]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* vi: ts=8 sw=8 |
2 | * | |
3 | * TI 3410/5052 USB Serial Driver | |
4 | * | |
5 | * Copyright (C) 2004 Texas Instruments | |
6 | * | |
7 | * This driver is based on the Linux io_ti driver, which is | |
8 | * Copyright (C) 2000-2002 Inside Out Networks | |
9 | * Copyright (C) 2001-2002 Greg Kroah-Hartman | |
10 | * | |
11 | * This program is free software; you can redistribute it and/or modify | |
12 | * it under the terms of the GNU General Public License as published by | |
13 | * the Free Software Foundation; either version 2 of the License, or | |
14 | * (at your option) any later version. | |
15 | * | |
16 | * For questions or problems with this driver, contact Texas Instruments | |
17 | * technical support, or Al Borchers <alborchers@steinerpoint.com>, or | |
18 | * Peter Berger <pberger@brimson.com>. | |
19 | * | |
20 | * This driver needs this hotplug script in /etc/hotplug/usb/ti_usb_3410_5052 | |
21 | * or in /etc/hotplug.d/usb/ti_usb_3410_5052.hotplug to set the device | |
22 | * configuration. | |
23 | * | |
24 | * #!/bin/bash | |
25 | * | |
26 | * BOOT_CONFIG=1 | |
27 | * ACTIVE_CONFIG=2 | |
28 | * | |
29 | * if [[ "$ACTION" != "add" ]] | |
30 | * then | |
31 | * exit | |
32 | * fi | |
33 | * | |
34 | * CONFIG_PATH=/sys${DEVPATH%/?*}/bConfigurationValue | |
35 | * | |
36 | * if [[ 0`cat $CONFIG_PATH` -ne $BOOT_CONFIG ]] | |
37 | * then | |
38 | * exit | |
39 | * fi | |
40 | * | |
41 | * PRODUCT=${PRODUCT%/?*} # delete version | |
42 | * VENDOR_ID=`printf "%d" 0x${PRODUCT%/?*}` | |
43 | * PRODUCT_ID=`printf "%d" 0x${PRODUCT#*?/}` | |
44 | * | |
45 | * PARAM_PATH=/sys/module/ti_usb_3410_5052/parameters | |
46 | * | |
47 | * function scan() { | |
48 | * s=$1 | |
49 | * shift | |
50 | * for i | |
51 | * do | |
52 | * if [[ $s -eq $i ]] | |
53 | * then | |
54 | * return 0 | |
55 | * fi | |
56 | * done | |
57 | * return 1 | |
58 | * } | |
59 | * | |
60 | * IFS=$IFS, | |
61 | * | |
62 | * if (scan $VENDOR_ID 1105 `cat $PARAM_PATH/vendor_3410` && | |
63 | * scan $PRODUCT_ID 13328 `cat $PARAM_PATH/product_3410`) || | |
64 | * (scan $VENDOR_ID 1105 `cat $PARAM_PATH/vendor_5052` && | |
65 | * scan $PRODUCT_ID 20562 20818 20570 20575 `cat $PARAM_PATH/product_5052`) | |
66 | * then | |
67 | * echo $ACTIVE_CONFIG > $CONFIG_PATH | |
68 | * fi | |
69 | */ | |
70 | ||
71 | #include <linux/config.h> | |
72 | #include <linux/kernel.h> | |
73 | #include <linux/errno.h> | |
74 | #include <linux/init.h> | |
75 | #include <linux/slab.h> | |
76 | #include <linux/tty.h> | |
77 | #include <linux/tty_driver.h> | |
78 | #include <linux/tty_flip.h> | |
79 | #include <linux/module.h> | |
80 | #include <linux/spinlock.h> | |
81 | #include <linux/ioctl.h> | |
82 | #include <linux/serial.h> | |
83 | #include <linux/circ_buf.h> | |
84 | #include <asm/uaccess.h> | |
85 | #include <asm/semaphore.h> | |
86 | #include <linux/usb.h> | |
87 | ||
88 | #include "usb-serial.h" | |
89 | #include "ti_usb_3410_5052.h" | |
90 | #include "ti_fw_3410.h" /* firmware image for 3410 */ | |
91 | #include "ti_fw_5052.h" /* firmware image for 5052 */ | |
92 | ||
93 | ||
94 | /* Defines */ | |
95 | ||
96 | #define TI_DRIVER_VERSION "v0.9" | |
97 | #define TI_DRIVER_AUTHOR "Al Borchers <alborchers@steinerpoint.com>" | |
98 | #define TI_DRIVER_DESC "TI USB 3410/5052 Serial Driver" | |
99 | ||
100 | #define TI_FIRMWARE_BUF_SIZE 16284 | |
101 | ||
102 | #define TI_WRITE_BUF_SIZE 1024 | |
103 | ||
104 | #define TI_TRANSFER_TIMEOUT 2 | |
105 | ||
106 | #define TI_DEFAULT_LOW_LATENCY 0 | |
107 | #define TI_DEFAULT_CLOSING_WAIT 4000 /* in .01 secs */ | |
108 | ||
109 | /* supported setserial flags */ | |
110 | #define TI_SET_SERIAL_FLAGS (ASYNC_LOW_LATENCY) | |
111 | ||
112 | /* read urb states */ | |
113 | #define TI_READ_URB_RUNNING 0 | |
114 | #define TI_READ_URB_STOPPING 1 | |
115 | #define TI_READ_URB_STOPPED 2 | |
116 | ||
117 | #define TI_EXTRA_VID_PID_COUNT 5 | |
118 | ||
119 | ||
120 | /* Structures */ | |
121 | ||
122 | struct ti_port { | |
123 | int tp_is_open; | |
124 | __u8 tp_msr; | |
125 | __u8 tp_lsr; | |
126 | __u8 tp_shadow_mcr; | |
127 | __u8 tp_uart_mode; /* 232 or 485 modes */ | |
128 | unsigned int tp_uart_base_addr; | |
129 | int tp_flags; | |
130 | int tp_closing_wait;/* in .01 secs */ | |
131 | struct async_icount tp_icount; | |
132 | wait_queue_head_t tp_msr_wait; /* wait for msr change */ | |
133 | wait_queue_head_t tp_write_wait; | |
134 | struct ti_device *tp_tdev; | |
135 | struct usb_serial_port *tp_port; | |
136 | spinlock_t tp_lock; | |
137 | int tp_read_urb_state; | |
138 | int tp_write_urb_in_use; | |
139 | struct circ_buf *tp_write_buf; | |
140 | }; | |
141 | ||
142 | struct ti_device { | |
143 | struct semaphore td_open_close_sem; | |
144 | int td_open_port_count; | |
145 | struct usb_serial *td_serial; | |
146 | int td_is_3410; | |
147 | int td_urb_error; | |
148 | }; | |
149 | ||
150 | ||
151 | /* Function Declarations */ | |
152 | ||
153 | static int ti_startup(struct usb_serial *serial); | |
154 | static void ti_shutdown(struct usb_serial *serial); | |
155 | static int ti_open(struct usb_serial_port *port, struct file *file); | |
156 | static void ti_close(struct usb_serial_port *port, struct file *file); | |
157 | static int ti_write(struct usb_serial_port *port, const unsigned char *data, | |
158 | int count); | |
159 | static int ti_write_room(struct usb_serial_port *port); | |
160 | static int ti_chars_in_buffer(struct usb_serial_port *port); | |
161 | static void ti_throttle(struct usb_serial_port *port); | |
162 | static void ti_unthrottle(struct usb_serial_port *port); | |
163 | static int ti_ioctl(struct usb_serial_port *port, struct file *file, unsigned int cmd, unsigned long arg); | |
164 | static void ti_set_termios(struct usb_serial_port *port, | |
165 | struct termios *old_termios); | |
166 | static int ti_tiocmget(struct usb_serial_port *port, struct file *file); | |
167 | static int ti_tiocmset(struct usb_serial_port *port, struct file *file, | |
168 | unsigned int set, unsigned int clear); | |
169 | static void ti_break(struct usb_serial_port *port, int break_state); | |
170 | static void ti_interrupt_callback(struct urb *urb, struct pt_regs *regs); | |
171 | static void ti_bulk_in_callback(struct urb *urb, struct pt_regs *regs); | |
172 | static void ti_bulk_out_callback(struct urb *urb, struct pt_regs *regs); | |
173 | ||
174 | static void ti_recv(struct device *dev, struct tty_struct *tty, | |
175 | unsigned char *data, int length); | |
176 | static void ti_send(struct ti_port *tport); | |
177 | static int ti_set_mcr(struct ti_port *tport, unsigned int mcr); | |
178 | static int ti_get_lsr(struct ti_port *tport); | |
179 | static int ti_get_serial_info(struct ti_port *tport, | |
180 | struct serial_struct __user *ret_arg); | |
181 | static int ti_set_serial_info(struct ti_port *tport, | |
182 | struct serial_struct __user *new_arg); | |
183 | static void ti_handle_new_msr(struct ti_port *tport, __u8 msr); | |
184 | ||
185 | static void ti_drain(struct ti_port *tport, unsigned long timeout, int flush); | |
186 | ||
187 | static void ti_stop_read(struct ti_port *tport, struct tty_struct *tty); | |
188 | static int ti_restart_read(struct ti_port *tport, struct tty_struct *tty); | |
189 | ||
190 | static int ti_command_out_sync(struct ti_device *tdev, __u8 command, | |
191 | __u16 moduleid, __u16 value, __u8 *data, int size); | |
192 | static int ti_command_in_sync(struct ti_device *tdev, __u8 command, | |
193 | __u16 moduleid, __u16 value, __u8 *data, int size); | |
194 | ||
195 | static int ti_write_byte(struct ti_device *tdev, unsigned long addr, | |
196 | __u8 mask, __u8 byte); | |
197 | ||
198 | static int ti_download_firmware(struct ti_device *tdev, | |
199 | unsigned char *firmware, unsigned int firmware_size); | |
200 | ||
201 | /* circular buffer */ | |
202 | static struct circ_buf *ti_buf_alloc(void); | |
203 | static void ti_buf_free(struct circ_buf *cb); | |
204 | static void ti_buf_clear(struct circ_buf *cb); | |
205 | static int ti_buf_data_avail(struct circ_buf *cb); | |
206 | static int ti_buf_space_avail(struct circ_buf *cb); | |
