]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * linux/drivers/video/cyber2000fb.c | |
3 | * | |
4 | * Copyright (C) 1998-2002 Russell King | |
5 | * | |
6 | * MIPS and 50xx clock support | |
7 | * Copyright (C) 2001 Bradley D. LaRonde <brad@ltc.com> | |
8 | * | |
9 | * 32 bit support, text color and panning fixes for modes != 8 bit | |
10 | * Copyright (C) 2002 Denis Oliver Kropp <dok@directfb.org> | |
11 | * | |
12 | * This program is free software; you can redistribute it and/or modify | |
13 | * it under the terms of the GNU General Public License version 2 as | |
14 | * published by the Free Software Foundation. | |
15 | * | |
16 | * Integraphics CyberPro 2000, 2010 and 5000 frame buffer device | |
17 | * | |
18 | * Based on cyberfb.c. | |
19 | * | |
20 | * Note that we now use the new fbcon fix, var and cmap scheme. We do | |
21 | * still have to check which console is the currently displayed one | |
22 | * however, especially for the colourmap stuff. | |
23 | * | |
24 | * We also use the new hotplug PCI subsystem. I'm not sure if there | |
25 | * are any such cards, but I'm erring on the side of caution. We don't | |
26 | * want to go pop just because someone does have one. | |
27 | * | |
28 | * Note that this doesn't work fully in the case of multiple CyberPro | |
29 | * cards with grabbers. We currently can only attach to the first | |
30 | * CyberPro card found. | |
31 | * | |
32 | * When we're in truecolour mode, we power down the LUT RAM as a power | |
33 | * saving feature. Also, when we enter any of the powersaving modes | |
34 | * (except soft blanking) we power down the RAMDACs. This saves about | |
35 | * 1W, which is roughly 8% of the power consumption of a NetWinder | |
36 | * (which, incidentally, is about the same saving as a 2.5in hard disk | |
37 | * entering standby mode.) | |
38 | */ | |
1da177e4 LT |
39 | #include <linux/module.h> |
40 | #include <linux/kernel.h> | |
41 | #include <linux/errno.h> | |
42 | #include <linux/string.h> | |
43 | #include <linux/mm.h> | |
1da177e4 LT |
44 | #include <linux/slab.h> |
45 | #include <linux/delay.h> | |
46 | #include <linux/fb.h> | |
47 | #include <linux/pci.h> | |
48 | #include <linux/init.h> | |
99730225 | 49 | #include <linux/io.h> |
1da177e4 | 50 | |
1da177e4 LT |
51 | #include <asm/pgtable.h> |
52 | #include <asm/system.h> | |
1da177e4 LT |
53 | |
54 | #ifdef __arm__ | |
55 | #include <asm/mach-types.h> | |
56 | #endif | |
57 | ||
58 | #include "cyber2000fb.h" | |
59 | ||
60 | struct cfb_info { | |
61 | struct fb_info fb; | |
62 | struct display_switch *dispsw; | |
63 | struct display *display; | |
64 | struct pci_dev *dev; | |
532237ef | 65 | unsigned char __iomem *region; |
1da177e4 LT |
66 | unsigned char __iomem *regs; |
67 | u_int id; | |
68 | int func_use_count; | |
69 | u_long ref_ps; | |
70 | ||
71 | /* | |
72 | * Clock divisors | |
