]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | # |
2 | # Video configuration | |
3 | # | |
4 | ||
5 | menu "Graphics support" | |
e25df120 | 6 | depends on HAS_IOMEM |
1da177e4 | 7 | |
179b025f RD |
8 | source "drivers/char/agp/Kconfig" |
9 | ||
c0e09200 | 10 | source "drivers/gpu/drm/Kconfig" |
ba70710e | 11 | |
b2f594fd AD |
12 | config VGASTATE |
13 | tristate | |
14 | default n | |
15 | ||
23b0f015 LY |
16 | config VIDEO_OUTPUT_CONTROL |
17 | tristate "Lowlevel video output switch controls" | |
23b0f015 LY |
18 | help |
19 | This framework adds support for low-level control of the video | |
20 | output switch. | |
21 | ||
179b025f | 22 | menuconfig FB |
1da177e4 LT |
23 | tristate "Support for frame buffer devices" |
24 | ---help--- | |
25 | The frame buffer device provides an abstraction for the graphics | |
26 | hardware. It represents the frame buffer of some video hardware and | |
27 | allows application software to access the graphics hardware through | |
28 | a well-defined interface, so the software doesn't need to know | |
29 | anything about the low-level (hardware register) stuff. | |
30 | ||
31 | Frame buffer devices work identically across the different | |
32 | architectures supported by Linux and make the implementation of | |
33 | application programs easier and more portable; at this point, an X | |
34 | server exists which uses the frame buffer device exclusively. | |
35 | On several non-X86 architectures, the frame buffer device is the | |
36 | only way to use the graphics hardware. | |
37 | ||
38 | The device is accessed through special device nodes, usually located | |
39 | in the /dev directory, i.e. /dev/fb*. | |
40 | ||
41 | You need an utility program called fbset to make full use of frame | |
42 | buffer devices. Please read <file:Documentation/fb/framebuffer.txt> | |
43 | and the Framebuffer-HOWTO at | |
44 | <http://www.tahallah.demon.co.uk/programming/prog.html> for more | |
45 | information. | |
46 | ||
47 | Say Y here and to the driver for your graphics board below if you | |
48 | are compiling a kernel for a non-x86 architecture. | |
49 | ||
50 | If you are compiling for the x86 architecture, you can say Y if you | |
51 | want to play with it, but it is not essential. Please note that | |
52 | running graphical applications that directly touch the hardware | |
53 | (e.g. an accelerated X server) and that are not frame buffer | |
54 | device-aware may cause unexpected results. If unsure, say N. | |
55 | ||
e0e34ef7 JS |
56 | config FIRMWARE_EDID |
57 | bool "Enable firmware EDID" | |
58 | depends on FB | |
59 | default n | |
60 | ---help--- | |
61 | This enables access to the EDID transferred from the firmware. | |
62 | On the i386, this is from the Video BIOS. Enable this if DDC/I2C | |
63 | transfers do not work for your driver and if you are using | |
64 | nvidiafb, i810fb or savagefb. | |
65 | ||
66 | In general, choosing Y for this option is safe. If you | |
67 | experience extremely long delays while booting before you get | |
68 | something on your display, try setting this to N. Matrox cards in | |
69 | combination with certain motherboards and monitors are known to | |
70 | suffer from this problem. | |
71 | ||
fc5891c8 DM |
72 | config FB_DDC |
73 | tristate | |
e0e34ef7 JS |
74 | depends on FB |
75 | select I2C_ALGOBIT | |
76 | select I2C | |
fc5891c8 DM |
77 | default n |
78 | ||
4d31a2b7 MJ |
79 | config FB_BOOT_VESA_SUPPORT |
80 | bool | |
81 | depends on FB | |
82 | default n | |
83 | ---help--- | |
84 | If true, at least one selected framebuffer driver can take advantage | |
85 | of VESA video modes set at an early boot stage via the vga= parameter. | |
86 | ||
1da177e4 LT |
87 | config FB_CFB_FILLRECT |
88 | tristate | |
89 | depends on FB | |
90 | default n | |
91 | ---help--- | |
92 | Include the cfb_fillrect function for generic software rectangle | |
93 | filling. This is used by drivers that don't provide their own | |
94 | (accelerated) version. | |
95 | ||
96 | config FB_CFB_COPYAREA | |
97 | tristate | |
98 | depends on FB | |
99 | default n | |
100 | ---help--- | |
101 | Include the cfb_copyarea function for generic software area copying. | |
102 | This is used by drivers that don't provide their own (accelerated) | |
103 | version. | |
104 | ||
105 | config FB_CFB_IMAGEBLIT | |
106 | tristate | |
107 | depends on FB | |
108 | default n | |
109 | ---help--- | |
110 | Include the cfb_imageblit function for generic software image | |
111 | blitting. This is used by drivers that don't provide their own | |
112 | (accelerated) version. | |
113 | ||
779121e9 PP |
114 | config FB_CFB_REV_PIXELS_IN_BYTE |
115 | bool | |
116 | depends on FB | |
117 | default n | |
118 | ---help--- | |
119 | Allow generic frame-buffer functions to work on displays with 1, 2 | |
120 | and 4 bits per pixel depths which has opposite order of pixels in | |
121 | byte order to bytes in long order. | |
122 | ||
68648ed1 AD |
123 | config FB_SYS_FILLRECT |
124 | tristate | |
125 | depends on FB | |
126 | default n | |
127 | ---help--- | |
128 | Include the sys_fillrect function for generic software rectangle | |
129 | filling. This is used by drivers that don't provide their own | |
130 | (accelerated) version and the framebuffer is in system RAM. | |
131 | ||
132 | config FB_SYS_COPYAREA | |
133 | tristate | |
134 | depends on FB | |
135 | default n | |
136 | ---help--- | |
137 | Include the sys_copyarea function for generic software area copying. | |
138 | This is used by drivers that don't provide their own (accelerated) | |
139 | version and the framebuffer is in system RAM. | |
140 | ||
141 | config FB_SYS_IMAGEBLIT | |
142 | tristate | |
143 | depends on FB | |
144 | default n | |
145 | ---help--- | |
146 | Include the sys_imageblit function for generic software image | |
147 | blitting. This is used by drivers that don't provide their own | |
148 | (accelerated) version and the framebuffer is in system RAM. | |
149 | ||
e4c690e0 AV |
150 | menuconfig FB_FOREIGN_ENDIAN |
151 | bool "Framebuffer foreign endianness support" | |
152 | depends on FB | |
153 | ---help--- | |
154 | This menu will let you enable support for the framebuffers with | |
155 | non-native endianness (e.g. Little-Endian framebuffer on a | |
156 | Big-Endian machine). Most probably you don't have such hardware, | |
157 | so it's safe to say "n" here. | |
158 | ||
159 | choice | |
160 | prompt "Choice endianness support" | |
161 | depends on FB_FOREIGN_ENDIAN | |
162 | ||
163 | config FB_BOTH_ENDIAN | |
164 | bool "Support for Big- and Little-Endian framebuffers" | |
165 | ||
166 | config FB_BIG_ENDIAN | |
167 | bool "Support for Big-Endian framebuffers only" | |
168 | ||
169 | config FB_LITTLE_ENDIAN | |
170 | bool "Support for Little-Endian framebuffers only" | |
171 | ||
172 | endchoice | |
173 | ||
09aaf268 AD |
174 | config FB_SYS_FOPS |
175 | tristate | |
176 | depends on FB | |
177 | default n | |
178 | ||
60b59bea JK |
179 | config FB_DEFERRED_IO |
180 | bool | |
181 | depends on FB | |
60b59bea | 182 | |
0e27aa3d JK |
183 | config FB_HECUBA |
184 | tristate | |
185 | depends on FB | |
186 | depends on FB_DEFERRED_IO | |
187 | ||
a268422d OZ |
188 | config FB_SVGALIB |
189 | tristate | |
190 | depends on FB | |
191 | default n | |
192 | ---help--- | |
193 | Common utility functions useful to fbdev drivers of VGA-based | |
194 | cards. | |
195 | ||
1da177e4 LT |
196 | config FB_MACMODES |
197 | tristate | |
198 | depends on FB | |
199 | default n | |
200 | ||
5474c120 | 201 | config FB_BACKLIGHT |
4b755999 MH |
202 | bool |
203 | depends on FB | |
204 | select BACKLIGHT_LCD_SUPPORT | |
205 | select BACKLIGHT_CLASS_DEVICE | |
206 | default n | |
5474c120 | 207 | |
1da177e4 LT |
208 | config FB_MODE_HELPERS |
209 | bool "Enable Video Mode Handling Helpers" | |
210 | depends on FB | |
211 | default n | |
212 | ---help--- | |
213 | This enables functions for handling video modes using the | |
214 | Generalized Timing Formula and the EDID parser. A few drivers rely | |
215 | on this feature such as the radeonfb, rivafb, and the i810fb. If | |
216 | your driver does not take advantage of this feature, choosing Y will | |
217 | just increase the kernel size by about 5K. | |
218 | ||
219 | config FB_TILEBLITTING | |
220 | bool "Enable Tile Blitting Support" | |
221 | depends on FB | |
222 | default n | |
223 | ---help--- | |
224 | This enables tile blitting. Tile blitting is a drawing technique | |
225 | where the screen is divided into rectangular sections (tiles), whereas | |
226 | the standard blitting divides the screen into pixels. Because the | |
227 | default drawing element is a tile, drawing functions will be passed | |
228 | parameters in terms of number of tiles instead of number of pixels. | |
229 | For example, to draw a single character, instead of using bitmaps, | |
230 | an index to an array of bitmaps will be used. To clear or move a | |
231 | rectangular section of a screen, the rectangle will be described in | |
232 | terms of number of tiles in the x- and y-axis. | |
233 | ||
234 | This is particularly important to one driver, matroxfb. If | |
235 | unsure, say N. | |
236 | ||
10ccaf4b | 237 | comment "Frame buffer hardware drivers" |
e0e34ef7 JS |
238 | depends on FB |
239 | ||
1da177e4 LT |
240 | config FB_CIRRUS |
241 | tristate "Cirrus Logic support" | |
242 | depends on FB && (ZORRO || PCI) | |
243 | select FB_CFB_FILLRECT | |
244 | select FB_CFB_COPYAREA | |
245 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
246 | ---help--- |
247 | This enables support for Cirrus Logic GD542x/543x based boards on | |
248 | Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum. | |
249 | ||
250 | If you have a PCI-based system, this enables support for these | |
251 | chips: GD-543x, GD-544x, GD-5480. | |
252 | ||
253 | Please read the file <file:Documentation/fb/cirrusfb.txt>. | |
254 | ||
255 | Say N unless you have such a graphics board or plan to get one | |
256 | before you next recompile the kernel. | |
257 | ||
258 | config FB_PM2 | |
259 | tristate "Permedia2 support" | |
260 | depends on FB && ((AMIGA && BROKEN) || PCI) | |
261 | select FB_CFB_FILLRECT | |
262 | select FB_CFB_COPYAREA | |
263 | select FB_CFB_IMAGEBLIT | |
1da177e4 | 264 | help |
4edad7f0 KH |
265 | This is the frame buffer device driver for cards based on |
266 | the 3D Labs Permedia, Permedia 2 and Permedia 2V chips. | |
267 | The driver was tested on the following cards: | |
268 | Diamond FireGL 1000 PRO AGP | |
269 | ELSA Gloria Synergy PCI | |
270 | Appian Jeronimo PRO (both heads) PCI | |
271 | 3DLabs Oxygen ACX aka EONtronics Picasso P2 PCI | |
272 | Techsource Raptor GFX-8P (aka Sun PGX-32) on SPARC | |
273 | ASK Graphic Blaster Exxtreme AGP | |
274 | ||
275 | To compile this driver as a module, choose M here: the | |
276 | module will be called pm2fb. | |
1da177e4 LT |
