]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | # |
2 | # Video configuration | |
3 | # | |
4 | ||
5 | menu "Graphics support" | |
e25df120 | 6 | depends on HAS_IOMEM |
1da177e4 | 7 | |
8f27489d | 8 | source "drivers/video/backlight/Kconfig" |
2ee12163 | 9 | source "drivers/video/display/Kconfig" |
ba70710e | 10 | |
b2f594fd AD |
11 | config VGASTATE |
12 | tristate | |
13 | default n | |
14 | ||
1da177e4 LT |
15 | config FB |
16 | tristate "Support for frame buffer devices" | |
17 | ---help--- | |
18 | The frame buffer device provides an abstraction for the graphics | |
19 | hardware. It represents the frame buffer of some video hardware and | |
20 | allows application software to access the graphics hardware through | |
21 | a well-defined interface, so the software doesn't need to know | |
22 | anything about the low-level (hardware register) stuff. | |
23 | ||
24 | Frame buffer devices work identically across the different | |
25 | architectures supported by Linux and make the implementation of | |
26 | application programs easier and more portable; at this point, an X | |
27 | server exists which uses the frame buffer device exclusively. | |
28 | On several non-X86 architectures, the frame buffer device is the | |
29 | only way to use the graphics hardware. | |
30 | ||
31 | The device is accessed through special device nodes, usually located | |
32 | in the /dev directory, i.e. /dev/fb*. | |
33 | ||
34 | You need an utility program called fbset to make full use of frame | |
35 | buffer devices. Please read <file:Documentation/fb/framebuffer.txt> | |
36 | and the Framebuffer-HOWTO at | |
37 | <http://www.tahallah.demon.co.uk/programming/prog.html> for more | |
38 | information. | |
39 | ||
40 | Say Y here and to the driver for your graphics board below if you | |
41 | are compiling a kernel for a non-x86 architecture. | |
42 | ||
43 | If you are compiling for the x86 architecture, you can say Y if you | |
44 | want to play with it, but it is not essential. Please note that | |
45 | running graphical applications that directly touch the hardware | |
46 | (e.g. an accelerated X server) and that are not frame buffer | |
47 | device-aware may cause unexpected results. If unsure, say N. | |
48 | ||
e0e34ef7 JS |
49 | config FIRMWARE_EDID |
50 | bool "Enable firmware EDID" | |
51 | depends on FB | |
52 | default n | |
53 | ---help--- | |
54 | This enables access to the EDID transferred from the firmware. | |
55 | On the i386, this is from the Video BIOS. Enable this if DDC/I2C | |
56 | transfers do not work for your driver and if you are using | |
57 | nvidiafb, i810fb or savagefb. | |
58 | ||
59 | In general, choosing Y for this option is safe. If you | |
60 | experience extremely long delays while booting before you get | |
61 | something on your display, try setting this to N. Matrox cards in | |
62 | combination with certain motherboards and monitors are known to | |
63 | suffer from this problem. | |
64 | ||
fc5891c8 DM |
65 | config FB_DDC |
66 | tristate | |
e0e34ef7 JS |
67 | depends on FB |
68 | select I2C_ALGOBIT | |
69 | select I2C | |
fc5891c8 DM |
70 | default n |
71 | ||
1da177e4 LT |
72 | config FB_CFB_FILLRECT |
73 | tristate | |
74 | depends on FB | |
75 | default n | |
76 | ---help--- | |
77 | Include the cfb_fillrect function for generic software rectangle | |
78 | filling. This is used by drivers that don't provide their own | |
79 | (accelerated) version. | |
80 | ||
81 | config FB_CFB_COPYAREA | |
82 | tristate | |
83 | depends on FB | |
84 | default n | |
85 | ---help--- | |
86 | Include the cfb_copyarea function for generic software area copying. | |
87 | This is used by drivers that don't provide their own (accelerated) | |
88 | version. | |
89 | ||
90 | config FB_CFB_IMAGEBLIT | |
91 | tristate | |
92 | depends on FB | |
93 | default n | |
94 | ---help--- | |
95 | Include the cfb_imageblit function for generic software image | |
96 | blitting. This is used by drivers that don't provide their own | |
97 | (accelerated) version. | |
98 | ||
68648ed1 AD |
99 | config FB_SYS_FILLRECT |
100 | tristate | |
101 | depends on FB | |
102 | default n | |
103 | ---help--- | |
104 | Include the sys_fillrect function for generic software rectangle | |
105 | filling. This is used by drivers that don't provide their own | |
106 | (accelerated) version and the framebuffer is in system RAM. | |
107 | ||
108 | config FB_SYS_COPYAREA | |
109 | tristate | |
110 | depends on FB | |
111 | default n | |
112 | ---help--- | |
113 | Include the sys_copyarea function for generic software area copying. | |
114 | This is used by drivers that don't provide their own (accelerated) | |
115 | version and the framebuffer is in system RAM. | |
116 | ||
117 | config FB_SYS_IMAGEBLIT | |
118 | tristate | |
119 | depends on FB | |
120 | default n | |
121 | ---help--- | |
122 | Include the sys_imageblit function for generic software image | |
123 | blitting. This is used by drivers that don't provide their own | |
124 | (accelerated) version and the framebuffer is in system RAM. | |
125 | ||
09aaf268 AD |
126 | config FB_SYS_FOPS |
127 | tristate | |
128 | depends on FB | |
129 | default n | |
130 | ||
60b59bea JK |
131 | config FB_DEFERRED_IO |
132 | bool | |
133 | depends on FB | |
134 | default y | |
135 | ||
a268422d OZ |
136 | config FB_SVGALIB |
137 | tristate | |
138 | depends on FB | |
139 | default n | |
140 | ---help--- | |
141 | Common utility functions useful to fbdev drivers of VGA-based | |
142 | cards. | |
143 | ||
1da177e4 LT |
144 | config FB_MACMODES |
145 | tristate | |
146 | depends on FB | |
147 | default n | |
148 | ||
5474c120 | 149 | config FB_BACKLIGHT |
4b755999 MH |
150 | bool |
151 | depends on FB | |
152 | select BACKLIGHT_LCD_SUPPORT | |
153 | select BACKLIGHT_CLASS_DEVICE | |
154 | default n | |
5474c120 | 155 | |
1da177e4 LT |
156 | config FB_MODE_HELPERS |
157 | bool "Enable Video Mode Handling Helpers" | |
158 | depends on FB | |
159 | default n | |
160 | ---help--- | |
161 | This enables functions for handling video modes using the | |
162 | Generalized Timing Formula and the EDID parser. A few drivers rely | |
163 | on this feature such as the radeonfb, rivafb, and the i810fb. If | |
164 | your driver does not take advantage of this feature, choosing Y will | |
165 | just increase the kernel size by about 5K. | |
166 | ||
167 | config FB_TILEBLITTING | |
168 | bool "Enable Tile Blitting Support" | |
169 | depends on FB | |
170 | default n | |
171 | ---help--- | |
172 | This enables tile blitting. Tile blitting is a drawing technique | |
173 | where the screen is divided into rectangular sections (tiles), whereas | |
174 | the standard blitting divides the screen into pixels. Because the | |
175 | default drawing element is a tile, drawing functions will be passed | |
176 | parameters in terms of number of tiles instead of number of pixels. | |
177 | For example, to draw a single character, instead of using bitmaps, | |
178 | an index to an array of bitmaps will be used. To clear or move a | |
179 | rectangular section of a screen, the rectangle will be described in | |
180 | terms of number of tiles in the x- and y-axis. | |
181 | ||
182 | This is particularly important to one driver, matroxfb. If | |
183 | unsure, say N. | |
184 | ||
10ccaf4b | 185 | comment "Frame buffer hardware drivers" |
e0e34ef7 JS |
186 | depends on FB |
187 | ||
1da177e4 LT |
188 | config FB_CIRRUS |
189 | tristate "Cirrus Logic support" | |
190 | depends on FB && (ZORRO || PCI) | |
191 | select FB_CFB_FILLRECT | |
192 | select FB_CFB_COPYAREA | |
193 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
194 | ---help--- |
195 | This enables support for Cirrus Logic GD542x/543x based boards on | |
196 | Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum. | |
197 | ||
198 | If you have a PCI-based system, this enables support for these | |
199 | chips: GD-543x, GD-544x, GD-5480. | |
200 | ||
201 | Please read the file <file:Documentation/fb/cirrusfb.txt>. | |
202 | ||
203 | Say N unless you have such a graphics board or plan to get one | |
204 | before you next recompile the kernel. | |
205 | ||
206 | config FB_PM2 | |
207 | tristate "Permedia2 support" | |
208 | depends on FB && ((AMIGA && BROKEN) || PCI) | |
209 | select FB_CFB_FILLRECT | |
210 | select FB_CFB_COPYAREA | |
211 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
212 | help |
213 | This is the frame buffer device driver for the Permedia2 AGP frame | |
214 | buffer card from ASK, aka `Graphic Blaster Exxtreme'. There is a | |
215 | product page at | |
216 | <http://www.ask.com.hk/product/Permedia%202/permedia2.htm>. | |
217 | ||
218 | config FB_PM2_FIFO_DISCONNECT | |
219 | bool "enable FIFO disconnect feature" | |
220 | depends on FB_PM2 && PCI | |
221 | help | |
222 | Support the Permedia2 FIFO disconnect feature (see CONFIG_FB_PM2). | |
223 | ||
224 | config FB_ARMCLCD | |
225 | tristate "ARM PrimeCell PL110 support" | |
226 | depends on FB && ARM && ARM_AMBA | |
227 | select FB_CFB_FILLRECT | |
228 | select FB_CFB_COPYAREA | |
229 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
230 | help |
231 | This framebuffer device driver is for the ARM PrimeCell PL110 | |
232 | Colour LCD controller. ARM PrimeCells provide the building | |
233 | blocks for System on a Chip devices. | |
234 | ||
235 | If you want to compile this as a module (=code which can be | |
236 | inserted into and removed from the running kernel), say M | |
39f5fb30 | 237 | here and read <file:Documentation/kbuild/modules.txt>. The module |
1da177e4 LT |
