]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * KLSI KL5KUSB105 chip RS232 converter driver | |
3 | * | |
4 | * Copyright (C) 2001 Utz-Uwe Haus <haus@uuhaus.de> | |
5 | * | |
6 | * This program is free software; you can redistribute it and/or modify | |
7 | * it under the terms of the GNU General Public License as published by | |
8 | * the Free Software Foundation; either version 2 of the License, or | |
9 | * (at your option) any later version. | |
10 | * | |
11 | * All information about the device was acquired using SniffUSB ans snoopUSB | |
12 | * on Windows98. | |
13 | * It was written out of frustration with the PalmConnect USB Serial adapter | |
14 | * sold by Palm Inc. | |
15 | * Neither Palm, nor their contractor (MCCI) or their supplier (KLSI) provided | |
16 | * information that was not already available. | |
17 | * | |
18 | * It seems that KLSI bought some silicon-design information from ScanLogic, | |
19 | * whose SL11R processor is at the core of the KL5KUSB chipset from KLSI. | |
20 | * KLSI has firmware available for their devices; it is probable that the | |
21 | * firmware differs from that used by KLSI in their products. If you have an | |
22 | * original KLSI device and can provide some information on it, I would be | |
23 | * most interested in adding support for it here. If you have any information | |
24 | * on the protocol used (or find errors in my reverse-engineered stuff), please | |
25 | * let me know. | |
26 | * | |
27 | * The code was only tested with a PalmConnect USB adapter; if you | |
28 | * are adventurous, try it with any KLSI-based device and let me know how it | |
29 | * breaks so that I can fix it! | |
30 | */ | |
31 | ||
32 | /* TODO: | |
33 | * check modem line signals | |
34 | * implement handshaking or decide that we do not support it | |
35 | */ | |
36 | ||
37 | /* History: | |
38 | * 0.3a - implemented pools of write URBs | |
39 | * 0.3 - alpha version for public testing | |
40 | * 0.2 - TIOCMGET works, so autopilot(1) can be used! | |
41 | * 0.1 - can be used to to pilot-xfer -p /dev/ttyUSB0 -l | |
42 | * | |
43 | * The driver skeleton is mainly based on mct_u232.c and various other | |
44 | * pieces of code shamelessly copied from the drivers/usb/serial/ directory. | |
45 | */ | |
46 | ||
47 | ||
48 | #include <linux/config.h> | |
49 | #include <linux/kernel.h> | |
50 | #include <linux/errno.h> | |
51 | #include <linux/init.h> | |
52 | #include <linux/slab.h> | |
53 | #include <linux/tty.h> | |
54 | #include <linux/tty_driver.h> | |
55 | #include <linux/tty_flip.h> | |
56 | #include <linux/module.h> | |
57 | #include <asm/uaccess.h> | |
58 | #include <linux/usb.h> | |
59 | #include "usb-serial.h" | |
60 | #include "kl5kusb105.h" | |
61 | ||
62 | static int debug; | |
63 | ||
64 | /* | |
65 | * Version Information | |
66 | */ | |
67 | #define DRIVER_VERSION "v0.3a" | |
68 | #define DRIVER_AUTHOR "Utz-Uwe Haus <haus@uuhaus.de>" | |
69 | #define DRIVER_DESC "KLSI KL5KUSB105 chipset USB->Serial Converter driver" | |
70 | ||
71 | ||
72 | /* | |
73 | * Function prototypes | |
74 | */ | |
75 | static int klsi_105_startup (struct usb_serial *serial); | |
76 | static void klsi_105_shutdown (struct usb_serial *serial); | |
77 | static int klsi_105_open (struct usb_serial_port *port, | |
78 | struct file *filp); | |
79 | static void klsi_105_close (struct usb_serial_port *port, | |
80 | struct file *filp); | |
81 | static int klsi_105_write (struct usb_serial_port *port, | |
82 | const unsigned char *buf, | |
83 | int count); | |
84 | static void klsi_105_write_bulk_callback (struct urb *urb, struct pt_regs *regs); | |
85 | static int klsi_105_chars_in_buffer (struct usb_serial_port *port); | |
86 | static int klsi_105_write_room (struct usb_serial_port *port); | |
87 | ||
88 | static void klsi_105_read_bulk_callback (struct urb *urb, struct pt_regs *regs); | |
89 | static void klsi_105_set_termios (struct usb_serial_port *port, | |
90 | struct termios * old); | |
91 | static int klsi_105_ioctl (struct usb_serial_port *port, | |
92 | struct file * file, | |
93 | unsigned int cmd, | |
94 | unsigned long arg); | |
95 | static void klsi_105_throttle (struct usb_serial_port *port); | |
96 | static void klsi_105_unthrottle (struct usb_serial_port *port); | |
97 | /* | |
98 | static void klsi_105_break_ctl (struct usb_serial_port *port, | |
99 | int break_state ); | |
100 | */ | |
101 | static int klsi_105_tiocmget (struct usb_serial_port *port, | |
102 | struct file *file); | |
103 | static int klsi_105_tiocmset (struct usb_serial_port *port, | |
104 | struct file *file, unsigned int set, | |
105 | unsigned int clear); | |
106 | ||
107 | /* | |
