]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | # |
2 | # Video configuration | |
3 | # | |
4 | ||
5 | menu "Graphics support" | |
6 | ||
ba70710e AD |
7 | config FIRMWARE_EDID |
8 | bool "Enable firmware EDID" | |
9 | default y | |
10 | ---help--- | |
11 | This enables access to the EDID transferred from the firmware. | |
12 | On the i386, this is from the Video BIOS. Enable this if DDC/I2C | |
13 | transfers do not work for your driver and if you are using | |
14 | nvidiafb, i810fb or savagefb. | |
15 | ||
16 | In general, choosing Y for this option is safe. If you | |
17 | experience extremely long delays while booting before you get | |
18 | something on your display, try setting this to N. Matrox cards in | |
19 | combination with certain motherboards and monitors are known to | |
20 | suffer from this problem. | |
21 | ||
1da177e4 LT |
22 | config FB |
23 | tristate "Support for frame buffer devices" | |
24 | ---help--- | |
25 | The frame buffer device provides an abstraction for the graphics | |
26 | hardware. It represents the frame buffer of some video hardware and | |
27 | allows application software to access the graphics hardware through | |
28 | a well-defined interface, so the software doesn't need to know | |
29 | anything about the low-level (hardware register) stuff. | |
30 | ||
31 | Frame buffer devices work identically across the different | |
32 | architectures supported by Linux and make the implementation of | |
33 | application programs easier and more portable; at this point, an X | |
34 | server exists which uses the frame buffer device exclusively. | |
35 | On several non-X86 architectures, the frame buffer device is the | |
36 | only way to use the graphics hardware. | |
37 | ||
38 | The device is accessed through special device nodes, usually located | |
39 | in the /dev directory, i.e. /dev/fb*. | |
40 | ||
41 | You need an utility program called fbset to make full use of frame | |
42 | buffer devices. Please read <file:Documentation/fb/framebuffer.txt> | |
43 | and the Framebuffer-HOWTO at | |
44 | <http://www.tahallah.demon.co.uk/programming/prog.html> for more | |
45 | information. | |
46 | ||
47 | Say Y here and to the driver for your graphics board below if you | |
48 | are compiling a kernel for a non-x86 architecture. | |
49 | ||
50 | If you are compiling for the x86 architecture, you can say Y if you | |
51 | want to play with it, but it is not essential. Please note that | |
52 | running graphical applications that directly touch the hardware | |
53 | (e.g. an accelerated X server) and that are not frame buffer | |
54 | device-aware may cause unexpected results. If unsure, say N. | |
55 | ||
56 | config FB_CFB_FILLRECT | |
57 | tristate | |
58 | depends on FB | |
59 | default n | |
60 | ---help--- | |
61 | Include the cfb_fillrect function for generic software rectangle | |
62 | filling. This is used by drivers that don't provide their own | |
63 | (accelerated) version. | |
64 | ||
65 | config FB_CFB_COPYAREA | |
66 | tristate | |
67 | depends on FB | |
68 | default n | |
69 | ---help--- | |
70 | Include the cfb_copyarea function for generic software area copying. | |
71 | This is used by drivers that don't provide their own (accelerated) | |
72 | version. | |
73 | ||
74 | config FB_CFB_IMAGEBLIT | |
75 | tristate | |
76 | depends on FB | |
77 | default n | |
78 | ---help--- | |
79 | Include the cfb_imageblit function for generic software image | |
80 | blitting. This is used by drivers that don't provide their own | |
81 | (accelerated) version. | |
82 | ||
1da177e4 LT |
83 | config FB_MACMODES |
84 | tristate | |
85 | depends on FB | |
86 | default n | |
87 | ||
5474c120 MH |
88 | config FB_BACKLIGHT |
89 | bool | |
90 | depends on FB | |
91 | default n | |
92 | ||
1da177e4 LT |
93 | config FB_MODE_HELPERS |
94 | bool "Enable Video Mode Handling Helpers" | |
95 | depends on FB | |
96 | default n | |
97 | ---help--- | |
98 | This enables functions for handling video modes using the | |
99 | Generalized Timing Formula and the EDID parser. A few drivers rely | |
100 | on this feature such as the radeonfb, rivafb, and the i810fb. If | |
101 | your driver does not take advantage of this feature, choosing Y will | |
102 | just increase the kernel size by about 5K. | |
103 | ||
104 | config FB_TILEBLITTING | |
105 | bool "Enable Tile Blitting Support" | |
106 | depends on FB | |
107 | default n | |
108 | ---help--- | |
109 | This enables tile blitting. Tile blitting is a drawing technique | |
110 | where the screen is divided into rectangular sections (tiles), whereas | |
111 | the standard blitting divides the screen into pixels. Because the | |
112 | default drawing element is a tile, drawing functions will be passed | |
113 | parameters in terms of number of tiles instead of number of pixels. | |
114 | For example, to draw a single character, instead of using bitmaps, | |
115 | an index to an array of bitmaps will be used. To clear or move a | |
116 | rectangular section of a screen, the rectangle will be described in | |
117 | terms of number of tiles in the x- and y-axis. | |
118 | ||
119 | This is particularly important to one driver, matroxfb. If | |
120 | unsure, say N. | |
121 | ||
122 | config FB_CIRRUS | |
123 | tristate "Cirrus Logic support" | |
124 | depends on FB && (ZORRO || PCI) | |
125 | select FB_CFB_FILLRECT | |
126 | select FB_CFB_COPYAREA | |
127 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
128 | ---help--- |
129 | This enables support for Cirrus Logic GD542x/543x based boards on | |
130 | Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum. | |
131 | ||
132 | If you have a PCI-based system, this enables support for these | |
133 | chips: GD-543x, GD-544x, GD-5480. | |
134 | ||
135 | Please read the file <file:Documentation/fb/cirrusfb.txt>. | |
136 | ||
137 | Say N unless you have such a graphics board or plan to get one | |
138 | before you next recompile the kernel. | |
139 | ||
140 | config FB_PM2 | |
141 | tristate "Permedia2 support" | |
142 | depends on FB && ((AMIGA && BROKEN) || PCI) | |
143 | select FB_CFB_FILLRECT | |
144 | select FB_CFB_COPYAREA | |
145 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
146 | help |
147 | This is the frame buffer device driver for the Permedia2 AGP frame | |
148 | buffer card from ASK, aka `Graphic Blaster Exxtreme'. There is a | |
149 | product page at | |
150 | <http://www.ask.com.hk/product/Permedia%202/permedia2.htm>. | |
151 | ||
152 | config FB_PM2_FIFO_DISCONNECT | |
153 | bool "enable FIFO disconnect feature" | |
154 | depends on FB_PM2 && PCI | |
155 | help | |
156 | Support the Permedia2 FIFO disconnect feature (see CONFIG_FB_PM2). | |
157 | ||
158 | config FB_ARMCLCD | |
159 | tristate "ARM PrimeCell PL110 support" | |
160 | depends on FB && ARM && ARM_AMBA | |
161 | select FB_CFB_FILLRECT | |
162 | select FB_CFB_COPYAREA | |
163 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
164 | help |
165 | This framebuffer device driver is for the ARM PrimeCell PL110 | |
166 | Colour LCD controller. ARM PrimeCells provide the building | |
167 | blocks for System on a Chip devices. | |
168 | ||
169 | If you want to compile this as a module (=code which can be | |
170 | inserted into and removed from the running kernel), say M | |
171 | here and read <file:Documentation/modules.txt>. The module | |
172 | will be called amba-clcd. | |
173 | ||
903e2bbd MS |
174 | choice |
175 | ||
176 | depends on FB_ARMCLCD && (ARCH_LH7A40X || ARCH_LH7952X) | |
177 | prompt "LCD Panel" | |
178 | default FB_ARMCLCD_SHARP_LQ035Q7DB02 | |
179 | ||
180 | config FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT | |
181 | bool "LogicPD LCD 3.5\" QVGA w/HRTFT IC" | |
182 | help | |
183 | This is an implementation of the Sharp LQ035Q7DB02, a 3.5" | |
184 | color QVGA, HRTFT panel. The LogicPD device includes an | |
185 | an integrated HRTFT controller IC. | |
186 | The native resolution is 240x320. | |
187 | ||
188 | config FB_ARMCLCD_SHARP_LQ057Q3DC02 | |
189 | bool "LogicPD LCD 5.7\" QVGA" | |
190 | help | |
191 | This is an implementation of the Sharp LQ057Q3DC02, a 5.7" | |
192 | color QVGA, TFT panel. The LogicPD device includes an | |
193 | The native resolution is 320x240. | |
194 | ||
195 | config FB_ARMCLCD_SHARP_LQ64D343 | |
196 | bool "LogicPD LCD 6.4\" VGA" | |
197 | help | |
198 | This is an implementation of the Sharp LQ64D343, a 6.4" | |
