]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | # |
2 | # Video configuration | |
3 | # | |
4 | ||
5 | menu "Graphics support" | |
6 | ||
8f27489d | 7 | source "drivers/video/backlight/Kconfig" |
2ee12163 | 8 | source "drivers/video/display/Kconfig" |
ba70710e | 9 | |
b2f594fd AD |
10 | config VGASTATE |
11 | tristate | |
12 | default n | |
13 | ||
1da177e4 LT |
14 | config FB |
15 | tristate "Support for frame buffer devices" | |
16 | ---help--- | |
17 | The frame buffer device provides an abstraction for the graphics | |
18 | hardware. It represents the frame buffer of some video hardware and | |
19 | allows application software to access the graphics hardware through | |
20 | a well-defined interface, so the software doesn't need to know | |
21 | anything about the low-level (hardware register) stuff. | |
22 | ||
23 | Frame buffer devices work identically across the different | |
24 | architectures supported by Linux and make the implementation of | |
25 | application programs easier and more portable; at this point, an X | |
26 | server exists which uses the frame buffer device exclusively. | |
27 | On several non-X86 architectures, the frame buffer device is the | |
28 | only way to use the graphics hardware. | |
29 | ||
30 | The device is accessed through special device nodes, usually located | |
31 | in the /dev directory, i.e. /dev/fb*. | |
32 | ||
33 | You need an utility program called fbset to make full use of frame | |
34 | buffer devices. Please read <file:Documentation/fb/framebuffer.txt> | |
35 | and the Framebuffer-HOWTO at | |
36 | <http://www.tahallah.demon.co.uk/programming/prog.html> for more | |
37 | information. | |
38 | ||
39 | Say Y here and to the driver for your graphics board below if you | |
40 | are compiling a kernel for a non-x86 architecture. | |
41 | ||
42 | If you are compiling for the x86 architecture, you can say Y if you | |
43 | want to play with it, but it is not essential. Please note that | |
44 | running graphical applications that directly touch the hardware | |
45 | (e.g. an accelerated X server) and that are not frame buffer | |
46 | device-aware may cause unexpected results. If unsure, say N. | |
47 | ||
e0e34ef7 JS |
48 | config FIRMWARE_EDID |
49 | bool "Enable firmware EDID" | |
50 | depends on FB | |
51 | default n | |
52 | ---help--- | |
53 | This enables access to the EDID transferred from the firmware. | |
54 | On the i386, this is from the Video BIOS. Enable this if DDC/I2C | |
55 | transfers do not work for your driver and if you are using | |
56 | nvidiafb, i810fb or savagefb. | |
57 | ||
58 | In general, choosing Y for this option is safe. If you | |
59 | experience extremely long delays while booting before you get | |
60 | something on your display, try setting this to N. Matrox cards in | |
61 | combination with certain motherboards and monitors are known to | |
62 | suffer from this problem. | |
63 | ||
fc5891c8 DM |
64 | config FB_DDC |
65 | tristate | |
e0e34ef7 JS |
66 | depends on FB |
67 | select I2C_ALGOBIT | |
68 | select I2C | |
fc5891c8 DM |
69 | default n |
70 | ||
1da177e4 LT |
71 | config FB_CFB_FILLRECT |
72 | tristate | |
73 | depends on FB | |
74 | default n | |
75 | ---help--- | |
76 | Include the cfb_fillrect function for generic software rectangle | |
77 | filling. This is used by drivers that don't provide their own | |
78 | (accelerated) version. | |
79 | ||
80 | config FB_CFB_COPYAREA | |
81 | tristate | |
82 | depends on FB | |
83 | default n | |
84 | ---help--- | |
85 | Include the cfb_copyarea function for generic software area copying. | |
86 | This is used by drivers that don't provide their own (accelerated) | |
87 | version. | |
88 | ||
89 | config FB_CFB_IMAGEBLIT | |
90 | tristate | |
91 | depends on FB | |
92 | default n | |
93 | ---help--- | |
94 | Include the cfb_imageblit function for generic software image | |
95 | blitting. This is used by drivers that don't provide their own | |
96 | (accelerated) version. | |
97 | ||
60b59bea JK |
98 | config FB_DEFERRED_IO |
99 | bool | |
100 | depends on FB | |
101 | default y | |
102 | ||
a268422d OZ |
103 | config FB_SVGALIB |
104 | tristate | |
105 | depends on FB | |
106 | default n | |
107 | ---help--- | |
108 | Common utility functions useful to fbdev drivers of VGA-based | |
109 | cards. | |
110 | ||
1da177e4 LT |
111 | config FB_MACMODES |
112 | tristate | |
113 | depends on FB | |
114 | default n | |
115 | ||
5474c120 | 116 | config FB_BACKLIGHT |
4b755999 MH |
117 | bool |
118 | depends on FB | |
119 | select BACKLIGHT_LCD_SUPPORT | |
120 | select BACKLIGHT_CLASS_DEVICE | |
121 | default n | |
5474c120 | 122 | |
1da177e4 LT |
123 | config FB_MODE_HELPERS |
124 | bool "Enable Video Mode Handling Helpers" | |
125 | depends on FB | |
126 | default n | |
127 | ---help--- | |
128 | This enables functions for handling video modes using the | |
129 | Generalized Timing Formula and the EDID parser. A few drivers rely | |
130 | on this feature such as the radeonfb, rivafb, and the i810fb. If | |
131 | your driver does not take advantage of this feature, choosing Y will | |
132 | just increase the kernel size by about 5K. | |
133 | ||
134 | config FB_TILEBLITTING | |
135 | bool "Enable Tile Blitting Support" | |
136 | depends on FB | |
137 | default n | |
138 | ---help--- | |
139 | This enables tile blitting. Tile blitting is a drawing technique | |
140 | where the screen is divided into rectangular sections (tiles), whereas | |
141 | the standard blitting divides the screen into pixels. Because the | |
142 | default drawing element is a tile, drawing functions will be passed | |
143 | parameters in terms of number of tiles instead of number of pixels. | |
144 | For example, to draw a single character, instead of using bitmaps, | |
145 | an index to an array of bitmaps will be used. To clear or move a | |
146 | rectangular section of a screen, the rectangle will be described in | |
147 | terms of number of tiles in the x- and y-axis. | |
148 | ||
149 | This is particularly important to one driver, matroxfb. If | |
150 | unsure, say N. | |
151 | ||
10ccaf4b | 152 | comment "Frame buffer hardware drivers" |
e0e34ef7 JS |
153 | depends on FB |
154 | ||
1da177e4 LT |
155 | config FB_CIRRUS |
156 | tristate "Cirrus Logic support" | |
157 | depends on FB && (ZORRO || PCI) | |
158 | select FB_CFB_FILLRECT | |
159 | select FB_CFB_COPYAREA | |
160 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
161 | ---help--- |
162 | This enables support for Cirrus Logic GD542x/543x based boards on | |
163 | Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum. | |
164 | ||
165 | If you have a PCI-based system, this enables support for these | |
166 | chips: GD-543x, GD-544x, GD-5480. | |
167 | ||
168 | Please read the file <file:Documentation/fb/cirrusfb.txt>. | |
169 | ||
170 | Say N unless you have such a graphics board or plan to get one | |
171 | before you next recompile the kernel. | |
172 | ||
173 | config FB_PM2 | |
174 | tristate "Permedia2 support" | |
175 | depends on FB && ((AMIGA && BROKEN) || PCI) | |
176 | select FB_CFB_FILLRECT | |
177 | select FB_CFB_COPYAREA | |
178 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
179 | help |
180 | This is the frame buffer device driver for the Permedia2 AGP frame | |
181 | buffer card from ASK, aka `Graphic Blaster Exxtreme'. There is a | |
182 | product page at | |
183 | <http://www.ask.com.hk/product/Permedia%202/permedia2.htm>. | |
184 | ||
185 | config FB_PM2_FIFO_DISCONNECT | |
186 | bool "enable FIFO disconnect feature" | |
187 | depends on FB_PM2 && PCI | |
188 | help | |
189 | Support the Permedia2 FIFO disconnect feature (see CONFIG_FB_PM2). | |
190 | ||
191 | config FB_ARMCLCD | |
192 | tristate "ARM PrimeCell PL110 support" | |
193 | depends on FB && ARM && ARM_AMBA | |
194 | select FB_CFB_FILLRECT | |
195 | select FB_CFB_COPYAREA | |
196 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
197 | help |
198 | This framebuffer device driver is for the ARM PrimeCell PL110 | |
199 | Colour LCD controller. ARM PrimeCells provide the building | |
200 | blocks for System on a Chip devices. | |
201 | ||
202 | If you want to compile this as a module (=code which can be | |
203 | inserted into and removed from the running kernel), say M | |
39f5fb30 | 204 | here and read <file:Documentation/kbuild/modules.txt>. The module |
1da177e4 LT |
205 | will be called amba-clcd. |
206 | ||
903e2bbd MS |
207 | choice |
208 | ||
209 | depends on FB_ARMCLCD && (ARCH_LH7A40X || ARCH_LH7952X) | |
210 | prompt "LCD Panel" | |
211 | default FB_ARMCLCD_SHARP_LQ035Q7DB02 | |
212 | ||
213 | config FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT | |
214 | bool "LogicPD LCD 3.5\" QVGA w/HRTFT IC" | |
215 | help | |
216 | This is an implementation of the Sharp LQ035Q7DB02, a 3.5" | |
cab00891 | 217 | color QVGA, HRTFT panel. The LogicPD device includes |
903e2bbd MS |
218 | an integrated HRTFT controller IC. |
219 | The native resolution is 240x320. | |
220 | ||
221 | config FB_ARMCLCD_SHARP_LQ057Q3DC02 | |
222 | bool "LogicPD LCD 5.7\" QVGA" | |
223 | help | |
224 | This is an implementation of the Sharp LQ057Q3DC02, a 5.7" | |