277 | |
278 | config FB_PM2_FIFO_DISCONNECT | |
279 | bool "enable FIFO disconnect feature" | |
280 | depends on FB_PM2 && PCI | |
281 | help | |
4edad7f0 | 282 | Support the Permedia2 FIFO disconnect feature. |
1da177e4 LT |
283 | |
284 | config FB_ARMCLCD | |
285 | tristate "ARM PrimeCell PL110 support" | |
286 | depends on FB && ARM && ARM_AMBA | |
287 | select FB_CFB_FILLRECT | |
288 | select FB_CFB_COPYAREA | |
289 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
290 | help |
291 | This framebuffer device driver is for the ARM PrimeCell PL110 | |
292 | Colour LCD controller. ARM PrimeCells provide the building | |
293 | blocks for System on a Chip devices. | |
294 | ||
295 | If you want to compile this as a module (=code which can be | |
296 | inserted into and removed from the running kernel), say M | |
39f5fb30 | 297 | here and read <file:Documentation/kbuild/modules.txt>. The module |
1da177e4 LT |
298 | will be called amba-clcd. |
299 | ||
903e2bbd MS |
300 | choice |
301 | ||
302 | depends on FB_ARMCLCD && (ARCH_LH7A40X || ARCH_LH7952X) | |
303 | prompt "LCD Panel" | |
304 | default FB_ARMCLCD_SHARP_LQ035Q7DB02 | |
305 | ||
306 | config FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT | |
307 | bool "LogicPD LCD 3.5\" QVGA w/HRTFT IC" | |
308 | help | |
309 | This is an implementation of the Sharp LQ035Q7DB02, a 3.5" | |
cab00891 | 310 | color QVGA, HRTFT panel. The LogicPD device includes |
903e2bbd MS |
311 | an integrated HRTFT controller IC. |
312 | The native resolution is 240x320. | |
313 | ||
314 | config FB_ARMCLCD_SHARP_LQ057Q3DC02 | |
315 | bool "LogicPD LCD 5.7\" QVGA" | |
316 | help | |
317 | This is an implementation of the Sharp LQ057Q3DC02, a 5.7" | |
318 | color QVGA, TFT panel. The LogicPD device includes an | |
319 | The native resolution is 320x240. | |
320 | ||
321 | config FB_ARMCLCD_SHARP_LQ64D343 | |
322 | bool "LogicPD LCD 6.4\" VGA" | |
323 | help | |
324 | This is an implementation of the Sharp LQ64D343, a 6.4" | |
325 | color VGA, TFT panel. The LogicPD device includes an | |
326 | The native resolution is 640x480. | |
327 | ||
328 | config FB_ARMCLCD_SHARP_LQ10D368 | |
329 | bool "LogicPD LCD 10.4\" VGA" | |
330 | help | |
331 | This is an implementation of the Sharp LQ10D368, a 10.4" | |
332 | color VGA, TFT panel. The LogicPD device includes an | |
333 | The native resolution is 640x480. | |
334 | ||
335 | ||
336 | config FB_ARMCLCD_SHARP_LQ121S1DG41 | |
337 | bool "LogicPD LCD 12.1\" SVGA" | |
338 | help | |
339 | This is an implementation of the Sharp LQ121S1DG41, a 12.1" | |
340 | color SVGA, TFT panel. The LogicPD device includes an | |
341 | The native resolution is 800x600. | |
342 | ||
343 | This panel requires a clock rate may be an integer fraction | |
344 | of the base LCDCLK frequency. The driver will select the | |
345 | highest frequency available that is lower than the maximum | |
346 | allowed. The panel may flicker if the clock rate is | |
347 | slower than the recommended minimum. | |
348 | ||
349 | config FB_ARMCLCD_AUO_A070VW01_WIDE | |
350 | bool "AU Optronics A070VW01 LCD 7.0\" WIDE" | |
351 | help | |
352 | This is an implementation of the AU Optronics, a 7.0" | |
353 | WIDE Color. The native resolution is 234x480. | |
354 | ||
355 | config FB_ARMCLCD_HITACHI | |
356 | bool "Hitachi Wide Screen 800x480" | |
357 | help | |
358 | This is an implementation of the Hitachi 800x480. | |
359 | ||
360 | endchoice | |
361 | ||
362 | ||
1da177e4 LT |
363 | config FB_ACORN |
364 | bool "Acorn VIDC support" | |
365 | depends on (FB = y) && ARM && (ARCH_ACORN || ARCH_CLPS7500) | |
366 | select FB_CFB_FILLRECT | |
367 | select FB_CFB_COPYAREA | |
368 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
369 | help |
370 | This is the frame buffer device driver for the Acorn VIDC graphics | |
371 | hardware found in Acorn RISC PCs and other ARM-based machines. If | |
372 | unsure, say N. | |
373 | ||
374 | config FB_CLPS711X | |
375 | bool "CLPS711X LCD support" | |
376 | depends on (FB = y) && ARM && ARCH_CLPS711X | |
377 | select FB_CFB_FILLRECT | |
378 | select FB_CFB_COPYAREA | |
379 | select FB_CFB_IMAGEBLIT | |
e65c0850 RD |
380 | help |
381 | Say Y to enable the Framebuffer driver for the CLPS7111 and | |
382 | EP7212 processors. | |
1da177e4 LT |
383 | |
384 | config FB_SA1100 | |
385 | bool "SA-1100 LCD support" | |
386 | depends on (FB = y) && ARM && ARCH_SA1100 | |
387 | select FB_CFB_FILLRECT | |
388 | select FB_CFB_COPYAREA | |
389 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
390 | help |
391 | This is a framebuffer device for the SA-1100 LCD Controller. | |
392 | See <http://www.linux-fbdev.org/> for information on framebuffer | |
393 | devices. | |
394 | ||
395 | If you plan to use the LCD display with your SA-1100 system, say | |
396 | Y here. | |
397 | ||
7c2f891c SH |
398 | config FB_IMX |
399 | tristate "Motorola i.MX LCD support" | |
400 | depends on FB && ARM && ARCH_IMX | |
401 | select FB_CFB_FILLRECT | |
402 | select FB_CFB_COPYAREA | |
403 | select FB_CFB_IMAGEBLIT | |
7c2f891c | 404 | |
1da177e4 LT |
405 | config FB_CYBER2000 |
406 | tristate "CyberPro 2000/2010/5000 support" | |
407 | depends on FB && PCI && (BROKEN || !SPARC64) | |
408 | select FB_CFB_FILLRECT | |
409 | select FB_CFB_COPYAREA | |
410 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
411 | help |
412 | This enables support for the Integraphics CyberPro 20x0 and 5000 | |
413 | VGA chips used in the Rebel.com Netwinder and other machines. | |
414 | Say Y if you have a NetWinder or a graphics card containing this | |
415 | device, otherwise say N. | |
416 | ||
417 | config FB_APOLLO | |
418 | bool | |
419 | depends on (FB = y) && APOLLO | |
420 | default y | |
421 | select FB_CFB_FILLRECT | |
422 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
423 | |
424 | config FB_Q40 | |
425 | bool | |
426 | depends on (FB = y) && Q40 | |
427 | default y | |
428 | select FB_CFB_FILLRECT | |
429 | select FB_CFB_COPYAREA | |
430 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
431 | |
432 | config FB_AMIGA | |
433 | tristate "Amiga native chipset support" | |
434 | depends on FB && AMIGA | |
1da177e4 LT |
435 | help |
436 | This is the frame buffer device driver for the builtin graphics | |
437 | chipset found in Amigas. | |
438 | ||
439 | To compile this driver as a module, choose M here: the | |
440 | module will be called amifb. | |
441 | ||
442 | config FB_AMIGA_OCS | |
443 | bool "Amiga OCS chipset support" | |
444 | depends on FB_AMIGA | |
445 | help | |
446 | This enables support for the original Agnus and Denise video chips, | |
447 | found in the Amiga 1000 and most A500's and A2000's. If you intend | |
448 | to run Linux on any of these systems, say Y; otherwise say N. | |
449 | ||
450 | config FB_AMIGA_ECS | |
451 | bool "Amiga ECS chipset support" | |
452 | depends on FB_AMIGA | |
453 | help | |
454 | This enables support for the Enhanced Chip Set, found in later | |
455 | A500's, later A2000's, the A600, the A3000, the A3000T and CDTV. If | |
456 | you intend to run Linux on any of these systems, say Y; otherwise | |
457 | say N. | |
458 | ||
459 | config FB_AMIGA_AGA | |
460 | bool "Amiga AGA chipset support" | |
461 | depends on FB_AMIGA | |
462 | help | |
463 | This enables support for the Advanced Graphics Architecture (also | |
464 | known as the AGA or AA) Chip Set, found in the A1200, A4000, A4000T | |
465 | and CD32. If you intend to run Linux on any of these systems, say Y; | |
466 | otherwise say N. | |
467 | ||
1da177e4 LT |
468 | config FB_FM2 |
469 | bool "Amiga FrameMaster II/Rainbow II support" | |
470 | depends on (FB = y) && ZORRO | |
471 | select FB_CFB_FILLRECT | |
472 | select FB_CFB_COPYAREA | |
473 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
474 | help |
475 | This is the frame buffer device driver for the Amiga FrameMaster | |
476 | card from BSC (exhibited 1992 but not shipped as a CBM product). | |
477 | ||
1154ea7d JK |
478 | config FB_ARC |
479 | tristate "Arc Monochrome LCD board support" | |
480 | depends on FB && X86 | |
922e6f9a AD |
481 | select FB_SYS_FILLRECT |
482 | select FB_SYS_COPYAREA | |
483 | select FB_SYS_IMAGEBLIT | |
d9a05f18 | 484 | select FB_SYS_FOPS |
1154ea7d JK |
485 | help |
486 | This enables support for the Arc Monochrome LCD board. The board | |
487 | is based on the KS-108 lcd controller and is typically a matrix | |
488 | of 2*n chips. This driver was tested with a 128x64 panel. This | |
489 | driver supports it for use with x86 SBCs through a 16 bit GPIO | |
09509603 | 490 | interface (8 bit data, 8 bit control). If you anticipate using |
1154ea7d JK |
491 | this driver, say Y or M; otherwise say N. You must specify the |
492 | GPIO IO address to be used for setting control and data. | |
493 | ||
1da177e4 LT |
494 | config FB_ATARI |
495 | bool "Atari native chipset support" | |
a1005012 MS |
496 | depends on (FB = y) && ATARI |
497 | select FB_CFB_FILLRECT | |
498 | select FB_CFB_COPYAREA | |
499 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
500 | help |
501 | This is the frame buffer device driver for the builtin graphics | |
502 | chipset found in Ataris. | |
503 | ||
504 | config FB_OF | |
505 | bool "Open Firmware frame buffer device support" | |
bed59275 | 506 | depends on (FB = y) && (PPC64 || PPC_OF) && (!PPC_PSERIES || PCI) |
1da177e4 LT |
507 | select FB_CFB_FILLRECT |
508 | select FB_CFB_COPYAREA | |
509 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
510 | select FB_MACMODES |
511 | help | |
512 | Say Y if you want support with Open Firmware for your graphics | |
513 | board. | |
514 | ||
515 | config FB_CONTROL | |
516 | bool "Apple \"control\" display support" | |
a04b61d3 | 517 | depends on (FB = y) && PPC_PMAC && PPC32 |
1da177e4 LT |
518 | select FB_CFB_FILLRECT |
519 | select FB_CFB_COPYAREA | |
520 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
521 | select FB_MACMODES |
522 | help | |
523 | This driver supports a frame buffer for the graphics adapter in the | |
524 | Power Macintosh 7300 and others. | |
525 | ||
526 | config FB_PLATINUM | |
527 | bool "Apple \"platinum\" display support" | |
a04b61d3 | 528 | depends on (FB = y) && PPC_PMAC && PPC32 |
1da177e4 LT |
529 | select FB_CFB_FILLRECT |
530 | select FB_CFB_COPYAREA | |
531 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
532 | select FB_MACMODES |
533 | help | |
534 | This driver supports a frame buffer for the "platinum" graphics | |
535 | adapter in some Power Macintoshes. | |
536 | ||
537 | config FB_VALKYRIE | |
538 | bool "Apple \"valkyrie\" display support" | |
a04b61d3 | 539 | depends on (FB = y) && (MAC || (PPC_PMAC && PPC32)) |
1da177e4 LT |
540 | select FB_CFB_FILLRECT |
541 | select FB_CFB_COPYAREA | |
542 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
543 | select FB_MACMODES |
544 | help | |
