]>
Commit | Line | Data |
---|---|---|
5fd54ace | 1 | // SPDX-License-Identifier: GPL-2.0+ |
1da177e4 LT |
2 | /* |
3 | * Edgeport USB Serial Converter driver | |
4 | * | |
5 | * Copyright (C) 2000 Inside Out Networks, All rights reserved. | |
6 | * Copyright (C) 2001-2002 Greg Kroah-Hartman <greg@kroah.com> | |
7 | * | |
1da177e4 LT |
8 | * Supports the following devices: |
9 | * Edgeport/4 | |
10 | * Edgeport/4t | |
11 | * Edgeport/2 | |
12 | * Edgeport/4i | |
13 | * Edgeport/2i | |
14 | * Edgeport/421 | |
15 | * Edgeport/21 | |
16 | * Rapidport/4 | |
17 | * Edgeport/8 | |
18 | * Edgeport/2D8 | |
19 | * Edgeport/4D8 | |
20 | * Edgeport/8i | |
21 | * | |
22 | * For questions or problems with this driver, contact Inside Out | |
23 | * Networks technical support, or Peter Berger <pberger@brimson.com>, | |
24 | * or Al Borchers <alborchers@steinerpoint.com>. | |
25 | * | |
1da177e4 LT |
26 | */ |
27 | ||
1da177e4 LT |
28 | #include <linux/kernel.h> |
29 | #include <linux/jiffies.h> | |
30 | #include <linux/errno.h> | |
1da177e4 LT |
31 | #include <linux/slab.h> |
32 | #include <linux/tty.h> | |
33 | #include <linux/tty_driver.h> | |
34 | #include <linux/tty_flip.h> | |
35 | #include <linux/module.h> | |
36 | #include <linux/spinlock.h> | |
37 | #include <linux/serial.h> | |
38 | #include <linux/ioctl.h> | |
39 | #include <linux/wait.h> | |
5b9ea932 JS |
40 | #include <linux/firmware.h> |
41 | #include <linux/ihex.h> | |
03f0dbf7 | 42 | #include <linux/uaccess.h> |
1da177e4 | 43 | #include <linux/usb.h> |
a969888c | 44 | #include <linux/usb/serial.h> |
1da177e4 LT |
45 | #include "io_edgeport.h" |
46 | #include "io_ionsp.h" /* info for the iosp messages */ | |
47 | #include "io_16654.h" /* 16654 UART defines */ | |
48 | ||
1da177e4 LT |
49 | #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com> and David Iacovelli" |
50 | #define DRIVER_DESC "Edgeport USB Serial Driver" | |
51 | ||
1da177e4 LT |
52 | #define MAX_NAME_LEN 64 |
53 | ||
1da177e4 | 54 | #define OPEN_TIMEOUT (5*HZ) /* 5 seconds */ |
1da177e4 | 55 | |
35d47976 JH |
56 | static const struct usb_device_id edgeport_2port_id_table[] = { |
57 | { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_2) }, | |
58 | { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_2I) }, | |
59 | { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_421) }, | |
60 | { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_21) }, | |
61 | { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_2_DIN) }, | |
62 | { } | |
63 | }; | |
64 | ||
65 | static const struct usb_device_id edgeport_4port_id_table[] = { | |
66 | { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4) }, | |
67 | { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_RAPIDPORT_4) }, | |
68 | { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4T) }, | |
69 | { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_MT4X56USB) }, | |
70 | { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4I) }, | |
71 | { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8_DUAL_CPU) }, | |
72 | { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4_DIN) }, | |
73 | { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_22I) }, | |
74 | { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_412_4) }, | |
75 | { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_COMPATIBLE) }, | |
76 | { } | |
77 | }; | |
78 | ||
79 | static const struct usb_device_id edgeport_8port_id_table[] = { | |
80 | { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8) }, | |
81 | { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_16_DUAL_CPU) }, | |
82 | { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8I) }, | |
83 | { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8R) }, | |
84 | { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8RR) }, | |
85 | { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_412_8) }, | |
86 | { } | |
87 | }; | |
88 | ||
89 | static const struct usb_device_id Epic_port_id_table[] = { | |
90 | { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0202) }, | |
91 | { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0203) }, | |
92 | { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0310) }, | |
93 | { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0311) }, | |
94 | { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0312) }, | |
95 | { USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A758) }, | |
96 | { USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A794) }, | |
97 | { USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A225) }, | |
98 | { } | |
99 | }; | |
100 | ||
101 | /* Devices that this driver supports */ | |
102 | static const struct usb_device_id id_table_combined[] = { | |
103 | { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4) }, | |
104 | { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_RAPIDPORT_4) }, | |
105 | { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4T) }, | |
106 | { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_MT4X56USB) }, | |
107 | { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_2) }, | |
108 | { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4I) }, | |
109 | { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_2I) }, | |
110 | { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_421) }, | |
111 | { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_21) }, | |
112 | { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8_DUAL_CPU) }, | |
113 | { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8) }, | |
114 | { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_2_DIN) }, | |
115 | { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4_DIN) }, | |
116 | { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_16_DUAL_CPU) }, | |
117 | { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_22I) }, | |
118 | { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_412_4) }, | |
119 | { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_COMPATIBLE) }, | |
120 | { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8I) }, | |
121 | { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8R) }, | |
122 | { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8RR) }, | |
123 | { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_412_8) }, | |
124 | { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0202) }, | |
125 | { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0203) }, | |
126 | { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0310) }, | |
127 | { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0311) }, | |
128 | { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0312) }, | |
129 | { USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A758) }, | |
130 | { USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A794) }, | |
131 | { USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A225) }, | |
132 | { } /* Terminating entry */ | |
133 | }; | |
134 | ||
135 | MODULE_DEVICE_TABLE(usb, id_table_combined); | |
136 | ||
137 | ||
1da177e4 LT |
138 | /* receive port state */ |
139 | enum RXSTATE { | |
03f0dbf7 AC |
140 | EXPECT_HDR1 = 0, /* Expect header byte 1 */ |
141 | EXPECT_HDR2 = 1, /* Expect header byte 2 */ | |
142 | EXPECT_DATA = 2, /* Expect 'RxBytesRemaining' data */ | |
143 | EXPECT_HDR3 = 3, /* Expect header byte 3 (for status hdrs only) */ | |
1da177e4 LT |
144 | }; |
145 | ||
146 | ||
03f0dbf7 AC |
147 | /* Transmit Fifo |
148 | * This Transmit queue is an extension of the edgeport Rx buffer. | |
149 | * The maximum amount of data buffered in both the edgeport | |
1da177e4 LT |
150 | * Rx buffer (maxTxCredits) and this buffer will never exceed maxTxCredits. |
151 | */ | |
152 | struct TxFifo { | |
153 | unsigned int head; /* index to head pointer (write) */ | |
154 | unsigned int tail; /* index to tail pointer (read) */ | |
155 | unsigned int count; /* Bytes in queue */ | |
156 | unsigned int size; /* Max size of queue (equal to Max number of TxCredits) */ | |
157 | unsigned char *fifo; /* allocated Buffer */ | |
158 | }; | |
159 | ||
160 | /* This structure holds all of the local port information */ | |
161 | struct edgeport_port { | |
162 | __u16 txCredits; /* our current credits for this port */ | |
163 | __u16 maxTxCredits; /* the max size of the port */ | |
164 | ||
165 | struct TxFifo txfifo; /* transmit fifo -- size will be maxTxCredits */ | |
166 | struct urb *write_urb; /* write URB for this port */ | |
cb8eaa8b | 167 | bool write_in_progress; /* 'true' while a write URB is outstanding */ |
1da177e4 LT |
168 | spinlock_t ep_lock; |
169 | ||
170 | __u8 shadowLCR; /* last LCR value received */ | |
171 | __u8 shadowMCR; /* last MCR value received */ | |
172 | __u8 shadowMSR; /* last MSR value received */ | |
173 | __u8 shadowLSR; /* last LSR value received */ | |
174 | __u8 shadowXonChar; /* last value set as XON char in Edgeport */ | |
175 | __u8 shadowXoffChar; /* last value set as XOFF char in Edgeport */ | |
176 | __u8 validDataMask; | |
177 | __u32 baudRate; | |
178 | ||
cb8eaa8b RK |
179 | bool open; |
180 | bool openPending; | |
181 | bool commandPending; | |
182 | bool closePending; | |
183 | bool chaseResponsePending; | |
1da177e4 LT |
184 | |
185 | wait_queue_head_t wait_chase; /* for handling sleeping while waiting for chase to finish */ | |
186 | wait_queue_head_t wait_open; /* for handling sleeping while waiting for open to finish */ | |
187 | wait_queue_head_t wait_command; /* for handling sleeping while waiting for command to finish */ | |
1da177e4 | 188 | |
1da177e4 LT |
189 | struct usb_serial_port *port; /* loop back to the owner of this object */ |
190 | }; | |
191 | ||
192 | ||
193 | /* This structure holds all of the individual device information */ | |
194 | struct edgeport_serial { | |
ad93375a | 195 | char name[MAX_NAME_LEN+2]; /* string name of this device */ |
1da177e4 LT |
196 | |
197 | struct edge_manuf_descriptor manuf_descriptor; /* the manufacturer descriptor */ | |
198 | struct edge_boot_descriptor boot_descriptor; /* the boot firmware descriptor */ | |
199 | struct edgeport_product_info product_info; /* Product Info */ | |
6e8cf775 GKH |
200 | struct edge_compatibility_descriptor epic_descriptor; /* Edgeport compatible descriptor */ |
201 | int is_epic; /* flag if EPiC device or not */ | |
1da177e4 LT |
202 | |
203 | __u8 interrupt_in_endpoint; /* the interrupt endpoint handle */ | |
03f0dbf7 AC |
204 | unsigned char *interrupt_in_buffer; /* the buffer we use for the interrupt endpoint */ |
205 | struct urb *interrupt_read_urb; /* our interrupt urb */ | |
1da177e4 LT |
206 | |
207 | __u8 bulk_in_endpoint; /* the bulk in endpoint handle */ | |
03f0dbf7 AC |
208 | unsigned char *bulk_in_buffer; /* the buffer we use for the bulk in endpoint */ |
209 | struct urb *read_urb; /* our bulk read urb */ | |
cb8eaa8b | 210 | bool read_in_progress; |
1da177e4 LT |
211 | spinlock_t es_lock; |
212 | ||
213 | __u8 bulk_out_endpoint; /* the bulk out endpoint handle */ | |
214 | ||
215 | __s16 rxBytesAvail; /* the number of bytes that we need to read from this device */ | |
216 | ||
217 | enum RXSTATE rxState; /* the current state of the bulk receive processor */ | |
218 | __u8 rxHeader1; /* receive header byte 1 */ | |
219 | __u8 rxHeader2; /* receive header byte 2 */ | |
220 | __u8 rxHeader3; /* receive header byte 3 */ | |
221 | __u8 rxPort; /* the port that we are currently receiving data for */ | |
222 | __u8 rxStatusCode; /* the receive status code */ | |
223 | __u8 rxStatusParam; /* the receive status paramater */ | |
224 | __s16 rxBytesRemaining; /* the number of port bytes left to read */ | |
225 | struct usb_serial *serial; /* loop back to the owner of this object */ | |
226 | }; | |
227 | ||
228 | /* baud rate information */ | |
229 | struct divisor_table_entry { | |
230 | __u32 BaudRate; | |
231 | __u16 Divisor; | |
232 | }; | |
233 | ||
03f0dbf7 AC |
234 | /* |
235 | * Define table of divisors for Rev A EdgePort/4 hardware | |
236 | * These assume a 3.6864MHz crystal, the standard /16, and | |
237 | * MCR.7 = 0. | |
238 | */ | |
239 | ||
4c4c9432 | 240 | static const struct divisor_table_entry divisor_table[] = { |
03f0dbf7 AC |
241 | { 50, 4608}, |
242 | { 75, 3072}, | |
243 | { 110, 2095}, /* 2094.545455 => 230450 => .0217 % over */ | |
244 | { 134, 1713}, /* 1713.011152 => 230398.5 => .00065% under */ | |
1da177e4 LT |
245 | { 150, 1536}, |
246 | { 300, 768}, | |
247 | { 600, 384}, | |
248 | { 1200, 192}, | |
249 | { 1800, 128}, | |
250 | { 2400, 96}, | |
251 | { 4800, 48}, | |
252 | { 7200, 32}, | |
253 | { 9600, 24}, | |
254 | { 14400, 16}, | |
255 | { 19200, 12}, | |
256 | { 38400, 6}, | |
257 | { 57600, 4}, | |
258 | { 115200, 2}, | |
259 | { 230400, 1}, | |
260 | }; | |
261 | ||
36ccce49 GKH |
262 | /* Number of outstanding Command Write Urbs */ |
263 | static atomic_t CmdUrbs = ATOMIC_INIT(0); | |
1da177e4 LT |
264 | |
265 | ||
266 | /* local function prototypes */ | |
267 | ||
268 | /* function prototypes for all URB callbacks */ | |
03f0dbf7 AC |
269 | static void edge_interrupt_callback(struct urb *urb); |
270 | static void edge_bulk_in_callback(struct urb *urb); | |
271 | static void edge_bulk_out_data_callback(struct urb *urb); | |
272 | static void edge_bulk_out_cmd_callback(struct urb *urb); | |
1da177e4 LT |
273 | |
274 | /* function prototypes for the usbserial callbacks */ | |
a509a7e4 | 275 | static int edge_open(struct tty_struct *tty, struct usb_serial_port *port); |
335f8514 | 276 | static void edge_close(struct usb_serial_port *port); |
03f0dbf7 AC |
277 | static int edge_write(struct tty_struct *tty, struct usb_serial_port *port, |
278 | const unsigned char *buf, int count); | |
279 | static int edge_write_room(struct tty_struct *tty); | |
280 | static int edge_chars_in_buffer(struct tty_struct *tty); | |
281 | static void edge_throttle(struct tty_struct *tty); | |
282 | static void edge_unthrottle(struct tty_struct *tty); | |
283 | static void edge_set_termios(struct tty_struct *tty, | |
284 | struct usb_serial_port *port, | |
285 | struct ktermios *old_termios); | |
00a0d0d6 | 286 | static int edge_ioctl(struct tty_struct *tty, |
03f0dbf7 AC |
287 | unsigned int cmd, unsigned long arg); |
288 | static void edge_break(struct tty_struct *tty, int break_state); | |
60b33c13 | 289 | static int edge_tiocmget(struct tty_struct *tty); |
20b9d177 | 290 | static int edge_tiocmset(struct tty_struct *tty, |
03f0dbf7 AC |
291 | unsigned int set, unsigned int clear); |
292 | static int edge_startup(struct usb_serial *serial); | |
f9c99bb8 AS |
293 | static void edge_disconnect(struct usb_serial *serial); |
294 | static void edge_release(struct usb_serial *serial); | |
c27f3efc JH |
295 | static int edge_port_probe(struct usb_serial_port *port); |
296 | static int edge_port_remove(struct usb_serial_port *port); | |
1da177e4 | 297 | |
1da177e4 | 298 | /* function prototypes for all of our local functions */ |
03f0dbf7 AC |
299 | |
300 | static void process_rcvd_data(struct edgeport_serial *edge_serial, | |
301 | unsigned char *buffer, __u16 bufferLength); | |
302 | static void process_rcvd_status(struct edgeport_serial *edge_serial, | |
303 | __u8 byte2, __u8 byte3); | |
2e124b4a JS |
304 | static void edge_tty_recv(struct usb_serial_port *port, unsigned char *data, |
305 | int length); | |
03f0dbf7 AC |
306 | static void handle_new_msr(struct edgeport_port *edge_port, __u8 newMsr); |
307 | static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData, | |
308 | __u8 lsr, __u8 data); | |
309 | static int send_iosp_ext_cmd(struct edgeport_port *edge_port, __u8 command, | |
310 | __u8 param); | |
984f6868 | 311 | static int calc_baud_rate_divisor(struct device *dev, int baud_rate, int *divisor); |
03f0dbf7 AC |
312 | static int send_cmd_write_baud_rate(struct edgeport_port *edge_port, |
313 | int baudRate); | |
314 | static void change_port_settings(struct tty_struct *tty, | |
315 | struct edgeport_port *edge_port, | |
316 | struct ktermios *old_termios); | |
317 | static int send_cmd_write_uart_register(struct edgeport_port *edge_port, | |
318 | __u8 regNum, __u8 regValue); | |
319 | static int write_cmd_usb(struct edgeport_port *edge_port, | |
320 | unsigned char *buffer, int writeLength); | |
321 | static void send_more_port_data(struct edgeport_serial *edge_serial, | |
322 | struct edgeport_port *edge_port); | |
323 | ||
324 | static int sram_write(struct usb_serial *serial, __u16 extAddr, __u16 addr, | |
325 | __u16 length, const __u8 *data); | |
326 | static int rom_read(struct usb_serial *serial, __u16 extAddr, __u16 addr, | |
327 | __u16 length, __u8 *data); | |
328 | static int rom_write(struct usb_serial *serial, __u16 extAddr, __u16 addr, | |
329 | __u16 length, const __u8 *data); | |
330 | static void get_manufacturing_desc(struct edgeport_serial *edge_serial); | |
331 | static void get_boot_desc(struct edgeport_serial *edge_serial); | |
332 | static void load_application_firmware(struct edgeport_serial *edge_serial); | |
333 | ||
334 | static void unicode_to_ascii(char *string, int buflen, | |
335 | __le16 *unicode, int unicode_size); | |
336 | ||
337 | ||
338 | /* ************************************************************************ */ | |
339 | /* ************************************************************************ */ | |
340 | /* ************************************************************************ */ | |
341 | /* ************************************************************************ */ | |
1da177e4 LT |
342 | |
343 | /************************************************************************ | |
344 | * * | |
345 | * update_edgeport_E2PROM() Compare current versions of * | |
346 | * Boot ROM and Manufacture * | |
347 | * Descriptors with versions * | |
348 | * embedded in this driver * | |
349 | * * | |
350 | ************************************************************************/ | |
03f0dbf7 | 351 | static void update_edgeport_E2PROM(struct edgeport_serial *edge_serial) |
1da177e4 | 352 | { |
984f6868 | 353 | struct device *dev = &edge_serial->serial->dev->dev; |
