]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | # |
2 | # Video configuration | |
3 | # | |
4 | ||
5 | menu "Graphics support" | |
e25df120 | 6 | depends on HAS_IOMEM |
1da177e4 | 7 | |
179b025f RD |
8 | source "drivers/char/agp/Kconfig" |
9 | ||
10 | source "drivers/char/drm/Kconfig" | |
ba70710e | 11 | |
b2f594fd AD |
12 | config VGASTATE |
13 | tristate | |
14 | default n | |
15 | ||
23b0f015 LY |
16 | config VIDEO_OUTPUT_CONTROL |
17 | tristate "Lowlevel video output switch controls" | |
23b0f015 LY |
18 | help |
19 | This framework adds support for low-level control of the video | |
20 | output switch. | |
21 | ||
179b025f | 22 | menuconfig FB |
1da177e4 LT |
23 | tristate "Support for frame buffer devices" |
24 | ---help--- | |
25 | The frame buffer device provides an abstraction for the graphics | |
26 | hardware. It represents the frame buffer of some video hardware and | |
27 | allows application software to access the graphics hardware through | |
28 | a well-defined interface, so the software doesn't need to know | |
29 | anything about the low-level (hardware register) stuff. | |
30 | ||
31 | Frame buffer devices work identically across the different | |
32 | architectures supported by Linux and make the implementation of | |
33 | application programs easier and more portable; at this point, an X | |
34 | server exists which uses the frame buffer device exclusively. | |
35 | On several non-X86 architectures, the frame buffer device is the | |
36 | only way to use the graphics hardware. | |
37 | ||
38 | The device is accessed through special device nodes, usually located | |
39 | in the /dev directory, i.e. /dev/fb*. | |
40 | ||
41 | You need an utility program called fbset to make full use of frame | |
42 | buffer devices. Please read <file:Documentation/fb/framebuffer.txt> | |
43 | and the Framebuffer-HOWTO at | |
44 | <http://www.tahallah.demon.co.uk/programming/prog.html> for more | |
45 | information. | |
46 | ||
47 | Say Y here and to the driver for your graphics board below if you | |
48 | are compiling a kernel for a non-x86 architecture. | |
49 | ||
50 | If you are compiling for the x86 architecture, you can say Y if you | |
51 | want to play with it, but it is not essential. Please note that | |
52 | running graphical applications that directly touch the hardware | |
53 | (e.g. an accelerated X server) and that are not frame buffer | |
54 | device-aware may cause unexpected results. If unsure, say N. | |
55 | ||
e0e34ef7 JS |
56 | config FIRMWARE_EDID |
57 | bool "Enable firmware EDID" | |
58 | depends on FB | |
59 | default n | |
60 | ---help--- | |
61 | This enables access to the EDID transferred from the firmware. | |
62 | On the i386, this is from the Video BIOS. Enable this if DDC/I2C | |
63 | transfers do not work for your driver and if you are using | |
64 | nvidiafb, i810fb or savagefb. | |
65 | ||
66 | In general, choosing Y for this option is safe. If you | |
67 | experience extremely long delays while booting before you get | |
68 | something on your display, try setting this to N. Matrox cards in | |
69 | combination with certain motherboards and monitors are known to | |
70 | suffer from this problem. | |
71 | ||
fc5891c8 DM |
72 | config FB_DDC |
73 | tristate | |
e0e34ef7 JS |
74 | depends on FB |
75 | select I2C_ALGOBIT | |
76 | select I2C | |
fc5891c8 DM |
77 | default n |
78 | ||
1da177e4 LT |
79 | config FB_CFB_FILLRECT |
80 | tristate | |
81 | depends on FB | |
82 | default n | |
83 | ---help--- | |
84 | Include the cfb_fillrect function for generic software rectangle | |
85 | filling. This is used by drivers that don't provide their own | |
86 | (accelerated) version. | |
87 | ||
88 | config FB_CFB_COPYAREA | |
89 | tristate | |
90 | depends on FB | |
91 | default n | |
92 | ---help--- | |
93 | Include the cfb_copyarea function for generic software area copying. | |
94 | This is used by drivers that don't provide their own (accelerated) | |
95 | version. | |
96 | ||
97 | config FB_CFB_IMAGEBLIT | |
98 | tristate | |
99 | depends on FB | |
100 | default n | |
101 | ---help--- | |
102 | Include the cfb_imageblit function for generic software image | |
103 | blitting. This is used by drivers that don't provide their own | |
104 | (accelerated) version. | |
105 | ||
779121e9 PP |
106 | config FB_CFB_REV_PIXELS_IN_BYTE |
107 | bool | |
108 | depends on FB | |
109 | default n | |
110 | ---help--- | |
111 | Allow generic frame-buffer functions to work on displays with 1, 2 | |
112 | and 4 bits per pixel depths which has opposite order of pixels in | |
113 | byte order to bytes in long order. | |
114 | ||
68648ed1 AD |
115 | config FB_SYS_FILLRECT |
116 | tristate | |
117 | depends on FB | |
118 | default n | |
119 | ---help--- | |
120 | Include the sys_fillrect function for generic software rectangle | |
121 | filling. This is used by drivers that don't provide their own | |
122 | (accelerated) version and the framebuffer is in system RAM. | |
123 | ||
124 | config FB_SYS_COPYAREA | |
125 | tristate | |
126 | depends on FB | |
127 | default n | |
128 | ---help--- | |
129 | Include the sys_copyarea function for generic software area copying. | |
130 | This is used by drivers that don't provide their own (accelerated) | |
131 | version and the framebuffer is in system RAM. | |
132 | ||
133 | config FB_SYS_IMAGEBLIT | |
134 | tristate | |
135 | depends on FB | |
136 | default n | |
137 | ---help--- | |
138 | Include the sys_imageblit function for generic software image | |
139 | blitting. This is used by drivers that don't provide their own | |
140 | (accelerated) version and the framebuffer is in system RAM. | |
141 | ||
09aaf268 AD |
142 | config FB_SYS_FOPS |
143 | tristate | |
144 | depends on FB | |
145 | default n | |
146 | ||
60b59bea JK |
147 | config FB_DEFERRED_IO |
148 | bool | |
149 | depends on FB | |
150 | default y | |
151 | ||
a268422d OZ |
152 | config FB_SVGALIB |
153 | tristate | |
154 | depends on FB | |
155 | default n | |
156 | ---help--- | |
157 | Common utility functions useful to fbdev drivers of VGA-based | |
158 | cards. | |
159 | ||
1da177e4 LT |
160 | config FB_MACMODES |
161 | tristate | |
162 | depends on FB | |
163 | default n | |
164 | ||
5474c120 | 165 | config FB_BACKLIGHT |
4b755999 MH |
166 | bool |
167 | depends on FB | |
168 | select BACKLIGHT_LCD_SUPPORT | |
169 | select BACKLIGHT_CLASS_DEVICE | |
170 | default n | |
5474c120 | 171 | |
1da177e4 LT |
172 | config FB_MODE_HELPERS |
173 | bool "Enable Video Mode Handling Helpers" | |
174 | depends on FB | |
175 | default n | |
176 | ---help--- | |
177 | This enables functions for handling video modes using the | |
178 | Generalized Timing Formula and the EDID parser. A few drivers rely | |
179 | on this feature such as the radeonfb, rivafb, and the i810fb. If | |
180 | your driver does not take advantage of this feature, choosing Y will | |
181 | just increase the kernel size by about 5K. | |
182 | ||
183 | config FB_TILEBLITTING | |
184 | bool "Enable Tile Blitting Support" | |
185 | depends on FB | |
186 | default n | |
187 | ---help--- | |
188 | This enables tile blitting. Tile blitting is a drawing technique | |
189 | where the screen is divided into rectangular sections (tiles), whereas | |
190 | the standard blitting divides the screen into pixels. Because the | |
191 | default drawing element is a tile, drawing functions will be passed | |
192 | parameters in terms of number of tiles instead of number of pixels. | |
193 | For example, to draw a single character, instead of using bitmaps, | |
194 | an index to an array of bitmaps will be used. To clear or move a | |
195 | rectangular section of a screen, the rectangle will be described in | |
196 | terms of number of tiles in the x- and y-axis. | |
197 | ||
198 | This is particularly important to one driver, matroxfb. If | |
199 | unsure, say N. | |
200 | ||
10ccaf4b | 201 | comment "Frame buffer hardware drivers" |
e0e34ef7 JS |
202 | depends on FB |
203 | ||
1da177e4 LT |
204 | config FB_CIRRUS |
205 | tristate "Cirrus Logic support" | |
206 | depends on FB && (ZORRO || PCI) | |
207 | select FB_CFB_FILLRECT | |
208 | select FB_CFB_COPYAREA | |
209 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
210 | ---help--- |
211 | This enables support for Cirrus Logic GD542x/543x based boards on | |
212 | Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum. | |
213 | ||
214 | If you have a PCI-based system, this enables support for these | |
215 | chips: GD-543x, GD-544x, GD-5480. | |
216 | ||
217 | Please read the file <file:Documentation/fb/cirrusfb.txt>. | |
218 | ||
219 | Say N unless you have such a graphics board or plan to get one | |
220 | before you next recompile the kernel. | |
221 | ||
222 | config FB_PM2 | |
223 | tristate "Permedia2 support" | |
224 | depends on FB && ((AMIGA && BROKEN) || PCI) | |
225 | select FB_CFB_FILLRECT | |
226 | select FB_CFB_COPYAREA | |
227 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
228 | help |
229 | This is the frame buffer device driver for the Permedia2 AGP frame | |
230 | buffer card from ASK, aka `Graphic Blaster Exxtreme'. There is a | |
231 | product page at | |
232 | <http://www.ask.com.hk/product/Permedia%202/permedia2.htm>. | |
233 | ||
234 | config FB_PM2_FIFO_DISCONNECT | |
235 | bool "enable FIFO disconnect feature" | |
236 | depends on FB_PM2 && PCI | |
237 | help | |
238 | Support the Permedia2 FIFO disconnect feature (see CONFIG_FB_PM2). | |
239 | ||
240 | config FB_ARMCLCD | |
241 | tristate "ARM PrimeCell PL110 support" | |
242 | depends on FB && ARM && ARM_AMBA | |
243 | select FB_CFB_FILLRECT | |
244 | select FB_CFB_COPYAREA | |
245 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
246 | help |
247 | This framebuffer device driver is for the ARM PrimeCell PL110 | |
248 | Colour LCD controller. ARM PrimeCells provide the building | |
249 | blocks for System on a Chip devices. | |
250 | ||
251 | If you want to compile this as a module (=code which can be | |
252 | inserted into and removed from the running kernel), say M | |
