[mirror_ubuntu-zesty-kernel.git] / drivers / video / backlight / Kconfig

#
# Backlight & LCD drivers configuration
#

menuconfig BACKLIGHT_LCD_SUPPORT
	bool "Backlight & LCD device support"
	help
	  Enable this to be able to choose the drivers for controlling the
	  backlight and the LCD panel on some platforms, for example on PDAs.

if BACKLIGHT_LCD_SUPPORT

#
# LCD
#
config LCD_CLASS_DEVICE
        tristate "Lowlevel LCD controls"
	default m
	help
	  This framework adds support for low-level control of LCD.
	  Some framebuffer devices connect to platform-specific LCD modules
	  in order to have a platform-specific way to control the flat panel
	  (contrast and applying power to the LCD (not to the backlight!)).

	  To have support for your specific LCD panel you will have to
	  select the proper drivers which depend on this option.

if LCD_CLASS_DEVICE

config LCD_CORGI
	tristate "LCD Panel support for SHARP corgi/spitz model"
	depends on SPI_MASTER && PXA_SHARPSL
	help
	  Say y here to support the LCD panels usually found on SHARP
	  corgi (C7x0) and spitz (Cxx00) models.

config LCD_L4F00242T03
	tristate "Epson L4F00242T03 LCD"
	depends on SPI_MASTER && GENERIC_GPIO
	help
	  SPI driver for Epson L4F00242T03. This provides basic support
	  for init and powering the LCD up/down through a sysfs interface.

config LCD_LMS283GF05
	tristate "Samsung LMS283GF05 LCD"
	depends on SPI_MASTER && GENERIC_GPIO
	help
	  SPI driver for Samsung LMS283GF05. This provides basic support
	  for powering the LCD up/down through a sysfs interface.

config LCD_LTV350QV
	tristate "Samsung LTV350QV LCD Panel"
	depends on SPI_MASTER
	help
	  If you have a Samsung LTV350QV LCD panel, say y to include a
	  power control driver for it.  The panel starts up in power
	  off state, so you need this driver in order to see any
	  output.

	  The LTV350QV panel is present on all ATSTK1000 boards.

config LCD_ILI922X
	tristate "ILI Technology ILI9221/ILI9222 support"
	depends on SPI
	help
	  If you have a panel based on the ILI9221/9222 controller
	  chip then say y to include a driver for it.

config LCD_ILI9320
	tristate "ILI Technology ILI9320 controller support"
	depends on SPI
	help
	  If you have a panel based on the ILI9320 controller chip
	  then say y to include a power driver for it.

config LCD_TDO24M
	tristate "Toppoly TDO24M  and TDO35S LCD Panels support"
	depends on SPI_MASTER
	help
	  If you have a Toppoly TDO24M/TDO35S series LCD panel, say y here to
	  include the support for it.

config LCD_VGG2432A4
	tristate "VGG2432A4 LCM device support"
	depends on SPI_MASTER
	select LCD_ILI9320
	help
	  If you have a VGG2432A4 panel based on the ILI9320 controller chip
	  then say y to include a power driver for it.

config LCD_PLATFORM
	tristate "Platform LCD controls"
	help
	  This driver provides a platform-device registered LCD power
	  control interface.

config LCD_TOSA
	tristate "Sharp SL-6000 LCD Driver"
	depends on I2C && SPI && MACH_TOSA
	help
	  If you have an Sharp SL-6000 Zaurus say Y to enable a driver
	  for its LCD.

config LCD_HP700
	tristate "HP Jornada 700 series LCD Driver"
	depends on SA1100_JORNADA720_SSP && !PREEMPT
	default y
	help
	  If you have an HP Jornada 700 series handheld (710/720/728)
	  say Y to enable LCD control driver.

config LCD_S6E63M0
	tristate "S6E63M0 AMOLED LCD Driver"
	depends on SPI && BACKLIGHT_CLASS_DEVICE
	default n
	help
	  If you have an S6E63M0 LCD Panel, say Y to enable its
	  LCD control driver.

config LCD_LD9040
	tristate "LD9040 AMOLED LCD Driver"
	depends on SPI && BACKLIGHT_CLASS_DEVICE
	default n
	help
	  If you have an LD9040 Panel, say Y to enable its
	  control driver.

config LCD_AMS369FG06
	tristate "AMS369FG06 AMOLED LCD Driver"
	depends on SPI && BACKLIGHT_CLASS_DEVICE
	default n
	help
	  If you have an AMS369FG06 AMOLED Panel, say Y to enable its
	  LCD control driver.