199 | color VGA, TFT panel. The LogicPD device includes an | |
200 | The native resolution is 640x480. | |
201 | ||
202 | config FB_ARMCLCD_SHARP_LQ10D368 | |
203 | bool "LogicPD LCD 10.4\" VGA" | |
204 | help | |
205 | This is an implementation of the Sharp LQ10D368, a 10.4" | |
206 | color VGA, TFT panel. The LogicPD device includes an | |
207 | The native resolution is 640x480. | |
208 | ||
209 | ||
210 | config FB_ARMCLCD_SHARP_LQ121S1DG41 | |
211 | bool "LogicPD LCD 12.1\" SVGA" | |
212 | help | |
213 | This is an implementation of the Sharp LQ121S1DG41, a 12.1" | |
214 | color SVGA, TFT panel. The LogicPD device includes an | |
215 | The native resolution is 800x600. | |
216 | ||
217 | This panel requires a clock rate may be an integer fraction | |
218 | of the base LCDCLK frequency. The driver will select the | |
219 | highest frequency available that is lower than the maximum | |
220 | allowed. The panel may flicker if the clock rate is | |
221 | slower than the recommended minimum. | |
222 | ||
223 | config FB_ARMCLCD_AUO_A070VW01_WIDE | |
224 | bool "AU Optronics A070VW01 LCD 7.0\" WIDE" | |
225 | help | |
226 | This is an implementation of the AU Optronics, a 7.0" | |
227 | WIDE Color. The native resolution is 234x480. | |
228 | ||
229 | config FB_ARMCLCD_HITACHI | |
230 | bool "Hitachi Wide Screen 800x480" | |
231 | help | |
232 | This is an implementation of the Hitachi 800x480. | |
233 | ||
234 | endchoice | |
235 | ||
236 | ||
1da177e4 LT |
237 | config FB_ACORN |
238 | bool "Acorn VIDC support" | |
239 | depends on (FB = y) && ARM && (ARCH_ACORN || ARCH_CLPS7500) | |
240 | select FB_CFB_FILLRECT | |
241 | select FB_CFB_COPYAREA | |
242 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
243 | help |
244 | This is the frame buffer device driver for the Acorn VIDC graphics | |
245 | hardware found in Acorn RISC PCs and other ARM-based machines. If | |
246 | unsure, say N. | |
247 | ||
248 | config FB_CLPS711X | |
249 | bool "CLPS711X LCD support" | |
250 | depends on (FB = y) && ARM && ARCH_CLPS711X | |
251 | select FB_CFB_FILLRECT | |
252 | select FB_CFB_COPYAREA | |
253 | select FB_CFB_IMAGEBLIT | |
e65c0850 RD |
254 | help |
255 | Say Y to enable the Framebuffer driver for the CLPS7111 and | |
256 | EP7212 processors. | |
1da177e4 LT |
257 | |
258 | config FB_SA1100 | |
259 | bool "SA-1100 LCD support" | |
260 | depends on (FB = y) && ARM && ARCH_SA1100 | |
261 | select FB_CFB_FILLRECT | |
262 | select FB_CFB_COPYAREA | |
263 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
264 | help |
265 | This is a framebuffer device for the SA-1100 LCD Controller. | |
266 | See <http://www.linux-fbdev.org/> for information on framebuffer | |
267 | devices. | |
268 | ||
269 | If you plan to use the LCD display with your SA-1100 system, say | |
270 | Y here. | |
271 | ||
7c2f891c SH |
272 | config FB_IMX |
273 | tristate "Motorola i.MX LCD support" | |
274 | depends on FB && ARM && ARCH_IMX | |
275 | select FB_CFB_FILLRECT | |
276 | select FB_CFB_COPYAREA | |
277 | select FB_CFB_IMAGEBLIT | |
7c2f891c | 278 | |
1da177e4 LT |
279 | config FB_CYBER2000 |
280 | tristate "CyberPro 2000/2010/5000 support" | |
281 | depends on FB && PCI && (BROKEN || !SPARC64) | |
282 | select FB_CFB_FILLRECT | |
283 | select FB_CFB_COPYAREA | |
284 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
285 | help |
286 | This enables support for the Integraphics CyberPro 20x0 and 5000 | |
287 | VGA chips used in the Rebel.com Netwinder and other machines. | |
288 | Say Y if you have a NetWinder or a graphics card containing this | |
289 | device, otherwise say N. | |
290 | ||
291 | config FB_APOLLO | |
292 | bool | |
293 | depends on (FB = y) && APOLLO | |
294 | default y | |
295 | select FB_CFB_FILLRECT | |
296 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
297 | |
298 | config FB_Q40 | |
299 | bool | |
300 | depends on (FB = y) && Q40 | |
301 | default y | |
302 | select FB_CFB_FILLRECT | |
303 | select FB_CFB_COPYAREA | |
304 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
305 | |
306 | config FB_AMIGA | |
307 | tristate "Amiga native chipset support" | |
308 | depends on FB && AMIGA | |
1da177e4 LT |
309 | help |
310 | This is the frame buffer device driver for the builtin graphics | |
311 | chipset found in Amigas. | |
312 | ||
313 | To compile this driver as a module, choose M here: the | |
314 | module will be called amifb. | |
315 | ||
316 | config FB_AMIGA_OCS | |
317 | bool "Amiga OCS chipset support" | |
318 | depends on FB_AMIGA | |
319 | help | |
320 | This enables support for the original Agnus and Denise video chips, | |
321 | found in the Amiga 1000 and most A500's and A2000's. If you intend | |
322 | to run Linux on any of these systems, say Y; otherwise say N. | |
323 | ||
324 | config FB_AMIGA_ECS | |
325 | bool "Amiga ECS chipset support" | |
326 | depends on FB_AMIGA | |
327 | help | |
328 | This enables support for the Enhanced Chip Set, found in later | |
329 | A500's, later A2000's, the A600, the A3000, the A3000T and CDTV. If | |
330 | you intend to run Linux on any of these systems, say Y; otherwise | |
331 | say N. | |
332 | ||
333 | config FB_AMIGA_AGA | |
334 | bool "Amiga AGA chipset support" | |
335 | depends on FB_AMIGA | |
336 | help | |
337 | This enables support for the Advanced Graphics Architecture (also | |
338 | known as the AGA or AA) Chip Set, found in the A1200, A4000, A4000T | |
339 | and CD32. If you intend to run Linux on any of these systems, say Y; | |
340 | otherwise say N. | |
341 | ||
342 | config FB_CYBER | |
343 | tristate "Amiga CyberVision 64 support" | |
344 | depends on FB && ZORRO && BROKEN | |
345 | select FB_CFB_FILLRECT | |
346 | select FB_CFB_COPYAREA | |
347 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
348 | help |
349 | This enables support for the Cybervision 64 graphics card from | |
350 | Phase5. Please note that its use is not all that intuitive (i.e. if | |
351 | you have any questions, be sure to ask!). Say N unless you have a | |
352 | Cybervision 64 or plan to get one before you next recompile the | |
353 | kernel. Please note that this driver DOES NOT support the | |
354 | Cybervision 64/3D card, as they use incompatible video chips. | |
355 | ||
356 | config FB_VIRGE | |
357 | bool "Amiga CyberVision 64/3D support " | |
358 | depends on (FB = y) && ZORRO && BROKEN | |
359 | select FB_CFB_FILLRECT | |
360 | select FB_CFB_COPYAREA | |
361 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
362 | help |
363 | This enables support for the Cybervision 64/3D graphics card from | |
364 | Phase5. Please note that its use is not all that intuitive (i.e. if | |
365 | you have any questions, be sure to ask!). Say N unless you have a | |
366 | Cybervision 64/3D or plan to get one before you next recompile the | |
367 | kernel. Please note that this driver DOES NOT support the older | |
368 | Cybervision 64 card, as they use incompatible video chips. | |
369 | ||
370 | config FB_RETINAZ3 | |
371 | tristate "Amiga Retina Z3 support" | |
372 | depends on (FB = y) && ZORRO && BROKEN | |
373 | help | |
374 | This enables support for the Retina Z3 graphics card. Say N unless | |
375 | you have a Retina Z3 or plan to get one before you next recompile | |
376 | the kernel. | |
377 | ||
378 | config FB_FM2 | |
379 | bool "Amiga FrameMaster II/Rainbow II support" | |
380 | depends on (FB = y) && ZORRO | |
381 | select FB_CFB_FILLRECT | |
382 | select FB_CFB_COPYAREA | |
383 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
384 | help |
385 | This is the frame buffer device driver for the Amiga FrameMaster | |
386 | card from BSC (exhibited 1992 but not shipped as a CBM product). | |
387 | ||
1154ea7d JK |
388 | config FB_ARC |
389 | tristate "Arc Monochrome LCD board support" | |
390 | depends on FB && X86 | |
391 | select FB_CFB_FILLRECT | |
392 | select FB_CFB_COPYAREA | |
393 | select FB_CFB_IMAGEBLIT | |
1154ea7d JK |
394 | help |
395 | This enables support for the Arc Monochrome LCD board. The board | |
396 | is based on the KS-108 lcd controller and is typically a matrix | |
397 | of 2*n chips. This driver was tested with a 128x64 panel. This | |
398 | driver supports it for use with x86 SBCs through a 16 bit GPIO | |
399 | interface (8 bit data, 8 bit control). If you anticpate using | |
400 | this driver, say Y or M; otherwise say N. You must specify the | |
401 | GPIO IO address to be used for setting control and data. | |
