c->dev);
	struct device_node *np = i2c->dev.of_node;
	struct usb3503 *hub;
	int err = -ENOMEM;
	u32 mode = USB3503_MODE_UNKNOWN;
	const u32 *property;
	int len;

	hub = kzalloc(sizeof(struct usb3503), GFP_KERNEL);
	if (!hub) {
		dev_err(&i2c->dev, "private data alloc fail\n");
		return err;
	}

	i2c_set_clientdata(i2c, hub);
	hub->client = i2c;

	if (pdata) {
		hub->port_off_mask	= pdata->port_off_mask;
		hub->gpio_intn		= pdata->gpio_intn;
		hub->gpio_connect	= pdata->gpio_connect;
		hub->gpio_reset		= pdata->gpio_reset;
		hub->mode		= pdata->initial_mode;
	} else if (np) {
		hub->port_off_mask = 0;

		property = of_get_property(np, "disabled-ports", &len);
		if (property && (len / sizeof(u32)) > 0) {
			int i;
			for (i = 0; i < len / sizeof(u32); i++) {
				u32 port = be32_to_cpu(property[i]);
				if ((1 <= port) && (port <= 3))
					hub->port_off_mask |= (1 << port);
			}
		}

		hub->gpio_intn	= of_get_named_gpio(np, "connect-gpios", 0);
		if (hub->gpio_intn == -EPROBE_DEFER)
			return -EPROBE_DEFER;
		hub->gpio_connect = of_get_named_gpio(np, "intn-gpios", 0);
		if (hub->gpio_connect == -EPROBE_DEFER)
			return -EPROBE_DEFER;
		hub->gpio_reset = of_get_named_gpio(np, "reset-gpios", 0);
		if (hub->gpio_reset == -EPROBE_DEFER)
			return -EPROBE_DEFER;
		of_property_read_u32(np, "initial-mode", &mode);
		hub->mode = mode;
	}

	if (gpio_is_valid(hub->gpio_intn)) {
		err = gpio_request_one(hub->gpio_intn,
				GPIOF_OUT_INIT_HIGH, "usb3503 intn");
		if (err) {
			dev_err(&i2c->dev,
					"unable to request GPIO %d as connect pin (%d)\n",
					hub->gpio_intn, err);
			goto err_out;
		}
	}

	if (gpio_is_valid(hub->gpio_connect)) {
		err = gpio_request_one(hub->gpio_connect,
				GPIOF_OUT_INIT_HIGH, "usb3503 connect");
		if (err) {
			dev_err(&i2c->dev,
					"unable to request GPIO %d as connect pin (%d)\n",
					hub->gpio_connect, err);
			goto err_gpio_connect;
		}
	}

	if (gpio_is_valid(hub->gpio_reset)) {
		err = gpio_request_one(hub->gpio_reset,
				GPIOF_OUT_INIT_LOW, "usb3503 reset");
		if (err) {
			dev_err(&i2c->dev,
					"unable to request GPIO %d as reset pin (%d)\n",
					hub->gpio_reset, err);
			goto err_gpio_reset;
		}
	}

	usb3503_switch_mode(hub, hub->mode);

	dev_info(&i2c->dev, "%s: probed on  %s mode\n", __func__,
			(hub->mode == USB3503_MODE_HUB) ? "hub" : "standby");

	return 0;

err_gpio_reset:
	if (gpio_is_valid(hub->gpio_connect))
		gpio_free(hub->gpio_connect);
err_gpio_connect:
	if (gpio_is_valid(hub->gpio_intn))
		gpio_free(hub->gpio_intn);
err_out:
	kfree(hub);

	return err;
}

static int usb3503_remove(struct i2c_client *i2c)
{
	struct usb3503 *hub = i2c_get_clientdata(i2c);

	if (gpio_is_valid(hub->gpio_intn))
		gpio_free(hub->gpio_intn);
	if (gpio_is_valid(hub->gpio_connect))
		gpio_free(hub->gpio_connect);
	if (gpio_is_valid(hub->gpio_reset))
		gpio_free(hub->gpio_reset);

	kfree(hub);

	return 0;
}

static const struct i2c_device_id usb3503_id[] = {
	{ USB3503_I2C_NAME, 0 },
	{ }
};
MODULE_DEVICE_TABLE(i2c, usb3503_id);