207 | static int ti_buf_put(struct circ_buf *cb, const char *buf, int count); | |
208 | static int ti_buf_get(struct circ_buf *cb, char *buf, int count); | |
209 | ||
210 | ||
211 | /* Data */ | |
212 | ||
213 | /* module parameters */ | |
214 | static int debug; | |
215 | static int low_latency = TI_DEFAULT_LOW_LATENCY; | |
216 | static int closing_wait = TI_DEFAULT_CLOSING_WAIT; | |
217 | static ushort vendor_3410[TI_EXTRA_VID_PID_COUNT]; | |
218 | static int vendor_3410_count; | |
219 | static ushort product_3410[TI_EXTRA_VID_PID_COUNT]; | |
220 | static int product_3410_count; | |
221 | static ushort vendor_5052[TI_EXTRA_VID_PID_COUNT]; | |
222 | static int vendor_5052_count; | |
223 | static ushort product_5052[TI_EXTRA_VID_PID_COUNT]; | |
224 | static int product_5052_count; | |
225 | ||
226 | /* supported devices */ | |
227 | /* the array dimension is the number of default entries plus */ | |
228 | /* TI_EXTRA_VID_PID_COUNT user defined entries plus 1 terminating */ | |
229 | /* null entry */ | |
230 | static struct usb_device_id ti_id_table_3410[1+TI_EXTRA_VID_PID_COUNT+1] = { | |
231 | { USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) }, | |
232 | }; | |
233 | ||
234 | static struct usb_device_id ti_id_table_5052[4+TI_EXTRA_VID_PID_COUNT+1] = { | |
235 | { USB_DEVICE(TI_VENDOR_ID, TI_5052_BOOT_PRODUCT_ID) }, | |
236 | { USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) }, | |
237 | { USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) }, | |
238 | { USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) }, | |
239 | }; | |
240 | ||
241 | static struct usb_device_id ti_id_table_combined[] = { | |
242 | { USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) }, | |
243 | { USB_DEVICE(TI_VENDOR_ID, TI_5052_BOOT_PRODUCT_ID) }, | |
244 | { USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) }, | |
245 | { USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) }, | |
246 | { USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) }, | |
247 | { } | |
248 | }; | |
249 | ||
250 | static struct usb_driver ti_usb_driver = { | |
251 | .owner = THIS_MODULE, | |
252 | .name = "ti_usb_3410_5052", | |
253 | .probe = usb_serial_probe, | |
254 | .disconnect = usb_serial_disconnect, | |
255 | .id_table = ti_id_table_combined, | |
256 | }; | |
257 | ||
ea65370d | 258 | static struct usb_serial_driver ti_1port_device = { |
18fcac35 | 259 | .driver = { |
269bda1c GKH |
260 | .owner = THIS_MODULE, |
261 | .name = "ti_usb_3410_5052_1", | |
18fcac35 | 262 | }, |
269bda1c | 263 | .description = "TI USB 3410 1 port adapter", |
1da177e4 LT |
264 | .id_table = ti_id_table_3410, |
265 | .num_interrupt_in = 1, | |
266 | .num_bulk_in = 1, | |
267 | .num_bulk_out = 1, | |
268 | .num_ports = 1, | |
269 | .attach = ti_startup, | |
270 | .shutdown = ti_shutdown, | |
271 | .open = ti_open, | |
272 | .close = ti_close, | |
273 | .write = ti_write, | |
274 | .write_room = ti_write_room, | |
275 | .chars_in_buffer = ti_chars_in_buffer, | |
276 | .throttle = ti_throttle, | |
277 | .unthrottle = ti_unthrottle, | |
278 | .ioctl = ti_ioctl, | |
279 | .set_termios = ti_set_termios, | |
280 | .tiocmget = ti_tiocmget, | |
281 | .tiocmset = ti_tiocmset, | |
282 | .break_ctl = ti_break, | |
283 | .read_int_callback = ti_interrupt_callback, | |
284 | .read_bulk_callback = ti_bulk_in_callback, | |
285 | .write_bulk_callback = ti_bulk_out_callback, | |
286 | }; | |
287 | ||
ea65370d | 288 | static struct usb_serial_driver ti_2port_device = { |
18fcac35 | 289 | .driver = { |
269bda1c GKH |
290 | .owner = THIS_MODULE, |
291 | .name = "ti_usb_3410_5052_2", | |
18fcac35 | 292 | }, |
269bda1c | 293 | .description = "TI USB 5052 2 port adapter", |
1da177e4 LT |
294 | .id_table = ti_id_table_5052, |
295 | .num_interrupt_in = 1, | |
296 | .num_bulk_in = 2, | |
297 | .num_bulk_out = 2, | |
298 | .num_ports = 2, | |
299 | .attach = ti_startup, | |
300 | .shutdown = ti_shutdown, | |
301 | .open = ti_open, | |
302 | .close = ti_close, | |
303 | .write = ti_write, | |
304 | .write_room = ti_write_room, | |
305 | .chars_in_buffer = ti_chars_in_buffer, | |
306 | .throttle = ti_throttle, | |
307 | .unthrottle = ti_unthrottle, | |
308 | .ioctl = ti_ioctl, | |
309 | .set_termios = ti_set_termios, | |
310 | .tiocmget = ti_tiocmget, | |
311 | .tiocmset = ti_tiocmset, | |
312 | .break_ctl = ti_break, | |
313 | .read_int_callback = ti_interrupt_callback, | |
314 | .read_bulk_callback = ti_bulk_in_callback, | |
315 | .write_bulk_callback = ti_bulk_out_callback, | |
316 | }; | |
317 | ||
318 | ||
319 | /* Module */ | |
320 | ||
321 | MODULE_AUTHOR(TI_DRIVER_AUTHOR); | |
322 | MODULE_DESCRIPTION(TI_DRIVER_DESC); | |
323 | MODULE_VERSION(TI_DRIVER_VERSION); | |
324 | MODULE_LICENSE("GPL"); | |
325 | ||
326 | module_param(debug, bool, S_IRUGO | S_IWUSR); | |
327 | MODULE_PARM_DESC(debug, "Enable debugging, 0=no, 1=yes"); | |
328 | ||
329 | module_param(low_latency, bool, S_IRUGO | S_IWUSR); | |
330 | MODULE_PARM_DESC(low_latency, "TTY low_latency flag, 0=off, 1=on, default is off"); | |
331 | ||
332 | module_param(closing_wait, int, S_IRUGO | S_IWUSR); | |
333 | MODULE_PARM_DESC(closing_wait, "Maximum wait for data to drain in close, in .01 secs, default is 4000"); | |
334 | ||
335 | module_param_array(vendor_3410, ushort, &vendor_3410_count, S_IRUGO); | |
336 | MODULE_PARM_DESC(vendor_3410, "Vendor ids for 3410 based devices, 1-5 short integers"); | |
337 | module_param_array(product_3410, ushort, &product_3410_count, S_IRUGO); | |
338 | MODULE_PARM_DESC(product_3410, "Product ids for 3410 based devices, 1-5 short integers"); | |
339 | module_param_array(vendor_5052, ushort, &vendor_5052_count, S_IRUGO); | |
340 | MODULE_PARM_DESC(vendor_5052, "Vendor ids for 5052 based devices, 1-5 short integers"); | |
341 | module_param_array(product_5052, ushort, &product_5052_count, S_IRUGO); | |
342 | MODULE_PARM_DESC(product_5052, "Product ids for 5052 based devices, 1-5 short integers"); | |
343 | ||
344 | MODULE_DEVICE_TABLE(usb, ti_id_table_combined); | |
345 | ||
346 | ||
347 | /* Functions */ | |
348 | ||
349 | static int __init ti_init(void) | |
350 | { | |
351 | int i,j; | |
352 | int ret; | |
353 | ||
354 | ||
355 | /* insert extra vendor and product ids */ | |
356 | j = sizeof(ti_id_table_3410)/sizeof(struct usb_device_id) | |
357 | - TI_EXTRA_VID_PID_COUNT - 1; | |
358 | for (i=0; i<min(vendor_3410_count,product_3410_count); i++,j++) { | |
359 | ti_id_table_3410[j].idVendor = vendor_3410[i]; | |
360 | ti_id_table_3410[j].idProduct = product_3410[i]; | |
361 | ti_id_table_3410[j].match_flags = USB_DEVICE_ID_MATCH_DEVICE; | |
362 | } | |
363 | j = sizeof(ti_id_table_5052)/sizeof(struct usb_device_id) | |
364 | - TI_EXTRA_VID_PID_COUNT - 1; | |
365 | for (i=0; i<min(vendor_5052_count,product_5052_count); i++,j++) { | |
366 | ti_id_table_5052[j].idVendor = vendor_5052[i]; | |
367 | ti_id_table_5052[j].idProduct = product_5052[i]; | |
368 | ti_id_table_5052[j].match_flags = USB_DEVICE_ID_MATCH_DEVICE; | |
369 | } | |
370 | ||
371 | ret = usb_serial_register(&ti_1port_device); | |
372 | if (ret) | |
373 | goto failed_1port; | |
374 | ret = usb_serial_register(&ti_2port_device); | |
375 | if (ret) | |
376 | goto failed_2port; | |
377 | ||
378 | ret = usb_register(&ti_usb_driver); | |
379 | if (ret) | |
380 | goto failed_usb; | |
381 | ||
382 | info(TI_DRIVER_DESC " " TI_DRIVER_VERSION); | |
383 | ||
384 | return 0; | |
385 | ||
386 | failed_usb: | |
387 | usb_serial_deregister(&ti_2port_device); | |
388 | failed_2port: | |
389 | usb_serial_deregister(&ti_1port_device); | |
390 | failed_1port: | |
391 | return ret; | |
392 | } | |
393 | ||
394 | ||
395 | static void __exit ti_exit(void) | |
396 | { | |
397 | usb_serial_deregister(&ti_1port_device); | |
398 | usb_serial_deregister(&ti_2port_device); | |
399 | usb_deregister(&ti_usb_driver); | |
400 | } | |
401 | ||
402 | ||
403 | module_init(ti_init); | |
404 | module_exit(ti_exit); | |
405 | ||
406 | ||
407 | static int ti_startup(struct usb_serial *serial) | |
408 | { | |
409 | struct ti_device *tdev; | |
410 | struct ti_port *tport; | |