225 | color QVGA, TFT panel. The LogicPD device includes an | |
226 | The native resolution is 320x240. | |
227 | ||
228 | config FB_ARMCLCD_SHARP_LQ64D343 | |
229 | bool "LogicPD LCD 6.4\" VGA" | |
230 | help | |
231 | This is an implementation of the Sharp LQ64D343, a 6.4" | |
232 | color VGA, TFT panel. The LogicPD device includes an | |
233 | The native resolution is 640x480. | |
234 | ||
235 | config FB_ARMCLCD_SHARP_LQ10D368 | |
236 | bool "LogicPD LCD 10.4\" VGA" | |
237 | help | |
238 | This is an implementation of the Sharp LQ10D368, a 10.4" | |
239 | color VGA, TFT panel. The LogicPD device includes an | |
240 | The native resolution is 640x480. | |
241 | ||
242 | ||
243 | config FB_ARMCLCD_SHARP_LQ121S1DG41 | |
244 | bool "LogicPD LCD 12.1\" SVGA" | |
245 | help | |
246 | This is an implementation of the Sharp LQ121S1DG41, a 12.1" | |
247 | color SVGA, TFT panel. The LogicPD device includes an | |
248 | The native resolution is 800x600. | |
249 | ||
250 | This panel requires a clock rate may be an integer fraction | |
251 | of the base LCDCLK frequency. The driver will select the | |
252 | highest frequency available that is lower than the maximum | |
253 | allowed. The panel may flicker if the clock rate is | |
254 | slower than the recommended minimum. | |
255 | ||
256 | config FB_ARMCLCD_AUO_A070VW01_WIDE | |
257 | bool "AU Optronics A070VW01 LCD 7.0\" WIDE" | |
258 | help | |
259 | This is an implementation of the AU Optronics, a 7.0" | |
260 | WIDE Color. The native resolution is 234x480. | |
261 | ||
262 | config FB_ARMCLCD_HITACHI | |
263 | bool "Hitachi Wide Screen 800x480" | |
264 | help | |
265 | This is an implementation of the Hitachi 800x480. | |
266 | ||
267 | endchoice | |
268 | ||
269 | ||
1da177e4 LT |
270 | config FB_ACORN |
271 | bool "Acorn VIDC support" | |
272 | depends on (FB = y) && ARM && (ARCH_ACORN || ARCH_CLPS7500) | |
273 | select FB_CFB_FILLRECT | |
274 | select FB_CFB_COPYAREA | |
275 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
276 | help |
277 | This is the frame buffer device driver for the Acorn VIDC graphics | |
278 | hardware found in Acorn RISC PCs and other ARM-based machines. If | |
279 | unsure, say N. | |
280 | ||
281 | config FB_CLPS711X | |
282 | bool "CLPS711X LCD support" | |
283 | depends on (FB = y) && ARM && ARCH_CLPS711X | |
284 | select FB_CFB_FILLRECT | |
285 | select FB_CFB_COPYAREA | |
286 | select FB_CFB_IMAGEBLIT | |
e65c0850 RD |
287 | help |
288 | Say Y to enable the Framebuffer driver for the CLPS7111 and | |
289 | EP7212 processors. | |
1da177e4 LT |
290 | |
291 | config FB_SA1100 | |
292 | bool "SA-1100 LCD support" | |
293 | depends on (FB = y) && ARM && ARCH_SA1100 | |
294 | select FB_CFB_FILLRECT | |
295 | select FB_CFB_COPYAREA | |
296 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
297 | help |
298 | This is a framebuffer device for the SA-1100 LCD Controller. | |
299 | See <http://www.linux-fbdev.org/> for information on framebuffer | |
300 | devices. | |
301 | ||
302 | If you plan to use the LCD display with your SA-1100 system, say | |
303 | Y here. | |
304 | ||
7c2f891c SH |
305 | config FB_IMX |
306 | tristate "Motorola i.MX LCD support" | |
307 | depends on FB && ARM && ARCH_IMX | |
308 | select FB_CFB_FILLRECT | |
309 | select FB_CFB_COPYAREA | |
310 | select FB_CFB_IMAGEBLIT | |
7c2f891c | 311 | |
1da177e4 LT |
312 | config FB_CYBER2000 |
313 | tristate "CyberPro 2000/2010/5000 support" | |
314 | depends on FB && PCI && (BROKEN || !SPARC64) | |
315 | select FB_CFB_FILLRECT | |
316 | select FB_CFB_COPYAREA | |
317 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
318 | help |
319 | This enables support for the Integraphics CyberPro 20x0 and 5000 | |
320 | VGA chips used in the Rebel.com Netwinder and other machines. | |
321 | Say Y if you have a NetWinder or a graphics card containing this | |
322 | device, otherwise say N. | |
323 | ||
324 | config FB_APOLLO | |
325 | bool | |
326 | depends on (FB = y) && APOLLO | |
327 | default y | |
328 | select FB_CFB_FILLRECT | |
329 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
330 | |
331 | config FB_Q40 | |
332 | bool | |
333 | depends on (FB = y) && Q40 | |
334 | default y | |
335 | select FB_CFB_FILLRECT | |
336 | select FB_CFB_COPYAREA | |
337 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
338 | |
339 | config FB_AMIGA | |
340 | tristate "Amiga native chipset support" | |
341 | depends on FB && AMIGA | |
1da177e4 LT |
342 | help |
343 | This is the frame buffer device driver for the builtin graphics | |
344 | chipset found in Amigas. | |
345 | ||
346 | To compile this driver as a module, choose M here: the | |
347 | module will be called amifb. | |
348 | ||
349 | config FB_AMIGA_OCS | |
350 | bool "Amiga OCS chipset support" | |
351 | depends on FB_AMIGA | |
352 | help | |
353 | This enables support for the original Agnus and Denise video chips, | |
354 | found in the Amiga 1000 and most A500's and A2000's. If you intend | |
355 | to run Linux on any of these systems, say Y; otherwise say N. | |
356 | ||
357 | config FB_AMIGA_ECS | |
358 | bool "Amiga ECS chipset support" | |
359 | depends on FB_AMIGA | |
360 | help | |
361 | This enables support for the Enhanced Chip Set, found in later | |
362 | A500's, later A2000's, the A600, the A3000, the A3000T and CDTV. If | |
363 | you intend to run Linux on any of these systems, say Y; otherwise | |
364 | say N. | |
365 | ||
366 | config FB_AMIGA_AGA | |
367 | bool "Amiga AGA chipset support" | |
368 | depends on FB_AMIGA | |
369 | help | |
370 | This enables support for the Advanced Graphics Architecture (also | |
371 | known as the AGA or AA) Chip Set, found in the A1200, A4000, A4000T | |
372 | and CD32. If you intend to run Linux on any of these systems, say Y; | |
373 | otherwise say N. | |
374 | ||
1da177e4 LT |
375 | config FB_FM2 |
376 | bool "Amiga FrameMaster II/Rainbow II support" | |
377 | depends on (FB = y) && ZORRO | |
378 | select FB_CFB_FILLRECT | |
379 | select FB_CFB_COPYAREA | |
380 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
381 | help |
382 | This is the frame buffer device driver for the Amiga FrameMaster | |
383 | card from BSC (exhibited 1992 but not shipped as a CBM product). | |
384 | ||
1154ea7d JK |
385 | config FB_ARC |
386 | tristate "Arc Monochrome LCD board support" | |
387 | depends on FB && X86 | |
388 | select FB_CFB_FILLRECT | |
389 | select FB_CFB_COPYAREA | |
390 | select FB_CFB_IMAGEBLIT | |
1154ea7d JK |
391 | help |
392 | This enables support for the Arc Monochrome LCD board. The board | |
393 | is based on the KS-108 lcd controller and is typically a matrix | |
394 | of 2*n chips. This driver was tested with a 128x64 panel. This | |
395 | driver supports it for use with x86 SBCs through a 16 bit GPIO | |
09509603 | 396 | interface (8 bit data, 8 bit control). If you anticipate using |
1154ea7d JK |
397 | this driver, say Y or M; otherwise say N. You must specify the |
398 | GPIO IO address to be used for setting control and data. | |
399 | ||
1da177e4 LT |
400 | config FB_ATARI |
401 | bool "Atari native chipset support" | |
a1005012 MS |
402 | depends on (FB = y) && ATARI |
403 | select FB_CFB_FILLRECT | |
404 | select FB_CFB_COPYAREA | |
405 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
406 | help |
407 | This is the frame buffer device driver for the builtin graphics | |
408 | chipset found in Ataris. | |
409 | ||
410 | config FB_OF | |
411 | bool "Open Firmware frame buffer device support" | |
bed59275 | 412 | depends on (FB = y) && (PPC64 || PPC_OF) && (!PPC_PSERIES || PCI) |
1da177e4 LT |
413 | select FB_CFB_FILLRECT |
414 | select FB_CFB_COPYAREA | |
415 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
416 | select FB_MACMODES |
417 | help | |
418 | Say Y if you want support with Open Firmware for your graphics | |
419 | board. | |
420 | ||
421 | config FB_CONTROL | |
422 | bool "Apple \"control\" display support" | |
a04b61d3 | 423 | depends on (FB = y) && PPC_PMAC && PPC32 |
1da177e4 LT |
424 | select FB_CFB_FILLRECT |
425 | select FB_CFB_COPYAREA | |
426 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
427 | select FB_MACMODES |
428 | help | |
429 | This driver supports a frame buffer for the graphics adapter in the | |
430 | Power Macintosh 7300 and others. | |
431 | ||
432 | config FB_PLATINUM | |
433 | bool "Apple \"platinum\" display support" | |
a04b61d3 | 434 | depends on (FB = y) && PPC_PMAC && PPC32 |
1da177e4 LT |
435 | select FB_CFB_FILLRECT |
436 | select FB_CFB_COPYAREA | |
437 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
438 | select FB_MACMODES |
439 | help | |
440 | This driver supports a frame buffer for the "platinum" graphics | |
441 | adapter in some Power Macintoshes. | |
442 | ||
443 | config FB_VALKYRIE | |
444 | bool "Apple \"valkyrie\" display support" | |
a04b61d3 | 445 | depends on (FB = y) && (MAC || (PPC_PMAC && PPC32)) |
1da177e4 LT |
446 | select FB_CFB_FILLRECT |
447 | select FB_CFB_COPYAREA | |
448 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
449 | select FB_MACMODES |
450 | help | |