545 | This driver supports a frame buffer for the "valkyrie" graphics | |
546 | adapter in some Power Macintoshes. | |
547 | ||
548 | config FB_CT65550 | |
549 | bool "Chips 65550 display support" | |
0f8c0234 | 550 | depends on (FB = y) && PPC32 && PCI |
1da177e4 LT |
551 | select FB_CFB_FILLRECT |
552 | select FB_CFB_COPYAREA | |
553 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
554 | help |
555 | This is the frame buffer device driver for the Chips & Technologies | |
556 | 65550 graphics chip in PowerBooks. | |
557 | ||
558 | config FB_ASILIANT | |
e65c0850 | 559 | bool "Asiliant (Chips) 69000 display support" |
1da177e4 LT |
560 | depends on (FB = y) && PCI |
561 | select FB_CFB_FILLRECT | |
562 | select FB_CFB_COPYAREA | |
563 | select FB_CFB_IMAGEBLIT | |
4de0b1ee AD |
564 | help |
565 | This is the frame buffer device driver for the Asiliant 69030 chipset | |
1da177e4 LT |
566 | |
567 | config FB_IMSTT | |
568 | bool "IMS Twin Turbo display support" | |
569 | depends on (FB = y) && PCI | |
570 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
571 | select FB_MACMODES if PPC |
572 | help | |
573 | The IMS Twin Turbo is a PCI-based frame buffer card bundled with | |
574 | many Macintosh and compatible computers. | |
575 | ||
1da177e4 LT |
576 | config FB_VGA16 |
577 | tristate "VGA 16-color graphics support" | |
578 | depends on FB && (X86 || PPC) | |
579 | select FB_CFB_FILLRECT | |
580 | select FB_CFB_COPYAREA | |
581 | select FB_CFB_IMAGEBLIT | |
b2f594fd | 582 | select VGASTATE |
d60d2d8a | 583 | select FONT_8x16 if FRAMEBUFFER_CONSOLE |
1da177e4 LT |
584 | help |
585 | This is the frame buffer device driver for VGA 16 color graphic | |
586 | cards. Say Y if you have such a card. | |
587 | ||
588 | To compile this driver as a module, choose M here: the | |
589 | module will be called vga16fb. | |
590 | ||
e9fa7c43 MH |
591 | config FB_BF54X_LQ043 |
592 | tristate "SHARP LQ043 TFT LCD (BF548 EZKIT)" | |
e7a05aa9 | 593 | depends on FB && (BF54x) && !BF542 |
e9fa7c43 MH |
594 | select FB_CFB_FILLRECT |
595 | select FB_CFB_COPYAREA | |
596 | select FB_CFB_IMAGEBLIT | |
597 | help | |
598 | This is the framebuffer device driver for a SHARP LQ043T1DG01 TFT LCD | |
599 | ||
99eeed47 MH |
600 | config FB_BFIN_T350MCQB |
601 | tristate "Varitronix COG-T350MCQB TFT LCD display (BF527 EZKIT)" | |
602 | depends on FB && BLACKFIN | |
603 | select BFIN_GPTIMERS | |
604 | select FB_CFB_FILLRECT | |
605 | select FB_CFB_COPYAREA | |
606 | select FB_CFB_IMAGEBLIT | |
607 | help | |
608 | This is the framebuffer device driver for a Varitronix VL-PS-COG-T350MCQB-01 display TFT LCD | |
609 | This display is a QVGA 320x240 24-bit RGB display interfaced by an 8-bit wide PPI | |
610 | It uses PPI[0..7] PPI_FS1, PPI_FS2 and PPI_CLK. | |
611 | ||
612 | ||
1da177e4 LT |
613 | config FB_STI |
614 | tristate "HP STI frame buffer device support" | |
615 | depends on FB && PARISC | |
616 | select FB_CFB_FILLRECT | |
617 | select FB_CFB_COPYAREA | |
618 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
619 | default y |
620 | ---help--- | |
621 | STI refers to the HP "Standard Text Interface" which is a set of | |
622 | BIOS routines contained in a ROM chip in HP PA-RISC based machines. | |
623 | Enabling this option will implement the linux framebuffer device | |
624 | using calls to the STI BIOS routines for initialisation. | |
625 | ||
626 | If you enable this option, you will get a planar framebuffer device | |
627 | /dev/fb which will work on the most common HP graphic cards of the | |
628 | NGLE family, including the artist chips (in the 7xx and Bxxx series), | |
629 | HCRX, HCRX24, CRX, CRX24 and VisEG series. | |
630 | ||
631 | It is safe to enable this option, so you should probably say "Y". | |
632 | ||
633 | config FB_MAC | |
634 | bool "Generic Macintosh display support" | |
635 | depends on (FB = y) && MAC | |
636 | select FB_CFB_FILLRECT | |
637 | select FB_CFB_COPYAREA | |
638 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
639 | select FB_MACMODES |
640 | ||
1da177e4 LT |
641 | config FB_HP300 |
642 | bool | |
ad7e484f | 643 | depends on (FB = y) && DIO |
1da177e4 | 644 | select FB_CFB_IMAGEBLIT |
1da177e4 LT |
645 | default y |
646 | ||
647 | config FB_TGA | |
86c6f7d0 MR |
648 | tristate "TGA/SFB+ framebuffer support" |
649 | depends on FB && (ALPHA || TC) | |
1da177e4 LT |
650 | select FB_CFB_FILLRECT |
651 | select FB_CFB_COPYAREA | |
652 | select FB_CFB_IMAGEBLIT | |
1c667682 | 653 | select BITREVERSE |
86c6f7d0 MR |
654 | ---help--- |
655 | This is the frame buffer device driver for generic TGA and SFB+ | |
656 | graphic cards. These include DEC ZLXp-E1, -E2 and -E3 PCI cards, | |
657 | also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3 | |
658 | TURBOchannel cards, also known as PMAGD-A, -B and -C. | |
659 | ||
660 | Due to hardware limitations ZLX-E2 and E3 cards are not supported | |
661 | for DECstation 5000/200 systems. Additionally due to firmware | |
662 | limitations these cards may cause troubles with booting DECstation | |
663 | 5000/240 and /260 systems, but are fully supported under Linux if | |
664 | you manage to get it going. ;-) | |
665 | ||
666 | Say Y if you have one of those. | |
1da177e4 | 667 | |
8bdb3a2d MJ |
668 | config FB_UVESA |
669 | tristate "Userspace VESA VGA graphics support" | |
670 | depends on FB && CONNECTOR | |
671 | select FB_CFB_FILLRECT | |
672 | select FB_CFB_COPYAREA | |
673 | select FB_CFB_IMAGEBLIT | |
674 | select FB_MODE_HELPERS | |
675 | help | |
676 | This is the frame buffer driver for generic VBE 2.0 compliant | |
677 | graphic cards. It can also take advantage of VBE 3.0 features, | |
678 | such as refresh rate adjustment. | |
679 | ||
680 | This driver generally provides more features than vesafb but | |
681 | requires a userspace helper application called 'v86d'. See | |
682 | <file:Documentation/fb/uvesafb.txt> for more information. | |
683 | ||
684 | If unsure, say N. | |
685 | ||
1da177e4 LT |
686 | config FB_VESA |
687 | bool "VESA VGA graphics support" | |
0d078f6f | 688 | depends on (FB = y) && X86 |
1da177e4 LT |
689 | select FB_CFB_FILLRECT |
690 | select FB_CFB_COPYAREA | |
691 | select FB_CFB_IMAGEBLIT | |
4d31a2b7 | 692 | select FB_BOOT_VESA_SUPPORT |
1da177e4 LT |
693 | help |
694 | This is the frame buffer device driver for generic VESA 2.0 | |
695 | compliant graphic cards. The older VESA 1.2 cards are not supported. | |
696 | You will get a boot time penguin logo at no additional cost. Please | |
697 | read <file:Documentation/fb/vesafb.txt>. If unsure, say Y. | |
698 | ||
7c83172b HY |
699 | config FB_EFI |
700 | bool "EFI-based Framebuffer Support" | |
b64ef8af | 701 | depends on (FB = y) && X86 && EFI |
90b4f9ac EH |
702 | select FB_CFB_FILLRECT |
703 | select FB_CFB_COPYAREA | |
704 | select FB_CFB_IMAGEBLIT | |
705 | help | |
7c08c9ae PJ |
706 | This is the EFI frame buffer device driver. If the firmware on |
707 | your platform is EFI 1.10 or UEFI 2.0, select Y to add support for | |
708 | using the EFI framebuffer as your console. | |
90b4f9ac | 709 | |
0e27aa3d JK |
710 | config FB_N411 |
711 | tristate "N411 Apollo/Hecuba devkit support" | |
aad09e51 | 712 | depends on FB && X86 && MMU |
d6774935 AD |
713 | select FB_SYS_FILLRECT |
714 | select FB_SYS_COPYAREA | |
715 | select FB_SYS_IMAGEBLIT | |
28d4564b | 716 | select FB_SYS_FOPS |
aad09e51 | 717 | select FB_DEFERRED_IO |
0e27aa3d | 718 | select FB_HECUBA |
aad09e51 | 719 | help |
0e27aa3d JK |
720 | This enables support for the Apollo display controller in its |
721 | Hecuba form using the n411 devkit. | |
aad09e51 | 722 | |
1da177e4 LT |
723 | config FB_HGA |
724 | tristate "Hercules mono graphics support" | |
725 | depends on FB && X86 | |
726 | select FB_CFB_FILLRECT | |
727 | select FB_CFB_COPYAREA | |
728 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
729 | help |
730 | Say Y here if you have a Hercules mono graphics card. | |
731 | ||
732 | To compile this driver as a module, choose M here: the | |
733 | module will be called hgafb. | |
734 | ||
735 | As this card technology is 15 years old, most people will answer N | |
736 | here. | |
737 | ||
738 | config FB_HGA_ACCEL | |
739 | bool "Hercules mono Acceleration functions (EXPERIMENTAL)" | |
740 | depends on FB_HGA && EXPERIMENTAL | |
741 | ---help--- | |
742 | This will compile the Hercules mono graphics with | |
743 | acceleration functions. | |
744 | ||
1da177e4 LT |
745 | config FB_SGIVW |
746 | tristate "SGI Visual Workstation framebuffer support" | |
747 | depends on FB && X86_VISWS | |
748 | select FB_CFB_FILLRECT | |
749 | select FB_CFB_COPYAREA | |
750 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
751 | help |
752 | SGI Visual Workstation support for framebuffer graphics. | |
753 | ||
754 | config FB_GBE | |
755 | bool "SGI Graphics Backend frame buffer support" | |
756 | depends on (FB = y) && (SGI_IP32 || X86_VISWS) | |
757 | select FB_CFB_FILLRECT | |
758 | select FB_CFB_COPYAREA | |
759 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
760 | help |
761 | This is the frame buffer device driver for SGI Graphics Backend. | |
762 | This chip is used in SGI O2 and Visual Workstation 320/540. | |
763 | ||
764 | config FB_GBE_MEM | |
765 | int "Video memory size in MB" | |
766 | depends on FB_GBE | |
80c410dc | 767 | default 4 |
1da177e4 LT |
768 | help |
769 | This is the amount of memory reserved for the framebuffer, | |
770 | which can be any value between 1MB and 8MB. | |
771 | ||
1a571986 MF |
772 | config FB_SBUS |
773 | bool "SBUS and UPA framebuffers" | |
0b57ee9e | 774 | depends on (FB = y) && SPARC |
1a571986 MF |
775 | help |
776 | Say Y if you want support for SBUS or UPA based frame buffer device. | |
777 | ||
1da177e4 LT |
778 | config FB_BW2 |
779 | bool "BWtwo support" | |
e019630e | 780 | depends on (FB = y) && (SPARC && FB_SBUS) |
1da177e4 LT |
781 | select FB_CFB_FILLRECT |
782 | select FB_CFB_COPYAREA | |
783 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
784 | help |
785 | This is the frame buffer device driver for the BWtwo frame buffer. | |
786 | ||
787 | config FB_CG3 | |
788 | bool "CGthree support" | |
e019630e | 789 | depends on (FB = y) && (SPARC && FB_SBUS) |
1a571986 | 790 | select FB_CFB_FILLRECT |
1da177e4 LT |
791 | select FB_CFB_COPYAREA |
792 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
793 | help |
794 | This is the frame buffer device driver for the CGthree frame buffer. | |
795 | ||
796 | config FB_CG6 | |
797 | bool "CGsix (GX,TurboGX) support" | |
e019630e | 798 | depends on (FB = y) && (SPARC && FB_SBUS) |
1da177e4 LT |
799 | select FB_CFB_COPYAREA |
800 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
801 | help |
802 | This is the frame buffer device driver for the CGsix (GX, TurboGX) | |
803 | frame buffer. | |
804 | ||
8d74c1fd KH |
805 | config FB_FFB |
806 | bool "Creator/Creator3D/Elite3D support" | |