39f5fb30 | 253 | here and read <file:Documentation/kbuild/modules.txt>. The module |
1da177e4 LT |
254 | will be called amba-clcd. |
255 | ||
903e2bbd MS |
256 | choice |
257 | ||
258 | depends on FB_ARMCLCD && (ARCH_LH7A40X || ARCH_LH7952X) | |
259 | prompt "LCD Panel" | |
260 | default FB_ARMCLCD_SHARP_LQ035Q7DB02 | |
261 | ||
262 | config FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT | |
263 | bool "LogicPD LCD 3.5\" QVGA w/HRTFT IC" | |
264 | help | |
265 | This is an implementation of the Sharp LQ035Q7DB02, a 3.5" | |
cab00891 | 266 | color QVGA, HRTFT panel. The LogicPD device includes |
903e2bbd MS |
267 | an integrated HRTFT controller IC. |
268 | The native resolution is 240x320. | |
269 | ||
270 | config FB_ARMCLCD_SHARP_LQ057Q3DC02 | |
271 | bool "LogicPD LCD 5.7\" QVGA" | |
272 | help | |
273 | This is an implementation of the Sharp LQ057Q3DC02, a 5.7" | |
274 | color QVGA, TFT panel. The LogicPD device includes an | |
275 | The native resolution is 320x240. | |
276 | ||
277 | config FB_ARMCLCD_SHARP_LQ64D343 | |
278 | bool "LogicPD LCD 6.4\" VGA" | |
279 | help | |
280 | This is an implementation of the Sharp LQ64D343, a 6.4" | |
281 | color VGA, TFT panel. The LogicPD device includes an | |
282 | The native resolution is 640x480. | |
283 | ||
284 | config FB_ARMCLCD_SHARP_LQ10D368 | |
285 | bool "LogicPD LCD 10.4\" VGA" | |
286 | help | |
287 | This is an implementation of the Sharp LQ10D368, a 10.4" | |
288 | color VGA, TFT panel. The LogicPD device includes an | |
289 | The native resolution is 640x480. | |
290 | ||
291 | ||
292 | config FB_ARMCLCD_SHARP_LQ121S1DG41 | |
293 | bool "LogicPD LCD 12.1\" SVGA" | |
294 | help | |
295 | This is an implementation of the Sharp LQ121S1DG41, a 12.1" | |
296 | color SVGA, TFT panel. The LogicPD device includes an | |
297 | The native resolution is 800x600. | |
298 | ||
299 | This panel requires a clock rate may be an integer fraction | |
300 | of the base LCDCLK frequency. The driver will select the | |
301 | highest frequency available that is lower than the maximum | |
302 | allowed. The panel may flicker if the clock rate is | |
303 | slower than the recommended minimum. | |
304 | ||
305 | config FB_ARMCLCD_AUO_A070VW01_WIDE | |
306 | bool "AU Optronics A070VW01 LCD 7.0\" WIDE" | |
307 | help | |
308 | This is an implementation of the AU Optronics, a 7.0" | |
309 | WIDE Color. The native resolution is 234x480. | |
310 | ||
311 | config FB_ARMCLCD_HITACHI | |
312 | bool "Hitachi Wide Screen 800x480" | |
313 | help | |
314 | This is an implementation of the Hitachi 800x480. | |
315 | ||
316 | endchoice | |
317 | ||
318 | ||
1da177e4 LT |
319 | config FB_ACORN |
320 | bool "Acorn VIDC support" | |
321 | depends on (FB = y) && ARM && (ARCH_ACORN || ARCH_CLPS7500) | |
322 | select FB_CFB_FILLRECT | |
323 | select FB_CFB_COPYAREA | |
324 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
325 | help |
326 | This is the frame buffer device driver for the Acorn VIDC graphics | |
327 | hardware found in Acorn RISC PCs and other ARM-based machines. If | |
328 | unsure, say N. | |
329 | ||
330 | config FB_CLPS711X | |
331 | bool "CLPS711X LCD support" | |
332 | depends on (FB = y) && ARM && ARCH_CLPS711X | |
333 | select FB_CFB_FILLRECT | |
334 | select FB_CFB_COPYAREA | |
335 | select FB_CFB_IMAGEBLIT | |
e65c0850 RD |
336 | help |
337 | Say Y to enable the Framebuffer driver for the CLPS7111 and | |
338 | EP7212 processors. | |
1da177e4 LT |
339 | |
340 | config FB_SA1100 | |
341 | bool "SA-1100 LCD support" | |
342 | depends on (FB = y) && ARM && ARCH_SA1100 | |
343 | select FB_CFB_FILLRECT | |
344 | select FB_CFB_COPYAREA | |
345 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
346 | help |
347 | This is a framebuffer device for the SA-1100 LCD Controller. | |
348 | See <http://www.linux-fbdev.org/> for information on framebuffer | |
349 | devices. | |
350 | ||
351 | If you plan to use the LCD display with your SA-1100 system, say | |
352 | Y here. | |
353 | ||
7c2f891c SH |
354 | config FB_IMX |
355 | tristate "Motorola i.MX LCD support" | |
356 | depends on FB && ARM && ARCH_IMX | |
357 | select FB_CFB_FILLRECT | |
358 | select FB_CFB_COPYAREA | |
359 | select FB_CFB_IMAGEBLIT | |
7c2f891c | 360 | |
1da177e4 LT |
361 | config FB_CYBER2000 |
362 | tristate "CyberPro 2000/2010/5000 support" | |
363 | depends on FB && PCI && (BROKEN || !SPARC64) | |
364 | select FB_CFB_FILLRECT | |
365 | select FB_CFB_COPYAREA | |
366 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
367 | help |
368 | This enables support for the Integraphics CyberPro 20x0 and 5000 | |
369 | VGA chips used in the Rebel.com Netwinder and other machines. | |
370 | Say Y if you have a NetWinder or a graphics card containing this | |
371 | device, otherwise say N. | |
372 | ||
373 | config FB_APOLLO | |
374 | bool | |
375 | depends on (FB = y) && APOLLO | |
376 | default y | |
377 | select FB_CFB_FILLRECT | |
378 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
379 | |
380 | config FB_Q40 | |
381 | bool | |
382 | depends on (FB = y) && Q40 | |
383 | default y | |
384 | select FB_CFB_FILLRECT | |
385 | select FB_CFB_COPYAREA | |
386 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
387 | |
388 | config FB_AMIGA | |
389 | tristate "Amiga native chipset support" | |
390 | depends on FB && AMIGA | |
1da177e4 LT |
391 | help |
392 | This is the frame buffer device driver for the builtin graphics | |
393 | chipset found in Amigas. | |
394 | ||
395 | To compile this driver as a module, choose M here: the | |
396 | module will be called amifb. | |
397 | ||
398 | config FB_AMIGA_OCS | |
399 | bool "Amiga OCS chipset support" | |
400 | depends on FB_AMIGA | |
401 | help | |
402 | This enables support for the original Agnus and Denise video chips, | |
403 | found in the Amiga 1000 and most A500's and A2000's. If you intend | |
404 | to run Linux on any of these systems, say Y; otherwise say N. | |
405 | ||
406 | config FB_AMIGA_ECS | |
407 | bool "Amiga ECS chipset support" | |
408 | depends on FB_AMIGA | |
409 | help | |
410 | This enables support for the Enhanced Chip Set, found in later | |
411 | A500's, later A2000's, the A600, the A3000, the A3000T and CDTV. If | |
412 | you intend to run Linux on any of these systems, say Y; otherwise | |
413 | say N. | |
414 | ||
415 | config FB_AMIGA_AGA | |
416 | bool "Amiga AGA chipset support" | |
417 | depends on FB_AMIGA | |
418 | help | |
419 | This enables support for the Advanced Graphics Architecture (also | |
420 | known as the AGA or AA) Chip Set, found in the A1200, A4000, A4000T | |
421 | and CD32. If you intend to run Linux on any of these systems, say Y; | |
422 | otherwise say N. | |
423 | ||
1da177e4 LT |
424 | config FB_FM2 |
425 | bool "Amiga FrameMaster II/Rainbow II support" | |
426 | depends on (FB = y) && ZORRO | |
427 | select FB_CFB_FILLRECT | |
428 | select FB_CFB_COPYAREA | |
429 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
430 | help |
431 | This is the frame buffer device driver for the Amiga FrameMaster | |
432 | card from BSC (exhibited 1992 but not shipped as a CBM product). | |
433 | ||
1154ea7d JK |
434 | config FB_ARC |
435 | tristate "Arc Monochrome LCD board support" | |
436 | depends on FB && X86 | |
922e6f9a AD |
437 | select FB_SYS_FILLRECT |
438 | select FB_SYS_COPYAREA | |
439 | select FB_SYS_IMAGEBLIT | |
d9a05f18 | 440 | select FB_SYS_FOPS |
1154ea7d JK |
441 | help |
442 | This enables support for the Arc Monochrome LCD board. The board | |
443 | is based on the KS-108 lcd controller and is typically a matrix | |
444 | of 2*n chips. This driver was tested with a 128x64 panel. This | |
445 | driver supports it for use with x86 SBCs through a 16 bit GPIO | |
09509603 | 446 | interface (8 bit data, 8 bit control). If you anticipate using |
1154ea7d JK |
447 | this driver, say Y or M; otherwise say N. You must specify the |
448 | GPIO IO address to be used for setting control and data. | |
449 | ||
1da177e4 LT |
450 | config FB_ATARI |
451 | bool "Atari native chipset support" | |
a1005012 MS |
452 | depends on (FB = y) && ATARI |
453 | select FB_CFB_FILLRECT | |
454 | select FB_CFB_COPYAREA | |
455 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
456 | help |
457 | This is the frame buffer device driver for the builtin graphics | |
458 | chipset found in Ataris. | |
459 | ||
460 | config FB_OF | |
461 | bool "Open Firmware frame buffer device support" | |
bed59275 | 462 | depends on (FB = y) && (PPC64 || PPC_OF) && (!PPC_PSERIES || PCI) |
1da177e4 LT |
463 | select FB_CFB_FILLRECT |
464 | select FB_CFB_COPYAREA | |
465 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
466 | select FB_MACMODES |
467 | help | |
468 | Say Y if you want support with Open Firmware for your graphics | |
469 | board. | |
470 | ||
471 | config FB_CONTROL | |
472 | bool "Apple \"control\" display support" | |
a04b61d3 | 473 | depends on (FB = y) && PPC_PMAC && PPC32 |
1da177e4 LT |
474 | select FB_CFB_FILLRECT |
475 | select FB_CFB_COPYAREA | |
476 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
477 | select FB_MACMODES |
478 | help | |
479 | This driver supports a frame buffer for the graphics adapter in the | |
480 | Power Macintosh 7300 and others. | |
481 | ||
482 | config FB_PLATINUM | |
483 | bool "Apple \"platinum\" display support" | |
a04b61d3 | 484 | depends on (FB = y) && PPC_PMAC && PPC32 |
1da177e4 LT |
485 | select FB_CFB_FILLRECT |
486 | select FB_CFB_COPYAREA | |
487 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
488 | select FB_MACMODES |
489 | help | |
490 | This driver supports a frame buffer for the "platinum" graphics | |
491 | adapter in some Power Macintoshes. | |
492 | ||
493 | config FB_VALKYRIE | |
494 | bool "Apple \"valkyrie\" display support" | |
a04b61d3 | 495 | depends on (FB = y) && (MAC || (PPC_PMAC && PPC32)) |
1da177e4 LT |
496 | select FB_CFB_FILLRECT |
497 | select FB_CFB_COPYAREA | |
498 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
499 | select FB_MACMODES |
500 | help | |
501 | This driver supports a frame buffer for the "valkyrie" graphics | |
