]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * USB ConnectTech WhiteHEAT driver | |
3 | * | |
4 | * Copyright (C) 2002 | |
5 | * Connect Tech Inc. | |
6 | * | |
7 | * Copyright (C) 1999 - 2001 | |
8 | * Greg Kroah-Hartman (greg@kroah.com) | |
9 | * | |
10 | * This program is free software; you can redistribute it and/or modify | |
11 | * it under the terms of the GNU General Public License as published by | |
12 | * the Free Software Foundation; either version 2 of the License, or | |
13 | * (at your option) any later version. | |
14 | * | |
15 | * See Documentation/usb/usb-serial.txt for more information on using this driver | |
16 | * | |
17 | * (10/09/2002) Stuart MacDonald (stuartm@connecttech.com) | |
18 | * Upgrade to full working driver | |
19 | * | |
20 | * (05/30/2001) gkh | |
21 | * switched from using spinlock to a semaphore, which fixes lots of problems. | |
22 | * | |
23 | * (04/08/2001) gb | |
24 | * Identify version on module load. | |
25 | * | |
26 | * 2001_Mar_19 gkh | |
27 | * Fixed MOD_INC and MOD_DEC logic, the ability to open a port more | |
28 | * than once, and the got the proper usb_device_id table entries so | |
29 | * the driver works again. | |
30 | * | |
31 | * (11/01/2000) Adam J. Richter | |
32 | * usb_device_id table support | |
33 | * | |
34 | * (10/05/2000) gkh | |
35 | * Fixed bug with urb->dev not being set properly, now that the usb | |
36 | * core needs it. | |
37 | * | |
38 | * (10/03/2000) smd | |
39 | * firmware is improved to guard against crap sent to device | |
40 | * firmware now replies CMD_FAILURE on bad things | |
41 | * read_callback fix you provided for private info struct | |
42 | * command_finished now indicates success or fail | |
43 | * setup_port struct now packed to avoid gcc padding | |
44 | * firmware uses 1 based port numbering, driver now handles that | |
45 | * | |
46 | * (09/11/2000) gkh | |
47 | * Removed DEBUG #ifdefs with call to usb_serial_debug_data | |
48 | * | |
49 | * (07/19/2000) gkh | |
50 | * Added module_init and module_exit functions to handle the fact that this | |
51 | * driver is a loadable module now. | |
52 | * Fixed bug with port->minor that was found by Al Borchers | |
53 | * | |
54 | * (07/04/2000) gkh | |
55 | * Added support for port settings. Baud rate can now be changed. Line signals | |
56 | * are not transferred to and from the tty layer yet, but things seem to be | |
57 | * working well now. | |
58 | * | |
59 | * (05/04/2000) gkh | |
60 | * First cut at open and close commands. Data can flow through the ports at | |
61 | * default speeds now. | |
62 | * | |
63 | * (03/26/2000) gkh | |
64 | * Split driver up into device specific pieces. | |
65 | * | |
66 | */ | |
67 | ||
1da177e4 LT |
68 | #include <linux/kernel.h> |
69 | #include <linux/errno.h> | |
70 | #include <linux/init.h> | |
71 | #include <linux/slab.h> | |
72 | #include <linux/tty.h> | |
73 | #include <linux/tty_driver.h> | |
74 | #include <linux/tty_flip.h> | |
75 | #include <linux/module.h> | |
76 | #include <linux/spinlock.h> | |
77 | #include <asm/uaccess.h> | |
78 | #include <asm/termbits.h> | |
79 | #include <linux/usb.h> | |
80 | #include <linux/serial_reg.h> | |
81 | #include <linux/serial.h> | |
82 | #include "usb-serial.h" | |
83 | #include "whiteheat_fw.h" /* firmware for the ConnectTech WhiteHEAT device */ | |
84 | #include "whiteheat.h" /* WhiteHEAT specific commands */ | |
85 | ||
86 | static int debug; | |
87 | ||
88 | #ifndef CMSPAR | |
89 | #define CMSPAR 0 | |
90 | #endif | |
91 | ||
92 | /* | |
93 | * Version Information | |
94 | */ | |
95 | #define DRIVER_VERSION "v2.0" | |
96 | #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Stuart MacDonald <stuartm@connecttech.com>" | |
97 | #define DRIVER_DESC "USB ConnectTech WhiteHEAT driver" | |
98 | ||
99 | #define CONNECT_TECH_VENDOR_ID 0x0710 | |
100 | #define CONNECT_TECH_FAKE_WHITE_HEAT_ID 0x0001 | |
101 | #define CONNECT_TECH_WHITE_HEAT_ID 0x8001 | |
102 | ||
103 | /* | |
104 | ID tables for whiteheat are unusual, because we want to different | |
105 | things for different versions of the device. Eventually, this | |
106 | will be doable from a single table. But, for now, we define two | |
107 | separate ID tables, and then a third table that combines them | |
108 | just for the purpose of exporting the autoloading information. | |
109 | */ | |
110 | static struct usb_device_id id_table_std [] = { | |
111 | { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) }, | |
112 | { } /* Terminating entry */ | |
113 | }; | |
114 | ||
115 | static struct usb_device_id id_table_prerenumeration [] = { | |
116 | { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) }, | |
117 | { } /* Terminating entry */ | |
118 | }; | |
119 | ||
120 | static struct usb_device_id id_table_combined [] = { | |
121 | { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) }, | |
122 | { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) }, | |
123 | { } /* Terminating entry */ | |
124 | }; | |
125 | ||
126 | MODULE_DEVICE_TABLE (usb, id_table_combined); | |
127 | ||
128 | static struct usb_driver whiteheat_driver = { | |
1da177e4 LT |
129 | .name = "whiteheat", |
130 | .probe = usb_serial_probe, | |
131 | .disconnect = usb_serial_disconnect, | |
132 | .id_table = id_table_combined, | |
ba9dc657 | 133 | .no_dynamic_id = 1, |
1da177e4 LT |
134 | }; |
135 | ||
136 | /* function prototypes for the Connect Tech WhiteHEAT prerenumeration device */ | |
137 | static int whiteheat_firmware_download (struct usb_serial *serial, const struct usb_device_id *id); | |
138 | static int whiteheat_firmware_attach (struct usb_serial *serial); | |
139 | ||
140 | /* function prototypes for the Connect Tech WhiteHEAT serial converter */ | |
141 | static int whiteheat_attach (struct usb_serial *serial); | |
142 | static void whiteheat_shutdown (struct usb_serial *serial); | |
143 | static int whiteheat_open (struct usb_serial_port *port, struct file *filp); | |
144 | static void whiteheat_close (struct usb_serial_port *port, struct file *filp); | |
145 | static int whiteheat_write (struct usb_serial_port *port, const unsigned char *buf, int count); | |
146 | static int whiteheat_write_room (struct usb_serial_port *port); | |
147 | static int whiteheat_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg); | |
148 | static void whiteheat_set_termios (struct usb_serial_port *port, struct termios * old); | |
149 | static int whiteheat_tiocmget (struct usb_serial_port *port, struct file *file); | |
150 | static int whiteheat_tiocmset (struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear); | |
151 | static void whiteheat_break_ctl (struct usb_serial_port *port, int break_state); | |
152 | static int whiteheat_chars_in_buffer (struct usb_serial_port *port); | |
153 | static void whiteheat_throttle (struct usb_serial_port *port); | |
154 | static void whiteheat_unthrottle (struct usb_serial_port *port); | |
155 | static void whiteheat_read_callback (struct urb *urb, struct pt_regs *regs); | |
156 | static void whiteheat_write_callback (struct urb *urb, struct pt_regs *regs); | |
157 | ||
ea65370d | 158 | static struct usb_serial_driver whiteheat_fake_device = { |
18fcac35 GKH |
159 | .driver = { |
160 | .owner = THIS_MODULE, | |
269bda1c | 161 | .name = "whiteheatnofirm", |