108 | * All of the device info needed for the KLSI converters. | |
109 | */ | |
110 | static struct usb_device_id id_table [] = { | |
111 | { USB_DEVICE(PALMCONNECT_VID, PALMCONNECT_PID) }, | |
112 | { USB_DEVICE(KLSI_VID, KLSI_KL5KUSB105D_PID) }, | |
113 | { } /* Terminating entry */ | |
114 | }; | |
115 | ||
116 | MODULE_DEVICE_TABLE (usb, id_table); | |
117 | ||
118 | static struct usb_driver kl5kusb105d_driver = { | |
1da177e4 LT |
119 | .name = "kl5kusb105d", |
120 | .probe = usb_serial_probe, | |
121 | .disconnect = usb_serial_disconnect, | |
122 | .id_table = id_table, | |
ba9dc657 | 123 | .no_dynamic_id = 1, |
1da177e4 LT |
124 | }; |
125 | ||
ea65370d | 126 | static struct usb_serial_driver kl5kusb105d_device = { |
18fcac35 GKH |
127 | .driver = { |
128 | .owner = THIS_MODULE, | |
269bda1c | 129 | .name = "kl5kusb105d", |
18fcac35 | 130 | }, |
269bda1c | 131 | .description = "KL5KUSB105D / PalmConnect", |
1da177e4 LT |
132 | .id_table = id_table, |
133 | .num_interrupt_in = 1, | |
134 | .num_bulk_in = 1, | |
135 | .num_bulk_out = 1, | |
136 | .num_ports = 1, | |
137 | .open = klsi_105_open, | |
138 | .close = klsi_105_close, | |
139 | .write = klsi_105_write, | |
140 | .write_bulk_callback = klsi_105_write_bulk_callback, | |
141 | .chars_in_buffer = klsi_105_chars_in_buffer, | |
142 | .write_room = klsi_105_write_room, | |
143 | .read_bulk_callback =klsi_105_read_bulk_callback, | |
144 | .ioctl = klsi_105_ioctl, | |
145 | .set_termios = klsi_105_set_termios, | |
146 | /*.break_ctl = klsi_105_break_ctl,*/ | |
147 | .tiocmget = klsi_105_tiocmget, | |
148 | .tiocmset = klsi_105_tiocmset, | |
149 | .attach = klsi_105_startup, | |
150 | .shutdown = klsi_105_shutdown, | |
151 | .throttle = klsi_105_throttle, | |
152 | .unthrottle = klsi_105_unthrottle, | |
153 | }; | |
154 | ||
155 | struct klsi_105_port_settings { | |
156 | __u8 pktlen; /* always 5, it seems */ | |
157 | __u8 baudrate; | |
158 | __u8 databits; | |
159 | __u8 unknown1; | |
160 | __u8 unknown2; | |
161 | } __attribute__ ((packed)); | |
162 | ||
163 | /* we implement a pool of NUM_URBS urbs per usb_serial */ | |
164 | #define NUM_URBS 1 | |
165 | #define URB_TRANSFER_BUFFER_SIZE 64 | |
166 | struct klsi_105_private { | |
167 | struct klsi_105_port_settings cfg; | |
168 | struct termios termios; | |
169 | unsigned long line_state; /* modem line settings */ | |
170 | /* write pool */ | |
171 | struct urb * write_urb_pool[NUM_URBS]; | |
172 | spinlock_t lock; | |
173 | unsigned long bytes_in; | |
174 | unsigned long bytes_out; | |
175 | }; | |
176 | ||
177 | ||
178 | /* | |
179 | * Handle vendor specific USB requests | |
180 | */ | |
181 | ||
182 | ||
183 | #define KLSI_TIMEOUT 5000 /* default urb timeout */ | |
184 | ||
185 | static int klsi_105_chg_port_settings(struct usb_serial_port *port, | |
186 | struct klsi_105_port_settings *settings) | |
187 | { | |
188 | int rc; | |
189 | ||
190 | rc = usb_control_msg(port->serial->dev, | |
191 | usb_sndctrlpipe(port->serial->dev, 0), | |
192 | KL5KUSB105A_SIO_SET_DATA, | |
193 | USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_INTERFACE, | |
194 | 0, /* value */ | |
195 | 0, /* index */ | |
196 | settings, | |
197 | sizeof(struct klsi_105_port_settings), | |
198 | KLSI_TIMEOUT); | |
199 | if (rc < 0) | |
200 | err("Change port settings failed (error = %d)", rc); | |
201 | info("%s - %d byte block, baudrate %x, databits %d, u1 %d, u2 %d", | |
202 | __FUNCTION__, | |
203 | settings->pktlen, | |
204 | settings->baudrate, settings->databits, | |
205 | settings->unknown1, settings->unknown2); | |
206 | return rc; | |
207 | } /* klsi_105_chg_port_settings */ | |
208 | ||
209 | /* translate a 16-bit status value from the device to linux's TIO bits */ | |
210 | static unsigned long klsi_105_status2linestate(const __u16 status) | |
211 | { | |
212 | unsigned long res = 0; | |
213 | ||
214 | res = ((status & KL5KUSB105A_DSR) ? TIOCM_DSR : 0) | |
215 | | ((status & KL5KUSB105A_CTS) ? TIOCM_CTS : 0) | |
216 | ; | |
217 | ||
218 | return res; | |
219 | } | |
220 | /* | |
221 | * Read line control via vendor command and return result through | |
222 | * *line_state_p | |
223 | */ | |
224 | /* It seems that the status buffer has always only 2 bytes length */ | |
225 | #define KLSI_STATUSBUF_LEN 2 | |
226 | static int klsi_105_get_line_state(struct usb_serial_port *port, | |
227 | unsigned long *line_state_p) | |
228 | { | |
229 | int rc; | |
230 | __u8 status_buf[KLSI_STATUSBUF_LEN] = { -1,-1}; | |
231 | __u16 status; | |
232 | ||
233 | info("%s - sending SIO Poll request", __FUNCTION__); | |
234 | rc = usb_control_msg(port->serial->dev, | |
235 | usb_rcvctrlpipe(port->serial->dev, 0), | |