1da177e4 LT |
354 | __u32 BootCurVer; |
355 | __u32 BootNewVer; | |
5b9ea932 JS |
356 | __u8 BootMajorVersion; |
357 | __u8 BootMinorVersion; | |
358 | __u16 BootBuildNumber; | |
359 | __u32 Bootaddr; | |
360 | const struct ihex_binrec *rec; | |
361 | const struct firmware *fw; | |
362 | const char *fw_name; | |
1da177e4 LT |
363 | int response; |
364 | ||
1da177e4 | 365 | switch (edge_serial->product_info.iDownloadFile) { |
03f0dbf7 AC |
366 | case EDGE_DOWNLOAD_FILE_I930: |
367 | fw_name = "edgeport/boot.fw"; | |
368 | break; | |
369 | case EDGE_DOWNLOAD_FILE_80251: | |
370 | fw_name = "edgeport/boot2.fw"; | |
371 | break; | |
372 | default: | |
373 | return; | |
1da177e4 LT |
374 | } |
375 | ||
5b9ea932 JS |
376 | response = request_ihex_firmware(&fw, fw_name, |
377 | &edge_serial->serial->dev->dev); | |
378 | if (response) { | |
984f6868 | 379 | dev_err(dev, "Failed to load image \"%s\" err %d\n", |
5b9ea932 JS |
380 | fw_name, response); |
381 | return; | |
382 | } | |
383 | ||
384 | rec = (const struct ihex_binrec *)fw->data; | |
385 | BootMajorVersion = rec->data[0]; | |
386 | BootMinorVersion = rec->data[1]; | |
387 | BootBuildNumber = (rec->data[2] << 8) | rec->data[3]; | |
388 | ||
03f0dbf7 | 389 | /* Check Boot Image Version */ |
1da177e4 LT |
390 | BootCurVer = (edge_serial->boot_descriptor.MajorVersion << 24) + |
391 | (edge_serial->boot_descriptor.MinorVersion << 16) + | |
392 | le16_to_cpu(edge_serial->boot_descriptor.BuildNumber); | |
393 | ||
394 | BootNewVer = (BootMajorVersion << 24) + | |
395 | (BootMinorVersion << 16) + | |
5b9ea932 | 396 | BootBuildNumber; |
1da177e4 | 397 | |
984f6868 | 398 | dev_dbg(dev, "Current Boot Image version %d.%d.%d\n", |
1da177e4 LT |
399 | edge_serial->boot_descriptor.MajorVersion, |
400 | edge_serial->boot_descriptor.MinorVersion, | |
401 | le16_to_cpu(edge_serial->boot_descriptor.BuildNumber)); | |
402 | ||
403 | ||
404 | if (BootNewVer > BootCurVer) { | |
984f6868 | 405 | dev_dbg(dev, "**Update Boot Image from %d.%d.%d to %d.%d.%d\n", |
1da177e4 LT |
406 | edge_serial->boot_descriptor.MajorVersion, |
407 | edge_serial->boot_descriptor.MinorVersion, | |
408 | le16_to_cpu(edge_serial->boot_descriptor.BuildNumber), | |
5b9ea932 | 409 | BootMajorVersion, BootMinorVersion, BootBuildNumber); |
1da177e4 | 410 | |
984f6868 | 411 | dev_dbg(dev, "Downloading new Boot Image\n"); |
1da177e4 | 412 | |
5b9ea932 JS |
413 | for (rec = ihex_next_binrec(rec); rec; |
414 | rec = ihex_next_binrec(rec)) { | |
415 | Bootaddr = be32_to_cpu(rec->addr); | |
416 | response = rom_write(edge_serial->serial, | |
417 | Bootaddr >> 16, | |
418 | Bootaddr & 0xFFFF, | |
419 | be16_to_cpu(rec->len), | |
420 | &rec->data[0]); | |
1da177e4 | 421 | if (response < 0) { |
5b9ea932 JS |
422 | dev_err(&edge_serial->serial->dev->dev, |
423 | "rom_write failed (%x, %x, %d)\n", | |
424 | Bootaddr >> 16, Bootaddr & 0xFFFF, | |
425 | be16_to_cpu(rec->len)); | |
1da177e4 LT |
426 | break; |
427 | } | |
428 | } | |
429 | } else { | |
984f6868 | 430 | dev_dbg(dev, "Boot Image -- already up to date\n"); |
1da177e4 | 431 | } |
5b9ea932 | 432 | release_firmware(fw); |
1da177e4 LT |
433 | } |
434 | ||
1da177e4 LT |
435 | #if 0 |
436 | /************************************************************************ | |
437 | * | |
438 | * Get string descriptor from device | |
439 | * | |
440 | ************************************************************************/ | |
03f0dbf7 AC |
441 | static int get_string_desc(struct usb_device *dev, int Id, |
442 | struct usb_string_descriptor **pRetDesc) | |
1da177e4 LT |
443 | { |
444 | struct usb_string_descriptor StringDesc; | |
445 | struct usb_string_descriptor *pStringDesc; | |
446 | ||
984f6868 | 447 | dev_dbg(&dev->dev, "%s - USB String ID = %d\n", __func__, Id); |
1da177e4 | 448 | |
03f0dbf7 AC |
449 | if (!usb_get_descriptor(dev, USB_DT_STRING, Id, &StringDesc, |
450 | sizeof(StringDesc))) | |
1da177e4 | 451 | return 0; |
1da177e4 | 452 | |
03f0dbf7 AC |
453 | pStringDesc = kmalloc(StringDesc.bLength, GFP_KERNEL); |
454 | if (!pStringDesc) | |
1da177e4 | 455 | return -1; |
1da177e4 | 456 | |
03f0dbf7 AC |
457 | if (!usb_get_descriptor(dev, USB_DT_STRING, Id, pStringDesc, |
458 | StringDesc.bLength)) { | |
1da177e4 LT |
459 | kfree(pStringDesc); |
460 | return -1; | |
461 | } | |
462 | ||
463 | *pRetDesc = pStringDesc; | |
464 | return 0; | |
465 | } | |
466 | #endif | |
467 | ||
984f6868 GKH |
468 | static void dump_product_info(struct edgeport_serial *edge_serial, |
469 | struct edgeport_product_info *product_info) | |
6e8cf775 | 470 | { |
984f6868 GKH |
471 | struct device *dev = &edge_serial->serial->dev->dev; |
472 | ||
03f0dbf7 | 473 | /* Dump Product Info structure */ |
984f6868 GKH |
474 | dev_dbg(dev, "**Product Information:\n"); |
475 | dev_dbg(dev, " ProductId %x\n", product_info->ProductId); | |
476 | dev_dbg(dev, " NumPorts %d\n", product_info->NumPorts); | |
477 | dev_dbg(dev, " ProdInfoVer %d\n", product_info->ProdInfoVer); | |
478 | dev_dbg(dev, " IsServer %d\n", product_info->IsServer); | |
479 | dev_dbg(dev, " IsRS232 %d\n", product_info->IsRS232); | |
480 | dev_dbg(dev, " IsRS422 %d\n", product_info->IsRS422); | |
481 | dev_dbg(dev, " IsRS485 %d\n", product_info->IsRS485); | |
482 | dev_dbg(dev, " RomSize %d\n", product_info->RomSize); | |
483 | dev_dbg(dev, " RamSize %d\n", product_info->RamSize); | |
484 | dev_dbg(dev, " CpuRev %x\n", product_info->CpuRev); | |
485 | dev_dbg(dev, " BoardRev %x\n", product_info->BoardRev); | |
486 | dev_dbg(dev, " BootMajorVersion %d.%d.%d\n", | |
487 | product_info->BootMajorVersion, | |
488 | product_info->BootMinorVersion, | |
489 | le16_to_cpu(product_info->BootBuildNumber)); | |
490 | dev_dbg(dev, " FirmwareMajorVersion %d.%d.%d\n", | |
491 | product_info->FirmwareMajorVersion, | |
492 | product_info->FirmwareMinorVersion, | |
493 | le16_to_cpu(product_info->FirmwareBuildNumber)); | |
494 | dev_dbg(dev, " ManufactureDescDate %d/%d/%d\n", | |
495 | product_info->ManufactureDescDate[0], | |
496 | product_info->ManufactureDescDate[1], | |
497 | product_info->ManufactureDescDate[2]+1900); | |
498 | dev_dbg(dev, " iDownloadFile 0x%x\n", | |
499 | product_info->iDownloadFile); | |
500 | dev_dbg(dev, " EpicVer %d\n", product_info->EpicVer); | |
6e8cf775 GKH |
501 | } |
502 | ||
1da177e4 LT |
503 | static void get_product_info(struct edgeport_serial *edge_serial) |
504 | { | |
505 | struct edgeport_product_info *product_info = &edge_serial->product_info; | |
506 | ||
03f0dbf7 AC |
507 | memset(product_info, 0, sizeof(struct edgeport_product_info)); |
508 | ||
509 | product_info->ProductId = (__u16)(le16_to_cpu(edge_serial->serial->dev->descriptor.idProduct) & ~ION_DEVICE_ID_80251_NETCHIP); | |
510 | product_info->NumPorts = edge_serial->manuf_descriptor.NumPorts; | |
511 | product_info->ProdInfoVer = 0; | |
512 | ||
513 | product_info->RomSize = edge_serial->manuf_descriptor.RomSize; | |
514 | product_info->RamSize = edge_serial->manuf_descriptor.RamSize; | |
515 | product_info->CpuRev = edge_serial->manuf_descriptor.CpuRev; | |
516 | product_info->BoardRev = edge_serial->manuf_descriptor.BoardRev; | |
517 | ||
518 | product_info->BootMajorVersion = | |
519 | edge_serial->boot_descriptor.MajorVersion; | |
520 | product_info->BootMinorVersion = | |
521 | edge_serial->boot_descriptor.MinorVersion; | |
522 | product_info->BootBuildNumber = | |
523 | edge_serial->boot_descriptor.BuildNumber; | |
524 | ||
525 | memcpy(product_info->ManufactureDescDate, | |
526 | edge_serial->manuf_descriptor.DescDate, | |
527 | sizeof(edge_serial->manuf_descriptor.DescDate)); | |
528 | ||
529 | /* check if this is 2nd generation hardware */ | |
530 | if (le16_to_cpu(edge_serial->serial->dev->descriptor.idProduct) | |
531 | & ION_DEVICE_ID_80251_NETCHIP) | |
532 | product_info->iDownloadFile = EDGE_DOWNLOAD_FILE_80251; | |
533 | else | |
534 | product_info->iDownloadFile = EDGE_DOWNLOAD_FILE_I930; | |
984f6868 | 535 | |
03f0dbf7 | 536 | /* Determine Product type and set appropriate flags */ |
1da177e4 | 537 | switch (DEVICE_ID_FROM_USB_PRODUCT_ID(product_info->ProductId)) { |
03f0dbf7 AC |
538 | case ION_DEVICE_ID_EDGEPORT_COMPATIBLE: |
539 | case ION_DEVICE_ID_EDGEPORT_4T: | |
540 | case ION_DEVICE_ID_EDGEPORT_4: | |
541 | case ION_DEVICE_ID_EDGEPORT_2: | |
542 | case ION_DEVICE_ID_EDGEPORT_8_DUAL_CPU: | |
543 | case ION_DEVICE_ID_EDGEPORT_8: | |
544 | case ION_DEVICE_ID_EDGEPORT_421: | |
545 | case ION_DEVICE_ID_EDGEPORT_21: | |
546 | case ION_DEVICE_ID_EDGEPORT_2_DIN: | |
547 | case ION_DEVICE_ID_EDGEPORT_4_DIN: | |
548 | case ION_DEVICE_ID_EDGEPORT_16_DUAL_CPU: | |
549 | product_info->IsRS232 = 1; | |
550 | break; | |
1da177e4 | 551 | |
03f0dbf7 AC |
552 | case ION_DEVICE_ID_EDGEPORT_2I: /* Edgeport/2 RS422/RS485 */ |
553 | product_info->IsRS422 = 1; | |
554 | product_info->IsRS485 = 1; | |
555 | break; | |
1da177e4 | 556 | |
03f0dbf7 AC |
557 | case ION_DEVICE_ID_EDGEPORT_8I: /* Edgeport/4 RS422 */ |
558 | case ION_DEVICE_ID_EDGEPORT_4I: /* Edgeport/4 RS422 */ | |
559 | product_info->IsRS422 = 1; | |
560 | break; | |
1da177e4 LT |
561 | } |
562 | ||
984f6868 | 563 | dump_product_info(edge_serial, product_info); |
6e8cf775 | 564 | } |
1da177e4 | 565 | |
6e8cf775 GKH |
566 | static int get_epic_descriptor(struct edgeport_serial *ep) |
567 | { | |
568 | int result; | |
569 | struct usb_serial *serial = ep->serial; | |
570 | struct edgeport_product_info *product_info = &ep->product_info; | |
e4457d97 | 571 | struct edge_compatibility_descriptor *epic; |
6e8cf775 | 572 | struct edge_compatibility_bits *bits; |
984f6868 | 573 | struct device *dev = &serial->dev->dev; |
6e8cf775 GKH |
574 | |
575 | ep->is_epic = 0; | |
e4457d97 JH |
576 | |
577 | epic = kmalloc(sizeof(*epic), GFP_KERNEL); | |
578 | if (!epic) | |
579 | return -ENOMEM; | |
580 | ||
6e8cf775 GKH |
581 | result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), |
582 | USB_REQUEST_ION_GET_EPIC_DESC, | |
583 | 0xC0, 0x00, 0x00, | |
e4457d97 | 584 | epic, sizeof(*epic), |
6e8cf775 | 585 | 300); |
e4457d97 | 586 | if (result == sizeof(*epic)) { |
6e8cf775 | 587 | ep->is_epic = 1; |
e4457d97 | 588 | memcpy(&ep->epic_descriptor, epic, sizeof(*epic)); |
6e8cf775 GKH |
589 | memset(product_info, 0, sizeof(struct edgeport_product_info)); |
590 | ||
03f0dbf7 AC |
591 | product_info->NumPorts = epic->NumPorts; |
592 | product_info->ProdInfoVer = 0; | |
593 | product_info->FirmwareMajorVersion = epic->MajorVersion; | |
594 | product_info->FirmwareMinorVersion = epic->MinorVersion; | |
595 | product_info->FirmwareBuildNumber = epic->BuildNumber; | |
596 | product_info->iDownloadFile = epic->iDownloadFile; | |
597 | product_info->EpicVer = epic->EpicVer; | |
598 | product_info->Epic = epic->Supports; | |
599 | product_info->ProductId = ION_DEVICE_ID_EDGEPORT_COMPATIBLE; | |
984f6868 | 600 | dump_product_info(ep, product_info); |
6e8cf775 GKH |
601 | |
602 | bits = &ep->epic_descriptor.Supports; | |
984f6868 GKH |
603 | dev_dbg(dev, "**EPIC descriptor:\n"); |
604 | dev_dbg(dev, " VendEnableSuspend: %s\n", bits->VendEnableSuspend ? "TRUE": "FALSE"); | |
605 | dev_dbg(dev, " IOSPOpen : %s\n", bits->IOSPOpen ? "TRUE": "FALSE"); | |
606 | dev_dbg(dev, " IOSPClose : %s\n", bits->IOSPClose ? "TRUE": "FALSE"); | |
607 | dev_dbg(dev, " IOSPChase : %s\n", bits->IOSPChase ? "TRUE": "FALSE"); | |
608 | dev_dbg(dev, " IOSPSetRxFlow : %s\n", bits->IOSPSetRxFlow ? "TRUE": "FALSE"); | |
609 | dev_dbg(dev, " IOSPSetTxFlow : %s\n", bits->IOSPSetTxFlow ? "TRUE": "FALSE"); | |
610 | dev_dbg(dev, " IOSPSetXChar : %s\n", bits->IOSPSetXChar ? "TRUE": "FALSE"); | |
611 | dev_dbg(dev, " IOSPRxCheck : %s\n", bits->IOSPRxCheck ? "TRUE": "FALSE"); | |
612 | dev_dbg(dev, " IOSPSetClrBreak : %s\n", bits->IOSPSetClrBreak ? "TRUE": "FALSE"); | |
613 | dev_dbg(dev, " IOSPWriteMCR : %s\n", bits->IOSPWriteMCR ? "TRUE": "FALSE"); | |
614 | dev_dbg(dev, " IOSPWriteLCR : %s\n", bits->IOSPWriteLCR ? "TRUE": "FALSE"); | |
615 | dev_dbg(dev, " IOSPSetBaudRate : %s\n", bits->IOSPSetBaudRate ? "TRUE": "FALSE"); | |
616 | dev_dbg(dev, " TrueEdgeport : %s\n", bits->TrueEdgeport ? "TRUE": "FALSE"); | |
e4457d97 JH |
617 | |
618 | result = 0; | |
619 | } else if (result >= 0) { | |
620 | dev_warn(&serial->interface->dev, "short epic descriptor received: %d\n", | |
621 | result); | |
622 | result = -EIO; | |
6e8cf775 GKH |
623 | } |
624 | ||
e4457d97 JH |
625 | kfree(epic); |
626 | ||
6e8cf775 | 627 | return result; |
1da177e4 LT |
628 | } |
629 | ||
630 | ||
631 | /************************************************************************/ | |
632 | /************************************************************************/ | |
633 | /* U S B C A L L B A C K F U N C T I O N S */ | |
634 | /* U S B C A L L B A C K F U N C T I O N S */ | |
635 | /************************************************************************/ | |
636 | /************************************************************************/ | |
637 | ||
638 | /***************************************************************************** | |
639 | * edge_interrupt_callback | |
03f0dbf7 | 640 | * this is the callback function for when we have received data on the |
1da177e4 LT |
641 | * interrupt endpoint. |
642 | *****************************************************************************/ | |
03f0dbf7 | 643 | static void edge_interrupt_callback(struct urb *urb) |
1da177e4 | 644 | { |
984f6868 GKH |
645 | struct edgeport_serial *edge_serial = urb->context; |
646 | struct device *dev; | |
1da177e4 LT |
647 | struct edgeport_port *edge_port; |
648 | struct usb_serial_port *port; | |
649 | unsigned char *data = urb->transfer_buffer; | |
650 | int length = urb->actual_length; | |
d95df1eb | 651 | unsigned long flags; |
1da177e4 LT |
652 | int bytes_avail; |
653 | int position; | |
654 | int txCredits; | |
655 | int portNumber; | |
656 | int result; | |
2a393f5f | 657 | int status = urb->status; |
1da177e4 | 658 | |
2a393f5f | 659 | switch (status) { |
1da177e4 LT |
660 | case 0: |
661 | /* success */ | |
662 | break; | |
663 | case -ECONNRESET: | |
664 | case -ENOENT: | |
665 | case -ESHUTDOWN: | |
666 | /* this urb is terminated, clean up */ | |
984f6868 | 667 | dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n", __func__, status); |
1da177e4 LT |
668 | return; |
669 | default: | |
984f6868 | 670 | dev_dbg(&urb->dev->dev, "%s - nonzero urb status received: %d\n", __func__, status); |
1da177e4 LT |
671 | goto exit; |
672 | } | |
673 | ||
984f6868 GKH |
674 | dev = &edge_serial->serial->dev->dev; |
675 | ||
03f0dbf7 | 676 | /* process this interrupt-read even if there are no ports open */ |
1da177e4 | 677 | if (length) { |
59d33f2f | 678 | usb_serial_debug_data(dev, __func__, length, data); |
1da177e4 LT |
679 | |
680 | if (length > 1) { | |
681 | bytes_avail = data[0] | (data[1] << 8); | |
682 | if (bytes_avail) { | |
d95df1eb | 683 | spin_lock_irqsave(&edge_serial->es_lock, flags); |
1da177e4 | 684 | edge_serial->rxBytesAvail += bytes_avail; |
984f6868 GKH |
685 | dev_dbg(dev, |
686 | "%s - bytes_avail=%d, rxBytesAvail=%d, read_in_progress=%d\n", | |
687 | __func__, bytes_avail, | |
688 | edge_serial->rxBytesAvail, | |
689 | edge_serial->read_in_progress); | |
1da177e4 LT |
690 | |
691 | if (edge_serial->rxBytesAvail > 0 && | |
692 | !edge_serial->read_in_progress) { | |
984f6868 | 693 | dev_dbg(dev, "%s - posting a read\n", __func__); |
cb8eaa8b | 694 | edge_serial->read_in_progress = true; |
1da177e4 | 695 | |
03f0dbf7 AC |
696 | /* we have pending bytes on the |
697 | bulk in pipe, send a request */ | |
1da177e4 LT |
698 | result = usb_submit_urb(edge_serial->read_urb, GFP_ATOMIC); |
699 | if (result) { | |
984f6868 GKH |
700 | dev_err(dev, |
701 | "%s - usb_submit_urb(read bulk) failed with result = %d\n", | |
702 | __func__, result); | |
cb8eaa8b | 703 | edge_serial->read_in_progress = false; |
1da177e4 LT |
704 | } |
705 | } | |
d95df1eb JO |
706 | spin_unlock_irqrestore(&edge_serial->es_lock, |
707 | flags); | |
1da177e4 LT |
708 | } |
709 | } | |
710 | /* grab the txcredits for the ports if available */ | |
711 | position = 2; | |
712 | portNumber = 0; | |
03f0dbf7 AC |
713 | while ((position < length) && |
714 | (portNumber < edge_serial->serial->num_ports)) { | |
1da177e4 LT |
715 | txCredits = data[position] | (data[position+1] << 8); |
716 | if (txCredits) { | |
717 | port = edge_serial->serial->port[portNumber]; | |
718 | edge_port = usb_get_serial_port_data(port); | |
a868ee19 | 719 | if (edge_port && edge_port->open) { |
d95df1eb JO |
720 | spin_lock_irqsave(&edge_port->ep_lock, |
721 | flags); | |
1da177e4 | 722 | edge_port->txCredits += txCredits; |
d95df1eb JO |
723 | spin_unlock_irqrestore(&edge_port->ep_lock, |
724 | flags); | |
984f6868 GKH |
725 | dev_dbg(dev, "%s - txcredits for port%d = %d\n", |
726 | __func__, portNumber, | |
727 | edge_port->txCredits); | |
1da177e4 | 728 | |
03f0dbf7 AC |
729 | /* tell the tty driver that something |
730 | has changed */ | |
6aad04f2 | 731 | tty_port_tty_wakeup(&edge_port->port->port); |
03f0dbf7 AC |
732 | /* Since we have more credit, check |
733 | if more data can be sent */ | |
734 | send_more_port_data(edge_serial, | |
735 | edge_port); | |
1da177e4 LT |
736 | } |
737 | } | |
738 | position += 2; | |
739 | ++portNumber; | |
740 | } | |
741 | } | |
742 | ||
743 | exit: | |
03f0dbf7 AC |
744 | result = usb_submit_urb(urb, GFP_ATOMIC); |
745 | if (result) | |
746 | dev_err(&urb->dev->dev, | |
747 | "%s - Error %d submitting control urb\n", | |
748 | __func__, result); | |
1da177e4 LT |
749 | } |
750 | ||
751 | ||
752 | /***************************************************************************** | |
753 | * edge_bulk_in_callback | |
03f0dbf7 | 754 | * this is the callback function for when we have received data on the |
1da177e4 LT |
755 | * bulk in endpoint. |
756 | *****************************************************************************/ | |
03f0dbf7 | 757 | static void edge_bulk_in_callback(struct urb *urb) |
1da177e4 | 758 | { |