#ifdef CONFIG_OF
static const struct of_device_id usb3503_of_match[] = {
	{ .compatible = "smsc,usb3503", },
	{},
};
MODULE_DEVICE_TABLE(of, usb3503_of_match);
#endif

static struct i2c_driver usb3503_driver = {
	.driver = {
		.name = USB3503_I2C_NAME,
		.of_match_table = of_match_ptr(usb3503_of_match),
	},
	.probe		= usb3503_probe,
	.remove		= usb3503_remove,
	.id_table	= usb3503_id,
};

module_i2c_driver(usb3503_driver);

MODULE_AUTHOR("Dongjin Kim <tobetter@gmail.com>");
MODULE_DESCRIPTION("USB3503 USB HUB driver");
MODULE_LICENSE("GPL");
Commit	Line	Data
6a099c63 DK	1	/*
	2	* Driver for SMSC USB3503 USB 2.0 hub controller driver
	3	*
	4	* Copyright (c) 2012-2013 Dongjin Kim (tobetter@gmail.com)
	5	*
	6	* This program is free software; you can redistribute it and/or modify
	7	* it under the terms of the GNU General Public License as published by
	8	* the Free Software Foundation; either version 2 of the License, or
	9	* (at your option) any later version.
	10	*
	11	* This program is distributed in the hope that it will be useful,
	12	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	13	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	14	* GNU General Public License for more details.
	15	*
	16	* You should have received a copy of the GNU General Public License
	17	* along with this program; if not, write to the Free Software
	18	* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
	19	*/
	20
	21	#include <linux/i2c.h>
	22	#include <linux/gpio.h>
	23	#include <linux/delay.h>
	24	#include <linux/slab.h>
	25	#include <linux/module.h>
eab8050c	26	#include <linux/of_gpio.h>
6a099c63 DK	27	#include <linux/platform_device.h>
	28	#include <linux/platform_data/usb3503.h>
	29
	30	#define USB3503_VIDL 0x00
	31	#define USB3503_VIDM 0x01
	32	#define USB3503_PIDL 0x02
	33	#define USB3503_PIDM 0x03
	34	#define USB3503_DIDL 0x04
	35	#define USB3503_DIDM 0x05
	36
	37	#define USB3503_CFG1 0x06
	38	#define USB3503_SELF_BUS_PWR (1 << 7)
	39
	40	#define USB3503_CFG2 0x07
	41	#define USB3503_CFG3 0x08
	42	#define USB3503_NRD 0x09
	43
	44	#define USB3503_PDS 0x0a
6a099c63 DK	45
	46	#define USB3503_SP_ILOCK 0xe7
	47	#define USB3503_SPILOCK_CONNECT (1 << 1)
	48	#define USB3503_SPILOCK_CONFIG (1 << 0)
	49
	50	#define USB3503_CFGP 0xee
	51	#define USB3503_CLKSUSP (1 << 7)
	52
	53	struct usb3503 {
	54	enum usb3503_mode mode;
	55	struct i2c_client *client;
e8e44a48	56	u8 port_off_mask;
6a099c63 DK	57	int gpio_intn;
	58	int gpio_reset;
	59	int gpio_connect;
	60	};
	61
	62	static int usb3503_write_register(struct i2c_client *client,
	63	char reg, char data)
	64	{
	65	return i2c_smbus_write_byte_data(client, reg, data);
	66	}
	67
	68	static int usb3503_read_register(struct i2c_client *client, char reg)
	69	{
	70	return i2c_smbus_read_byte_data(client, reg);
	71	}
	72
	73	static int usb3503_set_bits(struct i2c_client *client, char reg, char req)
	74	{
	75	int err;
	76
	77	err = usb3503_read_register(client, reg);
	78	if (err < 0)
	79	return err;
	80
	81	err = usb3503_write_register(client, reg, err \| req);
	82	if (err < 0)
	83	return err;
	84
	85	return 0;
	86	}
	87
	88	static int usb3503_clear_bits(struct i2c_client *client, char reg, char req)
	89	{
	90	int err;
	91
	92	err = usb3503_read_register(client, reg);
	93	if (err < 0)
	94	return err;
	95
	96	err = usb3503_write_register(client, reg, err & ~req);