807 | depends on FB_SBUS && SPARC64 | |
808 | select FB_CFB_COPYAREA | |
809 | select FB_CFB_IMAGEBLIT | |
810 | help | |
811 | This is the frame buffer device driver for the Creator, Creator3D, | |
812 | and Elite3D graphics boards. | |
813 | ||
814 | config FB_TCX | |
815 | bool "TCX (SS4/SS5 only) support" | |
816 | depends on FB_SBUS | |
817 | select FB_CFB_FILLRECT | |
818 | select FB_CFB_COPYAREA | |
819 | select FB_CFB_IMAGEBLIT | |
820 | help | |
821 | This is the frame buffer device driver for the TCX 24/8bit frame | |
822 | buffer. | |
823 | ||
824 | config FB_CG14 | |
825 | bool "CGfourteen (SX) support" | |
826 | depends on FB_SBUS | |
827 | select FB_CFB_FILLRECT | |
828 | select FB_CFB_COPYAREA | |
829 | select FB_CFB_IMAGEBLIT | |
830 | help | |
831 | This is the frame buffer device driver for the CGfourteen frame | |
832 | buffer on Desktop SPARCsystems with the SX graphics option. | |
833 | ||
834 | config FB_P9100 | |
835 | bool "P9100 (Sparcbook 3 only) support" | |
836 | depends on FB_SBUS | |
837 | select FB_CFB_FILLRECT | |
838 | select FB_CFB_COPYAREA | |
839 | select FB_CFB_IMAGEBLIT | |
840 | help | |
841 | This is the frame buffer device driver for the P9100 card | |
842 | supported on Sparcbook 3 machines. | |
843 | ||
844 | config FB_LEO | |
845 | bool "Leo (ZX) support" | |
846 | depends on FB_SBUS | |
847 | select FB_CFB_FILLRECT | |
848 | select FB_CFB_COPYAREA | |
849 | select FB_CFB_IMAGEBLIT | |
850 | help | |
851 | This is the frame buffer device driver for the SBUS-based Sun ZX | |
852 | (leo) frame buffer cards. | |
853 | ||
854 | config FB_IGA | |
855 | bool "IGA 168x display support" | |
e11a6c23 | 856 | depends on (FB = y) && SPARC32 |
8d74c1fd KH |
857 | select FB_CFB_FILLRECT |
858 | select FB_CFB_COPYAREA | |
859 | select FB_CFB_IMAGEBLIT | |
860 | help | |
861 | This is the framebuffer device for the INTERGRAPHICS 1680 and | |
862 | successor frame buffer cards. | |
863 | ||
864 | config FB_XVR500 | |
865 | bool "Sun XVR-500 3DLABS Wildcat support" | |
e11a6c23 | 866 | depends on (FB = y) && PCI && SPARC64 |
8d74c1fd KH |
867 | select FB_CFB_FILLRECT |
868 | select FB_CFB_COPYAREA | |
869 | select FB_CFB_IMAGEBLIT | |
870 | help | |
871 | This is the framebuffer device for the Sun XVR-500 and similar | |
872 | graphics cards based upon the 3DLABS Wildcat chipset. The driver | |
01dd2fbf | 873 | only works on sparc64 systems where the system firmware has |
8d74c1fd KH |
874 | mostly initialized the card already. It is treated as a |
875 | completely dumb framebuffer device. | |
876 | ||
877 | config FB_XVR2500 | |
878 | bool "Sun XVR-2500 3DLABS Wildcat support" | |
e11a6c23 | 879 | depends on (FB = y) && PCI && SPARC64 |
8d74c1fd KH |
880 | select FB_CFB_FILLRECT |
881 | select FB_CFB_COPYAREA | |
882 | select FB_CFB_IMAGEBLIT | |
883 | help | |
884 | This is the framebuffer device for the Sun XVR-2500 and similar | |
885 | graphics cards based upon the 3DLABS Wildcat chipset. The driver | |
01dd2fbf | 886 | only works on sparc64 systems where the system firmware has |
8d74c1fd KH |
887 | mostly initialized the card already. It is treated as a |
888 | completely dumb framebuffer device. | |
889 | ||
1da177e4 LT |
890 | config FB_PVR2 |
891 | tristate "NEC PowerVR 2 display support" | |
892 | depends on FB && SH_DREAMCAST | |
893 | select FB_CFB_FILLRECT | |
894 | select FB_CFB_COPYAREA | |
895 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
896 | ---help--- |
897 | Say Y here if you have a PowerVR 2 card in your box. If you plan to | |
898 | run linux on your Dreamcast, you will have to say Y here. | |
899 | This driver may or may not work on other PowerVR 2 cards, but is | |
900 | totally untested. Use at your own risk. If unsure, say N. | |
901 | ||
902 | To compile this driver as a module, choose M here: the | |
903 | module will be called pvr2fb. | |
904 | ||
905 | You can pass several parameters to the driver at boot time or at | |
906 | module load time. The parameters look like "video=pvr2:XXX", where | |
907 | the meaning of XXX can be found at the end of the main source file | |
908 | (<file:drivers/video/pvr2fb.c>). Please see the file | |
909 | <file:Documentation/fb/pvr2fb.txt>. | |
910 | ||
911 | config FB_EPSON1355 | |
912 | bool "Epson 1355 framebuffer support" | |
1a3f2881 | 913 | depends on (FB = y) && ARCH_CEIVA |
1da177e4 LT |
914 | select FB_CFB_FILLRECT |
915 | select FB_CFB_COPYAREA | |
916 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
917 | help |
918 | Build in support for the SED1355 Epson Research Embedded RAMDAC | |
919 | LCD/CRT Controller (since redesignated as the S1D13505) as a | |
920 | framebuffer. Product specs at | |
921 | <http://www.erd.epson.com/vdc/html/products.htm>. | |
922 | ||
ecc41d5e RD |
923 | config FB_S1D13XXX |
924 | tristate "Epson S1D13XXX framebuffer support" | |
925 | depends on FB | |
926 | select FB_CFB_FILLRECT | |
927 | select FB_CFB_COPYAREA | |
928 | select FB_CFB_IMAGEBLIT | |
ecc41d5e RD |
929 | help |
930 | Support for S1D13XXX framebuffer device family (currently only | |
931 | working with S1D13806). Product specs at | |
932 | <http://www.erd.epson.com/vdc/html/legacy_13xxx.htm> | |
933 | ||
14340586 NF |
934 | config FB_ATMEL |
935 | tristate "AT91/AT32 LCD Controller support" | |
2b3b3516 | 936 | depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || AVR32) |
14340586 NF |
937 | select FB_CFB_FILLRECT |
938 | select FB_CFB_COPYAREA | |
939 | select FB_CFB_IMAGEBLIT | |
940 | help | |
941 | This enables support for the AT91/AT32 LCD Controller. | |
942 | ||
943 | config FB_INTSRAM | |
944 | bool "Frame Buffer in internal SRAM" | |
945 | depends on FB_ATMEL && ARCH_AT91SAM9261 | |
946 | help | |
947 | Say Y if you want to map Frame Buffer in internal SRAM. Say N if you want | |
948 | to let frame buffer in external SDRAM. | |
949 | ||
250a269d NF |
950 | config FB_ATMEL_STN |
951 | bool "Use a STN display with AT91/AT32 LCD Controller" | |
952 | depends on FB_ATMEL && MACH_AT91SAM9261EK | |
953 | default n | |
954 | help | |
955 | Say Y if you want to connect a STN LCD display to the AT91/AT32 LCD | |
956 | Controller. Say N if you want to connect a TFT. | |
957 | ||
958 | If unsure, say N. | |
959 | ||
1da177e4 LT |
960 | config FB_NVIDIA |
961 | tristate "nVidia Framebuffer Support" | |
962 | depends on FB && PCI | |
e0e34ef7 | 963 | select FB_BACKLIGHT if FB_NVIDIA_BACKLIGHT |
1da177e4 LT |
964 | select FB_MODE_HELPERS |
965 | select FB_CFB_FILLRECT | |
966 | select FB_CFB_COPYAREA | |
967 | select FB_CFB_IMAGEBLIT | |
1c667682 | 968 | select BITREVERSE |
b2f594fd | 969 | select VGASTATE |
1da177e4 LT |
970 | help |
971 | This driver supports graphics boards with the nVidia chips, TNT | |
972 | and newer. For very old chipsets, such as the RIVA128, then use | |
973 | the rivafb. | |
974 | Say Y if you have such a graphics board. | |
975 | ||
976 | To compile this driver as a module, choose M here: the | |
977 | module will be called nvidiafb. | |
978 | ||
979 | config FB_NVIDIA_I2C | |
980 | bool "Enable DDC Support" | |
85f1503a | 981 | depends on FB_NVIDIA |
166f60dd | 982 | select FB_DDC |
1da177e4 LT |
983 | help |
984 | This enables I2C support for nVidia Chipsets. This is used | |
985 | only for getting EDID information from the attached display | |
986 | allowing for robust video mode handling and switching. | |
987 | ||
988 | Because fbdev-2.6 requires that drivers must be able to | |
989 | independently validate video mode parameters, you should say Y | |
990 | here. | |
991 | ||
647f2e7a JD |
992 | config FB_NVIDIA_DEBUG |
993 | bool "Lots of debug output" | |
994 | depends on FB_NVIDIA | |
995 | default n | |
996 | help | |
997 | Say Y here if you want the nVidia driver to output all sorts | |
998 | of debugging information to provide to the maintainer when | |
999 | something goes wrong. | |
1000 | ||
5474c120 MH |
1001 | config FB_NVIDIA_BACKLIGHT |
1002 | bool "Support for backlight control" | |
e0e34ef7 | 1003 | depends on FB_NVIDIA |
5474c120 MH |
1004 | default y |
1005 | help | |
1006 | Say Y here if you want to control the backlight of your display. | |
1007 | ||
1da177e4 LT |
1008 | config FB_RIVA |
1009 | tristate "nVidia Riva support" | |
1010 | depends on FB && PCI | |
e0e34ef7 | 1011 | select FB_BACKLIGHT if FB_RIVA_BACKLIGHT |
1da177e4 LT |
1012 | select FB_MODE_HELPERS |
1013 | select FB_CFB_FILLRECT | |
1014 | select FB_CFB_COPYAREA | |
1015 | select FB_CFB_IMAGEBLIT | |
1c667682 | 1016 | select BITREVERSE |
b2f594fd | 1017 | select VGASTATE |
1da177e4 LT |
1018 | help |
1019 | This driver supports graphics boards with the nVidia Riva/Geforce | |
1020 | chips. | |
1021 | Say Y if you have such a graphics board. | |
1022 | ||
1023 | To compile this driver as a module, choose M here: the | |
1024 | module will be called rivafb. | |
1025 | ||
1026 | config FB_RIVA_I2C | |
1027 | bool "Enable DDC Support" | |
1028 | depends on FB_RIVA | |
166f60dd | 1029 | select FB_DDC |
1da177e4 LT |
1030 | help |
1031 | This enables I2C support for nVidia Chipsets. This is used | |
1032 | only for getting EDID information from the attached display | |
1033 | allowing for robust video mode handling and switching. | |
1034 | ||
1035 | Because fbdev-2.6 requires that drivers must be able to | |
1036 | independently validate video mode parameters, you should say Y | |
1037 | here. | |
1038 | ||
1039 | config FB_RIVA_DEBUG | |
647f2e7a | 1040 | bool "Lots of debug output" |
1da177e4 LT |
1041 | depends on FB_RIVA |
1042 | default n | |
1043 | help | |
1044 | Say Y here if you want the Riva driver to output all sorts | |
09509603 | 1045 | of debugging information to provide to the maintainer when |
1da177e4 LT |
1046 | something goes wrong. |
1047 | ||
5474c120 MH |
1048 | config FB_RIVA_BACKLIGHT |
1049 | bool "Support for backlight control" | |
e0e34ef7 | 1050 | depends on FB_RIVA |
5474c120 MH |
1051 | default y |
1052 | help | |
1053 | Say Y here if you want to control the backlight of your display. | |
1054 | ||
1da177e4 LT |
1055 | config FB_I810 |
1056 | tristate "Intel 810/815 support (EXPERIMENTAL)" | |
0d078f6f | 1057 | depends on FB && EXPERIMENTAL && PCI && X86_32 |
1da177e4 LT |
1058 | select AGP |
1059 | select AGP_INTEL | |
1060 | select FB_MODE_HELPERS | |
1061 | select FB_CFB_FILLRECT | |
1062 | select FB_CFB_COPYAREA | |
1063 | select FB_CFB_IMAGEBLIT | |
b2f594fd | 1064 | select VGASTATE |
1da177e4 LT |
1065 | help |
1066 | This driver supports the on-board graphics built in to the Intel 810 | |
1067 | and 815 chipsets. Say Y if you have and plan to use such a board. | |
1068 | ||
1069 | To compile this driver as a module, choose M here: the | |
1070 | module will be called i810fb. | |
1071 | ||
1072 | For more information, please read | |
1073 | <file:Documentation/fb/intel810.txt> | |
1074 | ||