411 | struct usb_device *dev = serial->dev; | |
412 | int status; | |
413 | int i; | |
414 | ||
415 | ||
416 | dbg("%s - product 0x%4X, num configurations %d, configuration value %d", | |
417 | __FUNCTION__, le16_to_cpu(dev->descriptor.idProduct), | |
418 | dev->descriptor.bNumConfigurations, | |
419 | dev->actconfig->desc.bConfigurationValue); | |
420 | ||
421 | /* create device structure */ | |
422 | tdev = kmalloc(sizeof(struct ti_device), GFP_KERNEL); | |
423 | if (tdev == NULL) { | |
424 | dev_err(&dev->dev, "%s - out of memory\n", __FUNCTION__); | |
425 | return -ENOMEM; | |
426 | } | |
427 | memset(tdev, 0, sizeof(struct ti_device)); | |
428 | sema_init(&tdev->td_open_close_sem, 1); | |
429 | tdev->td_serial = serial; | |
430 | usb_set_serial_data(serial, tdev); | |
431 | ||
432 | /* determine device type */ | |
433 | if (usb_match_id(serial->interface, ti_id_table_3410)) | |
434 | tdev->td_is_3410 = 1; | |
435 | dbg("%s - device type is %s", __FUNCTION__, tdev->td_is_3410 ? "3410" : "5052"); | |
436 | ||
437 | /* if we have only 1 configuration, download firmware */ | |
438 | if (dev->descriptor.bNumConfigurations == 1) { | |
439 | ||
440 | if (tdev->td_is_3410) | |
441 | status = ti_download_firmware(tdev, ti_fw_3410, | |
442 | sizeof(ti_fw_3410)); | |
443 | else | |
444 | status = ti_download_firmware(tdev, ti_fw_5052, | |
445 | sizeof(ti_fw_5052)); | |
446 | if (status) | |
447 | goto free_tdev; | |
448 | ||
449 | /* 3410 must be reset, 5052 resets itself */ | |
450 | if (tdev->td_is_3410) { | |
451 | msleep_interruptible(100); | |
452 | usb_reset_device(dev); | |
453 | } | |
454 | ||
455 | status = -ENODEV; | |
456 | goto free_tdev; | |
457 | } | |
458 | ||
459 | /* the second configuration must be set (in sysfs by hotplug script) */ | |
460 | if (dev->actconfig->desc.bConfigurationValue == TI_BOOT_CONFIG) { | |
461 | status = -ENODEV; | |
462 | goto free_tdev; | |
463 | } | |
464 | ||
465 | /* set up port structures */ | |
466 | for (i = 0; i < serial->num_ports; ++i) { | |
467 | tport = kmalloc(sizeof(struct ti_port), GFP_KERNEL); | |
468 | if (tport == NULL) { | |
469 | dev_err(&dev->dev, "%s - out of memory\n", __FUNCTION__); | |
470 | status = -ENOMEM; | |
471 | goto free_tports; | |
472 | } | |
473 | memset(tport, 0, sizeof(struct ti_port)); | |
474 | spin_lock_init(&tport->tp_lock); | |
475 | tport->tp_uart_base_addr = (i == 0 ? TI_UART1_BASE_ADDR : TI_UART2_BASE_ADDR); | |
476 | tport->tp_flags = low_latency ? ASYNC_LOW_LATENCY : 0; | |
477 | tport->tp_closing_wait = closing_wait; | |
478 | init_waitqueue_head(&tport->tp_msr_wait); | |
479 | init_waitqueue_head(&tport->tp_write_wait); | |
480 | tport->tp_write_buf = ti_buf_alloc(); | |
481 | if (tport->tp_write_buf == NULL) { | |
482 | dev_err(&dev->dev, "%s - out of memory\n", __FUNCTION__); | |
483 | kfree(tport); | |
484 | status = -ENOMEM; | |
485 | goto free_tports; | |
486 | } | |
487 | tport->tp_port = serial->port[i]; | |
488 | tport->tp_tdev = tdev; | |
489 | usb_set_serial_port_data(serial->port[i], tport); | |
490 | tport->tp_uart_mode = 0; /* default is RS232 */ | |
491 | } | |
492 | ||
493 | return 0; | |
494 | ||
495 | free_tports: | |
496 | for (--i; i>=0; --i) { | |
497 | tport = usb_get_serial_port_data(serial->port[i]); | |
498 | ti_buf_free(tport->tp_write_buf); | |
499 | kfree(tport); | |
500 | usb_set_serial_port_data(serial->port[i], NULL); | |
501 | } | |
502 | free_tdev: | |
503 | kfree(tdev); | |
504 | usb_set_serial_data(serial, NULL); | |
505 | return status; | |
506 | } | |
507 | ||
508 | ||
509 | static void ti_shutdown(struct usb_serial *serial) | |
510 | { | |
511 | int i; | |
512 | struct ti_device *tdev = usb_get_serial_data(serial); | |
513 | struct ti_port *tport; | |
514 | ||
515 | dbg("%s", __FUNCTION__); | |
516 | ||
517 | for (i=0; i < serial->num_ports; ++i) { | |
518 | tport = usb_get_serial_port_data(serial->port[i]); | |
519 | if (tport) { | |
520 | ti_buf_free(tport->tp_write_buf); | |
521 | kfree(tport); | |
522 | usb_set_serial_port_data(serial->port[i], NULL); | |
523 | } | |
524 | } | |
525 | ||
1bc3c9e1 | 526 | kfree(tdev); |
1da177e4 LT |
527 | usb_set_serial_data(serial, NULL); |
528 | } | |
529 | ||
530 | ||
531 | static int ti_open(struct usb_serial_port *port, struct file *file) | |
532 | { | |
533 | struct ti_port *tport = usb_get_serial_port_data(port); | |
534 | struct ti_device *tdev; | |
535 | struct usb_device *dev; | |
536 | struct urb *urb; | |
537 | int port_number; | |
538 | int status; | |
539 | __u16 open_settings = (__u8)(TI_PIPE_MODE_CONTINOUS | | |
540 | TI_PIPE_TIMEOUT_ENABLE | | |
541 | (TI_TRANSFER_TIMEOUT << 2)); | |
542 | ||
543 | dbg("%s - port %d", __FUNCTION__, port->number); | |
544 | ||
545 | if (tport == NULL) | |
546 | return -ENODEV; | |
547 | ||
548 | dev = port->serial->dev; | |
549 | tdev = tport->tp_tdev; | |
550 | ||
551 | /* only one open on any port on a device at a time */ | |
552 | if (down_interruptible(&tdev->td_open_close_sem)) | |
553 | return -ERESTARTSYS; | |
554 | ||
555 | if (port->tty) | |
556 | port->tty->low_latency = | |
557 | (tport->tp_flags & ASYNC_LOW_LATENCY) ? 1 : 0; | |
558 | ||
559 | port_number = port->number - port->serial->minor; | |
560 | ||
561 | memset(&(tport->tp_icount), 0x00, sizeof(tport->tp_icount)); | |
562 | ||
563 | tport->tp_msr = 0; | |
564 | tport->tp_shadow_mcr |= (TI_MCR_RTS | TI_MCR_DTR); | |
565 | ||
566 | /* start interrupt urb the first time a port is opened on this device */ | |
567 | if (tdev->td_open_port_count == 0) { | |
568 | dbg("%s - start interrupt in urb", __FUNCTION__); | |
569 | urb = tdev->td_serial->port[0]->interrupt_in_urb; | |
570 | if (!urb) { | |
571 | dev_err(&port->dev, "%s - no interrupt urb\n", __FUNCTION__); | |
572 | status = -EINVAL; | |
573 | goto up_sem; | |
574 | } | |
575 | urb->complete = ti_interrupt_callback; | |
576 | urb->context = tdev; | |
577 | urb->dev = dev; | |
578 | status = usb_submit_urb(urb, GFP_KERNEL); | |
579 | if (status) { | |
580 | dev_err(&port->dev, "%s - submit interrupt urb failed, %d\n", __FUNCTION__, status); | |
581 | goto up_sem; | |
582 | } | |
583 | } | |
584 | ||
585 | ti_set_termios(port, NULL); | |
586 | ||
587 | dbg("%s - sending TI_OPEN_PORT", __FUNCTION__); | |
588 | status = ti_command_out_sync(tdev, TI_OPEN_PORT, | |
589 | (__u8)(TI_UART1_PORT + port_number), open_settings, NULL, 0); | |
590 | if (status) { | |
591 | dev_err(&port->dev, "%s - cannot send open command, %d\n", __FUNCTION__, status); | |
592 | goto unlink_int_urb; | |
593 | } | |
594 | ||
595 | dbg("%s - sending TI_START_PORT", __FUNCTION__); | |
596 | status = ti_command_out_sync(tdev, TI_START_PORT, | |
597 | (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0); | |
598 | if (status) { | |
599 | dev_err(&port->dev, "%s - cannot send start command, %d\n", __FUNCTION__, status); | |
600 | goto unlink_int_urb; | |
601 | } | |
602 | ||
603 | dbg("%s - sending TI_PURGE_PORT", __FUNCTION__); | |
604 | status = ti_command_out_sync(tdev, TI_PURGE_PORT, | |
605 | (__u8)(TI_UART1_PORT + port_number), TI_PURGE_INPUT, NULL, 0); | |
606 | if (status) { | |
607 | dev_err(&port->dev, "%s - cannot clear input buffers, %d\n", __FUNCTION__, status); | |
608 | goto unlink_int_urb; | |
609 | } | |
610 | status = ti_command_out_sync(tdev, TI_PURGE_PORT, | |
611 | (__u8)(TI_UART1_PORT + port_number), TI_PURGE_OUTPUT, NULL, 0); | |
612 | if (status) { | |
613 | dev_err(&port->dev, "%s - cannot clear output buffers, %d\n", __FUNCTION__, status); | |
614 | goto unlink_int_urb; | |
615 | } | |
616 | ||
617 | /* reset the data toggle on the bulk endpoints to work around bug in | |
618 | * host controllers where things get out of sync some times */ | |
619 | usb_clear_halt(dev, port->write_urb->pipe); | |
620 | usb_clear_halt(dev, port->read_urb->pipe); | |
621 | ||
622 | ti_set_termios(port, NULL); | |
623 | ||
624 | dbg("%s - sending TI_OPEN_PORT (2)", __FUNCTION__); | |
625 | status = ti_command_out_sync(tdev, TI_OPEN_PORT, | |
626 | (__u8)(TI_UART1_PORT + port_number), open_settings, NULL, 0); | |
627 | if (status) { | |
628 | dev_err(&port->dev, "%s - cannot send open command (2), %d\n", __FUNCTION__, status); | |