238 | will be called amba-clcd. |
239 | ||
903e2bbd MS |
240 | choice |
241 | ||
242 | depends on FB_ARMCLCD && (ARCH_LH7A40X || ARCH_LH7952X) | |
243 | prompt "LCD Panel" | |
244 | default FB_ARMCLCD_SHARP_LQ035Q7DB02 | |
245 | ||
246 | config FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT | |
247 | bool "LogicPD LCD 3.5\" QVGA w/HRTFT IC" | |
248 | help | |
249 | This is an implementation of the Sharp LQ035Q7DB02, a 3.5" | |
cab00891 | 250 | color QVGA, HRTFT panel. The LogicPD device includes |
903e2bbd MS |
251 | an integrated HRTFT controller IC. |
252 | The native resolution is 240x320. | |
253 | ||
254 | config FB_ARMCLCD_SHARP_LQ057Q3DC02 | |
255 | bool "LogicPD LCD 5.7\" QVGA" | |
256 | help | |
257 | This is an implementation of the Sharp LQ057Q3DC02, a 5.7" | |
258 | color QVGA, TFT panel. The LogicPD device includes an | |
259 | The native resolution is 320x240. | |
260 | ||
261 | config FB_ARMCLCD_SHARP_LQ64D343 | |
262 | bool "LogicPD LCD 6.4\" VGA" | |
263 | help | |
264 | This is an implementation of the Sharp LQ64D343, a 6.4" | |
265 | color VGA, TFT panel. The LogicPD device includes an | |
266 | The native resolution is 640x480. | |
267 | ||
268 | config FB_ARMCLCD_SHARP_LQ10D368 | |
269 | bool "LogicPD LCD 10.4\" VGA" | |
270 | help | |
271 | This is an implementation of the Sharp LQ10D368, a 10.4" | |
272 | color VGA, TFT panel. The LogicPD device includes an | |
273 | The native resolution is 640x480. | |
274 | ||
275 | ||
276 | config FB_ARMCLCD_SHARP_LQ121S1DG41 | |
277 | bool "LogicPD LCD 12.1\" SVGA" | |
278 | help | |
279 | This is an implementation of the Sharp LQ121S1DG41, a 12.1" | |
280 | color SVGA, TFT panel. The LogicPD device includes an | |
281 | The native resolution is 800x600. | |
282 | ||
283 | This panel requires a clock rate may be an integer fraction | |
284 | of the base LCDCLK frequency. The driver will select the | |
285 | highest frequency available that is lower than the maximum | |
286 | allowed. The panel may flicker if the clock rate is | |
287 | slower than the recommended minimum. | |
288 | ||
289 | config FB_ARMCLCD_AUO_A070VW01_WIDE | |
290 | bool "AU Optronics A070VW01 LCD 7.0\" WIDE" | |
291 | help | |
292 | This is an implementation of the AU Optronics, a 7.0" | |
293 | WIDE Color. The native resolution is 234x480. | |
294 | ||
295 | config FB_ARMCLCD_HITACHI | |
296 | bool "Hitachi Wide Screen 800x480" | |
297 | help | |
298 | This is an implementation of the Hitachi 800x480. | |
299 | ||
300 | endchoice | |
301 | ||
302 | ||
1da177e4 LT |
303 | config FB_ACORN |
304 | bool "Acorn VIDC support" | |
305 | depends on (FB = y) && ARM && (ARCH_ACORN || ARCH_CLPS7500) | |
306 | select FB_CFB_FILLRECT | |
307 | select FB_CFB_COPYAREA | |
308 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
309 | help |
310 | This is the frame buffer device driver for the Acorn VIDC graphics | |
311 | hardware found in Acorn RISC PCs and other ARM-based machines. If | |
312 | unsure, say N. | |
313 | ||
314 | config FB_CLPS711X | |
315 | bool "CLPS711X LCD support" | |
316 | depends on (FB = y) && ARM && ARCH_CLPS711X | |
317 | select FB_CFB_FILLRECT | |
318 | select FB_CFB_COPYAREA | |
319 | select FB_CFB_IMAGEBLIT | |
e65c0850 RD |
320 | help |
321 | Say Y to enable the Framebuffer driver for the CLPS7111 and | |
322 | EP7212 processors. | |
1da177e4 LT |
323 | |
324 | config FB_SA1100 | |
325 | bool "SA-1100 LCD support" | |
326 | depends on (FB = y) && ARM && ARCH_SA1100 | |
327 | select FB_CFB_FILLRECT | |
328 | select FB_CFB_COPYAREA | |
329 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
330 | help |
331 | This is a framebuffer device for the SA-1100 LCD Controller. | |
332 | See <http://www.linux-fbdev.org/> for information on framebuffer | |
333 | devices. | |
334 | ||
335 | If you plan to use the LCD display with your SA-1100 system, say | |
336 | Y here. | |
337 | ||
7c2f891c SH |
338 | config FB_IMX |
339 | tristate "Motorola i.MX LCD support" | |
340 | depends on FB && ARM && ARCH_IMX | |
341 | select FB_CFB_FILLRECT | |
342 | select FB_CFB_COPYAREA | |
343 | select FB_CFB_IMAGEBLIT | |
7c2f891c | 344 | |
1da177e4 LT |
345 | config FB_CYBER2000 |
346 | tristate "CyberPro 2000/2010/5000 support" | |
347 | depends on FB && PCI && (BROKEN || !SPARC64) | |
348 | select FB_CFB_FILLRECT | |
349 | select FB_CFB_COPYAREA | |
350 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
351 | help |
352 | This enables support for the Integraphics CyberPro 20x0 and 5000 | |
353 | VGA chips used in the Rebel.com Netwinder and other machines. | |
354 | Say Y if you have a NetWinder or a graphics card containing this | |
355 | device, otherwise say N. | |
356 | ||
357 | config FB_APOLLO | |
358 | bool | |
359 | depends on (FB = y) && APOLLO | |
360 | default y | |
361 | select FB_CFB_FILLRECT | |
362 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
363 | |
364 | config FB_Q40 | |
365 | bool | |
366 | depends on (FB = y) && Q40 | |
367 | default y | |
368 | select FB_CFB_FILLRECT | |
369 | select FB_CFB_COPYAREA | |
370 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
371 | |
372 | config FB_AMIGA | |
373 | tristate "Amiga native chipset support" | |
374 | depends on FB && AMIGA | |
1da177e4 LT |
375 | help |
376 | This is the frame buffer device driver for the builtin graphics | |
377 | chipset found in Amigas. | |
378 | ||
379 | To compile this driver as a module, choose M here: the | |
380 | module will be called amifb. | |
381 | ||
382 | config FB_AMIGA_OCS | |
383 | bool "Amiga OCS chipset support" | |
384 | depends on FB_AMIGA | |
385 | help | |
386 | This enables support for the original Agnus and Denise video chips, | |
387 | found in the Amiga 1000 and most A500's and A2000's. If you intend | |
388 | to run Linux on any of these systems, say Y; otherwise say N. | |
389 | ||
390 | config FB_AMIGA_ECS | |
391 | bool "Amiga ECS chipset support" | |
392 | depends on FB_AMIGA | |
393 | help | |
394 | This enables support for the Enhanced Chip Set, found in later | |
395 | A500's, later A2000's, the A600, the A3000, the A3000T and CDTV. If | |
396 | you intend to run Linux on any of these systems, say Y; otherwise | |
397 | say N. | |
398 | ||
399 | config FB_AMIGA_AGA | |
400 | bool "Amiga AGA chipset support" | |
401 | depends on FB_AMIGA | |
402 | help | |
403 | This enables support for the Advanced Graphics Architecture (also | |
404 | known as the AGA or AA) Chip Set, found in the A1200, A4000, A4000T | |
405 | and CD32. If you intend to run Linux on any of these systems, say Y; | |
406 | otherwise say N. | |
407 | ||
1da177e4 LT |
408 | config FB_FM2 |
409 | bool "Amiga FrameMaster II/Rainbow II support" | |
410 | depends on (FB = y) && ZORRO | |
411 | select FB_CFB_FILLRECT | |
412 | select FB_CFB_COPYAREA | |
413 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
414 | help |
415 | This is the frame buffer device driver for the Amiga FrameMaster | |
416 | card from BSC (exhibited 1992 but not shipped as a CBM product). | |
417 | ||
1154ea7d JK |
418 | config FB_ARC |
419 | tristate "Arc Monochrome LCD board support" | |
420 | depends on FB && X86 | |
922e6f9a AD |
421 | select FB_SYS_FILLRECT |
422 | select FB_SYS_COPYAREA | |
423 | select FB_SYS_IMAGEBLIT | |
d9a05f18 | 424 | select FB_SYS_FOPS |
1154ea7d JK |
425 | help |
426 | This enables support for the Arc Monochrome LCD board. The board | |
427 | is based on the KS-108 lcd controller and is typically a matrix | |
428 | of 2*n chips. This driver was tested with a 128x64 panel. This | |
429 | driver supports it for use with x86 SBCs through a 16 bit GPIO | |
09509603 | 430 | interface (8 bit data, 8 bit control). If you anticipate using |
1154ea7d JK |
431 | this driver, say Y or M; otherwise say N. You must specify the |
432 | GPIO IO address to be used for setting control and data. | |
433 | ||
1da177e4 LT |
434 | config FB_ATARI |
435 | bool "Atari native chipset support" | |
a1005012 MS |
436 | depends on (FB = y) && ATARI |
437 | select FB_CFB_FILLRECT | |
438 | select FB_CFB_COPYAREA | |
439 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
440 | help |
441 | This is the frame buffer device driver for the builtin graphics | |
442 | chipset found in Ataris. | |
443 | ||
444 | config FB_OF | |
445 | bool "Open Firmware frame buffer device support" | |
bed59275 | 446 | depends on (FB = y) && (PPC64 || PPC_OF) && (!PPC_PSERIES || PCI) |
1da177e4 LT |
447 | select FB_CFB_FILLRECT |
448 | select FB_CFB_COPYAREA | |
449 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
450 | select FB_MACMODES |
451 | help | |
452 | Say Y if you want support with Open Firmware for your graphics | |
453 | board. | |
454 | ||
455 | config FB_CONTROL | |
456 | bool "Apple \"control\" display support" | |
a04b61d3 | 457 | depends on (FB = y) && PPC_PMAC && PPC32 |
1da177e4 LT |
458 | select FB_CFB_FILLRECT |
459 | select FB_CFB_COPYAREA | |
460 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
461 | select FB_MACMODES |
462 | help | |
463 | This driver supports a frame buffer for the graphics adapter in the | |
464 | Power Macintosh 7300 and others. | |
465 | ||
466 | config FB_PLATINUM | |
467 | bool "Apple \"platinum\" display support" | |
a04b61d3 | 468 | depends on (FB = y) && PPC_PMAC && PPC32 |
1da177e4 LT |
469 | select FB_CFB_FILLRECT |
470 | select FB_CFB_COPYAREA | |
471 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
472 | select FB_MACMODES |
473 | help | |
474 | This driver supports a frame buffer for the "platinum" graphics | |
475 | adapter in some Power Macintoshes. | |
476 | ||