502 | adapter in some Power Macintoshes. | |
503 | ||
504 | config FB_CT65550 | |
505 | bool "Chips 65550 display support" | |
0f8c0234 | 506 | depends on (FB = y) && PPC32 && PCI |
1da177e4 LT |
507 | select FB_CFB_FILLRECT |
508 | select FB_CFB_COPYAREA | |
509 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
510 | help |
511 | This is the frame buffer device driver for the Chips & Technologies | |
512 | 65550 graphics chip in PowerBooks. | |
513 | ||
514 | config FB_ASILIANT | |
e65c0850 | 515 | bool "Asiliant (Chips) 69000 display support" |
1da177e4 LT |
516 | depends on (FB = y) && PCI |
517 | select FB_CFB_FILLRECT | |
518 | select FB_CFB_COPYAREA | |
519 | select FB_CFB_IMAGEBLIT | |
4de0b1ee AD |
520 | help |
521 | This is the frame buffer device driver for the Asiliant 69030 chipset | |
1da177e4 LT |
522 | |
523 | config FB_IMSTT | |
524 | bool "IMS Twin Turbo display support" | |
525 | depends on (FB = y) && PCI | |
526 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
527 | select FB_MACMODES if PPC |
528 | help | |
529 | The IMS Twin Turbo is a PCI-based frame buffer card bundled with | |
530 | many Macintosh and compatible computers. | |
531 | ||
1da177e4 LT |
532 | config FB_VGA16 |
533 | tristate "VGA 16-color graphics support" | |
534 | depends on FB && (X86 || PPC) | |
535 | select FB_CFB_FILLRECT | |
536 | select FB_CFB_COPYAREA | |
537 | select FB_CFB_IMAGEBLIT | |
b2f594fd | 538 | select VGASTATE |
d60d2d8a | 539 | select FONT_8x16 if FRAMEBUFFER_CONSOLE |
1da177e4 LT |
540 | help |
541 | This is the frame buffer device driver for VGA 16 color graphic | |
542 | cards. Say Y if you have such a card. | |
543 | ||
544 | To compile this driver as a module, choose M here: the | |
545 | module will be called vga16fb. | |
546 | ||
e9fa7c43 MH |
547 | config FB_BF54X_LQ043 |
548 | tristate "SHARP LQ043 TFT LCD (BF548 EZKIT)" | |
549 | depends on FB && (BF54x) | |
550 | select FB_CFB_FILLRECT | |
551 | select FB_CFB_COPYAREA | |
552 | select FB_CFB_IMAGEBLIT | |
553 | help | |
554 | This is the framebuffer device driver for a SHARP LQ043T1DG01 TFT LCD | |
555 | ||
1da177e4 LT |
556 | config FB_STI |
557 | tristate "HP STI frame buffer device support" | |
558 | depends on FB && PARISC | |
559 | select FB_CFB_FILLRECT | |
560 | select FB_CFB_COPYAREA | |
561 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
562 | default y |
563 | ---help--- | |
564 | STI refers to the HP "Standard Text Interface" which is a set of | |
565 | BIOS routines contained in a ROM chip in HP PA-RISC based machines. | |
566 | Enabling this option will implement the linux framebuffer device | |
567 | using calls to the STI BIOS routines for initialisation. | |
568 | ||
569 | If you enable this option, you will get a planar framebuffer device | |
570 | /dev/fb which will work on the most common HP graphic cards of the | |
571 | NGLE family, including the artist chips (in the 7xx and Bxxx series), | |
572 | HCRX, HCRX24, CRX, CRX24 and VisEG series. | |
573 | ||
574 | It is safe to enable this option, so you should probably say "Y". | |
575 | ||
576 | config FB_MAC | |
577 | bool "Generic Macintosh display support" | |
578 | depends on (FB = y) && MAC | |
579 | select FB_CFB_FILLRECT | |
580 | select FB_CFB_COPYAREA | |
581 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
582 | select FB_MACMODES |
583 | ||
584 | # bool ' Apple DAFB display support' CONFIG_FB_DAFB | |
585 | config FB_HP300 | |
586 | bool | |
587 | depends on (FB = y) && HP300 | |
588 | select FB_CFB_FILLRECT | |
589 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
590 | default y |
591 | ||
592 | config FB_TGA | |
86c6f7d0 MR |
593 | tristate "TGA/SFB+ framebuffer support" |
594 | depends on FB && (ALPHA || TC) | |
1da177e4 LT |
595 | select FB_CFB_FILLRECT |
596 | select FB_CFB_COPYAREA | |
597 | select FB_CFB_IMAGEBLIT | |
1c667682 | 598 | select BITREVERSE |
86c6f7d0 MR |
599 | ---help--- |
600 | This is the frame buffer device driver for generic TGA and SFB+ | |
601 | graphic cards. These include DEC ZLXp-E1, -E2 and -E3 PCI cards, | |
602 | also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3 | |
603 | TURBOchannel cards, also known as PMAGD-A, -B and -C. | |
604 | ||
605 | Due to hardware limitations ZLX-E2 and E3 cards are not supported | |
606 | for DECstation 5000/200 systems. Additionally due to firmware | |
607 | limitations these cards may cause troubles with booting DECstation | |
608 | 5000/240 and /260 systems, but are fully supported under Linux if | |
609 | you manage to get it going. ;-) | |
610 | ||
611 | Say Y if you have one of those. | |
1da177e4 | 612 | |
8bdb3a2d MJ |
613 | config FB_UVESA |
614 | tristate "Userspace VESA VGA graphics support" | |
615 | depends on FB && CONNECTOR | |
616 | select FB_CFB_FILLRECT | |
617 | select FB_CFB_COPYAREA | |
618 | select FB_CFB_IMAGEBLIT | |
619 | select FB_MODE_HELPERS | |
620 | help | |
621 | This is the frame buffer driver for generic VBE 2.0 compliant | |
622 | graphic cards. It can also take advantage of VBE 3.0 features, | |
623 | such as refresh rate adjustment. | |
624 | ||
625 | This driver generally provides more features than vesafb but | |
626 | requires a userspace helper application called 'v86d'. See | |
627 | <file:Documentation/fb/uvesafb.txt> for more information. | |
628 | ||
629 | If unsure, say N. | |
630 | ||
1da177e4 LT |
631 | config FB_VESA |
632 | bool "VESA VGA graphics support" | |
0d078f6f | 633 | depends on (FB = y) && X86 |
1da177e4 LT |
634 | select FB_CFB_FILLRECT |
635 | select FB_CFB_COPYAREA | |
636 | select FB_CFB_IMAGEBLIT | |
c9b2ec4d | 637 | select VIDEO_SELECT |
1da177e4 LT |
638 | help |
639 | This is the frame buffer device driver for generic VESA 2.0 | |
640 | compliant graphic cards. The older VESA 1.2 cards are not supported. | |
641 | You will get a boot time penguin logo at no additional cost. Please | |
642 | read <file:Documentation/fb/vesafb.txt>. If unsure, say Y. | |
643 | ||
7c83172b HY |
644 | config FB_EFI |
645 | bool "EFI-based Framebuffer Support" | |
646 | depends on (FB = y) && X86 | |
647 | select FB_CFB_FILLRECT | |
648 | select FB_CFB_COPYAREA | |
649 | select FB_CFB_IMAGEBLIT | |
650 | help | |
651 | This is the EFI frame buffer device driver. If the firmware on | |
652 | your platform is UEFI2.0, select Y to add support for | |
653 | Graphics Output Protocol for early console messages to appear. | |
654 | ||
90b4f9ac EH |
655 | config FB_IMAC |
656 | bool "Intel-based Macintosh Framebuffer Support" | |
b64ef8af | 657 | depends on (FB = y) && X86 && EFI |
90b4f9ac EH |
658 | select FB_CFB_FILLRECT |
659 | select FB_CFB_COPYAREA | |
660 | select FB_CFB_IMAGEBLIT | |
661 | help | |
662 | This is the frame buffer device driver for the Intel-based Macintosh | |
663 | ||
aad09e51 JK |
664 | config FB_HECUBA |
665 | tristate "Hecuba board support" | |
666 | depends on FB && X86 && MMU | |
d6774935 AD |
667 | select FB_SYS_FILLRECT |
668 | select FB_SYS_COPYAREA | |
669 | select FB_SYS_IMAGEBLIT | |
28d4564b | 670 | select FB_SYS_FOPS |
aad09e51 JK |
671 | select FB_DEFERRED_IO |
672 | help | |
673 | This enables support for the Hecuba board. This driver was tested | |
674 | with an E-Ink 800x600 display and x86 SBCs through a 16 bit GPIO | |
01dd2fbf | 675 | interface (8 bit data, 4 bit control). If you anticipate using |
aad09e51 JK |
676 | this driver, say Y or M; otherwise say N. You must specify the |
677 | GPIO IO address to be used for setting control and data. | |
678 | ||
1da177e4 LT |
679 | config FB_HGA |
680 | tristate "Hercules mono graphics support" | |
681 | depends on FB && X86 | |
682 | select FB_CFB_FILLRECT | |
683 | select FB_CFB_COPYAREA | |
684 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
685 | help |
686 | Say Y here if you have a Hercules mono graphics card. | |
687 | ||
688 | To compile this driver as a module, choose M here: the | |
689 | module will be called hgafb. | |
690 | ||
691 | As this card technology is 15 years old, most people will answer N | |
692 | here. | |
693 | ||
694 | config FB_HGA_ACCEL | |
695 | bool "Hercules mono Acceleration functions (EXPERIMENTAL)" | |
696 | depends on FB_HGA && EXPERIMENTAL | |
697 | ---help--- | |
698 | This will compile the Hercules mono graphics with | |
699 | acceleration functions. | |
700 | ||
1da177e4 LT |
701 | config FB_SGIVW |
702 | tristate "SGI Visual Workstation framebuffer support" | |
703 | depends on FB && X86_VISWS | |
704 | select FB_CFB_FILLRECT | |
705 | select FB_CFB_COPYAREA | |
706 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
707 | help |
708 | SGI Visual Workstation support for framebuffer graphics. | |
709 | ||
710 | config FB_GBE | |
711 | bool "SGI Graphics Backend frame buffer support" | |
712 | depends on (FB = y) && (SGI_IP32 || X86_VISWS) | |
713 | select FB_CFB_FILLRECT | |
714 | select FB_CFB_COPYAREA | |
715 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
716 | help |
717 | This is the frame buffer device driver for SGI Graphics Backend. | |
718 | This chip is used in SGI O2 and Visual Workstation 320/540. | |
719 | ||
720 | config FB_GBE_MEM | |
721 | int "Video memory size in MB" | |
722 | depends on FB_GBE | |
80c410dc | 723 | default 4 |
1da177e4 LT |
724 | help |
725 | This is the amount of memory reserved for the framebuffer, | |
726 | which can be any value between 1MB and 8MB. | |
727 | ||
1a571986 MF |
728 | config FB_SBUS |
729 | bool "SBUS and UPA framebuffers" | |
0b57ee9e | 730 | depends on (FB = y) && SPARC |
1a571986 MF |
731 | help |
732 | Say Y if you want support for SBUS or UPA based frame buffer device. | |
733 | ||
1da177e4 LT |
734 | config FB_BW2 |
735 | bool "BWtwo support" | |
e019630e | 736 | depends on (FB = y) && (SPARC && FB_SBUS) |
1da177e4 LT |
737 | select FB_CFB_FILLRECT |
738 | select FB_CFB_COPYAREA | |
739 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
740 | help |
741 | This is the frame buffer device driver for the BWtwo frame buffer. | |
742 | ||
743 | config FB_CG3 | |