cdc97792 | 759 | struct edgeport_serial *edge_serial = urb->context; |
984f6868 | 760 | struct device *dev; |
1da177e4 | 761 | unsigned char *data = urb->transfer_buffer; |
2a393f5f | 762 | int retval; |
1da177e4 | 763 | __u16 raw_data_length; |
2a393f5f | 764 | int status = urb->status; |
d95df1eb | 765 | unsigned long flags; |
1da177e4 | 766 | |
2a393f5f | 767 | if (status) { |
984f6868 GKH |
768 | dev_dbg(&urb->dev->dev, "%s - nonzero read bulk status received: %d\n", |
769 | __func__, status); | |
cb8eaa8b | 770 | edge_serial->read_in_progress = false; |
1da177e4 LT |
771 | return; |
772 | } | |
773 | ||
774 | if (urb->actual_length == 0) { | |
984f6868 | 775 | dev_dbg(&urb->dev->dev, "%s - read bulk callback with no data\n", __func__); |
cb8eaa8b | 776 | edge_serial->read_in_progress = false; |
1da177e4 LT |
777 | return; |
778 | } | |
779 | ||
984f6868 | 780 | dev = &edge_serial->serial->dev->dev; |
1da177e4 LT |
781 | raw_data_length = urb->actual_length; |
782 | ||
59d33f2f | 783 | usb_serial_debug_data(dev, __func__, raw_data_length, data); |
1da177e4 | 784 | |
d95df1eb | 785 | spin_lock_irqsave(&edge_serial->es_lock, flags); |
1da177e4 LT |
786 | |
787 | /* decrement our rxBytes available by the number that we just got */ | |
788 | edge_serial->rxBytesAvail -= raw_data_length; | |
789 | ||
984f6868 GKH |
790 | dev_dbg(dev, "%s - Received = %d, rxBytesAvail %d\n", __func__, |
791 | raw_data_length, edge_serial->rxBytesAvail); | |
1da177e4 | 792 | |
03f0dbf7 | 793 | process_rcvd_data(edge_serial, data, urb->actual_length); |
1da177e4 LT |
794 | |
795 | /* check to see if there's any more data for us to read */ | |
796 | if (edge_serial->rxBytesAvail > 0) { | |
984f6868 | 797 | dev_dbg(dev, "%s - posting a read\n", __func__); |
2a393f5f GKH |
798 | retval = usb_submit_urb(edge_serial->read_urb, GFP_ATOMIC); |
799 | if (retval) { | |
984f6868 GKH |
800 | dev_err(dev, |
801 | "%s - usb_submit_urb(read bulk) failed, retval = %d\n", | |
802 | __func__, retval); | |
cb8eaa8b | 803 | edge_serial->read_in_progress = false; |
1da177e4 LT |
804 | } |
805 | } else { | |
cb8eaa8b | 806 | edge_serial->read_in_progress = false; |
1da177e4 LT |
807 | } |
808 | ||
d95df1eb | 809 | spin_unlock_irqrestore(&edge_serial->es_lock, flags); |
1da177e4 LT |
810 | } |
811 | ||
812 | ||
813 | /***************************************************************************** | |
814 | * edge_bulk_out_data_callback | |
03f0dbf7 AC |
815 | * this is the callback function for when we have finished sending |
816 | * serial data on the bulk out endpoint. | |
1da177e4 | 817 | *****************************************************************************/ |
03f0dbf7 | 818 | static void edge_bulk_out_data_callback(struct urb *urb) |
1da177e4 | 819 | { |
cdc97792 | 820 | struct edgeport_port *edge_port = urb->context; |
2a393f5f | 821 | int status = urb->status; |
1da177e4 | 822 | |
2a393f5f | 823 | if (status) { |
984f6868 GKH |
824 | dev_dbg(&urb->dev->dev, |
825 | "%s - nonzero write bulk status received: %d\n", | |
826 | __func__, status); | |
1da177e4 LT |
827 | } |
828 | ||
6aad04f2 JS |
829 | if (edge_port->open) |
830 | tty_port_tty_wakeup(&edge_port->port->port); | |
1da177e4 | 831 | |
03f0dbf7 | 832 | /* Release the Write URB */ |
cb8eaa8b | 833 | edge_port->write_in_progress = false; |
1da177e4 | 834 | |
03f0dbf7 AC |
835 | /* Check if more data needs to be sent */ |
836 | send_more_port_data((struct edgeport_serial *) | |
837 | (usb_get_serial_data(edge_port->port->serial)), edge_port); | |
1da177e4 LT |
838 | } |
839 | ||
840 | ||
841 | /***************************************************************************** | |
842 | * BulkOutCmdCallback | |
03f0dbf7 AC |
843 | * this is the callback function for when we have finished sending a |
844 | * command on the bulk out endpoint. | |
1da177e4 | 845 | *****************************************************************************/ |
03f0dbf7 | 846 | static void edge_bulk_out_cmd_callback(struct urb *urb) |
1da177e4 | 847 | { |
cdc97792 | 848 | struct edgeport_port *edge_port = urb->context; |
1da177e4 LT |
849 | int status = urb->status; |
850 | ||
96c706ed | 851 | atomic_dec(&CmdUrbs); |
984f6868 GKH |
852 | dev_dbg(&urb->dev->dev, "%s - FREE URB %p (outstanding %d)\n", |
853 | __func__, urb, atomic_read(&CmdUrbs)); | |
1da177e4 LT |
854 | |
855 | ||
856 | /* clean up the transfer buffer */ | |
1bc3c9e1 | 857 | kfree(urb->transfer_buffer); |
1da177e4 LT |
858 | |
859 | /* Free the command urb */ | |
03f0dbf7 | 860 | usb_free_urb(urb); |
1da177e4 LT |
861 | |
862 | if (status) { | |
984f6868 GKH |
863 | dev_dbg(&urb->dev->dev, |
864 | "%s - nonzero write bulk status received: %d\n", | |
865 | __func__, status); | |
1da177e4 LT |
866 | return; |
867 | } | |
868 | ||
1da177e4 | 869 | /* tell the tty driver that something has changed */ |
6aad04f2 JS |
870 | if (edge_port->open) |
871 | tty_port_tty_wakeup(&edge_port->port->port); | |
1da177e4 LT |
872 | |
873 | /* we have completed the command */ | |
cb8eaa8b | 874 | edge_port->commandPending = false; |
1da177e4 LT |
875 | wake_up(&edge_port->wait_command); |
876 | } | |
877 | ||
878 | ||
879 | /***************************************************************************** | |
880 | * Driver tty interface functions | |
881 | *****************************************************************************/ | |
882 | ||
883 | /***************************************************************************** | |
884 | * SerialOpen | |
885 | * this function is called by the tty driver when a port is opened | |
886 | * If successful, we return 0 | |
887 | * Otherwise we return a negative error number. | |
888 | *****************************************************************************/ | |
a509a7e4 | 889 | static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) |
1da177e4 LT |
890 | { |
891 | struct edgeport_port *edge_port = usb_get_serial_port_data(port); | |
984f6868 | 892 | struct device *dev = &port->dev; |
1da177e4 LT |
893 | struct usb_serial *serial; |
894 | struct edgeport_serial *edge_serial; | |
895 | int response; | |
896 | ||
1da177e4 LT |
897 | if (edge_port == NULL) |
898 | return -ENODEV; | |
899 | ||
03f0dbf7 AC |
900 | /* see if we've set up our endpoint info yet (can't set it up |
901 | in edge_startup as the structures were not set up at that time.) */ | |
1da177e4 LT |
902 | serial = port->serial; |
903 | edge_serial = usb_get_serial_data(serial); | |
95da310e | 904 | if (edge_serial == NULL) |
1da177e4 | 905 | return -ENODEV; |
1da177e4 LT |
906 | if (edge_serial->interrupt_in_buffer == NULL) { |
907 | struct usb_serial_port *port0 = serial->port[0]; | |
03f0dbf7 | 908 | |
1da177e4 | 909 | /* not set up yet, so do it now */ |
03f0dbf7 AC |
910 | edge_serial->interrupt_in_buffer = |
911 | port0->interrupt_in_buffer; | |
912 | edge_serial->interrupt_in_endpoint = | |
913 | port0->interrupt_in_endpointAddress; | |
1da177e4 LT |
914 | edge_serial->interrupt_read_urb = port0->interrupt_in_urb; |
915 | edge_serial->bulk_in_buffer = port0->bulk_in_buffer; | |
03f0dbf7 AC |
916 | edge_serial->bulk_in_endpoint = |
917 | port0->bulk_in_endpointAddress; | |
1da177e4 | 918 | edge_serial->read_urb = port0->read_urb; |
03f0dbf7 AC |
919 | edge_serial->bulk_out_endpoint = |
920 | port0->bulk_out_endpointAddress; | |
921 | ||
1da177e4 LT |
922 | /* set up our interrupt urb */ |
923 | usb_fill_int_urb(edge_serial->interrupt_read_urb, | |
03f0dbf7 AC |
924 | serial->dev, |
925 | usb_rcvintpipe(serial->dev, | |
926 | port0->interrupt_in_endpointAddress), | |
927 | port0->interrupt_in_buffer, | |
928 | edge_serial->interrupt_read_urb->transfer_buffer_length, | |
929 | edge_interrupt_callback, edge_serial, | |
930 | edge_serial->interrupt_read_urb->interval); | |
931 | ||
1da177e4 LT |
932 | /* set up our bulk in urb */ |
933 | usb_fill_bulk_urb(edge_serial->read_urb, serial->dev, | |
03f0dbf7 AC |
934 | usb_rcvbulkpipe(serial->dev, |
935 | port0->bulk_in_endpointAddress), | |
936 | port0->bulk_in_buffer, | |
937 | edge_serial->read_urb->transfer_buffer_length, | |
938 | edge_bulk_in_callback, edge_serial); | |
cb8eaa8b | 939 | edge_serial->read_in_progress = false; |
1da177e4 LT |
940 | |
941 | /* start interrupt read for this edgeport | |
03f0dbf7 AC |
942 | * this interrupt will continue as long |
943 | * as the edgeport is connected */ | |
944 | response = usb_submit_urb(edge_serial->interrupt_read_urb, | |
945 | GFP_KERNEL); | |
1da177e4 | 946 | if (response) { |
984f6868 GKH |
947 | dev_err(dev, "%s - Error %d submitting control urb\n", |
948 | __func__, response); | |
1da177e4 LT |
949 | } |
950 | } | |
03f0dbf7 | 951 | |
1da177e4 LT |
952 | /* initialize our wait queues */ |
953 | init_waitqueue_head(&edge_port->wait_open); | |
954 | init_waitqueue_head(&edge_port->wait_chase); | |
1da177e4 LT |
955 | init_waitqueue_head(&edge_port->wait_command); |
956 | ||
1da177e4 | 957 | /* initialize our port settings */ |
03f0dbf7 AC |
958 | edge_port->txCredits = 0; /* Can't send any data yet */ |
959 | /* Must always set this bit to enable ints! */ | |
960 | edge_port->shadowMCR = MCR_MASTER_IE; | |
cb8eaa8b | 961 | edge_port->chaseResponsePending = false; |
1da177e4 LT |
962 | |
963 | /* send a open port command */ | |
cb8eaa8b RK |
964 | edge_port->openPending = true; |
965 | edge_port->open = false; | |
03f0dbf7 | 966 | response = send_iosp_ext_cmd(edge_port, IOSP_CMD_OPEN_PORT, 0); |
1da177e4 LT |
967 | |
968 | if (response < 0) { | |
984f6868 | 969 | dev_err(dev, "%s - error sending open port command\n", __func__); |
cb8eaa8b | 970 | edge_port->openPending = false; |
1da177e4 LT |
971 | return -ENODEV; |
972 | } | |
973 | ||
974 | /* now wait for the port to be completely opened */ | |
03f0dbf7 AC |
975 | wait_event_timeout(edge_port->wait_open, !edge_port->openPending, |
976 | OPEN_TIMEOUT); | |
1da177e4 | 977 | |
cb8eaa8b | 978 | if (!edge_port->open) { |
1da177e4 | 979 | /* open timed out */ |
984f6868 | 980 | dev_dbg(dev, "%s - open timedout\n", __func__); |
cb8eaa8b | 981 | edge_port->openPending = false; |
1da177e4 LT |
982 | return -ENODEV; |
983 | } | |
984 | ||
985 | /* create the txfifo */ | |
986 | edge_port->txfifo.head = 0; | |
987 | edge_port->txfifo.tail = 0; | |
988 | edge_port->txfifo.count = 0; | |
989 | edge_port->txfifo.size = edge_port->maxTxCredits; | |
03f0dbf7 | 990 | edge_port->txfifo.fifo = kmalloc(edge_port->maxTxCredits, GFP_KERNEL); |
1da177e4 LT |
991 | |
992 | if (!edge_port->txfifo.fifo) { | |
335f8514 | 993 | edge_close(port); |
1da177e4 LT |
994 | return -ENOMEM; |
995 | } | |
996 | ||
997 | /* Allocate a URB for the write */ | |
03f0dbf7 | 998 | edge_port->write_urb = usb_alloc_urb(0, GFP_KERNEL); |
cb8eaa8b | 999 | edge_port->write_in_progress = false; |
1da177e4 LT |
1000 | |
1001 | if (!edge_port->write_urb) { | |
335f8514 | 1002 | edge_close(port); |
1da177e4 LT |
1003 | return -ENOMEM; |
1004 | } | |
1005 | ||
1143832e GKH |
1006 | dev_dbg(dev, "%s - Initialize TX fifo to %d bytes\n", |
1007 | __func__, edge_port->maxTxCredits); | |
1da177e4 LT |
1008 | |
1009 | return 0; | |
1010 | } | |
1011 | ||
1012 | ||
1013 | /************************************************************************ | |
1014 | * | |
1015 | * block_until_chase_response | |
1016 | * | |
1017 | * This function will block the close until one of the following: | |
1018 | * 1. Response to our Chase comes from Edgeport | |
dc0d5c1e | 1019 | * 2. A timeout of 10 seconds without activity has expired |
1da177e4 LT |
1020 | * (1K of Edgeport data @ 2400 baud ==> 4 sec to empty) |
1021 | * | |
1022 | ************************************************************************/ | |
1023 | static void block_until_chase_response(struct edgeport_port *edge_port) | |
1024 | { | |
984f6868 | 1025 | struct device *dev = &edge_port->port->dev; |
1da177e4 LT |
1026 | DEFINE_WAIT(wait); |
1027 | __u16 lastCredits; | |
1028 | int timeout = 1*HZ; | |
1029 | int loop = 10; | |
1030 | ||
1031 | while (1) { | |
03f0dbf7 | 1032 | /* Save Last credits */ |
1da177e4 LT |
1033 | lastCredits = edge_port->txCredits; |
1034 | ||
03f0dbf7 | 1035 | /* Did we get our Chase response */ |
cb8eaa8b | 1036 | if (!edge_port->chaseResponsePending) { |
984f6868 | 1037 | dev_dbg(dev, "%s - Got Chase Response\n", __func__); |
1da177e4 | 1038 | |
03f0dbf7 AC |
1039 | /* did we get all of our credit back? */ |
1040 | if (edge_port->txCredits == edge_port->maxTxCredits) { | |
984f6868 | 1041 | dev_dbg(dev, "%s - Got all credits\n", __func__); |
1da177e4 LT |
1042 | return; |
1043 | } | |
1044 | } | |
1045 | ||
03f0dbf7 AC |
1046 | /* Block the thread for a while */ |
1047 | prepare_to_wait(&edge_port->wait_chase, &wait, | |
1048 | TASK_UNINTERRUPTIBLE); | |
1da177e4 LT |
1049 | schedule_timeout(timeout); |
1050 | finish_wait(&edge_port->wait_chase, &wait); | |
1051 | ||
1052 | if (lastCredits == edge_port->txCredits) { | |
03f0dbf7 | 1053 | /* No activity.. count down. */ |
1da177e4 LT |
1054 | loop--; |
1055 | if (loop == 0) { | |
cb8eaa8b | 1056 | edge_port->chaseResponsePending = false; |
984f6868 | 1057 | dev_dbg(dev, "%s - Chase TIMEOUT\n", __func__); |
1da177e4 LT |
1058 | return; |
1059 | } | |
1060 | } else { | |
03f0dbf7 | 1061 | /* Reset timeout value back to 10 seconds */ |
984f6868 | 1062 | dev_dbg(dev, "%s - Last %d, Current %d\n", __func__, |
03f0dbf7 | 1063 | lastCredits, edge_port->txCredits); |
1da177e4 LT |
1064 | loop = 10; |
1065 | } | |
1066 | } | |
1067 | } | |
1068 | ||
1069 | ||
1070 | /************************************************************************ | |
1071 | * | |
1072 | * block_until_tx_empty | |
1073 | * | |
1074 | * This function will block the close until one of the following: | |
1075 | * 1. TX count are 0 | |
1076 | * 2. The edgeport has stopped | |
dc0d5c1e | 1077 | * 3. A timeout of 3 seconds without activity has expired |
1da177e4 LT |
1078 | * |
1079 | ************************************************************************/ | |
03f0dbf7 | 1080 | static void block_until_tx_empty(struct edgeport_port *edge_port) |
1da177e4 | 1081 | { |
984f6868 | 1082 | struct device *dev = &edge_port->port->dev; |
1da177e4 LT |
1083 | DEFINE_WAIT(wait); |
1084 | struct TxFifo *fifo = &edge_port->txfifo; | |
1085 | __u32 lastCount; | |
1086 | int timeout = HZ/10; | |
1087 | int loop = 30; | |
1088 | ||
1089 | while (1) { | |
03f0dbf7 | 1090 | /* Save Last count */ |
1da177e4 LT |
1091 | lastCount = fifo->count; |
1092 | ||
03f0dbf7 | 1093 | /* Is the Edgeport Buffer empty? */ |
1da177e4 | 1094 | if (lastCount == 0) { |
984f6868 | 1095 | dev_dbg(dev, "%s - TX Buffer Empty\n", __func__); |
1da177e4 LT |
1096 | return; |
1097 | } | |
1098 | ||
03f0dbf7 AC |
1099 | /* Block the thread for a while */ |
1100 | prepare_to_wait(&edge_port->wait_chase, &wait, | |
1101 | TASK_UNINTERRUPTIBLE); | |
1da177e4 LT |
1102 | schedule_timeout(timeout); |
1103 | finish_wait(&edge_port->wait_chase, &wait); | |
1104 | ||
984f6868 | 1105 | dev_dbg(dev, "%s wait\n", __func__); |
1da177e4 LT |
1106 | |
1107 | if (lastCount == fifo->count) { | |
03f0dbf7 | 1108 | /* No activity.. count down. */ |
1da177e4 LT |
1109 | loop--; |
1110 | if (loop == 0) { | |
984f6868 | 1111 | dev_dbg(dev, "%s - TIMEOUT\n", __func__); |
1da177e4 LT |
1112 | return; |
1113 | } | |
1114 | } else { | |
03f0dbf7 | 1115 | /* Reset timeout value back to seconds */ |
1da177e4 LT |
1116 | loop = 30; |
1117 | } | |
1118 | } | |
1119 | } | |
1120 | ||
1121 | ||
1122 | /***************************************************************************** | |
1123 | * edge_close | |
1124 | * this function is called by the tty driver when a port is closed | |
1125 | *****************************************************************************/ | |
335f8514 | 1126 | static void edge_close(struct usb_serial_port *port) |
1da177e4 LT |
1127 | { |
1128 | struct edgeport_serial *edge_serial; | |
1129 | struct edgeport_port *edge_port; | |
1130 | int status; | |
1131 | ||
1da177e4 LT |
1132 | edge_serial = usb_get_serial_data(port->serial); |
1133 | edge_port = usb_get_serial_port_data(port); | |
03f0dbf7 | 1134 | if (edge_serial == NULL || edge_port == NULL) |
1da177e4 | 1135 | return; |
03f0dbf7 AC |
1136 | |
1137 | /* block until tx is empty */ | |
1da177e4 LT |
1138 | block_until_tx_empty(edge_port); |
1139 | ||
cb8eaa8b | 1140 | edge_port->closePending = true; |
1da177e4 | 1141 | |
232dce89 GB |
1142 | if (!edge_serial->is_epic || |
1143 | edge_serial->epic_descriptor.Supports.IOSPChase) { | |
6e8cf775 | 1144 | /* flush and chase */ |
cb8eaa8b | 1145 | edge_port->chaseResponsePending = true; |
6e8cf775 | 1146 | |
984f6868 | 1147 | dev_dbg(&port->dev, "%s - Sending IOSP_CMD_CHASE_PORT\n", __func__); |
03f0dbf7 AC |
1148 | status = send_iosp_ext_cmd(edge_port, IOSP_CMD_CHASE_PORT, 0); |
1149 | if (status == 0) | |
1150 | /* block until chase finished */ | |
6e8cf775 | 1151 | block_until_chase_response(edge_port); |
03f0dbf7 | 1152 | else |
cb8eaa8b | 1153 | edge_port->chaseResponsePending = false; |
1da177e4 LT |
1154 | } |
1155 | ||
232dce89 GB |
1156 | if (!edge_serial->is_epic || |
1157 | edge_serial->epic_descriptor.Supports.IOSPClose) { | |
6e8cf775 | 1158 | /* close the port */ |
984f6868 | 1159 | dev_dbg(&port->dev, "%s - Sending IOSP_CMD_CLOSE_PORT\n", __func__); |
03f0dbf7 | 1160 | send_iosp_ext_cmd(edge_port, IOSP_CMD_CLOSE_PORT, 0); |
6e8cf775 | 1161 | } |
1da177e4 | 1162 | |
03f0dbf7 | 1163 | /* port->close = true; */ |
cb8eaa8b RK |
1164 | edge_port->closePending = false; |
1165 | edge_port->open = false; | |
1166 | edge_port->openPending = false; | |
1da177e4 | 1167 | |
9a25f44f | 1168 | usb_kill_urb(edge_port->write_urb); |
1da177e4 LT |
1169 | |
1170 | if (edge_port->write_urb) { | |
03f0dbf7 AC |
1171 | /* if this urb had a transfer buffer already |
1172 | (old transfer) free it */ | |
1bc3c9e1 JJ |
1173 | kfree(edge_port->write_urb->transfer_buffer); |
1174 | usb_free_urb(edge_port->write_urb); | |
1da177e4 LT |
1175 | edge_port->write_urb = NULL; |
1176 | } | |