402 | ||
1da177e4 LT |
403 | config FB_ATARI |
404 | bool "Atari native chipset support" | |
405 | depends on (FB = y) && ATARI && BROKEN | |
406 | help | |
407 | This is the frame buffer device driver for the builtin graphics | |
408 | chipset found in Ataris. | |
409 | ||
410 | config FB_OF | |
411 | bool "Open Firmware frame buffer device support" | |
412 | depends on (FB = y) && (PPC64 || PPC_OF) | |
413 | select FB_CFB_FILLRECT | |
414 | select FB_CFB_COPYAREA | |
415 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
416 | select FB_MACMODES |
417 | help | |
418 | Say Y if you want support with Open Firmware for your graphics | |
419 | board. | |
420 | ||
421 | config FB_CONTROL | |
422 | bool "Apple \"control\" display support" | |
423 | depends on (FB = y) && PPC_PMAC | |
424 | select FB_CFB_FILLRECT | |
425 | select FB_CFB_COPYAREA | |
426 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
427 | select FB_MACMODES |
428 | help | |
429 | This driver supports a frame buffer for the graphics adapter in the | |
430 | Power Macintosh 7300 and others. | |
431 | ||
432 | config FB_PLATINUM | |
433 | bool "Apple \"platinum\" display support" | |
434 | depends on (FB = y) && PPC_PMAC | |
435 | select FB_CFB_FILLRECT | |
436 | select FB_CFB_COPYAREA | |
437 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
438 | select FB_MACMODES |
439 | help | |
440 | This driver supports a frame buffer for the "platinum" graphics | |
441 | adapter in some Power Macintoshes. | |
442 | ||
443 | config FB_VALKYRIE | |
444 | bool "Apple \"valkyrie\" display support" | |
445 | depends on (FB = y) && (MAC || PPC_PMAC) | |
446 | select FB_CFB_FILLRECT | |
447 | select FB_CFB_COPYAREA | |
448 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
449 | select FB_MACMODES |
450 | help | |
451 | This driver supports a frame buffer for the "valkyrie" graphics | |
452 | adapter in some Power Macintoshes. | |
453 | ||
454 | config FB_CT65550 | |
455 | bool "Chips 65550 display support" | |
456 | depends on (FB = y) && PPC | |
457 | select FB_CFB_FILLRECT | |
458 | select FB_CFB_COPYAREA | |
459 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
460 | help |
461 | This is the frame buffer device driver for the Chips & Technologies | |
462 | 65550 graphics chip in PowerBooks. | |
463 | ||
464 | config FB_ASILIANT | |
e65c0850 | 465 | bool "Asiliant (Chips) 69000 display support" |
1da177e4 LT |
466 | depends on (FB = y) && PCI |
467 | select FB_CFB_FILLRECT | |
468 | select FB_CFB_COPYAREA | |
469 | select FB_CFB_IMAGEBLIT | |
4de0b1ee AD |
470 | help |
471 | This is the frame buffer device driver for the Asiliant 69030 chipset | |
1da177e4 LT |
472 | |
473 | config FB_IMSTT | |
474 | bool "IMS Twin Turbo display support" | |
475 | depends on (FB = y) && PCI | |
476 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
477 | select FB_MACMODES if PPC |
478 | help | |
479 | The IMS Twin Turbo is a PCI-based frame buffer card bundled with | |
480 | many Macintosh and compatible computers. | |
481 | ||
1da177e4 LT |
482 | config FB_VGA16 |
483 | tristate "VGA 16-color graphics support" | |
484 | depends on FB && (X86 || PPC) | |
485 | select FB_CFB_FILLRECT | |
486 | select FB_CFB_COPYAREA | |
487 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
488 | help |
489 | This is the frame buffer device driver for VGA 16 color graphic | |
490 | cards. Say Y if you have such a card. | |
491 | ||
492 | To compile this driver as a module, choose M here: the | |
493 | module will be called vga16fb. | |
494 | ||
495 | config FB_STI | |
496 | tristate "HP STI frame buffer device support" | |
497 | depends on FB && PARISC | |
498 | select FB_CFB_FILLRECT | |
499 | select FB_CFB_COPYAREA | |
500 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
501 | default y |
502 | ---help--- | |
503 | STI refers to the HP "Standard Text Interface" which is a set of | |
504 | BIOS routines contained in a ROM chip in HP PA-RISC based machines. | |
505 | Enabling this option will implement the linux framebuffer device | |
506 | using calls to the STI BIOS routines for initialisation. | |
507 | ||
508 | If you enable this option, you will get a planar framebuffer device | |
509 | /dev/fb which will work on the most common HP graphic cards of the | |
510 | NGLE family, including the artist chips (in the 7xx and Bxxx series), | |
511 | HCRX, HCRX24, CRX, CRX24 and VisEG series. | |
512 | ||
513 | It is safe to enable this option, so you should probably say "Y". | |
514 | ||
515 | config FB_MAC | |
516 | bool "Generic Macintosh display support" | |
517 | depends on (FB = y) && MAC | |
518 | select FB_CFB_FILLRECT | |
519 | select FB_CFB_COPYAREA | |
520 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
521 | select FB_MACMODES |
522 | ||
523 | # bool ' Apple DAFB display support' CONFIG_FB_DAFB | |
524 | config FB_HP300 | |
525 | bool | |
526 | depends on (FB = y) && HP300 | |
527 | select FB_CFB_FILLRECT | |
528 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
529 | default y |
530 | ||
531 | config FB_TGA | |
532 | tristate "TGA framebuffer support" | |
533 | depends on FB && ALPHA | |
534 | select FB_CFB_FILLRECT | |
535 | select FB_CFB_COPYAREA | |
536 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
537 | help |
538 | This is the frame buffer device driver for generic TGA graphic | |
539 | cards. Say Y if you have one of those. | |
540 | ||
541 | config FB_VESA | |
542 | bool "VESA VGA graphics support" | |
0d078f6f | 543 | depends on (FB = y) && X86 |
1da177e4 LT |
544 | select FB_CFB_FILLRECT |
545 | select FB_CFB_COPYAREA | |
546 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
547 | help |
548 | This is the frame buffer device driver for generic VESA 2.0 | |
549 | compliant graphic cards. The older VESA 1.2 cards are not supported. | |
550 | You will get a boot time penguin logo at no additional cost. Please | |
551 | read <file:Documentation/fb/vesafb.txt>. If unsure, say Y. | |
552 | ||
90b4f9ac EH |
553 | config FB_IMAC |
554 | bool "Intel-based Macintosh Framebuffer Support" | |
555 | depends on (FB = y) && X86 | |
556 | select FB_CFB_FILLRECT | |
557 | select FB_CFB_COPYAREA | |
558 | select FB_CFB_IMAGEBLIT | |
559 | help | |
560 | This is the frame buffer device driver for the Intel-based Macintosh | |
561 | ||
1da177e4 LT |
562 | config FB_HGA |
563 | tristate "Hercules mono graphics support" | |
564 | depends on FB && X86 | |
565 | select FB_CFB_FILLRECT | |
566 | select FB_CFB_COPYAREA | |
567 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
568 | help |
569 | Say Y here if you have a Hercules mono graphics card. | |
570 | ||
571 | To compile this driver as a module, choose M here: the | |
572 | module will be called hgafb. | |
573 | ||
574 | As this card technology is 15 years old, most people will answer N | |
575 | here. | |
576 | ||
577 | config FB_HGA_ACCEL | |
578 | bool "Hercules mono Acceleration functions (EXPERIMENTAL)" | |
579 | depends on FB_HGA && EXPERIMENTAL | |
580 | ---help--- | |
581 | This will compile the Hercules mono graphics with | |
582 | acceleration functions. | |
583 | ||
1da177e4 LT |
584 | config FB_SGIVW |
585 | tristate "SGI Visual Workstation framebuffer support" | |
586 | depends on FB && X86_VISWS | |
587 | select FB_CFB_FILLRECT | |
588 | select FB_CFB_COPYAREA | |
589 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
590 | help |
591 | SGI Visual Workstation support for framebuffer graphics. | |
592 | ||
593 | config FB_GBE | |
594 | bool "SGI Graphics Backend frame buffer support" | |
595 | depends on (FB = y) && (SGI_IP32 || X86_VISWS) | |
596 | select FB_CFB_FILLRECT | |
597 | select FB_CFB_COPYAREA | |
598 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
599 | help |
600 | This is the frame buffer device driver for SGI Graphics Backend. | |
601 | This chip is used in SGI O2 and Visual Workstation 320/540. | |
602 | ||
603 | config FB_GBE_MEM | |
604 | int "Video memory size in MB" | |
605 | depends on FB_GBE | |
80c410dc | 606 | default 4 |
1da177e4 LT |
607 | help |
608 | This is the amount of memory reserved for the framebuffer, | |
609 | which can be any value between 1MB and 8MB. | |
610 | ||
1da177e4 LT |
611 | config FB_SUN3 |
612 | bool "Sun3 framebuffer support" | |
613 | depends on (FB = y) && (SUN3 || SUN3X) && BROKEN | |
614 | ||
1a571986 MF |
615 | config FB_SBUS |
616 | bool "SBUS and UPA framebuffers" | |