config LCD_LMS501KF03
	tristate "LMS501KF03 LCD Driver"
	depends on SPI
	default n
	help
	  If you have an LMS501KF03 LCD Panel, say Y to enable its
	  LCD control driver.

config LCD_HX8357
	tristate "Himax HX-8357 LCD Driver"
	depends on SPI
	help
	  If you have a HX-8357 LCD panel, say Y to enable its LCD control
	  driver.

endif # LCD_CLASS_DEVICE

#
# Backlight
#
config BACKLIGHT_CLASS_DEVICE
        tristate "Lowlevel Backlight controls"
	default m
	help
	  This framework adds support for low-level control of the LCD
          backlight. This includes support for brightness and power.

	  To have support for your specific LCD panel you will have to
	  select the proper drivers which depend on this option.

if BACKLIGHT_CLASS_DEVICE

config BACKLIGHT_ATMEL_LCDC
	bool "Atmel LCDC Contrast-as-Backlight control"
	depends on FB_ATMEL
	default y if MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK
	help
	  This provides a backlight control internal to the Atmel LCDC
	  driver.  If the LCD "contrast control" on your board is wired
	  so it controls the backlight brightness, select this option to
	  export this as a PWM-based backlight control.

	  If in doubt, it's safe to enable this option; it doesn't kick
	  in unless the board's description says it's wired that way.

config BACKLIGHT_ATMEL_PWM
	tristate "Atmel PWM backlight control"
	depends on ATMEL_PWM
	help
	  Say Y here if you want to use the PWM peripheral in Atmel AT91 and
	  AVR32 devices. This driver will need additional platform data to know
	  which PWM instance to use and how to configure it.

	  To compile this driver as a module, choose M here: the module will be
	  called atmel-pwm-bl.

config BACKLIGHT_EP93XX
	tristate "Cirrus EP93xx Backlight Driver"
	depends on FB_EP93XX
	help
	  If you have a LCD backlight connected to the BRIGHT output of
	  the EP93xx, say Y here to enable this driver.

	  To compile this driver as a module, choose M here: the module will
	  be called ep93xx_bl.

config BACKLIGHT_GENERIC
	tristate "Generic (aka Sharp Corgi) Backlight Driver"
	default y
	help
	  Say y to enable the generic platform backlight driver previously
	  known as the Corgi backlight driver. If you have a Sharp Zaurus
	  SL-C7xx, SL-Cxx00 or SL-6000x say y.

config BACKLIGHT_LM3533
	tristate "Backlight Driver for LM3533"
	depends on BACKLIGHT_CLASS_DEVICE
	depends on MFD_LM3533
	help
	  Say Y to enable the backlight driver for National Semiconductor / TI
	  LM3533 Lighting Power chips.

	  The backlights can be controlled directly, through PWM input, or by
	  the ambient-light-sensor interface. The chip supports 256 brightness
	  levels.

config BACKLIGHT_LOCOMO
	tristate "Sharp LOCOMO LCD/Backlight Driver"
	depends on SHARP_LOCOMO
	default y
	help
	  If you have a Sharp Zaurus SL-5500 (Collie) or SL-5600 (Poodle) say y to
	  enable the LCD/backlight driver.

config BACKLIGHT_OMAP1
	tristate "OMAP1 PWL-based LCD Backlight"
	depends on ARCH_OMAP1
	default y
	help
	  This driver controls the LCD backlight level and power for
	  the PWL module of OMAP1 processors.  Say Y if your board
	  uses this hardware.

config BACKLIGHT_HP680
	tristate "HP Jornada 680 Backlight Driver"
	depends on SH_HP6XX
	default y
	help
	  If you have a HP Jornada 680, say y to enable the
	  backlight driver.

config BACKLIGHT_HP700
	tristate "HP Jornada 700 series Backlight Driver"
	depends on SA1100_JORNADA720_SSP && !PREEMPT
	default y
	help
	  If you have an HP Jornada 700 series,
	  say Y to include backlight control driver.

config BACKLIGHT_CARILLO_RANCH
	tristate "Intel Carillo Ranch Backlight Driver"
	depends on LCD_CLASS_DEVICE && PCI && X86 && FB_LE80578
	help
	  If you have a Intel LE80578 (Carillo Ranch) say Y to enable the
	  backlight driver.

config BACKLIGHT_PWM
	tristate "Generic PWM based Backlight Driver"
	depends on PWM
	help
	  If you have a LCD backlight adjustable by PWM, say Y to enable
	  this driver.