18fcac35 | 162 | }, |
269bda1c | 163 | .description = "Connect Tech - WhiteHEAT - (prerenumeration)", |
1da177e4 LT |
164 | .id_table = id_table_prerenumeration, |
165 | .num_interrupt_in = NUM_DONT_CARE, | |
166 | .num_bulk_in = NUM_DONT_CARE, | |
167 | .num_bulk_out = NUM_DONT_CARE, | |
168 | .num_ports = 1, | |
169 | .probe = whiteheat_firmware_download, | |
170 | .attach = whiteheat_firmware_attach, | |
171 | }; | |
172 | ||
ea65370d | 173 | static struct usb_serial_driver whiteheat_device = { |
18fcac35 GKH |
174 | .driver = { |
175 | .owner = THIS_MODULE, | |
269bda1c | 176 | .name = "whiteheat", |
18fcac35 | 177 | }, |
269bda1c | 178 | .description = "Connect Tech - WhiteHEAT", |
1da177e4 LT |
179 | .id_table = id_table_std, |
180 | .num_interrupt_in = NUM_DONT_CARE, | |
181 | .num_bulk_in = NUM_DONT_CARE, | |
182 | .num_bulk_out = NUM_DONT_CARE, | |
183 | .num_ports = 4, | |
184 | .attach = whiteheat_attach, | |
185 | .shutdown = whiteheat_shutdown, | |
186 | .open = whiteheat_open, | |
187 | .close = whiteheat_close, | |
188 | .write = whiteheat_write, | |
189 | .write_room = whiteheat_write_room, | |
190 | .ioctl = whiteheat_ioctl, | |
191 | .set_termios = whiteheat_set_termios, | |
192 | .break_ctl = whiteheat_break_ctl, | |
193 | .tiocmget = whiteheat_tiocmget, | |
194 | .tiocmset = whiteheat_tiocmset, | |
195 | .chars_in_buffer = whiteheat_chars_in_buffer, | |
196 | .throttle = whiteheat_throttle, | |
197 | .unthrottle = whiteheat_unthrottle, | |
198 | .read_bulk_callback = whiteheat_read_callback, | |
199 | .write_bulk_callback = whiteheat_write_callback, | |
200 | }; | |
201 | ||
202 | ||
203 | struct whiteheat_command_private { | |
204 | spinlock_t lock; | |
205 | __u8 port_running; | |
206 | __u8 command_finished; | |
207 | wait_queue_head_t wait_command; /* for handling sleeping while waiting for a command to finish */ | |
208 | __u8 result_buffer[64]; | |
209 | }; | |
210 | ||
211 | ||
212 | #define THROTTLED 0x01 | |
213 | #define ACTUALLY_THROTTLED 0x02 | |
214 | ||
215 | static int urb_pool_size = 8; | |
216 | ||
217 | struct whiteheat_urb_wrap { | |
218 | struct list_head list; | |
219 | struct urb *urb; | |
220 | }; | |
221 | ||
222 | struct whiteheat_private { | |
223 | spinlock_t lock; | |
224 | __u8 flags; | |
225 | __u8 mcr; | |
226 | struct list_head rx_urbs_free; | |
227 | struct list_head rx_urbs_submitted; | |
228 | struct list_head rx_urb_q; | |
229 | struct work_struct rx_work; | |
230 | struct list_head tx_urbs_free; | |
231 | struct list_head tx_urbs_submitted; | |
232 | }; | |
233 | ||
234 | ||
235 | /* local function prototypes */ | |
236 | static int start_command_port(struct usb_serial *serial); | |
237 | static void stop_command_port(struct usb_serial *serial); | |
238 | static void command_port_write_callback(struct urb *urb, struct pt_regs *regs); | |
239 | static void command_port_read_callback(struct urb *urb, struct pt_regs *regs); | |
240 | ||
241 | static int start_port_read(struct usb_serial_port *port); | |
242 | static struct whiteheat_urb_wrap *urb_to_wrap(struct urb *urb, struct list_head *head); | |
243 | static struct list_head *list_first(struct list_head *head); | |
244 | static void rx_data_softint(void *private); | |
245 | ||
246 | static int firm_send_command(struct usb_serial_port *port, __u8 command, __u8 *data, __u8 datasize); | |
247 | static int firm_open(struct usb_serial_port *port); | |
248 | static int firm_close(struct usb_serial_port *port); | |
249 | static int firm_setup_port(struct usb_serial_port *port); | |
250 | static int firm_set_rts(struct usb_serial_port *port, __u8 onoff); | |
251 | static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff); | |
252 | static int firm_set_break(struct usb_serial_port *port, __u8 onoff); | |
253 | static int firm_purge(struct usb_serial_port *port, __u8 rxtx); | |
254 | static int firm_get_dtr_rts(struct usb_serial_port *port); | |
255 | static int firm_report_tx_done(struct usb_serial_port *port); | |
256 | ||
257 | ||
258 | #define COMMAND_PORT 4 | |
259 | #define COMMAND_TIMEOUT (2*HZ) /* 2 second timeout for a command */ | |
260 | #define COMMAND_TIMEOUT_MS 2000 | |
261 | #define CLOSING_DELAY (30 * HZ) | |
262 | ||
263 | ||
264 | /***************************************************************************** | |
265 | * Connect Tech's White Heat prerenumeration driver functions | |
266 | *****************************************************************************/ | |
267 | ||
268 | /* steps to download the firmware to the WhiteHEAT device: | |
269 | - hold the reset (by writing to the reset bit of the CPUCS register) | |
270 | - download the VEND_AX.HEX file to the chip using VENDOR_REQUEST-ANCHOR_LOAD | |
271 | - release the reset (by writing to the CPUCS register) | |
272 | - download the WH.HEX file for all addresses greater than 0x1b3f using | |
273 | VENDOR_REQUEST-ANCHOR_EXTERNAL_RAM_LOAD | |
274 | - hold the reset | |
275 | - download the WH.HEX file for all addresses less than 0x1b40 using | |
276 | VENDOR_REQUEST_ANCHOR_LOAD | |
277 | - release the reset | |
278 | - device renumerated itself and comes up as new device id with all | |
279 | firmware download completed. | |
280 | */ | |
281 | static int whiteheat_firmware_download (struct usb_serial *serial, const struct usb_device_id *id) | |
282 | { | |
283 | int response; | |
284 | const struct whiteheat_hex_record *record; | |
285 | ||
286 | dbg("%s", __FUNCTION__); | |
287 | ||
288 | response = ezusb_set_reset (serial, 1); | |
289 | ||
290 | record = &whiteheat_loader[0]; | |
291 | while (record->address != 0xffff) { | |
292 | response = ezusb_writememory (serial, record->address, | |
293 | (unsigned char *)record->data, record->data_size, 0xa0); | |
294 | if (response < 0) { | |
295 | err("%s - ezusb_writememory failed for loader (%d %04X %p %d)", | |
296 | __FUNCTION__, response, record->address, record->data, record->data_size); | |
297 | break; | |
298 | } | |
299 | ++record; | |
300 | } | |
301 | ||
302 | response = ezusb_set_reset (serial, 0); | |
303 | ||
304 | record = &whiteheat_firmware[0]; | |
305 | while (record->address < 0x1b40) { | |
306 | ++record; | |
307 | } | |
308 | while (record->address != 0xffff) { | |
309 | response = ezusb_writememory (serial, record->address, | |
310 | (unsigned char *)record->data, record->data_size, 0xa3); | |
311 | if (response < 0) { | |
312 | err("%s - ezusb_writememory failed for first firmware step (%d %04X %p %d)", | |
313 | __FUNCTION__, response, record->address, record->data, record->data_size); | |
314 | break; | |
315 | } | |
316 | ++record; | |
317 | } | |
318 | ||
319 | response = ezusb_set_reset (serial, 1); | |
320 | ||
321 | record = &whiteheat_firmware[0]; | |
322 | while (record->address < 0x1b40) { | |
323 | response = ezusb_writememory (serial, record->address, | |
324 | (unsigned char *)record->data, record->data_size, 0xa0); | |
325 | if (response < 0) { | |
326 | err("%s - ezusb_writememory failed for second firmware step (%d %04X %p %d)", | |
327 | __FUNCTION__, response, record->address, record->data, record->data_size); | |
328 | break; | |
329 | } | |
330 | ++record; | |
331 | } | |
332 | ||
333 | response = ezusb_set_reset (serial, 0); | |
334 | ||
335 | return 0; | |
336 | } | |
337 | ||
