]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | # |
2 | # Video configuration | |
3 | # | |
4 | ||
5 | menu "Graphics support" | |
6 | ||
ba70710e AD |
7 | config FIRMWARE_EDID |
8 | bool "Enable firmware EDID" | |
9 | default y | |
10 | ---help--- | |
11 | This enables access to the EDID transferred from the firmware. | |
12 | On the i386, this is from the Video BIOS. Enable this if DDC/I2C | |
13 | transfers do not work for your driver and if you are using | |
14 | nvidiafb, i810fb or savagefb. | |
15 | ||
16 | In general, choosing Y for this option is safe. If you | |
17 | experience extremely long delays while booting before you get | |
18 | something on your display, try setting this to N. Matrox cards in | |
19 | combination with certain motherboards and monitors are known to | |
20 | suffer from this problem. | |
21 | ||
1da177e4 LT |
22 | config FB |
23 | tristate "Support for frame buffer devices" | |
24 | ---help--- | |
25 | The frame buffer device provides an abstraction for the graphics | |
26 | hardware. It represents the frame buffer of some video hardware and | |
27 | allows application software to access the graphics hardware through | |
28 | a well-defined interface, so the software doesn't need to know | |
29 | anything about the low-level (hardware register) stuff. | |
30 | ||
31 | Frame buffer devices work identically across the different | |
32 | architectures supported by Linux and make the implementation of | |
33 | application programs easier and more portable; at this point, an X | |
34 | server exists which uses the frame buffer device exclusively. | |
35 | On several non-X86 architectures, the frame buffer device is the | |
36 | only way to use the graphics hardware. | |
37 | ||
38 | The device is accessed through special device nodes, usually located | |
39 | in the /dev directory, i.e. /dev/fb*. | |
40 | ||
41 | You need an utility program called fbset to make full use of frame | |
42 | buffer devices. Please read <file:Documentation/fb/framebuffer.txt> | |
43 | and the Framebuffer-HOWTO at | |
44 | <http://www.tahallah.demon.co.uk/programming/prog.html> for more | |
45 | information. | |
46 | ||
47 | Say Y here and to the driver for your graphics board below if you | |
48 | are compiling a kernel for a non-x86 architecture. | |
49 | ||
50 | If you are compiling for the x86 architecture, you can say Y if you | |
51 | want to play with it, but it is not essential. Please note that | |
52 | running graphical applications that directly touch the hardware | |
53 | (e.g. an accelerated X server) and that are not frame buffer | |
54 | device-aware may cause unexpected results. If unsure, say N. | |
55 | ||
fc5891c8 DM |
56 | config FB_DDC |
57 | tristate | |
58 | depends on FB && I2C && I2C_ALGOBIT | |
59 | default n | |
60 | ||
1da177e4 LT |
61 | config FB_CFB_FILLRECT |
62 | tristate | |
63 | depends on FB | |
64 | default n | |
65 | ---help--- | |
66 | Include the cfb_fillrect function for generic software rectangle | |
67 | filling. This is used by drivers that don't provide their own | |
68 | (accelerated) version. | |
69 | ||
70 | config FB_CFB_COPYAREA | |
71 | tristate | |
72 | depends on FB | |
73 | default n | |
74 | ---help--- | |
75 | Include the cfb_copyarea function for generic software area copying. | |
76 | This is used by drivers that don't provide their own (accelerated) | |
77 | version. | |
78 | ||
79 | config FB_CFB_IMAGEBLIT | |
80 | tristate | |
81 | depends on FB | |
82 | default n | |
83 | ---help--- | |
84 | Include the cfb_imageblit function for generic software image | |
85 | blitting. This is used by drivers that don't provide their own | |
86 | (accelerated) version. | |
87 | ||
a268422d OZ |
88 | config FB_SVGALIB |
89 | tristate | |
90 | depends on FB | |
91 | default n | |
92 | ---help--- | |
93 | Common utility functions useful to fbdev drivers of VGA-based | |
94 | cards. | |
95 | ||
1da177e4 LT |
96 | config FB_MACMODES |
97 | tristate | |
98 | depends on FB | |
99 | default n | |
100 | ||
5474c120 | 101 | config FB_BACKLIGHT |
4b755999 MH |
102 | bool |
103 | depends on FB | |
104 | select BACKLIGHT_LCD_SUPPORT | |
105 | select BACKLIGHT_CLASS_DEVICE | |
106 | default n | |
5474c120 | 107 | |
1da177e4 LT |
108 | config FB_MODE_HELPERS |
109 | bool "Enable Video Mode Handling Helpers" | |
110 | depends on FB | |
111 | default n | |
112 | ---help--- | |
113 | This enables functions for handling video modes using the | |
114 | Generalized Timing Formula and the EDID parser. A few drivers rely | |
115 | on this feature such as the radeonfb, rivafb, and the i810fb. If | |
116 | your driver does not take advantage of this feature, choosing Y will | |
117 | just increase the kernel size by about 5K. | |
118 | ||
119 | config FB_TILEBLITTING | |
120 | bool "Enable Tile Blitting Support" | |
121 | depends on FB | |
122 | default n | |
123 | ---help--- | |
124 | This enables tile blitting. Tile blitting is a drawing technique | |
125 | where the screen is divided into rectangular sections (tiles), whereas | |
126 | the standard blitting divides the screen into pixels. Because the | |
127 | default drawing element is a tile, drawing functions will be passed | |
128 | parameters in terms of number of tiles instead of number of pixels. | |
129 | For example, to draw a single character, instead of using bitmaps, | |
130 | an index to an array of bitmaps will be used. To clear or move a | |
131 | rectangular section of a screen, the rectangle will be described in | |
132 | terms of number of tiles in the x- and y-axis. | |
133 | ||
134 | This is particularly important to one driver, matroxfb. If | |
135 | unsure, say N. | |
136 | ||
137 | config FB_CIRRUS | |
138 | tristate "Cirrus Logic support" | |
139 | depends on FB && (ZORRO || PCI) | |
140 | select FB_CFB_FILLRECT | |
141 | select FB_CFB_COPYAREA | |
142 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
143 | ---help--- |
144 | This enables support for Cirrus Logic GD542x/543x based boards on | |
145 | Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum. | |
146 | ||
147 | If you have a PCI-based system, this enables support for these | |
148 | chips: GD-543x, GD-544x, GD-5480. | |
149 | ||
150 | Please read the file <file:Documentation/fb/cirrusfb.txt>. | |
151 | ||
152 | Say N unless you have such a graphics board or plan to get one | |
153 | before you next recompile the kernel. | |
154 | ||
155 | config FB_PM2 | |
156 | tristate "Permedia2 support" | |
157 | depends on FB && ((AMIGA && BROKEN) || PCI) | |
158 | select FB_CFB_FILLRECT | |
159 | select FB_CFB_COPYAREA | |
160 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
161 | help |
162 | This is the frame buffer device driver for the Permedia2 AGP frame | |
163 | buffer card from ASK, aka `Graphic Blaster Exxtreme'. There is a | |
164 | product page at | |
165 | <http://www.ask.com.hk/product/Permedia%202/permedia2.htm>. | |
166 | ||
167 | config FB_PM2_FIFO_DISCONNECT | |
168 | bool "enable FIFO disconnect feature" | |
169 | depends on FB_PM2 && PCI | |
170 | help | |
171 | Support the Permedia2 FIFO disconnect feature (see CONFIG_FB_PM2). | |
172 | ||
173 | config FB_ARMCLCD | |
174 | tristate "ARM PrimeCell PL110 support" | |
175 | depends on FB && ARM && ARM_AMBA | |
176 | select FB_CFB_FILLRECT | |
177 | select FB_CFB_COPYAREA | |
178 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
179 | help |
180 | This framebuffer device driver is for the ARM PrimeCell PL110 | |
181 | Colour LCD controller. ARM PrimeCells provide the building | |
182 | blocks for System on a Chip devices. | |
183 | ||
184 | If you want to compile this as a module (=code which can be | |
185 | inserted into and removed from the running kernel), say M | |
186 | here and read <file:Documentation/modules.txt>. The module | |
187 | will be called amba-clcd. | |
188 | ||
903e2bbd MS |
189 | choice |
190 | ||
191 | depends on FB_ARMCLCD && (ARCH_LH7A40X || ARCH_LH7952X) | |
192 | prompt "LCD Panel" | |
193 | default FB_ARMCLCD_SHARP_LQ035Q7DB02 | |
194 | ||
195 | config FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT | |
196 | bool "LogicPD LCD 3.5\" QVGA w/HRTFT IC" | |
197 | help | |
198 | This is an implementation of the Sharp LQ035Q7DB02, a 3.5" | |
cab00891 | 199 | color QVGA, HRTFT panel. The LogicPD device includes |
903e2bbd MS |
200 | an integrated HRTFT controller IC. |
201 | The native resolution is 240x320. | |
202 | ||
203 | config FB_ARMCLCD_SHARP_LQ057Q3DC02 | |
204 | bool "LogicPD LCD 5.7\" QVGA" | |
205 | help | |