config BACKLIGHT_DA903X
	tristate "Backlight Driver for DA9030/DA9034 using WLED"
	depends on PMIC_DA903X
	help
	  If you have a LCD backlight connected to the WLED output of DA9030
	  or DA9034 WLED output, say Y here to enable this driver.

config BACKLIGHT_DA9052
	tristate "Dialog DA9052/DA9053 WLED"
	depends on PMIC_DA9052
	help
	  Enable the Backlight Driver for DA9052-BC and DA9053-AA/Bx PMICs.

config BACKLIGHT_MAX8925
	tristate "Backlight driver for MAX8925"
	depends on MFD_MAX8925
	help
	  If you have a LCD backlight connected to the WLED output of MAX8925
	  WLED output, say Y here to enable this driver.

config BACKLIGHT_APPLE
       tristate "Apple Backlight Driver"
       depends on X86 && ACPI
       help
         If you have an Intel-based Apple say Y to enable a driver for its
	 backlight.

config BACKLIGHT_TOSA
	tristate "Sharp SL-6000 Backlight Driver"
	depends on I2C && MACH_TOSA && LCD_TOSA
	help
	  If you have an Sharp SL-6000 Zaurus say Y to enable a driver
	  for its backlight

config BACKLIGHT_SAHARA
	tristate "Tabletkiosk Sahara Touch-iT Backlight Driver"
	depends on X86
	help
	  If you have a Tabletkiosk Sahara Touch-iT, say y to enable the
	  backlight driver.

config BACKLIGHT_WM831X
	tristate "WM831x PMIC Backlight Driver"
	depends on MFD_WM831X
	help
	  If you have a backlight driven by the ISINK and DCDC of a
	  WM831x PMIC say y to enable the backlight driver for it.

config BACKLIGHT_ADP5520
	tristate "Backlight Driver for ADP5520/ADP5501 using WLED"
	depends on PMIC_ADP5520
	help
	  If you have a LCD backlight connected to the BST/BL_SNK output of
	  ADP5520 or ADP5501, say Y here to enable this driver.

	  To compile this driver as a module, choose M here: the module will
	  be called adp5520_bl.

config BACKLIGHT_ADP8860
	tristate "Backlight Driver for ADP8860/ADP8861/ADP8863 using WLED"
	depends on BACKLIGHT_CLASS_DEVICE && I2C
	select NEW_LEDS
	select LEDS_CLASS
	help
	  If you have a LCD backlight connected to the ADP8860, ADP8861 or
	  ADP8863 say Y here to enable this driver.

	  To compile this driver as a module, choose M here: the module will
	  be called adp8860_bl.

config BACKLIGHT_ADP8870
	tristate "Backlight Driver for ADP8870 using WLED"
	depends on BACKLIGHT_CLASS_DEVICE && I2C
	select NEW_LEDS
	select LEDS_CLASS
	help
	  If you have a LCD backlight connected to the ADP8870,
	  say Y here to enable this driver.

	  To compile this driver as a module, choose M here: the module will
	  be called adp8870_bl.

config BACKLIGHT_88PM860X
	tristate "Backlight Driver for 88PM8606 using WLED"
	depends on MFD_88PM860X
	help
	  Say Y to enable the backlight driver for Marvell 88PM8606.

config BACKLIGHT_PCF50633
	tristate "Backlight driver for NXP PCF50633 MFD"
	depends on BACKLIGHT_CLASS_DEVICE && MFD_PCF50633
	help
	  If you have a backlight driven by a NXP PCF50633 MFD, say Y here to
	  enable its driver.

config BACKLIGHT_AAT2870
	tristate "AnalogicTech AAT2870 Backlight"
	depends on BACKLIGHT_CLASS_DEVICE && MFD_AAT2870_CORE
	help
	  If you have a AnalogicTech AAT2870 say Y to enable the
	  backlight driver.

config BACKLIGHT_LM3630
	tristate "Backlight Driver for LM3630"
	depends on BACKLIGHT_CLASS_DEVICE && I2C
	select REGMAP_I2C
	help
	  This supports TI LM3630 Backlight Driver

config BACKLIGHT_LM3639
	tristate "Backlight Driver for LM3639"
	depends on BACKLIGHT_CLASS_DEVICE && I2C
	select REGMAP_I2C
	select NEW_LEDS
	select LEDS_CLASS
	help
	  This supports TI LM3639 Backlight + 1.5A Flash LED Driver

config BACKLIGHT_LP855X
	tristate "Backlight driver for TI LP855X"
	depends on BACKLIGHT_CLASS_DEVICE && I2C
	help
	  This supports TI LP8550, LP8551, LP8552, LP8553, LP8556 and LP8557
	  backlight driver.