451 | This driver supports a frame buffer for the "valkyrie" graphics | |
452 | adapter in some Power Macintoshes. | |
453 | ||
454 | config FB_CT65550 | |
455 | bool "Chips 65550 display support" | |
a04b61d3 | 456 | depends on (FB = y) && PPC32 |
1da177e4 LT |
457 | select FB_CFB_FILLRECT |
458 | select FB_CFB_COPYAREA | |
459 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
460 | help |
461 | This is the frame buffer device driver for the Chips & Technologies | |
462 | 65550 graphics chip in PowerBooks. | |
463 | ||
464 | config FB_ASILIANT | |
e65c0850 | 465 | bool "Asiliant (Chips) 69000 display support" |
1da177e4 LT |
466 | depends on (FB = y) && PCI |
467 | select FB_CFB_FILLRECT | |
468 | select FB_CFB_COPYAREA | |
469 | select FB_CFB_IMAGEBLIT | |
4de0b1ee AD |
470 | help |
471 | This is the frame buffer device driver for the Asiliant 69030 chipset | |
1da177e4 LT |
472 | |
473 | config FB_IMSTT | |
474 | bool "IMS Twin Turbo display support" | |
475 | depends on (FB = y) && PCI | |
476 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
477 | select FB_MACMODES if PPC |
478 | help | |
479 | The IMS Twin Turbo is a PCI-based frame buffer card bundled with | |
480 | many Macintosh and compatible computers. | |
481 | ||
1da177e4 LT |
482 | config FB_VGA16 |
483 | tristate "VGA 16-color graphics support" | |
484 | depends on FB && (X86 || PPC) | |
485 | select FB_CFB_FILLRECT | |
486 | select FB_CFB_COPYAREA | |
487 | select FB_CFB_IMAGEBLIT | |
b2f594fd | 488 | select VGASTATE |
1da177e4 LT |
489 | help |
490 | This is the frame buffer device driver for VGA 16 color graphic | |
491 | cards. Say Y if you have such a card. | |
492 | ||
493 | To compile this driver as a module, choose M here: the | |
494 | module will be called vga16fb. | |
495 | ||
496 | config FB_STI | |
497 | tristate "HP STI frame buffer device support" | |
498 | depends on FB && PARISC | |
499 | select FB_CFB_FILLRECT | |
500 | select FB_CFB_COPYAREA | |
501 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
502 | default y |
503 | ---help--- | |
504 | STI refers to the HP "Standard Text Interface" which is a set of | |
505 | BIOS routines contained in a ROM chip in HP PA-RISC based machines. | |
506 | Enabling this option will implement the linux framebuffer device | |
507 | using calls to the STI BIOS routines for initialisation. | |
508 | ||
509 | If you enable this option, you will get a planar framebuffer device | |
510 | /dev/fb which will work on the most common HP graphic cards of the | |
511 | NGLE family, including the artist chips (in the 7xx and Bxxx series), | |
512 | HCRX, HCRX24, CRX, CRX24 and VisEG series. | |
513 | ||
514 | It is safe to enable this option, so you should probably say "Y". | |
515 | ||
516 | config FB_MAC | |
517 | bool "Generic Macintosh display support" | |
518 | depends on (FB = y) && MAC | |
519 | select FB_CFB_FILLRECT | |
520 | select FB_CFB_COPYAREA | |
521 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
522 | select FB_MACMODES |
523 | ||
524 | # bool ' Apple DAFB display support' CONFIG_FB_DAFB | |
525 | config FB_HP300 | |
526 | bool | |
527 | depends on (FB = y) && HP300 | |
528 | select FB_CFB_FILLRECT | |
529 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
530 | default y |
531 | ||
532 | config FB_TGA | |
86c6f7d0 MR |
533 | tristate "TGA/SFB+ framebuffer support" |
534 | depends on FB && (ALPHA || TC) | |
1da177e4 LT |
535 | select FB_CFB_FILLRECT |
536 | select FB_CFB_COPYAREA | |
537 | select FB_CFB_IMAGEBLIT | |
1c667682 | 538 | select BITREVERSE |
86c6f7d0 MR |
539 | ---help--- |
540 | This is the frame buffer device driver for generic TGA and SFB+ | |
541 | graphic cards. These include DEC ZLXp-E1, -E2 and -E3 PCI cards, | |
542 | also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3 | |
543 | TURBOchannel cards, also known as PMAGD-A, -B and -C. | |
544 | ||
545 | Due to hardware limitations ZLX-E2 and E3 cards are not supported | |
546 | for DECstation 5000/200 systems. Additionally due to firmware | |
547 | limitations these cards may cause troubles with booting DECstation | |
548 | 5000/240 and /260 systems, but are fully supported under Linux if | |
549 | you manage to get it going. ;-) | |
550 | ||
551 | Say Y if you have one of those. | |
1da177e4 LT |
552 | |
553 | config FB_VESA | |
554 | bool "VESA VGA graphics support" | |
0d078f6f | 555 | depends on (FB = y) && X86 |
1da177e4 LT |
556 | select FB_CFB_FILLRECT |
557 | select FB_CFB_COPYAREA | |
558 | select FB_CFB_IMAGEBLIT | |
c9b2ec4d | 559 | select VIDEO_SELECT |
1da177e4 LT |
560 | help |
561 | This is the frame buffer device driver for generic VESA 2.0 | |
562 | compliant graphic cards. The older VESA 1.2 cards are not supported. | |
563 | You will get a boot time penguin logo at no additional cost. Please | |
564 | read <file:Documentation/fb/vesafb.txt>. If unsure, say Y. | |
565 | ||
90b4f9ac EH |
566 | config FB_IMAC |
567 | bool "Intel-based Macintosh Framebuffer Support" | |
b64ef8af | 568 | depends on (FB = y) && X86 && EFI |
90b4f9ac EH |
569 | select FB_CFB_FILLRECT |
570 | select FB_CFB_COPYAREA | |
571 | select FB_CFB_IMAGEBLIT | |
572 | help | |
573 | This is the frame buffer device driver for the Intel-based Macintosh | |
574 | ||
aad09e51 JK |
575 | config FB_HECUBA |
576 | tristate "Hecuba board support" | |
577 | depends on FB && X86 && MMU | |
578 | select FB_CFB_FILLRECT | |
579 | select FB_CFB_COPYAREA | |
580 | select FB_CFB_IMAGEBLIT | |
581 | select FB_DEFERRED_IO | |
582 | help | |
583 | This enables support for the Hecuba board. This driver was tested | |
584 | with an E-Ink 800x600 display and x86 SBCs through a 16 bit GPIO | |
585 | interface (8 bit data, 4 bit control). If you anticpate using | |
586 | this driver, say Y or M; otherwise say N. You must specify the | |
587 | GPIO IO address to be used for setting control and data. | |
588 | ||
1da177e4 LT |
589 | config FB_HGA |
590 | tristate "Hercules mono graphics support" | |
591 | depends on FB && X86 | |
592 | select FB_CFB_FILLRECT | |
593 | select FB_CFB_COPYAREA | |
594 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
595 | help |
596 | Say Y here if you have a Hercules mono graphics card. | |
597 | ||
598 | To compile this driver as a module, choose M here: the | |
599 | module will be called hgafb. | |
600 | ||
601 | As this card technology is 15 years old, most people will answer N | |
602 | here. | |
603 | ||
604 | config FB_HGA_ACCEL | |
605 | bool "Hercules mono Acceleration functions (EXPERIMENTAL)" | |
606 | depends on FB_HGA && EXPERIMENTAL | |
607 | ---help--- | |
608 | This will compile the Hercules mono graphics with | |
609 | acceleration functions. | |
610 | ||
1da177e4 LT |
611 | config FB_SGIVW |
612 | tristate "SGI Visual Workstation framebuffer support" | |
613 | depends on FB && X86_VISWS | |
614 | select FB_CFB_FILLRECT | |
615 | select FB_CFB_COPYAREA | |
616 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
617 | help |
618 | SGI Visual Workstation support for framebuffer graphics. | |
619 | ||
620 | config FB_GBE | |
621 | bool "SGI Graphics Backend frame buffer support" | |
622 | depends on (FB = y) && (SGI_IP32 || X86_VISWS) | |
623 | select FB_CFB_FILLRECT | |
624 | select FB_CFB_COPYAREA | |
625 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
626 | help |
627 | This is the frame buffer device driver for SGI Graphics Backend. | |
628 | This chip is used in SGI O2 and Visual Workstation 320/540. | |
629 | ||
630 | config FB_GBE_MEM | |
631 | int "Video memory size in MB" | |
632 | depends on FB_GBE | |
80c410dc | 633 | default 4 |
1da177e4 LT |
634 | help |
635 | This is the amount of memory reserved for the framebuffer, | |
636 | which can be any value between 1MB and 8MB. | |
637 | ||
1a571986 MF |
638 | config FB_SBUS |
639 | bool "SBUS and UPA framebuffers" | |
0b57ee9e | 640 | depends on (FB = y) && SPARC |
1a571986 MF |
641 | help |
642 | Say Y if you want support for SBUS or UPA based frame buffer device. | |
643 | ||
1da177e4 LT |
644 | config FB_BW2 |
645 | bool "BWtwo support" | |
e019630e | 646 | depends on (FB = y) && (SPARC && FB_SBUS) |
1da177e4 LT |
647 | select FB_CFB_FILLRECT |
648 | select FB_CFB_COPYAREA | |
649 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
650 | help |
651 | This is the frame buffer device driver for the BWtwo frame buffer. | |
652 | ||
653 | config FB_CG3 | |
654 | bool "CGthree support" | |
e019630e | 655 | depends on (FB = y) && (SPARC && FB_SBUS) |
1a571986 | 656 | select FB_CFB_FILLRECT |
1da177e4 LT |
657 | select FB_CFB_COPYAREA |
658 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
659 | help |
660 | This is the frame buffer device driver for the CGthree frame buffer. | |
661 | ||
662 | config FB_CG6 | |
663 | bool "CGsix (GX,TurboGX) support" | |
e019630e | 664 | depends on (FB = y) && (SPARC && FB_SBUS) |
1da177e4 LT |
665 | select FB_CFB_COPYAREA |
666 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
667 | help |
668 | This is the frame buffer device driver for the CGsix (GX, TurboGX) | |
669 | frame buffer. | |
670 | ||
671 | config FB_PVR2 | |
672 | tristate "NEC PowerVR 2 display support" | |