744 | bool "CGthree support" | |
e019630e | 745 | depends on (FB = y) && (SPARC && FB_SBUS) |
1a571986 | 746 | select FB_CFB_FILLRECT |
1da177e4 LT |
747 | select FB_CFB_COPYAREA |
748 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
749 | help |
750 | This is the frame buffer device driver for the CGthree frame buffer. | |
751 | ||
752 | config FB_CG6 | |
753 | bool "CGsix (GX,TurboGX) support" | |
e019630e | 754 | depends on (FB = y) && (SPARC && FB_SBUS) |
1da177e4 LT |
755 | select FB_CFB_COPYAREA |
756 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
757 | help |
758 | This is the frame buffer device driver for the CGsix (GX, TurboGX) | |
759 | frame buffer. | |
760 | ||
8d74c1fd KH |
761 | config FB_FFB |
762 | bool "Creator/Creator3D/Elite3D support" | |
763 | depends on FB_SBUS && SPARC64 | |
764 | select FB_CFB_COPYAREA | |
765 | select FB_CFB_IMAGEBLIT | |
766 | help | |
767 | This is the frame buffer device driver for the Creator, Creator3D, | |
768 | and Elite3D graphics boards. | |
769 | ||
770 | config FB_TCX | |
771 | bool "TCX (SS4/SS5 only) support" | |
772 | depends on FB_SBUS | |
773 | select FB_CFB_FILLRECT | |
774 | select FB_CFB_COPYAREA | |
775 | select FB_CFB_IMAGEBLIT | |
776 | help | |
777 | This is the frame buffer device driver for the TCX 24/8bit frame | |
778 | buffer. | |
779 | ||
780 | config FB_CG14 | |
781 | bool "CGfourteen (SX) support" | |
782 | depends on FB_SBUS | |
783 | select FB_CFB_FILLRECT | |
784 | select FB_CFB_COPYAREA | |
785 | select FB_CFB_IMAGEBLIT | |
786 | help | |
787 | This is the frame buffer device driver for the CGfourteen frame | |
788 | buffer on Desktop SPARCsystems with the SX graphics option. | |
789 | ||
790 | config FB_P9100 | |
791 | bool "P9100 (Sparcbook 3 only) support" | |
792 | depends on FB_SBUS | |
793 | select FB_CFB_FILLRECT | |
794 | select FB_CFB_COPYAREA | |
795 | select FB_CFB_IMAGEBLIT | |
796 | help | |
797 | This is the frame buffer device driver for the P9100 card | |
798 | supported on Sparcbook 3 machines. | |
799 | ||
800 | config FB_LEO | |
801 | bool "Leo (ZX) support" | |
802 | depends on FB_SBUS | |
803 | select FB_CFB_FILLRECT | |
804 | select FB_CFB_COPYAREA | |
805 | select FB_CFB_IMAGEBLIT | |
806 | help | |
807 | This is the frame buffer device driver for the SBUS-based Sun ZX | |
808 | (leo) frame buffer cards. | |
809 | ||
810 | config FB_IGA | |
811 | bool "IGA 168x display support" | |
e11a6c23 | 812 | depends on (FB = y) && SPARC32 |
8d74c1fd KH |
813 | select FB_CFB_FILLRECT |
814 | select FB_CFB_COPYAREA | |
815 | select FB_CFB_IMAGEBLIT | |
816 | help | |
817 | This is the framebuffer device for the INTERGRAPHICS 1680 and | |
818 | successor frame buffer cards. | |
819 | ||
820 | config FB_XVR500 | |
821 | bool "Sun XVR-500 3DLABS Wildcat support" | |
e11a6c23 | 822 | depends on (FB = y) && PCI && SPARC64 |
8d74c1fd KH |
823 | select FB_CFB_FILLRECT |
824 | select FB_CFB_COPYAREA | |
825 | select FB_CFB_IMAGEBLIT | |
826 | help | |
827 | This is the framebuffer device for the Sun XVR-500 and similar | |
828 | graphics cards based upon the 3DLABS Wildcat chipset. The driver | |
01dd2fbf | 829 | only works on sparc64 systems where the system firmware has |
8d74c1fd KH |
830 | mostly initialized the card already. It is treated as a |
831 | completely dumb framebuffer device. | |
832 | ||
833 | config FB_XVR2500 | |
834 | bool "Sun XVR-2500 3DLABS Wildcat support" | |
e11a6c23 | 835 | depends on (FB = y) && PCI && SPARC64 |
8d74c1fd KH |
836 | select FB_CFB_FILLRECT |
837 | select FB_CFB_COPYAREA | |
838 | select FB_CFB_IMAGEBLIT | |
839 | help | |
840 | This is the framebuffer device for the Sun XVR-2500 and similar | |
841 | graphics cards based upon the 3DLABS Wildcat chipset. The driver | |
01dd2fbf | 842 | only works on sparc64 systems where the system firmware has |
8d74c1fd KH |
843 | mostly initialized the card already. It is treated as a |
844 | completely dumb framebuffer device. | |
845 | ||
1da177e4 LT |
846 | config FB_PVR2 |
847 | tristate "NEC PowerVR 2 display support" | |
848 | depends on FB && SH_DREAMCAST | |
849 | select FB_CFB_FILLRECT | |
850 | select FB_CFB_COPYAREA | |
851 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
852 | ---help--- |
853 | Say Y here if you have a PowerVR 2 card in your box. If you plan to | |
854 | run linux on your Dreamcast, you will have to say Y here. | |
855 | This driver may or may not work on other PowerVR 2 cards, but is | |
856 | totally untested. Use at your own risk. If unsure, say N. | |
857 | ||
858 | To compile this driver as a module, choose M here: the | |
859 | module will be called pvr2fb. | |
860 | ||
861 | You can pass several parameters to the driver at boot time or at | |
862 | module load time. The parameters look like "video=pvr2:XXX", where | |
863 | the meaning of XXX can be found at the end of the main source file | |
864 | (<file:drivers/video/pvr2fb.c>). Please see the file | |
865 | <file:Documentation/fb/pvr2fb.txt>. | |
866 | ||
867 | config FB_EPSON1355 | |
868 | bool "Epson 1355 framebuffer support" | |
1a3f2881 | 869 | depends on (FB = y) && ARCH_CEIVA |
1da177e4 LT |
870 | select FB_CFB_FILLRECT |
871 | select FB_CFB_COPYAREA | |
872 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
873 | help |
874 | Build in support for the SED1355 Epson Research Embedded RAMDAC | |
875 | LCD/CRT Controller (since redesignated as the S1D13505) as a | |
876 | framebuffer. Product specs at | |
877 | <http://www.erd.epson.com/vdc/html/products.htm>. | |
878 | ||
ecc41d5e RD |
879 | config FB_S1D13XXX |
880 | tristate "Epson S1D13XXX framebuffer support" | |
881 | depends on FB | |
882 | select FB_CFB_FILLRECT | |
883 | select FB_CFB_COPYAREA | |
884 | select FB_CFB_IMAGEBLIT | |
ecc41d5e RD |
885 | help |
886 | Support for S1D13XXX framebuffer device family (currently only | |
887 | working with S1D13806). Product specs at | |
888 | <http://www.erd.epson.com/vdc/html/legacy_13xxx.htm> | |
889 | ||
14340586 NF |
890 | config FB_ATMEL |
891 | tristate "AT91/AT32 LCD Controller support" | |
2b3b3516 | 892 | depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || AVR32) |
14340586 NF |
893 | select FB_CFB_FILLRECT |
894 | select FB_CFB_COPYAREA | |
895 | select FB_CFB_IMAGEBLIT | |
896 | help | |
897 | This enables support for the AT91/AT32 LCD Controller. | |
898 | ||
899 | config FB_INTSRAM | |
900 | bool "Frame Buffer in internal SRAM" | |
901 | depends on FB_ATMEL && ARCH_AT91SAM9261 | |
902 | help | |
903 | Say Y if you want to map Frame Buffer in internal SRAM. Say N if you want | |
904 | to let frame buffer in external SDRAM. | |
905 | ||
250a269d NF |
906 | config FB_ATMEL_STN |
907 | bool "Use a STN display with AT91/AT32 LCD Controller" | |
908 | depends on FB_ATMEL && MACH_AT91SAM9261EK | |
909 | default n | |
910 | help | |
911 | Say Y if you want to connect a STN LCD display to the AT91/AT32 LCD | |
912 | Controller. Say N if you want to connect a TFT. | |
913 | ||
914 | If unsure, say N. | |
915 | ||
1da177e4 LT |
916 | config FB_NVIDIA |
917 | tristate "nVidia Framebuffer Support" | |
918 | depends on FB && PCI | |
e0e34ef7 | 919 | select FB_BACKLIGHT if FB_NVIDIA_BACKLIGHT |
1da177e4 LT |
920 | select FB_MODE_HELPERS |
921 | select FB_CFB_FILLRECT | |
922 | select FB_CFB_COPYAREA | |
923 | select FB_CFB_IMAGEBLIT | |
1c667682 | 924 | select BITREVERSE |
b2f594fd | 925 | select VGASTATE |
1da177e4 LT |
926 | help |
927 | This driver supports graphics boards with the nVidia chips, TNT | |
928 | and newer. For very old chipsets, such as the RIVA128, then use | |
929 | the rivafb. | |
930 | Say Y if you have such a graphics board. | |
931 | ||
932 | To compile this driver as a module, choose M here: the | |
933 | module will be called nvidiafb. | |
934 | ||
935 | config FB_NVIDIA_I2C | |
936 | bool "Enable DDC Support" | |
85f1503a | 937 | depends on FB_NVIDIA |
166f60dd | 938 | select FB_DDC |
1da177e4 LT |
939 | help |
940 | This enables I2C support for nVidia Chipsets. This is used | |
941 | only for getting EDID information from the attached display | |
942 | allowing for robust video mode handling and switching. | |
943 | ||
944 | Because fbdev-2.6 requires that drivers must be able to | |
945 | independently validate video mode parameters, you should say Y | |
946 | here. | |
947 | ||
647f2e7a JD |
948 | config FB_NVIDIA_DEBUG |
949 | bool "Lots of debug output" | |
950 | depends on FB_NVIDIA | |
951 | default n | |
952 | help | |
953 | Say Y here if you want the nVidia driver to output all sorts | |
954 | of debugging information to provide to the maintainer when | |
955 | something goes wrong. | |
956 | ||
5474c120 MH |
957 | config FB_NVIDIA_BACKLIGHT |
958 | bool "Support for backlight control" | |
e0e34ef7 | 959 | depends on FB_NVIDIA |
5474c120 MH |
960 | default y |
961 | help | |
962 | Say Y here if you want to control the backlight of your display. | |
963 | ||
1da177e4 LT |
964 | config FB_RIVA |
965 | tristate "nVidia Riva support" | |
966 | depends on FB && PCI | |
e0e34ef7 | 967 | select FB_BACKLIGHT if FB_RIVA_BACKLIGHT |
1da177e4 LT |
968 | select FB_MODE_HELPERS |
969 | select FB_CFB_FILLRECT | |
970 | select FB_CFB_COPYAREA | |
971 | select FB_CFB_IMAGEBLIT | |
1c667682 | 972 | select BITREVERSE |
b2f594fd | 973 | select VGASTATE |
1da177e4 LT |
974 | help |
975 | This driver supports graphics boards with the nVidia Riva/Geforce | |
976 | chips. | |
977 | Say Y if you have such a graphics board. | |
978 | ||
979 | To compile this driver as a module, choose M here: the | |
980 | module will be called rivafb. | |
981 | ||
982 | config FB_RIVA_I2C | |
983 | bool "Enable DDC Support" | |
984 | depends on FB_RIVA | |
166f60dd | 985 | select FB_DDC |
1da177e4 LT |
986 | help |
987 | This enables I2C support for nVidia Chipsets. This is used | |
988 | only for getting EDID information from the attached display | |
989 | allowing for robust video mode handling and switching. | |
990 | ||
991 | Because fbdev-2.6 requires that drivers must be able to | |