config BACKLIGHT_LP8788
	tristate "Backlight driver for TI LP8788 MFD"
	depends on BACKLIGHT_CLASS_DEVICE && MFD_LP8788
	help
	  This supports TI LP8788 backlight driver.

config BACKLIGHT_OT200
	tristate "Backlight driver for ot200 visualisation device"
	depends on BACKLIGHT_CLASS_DEVICE && CS5535_MFGPT && GPIO_CS5535
	help
	  To compile this driver as a module, choose M here: the module will be
	  called ot200_bl.

config BACKLIGHT_PANDORA
	tristate "Backlight driver for Pandora console"
	depends on TWL4030_CORE
	help
	  If you have a Pandora console, say Y to enable the
	  backlight driver.

config BACKLIGHT_TPS65217
	tristate "TPS65217 Backlight"
	depends on BACKLIGHT_CLASS_DEVICE && MFD_TPS65217
	help
	  If you have a Texas Instruments TPS65217 say Y to enable the
	  backlight driver.

config BACKLIGHT_AS3711
	tristate "AS3711 Backlight"
	depends on BACKLIGHT_CLASS_DEVICE && MFD_AS3711
	help
	  If you have an Austrian Microsystems AS3711 say Y to enable the
	  backlight driver.

endif # BACKLIGHT_CLASS_DEVICE

endif # BACKLIGHT_LCD_SUPPORT
Commit	Line	Data
1da177e4 LT	1	#
	2	# Backlight & LCD drivers configuration
	3	#
	4
	5	menuconfig BACKLIGHT_LCD_SUPPORT
	6	bool "Backlight & LCD device support"
	7	help
	8	Enable this to be able to choose the drivers for controlling the
	9	backlight and the LCD panel on some platforms, for example on PDAs.
	10
8fdd5767 HS	11	if BACKLIGHT_LCD_SUPPORT
8fdd5767 HS	12
fa9133c2 DB	13	#
	14	# LCD
	15	#
	16	config LCD_CLASS_DEVICE
	17	tristate "Lowlevel LCD controls"
1da177e4 LT	18	default m
1da177e4 LT	19	help
fa9133c2 DB	20	This framework adds support for low-level control of LCD.
	21	Some framebuffer devices connect to platform-specific LCD modules
	22	in order to have a platform-specific way to control the flat panel
	23	(contrast and applying power to the LCD (not to the backlight!)).
1da177e4 LT	24
	25	To have support for your specific LCD panel you will have to
	26	select the proper drivers which depend on this option.
	27
8fdd5767 HS	28	if LCD_CLASS_DEVICE
8fdd5767 HS	29
b18250a8 EM	30	config LCD_CORGI
b18250a8 EM	31	tristate "LCD Panel support for SHARP corgi/spitz model"
8fdd5767	32	depends on SPI_MASTER && PXA_SHARPSL
b18250a8 EM	33	help
	34	Say y here to support the LCD panels usually found on SHARP
	35	corgi (C7x0) and spitz (Cxx00) models.
	36
e7fb9c4a AP	37	config LCD_L4F00242T03
e7fb9c4a AP	38	tristate "Epson L4F00242T03 LCD"
8fdd5767	39	depends on SPI_MASTER && GENERIC_GPIO
e7fb9c4a AP	40	help
	41	SPI driver for Epson L4F00242T03. This provides basic support
	42	for init and powering the LCD up/down through a sysfs interface.
	43
5036cc41 MV	44	config LCD_LMS283GF05
5036cc41 MV	45	tristate "Samsung LMS283GF05 LCD"
8fdd5767	46	depends on SPI_MASTER && GENERIC_GPIO
5036cc41 MV	47	help
	48	SPI driver for Samsung LMS283GF05. This provides basic support
	49	for powering the LCD up/down through a sysfs interface.
	50
18f65c79 HS	51	config LCD_LTV350QV
18f65c79 HS	52	tristate "Samsung LTV350QV LCD Panel"
8fdd5767	53	depends on SPI_MASTER
18f65c79 HS	54	help
	55	If you have a Samsung LTV350QV LCD panel, say y to include a
	56	power control driver for it. The panel starts up in power
	57	off state, so you need this driver in order to see any
	58	output.
	59
	60	The LTV350QV panel is present on all ATSTK1000 boards.
	61
4cfbfa97 SB	62	config LCD_ILI922X