236 | KL5KUSB105A_SIO_POLL, | |
237 | USB_TYPE_VENDOR | USB_DIR_IN, | |
238 | 0, /* value */ | |
239 | 0, /* index */ | |
240 | status_buf, KLSI_STATUSBUF_LEN, | |
241 | 10000 | |
242 | ); | |
243 | if (rc < 0) | |
244 | err("Reading line status failed (error = %d)", rc); | |
245 | else { | |
246 | status = status_buf[0] + (status_buf[1]<<8); | |
247 | ||
248 | info("%s - read status %x %x", __FUNCTION__, | |
249 | status_buf[0], status_buf[1]); | |
250 | ||
251 | *line_state_p = klsi_105_status2linestate(status); | |
252 | } | |
253 | ||
254 | return rc; | |
255 | } | |
256 | ||
257 | ||
258 | /* | |
259 | * Driver's tty interface functions | |
260 | */ | |
261 | ||
262 | static int klsi_105_startup (struct usb_serial *serial) | |
263 | { | |
264 | struct klsi_105_private *priv; | |
265 | int i; | |
266 | ||
267 | /* check if we support the product id (see keyspan.c) | |
268 | * FIXME | |
269 | */ | |
270 | ||
271 | /* allocate the private data structure */ | |
272 | for (i=0; i<serial->num_ports; i++) { | |
273 | int j; | |
274 | priv = kmalloc(sizeof(struct klsi_105_private), | |
275 | GFP_KERNEL); | |
276 | if (!priv) { | |
277 | dbg("%skmalloc for klsi_105_private failed.", __FUNCTION__); | |
278 | return -ENOMEM; | |
279 | } | |
280 | /* set initial values for control structures */ | |
281 | priv->cfg.pktlen = 5; | |
282 | priv->cfg.baudrate = kl5kusb105a_sio_b9600; | |
283 | priv->cfg.databits = kl5kusb105a_dtb_8; | |
284 | priv->cfg.unknown1 = 0; | |
285 | priv->cfg.unknown2 = 1; | |
286 | ||
287 | priv->line_state = 0; | |
288 | ||
289 | priv->bytes_in = 0; | |
290 | priv->bytes_out = 0; | |
291 | usb_set_serial_port_data(serial->port[i], priv); | |
292 | ||
293 | spin_lock_init (&priv->lock); | |
294 | for (j=0; j<NUM_URBS; j++) { | |
295 | struct urb* urb = usb_alloc_urb(0, GFP_KERNEL); | |
296 | ||
297 | priv->write_urb_pool[j] = urb; | |
298 | if (urb == NULL) { | |
299 | err("No more urbs???"); | |
300 | continue; | |
301 | } | |
302 | ||
303 | urb->transfer_buffer = NULL; | |
304 | urb->transfer_buffer = kmalloc (URB_TRANSFER_BUFFER_SIZE, | |
305 | GFP_KERNEL); | |
306 | if (!urb->transfer_buffer) { | |
307 | err("%s - out of memory for urb buffers.", __FUNCTION__); | |
308 | continue; | |
309 | } | |
310 | } | |
311 | ||
312 | /* priv->termios is left uninitalized until port opening */ | |
313 | init_waitqueue_head(&serial->port[i]->write_wait); | |
314 | } | |
315 | ||
316 | return (0); | |
317 | } /* klsi_105_startup */ | |
318 | ||
319 | ||
320 | static void klsi_105_shutdown (struct usb_serial *serial) | |
321 | { | |
322 | int i; | |
323 | ||
324 | dbg("%s", __FUNCTION__); | |
325 | ||
326 | /* stop reads and writes on all ports */ | |
327 | for (i=0; i < serial->num_ports; ++i) { | |
328 | struct klsi_105_private *priv = usb_get_serial_port_data(serial->port[i]); | |
329 | unsigned long flags; | |
330 | ||
331 | if (priv) { | |
332 | /* kill our write urb pool */ | |
333 | int j; | |
334 | struct urb **write_urbs = priv->write_urb_pool; | |
335 | spin_lock_irqsave(&priv->lock,flags); | |
336 | ||
337 | for (j = 0; j < NUM_URBS; j++) { | |
338 | if (write_urbs[j]) { | |
339 | /* FIXME - uncomment the following | |
340 | * usb_kill_urb call when the host | |
341 | * controllers get fixed to set | |
342 | * urb->dev = NULL after the urb is | |
343 | * finished. Otherwise this call | |
344 | * oopses. */ | |
345 | /* usb_kill_urb(write_urbs[j]); */ | |
1bc3c9e1 | 346 | kfree(write_urbs[j]->transfer_buffer); |
1da177e4 LT |
347 | usb_free_urb (write_urbs[j]); |
348 | } | |
349 | } | |
350 | ||
351 | spin_unlock_irqrestore (&priv->lock, flags); | |
352 | ||
353 | kfree(priv); | |
354 | usb_set_serial_port_data(serial->port[i], NULL); | |
355 | } | |
356 | } | |
357 | } /* klsi_105_shutdown */ | |
358 | ||
359 | static int klsi_105_open (struct usb_serial_port *port, struct file *filp) | |
360 | { | |
361 | struct klsi_105_private *priv = usb_get_serial_port_data(port); | |
362 | int retval = 0; | |
363 | int rc; | |
364 | int i; | |
365 | unsigned long line_state; | |
366 | struct klsi_105_port_settings cfg; | |
367 | unsigned long flags; | |
368 | ||
369 | dbg("%s port %d", __FUNCTION__, port->number); | |
370 | ||
371 | /* force low_latency on so that our tty_push actually forces | |
372 | * the data through | |
373 | * port->tty->low_latency = 1; */ | |
374 | ||
375 | /* Do a defined restart: | |
376 | * Set up sane default baud rate and send the 'READ_ON' | |
377 | * vendor command. | |
378 | * FIXME: set modem line control (how?) | |
379 | * Then read the modem line control and store values in | |
380 | * priv->line_state. | |
381 | */ | |
382 | cfg.pktlen = 5; | |