477 | config FB_VALKYRIE | |
478 | bool "Apple \"valkyrie\" display support" | |
a04b61d3 | 479 | depends on (FB = y) && (MAC || (PPC_PMAC && PPC32)) |
1da177e4 LT |
480 | select FB_CFB_FILLRECT |
481 | select FB_CFB_COPYAREA | |
482 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
483 | select FB_MACMODES |
484 | help | |
485 | This driver supports a frame buffer for the "valkyrie" graphics | |
486 | adapter in some Power Macintoshes. | |
487 | ||
488 | config FB_CT65550 | |
489 | bool "Chips 65550 display support" | |
a04b61d3 | 490 | depends on (FB = y) && PPC32 |
1da177e4 LT |
491 | select FB_CFB_FILLRECT |
492 | select FB_CFB_COPYAREA | |
493 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
494 | help |
495 | This is the frame buffer device driver for the Chips & Technologies | |
496 | 65550 graphics chip in PowerBooks. | |
497 | ||
498 | config FB_ASILIANT | |
e65c0850 | 499 | bool "Asiliant (Chips) 69000 display support" |
1da177e4 LT |
500 | depends on (FB = y) && PCI |
501 | select FB_CFB_FILLRECT | |
502 | select FB_CFB_COPYAREA | |
503 | select FB_CFB_IMAGEBLIT | |
4de0b1ee AD |
504 | help |
505 | This is the frame buffer device driver for the Asiliant 69030 chipset | |
1da177e4 LT |
506 | |
507 | config FB_IMSTT | |
508 | bool "IMS Twin Turbo display support" | |
509 | depends on (FB = y) && PCI | |
510 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
511 | select FB_MACMODES if PPC |
512 | help | |
513 | The IMS Twin Turbo is a PCI-based frame buffer card bundled with | |
514 | many Macintosh and compatible computers. | |
515 | ||
1da177e4 LT |
516 | config FB_VGA16 |
517 | tristate "VGA 16-color graphics support" | |
518 | depends on FB && (X86 || PPC) | |
519 | select FB_CFB_FILLRECT | |
520 | select FB_CFB_COPYAREA | |
521 | select FB_CFB_IMAGEBLIT | |
b2f594fd | 522 | select VGASTATE |
d60d2d8a | 523 | select FONT_8x16 if FRAMEBUFFER_CONSOLE |
1da177e4 LT |
524 | help |
525 | This is the frame buffer device driver for VGA 16 color graphic | |
526 | cards. Say Y if you have such a card. | |
527 | ||
528 | To compile this driver as a module, choose M here: the | |
529 | module will be called vga16fb. | |
530 | ||
531 | config FB_STI | |
532 | tristate "HP STI frame buffer device support" | |
533 | depends on FB && PARISC | |
534 | select FB_CFB_FILLRECT | |
535 | select FB_CFB_COPYAREA | |
536 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
537 | default y |
538 | ---help--- | |
539 | STI refers to the HP "Standard Text Interface" which is a set of | |
540 | BIOS routines contained in a ROM chip in HP PA-RISC based machines. | |
541 | Enabling this option will implement the linux framebuffer device | |
542 | using calls to the STI BIOS routines for initialisation. | |
543 | ||
544 | If you enable this option, you will get a planar framebuffer device | |
545 | /dev/fb which will work on the most common HP graphic cards of the | |
546 | NGLE family, including the artist chips (in the 7xx and Bxxx series), | |
547 | HCRX, HCRX24, CRX, CRX24 and VisEG series. | |
548 | ||
549 | It is safe to enable this option, so you should probably say "Y". | |
550 | ||
551 | config FB_MAC | |
552 | bool "Generic Macintosh display support" | |
553 | depends on (FB = y) && MAC | |
554 | select FB_CFB_FILLRECT | |
555 | select FB_CFB_COPYAREA | |
556 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
557 | select FB_MACMODES |
558 | ||
559 | # bool ' Apple DAFB display support' CONFIG_FB_DAFB | |
560 | config FB_HP300 | |
561 | bool | |
562 | depends on (FB = y) && HP300 | |
563 | select FB_CFB_FILLRECT | |
564 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
565 | default y |
566 | ||
567 | config FB_TGA | |
86c6f7d0 MR |
568 | tristate "TGA/SFB+ framebuffer support" |
569 | depends on FB && (ALPHA || TC) | |
1da177e4 LT |
570 | select FB_CFB_FILLRECT |
571 | select FB_CFB_COPYAREA | |
572 | select FB_CFB_IMAGEBLIT | |
1c667682 | 573 | select BITREVERSE |
86c6f7d0 MR |
574 | ---help--- |
575 | This is the frame buffer device driver for generic TGA and SFB+ | |
576 | graphic cards. These include DEC ZLXp-E1, -E2 and -E3 PCI cards, | |
577 | also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3 | |
578 | TURBOchannel cards, also known as PMAGD-A, -B and -C. | |
579 | ||
580 | Due to hardware limitations ZLX-E2 and E3 cards are not supported | |
581 | for DECstation 5000/200 systems. Additionally due to firmware | |
582 | limitations these cards may cause troubles with booting DECstation | |
583 | 5000/240 and /260 systems, but are fully supported under Linux if | |
584 | you manage to get it going. ;-) | |
585 | ||
586 | Say Y if you have one of those. | |
1da177e4 LT |
587 | |
588 | config FB_VESA | |
589 | bool "VESA VGA graphics support" | |
0d078f6f | 590 | depends on (FB = y) && X86 |
1da177e4 LT |
591 | select FB_CFB_FILLRECT |
592 | select FB_CFB_COPYAREA | |
593 | select FB_CFB_IMAGEBLIT | |
c9b2ec4d | 594 | select VIDEO_SELECT |
1da177e4 LT |
595 | help |
596 | This is the frame buffer device driver for generic VESA 2.0 | |
597 | compliant graphic cards. The older VESA 1.2 cards are not supported. | |
598 | You will get a boot time penguin logo at no additional cost. Please | |
599 | read <file:Documentation/fb/vesafb.txt>. If unsure, say Y. | |
600 | ||
90b4f9ac EH |
601 | config FB_IMAC |
602 | bool "Intel-based Macintosh Framebuffer Support" | |
b64ef8af | 603 | depends on (FB = y) && X86 && EFI |
90b4f9ac EH |
604 | select FB_CFB_FILLRECT |
605 | select FB_CFB_COPYAREA | |
606 | select FB_CFB_IMAGEBLIT | |
607 | help | |
608 | This is the frame buffer device driver for the Intel-based Macintosh | |
609 | ||
aad09e51 JK |
610 | config FB_HECUBA |
611 | tristate "Hecuba board support" | |
612 | depends on FB && X86 && MMU | |
d6774935 AD |
613 | select FB_SYS_FILLRECT |
614 | select FB_SYS_COPYAREA | |
615 | select FB_SYS_IMAGEBLIT | |
28d4564b | 616 | select FB_SYS_FOPS |
aad09e51 JK |
617 | select FB_DEFERRED_IO |
618 | help | |
619 | This enables support for the Hecuba board. This driver was tested | |
620 | with an E-Ink 800x600 display and x86 SBCs through a 16 bit GPIO | |
621 | interface (8 bit data, 4 bit control). If you anticpate using | |
622 | this driver, say Y or M; otherwise say N. You must specify the | |
623 | GPIO IO address to be used for setting control and data. | |
624 | ||
1da177e4 LT |
625 | config FB_HGA |
626 | tristate "Hercules mono graphics support" | |
627 | depends on FB && X86 | |
628 | select FB_CFB_FILLRECT | |
629 | select FB_CFB_COPYAREA | |
630 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
631 | help |
632 | Say Y here if you have a Hercules mono graphics card. | |
633 | ||
634 | To compile this driver as a module, choose M here: the | |
635 | module will be called hgafb. | |
636 | ||
637 | As this card technology is 15 years old, most people will answer N | |
638 | here. | |
639 | ||
640 | config FB_HGA_ACCEL | |
641 | bool "Hercules mono Acceleration functions (EXPERIMENTAL)" | |
642 | depends on FB_HGA && EXPERIMENTAL | |
643 | ---help--- | |
644 | This will compile the Hercules mono graphics with | |
645 | acceleration functions. | |
646 | ||
1da177e4 LT |
647 | config FB_SGIVW |
648 | tristate "SGI Visual Workstation framebuffer support" | |
649 | depends on FB && X86_VISWS | |
650 | select FB_CFB_FILLRECT | |
651 | select FB_CFB_COPYAREA | |
652 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
653 | help |
654 | SGI Visual Workstation support for framebuffer graphics. | |
655 | ||
656 | config FB_GBE | |
657 | bool "SGI Graphics Backend frame buffer support" | |
658 | depends on (FB = y) && (SGI_IP32 || X86_VISWS) | |
659 | select FB_CFB_FILLRECT | |
660 | select FB_CFB_COPYAREA | |
661 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
662 | help |
663 | This is the frame buffer device driver for SGI Graphics Backend. | |
664 | This chip is used in SGI O2 and Visual Workstation 320/540. | |
665 | ||
666 | config FB_GBE_MEM | |
667 | int "Video memory size in MB" | |
668 | depends on FB_GBE | |
80c410dc | 669 | default 4 |
1da177e4 LT |
670 | help |
671 | This is the amount of memory reserved for the framebuffer, | |
672 | which can be any value between 1MB and 8MB. | |
673 | ||
1a571986 MF |
674 | config FB_SBUS |
675 | bool "SBUS and UPA framebuffers" | |
0b57ee9e | 676 | depends on (FB = y) && SPARC |
1a571986 MF |
677 | help |
678 | Say Y if you want support for SBUS or UPA based frame buffer device. | |
679 | ||
1da177e4 LT |
680 | config FB_BW2 |
681 | bool "BWtwo support" | |
e019630e | 682 | depends on (FB = y) && (SPARC && FB_SBUS) |
1da177e4 LT |
683 | select FB_CFB_FILLRECT |
684 | select FB_CFB_COPYAREA | |
685 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
686 | help |
687 | This is the frame buffer device driver for the BWtwo frame buffer. | |
688 | ||
689 | config FB_CG3 | |
690 | bool "CGthree support" | |
e019630e | 691 | depends on (FB = y) && (SPARC && FB_SBUS) |
1a571986 | 692 | select FB_CFB_FILLRECT |
1da177e4 LT |
693 | select FB_CFB_COPYAREA |
694 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
695 | help |
696 | This is the frame buffer device driver for the CGthree frame buffer. | |
697 | ||
698 | config FB_CG6 | |
699 | bool "CGsix (GX,TurboGX) support" | |
e019630e | 700 | depends on (FB = y) && (SPARC && FB_SBUS) |
1da177e4 LT |
701 | select FB_CFB_COPYAREA |
702 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
703 | help |
704 | This is the frame buffer device driver for the CGsix (GX, TurboGX) | |
705 | frame buffer. | |
706 | ||
707 | config FB_PVR2 | |