338 | ||
339 | static int whiteheat_firmware_attach (struct usb_serial *serial) | |
340 | { | |
341 | /* We want this device to fail to have a driver assigned to it */ | |
342 | return 1; | |
343 | } | |
344 | ||
345 | ||
346 | /***************************************************************************** | |
347 | * Connect Tech's White Heat serial driver functions | |
348 | *****************************************************************************/ | |
349 | static int whiteheat_attach (struct usb_serial *serial) | |
350 | { | |
351 | struct usb_serial_port *command_port; | |
352 | struct whiteheat_command_private *command_info; | |
353 | struct usb_serial_port *port; | |
354 | struct whiteheat_private *info; | |
355 | struct whiteheat_hw_info *hw_info; | |
356 | int pipe; | |
357 | int ret; | |
358 | int alen; | |
359 | __u8 *command; | |
360 | __u8 *result; | |
361 | int i; | |
362 | int j; | |
363 | struct urb *urb; | |
364 | int buf_size; | |
365 | struct whiteheat_urb_wrap *wrap; | |
366 | struct list_head *tmp; | |
367 | ||
368 | command_port = serial->port[COMMAND_PORT]; | |
369 | ||
370 | pipe = usb_sndbulkpipe (serial->dev, command_port->bulk_out_endpointAddress); | |
371 | command = kmalloc(2, GFP_KERNEL); | |
372 | if (!command) | |
373 | goto no_command_buffer; | |
374 | command[0] = WHITEHEAT_GET_HW_INFO; | |
375 | command[1] = 0; | |
376 | ||
377 | result = kmalloc(sizeof(*hw_info) + 1, GFP_KERNEL); | |
378 | if (!result) | |
379 | goto no_result_buffer; | |
380 | /* | |
381 | * When the module is reloaded the firmware is still there and | |
382 | * the endpoints are still in the usb core unchanged. This is the | |
383 | * unlinking bug in disguise. Same for the call below. | |
384 | */ | |
385 | usb_clear_halt(serial->dev, pipe); | |
386 | ret = usb_bulk_msg (serial->dev, pipe, command, 2, &alen, COMMAND_TIMEOUT_MS); | |
387 | if (ret) { | |
269bda1c | 388 | err("%s: Couldn't send command [%d]", serial->type->description, ret); |
1da177e4 | 389 | goto no_firmware; |
09fd6bc8 | 390 | } else if (alen != 2) { |
269bda1c | 391 | err("%s: Send command incomplete [%d]", serial->type->description, alen); |
1da177e4 LT |
392 | goto no_firmware; |
393 | } | |
394 | ||
395 | pipe = usb_rcvbulkpipe (serial->dev, command_port->bulk_in_endpointAddress); | |
396 | /* See the comment on the usb_clear_halt() above */ | |
397 | usb_clear_halt(serial->dev, pipe); | |
398 | ret = usb_bulk_msg (serial->dev, pipe, result, sizeof(*hw_info) + 1, &alen, COMMAND_TIMEOUT_MS); | |
399 | if (ret) { | |
269bda1c | 400 | err("%s: Couldn't get results [%d]", serial->type->description, ret); |
1da177e4 | 401 | goto no_firmware; |
09fd6bc8 | 402 | } else if (alen != sizeof(*hw_info) + 1) { |
269bda1c | 403 | err("%s: Get results incomplete [%d]", serial->type->description, alen); |
1da177e4 LT |
404 | goto no_firmware; |
405 | } else if (result[0] != command[0]) { | |
269bda1c | 406 | err("%s: Command failed [%d]", serial->type->description, result[0]); |
1da177e4 LT |
407 | goto no_firmware; |
408 | } | |
409 | ||
410 | hw_info = (struct whiteheat_hw_info *)&result[1]; | |
411 | ||
269bda1c | 412 | info("%s: Driver %s: Firmware v%d.%02d", serial->type->description, |
1da177e4 LT |
413 | DRIVER_VERSION, hw_info->sw_major_rev, hw_info->sw_minor_rev); |
414 | ||
415 | for (i = 0; i < serial->num_ports; i++) { | |
416 | port = serial->port[i]; | |
417 | ||
418 | info = (struct whiteheat_private *)kmalloc(sizeof(struct whiteheat_private), GFP_KERNEL); | |
419 | if (info == NULL) { | |
269bda1c | 420 | err("%s: Out of memory for port structures\n", serial->type->description); |
1da177e4 LT |
421 | goto no_private; |
422 | } | |
423 | ||
424 | spin_lock_init(&info->lock); | |
425 | info->flags = 0; | |
426 | info->mcr = 0; | |
427 | INIT_WORK(&info->rx_work, rx_data_softint, port); | |
428 | ||
429 | INIT_LIST_HEAD(&info->rx_urbs_free); | |
430 | INIT_LIST_HEAD(&info->rx_urbs_submitted); | |
431 | INIT_LIST_HEAD(&info->rx_urb_q); | |
432 | INIT_LIST_HEAD(&info->tx_urbs_free); | |
433 | INIT_LIST_HEAD(&info->tx_urbs_submitted); | |
434 | ||
435 | for (j = 0; j < urb_pool_size; j++) { | |
436 | urb = usb_alloc_urb(0, GFP_KERNEL); | |
437 | if (!urb) { | |
438 | err("No free urbs available"); | |
439 | goto no_rx_urb; | |
440 | } | |
441 | buf_size = port->read_urb->transfer_buffer_length; | |
442 | urb->transfer_buffer = kmalloc(buf_size, GFP_KERNEL); | |
443 | if (!urb->transfer_buffer) { | |
444 | err("Couldn't allocate urb buffer"); | |
445 | goto no_rx_buf; | |
446 | } | |
447 | wrap = kmalloc(sizeof(*wrap), GFP_KERNEL); | |
448 | if (!wrap) { | |
449 | err("Couldn't allocate urb wrapper"); | |
450 | goto no_rx_wrap; | |
451 | } | |
452 | usb_fill_bulk_urb(urb, serial->dev, | |
453 | usb_rcvbulkpipe(serial->dev, | |
454 | port->bulk_in_endpointAddress), | |
455 | urb->transfer_buffer, buf_size, | |
456 | whiteheat_read_callback, port); | |
457 | wrap->urb = urb; | |
458 | list_add(&wrap->list, &info->rx_urbs_free); | |
459 | ||
460 | urb = usb_alloc_urb(0, GFP_KERNEL); | |
461 | if (!urb) { | |
462 | err("No free urbs available"); | |
463 | goto no_tx_urb; | |
464 | } | |
465 | buf_size = port->write_urb->transfer_buffer_length; | |
466 | urb->transfer_buffer = kmalloc(buf_size, GFP_KERNEL); | |
467 | if (!urb->transfer_buffer) { | |
468 | err("Couldn't allocate urb buffer"); | |
469 | goto no_tx_buf; | |
470 | } | |
471 | wrap = kmalloc(sizeof(*wrap), GFP_KERNEL); | |
472 | if (!wrap) { | |
473 | err("Couldn't allocate urb wrapper"); | |
474 | goto no_tx_wrap; | |
475 | } | |
476 | usb_fill_bulk_urb(urb, serial->dev, | |
477 | usb_sndbulkpipe(serial->dev, | |
478 | port->bulk_out_endpointAddress), | |
479 | urb->transfer_buffer, buf_size, | |
480 | whiteheat_write_callback, port); | |
481 | wrap->urb = urb; | |
482 | list_add(&wrap->list, &info->tx_urbs_free); | |
483 | } | |
484 | ||
485 | usb_set_serial_port_data(port, info); | |
486 | } | |
487 | ||
488 | command_info = (struct whiteheat_command_private *)kmalloc(sizeof(struct whiteheat_command_private), GFP_KERNEL); | |
489 | if (command_info == NULL) { | |
269bda1c | 490 | err("%s: Out of memory for port structures\n", serial->type->description); |
1da177e4 LT |
491 | goto no_command_private; |
492 | } | |
493 | ||
494 | spin_lock_init(&command_info->lock); | |
495 | command_info->port_running = 0; | |
496 | init_waitqueue_head(&command_info->wait_command); | |
497 | usb_set_serial_port_data(command_port, command_info); | |
498 | command_port->write_urb->complete = command_port_write_callback; | |
499 | command_port->read_urb->complete = command_port_read_callback; | |
500 | kfree(result); | |
501 | kfree(command); | |
502 | ||
503 | return 0; | |
504 | ||
505 | no_firmware: | |
506 | /* Firmware likely not running */ | |
269bda1c GKH |
507 | err("%s: Unable to retrieve firmware version, try replugging\n", serial->type->description); |
508 | err("%s: If the firmware is not running (status led not blinking)\n", serial->type->description); | |
509 | err("%s: please contact support@connecttech.com\n", serial->type->description); | |
67ca0284 | 510 | kfree(result); |
1da177e4 LT |
511 | return -ENODEV; |
512 | ||
513 | no_command_private: | |
514 | for (i = serial->num_ports - 1; i >= 0; i--) { | |