1bc3c9e1 JJ |
1177 | kfree(edge_port->txfifo.fifo); |
1178 | edge_port->txfifo.fifo = NULL; | |
03f0dbf7 | 1179 | } |
1da177e4 LT |
1180 | |
1181 | /***************************************************************************** | |
1182 | * SerialWrite | |
03f0dbf7 AC |
1183 | * this function is called by the tty driver when data should be written |
1184 | * to the port. | |
1185 | * If successful, we return the number of bytes written, otherwise we | |
1186 | * return a negative error number. | |
1da177e4 | 1187 | *****************************************************************************/ |
95da310e AC |
1188 | static int edge_write(struct tty_struct *tty, struct usb_serial_port *port, |
1189 | const unsigned char *data, int count) | |
1da177e4 LT |
1190 | { |
1191 | struct edgeport_port *edge_port = usb_get_serial_port_data(port); | |
1192 | struct TxFifo *fifo; | |
1193 | int copySize; | |
1194 | int bytesleft; | |
1195 | int firsthalf; | |
1196 | int secondhalf; | |
1197 | unsigned long flags; | |
1198 | ||
1da177e4 LT |
1199 | if (edge_port == NULL) |
1200 | return -ENODEV; | |
1201 | ||
03f0dbf7 | 1202 | /* get a pointer to the Tx fifo */ |
1da177e4 LT |
1203 | fifo = &edge_port->txfifo; |
1204 | ||
1205 | spin_lock_irqsave(&edge_port->ep_lock, flags); | |
1206 | ||
03f0dbf7 AC |
1207 | /* calculate number of bytes to put in fifo */ |
1208 | copySize = min((unsigned int)count, | |
1209 | (edge_port->txCredits - fifo->count)); | |
1da177e4 | 1210 | |
1143832e GKH |
1211 | dev_dbg(&port->dev, "%s of %d byte(s) Fifo room %d -- will copy %d bytes\n", |
1212 | __func__, count, edge_port->txCredits - fifo->count, copySize); | |
1da177e4 | 1213 | |
03f0dbf7 AC |
1214 | /* catch writes of 0 bytes which the tty driver likes to give us, |
1215 | and when txCredits is empty */ | |
1da177e4 | 1216 | if (copySize == 0) { |
984f6868 | 1217 | dev_dbg(&port->dev, "%s - copySize = Zero\n", __func__); |
1da177e4 LT |
1218 | goto finish_write; |
1219 | } | |
1220 | ||
03f0dbf7 AC |
1221 | /* queue the data |
1222 | * since we can never overflow the buffer we do not have to check for a | |
1223 | * full condition | |
1224 | * | |
1225 | * the copy is done is two parts -- first fill to the end of the buffer | |
1226 | * then copy the reset from the start of the buffer | |
1227 | */ | |
1da177e4 | 1228 | bytesleft = fifo->size - fifo->head; |
03f0dbf7 | 1229 | firsthalf = min(bytesleft, copySize); |
984f6868 GKH |
1230 | dev_dbg(&port->dev, "%s - copy %d bytes of %d into fifo \n", __func__, |
1231 | firsthalf, bytesleft); | |
1da177e4 LT |
1232 | |
1233 | /* now copy our data */ | |
1234 | memcpy(&fifo->fifo[fifo->head], data, firsthalf); | |
59d33f2f | 1235 | usb_serial_debug_data(&port->dev, __func__, firsthalf, &fifo->fifo[fifo->head]); |
1da177e4 | 1236 | |
03f0dbf7 | 1237 | /* update the index and size */ |
1da177e4 LT |
1238 | fifo->head += firsthalf; |
1239 | fifo->count += firsthalf; | |
1240 | ||
03f0dbf7 AC |
1241 | /* wrap the index */ |
1242 | if (fifo->head == fifo->size) | |
1da177e4 | 1243 | fifo->head = 0; |
1da177e4 LT |
1244 | |
1245 | secondhalf = copySize-firsthalf; | |
1246 | ||
1247 | if (secondhalf) { | |
984f6868 | 1248 | dev_dbg(&port->dev, "%s - copy rest of data %d\n", __func__, secondhalf); |
1da177e4 | 1249 | memcpy(&fifo->fifo[fifo->head], &data[firsthalf], secondhalf); |
59d33f2f | 1250 | usb_serial_debug_data(&port->dev, __func__, secondhalf, &fifo->fifo[fifo->head]); |
03f0dbf7 | 1251 | /* update the index and size */ |
1da177e4 LT |
1252 | fifo->count += secondhalf; |
1253 | fifo->head += secondhalf; | |
03f0dbf7 AC |
1254 | /* No need to check for wrap since we can not get to end of |
1255 | * the fifo in this part | |
1256 | */ | |
1da177e4 LT |
1257 | } |
1258 | ||
1259 | finish_write: | |
1260 | spin_unlock_irqrestore(&edge_port->ep_lock, flags); | |
1261 | ||
03f0dbf7 AC |
1262 | send_more_port_data((struct edgeport_serial *) |
1263 | usb_get_serial_data(port->serial), edge_port); | |
1da177e4 | 1264 | |
984f6868 GKH |
1265 | dev_dbg(&port->dev, "%s wrote %d byte(s) TxCredits %d, Fifo %d\n", |
1266 | __func__, copySize, edge_port->txCredits, fifo->count); | |
1da177e4 | 1267 | |
03f0dbf7 | 1268 | return copySize; |
1da177e4 LT |
1269 | } |
1270 | ||
1271 | ||
1272 | /************************************************************************ | |
1273 | * | |
1274 | * send_more_port_data() | |
1275 | * | |
1276 | * This routine attempts to write additional UART transmit data | |
1277 | * to a port over the USB bulk pipe. It is called (1) when new | |
1278 | * data has been written to a port's TxBuffer from higher layers | |
1279 | * (2) when the peripheral sends us additional TxCredits indicating | |
1280 | * that it can accept more Tx data for a given port; and (3) when | |
1281 | * a bulk write completes successfully and we want to see if we | |
1282 | * can transmit more. | |
1283 | * | |
1284 | ************************************************************************/ | |
03f0dbf7 AC |
1285 | static void send_more_port_data(struct edgeport_serial *edge_serial, |
1286 | struct edgeport_port *edge_port) | |
1da177e4 LT |
1287 | { |
1288 | struct TxFifo *fifo = &edge_port->txfifo; | |
984f6868 | 1289 | struct device *dev = &edge_port->port->dev; |
1da177e4 LT |
1290 | struct urb *urb; |
1291 | unsigned char *buffer; | |
1292 | int status; | |
1293 | int count; | |
1294 | int bytesleft; | |
1295 | int firsthalf; | |
1296 | int secondhalf; | |
1297 | unsigned long flags; | |
1298 | ||
1da177e4 LT |
1299 | spin_lock_irqsave(&edge_port->ep_lock, flags); |
1300 | ||
1301 | if (edge_port->write_in_progress || | |
1302 | !edge_port->open || | |
1303 | (fifo->count == 0)) { | |
1143832e GKH |
1304 | dev_dbg(dev, "%s EXIT - fifo %d, PendingWrite = %d\n", |
1305 | __func__, fifo->count, edge_port->write_in_progress); | |
1da177e4 LT |
1306 | goto exit_send; |
1307 | } | |
1308 | ||
03f0dbf7 AC |
1309 | /* since the amount of data in the fifo will always fit into the |
1310 | * edgeport buffer we do not need to check the write length | |
1311 | * | |
1312 | * Do we have enough credits for this port to make it worthwhile | |
1313 | * to bother queueing a write. If it's too small, say a few bytes, | |
1314 | * it's better to wait for more credits so we can do a larger write. | |
1315 | */ | |
1316 | if (edge_port->txCredits < EDGE_FW_GET_TX_CREDITS_SEND_THRESHOLD(edge_port->maxTxCredits, EDGE_FW_BULK_MAX_PACKET_SIZE)) { | |
1143832e GKH |
1317 | dev_dbg(dev, "%s Not enough credit - fifo %d TxCredit %d\n", |
1318 | __func__, fifo->count, edge_port->txCredits); | |
1da177e4 LT |
1319 | goto exit_send; |
1320 | } | |
1321 | ||
03f0dbf7 | 1322 | /* lock this write */ |
cb8eaa8b | 1323 | edge_port->write_in_progress = true; |
1da177e4 | 1324 | |
03f0dbf7 | 1325 | /* get a pointer to the write_urb */ |
1da177e4 LT |
1326 | urb = edge_port->write_urb; |
1327 | ||
1bc3c9e1 JJ |
1328 | /* make sure transfer buffer is freed */ |
1329 | kfree(urb->transfer_buffer); | |
1330 | urb->transfer_buffer = NULL; | |
1da177e4 | 1331 | |
03f0dbf7 AC |
1332 | /* build the data header for the buffer and port that we are about |
1333 | to send out */ | |
1da177e4 | 1334 | count = fifo->count; |
03f0dbf7 | 1335 | buffer = kmalloc(count+2, GFP_ATOMIC); |
10c642d0 | 1336 | if (!buffer) { |
cb8eaa8b | 1337 | edge_port->write_in_progress = false; |
1da177e4 LT |
1338 | goto exit_send; |
1339 | } | |
1143832e GKH |
1340 | buffer[0] = IOSP_BUILD_DATA_HDR1(edge_port->port->port_number, count); |
1341 | buffer[1] = IOSP_BUILD_DATA_HDR2(edge_port->port->port_number, count); | |
1da177e4 LT |
1342 | |
1343 | /* now copy our data */ | |
1344 | bytesleft = fifo->size - fifo->tail; | |
03f0dbf7 | 1345 | firsthalf = min(bytesleft, count); |
1da177e4 LT |
1346 | memcpy(&buffer[2], &fifo->fifo[fifo->tail], firsthalf); |
1347 | fifo->tail += firsthalf; | |
1348 | fifo->count -= firsthalf; | |
03f0dbf7 | 1349 | if (fifo->tail == fifo->size) |
1da177e4 | 1350 | fifo->tail = 0; |
1da177e4 LT |
1351 | |
1352 | secondhalf = count-firsthalf; | |
1353 | if (secondhalf) { | |
03f0dbf7 AC |
1354 | memcpy(&buffer[2+firsthalf], &fifo->fifo[fifo->tail], |
1355 | secondhalf); | |
1da177e4 LT |
1356 | fifo->tail += secondhalf; |
1357 | fifo->count -= secondhalf; | |
1358 | } | |
1359 | ||
1360 | if (count) | |
59d33f2f | 1361 | usb_serial_debug_data(&edge_port->port->dev, __func__, count, &buffer[2]); |
1da177e4 LT |
1362 | |
1363 | /* fill up the urb with all of our data and submit it */ | |
03f0dbf7 AC |
1364 | usb_fill_bulk_urb(urb, edge_serial->serial->dev, |
1365 | usb_sndbulkpipe(edge_serial->serial->dev, | |
1366 | edge_serial->bulk_out_endpoint), | |
1367 | buffer, count+2, | |
1368 | edge_bulk_out_data_callback, edge_port); | |
1da177e4 LT |
1369 | |
1370 | /* decrement the number of credits we have by the number we just sent */ | |
1371 | edge_port->txCredits -= count; | |
d36a7712 | 1372 | edge_port->port->icount.tx += count; |
1da177e4 | 1373 | |
1da177e4 LT |
1374 | status = usb_submit_urb(urb, GFP_ATOMIC); |
1375 | if (status) { | |
1376 | /* something went wrong */ | |
22a416c4 | 1377 | dev_err_console(edge_port->port, |
03f0dbf7 AC |
1378 | "%s - usb_submit_urb(write bulk) failed, status = %d, data lost\n", |
1379 | __func__, status); | |
cb8eaa8b | 1380 | edge_port->write_in_progress = false; |
1da177e4 LT |
1381 | |
1382 | /* revert the credits as something bad happened. */ | |
1383 | edge_port->txCredits += count; | |
d36a7712 | 1384 | edge_port->port->icount.tx -= count; |
1da177e4 | 1385 | } |
984f6868 GKH |
1386 | dev_dbg(dev, "%s wrote %d byte(s) TxCredit %d, Fifo %d\n", |
1387 | __func__, count, edge_port->txCredits, fifo->count); | |
1da177e4 LT |
1388 | |
1389 | exit_send: | |
1390 | spin_unlock_irqrestore(&edge_port->ep_lock, flags); | |
1391 | } | |
1392 | ||
1393 | ||
1394 | /***************************************************************************** | |
1395 | * edge_write_room | |
03f0dbf7 AC |
1396 | * this function is called by the tty driver when it wants to know how |
1397 | * many bytes of data we can accept for a specific port. If successful, | |
1398 | * we return the amount of room that we have for this port (the txCredits) | |
1399 | * otherwise we return a negative error number. | |
1da177e4 | 1400 | *****************************************************************************/ |
95da310e | 1401 | static int edge_write_room(struct tty_struct *tty) |
1da177e4 | 1402 | { |
95da310e | 1403 | struct usb_serial_port *port = tty->driver_data; |
1da177e4 LT |
1404 | struct edgeport_port *edge_port = usb_get_serial_port_data(port); |
1405 | int room; | |
1406 | unsigned long flags; | |
1407 | ||
1da177e4 | 1408 | if (edge_port == NULL) |
d76f2f44 | 1409 | return 0; |
cb8eaa8b | 1410 | if (edge_port->closePending) |
d76f2f44 | 1411 | return 0; |
1da177e4 | 1412 | |
1da177e4 | 1413 | if (!edge_port->open) { |
984f6868 | 1414 | dev_dbg(&port->dev, "%s - port not opened\n", __func__); |
d76f2f44 | 1415 | return 0; |
1da177e4 LT |
1416 | } |
1417 | ||
03f0dbf7 | 1418 | /* total of both buffers is still txCredit */ |
1da177e4 LT |
1419 | spin_lock_irqsave(&edge_port->ep_lock, flags); |
1420 | room = edge_port->txCredits - edge_port->txfifo.count; | |
1421 | spin_unlock_irqrestore(&edge_port->ep_lock, flags); | |
1422 | ||
984f6868 | 1423 | dev_dbg(&port->dev, "%s - returns %d\n", __func__, room); |
1da177e4 LT |
1424 | return room; |
1425 | } | |
1426 | ||
1427 | ||
1428 | /***************************************************************************** | |
1429 | * edge_chars_in_buffer | |
03f0dbf7 AC |
1430 | * this function is called by the tty driver when it wants to know how |
1431 | * many bytes of data we currently have outstanding in the port (data that | |
1432 | * has been written, but hasn't made it out the port yet) | |
1433 | * If successful, we return the number of bytes left to be written in the | |
1434 | * system, | |
1da177e4 LT |
1435 | * Otherwise we return a negative error number. |
1436 | *****************************************************************************/ | |
95da310e | 1437 | static int edge_chars_in_buffer(struct tty_struct *tty) |
1da177e4 | 1438 | { |
95da310e | 1439 | struct usb_serial_port *port = tty->driver_data; |
1da177e4 LT |
1440 | struct edgeport_port *edge_port = usb_get_serial_port_data(port); |
1441 | int num_chars; | |
1442 | unsigned long flags; | |
1443 | ||
1da177e4 | 1444 | if (edge_port == NULL) |
d76f2f44 | 1445 | return 0; |
cb8eaa8b | 1446 | if (edge_port->closePending) |
d76f2f44 | 1447 | return 0; |
1da177e4 LT |
1448 | |
1449 | if (!edge_port->open) { | |
984f6868 | 1450 | dev_dbg(&port->dev, "%s - port not opened\n", __func__); |
d76f2f44 | 1451 | return 0; |
1da177e4 LT |
1452 | } |
1453 | ||
1454 | spin_lock_irqsave(&edge_port->ep_lock, flags); | |
03f0dbf7 AC |
1455 | num_chars = edge_port->maxTxCredits - edge_port->txCredits + |
1456 | edge_port->txfifo.count; | |
1da177e4 LT |
1457 | spin_unlock_irqrestore(&edge_port->ep_lock, flags); |
1458 | if (num_chars) { | |
1143832e | 1459 | dev_dbg(&port->dev, "%s - returns %d\n", __func__, num_chars); |
1da177e4 LT |
1460 | } |
1461 | ||
1462 | return num_chars; | |
1463 | } | |
1464 | ||
1465 | ||
1466 | /***************************************************************************** | |
1467 | * SerialThrottle | |
1468 | * this function is called by the tty driver when it wants to stop the data | |
1469 | * being read from the port. | |
1470 | *****************************************************************************/ | |
95da310e | 1471 | static void edge_throttle(struct tty_struct *tty) |
1da177e4 | 1472 | { |
95da310e | 1473 | struct usb_serial_port *port = tty->driver_data; |
1da177e4 | 1474 | struct edgeport_port *edge_port = usb_get_serial_port_data(port); |
1da177e4 LT |
1475 | int status; |
1476 | ||
1da177e4 LT |
1477 | if (edge_port == NULL) |
1478 | return; | |
1479 | ||
1480 | if (!edge_port->open) { | |
984f6868 | 1481 | dev_dbg(&port->dev, "%s - port not opened\n", __func__); |
1da177e4 LT |
1482 | return; |
1483 | } | |
1484 | ||
1da177e4 LT |
1485 | /* if we are implementing XON/XOFF, send the stop character */ |
1486 | if (I_IXOFF(tty)) { | |
1487 | unsigned char stop_char = STOP_CHAR(tty); | |
03f0dbf7 AC |
1488 | status = edge_write(tty, port, &stop_char, 1); |
1489 | if (status <= 0) | |
1da177e4 | 1490 | return; |
1da177e4 LT |
1491 | } |
1492 | ||
1493 | /* if we are implementing RTS/CTS, toggle that line */ | |
9db276f8 | 1494 | if (C_CRTSCTS(tty)) { |
1da177e4 | 1495 | edge_port->shadowMCR &= ~MCR_RTS; |
03f0dbf7 AC |
1496 | status = send_cmd_write_uart_register(edge_port, MCR, |
1497 | edge_port->shadowMCR); | |
1498 | if (status != 0) | |
1da177e4 | 1499 | return; |
1da177e4 | 1500 | } |
1da177e4 LT |
1501 | } |
1502 | ||
1503 | ||
1504 | /***************************************************************************** | |
1505 | * edge_unthrottle | |
03f0dbf7 AC |
1506 | * this function is called by the tty driver when it wants to resume the |
1507 | * data being read from the port (called after SerialThrottle is called) | |
1da177e4 | 1508 | *****************************************************************************/ |
95da310e | 1509 | static void edge_unthrottle(struct tty_struct *tty) |
1da177e4 | 1510 | { |
95da310e | 1511 | struct usb_serial_port *port = tty->driver_data; |
1da177e4 | 1512 | struct edgeport_port *edge_port = usb_get_serial_port_data(port); |
1da177e4 LT |
1513 | int status; |
1514 | ||
1da177e4 LT |
1515 | if (edge_port == NULL) |
1516 | return; | |
1517 | ||
1518 | if (!edge_port->open) { | |
984f6868 | 1519 | dev_dbg(&port->dev, "%s - port not opened\n", __func__); |
1da177e4 LT |
1520 | return; |
1521 | } | |
1522 | ||
1da177e4 LT |
1523 | /* if we are implementing XON/XOFF, send the start character */ |
1524 | if (I_IXOFF(tty)) { | |
1525 | unsigned char start_char = START_CHAR(tty); | |
95da310e AC |
1526 | status = edge_write(tty, port, &start_char, 1); |
1527 | if (status <= 0) | |
1da177e4 | 1528 | return; |
1da177e4 | 1529 | } |
1da177e4 | 1530 | /* if we are implementing RTS/CTS, toggle that line */ |
9db276f8 | 1531 | if (C_CRTSCTS(tty)) { |
1da177e4 | 1532 | edge_port->shadowMCR |= MCR_RTS; |
03f0dbf7 AC |
1533 | send_cmd_write_uart_register(edge_port, MCR, |
1534 | edge_port->shadowMCR); | |
1da177e4 | 1535 | } |
1da177e4 LT |
1536 | } |
1537 | ||
1538 | ||
1539 | /***************************************************************************** | |
1540 | * SerialSetTermios | |
03f0dbf7 AC |
1541 | * this function is called by the tty driver when it wants to change |
1542 | * the termios structure | |
1da177e4 | 1543 | *****************************************************************************/ |
95da310e AC |
1544 | static void edge_set_termios(struct tty_struct *tty, |
1545 | struct usb_serial_port *port, struct ktermios *old_termios) | |
1da177e4 LT |
1546 | { |
1547 | struct edgeport_port *edge_port = usb_get_serial_port_data(port); | |
1da177e4 LT |
1548 | |
1549 | if (edge_port == NULL) | |
1550 | return; | |
1551 | ||
1552 | if (!edge_port->open) { | |
984f6868 | 1553 | dev_dbg(&port->dev, "%s - port not opened\n", __func__); |
1da177e4 LT |
1554 | return; |
1555 | } | |
1556 | ||
1557 | /* change the port settings to the new ones specified */ | |
95da310e | 1558 | change_port_settings(tty, edge_port, old_termios); |
1da177e4 LT |
1559 | } |
1560 | ||
1561 | ||
1562 | /***************************************************************************** | |
1563 | * get_lsr_info - get line status register info | |
1564 | * | |
1565 | * Purpose: Let user call ioctl() to get info when the UART physically | |
1566 | * is emptied. On bus types like RS485, the transmitter must | |
1567 | * release the bus after transmitting. This must be done when | |
1568 | * the transmit shift register is empty, not be done when the | |
1569 | * transmit holding register is empty. This functionality | |