206 | This is an implementation of the Sharp LQ057Q3DC02, a 5.7" | |
207 | color QVGA, TFT panel. The LogicPD device includes an | |
208 | The native resolution is 320x240. | |
209 | ||
210 | config FB_ARMCLCD_SHARP_LQ64D343 | |
211 | bool "LogicPD LCD 6.4\" VGA" | |
212 | help | |
213 | This is an implementation of the Sharp LQ64D343, a 6.4" | |
214 | color VGA, TFT panel. The LogicPD device includes an | |
215 | The native resolution is 640x480. | |
216 | ||
217 | config FB_ARMCLCD_SHARP_LQ10D368 | |
218 | bool "LogicPD LCD 10.4\" VGA" | |
219 | help | |
220 | This is an implementation of the Sharp LQ10D368, a 10.4" | |
221 | color VGA, TFT panel. The LogicPD device includes an | |
222 | The native resolution is 640x480. | |
223 | ||
224 | ||
225 | config FB_ARMCLCD_SHARP_LQ121S1DG41 | |
226 | bool "LogicPD LCD 12.1\" SVGA" | |
227 | help | |
228 | This is an implementation of the Sharp LQ121S1DG41, a 12.1" | |
229 | color SVGA, TFT panel. The LogicPD device includes an | |
230 | The native resolution is 800x600. | |
231 | ||
232 | This panel requires a clock rate may be an integer fraction | |
233 | of the base LCDCLK frequency. The driver will select the | |
234 | highest frequency available that is lower than the maximum | |
235 | allowed. The panel may flicker if the clock rate is | |
236 | slower than the recommended minimum. | |
237 | ||
238 | config FB_ARMCLCD_AUO_A070VW01_WIDE | |
239 | bool "AU Optronics A070VW01 LCD 7.0\" WIDE" | |
240 | help | |
241 | This is an implementation of the AU Optronics, a 7.0" | |
242 | WIDE Color. The native resolution is 234x480. | |
243 | ||
244 | config FB_ARMCLCD_HITACHI | |
245 | bool "Hitachi Wide Screen 800x480" | |
246 | help | |
247 | This is an implementation of the Hitachi 800x480. | |
248 | ||
249 | endchoice | |
250 | ||
251 | ||
1da177e4 LT |
252 | config FB_ACORN |
253 | bool "Acorn VIDC support" | |
254 | depends on (FB = y) && ARM && (ARCH_ACORN || ARCH_CLPS7500) | |
255 | select FB_CFB_FILLRECT | |
256 | select FB_CFB_COPYAREA | |
257 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
258 | help |
259 | This is the frame buffer device driver for the Acorn VIDC graphics | |
260 | hardware found in Acorn RISC PCs and other ARM-based machines. If | |
261 | unsure, say N. | |
262 | ||
263 | config FB_CLPS711X | |
264 | bool "CLPS711X LCD support" | |
265 | depends on (FB = y) && ARM && ARCH_CLPS711X | |
266 | select FB_CFB_FILLRECT | |
267 | select FB_CFB_COPYAREA | |
268 | select FB_CFB_IMAGEBLIT | |
e65c0850 RD |
269 | help |
270 | Say Y to enable the Framebuffer driver for the CLPS7111 and | |
271 | EP7212 processors. | |
1da177e4 LT |
272 | |
273 | config FB_SA1100 | |
274 | bool "SA-1100 LCD support" | |
275 | depends on (FB = y) && ARM && ARCH_SA1100 | |
276 | select FB_CFB_FILLRECT | |
277 | select FB_CFB_COPYAREA | |
278 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
279 | help |
280 | This is a framebuffer device for the SA-1100 LCD Controller. | |
281 | See <http://www.linux-fbdev.org/> for information on framebuffer | |
282 | devices. | |
283 | ||
284 | If you plan to use the LCD display with your SA-1100 system, say | |
285 | Y here. | |
286 | ||
7c2f891c SH |
287 | config FB_IMX |
288 | tristate "Motorola i.MX LCD support" | |
289 | depends on FB && ARM && ARCH_IMX | |
290 | select FB_CFB_FILLRECT | |
291 | select FB_CFB_COPYAREA | |
292 | select FB_CFB_IMAGEBLIT | |
7c2f891c | 293 | |
1da177e4 LT |
294 | config FB_CYBER2000 |
295 | tristate "CyberPro 2000/2010/5000 support" | |
296 | depends on FB && PCI && (BROKEN || !SPARC64) | |
297 | select FB_CFB_FILLRECT | |
298 | select FB_CFB_COPYAREA | |
299 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
300 | help |
301 | This enables support for the Integraphics CyberPro 20x0 and 5000 | |
302 | VGA chips used in the Rebel.com Netwinder and other machines. | |
303 | Say Y if you have a NetWinder or a graphics card containing this | |
304 | device, otherwise say N. | |
305 | ||
306 | config FB_APOLLO | |
307 | bool | |
308 | depends on (FB = y) && APOLLO | |
309 | default y | |
310 | select FB_CFB_FILLRECT | |
311 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
312 | |
313 | config FB_Q40 | |
314 | bool | |
315 | depends on (FB = y) && Q40 | |
316 | default y | |
317 | select FB_CFB_FILLRECT | |
318 | select FB_CFB_COPYAREA | |
319 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
320 | |
321 | config FB_AMIGA | |
322 | tristate "Amiga native chipset support" | |
323 | depends on FB && AMIGA | |
1da177e4 LT |
324 | help |
325 | This is the frame buffer device driver for the builtin graphics | |
326 | chipset found in Amigas. | |
327 | ||
328 | To compile this driver as a module, choose M here: the | |
329 | module will be called amifb. | |
330 | ||
331 | config FB_AMIGA_OCS | |
332 | bool "Amiga OCS chipset support" | |
333 | depends on FB_AMIGA | |
334 | help | |
335 | This enables support for the original Agnus and Denise video chips, | |
336 | found in the Amiga 1000 and most A500's and A2000's. If you intend | |
337 | to run Linux on any of these systems, say Y; otherwise say N. | |
338 | ||
339 | config FB_AMIGA_ECS | |
340 | bool "Amiga ECS chipset support" | |
341 | depends on FB_AMIGA | |
342 | help | |
343 | This enables support for the Enhanced Chip Set, found in later | |
344 | A500's, later A2000's, the A600, the A3000, the A3000T and CDTV. If | |
345 | you intend to run Linux on any of these systems, say Y; otherwise | |
346 | say N. | |
347 | ||
348 | config FB_AMIGA_AGA | |
349 | bool "Amiga AGA chipset support" | |
350 | depends on FB_AMIGA | |
351 | help | |
352 | This enables support for the Advanced Graphics Architecture (also | |
353 | known as the AGA or AA) Chip Set, found in the A1200, A4000, A4000T | |
354 | and CD32. If you intend to run Linux on any of these systems, say Y; | |
355 | otherwise say N. | |
356 | ||
1da177e4 LT |
357 | config FB_FM2 |
358 | bool "Amiga FrameMaster II/Rainbow II support" | |
359 | depends on (FB = y) && ZORRO | |
360 | select FB_CFB_FILLRECT | |
361 | select FB_CFB_COPYAREA | |
362 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
363 | help |
364 | This is the frame buffer device driver for the Amiga FrameMaster | |
365 | card from BSC (exhibited 1992 but not shipped as a CBM product). | |
366 | ||
1154ea7d JK |
367 | config FB_ARC |
368 | tristate "Arc Monochrome LCD board support" | |
369 | depends on FB && X86 | |
370 | select FB_CFB_FILLRECT | |
371 | select FB_CFB_COPYAREA | |
372 | select FB_CFB_IMAGEBLIT | |
1154ea7d JK |
373 | help |
374 | This enables support for the Arc Monochrome LCD board. The board | |
375 | is based on the KS-108 lcd controller and is typically a matrix | |
376 | of 2*n chips. This driver was tested with a 128x64 panel. This | |
377 | driver supports it for use with x86 SBCs through a 16 bit GPIO | |
09509603 | 378 | interface (8 bit data, 8 bit control). If you anticipate using |
1154ea7d JK |
379 | this driver, say Y or M; otherwise say N. You must specify the |
380 | GPIO IO address to be used for setting control and data. | |
381 | ||
1da177e4 LT |
382 | config FB_ATARI |
383 | bool "Atari native chipset support" | |
384 | depends on (FB = y) && ATARI && BROKEN | |
385 | help | |
386 | This is the frame buffer device driver for the builtin graphics | |
387 | chipset found in Ataris. | |
388 | ||
389 | config FB_OF | |
390 | bool "Open Firmware frame buffer device support" | |
391 | depends on (FB = y) && (PPC64 || PPC_OF) | |
392 | select FB_CFB_FILLRECT | |
393 | select FB_CFB_COPYAREA | |
394 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
395 | select FB_MACMODES |
396 | help | |
397 | Say Y if you want support with Open Firmware for your graphics | |
398 | board. | |
399 | ||
400 | config FB_CONTROL | |
401 | bool "Apple \"control\" display support" | |
a04b61d3 | 402 | depends on (FB = y) && PPC_PMAC && PPC32 |
1da177e4 LT |
403 | select FB_CFB_FILLRECT |
404 | select FB_CFB_COPYAREA | |
405 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
406 | select FB_MACMODES |
407 | help | |
408 | This driver supports a frame buffer for the graphics adapter in the | |
409 | Power Macintosh 7300 and others. | |
410 | ||
411 | config FB_PLATINUM | |
412 | bool "Apple \"platinum\" display support" | |
a04b61d3 | 413 | depends on (FB = y) && PPC_PMAC && PPC32 |
1da177e4 LT |
414 | select FB_CFB_FILLRECT |
415 | select FB_CFB_COPYAREA | |
416 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
417 | select FB_MACMODES |
418 | help | |
419 | This driver supports a frame buffer for the "platinum" graphics | |