515 | port = serial->port[i]; | |
516 | info = usb_get_serial_port_data(port); | |
517 | for (j = urb_pool_size - 1; j >= 0; j--) { | |
518 | tmp = list_first(&info->tx_urbs_free); | |
519 | list_del(tmp); | |
520 | wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); | |
521 | urb = wrap->urb; | |
522 | kfree(wrap); | |
523 | no_tx_wrap: | |
524 | kfree(urb->transfer_buffer); | |
525 | no_tx_buf: | |
526 | usb_free_urb(urb); | |
527 | no_tx_urb: | |
528 | tmp = list_first(&info->rx_urbs_free); | |
529 | list_del(tmp); | |
530 | wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); | |
531 | urb = wrap->urb; | |
532 | kfree(wrap); | |
533 | no_rx_wrap: | |
534 | kfree(urb->transfer_buffer); | |
535 | no_rx_buf: | |
536 | usb_free_urb(urb); | |
537 | no_rx_urb: | |
538 | ; | |
539 | } | |
540 | kfree(info); | |
541 | no_private: | |
542 | ; | |
543 | } | |
544 | kfree(result); | |
545 | no_result_buffer: | |
546 | kfree(command); | |
547 | no_command_buffer: | |
548 | return -ENOMEM; | |
549 | } | |
550 | ||
551 | ||
552 | static void whiteheat_shutdown (struct usb_serial *serial) | |
553 | { | |
554 | struct usb_serial_port *command_port; | |
555 | struct usb_serial_port *port; | |
556 | struct whiteheat_private *info; | |
557 | struct whiteheat_urb_wrap *wrap; | |
558 | struct urb *urb; | |
559 | struct list_head *tmp; | |
560 | struct list_head *tmp2; | |
561 | int i; | |
562 | ||
563 | dbg("%s", __FUNCTION__); | |
564 | ||
565 | /* free up our private data for our command port */ | |
566 | command_port = serial->port[COMMAND_PORT]; | |
567 | kfree (usb_get_serial_port_data(command_port)); | |
568 | ||
569 | for (i = 0; i < serial->num_ports; i++) { | |
570 | port = serial->port[i]; | |
571 | info = usb_get_serial_port_data(port); | |
572 | list_for_each_safe(tmp, tmp2, &info->rx_urbs_free) { | |
573 | list_del(tmp); | |
574 | wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); | |
575 | urb = wrap->urb; | |
576 | kfree(wrap); | |
577 | kfree(urb->transfer_buffer); | |
578 | usb_free_urb(urb); | |
579 | } | |
580 | list_for_each_safe(tmp, tmp2, &info->tx_urbs_free) { | |
581 | list_del(tmp); | |
582 | wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); | |
583 | urb = wrap->urb; | |
584 | kfree(wrap); | |
585 | kfree(urb->transfer_buffer); | |
586 | usb_free_urb(urb); | |
587 | } | |
588 | kfree(info); | |
589 | } | |
590 | ||
591 | return; | |
592 | } | |
593 | ||
594 | ||
595 | static int whiteheat_open (struct usb_serial_port *port, struct file *filp) | |
596 | { | |
597 | int retval = 0; | |
598 | struct termios old_term; | |
599 | ||
600 | dbg("%s - port %d", __FUNCTION__, port->number); | |
601 | ||
602 | retval = start_command_port(port->serial); | |
603 | if (retval) | |
604 | goto exit; | |
605 | ||
606 | if (port->tty) | |
607 | port->tty->low_latency = 1; | |
608 | ||
609 | /* send an open port command */ | |
610 | retval = firm_open(port); | |
611 | if (retval) { | |
612 | stop_command_port(port->serial); | |
613 | goto exit; | |
614 | } | |
615 | ||
616 | retval = firm_purge(port, WHITEHEAT_PURGE_RX | WHITEHEAT_PURGE_TX); | |
617 | if (retval) { | |
618 | firm_close(port); | |
619 | stop_command_port(port->serial); | |
620 | goto exit; | |
621 | } | |
622 | ||
623 | old_term.c_cflag = ~port->tty->termios->c_cflag; | |
624 | old_term.c_iflag = ~port->tty->termios->c_iflag; | |
625 | whiteheat_set_termios(port, &old_term); | |
626 | ||
627 | /* Work around HCD bugs */ | |
628 | usb_clear_halt(port->serial->dev, port->read_urb->pipe); | |
629 | usb_clear_halt(port->serial->dev, port->write_urb->pipe); | |
630 | ||
631 | /* Start reading from the device */ | |
632 | retval = start_port_read(port); | |
633 | if (retval) { | |
634 | err("%s - failed submitting read urb, error %d", __FUNCTION__, retval); | |
635 | firm_close(port); | |
636 | stop_command_port(port->serial); | |
637 | goto exit; | |
638 | } | |
639 | ||
640 | exit: | |
641 | dbg("%s - exit, retval = %d", __FUNCTION__, retval); | |
642 | return retval; | |
643 | } | |
644 | ||
645 | ||
646 | static void whiteheat_close(struct usb_serial_port *port, struct file * filp) | |
647 | { | |
648 | struct whiteheat_private *info = usb_get_serial_port_data(port); | |
649 | struct whiteheat_urb_wrap *wrap; | |
650 | struct urb *urb; | |
651 | struct list_head *tmp; | |
652 | struct list_head *tmp2; | |
653 | unsigned long flags; | |
654 | ||
655 | dbg("%s - port %d", __FUNCTION__, port->number); | |
656 | ||
657 | /* filp is NULL when called from usb_serial_disconnect */ | |
658 | if (filp && (tty_hung_up_p(filp))) { | |
659 | return; | |
660 | } | |
661 | ||
662 | port->tty->closing = 1; | |
663 | ||
664 | /* | |
665 | * Not currently in use; tty_wait_until_sent() calls | |
666 | * serial_chars_in_buffer() which deadlocks on the second semaphore | |
667 | * acquisition. This should be fixed at some point. Greg's been | |
668 | * notified. | |
669 | if ((filp->f_flags & (O_NDELAY | O_NONBLOCK)) == 0) { | |
670 | tty_wait_until_sent(port->tty, CLOSING_DELAY); | |
671 | } | |
672 | */ | |
673 | ||
674 | if (port->tty->driver->flush_buffer) | |
675 | port->tty->driver->flush_buffer(port->tty); | |
676 | tty_ldisc_flush(port->tty); | |
677 | ||
678 | firm_report_tx_done(port); | |
679 | ||
680 | firm_close(port); | |
681 | ||
682 | /* shutdown our bulk reads and writes */ | |
683 | spin_lock_irqsave(&info->lock, flags); | |
684 | list_for_each_safe(tmp, tmp2, &info->rx_urbs_submitted) { | |
685 | wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); | |
686 | urb = wrap->urb; | |
687 | usb_kill_urb(urb); | |
179e0917 | 688 | list_move(tmp, &info->rx_urbs_free); |
1da177e4 | 689 | } |
179e0917 AM |
690 | list_for_each_safe(tmp, tmp2, &info->rx_urb_q) |
691 | list_move(tmp, &info->rx_urbs_free); | |
692 | ||
1da177e4 LT |
693 | list_for_each_safe(tmp, tmp2, &info->tx_urbs_submitted) { |
694 | wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); | |
695 | urb = wrap->urb; | |
696 | usb_kill_urb(urb); | |
179e0917 | 697 | list_move(tmp, &info->tx_urbs_free); |
1da177e4 LT |
698 | } |
699 | spin_unlock_irqrestore(&info->lock, flags); | |
700 | ||
701 | stop_command_port(port->serial); | |
702 | ||
703 | port->tty->closing = 0; | |
704 | } | |
705 | ||
706 | ||
707 | static int whiteheat_write(struct usb_serial_port *port, const unsigned char *buf, int count) | |
708 | { | |
709 | struct usb_serial *serial = port->serial; | |
710 | struct whiteheat_private *info = usb_get_serial_port_data(port); | |
711 | struct whiteheat_urb_wrap *wrap; | |
712 | struct urb *urb; | |
713 | int result; | |
714 | int bytes; | |
715 | int sent = 0; | |
716 | unsigned long flags; | |
717 | struct list_head *tmp; | |
718 | ||
719 | dbg("%s - port %d", __FUNCTION__, port->number); | |
720 | ||
721 | if (count == 0) { | |
722 | dbg("%s - write request of 0 bytes", __FUNCTION__); | |
723 | return (0); | |
724 | } | |
725 | ||
726 | while (count) { | |
727 | spin_lock_irqsave(&info->lock, flags); | |
728 | if (list_empty(&info->tx_urbs_free)) { | |
729 | spin_unlock_irqrestore(&info->lock, flags); | |
730 | break; | |
731 | } | |
732 | tmp = list_first(&info->tx_urbs_free); | |
733 | list_del(tmp); | |
734 | spin_unlock_irqrestore(&info->lock, flags); | |
735 | ||
736 | wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); | |