	63	tristate "ILI Technology ILI9221/ILI9222 support"
	64	depends on SPI
	65	help
	66	If you have a panel based on the ILI9221/9222 controller
	67	chip then say y to include a driver for it.
	68
cccb6d3c	69	config LCD_ILI9320
fd6de530 JH	70	tristate "ILI Technology ILI9320 controller support"
fd6de530 JH	71	depends on SPI
cccb6d3c BD	72	help
	73	If you have a panel based on the ILI9320 controller chip
	74	then say y to include a power driver for it.
	75
dd89ccb2	76	config LCD_TDO24M
f4f6bda0	77	tristate "Toppoly TDO24M and TDO35S LCD Panels support"
8fdd5767	78	depends on SPI_MASTER
dd89ccb2	79	help
f4f6bda0	80	If you have a Toppoly TDO24M/TDO35S series LCD panel, say y here to
dd89ccb2 EM	81	include the support for it.
dd89ccb2 EM	82
cccb6d3c BD	83	config LCD_VGG2432A4
cccb6d3c BD	84	tristate "VGG2432A4 LCM device support"
8fdd5767	85	depends on SPI_MASTER
cccb6d3c	86	select LCD_ILI9320
cccb6d3c BD	87	help
	88	If you have a VGG2432A4 panel based on the ILI9320 controller chip
	89	then say y to include a power driver for it.
	90
c25826a7 BD	91	config LCD_PLATFORM
c25826a7 BD	92	tristate "Platform LCD controls"
c25826a7 BD	93	help
	94	This driver provides a platform-device registered LCD power
	95	control interface.
	96
fbd1b17b DES	97	config LCD_TOSA
fbd1b17b DES	98	tristate "Sharp SL-6000 LCD Driver"
5fc05780	99	depends on I2C && SPI && MACH_TOSA
fbd1b17b DES	100	help
	101	If you have an Sharp SL-6000 Zaurus say Y to enable a driver
	102	for its LCD.
	103
9e124435 KE	104	config LCD_HP700
9e124435 KE	105	tristate "HP Jornada 700 series LCD Driver"
9e124435 KE	106	depends on SA1100_JORNADA720_SSP && !PREEMPT
	107	default y
	108	help
	109	If you have an HP Jornada 700 series handheld (710/720/728)
	110	say Y to enable LCD control driver.
	111
ee378a5c ID	112	config LCD_S6E63M0
	113	tristate "S6E63M0 AMOLED LCD Driver"
	114	depends on SPI && BACKLIGHT_CLASS_DEVICE
	115	default n
	116	help
	117	If you have an S6E63M0 LCD Panel, say Y to enable its
	118	LCD control driver.
	119
1baf0eb3 DL	120	config LCD_LD9040
	121	tristate "LD9040 AMOLED LCD Driver"
	122	depends on SPI && BACKLIGHT_CLASS_DEVICE
	123	default n
	124	help
	125	If you have an LD9040 Panel, say Y to enable its
	126	control driver.
	127
a4c8aaa5 JH	128	config LCD_AMS369FG06
	129	tristate "AMS369FG06 AMOLED LCD Driver"
	130	depends on SPI && BACKLIGHT_CLASS_DEVICE
	131	default n
	132	help
	133	If you have an AMS369FG06 AMOLED Panel, say Y to enable its
	134	LCD control driver.
	135
1be9ca25 JH	136	config LCD_LMS501KF03
	137	tristate "LMS501KF03 LCD Driver"
	138	depends on SPI
	139	default n
	140	help
	141	If you have an LMS501KF03 LCD Panel, say Y to enable its
	142	LCD control driver.
	143
8a6c1dd5 MR	144	config LCD_HX8357
	145	tristate "Himax HX-8357 LCD Driver"
	146	depends on SPI
	147	help
	148	If you have a HX-8357 LCD panel, say Y to enable its LCD control
	149	driver.
	150
8fdd5767 HS	151	endif # LCD_CLASS_DEVICE
8fdd5767 HS	152
fa9133c2 DB	153	#
	154	# Backlight
	155	#
	156	config BACKLIGHT_CLASS_DEVICE
	157	tristate "Lowlevel Backlight controls"
1da177e4 LT	158	default m
1da177e4 LT	159	help
fa9133c2 DB	160	This framework adds support for low-level control of the LCD
fa9133c2 DB	161	backlight. This includes support for brightness and power.
1da177e4 LT	162
	163	To have support for your specific LCD panel you will have to