383 | cfg.baudrate = kl5kusb105a_sio_b9600; | |
384 | cfg.databits = kl5kusb105a_dtb_8; | |
385 | cfg.unknown1 = 0; | |
386 | cfg.unknown2 = 1; | |
387 | klsi_105_chg_port_settings(port, &cfg); | |
388 | ||
389 | /* set up termios structure */ | |
390 | spin_lock_irqsave (&priv->lock, flags); | |
391 | priv->termios.c_iflag = port->tty->termios->c_iflag; | |
392 | priv->termios.c_oflag = port->tty->termios->c_oflag; | |
393 | priv->termios.c_cflag = port->tty->termios->c_cflag; | |
394 | priv->termios.c_lflag = port->tty->termios->c_lflag; | |
395 | for (i=0; i<NCCS; i++) | |
396 | priv->termios.c_cc[i] = port->tty->termios->c_cc[i]; | |
397 | priv->cfg.pktlen = cfg.pktlen; | |
398 | priv->cfg.baudrate = cfg.baudrate; | |
399 | priv->cfg.databits = cfg.databits; | |
400 | priv->cfg.unknown1 = cfg.unknown1; | |
401 | priv->cfg.unknown2 = cfg.unknown2; | |
402 | spin_unlock_irqrestore (&priv->lock, flags); | |
403 | ||
404 | /* READ_ON and urb submission */ | |
405 | usb_fill_bulk_urb(port->read_urb, port->serial->dev, | |
406 | usb_rcvbulkpipe(port->serial->dev, | |
407 | port->bulk_in_endpointAddress), | |
408 | port->read_urb->transfer_buffer, | |
409 | port->read_urb->transfer_buffer_length, | |
410 | klsi_105_read_bulk_callback, | |
411 | port); | |
412 | ||
413 | rc = usb_submit_urb(port->read_urb, GFP_KERNEL); | |
414 | if (rc) { | |
415 | err("%s - failed submitting read urb, error %d", __FUNCTION__, rc); | |
416 | retval = rc; | |
417 | goto exit; | |
418 | } | |
419 | ||
420 | rc = usb_control_msg(port->serial->dev, | |
421 | usb_sndctrlpipe(port->serial->dev,0), | |
422 | KL5KUSB105A_SIO_CONFIGURE, | |
423 | USB_TYPE_VENDOR|USB_DIR_OUT|USB_RECIP_INTERFACE, | |
424 | KL5KUSB105A_SIO_CONFIGURE_READ_ON, | |
425 | 0, /* index */ | |
426 | NULL, | |
427 | 0, | |
428 | KLSI_TIMEOUT); | |
429 | if (rc < 0) { | |
430 | err("Enabling read failed (error = %d)", rc); | |
431 | retval = rc; | |
432 | } else | |
433 | dbg("%s - enabled reading", __FUNCTION__); | |
434 | ||
435 | rc = klsi_105_get_line_state(port, &line_state); | |
436 | if (rc >= 0) { | |
437 | spin_lock_irqsave (&priv->lock, flags); | |
438 | priv->line_state = line_state; | |
439 | spin_unlock_irqrestore (&priv->lock, flags); | |
440 | dbg("%s - read line state 0x%lx", __FUNCTION__, line_state); | |
441 | retval = 0; | |
442 | } else | |
443 | retval = rc; | |
444 | ||
445 | exit: | |
446 | return retval; | |
447 | } /* klsi_105_open */ | |
448 | ||
449 | ||
450 | static void klsi_105_close (struct usb_serial_port *port, struct file *filp) | |
451 | { | |
452 | struct klsi_105_private *priv = usb_get_serial_port_data(port); | |
453 | int rc; | |
454 | ||
455 | dbg("%s port %d", __FUNCTION__, port->number); | |
456 | ||
457 | /* send READ_OFF */ | |
458 | rc = usb_control_msg (port->serial->dev, | |
459 | usb_sndctrlpipe(port->serial->dev, 0), | |
460 | KL5KUSB105A_SIO_CONFIGURE, | |
461 | USB_TYPE_VENDOR | USB_DIR_OUT, | |
462 | KL5KUSB105A_SIO_CONFIGURE_READ_OFF, | |
463 | 0, /* index */ | |
464 | NULL, 0, | |
465 | KLSI_TIMEOUT); | |
466 | if (rc < 0) | |
467 | err("Disabling read failed (error = %d)", rc); | |
468 | ||
469 | /* shutdown our bulk reads and writes */ | |
470 | usb_kill_urb(port->write_urb); | |
471 | usb_kill_urb(port->read_urb); | |
472 | /* unlink our write pool */ | |
473 | /* FIXME */ | |
474 | /* wgg - do I need this? I think so. */ | |
475 | usb_kill_urb(port->interrupt_in_urb); | |
476 | info("kl5kusb105 port stats: %ld bytes in, %ld bytes out", priv->bytes_in, priv->bytes_out); | |
477 | } /* klsi_105_close */ | |
478 | ||
479 | ||
480 | /* We need to write a complete 64-byte data block and encode the | |
481 | * number actually sent in the first double-byte, LSB-order. That | |
482 | * leaves at most 62 bytes of payload. | |
483 | */ | |
484 | #define KLSI_105_DATA_OFFSET 2 /* in the bulk urb data block */ | |
485 | ||
486 | ||
487 | static int klsi_105_write (struct usb_serial_port *port, | |
488 | const unsigned char *buf, int count) | |
489 | { | |
490 | struct klsi_105_private *priv = usb_get_serial_port_data(port); | |
491 | int result, size; | |
492 | int bytes_sent=0; | |
493 | ||
494 | dbg("%s - port %d", __FUNCTION__, port->number); | |
495 | ||
496 | while (count > 0) { | |
497 | /* try to find a free urb (write 0 bytes if none) */ | |
498 | struct urb *urb = NULL; | |
499 | unsigned long flags; | |
500 | int i; | |
501 | /* since the pool is per-port we might not need the spin lock !? */ | |
502 | spin_lock_irqsave (&priv->lock, flags); | |
503 | for (i=0; i<NUM_URBS; i++) { | |
504 | if (priv->write_urb_pool[i]->status != -EINPROGRESS) { | |
505 | urb = priv->write_urb_pool[i]; | |