737 | urb = wrap->urb; | |
738 | bytes = (count > port->bulk_out_size) ? port->bulk_out_size : count; | |
739 | memcpy (urb->transfer_buffer, buf + sent, bytes); | |
740 | ||
741 | usb_serial_debug_data(debug, &port->dev, __FUNCTION__, bytes, urb->transfer_buffer); | |
742 | ||
743 | urb->dev = serial->dev; | |
744 | urb->transfer_buffer_length = bytes; | |
745 | result = usb_submit_urb(urb, GFP_ATOMIC); | |
746 | if (result) { | |
747 | err("%s - failed submitting write urb, error %d", __FUNCTION__, result); | |
748 | sent = result; | |
749 | spin_lock_irqsave(&info->lock, flags); | |
750 | list_add(tmp, &info->tx_urbs_free); | |
751 | spin_unlock_irqrestore(&info->lock, flags); | |
752 | break; | |
753 | } else { | |
754 | sent += bytes; | |
755 | count -= bytes; | |
756 | spin_lock_irqsave(&info->lock, flags); | |
757 | list_add(tmp, &info->tx_urbs_submitted); | |
758 | spin_unlock_irqrestore(&info->lock, flags); | |
759 | } | |
760 | } | |
761 | ||
762 | return sent; | |
763 | } | |
764 | ||
765 | ||
766 | static int whiteheat_write_room(struct usb_serial_port *port) | |
767 | { | |
768 | struct whiteheat_private *info = usb_get_serial_port_data(port); | |
769 | struct list_head *tmp; | |
770 | int room = 0; | |
771 | unsigned long flags; | |
772 | ||
773 | dbg("%s - port %d", __FUNCTION__, port->number); | |
774 | ||
775 | spin_lock_irqsave(&info->lock, flags); | |
776 | list_for_each(tmp, &info->tx_urbs_free) | |
777 | room++; | |
778 | spin_unlock_irqrestore(&info->lock, flags); | |
779 | room *= port->bulk_out_size; | |
780 | ||
781 | dbg("%s - returns %d", __FUNCTION__, room); | |
782 | return (room); | |
783 | } | |
784 | ||
785 | ||
786 | static int whiteheat_tiocmget (struct usb_serial_port *port, struct file *file) | |
787 | { | |
788 | struct whiteheat_private *info = usb_get_serial_port_data(port); | |
789 | unsigned int modem_signals = 0; | |
790 | ||
791 | dbg("%s - port %d", __FUNCTION__, port->number); | |
792 | ||
793 | firm_get_dtr_rts(port); | |
794 | if (info->mcr & UART_MCR_DTR) | |
795 | modem_signals |= TIOCM_DTR; | |
796 | if (info->mcr & UART_MCR_RTS) | |
797 | modem_signals |= TIOCM_RTS; | |
798 | ||
799 | return modem_signals; | |
800 | } | |
801 | ||
802 | ||
803 | static int whiteheat_tiocmset (struct usb_serial_port *port, struct file *file, | |
804 | unsigned int set, unsigned int clear) | |
805 | { | |
806 | struct whiteheat_private *info = usb_get_serial_port_data(port); | |
807 | ||
808 | dbg("%s - port %d", __FUNCTION__, port->number); | |
809 | ||
810 | if (set & TIOCM_RTS) | |
811 | info->mcr |= UART_MCR_RTS; | |
812 | if (set & TIOCM_DTR) | |
813 | info->mcr |= UART_MCR_DTR; | |
814 | ||
815 | if (clear & TIOCM_RTS) | |
816 | info->mcr &= ~UART_MCR_RTS; | |
817 | if (clear & TIOCM_DTR) | |
818 | info->mcr &= ~UART_MCR_DTR; | |
819 | ||
820 | firm_set_dtr(port, info->mcr & UART_MCR_DTR); | |
821 | firm_set_rts(port, info->mcr & UART_MCR_RTS); | |
822 | return 0; | |
823 | } | |
824 | ||
825 | ||
826 | static int whiteheat_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg) | |
827 | { | |
828 | struct serial_struct serstruct; | |
829 | void __user *user_arg = (void __user *)arg; | |
830 | ||
831 | dbg("%s - port %d, cmd 0x%.4x", __FUNCTION__, port->number, cmd); | |
832 | ||
833 | switch (cmd) { | |
834 | case TIOCGSERIAL: | |
835 | memset(&serstruct, 0, sizeof(serstruct)); | |
836 | serstruct.type = PORT_16654; | |
837 | serstruct.line = port->serial->minor; | |
838 | serstruct.port = port->number; | |
839 | serstruct.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; | |
840 | serstruct.xmit_fifo_size = port->bulk_out_size; | |
841 | serstruct.custom_divisor = 0; | |
842 | serstruct.baud_base = 460800; | |
843 | serstruct.close_delay = CLOSING_DELAY; | |
844 | serstruct.closing_wait = CLOSING_DELAY; | |
845 | ||
846 | if (copy_to_user(user_arg, &serstruct, sizeof(serstruct))) | |
847 | return -EFAULT; | |
848 | ||
849 | break; | |
850 | ||
851 | case TIOCSSERIAL: | |
852 | if (copy_from_user(&serstruct, user_arg, sizeof(serstruct))) | |
853 | return -EFAULT; | |
854 | ||
855 | /* | |
856 | * For now this is ignored. dip sets the ASYNC_[V]HI flags | |
857 | * but this isn't used by us at all. Maybe someone somewhere | |
858 | * will need the custom_divisor setting. | |
859 | */ | |
860 | ||
861 | break; | |
862 | ||
863 | default: | |
864 | break; | |
865 | } | |
866 | ||
867 | return -ENOIOCTLCMD; | |
868 | } | |
869 | ||
870 | ||
871 | static void whiteheat_set_termios (struct usb_serial_port *port, struct termios *old_termios) | |
872 | { | |
873 | dbg("%s -port %d", __FUNCTION__, port->number); | |
874 | ||
875 | if ((!port->tty) || (!port->tty->termios)) { | |
876 | dbg("%s - no tty structures", __FUNCTION__); | |
877 | goto exit; | |
878 | } | |
879 | ||
880 | /* check that they really want us to change something */ | |
881 | if (old_termios) { | |
882 | if ((port->tty->termios->c_cflag == old_termios->c_cflag) && | |
883 | (port->tty->termios->c_iflag == old_termios->c_iflag)) { | |
884 | dbg("%s - nothing to change...", __FUNCTION__); | |
885 | goto exit; | |
886 | } | |
887 | } | |
888 | ||
889 | firm_setup_port(port); | |
890 | ||
891 | exit: | |
892 | return; | |
893 | } | |
894 | ||
895 | ||
896 | static void whiteheat_break_ctl(struct usb_serial_port *port, int break_state) { | |
897 | firm_set_break(port, break_state); | |
898 | } | |
899 | ||
900 | ||
901 | static int whiteheat_chars_in_buffer(struct usb_serial_port *port) | |
902 | { | |
903 | struct whiteheat_private *info = usb_get_serial_port_data(port); | |
904 | struct list_head *tmp; | |
905 | struct whiteheat_urb_wrap *wrap; | |
906 | int chars = 0; | |
907 | unsigned long flags; | |
908 | ||
909 | dbg("%s - port %d", __FUNCTION__, port->number); | |
910 | ||
911 | spin_lock_irqsave(&info->lock, flags); | |
912 | list_for_each(tmp, &info->tx_urbs_submitted) { | |
913 | wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); | |
914 | chars += wrap->urb->transfer_buffer_length; | |
915 | } | |
916 | spin_unlock_irqrestore(&info->lock, flags); | |
917 | ||
918 | dbg ("%s - returns %d", __FUNCTION__, chars); | |
919 | return (chars); | |
920 | } | |
921 | ||
922 | ||
923 | static void whiteheat_throttle (struct usb_serial_port *port) | |
924 | { | |
925 | struct whiteheat_private *info = usb_get_serial_port_data(port); | |
926 | unsigned long flags; | |
927 | ||
928 | dbg("%s - port %d", __FUNCTION__, port->number); | |
929 | ||
930 | spin_lock_irqsave(&info->lock, flags); | |
931 | info->flags |= THROTTLED; | |
932 | spin_unlock_irqrestore(&info->lock, flags); | |
933 | ||
934 | return; | |
935 | } | |
936 | ||
937 | ||
938 | static void whiteheat_unthrottle (struct usb_serial_port *port) | |
939 | { | |
940 | struct whiteheat_private *info = usb_get_serial_port_data(port); | |
941 | int actually_throttled; | |
942 | unsigned long flags; | |
943 | ||
944 | dbg("%s - port %d", __FUNCTION__, port->number); | |
945 | ||
946 | spin_lock_irqsave(&info->lock, flags); | |
947 | actually_throttled = info->flags & ACTUALLY_THROTTLED; | |
948 | info->flags &= ~(THROTTLED | ACTUALLY_THROTTLED); | |
949 | spin_unlock_irqrestore(&info->lock, flags); | |
950 | ||
951 | if (actually_throttled) | |
952 | rx_data_softint(port); | |