03f0dbf7 | 1570 | * allows an RS485 driver to be written in user space. |
1da177e4 | 1571 | *****************************************************************************/ |
03f0dbf7 AC |
1572 | static int get_lsr_info(struct edgeport_port *edge_port, |
1573 | unsigned int __user *value) | |
1da177e4 LT |
1574 | { |
1575 | unsigned int result = 0; | |
1576 | unsigned long flags; | |
1577 | ||
1578 | spin_lock_irqsave(&edge_port->ep_lock, flags); | |
1579 | if (edge_port->maxTxCredits == edge_port->txCredits && | |
1580 | edge_port->txfifo.count == 0) { | |
984f6868 | 1581 | dev_dbg(&edge_port->port->dev, "%s -- Empty\n", __func__); |
1da177e4 LT |
1582 | result = TIOCSER_TEMT; |
1583 | } | |
1584 | spin_unlock_irqrestore(&edge_port->ep_lock, flags); | |
1585 | ||
1586 | if (copy_to_user(value, &result, sizeof(int))) | |
1587 | return -EFAULT; | |
1588 | return 0; | |
1589 | } | |
1590 | ||
20b9d177 | 1591 | static int edge_tiocmset(struct tty_struct *tty, |
03f0dbf7 | 1592 | unsigned int set, unsigned int clear) |
1da177e4 | 1593 | { |
95da310e | 1594 | struct usb_serial_port *port = tty->driver_data; |
1da177e4 LT |
1595 | struct edgeport_port *edge_port = usb_get_serial_port_data(port); |
1596 | unsigned int mcr; | |
1597 | ||
1da177e4 LT |
1598 | mcr = edge_port->shadowMCR; |
1599 | if (set & TIOCM_RTS) | |
1600 | mcr |= MCR_RTS; | |
1601 | if (set & TIOCM_DTR) | |
1602 | mcr |= MCR_DTR; | |
1603 | if (set & TIOCM_LOOP) | |
1604 | mcr |= MCR_LOOPBACK; | |
1605 | ||
1606 | if (clear & TIOCM_RTS) | |
1607 | mcr &= ~MCR_RTS; | |
1608 | if (clear & TIOCM_DTR) | |
1609 | mcr &= ~MCR_DTR; | |
1610 | if (clear & TIOCM_LOOP) | |
1611 | mcr &= ~MCR_LOOPBACK; | |
1612 | ||
1613 | edge_port->shadowMCR = mcr; | |
1614 | ||
1615 | send_cmd_write_uart_register(edge_port, MCR, edge_port->shadowMCR); | |
1616 | ||
1617 | return 0; | |
1618 | } | |
1619 | ||
60b33c13 | 1620 | static int edge_tiocmget(struct tty_struct *tty) |
1da177e4 | 1621 | { |
95da310e | 1622 | struct usb_serial_port *port = tty->driver_data; |
1da177e4 LT |
1623 | struct edgeport_port *edge_port = usb_get_serial_port_data(port); |
1624 | unsigned int result = 0; | |
1625 | unsigned int msr; | |
1626 | unsigned int mcr; | |
1627 | ||
1da177e4 LT |
1628 | msr = edge_port->shadowMSR; |
1629 | mcr = edge_port->shadowMCR; | |
1630 | result = ((mcr & MCR_DTR) ? TIOCM_DTR: 0) /* 0x002 */ | |
1631 | | ((mcr & MCR_RTS) ? TIOCM_RTS: 0) /* 0x004 */ | |
1632 | | ((msr & EDGEPORT_MSR_CTS) ? TIOCM_CTS: 0) /* 0x020 */ | |
1633 | | ((msr & EDGEPORT_MSR_CD) ? TIOCM_CAR: 0) /* 0x040 */ | |
1634 | | ((msr & EDGEPORT_MSR_RI) ? TIOCM_RI: 0) /* 0x080 */ | |
1635 | | ((msr & EDGEPORT_MSR_DSR) ? TIOCM_DSR: 0); /* 0x100 */ | |
1636 | ||
1da177e4 LT |
1637 | return result; |
1638 | } | |
1639 | ||
03f0dbf7 AC |
1640 | static int get_serial_info(struct edgeport_port *edge_port, |
1641 | struct serial_struct __user *retinfo) | |
1da177e4 LT |
1642 | { |
1643 | struct serial_struct tmp; | |
1644 | ||
1da177e4 LT |
1645 | memset(&tmp, 0, sizeof(tmp)); |
1646 | ||
1647 | tmp.type = PORT_16550A; | |
e5b1e206 | 1648 | tmp.line = edge_port->port->minor; |
1143832e | 1649 | tmp.port = edge_port->port->port_number; |
1da177e4 | 1650 | tmp.irq = 0; |
1da177e4 LT |
1651 | tmp.xmit_fifo_size = edge_port->maxTxCredits; |
1652 | tmp.baud_base = 9600; | |
1653 | tmp.close_delay = 5*HZ; | |
1654 | tmp.closing_wait = 30*HZ; | |
1da177e4 LT |
1655 | |
1656 | if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) | |
1657 | return -EFAULT; | |
1658 | return 0; | |
1659 | } | |
1660 | ||
1661 | ||
1da177e4 LT |
1662 | /***************************************************************************** |
1663 | * SerialIoctl | |
1664 | * this function handles any ioctl calls to the driver | |
1665 | *****************************************************************************/ | |
00a0d0d6 | 1666 | static int edge_ioctl(struct tty_struct *tty, |
95da310e | 1667 | unsigned int cmd, unsigned long arg) |
1da177e4 | 1668 | { |
95da310e | 1669 | struct usb_serial_port *port = tty->driver_data; |
1da177e4 LT |
1670 | DEFINE_WAIT(wait); |
1671 | struct edgeport_port *edge_port = usb_get_serial_port_data(port); | |
1da177e4 | 1672 | |
1da177e4 | 1673 | switch (cmd) { |
03f0dbf7 | 1674 | case TIOCSERGETLSR: |
1143832e | 1675 | dev_dbg(&port->dev, "%s TIOCSERGETLSR\n", __func__); |
03f0dbf7 AC |
1676 | return get_lsr_info(edge_port, (unsigned int __user *) arg); |
1677 | ||
1678 | case TIOCGSERIAL: | |
1143832e | 1679 | dev_dbg(&port->dev, "%s TIOCGSERIAL\n", __func__); |
03f0dbf7 | 1680 | return get_serial_info(edge_port, (struct serial_struct __user *) arg); |
1da177e4 | 1681 | } |
1da177e4 LT |
1682 | return -ENOIOCTLCMD; |
1683 | } | |
1684 | ||
1685 | ||
1686 | /***************************************************************************** | |
1687 | * SerialBreak | |
1688 | * this function sends a break to the port | |
1689 | *****************************************************************************/ | |
03f0dbf7 | 1690 | static void edge_break(struct tty_struct *tty, int break_state) |
1da177e4 | 1691 | { |
95da310e | 1692 | struct usb_serial_port *port = tty->driver_data; |
1da177e4 | 1693 | struct edgeport_port *edge_port = usb_get_serial_port_data(port); |
6e8cf775 | 1694 | struct edgeport_serial *edge_serial = usb_get_serial_data(port->serial); |
1da177e4 LT |
1695 | int status; |
1696 | ||
232dce89 GB |
1697 | if (!edge_serial->is_epic || |
1698 | edge_serial->epic_descriptor.Supports.IOSPChase) { | |
6e8cf775 | 1699 | /* flush and chase */ |
cb8eaa8b | 1700 | edge_port->chaseResponsePending = true; |
6e8cf775 | 1701 | |
984f6868 | 1702 | dev_dbg(&port->dev, "%s - Sending IOSP_CMD_CHASE_PORT\n", __func__); |
03f0dbf7 | 1703 | status = send_iosp_ext_cmd(edge_port, IOSP_CMD_CHASE_PORT, 0); |
6e8cf775 | 1704 | if (status == 0) { |
03f0dbf7 | 1705 | /* block until chase finished */ |
6e8cf775 GKH |
1706 | block_until_chase_response(edge_port); |
1707 | } else { | |
cb8eaa8b | 1708 | edge_port->chaseResponsePending = false; |
6e8cf775 | 1709 | } |
1da177e4 LT |
1710 | } |
1711 | ||
232dce89 GB |
1712 | if (!edge_serial->is_epic || |
1713 | edge_serial->epic_descriptor.Supports.IOSPSetClrBreak) { | |
6e8cf775 | 1714 | if (break_state == -1) { |
984f6868 | 1715 | dev_dbg(&port->dev, "%s - Sending IOSP_CMD_SET_BREAK\n", __func__); |
03f0dbf7 AC |
1716 | status = send_iosp_ext_cmd(edge_port, |
1717 | IOSP_CMD_SET_BREAK, 0); | |
6e8cf775 | 1718 | } else { |
984f6868 | 1719 | dev_dbg(&port->dev, "%s - Sending IOSP_CMD_CLEAR_BREAK\n", __func__); |
03f0dbf7 AC |
1720 | status = send_iosp_ext_cmd(edge_port, |
1721 | IOSP_CMD_CLEAR_BREAK, 0); | |
6e8cf775 | 1722 | } |
03f0dbf7 | 1723 | if (status) |
984f6868 | 1724 | dev_dbg(&port->dev, "%s - error sending break set/clear command.\n", |
03f0dbf7 | 1725 | __func__); |
1da177e4 | 1726 | } |
1da177e4 LT |
1727 | } |
1728 | ||
1729 | ||
1730 | /***************************************************************************** | |
1731 | * process_rcvd_data | |
1732 | * this function handles the data received on the bulk in pipe. | |
1733 | *****************************************************************************/ | |
03f0dbf7 AC |
1734 | static void process_rcvd_data(struct edgeport_serial *edge_serial, |
1735 | unsigned char *buffer, __u16 bufferLength) | |
1da177e4 | 1736 | { |
6b816378 JH |
1737 | struct usb_serial *serial = edge_serial->serial; |
1738 | struct device *dev = &serial->dev->dev; | |
1da177e4 LT |
1739 | struct usb_serial_port *port; |
1740 | struct edgeport_port *edge_port; | |
1da177e4 LT |
1741 | __u16 lastBufferLength; |
1742 | __u16 rxLen; | |
1743 | ||
1da177e4 LT |
1744 | lastBufferLength = bufferLength + 1; |
1745 | ||
1746 | while (bufferLength > 0) { | |
1747 | /* failsafe incase we get a message that we don't understand */ | |
1748 | if (lastBufferLength == bufferLength) { | |
984f6868 | 1749 | dev_dbg(dev, "%s - stuck in loop, exiting it.\n", __func__); |
1da177e4 LT |
1750 | break; |
1751 | } | |
1752 | lastBufferLength = bufferLength; | |
1753 | ||
1754 | switch (edge_serial->rxState) { | |
03f0dbf7 AC |
1755 | case EXPECT_HDR1: |
1756 | edge_serial->rxHeader1 = *buffer; | |
1757 | ++buffer; | |
1758 | --bufferLength; | |
1da177e4 | 1759 | |
03f0dbf7 AC |
1760 | if (bufferLength == 0) { |
1761 | edge_serial->rxState = EXPECT_HDR2; | |
1762 | break; | |
1763 | } | |
1764 | /* otherwise, drop on through */ | |
1765 | case EXPECT_HDR2: | |
1766 | edge_serial->rxHeader2 = *buffer; | |
1767 | ++buffer; | |
1768 | --bufferLength; | |
1769 | ||
984f6868 GKH |
1770 | dev_dbg(dev, "%s - Hdr1=%02X Hdr2=%02X\n", __func__, |
1771 | edge_serial->rxHeader1, edge_serial->rxHeader2); | |
03f0dbf7 AC |
1772 | /* Process depending on whether this header is |
1773 | * data or status */ | |
1774 | ||
1775 | if (IS_CMD_STAT_HDR(edge_serial->rxHeader1)) { | |
1776 | /* Decode this status header and go to | |
1777 | * EXPECT_HDR1 (if we can process the status | |
1778 | * with only 2 bytes), or go to EXPECT_HDR3 to | |
1779 | * get the third byte. */ | |
1780 | edge_serial->rxPort = | |
1781 | IOSP_GET_HDR_PORT(edge_serial->rxHeader1); | |
1782 | edge_serial->rxStatusCode = | |
1783 | IOSP_GET_STATUS_CODE( | |
1784 | edge_serial->rxHeader1); | |
1785 | ||
1786 | if (!IOSP_STATUS_IS_2BYTE( | |
1787 | edge_serial->rxStatusCode)) { | |
1788 | /* This status needs additional bytes. | |
1789 | * Save what we have and then wait for | |
1790 | * more data. | |
1791 | */ | |
1792 | edge_serial->rxStatusParam | |
1793 | = edge_serial->rxHeader2; | |
1794 | edge_serial->rxState = EXPECT_HDR3; | |
1da177e4 LT |
1795 | break; |
1796 | } | |
03f0dbf7 AC |
1797 | /* We have all the header bytes, process the |
1798 | status now */ | |
1799 | process_rcvd_status(edge_serial, | |
1800 | edge_serial->rxHeader2, 0); | |
1801 | edge_serial->rxState = EXPECT_HDR1; | |
1802 | break; | |
1803 | } else { | |
1804 | edge_serial->rxPort = | |
1805 | IOSP_GET_HDR_PORT(edge_serial->rxHeader1); | |
1806 | edge_serial->rxBytesRemaining = | |
1807 | IOSP_GET_HDR_DATA_LEN( | |
1808 | edge_serial->rxHeader1, | |
1809 | edge_serial->rxHeader2); | |
984f6868 GKH |
1810 | dev_dbg(dev, "%s - Data for Port %u Len %u\n", |
1811 | __func__, | |
1812 | edge_serial->rxPort, | |
1813 | edge_serial->rxBytesRemaining); | |
03f0dbf7 AC |
1814 | |
1815 | /* ASSERT(DevExt->RxPort < DevExt->NumPorts); | |
1816 | * ASSERT(DevExt->RxBytesRemaining < | |
1817 | * IOSP_MAX_DATA_LENGTH); | |
1818 | */ | |
1da177e4 | 1819 | |
03f0dbf7 AC |
1820 | if (bufferLength == 0) { |
1821 | edge_serial->rxState = EXPECT_DATA; | |
1da177e4 | 1822 | break; |
1da177e4 | 1823 | } |
03f0dbf7 AC |
1824 | /* Else, drop through */ |
1825 | } | |
1826 | case EXPECT_DATA: /* Expect data */ | |
1827 | if (bufferLength < edge_serial->rxBytesRemaining) { | |
1828 | rxLen = bufferLength; | |
1829 | /* Expect data to start next buffer */ | |
1830 | edge_serial->rxState = EXPECT_DATA; | |
1831 | } else { | |
1832 | /* BufLen >= RxBytesRemaining */ | |
1833 | rxLen = edge_serial->rxBytesRemaining; | |
1834 | /* Start another header next time */ | |
1835 | edge_serial->rxState = EXPECT_HDR1; | |
1836 | } | |
1da177e4 | 1837 | |
03f0dbf7 AC |
1838 | bufferLength -= rxLen; |
1839 | edge_serial->rxBytesRemaining -= rxLen; | |
1da177e4 | 1840 | |
03f0dbf7 AC |
1841 | /* spit this data back into the tty driver if this |
1842 | port is open */ | |
6b816378 JH |
1843 | if (rxLen && edge_serial->rxPort < serial->num_ports) { |
1844 | port = serial->port[edge_serial->rxPort]; | |
03f0dbf7 | 1845 | edge_port = usb_get_serial_port_data(port); |
a868ee19 | 1846 | if (edge_port && edge_port->open) { |
2e124b4a JS |
1847 | dev_dbg(dev, "%s - Sending %d bytes to TTY for port %d\n", |
1848 | __func__, rxLen, | |
1849 | edge_serial->rxPort); | |
1850 | edge_tty_recv(edge_port->port, buffer, | |
1851 | rxLen); | |
d36a7712 | 1852 | edge_port->port->icount.rx += rxLen; |
1da177e4 | 1853 | } |
03f0dbf7 | 1854 | } |
6b816378 | 1855 | buffer += rxLen; |
03f0dbf7 | 1856 | break; |
1da177e4 | 1857 | |
03f0dbf7 AC |
1858 | case EXPECT_HDR3: /* Expect 3rd byte of status header */ |
1859 | edge_serial->rxHeader3 = *buffer; | |
1860 | ++buffer; | |
1861 | --bufferLength; | |
1862 | ||
1863 | /* We have all the header bytes, process the | |
1864 | status now */ | |
1865 | process_rcvd_status(edge_serial, | |
1866 | edge_serial->rxStatusParam, | |
1867 | edge_serial->rxHeader3); | |
1868 | edge_serial->rxState = EXPECT_HDR1; | |
1869 | break; | |
1da177e4 LT |
1870 | } |
1871 | } | |
1872 | } | |
1873 | ||
1874 | ||
1875 | /***************************************************************************** | |
1876 | * process_rcvd_status | |
03f0dbf7 AC |
1877 | * this function handles the any status messages received on the |
1878 | * bulk in pipe. | |
1da177e4 | 1879 | *****************************************************************************/ |
03f0dbf7 AC |
1880 | static void process_rcvd_status(struct edgeport_serial *edge_serial, |
1881 | __u8 byte2, __u8 byte3) | |
1da177e4 LT |
1882 | { |
1883 | struct usb_serial_port *port; | |
1884 | struct edgeport_port *edge_port; | |
4a90f09b | 1885 | struct tty_struct *tty; |
984f6868 | 1886 | struct device *dev; |
1da177e4 LT |
1887 | __u8 code = edge_serial->rxStatusCode; |
1888 | ||
1889 | /* switch the port pointer to the one being currently talked about */ | |
6b816378 JH |
1890 | if (edge_serial->rxPort >= edge_serial->serial->num_ports) |
1891 | return; | |
1da177e4 LT |
1892 | port = edge_serial->serial->port[edge_serial->rxPort]; |
1893 | edge_port = usb_get_serial_port_data(port); | |
1894 | if (edge_port == NULL) { | |
03f0dbf7 AC |
1895 | dev_err(&edge_serial->serial->dev->dev, |
1896 | "%s - edge_port == NULL for port %d\n", | |
1897 | __func__, edge_serial->rxPort); | |
1da177e4 LT |
1898 | return; |
1899 | } | |
984f6868 | 1900 | dev = &port->dev; |
1da177e4 LT |
1901 | |
1902 | if (code == IOSP_EXT_STATUS) { | |
1903 | switch (byte2) { | |
03f0dbf7 AC |
1904 | case IOSP_EXT_STATUS_CHASE_RSP: |
1905 | /* we want to do EXT status regardless of port | |
1906 | * open/closed */ | |
984f6868 GKH |
1907 | dev_dbg(dev, "%s - Port %u EXT CHASE_RSP Data = %02x\n", |
1908 | __func__, edge_serial->rxPort, byte3); | |
03f0dbf7 AC |
1909 | /* Currently, the only EXT_STATUS is Chase, so process |
1910 | * here instead of one more call to one more subroutine | |
1911 | * If/when more EXT_STATUS, there'll be more work to do | |
1912 | * Also, we currently clear flag and close the port | |
1913 | * regardless of content of above's Byte3. | |
1914 | * We could choose to do something else when Byte3 says | |
1915 | * Timeout on Chase from Edgeport, like wait longer in | |
1916 | * block_until_chase_response, but for now we don't. | |
1917 | */ | |
1918 | edge_port->chaseResponsePending = false; | |
1919 | wake_up(&edge_port->wait_chase); | |
1920 | return; | |
1da177e4 | 1921 | |
03f0dbf7 | 1922 | case IOSP_EXT_STATUS_RX_CHECK_RSP: |
984f6868 GKH |
1923 | dev_dbg(dev, "%s ========== Port %u CHECK_RSP Sequence = %02x =============\n", |
1924 | __func__, edge_serial->rxPort, byte3); | |
03f0dbf7 AC |
1925 | /* Port->RxCheckRsp = true; */ |
1926 | return; | |
1da177e4 LT |
1927 | } |
1928 | } | |
1929 | ||
1930 | if (code == IOSP_STATUS_OPEN_RSP) { | |
1931 | edge_port->txCredits = GET_TX_BUFFER_SIZE(byte3); | |
1932 | edge_port->maxTxCredits = edge_port->txCredits; | |
984f6868 GKH |
1933 | dev_dbg(dev, "%s - Port %u Open Response Initial MSR = %02x TxBufferSize = %d\n", |
1934 | __func__, edge_serial->rxPort, byte2, edge_port->txCredits); | |
03f0dbf7 | 1935 | handle_new_msr(edge_port, byte2); |
1da177e4 | 1936 | |
03f0dbf7 AC |
1937 | /* send the current line settings to the port so we are |
1938 | in sync with any further termios calls */ | |
4a90f09b AC |
1939 | tty = tty_port_tty_get(&edge_port->port->port); |
1940 | if (tty) { | |
1941 | change_port_settings(tty, | |
adc8d746 | 1942 | edge_port, &tty->termios); |
4a90f09b AC |
1943 | tty_kref_put(tty); |
1944 | } | |
1da177e4 LT |
1945 | |
1946 | /* we have completed the open */ | |
cb8eaa8b RK |
1947 | edge_port->openPending = false; |
1948 | edge_port->open = true; | |
1da177e4 LT |
1949 | wake_up(&edge_port->wait_open); |
1950 | return; | |
1951 | } | |
1952 | ||
03f0dbf7 AC |
1953 | /* If port is closed, silently discard all rcvd status. We can |
1954 | * have cases where buffered status is received AFTER the close | |
1955 | * port command is sent to the Edgeport. | |
1956 | */ | |
1957 | if (!edge_port->open || edge_port->closePending) | |
1da177e4 | 1958 | return; |
1da177e4 LT |
1959 | |
1960 | switch (code) { | |
03f0dbf7 AC |
1961 | /* Not currently sent by Edgeport */ |
1962 | case IOSP_STATUS_LSR: | |
984f6868 GKH |
1963 | dev_dbg(dev, "%s - Port %u LSR Status = %02x\n", |
1964 | __func__, edge_serial->rxPort, byte2); | |
03f0dbf7 AC |
1965 | handle_new_lsr(edge_port, false, byte2, 0); |
1966 | break; | |
1da177e4 | 1967 | |
03f0dbf7 | 1968 | case IOSP_STATUS_LSR_DATA: |
984f6868 GKH |
1969 | dev_dbg(dev, "%s - Port %u LSR Status = %02x, Data = %02x\n", |
1970 | __func__, edge_serial->rxPort, byte2, byte3); | |
03f0dbf7 AC |
1971 | /* byte2 is LSR Register */ |
1972 | /* byte3 is broken data byte */ | |
1973 | handle_new_lsr(edge_port, true, byte2, byte3); | |
1974 | break; | |
1975 | /* | |
1976 | * case IOSP_EXT_4_STATUS: | |
984f6868 | 1977 | * dev_dbg(dev, "%s - Port %u LSR Status = %02x Data = %02x\n", |
03f0dbf7 AC |
1978 | * __func__, edge_serial->rxPort, byte2, byte3); |
1979 | * break; | |
1980 | */ | |
1981 | case IOSP_STATUS_MSR: | |
984f6868 GKH |
1982 | dev_dbg(dev, "%s - Port %u MSR Status = %02x\n", |
1983 | __func__, edge_serial->rxPort, byte2); | |
03f0dbf7 AC |
1984 | /* |
1985 | * Process this new modem status and generate appropriate | |
1986 | * events, etc, based on the new status. This routine | |
1987 | * also saves the MSR in Port->ShadowMsr. | |
1988 | */ | |
1989 | handle_new_msr(edge_port, byte2); | |
1990 | break; | |