420 | adapter in some Power Macintoshes. | |
421 | ||
422 | config FB_VALKYRIE | |
423 | bool "Apple \"valkyrie\" display support" | |
a04b61d3 | 424 | depends on (FB = y) && (MAC || (PPC_PMAC && PPC32)) |
1da177e4 LT |
425 | select FB_CFB_FILLRECT |
426 | select FB_CFB_COPYAREA | |
427 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
428 | select FB_MACMODES |
429 | help | |
430 | This driver supports a frame buffer for the "valkyrie" graphics | |
431 | adapter in some Power Macintoshes. | |
432 | ||
433 | config FB_CT65550 | |
434 | bool "Chips 65550 display support" | |
a04b61d3 | 435 | depends on (FB = y) && PPC32 |
1da177e4 LT |
436 | select FB_CFB_FILLRECT |
437 | select FB_CFB_COPYAREA | |
438 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
439 | help |
440 | This is the frame buffer device driver for the Chips & Technologies | |
441 | 65550 graphics chip in PowerBooks. | |
442 | ||
443 | config FB_ASILIANT | |
e65c0850 | 444 | bool "Asiliant (Chips) 69000 display support" |
1da177e4 LT |
445 | depends on (FB = y) && PCI |
446 | select FB_CFB_FILLRECT | |
447 | select FB_CFB_COPYAREA | |
448 | select FB_CFB_IMAGEBLIT | |
4de0b1ee AD |
449 | help |
450 | This is the frame buffer device driver for the Asiliant 69030 chipset | |
1da177e4 LT |
451 | |
452 | config FB_IMSTT | |
453 | bool "IMS Twin Turbo display support" | |
454 | depends on (FB = y) && PCI | |
455 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
456 | select FB_MACMODES if PPC |
457 | help | |
458 | The IMS Twin Turbo is a PCI-based frame buffer card bundled with | |
459 | many Macintosh and compatible computers. | |
460 | ||
1da177e4 LT |
461 | config FB_VGA16 |
462 | tristate "VGA 16-color graphics support" | |
463 | depends on FB && (X86 || PPC) | |
464 | select FB_CFB_FILLRECT | |
465 | select FB_CFB_COPYAREA | |
466 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
467 | help |
468 | This is the frame buffer device driver for VGA 16 color graphic | |
469 | cards. Say Y if you have such a card. | |
470 | ||
471 | To compile this driver as a module, choose M here: the | |
472 | module will be called vga16fb. | |
473 | ||
474 | config FB_STI | |
475 | tristate "HP STI frame buffer device support" | |
476 | depends on FB && PARISC | |
477 | select FB_CFB_FILLRECT | |
478 | select FB_CFB_COPYAREA | |
479 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
480 | default y |
481 | ---help--- | |
482 | STI refers to the HP "Standard Text Interface" which is a set of | |
483 | BIOS routines contained in a ROM chip in HP PA-RISC based machines. | |
484 | Enabling this option will implement the linux framebuffer device | |
485 | using calls to the STI BIOS routines for initialisation. | |
486 | ||
487 | If you enable this option, you will get a planar framebuffer device | |
488 | /dev/fb which will work on the most common HP graphic cards of the | |
489 | NGLE family, including the artist chips (in the 7xx and Bxxx series), | |
490 | HCRX, HCRX24, CRX, CRX24 and VisEG series. | |
491 | ||
492 | It is safe to enable this option, so you should probably say "Y". | |
493 | ||
494 | config FB_MAC | |
495 | bool "Generic Macintosh display support" | |
496 | depends on (FB = y) && MAC | |
497 | select FB_CFB_FILLRECT | |
498 | select FB_CFB_COPYAREA | |
499 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
500 | select FB_MACMODES |
501 | ||
502 | # bool ' Apple DAFB display support' CONFIG_FB_DAFB | |
503 | config FB_HP300 | |
504 | bool | |
505 | depends on (FB = y) && HP300 | |
506 | select FB_CFB_FILLRECT | |
507 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
508 | default y |
509 | ||
510 | config FB_TGA | |
511 | tristate "TGA framebuffer support" | |
512 | depends on FB && ALPHA | |
513 | select FB_CFB_FILLRECT | |
514 | select FB_CFB_COPYAREA | |
515 | select FB_CFB_IMAGEBLIT | |
1c667682 | 516 | select BITREVERSE |
1da177e4 LT |
517 | help |
518 | This is the frame buffer device driver for generic TGA graphic | |
519 | cards. Say Y if you have one of those. | |
520 | ||
521 | config FB_VESA | |
522 | bool "VESA VGA graphics support" | |
0d078f6f | 523 | depends on (FB = y) && X86 |
1da177e4 LT |
524 | select FB_CFB_FILLRECT |
525 | select FB_CFB_COPYAREA | |
526 | select FB_CFB_IMAGEBLIT | |
c9b2ec4d | 527 | select VIDEO_SELECT |
1da177e4 LT |
528 | help |
529 | This is the frame buffer device driver for generic VESA 2.0 | |
530 | compliant graphic cards. The older VESA 1.2 cards are not supported. | |
531 | You will get a boot time penguin logo at no additional cost. Please | |
532 | read <file:Documentation/fb/vesafb.txt>. If unsure, say Y. | |
533 | ||
90b4f9ac EH |
534 | config FB_IMAC |
535 | bool "Intel-based Macintosh Framebuffer Support" | |
b64ef8af | 536 | depends on (FB = y) && X86 && EFI |
90b4f9ac EH |
537 | select FB_CFB_FILLRECT |
538 | select FB_CFB_COPYAREA | |
539 | select FB_CFB_IMAGEBLIT | |
540 | help | |
541 | This is the frame buffer device driver for the Intel-based Macintosh | |
542 | ||
1da177e4 LT |
543 | config FB_HGA |
544 | tristate "Hercules mono graphics support" | |
545 | depends on FB && X86 | |
546 | select FB_CFB_FILLRECT | |
547 | select FB_CFB_COPYAREA | |
548 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
549 | help |
550 | Say Y here if you have a Hercules mono graphics card. | |
551 | ||
552 | To compile this driver as a module, choose M here: the | |
553 | module will be called hgafb. | |
554 | ||
555 | As this card technology is 15 years old, most people will answer N | |
556 | here. | |
557 | ||
558 | config FB_HGA_ACCEL | |
559 | bool "Hercules mono Acceleration functions (EXPERIMENTAL)" | |
560 | depends on FB_HGA && EXPERIMENTAL | |
561 | ---help--- | |
562 | This will compile the Hercules mono graphics with | |
563 | acceleration functions. | |
564 | ||
1da177e4 LT |
565 | config FB_SGIVW |
566 | tristate "SGI Visual Workstation framebuffer support" | |
567 | depends on FB && X86_VISWS | |
568 | select FB_CFB_FILLRECT | |
569 | select FB_CFB_COPYAREA | |
570 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
571 | help |
572 | SGI Visual Workstation support for framebuffer graphics. | |
573 | ||
574 | config FB_GBE | |
575 | bool "SGI Graphics Backend frame buffer support" | |
576 | depends on (FB = y) && (SGI_IP32 || X86_VISWS) | |
577 | select FB_CFB_FILLRECT | |
578 | select FB_CFB_COPYAREA | |
579 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
580 | help |
581 | This is the frame buffer device driver for SGI Graphics Backend. | |
582 | This chip is used in SGI O2 and Visual Workstation 320/540. | |
583 | ||
584 | config FB_GBE_MEM | |
585 | int "Video memory size in MB" | |
586 | depends on FB_GBE | |
80c410dc | 587 | default 4 |
1da177e4 LT |
588 | help |
589 | This is the amount of memory reserved for the framebuffer, | |
590 | which can be any value between 1MB and 8MB. | |
591 | ||
1a571986 MF |
592 | config FB_SBUS |
593 | bool "SBUS and UPA framebuffers" | |
0b57ee9e | 594 | depends on (FB = y) && SPARC |
1a571986 MF |
595 | help |
596 | Say Y if you want support for SBUS or UPA based frame buffer device. | |
597 | ||
1da177e4 LT |
598 | config FB_BW2 |
599 | bool "BWtwo support" | |
e019630e | 600 | depends on (FB = y) && (SPARC && FB_SBUS) |
1da177e4 LT |
601 | select FB_CFB_FILLRECT |
602 | select FB_CFB_COPYAREA | |
603 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
604 | help |
605 | This is the frame buffer device driver for the BWtwo frame buffer. | |
606 | ||
607 | config FB_CG3 | |
608 | bool "CGthree support" | |
e019630e | 609 | depends on (FB = y) && (SPARC && FB_SBUS) |
1a571986 | 610 | select FB_CFB_FILLRECT |
1da177e4 LT |
611 | select FB_CFB_COPYAREA |
612 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
613 | help |
614 | This is the frame buffer device driver for the CGthree frame buffer. | |
615 | ||
616 | config FB_CG6 | |
617 | bool "CGsix (GX,TurboGX) support" | |
e019630e | 618 | depends on (FB = y) && (SPARC && FB_SBUS) |
1da177e4 LT |
619 | select FB_CFB_COPYAREA |
620 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
621 | help |
622 | This is the frame buffer device driver for the CGsix (GX, TurboGX) | |
623 | frame buffer. | |
624 | ||
625 | config FB_PVR2 | |
626 | tristate "NEC PowerVR 2 display support" | |
627 | depends on FB && SH_DREAMCAST | |
628 | select FB_CFB_FILLRECT | |
629 | select FB_CFB_COPYAREA | |
630 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
631 | ---help--- |
632 | Say Y here if you have a PowerVR 2 card in your box. If you plan to | |