673 | depends on FB && SH_DREAMCAST | |
674 | select FB_CFB_FILLRECT | |
675 | select FB_CFB_COPYAREA | |
676 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
677 | ---help--- |
678 | Say Y here if you have a PowerVR 2 card in your box. If you plan to | |
679 | run linux on your Dreamcast, you will have to say Y here. | |
680 | This driver may or may not work on other PowerVR 2 cards, but is | |
681 | totally untested. Use at your own risk. If unsure, say N. | |
682 | ||
683 | To compile this driver as a module, choose M here: the | |
684 | module will be called pvr2fb. | |
685 | ||
686 | You can pass several parameters to the driver at boot time or at | |
687 | module load time. The parameters look like "video=pvr2:XXX", where | |
688 | the meaning of XXX can be found at the end of the main source file | |
689 | (<file:drivers/video/pvr2fb.c>). Please see the file | |
690 | <file:Documentation/fb/pvr2fb.txt>. | |
691 | ||
692 | config FB_EPSON1355 | |
693 | bool "Epson 1355 framebuffer support" | |
694 | depends on (FB = y) && (SUPERH || ARCH_CEIVA) | |
695 | select FB_CFB_FILLRECT | |
696 | select FB_CFB_COPYAREA | |
697 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
698 | help |
699 | Build in support for the SED1355 Epson Research Embedded RAMDAC | |
700 | LCD/CRT Controller (since redesignated as the S1D13505) as a | |
701 | framebuffer. Product specs at | |
702 | <http://www.erd.epson.com/vdc/html/products.htm>. | |
703 | ||
ecc41d5e RD |
704 | config FB_S1D13XXX |
705 | tristate "Epson S1D13XXX framebuffer support" | |
706 | depends on FB | |
707 | select FB_CFB_FILLRECT | |
708 | select FB_CFB_COPYAREA | |
709 | select FB_CFB_IMAGEBLIT | |
ecc41d5e RD |
710 | help |
711 | Support for S1D13XXX framebuffer device family (currently only | |
712 | working with S1D13806). Product specs at | |
713 | <http://www.erd.epson.com/vdc/html/legacy_13xxx.htm> | |
714 | ||
1da177e4 LT |
715 | config FB_NVIDIA |
716 | tristate "nVidia Framebuffer Support" | |
717 | depends on FB && PCI | |
e0e34ef7 | 718 | select FB_BACKLIGHT if FB_NVIDIA_BACKLIGHT |
1da177e4 LT |
719 | select FB_MODE_HELPERS |
720 | select FB_CFB_FILLRECT | |
721 | select FB_CFB_COPYAREA | |
722 | select FB_CFB_IMAGEBLIT | |
1c667682 | 723 | select BITREVERSE |
b2f594fd | 724 | select VGASTATE |
1da177e4 LT |
725 | help |
726 | This driver supports graphics boards with the nVidia chips, TNT | |
727 | and newer. For very old chipsets, such as the RIVA128, then use | |
728 | the rivafb. | |
729 | Say Y if you have such a graphics board. | |
730 | ||
731 | To compile this driver as a module, choose M here: the | |
732 | module will be called nvidiafb. | |
733 | ||
734 | config FB_NVIDIA_I2C | |
735 | bool "Enable DDC Support" | |
85f1503a | 736 | depends on FB_NVIDIA |
166f60dd | 737 | select FB_DDC |
1da177e4 LT |
738 | help |
739 | This enables I2C support for nVidia Chipsets. This is used | |
740 | only for getting EDID information from the attached display | |
741 | allowing for robust video mode handling and switching. | |
742 | ||
743 | Because fbdev-2.6 requires that drivers must be able to | |
744 | independently validate video mode parameters, you should say Y | |
745 | here. | |
746 | ||
5474c120 MH |
747 | config FB_NVIDIA_BACKLIGHT |
748 | bool "Support for backlight control" | |
e0e34ef7 | 749 | depends on FB_NVIDIA |
5474c120 MH |
750 | default y |
751 | help | |
752 | Say Y here if you want to control the backlight of your display. | |
753 | ||
1da177e4 LT |
754 | config FB_RIVA |
755 | tristate "nVidia Riva support" | |
756 | depends on FB && PCI | |
e0e34ef7 | 757 | select FB_BACKLIGHT if FB_RIVA_BACKLIGHT |
1da177e4 LT |
758 | select FB_MODE_HELPERS |
759 | select FB_CFB_FILLRECT | |
760 | select FB_CFB_COPYAREA | |
761 | select FB_CFB_IMAGEBLIT | |
1c667682 | 762 | select BITREVERSE |
b2f594fd | 763 | select VGASTATE |
1da177e4 LT |
764 | help |
765 | This driver supports graphics boards with the nVidia Riva/Geforce | |
766 | chips. | |
767 | Say Y if you have such a graphics board. | |
768 | ||
769 | To compile this driver as a module, choose M here: the | |
770 | module will be called rivafb. | |
771 | ||
772 | config FB_RIVA_I2C | |
773 | bool "Enable DDC Support" | |
774 | depends on FB_RIVA | |
166f60dd | 775 | select FB_DDC |
1da177e4 LT |
776 | help |
777 | This enables I2C support for nVidia Chipsets. This is used | |
778 | only for getting EDID information from the attached display | |
779 | allowing for robust video mode handling and switching. | |
780 | ||
781 | Because fbdev-2.6 requires that drivers must be able to | |
782 | independently validate video mode parameters, you should say Y | |
783 | here. | |
784 | ||
785 | config FB_RIVA_DEBUG | |
786 | bool "Lots of debug output from Riva(nVidia) driver" | |
787 | depends on FB_RIVA | |
788 | default n | |
789 | help | |
790 | Say Y here if you want the Riva driver to output all sorts | |
09509603 | 791 | of debugging information to provide to the maintainer when |
1da177e4 LT |
792 | something goes wrong. |
793 | ||
5474c120 MH |
794 | config FB_RIVA_BACKLIGHT |
795 | bool "Support for backlight control" | |
e0e34ef7 | 796 | depends on FB_RIVA |
5474c120 MH |
797 | default y |
798 | help | |
799 | Say Y here if you want to control the backlight of your display. | |
800 | ||
1da177e4 LT |
801 | config FB_I810 |
802 | tristate "Intel 810/815 support (EXPERIMENTAL)" | |
0d078f6f | 803 | depends on FB && EXPERIMENTAL && PCI && X86_32 |
1da177e4 LT |
804 | select AGP |
805 | select AGP_INTEL | |
806 | select FB_MODE_HELPERS | |
807 | select FB_CFB_FILLRECT | |
808 | select FB_CFB_COPYAREA | |
809 | select FB_CFB_IMAGEBLIT | |
b2f594fd | 810 | select VGASTATE |
1da177e4 LT |
811 | help |
812 | This driver supports the on-board graphics built in to the Intel 810 | |
813 | and 815 chipsets. Say Y if you have and plan to use such a board. | |
814 | ||
815 | To compile this driver as a module, choose M here: the | |
816 | module will be called i810fb. | |
817 | ||
818 | For more information, please read | |
819 | <file:Documentation/fb/intel810.txt> | |
820 | ||
821 | config FB_I810_GTF | |
822 | bool "use VESA Generalized Timing Formula" | |
823 | depends on FB_I810 | |
824 | help | |
825 | If you say Y, then the VESA standard, Generalized Timing Formula | |
826 | or GTF, will be used to calculate the required video timing values | |
827 | per video mode. Since the GTF allows nondiscrete timings | |
828 | (nondiscrete being a range of values as opposed to discrete being a | |
829 | set of values), you'll be able to use any combination of horizontal | |
830 | and vertical resolutions, and vertical refresh rates without having | |
831 | to specify your own timing parameters. This is especially useful | |
832 | to maximize the performance of an aging display, or if you just | |
833 | have a display with nonstandard dimensions. A VESA compliant | |
834 | monitor is recommended, but can still work with non-compliant ones. | |
835 | If you need or want this, then select this option. The timings may | |
836 | not be compliant with Intel's recommended values. Use at your own | |
837 | risk. | |
838 | ||
839 | If you say N, the driver will revert to discrete video timings | |
840 | using a set recommended by Intel in their documentation. | |
841 | ||
842 | If unsure, say N. | |
843 | ||
74f6ae84 AD |
844 | config FB_I810_I2C |
845 | bool "Enable DDC Support" | |
db84502b | 846 | depends on FB_I810 && FB_I810_GTF |
e80987f8 | 847 | select FB_DDC |
74f6ae84 AD |
848 | help |
849 | ||
1da177e4 | 850 | config FB_INTEL |
d463d34e | 851 | tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G support (EXPERIMENTAL)" |
0c187add | 852 | depends on FB && EXPERIMENTAL && PCI && X86 |
1da177e4 LT |
853 | select AGP |
854 | select AGP_INTEL | |
855 | select FB_MODE_HELPERS | |
856 | select FB_CFB_FILLRECT | |
857 | select FB_CFB_COPYAREA | |
858 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
859 | help |
860 | This driver supports the on-board graphics built in to the Intel | |
d463d34e | 861 | 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets. |
1da177e4 LT |
862 | Say Y if you have and plan to use such a board. |
863 | ||
1f6e8449 DM |
864 | If you say Y here and want DDC/I2C support you must first say Y to |
865 | "I2C support" and "I2C bit-banging support" in the character devices | |
866 | section. | |
867 | ||
868 | If you say M here then "I2C support" and "I2C bit-banging support" | |
869 | can be build either as modules or built-in. | |
870 | ||
871 | To compile this driver as a module, choose M here: the | |
1da177e4 LT |
872 | module will be called intelfb. |
873 | ||
d463d34e CM |
874 | For more information, please read <file:Documentation/fb/intelfb.txt> |
875 | ||
1da177e4 | 876 | config FB_INTEL_DEBUG |
1f6e8449 | 877 | bool "Intel driver Debug Messages" |
1da177e4 LT |
878 | depends on FB_INTEL |
879 | ---help--- | |
880 | Say Y here if you want the Intel driver to output all sorts | |
09509603 | 881 | of debugging information to provide to the maintainer when |
1da177e4 LT |
882 | something goes wrong. |
883 | ||
1f6e8449 DM |