629 | goto unlink_int_urb; | |
630 | } | |
631 | ||
632 | dbg("%s - sending TI_START_PORT (2)", __FUNCTION__); | |
633 | status = ti_command_out_sync(tdev, TI_START_PORT, | |
634 | (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0); | |
635 | if (status) { | |
636 | dev_err(&port->dev, "%s - cannot send start command (2), %d\n", __FUNCTION__, status); | |
637 | goto unlink_int_urb; | |
638 | } | |
639 | ||
640 | /* start read urb */ | |
641 | dbg("%s - start read urb", __FUNCTION__); | |
642 | urb = port->read_urb; | |
643 | if (!urb) { | |
644 | dev_err(&port->dev, "%s - no read urb\n", __FUNCTION__); | |
645 | status = -EINVAL; | |
646 | goto unlink_int_urb; | |
647 | } | |
648 | tport->tp_read_urb_state = TI_READ_URB_RUNNING; | |
649 | urb->complete = ti_bulk_in_callback; | |
650 | urb->context = tport; | |
651 | urb->dev = dev; | |
652 | status = usb_submit_urb(urb, GFP_KERNEL); | |
653 | if (status) { | |
654 | dev_err(&port->dev, "%s - submit read urb failed, %d\n", __FUNCTION__, status); | |
655 | goto unlink_int_urb; | |
656 | } | |
657 | ||
658 | tport->tp_is_open = 1; | |
659 | ++tdev->td_open_port_count; | |
660 | ||
661 | goto up_sem; | |
662 | ||
663 | unlink_int_urb: | |
664 | if (tdev->td_open_port_count == 0) | |
665 | usb_kill_urb(port->serial->port[0]->interrupt_in_urb); | |
666 | up_sem: | |
667 | up(&tdev->td_open_close_sem); | |
668 | dbg("%s - exit %d", __FUNCTION__, status); | |
669 | return status; | |
670 | } | |
671 | ||
672 | ||
673 | static void ti_close(struct usb_serial_port *port, struct file *file) | |
674 | { | |
675 | struct ti_device *tdev; | |
676 | struct ti_port *tport; | |
677 | int port_number; | |
678 | int status; | |
679 | int do_up; | |
680 | ||
681 | dbg("%s - port %d", __FUNCTION__, port->number); | |
682 | ||
683 | tdev = usb_get_serial_data(port->serial); | |
684 | tport = usb_get_serial_port_data(port); | |
685 | if (tdev == NULL || tport == NULL) | |
686 | return; | |
687 | ||
688 | tport->tp_is_open = 0; | |
689 | ||
690 | ti_drain(tport, (tport->tp_closing_wait*HZ)/100, 1); | |
691 | ||
692 | usb_kill_urb(port->read_urb); | |
693 | usb_kill_urb(port->write_urb); | |
694 | tport->tp_write_urb_in_use = 0; | |
695 | ||
696 | port_number = port->number - port->serial->minor; | |
697 | ||
698 | dbg("%s - sending TI_CLOSE_PORT", __FUNCTION__); | |
699 | status = ti_command_out_sync(tdev, TI_CLOSE_PORT, | |
700 | (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0); | |
701 | if (status) | |
702 | dev_err(&port->dev, "%s - cannot send close port command, %d\n" , __FUNCTION__, status); | |
703 | ||
704 | /* if down is interrupted, continue anyway */ | |
705 | do_up = !down_interruptible(&tdev->td_open_close_sem); | |
706 | --tport->tp_tdev->td_open_port_count; | |
707 | if (tport->tp_tdev->td_open_port_count <= 0) { | |
708 | /* last port is closed, shut down interrupt urb */ | |
709 | usb_kill_urb(port->serial->port[0]->interrupt_in_urb); | |
710 | tport->tp_tdev->td_open_port_count = 0; | |
711 | } | |
712 | if (do_up) | |
713 | up(&tdev->td_open_close_sem); | |
714 | ||
715 | dbg("%s - exit", __FUNCTION__); | |
716 | } | |
717 | ||
718 | ||
719 | static int ti_write(struct usb_serial_port *port, const unsigned char *data, | |
720 | int count) | |
721 | { | |
722 | struct ti_port *tport = usb_get_serial_port_data(port); | |
723 | unsigned long flags; | |
724 | ||
725 | dbg("%s - port %d", __FUNCTION__, port->number); | |
726 | ||
727 | if (count == 0) { | |
728 | dbg("%s - write request of 0 bytes", __FUNCTION__); | |
729 | return 0; | |
730 | } | |
731 | ||
732 | if (tport == NULL || !tport->tp_is_open) | |
733 | return -ENODEV; | |
734 | ||
735 | spin_lock_irqsave(&tport->tp_lock, flags); | |
736 | count = ti_buf_put(tport->tp_write_buf, data, count); | |
737 | spin_unlock_irqrestore(&tport->tp_lock, flags); | |
738 | ||
739 | ti_send(tport); | |
740 | ||
741 | return count; | |
742 | } | |
743 | ||
744 | ||
745 | static int ti_write_room(struct usb_serial_port *port) | |
746 | { | |
747 | struct ti_port *tport = usb_get_serial_port_data(port); | |
748 | int room = 0; | |
749 | unsigned long flags; | |
750 | ||
751 | dbg("%s - port %d", __FUNCTION__, port->number); | |
752 | ||
753 | if (tport == NULL) | |
754 | return -ENODEV; | |
755 | ||
756 | spin_lock_irqsave(&tport->tp_lock, flags); | |
757 | room = ti_buf_space_avail(tport->tp_write_buf); | |
758 | spin_unlock_irqrestore(&tport->tp_lock, flags); | |
759 | ||
760 | dbg("%s - returns %d", __FUNCTION__, room); | |
761 | return room; | |
762 | } | |
763 | ||
764 | ||
765 | static int ti_chars_in_buffer(struct usb_serial_port *port) | |
766 | { | |
767 | struct ti_port *tport = usb_get_serial_port_data(port); | |
768 | int chars = 0; | |
769 | unsigned long flags; | |
770 | ||
771 | dbg("%s - port %d", __FUNCTION__, port->number); | |
772 | ||
773 | if (tport == NULL) | |
774 | return -ENODEV; | |
775 | ||
776 | spin_lock_irqsave(&tport->tp_lock, flags); | |
777 | chars = ti_buf_data_avail(tport->tp_write_buf); | |
778 | spin_unlock_irqrestore(&tport->tp_lock, flags); | |
779 | ||
780 | dbg("%s - returns %d", __FUNCTION__, chars); | |
781 | return chars; | |
782 | } | |
783 | ||
784 | ||
785 | static void ti_throttle(struct usb_serial_port *port) | |
786 | { | |
787 | struct ti_port *tport = usb_get_serial_port_data(port); | |
788 | struct tty_struct *tty; | |
789 | ||
790 | dbg("%s - port %d", __FUNCTION__, port->number); | |
791 | ||
792 | if (tport == NULL) | |
793 | return; | |
794 | ||
795 | tty = port->tty; | |
796 | if (!tty) { | |
797 | dbg("%s - no tty", __FUNCTION__); | |
798 | return; | |
799 | } | |
800 | ||
801 | if (I_IXOFF(tty) || C_CRTSCTS(tty)) | |
802 | ti_stop_read(tport, tty); | |
803 | ||
804 | } | |
805 | ||
806 | ||
807 | static void ti_unthrottle(struct usb_serial_port *port) | |
808 | { | |
809 | struct ti_port *tport = usb_get_serial_port_data(port); | |
810 | struct tty_struct *tty; | |
811 | int status; | |
812 | ||
813 | dbg("%s - port %d", __FUNCTION__, port->number); | |
814 | ||
815 | if (tport == NULL) | |
816 | return; | |
817 | ||
818 | tty = port->tty; | |
819 | if (!tty) { | |
820 | dbg("%s - no tty", __FUNCTION__); | |
821 | return; | |
822 | } | |
823 | ||
824 | if (I_IXOFF(tty) || C_CRTSCTS(tty)) { | |
825 | status = ti_restart_read(tport, tty); | |
826 | if (status) | |
827 | dev_err(&port->dev, "%s - cannot restart read, %d\n", __FUNCTION__, status); | |
828 | } | |
829 | } | |
830 | ||
831 | ||
832 | static int ti_ioctl(struct usb_serial_port *port, struct file *file, | |
833 | unsigned int cmd, unsigned long arg) | |
834 | { | |
835 | struct ti_port *tport = usb_get_serial_port_data(port); | |
836 | struct async_icount cnow; | |
837 | struct async_icount cprev; | |
838 | ||
839 | dbg("%s - port %d, cmd = 0x%04X", __FUNCTION__, port->number, cmd); | |
840 | ||
841 | if (tport == NULL) | |
842 | return -ENODEV; | |
843 | ||
844 | switch (cmd) { | |
845 | case TIOCGSERIAL: | |
846 | dbg("%s - (%d) TIOCGSERIAL", __FUNCTION__, port->number); | |
847 | return ti_get_serial_info(tport, (struct serial_struct __user *)arg); | |
848 | break; | |
849 | ||
850 | case TIOCSSERIAL: | |
851 | dbg("%s - (%d) TIOCSSERIAL", __FUNCTION__, port->number); | |
852 | return ti_set_serial_info(tport, (struct serial_struct __user *)arg); | |
853 | break; | |
854 | ||
855 | case TIOCMIWAIT: | |
856 | dbg("%s - (%d) TIOCMIWAIT", __FUNCTION__, port->number); | |
857 | cprev = tport->tp_icount; | |
858 | while (1) { | |
859 | interruptible_sleep_on(&tport->tp_msr_wait); | |
860 | if (signal_pending(current)) | |
861 | return -ERESTARTSYS; | |
862 | cnow = tport->tp_icount; | |
863 | if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && | |
864 | cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) | |
865 | return -EIO; /* no change => error */ | |
866 | if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || | |
867 | ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || | |
868 | ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || | |
869 | ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) { | |
870 | return 0; | |