1da177e4 | 1991 | |
03f0dbf7 | 1992 | default: |
984f6868 | 1993 | dev_dbg(dev, "%s - Unrecognized IOSP status code %u\n", __func__, code); |
03f0dbf7 | 1994 | break; |
1da177e4 | 1995 | } |
1da177e4 LT |
1996 | } |
1997 | ||
1998 | ||
1999 | /***************************************************************************** | |
2000 | * edge_tty_recv | |
2001 | * this function passes data on to the tty flip buffer | |
2002 | *****************************************************************************/ | |
2e124b4a JS |
2003 | static void edge_tty_recv(struct usb_serial_port *port, unsigned char *data, |
2004 | int length) | |
1da177e4 LT |
2005 | { |
2006 | int cnt; | |
2007 | ||
05c7cd39 | 2008 | cnt = tty_insert_flip_string(&port->port, data, length); |
a108bfcb | 2009 | if (cnt < length) { |
05c7cd39 | 2010 | dev_err(&port->dev, "%s - dropping data, %d bytes lost\n", |
a108bfcb AC |
2011 | __func__, length - cnt); |
2012 | } | |
2013 | data += cnt; | |
2014 | length -= cnt; | |
1da177e4 | 2015 | |
2e124b4a | 2016 | tty_flip_buffer_push(&port->port); |
1da177e4 LT |
2017 | } |
2018 | ||
2019 | ||
2020 | /***************************************************************************** | |
2021 | * handle_new_msr | |
2022 | * this function handles any change to the msr register for a port. | |
2023 | *****************************************************************************/ | |
2024 | static void handle_new_msr(struct edgeport_port *edge_port, __u8 newMsr) | |
2025 | { | |
2026 | struct async_icount *icount; | |
2027 | ||
03f0dbf7 AC |
2028 | if (newMsr & (EDGEPORT_MSR_DELTA_CTS | EDGEPORT_MSR_DELTA_DSR | |
2029 | EDGEPORT_MSR_DELTA_RI | EDGEPORT_MSR_DELTA_CD)) { | |
d36a7712 | 2030 | icount = &edge_port->port->icount; |
1da177e4 LT |
2031 | |
2032 | /* update input line counters */ | |
03f0dbf7 | 2033 | if (newMsr & EDGEPORT_MSR_DELTA_CTS) |
1da177e4 | 2034 | icount->cts++; |
03f0dbf7 | 2035 | if (newMsr & EDGEPORT_MSR_DELTA_DSR) |
1da177e4 | 2036 | icount->dsr++; |
03f0dbf7 | 2037 | if (newMsr & EDGEPORT_MSR_DELTA_CD) |
1da177e4 | 2038 | icount->dcd++; |
03f0dbf7 | 2039 | if (newMsr & EDGEPORT_MSR_DELTA_RI) |
1da177e4 | 2040 | icount->rng++; |
8b8070d8 | 2041 | wake_up_interruptible(&edge_port->port->port.delta_msr_wait); |
1da177e4 LT |
2042 | } |
2043 | ||
2044 | /* Save the new modem status */ | |
2045 | edge_port->shadowMSR = newMsr & 0xf0; | |
1da177e4 LT |
2046 | } |
2047 | ||
2048 | ||
2049 | /***************************************************************************** | |
2050 | * handle_new_lsr | |
2051 | * this function handles any change to the lsr register for a port. | |
2052 | *****************************************************************************/ | |
03f0dbf7 AC |
2053 | static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData, |
2054 | __u8 lsr, __u8 data) | |
1da177e4 | 2055 | { |
03f0dbf7 AC |
2056 | __u8 newLsr = (__u8) (lsr & (__u8) |
2057 | (LSR_OVER_ERR | LSR_PAR_ERR | LSR_FRM_ERR | LSR_BREAK)); | |
2058 | struct async_icount *icount; | |
1da177e4 | 2059 | |
1da177e4 LT |
2060 | edge_port->shadowLSR = lsr; |
2061 | ||
2062 | if (newLsr & LSR_BREAK) { | |
03f0dbf7 AC |
2063 | /* |
2064 | * Parity and Framing errors only count if they | |
2065 | * occur exclusive of a break being | |
2066 | * received. | |
2067 | */ | |
1da177e4 LT |
2068 | newLsr &= (__u8)(LSR_OVER_ERR | LSR_BREAK); |
2069 | } | |
2070 | ||
2071 | /* Place LSR data byte into Rx buffer */ | |
2e124b4a JS |
2072 | if (lsrData) |
2073 | edge_tty_recv(edge_port->port, &data, 1); | |
2074 | ||
1da177e4 | 2075 | /* update input line counters */ |
d36a7712 | 2076 | icount = &edge_port->port->icount; |
03f0dbf7 | 2077 | if (newLsr & LSR_BREAK) |
1da177e4 | 2078 | icount->brk++; |
03f0dbf7 | 2079 | if (newLsr & LSR_OVER_ERR) |
1da177e4 | 2080 | icount->overrun++; |
03f0dbf7 | 2081 | if (newLsr & LSR_PAR_ERR) |
1da177e4 | 2082 | icount->parity++; |
03f0dbf7 | 2083 | if (newLsr & LSR_FRM_ERR) |
1da177e4 | 2084 | icount->frame++; |
1da177e4 LT |
2085 | } |
2086 | ||
2087 | ||
2088 | /**************************************************************************** | |
2089 | * sram_write | |
03f0dbf7 | 2090 | * writes a number of bytes to the Edgeport device's sram starting at the |
1da177e4 LT |
2091 | * given address. |
2092 | * If successful returns the number of bytes written, otherwise it returns | |
2093 | * a negative error number of the problem. | |
2094 | ****************************************************************************/ | |
03f0dbf7 AC |
2095 | static int sram_write(struct usb_serial *serial, __u16 extAddr, __u16 addr, |
2096 | __u16 length, const __u8 *data) | |
1da177e4 LT |
2097 | { |
2098 | int result; | |
2099 | __u16 current_length; | |
2100 | unsigned char *transfer_buffer; | |
2101 | ||
984f6868 | 2102 | dev_dbg(&serial->dev->dev, "%s - %x, %x, %d\n", __func__, extAddr, addr, length); |
1da177e4 | 2103 | |
03f0dbf7 | 2104 | transfer_buffer = kmalloc(64, GFP_KERNEL); |
10c642d0 | 2105 | if (!transfer_buffer) |
1da177e4 | 2106 | return -ENOMEM; |
1da177e4 LT |
2107 | |
2108 | /* need to split these writes up into 64 byte chunks */ | |
2109 | result = 0; | |
2110 | while (length > 0) { | |
03f0dbf7 | 2111 | if (length > 64) |
1da177e4 | 2112 | current_length = 64; |
03f0dbf7 | 2113 | else |
1da177e4 | 2114 | current_length = length; |
03f0dbf7 | 2115 | |
984f6868 | 2116 | /* dev_dbg(&serial->dev->dev, "%s - writing %x, %x, %d\n", __func__, extAddr, addr, current_length); */ |
03f0dbf7 AC |
2117 | memcpy(transfer_buffer, data, current_length); |
2118 | result = usb_control_msg(serial->dev, | |
2119 | usb_sndctrlpipe(serial->dev, 0), | |
2120 | USB_REQUEST_ION_WRITE_RAM, | |
2121 | 0x40, addr, extAddr, transfer_buffer, | |
2122 | current_length, 300); | |
1da177e4 LT |
2123 | if (result < 0) |
2124 | break; | |
2125 | length -= current_length; | |
2126 | addr += current_length; | |
2127 | data += current_length; | |
03f0dbf7 | 2128 | } |
1da177e4 | 2129 | |
03f0dbf7 | 2130 | kfree(transfer_buffer); |
1da177e4 LT |
2131 | return result; |
2132 | } | |
2133 | ||
2134 | ||
2135 | /**************************************************************************** | |
2136 | * rom_write | |
2137 | * writes a number of bytes to the Edgeport device's ROM starting at the | |
2138 | * given address. | |
2139 | * If successful returns the number of bytes written, otherwise it returns | |
2140 | * a negative error number of the problem. | |
2141 | ****************************************************************************/ | |
03f0dbf7 AC |
2142 | static int rom_write(struct usb_serial *serial, __u16 extAddr, __u16 addr, |
2143 | __u16 length, const __u8 *data) | |
1da177e4 LT |
2144 | { |
2145 | int result; | |
2146 | __u16 current_length; | |
2147 | unsigned char *transfer_buffer; | |
2148 | ||
03f0dbf7 | 2149 | transfer_buffer = kmalloc(64, GFP_KERNEL); |
10c642d0 | 2150 | if (!transfer_buffer) |
1da177e4 | 2151 | return -ENOMEM; |
1da177e4 LT |
2152 | |
2153 | /* need to split these writes up into 64 byte chunks */ | |
2154 | result = 0; | |
2155 | while (length > 0) { | |
03f0dbf7 | 2156 | if (length > 64) |
1da177e4 | 2157 | current_length = 64; |
03f0dbf7 | 2158 | else |
1da177e4 | 2159 | current_length = length; |
03f0dbf7 AC |
2160 | memcpy(transfer_buffer, data, current_length); |
2161 | result = usb_control_msg(serial->dev, | |
2162 | usb_sndctrlpipe(serial->dev, 0), | |
2163 | USB_REQUEST_ION_WRITE_ROM, 0x40, | |
2164 | addr, extAddr, | |
2165 | transfer_buffer, current_length, 300); | |
1da177e4 LT |
2166 | if (result < 0) |
2167 | break; | |
2168 | length -= current_length; | |
2169 | addr += current_length; | |
2170 | data += current_length; | |
03f0dbf7 | 2171 | } |
1da177e4 | 2172 | |
03f0dbf7 | 2173 | kfree(transfer_buffer); |
1da177e4 LT |
2174 | return result; |
2175 | } | |
2176 | ||
2177 | ||
2178 | /**************************************************************************** | |
2179 | * rom_read | |
2180 | * reads a number of bytes from the Edgeport device starting at the given | |
2181 | * address. | |
3c0e25d8 | 2182 | * Returns zero on success or a negative error number. |
1da177e4 | 2183 | ****************************************************************************/ |
03f0dbf7 AC |
2184 | static int rom_read(struct usb_serial *serial, __u16 extAddr, |
2185 | __u16 addr, __u16 length, __u8 *data) | |
1da177e4 LT |
2186 | { |
2187 | int result; | |
2188 | __u16 current_length; | |
2189 | unsigned char *transfer_buffer; | |
2190 | ||
03f0dbf7 | 2191 | transfer_buffer = kmalloc(64, GFP_KERNEL); |
10c642d0 | 2192 | if (!transfer_buffer) |
1da177e4 | 2193 | return -ENOMEM; |
1da177e4 LT |
2194 | |
2195 | /* need to split these reads up into 64 byte chunks */ | |
2196 | result = 0; | |
2197 | while (length > 0) { | |
03f0dbf7 | 2198 | if (length > 64) |
1da177e4 | 2199 | current_length = 64; |
03f0dbf7 | 2200 | else |
1da177e4 | 2201 | current_length = length; |
03f0dbf7 AC |
2202 | result = usb_control_msg(serial->dev, |
2203 | usb_rcvctrlpipe(serial->dev, 0), | |
2204 | USB_REQUEST_ION_READ_ROM, | |
2205 | 0xC0, addr, extAddr, transfer_buffer, | |
2206 | current_length, 300); | |
3c0e25d8 JH |
2207 | if (result < current_length) { |
2208 | if (result >= 0) | |
2209 | result = -EIO; | |
1da177e4 | 2210 | break; |
3c0e25d8 | 2211 | } |
03f0dbf7 | 2212 | memcpy(data, transfer_buffer, current_length); |
1da177e4 LT |
2213 | length -= current_length; |
2214 | addr += current_length; | |
2215 | data += current_length; | |
3c0e25d8 JH |
2216 | |
2217 | result = 0; | |
03f0dbf7 | 2218 | } |
1da177e4 | 2219 | |
03f0dbf7 | 2220 | kfree(transfer_buffer); |
1da177e4 LT |
2221 | return result; |
2222 | } | |
2223 | ||
2224 | ||
2225 | /**************************************************************************** | |
2226 | * send_iosp_ext_cmd | |
2227 | * Is used to send a IOSP message to the Edgeport device | |
2228 | ****************************************************************************/ | |
03f0dbf7 AC |
2229 | static int send_iosp_ext_cmd(struct edgeport_port *edge_port, |
2230 | __u8 command, __u8 param) | |
1da177e4 LT |
2231 | { |
2232 | unsigned char *buffer; | |
2233 | unsigned char *currentCommand; | |
2234 | int length = 0; | |
2235 | int status = 0; | |
2236 | ||
03f0dbf7 | 2237 | buffer = kmalloc(10, GFP_ATOMIC); |
10c642d0 | 2238 | if (!buffer) |
1da177e4 | 2239 | return -ENOMEM; |
1da177e4 LT |
2240 | |
2241 | currentCommand = buffer; | |
2242 | ||
1143832e GKH |
2243 | MAKE_CMD_EXT_CMD(¤tCommand, &length, edge_port->port->port_number, |
2244 | command, param); | |
1da177e4 | 2245 | |
03f0dbf7 | 2246 | status = write_cmd_usb(edge_port, buffer, length); |
1da177e4 LT |
2247 | if (status) { |
2248 | /* something bad happened, let's free up the memory */ | |
2249 | kfree(buffer); | |
2250 | } | |
2251 | ||
2252 | return status; | |
2253 | } | |
2254 | ||
2255 | ||
2256 | /***************************************************************************** | |
2257 | * write_cmd_usb | |
2258 | * this function writes the given buffer out to the bulk write endpoint. | |
2259 | *****************************************************************************/ | |
03f0dbf7 AC |
2260 | static int write_cmd_usb(struct edgeport_port *edge_port, |
2261 | unsigned char *buffer, int length) | |
1da177e4 | 2262 | { |
03f0dbf7 AC |
2263 | struct edgeport_serial *edge_serial = |
2264 | usb_get_serial_data(edge_port->port->serial); | |
984f6868 | 2265 | struct device *dev = &edge_port->port->dev; |
1da177e4 LT |
2266 | int status = 0; |
2267 | struct urb *urb; | |
1da177e4 | 2268 | |
59d33f2f | 2269 | usb_serial_debug_data(dev, __func__, length, buffer); |
1da177e4 LT |
2270 | |
2271 | /* Allocate our next urb */ | |
03f0dbf7 | 2272 | urb = usb_alloc_urb(0, GFP_ATOMIC); |
1da177e4 LT |
2273 | if (!urb) |
2274 | return -ENOMEM; | |
2275 | ||
96c706ed | 2276 | atomic_inc(&CmdUrbs); |
984f6868 GKH |
2277 | dev_dbg(dev, "%s - ALLOCATE URB %p (outstanding %d)\n", |
2278 | __func__, urb, atomic_read(&CmdUrbs)); | |
1da177e4 | 2279 | |
03f0dbf7 AC |
2280 | usb_fill_bulk_urb(urb, edge_serial->serial->dev, |
2281 | usb_sndbulkpipe(edge_serial->serial->dev, | |
2282 | edge_serial->bulk_out_endpoint), | |
2283 | buffer, length, edge_bulk_out_cmd_callback, edge_port); | |
1da177e4 | 2284 | |
cb8eaa8b | 2285 | edge_port->commandPending = true; |
1da177e4 LT |
2286 | status = usb_submit_urb(urb, GFP_ATOMIC); |
2287 | ||
2288 | if (status) { | |
2289 | /* something went wrong */ | |
984f6868 GKH |
2290 | dev_err(dev, "%s - usb_submit_urb(write command) failed, status = %d\n", |
2291 | __func__, status); | |
1da177e4 | 2292 | usb_free_urb(urb); |
96c706ed | 2293 | atomic_dec(&CmdUrbs); |
1da177e4 LT |
2294 | return status; |
2295 | } | |
2296 | ||
1da177e4 | 2297 | #if 0 |
03f0dbf7 | 2298 | wait_event(&edge_port->wait_command, !edge_port->commandPending); |
1da177e4 | 2299 | |
cb8eaa8b | 2300 | if (edge_port->commandPending) { |
1da177e4 | 2301 | /* command timed out */ |
984f6868 | 2302 | dev_dbg(dev, "%s - command timed out\n", __func__); |
1da177e4 LT |
2303 | status = -EINVAL; |
2304 | } | |
2305 | #endif | |
2306 | return status; | |
2307 | } | |
2308 | ||
2309 | ||
2310 | /***************************************************************************** | |
2311 | * send_cmd_write_baud_rate | |
2312 | * this function sends the proper command to change the baud rate of the | |
2313 | * specified port. | |
2314 | *****************************************************************************/ | |
03f0dbf7 AC |
2315 | static int send_cmd_write_baud_rate(struct edgeport_port *edge_port, |
2316 | int baudRate) | |
1da177e4 | 2317 | { |
03f0dbf7 AC |
2318 | struct edgeport_serial *edge_serial = |
2319 | usb_get_serial_data(edge_port->port->serial); | |
984f6868 | 2320 | struct device *dev = &edge_port->port->dev; |
1da177e4 LT |
2321 | unsigned char *cmdBuffer; |
2322 | unsigned char *currCmd; | |
2323 | int cmdLen = 0; | |
2324 | int divisor; | |
2325 | int status; | |
1143832e | 2326 | u32 number = edge_port->port->port_number; |
1da177e4 | 2327 | |
bc71e479 AK |
2328 | if (edge_serial->is_epic && |
2329 | !edge_serial->epic_descriptor.Supports.IOSPSetBaudRate) { | |
1143832e GKH |
2330 | dev_dbg(dev, "SendCmdWriteBaudRate - NOT Setting baud rate for port, baud = %d\n", |
2331 | baudRate); | |
6e8cf775 GKH |
2332 | return 0; |
2333 | } | |
2334 | ||
1143832e | 2335 | dev_dbg(dev, "%s - baud = %d\n", __func__, baudRate); |
1da177e4 | 2336 | |
984f6868 | 2337 | status = calc_baud_rate_divisor(dev, baudRate, &divisor); |
1da177e4 | 2338 | if (status) { |
984f6868 | 2339 | dev_err(dev, "%s - bad baud rate\n", __func__); |
1da177e4 LT |
2340 | return status; |
2341 | } | |
2342 | ||
03f0dbf7 AC |
2343 | /* Alloc memory for the string of commands. */ |
2344 | cmdBuffer = kmalloc(0x100, GFP_ATOMIC); | |
10c642d0 | 2345 | if (!cmdBuffer) |
1da177e4 | 2346 | return -ENOMEM; |
10c642d0 | 2347 | |
1da177e4 LT |
2348 | currCmd = cmdBuffer; |
2349 | ||
03f0dbf7 AC |
2350 | /* Enable access to divisor latch */ |
2351 | MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, number, LCR, LCR_DL_ENABLE); | |
1da177e4 | 2352 | |
03f0dbf7 AC |
2353 | /* Write the divisor itself */ |
2354 | MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, number, DLL, LOW8(divisor)); | |
2355 | MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, number, DLM, HIGH8(divisor)); | |
1da177e4 | 2356 | |
03f0dbf7 AC |
2357 | /* Restore original value to disable access to divisor latch */ |
2358 | MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, number, LCR, | |
2359 | edge_port->shadowLCR); | |
1da177e4 | 2360 | |
03f0dbf7 | 2361 | status = write_cmd_usb(edge_port, cmdBuffer, cmdLen); |
1da177e4 LT |
2362 | if (status) { |
2363 | /* something bad happened, let's free up the memory */ | |
03f0dbf7 | 2364 | kfree(cmdBuffer); |
1da177e4 LT |
2365 | } |
2366 | ||
2367 | return status; | |
2368 | } | |
2369 | ||
2370 | ||
2371 | /***************************************************************************** | |
2372 | * calc_baud_rate_divisor | |
2373 | * this function calculates the proper baud rate divisor for the specified | |
2374 | * baud rate. | |
2375 | *****************************************************************************/ | |
984f6868 | 2376 | static int calc_baud_rate_divisor(struct device *dev, int baudrate, int *divisor) |
1da177e4 LT |
2377 | { |
2378 | int i; | |
2379 | __u16 custom; | |
2380 | ||
52950ed4 | 2381 | for (i = 0; i < ARRAY_SIZE(divisor_table); i++) { |
03f0dbf7 | 2382 | if (divisor_table[i].BaudRate == baudrate) { |
1da177e4 LT |
2383 | *divisor = divisor_table[i].Divisor; |
2384 | return 0; | |
2385 | } | |
2386 | } | |
2387 | ||
03f0dbf7 AC |
2388 | /* We have tried all of the standard baud rates |
2389 | * lets try to calculate the divisor for this baud rate | |
2390 | * Make sure the baud rate is reasonable */ | |
1da177e4 | 2391 | if (baudrate > 50 && baudrate < 230400) { |
03f0dbf7 | 2392 | /* get divisor */ |
1da177e4 LT |
2393 | custom = (__u16)((230400L + baudrate/2) / baudrate); |
2394 | ||
2395 | *divisor = custom; | |
2396 | ||
984f6868 | 2397 | dev_dbg(dev, "%s - Baud %d = %d\n", __func__, baudrate, custom); |
1da177e4 LT |
2398 | return 0; |
2399 | } | |
2400 | ||
2401 | return -1; | |
2402 | } | |
2403 | ||
2404 | ||
2405 | /***************************************************************************** | |
2406 | * send_cmd_write_uart_register | |
fd589a8f | 2407 | * this function builds up a uart register message and sends to the device. |
1da177e4 | 2408 | *****************************************************************************/ |
03f0dbf7 AC |
2409 | static int send_cmd_write_uart_register(struct edgeport_port *edge_port, |
2410 | __u8 regNum, __u8 regValue) | |
1da177e4 | 2411 | { |
03f0dbf7 AC |
2412 | struct edgeport_serial *edge_serial = |
2413 | usb_get_serial_data(edge_port->port->serial); | |
984f6868 | 2414 | struct device *dev = &edge_port->port->dev; |