884 | config FB_INTEL_I2C |
885 | bool "DDC/I2C for Intel framebuffer support" | |
886 | depends on FB_INTEL | |
166f60dd | 887 | select FB_DDC |
1f6e8449 DM |
888 | default y |
889 | help | |
890 | Say Y here if you want DDC/I2C support for your on-board Intel graphics. | |
891 | ||
1da177e4 LT |
892 | config FB_MATROX |
893 | tristate "Matrox acceleration" | |
894 | depends on FB && PCI | |
895 | select FB_CFB_FILLRECT | |
896 | select FB_CFB_COPYAREA | |
897 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
898 | select FB_TILEBLITTING |
899 | select FB_MACMODES if PPC_PMAC | |
900 | ---help--- | |
901 | Say Y here if you have a Matrox Millennium, Matrox Millennium II, | |
902 | Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox | |
903 | Mystique G200, Matrox Millennium G200, Matrox Marvel G200 video, | |
904 | Matrox G400, G450 or G550 card in your box. | |
905 | ||
906 | To compile this driver as a module, choose M here: the | |
907 | module will be called matroxfb. | |
908 | ||
909 | You can pass several parameters to the driver at boot time or at | |
910 | module load time. The parameters look like "video=matrox:XXX", and | |
911 | are described in <file:Documentation/fb/matroxfb.txt>. | |
912 | ||
913 | config FB_MATROX_MILLENIUM | |
914 | bool "Millennium I/II support" | |
915 | depends on FB_MATROX | |
916 | help | |
917 | Say Y here if you have a Matrox Millennium or Matrox Millennium II | |
918 | video card. If you select "Advanced lowlevel driver options" below, | |
919 | you should check 4 bpp packed pixel, 8 bpp packed pixel, 16 bpp | |
920 | packed pixel, 24 bpp packed pixel and 32 bpp packed pixel. You can | |
921 | also use font widths different from 8. | |
922 | ||
923 | config FB_MATROX_MYSTIQUE | |
924 | bool "Mystique support" | |
925 | depends on FB_MATROX | |
926 | help | |
927 | Say Y here if you have a Matrox Mystique or Matrox Mystique 220 | |
928 | video card. If you select "Advanced lowlevel driver options" below, | |
929 | you should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp | |
930 | packed pixel and 32 bpp packed pixel. You can also use font widths | |
931 | different from 8. | |
932 | ||
933 | config FB_MATROX_G | |
934 | bool "G100/G200/G400/G450/G550 support" | |
935 | depends on FB_MATROX | |
936 | ---help--- | |
937 | Say Y here if you have a Matrox G100, G200, G400, G450 or G550 based | |
938 | video card. If you select "Advanced lowlevel driver options", you | |
939 | should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp packed | |
940 | pixel and 32 bpp packed pixel. You can also use font widths | |
941 | different from 8. | |
942 | ||
943 | If you need support for G400 secondary head, you must first say Y to | |
944 | "I2C support" in the character devices section, and then to | |
945 | "Matrox I2C support" and "G400 second head support" here in the | |
946 | framebuffer section. G450/G550 secondary head and digital output | |
947 | are supported without additional modules. | |
948 | ||
949 | The driver starts in monitor mode. You must use the matroxset tool | |
950 | (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to | |
951 | swap primary and secondary head outputs, or to change output mode. | |
952 | Secondary head driver always start in 640x480 resolution and you | |
953 | must use fbset to change it. | |
954 | ||
955 | Do not forget that second head supports only 16 and 32 bpp | |
956 | packed pixels, so it is a good idea to compile them into the kernel | |
957 | too. You can use only some font widths, as the driver uses generic | |
958 | painting procedures (the secondary head does not use acceleration | |
959 | engine). | |
960 | ||
961 | G450/G550 hardware can display TV picture only from secondary CRTC, | |
962 | and it performs no scaling, so picture must have 525 or 625 lines. | |
963 | ||
964 | config FB_MATROX_I2C | |
965 | tristate "Matrox I2C support" | |
166f60dd JS |
966 | depends on FB_MATROX |
967 | select FB_DDC | |
1da177e4 LT |
968 | ---help--- |
969 | This drivers creates I2C buses which are needed for accessing the | |
970 | DDC (I2C) bus present on all Matroxes, an I2C bus which | |
971 | interconnects Matrox optional devices, like MGA-TVO on G200 and | |
972 | G400, and the secondary head DDC bus, present on G400 only. | |
973 | ||
974 | You can say Y or M here if you want to experiment with monitor | |
975 | detection code. You must say Y or M here if you want to use either | |
976 | second head of G400 or MGA-TVO on G200 or G400. | |
977 | ||
978 | If you compile it as module, it will create a module named | |
979 | i2c-matroxfb. | |
980 | ||
981 | config FB_MATROX_MAVEN | |
982 | tristate "G400 second head support" | |
983 | depends on FB_MATROX_G && FB_MATROX_I2C | |
984 | ---help--- | |
985 | WARNING !!! This support does not work with G450 !!! | |
986 | ||
987 | Say Y or M here if you want to use a secondary head (meaning two | |
988 | monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary | |
989 | head is not compatible with accelerated XFree 3.3.x SVGA servers - | |
990 | secondary head output is blanked while you are in X. With XFree | |
991 | 3.9.17 preview you can use both heads if you use SVGA over fbdev or | |
992 | the fbdev driver on first head and the fbdev driver on second head. | |
993 | ||
994 | If you compile it as module, two modules are created, | |
995 | matroxfb_crtc2 and matroxfb_maven. Matroxfb_maven is needed for | |
996 | both G200 and G400, matroxfb_crtc2 is needed only by G400. You must | |
997 | also load i2c-matroxfb to get it to run. | |
998 | ||
999 | The driver starts in monitor mode and you must use the matroxset | |
1000 | tool (available at | |
1001 | <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to | |
1002 | PAL or NTSC or to swap primary and secondary head outputs. | |
1003 | Secondary head driver also always start in 640x480 resolution, you | |
1004 | must use fbset to change it. | |
1005 | ||
1006 | Also do not forget that second head supports only 16 and 32 bpp | |
1007 | packed pixels, so it is a good idea to compile them into the kernel | |
1008 | too. You can use only some font widths, as the driver uses generic | |
1009 | painting procedures (the secondary head does not use acceleration | |
1010 | engine). | |
1011 | ||
1012 | config FB_MATROX_MULTIHEAD | |
1013 | bool "Multihead support" | |
1014 | depends on FB_MATROX | |
1015 | ---help--- | |
1016 | Say Y here if you have more than one (supported) Matrox device in | |
1017 | your computer and you want to use all of them for different monitors | |
1018 | ("multihead"). If you have only one device, you should say N because | |
1019 | the driver compiled with Y is larger and a bit slower, especially on | |
1020 | ia32 (ix86). | |
1021 | ||
1022 | If you said M to "Matrox unified accelerated driver" and N here, you | |
1023 | will still be able to use several Matrox devices simultaneously: | |
1024 | insert several instances of the module matroxfb into the kernel | |
1025 | with insmod, supplying the parameter "dev=N" where N is 0, 1, etc. | |
1026 | for the different Matrox devices. This method is slightly faster but | |
1027 | uses 40 KB of kernel memory per Matrox card. | |
1028 | ||
1029 | There is no need for enabling 'Matrox multihead support' if you have | |
1030 | only one Matrox card in the box. | |
1031 | ||
1da177e4 LT |
1032 | config FB_RADEON |
1033 | tristate "ATI Radeon display support" | |
1034 | depends on FB && PCI | |
e0e34ef7 | 1035 | select FB_BACKLIGHT if FB_RADEON_BACKLIGHT |
1da177e4 LT |
1036 | select FB_MODE_HELPERS |
1037 | select FB_CFB_FILLRECT | |
1038 | select FB_CFB_COPYAREA | |
1039 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1040 | select FB_MACMODES if PPC_OF |
1041 | help | |
1042 | Choose this option if you want to use an ATI Radeon graphics card as | |
1043 | a framebuffer device. There are both PCI and AGP versions. You | |
1044 | don't need to choose this to run the Radeon in plain VGA mode. | |
1045 | ||
1046 | If you say Y here and want DDC/I2C support you must first say Y to | |
1047 | "I2C support" and "I2C bit-banging support" in the character devices | |
1048 | section. | |
1049 | ||
1050 | If you say M here then "I2C support" and "I2C bit-banging support" | |
1051 | can be build either as modules or built-in. | |
1052 | ||
1053 | There is a product page at | |
f510a3c3 | 1054 | http://apps.ati.com/ATIcompare/ |
5474c120 | 1055 | |
1da177e4 LT |
1056 | config FB_RADEON_I2C |
1057 | bool "DDC/I2C for ATI Radeon support" | |
1058 | depends on FB_RADEON | |
166f60dd | 1059 | select FB_DDC |
1da177e4 LT |
1060 | default y |
1061 | help | |
1062 | Say Y here if you want DDC/I2C support for your Radeon board. | |
1063 | ||
5474c120 MH |
1064 | config FB_RADEON_BACKLIGHT |
1065 | bool "Support for backlight control" | |
e0e34ef7 | 1066 | depends on FB_RADEON |
5474c120 MH |
1067 | default y |
1068 | help | |
1069 | Say Y here if you want to control the backlight of your display. | |
1070 | ||
1da177e4 LT |
1071 | config FB_RADEON_DEBUG |
1072 | bool "Lots of debug output from Radeon driver" | |
1073 | depends on FB_RADEON | |