992 | independently validate video mode parameters, you should say Y | |
993 | here. | |
994 | ||
995 | config FB_RIVA_DEBUG | |
647f2e7a | 996 | bool "Lots of debug output" |
1da177e4 LT |
997 | depends on FB_RIVA |
998 | default n | |
999 | help | |
1000 | Say Y here if you want the Riva driver to output all sorts | |
09509603 | 1001 | of debugging information to provide to the maintainer when |
1da177e4 LT |
1002 | something goes wrong. |
1003 | ||
5474c120 MH |
1004 | config FB_RIVA_BACKLIGHT |
1005 | bool "Support for backlight control" | |
e0e34ef7 | 1006 | depends on FB_RIVA |
5474c120 MH |
1007 | default y |
1008 | help | |
1009 | Say Y here if you want to control the backlight of your display. | |
1010 | ||
1da177e4 LT |
1011 | config FB_I810 |
1012 | tristate "Intel 810/815 support (EXPERIMENTAL)" | |
0d078f6f | 1013 | depends on FB && EXPERIMENTAL && PCI && X86_32 |
1da177e4 LT |
1014 | select AGP |
1015 | select AGP_INTEL | |
1016 | select FB_MODE_HELPERS | |
1017 | select FB_CFB_FILLRECT | |
1018 | select FB_CFB_COPYAREA | |
1019 | select FB_CFB_IMAGEBLIT | |
b2f594fd | 1020 | select VGASTATE |
1da177e4 LT |
1021 | help |
1022 | This driver supports the on-board graphics built in to the Intel 810 | |
1023 | and 815 chipsets. Say Y if you have and plan to use such a board. | |
1024 | ||
1025 | To compile this driver as a module, choose M here: the | |
1026 | module will be called i810fb. | |
1027 | ||
1028 | For more information, please read | |
1029 | <file:Documentation/fb/intel810.txt> | |
1030 | ||
1031 | config FB_I810_GTF | |
1032 | bool "use VESA Generalized Timing Formula" | |
1033 | depends on FB_I810 | |
1034 | help | |
1035 | If you say Y, then the VESA standard, Generalized Timing Formula | |
1036 | or GTF, will be used to calculate the required video timing values | |
1037 | per video mode. Since the GTF allows nondiscrete timings | |
1038 | (nondiscrete being a range of values as opposed to discrete being a | |
1039 | set of values), you'll be able to use any combination of horizontal | |
1040 | and vertical resolutions, and vertical refresh rates without having | |
1041 | to specify your own timing parameters. This is especially useful | |
1042 | to maximize the performance of an aging display, or if you just | |
1043 | have a display with nonstandard dimensions. A VESA compliant | |
1044 | monitor is recommended, but can still work with non-compliant ones. | |
1045 | If you need or want this, then select this option. The timings may | |
1046 | not be compliant with Intel's recommended values. Use at your own | |
1047 | risk. | |
1048 | ||
1049 | If you say N, the driver will revert to discrete video timings | |
1050 | using a set recommended by Intel in their documentation. | |
1051 | ||
1052 | If unsure, say N. | |
1053 | ||
74f6ae84 AD |
1054 | config FB_I810_I2C |
1055 | bool "Enable DDC Support" | |
db84502b | 1056 | depends on FB_I810 && FB_I810_GTF |
e80987f8 | 1057 | select FB_DDC |
74f6ae84 AD |
1058 | help |
1059 | ||
dbe7e429 AH |
1060 | config FB_LE80578 |
1061 | tristate "Intel LE80578 (Vermilion) support" | |
1062 | depends on FB && PCI && X86 | |
1063 | select FB_MODE_HELPERS | |
1064 | select FB_CFB_FILLRECT | |
1065 | select FB_CFB_COPYAREA | |
1066 | select FB_CFB_IMAGEBLIT | |
1067 | help | |
1068 | This driver supports the LE80578 (Vermilion Range) chipset | |
1069 | ||
1070 | config FB_CARILLO_RANCH | |
1071 | tristate "Intel Carillo Ranch support" | |
1072 | depends on FB_LE80578 && FB && PCI && X86 | |
1073 | help | |
1074 | This driver supports the LE80578 (Carillo Ranch) board | |
1075 | ||
1da177e4 | 1076 | config FB_INTEL |
d463d34e | 1077 | tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G support (EXPERIMENTAL)" |
0c187add | 1078 | depends on FB && EXPERIMENTAL && PCI && X86 |
1da177e4 LT |
1079 | select AGP |
1080 | select AGP_INTEL | |
1081 | select FB_MODE_HELPERS | |
1082 | select FB_CFB_FILLRECT | |
1083 | select FB_CFB_COPYAREA | |
1084 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1085 | help |
1086 | This driver supports the on-board graphics built in to the Intel | |
d463d34e | 1087 | 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets. |
1da177e4 LT |
1088 | Say Y if you have and plan to use such a board. |
1089 | ||
1f6e8449 DM |
1090 | If you say Y here and want DDC/I2C support you must first say Y to |
1091 | "I2C support" and "I2C bit-banging support" in the character devices | |
1092 | section. | |
1093 | ||
1094 | If you say M here then "I2C support" and "I2C bit-banging support" | |
1095 | can be build either as modules or built-in. | |
1096 | ||
1097 | To compile this driver as a module, choose M here: the | |
1da177e4 LT |
1098 | module will be called intelfb. |
1099 | ||
d463d34e CM |
1100 | For more information, please read <file:Documentation/fb/intelfb.txt> |
1101 | ||
1da177e4 | 1102 | config FB_INTEL_DEBUG |
1f6e8449 | 1103 | bool "Intel driver Debug Messages" |
1da177e4 LT |
1104 | depends on FB_INTEL |
1105 | ---help--- | |
1106 | Say Y here if you want the Intel driver to output all sorts | |
09509603 | 1107 | of debugging information to provide to the maintainer when |
1da177e4 LT |
1108 | something goes wrong. |
1109 | ||
1f6e8449 DM |
1110 | config FB_INTEL_I2C |
1111 | bool "DDC/I2C for Intel framebuffer support" | |
1112 | depends on FB_INTEL | |
166f60dd | 1113 | select FB_DDC |
1f6e8449 DM |
1114 | default y |
1115 | help | |
1116 | Say Y here if you want DDC/I2C support for your on-board Intel graphics. | |
1117 | ||
1da177e4 LT |
1118 | config FB_MATROX |
1119 | tristate "Matrox acceleration" | |
1120 | depends on FB && PCI | |
1121 | select FB_CFB_FILLRECT | |
1122 | select FB_CFB_COPYAREA | |
1123 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1124 | select FB_TILEBLITTING |
1125 | select FB_MACMODES if PPC_PMAC | |
1126 | ---help--- | |
1127 | Say Y here if you have a Matrox Millennium, Matrox Millennium II, | |
1128 | Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox | |
1129 | Mystique G200, Matrox Millennium G200, Matrox Marvel G200 video, | |
1130 | Matrox G400, G450 or G550 card in your box. | |
1131 | ||
1132 | To compile this driver as a module, choose M here: the | |
1133 | module will be called matroxfb. | |
1134 | ||
1135 | You can pass several parameters to the driver at boot time or at | |
1136 | module load time. The parameters look like "video=matrox:XXX", and | |
1137 | are described in <file:Documentation/fb/matroxfb.txt>. | |
1138 | ||
1139 | config FB_MATROX_MILLENIUM | |
1140 | bool "Millennium I/II support" | |
1141 | depends on FB_MATROX | |
1142 | help | |
1143 | Say Y here if you have a Matrox Millennium or Matrox Millennium II | |
1144 | video card. If you select "Advanced lowlevel driver options" below, | |
1145 | you should check 4 bpp packed pixel, 8 bpp packed pixel, 16 bpp | |
1146 | packed pixel, 24 bpp packed pixel and 32 bpp packed pixel. You can | |
1147 | also use font widths different from 8. | |
1148 | ||
1149 | config FB_MATROX_MYSTIQUE | |
1150 | bool "Mystique support" | |
1151 | depends on FB_MATROX | |
1152 | help | |
1153 | Say Y here if you have a Matrox Mystique or Matrox Mystique 220 | |
1154 | video card. If you select "Advanced lowlevel driver options" below, | |
1155 | you should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp | |
1156 | packed pixel and 32 bpp packed pixel. You can also use font widths | |
1157 | different from 8. | |
1158 | ||
1159 | config FB_MATROX_G | |
1160 | bool "G100/G200/G400/G450/G550 support" | |
1161 | depends on FB_MATROX | |
1162 | ---help--- | |
1163 | Say Y here if you have a Matrox G100, G200, G400, G450 or G550 based | |
1164 | video card. If you select "Advanced lowlevel driver options", you | |
1165 | should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp packed | |
1166 | pixel and 32 bpp packed pixel. You can also use font widths | |
1167 | different from 8. | |
1168 | ||
1169 | If you need support for G400 secondary head, you must first say Y to | |
1170 | "I2C support" in the character devices section, and then to | |
1171 | "Matrox I2C support" and "G400 second head support" here in the | |
1172 | framebuffer section. G450/G550 secondary head and digital output | |
1173 | are supported without additional modules. | |
1174 | ||
1175 | The driver starts in monitor mode. You must use the matroxset tool | |
1176 | (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to | |
1177 | swap primary and secondary head outputs, or to change output mode. | |
1178 | Secondary head driver always start in 640x480 resolution and you | |
1179 | must use fbset to change it. | |
1180 | ||
1181 | Do not forget that second head supports only 16 and 32 bpp | |
1182 | packed pixels, so it is a good idea to compile them into the kernel | |
1183 | too. You can use only some font widths, as the driver uses generic | |
1184 | painting procedures (the secondary head does not use acceleration | |
1185 | engine). | |
1186 | ||
1187 | G450/G550 hardware can display TV picture only from secondary CRTC, | |
1188 | and it performs no scaling, so picture must have 525 or 625 lines. | |
1189 | ||
1190 | config FB_MATROX_I2C | |
1191 | tristate "Matrox I2C support" | |
166f60dd JS |
1192 | depends on FB_MATROX |
1193 | select FB_DDC | |
1da177e4 LT |
1194 | ---help--- |
1195 | This drivers creates I2C buses which are needed for accessing the | |
1196 | DDC (I2C) bus present on all Matroxes, an I2C bus which | |
1197 | interconnects Matrox optional devices, like MGA-TVO on G200 and | |
1198 | G400, and the secondary head DDC bus, present on G400 only. | |
1199 | ||
1200 | You can say Y or M here if you want to experiment with monitor | |
1201 | detection code. You must say Y or M here if you want to use either | |
1202 | second head of G400 or MGA-TVO on G200 or G400. | |
1203 | ||
1204 | If you compile it as module, it will create a module named | |
1205 | i2c-matroxfb. | |
1206 | ||
1207 | config FB_MATROX_MAVEN | |
1208 | tristate "G400 second head support" | |
1209 | depends on FB_MATROX_G && FB_MATROX_I2C | |