708 | tristate "NEC PowerVR 2 display support" | |
709 | depends on FB && SH_DREAMCAST | |
710 | select FB_CFB_FILLRECT | |
711 | select FB_CFB_COPYAREA | |
712 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
713 | ---help--- |
714 | Say Y here if you have a PowerVR 2 card in your box. If you plan to | |
715 | run linux on your Dreamcast, you will have to say Y here. | |
716 | This driver may or may not work on other PowerVR 2 cards, but is | |
717 | totally untested. Use at your own risk. If unsure, say N. | |
718 | ||
719 | To compile this driver as a module, choose M here: the | |
720 | module will be called pvr2fb. | |
721 | ||
722 | You can pass several parameters to the driver at boot time or at | |
723 | module load time. The parameters look like "video=pvr2:XXX", where | |
724 | the meaning of XXX can be found at the end of the main source file | |
725 | (<file:drivers/video/pvr2fb.c>). Please see the file | |
726 | <file:Documentation/fb/pvr2fb.txt>. | |
727 | ||
728 | config FB_EPSON1355 | |
729 | bool "Epson 1355 framebuffer support" | |
730 | depends on (FB = y) && (SUPERH || ARCH_CEIVA) | |
731 | select FB_CFB_FILLRECT | |
732 | select FB_CFB_COPYAREA | |
733 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
734 | help |
735 | Build in support for the SED1355 Epson Research Embedded RAMDAC | |
736 | LCD/CRT Controller (since redesignated as the S1D13505) as a | |
737 | framebuffer. Product specs at | |
738 | <http://www.erd.epson.com/vdc/html/products.htm>. | |
739 | ||
ecc41d5e RD |
740 | config FB_S1D13XXX |
741 | tristate "Epson S1D13XXX framebuffer support" | |
742 | depends on FB | |
743 | select FB_CFB_FILLRECT | |
744 | select FB_CFB_COPYAREA | |
745 | select FB_CFB_IMAGEBLIT | |
ecc41d5e RD |
746 | help |
747 | Support for S1D13XXX framebuffer device family (currently only | |
748 | working with S1D13806). Product specs at | |
749 | <http://www.erd.epson.com/vdc/html/legacy_13xxx.htm> | |
750 | ||
1da177e4 LT |
751 | config FB_NVIDIA |
752 | tristate "nVidia Framebuffer Support" | |
753 | depends on FB && PCI | |
e0e34ef7 | 754 | select FB_BACKLIGHT if FB_NVIDIA_BACKLIGHT |
1da177e4 LT |
755 | select FB_MODE_HELPERS |
756 | select FB_CFB_FILLRECT | |
757 | select FB_CFB_COPYAREA | |
758 | select FB_CFB_IMAGEBLIT | |
1c667682 | 759 | select BITREVERSE |
b2f594fd | 760 | select VGASTATE |
1da177e4 LT |
761 | help |
762 | This driver supports graphics boards with the nVidia chips, TNT | |
763 | and newer. For very old chipsets, such as the RIVA128, then use | |
764 | the rivafb. | |
765 | Say Y if you have such a graphics board. | |
766 | ||
767 | To compile this driver as a module, choose M here: the | |
768 | module will be called nvidiafb. | |
769 | ||
770 | config FB_NVIDIA_I2C | |
771 | bool "Enable DDC Support" | |
85f1503a | 772 | depends on FB_NVIDIA |
166f60dd | 773 | select FB_DDC |
1da177e4 LT |
774 | help |
775 | This enables I2C support for nVidia Chipsets. This is used | |
776 | only for getting EDID information from the attached display | |
777 | allowing for robust video mode handling and switching. | |
778 | ||
779 | Because fbdev-2.6 requires that drivers must be able to | |
780 | independently validate video mode parameters, you should say Y | |
781 | here. | |
782 | ||
5474c120 MH |
783 | config FB_NVIDIA_BACKLIGHT |
784 | bool "Support for backlight control" | |
e0e34ef7 | 785 | depends on FB_NVIDIA |
5474c120 MH |
786 | default y |
787 | help | |
788 | Say Y here if you want to control the backlight of your display. | |
789 | ||
1da177e4 LT |
790 | config FB_RIVA |
791 | tristate "nVidia Riva support" | |
792 | depends on FB && PCI | |
e0e34ef7 | 793 | select FB_BACKLIGHT if FB_RIVA_BACKLIGHT |
1da177e4 LT |
794 | select FB_MODE_HELPERS |
795 | select FB_CFB_FILLRECT | |
796 | select FB_CFB_COPYAREA | |
797 | select FB_CFB_IMAGEBLIT | |
1c667682 | 798 | select BITREVERSE |
b2f594fd | 799 | select VGASTATE |
1da177e4 LT |
800 | help |
801 | This driver supports graphics boards with the nVidia Riva/Geforce | |
802 | chips. | |
803 | Say Y if you have such a graphics board. | |
804 | ||
805 | To compile this driver as a module, choose M here: the | |
806 | module will be called rivafb. | |
807 | ||
808 | config FB_RIVA_I2C | |
809 | bool "Enable DDC Support" | |
810 | depends on FB_RIVA | |
166f60dd | 811 | select FB_DDC |
1da177e4 LT |
812 | help |
813 | This enables I2C support for nVidia Chipsets. This is used | |
814 | only for getting EDID information from the attached display | |
815 | allowing for robust video mode handling and switching. | |
816 | ||
817 | Because fbdev-2.6 requires that drivers must be able to | |
818 | independently validate video mode parameters, you should say Y | |
819 | here. | |
820 | ||
821 | config FB_RIVA_DEBUG | |
822 | bool "Lots of debug output from Riva(nVidia) driver" | |
823 | depends on FB_RIVA | |
824 | default n | |
825 | help | |
826 | Say Y here if you want the Riva driver to output all sorts | |
09509603 | 827 | of debugging information to provide to the maintainer when |
1da177e4 LT |
828 | something goes wrong. |
829 | ||
5474c120 MH |
830 | config FB_RIVA_BACKLIGHT |
831 | bool "Support for backlight control" | |
e0e34ef7 | 832 | depends on FB_RIVA |
5474c120 MH |
833 | default y |
834 | help | |
835 | Say Y here if you want to control the backlight of your display. | |
836 | ||
1da177e4 LT |
837 | config FB_I810 |
838 | tristate "Intel 810/815 support (EXPERIMENTAL)" | |
0d078f6f | 839 | depends on FB && EXPERIMENTAL && PCI && X86_32 |
1da177e4 LT |
840 | select AGP |
841 | select AGP_INTEL | |
842 | select FB_MODE_HELPERS | |
843 | select FB_CFB_FILLRECT | |
844 | select FB_CFB_COPYAREA | |
845 | select FB_CFB_IMAGEBLIT | |
b2f594fd | 846 | select VGASTATE |
1da177e4 LT |
847 | help |
848 | This driver supports the on-board graphics built in to the Intel 810 | |
849 | and 815 chipsets. Say Y if you have and plan to use such a board. | |
850 | ||
851 | To compile this driver as a module, choose M here: the | |
852 | module will be called i810fb. | |
853 | ||
854 | For more information, please read | |
855 | <file:Documentation/fb/intel810.txt> | |
856 | ||
857 | config FB_I810_GTF | |
858 | bool "use VESA Generalized Timing Formula" | |
859 | depends on FB_I810 | |
860 | help | |
861 | If you say Y, then the VESA standard, Generalized Timing Formula | |
862 | or GTF, will be used to calculate the required video timing values | |
863 | per video mode. Since the GTF allows nondiscrete timings | |
864 | (nondiscrete being a range of values as opposed to discrete being a | |
865 | set of values), you'll be able to use any combination of horizontal | |
866 | and vertical resolutions, and vertical refresh rates without having | |
867 | to specify your own timing parameters. This is especially useful | |
868 | to maximize the performance of an aging display, or if you just | |
869 | have a display with nonstandard dimensions. A VESA compliant | |
870 | monitor is recommended, but can still work with non-compliant ones. | |
871 | If you need or want this, then select this option. The timings may | |
872 | not be compliant with Intel's recommended values. Use at your own | |
873 | risk. | |
874 | ||
875 | If you say N, the driver will revert to discrete video timings | |
876 | using a set recommended by Intel in their documentation. | |
877 | ||
878 | If unsure, say N. | |
879 | ||
74f6ae84 AD |
880 | config FB_I810_I2C |
881 | bool "Enable DDC Support" | |
db84502b | 882 | depends on FB_I810 && FB_I810_GTF |
e80987f8 | 883 | select FB_DDC |
74f6ae84 AD |
884 | help |
885 | ||
dbe7e429 AH |
886 | config FB_LE80578 |
887 | tristate "Intel LE80578 (Vermilion) support" | |
888 | depends on FB && PCI && X86 | |
889 | select FB_MODE_HELPERS | |
890 | select FB_CFB_FILLRECT | |
891 | select FB_CFB_COPYAREA | |
892 | select FB_CFB_IMAGEBLIT | |
893 | help | |
894 | This driver supports the LE80578 (Vermilion Range) chipset | |
895 | ||
896 | config FB_CARILLO_RANCH | |
897 | tristate "Intel Carillo Ranch support" | |
898 | depends on FB_LE80578 && FB && PCI && X86 | |
899 | help | |
900 | This driver supports the LE80578 (Carillo Ranch) board | |
901 | ||
1da177e4 | 902 | config FB_INTEL |
d463d34e | 903 | tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G support (EXPERIMENTAL)" |
0c187add | 904 | depends on FB && EXPERIMENTAL && PCI && X86 |
1da177e4 LT |
905 | select AGP |
906 | select AGP_INTEL | |
907 | select FB_MODE_HELPERS | |
908 | select FB_CFB_FILLRECT | |
909 | select FB_CFB_COPYAREA | |
910 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
911 | help |
912 | This driver supports the on-board graphics built in to the Intel | |
d463d34e | 913 | 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets. |
1da177e4 LT |
914 | Say Y if you have and plan to use such a board. |
915 | ||
1f6e8449 DM |
916 | If you say Y here and want DDC/I2C support you must first say Y to |
917 | "I2C support" and "I2C bit-banging support" in the character devices | |
918 | section. | |
919 | ||
920 | If you say M here then "I2C support" and "I2C bit-banging support" | |
921 | can be build either as modules or built-in. | |
922 | ||
923 | To compile this driver as a module, choose M here: the | |
1da177e4 LT |
924 | module will be called intelfb. |
925 | ||
d463d34e CM |
926 | For more information, please read <file:Documentation/fb/intelfb.txt> |
927 | ||
1da177e4 | 928 | config FB_INTEL_DEBUG |
1f6e8449 | 929 | bool "Intel driver Debug Messages" |
1da177e4 LT |
930 | depends on FB_INTEL |
931 | ---help--- | |
932 | Say Y here if you want the Intel driver to output all sorts | |