953 | ||
954 | return; | |
955 | } | |
956 | ||
957 | ||
958 | /***************************************************************************** | |
959 | * Connect Tech's White Heat callback routines | |
960 | *****************************************************************************/ | |
961 | static void command_port_write_callback (struct urb *urb, struct pt_regs *regs) | |
962 | { | |
963 | dbg("%s", __FUNCTION__); | |
964 | ||
965 | if (urb->status) { | |
966 | dbg ("nonzero urb status: %d", urb->status); | |
967 | return; | |
968 | } | |
969 | } | |
970 | ||
971 | ||
972 | static void command_port_read_callback (struct urb *urb, struct pt_regs *regs) | |
973 | { | |
974 | struct usb_serial_port *command_port = (struct usb_serial_port *)urb->context; | |
975 | struct whiteheat_command_private *command_info; | |
976 | unsigned char *data = urb->transfer_buffer; | |
977 | int result; | |
978 | unsigned long flags; | |
979 | ||
980 | dbg("%s", __FUNCTION__); | |
981 | ||
982 | if (urb->status) { | |
983 | dbg("%s - nonzero urb status: %d", __FUNCTION__, urb->status); | |
984 | return; | |
985 | } | |
986 | ||
987 | usb_serial_debug_data(debug, &command_port->dev, __FUNCTION__, urb->actual_length, data); | |
988 | ||
989 | command_info = usb_get_serial_port_data(command_port); | |
990 | if (!command_info) { | |
991 | dbg ("%s - command_info is NULL, exiting.", __FUNCTION__); | |
992 | return; | |
993 | } | |
994 | spin_lock_irqsave(&command_info->lock, flags); | |
995 | ||
996 | if (data[0] == WHITEHEAT_CMD_COMPLETE) { | |
997 | command_info->command_finished = WHITEHEAT_CMD_COMPLETE; | |
998 | wake_up_interruptible(&command_info->wait_command); | |
999 | } else if (data[0] == WHITEHEAT_CMD_FAILURE) { | |
1000 | command_info->command_finished = WHITEHEAT_CMD_FAILURE; | |
1001 | wake_up_interruptible(&command_info->wait_command); | |
1002 | } else if (data[0] == WHITEHEAT_EVENT) { | |
1003 | /* These are unsolicited reports from the firmware, hence no waiting command to wakeup */ | |
1004 | dbg("%s - event received", __FUNCTION__); | |
1005 | } else if (data[0] == WHITEHEAT_GET_DTR_RTS) { | |
1006 | memcpy(command_info->result_buffer, &data[1], urb->actual_length - 1); | |
1007 | command_info->command_finished = WHITEHEAT_CMD_COMPLETE; | |
1008 | wake_up_interruptible(&command_info->wait_command); | |
1009 | } else { | |
1010 | dbg("%s - bad reply from firmware", __FUNCTION__); | |
1011 | } | |
1012 | ||
1013 | /* Continue trying to always read */ | |
1014 | command_port->read_urb->dev = command_port->serial->dev; | |
1015 | result = usb_submit_urb(command_port->read_urb, GFP_ATOMIC); | |
1016 | spin_unlock_irqrestore(&command_info->lock, flags); | |
1017 | if (result) | |
1018 | dbg("%s - failed resubmitting read urb, error %d", __FUNCTION__, result); | |
1019 | } | |
1020 | ||
1021 | ||
1022 | static void whiteheat_read_callback(struct urb *urb, struct pt_regs *regs) | |
1023 | { | |
1024 | struct usb_serial_port *port = (struct usb_serial_port *)urb->context; | |
1025 | struct whiteheat_urb_wrap *wrap; | |
1026 | unsigned char *data = urb->transfer_buffer; | |
1027 | struct whiteheat_private *info = usb_get_serial_port_data(port); | |
1028 | ||
1029 | dbg("%s - port %d", __FUNCTION__, port->number); | |
1030 | ||
1031 | spin_lock(&info->lock); | |
1032 | wrap = urb_to_wrap(urb, &info->rx_urbs_submitted); | |
1033 | if (!wrap) { | |
1034 | spin_unlock(&info->lock); | |
1035 | err("%s - Not my urb!", __FUNCTION__); | |
1036 | return; | |
1037 | } | |
1038 | list_del(&wrap->list); | |
1039 | spin_unlock(&info->lock); | |
1040 | ||
1041 | if (urb->status) { | |
1042 | dbg("%s - nonzero read bulk status received: %d", __FUNCTION__, urb->status); | |
1043 | spin_lock(&info->lock); | |
1044 | list_add(&wrap->list, &info->rx_urbs_free); | |
1045 | spin_unlock(&info->lock); | |
1046 | return; | |
1047 | } | |
1048 | ||
1049 | usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data); | |
1050 | ||
1051 | spin_lock(&info->lock); | |
1052 | list_add_tail(&wrap->list, &info->rx_urb_q); | |
1053 | if (info->flags & THROTTLED) { | |
1054 | info->flags |= ACTUALLY_THROTTLED; | |
1055 | spin_unlock(&info->lock); | |
1056 | return; | |
1057 | } | |
1058 | spin_unlock(&info->lock); | |
1059 | ||
1060 | schedule_work(&info->rx_work); | |
1061 | } | |
1062 | ||
1063 | ||
1064 | static void whiteheat_write_callback(struct urb *urb, struct pt_regs *regs) | |
1065 | { | |
1066 | struct usb_serial_port *port = (struct usb_serial_port *)urb->context; | |
1067 | struct whiteheat_private *info = usb_get_serial_port_data(port); | |
1068 | struct whiteheat_urb_wrap *wrap; | |
1069 | ||
1070 | dbg("%s - port %d", __FUNCTION__, port->number); | |
1071 | ||
1072 | spin_lock(&info->lock); | |
1073 | wrap = urb_to_wrap(urb, &info->tx_urbs_submitted); | |
1074 | if (!wrap) { | |
1075 | spin_unlock(&info->lock); | |
1076 | err("%s - Not my urb!", __FUNCTION__); | |
1077 | return; | |
1078 | } | |
179e0917 | 1079 | list_move(&wrap->list, &info->tx_urbs_free); |
1da177e4 LT |
1080 | spin_unlock(&info->lock); |
1081 | ||
1082 | if (urb->status) { | |
1083 | dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status); | |
1084 | return; | |
1085 | } | |
1086 | ||
cf2c7481 | 1087 | usb_serial_port_softint(port); |
1da177e4 LT |
1088 | } |
1089 | ||
1090 | ||
1091 | /***************************************************************************** | |
1092 | * Connect Tech's White Heat firmware interface | |
1093 | *****************************************************************************/ | |
1094 | static int firm_send_command (struct usb_serial_port *port, __u8 command, __u8 *data, __u8 datasize) | |
1095 | { | |
1096 | struct usb_serial_port *command_port; | |
1097 | struct whiteheat_command_private *command_info; | |
1098 | struct whiteheat_private *info; | |
1099 | __u8 *transfer_buffer; | |
1100 | int retval = 0; | |
1101 | unsigned long flags; | |
1102 | ||
1103 | dbg("%s - command %d", __FUNCTION__, command); | |
1104 | ||
1105 | command_port = port->serial->port[COMMAND_PORT]; | |
1106 | command_info = usb_get_serial_port_data(command_port); | |
1107 | spin_lock_irqsave(&command_info->lock, flags); | |
1108 | command_info->command_finished = FALSE; | |
1109 | ||
1110 | transfer_buffer = (__u8 *)command_port->write_urb->transfer_buffer; | |
1111 | transfer_buffer[0] = command; | |
1112 | memcpy (&transfer_buffer[1], data, datasize); | |
1113 | command_port->write_urb->transfer_buffer_length = datasize + 1; | |
1114 | command_port->write_urb->dev = port->serial->dev; | |
1115 | retval = usb_submit_urb (command_port->write_urb, GFP_KERNEL); | |
1116 | if (retval) { | |
1117 | dbg("%s - submit urb failed", __FUNCTION__); | |
1118 | goto exit; | |
1119 | } | |
1120 | spin_unlock_irqrestore(&command_info->lock, flags); | |
1121 | ||
1122 | /* wait for the command to complete */ | |
1123 | wait_event_interruptible_timeout(command_info->wait_command, | |
1124 | (command_info->command_finished != FALSE), COMMAND_TIMEOUT); | |
1125 | ||
1126 | spin_lock_irqsave(&command_info->lock, flags); | |
1127 | ||
1128 | if (command_info->command_finished == FALSE) { | |
1129 | dbg("%s - command timed out.", __FUNCTION__); | |
1130 | retval = -ETIMEDOUT; | |
1131 | goto exit; | |
1132 | } | |