1210 | ---help--- | |
1211 | WARNING !!! This support does not work with G450 !!! | |
1212 | ||
1213 | Say Y or M here if you want to use a secondary head (meaning two | |
1214 | monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary | |
1215 | head is not compatible with accelerated XFree 3.3.x SVGA servers - | |
1216 | secondary head output is blanked while you are in X. With XFree | |
1217 | 3.9.17 preview you can use both heads if you use SVGA over fbdev or | |
1218 | the fbdev driver on first head and the fbdev driver on second head. | |
1219 | ||
1220 | If you compile it as module, two modules are created, | |
1221 | matroxfb_crtc2 and matroxfb_maven. Matroxfb_maven is needed for | |
1222 | both G200 and G400, matroxfb_crtc2 is needed only by G400. You must | |
1223 | also load i2c-matroxfb to get it to run. | |
1224 | ||
1225 | The driver starts in monitor mode and you must use the matroxset | |
1226 | tool (available at | |
1227 | <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to | |
1228 | PAL or NTSC or to swap primary and secondary head outputs. | |
1229 | Secondary head driver also always start in 640x480 resolution, you | |
1230 | must use fbset to change it. | |
1231 | ||
1232 | Also do not forget that second head supports only 16 and 32 bpp | |
1233 | packed pixels, so it is a good idea to compile them into the kernel | |
1234 | too. You can use only some font widths, as the driver uses generic | |
1235 | painting procedures (the secondary head does not use acceleration | |
1236 | engine). | |
1237 | ||
1238 | config FB_MATROX_MULTIHEAD | |
1239 | bool "Multihead support" | |
1240 | depends on FB_MATROX | |
1241 | ---help--- | |
1242 | Say Y here if you have more than one (supported) Matrox device in | |
1243 | your computer and you want to use all of them for different monitors | |
1244 | ("multihead"). If you have only one device, you should say N because | |
1245 | the driver compiled with Y is larger and a bit slower, especially on | |
1246 | ia32 (ix86). | |
1247 | ||
1248 | If you said M to "Matrox unified accelerated driver" and N here, you | |
1249 | will still be able to use several Matrox devices simultaneously: | |
1250 | insert several instances of the module matroxfb into the kernel | |
1251 | with insmod, supplying the parameter "dev=N" where N is 0, 1, etc. | |
1252 | for the different Matrox devices. This method is slightly faster but | |
1253 | uses 40 KB of kernel memory per Matrox card. | |
1254 | ||
1255 | There is no need for enabling 'Matrox multihead support' if you have | |
1256 | only one Matrox card in the box. | |
1257 | ||
1da177e4 LT |
1258 | config FB_RADEON |
1259 | tristate "ATI Radeon display support" | |
1260 | depends on FB && PCI | |
e0e34ef7 | 1261 | select FB_BACKLIGHT if FB_RADEON_BACKLIGHT |
1da177e4 LT |
1262 | select FB_MODE_HELPERS |
1263 | select FB_CFB_FILLRECT | |
1264 | select FB_CFB_COPYAREA | |
1265 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1266 | select FB_MACMODES if PPC_OF |
1267 | help | |
1268 | Choose this option if you want to use an ATI Radeon graphics card as | |
1269 | a framebuffer device. There are both PCI and AGP versions. You | |
1270 | don't need to choose this to run the Radeon in plain VGA mode. | |
1271 | ||
1272 | If you say Y here and want DDC/I2C support you must first say Y to | |
1273 | "I2C support" and "I2C bit-banging support" in the character devices | |
1274 | section. | |
1275 | ||
1276 | If you say M here then "I2C support" and "I2C bit-banging support" | |
1277 | can be build either as modules or built-in. | |
1278 | ||
1279 | There is a product page at | |
f510a3c3 | 1280 | http://apps.ati.com/ATIcompare/ |
5474c120 | 1281 | |
1da177e4 LT |
1282 | config FB_RADEON_I2C |
1283 | bool "DDC/I2C for ATI Radeon support" | |
1284 | depends on FB_RADEON | |
166f60dd | 1285 | select FB_DDC |
1da177e4 LT |
1286 | default y |
1287 | help | |
1288 | Say Y here if you want DDC/I2C support for your Radeon board. | |
1289 | ||
5474c120 MH |
1290 | config FB_RADEON_BACKLIGHT |
1291 | bool "Support for backlight control" | |
e0e34ef7 | 1292 | depends on FB_RADEON |
5474c120 MH |
1293 | default y |
1294 | help | |
1295 | Say Y here if you want to control the backlight of your display. | |
1296 | ||
1da177e4 LT |
1297 | config FB_RADEON_DEBUG |
1298 | bool "Lots of debug output from Radeon driver" | |
1299 | depends on FB_RADEON | |
1300 | default n | |
1301 | help | |
1302 | Say Y here if you want the Radeon driver to output all sorts | |
09509603 | 1303 | of debugging information to provide to the maintainer when |
1da177e4 LT |
1304 | something goes wrong. |
1305 | ||
1306 | config FB_ATY128 | |
1307 | tristate "ATI Rage128 display support" | |
1308 | depends on FB && PCI | |
1309 | select FB_CFB_FILLRECT | |
1310 | select FB_CFB_COPYAREA | |
1311 | select FB_CFB_IMAGEBLIT | |
e0e34ef7 | 1312 | select FB_BACKLIGHT if FB_ATY128_BACKLIGHT |
1da177e4 LT |
1313 | select FB_MACMODES if PPC_PMAC |
1314 | help | |
1315 | This driver supports graphics boards with the ATI Rage128 chips. | |
1316 | Say Y if you have such a graphics board and read | |
1317 | <file:Documentation/fb/aty128fb.txt>. | |
1318 | ||
1319 | To compile this driver as a module, choose M here: the | |
1320 | module will be called aty128fb. | |
1321 | ||
5474c120 MH |
1322 | config FB_ATY128_BACKLIGHT |
1323 | bool "Support for backlight control" | |
e0e34ef7 | 1324 | depends on FB_ATY128 |
5474c120 MH |
1325 | default y |
1326 | help | |
1327 | Say Y here if you want to control the backlight of your display. | |
1328 | ||
1da177e4 LT |
1329 | config FB_ATY |
1330 | tristate "ATI Mach64 display support" if PCI || ATARI | |
f2e782ef | 1331 | depends on FB && !SPARC32 |
1da177e4 LT |
1332 | select FB_CFB_FILLRECT |
1333 | select FB_CFB_COPYAREA | |
1334 | select FB_CFB_IMAGEBLIT | |
e0e34ef7 | 1335 | select FB_BACKLIGHT if FB_ATY_BACKLIGHT |
1da177e4 LT |
1336 | select FB_MACMODES if PPC |
1337 | help | |
1338 | This driver supports graphics boards with the ATI Mach64 chips. | |
1339 | Say Y if you have such a graphics board. | |
1340 | ||
1341 | To compile this driver as a module, choose M here: the | |
1342 | module will be called atyfb. | |
1343 | ||
1344 | config FB_ATY_CT | |
1345 | bool "Mach64 CT/VT/GT/LT (incl. 3D RAGE) support" | |
1346 | depends on PCI && FB_ATY | |
8d74c1fd | 1347 | default y if SPARC64 && PCI |
1da177e4 LT |
1348 | help |
1349 | Say Y here to support use of ATI's 64-bit Rage boards (or other | |
1350 | boards based on the Mach64 CT, VT, GT, and LT chipsets) as a | |
1351 | framebuffer device. The ATI product support page for these boards | |
1352 | is at <http://support.ati.com/products/pc/mach64/>. | |
1353 | ||
1354 | config FB_ATY_GENERIC_LCD | |
1355 | bool "Mach64 generic LCD support (EXPERIMENTAL)" | |
1356 | depends on FB_ATY_CT | |
1357 | help | |
1358 | Say Y if you have a laptop with an ATI Rage LT PRO, Rage Mobility, | |
1359 | Rage XC, or Rage XL chipset. | |
1360 | ||
1da177e4 LT |
1361 | config FB_ATY_GX |
1362 | bool "Mach64 GX support" if PCI | |
1363 | depends on FB_ATY | |
1364 | default y if ATARI | |
1365 | help | |
1366 | Say Y here to support use of the ATI Mach64 Graphics Expression | |
1367 | board (or other boards based on the Mach64 GX chipset) as a | |
1368 | framebuffer device. The ATI product support page for these boards | |
1369 | is at | |
1370 | <http://support.ati.com/products/pc/mach64/graphics_xpression.html>. | |
1371 | ||
5474c120 MH |
1372 | config FB_ATY_BACKLIGHT |
1373 | bool "Support for backlight control" | |
e0e34ef7 | 1374 | depends on FB_ATY |
5474c120 MH |
1375 | default y |
1376 | help | |
1377 | Say Y here if you want to control the backlight of your display. | |
1378 | ||
a268422d OZ |
1379 | config FB_S3 |
1380 | tristate "S3 Trio/Virge support" | |
1381 | depends on FB && PCI | |
1382 | select FB_CFB_FILLRECT | |
1383 | select FB_CFB_COPYAREA | |
1384 | select FB_CFB_IMAGEBLIT | |
1385 | select FB_TILEBLITTING | |
1386 | select FB_SVGALIB | |
b2f594fd | 1387 | select VGASTATE |
8db51668 | 1388 | select FONT_8x16 if FRAMEBUFFER_CONSOLE |
a268422d OZ |
1389 | ---help--- |
1390 | Driver for graphics boards with S3 Trio / S3 Virge chip. | |
1391 | ||
1da177e4 LT |
1392 | config FB_SAVAGE |
1393 | tristate "S3 Savage support" | |
1394 | depends on FB && PCI && EXPERIMENTAL | |
1da177e4 LT |
1395 | select FB_MODE_HELPERS |
1396 | select FB_CFB_FILLRECT | |
1397 | select FB_CFB_COPYAREA | |
1398 | select FB_CFB_IMAGEBLIT | |
b2f594fd | 1399 | select VGASTATE |
1da177e4 LT |
1400 | help |
1401 | This driver supports notebooks and computers with S3 Savage PCI/AGP | |
1402 | chips. | |
1403 | ||
1404 | Say Y if you have such a graphics card. | |
1405 | ||
1406 | To compile this driver as a module, choose M here; the module | |
1407 | will be called savagefb. | |
1408 | ||
1409 | config FB_SAVAGE_I2C | |
1410 | bool "Enable DDC2 Support" | |
1411 | depends on FB_SAVAGE | |
166f60dd | 1412 | select FB_DDC |
1da177e4 LT |
1413 | help |
1414 | This enables I2C support for S3 Savage Chipsets. This is used | |
1415 | only for getting EDID information from the attached display | |
1416 | allowing for robust video mode handling and switching. | |
1417 | ||
1418 | Because fbdev-2.6 requires that drivers must be able to | |
1419 | independently validate video mode parameters, you should say Y | |
1420 | here. | |
1421 | ||
1422 | config FB_SAVAGE_ACCEL | |
1423 | bool "Enable Console Acceleration" | |
1424 | depends on FB_SAVAGE | |
1425 | default n | |
1426 | help | |
1427 | This option will compile in console acceleration support. If | |
1428 | the resulting framebuffer console has bothersome glitches, then | |
1429 | choose N here. | |
1430 | ||
1431 | config FB_SIS | |
544393fe | 1432 | tristate "SiS/XGI display support" |
1da177e4 LT |
1433 | depends on FB && PCI |
1434 | select FB_CFB_FILLRECT | |
1435 | select FB_CFB_COPYAREA | |
1436 | select FB_CFB_IMAGEBLIT | |
1da177e4 | 1437 | help |
544393fe TW |
1438 | This is the frame buffer device driver for the SiS 300, 315, 330 |