09509603 | 933 | of debugging information to provide to the maintainer when |
1da177e4 LT |
934 | something goes wrong. |
935 | ||
1f6e8449 DM |
936 | config FB_INTEL_I2C |
937 | bool "DDC/I2C for Intel framebuffer support" | |
938 | depends on FB_INTEL | |
166f60dd | 939 | select FB_DDC |
1f6e8449 DM |
940 | default y |
941 | help | |
942 | Say Y here if you want DDC/I2C support for your on-board Intel graphics. | |
943 | ||
1da177e4 LT |
944 | config FB_MATROX |
945 | tristate "Matrox acceleration" | |
946 | depends on FB && PCI | |
947 | select FB_CFB_FILLRECT | |
948 | select FB_CFB_COPYAREA | |
949 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
950 | select FB_TILEBLITTING |
951 | select FB_MACMODES if PPC_PMAC | |
952 | ---help--- | |
953 | Say Y here if you have a Matrox Millennium, Matrox Millennium II, | |
954 | Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox | |
955 | Mystique G200, Matrox Millennium G200, Matrox Marvel G200 video, | |
956 | Matrox G400, G450 or G550 card in your box. | |
957 | ||
958 | To compile this driver as a module, choose M here: the | |
959 | module will be called matroxfb. | |
960 | ||
961 | You can pass several parameters to the driver at boot time or at | |
962 | module load time. The parameters look like "video=matrox:XXX", and | |
963 | are described in <file:Documentation/fb/matroxfb.txt>. | |
964 | ||
965 | config FB_MATROX_MILLENIUM | |
966 | bool "Millennium I/II support" | |
967 | depends on FB_MATROX | |
968 | help | |
969 | Say Y here if you have a Matrox Millennium or Matrox Millennium II | |
970 | video card. If you select "Advanced lowlevel driver options" below, | |
971 | you should check 4 bpp packed pixel, 8 bpp packed pixel, 16 bpp | |
972 | packed pixel, 24 bpp packed pixel and 32 bpp packed pixel. You can | |
973 | also use font widths different from 8. | |
974 | ||
975 | config FB_MATROX_MYSTIQUE | |
976 | bool "Mystique support" | |
977 | depends on FB_MATROX | |
978 | help | |
979 | Say Y here if you have a Matrox Mystique or Matrox Mystique 220 | |
980 | video card. If you select "Advanced lowlevel driver options" below, | |
981 | you should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp | |
982 | packed pixel and 32 bpp packed pixel. You can also use font widths | |
983 | different from 8. | |
984 | ||
985 | config FB_MATROX_G | |
986 | bool "G100/G200/G400/G450/G550 support" | |
987 | depends on FB_MATROX | |
988 | ---help--- | |
989 | Say Y here if you have a Matrox G100, G200, G400, G450 or G550 based | |
990 | video card. If you select "Advanced lowlevel driver options", you | |
991 | should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp packed | |
992 | pixel and 32 bpp packed pixel. You can also use font widths | |
993 | different from 8. | |
994 | ||
995 | If you need support for G400 secondary head, you must first say Y to | |
996 | "I2C support" in the character devices section, and then to | |
997 | "Matrox I2C support" and "G400 second head support" here in the | |
998 | framebuffer section. G450/G550 secondary head and digital output | |
999 | are supported without additional modules. | |
1000 | ||
1001 | The driver starts in monitor mode. You must use the matroxset tool | |
1002 | (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to | |
1003 | swap primary and secondary head outputs, or to change output mode. | |
1004 | Secondary head driver always start in 640x480 resolution and you | |
1005 | must use fbset to change it. | |
1006 | ||
1007 | Do not forget that second head supports only 16 and 32 bpp | |
1008 | packed pixels, so it is a good idea to compile them into the kernel | |
1009 | too. You can use only some font widths, as the driver uses generic | |
1010 | painting procedures (the secondary head does not use acceleration | |
1011 | engine). | |
1012 | ||
1013 | G450/G550 hardware can display TV picture only from secondary CRTC, | |
1014 | and it performs no scaling, so picture must have 525 or 625 lines. | |
1015 | ||
1016 | config FB_MATROX_I2C | |
1017 | tristate "Matrox I2C support" | |
166f60dd JS |
1018 | depends on FB_MATROX |
1019 | select FB_DDC | |
1da177e4 LT |
1020 | ---help--- |
1021 | This drivers creates I2C buses which are needed for accessing the | |
1022 | DDC (I2C) bus present on all Matroxes, an I2C bus which | |
1023 | interconnects Matrox optional devices, like MGA-TVO on G200 and | |
1024 | G400, and the secondary head DDC bus, present on G400 only. | |
1025 | ||
1026 | You can say Y or M here if you want to experiment with monitor | |
1027 | detection code. You must say Y or M here if you want to use either | |
1028 | second head of G400 or MGA-TVO on G200 or G400. | |
1029 | ||
1030 | If you compile it as module, it will create a module named | |
1031 | i2c-matroxfb. | |
1032 | ||
1033 | config FB_MATROX_MAVEN | |
1034 | tristate "G400 second head support" | |
1035 | depends on FB_MATROX_G && FB_MATROX_I2C | |
1036 | ---help--- | |
1037 | WARNING !!! This support does not work with G450 !!! | |
1038 | ||
1039 | Say Y or M here if you want to use a secondary head (meaning two | |
1040 | monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary | |
1041 | head is not compatible with accelerated XFree 3.3.x SVGA servers - | |
1042 | secondary head output is blanked while you are in X. With XFree | |
1043 | 3.9.17 preview you can use both heads if you use SVGA over fbdev or | |
1044 | the fbdev driver on first head and the fbdev driver on second head. | |
1045 | ||
1046 | If you compile it as module, two modules are created, | |
1047 | matroxfb_crtc2 and matroxfb_maven. Matroxfb_maven is needed for | |
1048 | both G200 and G400, matroxfb_crtc2 is needed only by G400. You must | |
1049 | also load i2c-matroxfb to get it to run. | |
1050 | ||
1051 | The driver starts in monitor mode and you must use the matroxset | |
1052 | tool (available at | |
1053 | <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to | |
1054 | PAL or NTSC or to swap primary and secondary head outputs. | |
1055 | Secondary head driver also always start in 640x480 resolution, you | |
1056 | must use fbset to change it. | |
1057 | ||
1058 | Also do not forget that second head supports only 16 and 32 bpp | |
1059 | packed pixels, so it is a good idea to compile them into the kernel | |
1060 | too. You can use only some font widths, as the driver uses generic | |
1061 | painting procedures (the secondary head does not use acceleration | |
1062 | engine). | |
1063 | ||
1064 | config FB_MATROX_MULTIHEAD | |
1065 | bool "Multihead support" | |
1066 | depends on FB_MATROX | |
1067 | ---help--- | |
1068 | Say Y here if you have more than one (supported) Matrox device in | |
1069 | your computer and you want to use all of them for different monitors | |
1070 | ("multihead"). If you have only one device, you should say N because | |
1071 | the driver compiled with Y is larger and a bit slower, especially on | |
1072 | ia32 (ix86). | |
1073 | ||
1074 | If you said M to "Matrox unified accelerated driver" and N here, you | |
1075 | will still be able to use several Matrox devices simultaneously: | |
1076 | insert several instances of the module matroxfb into the kernel | |
1077 | with insmod, supplying the parameter "dev=N" where N is 0, 1, etc. | |
1078 | for the different Matrox devices. This method is slightly faster but | |
1079 | uses 40 KB of kernel memory per Matrox card. | |
1080 | ||
1081 | There is no need for enabling 'Matrox multihead support' if you have | |
1082 | only one Matrox card in the box. | |
1083 | ||
1da177e4 LT |
1084 | config FB_RADEON |
1085 | tristate "ATI Radeon display support" | |
1086 | depends on FB && PCI | |
e0e34ef7 | 1087 | select FB_BACKLIGHT if FB_RADEON_BACKLIGHT |
1da177e4 LT |
1088 | select FB_MODE_HELPERS |
1089 | select FB_CFB_FILLRECT | |
1090 | select FB_CFB_COPYAREA | |
1091 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1092 | select FB_MACMODES if PPC_OF |
1093 | help | |
1094 | Choose this option if you want to use an ATI Radeon graphics card as | |
1095 | a framebuffer device. There are both PCI and AGP versions. You | |
1096 | don't need to choose this to run the Radeon in plain VGA mode. | |
1097 | ||
1098 | If you say Y here and want DDC/I2C support you must first say Y to | |
1099 | "I2C support" and "I2C bit-banging support" in the character devices | |
1100 | section. | |
1101 | ||
1102 | If you say M here then "I2C support" and "I2C bit-banging support" | |
1103 | can be build either as modules or built-in. | |
1104 | ||
1105 | There is a product page at | |
f510a3c3 | 1106 | http://apps.ati.com/ATIcompare/ |
5474c120 | 1107 | |
1da177e4 LT |
1108 | config FB_RADEON_I2C |
1109 | bool "DDC/I2C for ATI Radeon support" | |
1110 | depends on FB_RADEON | |
166f60dd | 1111 | select FB_DDC |
1da177e4 LT |
1112 | default y |
1113 | help | |
1114 | Say Y here if you want DDC/I2C support for your Radeon board. | |
1115 | ||
5474c120 MH |
1116 | config FB_RADEON_BACKLIGHT |
1117 | bool "Support for backlight control" | |
e0e34ef7 | 1118 | depends on FB_RADEON |
5474c120 MH |
1119 | default y |
1120 | help | |
1121 | Say Y here if you want to control the backlight of your display. | |
1122 | ||
1da177e4 LT |
1123 | config FB_RADEON_DEBUG |
1124 | bool "Lots of debug output from Radeon driver" | |
1125 | depends on FB_RADEON | |
1126 | default n | |
1127 | help | |
1128 | Say Y here if you want the Radeon driver to output all sorts | |
09509603 | 1129 | of debugging information to provide to the maintainer when |
1da177e4 LT |