633 | run linux on your Dreamcast, you will have to say Y here. | |
634 | This driver may or may not work on other PowerVR 2 cards, but is | |
635 | totally untested. Use at your own risk. If unsure, say N. | |
636 | ||
637 | To compile this driver as a module, choose M here: the | |
638 | module will be called pvr2fb. | |
639 | ||
640 | You can pass several parameters to the driver at boot time or at | |
641 | module load time. The parameters look like "video=pvr2:XXX", where | |
642 | the meaning of XXX can be found at the end of the main source file | |
643 | (<file:drivers/video/pvr2fb.c>). Please see the file | |
644 | <file:Documentation/fb/pvr2fb.txt>. | |
645 | ||
646 | config FB_EPSON1355 | |
647 | bool "Epson 1355 framebuffer support" | |
648 | depends on (FB = y) && (SUPERH || ARCH_CEIVA) | |
649 | select FB_CFB_FILLRECT | |
650 | select FB_CFB_COPYAREA | |
651 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
652 | help |
653 | Build in support for the SED1355 Epson Research Embedded RAMDAC | |
654 | LCD/CRT Controller (since redesignated as the S1D13505) as a | |
655 | framebuffer. Product specs at | |
656 | <http://www.erd.epson.com/vdc/html/products.htm>. | |
657 | ||
ecc41d5e RD |
658 | config FB_S1D13XXX |
659 | tristate "Epson S1D13XXX framebuffer support" | |
660 | depends on FB | |
661 | select FB_CFB_FILLRECT | |
662 | select FB_CFB_COPYAREA | |
663 | select FB_CFB_IMAGEBLIT | |
ecc41d5e RD |
664 | help |
665 | Support for S1D13XXX framebuffer device family (currently only | |
666 | working with S1D13806). Product specs at | |
667 | <http://www.erd.epson.com/vdc/html/legacy_13xxx.htm> | |
668 | ||
1da177e4 LT |
669 | config FB_NVIDIA |
670 | tristate "nVidia Framebuffer Support" | |
671 | depends on FB && PCI | |
672 | select I2C_ALGOBIT if FB_NVIDIA_I2C | |
673 | select I2C if FB_NVIDIA_I2C | |
674 | select FB_MODE_HELPERS | |
675 | select FB_CFB_FILLRECT | |
676 | select FB_CFB_COPYAREA | |
677 | select FB_CFB_IMAGEBLIT | |
1c667682 | 678 | select BITREVERSE |
1da177e4 LT |
679 | help |
680 | This driver supports graphics boards with the nVidia chips, TNT | |
681 | and newer. For very old chipsets, such as the RIVA128, then use | |
682 | the rivafb. | |
683 | Say Y if you have such a graphics board. | |
684 | ||
685 | To compile this driver as a module, choose M here: the | |
686 | module will be called nvidiafb. | |
687 | ||
688 | config FB_NVIDIA_I2C | |
689 | bool "Enable DDC Support" | |
85f1503a | 690 | depends on FB_NVIDIA |
1da177e4 LT |
691 | help |
692 | This enables I2C support for nVidia Chipsets. This is used | |
693 | only for getting EDID information from the attached display | |
694 | allowing for robust video mode handling and switching. | |
695 | ||
696 | Because fbdev-2.6 requires that drivers must be able to | |
697 | independently validate video mode parameters, you should say Y | |
698 | here. | |
699 | ||
5474c120 MH |
700 | config FB_NVIDIA_BACKLIGHT |
701 | bool "Support for backlight control" | |
4b755999 | 702 | depends on FB_NVIDIA && PMAC_BACKLIGHT |
5474c120 | 703 | select FB_BACKLIGHT |
5474c120 MH |
704 | default y |
705 | help | |
706 | Say Y here if you want to control the backlight of your display. | |
707 | ||
1da177e4 LT |
708 | config FB_RIVA |
709 | tristate "nVidia Riva support" | |
710 | depends on FB && PCI | |
711 | select I2C_ALGOBIT if FB_RIVA_I2C | |
712 | select I2C if FB_RIVA_I2C | |
bf5df0a2 | 713 | select FB_DDC if FB_RIVA_I2C |
1da177e4 LT |
714 | select FB_MODE_HELPERS |
715 | select FB_CFB_FILLRECT | |
716 | select FB_CFB_COPYAREA | |
717 | select FB_CFB_IMAGEBLIT | |
1c667682 | 718 | select BITREVERSE |
1da177e4 LT |
719 | help |
720 | This driver supports graphics boards with the nVidia Riva/Geforce | |
721 | chips. | |
722 | Say Y if you have such a graphics board. | |
723 | ||
724 | To compile this driver as a module, choose M here: the | |
725 | module will be called rivafb. | |
726 | ||
727 | config FB_RIVA_I2C | |
728 | bool "Enable DDC Support" | |
729 | depends on FB_RIVA | |
730 | help | |
731 | This enables I2C support for nVidia Chipsets. This is used | |
732 | only for getting EDID information from the attached display | |
733 | allowing for robust video mode handling and switching. | |
734 | ||
735 | Because fbdev-2.6 requires that drivers must be able to | |
736 | independently validate video mode parameters, you should say Y | |
737 | here. | |
738 | ||
739 | config FB_RIVA_DEBUG | |
740 | bool "Lots of debug output from Riva(nVidia) driver" | |
741 | depends on FB_RIVA | |
742 | default n | |
743 | help | |
744 | Say Y here if you want the Riva driver to output all sorts | |
09509603 | 745 | of debugging information to provide to the maintainer when |
1da177e4 LT |
746 | something goes wrong. |
747 | ||
5474c120 MH |
748 | config FB_RIVA_BACKLIGHT |
749 | bool "Support for backlight control" | |
4b755999 | 750 | depends on FB_RIVA && PMAC_BACKLIGHT |
5474c120 | 751 | select FB_BACKLIGHT |
5474c120 MH |
752 | default y |
753 | help | |
754 | Say Y here if you want to control the backlight of your display. | |
755 | ||
1da177e4 LT |
756 | config FB_I810 |
757 | tristate "Intel 810/815 support (EXPERIMENTAL)" | |
0d078f6f | 758 | depends on FB && EXPERIMENTAL && PCI && X86_32 |
1da177e4 LT |
759 | select AGP |
760 | select AGP_INTEL | |
761 | select FB_MODE_HELPERS | |
762 | select FB_CFB_FILLRECT | |
763 | select FB_CFB_COPYAREA | |
764 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
765 | help |
766 | This driver supports the on-board graphics built in to the Intel 810 | |
767 | and 815 chipsets. Say Y if you have and plan to use such a board. | |
768 | ||
769 | To compile this driver as a module, choose M here: the | |
770 | module will be called i810fb. | |
771 | ||
772 | For more information, please read | |
773 | <file:Documentation/fb/intel810.txt> | |
774 | ||
775 | config FB_I810_GTF | |
776 | bool "use VESA Generalized Timing Formula" | |
777 | depends on FB_I810 | |
778 | help | |
779 | If you say Y, then the VESA standard, Generalized Timing Formula | |
780 | or GTF, will be used to calculate the required video timing values | |
781 | per video mode. Since the GTF allows nondiscrete timings | |
782 | (nondiscrete being a range of values as opposed to discrete being a | |
783 | set of values), you'll be able to use any combination of horizontal | |
784 | and vertical resolutions, and vertical refresh rates without having | |
785 | to specify your own timing parameters. This is especially useful | |
786 | to maximize the performance of an aging display, or if you just | |
787 | have a display with nonstandard dimensions. A VESA compliant | |
788 | monitor is recommended, but can still work with non-compliant ones. | |
789 | If you need or want this, then select this option. The timings may | |
790 | not be compliant with Intel's recommended values. Use at your own | |
791 | risk. | |
792 | ||
793 | If you say N, the driver will revert to discrete video timings | |
794 | using a set recommended by Intel in their documentation. | |
795 | ||
796 | If unsure, say N. | |
797 | ||
74f6ae84 AD |
798 | config FB_I810_I2C |
799 | bool "Enable DDC Support" | |
db84502b AD |
800 | depends on FB_I810 && FB_I810_GTF |
801 | select I2C | |
74f6ae84 | 802 | select I2C_ALGOBIT |
e80987f8 | 803 | select FB_DDC |
74f6ae84 AD |
804 | help |
805 | ||
1da177e4 | 806 | config FB_INTEL |
d463d34e | 807 | tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G support (EXPERIMENTAL)" |
0c187add | 808 | depends on FB && EXPERIMENTAL && PCI && X86 |
1da177e4 LT |
809 | select AGP |
810 | select AGP_INTEL | |
1f6e8449 DM |
811 | select I2C_ALGOBIT if FB_INTEL_I2C |
812 | select I2C if FB_INTEL_I2C | |
1da177e4 LT |
813 | select FB_MODE_HELPERS |
814 | select FB_CFB_FILLRECT | |
815 | select FB_CFB_COPYAREA | |
816 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
817 | help |
818 | This driver supports the on-board graphics built in to the Intel | |
d463d34e | 819 | 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets. |
1da177e4 LT |
820 | Say Y if you have and plan to use such a board. |
821 | ||
1f6e8449 DM |
822 | If you say Y here and want DDC/I2C support you must first say Y to |
823 | "I2C support" and "I2C bit-banging support" in the character devices | |
824 | section. | |
825 | ||
826 | If you say M here then "I2C support" and "I2C bit-banging support" | |
827 | can be build either as modules or built-in. | |
828 | ||
829 | To compile this driver as a module, choose M here: the | |
1da177e4 LT |
830 | module will be called intelfb. |