0b57ee9e | 617 | depends on (FB = y) && SPARC |
1a571986 MF |
618 | help |
619 | Say Y if you want support for SBUS or UPA based frame buffer device. | |
620 | ||
1da177e4 LT |
621 | config FB_BW2 |
622 | bool "BWtwo support" | |
0b57ee9e | 623 | depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) |
1da177e4 LT |
624 | select FB_CFB_FILLRECT |
625 | select FB_CFB_COPYAREA | |
626 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
627 | help |
628 | This is the frame buffer device driver for the BWtwo frame buffer. | |
629 | ||
630 | config FB_CG3 | |
631 | bool "CGthree support" | |
0b57ee9e | 632 | depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) |
1a571986 | 633 | select FB_CFB_FILLRECT |
1da177e4 LT |
634 | select FB_CFB_COPYAREA |
635 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
636 | help |
637 | This is the frame buffer device driver for the CGthree frame buffer. | |
638 | ||
639 | config FB_CG6 | |
640 | bool "CGsix (GX,TurboGX) support" | |
0b57ee9e | 641 | depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) |
1da177e4 LT |
642 | select FB_CFB_COPYAREA |
643 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
644 | help |
645 | This is the frame buffer device driver for the CGsix (GX, TurboGX) | |
646 | frame buffer. | |
647 | ||
648 | config FB_PVR2 | |
649 | tristate "NEC PowerVR 2 display support" | |
650 | depends on FB && SH_DREAMCAST | |
651 | select FB_CFB_FILLRECT | |
652 | select FB_CFB_COPYAREA | |
653 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
654 | ---help--- |
655 | Say Y here if you have a PowerVR 2 card in your box. If you plan to | |
656 | run linux on your Dreamcast, you will have to say Y here. | |
657 | This driver may or may not work on other PowerVR 2 cards, but is | |
658 | totally untested. Use at your own risk. If unsure, say N. | |
659 | ||
660 | To compile this driver as a module, choose M here: the | |
661 | module will be called pvr2fb. | |
662 | ||
663 | You can pass several parameters to the driver at boot time or at | |
664 | module load time. The parameters look like "video=pvr2:XXX", where | |
665 | the meaning of XXX can be found at the end of the main source file | |
666 | (<file:drivers/video/pvr2fb.c>). Please see the file | |
667 | <file:Documentation/fb/pvr2fb.txt>. | |
668 | ||
669 | config FB_EPSON1355 | |
670 | bool "Epson 1355 framebuffer support" | |
671 | depends on (FB = y) && (SUPERH || ARCH_CEIVA) | |
672 | select FB_CFB_FILLRECT | |
673 | select FB_CFB_COPYAREA | |
674 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
675 | help |
676 | Build in support for the SED1355 Epson Research Embedded RAMDAC | |
677 | LCD/CRT Controller (since redesignated as the S1D13505) as a | |
678 | framebuffer. Product specs at | |
679 | <http://www.erd.epson.com/vdc/html/products.htm>. | |
680 | ||
ecc41d5e RD |
681 | config FB_S1D13XXX |
682 | tristate "Epson S1D13XXX framebuffer support" | |
683 | depends on FB | |
684 | select FB_CFB_FILLRECT | |
685 | select FB_CFB_COPYAREA | |
686 | select FB_CFB_IMAGEBLIT | |
ecc41d5e RD |
687 | help |
688 | Support for S1D13XXX framebuffer device family (currently only | |
689 | working with S1D13806). Product specs at | |
690 | <http://www.erd.epson.com/vdc/html/legacy_13xxx.htm> | |
691 | ||
1da177e4 LT |
692 | config FB_NVIDIA |
693 | tristate "nVidia Framebuffer Support" | |
694 | depends on FB && PCI | |
695 | select I2C_ALGOBIT if FB_NVIDIA_I2C | |
696 | select I2C if FB_NVIDIA_I2C | |
697 | select FB_MODE_HELPERS | |
698 | select FB_CFB_FILLRECT | |
699 | select FB_CFB_COPYAREA | |
700 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
701 | help |
702 | This driver supports graphics boards with the nVidia chips, TNT | |
703 | and newer. For very old chipsets, such as the RIVA128, then use | |
704 | the rivafb. | |
705 | Say Y if you have such a graphics board. | |
706 | ||
707 | To compile this driver as a module, choose M here: the | |
708 | module will be called nvidiafb. | |
709 | ||
710 | config FB_NVIDIA_I2C | |
711 | bool "Enable DDC Support" | |
85f1503a | 712 | depends on FB_NVIDIA |
1da177e4 LT |
713 | help |
714 | This enables I2C support for nVidia Chipsets. This is used | |
715 | only for getting EDID information from the attached display | |
716 | allowing for robust video mode handling and switching. | |
717 | ||
718 | Because fbdev-2.6 requires that drivers must be able to | |
719 | independently validate video mode parameters, you should say Y | |
720 | here. | |
721 | ||
5474c120 MH |
722 | config FB_NVIDIA_BACKLIGHT |
723 | bool "Support for backlight control" | |
724 | depends on FB_NVIDIA && PPC_PMAC | |
725 | select FB_BACKLIGHT | |
726 | select BACKLIGHT_LCD_SUPPORT | |
727 | select BACKLIGHT_CLASS_DEVICE | |
728 | default y | |
729 | help | |
730 | Say Y here if you want to control the backlight of your display. | |
731 | ||
1da177e4 LT |
732 | config FB_RIVA |
733 | tristate "nVidia Riva support" | |
734 | depends on FB && PCI | |
735 | select I2C_ALGOBIT if FB_RIVA_I2C | |
736 | select I2C if FB_RIVA_I2C | |
737 | select FB_MODE_HELPERS | |
738 | select FB_CFB_FILLRECT | |
739 | select FB_CFB_COPYAREA | |
740 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
741 | help |
742 | This driver supports graphics boards with the nVidia Riva/Geforce | |
743 | chips. | |
744 | Say Y if you have such a graphics board. | |
745 | ||
746 | To compile this driver as a module, choose M here: the | |
747 | module will be called rivafb. | |
748 | ||
749 | config FB_RIVA_I2C | |
750 | bool "Enable DDC Support" | |
751 | depends on FB_RIVA | |
752 | help | |
753 | This enables I2C support for nVidia Chipsets. This is used | |
754 | only for getting EDID information from the attached display | |
755 | allowing for robust video mode handling and switching. | |
756 | ||
757 | Because fbdev-2.6 requires that drivers must be able to | |
758 | independently validate video mode parameters, you should say Y | |
759 | here. | |
760 | ||
761 | config FB_RIVA_DEBUG | |
762 | bool "Lots of debug output from Riva(nVidia) driver" | |
763 | depends on FB_RIVA | |
764 | default n | |
765 | help | |
766 | Say Y here if you want the Riva driver to output all sorts | |
767 | of debugging informations to provide to the maintainer when | |
768 | something goes wrong. | |
769 | ||
5474c120 MH |
770 | config FB_RIVA_BACKLIGHT |
771 | bool "Support for backlight control" | |
772 | depends on FB_RIVA && PPC_PMAC | |
773 | select FB_BACKLIGHT | |
774 | select BACKLIGHT_LCD_SUPPORT | |
775 | select BACKLIGHT_CLASS_DEVICE | |
776 | default y | |
777 | help | |
778 | Say Y here if you want to control the backlight of your display. | |
779 | ||
1da177e4 LT |
780 | config FB_I810 |
781 | tristate "Intel 810/815 support (EXPERIMENTAL)" | |
0d078f6f | 782 | depends on FB && EXPERIMENTAL && PCI && X86_32 |
1da177e4 LT |
783 | select AGP |
784 | select AGP_INTEL | |
785 | select FB_MODE_HELPERS | |
786 | select FB_CFB_FILLRECT | |
787 | select FB_CFB_COPYAREA | |
788 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
789 | help |
790 | This driver supports the on-board graphics built in to the Intel 810 | |
791 | and 815 chipsets. Say Y if you have and plan to use such a board. | |
792 | ||
793 | To compile this driver as a module, choose M here: the | |
794 | module will be called i810fb. | |
795 | ||
796 | For more information, please read | |
797 | <file:Documentation/fb/intel810.txt> | |
798 | ||
799 | config FB_I810_GTF | |
800 | bool "use VESA Generalized Timing Formula" | |
801 | depends on FB_I810 | |
802 | help | |
803 | If you say Y, then the VESA standard, Generalized Timing Formula | |
804 | or GTF, will be used to calculate the required video timing values | |
805 | per video mode. Since the GTF allows nondiscrete timings | |
806 | (nondiscrete being a range of values as opposed to discrete being a | |
807 | set of values), you'll be able to use any combination of horizontal | |
808 | and vertical resolutions, and vertical refresh rates without having | |
809 | to specify your own timing parameters. This is especially useful | |
810 | to maximize the performance of an aging display, or if you just | |
811 | have a display with nonstandard dimensions. A VESA compliant | |
812 | monitor is recommended, but can still work with non-compliant ones. | |
813 | If you need or want this, then select this option. The timings may | |