1074 | default n | |
1075 | help | |
1076 | Say Y here if you want the Radeon driver to output all sorts | |
09509603 | 1077 | of debugging information to provide to the maintainer when |
1da177e4 LT |
1078 | something goes wrong. |
1079 | ||
1080 | config FB_ATY128 | |
1081 | tristate "ATI Rage128 display support" | |
1082 | depends on FB && PCI | |
1083 | select FB_CFB_FILLRECT | |
1084 | select FB_CFB_COPYAREA | |
1085 | select FB_CFB_IMAGEBLIT | |
e0e34ef7 | 1086 | select FB_BACKLIGHT if FB_ATY128_BACKLIGHT |
1da177e4 LT |
1087 | select FB_MACMODES if PPC_PMAC |
1088 | help | |
1089 | This driver supports graphics boards with the ATI Rage128 chips. | |
1090 | Say Y if you have such a graphics board and read | |
1091 | <file:Documentation/fb/aty128fb.txt>. | |
1092 | ||
1093 | To compile this driver as a module, choose M here: the | |
1094 | module will be called aty128fb. | |
1095 | ||
5474c120 MH |
1096 | config FB_ATY128_BACKLIGHT |
1097 | bool "Support for backlight control" | |
e0e34ef7 | 1098 | depends on FB_ATY128 |
5474c120 MH |
1099 | default y |
1100 | help | |
1101 | Say Y here if you want to control the backlight of your display. | |
1102 | ||
1da177e4 LT |
1103 | config FB_ATY |
1104 | tristate "ATI Mach64 display support" if PCI || ATARI | |
f2e782ef | 1105 | depends on FB && !SPARC32 |
1da177e4 LT |
1106 | select FB_CFB_FILLRECT |
1107 | select FB_CFB_COPYAREA | |
1108 | select FB_CFB_IMAGEBLIT | |
e0e34ef7 | 1109 | select FB_BACKLIGHT if FB_ATY_BACKLIGHT |
1da177e4 LT |
1110 | select FB_MACMODES if PPC |
1111 | help | |
1112 | This driver supports graphics boards with the ATI Mach64 chips. | |
1113 | Say Y if you have such a graphics board. | |
1114 | ||
1115 | To compile this driver as a module, choose M here: the | |
1116 | module will be called atyfb. | |
1117 | ||
1118 | config FB_ATY_CT | |
1119 | bool "Mach64 CT/VT/GT/LT (incl. 3D RAGE) support" | |
1120 | depends on PCI && FB_ATY | |
1121 | default y if SPARC64 && FB_PCI | |
1122 | help | |
1123 | Say Y here to support use of ATI's 64-bit Rage boards (or other | |
1124 | boards based on the Mach64 CT, VT, GT, and LT chipsets) as a | |
1125 | framebuffer device. The ATI product support page for these boards | |
1126 | is at <http://support.ati.com/products/pc/mach64/>. | |
1127 | ||
1128 | config FB_ATY_GENERIC_LCD | |
1129 | bool "Mach64 generic LCD support (EXPERIMENTAL)" | |
1130 | depends on FB_ATY_CT | |
1131 | help | |
1132 | Say Y if you have a laptop with an ATI Rage LT PRO, Rage Mobility, | |
1133 | Rage XC, or Rage XL chipset. | |
1134 | ||
1da177e4 LT |
1135 | config FB_ATY_GX |
1136 | bool "Mach64 GX support" if PCI | |
1137 | depends on FB_ATY | |
1138 | default y if ATARI | |
1139 | help | |
1140 | Say Y here to support use of the ATI Mach64 Graphics Expression | |
1141 | board (or other boards based on the Mach64 GX chipset) as a | |
1142 | framebuffer device. The ATI product support page for these boards | |
1143 | is at | |
1144 | <http://support.ati.com/products/pc/mach64/graphics_xpression.html>. | |
1145 | ||
5474c120 MH |
1146 | config FB_ATY_BACKLIGHT |
1147 | bool "Support for backlight control" | |
e0e34ef7 | 1148 | depends on FB_ATY |
5474c120 MH |
1149 | default y |
1150 | help | |
1151 | Say Y here if you want to control the backlight of your display. | |
1152 | ||
a268422d OZ |
1153 | config FB_S3 |
1154 | tristate "S3 Trio/Virge support" | |
1155 | depends on FB && PCI | |
1156 | select FB_CFB_FILLRECT | |
1157 | select FB_CFB_COPYAREA | |
1158 | select FB_CFB_IMAGEBLIT | |
1159 | select FB_TILEBLITTING | |
1160 | select FB_SVGALIB | |
b2f594fd | 1161 | select VGASTATE |
a268422d OZ |
1162 | ---help--- |
1163 | Driver for graphics boards with S3 Trio / S3 Virge chip. | |
1164 | ||
1da177e4 LT |
1165 | config FB_SAVAGE |
1166 | tristate "S3 Savage support" | |
1167 | depends on FB && PCI && EXPERIMENTAL | |
1da177e4 LT |
1168 | select FB_MODE_HELPERS |
1169 | select FB_CFB_FILLRECT | |
1170 | select FB_CFB_COPYAREA | |
1171 | select FB_CFB_IMAGEBLIT | |
b2f594fd | 1172 | select VGASTATE |
1da177e4 LT |
1173 | help |
1174 | This driver supports notebooks and computers with S3 Savage PCI/AGP | |
1175 | chips. | |
1176 | ||
1177 | Say Y if you have such a graphics card. | |
1178 | ||
1179 | To compile this driver as a module, choose M here; the module | |
1180 | will be called savagefb. | |
1181 | ||
1182 | config FB_SAVAGE_I2C | |
1183 | bool "Enable DDC2 Support" | |
1184 | depends on FB_SAVAGE | |
166f60dd | 1185 | select FB_DDC |
1da177e4 LT |
1186 | help |
1187 | This enables I2C support for S3 Savage Chipsets. This is used | |
1188 | only for getting EDID information from the attached display | |
1189 | allowing for robust video mode handling and switching. | |
1190 | ||
1191 | Because fbdev-2.6 requires that drivers must be able to | |
1192 | independently validate video mode parameters, you should say Y | |
1193 | here. | |
1194 | ||
1195 | config FB_SAVAGE_ACCEL | |
1196 | bool "Enable Console Acceleration" | |
1197 | depends on FB_SAVAGE | |
1198 | default n | |
1199 | help | |
1200 | This option will compile in console acceleration support. If | |
1201 | the resulting framebuffer console has bothersome glitches, then | |
1202 | choose N here. | |
1203 | ||
1204 | config FB_SIS | |
544393fe | 1205 | tristate "SiS/XGI display support" |
1da177e4 LT |
1206 | depends on FB && PCI |
1207 | select FB_CFB_FILLRECT | |
1208 | select FB_CFB_COPYAREA | |
1209 | select FB_CFB_IMAGEBLIT | |
1da177e4 | 1210 | help |
544393fe TW |
1211 | This is the frame buffer device driver for the SiS 300, 315, 330 |
1212 | and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets. | |
1213 | Specs available at <http://www.sis.com> and <http://www.xgitech.com>. | |
1da177e4 LT |
1214 | |
1215 | To compile this driver as a module, choose M here; the module | |
1216 | will be called sisfb. | |
1217 | ||
1218 | config FB_SIS_300 | |
1219 | bool "SiS 300 series support" | |
1220 | depends on FB_SIS | |
1221 | help | |
1222 | Say Y here to support use of the SiS 300/305, 540, 630 and 730. | |
1223 | ||
1224 | config FB_SIS_315 | |
544393fe | 1225 | bool "SiS 315/330/340 series and XGI support" |
1da177e4 LT |
1226 | depends on FB_SIS |
1227 | help | |
544393fe TW |
1228 | Say Y here to support use of the SiS 315, 330 and 340 series |
1229 | (315/H/PRO, 55x, 650, 651, 740, 330, 661, 741, 760, 761) as well | |
1230 | as XGI V3XT, V5, V8 and Z7. | |
1da177e4 LT |
1231 | |
1232 | config FB_NEOMAGIC | |
1233 | tristate "NeoMagic display support" | |
1234 | depends on FB && PCI | |
1235 | select FB_MODE_HELPERS | |
1236 | select FB_CFB_FILLRECT | |
1237 | select FB_CFB_COPYAREA | |
1238 | select FB_CFB_IMAGEBLIT | |
b2f594fd | 1239 | select VGASTATE |
1da177e4 LT |
1240 | help |
1241 | This driver supports notebooks with NeoMagic PCI chips. | |
1242 | Say Y if you have such a graphics card. | |
1243 | ||
1244 | To compile this driver as a module, choose M here: the | |
1245 | module will be called neofb. | |
1246 | ||
1247 | config FB_KYRO | |
1248 | tristate "IMG Kyro support" | |
1249 | depends on FB && PCI | |
1250 | select FB_CFB_FILLRECT | |
1251 | select FB_CFB_COPYAREA | |
1252 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1253 | help |
1254 | Say Y here if you have a STG4000 / Kyro / PowerVR 3 based | |
1255 | graphics board. | |
1256 | ||
1257 | To compile this driver as a module, choose M here: the | |
1258 | module will be called kyrofb. | |
1259 | ||
1260 | config FB_3DFX | |
1261 | tristate "3Dfx Banshee/Voodoo3 display support" | |
1262 | depends on FB && PCI | |
1263 | select FB_CFB_IMAGEBLIT | |
1264 | select FB_CFB_FILLRECT | |
1265 | select FB_CFB_COPYAREA | |
1da177e4 LT |
1266 | help |
1267 | This driver supports graphics boards with the 3Dfx Banshee/Voodoo3 | |
1268 | chips. Say Y if you have such a graphics board. | |
1269 | ||
1270 | To compile this driver as a module, choose M here: the | |
1271 | module will be called tdfxfb. | |
1272 | ||
1273 | config FB_3DFX_ACCEL | |
1274 | bool "3Dfx Banshee/Voodoo3 Acceleration functions (EXPERIMENTAL)" | |
1275 | depends on FB_3DFX && EXPERIMENTAL | |
1276 | ---help--- | |
1277 | This will compile the 3Dfx Banshee/Voodoo3 frame buffer device | |
1278 | with acceleration functions. | |
1279 | ||
1280 | ||
1281 | config FB_VOODOO1 | |
1282 | tristate "3Dfx Voodoo Graphics (sst1) support" | |
1283 | depends on FB && PCI | |
1284 | select FB_CFB_FILLRECT | |
1285 | select FB_CFB_COPYAREA | |
1286 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1287 | ---help--- |
1288 | Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or | |
1289 | Voodoo2 (cvg) based graphics card. | |
1290 | ||
1291 | To compile this driver as a module, choose M here: the | |
1292 | module will be called sstfb. | |
1293 | ||
1294 | WARNING: Do not use any application that uses the 3D engine | |
1295 | (namely glide) while using this driver. | |
1296 | Please read the <file:Documentation/fb/README-sstfb.txt> for supported | |
1297 | options and other important info support. | |
1298 | ||
9fa68eae KP |
1299 | config FB_CYBLA |