1075 | config FB_I810_GTF | |
1076 | bool "use VESA Generalized Timing Formula" | |
1077 | depends on FB_I810 | |
1078 | help | |
1079 | If you say Y, then the VESA standard, Generalized Timing Formula | |
1080 | or GTF, will be used to calculate the required video timing values | |
1081 | per video mode. Since the GTF allows nondiscrete timings | |
1082 | (nondiscrete being a range of values as opposed to discrete being a | |
1083 | set of values), you'll be able to use any combination of horizontal | |
1084 | and vertical resolutions, and vertical refresh rates without having | |
1085 | to specify your own timing parameters. This is especially useful | |
1086 | to maximize the performance of an aging display, or if you just | |
1087 | have a display with nonstandard dimensions. A VESA compliant | |
1088 | monitor is recommended, but can still work with non-compliant ones. | |
1089 | If you need or want this, then select this option. The timings may | |
1090 | not be compliant with Intel's recommended values. Use at your own | |
1091 | risk. | |
1092 | ||
1093 | If you say N, the driver will revert to discrete video timings | |
1094 | using a set recommended by Intel in their documentation. | |
1095 | ||
1096 | If unsure, say N. | |
1097 | ||
74f6ae84 AD |
1098 | config FB_I810_I2C |
1099 | bool "Enable DDC Support" | |
db84502b | 1100 | depends on FB_I810 && FB_I810_GTF |
e80987f8 | 1101 | select FB_DDC |
74f6ae84 AD |
1102 | help |
1103 | ||
dbe7e429 AH |
1104 | config FB_LE80578 |
1105 | tristate "Intel LE80578 (Vermilion) support" | |
1106 | depends on FB && PCI && X86 | |
1107 | select FB_MODE_HELPERS | |
1108 | select FB_CFB_FILLRECT | |
1109 | select FB_CFB_COPYAREA | |
1110 | select FB_CFB_IMAGEBLIT | |
1111 | help | |
1112 | This driver supports the LE80578 (Vermilion Range) chipset | |
1113 | ||
1114 | config FB_CARILLO_RANCH | |
1115 | tristate "Intel Carillo Ranch support" | |
1116 | depends on FB_LE80578 && FB && PCI && X86 | |
1117 | help | |
1118 | This driver supports the LE80578 (Carillo Ranch) board | |
1119 | ||
1da177e4 | 1120 | config FB_INTEL |
0e170c72 | 1121 | tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G/945GM/965G/965GM support (EXPERIMENTAL)" |
0c187add | 1122 | depends on FB && EXPERIMENTAL && PCI && X86 |
1da177e4 LT |
1123 | select AGP |
1124 | select AGP_INTEL | |
1125 | select FB_MODE_HELPERS | |
1126 | select FB_CFB_FILLRECT | |
1127 | select FB_CFB_COPYAREA | |
1128 | select FB_CFB_IMAGEBLIT | |
4d31a2b7 | 1129 | select FB_BOOT_VESA_SUPPORT |
1da177e4 LT |
1130 | help |
1131 | This driver supports the on-board graphics built in to the Intel | |
0e170c72 | 1132 | 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets. |
1da177e4 LT |
1133 | Say Y if you have and plan to use such a board. |
1134 | ||
1f6e8449 DM |
1135 | If you say Y here and want DDC/I2C support you must first say Y to |
1136 | "I2C support" and "I2C bit-banging support" in the character devices | |
1137 | section. | |
1138 | ||
1139 | If you say M here then "I2C support" and "I2C bit-banging support" | |
1140 | can be build either as modules or built-in. | |
1141 | ||
1142 | To compile this driver as a module, choose M here: the | |
1da177e4 LT |
1143 | module will be called intelfb. |
1144 | ||
d463d34e CM |
1145 | For more information, please read <file:Documentation/fb/intelfb.txt> |
1146 | ||
1da177e4 | 1147 | config FB_INTEL_DEBUG |
1f6e8449 | 1148 | bool "Intel driver Debug Messages" |
1da177e4 LT |
1149 | depends on FB_INTEL |
1150 | ---help--- | |
1151 | Say Y here if you want the Intel driver to output all sorts | |
09509603 | 1152 | of debugging information to provide to the maintainer when |
1da177e4 LT |
1153 | something goes wrong. |
1154 | ||
1f6e8449 DM |
1155 | config FB_INTEL_I2C |
1156 | bool "DDC/I2C for Intel framebuffer support" | |
1157 | depends on FB_INTEL | |
166f60dd | 1158 | select FB_DDC |
1f6e8449 DM |
1159 | default y |
1160 | help | |
1161 | Say Y here if you want DDC/I2C support for your on-board Intel graphics. | |
1162 | ||
1da177e4 LT |
1163 | config FB_MATROX |
1164 | tristate "Matrox acceleration" | |
1165 | depends on FB && PCI | |
1166 | select FB_CFB_FILLRECT | |
1167 | select FB_CFB_COPYAREA | |
1168 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1169 | select FB_TILEBLITTING |
1170 | select FB_MACMODES if PPC_PMAC | |
1171 | ---help--- | |
1172 | Say Y here if you have a Matrox Millennium, Matrox Millennium II, | |
1173 | Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox | |
1174 | Mystique G200, Matrox Millennium G200, Matrox Marvel G200 video, | |
1175 | Matrox G400, G450 or G550 card in your box. | |
1176 | ||
1177 | To compile this driver as a module, choose M here: the | |
1178 | module will be called matroxfb. | |
1179 | ||
1180 | You can pass several parameters to the driver at boot time or at | |
1181 | module load time. The parameters look like "video=matrox:XXX", and | |
1182 | are described in <file:Documentation/fb/matroxfb.txt>. | |
1183 | ||
1184 | config FB_MATROX_MILLENIUM | |
1185 | bool "Millennium I/II support" | |
1186 | depends on FB_MATROX | |
1187 | help | |
1188 | Say Y here if you have a Matrox Millennium or Matrox Millennium II | |
1189 | video card. If you select "Advanced lowlevel driver options" below, | |
1190 | you should check 4 bpp packed pixel, 8 bpp packed pixel, 16 bpp | |
1191 | packed pixel, 24 bpp packed pixel and 32 bpp packed pixel. You can | |
1192 | also use font widths different from 8. | |
1193 | ||
1194 | config FB_MATROX_MYSTIQUE | |
1195 | bool "Mystique support" | |
1196 | depends on FB_MATROX | |
1197 | help | |
1198 | Say Y here if you have a Matrox Mystique or Matrox Mystique 220 | |
1199 | video card. If you select "Advanced lowlevel driver options" below, | |
1200 | you should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp | |
1201 | packed pixel and 32 bpp packed pixel. You can also use font widths | |
1202 | different from 8. | |
1203 | ||
1204 | config FB_MATROX_G | |
1205 | bool "G100/G200/G400/G450/G550 support" | |
1206 | depends on FB_MATROX | |
1207 | ---help--- | |
1208 | Say Y here if you have a Matrox G100, G200, G400, G450 or G550 based | |
1209 | video card. If you select "Advanced lowlevel driver options", you | |
1210 | should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp packed | |
1211 | pixel and 32 bpp packed pixel. You can also use font widths | |
1212 | different from 8. | |
1213 | ||
1214 | If you need support for G400 secondary head, you must first say Y to | |
1215 | "I2C support" in the character devices section, and then to | |
1216 | "Matrox I2C support" and "G400 second head support" here in the | |
1217 | framebuffer section. G450/G550 secondary head and digital output | |
1218 | are supported without additional modules. | |
1219 | ||
1220 | The driver starts in monitor mode. You must use the matroxset tool | |
1221 | (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to | |
1222 | swap primary and secondary head outputs, or to change output mode. | |
1223 | Secondary head driver always start in 640x480 resolution and you | |
1224 | must use fbset to change it. | |
1225 | ||
1226 | Do not forget that second head supports only 16 and 32 bpp | |
1227 | packed pixels, so it is a good idea to compile them into the kernel | |
1228 | too. You can use only some font widths, as the driver uses generic | |
1229 | painting procedures (the secondary head does not use acceleration | |
1230 | engine). | |
1231 | ||
1232 | G450/G550 hardware can display TV picture only from secondary CRTC, | |
1233 | and it performs no scaling, so picture must have 525 or 625 lines. | |
1234 | ||
1235 | config FB_MATROX_I2C | |
1236 | tristate "Matrox I2C support" | |
166f60dd JS |
1237 | depends on FB_MATROX |
1238 | select FB_DDC | |
1da177e4 LT |
1239 | ---help--- |
1240 | This drivers creates I2C buses which are needed for accessing the | |
1241 | DDC (I2C) bus present on all Matroxes, an I2C bus which | |
1242 | interconnects Matrox optional devices, like MGA-TVO on G200 and | |
1243 | G400, and the secondary head DDC bus, present on G400 only. | |
1244 | ||
1245 | You can say Y or M here if you want to experiment with monitor | |
1246 | detection code. You must say Y or M here if you want to use either | |
1247 | second head of G400 or MGA-TVO on G200 or G400. | |
1248 | ||
1249 | If you compile it as module, it will create a module named | |
1250 | i2c-matroxfb. | |
1251 | ||
1252 | config FB_MATROX_MAVEN | |
1253 | tristate "G400 second head support" | |
1254 | depends on FB_MATROX_G && FB_MATROX_I2C | |
1255 | ---help--- | |
1256 | WARNING !!! This support does not work with G450 !!! | |
1257 | ||
1258 | Say Y or M here if you want to use a secondary head (meaning two | |
1259 | monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary | |
1260 | head is not compatible with accelerated XFree 3.3.x SVGA servers - | |
1261 | secondary head output is blanked while you are in X. With XFree | |
1262 | 3.9.17 preview you can use both heads if you use SVGA over fbdev or | |
1263 | the fbdev driver on first head and the fbdev driver on second head. | |
1264 | ||
1265 | If you compile it as module, two modules are created, | |
1266 | matroxfb_crtc2 and matroxfb_maven. Matroxfb_maven is needed for | |
1267 | both G200 and G400, matroxfb_crtc2 is needed only by G400. You must | |
1268 | also load i2c-matroxfb to get it to run. | |
1269 | ||
1270 | The driver starts in monitor mode and you must use the matroxset | |
1271 | tool (available at | |
1272 | <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to | |
1273 | PAL or NTSC or to swap primary and secondary head outputs. | |
1274 | Secondary head driver also always start in 640x480 resolution, you | |
1275 | must use fbset to change it. | |
1276 | ||
1277 | Also do not forget that second head supports only 16 and 32 bpp | |
1278 | packed pixels, so it is a good idea to compile them into the kernel | |
1279 | too. You can use only some font widths, as the driver uses generic | |
1280 | painting procedures (the secondary head does not use acceleration | |
1281 | engine). | |
1282 | ||
1283 | config FB_MATROX_MULTIHEAD | |
1284 | bool "Multihead support" | |
1285 | depends on FB_MATROX | |
1286 | ---help--- | |
1287 | Say Y here if you have more than one (supported) Matrox device in | |
1288 | your computer and you want to use all of them for different monitors | |
1289 | ("multihead"). If you have only one device, you should say N because | |
1290 | the driver compiled with Y is larger and a bit slower, especially on | |
1291 | ia32 (ix86). | |
1292 | ||
1293 | If you said M to "Matrox unified accelerated driver" and N here, you | |
1294 | will still be able to use several Matrox devices simultaneously: | |
1295 | insert several instances of the module matroxfb into the kernel | |