506 | dbg("%s - using pool URB %d", __FUNCTION__, i); | |
507 | break; | |
508 | } | |
509 | } | |
510 | spin_unlock_irqrestore (&priv->lock, flags); | |
511 | ||
512 | if (urb==NULL) { | |
513 | dbg("%s - no more free urbs", __FUNCTION__); | |
514 | goto exit; | |
515 | } | |
516 | ||
517 | if (urb->transfer_buffer == NULL) { | |
518 | urb->transfer_buffer = kmalloc (URB_TRANSFER_BUFFER_SIZE, GFP_ATOMIC); | |
519 | if (urb->transfer_buffer == NULL) { | |
520 | err("%s - no more kernel memory...", __FUNCTION__); | |
521 | goto exit; | |
522 | } | |
523 | } | |
524 | ||
525 | size = min (count, port->bulk_out_size - KLSI_105_DATA_OFFSET); | |
526 | size = min (size, URB_TRANSFER_BUFFER_SIZE - KLSI_105_DATA_OFFSET); | |
527 | ||
528 | memcpy (urb->transfer_buffer + KLSI_105_DATA_OFFSET, buf, size); | |
529 | ||
530 | /* write payload size into transfer buffer */ | |
531 | ((__u8 *)urb->transfer_buffer)[0] = (__u8) (size & 0xFF); | |
532 | ((__u8 *)urb->transfer_buffer)[1] = (__u8) ((size & 0xFF00)>>8); | |
533 | ||
534 | /* set up our urb */ | |
535 | usb_fill_bulk_urb(urb, port->serial->dev, | |
536 | usb_sndbulkpipe(port->serial->dev, | |
537 | port->bulk_out_endpointAddress), | |
538 | urb->transfer_buffer, | |
539 | URB_TRANSFER_BUFFER_SIZE, | |
540 | klsi_105_write_bulk_callback, | |
541 | port); | |
542 | ||
543 | /* send the data out the bulk port */ | |
544 | result = usb_submit_urb(urb, GFP_ATOMIC); | |
545 | if (result) { | |
546 | err("%s - failed submitting write urb, error %d", __FUNCTION__, result); | |
547 | goto exit; | |
548 | } | |
549 | buf += size; | |
550 | bytes_sent += size; | |
551 | count -= size; | |
552 | } | |
553 | exit: | |
554 | /* lockless, but it's for debug info only... */ | |
555 | priv->bytes_out+=bytes_sent; | |
556 | ||
557 | return bytes_sent; /* that's how much we wrote */ | |
558 | } /* klsi_105_write */ | |
559 | ||
560 | static void klsi_105_write_bulk_callback ( struct urb *urb, struct pt_regs *regs) | |
561 | { | |
562 | struct usb_serial_port *port = (struct usb_serial_port *)urb->context; | |
563 | ||
564 | dbg("%s - port %d", __FUNCTION__, port->number); | |
565 | ||
566 | if (urb->status) { | |
567 | dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, | |
568 | urb->status); | |
569 | return; | |
570 | } | |
571 | ||
cf2c7481 | 572 | usb_serial_port_softint(port); |
1da177e4 LT |
573 | } /* klsi_105_write_bulk_completion_callback */ |
574 | ||
575 | ||
576 | /* return number of characters currently in the writing process */ | |
577 | static int klsi_105_chars_in_buffer (struct usb_serial_port *port) | |
578 | { | |
579 | int chars = 0; | |
580 | int i; | |
581 | unsigned long flags; | |
582 | struct klsi_105_private *priv = usb_get_serial_port_data(port); | |
583 | ||
584 | spin_lock_irqsave (&priv->lock, flags); | |
585 | ||
586 | for (i = 0; i < NUM_URBS; ++i) { | |
587 | if (priv->write_urb_pool[i]->status == -EINPROGRESS) { | |
588 | chars += URB_TRANSFER_BUFFER_SIZE; | |
589 | } | |
590 | } | |
591 | ||
592 | spin_unlock_irqrestore (&priv->lock, flags); | |
593 | ||
594 | dbg("%s - returns %d", __FUNCTION__, chars); | |
595 | return (chars); | |
596 | } | |
597 | ||
598 | static int klsi_105_write_room (struct usb_serial_port *port) | |
599 | { | |
600 | unsigned long flags; | |
601 | int i; | |
602 | int room = 0; | |
603 | struct klsi_105_private *priv = usb_get_serial_port_data(port); | |
604 | ||
605 | spin_lock_irqsave (&priv->lock, flags); | |
606 | for (i = 0; i < NUM_URBS; ++i) { | |
607 | if (priv->write_urb_pool[i]->status != -EINPROGRESS) { | |
608 | room += URB_TRANSFER_BUFFER_SIZE; | |
609 | } | |
610 | } | |
611 | ||
612 | spin_unlock_irqrestore (&priv->lock, flags); | |
613 | ||
614 | dbg("%s - returns %d", __FUNCTION__, room); | |
615 | return (room); | |
616 | } | |
617 | ||
618 | ||
619 | ||
620 | static void klsi_105_read_bulk_callback (struct urb *urb, struct pt_regs *regs) | |
621 | { | |
622 | struct usb_serial_port *port = (struct usb_serial_port *)urb->context; | |
623 | struct klsi_105_private *priv = usb_get_serial_port_data(port); | |
624 | struct tty_struct *tty; | |
625 | unsigned char *data = urb->transfer_buffer; | |
626 | int rc; | |
627 | ||
628 | dbg("%s - port %d", __FUNCTION__, port->number); | |
629 | ||
630 | /* The urb might have been killed. */ | |
631 | if (urb->status) { | |
632 | dbg("%s - nonzero read bulk status received: %d", __FUNCTION__, | |
633 | urb->status); | |
634 | return; | |
635 | } | |
636 | ||
637 | /* The data received is again preceded by a length double-byte in LSB- | |
638 | * first order (see klsi_105_write() ) | |
639 | */ | |
640 | if (urb->actual_length == 0) { | |