73 | */ | |
74 | u_int divisors[4]; | |
75 | ||
76 | struct { | |
77 | u8 red, green, blue; | |
78 | } palette[NR_PALETTE]; | |
79 | ||
80 | u_char mem_ctl1; | |
81 | u_char mem_ctl2; | |
82 | u_char mclk_mult; | |
83 | u_char mclk_div; | |
84 | /* | |
85 | * RAMDAC control register is both of these or'ed together | |
86 | */ | |
87 | u_char ramdac_ctrl; | |
88 | u_char ramdac_powerdown; | |
eca02b0c RK |
89 | |
90 | u32 pseudo_palette[16]; | |
1da177e4 LT |
91 | }; |
92 | ||
93 | static char *default_font = "Acorn8x8"; | |
94 | module_param(default_font, charp, 0); | |
95 | MODULE_PARM_DESC(default_font, "Default font name"); | |
96 | ||
97 | /* | |
98 | * Our access methods. | |
99 | */ | |
532237ef KH |
100 | #define cyber2000fb_writel(val, reg, cfb) writel(val, (cfb)->regs + (reg)) |
101 | #define cyber2000fb_writew(val, reg, cfb) writew(val, (cfb)->regs + (reg)) | |
102 | #define cyber2000fb_writeb(val, reg, cfb) writeb(val, (cfb)->regs + (reg)) | |
1da177e4 | 103 | |
532237ef | 104 | #define cyber2000fb_readb(reg, cfb) readb((cfb)->regs + (reg)) |
1da177e4 LT |
105 | |
106 | static inline void | |
107 | cyber2000_crtcw(unsigned int reg, unsigned int val, struct cfb_info *cfb) | |
108 | { | |
109 | cyber2000fb_writew((reg & 255) | val << 8, 0x3d4, cfb); | |
110 | } | |
111 | ||
112 | static inline void | |
113 | cyber2000_grphw(unsigned int reg, unsigned int val, struct cfb_info *cfb) | |
114 | { | |
115 | cyber2000fb_writew((reg & 255) | val << 8, 0x3ce, cfb); | |
116 | } | |
117 | ||
118 | static inline unsigned int | |
119 | cyber2000_grphr(unsigned int reg, struct cfb_info *cfb) | |
120 | { | |
121 | cyber2000fb_writeb(reg, 0x3ce, cfb); | |
122 | return cyber2000fb_readb(0x3cf, cfb); | |
123 | } | |
124 | ||
125 | static inline void | |
126 | cyber2000_attrw(unsigned int reg, unsigned int val, struct cfb_info *cfb) | |
127 | { | |
128 | cyber2000fb_readb(0x3da, cfb); | |
129 | cyber2000fb_writeb(reg, 0x3c0, cfb); | |
130 | cyber2000fb_readb(0x3c1, cfb); | |
131 | cyber2000fb_writeb(val, 0x3c0, cfb); | |
132 | } | |
133 | ||
134 | static inline void | |
135 | cyber2000_seqw(unsigned int reg, unsigned int val, struct cfb_info *cfb) | |
136 | { | |
137 | cyber2000fb_writew((reg & 255) | val << 8, 0x3c4, cfb); | |
138 | } | |
139 | ||
140 | /* -------------------- Hardware specific routines ------------------------- */ | |
141 | ||
142 | /* | |
143 | * Hardware Cyber2000 Acceleration | |
144 | */ | |
145 | static void | |
146 | cyber2000fb_fillrect(struct fb_info *info, const struct fb_fillrect *rect) | |
147 | { | |
148 | struct cfb_info *cfb = (struct cfb_info *)info; | |
149 | unsigned long dst, col; | |
150 | ||
151 | if (!(cfb->fb.var.accel_flags & FB_ACCELF_TEXT)) { | |
152 | cfb_fillrect(info, rect); | |
153 | return; | |
154 | } | |
155 | ||
156 | cyber2000fb_writeb(0, CO_REG_CONTROL, cfb); | |