1296 | with insmod, supplying the parameter "dev=N" where N is 0, 1, etc. | |
1297 | for the different Matrox devices. This method is slightly faster but | |
1298 | uses 40 KB of kernel memory per Matrox card. | |
1299 | ||
1300 | There is no need for enabling 'Matrox multihead support' if you have | |
1301 | only one Matrox card in the box. | |
1302 | ||
1da177e4 LT |
1303 | config FB_RADEON |
1304 | tristate "ATI Radeon display support" | |
1305 | depends on FB && PCI | |
e0e34ef7 | 1306 | select FB_BACKLIGHT if FB_RADEON_BACKLIGHT |
1da177e4 LT |
1307 | select FB_MODE_HELPERS |
1308 | select FB_CFB_FILLRECT | |
1309 | select FB_CFB_COPYAREA | |
1310 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1311 | select FB_MACMODES if PPC_OF |
1312 | help | |
1313 | Choose this option if you want to use an ATI Radeon graphics card as | |
1314 | a framebuffer device. There are both PCI and AGP versions. You | |
1315 | don't need to choose this to run the Radeon in plain VGA mode. | |
1316 | ||
1317 | If you say Y here and want DDC/I2C support you must first say Y to | |
1318 | "I2C support" and "I2C bit-banging support" in the character devices | |
1319 | section. | |
1320 | ||
1321 | If you say M here then "I2C support" and "I2C bit-banging support" | |
1322 | can be build either as modules or built-in. | |
1323 | ||
1324 | There is a product page at | |
f510a3c3 | 1325 | http://apps.ati.com/ATIcompare/ |
5474c120 | 1326 | |
1da177e4 LT |
1327 | config FB_RADEON_I2C |
1328 | bool "DDC/I2C for ATI Radeon support" | |
1329 | depends on FB_RADEON | |
166f60dd | 1330 | select FB_DDC |
1da177e4 LT |
1331 | default y |
1332 | help | |
1333 | Say Y here if you want DDC/I2C support for your Radeon board. | |
1334 | ||
5474c120 MH |
1335 | config FB_RADEON_BACKLIGHT |
1336 | bool "Support for backlight control" | |
e0e34ef7 | 1337 | depends on FB_RADEON |
5474c120 MH |
1338 | default y |
1339 | help | |
1340 | Say Y here if you want to control the backlight of your display. | |
1341 | ||
1da177e4 LT |
1342 | config FB_RADEON_DEBUG |
1343 | bool "Lots of debug output from Radeon driver" | |
1344 | depends on FB_RADEON | |
1345 | default n | |
1346 | help | |
1347 | Say Y here if you want the Radeon driver to output all sorts | |
09509603 | 1348 | of debugging information to provide to the maintainer when |
1da177e4 LT |
1349 | something goes wrong. |
1350 | ||
1351 | config FB_ATY128 | |
1352 | tristate "ATI Rage128 display support" | |
1353 | depends on FB && PCI | |
1354 | select FB_CFB_FILLRECT | |
1355 | select FB_CFB_COPYAREA | |
1356 | select FB_CFB_IMAGEBLIT | |
e0e34ef7 | 1357 | select FB_BACKLIGHT if FB_ATY128_BACKLIGHT |
1da177e4 LT |
1358 | select FB_MACMODES if PPC_PMAC |
1359 | help | |
1360 | This driver supports graphics boards with the ATI Rage128 chips. | |
1361 | Say Y if you have such a graphics board and read | |
1362 | <file:Documentation/fb/aty128fb.txt>. | |
1363 | ||
1364 | To compile this driver as a module, choose M here: the | |
1365 | module will be called aty128fb. | |
1366 | ||
5474c120 MH |
1367 | config FB_ATY128_BACKLIGHT |
1368 | bool "Support for backlight control" | |
e0e34ef7 | 1369 | depends on FB_ATY128 |
5474c120 MH |
1370 | default y |
1371 | help | |
1372 | Say Y here if you want to control the backlight of your display. | |
1373 | ||
1da177e4 LT |
1374 | config FB_ATY |
1375 | tristate "ATI Mach64 display support" if PCI || ATARI | |
f2e782ef | 1376 | depends on FB && !SPARC32 |
1da177e4 LT |
1377 | select FB_CFB_FILLRECT |
1378 | select FB_CFB_COPYAREA | |
1379 | select FB_CFB_IMAGEBLIT | |
e0e34ef7 | 1380 | select FB_BACKLIGHT if FB_ATY_BACKLIGHT |
1da177e4 LT |
1381 | select FB_MACMODES if PPC |
1382 | help | |
1383 | This driver supports graphics boards with the ATI Mach64 chips. | |
1384 | Say Y if you have such a graphics board. | |
1385 | ||
1386 | To compile this driver as a module, choose M here: the | |
1387 | module will be called atyfb. | |
1388 | ||
1389 | config FB_ATY_CT | |
1390 | bool "Mach64 CT/VT/GT/LT (incl. 3D RAGE) support" | |
1391 | depends on PCI && FB_ATY | |
8d74c1fd | 1392 | default y if SPARC64 && PCI |
1da177e4 LT |
1393 | help |
1394 | Say Y here to support use of ATI's 64-bit Rage boards (or other | |
1395 | boards based on the Mach64 CT, VT, GT, and LT chipsets) as a | |
1396 | framebuffer device. The ATI product support page for these boards | |
1397 | is at <http://support.ati.com/products/pc/mach64/>. | |
1398 | ||
1399 | config FB_ATY_GENERIC_LCD | |
1400 | bool "Mach64 generic LCD support (EXPERIMENTAL)" | |
1401 | depends on FB_ATY_CT | |
1402 | help | |
1403 | Say Y if you have a laptop with an ATI Rage LT PRO, Rage Mobility, | |
1404 | Rage XC, or Rage XL chipset. | |
1405 | ||
1da177e4 LT |
1406 | config FB_ATY_GX |
1407 | bool "Mach64 GX support" if PCI | |
1408 | depends on FB_ATY | |
1409 | default y if ATARI | |
1410 | help | |
1411 | Say Y here to support use of the ATI Mach64 Graphics Expression | |
1412 | board (or other boards based on the Mach64 GX chipset) as a | |
1413 | framebuffer device. The ATI product support page for these boards | |
1414 | is at | |
1415 | <http://support.ati.com/products/pc/mach64/graphics_xpression.html>. | |
1416 | ||
5474c120 MH |
1417 | config FB_ATY_BACKLIGHT |
1418 | bool "Support for backlight control" | |
e0e34ef7 | 1419 | depends on FB_ATY |
5474c120 MH |
1420 | default y |
1421 | help | |
1422 | Say Y here if you want to control the backlight of your display. | |
1423 | ||
a268422d OZ |
1424 | config FB_S3 |
1425 | tristate "S3 Trio/Virge support" | |
1426 | depends on FB && PCI | |
1427 | select FB_CFB_FILLRECT | |
1428 | select FB_CFB_COPYAREA | |
1429 | select FB_CFB_IMAGEBLIT | |
1430 | select FB_TILEBLITTING | |
1431 | select FB_SVGALIB | |
b2f594fd | 1432 | select VGASTATE |
8db51668 | 1433 | select FONT_8x16 if FRAMEBUFFER_CONSOLE |
a268422d OZ |
1434 | ---help--- |
1435 | Driver for graphics boards with S3 Trio / S3 Virge chip. | |
1436 | ||
1da177e4 LT |
1437 | config FB_SAVAGE |
1438 | tristate "S3 Savage support" | |
1439 | depends on FB && PCI && EXPERIMENTAL | |
1da177e4 LT |
1440 | select FB_MODE_HELPERS |
1441 | select FB_CFB_FILLRECT | |
1442 | select FB_CFB_COPYAREA | |
1443 | select FB_CFB_IMAGEBLIT | |
b2f594fd | 1444 | select VGASTATE |
1da177e4 LT |
1445 | help |
1446 | This driver supports notebooks and computers with S3 Savage PCI/AGP | |
1447 | chips. | |
1448 | ||
1449 | Say Y if you have such a graphics card. | |
1450 | ||
1451 | To compile this driver as a module, choose M here; the module | |
1452 | will be called savagefb. | |
1453 | ||
1454 | config FB_SAVAGE_I2C | |
1455 | bool "Enable DDC2 Support" | |
1456 | depends on FB_SAVAGE | |
166f60dd | 1457 | select FB_DDC |
1da177e4 LT |
1458 | help |
1459 | This enables I2C support for S3 Savage Chipsets. This is used | |
1460 | only for getting EDID information from the attached display | |
1461 | allowing for robust video mode handling and switching. | |
1462 | ||
1463 | Because fbdev-2.6 requires that drivers must be able to | |
1464 | independently validate video mode parameters, you should say Y | |
1465 | here. | |
1466 | ||
1467 | config FB_SAVAGE_ACCEL | |
1468 | bool "Enable Console Acceleration" | |
1469 | depends on FB_SAVAGE | |
1470 | default n | |
1471 | help | |
1472 | This option will compile in console acceleration support. If | |
1473 | the resulting framebuffer console has bothersome glitches, then | |
1474 | choose N here. | |
1475 | ||
1476 | config FB_SIS | |
544393fe | 1477 | tristate "SiS/XGI display support" |
1da177e4 LT |
1478 | depends on FB && PCI |
1479 | select FB_CFB_FILLRECT | |
1480 | select FB_CFB_COPYAREA | |
1481 | select FB_CFB_IMAGEBLIT | |
4d31a2b7 | 1482 | select FB_BOOT_VESA_SUPPORT |
1da177e4 | 1483 | help |
544393fe TW |
1484 | This is the frame buffer device driver for the SiS 300, 315, 330 |
1485 | and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets. | |
1486 | Specs available at <http://www.sis.com> and <http://www.xgitech.com>. | |
1da177e4 LT |
1487 | |
1488 | To compile this driver as a module, choose M here; the module | |
1489 | will be called sisfb. | |
1490 | ||
1491 | config FB_SIS_300 | |
1492 | bool "SiS 300 series support" | |
1493 | depends on FB_SIS | |
1494 | help | |
1495 | Say Y here to support use of the SiS 300/305, 540, 630 and 730. | |
1496 | ||
1497 | config FB_SIS_315 | |
544393fe | 1498 | bool "SiS 315/330/340 series and XGI support" |
1da177e4 LT |
1499 | depends on FB_SIS |
1500 | help | |
544393fe TW |
1501 | Say Y here to support use of the SiS 315, 330 and 340 series |
1502 | (315/H/PRO, 55x, 650, 651, 740, 330, 661, 741, 760, 761) as well | |
1503 | as XGI V3XT, V5, V8 and Z7. | |
1da177e4 | 1504 | |
6bde3ed9 JC |
1505 | config FB_VIA |
1506 | tristate "VIA UniChrome (Pro) and Chrome9 display support" | |
1507 | depends on FB && PCI | |
1508 | select FB_CFB_FILLRECT | |
1509 | select FB_CFB_COPYAREA | |
1510 | select FB_CFB_IMAGEBLIT | |
1511 | select FB_SOFT_CURSOR | |
1512 | select I2C_ALGOBIT | |
1513 | select I2C | |
1514 | help | |
1515 | This is the frame buffer device driver for Graphics chips of VIA | |
1516 | UniChrome (Pro) Family (CLE266,PM800/CN400,P4M800CE/P4M800Pro/ | |
1517 | CN700/VN800,CX700/VX700,P4M890) and Chrome9 Family (K8M890,CN896 | |
1518 | /P4M900,VX800) | |
1519 | Say Y if you have a VIA UniChrome graphics board. | |
1520 | ||
1521 | To compile this driver as a module, choose M here: the | |
1522 | module will be called viafb. | |
1da177e4 LT |
1523 | config FB_NEOMAGIC |
1524 | tristate "NeoMagic display support" | |
1525 | depends on FB && PCI | |
1526 | select FB_MODE_HELPERS | |
1527 | select FB_CFB_FILLRECT | |
1528 | select FB_CFB_COPYAREA | |
1529 | select FB_CFB_IMAGEBLIT | |
b2f594fd | 1530 | select VGASTATE |
1da177e4 LT |
1531 | help |
1532 | This driver supports notebooks with NeoMagic PCI chips. | |
1533 | Say Y if you have such a graphics card. | |
1534 | ||
1535 | To compile this driver as a module, choose M here: the | |
1536 | module will be called neofb. | |
1537 | ||
1538 | config FB_KYRO | |
1539 | tristate "IMG Kyro support" | |
1540 | depends on FB && PCI | |
1541 | select FB_CFB_FILLRECT | |
1542 | select FB_CFB_COPYAREA | |
1543 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1544 | help |
1545 | Say Y here if you have a STG4000 / Kyro / PowerVR 3 based | |
1546 | graphics board. | |
1547 | ||
1548 | To compile this driver as a module, choose M here: the | |
1549 | module will be called kyrofb. | |
1550 | ||
1551 | config FB_3DFX | |
4edad7f0 | 1552 | tristate "3Dfx Banshee/Voodoo3/Voodoo5 display support" |
1da177e4 LT |
1553 | depends on FB && PCI |
1554 | select FB_CFB_IMAGEBLIT | |
1555 | select FB_CFB_FILLRECT | |
1556 | select FB_CFB_COPYAREA | |
1da177e4 | 1557 | help |
4edad7f0 KH |
1558 | This driver supports graphics boards with the 3Dfx Banshee, |