814 | not be compliant with Intel's recommended values. Use at your own | |
815 | risk. | |
816 | ||
817 | If you say N, the driver will revert to discrete video timings | |
818 | using a set recommended by Intel in their documentation. | |
819 | ||
820 | If unsure, say N. | |
821 | ||
74f6ae84 AD |
822 | config FB_I810_I2C |
823 | bool "Enable DDC Support" | |
db84502b AD |
824 | depends on FB_I810 && FB_I810_GTF |
825 | select I2C | |
74f6ae84 AD |
826 | select I2C_ALGOBIT |
827 | help | |
828 | ||
1da177e4 LT |
829 | config FB_INTEL |
830 | tristate "Intel 830M/845G/852GM/855GM/865G support (EXPERIMENTAL)" | |
0c187add | 831 | depends on FB && EXPERIMENTAL && PCI && X86 |
1da177e4 LT |
832 | select AGP |
833 | select AGP_INTEL | |
834 | select FB_MODE_HELPERS | |
835 | select FB_CFB_FILLRECT | |
836 | select FB_CFB_COPYAREA | |
837 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
838 | help |
839 | This driver supports the on-board graphics built in to the Intel | |
840 | 830M/845G/852GM/855GM/865G chipsets. | |
841 | Say Y if you have and plan to use such a board. | |
842 | ||
843 | To compile this driver as a module, choose M here: the | |
844 | module will be called intelfb. | |
845 | ||
846 | config FB_INTEL_DEBUG | |
847 | bool "Intel driver Debug Messages" | |
848 | depends on FB_INTEL | |
849 | ---help--- | |
850 | Say Y here if you want the Intel driver to output all sorts | |
851 | of debugging informations to provide to the maintainer when | |
852 | something goes wrong. | |
853 | ||
854 | config FB_MATROX | |
855 | tristate "Matrox acceleration" | |
856 | depends on FB && PCI | |
857 | select FB_CFB_FILLRECT | |
858 | select FB_CFB_COPYAREA | |
859 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
860 | select FB_TILEBLITTING |
861 | select FB_MACMODES if PPC_PMAC | |
862 | ---help--- | |
863 | Say Y here if you have a Matrox Millennium, Matrox Millennium II, | |
864 | Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox | |
865 | Mystique G200, Matrox Millennium G200, Matrox Marvel G200 video, | |
866 | Matrox G400, G450 or G550 card in your box. | |
867 | ||
868 | To compile this driver as a module, choose M here: the | |
869 | module will be called matroxfb. | |
870 | ||
871 | You can pass several parameters to the driver at boot time or at | |
872 | module load time. The parameters look like "video=matrox:XXX", and | |
873 | are described in <file:Documentation/fb/matroxfb.txt>. | |
874 | ||
875 | config FB_MATROX_MILLENIUM | |
876 | bool "Millennium I/II support" | |
877 | depends on FB_MATROX | |
878 | help | |
879 | Say Y here if you have a Matrox Millennium or Matrox Millennium II | |
880 | video card. If you select "Advanced lowlevel driver options" below, | |
881 | you should check 4 bpp packed pixel, 8 bpp packed pixel, 16 bpp | |
882 | packed pixel, 24 bpp packed pixel and 32 bpp packed pixel. You can | |
883 | also use font widths different from 8. | |
884 | ||
885 | config FB_MATROX_MYSTIQUE | |
886 | bool "Mystique support" | |
887 | depends on FB_MATROX | |
888 | help | |
889 | Say Y here if you have a Matrox Mystique or Matrox Mystique 220 | |
890 | video card. If you select "Advanced lowlevel driver options" below, | |
891 | you should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp | |
892 | packed pixel and 32 bpp packed pixel. You can also use font widths | |
893 | different from 8. | |
894 | ||
895 | config FB_MATROX_G | |
896 | bool "G100/G200/G400/G450/G550 support" | |
897 | depends on FB_MATROX | |
898 | ---help--- | |
899 | Say Y here if you have a Matrox G100, G200, G400, G450 or G550 based | |
900 | video card. If you select "Advanced lowlevel driver options", you | |
901 | should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp packed | |
902 | pixel and 32 bpp packed pixel. You can also use font widths | |
903 | different from 8. | |
904 | ||
905 | If you need support for G400 secondary head, you must first say Y to | |
906 | "I2C support" in the character devices section, and then to | |
907 | "Matrox I2C support" and "G400 second head support" here in the | |
908 | framebuffer section. G450/G550 secondary head and digital output | |
909 | are supported without additional modules. | |
910 | ||
911 | The driver starts in monitor mode. You must use the matroxset tool | |
912 | (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to | |
913 | swap primary and secondary head outputs, or to change output mode. | |
914 | Secondary head driver always start in 640x480 resolution and you | |
915 | must use fbset to change it. | |
916 | ||
917 | Do not forget that second head supports only 16 and 32 bpp | |
918 | packed pixels, so it is a good idea to compile them into the kernel | |
919 | too. You can use only some font widths, as the driver uses generic | |
920 | painting procedures (the secondary head does not use acceleration | |
921 | engine). | |
922 | ||
923 | G450/G550 hardware can display TV picture only from secondary CRTC, | |
924 | and it performs no scaling, so picture must have 525 or 625 lines. | |
925 | ||
926 | config FB_MATROX_I2C | |
927 | tristate "Matrox I2C support" | |
928 | depends on FB_MATROX && I2C | |
929 | select I2C_ALGOBIT | |
930 | ---help--- | |
931 | This drivers creates I2C buses which are needed for accessing the | |
932 | DDC (I2C) bus present on all Matroxes, an I2C bus which | |
933 | interconnects Matrox optional devices, like MGA-TVO on G200 and | |
934 | G400, and the secondary head DDC bus, present on G400 only. | |
935 | ||
936 | You can say Y or M here if you want to experiment with monitor | |
937 | detection code. You must say Y or M here if you want to use either | |
938 | second head of G400 or MGA-TVO on G200 or G400. | |
939 | ||
940 | If you compile it as module, it will create a module named | |
941 | i2c-matroxfb. | |
942 | ||
943 | config FB_MATROX_MAVEN | |
944 | tristate "G400 second head support" | |
945 | depends on FB_MATROX_G && FB_MATROX_I2C | |
946 | ---help--- | |
947 | WARNING !!! This support does not work with G450 !!! | |
948 | ||
949 | Say Y or M here if you want to use a secondary head (meaning two | |
950 | monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary | |
951 | head is not compatible with accelerated XFree 3.3.x SVGA servers - | |
952 | secondary head output is blanked while you are in X. With XFree | |
953 | 3.9.17 preview you can use both heads if you use SVGA over fbdev or | |
954 | the fbdev driver on first head and the fbdev driver on second head. | |
955 | ||
956 | If you compile it as module, two modules are created, | |
957 | matroxfb_crtc2 and matroxfb_maven. Matroxfb_maven is needed for | |
958 | both G200 and G400, matroxfb_crtc2 is needed only by G400. You must | |
959 | also load i2c-matroxfb to get it to run. | |
960 | ||
961 | The driver starts in monitor mode and you must use the matroxset | |
962 | tool (available at | |
963 | <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to | |
964 | PAL or NTSC or to swap primary and secondary head outputs. | |
965 | Secondary head driver also always start in 640x480 resolution, you | |
966 | must use fbset to change it. | |
967 | ||
968 | Also do not forget that second head supports only 16 and 32 bpp | |
969 | packed pixels, so it is a good idea to compile them into the kernel | |
970 | too. You can use only some font widths, as the driver uses generic | |
971 | painting procedures (the secondary head does not use acceleration | |
972 | engine). | |
973 | ||
974 | config FB_MATROX_MULTIHEAD | |
975 | bool "Multihead support" | |
976 | depends on FB_MATROX | |
977 | ---help--- | |
978 | Say Y here if you have more than one (supported) Matrox device in | |
979 | your computer and you want to use all of them for different monitors | |
980 | ("multihead"). If you have only one device, you should say N because | |
981 | the driver compiled with Y is larger and a bit slower, especially on | |
982 | ia32 (ix86). | |
983 | ||
984 | If you said M to "Matrox unified accelerated driver" and N here, you | |
985 | will still be able to use several Matrox devices simultaneously: | |
986 | insert several instances of the module matroxfb into the kernel | |
987 | with insmod, supplying the parameter "dev=N" where N is 0, 1, etc. | |
988 | for the different Matrox devices. This method is slightly faster but | |
989 | uses 40 KB of kernel memory per Matrox card. | |
990 | ||