831 | ||
d463d34e CM |
832 | For more information, please read <file:Documentation/fb/intelfb.txt> |
833 | ||
1da177e4 | 834 | config FB_INTEL_DEBUG |
1f6e8449 | 835 | bool "Intel driver Debug Messages" |
1da177e4 LT |
836 | depends on FB_INTEL |
837 | ---help--- | |
838 | Say Y here if you want the Intel driver to output all sorts | |
09509603 | 839 | of debugging information to provide to the maintainer when |
1da177e4 LT |
840 | something goes wrong. |
841 | ||
1f6e8449 DM |
842 | config FB_INTEL_I2C |
843 | bool "DDC/I2C for Intel framebuffer support" | |
844 | depends on FB_INTEL | |
845 | default y | |
846 | help | |
847 | Say Y here if you want DDC/I2C support for your on-board Intel graphics. | |
848 | ||
1da177e4 LT |
849 | config FB_MATROX |
850 | tristate "Matrox acceleration" | |
851 | depends on FB && PCI | |
852 | select FB_CFB_FILLRECT | |
853 | select FB_CFB_COPYAREA | |
854 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
855 | select FB_TILEBLITTING |
856 | select FB_MACMODES if PPC_PMAC | |
857 | ---help--- | |
858 | Say Y here if you have a Matrox Millennium, Matrox Millennium II, | |
859 | Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox | |
860 | Mystique G200, Matrox Millennium G200, Matrox Marvel G200 video, | |
861 | Matrox G400, G450 or G550 card in your box. | |
862 | ||
863 | To compile this driver as a module, choose M here: the | |
864 | module will be called matroxfb. | |
865 | ||
866 | You can pass several parameters to the driver at boot time or at | |
867 | module load time. The parameters look like "video=matrox:XXX", and | |
868 | are described in <file:Documentation/fb/matroxfb.txt>. | |
869 | ||
870 | config FB_MATROX_MILLENIUM | |
871 | bool "Millennium I/II support" | |
872 | depends on FB_MATROX | |
873 | help | |
874 | Say Y here if you have a Matrox Millennium or Matrox Millennium II | |
875 | video card. If you select "Advanced lowlevel driver options" below, | |
876 | you should check 4 bpp packed pixel, 8 bpp packed pixel, 16 bpp | |
877 | packed pixel, 24 bpp packed pixel and 32 bpp packed pixel. You can | |
878 | also use font widths different from 8. | |
879 | ||
880 | config FB_MATROX_MYSTIQUE | |
881 | bool "Mystique support" | |
882 | depends on FB_MATROX | |
883 | help | |
884 | Say Y here if you have a Matrox Mystique or Matrox Mystique 220 | |
885 | video card. If you select "Advanced lowlevel driver options" below, | |
886 | you should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp | |
887 | packed pixel and 32 bpp packed pixel. You can also use font widths | |
888 | different from 8. | |
889 | ||
890 | config FB_MATROX_G | |
891 | bool "G100/G200/G400/G450/G550 support" | |
892 | depends on FB_MATROX | |
893 | ---help--- | |
894 | Say Y here if you have a Matrox G100, G200, G400, G450 or G550 based | |
895 | video card. If you select "Advanced lowlevel driver options", you | |
896 | should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp packed | |
897 | pixel and 32 bpp packed pixel. You can also use font widths | |
898 | different from 8. | |
899 | ||
900 | If you need support for G400 secondary head, you must first say Y to | |
901 | "I2C support" in the character devices section, and then to | |
902 | "Matrox I2C support" and "G400 second head support" here in the | |
903 | framebuffer section. G450/G550 secondary head and digital output | |
904 | are supported without additional modules. | |
905 | ||
906 | The driver starts in monitor mode. You must use the matroxset tool | |
907 | (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to | |
908 | swap primary and secondary head outputs, or to change output mode. | |
909 | Secondary head driver always start in 640x480 resolution and you | |
910 | must use fbset to change it. | |
911 | ||
912 | Do not forget that second head supports only 16 and 32 bpp | |
913 | packed pixels, so it is a good idea to compile them into the kernel | |
914 | too. You can use only some font widths, as the driver uses generic | |
915 | painting procedures (the secondary head does not use acceleration | |
916 | engine). | |
917 | ||
918 | G450/G550 hardware can display TV picture only from secondary CRTC, | |
919 | and it performs no scaling, so picture must have 525 or 625 lines. | |
920 | ||
921 | config FB_MATROX_I2C | |
922 | tristate "Matrox I2C support" | |
923 | depends on FB_MATROX && I2C | |
924 | select I2C_ALGOBIT | |
925 | ---help--- | |
926 | This drivers creates I2C buses which are needed for accessing the | |
927 | DDC (I2C) bus present on all Matroxes, an I2C bus which | |
928 | interconnects Matrox optional devices, like MGA-TVO on G200 and | |
929 | G400, and the secondary head DDC bus, present on G400 only. | |
930 | ||
931 | You can say Y or M here if you want to experiment with monitor | |
932 | detection code. You must say Y or M here if you want to use either | |
933 | second head of G400 or MGA-TVO on G200 or G400. | |
934 | ||
935 | If you compile it as module, it will create a module named | |
936 | i2c-matroxfb. | |
937 | ||
938 | config FB_MATROX_MAVEN | |
939 | tristate "G400 second head support" | |
940 | depends on FB_MATROX_G && FB_MATROX_I2C | |
941 | ---help--- | |
942 | WARNING !!! This support does not work with G450 !!! | |
943 | ||
944 | Say Y or M here if you want to use a secondary head (meaning two | |
945 | monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary | |
946 | head is not compatible with accelerated XFree 3.3.x SVGA servers - | |
947 | secondary head output is blanked while you are in X. With XFree | |
948 | 3.9.17 preview you can use both heads if you use SVGA over fbdev or | |
949 | the fbdev driver on first head and the fbdev driver on second head. | |
950 | ||
951 | If you compile it as module, two modules are created, | |
952 | matroxfb_crtc2 and matroxfb_maven. Matroxfb_maven is needed for | |
953 | both G200 and G400, matroxfb_crtc2 is needed only by G400. You must | |
954 | also load i2c-matroxfb to get it to run. | |
955 | ||
956 | The driver starts in monitor mode and you must use the matroxset | |
957 | tool (available at | |
958 | <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to | |
959 | PAL or NTSC or to swap primary and secondary head outputs. | |
960 | Secondary head driver also always start in 640x480 resolution, you | |
961 | must use fbset to change it. | |
962 | ||
963 | Also do not forget that second head supports only 16 and 32 bpp | |
964 | packed pixels, so it is a good idea to compile them into the kernel | |
965 | too. You can use only some font widths, as the driver uses generic | |
966 | painting procedures (the secondary head does not use acceleration | |
967 | engine). | |
968 | ||
969 | config FB_MATROX_MULTIHEAD | |
970 | bool "Multihead support" | |
971 | depends on FB_MATROX | |
972 | ---help--- | |
973 | Say Y here if you have more than one (supported) Matrox device in | |
974 | your computer and you want to use all of them for different monitors | |
975 | ("multihead"). If you have only one device, you should say N because | |
976 | the driver compiled with Y is larger and a bit slower, especially on | |
977 | ia32 (ix86). | |
978 | ||
979 | If you said M to "Matrox unified accelerated driver" and N here, you | |
980 | will still be able to use several Matrox devices simultaneously: | |
981 | insert several instances of the module matroxfb into the kernel | |
982 | with insmod, supplying the parameter "dev=N" where N is 0, 1, etc. | |
983 | for the different Matrox devices. This method is slightly faster but | |
984 | uses 40 KB of kernel memory per Matrox card. | |
985 | ||
986 | There is no need for enabling 'Matrox multihead support' if you have | |
987 | only one Matrox card in the box. | |
988 | ||
1da177e4 LT |
989 | config FB_RADEON |
990 | tristate "ATI Radeon display support" | |
991 | depends on FB && PCI | |
992 | select I2C_ALGOBIT if FB_RADEON_I2C | |
993 | select I2C if FB_RADEON_I2C | |
7a45093b | 994 | select FB_DDC if FB_RADEON_I2C |
1da177e4 LT |
995 | select FB_MODE_HELPERS |
996 | select FB_CFB_FILLRECT | |
997 | select FB_CFB_COPYAREA | |
998 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
999 | select FB_MACMODES if PPC_OF |
1000 | help | |
1001 | Choose this option if you want to use an ATI Radeon graphics card as | |
1002 | a framebuffer device. There are both PCI and AGP versions. You | |
1003 | don't need to choose this to run the Radeon in plain VGA mode. | |
1004 | ||
1005 | If you say Y here and want DDC/I2C support you must first say Y to | |