641 | /* empty urbs seem to happen, we ignore them */ | |
642 | /* dbg("%s - emtpy URB", __FUNCTION__); */ | |
643 | ; | |
644 | } else if (urb->actual_length <= 2) { | |
645 | dbg("%s - size %d URB not understood", __FUNCTION__, | |
646 | urb->actual_length); | |
647 | usb_serial_debug_data(debug, &port->dev, __FUNCTION__, | |
648 | urb->actual_length, data); | |
649 | } else { | |
1da177e4 LT |
650 | int bytes_sent = ((__u8 *) data)[0] + |
651 | ((unsigned int) ((__u8 *) data)[1] << 8); | |
652 | tty = port->tty; | |
653 | /* we should immediately resubmit the URB, before attempting | |
654 | * to pass the data on to the tty layer. But that needs locking | |
655 | * against re-entry an then mixed-up data because of | |
656 | * intermixed tty_flip_buffer_push()s | |
657 | * FIXME | |
658 | */ | |
659 | usb_serial_debug_data(debug, &port->dev, __FUNCTION__, | |
660 | urb->actual_length, data); | |
661 | ||
662 | if (bytes_sent + 2 > urb->actual_length) { | |
663 | dbg("%s - trying to read more data than available" | |
664 | " (%d vs. %d)", __FUNCTION__, | |
665 | bytes_sent+2, urb->actual_length); | |
666 | /* cap at implied limit */ | |
667 | bytes_sent = urb->actual_length - 2; | |
668 | } | |
669 | ||
33f0f88f AC |
670 | tty_buffer_request_room(tty, bytes_sent); |
671 | tty_insert_flip_string(tty, data + 2, bytes_sent); | |
1da177e4 LT |
672 | tty_flip_buffer_push(tty); |
673 | ||
674 | /* again lockless, but debug info only */ | |
675 | priv->bytes_in += bytes_sent; | |
676 | } | |
677 | /* Continue trying to always read */ | |
678 | usb_fill_bulk_urb(port->read_urb, port->serial->dev, | |
679 | usb_rcvbulkpipe(port->serial->dev, | |
680 | port->bulk_in_endpointAddress), | |
681 | port->read_urb->transfer_buffer, | |
682 | port->read_urb->transfer_buffer_length, | |
683 | klsi_105_read_bulk_callback, | |
684 | port); | |
685 | rc = usb_submit_urb(port->read_urb, GFP_ATOMIC); | |
686 | if (rc) | |
687 | err("%s - failed resubmitting read urb, error %d", __FUNCTION__, rc); | |
688 | } /* klsi_105_read_bulk_callback */ | |
689 | ||
690 | ||
691 | static void klsi_105_set_termios (struct usb_serial_port *port, | |
692 | struct termios *old_termios) | |
693 | { | |
694 | struct klsi_105_private *priv = usb_get_serial_port_data(port); | |
695 | unsigned int iflag = port->tty->termios->c_iflag; | |
696 | unsigned int old_iflag = old_termios->c_iflag; | |
697 | unsigned int cflag = port->tty->termios->c_cflag; | |
698 | unsigned int old_cflag = old_termios->c_cflag; | |
699 | struct klsi_105_port_settings cfg; | |
700 | unsigned long flags; | |
701 | ||
702 | /* lock while we are modifying the settings */ | |
703 | spin_lock_irqsave (&priv->lock, flags); | |
704 | ||
705 | /* | |
706 | * Update baud rate | |
707 | */ | |
708 | if( (cflag & CBAUD) != (old_cflag & CBAUD) ) { | |
709 | /* reassert DTR and (maybe) RTS on transition from B0 */ | |
710 | if( (old_cflag & CBAUD) == B0 ) { | |
711 | dbg("%s: baud was B0", __FUNCTION__); | |
712 | #if 0 | |
713 | priv->control_state |= TIOCM_DTR; | |
714 | /* don't set RTS if using hardware flow control */ | |
715 | if (!(old_cflag & CRTSCTS)) { | |
716 | priv->control_state |= TIOCM_RTS; | |
717 | } | |
718 | mct_u232_set_modem_ctrl(serial, priv->control_state); | |
719 | #endif | |
720 | } | |
721 | ||
722 | switch(cflag & CBAUD) { | |
723 | case B0: /* handled below */ | |
724 | break; | |
725 | case B1200: priv->cfg.baudrate = kl5kusb105a_sio_b1200; | |
726 | break; | |
727 | case B2400: priv->cfg.baudrate = kl5kusb105a_sio_b2400; | |
728 | break; | |
729 | case B4800: priv->cfg.baudrate = kl5kusb105a_sio_b4800; | |
730 | break; | |
731 | case B9600: priv->cfg.baudrate = kl5kusb105a_sio_b9600; | |
732 | break; | |
733 | case B19200: priv->cfg.baudrate = kl5kusb105a_sio_b19200; | |
734 | break; | |
735 | case B38400: priv->cfg.baudrate = kl5kusb105a_sio_b38400; | |
736 | break; | |
737 | case B57600: priv->cfg.baudrate = kl5kusb105a_sio_b57600; | |
738 | break; | |
739 | case B115200: priv->cfg.baudrate = kl5kusb105a_sio_b115200; | |
740 | break; | |
741 | default: | |
742 | err("KLSI USB->Serial converter:" | |
743 | " unsupported baudrate request, using default" | |
744 | " of 9600"); | |
745 | priv->cfg.baudrate = kl5kusb105a_sio_b9600; | |
746 | break; | |
747 | } | |
748 | if ((cflag & CBAUD) == B0 ) { | |
749 | dbg("%s: baud is B0", __FUNCTION__); | |
750 | /* Drop RTS and DTR */ | |
751 | /* maybe this should be simulated by sending read | |
752 | * disable and read enable messages? | |
753 | */ | |
754 | ; | |
755 | #if 0 | |
756 | priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS); | |