	97	if (err < 0)
	98	return err;
	99
	100	return 0;
	101	}
	102
	103	static int usb3503_reset(int gpio_reset, int state)
	104	{
	105	if (gpio_is_valid(gpio_reset))
	106	gpio_set_value(gpio_reset, state);
	107
06a962fa	108	/* Wait T_HUBINIT == 4ms for hub logic to stabilize */
6a099c63	109	if (state)
06a962fa	110	usleep_range(4000, 10000);
6a099c63 DK	111
	112	return 0;
	113	}
	114
	115	static int usb3503_switch_mode(struct usb3503 *hub, enum usb3503_mode mode)
	116	{
	117	struct i2c_client *i2c = hub->client;
	118	int err = 0;
	119
	120	switch (mode) {
	121	case USB3503_MODE_HUB:
	122	usb3503_reset(hub->gpio_reset, 1);
	123
	124	/* SP_ILOCK: set connect_n, config_n for config */
	125	err = usb3503_write_register(i2c, USB3503_SP_ILOCK,
	126	(USB3503_SPILOCK_CONNECT
	127	\| USB3503_SPILOCK_CONFIG));
	128	if (err < 0) {
	129	dev_err(&i2c->dev, "SP_ILOCK failed (%d)\n", err);
	130	goto err_hubmode;
	131	}
	132
e8e44a48 DK	133	/* PDS : Disable For Self Powered Operation */
	134	if (hub->port_off_mask) {
	135	err = usb3503_set_bits(i2c, USB3503_PDS,
	136	hub->port_off_mask);
	137	if (err < 0) {
	138	dev_err(&i2c->dev, "PDS failed (%d)\n", err);
	139	goto err_hubmode;
	140	}
6a099c63 DK	141	}
	142
	143	/* CFG1 : SELF_BUS_PWR -> Self-Powerd operation */
	144	err = usb3503_set_bits(i2c, USB3503_CFG1, USB3503_SELF_BUS_PWR);
	145	if (err < 0) {
	146	dev_err(&i2c->dev, "CFG1 failed (%d)\n", err);
	147	goto err_hubmode;
	148	}
	149
	150	/* SP_LOCK: clear connect_n, config_n for hub connect */
	151	err = usb3503_clear_bits(i2c, USB3503_SP_ILOCK,
	152	(USB3503_SPILOCK_CONNECT
	153	\| USB3503_SPILOCK_CONFIG));
	154	if (err < 0) {
	155	dev_err(&i2c->dev, "SP_ILOCK failed (%d)\n", err);
	156	goto err_hubmode;
	157	}
	158
	159	hub->mode = mode;
	160	dev_info(&i2c->dev, "switched to HUB mode\n");
	161	break;
	162
	163	case USB3503_MODE_STANDBY:
	164	usb3503_reset(hub->gpio_reset, 0);
	165
	166	hub->mode = mode;
	167	dev_info(&i2c->dev, "switched to STANDBY mode\n");
	168	break;
	169
	170	default:
	171	dev_err(&i2c->dev, "unknown mode is request\n");
	172	err = -EINVAL;
	173	break;
	174	}
	175
	176	err_hubmode:
	177	return err;
	178	}
	179
74ff31b8	180	static int usb3503_probe(struct i2c_client i2c, const struct i2c_device_id id)
6a099c63	181	{
b977a306	182	struct usb3503_platform_data *pdata = dev_get_platdata(&i2c->dev);
eab8050c	183	struct device_node *np = i2c->dev.of_node;
6a099c63	184	struct usb3503 *hub;
7a8ea7eb	185	int err = -ENOMEM;
8ab03dd4	186	u32 mode = USB3503_MODE_UNKNOWN;
e8b58b49 DK	187	const u32 *property;
e8b58b49 DK	188	int len;
6a099c63 DK	189
	190	hub = kzalloc(sizeof(struct usb3503), GFP_KERNEL);
	191	if (!hub) {
	192	dev_err(&i2c->dev, "private data alloc fail\n");
7a8ea7eb	193	return err;
6a099c63 DK	194	}
	195
	196	i2c_set_clientdata(i2c, hub);
	197	hub->client = i2c;
	198
eab8050c	199	if (pdata) {
e8e44a48	200	hub->port_off_mask = pdata->port_off_mask;
6a099c63 DK	201	hub->gpio_intn = pdata->gpio_intn;
	202	hub->gpio_connect = pdata->gpio_connect;
	203	hub->gpio_reset = pdata->gpio_reset;
	204	hub->mode = pdata->initial_mode;
eab8050c	205	} else if (np) {
e8b58b49 DK	206	hub->port_off_mask = 0;
	207
	208	property = of_get_property(np, "disabled-ports", &len);
	209	if (property && (len / sizeof(u32)) > 0) {
	210	int i;
	211	for (i = 0; i < len / sizeof(u32); i++) {