871 | } | |
872 | cprev = cnow; | |
873 | } | |
874 | break; | |
875 | ||
876 | case TIOCGICOUNT: | |
877 | dbg("%s - (%d) TIOCGICOUNT RX=%d, TX=%d", __FUNCTION__, port->number, tport->tp_icount.rx, tport->tp_icount.tx); | |
878 | if (copy_to_user((void __user *)arg, &tport->tp_icount, sizeof(tport->tp_icount))) | |
879 | return -EFAULT; | |
880 | return 0; | |
881 | } | |
882 | ||
883 | return -ENOIOCTLCMD; | |
884 | } | |
885 | ||
886 | ||
887 | static void ti_set_termios(struct usb_serial_port *port, | |
888 | struct termios *old_termios) | |
889 | { | |
890 | struct ti_port *tport = usb_get_serial_port_data(port); | |
891 | struct tty_struct *tty = port->tty; | |
892 | struct ti_uart_config *config; | |
893 | tcflag_t cflag,iflag; | |
894 | int baud; | |
895 | int status; | |
896 | int port_number = port->number - port->serial->minor; | |
897 | unsigned int mcr; | |
898 | ||
899 | dbg("%s - port %d", __FUNCTION__, port->number); | |
900 | ||
901 | if (!tty || !tty->termios) { | |
902 | dbg("%s - no tty or termios", __FUNCTION__); | |
903 | return; | |
904 | } | |
905 | ||
906 | cflag = tty->termios->c_cflag; | |
907 | iflag = tty->termios->c_iflag; | |
908 | ||
909 | if (old_termios && cflag == old_termios->c_cflag | |
910 | && iflag == old_termios->c_iflag) { | |
911 | dbg("%s - nothing to change", __FUNCTION__); | |
912 | return; | |
913 | } | |
914 | ||
915 | dbg("%s - clfag %08x, iflag %08x", __FUNCTION__, cflag, iflag); | |
916 | ||
917 | if (old_termios) | |
918 | dbg("%s - old clfag %08x, old iflag %08x", __FUNCTION__, old_termios->c_cflag, old_termios->c_iflag); | |
919 | ||
920 | if (tport == NULL) | |
921 | return; | |
922 | ||
923 | config = kmalloc(sizeof(*config), GFP_KERNEL); | |
924 | if (!config) { | |
925 | dev_err(&port->dev, "%s - out of memory\n", __FUNCTION__); | |
926 | return; | |
927 | } | |
928 | ||
929 | config->wFlags = 0; | |
930 | ||
931 | /* these flags must be set */ | |
932 | config->wFlags |= TI_UART_ENABLE_MS_INTS; | |
933 | config->wFlags |= TI_UART_ENABLE_AUTO_START_DMA; | |
934 | config->bUartMode = (__u8)(tport->tp_uart_mode); | |
935 | ||
936 | switch (cflag & CSIZE) { | |
937 | case CS5: | |
938 | config->bDataBits = TI_UART_5_DATA_BITS; | |
939 | break; | |
940 | case CS6: | |
941 | config->bDataBits = TI_UART_6_DATA_BITS; | |
942 | break; | |
943 | case CS7: | |
944 | config->bDataBits = TI_UART_7_DATA_BITS; | |
945 | break; | |
946 | default: | |
947 | case CS8: | |
948 | config->bDataBits = TI_UART_8_DATA_BITS; | |
949 | break; | |
950 | } | |
951 | ||
952 | if (cflag & PARENB) { | |
953 | if (cflag & PARODD) { | |
954 | config->wFlags |= TI_UART_ENABLE_PARITY_CHECKING; | |
955 | config->bParity = TI_UART_ODD_PARITY; | |
956 | } else { | |
957 | config->wFlags |= TI_UART_ENABLE_PARITY_CHECKING; | |
958 | config->bParity = TI_UART_EVEN_PARITY; | |
959 | } | |
960 | } else { | |
961 | config->wFlags &= ~TI_UART_ENABLE_PARITY_CHECKING; | |
962 | config->bParity = TI_UART_NO_PARITY; | |
963 | } | |
964 | ||
965 | if (cflag & CSTOPB) | |
966 | config->bStopBits = TI_UART_2_STOP_BITS; | |
967 | else | |
968 | config->bStopBits = TI_UART_1_STOP_BITS; | |
969 | ||
970 | if (cflag & CRTSCTS) { | |
971 | /* RTS flow control must be off to drop RTS for baud rate B0 */ | |
972 | if ((cflag & CBAUD) != B0) | |
973 | config->wFlags |= TI_UART_ENABLE_RTS_IN; | |
974 | config->wFlags |= TI_UART_ENABLE_CTS_OUT; | |
975 | } else { | |
976 | tty->hw_stopped = 0; | |
977 | ti_restart_read(tport, tty); | |
978 | } | |
979 | ||
980 | if (I_IXOFF(tty) || I_IXON(tty)) { | |
981 | config->cXon = START_CHAR(tty); | |
982 | config->cXoff = STOP_CHAR(tty); | |
983 | ||
984 | if (I_IXOFF(tty)) | |
985 | config->wFlags |= TI_UART_ENABLE_X_IN; | |
986 | else | |
987 | ti_restart_read(tport, tty); | |
988 | ||
989 | if (I_IXON(tty)) | |
990 | config->wFlags |= TI_UART_ENABLE_X_OUT; | |
991 | } | |
992 | ||
993 | baud = tty_get_baud_rate(tty); | |
994 | if (!baud) baud = 9600; | |
995 | if (tport->tp_tdev->td_is_3410) | |
996 | config->wBaudRate = (__u16)((923077 + baud/2) / baud); | |
997 | else | |
998 | config->wBaudRate = (__u16)((461538 + baud/2) / baud); | |
999 | ||
1000 | dbg("%s - BaudRate=%d, wBaudRate=%d, wFlags=0x%04X, bDataBits=%d, bParity=%d, bStopBits=%d, cXon=%d, cXoff=%d, bUartMode=%d", | |
1001 | __FUNCTION__, baud, config->wBaudRate, config->wFlags, config->bDataBits, config->bParity, config->bStopBits, config->cXon, config->cXoff, config->bUartMode); | |
1002 | ||
1003 | cpu_to_be16s(&config->wBaudRate); | |
1004 | cpu_to_be16s(&config->wFlags); | |
1005 | ||
1006 | status = ti_command_out_sync(tport->tp_tdev, TI_SET_CONFIG, | |
1007 | (__u8)(TI_UART1_PORT + port_number), 0, (__u8 *)config, | |
1008 | sizeof(*config)); | |
1009 | if (status) | |
1010 | dev_err(&port->dev, "%s - cannot set config on port %d, %d\n", __FUNCTION__, port_number, status); | |
1011 | ||
1012 | /* SET_CONFIG asserts RTS and DTR, reset them correctly */ | |
1013 | mcr = tport->tp_shadow_mcr; | |
1014 | /* if baud rate is B0, clear RTS and DTR */ | |
1015 | if ((cflag & CBAUD) == B0) | |
1016 | mcr &= ~(TI_MCR_DTR | TI_MCR_RTS); | |
1017 | status = ti_set_mcr(tport, mcr); | |
1018 | if (status) | |
1019 | dev_err(&port->dev, "%s - cannot set modem control on port %d, %d\n", __FUNCTION__, port_number, status); | |
1020 | ||
1021 | kfree(config); | |
1022 | } | |
1023 | ||
1024 | ||
1025 | static int ti_tiocmget(struct usb_serial_port *port, struct file *file) | |
1026 | { | |
1027 | struct ti_port *tport = usb_get_serial_port_data(port); | |
1028 | unsigned int result; | |
1029 | unsigned int msr; | |
1030 | unsigned int mcr; | |
1031 | ||
1032 | dbg("%s - port %d", __FUNCTION__, port->number); | |
1033 | ||
1034 | if (tport == NULL) | |
1035 | return -ENODEV; | |
1036 | ||
1037 | msr = tport->tp_msr; | |
1038 | mcr = tport->tp_shadow_mcr; | |
1039 | ||
1040 | result = ((mcr & TI_MCR_DTR) ? TIOCM_DTR : 0) | |
1041 | | ((mcr & TI_MCR_RTS) ? TIOCM_RTS : 0) | |
1042 | | ((mcr & TI_MCR_LOOP) ? TIOCM_LOOP : 0) | |
1043 | | ((msr & TI_MSR_CTS) ? TIOCM_CTS : 0) | |
1044 | | ((msr & TI_MSR_CD) ? TIOCM_CAR : 0) | |
1045 | | ((msr & TI_MSR_RI) ? TIOCM_RI : 0) | |
1046 | | ((msr & TI_MSR_DSR) ? TIOCM_DSR : 0); | |
1047 | ||
1048 | dbg("%s - 0x%04X", __FUNCTION__, result); | |
1049 | ||
1050 | return result; | |
1051 | } | |
1052 | ||
1053 | ||
1054 | static int ti_tiocmset(struct usb_serial_port *port, struct file *file, | |
1055 | unsigned int set, unsigned int clear) | |
1056 | { | |
1057 | struct ti_port *tport = usb_get_serial_port_data(port); | |
1058 | unsigned int mcr; | |
1059 | ||
1060 | dbg("%s - port %d", __FUNCTION__, port->number); | |
1061 | ||
1062 | if (tport == NULL) | |
1063 | return -ENODEV; | |
1064 | ||
1065 | mcr = tport->tp_shadow_mcr; | |
1066 | ||
1067 | if (set & TIOCM_RTS) | |
1068 | mcr |= TI_MCR_RTS; | |
1069 | if (set & TIOCM_DTR) | |
1070 | mcr |= TI_MCR_DTR; | |
1071 | if (set & TIOCM_LOOP) | |
1072 | mcr |= TI_MCR_LOOP; | |
1073 | ||
1074 | if (clear & TIOCM_RTS) | |
1075 | mcr &= ~TI_MCR_RTS; | |
1076 | if (clear & TIOCM_DTR) | |
1077 | mcr &= ~TI_MCR_DTR; | |
1078 | if (clear & TIOCM_LOOP) | |
1079 | mcr &= ~TI_MCR_LOOP; | |
1080 | ||
1081 | return ti_set_mcr(tport, mcr); | |
1082 | } | |
1083 | ||
1084 | ||
1085 | static void ti_break(struct usb_serial_port *port, int break_state) | |
1086 | { | |
1087 | struct ti_port *tport = usb_get_serial_port_data(port); | |
1088 | int status; | |
1089 | ||
1090 | dbg("%s - state = %d", __FUNCTION__, break_state); | |
1091 | ||
1092 | if (tport == NULL) | |
1093 | return; | |
1094 | ||
1095 | ti_drain(tport, (tport->tp_closing_wait*HZ)/100, 0); | |
1096 | ||
1097 | status = ti_write_byte(tport->tp_tdev, | |
1098 | tport->tp_uart_base_addr + TI_UART_OFFSET_LCR, | |
1099 | TI_LCR_BREAK, break_state == -1 ? TI_LCR_BREAK : 0); | |
1100 | ||
1101 | if (status) | |
1102 | dbg("%s - error setting break, %d", __FUNCTION__, status); | |
1103 | } | |
1104 | ||
1105 | ||
1106 | static void ti_interrupt_callback(struct urb *urb, struct pt_regs *regs) | |
1107 | { | |
1108 | struct ti_device *tdev = (struct ti_device *)urb->context; | |