157 | cyber2000fb_writew(rect->width - 1, CO_REG_PIXWIDTH, cfb); | |
158 | cyber2000fb_writew(rect->height - 1, CO_REG_PIXHEIGHT, cfb); | |
159 | ||
160 | col = rect->color; | |
161 | if (cfb->fb.var.bits_per_pixel > 8) | |
162 | col = ((u32 *)cfb->fb.pseudo_palette)[col]; | |
163 | cyber2000fb_writel(col, CO_REG_FGCOLOUR, cfb); | |
164 | ||
165 | dst = rect->dx + rect->dy * cfb->fb.var.xres_virtual; | |
166 | if (cfb->fb.var.bits_per_pixel == 24) { | |
167 | cyber2000fb_writeb(dst, CO_REG_X_PHASE, cfb); | |
168 | dst *= 3; | |
169 | } | |
170 | ||
171 | cyber2000fb_writel(dst, CO_REG_DEST_PTR, cfb); | |
172 | cyber2000fb_writeb(CO_FG_MIX_SRC, CO_REG_FGMIX, cfb); | |
173 | cyber2000fb_writew(CO_CMD_L_PATTERN_FGCOL, CO_REG_CMD_L, cfb); | |
174 | cyber2000fb_writew(CO_CMD_H_BLITTER, CO_REG_CMD_H, cfb); | |
175 | } | |
176 | ||
177 | static void | |
178 | cyber2000fb_copyarea(struct fb_info *info, const struct fb_copyarea *region) | |
179 | { | |
180 | struct cfb_info *cfb = (struct cfb_info *)info; | |
181 | unsigned int cmd = CO_CMD_L_PATTERN_FGCOL; | |
182 | unsigned long src, dst; | |
183 | ||
184 | if (!(cfb->fb.var.accel_flags & FB_ACCELF_TEXT)) { | |
185 | cfb_copyarea(info, region); | |
186 | return; | |
187 | } | |
188 | ||
189 | cyber2000fb_writeb(0, CO_REG_CONTROL, cfb); | |
190 | cyber2000fb_writew(region->width - 1, CO_REG_PIXWIDTH, cfb); | |
191 | cyber2000fb_writew(region->height - 1, CO_REG_PIXHEIGHT, cfb); | |
192 | ||
193 | src = region->sx + region->sy * cfb->fb.var.xres_virtual; | |
194 | dst = region->dx + region->dy * cfb->fb.var.xres_virtual; | |
195 | ||
196 | if (region->sx < region->dx) { | |
197 | src += region->width - 1; | |
198 | dst += region->width - 1; | |
199 | cmd |= CO_CMD_L_INC_LEFT; | |
200 | } | |
201 | ||
202 | if (region->sy < region->dy) { | |
203 | src += (region->height - 1) * cfb->fb.var.xres_virtual; | |
204 | dst += (region->height - 1) * cfb->fb.var.xres_virtual; | |
205 | cmd |= CO_CMD_L_INC_UP; | |
206 | } | |
207 | ||
208 | if (cfb->fb.var.bits_per_pixel == 24) { | |
209 | cyber2000fb_writeb(dst, CO_REG_X_PHASE, cfb); | |
210 | src *= 3; | |
211 | dst *= 3; | |
212 | } | |
213 | cyber2000fb_writel(src, CO_REG_SRC1_PTR, cfb); | |
214 | cyber2000fb_writel(dst, CO_REG_DEST_PTR, cfb); | |
215 | cyber2000fb_writew(CO_FG_MIX_SRC, CO_REG_FGMIX, cfb); | |
216 | cyber2000fb_writew(cmd, CO_REG_CMD_L, cfb); | |
217 | cyber2000fb_writew(CO_CMD_H_FGSRCMAP | CO_CMD_H_BLITTER, | |
218 | CO_REG_CMD_H, cfb); | |
219 | } | |
220 | ||
221 | static void | |
222 | cyber2000fb_imageblit(struct fb_info *info, const struct fb_image *image) | |
223 | { | |
532237ef KH |
224 | cfb_imageblit(info, image); |
225 | return; | |
1da177e4 LT |
226 | } |
227 | ||
228 | static int cyber2000fb_sync(struct fb_info *info) | |
229 | { | |
230 | struct cfb_info *cfb = (struct cfb_info *)info; | |
231 | int count = 100000; | |
232 | ||