757 | mct_u232_set_modem_ctrl(serial, priv->control_state); | |
758 | #endif | |
759 | } | |
760 | } | |
761 | ||
762 | if ((cflag & CSIZE) != (old_cflag & CSIZE)) { | |
763 | /* set the number of data bits */ | |
764 | switch (cflag & CSIZE) { | |
765 | case CS5: | |
766 | dbg("%s - 5 bits/byte not supported", __FUNCTION__); | |
767 | spin_unlock_irqrestore (&priv->lock, flags); | |
768 | return ; | |
769 | case CS6: | |
770 | dbg("%s - 6 bits/byte not supported", __FUNCTION__); | |
771 | spin_unlock_irqrestore (&priv->lock, flags); | |
772 | return ; | |
773 | case CS7: | |
774 | priv->cfg.databits = kl5kusb105a_dtb_7; | |
775 | break; | |
776 | case CS8: | |
777 | priv->cfg.databits = kl5kusb105a_dtb_8; | |
778 | break; | |
779 | default: | |
780 | err("CSIZE was not CS5-CS8, using default of 8"); | |
781 | priv->cfg.databits = kl5kusb105a_dtb_8; | |
782 | break; | |
783 | } | |
784 | } | |
785 | ||
786 | /* | |
787 | * Update line control register (LCR) | |
788 | */ | |
789 | if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD)) | |
790 | || (cflag & CSTOPB) != (old_cflag & CSTOPB) ) { | |
791 | ||
792 | #if 0 | |
793 | priv->last_lcr = 0; | |
794 | ||
795 | /* set the parity */ | |
796 | if (cflag & PARENB) | |
797 | priv->last_lcr |= (cflag & PARODD) ? | |
798 | MCT_U232_PARITY_ODD : MCT_U232_PARITY_EVEN; | |
799 | else | |
800 | priv->last_lcr |= MCT_U232_PARITY_NONE; | |
801 | ||
802 | /* set the number of stop bits */ | |
803 | priv->last_lcr |= (cflag & CSTOPB) ? | |
804 | MCT_U232_STOP_BITS_2 : MCT_U232_STOP_BITS_1; | |
805 | ||
806 | mct_u232_set_line_ctrl(serial, priv->last_lcr); | |
807 | #endif | |
808 | ; | |
809 | } | |
810 | ||
811 | /* | |
812 | * Set flow control: well, I do not really now how to handle DTR/RTS. | |
813 | * Just do what we have seen with SniffUSB on Win98. | |
814 | */ | |
815 | if( (iflag & IXOFF) != (old_iflag & IXOFF) | |
816 | || (iflag & IXON) != (old_iflag & IXON) | |
817 | || (cflag & CRTSCTS) != (old_cflag & CRTSCTS) ) { | |
818 | ||
819 | /* Drop DTR/RTS if no flow control otherwise assert */ | |
820 | #if 0 | |
821 | if ((iflag & IXOFF) || (iflag & IXON) || (cflag & CRTSCTS) ) | |
822 | priv->control_state |= TIOCM_DTR | TIOCM_RTS; | |
823 | else | |
824 | priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS); | |
825 | mct_u232_set_modem_ctrl(serial, priv->control_state); | |
826 | #endif | |
827 | ; | |
828 | } | |
829 | memcpy (&cfg, &priv->cfg, sizeof(cfg)); | |
830 | spin_unlock_irqrestore (&priv->lock, flags); | |
831 | ||
832 | /* now commit changes to device */ | |
833 | klsi_105_chg_port_settings(port, &cfg); | |
834 | } /* klsi_105_set_termios */ | |
835 | ||
836 | ||
837 | #if 0 | |
838 | static void mct_u232_break_ctl( struct usb_serial_port *port, int break_state ) | |
839 | { | |
840 | struct usb_serial *serial = port->serial; | |
841 | struct mct_u232_private *priv = (struct mct_u232_private *)port->private; | |
842 | unsigned char lcr = priv->last_lcr; | |
843 | ||
844 | dbg("%sstate=%d", __FUNCTION__, break_state); | |
845 | ||
846 | if (break_state) | |
847 | lcr |= MCT_U232_SET_BREAK; | |
848 | ||
849 | mct_u232_set_line_ctrl(serial, lcr); | |
850 | } /* mct_u232_break_ctl */ | |
851 | #endif | |
852 | ||
853 | static int klsi_105_tiocmget (struct usb_serial_port *port, struct file *file) | |
854 | { | |
855 | struct klsi_105_private *priv = usb_get_serial_port_data(port); | |
856 | unsigned long flags; | |
857 | int rc; | |
858 | unsigned long line_state; | |
859 | dbg("%s - request, just guessing", __FUNCTION__); | |
860 | ||
861 | rc = klsi_105_get_line_state(port, &line_state); | |
862 | if (rc < 0) { | |
863 | err("Reading line control failed (error = %d)", rc); | |
864 | /* better return value? EAGAIN? */ | |
865 | return rc; | |
866 | } | |
867 | ||
868 | spin_lock_irqsave (&priv->lock, flags); | |
869 | priv->line_state = line_state; | |
870 | spin_unlock_irqrestore (&priv->lock, flags); | |
871 | dbg("%s - read line state 0x%lx", __FUNCTION__, line_state); | |
872 | return (int)line_state; | |
873 | } | |
874 | ||
875 | static int klsi_105_tiocmset (struct usb_serial_port *port, struct file *file, | |
876 | unsigned int set, unsigned int clear) | |
877 | { | |
878 | int retval = -EINVAL; | |
879 | ||
880 | dbg("%s", __FUNCTION__); | |
881 | ||
882 | /* if this ever gets implemented, it should be done something like this: | |
883 | struct usb_serial *serial = port->serial; | |
884 | struct klsi_105_private *priv = usb_get_serial_port_data(port); | |
885 | unsigned long flags; | |
886 | int control; | |
887 | ||
888 | spin_lock_irqsave (&priv->lock, flags); | |
889 | if (set & TIOCM_RTS) | |
890 | priv->control_state |= TIOCM_RTS; | |