1109 | struct usb_serial_port *port; | |
1110 | struct usb_serial *serial = tdev->td_serial; | |
1111 | struct ti_port *tport; | |
1112 | struct device *dev = &urb->dev->dev; | |
1113 | unsigned char *data = urb->transfer_buffer; | |
1114 | int length = urb->actual_length; | |
1115 | int port_number; | |
1116 | int function; | |
1117 | int status; | |
1118 | __u8 msr; | |
1119 | ||
1120 | dbg("%s", __FUNCTION__); | |
1121 | ||
1122 | switch (urb->status) { | |
1123 | case 0: | |
1124 | break; | |
1125 | case -ECONNRESET: | |
1126 | case -ENOENT: | |
1127 | case -ESHUTDOWN: | |
1128 | dbg("%s - urb shutting down, %d", __FUNCTION__, urb->status); | |
1129 | tdev->td_urb_error = 1; | |
1130 | return; | |
1131 | default: | |
1132 | dev_err(dev, "%s - nonzero urb status, %d\n", __FUNCTION__, urb->status); | |
1133 | tdev->td_urb_error = 1; | |
1134 | goto exit; | |
1135 | } | |
1136 | ||
1137 | if (length != 2) { | |
1138 | dbg("%s - bad packet size, %d", __FUNCTION__, length); | |
1139 | goto exit; | |
1140 | } | |
1141 | ||
1142 | if (data[0] == TI_CODE_HARDWARE_ERROR) { | |
1143 | dev_err(dev, "%s - hardware error, %d\n", __FUNCTION__, data[1]); | |
1144 | goto exit; | |
1145 | } | |
1146 | ||
1147 | port_number = TI_GET_PORT_FROM_CODE(data[0]); | |
1148 | function = TI_GET_FUNC_FROM_CODE(data[0]); | |
1149 | ||
1150 | dbg("%s - port_number %d, function %d, data 0x%02X", __FUNCTION__, port_number, function, data[1]); | |
1151 | ||
1152 | if (port_number >= serial->num_ports) { | |
1153 | dev_err(dev, "%s - bad port number, %d\n", __FUNCTION__, port_number); | |
1154 | goto exit; | |
1155 | } | |
1156 | ||
1157 | port = serial->port[port_number]; | |
1158 | ||
1159 | tport = usb_get_serial_port_data(port); | |
1160 | if (!tport) | |
1161 | goto exit; | |
1162 | ||
1163 | switch (function) { | |
1164 | case TI_CODE_DATA_ERROR: | |
1165 | dev_err(dev, "%s - DATA ERROR, port %d, data 0x%02X\n", __FUNCTION__, port_number, data[1]); | |
1166 | break; | |
1167 | ||
1168 | case TI_CODE_MODEM_STATUS: | |
1169 | msr = data[1]; | |
1170 | dbg("%s - port %d, msr 0x%02X", __FUNCTION__, port_number, msr); | |
1171 | ti_handle_new_msr(tport, msr); | |
1172 | break; | |
1173 | ||
1174 | default: | |
1175 | dev_err(dev, "%s - unknown interrupt code, 0x%02X\n", __FUNCTION__, data[1]); | |
1176 | break; | |
1177 | } | |
1178 | ||
1179 | exit: | |
1180 | status = usb_submit_urb(urb, GFP_ATOMIC); | |
1181 | if (status) | |
1182 | dev_err(dev, "%s - resubmit interrupt urb failed, %d\n", __FUNCTION__, status); | |
1183 | } | |
1184 | ||
1185 | ||
1186 | static void ti_bulk_in_callback(struct urb *urb, struct pt_regs *regs) | |
1187 | { | |
1188 | struct ti_port *tport = (struct ti_port *)urb->context; | |
1189 | struct usb_serial_port *port = tport->tp_port; | |
1190 | struct device *dev = &urb->dev->dev; | |
1191 | int status = 0; | |
1192 | ||
1193 | dbg("%s", __FUNCTION__); | |
1194 | ||
1195 | switch (urb->status) { | |
1196 | case 0: | |
1197 | break; | |
1198 | case -ECONNRESET: | |
1199 | case -ENOENT: | |
1200 | case -ESHUTDOWN: | |
1201 | dbg("%s - urb shutting down, %d", __FUNCTION__, urb->status); | |
1202 | tport->tp_tdev->td_urb_error = 1; | |
1203 | wake_up_interruptible(&tport->tp_write_wait); | |
1204 | return; | |
1205 | default: | |
1206 | dev_err(dev, "%s - nonzero urb status, %d\n", __FUNCTION__, urb->status ); | |
1207 | tport->tp_tdev->td_urb_error = 1; | |
1208 | wake_up_interruptible(&tport->tp_write_wait); | |
1209 | } | |
1210 | ||
1211 | if (urb->status == -EPIPE) | |
1212 | goto exit; | |
1213 | ||
1214 | if (urb->status) { | |
1215 | dev_err(dev, "%s - stopping read!\n", __FUNCTION__); | |
1216 | return; | |
1217 | } | |
1218 | ||
1219 | if (port->tty && urb->actual_length) { | |
1220 | usb_serial_debug_data(debug, dev, __FUNCTION__, | |
1221 | urb->actual_length, urb->transfer_buffer); | |
1222 | ||
1223 | if (!tport->tp_is_open) | |
1224 | dbg("%s - port closed, dropping data", __FUNCTION__); | |
1225 | else | |
1226 | ti_recv(&urb->dev->dev, port->tty, urb->transfer_buffer, | |
1227 | urb->actual_length); | |
1228 | ||
1229 | spin_lock(&tport->tp_lock); | |
1230 | tport->tp_icount.rx += urb->actual_length; | |
1231 | spin_unlock(&tport->tp_lock); | |
1232 | } | |
1233 | ||
1234 | exit: | |
1235 | /* continue to read unless stopping */ | |
1236 | spin_lock(&tport->tp_lock); | |
1237 | if (tport->tp_read_urb_state == TI_READ_URB_RUNNING) { | |
1238 | urb->dev = port->serial->dev; | |
1239 | status = usb_submit_urb(urb, GFP_ATOMIC); | |
1240 | } else if (tport->tp_read_urb_state == TI_READ_URB_STOPPING) { | |
1241 | tport->tp_read_urb_state = TI_READ_URB_STOPPED; | |
1242 | } | |
1243 | spin_unlock(&tport->tp_lock); | |
1244 | if (status) | |
1245 | dev_err(dev, "%s - resubmit read urb failed, %d\n", __FUNCTION__, status); | |
1246 | } | |
1247 | ||
1248 | ||
1249 | static void ti_bulk_out_callback(struct urb *urb, struct pt_regs *regs) | |
1250 | { | |
1251 | struct ti_port *tport = (struct ti_port *)urb->context; | |
1252 | struct usb_serial_port *port = tport->tp_port; | |
1253 | struct device *dev = &urb->dev->dev; | |
1254 | ||
1255 | dbg("%s - port %d", __FUNCTION__, port->number); | |
1256 | ||
1257 | tport->tp_write_urb_in_use = 0; | |
1258 | ||
1259 | switch (urb->status) { | |
1260 | case 0: | |
1261 | break; | |
1262 | case -ECONNRESET: | |
1263 | case -ENOENT: | |
1264 | case -ESHUTDOWN: | |
1265 | dbg("%s - urb shutting down, %d", __FUNCTION__, urb->status); | |
1266 | tport->tp_tdev->td_urb_error = 1; | |
1267 | wake_up_interruptible(&tport->tp_write_wait); | |
1268 | return; | |
1269 | default: | |
1270 | dev_err(dev, "%s - nonzero urb status, %d\n", __FUNCTION__, urb->status); | |
1271 | tport->tp_tdev->td_urb_error = 1; | |
1272 | wake_up_interruptible(&tport->tp_write_wait); | |
1273 | } | |
1274 | ||
1275 | /* send any buffered data */ | |
1276 | ti_send(tport); | |
1277 | } | |
1278 | ||
1279 | ||
1280 | static void ti_recv(struct device *dev, struct tty_struct *tty, | |
1281 | unsigned char *data, int length) | |
1282 | { | |
1283 | int cnt; | |
1284 | ||
1285 | do { | |
1286 | if (tty->flip.count >= TTY_FLIPBUF_SIZE) { | |
1287 | tty_flip_buffer_push(tty); | |
1288 | if (tty->flip.count >= TTY_FLIPBUF_SIZE) { | |
1289 | dev_err(dev, "%s - dropping data, %d bytes lost\n", __FUNCTION__, length); | |
1290 | return; | |
1291 | } | |
1292 | } | |
1293 | cnt = min(length, TTY_FLIPBUF_SIZE - tty->flip.count); | |
1294 | memcpy(tty->flip.char_buf_ptr, data, cnt); | |
1295 | memset(tty->flip.flag_buf_ptr, 0, cnt); | |
1296 | tty->flip.char_buf_ptr += cnt; | |
1297 | tty->flip.flag_buf_ptr += cnt; | |
1298 | tty->flip.count += cnt; | |
1299 | data += cnt; | |
1300 | length -= cnt; | |
1301 | } while (length > 0); | |
1302 | ||
1303 | tty_flip_buffer_push(tty); | |
1304 | } | |
1305 | ||
1306 | ||
1307 | static void ti_send(struct ti_port *tport) | |
1308 | { | |
1309 | int count, result; | |
1310 | struct usb_serial_port *port = tport->tp_port; | |
1311 | struct tty_struct *tty = port->tty; | |
1312 | unsigned long flags; | |
1313 | ||
1314 | ||
1315 | dbg("%s - port %d", __FUNCTION__, port->number); | |
1316 | ||
1317 | spin_lock_irqsave(&tport->tp_lock, flags); | |
1318 | ||
1319 | if (tport->tp_write_urb_in_use) { | |
1320 | spin_unlock_irqrestore(&tport->tp_lock, flags); | |
1321 | return; | |
1322 | } | |
1323 | ||
1324 | count = ti_buf_get(tport->tp_write_buf, | |
1325 | port->write_urb->transfer_buffer, | |
1326 | port->bulk_out_size); | |
1327 | ||
1328 | if (count == 0) { | |
1329 | spin_unlock_irqrestore(&tport->tp_lock, flags); | |
1330 | return; | |
1331 | } | |
1332 | ||
1333 | tport->tp_write_urb_in_use = 1; | |
1334 | ||
1335 | spin_unlock_irqrestore(&tport->tp_lock, flags); | |
1336 | ||
1337 | usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, port->write_urb->transfer_buffer); | |
1338 | ||
1339 | usb_fill_bulk_urb(port->write_urb, port->serial->dev, | |
1340 | usb_sndbulkpipe(port->serial->dev, | |
1341 | port->bulk_out_endpointAddress), | |
1342 | port->write_urb->transfer_buffer, count, | |
1343 | ti_bulk_out_callback, tport); | |
1344 | ||