1da177e4 LT |
2415 | unsigned char *cmdBuffer; |
2416 | unsigned char *currCmd; | |
2417 | unsigned long cmdLen = 0; | |
2418 | int status; | |
2419 | ||
984f6868 GKH |
2420 | dev_dbg(dev, "%s - write to %s register 0x%02x\n", |
2421 | (regNum == MCR) ? "MCR" : "LCR", __func__, regValue); | |
1da177e4 | 2422 | |
bc71e479 AK |
2423 | if (edge_serial->is_epic && |
2424 | !edge_serial->epic_descriptor.Supports.IOSPWriteMCR && | |
2425 | regNum == MCR) { | |
984f6868 | 2426 | dev_dbg(dev, "SendCmdWriteUartReg - Not writing to MCR Register\n"); |
6e8cf775 GKH |
2427 | return 0; |
2428 | } | |
2429 | ||
bc71e479 AK |
2430 | if (edge_serial->is_epic && |
2431 | !edge_serial->epic_descriptor.Supports.IOSPWriteLCR && | |
2432 | regNum == LCR) { | |
984f6868 | 2433 | dev_dbg(dev, "SendCmdWriteUartReg - Not writing to LCR Register\n"); |
6e8cf775 GKH |
2434 | return 0; |
2435 | } | |
2436 | ||
03f0dbf7 AC |
2437 | /* Alloc memory for the string of commands. */ |
2438 | cmdBuffer = kmalloc(0x10, GFP_ATOMIC); | |
2439 | if (cmdBuffer == NULL) | |
1da177e4 | 2440 | return -ENOMEM; |
1da177e4 LT |
2441 | |
2442 | currCmd = cmdBuffer; | |
2443 | ||
03f0dbf7 | 2444 | /* Build a cmd in the buffer to write the given register */ |
1143832e GKH |
2445 | MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, edge_port->port->port_number, |
2446 | regNum, regValue); | |
1da177e4 LT |
2447 | |
2448 | status = write_cmd_usb(edge_port, cmdBuffer, cmdLen); | |
2449 | if (status) { | |
2450 | /* something bad happened, let's free up the memory */ | |
03f0dbf7 | 2451 | kfree(cmdBuffer); |
1da177e4 LT |
2452 | } |
2453 | ||
2454 | return status; | |
2455 | } | |
2456 | ||
2457 | ||
2458 | /***************************************************************************** | |
2459 | * change_port_settings | |
03f0dbf7 AC |
2460 | * This routine is called to set the UART on the device to match the |
2461 | * specified new settings. | |
1da177e4 | 2462 | *****************************************************************************/ |
95da310e AC |
2463 | |
2464 | static void change_port_settings(struct tty_struct *tty, | |
2465 | struct edgeport_port *edge_port, struct ktermios *old_termios) | |
1da177e4 | 2466 | { |
984f6868 | 2467 | struct device *dev = &edge_port->port->dev; |
03f0dbf7 AC |
2468 | struct edgeport_serial *edge_serial = |
2469 | usb_get_serial_data(edge_port->port->serial); | |
1da177e4 LT |
2470 | int baud; |
2471 | unsigned cflag; | |
2472 | __u8 mask = 0xff; | |
2473 | __u8 lData; | |
2474 | __u8 lParity; | |
2475 | __u8 lStop; | |
2476 | __u8 rxFlow; | |
2477 | __u8 txFlow; | |
2478 | int status; | |
2479 | ||
cb8eaa8b RK |
2480 | if (!edge_port->open && |
2481 | !edge_port->openPending) { | |
984f6868 | 2482 | dev_dbg(dev, "%s - port not opened\n", __func__); |
1da177e4 LT |
2483 | return; |
2484 | } | |
2485 | ||
adc8d746 | 2486 | cflag = tty->termios.c_cflag; |
1da177e4 LT |
2487 | |
2488 | switch (cflag & CSIZE) { | |
03f0dbf7 AC |
2489 | case CS5: |
2490 | lData = LCR_BITS_5; mask = 0x1f; | |
984f6868 | 2491 | dev_dbg(dev, "%s - data bits = 5\n", __func__); |
03f0dbf7 AC |
2492 | break; |
2493 | case CS6: | |
2494 | lData = LCR_BITS_6; mask = 0x3f; | |
984f6868 | 2495 | dev_dbg(dev, "%s - data bits = 6\n", __func__); |
03f0dbf7 AC |
2496 | break; |
2497 | case CS7: | |
2498 | lData = LCR_BITS_7; mask = 0x7f; | |
984f6868 | 2499 | dev_dbg(dev, "%s - data bits = 7\n", __func__); |
03f0dbf7 AC |
2500 | break; |
2501 | default: | |
2502 | case CS8: | |
2503 | lData = LCR_BITS_8; | |
984f6868 | 2504 | dev_dbg(dev, "%s - data bits = 8\n", __func__); |
03f0dbf7 | 2505 | break; |
1da177e4 LT |
2506 | } |
2507 | ||
2508 | lParity = LCR_PAR_NONE; | |
2509 | if (cflag & PARENB) { | |
2510 | if (cflag & CMSPAR) { | |
2511 | if (cflag & PARODD) { | |
2512 | lParity = LCR_PAR_MARK; | |
984f6868 | 2513 | dev_dbg(dev, "%s - parity = mark\n", __func__); |
1da177e4 LT |
2514 | } else { |
2515 | lParity = LCR_PAR_SPACE; | |
984f6868 | 2516 | dev_dbg(dev, "%s - parity = space\n", __func__); |
1da177e4 LT |
2517 | } |
2518 | } else if (cflag & PARODD) { | |
2519 | lParity = LCR_PAR_ODD; | |
984f6868 | 2520 | dev_dbg(dev, "%s - parity = odd\n", __func__); |
1da177e4 LT |
2521 | } else { |
2522 | lParity = LCR_PAR_EVEN; | |
984f6868 | 2523 | dev_dbg(dev, "%s - parity = even\n", __func__); |
1da177e4 LT |
2524 | } |
2525 | } else { | |
984f6868 | 2526 | dev_dbg(dev, "%s - parity = none\n", __func__); |
1da177e4 LT |
2527 | } |
2528 | ||
2529 | if (cflag & CSTOPB) { | |
2530 | lStop = LCR_STOP_2; | |
984f6868 | 2531 | dev_dbg(dev, "%s - stop bits = 2\n", __func__); |
1da177e4 LT |
2532 | } else { |
2533 | lStop = LCR_STOP_1; | |
984f6868 | 2534 | dev_dbg(dev, "%s - stop bits = 1\n", __func__); |
1da177e4 LT |
2535 | } |
2536 | ||
2537 | /* figure out the flow control settings */ | |
2538 | rxFlow = txFlow = 0x00; | |
2539 | if (cflag & CRTSCTS) { | |
2540 | rxFlow |= IOSP_RX_FLOW_RTS; | |
2541 | txFlow |= IOSP_TX_FLOW_CTS; | |
984f6868 | 2542 | dev_dbg(dev, "%s - RTS/CTS is enabled\n", __func__); |
1da177e4 | 2543 | } else { |
984f6868 | 2544 | dev_dbg(dev, "%s - RTS/CTS is disabled\n", __func__); |
1da177e4 LT |
2545 | } |
2546 | ||
03f0dbf7 AC |
2547 | /* if we are implementing XON/XOFF, set the start and stop character |
2548 | in the device */ | |
1da177e4 LT |
2549 | if (I_IXOFF(tty) || I_IXON(tty)) { |
2550 | unsigned char stop_char = STOP_CHAR(tty); | |
2551 | unsigned char start_char = START_CHAR(tty); | |
2552 | ||
232dce89 GB |
2553 | if (!edge_serial->is_epic || |
2554 | edge_serial->epic_descriptor.Supports.IOSPSetXChar) { | |
03f0dbf7 AC |
2555 | send_iosp_ext_cmd(edge_port, |
2556 | IOSP_CMD_SET_XON_CHAR, start_char); | |
2557 | send_iosp_ext_cmd(edge_port, | |
2558 | IOSP_CMD_SET_XOFF_CHAR, stop_char); | |
6e8cf775 | 2559 | } |
1da177e4 LT |
2560 | |
2561 | /* if we are implementing INBOUND XON/XOFF */ | |
2562 | if (I_IXOFF(tty)) { | |
2563 | rxFlow |= IOSP_RX_FLOW_XON_XOFF; | |
984f6868 GKH |
2564 | dev_dbg(dev, "%s - INBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x\n", |
2565 | __func__, start_char, stop_char); | |
1da177e4 | 2566 | } else { |
984f6868 | 2567 | dev_dbg(dev, "%s - INBOUND XON/XOFF is disabled\n", __func__); |
1da177e4 LT |
2568 | } |
2569 | ||
2570 | /* if we are implementing OUTBOUND XON/XOFF */ | |
2571 | if (I_IXON(tty)) { | |
2572 | txFlow |= IOSP_TX_FLOW_XON_XOFF; | |
984f6868 GKH |
2573 | dev_dbg(dev, "%s - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x\n", |
2574 | __func__, start_char, stop_char); | |
1da177e4 | 2575 | } else { |
984f6868 | 2576 | dev_dbg(dev, "%s - OUTBOUND XON/XOFF is disabled\n", __func__); |
1da177e4 LT |
2577 | } |
2578 | } | |
2579 | ||
2580 | /* Set flow control to the configured value */ | |
232dce89 GB |
2581 | if (!edge_serial->is_epic || |
2582 | edge_serial->epic_descriptor.Supports.IOSPSetRxFlow) | |
6e8cf775 | 2583 | send_iosp_ext_cmd(edge_port, IOSP_CMD_SET_RX_FLOW, rxFlow); |
232dce89 GB |
2584 | if (!edge_serial->is_epic || |
2585 | edge_serial->epic_descriptor.Supports.IOSPSetTxFlow) | |
6e8cf775 | 2586 | send_iosp_ext_cmd(edge_port, IOSP_CMD_SET_TX_FLOW, txFlow); |
1da177e4 LT |
2587 | |
2588 | ||
2589 | edge_port->shadowLCR &= ~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK); | |
2590 | edge_port->shadowLCR |= (lData | lParity | lStop); | |
2591 | ||
2592 | edge_port->validDataMask = mask; | |
2593 | ||
2594 | /* Send the updated LCR value to the EdgePort */ | |
03f0dbf7 AC |
2595 | status = send_cmd_write_uart_register(edge_port, LCR, |
2596 | edge_port->shadowLCR); | |
2597 | if (status != 0) | |
1da177e4 | 2598 | return; |
1da177e4 LT |
2599 | |
2600 | /* set up the MCR register and send it to the EdgePort */ | |
2601 | edge_port->shadowMCR = MCR_MASTER_IE; | |
03f0dbf7 | 2602 | if (cflag & CBAUD) |
1da177e4 | 2603 | edge_port->shadowMCR |= (MCR_DTR | MCR_RTS); |
03f0dbf7 AC |
2604 | |
2605 | status = send_cmd_write_uart_register(edge_port, MCR, | |
2606 | edge_port->shadowMCR); | |
2607 | if (status != 0) | |
1da177e4 | 2608 | return; |
1da177e4 LT |
2609 | |
2610 | /* Determine divisor based on baud rate */ | |
2611 | baud = tty_get_baud_rate(tty); | |
2612 | if (!baud) { | |
2613 | /* pick a default, any default... */ | |
2614 | baud = 9600; | |
2615 | } | |
2616 | ||
984f6868 | 2617 | dev_dbg(dev, "%s - baud rate = %d\n", __func__, baud); |
03f0dbf7 | 2618 | status = send_cmd_write_baud_rate(edge_port, baud); |
6ce073bd AC |
2619 | if (status == -1) { |
2620 | /* Speed change was not possible - put back the old speed */ | |
2621 | baud = tty_termios_baud_rate(old_termios); | |
2622 | tty_encode_baud_rate(tty, baud, baud); | |
2623 | } | |
1da177e4 LT |
2624 | } |
2625 | ||
2626 | ||
2627 | /**************************************************************************** | |
2628 | * unicode_to_ascii | |
2629 | * Turns a string from Unicode into ASCII. | |
2630 | * Doesn't do a good job with any characters that are outside the normal | |
2631 | * ASCII range, but it's only for debugging... | |
2632 | * NOTE: expects the unicode in LE format | |
2633 | ****************************************************************************/ | |
03f0dbf7 AC |
2634 | static void unicode_to_ascii(char *string, int buflen, |
2635 | __le16 *unicode, int unicode_size) | |
1da177e4 LT |
2636 | { |
2637 | int i; | |
2638 | ||
ad93375a | 2639 | if (buflen <= 0) /* never happens, but... */ |
1da177e4 | 2640 | return; |
ad93375a | 2641 | --buflen; /* space for nul */ |
1da177e4 | 2642 | |
ad93375a PZ |
2643 | for (i = 0; i < unicode_size; i++) { |
2644 | if (i >= buflen) | |
2645 | break; | |
1da177e4 | 2646 | string[i] = (char)(le16_to_cpu(unicode[i])); |
ad93375a PZ |
2647 | } |
2648 | string[i] = 0x00; | |
1da177e4 LT |
2649 | } |
2650 | ||
2651 | ||
2652 | /**************************************************************************** | |
2653 | * get_manufacturing_desc | |
03f0dbf7 | 2654 | * reads in the manufacturing descriptor and stores it into the serial |
1da177e4 LT |
2655 | * structure. |
2656 | ****************************************************************************/ | |
03f0dbf7 | 2657 | static void get_manufacturing_desc(struct edgeport_serial *edge_serial) |
1da177e4 | 2658 | { |
984f6868 | 2659 | struct device *dev = &edge_serial->serial->dev->dev; |
1da177e4 LT |
2660 | int response; |
2661 | ||
984f6868 | 2662 | dev_dbg(dev, "getting manufacturer descriptor\n"); |
1da177e4 | 2663 | |
03f0dbf7 AC |
2664 | response = rom_read(edge_serial->serial, |
2665 | (EDGE_MANUF_DESC_ADDR & 0xffff0000) >> 16, | |
2666 | (__u16)(EDGE_MANUF_DESC_ADDR & 0x0000ffff), | |
2667 | EDGE_MANUF_DESC_LEN, | |
2668 | (__u8 *)(&edge_serial->manuf_descriptor)); | |
1da177e4 | 2669 | |
3c0e25d8 JH |
2670 | if (response < 0) { |
2671 | dev_err(dev, "error in getting manufacturer descriptor: %d\n", | |
2672 | response); | |
2673 | } else { | |
1da177e4 | 2674 | char string[30]; |
984f6868 GKH |
2675 | dev_dbg(dev, "**Manufacturer Descriptor\n"); |
2676 | dev_dbg(dev, " RomSize: %dK\n", | |
03f0dbf7 | 2677 | edge_serial->manuf_descriptor.RomSize); |
984f6868 | 2678 | dev_dbg(dev, " RamSize: %dK\n", |
03f0dbf7 | 2679 | edge_serial->manuf_descriptor.RamSize); |
984f6868 | 2680 | dev_dbg(dev, " CpuRev: %d\n", |
03f0dbf7 | 2681 | edge_serial->manuf_descriptor.CpuRev); |
984f6868 | 2682 | dev_dbg(dev, " BoardRev: %d\n", |
03f0dbf7 | 2683 | edge_serial->manuf_descriptor.BoardRev); |
984f6868 | 2684 | dev_dbg(dev, " NumPorts: %d\n", |
03f0dbf7 | 2685 | edge_serial->manuf_descriptor.NumPorts); |
984f6868 | 2686 | dev_dbg(dev, " DescDate: %d/%d/%d\n", |
03f0dbf7 AC |
2687 | edge_serial->manuf_descriptor.DescDate[0], |
2688 | edge_serial->manuf_descriptor.DescDate[1], | |
2689 | edge_serial->manuf_descriptor.DescDate[2]+1900); | |
4bc203d9 | 2690 | unicode_to_ascii(string, sizeof(string), |
03f0dbf7 AC |
2691 | edge_serial->manuf_descriptor.SerialNumber, |
2692 | edge_serial->manuf_descriptor.SerNumLength/2); | |
984f6868 | 2693 | dev_dbg(dev, " SerialNumber: %s\n", string); |
4bc203d9 | 2694 | unicode_to_ascii(string, sizeof(string), |
03f0dbf7 AC |
2695 | edge_serial->manuf_descriptor.AssemblyNumber, |
2696 | edge_serial->manuf_descriptor.AssemblyNumLength/2); | |
984f6868 | 2697 | dev_dbg(dev, " AssemblyNumber: %s\n", string); |
4bc203d9 | 2698 | unicode_to_ascii(string, sizeof(string), |
ad93375a PZ |
2699 | edge_serial->manuf_descriptor.OemAssyNumber, |
2700 | edge_serial->manuf_descriptor.OemAssyNumLength/2); | |
984f6868 GKH |
2701 | dev_dbg(dev, " OemAssyNumber: %s\n", string); |
2702 | dev_dbg(dev, " UartType: %d\n", | |
03f0dbf7 | 2703 | edge_serial->manuf_descriptor.UartType); |
984f6868 | 2704 | dev_dbg(dev, " IonPid: %d\n", |
03f0dbf7 | 2705 | edge_serial->manuf_descriptor.IonPid); |
984f6868 | 2706 | dev_dbg(dev, " IonConfig: %d\n", |
03f0dbf7 | 2707 | edge_serial->manuf_descriptor.IonConfig); |
1da177e4 LT |
2708 | } |
2709 | } | |
2710 | ||
2711 | ||
2712 | /**************************************************************************** | |
2713 | * get_boot_desc | |
03f0dbf7 | 2714 | * reads in the bootloader descriptor and stores it into the serial |
1da177e4 LT |
2715 | * structure. |
2716 | ****************************************************************************/ | |
03f0dbf7 | 2717 | static void get_boot_desc(struct edgeport_serial *edge_serial) |
1da177e4 | 2718 | { |
984f6868 | 2719 | struct device *dev = &edge_serial->serial->dev->dev; |
1da177e4 LT |
2720 | int response; |
2721 | ||
984f6868 | 2722 | dev_dbg(dev, "getting boot descriptor\n"); |
1da177e4 | 2723 | |
03f0dbf7 AC |
2724 | response = rom_read(edge_serial->serial, |
2725 | (EDGE_BOOT_DESC_ADDR & 0xffff0000) >> 16, | |
2726 | (__u16)(EDGE_BOOT_DESC_ADDR & 0x0000ffff), | |
2727 | EDGE_BOOT_DESC_LEN, | |
2728 | (__u8 *)(&edge_serial->boot_descriptor)); | |
1da177e4 | 2729 | |
3c0e25d8 JH |
2730 | if (response < 0) { |
2731 | dev_err(dev, "error in getting boot descriptor: %d\n", | |
2732 | response); | |
2733 | } else { | |
984f6868 GKH |
2734 | dev_dbg(dev, "**Boot Descriptor:\n"); |
2735 | dev_dbg(dev, " BootCodeLength: %d\n", | |
2736 | le16_to_cpu(edge_serial->boot_descriptor.BootCodeLength)); | |
2737 | dev_dbg(dev, " MajorVersion: %d\n", | |
03f0dbf7 | 2738 | edge_serial->boot_descriptor.MajorVersion); |
984f6868 | 2739 | dev_dbg(dev, " MinorVersion: %d\n", |
03f0dbf7 | 2740 | edge_serial->boot_descriptor.MinorVersion); |
984f6868 | 2741 | dev_dbg(dev, " BuildNumber: %d\n", |
03f0dbf7 | 2742 | le16_to_cpu(edge_serial->boot_descriptor.BuildNumber)); |
984f6868 | 2743 | dev_dbg(dev, " Capabilities: 0x%x\n", |
03f0dbf7 | 2744 | le16_to_cpu(edge_serial->boot_descriptor.Capabilities)); |
984f6868 | 2745 | dev_dbg(dev, " UConfig0: %d\n", |
03f0dbf7 | 2746 | edge_serial->boot_descriptor.UConfig0); |
984f6868 | 2747 | dev_dbg(dev, " UConfig1: %d\n", |
03f0dbf7 | 2748 | edge_serial->boot_descriptor.UConfig1); |
1da177e4 LT |
2749 | } |
2750 | } | |
2751 | ||
2752 | ||
2753 | /**************************************************************************** | |
2754 | * load_application_firmware | |
2755 | * This is called to load the application firmware to the device | |
2756 | ****************************************************************************/ | |
03f0dbf7 | 2757 | static void load_application_firmware(struct edgeport_serial *edge_serial) |
1da177e4 | 2758 | { |
984f6868 | 2759 | struct device *dev = &edge_serial->serial->dev->dev; |
5b9ea932 JS |
2760 | const struct ihex_binrec *rec; |
2761 | const struct firmware *fw; | |
2762 | const char *fw_name; | |
2763 | const char *fw_info; | |
1da177e4 | 2764 | int response; |
5b9ea932 JS |
2765 | __u32 Operaddr; |
2766 | __u16 build; | |
1da177e4 LT |
2767 | |
2768 | switch (edge_serial->product_info.iDownloadFile) { | |
2769 | case EDGE_DOWNLOAD_FILE_I930: | |
5b9ea932 JS |
2770 | fw_info = "downloading firmware version (930)"; |
2771 | fw_name = "edgeport/down.fw"; | |
1da177e4 LT |
2772 | break; |
2773 | ||
2774 | case EDGE_DOWNLOAD_FILE_80251: | |
5b9ea932 JS |
2775 | fw_info = "downloading firmware version (80251)"; |
2776 | fw_name = "edgeport/down2.fw"; | |
1da177e4 LT |
2777 | break; |
2778 | ||
2779 | case EDGE_DOWNLOAD_FILE_NONE: | |
984f6868 | 2780 | dev_dbg(dev, "No download file specified, skipping download\n"); |
1da177e4 LT |
2781 | return; |
2782 | ||
2783 | default: | |
2784 | return; | |
2785 | } | |
2786 | ||
5b9ea932 JS |
2787 | response = request_ihex_firmware(&fw, fw_name, |
2788 | &edge_serial->serial->dev->dev); | |
2789 | if (response) { | |
984f6868 | 2790 | dev_err(dev, "Failed to load image \"%s\" err %d\n", |
5b9ea932 JS |
2791 | fw_name, response); |
2792 | return; | |
2793 | } | |
2794 | ||
2795 | rec = (const struct ihex_binrec *)fw->data; | |
2796 | build = (rec->data[2] << 8) | rec->data[3]; | |
2797 | ||
984f6868 | 2798 | dev_dbg(dev, "%s %d.%d.%d\n", fw_info, rec->data[0], rec->data[1], build); |
5b9ea932 | 2799 | |
271c1150 BM |
2800 | edge_serial->product_info.FirmwareMajorVersion = rec->data[0]; |
2801 | edge_serial->product_info.FirmwareMinorVersion = rec->data[1]; | |
5b9ea932 | 2802 | edge_serial->product_info.FirmwareBuildNumber = cpu_to_le16(build); |
1da177e4 | 2803 | |
5b9ea932 JS |
2804 | for (rec = ihex_next_binrec(rec); rec; |
2805 | rec = ihex_next_binrec(rec)) { | |
2806 | Operaddr = be32_to_cpu(rec->addr); | |
2807 | response = sram_write(edge_serial->serial, | |
2808 | Operaddr >> 16, | |
2809 | Operaddr & 0xFFFF, | |
2810 | be16_to_cpu(rec->len), | |
2811 | &rec->data[0]); | |
1da177e4 | 2812 | if (response < 0) { |
5b9ea932 JS |
2813 | dev_err(&edge_serial->serial->dev->dev, |
2814 | "sram_write failed (%x, %x, %d)\n", | |
2815 | Operaddr >> 16, Operaddr & 0xFFFF, | |
2816 | be16_to_cpu(rec->len)); | |
1da177e4 LT |
2817 | break; |
2818 | } | |
2819 | } | |
2820 | ||
984f6868 GKH |
2821 | dev_dbg(dev, "sending exec_dl_code\n"); |
2822 | response = usb_control_msg (edge_serial->serial->dev, | |
2823 | usb_sndctrlpipe(edge_serial->serial->dev, 0), | |