891 | if (set & TIOCM_DTR) | |
892 | priv->control_state |= TIOCM_DTR; | |
893 | if (clear & TIOCM_RTS) | |
894 | priv->control_state &= ~TIOCM_RTS; | |
895 | if (clear & TIOCM_DTR) | |
896 | priv->control_state &= ~TIOCM_DTR; | |
897 | control = priv->control_state; | |
898 | spin_unlock_irqrestore (&priv->lock, flags); | |
899 | retval = mct_u232_set_modem_ctrl(serial, control); | |
900 | */ | |
901 | return retval; | |
902 | } | |
903 | ||
904 | static int klsi_105_ioctl (struct usb_serial_port *port, struct file * file, | |
905 | unsigned int cmd, unsigned long arg) | |
906 | { | |
907 | struct klsi_105_private *priv = usb_get_serial_port_data(port); | |
908 | void __user *user_arg = (void __user *)arg; | |
909 | ||
910 | dbg("%scmd=0x%x", __FUNCTION__, cmd); | |
911 | ||
912 | /* Based on code from acm.c and others */ | |
913 | switch (cmd) { | |
914 | case TIOCMIWAIT: | |
915 | /* wait for any of the 4 modem inputs (DCD,RI,DSR,CTS)*/ | |
916 | /* TODO */ | |
917 | dbg("%s - TIOCMIWAIT not handled", __FUNCTION__); | |
918 | return -ENOIOCTLCMD; | |
919 | case TIOCGICOUNT: | |
920 | /* return count of modemline transitions */ | |
921 | /* TODO */ | |
922 | dbg("%s - TIOCGICOUNT not handled", __FUNCTION__); | |
923 | return -ENOIOCTLCMD; | |
924 | case TCGETS: | |
925 | /* return current info to caller */ | |
926 | dbg("%s - TCGETS data faked/incomplete", __FUNCTION__); | |
927 | ||
928 | if (!access_ok(VERIFY_WRITE, user_arg, sizeof(struct termios))) | |
929 | return -EFAULT; | |
930 | ||
931 | if (kernel_termios_to_user_termios((struct termios __user *)arg, | |
932 | &priv->termios)) | |
933 | return -EFAULT; | |
934 | return 0; | |
935 | case TCSETS: | |
936 | /* set port termios to the one given by the user */ | |
937 | dbg("%s - TCSETS not handled", __FUNCTION__); | |
938 | ||
939 | if (!access_ok(VERIFY_READ, user_arg, sizeof(struct termios))) | |
940 | return -EFAULT; | |
941 | ||
942 | if (user_termios_to_kernel_termios(&priv->termios, | |
943 | (struct termios __user *)arg)) | |
944 | return -EFAULT; | |
945 | klsi_105_set_termios(port, &priv->termios); | |
946 | return 0; | |
947 | case TCSETSW: { | |
948 | /* set port termios and try to wait for completion of last | |
949 | * write operation */ | |
950 | /* We guess here. If there are not too many write urbs | |
951 | * outstanding, we lie. */ | |
952 | /* what is the right way to wait here? schedule() ? */ | |
953 | /* | |
954 | while (klsi_105_chars_in_buffer(port) > (NUM_URBS / 4 ) * URB_TRANSFER_BUFFER_SIZE) | |
955 | schedule(); | |
956 | */ | |
957 | return -ENOIOCTLCMD; | |
958 | } | |
959 | default: | |
960 | dbg("%s: arg not supported - 0x%04x", __FUNCTION__,cmd); | |
961 | return(-ENOIOCTLCMD); | |
962 | break; | |
963 | } | |
964 | return 0; | |
965 | } /* klsi_105_ioctl */ | |
966 | ||
967 | static void klsi_105_throttle (struct usb_serial_port *port) | |
968 | { | |
969 | dbg("%s - port %d", __FUNCTION__, port->number); | |
970 | usb_kill_urb(port->read_urb); | |
971 | } | |
972 | ||
973 | static void klsi_105_unthrottle (struct usb_serial_port *port) | |
974 | { | |
975 | int result; | |
976 | ||
977 | dbg("%s - port %d", __FUNCTION__, port->number); | |
978 | ||
979 | port->read_urb->dev = port->serial->dev; | |
980 | result = usb_submit_urb(port->read_urb, GFP_ATOMIC); | |
981 | if (result) | |
982 | err("%s - failed submitting read urb, error %d", __FUNCTION__, | |
983 | result); | |
984 | } | |
985 | ||
986 | ||
987 | ||
988 | static int __init klsi_105_init (void) | |
989 | { | |
990 | int retval; | |
991 | retval = usb_serial_register(&kl5kusb105d_device); | |
992 | if (retval) | |
993 | goto failed_usb_serial_register; | |
994 | retval = usb_register(&kl5kusb105d_driver); | |
995 | if (retval) | |
996 | goto failed_usb_register; | |
997 | ||
998 | info(DRIVER_DESC " " DRIVER_VERSION); | |
999 | return 0; | |
1000 | failed_usb_register: | |
1001 | usb_serial_deregister(&kl5kusb105d_device); | |
1002 | failed_usb_serial_register: | |
1003 | return retval; | |
1004 | } | |
1005 | ||
1006 | ||
1007 | static void __exit klsi_105_exit (void) | |
1008 | { | |
1009 | usb_deregister (&kl5kusb105d_driver); | |
1010 | usb_serial_deregister (&kl5kusb105d_device); | |
1011 | } | |
1012 | ||
1013 | ||
1014 | module_init (klsi_105_init); | |
1015 | module_exit (klsi_105_exit); | |
1016 | ||
1017 | MODULE_AUTHOR( DRIVER_AUTHOR ); | |
1018 | MODULE_DESCRIPTION( DRIVER_DESC ); | |
1019 | MODULE_LICENSE("GPL"); | |
1020 | ||
1021 | ||
1022 | module_param(debug, bool, S_IRUGO | S_IWUSR); | |
1023 | MODULE_PARM_DESC(debug, "enable extensive debugging messages"); | |
1024 | ||
1025 | /* vim: set sts=8 ts=8 sw=8: */ |