1300 | tristate "Cyberblade/i1 support" | |
44637a12 | 1301 | depends on FB && PCI && X86_32 && !64BIT |
9fa68eae | 1302 | select FB_CFB_IMAGEBLIT |
9fa68eae KP |
1303 | select VIDEO_SELECT |
1304 | ---help--- | |
1305 | This driver is supposed to support the Trident Cyberblade/i1 | |
1306 | graphics core integrated in the VIA VT8601A North Bridge, | |
1307 | also known as VIA Apollo PLE133. | |
1308 | ||
1309 | Status: | |
1310 | - Developed, tested and working on EPIA 5000 and EPIA 800. | |
1311 | - Does work reliable on all systems with CRT/LCD connected to | |
1312 | normal VGA ports. | |
1313 | - Should work on systems that do use the internal LCD port, but | |
1314 | this is absolutely not tested. | |
1315 | ||
1316 | Character imageblit, copyarea and rectangle fill are hw accelerated, | |
1317 | ypan scrolling is used by default. | |
1318 | ||
1319 | Please do read <file:Documentation/fb/cyblafb/*>. | |
1320 | ||
1321 | To compile this driver as a module, choose M here: the | |
1322 | module will be called cyblafb. | |
1323 | ||
1da177e4 LT |
1324 | config FB_TRIDENT |
1325 | tristate "Trident support" | |
1326 | depends on FB && PCI | |
1327 | select FB_CFB_FILLRECT | |
1328 | select FB_CFB_COPYAREA | |
1329 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1330 | ---help--- |
1331 | This driver is supposed to support graphics boards with the | |
1332 | Trident CyberXXXX/Image/CyberBlade chips mostly found in laptops | |
1333 | but also on some motherboards. For more information, read | |
1334 | <file:Documentation/fb/tridentfb.txt> | |
1335 | ||
9fa68eae KP |
1336 | Cyberblade/i1 support will be removed soon, use the cyblafb driver |
1337 | instead. | |
1338 | ||
1da177e4 LT |
1339 | Say Y if you have such a graphics board. |
1340 | ||
9fa68eae | 1341 | |
1da177e4 LT |
1342 | To compile this driver as a module, choose M here: the |
1343 | module will be called tridentfb. | |
1344 | ||
1345 | config FB_TRIDENT_ACCEL | |
1346 | bool "Trident Acceleration functions (EXPERIMENTAL)" | |
1347 | depends on FB_TRIDENT && EXPERIMENTAL | |
1348 | ---help--- | |
1349 | This will compile the Trident frame buffer device with | |
1350 | acceleration functions. | |
1351 | ||
1da177e4 LT |
1352 | config FB_PM3 |
1353 | tristate "Permedia3 support" | |
1354 | depends on FB && PCI && BROKEN | |
1355 | help | |
1356 | This is the frame buffer device driver for the 3DLabs Permedia3 | |
1357 | chipset, used in Formac ProFormance III, 3DLabs Oxygen VX1 & | |
1358 | similar boards, 3DLabs Permedia3 Create!, Appian Jeronimo 2000 | |
1359 | and maybe other boards. | |
1360 | ||
1da177e4 LT |
1361 | config FB_AU1100 |
1362 | bool "Au1100 LCD Driver" | |
1363 | depends on (FB = y) && EXPERIMENTAL && PCI && MIPS && MIPS_PB1100=y | |
1364 | ||
f95ec3c6 RB |
1365 | config FB_AU1200 |
1366 | bool "Au1200 LCD Driver" | |
833f8062 | 1367 | depends on (FB = y) && MIPS && SOC_AU1200 |
f95ec3c6 RB |
1368 | select FB_CFB_FILLRECT |
1369 | select FB_CFB_COPYAREA | |
1370 | select FB_CFB_IMAGEBLIT | |
1371 | help | |
1372 | This is the framebuffer driver for the AMD Au1200 SOC. It can drive | |
1373 | various panels and CRTs by passing in kernel cmd line option | |
1374 | au1200fb:panel=<name>. | |
1375 | ||
1da177e4 LT |
1376 | source "drivers/video/geode/Kconfig" |
1377 | ||
1da177e4 LT |
1378 | config FB_FFB |
1379 | bool "Creator/Creator3D/Elite3D support" | |
1380 | depends on FB_SBUS && SPARC64 | |
1381 | select FB_CFB_COPYAREA | |
1382 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1383 | help |
1384 | This is the frame buffer device driver for the Creator, Creator3D, | |
1385 | and Elite3D graphics boards. | |
1386 | ||
1387 | config FB_TCX | |
1388 | bool "TCX (SS4/SS5 only) support" | |
1389 | depends on FB_SBUS | |
1390 | select FB_CFB_FILLRECT | |
1391 | select FB_CFB_COPYAREA | |
1392 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1393 | help |
1394 | This is the frame buffer device driver for the TCX 24/8bit frame | |
1395 | buffer. | |
1396 | ||
1397 | config FB_CG14 | |
1398 | bool "CGfourteen (SX) support" | |
1399 | depends on FB_SBUS | |
1400 | select FB_CFB_FILLRECT | |
1401 | select FB_CFB_COPYAREA | |
1402 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1403 | help |
1404 | This is the frame buffer device driver for the CGfourteen frame | |
1405 | buffer on Desktop SPARCsystems with the SX graphics option. | |
1406 | ||
1407 | config FB_P9100 | |
1408 | bool "P9100 (Sparcbook 3 only) support" | |
1409 | depends on FB_SBUS | |
1410 | select FB_CFB_FILLRECT | |
1411 | select FB_CFB_COPYAREA | |
1412 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1413 | help |
1414 | This is the frame buffer device driver for the P9100 card | |
1415 | supported on Sparcbook 3 machines. | |
1416 | ||
1417 | config FB_LEO | |
1418 | bool "Leo (ZX) support" | |
1419 | depends on FB_SBUS | |
1420 | select FB_CFB_FILLRECT | |
1421 | select FB_CFB_COPYAREA | |
1422 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1423 | help |
1424 | This is the frame buffer device driver for the SBUS-based Sun ZX | |
1425 | (leo) frame buffer cards. | |
1426 | ||
453e93b3 DM |
1427 | config FB_XVR500 |
1428 | bool "Sun XVR-500 3DLABS Wildcat support" | |
1429 | depends on FB && PCI && SPARC64 | |
1430 | select FB_CFB_FILLRECT | |
1431 | select FB_CFB_COPYAREA | |
1432 | select FB_CFB_IMAGEBLIT | |
1433 | help | |
1434 | This is the framebuffer device for the Sun XVR-500 and similar | |
1435 | graphics cards based upon the 3DLABS Wildcat chipset. The driver | |
1436 | only works on sparc64 systems where the system firwmare has | |
1437 | mostly initialized the card already. It is treated as a | |
1438 | completely dumb framebuffer device. | |
1439 | ||
71227521 DM |
1440 | config FB_XVR2500 |
1441 | bool "Sun XVR-2500 3DLABS Wildcat support" | |
1442 | depends on FB && PCI && SPARC64 | |
1443 | select FB_CFB_FILLRECT | |
1444 | select FB_CFB_COPYAREA | |
1445 | select FB_CFB_IMAGEBLIT | |
1446 | help | |
1447 | This is the framebuffer device for the Sun XVR-2500 and similar | |
1448 | graphics cards based upon the 3DLABS Wildcat chipset. The driver | |
1449 | only works on sparc64 systems where the system firwmare has | |
1450 | mostly initialized the card already. It is treated as a | |
1451 | completely dumb framebuffer device. | |
1452 | ||
1da177e4 LT |
1453 | config FB_PCI |
1454 | bool "PCI framebuffers" | |
0b57ee9e | 1455 | depends on (FB = y) && PCI && SPARC |
1da177e4 LT |
1456 | |
1457 | config FB_IGA | |
1458 | bool "IGA 168x display support" | |
1459 | depends on SPARC32 && FB_PCI | |
1460 | select FB_CFB_FILLRECT | |
1461 | select FB_CFB_COPYAREA | |
1462 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1463 | help |
1464 | This is the framebuffer device for the INTERGRAPHICS 1680 and | |
1465 | successor frame buffer cards. | |
1466 | ||
1467 | config FB_HIT | |
1468 | tristate "HD64461 Frame Buffer support" | |
1469 | depends on FB && HD64461 | |
1470 | select FB_CFB_FILLRECT | |
1471 | select FB_CFB_COPYAREA | |
1472 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1473 | help |
1474 | This is the frame buffer device driver for the Hitachi HD64461 LCD | |
1475 | frame buffer card. | |
1476 | ||
1477 | config FB_PMAG_AA | |
1478 | bool "PMAG-AA TURBOchannel framebuffer support" | |
a9350003 | 1479 | depends on (FB = y) && TC |
1da177e4 LT |
1480 | select FB_CFB_FILLRECT |
1481 | select FB_CFB_COPYAREA | |
1482 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1483 | help |
1484 | Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1) | |
1485 | used mainly in the MIPS-based DECstation series. | |
1486 | ||
1487 | config FB_PMAG_BA | |
335dc50c MR |
1488 | tristate "PMAG-BA TURBOchannel framebuffer support" |
1489 | depends on FB && TC | |
1da177e4 LT |
1490 | select FB_CFB_FILLRECT |
1491 | select FB_CFB_COPYAREA | |
1492 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1493 | help |
1494 | Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8) | |
1495 | used mainly in the MIPS-based DECstation series. | |
1496 | ||
1497 | config FB_PMAGB_B | |
9084b005 MR |
1498 | tristate "PMAGB-B TURBOchannel framebuffer support" |
1499 | depends on TC | |
1da177e4 LT |
1500 | select FB_CFB_FILLRECT |
1501 | select FB_CFB_COPYAREA | |
1502 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1503 | help |
1504 | Support for the PMAGB-B TURBOchannel framebuffer card used mainly | |
1505 | in the MIPS-based DECstation series. The card is currently only | |
1506 | supported in 1280x1024x8 mode. | |
1507 | ||
1508 | config FB_MAXINE | |
1509 | bool "Maxine (Personal DECstation) onboard framebuffer support" | |
a9350003 | 1510 | depends on (FB = y) && MACH_DECSTATION |
1da177e4 LT |
1511 | select FB_CFB_FILLRECT |
1512 | select FB_CFB_COPYAREA | |
1513 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1514 | help |
1515 | Support for the onboard framebuffer (1024x768x8) in the Personal | |
1516 | DECstation series (Personal DECstation 5000/20, /25, /33, /50, | |
1517 | Codename "Maxine"). | |
1518 | ||
1519 | config FB_TX3912 | |
1520 | bool "TMPTX3912/PR31700 frame buffer support" | |