991 | There is no need for enabling 'Matrox multihead support' if you have | |
992 | only one Matrox card in the box. | |
993 | ||
1da177e4 LT |
994 | config FB_RADEON |
995 | tristate "ATI Radeon display support" | |
996 | depends on FB && PCI | |
997 | select I2C_ALGOBIT if FB_RADEON_I2C | |
998 | select I2C if FB_RADEON_I2C | |
999 | select FB_MODE_HELPERS | |
1000 | select FB_CFB_FILLRECT | |
1001 | select FB_CFB_COPYAREA | |
1002 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1003 | select FB_MACMODES if PPC_OF |
1004 | help | |
1005 | Choose this option if you want to use an ATI Radeon graphics card as | |
1006 | a framebuffer device. There are both PCI and AGP versions. You | |
1007 | don't need to choose this to run the Radeon in plain VGA mode. | |
1008 | ||
1009 | If you say Y here and want DDC/I2C support you must first say Y to | |
1010 | "I2C support" and "I2C bit-banging support" in the character devices | |
1011 | section. | |
1012 | ||
1013 | If you say M here then "I2C support" and "I2C bit-banging support" | |
1014 | can be build either as modules or built-in. | |
1015 | ||
1016 | There is a product page at | |
f510a3c3 | 1017 | http://apps.ati.com/ATIcompare/ |
5474c120 | 1018 | |
1da177e4 LT |
1019 | config FB_RADEON_I2C |
1020 | bool "DDC/I2C for ATI Radeon support" | |
1021 | depends on FB_RADEON | |
1022 | default y | |
1023 | help | |
1024 | Say Y here if you want DDC/I2C support for your Radeon board. | |
1025 | ||
5474c120 MH |
1026 | config FB_RADEON_BACKLIGHT |
1027 | bool "Support for backlight control" | |
1028 | depends on FB_RADEON && PPC_PMAC | |
1029 | select FB_BACKLIGHT | |
1030 | select BACKLIGHT_LCD_SUPPORT | |
1031 | select BACKLIGHT_CLASS_DEVICE | |
1032 | default y | |
1033 | help | |
1034 | Say Y here if you want to control the backlight of your display. | |
1035 | ||
1da177e4 LT |
1036 | config FB_RADEON_DEBUG |
1037 | bool "Lots of debug output from Radeon driver" | |
1038 | depends on FB_RADEON | |
1039 | default n | |
1040 | help | |
1041 | Say Y here if you want the Radeon driver to output all sorts | |
1042 | of debugging informations to provide to the maintainer when | |
1043 | something goes wrong. | |
1044 | ||
1045 | config FB_ATY128 | |
1046 | tristate "ATI Rage128 display support" | |
1047 | depends on FB && PCI | |
1048 | select FB_CFB_FILLRECT | |
1049 | select FB_CFB_COPYAREA | |
1050 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1051 | select FB_MACMODES if PPC_PMAC |
1052 | help | |
1053 | This driver supports graphics boards with the ATI Rage128 chips. | |
1054 | Say Y if you have such a graphics board and read | |
1055 | <file:Documentation/fb/aty128fb.txt>. | |
1056 | ||
1057 | To compile this driver as a module, choose M here: the | |
1058 | module will be called aty128fb. | |
1059 | ||
5474c120 MH |
1060 | config FB_ATY128_BACKLIGHT |
1061 | bool "Support for backlight control" | |
1062 | depends on FB_ATY128 && PPC_PMAC | |
1063 | select FB_BACKLIGHT | |
1064 | select BACKLIGHT_LCD_SUPPORT | |
1065 | select BACKLIGHT_CLASS_DEVICE | |
1066 | default y | |
1067 | help | |
1068 | Say Y here if you want to control the backlight of your display. | |
1069 | ||
1da177e4 LT |
1070 | config FB_ATY |
1071 | tristate "ATI Mach64 display support" if PCI || ATARI | |
f2e782ef | 1072 | depends on FB && !SPARC32 |
1da177e4 LT |
1073 | select FB_CFB_FILLRECT |
1074 | select FB_CFB_COPYAREA | |
1075 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1076 | select FB_MACMODES if PPC |
1077 | help | |
1078 | This driver supports graphics boards with the ATI Mach64 chips. | |
1079 | Say Y if you have such a graphics board. | |
1080 | ||
1081 | To compile this driver as a module, choose M here: the | |
1082 | module will be called atyfb. | |
1083 | ||
1084 | config FB_ATY_CT | |
1085 | bool "Mach64 CT/VT/GT/LT (incl. 3D RAGE) support" | |
1086 | depends on PCI && FB_ATY | |
1087 | default y if SPARC64 && FB_PCI | |
1088 | help | |
1089 | Say Y here to support use of ATI's 64-bit Rage boards (or other | |
1090 | boards based on the Mach64 CT, VT, GT, and LT chipsets) as a | |
1091 | framebuffer device. The ATI product support page for these boards | |
1092 | is at <http://support.ati.com/products/pc/mach64/>. | |
1093 | ||
1094 | config FB_ATY_GENERIC_LCD | |
1095 | bool "Mach64 generic LCD support (EXPERIMENTAL)" | |
1096 | depends on FB_ATY_CT | |
1097 | help | |
1098 | Say Y if you have a laptop with an ATI Rage LT PRO, Rage Mobility, | |
1099 | Rage XC, or Rage XL chipset. | |
1100 | ||
1da177e4 LT |
1101 | config FB_ATY_GX |
1102 | bool "Mach64 GX support" if PCI | |
1103 | depends on FB_ATY | |
1104 | default y if ATARI | |
1105 | help | |
1106 | Say Y here to support use of the ATI Mach64 Graphics Expression | |
1107 | board (or other boards based on the Mach64 GX chipset) as a | |
1108 | framebuffer device. The ATI product support page for these boards | |
1109 | is at | |
1110 | <http://support.ati.com/products/pc/mach64/graphics_xpression.html>. | |
1111 | ||
5474c120 MH |
1112 | config FB_ATY_BACKLIGHT |
1113 | bool "Support for backlight control" | |
1114 | depends on FB_ATY && PPC_PMAC | |
1115 | select FB_BACKLIGHT | |
1116 | select BACKLIGHT_LCD_SUPPORT | |
1117 | select BACKLIGHT_CLASS_DEVICE | |
1118 | default y | |
1119 | help | |
1120 | Say Y here if you want to control the backlight of your display. | |
1121 | ||
e65c0850 RD |
1122 | config FB_S3TRIO |
1123 | bool "S3 Trio display support" | |
1124 | depends on (FB = y) && PPC && BROKEN | |
1125 | help | |
1126 | If you have a S3 Trio say Y. Say N for S3 Virge. | |
1127 | ||
1da177e4 LT |
1128 | config FB_SAVAGE |
1129 | tristate "S3 Savage support" | |
1130 | depends on FB && PCI && EXPERIMENTAL | |
1131 | select I2C_ALGOBIT if FB_SAVAGE_I2C | |
1132 | select I2C if FB_SAVAGE_I2C | |
1133 | select FB_MODE_HELPERS | |
1134 | select FB_CFB_FILLRECT | |
1135 | select FB_CFB_COPYAREA | |
1136 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1137 | help |
1138 | This driver supports notebooks and computers with S3 Savage PCI/AGP | |
1139 | chips. | |
1140 | ||
1141 | Say Y if you have such a graphics card. | |
1142 | ||
1143 | To compile this driver as a module, choose M here; the module | |
1144 | will be called savagefb. | |
1145 | ||
1146 | config FB_SAVAGE_I2C | |
1147 | bool "Enable DDC2 Support" | |
1148 | depends on FB_SAVAGE | |
1149 | help | |
1150 | This enables I2C support for S3 Savage Chipsets. This is used | |
1151 | only for getting EDID information from the attached display | |
1152 | allowing for robust video mode handling and switching. | |
1153 | ||
1154 | Because fbdev-2.6 requires that drivers must be able to | |
1155 | independently validate video mode parameters, you should say Y | |
1156 | here. | |
1157 | ||
1158 | config FB_SAVAGE_ACCEL | |
1159 | bool "Enable Console Acceleration" | |
1160 | depends on FB_SAVAGE | |
1161 | default n | |
1162 | help | |
1163 | This option will compile in console acceleration support. If | |
1164 | the resulting framebuffer console has bothersome glitches, then | |
1165 | choose N here. | |
1166 | ||
1167 | config FB_SIS | |
544393fe | 1168 | tristate "SiS/XGI display support" |
1da177e4 LT |
1169 | depends on FB && PCI |
1170 | select FB_CFB_FILLRECT | |
1171 | select FB_CFB_COPYAREA | |
1172 | select FB_CFB_IMAGEBLIT | |
1da177e4 | 1173 | help |
544393fe TW |
1174 | This is the frame buffer device driver for the SiS 300, 315, 330 |
1175 | and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets. | |
1176 | Specs available at <http://www.sis.com> and <http://www.xgitech.com>. | |
1da177e4 LT |
1177 | |
1178 | To compile this driver as a module, choose M here; the module | |
1179 | will be called sisfb. | |
1180 | ||
1181 | config FB_SIS_300 | |
1182 | bool "SiS 300 series support" | |
1183 | depends on FB_SIS | |
1184 | help | |
1185 | Say Y here to support use of the SiS 300/305, 540, 630 and 730. | |
1186 | ||
1187 | config FB_SIS_315 | |
544393fe | 1188 | bool "SiS 315/330/340 series and XGI support" |
1da177e4 LT |
1189 | depends on FB_SIS |
1190 | help | |
544393fe TW |
1191 | Say Y here to support use of the SiS 315, 330 and 340 series |
1192 | (315/H/PRO, 55x, 650, 651, 740, 330, 661, 741, 760, 761) as well | |
1193 | as XGI V3XT, V5, V8 and Z7. | |
1da177e4 LT |
1194 | |
1195 | config FB_NEOMAGIC | |
1196 | tristate "NeoMagic display support" | |
1197 | depends on FB && PCI | |
1198 | select FB_MODE_HELPERS | |