1130 | something goes wrong. |
1131 | ||
1132 | config FB_ATY128 | |
1133 | tristate "ATI Rage128 display support" | |
1134 | depends on FB && PCI | |
1135 | select FB_CFB_FILLRECT | |
1136 | select FB_CFB_COPYAREA | |
1137 | select FB_CFB_IMAGEBLIT | |
e0e34ef7 | 1138 | select FB_BACKLIGHT if FB_ATY128_BACKLIGHT |
1da177e4 LT |
1139 | select FB_MACMODES if PPC_PMAC |
1140 | help | |
1141 | This driver supports graphics boards with the ATI Rage128 chips. | |
1142 | Say Y if you have such a graphics board and read | |
1143 | <file:Documentation/fb/aty128fb.txt>. | |
1144 | ||
1145 | To compile this driver as a module, choose M here: the | |
1146 | module will be called aty128fb. | |
1147 | ||
5474c120 MH |
1148 | config FB_ATY128_BACKLIGHT |
1149 | bool "Support for backlight control" | |
e0e34ef7 | 1150 | depends on FB_ATY128 |
5474c120 MH |
1151 | default y |
1152 | help | |
1153 | Say Y here if you want to control the backlight of your display. | |
1154 | ||
1da177e4 LT |
1155 | config FB_ATY |
1156 | tristate "ATI Mach64 display support" if PCI || ATARI | |
f2e782ef | 1157 | depends on FB && !SPARC32 |
1da177e4 LT |
1158 | select FB_CFB_FILLRECT |
1159 | select FB_CFB_COPYAREA | |
1160 | select FB_CFB_IMAGEBLIT | |
e0e34ef7 | 1161 | select FB_BACKLIGHT if FB_ATY_BACKLIGHT |
1da177e4 LT |
1162 | select FB_MACMODES if PPC |
1163 | help | |
1164 | This driver supports graphics boards with the ATI Mach64 chips. | |
1165 | Say Y if you have such a graphics board. | |
1166 | ||
1167 | To compile this driver as a module, choose M here: the | |
1168 | module will be called atyfb. | |
1169 | ||
1170 | config FB_ATY_CT | |
1171 | bool "Mach64 CT/VT/GT/LT (incl. 3D RAGE) support" | |
1172 | depends on PCI && FB_ATY | |
1173 | default y if SPARC64 && FB_PCI | |
1174 | help | |
1175 | Say Y here to support use of ATI's 64-bit Rage boards (or other | |
1176 | boards based on the Mach64 CT, VT, GT, and LT chipsets) as a | |
1177 | framebuffer device. The ATI product support page for these boards | |
1178 | is at <http://support.ati.com/products/pc/mach64/>. | |
1179 | ||
1180 | config FB_ATY_GENERIC_LCD | |
1181 | bool "Mach64 generic LCD support (EXPERIMENTAL)" | |
1182 | depends on FB_ATY_CT | |
1183 | help | |
1184 | Say Y if you have a laptop with an ATI Rage LT PRO, Rage Mobility, | |
1185 | Rage XC, or Rage XL chipset. | |
1186 | ||
1da177e4 LT |
1187 | config FB_ATY_GX |
1188 | bool "Mach64 GX support" if PCI | |
1189 | depends on FB_ATY | |
1190 | default y if ATARI | |
1191 | help | |
1192 | Say Y here to support use of the ATI Mach64 Graphics Expression | |
1193 | board (or other boards based on the Mach64 GX chipset) as a | |
1194 | framebuffer device. The ATI product support page for these boards | |
1195 | is at | |
1196 | <http://support.ati.com/products/pc/mach64/graphics_xpression.html>. | |
1197 | ||
5474c120 MH |
1198 | config FB_ATY_BACKLIGHT |
1199 | bool "Support for backlight control" | |
e0e34ef7 | 1200 | depends on FB_ATY |
5474c120 MH |
1201 | default y |
1202 | help | |
1203 | Say Y here if you want to control the backlight of your display. | |
1204 | ||
a268422d OZ |
1205 | config FB_S3 |
1206 | tristate "S3 Trio/Virge support" | |
1207 | depends on FB && PCI | |
1208 | select FB_CFB_FILLRECT | |
1209 | select FB_CFB_COPYAREA | |
1210 | select FB_CFB_IMAGEBLIT | |
1211 | select FB_TILEBLITTING | |
1212 | select FB_SVGALIB | |
b2f594fd | 1213 | select VGASTATE |
8db51668 | 1214 | select FONT_8x16 if FRAMEBUFFER_CONSOLE |
a268422d OZ |
1215 | ---help--- |
1216 | Driver for graphics boards with S3 Trio / S3 Virge chip. | |
1217 | ||
1da177e4 LT |
1218 | config FB_SAVAGE |
1219 | tristate "S3 Savage support" | |
1220 | depends on FB && PCI && EXPERIMENTAL | |
1da177e4 LT |
1221 | select FB_MODE_HELPERS |
1222 | select FB_CFB_FILLRECT | |
1223 | select FB_CFB_COPYAREA | |
1224 | select FB_CFB_IMAGEBLIT | |
b2f594fd | 1225 | select VGASTATE |
1da177e4 LT |
1226 | help |
1227 | This driver supports notebooks and computers with S3 Savage PCI/AGP | |
1228 | chips. | |
1229 | ||
1230 | Say Y if you have such a graphics card. | |
1231 | ||
1232 | To compile this driver as a module, choose M here; the module | |
1233 | will be called savagefb. | |
1234 | ||
1235 | config FB_SAVAGE_I2C | |
1236 | bool "Enable DDC2 Support" | |
1237 | depends on FB_SAVAGE | |
166f60dd | 1238 | select FB_DDC |
1da177e4 LT |
1239 | help |
1240 | This enables I2C support for S3 Savage Chipsets. This is used | |
1241 | only for getting EDID information from the attached display | |
1242 | allowing for robust video mode handling and switching. | |
1243 | ||
1244 | Because fbdev-2.6 requires that drivers must be able to | |
1245 | independently validate video mode parameters, you should say Y | |
1246 | here. | |
1247 | ||
1248 | config FB_SAVAGE_ACCEL | |
1249 | bool "Enable Console Acceleration" | |
1250 | depends on FB_SAVAGE | |
1251 | default n | |
1252 | help | |
1253 | This option will compile in console acceleration support. If | |
1254 | the resulting framebuffer console has bothersome glitches, then | |
1255 | choose N here. | |
1256 | ||
1257 | config FB_SIS | |
544393fe | 1258 | tristate "SiS/XGI display support" |
1da177e4 LT |
1259 | depends on FB && PCI |
1260 | select FB_CFB_FILLRECT | |
1261 | select FB_CFB_COPYAREA | |
1262 | select FB_CFB_IMAGEBLIT | |
1da177e4 | 1263 | help |
544393fe TW |
1264 | This is the frame buffer device driver for the SiS 300, 315, 330 |
1265 | and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets. | |
1266 | Specs available at <http://www.sis.com> and <http://www.xgitech.com>. | |
1da177e4 LT |
1267 | |
1268 | To compile this driver as a module, choose M here; the module | |
1269 | will be called sisfb. | |
1270 | ||
1271 | config FB_SIS_300 | |
1272 | bool "SiS 300 series support" | |
1273 | depends on FB_SIS | |
1274 | help | |
1275 | Say Y here to support use of the SiS 300/305, 540, 630 and 730. | |
1276 | ||
1277 | config FB_SIS_315 | |
544393fe | 1278 | bool "SiS 315/330/340 series and XGI support" |
1da177e4 LT |
1279 | depends on FB_SIS |
1280 | help | |
544393fe TW |
1281 | Say Y here to support use of the SiS 315, 330 and 340 series |
1282 | (315/H/PRO, 55x, 650, 651, 740, 330, 661, 741, 760, 761) as well | |
1283 | as XGI V3XT, V5, V8 and Z7. | |
1da177e4 LT |
1284 | |
1285 | config FB_NEOMAGIC | |
1286 | tristate "NeoMagic display support" | |
1287 | depends on FB && PCI | |
1288 | select FB_MODE_HELPERS | |
1289 | select FB_CFB_FILLRECT | |
1290 | select FB_CFB_COPYAREA | |
1291 | select FB_CFB_IMAGEBLIT | |
b2f594fd | 1292 | select VGASTATE |
1da177e4 LT |
1293 | help |
1294 | This driver supports notebooks with NeoMagic PCI chips. | |
1295 | Say Y if you have such a graphics card. | |
1296 | ||
1297 | To compile this driver as a module, choose M here: the | |
1298 | module will be called neofb. | |
1299 | ||
1300 | config FB_KYRO | |
1301 | tristate "IMG Kyro support" | |
1302 | depends on FB && PCI | |
1303 | select FB_CFB_FILLRECT | |
1304 | select FB_CFB_COPYAREA | |
1305 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1306 | help |
1307 | Say Y here if you have a STG4000 / Kyro / PowerVR 3 based | |
1308 | graphics board. | |
1309 | ||
1310 | To compile this driver as a module, choose M here: the | |
1311 | module will be called kyrofb. | |
1312 | ||
1313 | config FB_3DFX | |
1314 | tristate "3Dfx Banshee/Voodoo3 display support" | |
1315 | depends on FB && PCI | |
1316 | select FB_CFB_IMAGEBLIT | |
1317 | select FB_CFB_FILLRECT | |
1318 | select FB_CFB_COPYAREA | |
1da177e4 LT |
1319 | help |
1320 | This driver supports graphics boards with the 3Dfx Banshee/Voodoo3 | |
1321 | chips. Say Y if you have such a graphics board. | |
1322 | ||
1323 | To compile this driver as a module, choose M here: the | |
1324 | module will be called tdfxfb. | |
1325 | ||
1326 | config FB_3DFX_ACCEL | |
1327 | bool "3Dfx Banshee/Voodoo3 Acceleration functions (EXPERIMENTAL)" | |
1328 | depends on FB_3DFX && EXPERIMENTAL | |
1329 | ---help--- | |
1330 | This will compile the 3Dfx Banshee/Voodoo3 frame buffer device | |
1331 | with acceleration functions. | |
1332 | ||
1333 | ||
1334 | config FB_VOODOO1 | |
1335 | tristate "3Dfx Voodoo Graphics (sst1) support" | |
1336 | depends on FB && PCI | |
1337 | select FB_CFB_FILLRECT | |
1338 | select FB_CFB_COPYAREA | |
1339 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1340 | ---help--- |
1341 | Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or | |
1342 | Voodoo2 (cvg) based graphics card. | |
1343 | ||
1344 | To compile this driver as a module, choose M here: the | |
1345 | module will be called sstfb. | |
1346 | ||
1347 | WARNING: Do not use any application that uses the 3D engine | |
1348 | (namely glide) while using this driver. | |
1349 | Please read the <file:Documentation/fb/README-sstfb.txt> for supported | |
1350 | options and other important info support. | |
1351 | ||
558b7bd8 OZ |
1352 | config FB_VT8623 |
1353 | tristate "VIA VT8623 support" | |
1354 | depends on FB && PCI | |
1355 | select FB_CFB_FILLRECT | |
1356 | select FB_CFB_COPYAREA | |
1357 | select FB_CFB_IMAGEBLIT | |
1358 | select FB_TILEBLITTING | |
1359 | select FB_SVGALIB | |
1360 | select VGASTATE | |
1361 | select FONT_8x16 if FRAMEBUFFER_CONSOLE | |
1362 | ---help--- | |
1363 | Driver for CastleRock integrated graphics core in the | |
1364 | VIA VT8623 [Apollo CLE266] chipset. | |
1365 | ||
9fa68eae KP |
1366 | config FB_CYBLA |
1367 | tristate "Cyberblade/i1 support" | |
44637a12 | 1368 | depends on FB && PCI && X86_32 && !64BIT |