	212	u32 port = be32_to_cpu(property[i]);
	213	if ((1 <= port) && (port <= 3))
	214	hub->port_off_mask \|= (1 << port);
	215	}
	216	}
	217
eab8050c DK	218	hub->gpio_intn = of_get_named_gpio(np, "connect-gpios", 0);
	219	if (hub->gpio_intn == -EPROBE_DEFER)
	220	return -EPROBE_DEFER;
	221	hub->gpio_connect = of_get_named_gpio(np, "intn-gpios", 0);
	222	if (hub->gpio_connect == -EPROBE_DEFER)
	223	return -EPROBE_DEFER;
ccf92c94	224	hub->gpio_reset = of_get_named_gpio(np, "reset-gpios", 0);
eab8050c DK	225	if (hub->gpio_reset == -EPROBE_DEFER)
	226	return -EPROBE_DEFER;
	227	of_property_read_u32(np, "initial-mode", &mode);
	228	hub->mode = mode;
6a099c63 DK	229	}
	230
	231	if (gpio_is_valid(hub->gpio_intn)) {
	232	err = gpio_request_one(hub->gpio_intn,
	233	GPIOF_OUT_INIT_HIGH, "usb3503 intn");
	234	if (err) {
	235	dev_err(&i2c->dev,
	236	"unable to request GPIO %d as connect pin (%d)\n",
	237	hub->gpio_intn, err);
7a8ea7eb	238	goto err_out;
6a099c63 DK	239	}
	240	}
	241
	242	if (gpio_is_valid(hub->gpio_connect)) {
	243	err = gpio_request_one(hub->gpio_connect,
	244	GPIOF_OUT_INIT_HIGH, "usb3503 connect");
	245	if (err) {
	246	dev_err(&i2c->dev,
	247	"unable to request GPIO %d as connect pin (%d)\n",
	248	hub->gpio_connect, err);
	249	goto err_gpio_connect;
	250	}
	251	}
	252
	253	if (gpio_is_valid(hub->gpio_reset)) {
	254	err = gpio_request_one(hub->gpio_reset,
	255	GPIOF_OUT_INIT_LOW, "usb3503 reset");
	256	if (err) {
	257	dev_err(&i2c->dev,
	258	"unable to request GPIO %d as reset pin (%d)\n",
	259	hub->gpio_reset, err);
	260	goto err_gpio_reset;
	261	}
	262	}
	263
eab8050c	264	usb3503_switch_mode(hub, hub->mode);
6a099c63 DK	265
	266	dev_info(&i2c->dev, "%s: probed on %s mode\n", __func__,
	267	(hub->mode == USB3503_MODE_HUB) ? "hub" : "standby");
	268
	269	return 0;
	270
	271	err_gpio_reset:
	272	if (gpio_is_valid(hub->gpio_connect))
	273	gpio_free(hub->gpio_connect);
	274	err_gpio_connect:
	275	if (gpio_is_valid(hub->gpio_intn))
	276	gpio_free(hub->gpio_intn);
7a8ea7eb	277	err_out:
6a099c63 DK	278	kfree(hub);
	279
	280	return err;
	281	}
	282
	283	static int usb3503_remove(struct i2c_client *i2c)
	284	{
	285	struct usb3503 *hub = i2c_get_clientdata(i2c);
	286
	287	if (gpio_is_valid(hub->gpio_intn))
	288	gpio_free(hub->gpio_intn);
	289	if (gpio_is_valid(hub->gpio_connect))
	290	gpio_free(hub->gpio_connect);
	291	if (gpio_is_valid(hub->gpio_reset))
	292	gpio_free(hub->gpio_reset);
	293
	294	kfree(hub);
	295
	296	return 0;
	297	}
	298
	299	static const struct i2c_device_id usb3503_id[] = {
	300	{ USB3503_I2C_NAME, 0 },
	301	{ }
	302	};
	303	MODULE_DEVICE_TABLE(i2c, usb3503_id);
	304
eab8050c DK	305	#ifdef CONFIG_OF
	306	static const struct of_device_id usb3503_of_match[] = {
	307	{ .compatible = "smsc,usb3503", },
	308	{},
	309	};
	310	MODULE_DEVICE_TABLE(of, usb3503_of_match);
	311	#endif
	312
6a099c63 DK	313	static struct i2c_driver usb3503_driver = {
	314	.driver = {
	315	.name = USB3503_I2C_NAME,
eab8050c	316	.of_match_table = of_match_ptr(usb3503_of_match),
6a099c63 DK	317	},
	318	.probe = usb3503_probe,
	319	.remove = usb3503_remove,
	320	.id_table = usb3503_id,
	321	};
	322
8244ac04	323	module_i2c_driver(usb3503_driver);
6a099c63 DK	324
	325	MODULE_AUTHOR("Dongjin Kim <tobetter@gmail.com>");
	326	MODULE_DESCRIPTION("USB3503 USB HUB driver");
	327	MODULE_LICENSE("GPL");