1559 | Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have | |
1560 | such a graphics board. | |
1da177e4 LT |
1561 | |
1562 | To compile this driver as a module, choose M here: the | |
1563 | module will be called tdfxfb. | |
1564 | ||
1565 | config FB_3DFX_ACCEL | |
4edad7f0 | 1566 | bool "3Dfx Acceleration functions (EXPERIMENTAL)" |
1da177e4 LT |
1567 | depends on FB_3DFX && EXPERIMENTAL |
1568 | ---help--- | |
4edad7f0 KH |
1569 | This will compile the 3Dfx Banshee/Voodoo3/VSA-100 frame buffer |
1570 | device driver with acceleration functions. | |
1da177e4 LT |
1571 | |
1572 | config FB_VOODOO1 | |
1573 | tristate "3Dfx Voodoo Graphics (sst1) support" | |
1574 | depends on FB && PCI | |
1575 | select FB_CFB_FILLRECT | |
1576 | select FB_CFB_COPYAREA | |
1577 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1578 | ---help--- |
1579 | Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or | |
1580 | Voodoo2 (cvg) based graphics card. | |
1581 | ||
1582 | To compile this driver as a module, choose M here: the | |
1583 | module will be called sstfb. | |
1584 | ||
1585 | WARNING: Do not use any application that uses the 3D engine | |
1586 | (namely glide) while using this driver. | |
e403149c | 1587 | Please read the <file:Documentation/fb/sstfb.txt> for supported |
1da177e4 LT |
1588 | options and other important info support. |
1589 | ||
558b7bd8 OZ |
1590 | config FB_VT8623 |
1591 | tristate "VIA VT8623 support" | |
1592 | depends on FB && PCI | |
1593 | select FB_CFB_FILLRECT | |
1594 | select FB_CFB_COPYAREA | |
1595 | select FB_CFB_IMAGEBLIT | |
1596 | select FB_TILEBLITTING | |
1597 | select FB_SVGALIB | |
1598 | select VGASTATE | |
1599 | select FONT_8x16 if FRAMEBUFFER_CONSOLE | |
1600 | ---help--- | |
1601 | Driver for CastleRock integrated graphics core in the | |
1602 | VIA VT8623 [Apollo CLE266] chipset. | |
1603 | ||
9fa68eae KP |
1604 | config FB_CYBLA |
1605 | tristate "Cyberblade/i1 support" | |
44637a12 | 1606 | depends on FB && PCI && X86_32 && !64BIT |
9fa68eae | 1607 | select FB_CFB_IMAGEBLIT |
9fa68eae KP |
1608 | ---help--- |
1609 | This driver is supposed to support the Trident Cyberblade/i1 | |
1610 | graphics core integrated in the VIA VT8601A North Bridge, | |
1611 | also known as VIA Apollo PLE133. | |
1612 | ||
1613 | Status: | |
1614 | - Developed, tested and working on EPIA 5000 and EPIA 800. | |
1615 | - Does work reliable on all systems with CRT/LCD connected to | |
1616 | normal VGA ports. | |
1617 | - Should work on systems that do use the internal LCD port, but | |
1618 | this is absolutely not tested. | |
1619 | ||
1620 | Character imageblit, copyarea and rectangle fill are hw accelerated, | |
1621 | ypan scrolling is used by default. | |
1622 | ||
1623 | Please do read <file:Documentation/fb/cyblafb/*>. | |
1624 | ||
1625 | To compile this driver as a module, choose M here: the | |
1626 | module will be called cyblafb. | |
1627 | ||
1da177e4 LT |
1628 | config FB_TRIDENT |
1629 | tristate "Trident support" | |
1630 | depends on FB && PCI | |
1631 | select FB_CFB_FILLRECT | |
1632 | select FB_CFB_COPYAREA | |
1633 | select FB_CFB_IMAGEBLIT | |
1da177e4 | 1634 | ---help--- |
4edad7f0 KH |
1635 | This is the frame buffer device driver for Trident PCI/AGP chipsets. |
1636 | Supported chipset families are TGUI 9440/96XX, 3DImage, Blade3D | |
1637 | and Blade XP. | |
1638 | There are also integrated versions of these chips called CyberXXXX, | |
1639 | CyberImage or CyberBlade. These chips are mostly found in laptops | |
1da177e4 LT |
1640 | but also on some motherboards. For more information, read |
1641 | <file:Documentation/fb/tridentfb.txt> | |
1642 | ||
1643 | Say Y if you have such a graphics board. | |
1644 | ||
1645 | To compile this driver as a module, choose M here: the | |
1646 | module will be called tridentfb. | |
1647 | ||
1648 | config FB_TRIDENT_ACCEL | |
1649 | bool "Trident Acceleration functions (EXPERIMENTAL)" | |
1650 | depends on FB_TRIDENT && EXPERIMENTAL | |
1651 | ---help--- | |
1652 | This will compile the Trident frame buffer device with | |
1653 | acceleration functions. | |
1654 | ||
681e1473 OZ |
1655 | config FB_ARK |
1656 | tristate "ARK 2000PV support" | |
1657 | depends on FB && PCI | |
1658 | select FB_CFB_FILLRECT | |
1659 | select FB_CFB_COPYAREA | |
1660 | select FB_CFB_IMAGEBLIT | |
1661 | select FB_TILEBLITTING | |
1662 | select FB_SVGALIB | |
1663 | select VGASTATE | |
1664 | select FONT_8x16 if FRAMEBUFFER_CONSOLE | |
1665 | ---help--- | |
1666 | Driver for PCI graphics boards with ARK 2000PV chip | |
1667 | and ICS 5342 RAMDAC. | |
1668 | ||
1da177e4 | 1669 | config FB_PM3 |
f23a06f0 KH |
1670 | tristate "Permedia3 support (EXPERIMENTAL)" |
1671 | depends on FB && PCI && EXPERIMENTAL | |
1672 | select FB_CFB_FILLRECT | |
1673 | select FB_CFB_COPYAREA | |
1674 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1675 | help |
1676 | This is the frame buffer device driver for the 3DLabs Permedia3 | |
1677 | chipset, used in Formac ProFormance III, 3DLabs Oxygen VX1 & | |
1678 | similar boards, 3DLabs Permedia3 Create!, Appian Jeronimo 2000 | |
1679 | and maybe other boards. | |
1680 | ||
2ece5f43 SS |
1681 | config FB_CARMINE |
1682 | tristate "Fujitsu carmine frame buffer support" | |
1683 | depends on FB && PCI | |
1684 | select FB_CFB_FILLRECT | |
1685 | select FB_CFB_COPYAREA | |
1686 | select FB_CFB_IMAGEBLIT | |
1687 | help | |
1688 | This is the frame buffer device driver for the Fujitsu Carmine chip. | |
1689 | The driver provides two independent frame buffer devices. | |
1690 | ||
1691 | choice | |
1692 | depends on FB_CARMINE | |
1693 | prompt "DRAM timing" | |
1694 | default FB_CARMINE_DRAM_EVAL | |
1695 | ||
1696 | config FB_CARMINE_DRAM_EVAL | |
1697 | bool "Eval board timings" | |
1698 | help | |
1699 | Use timings which work on the eval card. | |
1700 | ||
1701 | config CARMINE_DRAM_CUSTOM | |
1702 | bool "Custom board timings" | |
1703 | help | |
1704 | Use custom board timings. | |
1705 | endchoice | |
1706 | ||
1da177e4 LT |
1707 | config FB_AU1100 |
1708 | bool "Au1100 LCD Driver" | |
d1709e47 RB |
1709 | depends on (FB = y) && MIPS && SOC_AU1100 |
1710 | select FB_CFB_FILLRECT | |
1711 | select FB_CFB_COPYAREA | |
1712 | select FB_CFB_IMAGEBLIT | |
1713 | help | |
1714 | This is the framebuffer driver for the AMD Au1100 SOC. It can drive | |
1715 | various panels and CRTs by passing in kernel cmd line option | |
1716 | au1100fb:panel=<name>. | |
1da177e4 | 1717 | |
f95ec3c6 RB |
1718 | config FB_AU1200 |
1719 | bool "Au1200 LCD Driver" | |
833f8062 | 1720 | depends on (FB = y) && MIPS && SOC_AU1200 |
f95ec3c6 RB |
1721 | select FB_CFB_FILLRECT |
1722 | select FB_CFB_COPYAREA | |
1723 | select FB_CFB_IMAGEBLIT | |
1724 | help | |
1725 | This is the framebuffer driver for the AMD Au1200 SOC. It can drive | |
1726 | various panels and CRTs by passing in kernel cmd line option | |
1727 | au1200fb:panel=<name>. | |
1728 | ||
1da177e4 LT |
1729 | source "drivers/video/geode/Kconfig" |
1730 | ||
1da177e4 LT |
1731 | config FB_HIT |
1732 | tristate "HD64461 Frame Buffer support" | |
1733 | depends on FB && HD64461 | |
1734 | select FB_CFB_FILLRECT | |
1735 | select FB_CFB_COPYAREA | |
1736 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1737 | help |
1738 | This is the frame buffer device driver for the Hitachi HD64461 LCD | |
1739 | frame buffer card. | |
1740 | ||
1741 | config FB_PMAG_AA | |
1742 | bool "PMAG-AA TURBOchannel framebuffer support" | |
a9350003 | 1743 | depends on (FB = y) && TC |
1da177e4 LT |
1744 | select FB_CFB_FILLRECT |
1745 | select FB_CFB_COPYAREA | |
1746 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1747 | help |
1748 | Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1) | |
1749 | used mainly in the MIPS-based DECstation series. | |
1750 | ||
1751 | config FB_PMAG_BA | |
335dc50c MR |
1752 | tristate "PMAG-BA TURBOchannel framebuffer support" |
1753 | depends on FB && TC | |
1da177e4 LT |
1754 | select FB_CFB_FILLRECT |
1755 | select FB_CFB_COPYAREA | |
1756 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1757 | help |
1758 | Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8) | |
1759 | used mainly in the MIPS-based DECstation series. | |
1760 | ||
1761 | config FB_PMAGB_B | |
9084b005 | 1762 | tristate "PMAGB-B TURBOchannel framebuffer support" |
28ea28a6 | 1763 | depends on FB && TC |
1da177e4 LT |
1764 | select FB_CFB_FILLRECT |
1765 | select FB_CFB_COPYAREA | |
1766 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1767 | help |
1768 | Support for the PMAGB-B TURBOchannel framebuffer card used mainly | |
1769 | in the MIPS-based DECstation series. The card is currently only | |
1770 | supported in 1280x1024x8 mode. | |
1771 | ||
1772 | config FB_MAXINE | |
1773 | bool "Maxine (Personal DECstation) onboard framebuffer support" | |
a9350003 | 1774 | depends on (FB = y) && MACH_DECSTATION |
1da177e4 LT |
1775 | select FB_CFB_FILLRECT |
1776 | select FB_CFB_COPYAREA | |
1777 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1778 | help |
1779 | Support for the onboard framebuffer (1024x768x8) in the Personal | |
1780 | DECstation series (Personal DECstation 5000/20, /25, /33, /50, | |
1781 | Codename "Maxine"). | |
1782 | ||
1da177e4 | 1783 | config FB_G364 |
b38817dd YY |
1784 | bool "G364 frame buffer support" |
1785 | depends on (FB = y) && (MIPS_MAGNUM_4000 || OLIVETTI_M700) | |
1da177e4 LT |
1786 | select FB_CFB_FILLRECT |
1787 | select FB_CFB_COPYAREA | |
1788 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1789 | help |
1790 | The G364 driver is the framebuffer used in MIPS Magnum 4000 and | |
1791 | Olivetti M700-10 systems. | |
1792 | ||
1793 | config FB_68328 | |
1794 | bool "Motorola 68328 native frame buffer support" | |
833f8062 | 1795 | depends on (FB = y) && (M68328 || M68EZ328 || M68VZ328) |
1da177e4 LT |
1796 | select FB_CFB_FILLRECT |
1797 | select FB_CFB_COPYAREA | |
1798 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1799 | help |
1800 | Say Y here if you want to support the built-in frame buffer of | |
1801 | the Motorola 68328 CPU family. | |
1802 | ||
1803 | config FB_PXA | |
1804 | tristate "PXA LCD framebuffer support" | |
1805 | depends on FB && ARCH_PXA | |
1806 | select FB_CFB_FILLRECT | |
1807 | select FB_CFB_COPYAREA | |
1808 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1809 | ---help--- |
1810 | Frame buffer driver for the built-in LCD controller in the Intel | |
1811 | PXA2x0 processor. | |
1812 | ||
1813 | This driver is also available as a module ( = code which can be | |
1814 | inserted and removed from the running kernel whenever you want). The | |
74b4f042 | 1815 | module will be called pxafb. If you want to compile it as a module, |
39f5fb30 | 1816 | say M here and read <file:Documentation/kbuild/modules.txt>. |
1da177e4 LT |
1817 | |
1818 | If unsure, say N. | |