1439 | and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets. | |
1440 | Specs available at <http://www.sis.com> and <http://www.xgitech.com>. | |
1da177e4 LT |
1441 | |
1442 | To compile this driver as a module, choose M here; the module | |
1443 | will be called sisfb. | |
1444 | ||
1445 | config FB_SIS_300 | |
1446 | bool "SiS 300 series support" | |
1447 | depends on FB_SIS | |
1448 | help | |
1449 | Say Y here to support use of the SiS 300/305, 540, 630 and 730. | |
1450 | ||
1451 | config FB_SIS_315 | |
544393fe | 1452 | bool "SiS 315/330/340 series and XGI support" |
1da177e4 LT |
1453 | depends on FB_SIS |
1454 | help | |
544393fe TW |
1455 | Say Y here to support use of the SiS 315, 330 and 340 series |
1456 | (315/H/PRO, 55x, 650, 651, 740, 330, 661, 741, 760, 761) as well | |
1457 | as XGI V3XT, V5, V8 and Z7. | |
1da177e4 LT |
1458 | |
1459 | config FB_NEOMAGIC | |
1460 | tristate "NeoMagic display support" | |
1461 | depends on FB && PCI | |
1462 | select FB_MODE_HELPERS | |
1463 | select FB_CFB_FILLRECT | |
1464 | select FB_CFB_COPYAREA | |
1465 | select FB_CFB_IMAGEBLIT | |
b2f594fd | 1466 | select VGASTATE |
1da177e4 LT |
1467 | help |
1468 | This driver supports notebooks with NeoMagic PCI chips. | |
1469 | Say Y if you have such a graphics card. | |
1470 | ||
1471 | To compile this driver as a module, choose M here: the | |
1472 | module will be called neofb. | |
1473 | ||
1474 | config FB_KYRO | |
1475 | tristate "IMG Kyro support" | |
1476 | depends on FB && PCI | |
1477 | select FB_CFB_FILLRECT | |
1478 | select FB_CFB_COPYAREA | |
1479 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1480 | help |
1481 | Say Y here if you have a STG4000 / Kyro / PowerVR 3 based | |
1482 | graphics board. | |
1483 | ||
1484 | To compile this driver as a module, choose M here: the | |
1485 | module will be called kyrofb. | |
1486 | ||
1487 | config FB_3DFX | |
1488 | tristate "3Dfx Banshee/Voodoo3 display support" | |
1489 | depends on FB && PCI | |
1490 | select FB_CFB_IMAGEBLIT | |
1491 | select FB_CFB_FILLRECT | |
1492 | select FB_CFB_COPYAREA | |
1da177e4 LT |
1493 | help |
1494 | This driver supports graphics boards with the 3Dfx Banshee/Voodoo3 | |
1495 | chips. Say Y if you have such a graphics board. | |
1496 | ||
1497 | To compile this driver as a module, choose M here: the | |
1498 | module will be called tdfxfb. | |
1499 | ||
1500 | config FB_3DFX_ACCEL | |
1501 | bool "3Dfx Banshee/Voodoo3 Acceleration functions (EXPERIMENTAL)" | |
1502 | depends on FB_3DFX && EXPERIMENTAL | |
1503 | ---help--- | |
1504 | This will compile the 3Dfx Banshee/Voodoo3 frame buffer device | |
1505 | with acceleration functions. | |
1506 | ||
1507 | ||
1508 | config FB_VOODOO1 | |
1509 | tristate "3Dfx Voodoo Graphics (sst1) support" | |
1510 | depends on FB && PCI | |
1511 | select FB_CFB_FILLRECT | |
1512 | select FB_CFB_COPYAREA | |
1513 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1514 | ---help--- |
1515 | Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or | |
1516 | Voodoo2 (cvg) based graphics card. | |
1517 | ||
1518 | To compile this driver as a module, choose M here: the | |
1519 | module will be called sstfb. | |
1520 | ||
1521 | WARNING: Do not use any application that uses the 3D engine | |
1522 | (namely glide) while using this driver. | |
e403149c | 1523 | Please read the <file:Documentation/fb/sstfb.txt> for supported |
1da177e4 LT |
1524 | options and other important info support. |
1525 | ||
558b7bd8 OZ |
1526 | config FB_VT8623 |
1527 | tristate "VIA VT8623 support" | |
1528 | depends on FB && PCI | |
1529 | select FB_CFB_FILLRECT | |
1530 | select FB_CFB_COPYAREA | |
1531 | select FB_CFB_IMAGEBLIT | |
1532 | select FB_TILEBLITTING | |
1533 | select FB_SVGALIB | |
1534 | select VGASTATE | |
1535 | select FONT_8x16 if FRAMEBUFFER_CONSOLE | |
1536 | ---help--- | |
1537 | Driver for CastleRock integrated graphics core in the | |
1538 | VIA VT8623 [Apollo CLE266] chipset. | |
1539 | ||
9fa68eae KP |
1540 | config FB_CYBLA |
1541 | tristate "Cyberblade/i1 support" | |
44637a12 | 1542 | depends on FB && PCI && X86_32 && !64BIT |
9fa68eae | 1543 | select FB_CFB_IMAGEBLIT |
9fa68eae KP |
1544 | select VIDEO_SELECT |
1545 | ---help--- | |
1546 | This driver is supposed to support the Trident Cyberblade/i1 | |
1547 | graphics core integrated in the VIA VT8601A North Bridge, | |
1548 | also known as VIA Apollo PLE133. | |
1549 | ||
1550 | Status: | |
1551 | - Developed, tested and working on EPIA 5000 and EPIA 800. | |
1552 | - Does work reliable on all systems with CRT/LCD connected to | |
1553 | normal VGA ports. | |
1554 | - Should work on systems that do use the internal LCD port, but | |
1555 | this is absolutely not tested. | |
1556 | ||
1557 | Character imageblit, copyarea and rectangle fill are hw accelerated, | |
1558 | ypan scrolling is used by default. | |
1559 | ||
1560 | Please do read <file:Documentation/fb/cyblafb/*>. | |
1561 | ||
1562 | To compile this driver as a module, choose M here: the | |
1563 | module will be called cyblafb. | |
1564 | ||
1da177e4 LT |
1565 | config FB_TRIDENT |
1566 | tristate "Trident support" | |
1567 | depends on FB && PCI | |
1568 | select FB_CFB_FILLRECT | |
1569 | select FB_CFB_COPYAREA | |
1570 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1571 | ---help--- |
1572 | This driver is supposed to support graphics boards with the | |
1573 | Trident CyberXXXX/Image/CyberBlade chips mostly found in laptops | |
1574 | but also on some motherboards. For more information, read | |
1575 | <file:Documentation/fb/tridentfb.txt> | |
1576 | ||
9fa68eae KP |
1577 | Cyberblade/i1 support will be removed soon, use the cyblafb driver |
1578 | instead. | |
1579 | ||
1da177e4 LT |
1580 | Say Y if you have such a graphics board. |
1581 | ||
9fa68eae | 1582 | |
1da177e4 LT |
1583 | To compile this driver as a module, choose M here: the |
1584 | module will be called tridentfb. | |
1585 | ||
1586 | config FB_TRIDENT_ACCEL | |
1587 | bool "Trident Acceleration functions (EXPERIMENTAL)" | |
1588 | depends on FB_TRIDENT && EXPERIMENTAL | |
1589 | ---help--- | |
1590 | This will compile the Trident frame buffer device with | |
1591 | acceleration functions. | |
1592 | ||
681e1473 OZ |
1593 | config FB_ARK |
1594 | tristate "ARK 2000PV support" | |
1595 | depends on FB && PCI | |
1596 | select FB_CFB_FILLRECT | |
1597 | select FB_CFB_COPYAREA | |
1598 | select FB_CFB_IMAGEBLIT | |
1599 | select FB_TILEBLITTING | |
1600 | select FB_SVGALIB | |
1601 | select VGASTATE | |
1602 | select FONT_8x16 if FRAMEBUFFER_CONSOLE | |
1603 | ---help--- | |
1604 | Driver for PCI graphics boards with ARK 2000PV chip | |
1605 | and ICS 5342 RAMDAC. | |
1606 | ||
1da177e4 | 1607 | config FB_PM3 |
f23a06f0 KH |
1608 | tristate "Permedia3 support (EXPERIMENTAL)" |
1609 | depends on FB && PCI && EXPERIMENTAL | |
1610 | select FB_CFB_FILLRECT | |
1611 | select FB_CFB_COPYAREA | |
1612 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1613 | help |
1614 | This is the frame buffer device driver for the 3DLabs Permedia3 | |
1615 | chipset, used in Formac ProFormance III, 3DLabs Oxygen VX1 & | |
1616 | similar boards, 3DLabs Permedia3 Create!, Appian Jeronimo 2000 | |
1617 | and maybe other boards. | |
1618 | ||
1da177e4 LT |
1619 | config FB_AU1100 |
1620 | bool "Au1100 LCD Driver" | |
d1709e47 RB |
1621 | depends on (FB = y) && MIPS && SOC_AU1100 |
1622 | select FB_CFB_FILLRECT | |
1623 | select FB_CFB_COPYAREA | |
1624 | select FB_CFB_IMAGEBLIT | |
1625 | help | |
1626 | This is the framebuffer driver for the AMD Au1100 SOC. It can drive | |
1627 | various panels and CRTs by passing in kernel cmd line option | |
1628 | au1100fb:panel=<name>. | |
1da177e4 | 1629 | |
f95ec3c6 RB |
1630 | config FB_AU1200 |
1631 | bool "Au1200 LCD Driver" | |
833f8062 | 1632 | depends on (FB = y) && MIPS && SOC_AU1200 |
f95ec3c6 RB |
1633 | select FB_CFB_FILLRECT |
1634 | select FB_CFB_COPYAREA | |
1635 | select FB_CFB_IMAGEBLIT | |
1636 | help | |
1637 | This is the framebuffer driver for the AMD Au1200 SOC. It can drive | |
1638 | various panels and CRTs by passing in kernel cmd line option | |
1639 | au1200fb:panel=<name>. | |
1640 | ||
1da177e4 LT |
1641 | source "drivers/video/geode/Kconfig" |
1642 | ||
1da177e4 LT |
1643 | config FB_HIT |
1644 | tristate "HD64461 Frame Buffer support" | |
1645 | depends on FB && HD64461 | |
1646 | select FB_CFB_FILLRECT | |
1647 | select FB_CFB_COPYAREA | |
1648 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1649 | help |
1650 | This is the frame buffer device driver for the Hitachi HD64461 LCD | |
1651 | frame buffer card. | |
1652 | ||
1653 | config FB_PMAG_AA | |
1654 | bool "PMAG-AA TURBOchannel framebuffer support" | |
a9350003 | 1655 | depends on (FB = y) && TC |
1da177e4 LT |
1656 | select FB_CFB_FILLRECT |
1657 | select FB_CFB_COPYAREA | |
1658 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1659 | help |
1660 | Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1) | |
1661 | used mainly in the MIPS-based DECstation series. | |
1662 | ||
1663 | config FB_PMAG_BA | |
335dc50c MR |
1664 | tristate "PMAG-BA TURBOchannel framebuffer support" |
1665 | depends on FB && TC | |
1da177e4 LT |
1666 | select FB_CFB_FILLRECT |
1667 | select FB_CFB_COPYAREA | |
1668 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1669 | help |
1670 | Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8) | |
1671 | used mainly in the MIPS-based DECstation series. | |
1672 | ||
1673 | config FB_PMAGB_B | |
9084b005 | 1674 | tristate "PMAGB-B TURBOchannel framebuffer support" |
28ea28a6 | 1675 | depends on FB && TC |
1da177e4 LT |
1676 | select FB_CFB_FILLRECT |
1677 | select FB_CFB_COPYAREA | |
1678 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1679 | help |
1680 | Support for the PMAGB-B TURBOchannel framebuffer card used mainly | |
1681 | in the MIPS-based DECstation series. The card is currently only | |
1682 | supported in 1280x1024x8 mode. | |
1683 | ||
1684 | config FB_MAXINE | |