1345 | result = usb_submit_urb(port->write_urb, GFP_ATOMIC); | |
1346 | if (result) { | |
1347 | dev_err(&port->dev, "%s - submit write urb failed, %d\n", __FUNCTION__, result); | |
1348 | tport->tp_write_urb_in_use = 0; | |
1349 | /* TODO: reschedule ti_send */ | |
1350 | } else { | |
1351 | spin_lock_irqsave(&tport->tp_lock, flags); | |
1352 | tport->tp_icount.tx += count; | |
1353 | spin_unlock_irqrestore(&tport->tp_lock, flags); | |
1354 | } | |
1355 | ||
1356 | /* more room in the buffer for new writes, wakeup */ | |
1357 | if (tty) | |
1358 | tty_wakeup(tty); | |
1359 | wake_up_interruptible(&tport->tp_write_wait); | |
1360 | } | |
1361 | ||
1362 | ||
1363 | static int ti_set_mcr(struct ti_port *tport, unsigned int mcr) | |
1364 | { | |
1365 | int status; | |
1366 | ||
1367 | status = ti_write_byte(tport->tp_tdev, | |
1368 | tport->tp_uart_base_addr + TI_UART_OFFSET_MCR, | |
1369 | TI_MCR_RTS | TI_MCR_DTR | TI_MCR_LOOP, mcr); | |
1370 | ||
1371 | if (!status) | |
1372 | tport->tp_shadow_mcr = mcr; | |
1373 | ||
1374 | return status; | |
1375 | } | |
1376 | ||
1377 | ||
1378 | static int ti_get_lsr(struct ti_port *tport) | |
1379 | { | |
1380 | int size,status; | |
1381 | struct ti_device *tdev = tport->tp_tdev; | |
1382 | struct usb_serial_port *port = tport->tp_port; | |
1383 | int port_number = port->number - port->serial->minor; | |
1384 | struct ti_port_status *data; | |
1385 | ||
1386 | dbg("%s - port %d", __FUNCTION__, port->number); | |
1387 | ||
1388 | size = sizeof(struct ti_port_status); | |
1389 | data = kmalloc(size, GFP_KERNEL); | |
1390 | if (!data) { | |
1391 | dev_err(&port->dev, "%s - out of memory\n", __FUNCTION__); | |
1392 | return -ENOMEM; | |
1393 | } | |
1394 | ||
1395 | status = ti_command_in_sync(tdev, TI_GET_PORT_STATUS, | |
1396 | (__u8)(TI_UART1_PORT+port_number), 0, (__u8 *)data, size); | |
1397 | if (status) { | |
1398 | dev_err(&port->dev, "%s - get port status command failed, %d\n", __FUNCTION__, status); | |
1399 | goto free_data; | |
1400 | } | |
1401 | ||
1402 | dbg("%s - lsr 0x%02X", __FUNCTION__, data->bLSR); | |
1403 | ||
1404 | tport->tp_lsr = data->bLSR; | |
1405 | ||
1406 | free_data: | |
1407 | kfree(data); | |
1408 | return status; | |
1409 | } | |
1410 | ||
1411 | ||
1412 | static int ti_get_serial_info(struct ti_port *tport, | |
1413 | struct serial_struct __user *ret_arg) | |
1414 | { | |
1415 | struct usb_serial_port *port = tport->tp_port; | |
1416 | struct serial_struct ret_serial; | |
1417 | ||
1418 | if (!ret_arg) | |
1419 | return -EFAULT; | |
1420 | ||
1421 | memset(&ret_serial, 0, sizeof(ret_serial)); | |
1422 | ||
1423 | ret_serial.type = PORT_16550A; | |
1424 | ret_serial.line = port->serial->minor; | |
1425 | ret_serial.port = port->number - port->serial->minor; | |
1426 | ret_serial.flags = tport->tp_flags; | |
1427 | ret_serial.xmit_fifo_size = TI_WRITE_BUF_SIZE; | |
1428 | ret_serial.baud_base = tport->tp_tdev->td_is_3410 ? 921600 : 460800; | |
1429 | ret_serial.closing_wait = tport->tp_closing_wait; | |
1430 | ||
1431 | if (copy_to_user(ret_arg, &ret_serial, sizeof(*ret_arg))) | |
1432 | return -EFAULT; | |
1433 | ||
1434 | return 0; | |
1435 | } | |
1436 | ||
1437 | ||
1438 | static int ti_set_serial_info(struct ti_port *tport, | |
1439 | struct serial_struct __user *new_arg) | |
1440 | { | |
1441 | struct usb_serial_port *port = tport->tp_port; | |
1442 | struct serial_struct new_serial; | |
1443 | ||
1444 | if (copy_from_user(&new_serial, new_arg, sizeof(new_serial))) | |
1445 | return -EFAULT; | |
1446 | ||
1447 | tport->tp_flags = new_serial.flags & TI_SET_SERIAL_FLAGS; | |
1448 | if (port->tty) | |
1449 | port->tty->low_latency = | |
1450 | (tport->tp_flags & ASYNC_LOW_LATENCY) ? 1 : 0; | |
1451 | tport->tp_closing_wait = new_serial.closing_wait; | |
1452 | ||
1453 | return 0; | |
1454 | } | |
1455 | ||
1456 | ||
1457 | static void ti_handle_new_msr(struct ti_port *tport, __u8 msr) | |
1458 | { | |
1459 | struct async_icount *icount; | |
1460 | struct tty_struct *tty; | |
1461 | unsigned long flags; | |
1462 | ||
1463 | dbg("%s - msr 0x%02X", __FUNCTION__, msr); | |
1464 | ||
1465 | if (msr & TI_MSR_DELTA_MASK) { | |
1466 | spin_lock_irqsave(&tport->tp_lock, flags); | |
1467 | icount = &tport->tp_icount; | |
1468 | if (msr & TI_MSR_DELTA_CTS) | |
1469 | icount->cts++; | |
1470 | if (msr & TI_MSR_DELTA_DSR) | |
1471 | icount->dsr++; | |
1472 | if (msr & TI_MSR_DELTA_CD) | |
1473 | icount->dcd++; | |
1474 | if (msr & TI_MSR_DELTA_RI) | |
1475 | icount->rng++; | |
1476 | wake_up_interruptible(&tport->tp_msr_wait); | |
1477 | spin_unlock_irqrestore(&tport->tp_lock, flags); | |
1478 | } | |
1479 | ||
1480 | tport->tp_msr = msr & TI_MSR_MASK; | |
1481 | ||
1482 | /* handle CTS flow control */ | |
1483 | tty = tport->tp_port->tty; | |
1484 | if (tty && C_CRTSCTS(tty)) { | |
1485 | if (msr & TI_MSR_CTS) { | |
1486 | tty->hw_stopped = 0; | |
1487 | tty_wakeup(tty); | |
1488 | } else { | |
1489 | tty->hw_stopped = 1; | |
1490 | } | |
1491 | } | |
1492 | } | |
1493 | ||
1494 | ||
1495 | static void ti_drain(struct ti_port *tport, unsigned long timeout, int flush) | |
1496 | { | |
1497 | struct ti_device *tdev = tport->tp_tdev; | |
1498 | struct usb_serial_port *port = tport->tp_port; | |
1499 | wait_queue_t wait; | |
1500 | unsigned long flags; | |
1501 | ||
1502 | dbg("%s - port %d", __FUNCTION__, port->number); | |
1503 | ||
1504 | spin_lock_irqsave(&tport->tp_lock, flags); | |
1505 | ||
1506 | /* wait for data to drain from the buffer */ | |
1507 | tdev->td_urb_error = 0; | |
1508 | init_waitqueue_entry(&wait, current); | |
1509 | add_wait_queue(&tport->tp_write_wait, &wait); | |
1510 | for (;;) { | |
1511 | set_current_state(TASK_INTERRUPTIBLE); | |
1512 | if (ti_buf_data_avail(tport->tp_write_buf) == 0 | |
1513 | || timeout == 0 || signal_pending(current) | |
1514 | || tdev->td_urb_error | |
1515 | || !usb_get_intfdata(port->serial->interface)) /* disconnect */ | |
1516 | break; | |
1517 | spin_unlock_irqrestore(&tport->tp_lock, flags); | |
1518 | timeout = schedule_timeout(timeout); | |
1519 | spin_lock_irqsave(&tport->tp_lock, flags); | |
1520 | } | |
1521 | set_current_state(TASK_RUNNING); | |
1522 | remove_wait_queue(&tport->tp_write_wait, &wait); | |
1523 | ||
1524 | /* flush any remaining data in the buffer */ | |
1525 | if (flush) | |
1526 | ti_buf_clear(tport->tp_write_buf); | |
1527 | ||
1528 | spin_unlock_irqrestore(&tport->tp_lock, flags); | |
1529 | ||
1530 | /* wait for data to drain from the device */ | |
1531 | /* wait for empty tx register, plus 20 ms */ | |
1532 | timeout += jiffies; | |
1533 | tport->tp_lsr &= ~TI_LSR_TX_EMPTY; | |
1534 | while ((long)(jiffies - timeout) < 0 && !signal_pending(current) | |
1535 | && !(tport->tp_lsr&TI_LSR_TX_EMPTY) && !tdev->td_urb_error | |
1536 | && usb_get_intfdata(port->serial->interface)) { /* not disconnected */ | |
1537 | if (ti_get_lsr(tport)) | |
1538 | break; | |
1539 | msleep_interruptible(20); | |
1540 | } | |
1541 | } | |
1542 | ||
1543 | ||
1544 | static void ti_stop_read(struct ti_port *tport, struct tty_struct *tty) | |
1545 | { | |
1546 | unsigned long flags; | |
1547 | ||
1548 | spin_lock_irqsave(&tport->tp_lock, flags); | |
1549 | ||
1550 | if (tport->tp_read_urb_state == TI_READ_URB_RUNNING) | |
1551 | tport->tp_read_urb_state = TI_READ_URB_STOPPING; | |
1552 | ||
1553 | spin_unlock_irqrestore(&tport->tp_lock, flags); | |
1554 | } | |
1555 | ||
1556 | ||
1557 | static int ti_restart_read(struct ti_port *tport, struct tty_struct *tty) | |
1558 | { | |
1559 | struct urb *urb; | |
1560 | int status = 0; | |
1561 | unsigned long flags; | |
1562 | ||
1563 | spin_lock_irqsave(&tport->tp_lock, flags); | |
1564 | ||
1565 | if (tport->tp_read_urb_state == TI_READ_URB_STOPPED) { | |
1566 | urb = tport->tp_port->read_urb; | |
1567 | urb->complete = ti_bulk_in_callback; | |
1568 | urb->context = tport; | |
1569 | urb->dev = tport->tp_port->serial->dev; | |
1570 | status = usb_submit_urb(urb, GFP_KERNEL); | |
1571 | } | |
1572 | tport->tp_read_urb_state = TI_READ_URB_RUNNING; | |
1573 | ||
1574 | spin_unlock_irqrestore(&tport->tp_lock, flags); | |
1575 | ||