	164	select the proper drivers which depend on this option.
	165
8fdd5767 HS	166	if BACKLIGHT_CLASS_DEVICE
8fdd5767 HS	167
a9a84c37 DB	168	config BACKLIGHT_ATMEL_LCDC
a9a84c37 DB	169	bool "Atmel LCDC Contrast-as-Backlight control"
8fdd5767	170	depends on FB_ATMEL
d50d1ddb	171	default y if MACH_AT91SAM9261EK \|\| MACH_AT91SAM9G10EK \|\| MACH_AT91SAM9263EK
a9a84c37 DB	172	help
	173	This provides a backlight control internal to the Atmel LCDC
	174	driver. If the LCD "contrast control" on your board is wired
	175	so it controls the backlight brightness, select this option to
	176	export this as a PWM-based backlight control.
	177
	178	If in doubt, it's safe to enable this option; it doesn't kick
	179	in unless the board's description says it's wired that way.
	180
3e074058 HCE	181	config BACKLIGHT_ATMEL_PWM
3e074058 HCE	182	tristate "Atmel PWM backlight control"
8fdd5767	183	depends on ATMEL_PWM
3e074058 HCE	184	help
	185	Say Y here if you want to use the PWM peripheral in Atmel AT91 and
	186	AVR32 devices. This driver will need additional platform data to know
	187	which PWM instance to use and how to configure it.
	188
	189	To compile this driver as a module, choose M here: the module will be
	190	called atmel-pwm-bl.
	191
08b3924b HS	192	config BACKLIGHT_EP93XX
	193	tristate "Cirrus EP93xx Backlight Driver"
	194	depends on FB_EP93XX
	195	help
	196	If you have a LCD backlight connected to the BRIGHT output of
	197	the EP93xx, say Y here to enable this driver.
	198
	199	To compile this driver as a module, choose M here: the module will
	200	be called ep93xx_bl.
	201
d00ba726 RP	202	config BACKLIGHT_GENERIC
d00ba726 RP	203	tristate "Generic (aka Sharp Corgi) Backlight Driver"
d00ba726	204	default y
1da177e4	205	help
c3f8f650 RP	206	Say y to enable the generic platform backlight driver previously
c3f8f650 RP	207	known as the Corgi backlight driver. If you have a Sharp Zaurus
d00ba726	208	SL-C7xx, SL-Cxx00 or SL-6000x say y.
45e2a9b4	209
7f26c970 JH	210	config BACKLIGHT_LM3533
	211	tristate "Backlight Driver for LM3533"
	212	depends on BACKLIGHT_CLASS_DEVICE
	213	depends on MFD_LM3533
	214	help
	215	Say Y to enable the backlight driver for National Semiconductor / TI
	216	LM3533 Lighting Power chips.
	217
	218	The backlights can be controlled directly, through PWM input, or by
	219	the ambient-light-sensor interface. The chip supports 256 brightness
	220	levels.
	221
e4423781 RP	222	config BACKLIGHT_LOCOMO
e4423781 RP	223	tristate "Sharp LOCOMO LCD/Backlight Driver"
8fdd5767	224	depends on SHARP_LOCOMO
e4423781 RP	225	default y
	226	help
	227	If you have a Sharp Zaurus SL-5500 (Collie) or SL-5600 (Poodle) say y to
	228	enable the LCD/backlight driver.
	229
ec072b0f AZ	230	config BACKLIGHT_OMAP1
ec072b0f AZ	231	tristate "OMAP1 PWL-based LCD Backlight"
8fdd5767	232	depends on ARCH_OMAP1
ec072b0f AZ	233	default y
	234	help
	235	This driver controls the LCD backlight level and power for
	236	the PWL module of OMAP1 processors. Say Y if your board
	237	uses this hardware.
	238
06c6f900 AS	239	config BACKLIGHT_HP680
06c6f900 AS	240	tristate "HP Jornada 680 Backlight Driver"
8fdd5767	241	depends on SH_HP6XX
06c6f900 AS	242	default y
	243	help
	244	If you have a HP Jornada 680, say y to enable the
	245	backlight driver.
	246
13a7b5dc KE	247	config BACKLIGHT_HP700
13a7b5dc KE	248	tristate "HP Jornada 700 series Backlight Driver"