1199 | select FB_CFB_FILLRECT | |
1200 | select FB_CFB_COPYAREA | |
1201 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1202 | help |
1203 | This driver supports notebooks with NeoMagic PCI chips. | |
1204 | Say Y if you have such a graphics card. | |
1205 | ||
1206 | To compile this driver as a module, choose M here: the | |
1207 | module will be called neofb. | |
1208 | ||
1209 | config FB_KYRO | |
1210 | tristate "IMG Kyro support" | |
1211 | depends on FB && PCI | |
1212 | select FB_CFB_FILLRECT | |
1213 | select FB_CFB_COPYAREA | |
1214 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1215 | help |
1216 | Say Y here if you have a STG4000 / Kyro / PowerVR 3 based | |
1217 | graphics board. | |
1218 | ||
1219 | To compile this driver as a module, choose M here: the | |
1220 | module will be called kyrofb. | |
1221 | ||
1222 | config FB_3DFX | |
1223 | tristate "3Dfx Banshee/Voodoo3 display support" | |
1224 | depends on FB && PCI | |
1225 | select FB_CFB_IMAGEBLIT | |
1226 | select FB_CFB_FILLRECT | |
1227 | select FB_CFB_COPYAREA | |
1da177e4 LT |
1228 | help |
1229 | This driver supports graphics boards with the 3Dfx Banshee/Voodoo3 | |
1230 | chips. Say Y if you have such a graphics board. | |
1231 | ||
1232 | To compile this driver as a module, choose M here: the | |
1233 | module will be called tdfxfb. | |
1234 | ||
1235 | config FB_3DFX_ACCEL | |
1236 | bool "3Dfx Banshee/Voodoo3 Acceleration functions (EXPERIMENTAL)" | |
1237 | depends on FB_3DFX && EXPERIMENTAL | |
1238 | ---help--- | |
1239 | This will compile the 3Dfx Banshee/Voodoo3 frame buffer device | |
1240 | with acceleration functions. | |
1241 | ||
1242 | ||
1243 | config FB_VOODOO1 | |
1244 | tristate "3Dfx Voodoo Graphics (sst1) support" | |
1245 | depends on FB && PCI | |
1246 | select FB_CFB_FILLRECT | |
1247 | select FB_CFB_COPYAREA | |
1248 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1249 | ---help--- |
1250 | Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or | |
1251 | Voodoo2 (cvg) based graphics card. | |
1252 | ||
1253 | To compile this driver as a module, choose M here: the | |
1254 | module will be called sstfb. | |
1255 | ||
1256 | WARNING: Do not use any application that uses the 3D engine | |
1257 | (namely glide) while using this driver. | |
1258 | Please read the <file:Documentation/fb/README-sstfb.txt> for supported | |
1259 | options and other important info support. | |
1260 | ||
9fa68eae KP |
1261 | config FB_CYBLA |
1262 | tristate "Cyberblade/i1 support" | |
44637a12 | 1263 | depends on FB && PCI && X86_32 && !64BIT |
9fa68eae | 1264 | select FB_CFB_IMAGEBLIT |
9fa68eae KP |
1265 | select VIDEO_SELECT |
1266 | ---help--- | |
1267 | This driver is supposed to support the Trident Cyberblade/i1 | |
1268 | graphics core integrated in the VIA VT8601A North Bridge, | |
1269 | also known as VIA Apollo PLE133. | |
1270 | ||
1271 | Status: | |
1272 | - Developed, tested and working on EPIA 5000 and EPIA 800. | |
1273 | - Does work reliable on all systems with CRT/LCD connected to | |
1274 | normal VGA ports. | |
1275 | - Should work on systems that do use the internal LCD port, but | |
1276 | this is absolutely not tested. | |
1277 | ||
1278 | Character imageblit, copyarea and rectangle fill are hw accelerated, | |
1279 | ypan scrolling is used by default. | |
1280 | ||
1281 | Please do read <file:Documentation/fb/cyblafb/*>. | |
1282 | ||
1283 | To compile this driver as a module, choose M here: the | |
1284 | module will be called cyblafb. | |
1285 | ||
1da177e4 LT |
1286 | config FB_TRIDENT |
1287 | tristate "Trident support" | |
1288 | depends on FB && PCI | |
1289 | select FB_CFB_FILLRECT | |
1290 | select FB_CFB_COPYAREA | |
1291 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1292 | ---help--- |
1293 | This driver is supposed to support graphics boards with the | |
1294 | Trident CyberXXXX/Image/CyberBlade chips mostly found in laptops | |
1295 | but also on some motherboards. For more information, read | |
1296 | <file:Documentation/fb/tridentfb.txt> | |
1297 | ||
9fa68eae KP |
1298 | Cyberblade/i1 support will be removed soon, use the cyblafb driver |
1299 | instead. | |
1300 | ||
1da177e4 LT |
1301 | Say Y if you have such a graphics board. |
1302 | ||
9fa68eae | 1303 | |
1da177e4 LT |
1304 | To compile this driver as a module, choose M here: the |
1305 | module will be called tridentfb. | |
1306 | ||
1307 | config FB_TRIDENT_ACCEL | |
1308 | bool "Trident Acceleration functions (EXPERIMENTAL)" | |
1309 | depends on FB_TRIDENT && EXPERIMENTAL | |
1310 | ---help--- | |
1311 | This will compile the Trident frame buffer device with | |
1312 | acceleration functions. | |
1313 | ||
1da177e4 LT |
1314 | config FB_PM3 |
1315 | tristate "Permedia3 support" | |
1316 | depends on FB && PCI && BROKEN | |
1317 | help | |
1318 | This is the frame buffer device driver for the 3DLabs Permedia3 | |
1319 | chipset, used in Formac ProFormance III, 3DLabs Oxygen VX1 & | |
1320 | similar boards, 3DLabs Permedia3 Create!, Appian Jeronimo 2000 | |
1321 | and maybe other boards. | |
1322 | ||
1da177e4 LT |
1323 | config FB_AU1100 |
1324 | bool "Au1100 LCD Driver" | |
1325 | depends on (FB = y) && EXPERIMENTAL && PCI && MIPS && MIPS_PB1100=y | |
1326 | ||
f95ec3c6 RB |
1327 | config FB_AU1200 |
1328 | bool "Au1200 LCD Driver" | |
1329 | depends on FB && MIPS && SOC_AU1200 | |
1330 | select FB_CFB_FILLRECT | |
1331 | select FB_CFB_COPYAREA | |
1332 | select FB_CFB_IMAGEBLIT | |
1333 | help | |
1334 | This is the framebuffer driver for the AMD Au1200 SOC. It can drive | |
1335 | various panels and CRTs by passing in kernel cmd line option | |
1336 | au1200fb:panel=<name>. | |
1337 | ||
1da177e4 LT |
1338 | source "drivers/video/geode/Kconfig" |
1339 | ||
1da177e4 LT |
1340 | config FB_FFB |
1341 | bool "Creator/Creator3D/Elite3D support" | |
1342 | depends on FB_SBUS && SPARC64 | |
1343 | select FB_CFB_COPYAREA | |
1344 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1345 | help |
1346 | This is the frame buffer device driver for the Creator, Creator3D, | |
1347 | and Elite3D graphics boards. | |
1348 | ||
1349 | config FB_TCX | |
1350 | bool "TCX (SS4/SS5 only) support" | |
1351 | depends on FB_SBUS | |
1352 | select FB_CFB_FILLRECT | |
1353 | select FB_CFB_COPYAREA | |
1354 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1355 | help |
1356 | This is the frame buffer device driver for the TCX 24/8bit frame | |
1357 | buffer. | |
1358 | ||
1359 | config FB_CG14 | |
1360 | bool "CGfourteen (SX) support" | |
1361 | depends on FB_SBUS | |
1362 | select FB_CFB_FILLRECT | |
1363 | select FB_CFB_COPYAREA | |
1364 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1365 | help |
1366 | This is the frame buffer device driver for the CGfourteen frame | |
1367 | buffer on Desktop SPARCsystems with the SX graphics option. | |
1368 | ||
1369 | config FB_P9100 | |
1370 | bool "P9100 (Sparcbook 3 only) support" | |
1371 | depends on FB_SBUS | |
1372 | select FB_CFB_FILLRECT | |
1373 | select FB_CFB_COPYAREA | |
1374 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1375 | help |
1376 | This is the frame buffer device driver for the P9100 card | |
1377 | supported on Sparcbook 3 machines. | |
1378 | ||
1379 | config FB_LEO | |
1380 | bool "Leo (ZX) support" | |
1381 | depends on FB_SBUS | |
1382 | select FB_CFB_FILLRECT | |
1383 | select FB_CFB_COPYAREA | |
1384 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1385 | help |
1386 | This is the frame buffer device driver for the SBUS-based Sun ZX | |
1387 | (leo) frame buffer cards. | |
1388 | ||
1389 | config FB_PCI | |
1390 | bool "PCI framebuffers" | |
0b57ee9e | 1391 | depends on (FB = y) && PCI && SPARC |
1da177e4 LT |
1392 | |
1393 | config FB_IGA | |
1394 | bool "IGA 168x display support" | |
1395 | depends on SPARC32 && FB_PCI | |
1396 | select FB_CFB_FILLRECT | |
1397 | select FB_CFB_COPYAREA | |
1398 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1399 | help |
1400 | This is the framebuffer device for the INTERGRAPHICS 1680 and | |
1401 | successor frame buffer cards. | |
1402 | ||
1403 | config FB_HIT | |
1404 | tristate "HD64461 Frame Buffer support" | |
1405 | depends on FB && HD64461 | |
1406 | select FB_CFB_FILLRECT | |
1407 | select FB_CFB_COPYAREA | |
1408 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1409 | help |
1410 | This is the frame buffer device driver for the Hitachi HD64461 LCD | |