1006 | "I2C support" and "I2C bit-banging support" in the character devices | |
1007 | section. | |
1008 | ||
1009 | If you say M here then "I2C support" and "I2C bit-banging support" | |
1010 | can be build either as modules or built-in. | |
1011 | ||
1012 | There is a product page at | |
f510a3c3 | 1013 | http://apps.ati.com/ATIcompare/ |
5474c120 | 1014 | |
1da177e4 LT |
1015 | config FB_RADEON_I2C |
1016 | bool "DDC/I2C for ATI Radeon support" | |
1017 | depends on FB_RADEON | |
1018 | default y | |
1019 | help | |
1020 | Say Y here if you want DDC/I2C support for your Radeon board. | |
1021 | ||
5474c120 MH |
1022 | config FB_RADEON_BACKLIGHT |
1023 | bool "Support for backlight control" | |
4b755999 | 1024 | depends on FB_RADEON && PMAC_BACKLIGHT |
5474c120 | 1025 | select FB_BACKLIGHT |
5474c120 MH |
1026 | default y |
1027 | help | |
1028 | Say Y here if you want to control the backlight of your display. | |
1029 | ||
1da177e4 LT |
1030 | config FB_RADEON_DEBUG |
1031 | bool "Lots of debug output from Radeon driver" | |
1032 | depends on FB_RADEON | |
1033 | default n | |
1034 | help | |
1035 | Say Y here if you want the Radeon driver to output all sorts | |
09509603 | 1036 | of debugging information to provide to the maintainer when |
1da177e4 LT |
1037 | something goes wrong. |
1038 | ||
1039 | config FB_ATY128 | |
1040 | tristate "ATI Rage128 display support" | |
1041 | depends on FB && PCI | |
1042 | select FB_CFB_FILLRECT | |
1043 | select FB_CFB_COPYAREA | |
1044 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1045 | select FB_MACMODES if PPC_PMAC |
1046 | help | |
1047 | This driver supports graphics boards with the ATI Rage128 chips. | |
1048 | Say Y if you have such a graphics board and read | |
1049 | <file:Documentation/fb/aty128fb.txt>. | |
1050 | ||
1051 | To compile this driver as a module, choose M here: the | |
1052 | module will be called aty128fb. | |
1053 | ||
5474c120 MH |
1054 | config FB_ATY128_BACKLIGHT |
1055 | bool "Support for backlight control" | |
4b755999 | 1056 | depends on FB_ATY128 && PMAC_BACKLIGHT |
5474c120 | 1057 | select FB_BACKLIGHT |
5474c120 MH |
1058 | default y |
1059 | help | |
1060 | Say Y here if you want to control the backlight of your display. | |
1061 | ||
1da177e4 LT |
1062 | config FB_ATY |
1063 | tristate "ATI Mach64 display support" if PCI || ATARI | |
f2e782ef | 1064 | depends on FB && !SPARC32 |
1da177e4 LT |
1065 | select FB_CFB_FILLRECT |
1066 | select FB_CFB_COPYAREA | |
1067 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1068 | select FB_MACMODES if PPC |
1069 | help | |
1070 | This driver supports graphics boards with the ATI Mach64 chips. | |
1071 | Say Y if you have such a graphics board. | |
1072 | ||
1073 | To compile this driver as a module, choose M here: the | |
1074 | module will be called atyfb. | |
1075 | ||
1076 | config FB_ATY_CT | |
1077 | bool "Mach64 CT/VT/GT/LT (incl. 3D RAGE) support" | |
1078 | depends on PCI && FB_ATY | |
1079 | default y if SPARC64 && FB_PCI | |
1080 | help | |
1081 | Say Y here to support use of ATI's 64-bit Rage boards (or other | |
1082 | boards based on the Mach64 CT, VT, GT, and LT chipsets) as a | |
1083 | framebuffer device. The ATI product support page for these boards | |
1084 | is at <http://support.ati.com/products/pc/mach64/>. | |
1085 | ||
1086 | config FB_ATY_GENERIC_LCD | |
1087 | bool "Mach64 generic LCD support (EXPERIMENTAL)" | |
1088 | depends on FB_ATY_CT | |
1089 | help | |
1090 | Say Y if you have a laptop with an ATI Rage LT PRO, Rage Mobility, | |
1091 | Rage XC, or Rage XL chipset. | |
1092 | ||
1da177e4 LT |
1093 | config FB_ATY_GX |
1094 | bool "Mach64 GX support" if PCI | |
1095 | depends on FB_ATY | |
1096 | default y if ATARI | |
1097 | help | |
1098 | Say Y here to support use of the ATI Mach64 Graphics Expression | |
1099 | board (or other boards based on the Mach64 GX chipset) as a | |
1100 | framebuffer device. The ATI product support page for these boards | |
1101 | is at | |
1102 | <http://support.ati.com/products/pc/mach64/graphics_xpression.html>. | |
1103 | ||
5474c120 MH |
1104 | config FB_ATY_BACKLIGHT |
1105 | bool "Support for backlight control" | |
4b755999 | 1106 | depends on FB_ATY && PMAC_BACKLIGHT |
5474c120 | 1107 | select FB_BACKLIGHT |
5474c120 MH |
1108 | default y |
1109 | help | |
1110 | Say Y here if you want to control the backlight of your display. | |
1111 | ||
a268422d OZ |
1112 | config FB_S3 |
1113 | tristate "S3 Trio/Virge support" | |
1114 | depends on FB && PCI | |
1115 | select FB_CFB_FILLRECT | |
1116 | select FB_CFB_COPYAREA | |
1117 | select FB_CFB_IMAGEBLIT | |
1118 | select FB_TILEBLITTING | |
1119 | select FB_SVGALIB | |
1120 | ---help--- | |
1121 | Driver for graphics boards with S3 Trio / S3 Virge chip. | |
1122 | ||
1da177e4 LT |
1123 | config FB_SAVAGE |
1124 | tristate "S3 Savage support" | |
1125 | depends on FB && PCI && EXPERIMENTAL | |
1126 | select I2C_ALGOBIT if FB_SAVAGE_I2C | |
1127 | select I2C if FB_SAVAGE_I2C | |
946c4eab | 1128 | select FB_DDC if FB_SAVAGE_I2C |
1da177e4 LT |
1129 | select FB_MODE_HELPERS |
1130 | select FB_CFB_FILLRECT | |
1131 | select FB_CFB_COPYAREA | |
1132 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1133 | help |
1134 | This driver supports notebooks and computers with S3 Savage PCI/AGP | |
1135 | chips. | |
1136 | ||
1137 | Say Y if you have such a graphics card. | |
1138 | ||
1139 | To compile this driver as a module, choose M here; the module | |
1140 | will be called savagefb. | |
1141 | ||
1142 | config FB_SAVAGE_I2C | |
1143 | bool "Enable DDC2 Support" | |
1144 | depends on FB_SAVAGE | |
1145 | help | |
1146 | This enables I2C support for S3 Savage Chipsets. This is used | |
1147 | only for getting EDID information from the attached display | |
1148 | allowing for robust video mode handling and switching. | |
1149 | ||
1150 | Because fbdev-2.6 requires that drivers must be able to | |
1151 | independently validate video mode parameters, you should say Y | |
1152 | here. | |
1153 | ||
1154 | config FB_SAVAGE_ACCEL | |
1155 | bool "Enable Console Acceleration" | |
1156 | depends on FB_SAVAGE | |
1157 | default n | |
1158 | help | |
1159 | This option will compile in console acceleration support. If | |
1160 | the resulting framebuffer console has bothersome glitches, then | |
1161 | choose N here. | |
1162 | ||
1163 | config FB_SIS | |
544393fe | 1164 | tristate "SiS/XGI display support" |
1da177e4 LT |
1165 | depends on FB && PCI |
1166 | select FB_CFB_FILLRECT | |
1167 | select FB_CFB_COPYAREA | |
1168 | select FB_CFB_IMAGEBLIT | |
1da177e4 | 1169 | help |
544393fe TW |
1170 | This is the frame buffer device driver for the SiS 300, 315, 330 |
1171 | and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets. | |
1172 | Specs available at <http://www.sis.com> and <http://www.xgitech.com>. | |
1da177e4 LT |
1173 | |
1174 | To compile this driver as a module, choose M here; the module | |
1175 | will be called sisfb. | |
1176 | ||
1177 | config FB_SIS_300 | |
1178 | bool "SiS 300 series support" | |
1179 | depends on FB_SIS | |
1180 | help | |
1181 | Say Y here to support use of the SiS 300/305, 540, 630 and 730. | |
1182 | ||
1183 | config FB_SIS_315 | |
544393fe | 1184 | bool "SiS 315/330/340 series and XGI support" |
1da177e4 LT |
1185 | depends on FB_SIS |
1186 | help | |
544393fe TW |
1187 | Say Y here to support use of the SiS 315, 330 and 340 series |
1188 | (315/H/PRO, 55x, 650, 651, 740, 330, 661, 741, 760, 761) as well | |
1189 | as XGI V3XT, V5, V8 and Z7. | |
1da177e4 LT |
1190 | |
1191 | config FB_NEOMAGIC | |
1192 | tristate "NeoMagic display support" | |
1193 | depends on FB && PCI | |
1194 | select FB_MODE_HELPERS | |
1195 | select FB_CFB_FILLRECT | |
1196 | select FB_CFB_COPYAREA | |
1197 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1198 | help |
1199 | This driver supports notebooks with NeoMagic PCI chips. | |
1200 | Say Y if you have such a graphics card. | |
1201 | ||
1202 | To compile this driver as a module, choose M here: the | |
1203 | module will be called neofb. | |
1204 | ||
1205 | config FB_KYRO | |
1206 | tristate "IMG Kyro support" | |
1207 | depends on FB && PCI | |
1208 | select FB_CFB_FILLRECT | |
1209 | select FB_CFB_COPYAREA | |
1210 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1211 | help |
1212 | Say Y here if you have a STG4000 / Kyro / PowerVR 3 based | |
1213 | graphics board. | |
1214 | ||
1215 | To compile this driver as a module, choose M here: the | |
1216 | module will be called kyrofb. | |
1217 | ||
1218 | config FB_3DFX | |