13a7b5dc KE	249	depends on SA1100_JORNADA720_SSP && !PREEMPT
	250	default y
	251	help
	252	If you have an HP Jornada 700 series,
	253	say Y to include backlight control driver.
	254
dbe7e429 AH	255	config BACKLIGHT_CARILLO_RANCH
dbe7e429 AH	256	tristate "Intel Carillo Ranch Backlight Driver"
8fdd5767	257	depends on LCD_CLASS_DEVICE && PCI && X86 && FB_LE80578
dbe7e429 AH	258	help
	259	If you have a Intel LE80578 (Carillo Ranch) say Y to enable the
	260	backlight driver.
42796d37	261
	262	config BACKLIGHT_PWM
	263	tristate "Generic PWM based Backlight Driver"
3e3ed6cd	264	depends on PWM
42796d37	265	help
	266	If you have a LCD backlight adjustable by PWM, say Y to enable
	267	this driver.
7be35c72	268
923ae48b MR	269	config BACKLIGHT_DA903X
923ae48b MR	270	tristate "Backlight Driver for DA9030/DA9034 using WLED"
8fdd5767	271	depends on PMIC_DA903X
923ae48b MR	272	help
	273	If you have a LCD backlight connected to the WLED output of DA9030
	274	or DA9034 WLED output, say Y here to enable this driver.
	275
6ede3d83 AJ	276	config BACKLIGHT_DA9052
	277	tristate "Dialog DA9052/DA9053 WLED"
	278	depends on PMIC_DA9052
	279	help
	280	Enable the Backlight Driver for DA9052-BC and DA9053-AA/Bx PMICs.
	281
4f811ef0 HZ	282	config BACKLIGHT_MAX8925
4f811ef0 HZ	283	tristate "Backlight driver for MAX8925"
8fdd5767	284	depends on MFD_MAX8925
4f811ef0 HZ	285	help
	286	If you have a LCD backlight connected to the WLED output of MAX8925
	287	WLED output, say Y here to enable this driver.
	288
39b3dee7 MG	289	config BACKLIGHT_APPLE
39b3dee7 MG	290	tristate "Apple Backlight Driver"
b372412e	291	depends on X86 && ACPI
7be35c72	292	help
39b3dee7	293	If you have an Intel-based Apple say Y to enable a driver for its
b372412e	294	backlight.
7be35c72	295
fbd1b17b DES	296	config BACKLIGHT_TOSA
fbd1b17b DES	297	tristate "Sharp SL-6000 Backlight Driver"
8fdd5767	298	depends on I2C && MACH_TOSA && LCD_TOSA
fbd1b17b DES	299	help
	300	If you have an Sharp SL-6000 Zaurus say Y to enable a driver
	301	for its backlight
	302
d03ebb12 CN	303	config BACKLIGHT_SAHARA
d03ebb12 CN	304	tristate "Tabletkiosk Sahara Touch-iT Backlight Driver"
8fdd5767	305	depends on X86
d03ebb12 CN	306	help
	307	If you have a Tabletkiosk Sahara Touch-iT, say y to enable the
	308	backlight driver.
a4f3d55c MB	309
	310	config BACKLIGHT_WM831X
	311	tristate "WM831x PMIC Backlight Driver"
8fdd5767	312	depends on MFD_WM831X
a4f3d55c MB	313	help
	314	If you have a backlight driven by the ISINK and DCDC of a
	315	WM831x PMIC say y to enable the backlight driver for it.
3b96ea9e	316
a7998cec MH	317	config BACKLIGHT_ADP5520
a7998cec MH	318	tristate "Backlight Driver for ADP5520/ADP5501 using WLED"
8fdd5767	319	depends on PMIC_ADP5520
a7998cec MH	320	help
	321	If you have a LCD backlight connected to the BST/BL_SNK output of
	322	ADP5520 or ADP5501, say Y here to enable this driver.
	323
	324	To compile this driver as a module, choose M here: the module will
	325	be called adp5520_bl.
	326
82fd53b7	327	config BACKLIGHT_ADP8860
c7c06d8a	328	tristate "Backlight Driver for ADP8860/ADP8861/ADP8863 using WLED"
82fd53b7 MH	329	depends on BACKLIGHT_CLASS_DEVICE && I2C
	330	select NEW_LEDS
	331	select LEDS_CLASS
	332	help
c7c06d8a MH	333	If you have a LCD backlight connected to the ADP8860, ADP8861 or
c7c06d8a MH	334	ADP8863 say Y here to enable this driver.