1411 | frame buffer card. | |
1412 | ||
1413 | config FB_PMAG_AA | |
1414 | bool "PMAG-AA TURBOchannel framebuffer support" | |
a9350003 | 1415 | depends on (FB = y) && TC |
1da177e4 LT |
1416 | select FB_CFB_FILLRECT |
1417 | select FB_CFB_COPYAREA | |
1418 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1419 | help |
1420 | Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1) | |
1421 | used mainly in the MIPS-based DECstation series. | |
1422 | ||
1423 | config FB_PMAG_BA | |
1424 | bool "PMAG-BA TURBOchannel framebuffer support" | |
a9350003 | 1425 | depends on (FB = y) && TC |
1da177e4 LT |
1426 | select FB_CFB_FILLRECT |
1427 | select FB_CFB_COPYAREA | |
1428 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1429 | help |
1430 | Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8) | |
1431 | used mainly in the MIPS-based DECstation series. | |
1432 | ||
1433 | config FB_PMAGB_B | |
1434 | bool "PMAGB-B TURBOchannel framebuffer support" | |
a9350003 | 1435 | depends on (FB = y) && TC |
1da177e4 LT |
1436 | select FB_CFB_FILLRECT |
1437 | select FB_CFB_COPYAREA | |
1438 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1439 | help |
1440 | Support for the PMAGB-B TURBOchannel framebuffer card used mainly | |
1441 | in the MIPS-based DECstation series. The card is currently only | |
1442 | supported in 1280x1024x8 mode. | |
1443 | ||
1444 | config FB_MAXINE | |
1445 | bool "Maxine (Personal DECstation) onboard framebuffer support" | |
a9350003 | 1446 | depends on (FB = y) && MACH_DECSTATION |
1da177e4 LT |
1447 | select FB_CFB_FILLRECT |
1448 | select FB_CFB_COPYAREA | |
1449 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1450 | help |
1451 | Support for the onboard framebuffer (1024x768x8) in the Personal | |
1452 | DECstation series (Personal DECstation 5000/20, /25, /33, /50, | |
1453 | Codename "Maxine"). | |
1454 | ||
1455 | config FB_TX3912 | |
1456 | bool "TMPTX3912/PR31700 frame buffer support" | |
1457 | depends on (FB = y) && NINO | |
1458 | select FB_CFB_FILLRECT | |
1459 | select FB_CFB_COPYAREA | |
1460 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1461 | help |
1462 | The TX3912 is a Toshiba RISC processor based on the MIPS 3900 core | |
1463 | see <http://www.toshiba.com/taec/components/Generic/risc/tx3912.htm>. | |
1464 | ||
1465 | Say Y here to enable kernel support for the on-board framebuffer. | |
1466 | ||
1467 | config FB_G364 | |
b38817dd YY |
1468 | bool "G364 frame buffer support" |
1469 | depends on (FB = y) && (MIPS_MAGNUM_4000 || OLIVETTI_M700) | |
1da177e4 LT |
1470 | select FB_CFB_FILLRECT |
1471 | select FB_CFB_COPYAREA | |
1472 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1473 | help |
1474 | The G364 driver is the framebuffer used in MIPS Magnum 4000 and | |
1475 | Olivetti M700-10 systems. | |
1476 | ||
1477 | config FB_68328 | |
1478 | bool "Motorola 68328 native frame buffer support" | |
1479 | depends on FB && (M68328 || M68EZ328 || M68VZ328) | |
1480 | select FB_CFB_FILLRECT | |
1481 | select FB_CFB_COPYAREA | |
1482 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1483 | help |
1484 | Say Y here if you want to support the built-in frame buffer of | |
1485 | the Motorola 68328 CPU family. | |
1486 | ||
1487 | config FB_PXA | |
1488 | tristate "PXA LCD framebuffer support" | |
1489 | depends on FB && ARCH_PXA | |
1490 | select FB_CFB_FILLRECT | |
1491 | select FB_CFB_COPYAREA | |
1492 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1493 | ---help--- |
1494 | Frame buffer driver for the built-in LCD controller in the Intel | |
1495 | PXA2x0 processor. | |
1496 | ||
1497 | This driver is also available as a module ( = code which can be | |
1498 | inserted and removed from the running kernel whenever you want). The | |
74b4f042 | 1499 | module will be called pxafb. If you want to compile it as a module, |
1da177e4 LT |
1500 | say M here and read <file:Documentation/modules.txt>. |
1501 | ||
1502 | If unsure, say N. | |
1503 | ||
1da177e4 LT |
1504 | config FB_PXA_PARAMETERS |
1505 | bool "PXA LCD command line parameters" | |
1506 | default n | |
1507 | depends on FB_PXA | |
1508 | ---help--- | |
1509 | Enable the use of kernel command line or module parameters | |
1510 | to configure the physical properties of the LCD panel when | |
1511 | using the PXA LCD driver. | |
1512 | ||
1513 | This option allows you to override the panel parameters | |
1514 | supplied by the platform in order to support multiple | |
1515 | different models of flatpanel. If you will only be using a | |
1516 | single model of flatpanel then you can safely leave this | |
1517 | option disabled. | |
1518 | ||
1519 | <file:Documentation/fb/pxafb.txt> describes the available parameters. | |
1520 | ||
ecc41d5e RD |
1521 | config FB_W100 |
1522 | tristate "W100 frame buffer support" | |
1523 | depends on FB && PXA_SHARPSL | |
1524 | select FB_CFB_FILLRECT | |
1525 | select FB_CFB_COPYAREA | |
1526 | select FB_CFB_IMAGEBLIT | |
ecc41d5e RD |
1527 | ---help--- |
1528 | Frame buffer driver for the w100 as found on the Sharp SL-Cxx series. | |
1529 | ||
1530 | This driver is also available as a module ( = code which can be | |
1531 | inserted and removed from the running kernel whenever you want). The | |
74b4f042 | 1532 | module will be called w100fb. If you want to compile it as a module, |
ecc41d5e RD |
1533 | say M here and read <file:Documentation/modules.txt>. |
1534 | ||
1535 | If unsure, say N. | |
1da177e4 | 1536 | |
20fd5767 AP |
1537 | config FB_S3C2410 |
1538 | tristate "S3C2410 LCD framebuffer support" | |
1539 | depends on FB && ARCH_S3C2410 | |
1540 | select FB_CFB_FILLRECT | |
1541 | select FB_CFB_COPYAREA | |
1542 | select FB_CFB_IMAGEBLIT | |
20fd5767 AP |
1543 | ---help--- |
1544 | Frame buffer driver for the built-in LCD controller in the Samsung | |
1545 | S3C2410 processor. | |
1546 | ||
1547 | This driver is also available as a module ( = code which can be | |
1548 | inserted and removed from the running kernel whenever you want). The | |
1549 | module will be called s3c2410fb. If you want to compile it as a module, | |
1550 | say M here and read <file:Documentation/modules.txt>. | |
1551 | ||
1552 | If unsure, say N. | |
1553 | config FB_S3C2410_DEBUG | |
1554 | bool "S3C2410 lcd debug messages" | |
1555 | depends on FB_S3C2410 | |
1556 | help | |
1557 | Turn on debugging messages. Note that you can set/unset at run time | |
1558 | through sysfs | |
1559 | ||
36c9366e VW |
1560 | config FB_PNX4008_DUM |
1561 | tristate "Display Update Module support on Philips PNX4008 board" | |
1562 | depends on FB && ARCH_PNX4008 | |
1563 | ---help--- | |
1564 | Say Y here to enable support for PNX4008 Display Update Module (DUM) | |
1565 | ||
1566 | config FB_PNX4008_DUM_RGB | |
1567 | tristate "RGB Framebuffer support on Philips PNX4008 board" | |
1568 | depends on FB_PNX4008_DUM | |
1569 | select FB_CFB_FILLRECT | |
1570 | select FB_CFB_COPYAREA | |
1571 | select FB_CFB_IMAGEBLIT | |
1572 | ---help--- | |
1573 | Say Y here to enable support for PNX4008 RGB Framebuffer | |
1574 | ||
1da177e4 LT |
1575 | config FB_VIRTUAL |
1576 | tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)" | |
1577 | depends on FB | |
1578 | select FB_CFB_FILLRECT | |
1579 | select FB_CFB_COPYAREA | |
1580 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1581 | ---help--- |
1582 | This is a `virtual' frame buffer device. It operates on a chunk of | |
1583 | unswappable kernel memory instead of on the memory of a graphics | |
1584 | board. This means you cannot see any output sent to this frame | |
1585 | buffer device, while it does consume precious memory. The main use | |
1586 | of this frame buffer device is testing and debugging the frame | |
1587 | buffer subsystem. Do NOT enable it for normal systems! To protect | |
1588 | the innocent, it has to be enabled explicitly at boot time using the | |
1589 | kernel option `video=vfb:'. | |
1590 | ||
1591 | To compile this driver as a module, choose M here: the | |
1592 | module will be called vfb. | |
1593 | ||
1594 | If unsure, say N. | |
1595 | if VT | |
1596 | source "drivers/video/console/Kconfig" | |
1597 | endif | |
1598 | ||
1599 | if FB || SGI_NEWPORT_CONSOLE | |
1600 | source "drivers/video/logo/Kconfig" | |
1601 | endif | |
1602 | ||
1603 | if FB && SYSFS | |
1604 | source "drivers/video/backlight/Kconfig" | |
1605 | endif | |
1606 | ||
1607 | endmenu | |
1608 |