9fa68eae | 1369 | select FB_CFB_IMAGEBLIT |
9fa68eae KP |
1370 | select VIDEO_SELECT |
1371 | ---help--- | |
1372 | This driver is supposed to support the Trident Cyberblade/i1 | |
1373 | graphics core integrated in the VIA VT8601A North Bridge, | |
1374 | also known as VIA Apollo PLE133. | |
1375 | ||
1376 | Status: | |
1377 | - Developed, tested and working on EPIA 5000 and EPIA 800. | |
1378 | - Does work reliable on all systems with CRT/LCD connected to | |
1379 | normal VGA ports. | |
1380 | - Should work on systems that do use the internal LCD port, but | |
1381 | this is absolutely not tested. | |
1382 | ||
1383 | Character imageblit, copyarea and rectangle fill are hw accelerated, | |
1384 | ypan scrolling is used by default. | |
1385 | ||
1386 | Please do read <file:Documentation/fb/cyblafb/*>. | |
1387 | ||
1388 | To compile this driver as a module, choose M here: the | |
1389 | module will be called cyblafb. | |
1390 | ||
1da177e4 LT |
1391 | config FB_TRIDENT |
1392 | tristate "Trident support" | |
1393 | depends on FB && PCI | |
1394 | select FB_CFB_FILLRECT | |
1395 | select FB_CFB_COPYAREA | |
1396 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1397 | ---help--- |
1398 | This driver is supposed to support graphics boards with the | |
1399 | Trident CyberXXXX/Image/CyberBlade chips mostly found in laptops | |
1400 | but also on some motherboards. For more information, read | |
1401 | <file:Documentation/fb/tridentfb.txt> | |
1402 | ||
9fa68eae KP |
1403 | Cyberblade/i1 support will be removed soon, use the cyblafb driver |
1404 | instead. | |
1405 | ||
1da177e4 LT |
1406 | Say Y if you have such a graphics board. |
1407 | ||
9fa68eae | 1408 | |
1da177e4 LT |
1409 | To compile this driver as a module, choose M here: the |
1410 | module will be called tridentfb. | |
1411 | ||
1412 | config FB_TRIDENT_ACCEL | |
1413 | bool "Trident Acceleration functions (EXPERIMENTAL)" | |
1414 | depends on FB_TRIDENT && EXPERIMENTAL | |
1415 | ---help--- | |
1416 | This will compile the Trident frame buffer device with | |
1417 | acceleration functions. | |
1418 | ||
681e1473 OZ |
1419 | config FB_ARK |
1420 | tristate "ARK 2000PV support" | |
1421 | depends on FB && PCI | |
1422 | select FB_CFB_FILLRECT | |
1423 | select FB_CFB_COPYAREA | |
1424 | select FB_CFB_IMAGEBLIT | |
1425 | select FB_TILEBLITTING | |
1426 | select FB_SVGALIB | |
1427 | select VGASTATE | |
1428 | select FONT_8x16 if FRAMEBUFFER_CONSOLE | |
1429 | ---help--- | |
1430 | Driver for PCI graphics boards with ARK 2000PV chip | |
1431 | and ICS 5342 RAMDAC. | |
1432 | ||
1da177e4 LT |
1433 | config FB_PM3 |
1434 | tristate "Permedia3 support" | |
1435 | depends on FB && PCI && BROKEN | |
1436 | help | |
1437 | This is the frame buffer device driver for the 3DLabs Permedia3 | |
1438 | chipset, used in Formac ProFormance III, 3DLabs Oxygen VX1 & | |
1439 | similar boards, 3DLabs Permedia3 Create!, Appian Jeronimo 2000 | |
1440 | and maybe other boards. | |
1441 | ||
1da177e4 LT |
1442 | config FB_AU1100 |
1443 | bool "Au1100 LCD Driver" | |
1444 | depends on (FB = y) && EXPERIMENTAL && PCI && MIPS && MIPS_PB1100=y | |
1445 | ||
f95ec3c6 RB |
1446 | config FB_AU1200 |
1447 | bool "Au1200 LCD Driver" | |
833f8062 | 1448 | depends on (FB = y) && MIPS && SOC_AU1200 |
f95ec3c6 RB |
1449 | select FB_CFB_FILLRECT |
1450 | select FB_CFB_COPYAREA | |
1451 | select FB_CFB_IMAGEBLIT | |
1452 | help | |
1453 | This is the framebuffer driver for the AMD Au1200 SOC. It can drive | |
1454 | various panels and CRTs by passing in kernel cmd line option | |
1455 | au1200fb:panel=<name>. | |
1456 | ||
1da177e4 LT |
1457 | source "drivers/video/geode/Kconfig" |
1458 | ||
1da177e4 LT |
1459 | config FB_FFB |
1460 | bool "Creator/Creator3D/Elite3D support" | |
1461 | depends on FB_SBUS && SPARC64 | |
1462 | select FB_CFB_COPYAREA | |
1463 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1464 | help |
1465 | This is the frame buffer device driver for the Creator, Creator3D, | |
1466 | and Elite3D graphics boards. | |
1467 | ||
1468 | config FB_TCX | |
1469 | bool "TCX (SS4/SS5 only) support" | |
1470 | depends on FB_SBUS | |
1471 | select FB_CFB_FILLRECT | |
1472 | select FB_CFB_COPYAREA | |
1473 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1474 | help |
1475 | This is the frame buffer device driver for the TCX 24/8bit frame | |
1476 | buffer. | |
1477 | ||
1478 | config FB_CG14 | |
1479 | bool "CGfourteen (SX) support" | |
1480 | depends on FB_SBUS | |
1481 | select FB_CFB_FILLRECT | |
1482 | select FB_CFB_COPYAREA | |
1483 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1484 | help |
1485 | This is the frame buffer device driver for the CGfourteen frame | |
1486 | buffer on Desktop SPARCsystems with the SX graphics option. | |
1487 | ||
1488 | config FB_P9100 | |
1489 | bool "P9100 (Sparcbook 3 only) support" | |
1490 | depends on FB_SBUS | |
1491 | select FB_CFB_FILLRECT | |
1492 | select FB_CFB_COPYAREA | |
1493 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1494 | help |
1495 | This is the frame buffer device driver for the P9100 card | |
1496 | supported on Sparcbook 3 machines. | |
1497 | ||
1498 | config FB_LEO | |
1499 | bool "Leo (ZX) support" | |
1500 | depends on FB_SBUS | |
1501 | select FB_CFB_FILLRECT | |
1502 | select FB_CFB_COPYAREA | |
1503 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1504 | help |
1505 | This is the frame buffer device driver for the SBUS-based Sun ZX | |
1506 | (leo) frame buffer cards. | |
1507 | ||
453e93b3 DM |
1508 | config FB_XVR500 |
1509 | bool "Sun XVR-500 3DLABS Wildcat support" | |
1510 | depends on FB && PCI && SPARC64 | |
1511 | select FB_CFB_FILLRECT | |
1512 | select FB_CFB_COPYAREA | |
1513 | select FB_CFB_IMAGEBLIT | |
1514 | help | |
1515 | This is the framebuffer device for the Sun XVR-500 and similar | |
1516 | graphics cards based upon the 3DLABS Wildcat chipset. The driver | |
1517 | only works on sparc64 systems where the system firwmare has | |
1518 | mostly initialized the card already. It is treated as a | |
1519 | completely dumb framebuffer device. | |
1520 | ||
71227521 DM |
1521 | config FB_XVR2500 |
1522 | bool "Sun XVR-2500 3DLABS Wildcat support" | |
1523 | depends on FB && PCI && SPARC64 | |
1524 | select FB_CFB_FILLRECT | |
1525 | select FB_CFB_COPYAREA | |
1526 | select FB_CFB_IMAGEBLIT | |
1527 | help | |
1528 | This is the framebuffer device for the Sun XVR-2500 and similar | |
1529 | graphics cards based upon the 3DLABS Wildcat chipset. The driver | |
1530 | only works on sparc64 systems where the system firwmare has | |
1531 | mostly initialized the card already. It is treated as a | |
1532 | completely dumb framebuffer device. | |
1533 | ||
1da177e4 LT |
1534 | config FB_PCI |
1535 | bool "PCI framebuffers" | |
0b57ee9e | 1536 | depends on (FB = y) && PCI && SPARC |
1da177e4 LT |
1537 | |
1538 | config FB_IGA | |
1539 | bool "IGA 168x display support" | |
1540 | depends on SPARC32 && FB_PCI | |
1541 | select FB_CFB_FILLRECT | |
1542 | select FB_CFB_COPYAREA | |
1543 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1544 | help |
1545 | This is the framebuffer device for the INTERGRAPHICS 1680 and | |
1546 | successor frame buffer cards. | |
1547 | ||
1548 | config FB_HIT | |
1549 | tristate "HD64461 Frame Buffer support" | |
1550 | depends on FB && HD64461 | |
1551 | select FB_CFB_FILLRECT | |
1552 | select FB_CFB_COPYAREA | |
1553 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1554 | help |
1555 | This is the frame buffer device driver for the Hitachi HD64461 LCD | |
1556 | frame buffer card. | |
1557 | ||
1558 | config FB_PMAG_AA | |
1559 | bool "PMAG-AA TURBOchannel framebuffer support" | |
a9350003 | 1560 | depends on (FB = y) && TC |
1da177e4 LT |
1561 | select FB_CFB_FILLRECT |
1562 | select FB_CFB_COPYAREA | |
1563 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1564 | help |
1565 | Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1) | |
1566 | used mainly in the MIPS-based DECstation series. | |
1567 | ||
1568 | config FB_PMAG_BA | |
335dc50c MR |
1569 | tristate "PMAG-BA TURBOchannel framebuffer support" |
1570 | depends on FB && TC | |
1da177e4 LT |
1571 | select FB_CFB_FILLRECT |
1572 | select FB_CFB_COPYAREA | |
1573 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1574 | help |
1575 | Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8) | |
1576 | used mainly in the MIPS-based DECstation series. | |
1577 | ||
1578 | config FB_PMAGB_B | |
9084b005 MR |
1579 | tristate "PMAGB-B TURBOchannel framebuffer support" |
1580 | depends on TC | |
1da177e4 LT |
1581 | select FB_CFB_FILLRECT |
1582 | select FB_CFB_COPYAREA | |
1583 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1584 | help |
1585 | Support for the PMAGB-B TURBOchannel framebuffer card used mainly | |
1586 | in the MIPS-based DECstation series. The card is currently only | |
1587 | supported in 1280x1024x8 mode. | |
1588 | ||
1589 | config FB_MAXINE | |
1590 | bool "Maxine (Personal DECstation) onboard framebuffer support" | |
a9350003 | 1591 | depends on (FB = y) && MACH_DECSTATION |
1da177e4 LT |
1592 | select FB_CFB_FILLRECT |
1593 | select FB_CFB_COPYAREA | |
1594 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1595 | help |
1596 | Support for the onboard framebuffer (1024x768x8) in the Personal | |
1597 | DECstation series (Personal DECstation 5000/20, /25, /33, /50, | |
1598 | Codename "Maxine"). | |
1599 | ||
1600 | config FB_TX3912 | |
1601 | bool "TMPTX3912/PR31700 frame buffer support" | |
1602 | depends on (FB = y) && NINO | |
1603 | select FB_CFB_FILLRECT | |