1819 | ||
3c42a449 EM |
1820 | config FB_PXA_SMARTPANEL |
1821 | bool "PXA Smartpanel LCD support" | |
7f1133cb | 1822 | default n |
3c42a449 EM |
1823 | depends on FB_PXA |
1824 | ||
1da177e4 LT |
1825 | config FB_PXA_PARAMETERS |
1826 | bool "PXA LCD command line parameters" | |
1827 | default n | |
1828 | depends on FB_PXA | |
1829 | ---help--- | |
1830 | Enable the use of kernel command line or module parameters | |
1831 | to configure the physical properties of the LCD panel when | |
1832 | using the PXA LCD driver. | |
1833 | ||
1834 | This option allows you to override the panel parameters | |
1835 | supplied by the platform in order to support multiple | |
1836 | different models of flatpanel. If you will only be using a | |
1837 | single model of flatpanel then you can safely leave this | |
1838 | option disabled. | |
1839 | ||
1840 | <file:Documentation/fb/pxafb.txt> describes the available parameters. | |
1841 | ||
22caf042 MR |
1842 | config FB_MBX |
1843 | tristate "2700G LCD framebuffer support" | |
1844 | depends on FB && ARCH_PXA | |
1845 | select FB_CFB_FILLRECT | |
1846 | select FB_CFB_COPYAREA | |
1847 | select FB_CFB_IMAGEBLIT | |
1848 | ---help--- | |
1849 | Framebuffer driver for the Intel 2700G (Marathon) Graphics | |
1850 | Accelerator | |
1851 | ||
1852 | config FB_MBX_DEBUG | |
1853 | bool "Enable debugging info via debugfs" | |
1854 | depends on FB_MBX && DEBUG_FS | |
1855 | default n | |
1856 | ---help--- | |
1857 | Enable this if you want debugging information using the debug | |
1858 | filesystem (debugfs) | |
1859 | ||
1860 | If unsure, say N. | |
1861 | ||
9b53a9e2 YS |
1862 | config FB_FSL_DIU |
1863 | tristate "Freescale DIU framebuffer support" | |
1864 | depends on FB && FSL_SOC | |
1865 | select FB_CFB_FILLRECT | |
1866 | select FB_CFB_COPYAREA | |
1867 | select FB_CFB_IMAGEBLIT | |
1868 | select PPC_LIB_RHEAP | |
1869 | ---help--- | |
1870 | Framebuffer driver for the Freescale SoC DIU | |
1871 | ||
ecc41d5e RD |
1872 | config FB_W100 |
1873 | tristate "W100 frame buffer support" | |
e5dd3cbd | 1874 | depends on FB && ARCH_PXA |
ecc41d5e RD |
1875 | select FB_CFB_FILLRECT |
1876 | select FB_CFB_COPYAREA | |
1877 | select FB_CFB_IMAGEBLIT | |
ecc41d5e RD |
1878 | ---help--- |
1879 | Frame buffer driver for the w100 as found on the Sharp SL-Cxx series. | |
e5dd3cbd | 1880 | It can also drive the w3220 chip found on iPAQ hx4700. |
ecc41d5e RD |
1881 | |
1882 | This driver is also available as a module ( = code which can be | |
1883 | inserted and removed from the running kernel whenever you want). The | |
74b4f042 | 1884 | module will be called w100fb. If you want to compile it as a module, |
39f5fb30 | 1885 | say M here and read <file:Documentation/kbuild/modules.txt>. |
ecc41d5e RD |
1886 | |
1887 | If unsure, say N. | |
1da177e4 | 1888 | |
cfb4f5d1 MD |
1889 | config FB_SH_MOBILE_LCDC |
1890 | tristate "SuperH Mobile LCDC framebuffer support" | |
1891 | depends on FB && SUPERH | |
1892 | select FB_CFB_FILLRECT | |
1893 | select FB_CFB_COPYAREA | |
1894 | select FB_CFB_IMAGEBLIT | |
1895 | default m | |
1896 | ---help--- | |
1897 | Frame buffer driver for the on-chip SH-Mobile LCD controller. | |
1898 | ||
20fd5767 AP |
1899 | config FB_S3C2410 |
1900 | tristate "S3C2410 LCD framebuffer support" | |
1901 | depends on FB && ARCH_S3C2410 | |
1902 | select FB_CFB_FILLRECT | |
1903 | select FB_CFB_COPYAREA | |
1904 | select FB_CFB_IMAGEBLIT | |
20fd5767 AP |
1905 | ---help--- |
1906 | Frame buffer driver for the built-in LCD controller in the Samsung | |
1907 | S3C2410 processor. | |
1908 | ||
1909 | This driver is also available as a module ( = code which can be | |
1910 | inserted and removed from the running kernel whenever you want). The | |
1911 | module will be called s3c2410fb. If you want to compile it as a module, | |
39f5fb30 | 1912 | say M here and read <file:Documentation/kbuild/modules.txt>. |
20fd5767 AP |
1913 | |
1914 | If unsure, say N. | |
1915 | config FB_S3C2410_DEBUG | |
1916 | bool "S3C2410 lcd debug messages" | |
1917 | depends on FB_S3C2410 | |
1918 | help | |
1919 | Turn on debugging messages. Note that you can set/unset at run time | |
1920 | through sysfs | |
1921 | ||
5fc404e4 BD |
1922 | config FB_SM501 |
1923 | tristate "Silicon Motion SM501 framebuffer support" | |
1924 | depends on FB && MFD_SM501 | |
1925 | select FB_CFB_FILLRECT | |
1926 | select FB_CFB_COPYAREA | |
1927 | select FB_CFB_IMAGEBLIT | |
1928 | ---help--- | |
1929 | Frame buffer driver for the CRT and LCD controllers in the Silicon | |
1930 | Motion SM501. | |
1931 | ||
1932 | This driver is also available as a module ( = code which can be | |
1933 | inserted and removed from the running kernel whenever you want). The | |
1934 | module will be called sm501fb. If you want to compile it as a module, | |
e403149c | 1935 | say M here and read <file:Documentation/kbuild/modules.txt>. |
5fc404e4 BD |
1936 | |
1937 | If unsure, say N. | |
1938 | ||
1939 | ||
36c9366e VW |
1940 | config FB_PNX4008_DUM |
1941 | tristate "Display Update Module support on Philips PNX4008 board" | |
1942 | depends on FB && ARCH_PNX4008 | |
1943 | ---help--- | |
1944 | Say Y here to enable support for PNX4008 Display Update Module (DUM) | |
1945 | ||
1946 | config FB_PNX4008_DUM_RGB | |
1947 | tristate "RGB Framebuffer support on Philips PNX4008 board" | |
1948 | depends on FB_PNX4008_DUM | |
1949 | select FB_CFB_FILLRECT | |
1950 | select FB_CFB_COPYAREA | |
1951 | select FB_CFB_IMAGEBLIT | |
1952 | ---help--- | |
1953 | Say Y here to enable support for PNX4008 RGB Framebuffer | |
1954 | ||
a3d89983 PM |
1955 | config FB_IBM_GXT4500 |
1956 | tristate "Framebuffer support for IBM GXT4500P adaptor" | |
0058f479 | 1957 | depends on FB && PPC |
a3d89983 PM |
1958 | select FB_CFB_FILLRECT |
1959 | select FB_CFB_COPYAREA | |
1960 | select FB_CFB_IMAGEBLIT | |
1961 | ---help--- | |
1962 | Say Y here to enable support for the IBM GXT4500P display | |
1963 | adaptor, found on some IBM System P (pSeries) machines. | |
1964 | ||
310d8c11 | 1965 | config FB_PS3 |
9e6b99bd GU |
1966 | tristate "PS3 GPU framebuffer driver" |
1967 | depends on FB && PS3_PS3AV | |
92c4579d GU |
1968 | select FB_SYS_FILLRECT |
1969 | select FB_SYS_COPYAREA | |
1970 | select FB_SYS_IMAGEBLIT | |
1971 | select FB_SYS_FOPS | |
23e9c94c | 1972 | select VT_HW_CONSOLE_BINDING if FRAMEBUFFER_CONSOLE |
310d8c11 GU |
1973 | ---help--- |
1974 | Include support for the virtual frame buffer in the PS3 platform. | |
1975 | ||
1976 | config FB_PS3_DEFAULT_SIZE_M | |
1977 | int "PS3 default frame buffer size (in MiB)" | |
1978 | depends on FB_PS3 | |
50b2529e | 1979 | default 9 |
310d8c11 GU |
1980 | ---help--- |
1981 | This is the default size (in MiB) of the virtual frame buffer in | |
1982 | the PS3. | |
1983 | The default value can be overridden on the kernel command line | |
1984 | using the "ps3fb" option (e.g. "ps3fb=9M"); | |
1985 | ||
147394c8 AK |
1986 | config FB_XILINX |
1987 | tristate "Xilinx frame buffer support" | |
1988 | depends on FB && XILINX_VIRTEX | |
1989 | select FB_CFB_FILLRECT | |
1990 | select FB_CFB_COPYAREA | |
1991 | select FB_CFB_IMAGEBLIT | |
1992 | ---help--- | |
1993 | Include support for the Xilinx ML300/ML403 reference design | |
1994 | framebuffer. ML300 carries a 640*480 LCD display on the board, | |
1995 | ML403 uses a standard DB15 VGA connector. | |
1996 | ||
5abe3b40 YY |
1997 | config FB_COBALT |
1998 | tristate "Cobalt server LCD frame buffer support" | |
1999 | depends on FB && MIPS_COBALT | |
2000 | ||
4a25e418 NI |
2001 | config FB_SH7760 |
2002 | bool "SH7760/SH7763 LCDC support" | |
2003 | depends on FB && (CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7763) | |
2004 | select FB_CFB_FILLRECT | |
2005 | select FB_CFB_COPYAREA | |
2006 | select FB_CFB_IMAGEBLIT | |
2007 | help | |
2008 | Support for the SH7760/SH7763 integrated (D)STN/TFT LCD Controller. | |
2009 | Supports display resolutions up to 1024x1024 pixel, grayscale and | |
2010 | color operation, with depths ranging from 1 bpp to 8 bpp monochrome | |
2011 | and 8, 15 or 16 bpp color; 90 degrees clockwise display rotation for | |
2012 | panels <= 320 pixel horizontal resolution. | |
2013 | ||
1da177e4 LT |
2014 | config FB_VIRTUAL |
2015 | tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)" | |
2016 | depends on FB | |
87b48849 AD |
2017 | select FB_SYS_FILLRECT |
2018 | select FB_SYS_COPYAREA | |
2019 | select FB_SYS_IMAGEBLIT | |
52102c07 | 2020 | select FB_SYS_FOPS |
1da177e4 LT |
2021 | ---help--- |
2022 | This is a `virtual' frame buffer device. It operates on a chunk of | |
2023 | unswappable kernel memory instead of on the memory of a graphics | |
2024 | board. This means you cannot see any output sent to this frame | |
2025 | buffer device, while it does consume precious memory. The main use | |
2026 | of this frame buffer device is testing and debugging the frame | |
2027 | buffer subsystem. Do NOT enable it for normal systems! To protect | |
2028 | the innocent, it has to be enabled explicitly at boot time using the | |
2029 | kernel option `video=vfb:'. | |
2030 | ||
2031 | To compile this driver as a module, choose M here: the | |
66cf7512 MF |
2032 | module will be called vfb. In order to load it, you must use |
2033 | the vfb_enable=1 option. | |
1da177e4 LT |
2034 | |
2035 | If unsure, say N. | |
e0e34ef7 | 2036 | |
4ee36dc0 MA |
2037 | config XEN_FBDEV_FRONTEND |
2038 | tristate "Xen virtual frame buffer support" | |
2039 | depends on FB && XEN | |
2040 | select FB_SYS_FILLRECT | |
2041 | select FB_SYS_COPYAREA | |
2042 | select FB_SYS_IMAGEBLIT | |
2043 | select FB_SYS_FOPS | |
2044 | select FB_DEFERRED_IO | |
2045 | default y | |
2046 | help | |
2047 | This driver implements the front-end of the Xen virtual | |
2048 | frame buffer driver. It communicates with a back-end | |
2049 | in another domain. | |
2050 | ||
e9355085 JK |
2051 | config FB_METRONOME |
2052 | tristate "E-Ink Metronome/8track controller support" | |
2053 | depends on FB | |
2054 | select FB_SYS_FILLRECT | |
2055 | select FB_SYS_COPYAREA | |
2056 | select FB_SYS_IMAGEBLIT | |
2057 | select FB_SYS_FOPS | |
2058 | select FB_DEFERRED_IO | |
2059 | help | |
2060 | This driver implements support for the E-Ink Metronome | |
2061 | controller. The pre-release name for this device was 8track | |
2062 | and could also have been called by some vendors as PVI-nnnn. | |
2063 | ||
f08f3895 | 2064 | source "drivers/video/omap/Kconfig" |
0058f479 | 2065 | |
179b025f RD |
2066 | source "drivers/video/backlight/Kconfig" |
2067 | source "drivers/video/display/Kconfig" | |
2068 | ||
1da177e4 LT |
2069 | if VT |
2070 | source "drivers/video/console/Kconfig" | |
2071 | endif | |
2072 | ||
2073 | if FB || SGI_NEWPORT_CONSOLE | |
2074 | source "drivers/video/logo/Kconfig" | |
2075 | endif | |
2076 | ||
1da177e4 | 2077 | endmenu |