1576 | return status; | |
1577 | } | |
1578 | ||
1579 | ||
1580 | static int ti_command_out_sync(struct ti_device *tdev, __u8 command, | |
1581 | __u16 moduleid, __u16 value, __u8 *data, int size) | |
1582 | { | |
1583 | int status; | |
1584 | ||
1585 | status = usb_control_msg(tdev->td_serial->dev, | |
1586 | usb_sndctrlpipe(tdev->td_serial->dev, 0), command, | |
1587 | (USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT), | |
1588 | value, moduleid, data, size, 1000); | |
1589 | ||
1590 | if (status == size) | |
1591 | status = 0; | |
1592 | ||
1593 | if (status > 0) | |
1594 | status = -ECOMM; | |
1595 | ||
1596 | return status; | |
1597 | } | |
1598 | ||
1599 | ||
1600 | static int ti_command_in_sync(struct ti_device *tdev, __u8 command, | |
1601 | __u16 moduleid, __u16 value, __u8 *data, int size) | |
1602 | { | |
1603 | int status; | |
1604 | ||
1605 | status = usb_control_msg(tdev->td_serial->dev, | |
1606 | usb_rcvctrlpipe(tdev->td_serial->dev, 0), command, | |
1607 | (USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN), | |
1608 | value, moduleid, data, size, 1000); | |
1609 | ||
1610 | if (status == size) | |
1611 | status = 0; | |
1612 | ||
1613 | if (status > 0) | |
1614 | status = -ECOMM; | |
1615 | ||
1616 | return status; | |
1617 | } | |
1618 | ||
1619 | ||
1620 | static int ti_write_byte(struct ti_device *tdev, unsigned long addr, | |
1621 | __u8 mask, __u8 byte) | |
1622 | { | |
1623 | int status; | |
1624 | unsigned int size; | |
1625 | struct ti_write_data_bytes *data; | |
1626 | struct device *dev = &tdev->td_serial->dev->dev; | |
1627 | ||
1628 | dbg("%s - addr 0x%08lX, mask 0x%02X, byte 0x%02X", __FUNCTION__, addr, mask, byte); | |
1629 | ||
1630 | size = sizeof(struct ti_write_data_bytes) + 2; | |
1631 | data = kmalloc(size, GFP_KERNEL); | |
1632 | if (!data) { | |
1633 | dev_err(dev, "%s - out of memory\n", __FUNCTION__); | |
1634 | return -ENOMEM; | |
1635 | } | |
1636 | ||
1637 | data->bAddrType = TI_RW_DATA_ADDR_XDATA; | |
1638 | data->bDataType = TI_RW_DATA_BYTE; | |
1639 | data->bDataCounter = 1; | |
1640 | data->wBaseAddrHi = cpu_to_be16(addr>>16); | |
1641 | data->wBaseAddrLo = cpu_to_be16(addr); | |
1642 | data->bData[0] = mask; | |
1643 | data->bData[1] = byte; | |
1644 | ||
1645 | status = ti_command_out_sync(tdev, TI_WRITE_DATA, TI_RAM_PORT, 0, | |
1646 | (__u8 *)data, size); | |
1647 | ||
1648 | if (status < 0) | |
1649 | dev_err(dev, "%s - failed, %d\n", __FUNCTION__, status); | |
1650 | ||
1651 | kfree(data); | |
1652 | ||
1653 | return status; | |
1654 | } | |
1655 | ||
1656 | ||
1657 | static int ti_download_firmware(struct ti_device *tdev, | |
1658 | unsigned char *firmware, unsigned int firmware_size) | |
1659 | { | |
1660 | int status = 0; | |
1661 | int buffer_size; | |
1662 | int pos; | |
1663 | int len; | |
1664 | int done; | |
1665 | __u8 cs = 0; | |
1666 | __u8 *buffer; | |
1667 | struct usb_device *dev = tdev->td_serial->dev; | |
1668 | struct ti_firmware_header *header; | |
1669 | unsigned int pipe = usb_sndbulkpipe(dev, | |
1670 | tdev->td_serial->port[0]->bulk_out_endpointAddress); | |
1671 | ||
1672 | ||
1673 | buffer_size = TI_FIRMWARE_BUF_SIZE + sizeof(struct ti_firmware_header); | |
1674 | buffer = kmalloc(buffer_size, GFP_KERNEL); | |
1675 | if (!buffer) { | |
1676 | dev_err(&dev->dev, "%s - out of memory\n", __FUNCTION__); | |
1677 | return -ENOMEM; | |
1678 | } | |
1679 | ||
1680 | memcpy(buffer, firmware, firmware_size); | |
1681 | memset(buffer+firmware_size, 0xff, buffer_size-firmware_size); | |
1682 | ||
1683 | for(pos = sizeof(struct ti_firmware_header); pos < buffer_size; pos++) | |
1684 | cs = (__u8)(cs + buffer[pos]); | |
1685 | ||
1686 | header = (struct ti_firmware_header *)buffer; | |
1687 | header->wLength = cpu_to_le16((__u16)(buffer_size - sizeof(struct ti_firmware_header))); | |
1688 | header->bCheckSum = cs; | |
1689 | ||
1690 | dbg("%s - downloading firmware", __FUNCTION__); | |
1691 | for (pos = 0; pos < buffer_size; pos += done) { | |
1692 | len = min(buffer_size - pos, TI_DOWNLOAD_MAX_PACKET_SIZE); | |
1693 | status = usb_bulk_msg(dev, pipe, buffer+pos, len, &done, 1000); | |
1694 | if (status) | |
1695 | break; | |
1696 | } | |
1697 | ||
1698 | kfree(buffer); | |
1699 | ||
1700 | if (status) { | |
1701 | dev_err(&dev->dev, "%s - error downloading firmware, %d\n", __FUNCTION__, status); | |
1702 | return status; | |
1703 | } | |
1704 | ||
1705 | dbg("%s - download successful", __FUNCTION__); | |
1706 | ||
1707 | return 0; | |
1708 | } | |
1709 | ||
1710 | ||
1711 | /* Circular Buffer Functions */ | |
1712 | ||
1713 | /* | |
1714 | * ti_buf_alloc | |
1715 | * | |
1716 | * Allocate a circular buffer and all associated memory. | |
1717 | */ | |
1718 | ||
1719 | static struct circ_buf *ti_buf_alloc(void) | |
1720 | { | |
1721 | struct circ_buf *cb; | |
1722 | ||
1723 | cb = (struct circ_buf *)kmalloc(sizeof(struct circ_buf), GFP_KERNEL); | |
1724 | if (cb == NULL) | |
1725 | return NULL; | |
1726 | ||
1727 | cb->buf = kmalloc(TI_WRITE_BUF_SIZE, GFP_KERNEL); | |
1728 | if (cb->buf == NULL) { | |
1729 | kfree(cb); | |
1730 | return NULL; | |
1731 | } | |
1732 | ||
1733 | ti_buf_clear(cb); | |
1734 | ||
1735 | return cb; | |
1736 | } | |
1737 | ||
1738 | ||
1739 | /* | |
1740 | * ti_buf_free | |
1741 | * | |
1742 | * Free the buffer and all associated memory. | |
1743 | */ | |
1744 | ||
1745 | static void ti_buf_free(struct circ_buf *cb) | |
1746 | { | |
1747 | kfree(cb->buf); | |
1748 | kfree(cb); | |
1749 | } | |
1750 | ||
1751 | ||
1752 | /* | |
1753 | * ti_buf_clear | |
1754 | * | |
1755 | * Clear out all data in the circular buffer. | |
1756 | */ | |
1757 | ||
1758 | static void ti_buf_clear(struct circ_buf *cb) | |
1759 | { | |
1760 | cb->head = cb->tail = 0; | |
1761 | } | |
1762 | ||
1763 | ||
1764 | /* | |
1765 | * ti_buf_data_avail | |
1766 | * | |
1767 | * Return the number of bytes of data available in the circular | |
1768 | * buffer. | |
1769 | */ | |
1770 | ||
1771 | static int ti_buf_data_avail(struct circ_buf *cb) | |
1772 | { | |
1773 | return CIRC_CNT(cb->head,cb->tail,TI_WRITE_BUF_SIZE); | |
1774 | } | |
1775 | ||
1776 | ||
1777 | /* | |
1778 | * ti_buf_space_avail | |
1779 | * | |
1780 | * Return the number of bytes of space available in the circular | |
1781 | * buffer. | |
1782 | */ | |
1783 | ||
1784 | static int ti_buf_space_avail(struct circ_buf *cb) | |
1785 | { | |
1786 | return CIRC_SPACE(cb->head,cb->tail,TI_WRITE_BUF_SIZE); | |
1787 | } | |
1788 | ||
1789 | ||
1790 | /* | |
1791 | * ti_buf_put | |
1792 | * | |
1793 | * Copy data data from a user buffer and put it into the circular buffer. | |
1794 | * Restrict to the amount of space available. | |
1795 | * | |
1796 | * Return the number of bytes copied. | |
1797 | */ | |
1798 | ||
1799 | static int ti_buf_put(struct circ_buf *cb, const char *buf, int count) | |
1800 | { | |
1801 | int c, ret = 0; | |
1802 | ||
1803 | while (1) { | |
1804 | c = CIRC_SPACE_TO_END(cb->head, cb->tail, TI_WRITE_BUF_SIZE); | |
1805 | if (count < c) | |
1806 | c = count; | |
1807 | if (c <= 0) | |
1808 | break; | |
1809 | memcpy(cb->buf + cb->head, buf, c); | |
1810 | cb->head = (cb->head + c) & (TI_WRITE_BUF_SIZE-1); | |
1811 | buf += c; | |
1812 | count -= c; | |
1813 | ret += c; | |
1814 | } | |
1815 | ||
1816 | return ret; | |
1817 | } | |
1818 | ||
1819 | ||
1820 | /* | |
1821 | * ti_buf_get | |
1822 | * | |
1823 | * Get data from the circular buffer and copy to the given buffer. | |
1824 | * Restrict to the amount of data available. | |
1825 | * | |
1826 | * Return the number of bytes copied. | |
1827 | */ | |
1828 | ||
1829 | static int ti_buf_get(struct circ_buf *cb, char *buf, int count) | |
1830 | { | |
1831 | int c, ret = 0; | |
1832 | ||
1833 | while (1) { | |
1834 | c = CIRC_CNT_TO_END(cb->head, cb->tail, TI_WRITE_BUF_SIZE); | |
1835 | if (count < c) | |
1836 | c = count; | |
1837 | if (c <= 0) | |
1838 | break; | |
1839 | memcpy(buf, cb->buf + cb->tail, c); | |
1840 | cb->tail = (cb->tail + c) & (TI_WRITE_BUF_SIZE-1); | |
1841 | buf += c; | |
1842 | count -= c; | |
1843 | ret += c; | |
1844 | } | |
1845 | ||
1846 | return ret; | |
1847 | } |