1604 | select FB_CFB_COPYAREA | |
1605 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1606 | help |
1607 | The TX3912 is a Toshiba RISC processor based on the MIPS 3900 core | |
1608 | see <http://www.toshiba.com/taec/components/Generic/risc/tx3912.htm>. | |
1609 | ||
1610 | Say Y here to enable kernel support for the on-board framebuffer. | |
1611 | ||
1612 | config FB_G364 | |
b38817dd YY |
1613 | bool "G364 frame buffer support" |
1614 | depends on (FB = y) && (MIPS_MAGNUM_4000 || OLIVETTI_M700) | |
1da177e4 LT |
1615 | select FB_CFB_FILLRECT |
1616 | select FB_CFB_COPYAREA | |
1617 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1618 | help |
1619 | The G364 driver is the framebuffer used in MIPS Magnum 4000 and | |
1620 | Olivetti M700-10 systems. | |
1621 | ||
1622 | config FB_68328 | |
1623 | bool "Motorola 68328 native frame buffer support" | |
833f8062 | 1624 | depends on (FB = y) && (M68328 || M68EZ328 || M68VZ328) |
1da177e4 LT |
1625 | select FB_CFB_FILLRECT |
1626 | select FB_CFB_COPYAREA | |
1627 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1628 | help |
1629 | Say Y here if you want to support the built-in frame buffer of | |
1630 | the Motorola 68328 CPU family. | |
1631 | ||
1632 | config FB_PXA | |
1633 | tristate "PXA LCD framebuffer support" | |
1634 | depends on FB && ARCH_PXA | |
1635 | select FB_CFB_FILLRECT | |
1636 | select FB_CFB_COPYAREA | |
1637 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1638 | ---help--- |
1639 | Frame buffer driver for the built-in LCD controller in the Intel | |
1640 | PXA2x0 processor. | |
1641 | ||
1642 | This driver is also available as a module ( = code which can be | |
1643 | inserted and removed from the running kernel whenever you want). The | |
74b4f042 | 1644 | module will be called pxafb. If you want to compile it as a module, |
39f5fb30 | 1645 | say M here and read <file:Documentation/kbuild/modules.txt>. |
1da177e4 LT |
1646 | |
1647 | If unsure, say N. | |
1648 | ||
1da177e4 LT |
1649 | config FB_PXA_PARAMETERS |
1650 | bool "PXA LCD command line parameters" | |
1651 | default n | |
1652 | depends on FB_PXA | |
1653 | ---help--- | |
1654 | Enable the use of kernel command line or module parameters | |
1655 | to configure the physical properties of the LCD panel when | |
1656 | using the PXA LCD driver. | |
1657 | ||
1658 | This option allows you to override the panel parameters | |
1659 | supplied by the platform in order to support multiple | |
1660 | different models of flatpanel. If you will only be using a | |
1661 | single model of flatpanel then you can safely leave this | |
1662 | option disabled. | |
1663 | ||
1664 | <file:Documentation/fb/pxafb.txt> describes the available parameters. | |
1665 | ||
22caf042 MR |
1666 | config FB_MBX |
1667 | tristate "2700G LCD framebuffer support" | |
1668 | depends on FB && ARCH_PXA | |
1669 | select FB_CFB_FILLRECT | |
1670 | select FB_CFB_COPYAREA | |
1671 | select FB_CFB_IMAGEBLIT | |
1672 | ---help--- | |
1673 | Framebuffer driver for the Intel 2700G (Marathon) Graphics | |
1674 | Accelerator | |
1675 | ||
1676 | config FB_MBX_DEBUG | |
1677 | bool "Enable debugging info via debugfs" | |
1678 | depends on FB_MBX && DEBUG_FS | |
1679 | default n | |
1680 | ---help--- | |
1681 | Enable this if you want debugging information using the debug | |
1682 | filesystem (debugfs) | |
1683 | ||
1684 | If unsure, say N. | |
1685 | ||
ecc41d5e RD |
1686 | config FB_W100 |
1687 | tristate "W100 frame buffer support" | |
1688 | depends on FB && PXA_SHARPSL | |
1689 | select FB_CFB_FILLRECT | |
1690 | select FB_CFB_COPYAREA | |
1691 | select FB_CFB_IMAGEBLIT | |
ecc41d5e RD |
1692 | ---help--- |
1693 | Frame buffer driver for the w100 as found on the Sharp SL-Cxx series. | |
1694 | ||
1695 | This driver is also available as a module ( = code which can be | |
1696 | inserted and removed from the running kernel whenever you want). The | |
74b4f042 | 1697 | module will be called w100fb. If you want to compile it as a module, |
39f5fb30 | 1698 | say M here and read <file:Documentation/kbuild/modules.txt>. |
ecc41d5e RD |
1699 | |
1700 | If unsure, say N. | |
1da177e4 | 1701 | |
20fd5767 AP |
1702 | config FB_S3C2410 |
1703 | tristate "S3C2410 LCD framebuffer support" | |
1704 | depends on FB && ARCH_S3C2410 | |
1705 | select FB_CFB_FILLRECT | |
1706 | select FB_CFB_COPYAREA | |
1707 | select FB_CFB_IMAGEBLIT | |
20fd5767 AP |
1708 | ---help--- |
1709 | Frame buffer driver for the built-in LCD controller in the Samsung | |
1710 | S3C2410 processor. | |
1711 | ||
1712 | This driver is also available as a module ( = code which can be | |
1713 | inserted and removed from the running kernel whenever you want). The | |
1714 | module will be called s3c2410fb. If you want to compile it as a module, | |
39f5fb30 | 1715 | say M here and read <file:Documentation/kbuild/modules.txt>. |
20fd5767 AP |
1716 | |
1717 | If unsure, say N. | |
1718 | config FB_S3C2410_DEBUG | |
1719 | bool "S3C2410 lcd debug messages" | |
1720 | depends on FB_S3C2410 | |
1721 | help | |
1722 | Turn on debugging messages. Note that you can set/unset at run time | |
1723 | through sysfs | |
1724 | ||
5fc404e4 BD |
1725 | config FB_SM501 |
1726 | tristate "Silicon Motion SM501 framebuffer support" | |
1727 | depends on FB && MFD_SM501 | |
1728 | select FB_CFB_FILLRECT | |
1729 | select FB_CFB_COPYAREA | |
1730 | select FB_CFB_IMAGEBLIT | |
1731 | ---help--- | |
1732 | Frame buffer driver for the CRT and LCD controllers in the Silicon | |
1733 | Motion SM501. | |
1734 | ||
1735 | This driver is also available as a module ( = code which can be | |
1736 | inserted and removed from the running kernel whenever you want). The | |
1737 | module will be called sm501fb. If you want to compile it as a module, | |
1738 | say M here and read <file:Documentation/modules.txt>. | |
1739 | ||
1740 | If unsure, say N. | |
1741 | ||
1742 | ||
36c9366e VW |
1743 | config FB_PNX4008_DUM |
1744 | tristate "Display Update Module support on Philips PNX4008 board" | |
1745 | depends on FB && ARCH_PNX4008 | |
1746 | ---help--- | |
1747 | Say Y here to enable support for PNX4008 Display Update Module (DUM) | |
1748 | ||
1749 | config FB_PNX4008_DUM_RGB | |
1750 | tristate "RGB Framebuffer support on Philips PNX4008 board" | |
1751 | depends on FB_PNX4008_DUM | |
1752 | select FB_CFB_FILLRECT | |
1753 | select FB_CFB_COPYAREA | |
1754 | select FB_CFB_IMAGEBLIT | |
1755 | ---help--- | |
1756 | Say Y here to enable support for PNX4008 RGB Framebuffer | |
1757 | ||
a3d89983 PM |
1758 | config FB_IBM_GXT4500 |
1759 | tristate "Framebuffer support for IBM GXT4500P adaptor" | |
1760 | depends on PPC | |
1761 | select FB_CFB_FILLRECT | |
1762 | select FB_CFB_COPYAREA | |
1763 | select FB_CFB_IMAGEBLIT | |
1764 | ---help--- | |
1765 | Say Y here to enable support for the IBM GXT4500P display | |
1766 | adaptor, found on some IBM System P (pSeries) machines. | |
1767 | ||
310d8c11 GU |
1768 | config FB_PS3 |
1769 | bool "PS3 GPU framebuffer driver" | |
833f8062 | 1770 | depends on (FB = y) && PS3_PS3AV |
310d8c11 GU |
1771 | select FB_CFB_FILLRECT |
1772 | select FB_CFB_COPYAREA | |
1773 | select FB_CFB_IMAGEBLIT | |
1774 | ---help--- | |
1775 | Include support for the virtual frame buffer in the PS3 platform. | |
1776 | ||
1777 | config FB_PS3_DEFAULT_SIZE_M | |
1778 | int "PS3 default frame buffer size (in MiB)" | |
1779 | depends on FB_PS3 | |
1780 | default 18 | |
1781 | ---help--- | |
1782 | This is the default size (in MiB) of the virtual frame buffer in | |
1783 | the PS3. | |
1784 | The default value can be overridden on the kernel command line | |
1785 | using the "ps3fb" option (e.g. "ps3fb=9M"); | |
1786 | ||
147394c8 AK |
1787 | config FB_XILINX |
1788 | tristate "Xilinx frame buffer support" | |
1789 | depends on FB && XILINX_VIRTEX | |
1790 | select FB_CFB_FILLRECT | |
1791 | select FB_CFB_COPYAREA | |
1792 | select FB_CFB_IMAGEBLIT | |
1793 | ---help--- | |
1794 | Include support for the Xilinx ML300/ML403 reference design | |
1795 | framebuffer. ML300 carries a 640*480 LCD display on the board, | |
1796 | ML403 uses a standard DB15 VGA connector. | |
1797 | ||
1da177e4 LT |
1798 | config FB_VIRTUAL |
1799 | tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)" | |
1800 | depends on FB | |
87b48849 AD |
1801 | select FB_SYS_FILLRECT |
1802 | select FB_SYS_COPYAREA | |
1803 | select FB_SYS_IMAGEBLIT | |
52102c07 | 1804 | select FB_SYS_FOPS |
1da177e4 LT |
1805 | ---help--- |
1806 | This is a `virtual' frame buffer device. It operates on a chunk of | |
1807 | unswappable kernel memory instead of on the memory of a graphics | |
1808 | board. This means you cannot see any output sent to this frame | |
1809 | buffer device, while it does consume precious memory. The main use | |
1810 | of this frame buffer device is testing and debugging the frame | |
1811 | buffer subsystem. Do NOT enable it for normal systems! To protect | |
1812 | the innocent, it has to be enabled explicitly at boot time using the | |
1813 | kernel option `video=vfb:'. | |
1814 | ||
1815 | To compile this driver as a module, choose M here: the | |
66cf7512 MF |
1816 | module will be called vfb. In order to load it, you must use |
1817 | the vfb_enable=1 option. | |
1da177e4 LT |
1818 | |
1819 | If unsure, say N. | |
e0e34ef7 | 1820 | |
1da177e4 LT |
1821 | if VT |
1822 | source "drivers/video/console/Kconfig" | |
1823 | endif | |
1824 | ||
1825 | if FB || SGI_NEWPORT_CONSOLE | |
1826 | source "drivers/video/logo/Kconfig" | |
1827 | endif | |
1828 | ||
1da177e4 LT |
1829 | endmenu |
1830 |