82fd53b7 MH	335
	336	To compile this driver as a module, choose M here: the module will
	337	be called adp8860_bl.
	338
a59ec1e7 MH	339	config BACKLIGHT_ADP8870
	340	tristate "Backlight Driver for ADP8870 using WLED"
	341	depends on BACKLIGHT_CLASS_DEVICE && I2C
	342	select NEW_LEDS
	343	select LEDS_CLASS
	344	help
	345	If you have a LCD backlight connected to the ADP8870,
	346	say Y here to enable this driver.
	347
	348	To compile this driver as a module, choose M here: the module will
	349	be called adp8870_bl.
	350
d07e8bf8 HZ	351	config BACKLIGHT_88PM860X
d07e8bf8 HZ	352	tristate "Backlight Driver for 88PM8606 using WLED"
8fdd5767	353	depends on MFD_88PM860X
d07e8bf8 HZ	354	help
	355	Say Y to enable the backlight driver for Marvell 88PM8606.
	356
2ddfd12f LPC	357	config BACKLIGHT_PCF50633
	358	tristate "Backlight driver for NXP PCF50633 MFD"
	359	depends on BACKLIGHT_CLASS_DEVICE && MFD_PCF50633
	360	help
	361	If you have a backlight driven by a NXP PCF50633 MFD, say Y here to
	362	enable its driver.
	363
4b0d711b	364	config BACKLIGHT_AAT2870
70d32719	365	tristate "AnalogicTech AAT2870 Backlight"
4b0d711b JP	366	depends on BACKLIGHT_CLASS_DEVICE && MFD_AAT2870_CORE
	367	help
	368	If you have a AnalogicTech AAT2870 say Y to enable the
	369	backlight driver.
	370
0c2a665a SJ	371	config BACKLIGHT_LM3630
	372	tristate "Backlight Driver for LM3630"
	373	depends on BACKLIGHT_CLASS_DEVICE && I2C
	374	select REGMAP_I2C
	375	help
	376	This supports TI LM3630 Backlight Driver
	377
0f59858d SJ	378	config BACKLIGHT_LM3639
	379	tristate "Backlight Driver for LM3639"
	380	depends on BACKLIGHT_CLASS_DEVICE && I2C
	381	select REGMAP_I2C
	382	select NEW_LEDS
	383	select LEDS_CLASS
	384	help
	385	This supports TI LM3639 Backlight + 1.5A Flash LED Driver
	386
7be865ab KM	387	config BACKLIGHT_LP855X
	388	tristate "Backlight driver for TI LP855X"
	389	depends on BACKLIGHT_CLASS_DEVICE && I2C
	390	help
26e8ccc2	391	This supports TI LP8550, LP8551, LP8552, LP8553, LP8556 and LP8557
7be865ab KM	392	backlight driver.
7be865ab KM	393
c5a51053 KM	394	config BACKLIGHT_LP8788
	395	tristate "Backlight driver for TI LP8788 MFD"
	396	depends on BACKLIGHT_CLASS_DEVICE && MFD_LP8788
	397	help
	398	This supports TI LP8788 backlight driver.
	399
c8df7428 CG	400	config BACKLIGHT_OT200
c8df7428 CG	401	tristate "Backlight driver for ot200 visualisation device"
2df5e129	402	depends on BACKLIGHT_CLASS_DEVICE && CS5535_MFGPT && GPIO_CS5535
c8df7428 CG	403	help
	404	To compile this driver as a module, choose M here: the module will be
	405	called ot200_bl.
	406
35c1682c GI	407	config BACKLIGHT_PANDORA
	408	tristate "Backlight driver for Pandora console"
	409	depends on TWL4030_CORE
	410	help
	411	If you have a Pandora console, say Y to enable the
	412	backlight driver.
	413
eebfdc17 MK	414	config BACKLIGHT_TPS65217
	415	tristate "TPS65217 Backlight"
	416	depends on BACKLIGHT_CLASS_DEVICE && MFD_TPS65217
	417	help
	418	If you have a Texas Instruments TPS65217 say Y to enable the
	419	backlight driver.
	420
de474b5b GL	421	config BACKLIGHT_AS3711
	422	tristate "AS3711 Backlight"
	423	depends on BACKLIGHT_CLASS_DEVICE && MFD_AS3711
	424	help
	425	If you have an Austrian Microsystems AS3711 say Y to enable the
	426	backlight driver.
	427
8fdd5767 HS	428	endif # BACKLIGHT_CLASS_DEVICE
	429
	430	endif # BACKLIGHT_LCD_SUPPORT