1219 | tristate "3Dfx Banshee/Voodoo3 display support" | |
1220 | depends on FB && PCI | |
1221 | select FB_CFB_IMAGEBLIT | |
1222 | select FB_CFB_FILLRECT | |
1223 | select FB_CFB_COPYAREA | |
1da177e4 LT |
1224 | help |
1225 | This driver supports graphics boards with the 3Dfx Banshee/Voodoo3 | |
1226 | chips. Say Y if you have such a graphics board. | |
1227 | ||
1228 | To compile this driver as a module, choose M here: the | |
1229 | module will be called tdfxfb. | |
1230 | ||
1231 | config FB_3DFX_ACCEL | |
1232 | bool "3Dfx Banshee/Voodoo3 Acceleration functions (EXPERIMENTAL)" | |
1233 | depends on FB_3DFX && EXPERIMENTAL | |
1234 | ---help--- | |
1235 | This will compile the 3Dfx Banshee/Voodoo3 frame buffer device | |
1236 | with acceleration functions. | |
1237 | ||
1238 | ||
1239 | config FB_VOODOO1 | |
1240 | tristate "3Dfx Voodoo Graphics (sst1) support" | |
1241 | depends on FB && PCI | |
1242 | select FB_CFB_FILLRECT | |
1243 | select FB_CFB_COPYAREA | |
1244 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1245 | ---help--- |
1246 | Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or | |
1247 | Voodoo2 (cvg) based graphics card. | |
1248 | ||
1249 | To compile this driver as a module, choose M here: the | |
1250 | module will be called sstfb. | |
1251 | ||
1252 | WARNING: Do not use any application that uses the 3D engine | |
1253 | (namely glide) while using this driver. | |
1254 | Please read the <file:Documentation/fb/README-sstfb.txt> for supported | |
1255 | options and other important info support. | |
1256 | ||
9fa68eae KP |
1257 | config FB_CYBLA |
1258 | tristate "Cyberblade/i1 support" | |
44637a12 | 1259 | depends on FB && PCI && X86_32 && !64BIT |
9fa68eae | 1260 | select FB_CFB_IMAGEBLIT |
9fa68eae KP |
1261 | select VIDEO_SELECT |
1262 | ---help--- | |
1263 | This driver is supposed to support the Trident Cyberblade/i1 | |
1264 | graphics core integrated in the VIA VT8601A North Bridge, | |
1265 | also known as VIA Apollo PLE133. | |
1266 | ||
1267 | Status: | |
1268 | - Developed, tested and working on EPIA 5000 and EPIA 800. | |
1269 | - Does work reliable on all systems with CRT/LCD connected to | |
1270 | normal VGA ports. | |
1271 | - Should work on systems that do use the internal LCD port, but | |
1272 | this is absolutely not tested. | |
1273 | ||
1274 | Character imageblit, copyarea and rectangle fill are hw accelerated, | |
1275 | ypan scrolling is used by default. | |
1276 | ||
1277 | Please do read <file:Documentation/fb/cyblafb/*>. | |
1278 | ||
1279 | To compile this driver as a module, choose M here: the | |
1280 | module will be called cyblafb. | |
1281 | ||
1da177e4 LT |
1282 | config FB_TRIDENT |
1283 | tristate "Trident support" | |
1284 | depends on FB && PCI | |
1285 | select FB_CFB_FILLRECT | |
1286 | select FB_CFB_COPYAREA | |
1287 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1288 | ---help--- |
1289 | This driver is supposed to support graphics boards with the | |
1290 | Trident CyberXXXX/Image/CyberBlade chips mostly found in laptops | |
1291 | but also on some motherboards. For more information, read | |
1292 | <file:Documentation/fb/tridentfb.txt> | |
1293 | ||
9fa68eae KP |
1294 | Cyberblade/i1 support will be removed soon, use the cyblafb driver |
1295 | instead. | |
1296 | ||
1da177e4 LT |
1297 | Say Y if you have such a graphics board. |
1298 | ||
9fa68eae | 1299 | |
1da177e4 LT |
1300 | To compile this driver as a module, choose M here: the |
1301 | module will be called tridentfb. | |
1302 | ||
1303 | config FB_TRIDENT_ACCEL | |
1304 | bool "Trident Acceleration functions (EXPERIMENTAL)" | |
1305 | depends on FB_TRIDENT && EXPERIMENTAL | |
1306 | ---help--- | |
1307 | This will compile the Trident frame buffer device with | |
1308 | acceleration functions. | |
1309 | ||
1da177e4 LT |
1310 | config FB_PM3 |
1311 | tristate "Permedia3 support" | |
1312 | depends on FB && PCI && BROKEN | |
1313 | help | |
1314 | This is the frame buffer device driver for the 3DLabs Permedia3 | |
1315 | chipset, used in Formac ProFormance III, 3DLabs Oxygen VX1 & | |
1316 | similar boards, 3DLabs Permedia3 Create!, Appian Jeronimo 2000 | |
1317 | and maybe other boards. | |
1318 | ||
1da177e4 LT |
1319 | config FB_AU1100 |
1320 | bool "Au1100 LCD Driver" | |
1321 | depends on (FB = y) && EXPERIMENTAL && PCI && MIPS && MIPS_PB1100=y | |
1322 | ||
f95ec3c6 RB |
1323 | config FB_AU1200 |
1324 | bool "Au1200 LCD Driver" | |
1325 | depends on FB && MIPS && SOC_AU1200 | |
1326 | select FB_CFB_FILLRECT | |
1327 | select FB_CFB_COPYAREA | |
1328 | select FB_CFB_IMAGEBLIT | |
1329 | help | |
1330 | This is the framebuffer driver for the AMD Au1200 SOC. It can drive | |
1331 | various panels and CRTs by passing in kernel cmd line option | |
1332 | au1200fb:panel=<name>. | |
1333 | ||
1da177e4 LT |
1334 | source "drivers/video/geode/Kconfig" |
1335 | ||
1da177e4 LT |
1336 | config FB_FFB |
1337 | bool "Creator/Creator3D/Elite3D support" | |
1338 | depends on FB_SBUS && SPARC64 | |
1339 | select FB_CFB_COPYAREA | |
1340 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1341 | help |
1342 | This is the frame buffer device driver for the Creator, Creator3D, | |
1343 | and Elite3D graphics boards. | |
1344 | ||
1345 | config FB_TCX | |
1346 | bool "TCX (SS4/SS5 only) support" | |
1347 | depends on FB_SBUS | |
1348 | select FB_CFB_FILLRECT | |
1349 | select FB_CFB_COPYAREA | |
1350 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1351 | help |
1352 | This is the frame buffer device driver for the TCX 24/8bit frame | |
1353 | buffer. | |
1354 | ||
1355 | config FB_CG14 | |
1356 | bool "CGfourteen (SX) support" | |
1357 | depends on FB_SBUS | |
1358 | select FB_CFB_FILLRECT | |
1359 | select FB_CFB_COPYAREA | |
1360 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1361 | help |
1362 | This is the frame buffer device driver for the CGfourteen frame | |
1363 | buffer on Desktop SPARCsystems with the SX graphics option. | |
1364 | ||
1365 | config FB_P9100 | |
1366 | bool "P9100 (Sparcbook 3 only) support" | |
1367 | depends on FB_SBUS | |
1368 | select FB_CFB_FILLRECT | |
1369 | select FB_CFB_COPYAREA | |
1370 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1371 | help |
1372 | This is the frame buffer device driver for the P9100 card | |
1373 | supported on Sparcbook 3 machines. | |
1374 | ||
1375 | config FB_LEO | |
1376 | bool "Leo (ZX) support" | |
1377 | depends on FB_SBUS | |
1378 | select FB_CFB_FILLRECT | |
1379 | select FB_CFB_COPYAREA | |
1380 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1381 | help |
1382 | This is the frame buffer device driver for the SBUS-based Sun ZX | |
1383 | (leo) frame buffer cards. | |
1384 | ||
1385 | config FB_PCI | |
1386 | bool "PCI framebuffers" | |
0b57ee9e | 1387 | depends on (FB = y) && PCI && SPARC |
1da177e4 LT |
1388 | |
1389 | config FB_IGA | |
1390 | bool "IGA 168x display support" | |
1391 | depends on SPARC32 && FB_PCI | |
1392 | select FB_CFB_FILLRECT | |
1393 | select FB_CFB_COPYAREA | |
1394 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1395 | help |
1396 | This is the framebuffer device for the INTERGRAPHICS 1680 and | |
1397 | successor frame buffer cards. | |
1398 | ||
1399 | config FB_HIT | |
1400 | tristate "HD64461 Frame Buffer support" | |
1401 | depends on FB && HD64461 | |
1402 | select FB_CFB_FILLRECT | |
1403 | select FB_CFB_COPYAREA | |
1404 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1405 | help |
1406 | This is the frame buffer device driver for the Hitachi HD64461 LCD | |
1407 | frame buffer card. | |
1408 | ||
1409 | config FB_PMAG_AA | |
1410 | bool "PMAG-AA TURBOchannel framebuffer support" | |
a9350003 | 1411 | depends on (FB = y) && TC |
1da177e4 LT |
1412 | select FB_CFB_FILLRECT |
1413 | select FB_CFB_COPYAREA | |
1414 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1415 | help |
1416 | Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1) | |
1417 | used mainly in the MIPS-based DECstation series. | |
1418 | ||
1419 | config FB_PMAG_BA | |
335dc50c MR |
1420 | tristate "PMAG-BA TURBOchannel framebuffer support" |
1421 | depends on FB && TC | |
1da177e4 LT |
1422 | select FB_CFB_FILLRECT |
1423 | select FB_CFB_COPYAREA | |
1424 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1425 | help |
1426 | Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8) | |
1427 | used mainly in the MIPS-based DECstation series. | |
1428 | ||
1429 | config FB_PMAGB_B | |
9084b005 MR |
1430 | tristate "PMAGB-B TURBOchannel framebuffer support" |
1431 | depends on TC | |
1da177e4 LT |