1133 | ||
1134 | if (command_info->command_finished == WHITEHEAT_CMD_FAILURE) { | |
1135 | dbg("%s - command failed.", __FUNCTION__); | |
1136 | retval = -EIO; | |
1137 | goto exit; | |
1138 | } | |
1139 | ||
1140 | if (command_info->command_finished == WHITEHEAT_CMD_COMPLETE) { | |
1141 | dbg("%s - command completed.", __FUNCTION__); | |
1142 | switch (command) { | |
1143 | case WHITEHEAT_GET_DTR_RTS: | |
1144 | info = usb_get_serial_port_data(port); | |
1145 | memcpy(&info->mcr, command_info->result_buffer, sizeof(struct whiteheat_dr_info)); | |
1146 | break; | |
1147 | } | |
1148 | } | |
1149 | ||
1150 | exit: | |
1151 | spin_unlock_irqrestore(&command_info->lock, flags); | |
1152 | return retval; | |
1153 | } | |
1154 | ||
1155 | ||
1156 | static int firm_open(struct usb_serial_port *port) { | |
1157 | struct whiteheat_simple open_command; | |
1158 | ||
1159 | open_command.port = port->number - port->serial->minor + 1; | |
1160 | return firm_send_command(port, WHITEHEAT_OPEN, (__u8 *)&open_command, sizeof(open_command)); | |
1161 | } | |
1162 | ||
1163 | ||
1164 | static int firm_close(struct usb_serial_port *port) { | |
1165 | struct whiteheat_simple close_command; | |
1166 | ||
1167 | close_command.port = port->number - port->serial->minor + 1; | |
1168 | return firm_send_command(port, WHITEHEAT_CLOSE, (__u8 *)&close_command, sizeof(close_command)); | |
1169 | } | |
1170 | ||
1171 | ||
1172 | static int firm_setup_port(struct usb_serial_port *port) { | |
1173 | struct whiteheat_port_settings port_settings; | |
1174 | unsigned int cflag = port->tty->termios->c_cflag; | |
1175 | ||
1176 | port_settings.port = port->number + 1; | |
1177 | ||
1178 | /* get the byte size */ | |
1179 | switch (cflag & CSIZE) { | |
1180 | case CS5: port_settings.bits = 5; break; | |
1181 | case CS6: port_settings.bits = 6; break; | |
1182 | case CS7: port_settings.bits = 7; break; | |
1183 | default: | |
1184 | case CS8: port_settings.bits = 8; break; | |
1185 | } | |
1186 | dbg("%s - data bits = %d", __FUNCTION__, port_settings.bits); | |
1187 | ||
1188 | /* determine the parity */ | |
1189 | if (cflag & PARENB) | |
1190 | if (cflag & CMSPAR) | |
1191 | if (cflag & PARODD) | |
1192 | port_settings.parity = WHITEHEAT_PAR_MARK; | |
1193 | else | |
1194 | port_settings.parity = WHITEHEAT_PAR_SPACE; | |
1195 | else | |
1196 | if (cflag & PARODD) | |
1197 | port_settings.parity = WHITEHEAT_PAR_ODD; | |
1198 | else | |
1199 | port_settings.parity = WHITEHEAT_PAR_EVEN; | |
1200 | else | |
1201 | port_settings.parity = WHITEHEAT_PAR_NONE; | |
1202 | dbg("%s - parity = %c", __FUNCTION__, port_settings.parity); | |
1203 | ||
1204 | /* figure out the stop bits requested */ | |
1205 | if (cflag & CSTOPB) | |
1206 | port_settings.stop = 2; | |
1207 | else | |
1208 | port_settings.stop = 1; | |
1209 | dbg("%s - stop bits = %d", __FUNCTION__, port_settings.stop); | |
1210 | ||
1211 | /* figure out the flow control settings */ | |
1212 | if (cflag & CRTSCTS) | |
1213 | port_settings.hflow = (WHITEHEAT_HFLOW_CTS | WHITEHEAT_HFLOW_RTS); | |
1214 | else | |
1215 | port_settings.hflow = WHITEHEAT_HFLOW_NONE; | |
1216 | dbg("%s - hardware flow control = %s %s %s %s", __FUNCTION__, | |
1217 | (port_settings.hflow & WHITEHEAT_HFLOW_CTS) ? "CTS" : "", | |
1218 | (port_settings.hflow & WHITEHEAT_HFLOW_RTS) ? "RTS" : "", | |
1219 | (port_settings.hflow & WHITEHEAT_HFLOW_DSR) ? "DSR" : "", | |
1220 | (port_settings.hflow & WHITEHEAT_HFLOW_DTR) ? "DTR" : ""); | |
1221 | ||
1222 | /* determine software flow control */ | |
1223 | if (I_IXOFF(port->tty)) | |
1224 | port_settings.sflow = WHITEHEAT_SFLOW_RXTX; | |
1225 | else | |
1226 | port_settings.sflow = WHITEHEAT_SFLOW_NONE; | |
1227 | dbg("%s - software flow control = %c", __FUNCTION__, port_settings.sflow); | |
1228 | ||
1229 | port_settings.xon = START_CHAR(port->tty); | |
1230 | port_settings.xoff = STOP_CHAR(port->tty); | |
1231 | dbg("%s - XON = %2x, XOFF = %2x", __FUNCTION__, port_settings.xon, port_settings.xoff); | |
1232 | ||
1233 | /* get the baud rate wanted */ | |
1234 | port_settings.baud = tty_get_baud_rate(port->tty); | |
1235 | dbg("%s - baud rate = %d", __FUNCTION__, port_settings.baud); | |
1236 | ||
1237 | /* handle any settings that aren't specified in the tty structure */ | |
1238 | port_settings.lloop = 0; | |
1239 | ||
1240 | /* now send the message to the device */ | |
1241 | return firm_send_command(port, WHITEHEAT_SETUP_PORT, (__u8 *)&port_settings, sizeof(port_settings)); | |
1242 | } | |
1243 | ||
1244 | ||
1245 | static int firm_set_rts(struct usb_serial_port *port, __u8 onoff) { | |
1246 | struct whiteheat_set_rdb rts_command; | |
1247 | ||
1248 | rts_command.port = port->number - port->serial->minor + 1; | |
1249 | rts_command.state = onoff; | |
1250 | return firm_send_command(port, WHITEHEAT_SET_RTS, (__u8 *)&rts_command, sizeof(rts_command)); | |
1251 | } | |
1252 | ||
1253 | ||
1254 | static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff) { | |
1255 | struct whiteheat_set_rdb dtr_command; | |
1256 | ||
1257 | dtr_command.port = port->number - port->serial->minor + 1; | |
1258 | dtr_command.state = onoff; | |
1259 | return firm_send_command(port, WHITEHEAT_SET_RTS, (__u8 *)&dtr_command, sizeof(dtr_command)); | |
1260 | } | |
1261 | ||
1262 | ||
1263 | static int firm_set_break(struct usb_serial_port *port, __u8 onoff) { | |
1264 | struct whiteheat_set_rdb break_command; | |
1265 | ||
1266 | break_command.port = port->number - port->serial->minor + 1; | |
1267 | break_command.state = onoff; | |
1268 | return firm_send_command(port, WHITEHEAT_SET_RTS, (__u8 *)&break_command, sizeof(break_command)); | |
1269 | } | |
1270 | ||
1271 | ||
1272 | static int firm_purge(struct usb_serial_port *port, __u8 rxtx) { | |
1273 | struct whiteheat_purge purge_command; | |
1274 | ||
1275 | purge_command.port = port->number - port->serial->minor + 1; | |
1276 | purge_command.what = rxtx; | |
1277 | return firm_send_command(port, WHITEHEAT_PURGE, (__u8 *)&purge_command, sizeof(purge_command)); | |
1278 | } | |
1279 | ||
1280 | ||
1281 | static int firm_get_dtr_rts(struct usb_serial_port *port) { | |
1282 | struct whiteheat_simple get_dr_command; | |
1283 | ||
1284 | get_dr_command.port = port->number - port->serial->minor + 1; | |
1285 | return firm_send_command(port, WHITEHEAT_GET_DTR_RTS, (__u8 *)&get_dr_command, sizeof(get_dr_command)); | |
1286 | } | |
1287 | ||
1288 | ||
1289 | static int firm_report_tx_done(struct usb_serial_port *port) { | |
1290 | struct whiteheat_simple close_command; | |
1291 | ||
1292 | close_command.port = port->number - port->serial->minor + 1; | |
1293 | return firm_send_command(port, WHITEHEAT_REPORT_TX_DONE, (__u8 *)&close_command, sizeof(close_command)); | |
1294 | } | |
1295 | ||
1296 | ||
1297 | /***************************************************************************** | |
1298 | * Connect Tech's White Heat utility functions | |
1299 | *****************************************************************************/ | |
1300 | static int start_command_port(struct usb_serial *serial) | |
1301 | { | |
1302 | struct usb_serial_port *command_port; | |
1303 | struct whiteheat_command_private *command_info; | |
1304 | unsigned long flags; | |
1305 | int retval = 0; | |
1306 | ||