1521 | depends on (FB = y) && NINO | |
1522 | select FB_CFB_FILLRECT | |
1523 | select FB_CFB_COPYAREA | |
1524 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1525 | help |
1526 | The TX3912 is a Toshiba RISC processor based on the MIPS 3900 core | |
1527 | see <http://www.toshiba.com/taec/components/Generic/risc/tx3912.htm>. | |
1528 | ||
1529 | Say Y here to enable kernel support for the on-board framebuffer. | |
1530 | ||
1531 | config FB_G364 | |
b38817dd YY |
1532 | bool "G364 frame buffer support" |
1533 | depends on (FB = y) && (MIPS_MAGNUM_4000 || OLIVETTI_M700) | |
1da177e4 LT |
1534 | select FB_CFB_FILLRECT |
1535 | select FB_CFB_COPYAREA | |
1536 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1537 | help |
1538 | The G364 driver is the framebuffer used in MIPS Magnum 4000 and | |
1539 | Olivetti M700-10 systems. | |
1540 | ||
1541 | config FB_68328 | |
1542 | bool "Motorola 68328 native frame buffer support" | |
833f8062 | 1543 | depends on (FB = y) && (M68328 || M68EZ328 || M68VZ328) |
1da177e4 LT |
1544 | select FB_CFB_FILLRECT |
1545 | select FB_CFB_COPYAREA | |
1546 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1547 | help |
1548 | Say Y here if you want to support the built-in frame buffer of | |
1549 | the Motorola 68328 CPU family. | |
1550 | ||
1551 | config FB_PXA | |
1552 | tristate "PXA LCD framebuffer support" | |
1553 | depends on FB && ARCH_PXA | |
1554 | select FB_CFB_FILLRECT | |
1555 | select FB_CFB_COPYAREA | |
1556 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1557 | ---help--- |
1558 | Frame buffer driver for the built-in LCD controller in the Intel | |
1559 | PXA2x0 processor. | |
1560 | ||
1561 | This driver is also available as a module ( = code which can be | |
1562 | inserted and removed from the running kernel whenever you want). The | |
74b4f042 | 1563 | module will be called pxafb. If you want to compile it as a module, |
39f5fb30 | 1564 | say M here and read <file:Documentation/kbuild/modules.txt>. |
1da177e4 LT |
1565 | |
1566 | If unsure, say N. | |
1567 | ||
1da177e4 LT |
1568 | config FB_PXA_PARAMETERS |
1569 | bool "PXA LCD command line parameters" | |
1570 | default n | |
1571 | depends on FB_PXA | |
1572 | ---help--- | |
1573 | Enable the use of kernel command line or module parameters | |
1574 | to configure the physical properties of the LCD panel when | |
1575 | using the PXA LCD driver. | |
1576 | ||
1577 | This option allows you to override the panel parameters | |
1578 | supplied by the platform in order to support multiple | |
1579 | different models of flatpanel. If you will only be using a | |
1580 | single model of flatpanel then you can safely leave this | |
1581 | option disabled. | |
1582 | ||
1583 | <file:Documentation/fb/pxafb.txt> describes the available parameters. | |
1584 | ||
22caf042 MR |
1585 | config FB_MBX |
1586 | tristate "2700G LCD framebuffer support" | |
1587 | depends on FB && ARCH_PXA | |
1588 | select FB_CFB_FILLRECT | |
1589 | select FB_CFB_COPYAREA | |
1590 | select FB_CFB_IMAGEBLIT | |
1591 | ---help--- | |
1592 | Framebuffer driver for the Intel 2700G (Marathon) Graphics | |
1593 | Accelerator | |
1594 | ||
1595 | config FB_MBX_DEBUG | |
1596 | bool "Enable debugging info via debugfs" | |
1597 | depends on FB_MBX && DEBUG_FS | |
1598 | default n | |
1599 | ---help--- | |
1600 | Enable this if you want debugging information using the debug | |
1601 | filesystem (debugfs) | |
1602 | ||
1603 | If unsure, say N. | |
1604 | ||
ecc41d5e RD |
1605 | config FB_W100 |
1606 | tristate "W100 frame buffer support" | |
1607 | depends on FB && PXA_SHARPSL | |
1608 | select FB_CFB_FILLRECT | |
1609 | select FB_CFB_COPYAREA | |
1610 | select FB_CFB_IMAGEBLIT | |
ecc41d5e RD |
1611 | ---help--- |
1612 | Frame buffer driver for the w100 as found on the Sharp SL-Cxx series. | |
1613 | ||
1614 | This driver is also available as a module ( = code which can be | |
1615 | inserted and removed from the running kernel whenever you want). The | |
74b4f042 | 1616 | module will be called w100fb. If you want to compile it as a module, |
39f5fb30 | 1617 | say M here and read <file:Documentation/kbuild/modules.txt>. |
ecc41d5e RD |
1618 | |
1619 | If unsure, say N. | |
1da177e4 | 1620 | |
20fd5767 AP |
1621 | config FB_S3C2410 |
1622 | tristate "S3C2410 LCD framebuffer support" | |
1623 | depends on FB && ARCH_S3C2410 | |
1624 | select FB_CFB_FILLRECT | |
1625 | select FB_CFB_COPYAREA | |
1626 | select FB_CFB_IMAGEBLIT | |
20fd5767 AP |
1627 | ---help--- |
1628 | Frame buffer driver for the built-in LCD controller in the Samsung | |
1629 | S3C2410 processor. | |
1630 | ||
1631 | This driver is also available as a module ( = code which can be | |
1632 | inserted and removed from the running kernel whenever you want). The | |
1633 | module will be called s3c2410fb. If you want to compile it as a module, | |
39f5fb30 | 1634 | say M here and read <file:Documentation/kbuild/modules.txt>. |
20fd5767 AP |
1635 | |
1636 | If unsure, say N. | |
1637 | config FB_S3C2410_DEBUG | |
1638 | bool "S3C2410 lcd debug messages" | |
1639 | depends on FB_S3C2410 | |
1640 | help | |
1641 | Turn on debugging messages. Note that you can set/unset at run time | |
1642 | through sysfs | |
1643 | ||
5fc404e4 BD |
1644 | config FB_SM501 |
1645 | tristate "Silicon Motion SM501 framebuffer support" | |
1646 | depends on FB && MFD_SM501 | |
1647 | select FB_CFB_FILLRECT | |
1648 | select FB_CFB_COPYAREA | |
1649 | select FB_CFB_IMAGEBLIT | |
1650 | ---help--- | |
1651 | Frame buffer driver for the CRT and LCD controllers in the Silicon | |
1652 | Motion SM501. | |
1653 | ||
1654 | This driver is also available as a module ( = code which can be | |
1655 | inserted and removed from the running kernel whenever you want). The | |
1656 | module will be called sm501fb. If you want to compile it as a module, | |
1657 | say M here and read <file:Documentation/modules.txt>. | |
1658 | ||
1659 | If unsure, say N. | |
1660 | ||
1661 | ||
36c9366e VW |
1662 | config FB_PNX4008_DUM |
1663 | tristate "Display Update Module support on Philips PNX4008 board" | |
1664 | depends on FB && ARCH_PNX4008 | |
1665 | ---help--- | |
1666 | Say Y here to enable support for PNX4008 Display Update Module (DUM) | |
1667 | ||
1668 | config FB_PNX4008_DUM_RGB | |
1669 | tristate "RGB Framebuffer support on Philips PNX4008 board" | |
1670 | depends on FB_PNX4008_DUM | |
1671 | select FB_CFB_FILLRECT | |
1672 | select FB_CFB_COPYAREA | |
1673 | select FB_CFB_IMAGEBLIT | |
1674 | ---help--- | |
1675 | Say Y here to enable support for PNX4008 RGB Framebuffer | |
1676 | ||
a3d89983 PM |
1677 | config FB_IBM_GXT4500 |
1678 | tristate "Framebuffer support for IBM GXT4500P adaptor" | |
1679 | depends on PPC | |
1680 | select FB_CFB_FILLRECT | |
1681 | select FB_CFB_COPYAREA | |
1682 | select FB_CFB_IMAGEBLIT | |
1683 | ---help--- | |
1684 | Say Y here to enable support for the IBM GXT4500P display | |
1685 | adaptor, found on some IBM System P (pSeries) machines. | |
1686 | ||
310d8c11 GU |
1687 | config FB_PS3 |
1688 | bool "PS3 GPU framebuffer driver" | |
833f8062 | 1689 | depends on (FB = y) && PS3_PS3AV |
310d8c11 GU |
1690 | select FB_CFB_FILLRECT |
1691 | select FB_CFB_COPYAREA | |
1692 | select FB_CFB_IMAGEBLIT | |
1693 | ---help--- | |
1694 | Include support for the virtual frame buffer in the PS3 platform. | |
1695 | ||
1696 | config FB_PS3_DEFAULT_SIZE_M | |
1697 | int "PS3 default frame buffer size (in MiB)" | |
1698 | depends on FB_PS3 | |
1699 | default 18 | |
1700 | ---help--- | |
1701 | This is the default size (in MiB) of the virtual frame buffer in | |
1702 | the PS3. | |
1703 | The default value can be overridden on the kernel command line | |
1704 | using the "ps3fb" option (e.g. "ps3fb=9M"); | |
1705 | ||
1da177e4 LT |
1706 | config FB_VIRTUAL |
1707 | tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)" | |
1708 | depends on FB | |
1709 | select FB_CFB_FILLRECT | |
1710 | select FB_CFB_COPYAREA | |
1711 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1712 | ---help--- |
1713 | This is a `virtual' frame buffer device. It operates on a chunk of | |
1714 | unswappable kernel memory instead of on the memory of a graphics | |
1715 | board. This means you cannot see any output sent to this frame | |
1716 | buffer device, while it does consume precious memory. The main use | |
1717 | of this frame buffer device is testing and debugging the frame | |
1718 | buffer subsystem. Do NOT enable it for normal systems! To protect | |
1719 | the innocent, it has to be enabled explicitly at boot time using the | |
1720 | kernel option `video=vfb:'. | |
1721 | ||
1722 | To compile this driver as a module, choose M here: the | |
66cf7512 MF |
1723 | module will be called vfb. In order to load it, you must use |
1724 | the vfb_enable=1 option. | |
1da177e4 LT |
1725 | |
1726 | If unsure, say N. | |
e0e34ef7 | 1727 | |
1da177e4 LT |
1728 | if VT |
1729 | source "drivers/video/console/Kconfig" | |
1730 | endif | |
1731 | ||
1732 | if FB || SGI_NEWPORT_CONSOLE | |
1733 | source "drivers/video/logo/Kconfig" | |
1734 | endif | |
1735 | ||
1da177e4 LT |
1736 | endmenu |
1737 |