2824 | USB_REQUEST_ION_EXEC_DL_CODE, | |
1da177e4 LT |
2825 | 0x40, 0x4000, 0x0001, NULL, 0, 3000); |
2826 | ||
5b9ea932 | 2827 | release_firmware(fw); |
1da177e4 LT |
2828 | } |
2829 | ||
2830 | ||
2831 | /**************************************************************************** | |
2832 | * edge_startup | |
2833 | ****************************************************************************/ | |
03f0dbf7 | 2834 | static int edge_startup(struct usb_serial *serial) |
1da177e4 LT |
2835 | { |
2836 | struct edgeport_serial *edge_serial; | |
1da177e4 | 2837 | struct usb_device *dev; |
984f6868 | 2838 | struct device *ddev = &serial->dev->dev; |
c27f3efc | 2839 | int i; |
6e8cf775 | 2840 | int response; |
cb8eaa8b RK |
2841 | bool interrupt_in_found; |
2842 | bool bulk_in_found; | |
2843 | bool bulk_out_found; | |
4f37fa54 JH |
2844 | static const __u32 descriptor[3] = { EDGE_COMPATIBILITY_MASK0, |
2845 | EDGE_COMPATIBILITY_MASK1, | |
2846 | EDGE_COMPATIBILITY_MASK2 }; | |
1da177e4 LT |
2847 | |
2848 | dev = serial->dev; | |
2849 | ||
2850 | /* create our private serial structure */ | |
80b6ca48 | 2851 | edge_serial = kzalloc(sizeof(struct edgeport_serial), GFP_KERNEL); |
10c642d0 | 2852 | if (!edge_serial) |
1da177e4 | 2853 | return -ENOMEM; |
10c642d0 | 2854 | |
1da177e4 LT |
2855 | spin_lock_init(&edge_serial->es_lock); |
2856 | edge_serial->serial = serial; | |
2857 | usb_set_serial_data(serial, edge_serial); | |
2858 | ||
2859 | /* get the name for the device from the device */ | |
f10718f5 | 2860 | i = usb_string(dev, dev->descriptor.iManufacturer, |
ad93375a | 2861 | &edge_serial->name[0], MAX_NAME_LEN+1); |
f10718f5 DC |
2862 | if (i < 0) |
2863 | i = 0; | |
ad93375a | 2864 | edge_serial->name[i++] = ' '; |
f10718f5 | 2865 | usb_string(dev, dev->descriptor.iProduct, |
ad93375a | 2866 | &edge_serial->name[i], MAX_NAME_LEN+2 - i); |
1da177e4 LT |
2867 | |
2868 | dev_info(&serial->dev->dev, "%s detected\n", edge_serial->name); | |
2869 | ||
6e8cf775 | 2870 | /* Read the epic descriptor */ |
e4457d97 | 2871 | if (get_epic_descriptor(edge_serial) < 0) { |
6e8cf775 GKH |
2872 | /* memcpy descriptor to Supports structures */ |
2873 | memcpy(&edge_serial->epic_descriptor.Supports, descriptor, | |
2874 | sizeof(struct edge_compatibility_bits)); | |
1da177e4 | 2875 | |
6e8cf775 | 2876 | /* get the manufacturing descriptor for this device */ |
03f0dbf7 | 2877 | get_manufacturing_desc(edge_serial); |
1da177e4 | 2878 | |
6e8cf775 | 2879 | /* get the boot descriptor */ |
03f0dbf7 | 2880 | get_boot_desc(edge_serial); |
6e8cf775 GKH |
2881 | |
2882 | get_product_info(edge_serial); | |
2883 | } | |
1da177e4 LT |
2884 | |
2885 | /* set the number of ports from the manufacturing description */ | |
2886 | /* serial->num_ports = serial->product_info.NumPorts; */ | |
6e8cf775 GKH |
2887 | if ((!edge_serial->is_epic) && |
2888 | (edge_serial->product_info.NumPorts != serial->num_ports)) { | |
984f6868 GKH |
2889 | dev_warn(ddev, |
2890 | "Device Reported %d serial ports vs. core thinking we have %d ports, email greg@kroah.com this information.\n", | |
6e8cf775 GKH |
2891 | edge_serial->product_info.NumPorts, |
2892 | serial->num_ports); | |
1da177e4 LT |
2893 | } |
2894 | ||
984f6868 | 2895 | dev_dbg(ddev, "%s - time 1 %ld\n", __func__, jiffies); |
1da177e4 | 2896 | |
6e8cf775 GKH |
2897 | /* If not an EPiC device */ |
2898 | if (!edge_serial->is_epic) { | |
2899 | /* now load the application firmware into this device */ | |
03f0dbf7 | 2900 | load_application_firmware(edge_serial); |
1da177e4 | 2901 | |
984f6868 | 2902 | dev_dbg(ddev, "%s - time 2 %ld\n", __func__, jiffies); |
1da177e4 | 2903 | |
6e8cf775 | 2904 | /* Check current Edgeport EEPROM and update if necessary */ |
03f0dbf7 | 2905 | update_edgeport_E2PROM(edge_serial); |
1da177e4 | 2906 | |
984f6868 | 2907 | dev_dbg(ddev, "%s - time 3 %ld\n", __func__, jiffies); |
6e8cf775 GKH |
2908 | |
2909 | /* set the configuration to use #1 */ | |
984f6868 | 2910 | /* dev_dbg(ddev, "set_configuration 1\n"); */ |
03f0dbf7 | 2911 | /* usb_set_configuration (dev, 1); */ |
6e8cf775 | 2912 | } |
984f6868 | 2913 | dev_dbg(ddev, " FirmwareMajorVersion %d.%d.%d\n", |
5b9ea932 JS |
2914 | edge_serial->product_info.FirmwareMajorVersion, |
2915 | edge_serial->product_info.FirmwareMinorVersion, | |
2916 | le16_to_cpu(edge_serial->product_info.FirmwareBuildNumber)); | |
1da177e4 | 2917 | |
03f0dbf7 | 2918 | /* we set up the pointers to the endpoints in the edge_open function, |
1da177e4 LT |
2919 | * as the structures aren't created yet. */ |
2920 | ||
6e8cf775 GKH |
2921 | response = 0; |
2922 | ||
2923 | if (edge_serial->is_epic) { | |
17e80317 JH |
2924 | struct usb_host_interface *alt; |
2925 | ||
2926 | alt = serial->interface->cur_altsetting; | |
2927 | ||
03f0dbf7 AC |
2928 | /* EPIC thing, set up our interrupt polling now and our read |
2929 | * urb, so that the device knows it really is connected. */ | |
cb8eaa8b | 2930 | interrupt_in_found = bulk_in_found = bulk_out_found = false; |
17e80317 | 2931 | for (i = 0; i < alt->desc.bNumEndpoints; ++i) { |
6e8cf775 GKH |
2932 | struct usb_endpoint_descriptor *endpoint; |
2933 | int buffer_size; | |
2934 | ||
17e80317 | 2935 | endpoint = &alt->endpoint[i].desc; |
29cc8897 | 2936 | buffer_size = usb_endpoint_maxp(endpoint); |
cb8eaa8b | 2937 | if (!interrupt_in_found && |
6e8cf775 GKH |
2938 | (usb_endpoint_is_int_in(endpoint))) { |
2939 | /* we found a interrupt in endpoint */ | |
984f6868 | 2940 | dev_dbg(ddev, "found interrupt in\n"); |
6e8cf775 GKH |
2941 | |
2942 | /* not set up yet, so do it now */ | |
03f0dbf7 AC |
2943 | edge_serial->interrupt_read_urb = |
2944 | usb_alloc_urb(0, GFP_KERNEL); | |
c5c0c555 JH |
2945 | if (!edge_serial->interrupt_read_urb) { |
2946 | response = -ENOMEM; | |
2947 | break; | |
2948 | } | |
10c642d0 | 2949 | |
03f0dbf7 AC |
2950 | edge_serial->interrupt_in_buffer = |
2951 | kmalloc(buffer_size, GFP_KERNEL); | |
6e8cf775 | 2952 | if (!edge_serial->interrupt_in_buffer) { |
c5c0c555 JH |
2953 | response = -ENOMEM; |
2954 | break; | |
6e8cf775 | 2955 | } |
03f0dbf7 AC |
2956 | edge_serial->interrupt_in_endpoint = |
2957 | endpoint->bEndpointAddress; | |
6e8cf775 GKH |
2958 | |
2959 | /* set up our interrupt urb */ | |
03f0dbf7 AC |
2960 | usb_fill_int_urb( |
2961 | edge_serial->interrupt_read_urb, | |
2962 | dev, | |
2963 | usb_rcvintpipe(dev, | |
2964 | endpoint->bEndpointAddress), | |
2965 | edge_serial->interrupt_in_buffer, | |
2966 | buffer_size, | |
2967 | edge_interrupt_callback, | |
2968 | edge_serial, | |
2969 | endpoint->bInterval); | |
6e8cf775 | 2970 | |
cb8eaa8b | 2971 | interrupt_in_found = true; |
6e8cf775 GKH |
2972 | } |
2973 | ||
cb8eaa8b | 2974 | if (!bulk_in_found && |
03f0dbf7 | 2975 | (usb_endpoint_is_bulk_in(endpoint))) { |
6e8cf775 | 2976 | /* we found a bulk in endpoint */ |
984f6868 | 2977 | dev_dbg(ddev, "found bulk in\n"); |
6e8cf775 GKH |
2978 | |
2979 | /* not set up yet, so do it now */ | |
03f0dbf7 AC |
2980 | edge_serial->read_urb = |
2981 | usb_alloc_urb(0, GFP_KERNEL); | |
c5c0c555 JH |
2982 | if (!edge_serial->read_urb) { |
2983 | response = -ENOMEM; | |
2984 | break; | |
2985 | } | |
10c642d0 | 2986 | |
03f0dbf7 AC |
2987 | edge_serial->bulk_in_buffer = |
2988 | kmalloc(buffer_size, GFP_KERNEL); | |
6e8cf775 | 2989 | if (!edge_serial->bulk_in_buffer) { |
c5c0c555 JH |
2990 | response = -ENOMEM; |
2991 | break; | |
6e8cf775 | 2992 | } |
03f0dbf7 AC |
2993 | edge_serial->bulk_in_endpoint = |
2994 | endpoint->bEndpointAddress; | |
6e8cf775 GKH |
2995 | |
2996 | /* set up our bulk in urb */ | |
2997 | usb_fill_bulk_urb(edge_serial->read_urb, dev, | |
03f0dbf7 AC |
2998 | usb_rcvbulkpipe(dev, |
2999 | endpoint->bEndpointAddress), | |
3000 | edge_serial->bulk_in_buffer, | |
29cc8897 | 3001 | usb_endpoint_maxp(endpoint), |
03f0dbf7 AC |
3002 | edge_bulk_in_callback, |
3003 | edge_serial); | |
cb8eaa8b | 3004 | bulk_in_found = true; |
6e8cf775 GKH |
3005 | } |
3006 | ||
cb8eaa8b | 3007 | if (!bulk_out_found && |
6e8cf775 GKH |
3008 | (usb_endpoint_is_bulk_out(endpoint))) { |
3009 | /* we found a bulk out endpoint */ | |
984f6868 | 3010 | dev_dbg(ddev, "found bulk out\n"); |
03f0dbf7 AC |
3011 | edge_serial->bulk_out_endpoint = |
3012 | endpoint->bEndpointAddress; | |
cb8eaa8b | 3013 | bulk_out_found = true; |
6e8cf775 GKH |
3014 | } |
3015 | } | |
3016 | ||
c5c0c555 JH |
3017 | if (response || !interrupt_in_found || !bulk_in_found || |
3018 | !bulk_out_found) { | |
3019 | if (!response) { | |
3020 | dev_err(ddev, "expected endpoints not found\n"); | |
3021 | response = -ENODEV; | |
3022 | } | |
3023 | ||
3024 | usb_free_urb(edge_serial->interrupt_read_urb); | |
3025 | kfree(edge_serial->interrupt_in_buffer); | |
3026 | ||
3027 | usb_free_urb(edge_serial->read_urb); | |
3028 | kfree(edge_serial->bulk_in_buffer); | |
3029 | ||
3030 | kfree(edge_serial); | |
3031 | ||
3032 | return response; | |
6e8cf775 GKH |
3033 | } |
3034 | ||
3035 | /* start interrupt read for this edgeport this interrupt will | |
3036 | * continue as long as the edgeport is connected */ | |
03f0dbf7 AC |
3037 | response = usb_submit_urb(edge_serial->interrupt_read_urb, |
3038 | GFP_KERNEL); | |
6e8cf775 | 3039 | if (response) |
984f6868 | 3040 | dev_err(ddev, "%s - Error %d submitting control urb\n", |
194343d9 | 3041 | __func__, response); |
6e8cf775 GKH |
3042 | } |
3043 | return response; | |
1da177e4 LT |
3044 | } |
3045 | ||
3046 | ||
3047 | /**************************************************************************** | |
f9c99bb8 | 3048 | * edge_disconnect |
1da177e4 LT |
3049 | * This function is called whenever the device is removed from the usb bus. |
3050 | ****************************************************************************/ | |
f9c99bb8 | 3051 | static void edge_disconnect(struct usb_serial *serial) |
1da177e4 | 3052 | { |
6e8cf775 | 3053 | struct edgeport_serial *edge_serial = usb_get_serial_data(serial); |
1da177e4 | 3054 | |
6e8cf775 | 3055 | if (edge_serial->is_epic) { |
74ac07e8 | 3056 | usb_kill_urb(edge_serial->interrupt_read_urb); |
74ac07e8 | 3057 | usb_kill_urb(edge_serial->read_urb); |
6e8cf775 | 3058 | } |
f9c99bb8 AS |
3059 | } |
3060 | ||
3061 | ||
3062 | /**************************************************************************** | |
3063 | * edge_release | |
3064 | * This function is called when the device structure is deallocated. | |
3065 | ****************************************************************************/ | |
3066 | static void edge_release(struct usb_serial *serial) | |
3067 | { | |
3068 | struct edgeport_serial *edge_serial = usb_get_serial_data(serial); | |
6e8cf775 | 3069 | |
c8d62957 JH |
3070 | if (edge_serial->is_epic) { |
3071 | usb_kill_urb(edge_serial->interrupt_read_urb); | |
3072 | usb_free_urb(edge_serial->interrupt_read_urb); | |
3073 | kfree(edge_serial->interrupt_in_buffer); | |
3074 | ||
3075 | usb_kill_urb(edge_serial->read_urb); | |
3076 | usb_free_urb(edge_serial->read_urb); | |
3077 | kfree(edge_serial->bulk_in_buffer); | |
3078 | } | |
3079 | ||
6e8cf775 | 3080 | kfree(edge_serial); |
1da177e4 LT |
3081 | } |
3082 | ||
c27f3efc JH |
3083 | static int edge_port_probe(struct usb_serial_port *port) |
3084 | { | |
3085 | struct edgeport_port *edge_port; | |
3086 | ||
3087 | edge_port = kzalloc(sizeof(*edge_port), GFP_KERNEL); | |
3088 | if (!edge_port) | |
3089 | return -ENOMEM; | |
3090 | ||
3091 | spin_lock_init(&edge_port->ep_lock); | |
3092 | edge_port->port = port; | |
3093 | ||
3094 | usb_set_serial_port_data(port, edge_port); | |
3095 | ||
3096 | return 0; | |
3097 | } | |
3098 | ||
3099 | static int edge_port_remove(struct usb_serial_port *port) | |
3100 | { | |
3101 | struct edgeport_port *edge_port; | |
3102 | ||
3103 | edge_port = usb_get_serial_port_data(port); | |
3104 | kfree(edge_port); | |
3105 | ||
3106 | return 0; | |
3107 | } | |
3108 | ||
35d47976 JH |
3109 | static struct usb_serial_driver edgeport_2port_device = { |
3110 | .driver = { | |
3111 | .owner = THIS_MODULE, | |
3112 | .name = "edgeport_2", | |
3113 | }, | |
3114 | .description = "Edgeport 2 port adapter", | |
3115 | .id_table = edgeport_2port_id_table, | |
3116 | .num_ports = 2, | |
fd0c883e JH |
3117 | .num_bulk_in = 1, |
3118 | .num_bulk_out = 1, | |
3119 | .num_interrupt_in = 1, | |
35d47976 JH |
3120 | .open = edge_open, |
3121 | .close = edge_close, | |
3122 | .throttle = edge_throttle, | |
3123 | .unthrottle = edge_unthrottle, | |
3124 | .attach = edge_startup, | |
3125 | .disconnect = edge_disconnect, | |
3126 | .release = edge_release, | |
3127 | .port_probe = edge_port_probe, | |
3128 | .port_remove = edge_port_remove, | |
3129 | .ioctl = edge_ioctl, | |
3130 | .set_termios = edge_set_termios, | |
3131 | .tiocmget = edge_tiocmget, | |
3132 | .tiocmset = edge_tiocmset, | |
3133 | .tiocmiwait = usb_serial_generic_tiocmiwait, | |
3134 | .get_icount = usb_serial_generic_get_icount, | |
3135 | .write = edge_write, | |
3136 | .write_room = edge_write_room, | |
3137 | .chars_in_buffer = edge_chars_in_buffer, | |
3138 | .break_ctl = edge_break, | |
3139 | .read_int_callback = edge_interrupt_callback, | |
3140 | .read_bulk_callback = edge_bulk_in_callback, | |
3141 | .write_bulk_callback = edge_bulk_out_data_callback, | |
3142 | }; | |
3143 | ||
3144 | static struct usb_serial_driver edgeport_4port_device = { | |
3145 | .driver = { | |
3146 | .owner = THIS_MODULE, | |
3147 | .name = "edgeport_4", | |
3148 | }, | |
3149 | .description = "Edgeport 4 port adapter", | |
3150 | .id_table = edgeport_4port_id_table, | |
3151 | .num_ports = 4, | |
fd0c883e JH |
3152 | .num_bulk_in = 1, |
3153 | .num_bulk_out = 1, | |
3154 | .num_interrupt_in = 1, | |
35d47976 JH |
3155 | .open = edge_open, |
3156 | .close = edge_close, | |
3157 | .throttle = edge_throttle, | |
3158 | .unthrottle = edge_unthrottle, | |
3159 | .attach = edge_startup, | |
3160 | .disconnect = edge_disconnect, | |
3161 | .release = edge_release, | |
3162 | .port_probe = edge_port_probe, | |
3163 | .port_remove = edge_port_remove, | |
3164 | .ioctl = edge_ioctl, | |
3165 | .set_termios = edge_set_termios, | |
3166 | .tiocmget = edge_tiocmget, | |
3167 | .tiocmset = edge_tiocmset, | |
3168 | .tiocmiwait = usb_serial_generic_tiocmiwait, | |
3169 | .get_icount = usb_serial_generic_get_icount, | |
3170 | .write = edge_write, | |
3171 | .write_room = edge_write_room, | |
3172 | .chars_in_buffer = edge_chars_in_buffer, | |
3173 | .break_ctl = edge_break, | |
3174 | .read_int_callback = edge_interrupt_callback, | |
3175 | .read_bulk_callback = edge_bulk_in_callback, | |
3176 | .write_bulk_callback = edge_bulk_out_data_callback, | |
3177 | }; | |
3178 | ||
3179 | static struct usb_serial_driver edgeport_8port_device = { | |
3180 | .driver = { | |
3181 | .owner = THIS_MODULE, | |
3182 | .name = "edgeport_8", | |
3183 | }, | |
3184 | .description = "Edgeport 8 port adapter", | |
3185 | .id_table = edgeport_8port_id_table, | |
3186 | .num_ports = 8, | |
fd0c883e JH |
3187 | .num_bulk_in = 1, |
3188 | .num_bulk_out = 1, | |
3189 | .num_interrupt_in = 1, | |
35d47976 JH |
3190 | .open = edge_open, |
3191 | .close = edge_close, | |
3192 | .throttle = edge_throttle, | |
3193 | .unthrottle = edge_unthrottle, | |
3194 | .attach = edge_startup, | |
3195 | .disconnect = edge_disconnect, | |
3196 | .release = edge_release, | |
3197 | .port_probe = edge_port_probe, | |
3198 | .port_remove = edge_port_remove, | |
3199 | .ioctl = edge_ioctl, | |
3200 | .set_termios = edge_set_termios, | |
3201 | .tiocmget = edge_tiocmget, | |
3202 | .tiocmset = edge_tiocmset, | |
3203 | .tiocmiwait = usb_serial_generic_tiocmiwait, | |
3204 | .get_icount = usb_serial_generic_get_icount, | |
3205 | .write = edge_write, | |
3206 | .write_room = edge_write_room, | |
3207 | .chars_in_buffer = edge_chars_in_buffer, | |
3208 | .break_ctl = edge_break, | |
3209 | .read_int_callback = edge_interrupt_callback, | |
3210 | .read_bulk_callback = edge_bulk_in_callback, | |
3211 | .write_bulk_callback = edge_bulk_out_data_callback, | |
3212 | }; | |
3213 | ||
3214 | static struct usb_serial_driver epic_device = { | |
3215 | .driver = { | |
3216 | .owner = THIS_MODULE, | |
3217 | .name = "epic", | |
3218 | }, | |
3219 | .description = "EPiC device", | |
3220 | .id_table = Epic_port_id_table, | |
3221 | .num_ports = 1, | |
fd0c883e JH |
3222 | .num_bulk_in = 1, |
3223 | .num_bulk_out = 1, | |
3224 | .num_interrupt_in = 1, | |
35d47976 JH |
3225 | .open = edge_open, |
3226 | .close = edge_close, | |
3227 | .throttle = edge_throttle, | |
3228 | .unthrottle = edge_unthrottle, | |
3229 | .attach = edge_startup, | |
3230 | .disconnect = edge_disconnect, | |
3231 | .release = edge_release, | |
3232 | .port_probe = edge_port_probe, | |
3233 | .port_remove = edge_port_remove, | |
3234 | .ioctl = edge_ioctl, | |
3235 | .set_termios = edge_set_termios, | |
3236 | .tiocmget = edge_tiocmget, | |
3237 | .tiocmset = edge_tiocmset, | |
3238 | .tiocmiwait = usb_serial_generic_tiocmiwait, | |
3239 | .get_icount = usb_serial_generic_get_icount, | |
3240 | .write = edge_write, | |
3241 | .write_room = edge_write_room, | |
3242 | .chars_in_buffer = edge_chars_in_buffer, | |
3243 | .break_ctl = edge_break, | |
3244 | .read_int_callback = edge_interrupt_callback, | |
3245 | .read_bulk_callback = edge_bulk_in_callback, | |
3246 | .write_bulk_callback = edge_bulk_out_data_callback, | |
3247 | }; | |
3248 | ||
3249 | static struct usb_serial_driver * const serial_drivers[] = { | |
3250 | &edgeport_2port_device, &edgeport_4port_device, | |
3251 | &edgeport_8port_device, &epic_device, NULL | |
3252 | }; | |
3253 | ||
68e24113 | 3254 | module_usb_serial_driver(serial_drivers, id_table_combined); |
1da177e4 | 3255 | |
03f0dbf7 AC |
3256 | MODULE_AUTHOR(DRIVER_AUTHOR); |
3257 | MODULE_DESCRIPTION(DRIVER_DESC); | |
1da177e4 | 3258 | MODULE_LICENSE("GPL"); |
5b9ea932 JS |
3259 | MODULE_FIRMWARE("edgeport/boot.fw"); |
3260 | MODULE_FIRMWARE("edgeport/boot2.fw"); | |
3261 | MODULE_FIRMWARE("edgeport/down.fw"); | |
3262 | MODULE_FIRMWARE("edgeport/down2.fw"); |