1307 | command_port = serial->port[COMMAND_PORT]; | |
1308 | command_info = usb_get_serial_port_data(command_port); | |
1309 | spin_lock_irqsave(&command_info->lock, flags); | |
1310 | if (!command_info->port_running) { | |
1311 | /* Work around HCD bugs */ | |
1312 | usb_clear_halt(serial->dev, command_port->read_urb->pipe); | |
1313 | ||
1314 | command_port->read_urb->dev = serial->dev; | |
1315 | retval = usb_submit_urb(command_port->read_urb, GFP_KERNEL); | |
1316 | if (retval) { | |
1317 | err("%s - failed submitting read urb, error %d", __FUNCTION__, retval); | |
1318 | goto exit; | |
1319 | } | |
1320 | } | |
1321 | command_info->port_running++; | |
1322 | ||
1323 | exit: | |
1324 | spin_unlock_irqrestore(&command_info->lock, flags); | |
1325 | return retval; | |
1326 | } | |
1327 | ||
1328 | ||
1329 | static void stop_command_port(struct usb_serial *serial) | |
1330 | { | |
1331 | struct usb_serial_port *command_port; | |
1332 | struct whiteheat_command_private *command_info; | |
1333 | unsigned long flags; | |
1334 | ||
1335 | command_port = serial->port[COMMAND_PORT]; | |
1336 | command_info = usb_get_serial_port_data(command_port); | |
1337 | spin_lock_irqsave(&command_info->lock, flags); | |
1338 | command_info->port_running--; | |
1339 | if (!command_info->port_running) | |
1340 | usb_kill_urb(command_port->read_urb); | |
1341 | spin_unlock_irqrestore(&command_info->lock, flags); | |
1342 | } | |
1343 | ||
1344 | ||
1345 | static int start_port_read(struct usb_serial_port *port) | |
1346 | { | |
1347 | struct whiteheat_private *info = usb_get_serial_port_data(port); | |
1348 | struct whiteheat_urb_wrap *wrap; | |
1349 | struct urb *urb; | |
1350 | int retval = 0; | |
1351 | unsigned long flags; | |
1352 | struct list_head *tmp; | |
1353 | struct list_head *tmp2; | |
1354 | ||
1355 | spin_lock_irqsave(&info->lock, flags); | |
1356 | ||
1357 | list_for_each_safe(tmp, tmp2, &info->rx_urbs_free) { | |
1358 | list_del(tmp); | |
1359 | wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); | |
1360 | urb = wrap->urb; | |
1361 | urb->dev = port->serial->dev; | |
1362 | retval = usb_submit_urb(urb, GFP_KERNEL); | |
1363 | if (retval) { | |
1364 | list_add(tmp, &info->rx_urbs_free); | |
1365 | list_for_each_safe(tmp, tmp2, &info->rx_urbs_submitted) { | |
1366 | wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); | |
1367 | urb = wrap->urb; | |
1368 | usb_kill_urb(urb); | |
179e0917 | 1369 | list_move(tmp, &info->rx_urbs_free); |
1da177e4 LT |
1370 | } |
1371 | break; | |
1372 | } | |
1373 | list_add(tmp, &info->rx_urbs_submitted); | |
1374 | } | |
1375 | ||
1376 | spin_unlock_irqrestore(&info->lock, flags); | |
1377 | ||
1378 | return retval; | |
1379 | } | |
1380 | ||
1381 | ||
1382 | static struct whiteheat_urb_wrap *urb_to_wrap(struct urb* urb, struct list_head *head) | |
1383 | { | |
1384 | struct whiteheat_urb_wrap *wrap; | |
1385 | struct list_head *tmp; | |
1386 | ||
1387 | list_for_each(tmp, head) { | |
1388 | wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); | |
1389 | if (wrap->urb == urb) | |
1390 | return wrap; | |
1391 | } | |
1392 | ||
1393 | return NULL; | |
1394 | } | |
1395 | ||
1396 | ||
1397 | static struct list_head *list_first(struct list_head *head) | |
1398 | { | |
1399 | return head->next; | |
1400 | } | |
1401 | ||
1402 | ||
1403 | static void rx_data_softint(void *private) | |
1404 | { | |
1405 | struct usb_serial_port *port = (struct usb_serial_port *)private; | |
1406 | struct whiteheat_private *info = usb_get_serial_port_data(port); | |
1407 | struct tty_struct *tty = port->tty; | |
1408 | struct whiteheat_urb_wrap *wrap; | |
1409 | struct urb *urb; | |
1410 | unsigned long flags; | |
1411 | struct list_head *tmp; | |
1412 | struct list_head *tmp2; | |
1413 | int result; | |
1414 | int sent = 0; | |
1415 | ||
1416 | spin_lock_irqsave(&info->lock, flags); | |
1417 | if (info->flags & THROTTLED) { | |
1418 | spin_unlock_irqrestore(&info->lock, flags); | |
1419 | return; | |
1420 | } | |
1421 | ||
1422 | list_for_each_safe(tmp, tmp2, &info->rx_urb_q) { | |
1423 | list_del(tmp); | |
1424 | spin_unlock_irqrestore(&info->lock, flags); | |
1425 | ||
1426 | wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); | |
1427 | urb = wrap->urb; | |
1428 | ||
1429 | if (tty && urb->actual_length) { | |
33f0f88f AC |
1430 | int len = tty_buffer_request_room(tty, urb->actual_length); |
1431 | /* This stuff can go away now I suspect */ | |
1432 | if (unlikely(len < urb->actual_length)) { | |
1da177e4 LT |
1433 | spin_lock_irqsave(&info->lock, flags); |
1434 | list_add(tmp, &info->rx_urb_q); | |
1435 | spin_unlock_irqrestore(&info->lock, flags); | |
1436 | tty_flip_buffer_push(tty); | |
1437 | schedule_work(&info->rx_work); | |
1438 | return; | |
1439 | } | |
33f0f88f AC |
1440 | tty_insert_flip_string(tty, urb->transfer_buffer, len); |
1441 | sent += len; | |
1da177e4 LT |
1442 | } |
1443 | ||
1444 | urb->dev = port->serial->dev; | |
1445 | result = usb_submit_urb(urb, GFP_ATOMIC); | |
1446 | if (result) { | |
1447 | err("%s - failed resubmitting read urb, error %d", __FUNCTION__, result); | |
1448 | spin_lock_irqsave(&info->lock, flags); | |
1449 | list_add(tmp, &info->rx_urbs_free); | |
1450 | continue; | |
1451 | } | |
1452 | ||
1453 | spin_lock_irqsave(&info->lock, flags); | |
1454 | list_add(tmp, &info->rx_urbs_submitted); | |
1455 | } | |
1456 | spin_unlock_irqrestore(&info->lock, flags); | |
1457 | ||
1458 | if (sent) | |
1459 | tty_flip_buffer_push(tty); | |
1460 | } | |
1461 | ||
1462 | ||
1463 | /***************************************************************************** | |
1464 | * Connect Tech's White Heat module functions | |
1465 | *****************************************************************************/ | |
1466 | static int __init whiteheat_init (void) | |
1467 | { | |
1468 | int retval; | |
1469 | retval = usb_serial_register(&whiteheat_fake_device); | |
1470 | if (retval) | |
1471 | goto failed_fake_register; | |
1472 | retval = usb_serial_register(&whiteheat_device); | |
1473 | if (retval) | |
1474 | goto failed_device_register; | |
1475 | retval = usb_register(&whiteheat_driver); | |
1476 | if (retval) | |
1477 | goto failed_usb_register; | |
1478 | info(DRIVER_DESC " " DRIVER_VERSION); | |
1479 | return 0; | |
1480 | failed_usb_register: | |
1481 | usb_serial_deregister(&whiteheat_device); | |
1482 | failed_device_register: | |
1483 | usb_serial_deregister(&whiteheat_fake_device); | |
1484 | failed_fake_register: | |
1485 | return retval; | |
1486 | } | |
1487 | ||
1488 | ||
1489 | static void __exit whiteheat_exit (void) | |
1490 | { | |
1491 | usb_deregister (&whiteheat_driver); | |
1492 | usb_serial_deregister (&whiteheat_fake_device); | |
1493 | usb_serial_deregister (&whiteheat_device); | |
1494 | } | |
1495 | ||
1496 | ||
1497 | module_init(whiteheat_init); | |
1498 | module_exit(whiteheat_exit); | |
1499 | ||
1500 | MODULE_AUTHOR( DRIVER_AUTHOR ); | |
1501 | MODULE_DESCRIPTION( DRIVER_DESC ); | |
1502 | MODULE_LICENSE("GPL"); | |
1503 | ||
1504 | module_param(urb_pool_size, int, 0); | |
1505 | MODULE_PARM_DESC(urb_pool_size, "Number of urbs to use for buffering"); | |
1506 | ||
1507 | module_param(debug, bool, S_IRUGO | S_IWUSR); | |
1508 | MODULE_PARM_DESC(debug, "Debug enabled or not"); |