1432 | select FB_CFB_FILLRECT |
1433 | select FB_CFB_COPYAREA | |
1434 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1435 | help |
1436 | Support for the PMAGB-B TURBOchannel framebuffer card used mainly | |
1437 | in the MIPS-based DECstation series. The card is currently only | |
1438 | supported in 1280x1024x8 mode. | |
1439 | ||
1440 | config FB_MAXINE | |
1441 | bool "Maxine (Personal DECstation) onboard framebuffer support" | |
a9350003 | 1442 | depends on (FB = y) && MACH_DECSTATION |
1da177e4 LT |
1443 | select FB_CFB_FILLRECT |
1444 | select FB_CFB_COPYAREA | |
1445 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1446 | help |
1447 | Support for the onboard framebuffer (1024x768x8) in the Personal | |
1448 | DECstation series (Personal DECstation 5000/20, /25, /33, /50, | |
1449 | Codename "Maxine"). | |
1450 | ||
1451 | config FB_TX3912 | |
1452 | bool "TMPTX3912/PR31700 frame buffer support" | |
1453 | depends on (FB = y) && NINO | |
1454 | select FB_CFB_FILLRECT | |
1455 | select FB_CFB_COPYAREA | |
1456 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1457 | help |
1458 | The TX3912 is a Toshiba RISC processor based on the MIPS 3900 core | |
1459 | see <http://www.toshiba.com/taec/components/Generic/risc/tx3912.htm>. | |
1460 | ||
1461 | Say Y here to enable kernel support for the on-board framebuffer. | |
1462 | ||
1463 | config FB_G364 | |
b38817dd YY |
1464 | bool "G364 frame buffer support" |
1465 | depends on (FB = y) && (MIPS_MAGNUM_4000 || OLIVETTI_M700) | |
1da177e4 LT |
1466 | select FB_CFB_FILLRECT |
1467 | select FB_CFB_COPYAREA | |
1468 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1469 | help |
1470 | The G364 driver is the framebuffer used in MIPS Magnum 4000 and | |
1471 | Olivetti M700-10 systems. | |
1472 | ||
1473 | config FB_68328 | |
1474 | bool "Motorola 68328 native frame buffer support" | |
1475 | depends on FB && (M68328 || M68EZ328 || M68VZ328) | |
1476 | select FB_CFB_FILLRECT | |
1477 | select FB_CFB_COPYAREA | |
1478 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1479 | help |
1480 | Say Y here if you want to support the built-in frame buffer of | |
1481 | the Motorola 68328 CPU family. | |
1482 | ||
1483 | config FB_PXA | |
1484 | tristate "PXA LCD framebuffer support" | |
1485 | depends on FB && ARCH_PXA | |
1486 | select FB_CFB_FILLRECT | |
1487 | select FB_CFB_COPYAREA | |
1488 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1489 | ---help--- |
1490 | Frame buffer driver for the built-in LCD controller in the Intel | |
1491 | PXA2x0 processor. | |
1492 | ||
1493 | This driver is also available as a module ( = code which can be | |
1494 | inserted and removed from the running kernel whenever you want). The | |
74b4f042 | 1495 | module will be called pxafb. If you want to compile it as a module, |
1da177e4 LT |
1496 | say M here and read <file:Documentation/modules.txt>. |
1497 | ||
1498 | If unsure, say N. | |
1499 | ||
1da177e4 LT |
1500 | config FB_PXA_PARAMETERS |
1501 | bool "PXA LCD command line parameters" | |
1502 | default n | |
1503 | depends on FB_PXA | |
1504 | ---help--- | |
1505 | Enable the use of kernel command line or module parameters | |
1506 | to configure the physical properties of the LCD panel when | |
1507 | using the PXA LCD driver. | |
1508 | ||
1509 | This option allows you to override the panel parameters | |
1510 | supplied by the platform in order to support multiple | |
1511 | different models of flatpanel. If you will only be using a | |
1512 | single model of flatpanel then you can safely leave this | |
1513 | option disabled. | |
1514 | ||
1515 | <file:Documentation/fb/pxafb.txt> describes the available parameters. | |
1516 | ||
22caf042 MR |
1517 | config FB_MBX |
1518 | tristate "2700G LCD framebuffer support" | |
1519 | depends on FB && ARCH_PXA | |
1520 | select FB_CFB_FILLRECT | |
1521 | select FB_CFB_COPYAREA | |
1522 | select FB_CFB_IMAGEBLIT | |
1523 | ---help--- | |
1524 | Framebuffer driver for the Intel 2700G (Marathon) Graphics | |
1525 | Accelerator | |
1526 | ||
1527 | config FB_MBX_DEBUG | |
1528 | bool "Enable debugging info via debugfs" | |
1529 | depends on FB_MBX && DEBUG_FS | |
1530 | default n | |
1531 | ---help--- | |
1532 | Enable this if you want debugging information using the debug | |
1533 | filesystem (debugfs) | |
1534 | ||
1535 | If unsure, say N. | |
1536 | ||
ecc41d5e RD |
1537 | config FB_W100 |
1538 | tristate "W100 frame buffer support" | |
1539 | depends on FB && PXA_SHARPSL | |
1540 | select FB_CFB_FILLRECT | |
1541 | select FB_CFB_COPYAREA | |
1542 | select FB_CFB_IMAGEBLIT | |
ecc41d5e RD |
1543 | ---help--- |
1544 | Frame buffer driver for the w100 as found on the Sharp SL-Cxx series. | |
1545 | ||
1546 | This driver is also available as a module ( = code which can be | |
1547 | inserted and removed from the running kernel whenever you want). The | |
74b4f042 | 1548 | module will be called w100fb. If you want to compile it as a module, |
ecc41d5e RD |
1549 | say M here and read <file:Documentation/modules.txt>. |
1550 | ||
1551 | If unsure, say N. | |
1da177e4 | 1552 | |
20fd5767 AP |
1553 | config FB_S3C2410 |
1554 | tristate "S3C2410 LCD framebuffer support" | |
1555 | depends on FB && ARCH_S3C2410 | |
1556 | select FB_CFB_FILLRECT | |
1557 | select FB_CFB_COPYAREA | |
1558 | select FB_CFB_IMAGEBLIT | |
20fd5767 AP |
1559 | ---help--- |
1560 | Frame buffer driver for the built-in LCD controller in the Samsung | |
1561 | S3C2410 processor. | |
1562 | ||
1563 | This driver is also available as a module ( = code which can be | |
1564 | inserted and removed from the running kernel whenever you want). The | |
1565 | module will be called s3c2410fb. If you want to compile it as a module, | |
1566 | say M here and read <file:Documentation/modules.txt>. | |
1567 | ||
1568 | If unsure, say N. | |
1569 | config FB_S3C2410_DEBUG | |
1570 | bool "S3C2410 lcd debug messages" | |
1571 | depends on FB_S3C2410 | |
1572 | help | |
1573 | Turn on debugging messages. Note that you can set/unset at run time | |
1574 | through sysfs | |
1575 | ||
36c9366e VW |
1576 | config FB_PNX4008_DUM |
1577 | tristate "Display Update Module support on Philips PNX4008 board" | |
1578 | depends on FB && ARCH_PNX4008 | |
1579 | ---help--- | |
1580 | Say Y here to enable support for PNX4008 Display Update Module (DUM) | |
1581 | ||
1582 | config FB_PNX4008_DUM_RGB | |
1583 | tristate "RGB Framebuffer support on Philips PNX4008 board" | |
1584 | depends on FB_PNX4008_DUM | |
1585 | select FB_CFB_FILLRECT | |
1586 | select FB_CFB_COPYAREA | |
1587 | select FB_CFB_IMAGEBLIT | |
1588 | ---help--- | |
1589 | Say Y here to enable support for PNX4008 RGB Framebuffer | |
1590 | ||
a3d89983 PM |
1591 | config FB_IBM_GXT4500 |
1592 | tristate "Framebuffer support for IBM GXT4500P adaptor" | |
1593 | depends on PPC | |
1594 | select FB_CFB_FILLRECT | |
1595 | select FB_CFB_COPYAREA | |
1596 | select FB_CFB_IMAGEBLIT | |
1597 | ---help--- | |
1598 | Say Y here to enable support for the IBM GXT4500P display | |
1599 | adaptor, found on some IBM System P (pSeries) machines. | |
1600 | ||
1da177e4 LT |
1601 | config FB_VIRTUAL |
1602 | tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)" | |
1603 | depends on FB | |
1604 | select FB_CFB_FILLRECT | |
1605 | select FB_CFB_COPYAREA | |
1606 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1607 | ---help--- |
1608 | This is a `virtual' frame buffer device. It operates on a chunk of | |
1609 | unswappable kernel memory instead of on the memory of a graphics | |
1610 | board. This means you cannot see any output sent to this frame | |
1611 | buffer device, while it does consume precious memory. The main use | |
1612 | of this frame buffer device is testing and debugging the frame | |
1613 | buffer subsystem. Do NOT enable it for normal systems! To protect | |
1614 | the innocent, it has to be enabled explicitly at boot time using the | |
1615 | kernel option `video=vfb:'. | |
1616 | ||
1617 | To compile this driver as a module, choose M here: the | |
66cf7512 MF |
1618 | module will be called vfb. In order to load it, you must use |
1619 | the vfb_enable=1 option. | |
1da177e4 LT |
1620 | |
1621 | If unsure, say N. | |
1622 | if VT | |
1623 | source "drivers/video/console/Kconfig" | |
1624 | endif | |
1625 | ||
1626 | if FB || SGI_NEWPORT_CONSOLE | |
1627 | source "drivers/video/logo/Kconfig" | |
1628 | endif | |
1629 | ||
256154fb | 1630 | if SYSFS |
1da177e4 LT |
1631 | source "drivers/video/backlight/Kconfig" |
1632 | endif | |
1633 | ||
1634 | endmenu | |
1635 |