1685 | bool "Maxine (Personal DECstation) onboard framebuffer support" | |
a9350003 | 1686 | depends on (FB = y) && MACH_DECSTATION |
1da177e4 LT |
1687 | select FB_CFB_FILLRECT |
1688 | select FB_CFB_COPYAREA | |
1689 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1690 | help |
1691 | Support for the onboard framebuffer (1024x768x8) in the Personal | |
1692 | DECstation series (Personal DECstation 5000/20, /25, /33, /50, | |
1693 | Codename "Maxine"). | |
1694 | ||
1da177e4 | 1695 | config FB_G364 |
b38817dd YY |
1696 | bool "G364 frame buffer support" |
1697 | depends on (FB = y) && (MIPS_MAGNUM_4000 || OLIVETTI_M700) | |
1da177e4 LT |
1698 | select FB_CFB_FILLRECT |
1699 | select FB_CFB_COPYAREA | |
1700 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1701 | help |
1702 | The G364 driver is the framebuffer used in MIPS Magnum 4000 and | |
1703 | Olivetti M700-10 systems. | |
1704 | ||
1705 | config FB_68328 | |
1706 | bool "Motorola 68328 native frame buffer support" | |
833f8062 | 1707 | depends on (FB = y) && (M68328 || M68EZ328 || M68VZ328) |
1da177e4 LT |
1708 | select FB_CFB_FILLRECT |
1709 | select FB_CFB_COPYAREA | |
1710 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1711 | help |
1712 | Say Y here if you want to support the built-in frame buffer of | |
1713 | the Motorola 68328 CPU family. | |
1714 | ||
1715 | config FB_PXA | |
1716 | tristate "PXA LCD framebuffer support" | |
1717 | depends on FB && ARCH_PXA | |
1718 | select FB_CFB_FILLRECT | |
1719 | select FB_CFB_COPYAREA | |
1720 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1721 | ---help--- |
1722 | Frame buffer driver for the built-in LCD controller in the Intel | |
1723 | PXA2x0 processor. | |
1724 | ||
1725 | This driver is also available as a module ( = code which can be | |
1726 | inserted and removed from the running kernel whenever you want). The | |
74b4f042 | 1727 | module will be called pxafb. If you want to compile it as a module, |
39f5fb30 | 1728 | say M here and read <file:Documentation/kbuild/modules.txt>. |
1da177e4 LT |
1729 | |
1730 | If unsure, say N. | |
1731 | ||
1da177e4 LT |
1732 | config FB_PXA_PARAMETERS |
1733 | bool "PXA LCD command line parameters" | |
1734 | default n | |
1735 | depends on FB_PXA | |
1736 | ---help--- | |
1737 | Enable the use of kernel command line or module parameters | |
1738 | to configure the physical properties of the LCD panel when | |
1739 | using the PXA LCD driver. | |
1740 | ||
1741 | This option allows you to override the panel parameters | |
1742 | supplied by the platform in order to support multiple | |
1743 | different models of flatpanel. If you will only be using a | |
1744 | single model of flatpanel then you can safely leave this | |
1745 | option disabled. | |
1746 | ||
1747 | <file:Documentation/fb/pxafb.txt> describes the available parameters. | |
1748 | ||
22caf042 MR |
1749 | config FB_MBX |
1750 | tristate "2700G LCD framebuffer support" | |
1751 | depends on FB && ARCH_PXA | |
1752 | select FB_CFB_FILLRECT | |
1753 | select FB_CFB_COPYAREA | |
1754 | select FB_CFB_IMAGEBLIT | |
1755 | ---help--- | |
1756 | Framebuffer driver for the Intel 2700G (Marathon) Graphics | |
1757 | Accelerator | |
1758 | ||
1759 | config FB_MBX_DEBUG | |
1760 | bool "Enable debugging info via debugfs" | |
1761 | depends on FB_MBX && DEBUG_FS | |
1762 | default n | |
1763 | ---help--- | |
1764 | Enable this if you want debugging information using the debug | |
1765 | filesystem (debugfs) | |
1766 | ||
1767 | If unsure, say N. | |
1768 | ||
ecc41d5e RD |
1769 | config FB_W100 |
1770 | tristate "W100 frame buffer support" | |
1771 | depends on FB && PXA_SHARPSL | |
1772 | select FB_CFB_FILLRECT | |
1773 | select FB_CFB_COPYAREA | |
1774 | select FB_CFB_IMAGEBLIT | |
ecc41d5e RD |
1775 | ---help--- |
1776 | Frame buffer driver for the w100 as found on the Sharp SL-Cxx series. | |
1777 | ||
1778 | This driver is also available as a module ( = code which can be | |
1779 | inserted and removed from the running kernel whenever you want). The | |
74b4f042 | 1780 | module will be called w100fb. If you want to compile it as a module, |
39f5fb30 | 1781 | say M here and read <file:Documentation/kbuild/modules.txt>. |
ecc41d5e RD |
1782 | |
1783 | If unsure, say N. | |
1da177e4 | 1784 | |
20fd5767 AP |
1785 | config FB_S3C2410 |
1786 | tristate "S3C2410 LCD framebuffer support" | |
1787 | depends on FB && ARCH_S3C2410 | |
1788 | select FB_CFB_FILLRECT | |
1789 | select FB_CFB_COPYAREA | |
1790 | select FB_CFB_IMAGEBLIT | |
20fd5767 AP |
1791 | ---help--- |
1792 | Frame buffer driver for the built-in LCD controller in the Samsung | |
1793 | S3C2410 processor. | |
1794 | ||
1795 | This driver is also available as a module ( = code which can be | |
1796 | inserted and removed from the running kernel whenever you want). The | |
1797 | module will be called s3c2410fb. If you want to compile it as a module, | |
39f5fb30 | 1798 | say M here and read <file:Documentation/kbuild/modules.txt>. |
20fd5767 AP |
1799 | |
1800 | If unsure, say N. | |
1801 | config FB_S3C2410_DEBUG | |
1802 | bool "S3C2410 lcd debug messages" | |
1803 | depends on FB_S3C2410 | |
1804 | help | |
1805 | Turn on debugging messages. Note that you can set/unset at run time | |
1806 | through sysfs | |
1807 | ||
5fc404e4 BD |
1808 | config FB_SM501 |
1809 | tristate "Silicon Motion SM501 framebuffer support" | |
1810 | depends on FB && MFD_SM501 | |
1811 | select FB_CFB_FILLRECT | |
1812 | select FB_CFB_COPYAREA | |
1813 | select FB_CFB_IMAGEBLIT | |
1814 | ---help--- | |
1815 | Frame buffer driver for the CRT and LCD controllers in the Silicon | |
1816 | Motion SM501. | |
1817 | ||
1818 | This driver is also available as a module ( = code which can be | |
1819 | inserted and removed from the running kernel whenever you want). The | |
1820 | module will be called sm501fb. If you want to compile it as a module, | |
e403149c | 1821 | say M here and read <file:Documentation/kbuild/modules.txt>. |
5fc404e4 BD |
1822 | |
1823 | If unsure, say N. | |
1824 | ||
1825 | ||
36c9366e VW |
1826 | config FB_PNX4008_DUM |
1827 | tristate "Display Update Module support on Philips PNX4008 board" | |
1828 | depends on FB && ARCH_PNX4008 | |
1829 | ---help--- | |
1830 | Say Y here to enable support for PNX4008 Display Update Module (DUM) | |
1831 | ||
1832 | config FB_PNX4008_DUM_RGB | |
1833 | tristate "RGB Framebuffer support on Philips PNX4008 board" | |
1834 | depends on FB_PNX4008_DUM | |
1835 | select FB_CFB_FILLRECT | |
1836 | select FB_CFB_COPYAREA | |
1837 | select FB_CFB_IMAGEBLIT | |
1838 | ---help--- | |
1839 | Say Y here to enable support for PNX4008 RGB Framebuffer | |
1840 | ||
a3d89983 PM |
1841 | config FB_IBM_GXT4500 |
1842 | tristate "Framebuffer support for IBM GXT4500P adaptor" | |
0058f479 | 1843 | depends on FB && PPC |
a3d89983 PM |
1844 | select FB_CFB_FILLRECT |
1845 | select FB_CFB_COPYAREA | |
1846 | select FB_CFB_IMAGEBLIT | |
1847 | ---help--- | |
1848 | Say Y here to enable support for the IBM GXT4500P display | |
1849 | adaptor, found on some IBM System P (pSeries) machines. | |
1850 | ||
310d8c11 | 1851 | config FB_PS3 |
9e6b99bd GU |
1852 | tristate "PS3 GPU framebuffer driver" |
1853 | depends on FB && PS3_PS3AV | |
92c4579d GU |
1854 | select FB_SYS_FILLRECT |
1855 | select FB_SYS_COPYAREA | |
1856 | select FB_SYS_IMAGEBLIT | |
1857 | select FB_SYS_FOPS | |
23e9c94c | 1858 | select VT_HW_CONSOLE_BINDING if FRAMEBUFFER_CONSOLE |
310d8c11 GU |
1859 | ---help--- |
1860 | Include support for the virtual frame buffer in the PS3 platform. | |
1861 | ||
1862 | config FB_PS3_DEFAULT_SIZE_M | |
1863 | int "PS3 default frame buffer size (in MiB)" | |
1864 | depends on FB_PS3 | |
50b2529e | 1865 | default 9 |
310d8c11 GU |
1866 | ---help--- |
1867 | This is the default size (in MiB) of the virtual frame buffer in | |
1868 | the PS3. | |
1869 | The default value can be overridden on the kernel command line | |
1870 | using the "ps3fb" option (e.g. "ps3fb=9M"); | |
1871 | ||
147394c8 AK |
1872 | config FB_XILINX |
1873 | tristate "Xilinx frame buffer support" | |
1874 | depends on FB && XILINX_VIRTEX | |
1875 | select FB_CFB_FILLRECT | |
1876 | select FB_CFB_COPYAREA | |
1877 | select FB_CFB_IMAGEBLIT | |
1878 | ---help--- | |
1879 | Include support for the Xilinx ML300/ML403 reference design | |
1880 | framebuffer. ML300 carries a 640*480 LCD display on the board, | |
1881 | ML403 uses a standard DB15 VGA connector. | |
1882 | ||
1da177e4 LT |
1883 | config FB_VIRTUAL |
1884 | tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)" | |
1885 | depends on FB | |
87b48849 AD |
1886 | select FB_SYS_FILLRECT |
1887 | select FB_SYS_COPYAREA | |
1888 | select FB_SYS_IMAGEBLIT | |
52102c07 | 1889 | select FB_SYS_FOPS |
1da177e4 LT |
1890 | ---help--- |
1891 | This is a `virtual' frame buffer device. It operates on a chunk of | |
1892 | unswappable kernel memory instead of on the memory of a graphics | |
1893 | board. This means you cannot see any output sent to this frame | |
1894 | buffer device, while it does consume precious memory. The main use | |
1895 | of this frame buffer device is testing and debugging the frame | |
1896 | buffer subsystem. Do NOT enable it for normal systems! To protect | |
1897 | the innocent, it has to be enabled explicitly at boot time using the | |
1898 | kernel option `video=vfb:'. | |
1899 | ||
1900 | To compile this driver as a module, choose M here: the | |
66cf7512 MF |
1901 | module will be called vfb. In order to load it, you must use |
1902 | the vfb_enable=1 option. | |
1da177e4 LT |
1903 | |
1904 | If unsure, say N. | |
e0e34ef7 | 1905 | |
f08f3895 | 1906 | source "drivers/video/omap/Kconfig" |
0058f479 | 1907 | |
179b025f RD |
1908 | source "drivers/video/backlight/Kconfig" |
1909 | source "drivers/video/display/Kconfig" | |
1910 | ||
1da177e4 LT |
1911 | if VT |
1912 | source "drivers/video/console/Kconfig" | |
1913 | endif | |
1914 | ||
1915 | if FB || SGI_NEWPORT_CONSOLE | |
1916 | source "drivers/video/logo/Kconfig" | |
1917 | endif | |
1918 | ||
1da177e4 | 1919 | endmenu |