233 | if (!(cfb->fb.var.accel_flags & FB_ACCELF_TEXT)) | |
234 | return 0; | |
235 | ||
236 | while (cyber2000fb_readb(CO_REG_CONTROL, cfb) & CO_CTRL_BUSY) { | |
237 | if (!count--) { | |
238 | debug_printf("accel_wait timed out\n"); | |
239 | cyber2000fb_writeb(0, CO_REG_CONTROL, cfb); | |
240 | break; | |
241 | } | |
242 | udelay(1); | |
243 | } | |
244 | return 0; | |
245 | } | |
246 | ||
247 | /* | |
248 | * =========================================================================== | |
249 | */ | |
250 | ||
251 | static inline u32 convert_bitfield(u_int val, struct fb_bitfield *bf) | |
252 | { | |
253 | u_int mask = (1 << bf->length) - 1; | |
254 | ||
255 | return (val >> (16 - bf->length) & mask) << bf->offset; | |
256 | } | |
257 | ||
258 | /* | |
259 | * Set a single color register. Return != 0 for invalid regno. | |
260 | */ | |
261 | static int | |
262 | cyber2000fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, | |
263 | u_int transp, struct fb_info *info) | |
264 | { | |
265 | struct cfb_info *cfb = (struct cfb_info *)info; | |
266 | struct fb_var_screeninfo *var = &cfb->fb.var; | |
267 | u32 pseudo_val; | |
268 | int ret = 1; | |
269 | ||
270 | switch (cfb->fb.fix.visual) { | |
271 | default: | |
272 | return 1; | |
273 | ||
274 | /* | |
275 | * Pseudocolour: | |
532237ef | 276 | * 8 8 |
1da177e4 | 277 | * pixel --/--+--/--> red lut --> red dac |
532237ef KH |
278 | * | 8 |
279 | * +--/--> green lut --> green dac | |
280 | * | 8 | |
281 | * +--/--> blue lut --> blue dac | |
1da177e4 LT |
282 | */ |
283 | case FB_VISUAL_PSEUDOCOLOR: | |
284 | if (regno >= NR_PALETTE) | |
285 | return 1; | |
286 | ||
287 | red >>= 8; | |
288 | green >>= 8; | |
289 | blue >>= 8; | |
290 | ||
532237ef | 291 | cfb->palette[regno].red = red; |
1da177e4 | 292 | cfb->palette[regno].green = green; |
532237ef | 293 | cfb->palette[regno].blue = blue; |
1da177e4 LT |
294 | |
295 | cyber2000fb_writeb(regno, 0x3c8, cfb); | |
296 | cyber2000fb_writeb(red, 0x3c9, cfb); | |
297 | cyber2000fb_writeb(green, 0x3c9, cfb); | |
298 | cyber2000fb_writeb(blue, 0x3c9, cfb); | |
299 | return 0; | |
300 | ||
301 | /* | |
302 | * Direct colour: | |
532237ef KH |
303 | * n rl |
304 | * pixel --/--+--/--> red lut --> red dac | |
305 | * | gl | |
306 | * +--/--> green lut --> green dac | |
307 | * | bl | |
308 | * +--/--> blue lut --> blue dac | |
1da177e4 LT |
309 | * n = bpp, rl = red length, gl = green length, bl = blue length |
310 | */ | |
311 | case FB_VISUAL_DIRECTCOLOR: | |
312 | red >>= 8; | |
313 | green >>= 8; | |
314 | blue >>= 8; | |
315 | ||
316 | if (var->green.length == 6 && regno < 64) { | |
317 | cfb->palette[regno << 2].green = green; | |
318 | ||
319 | /* | |
320 | * The 6 bits of the green component are applied | |
321 | * to the high 6 bits of the LUT. | |
322 | */ | |
323 | cyber2000fb_writeb(regno << 2, 0x3c8, cfb); | |
532237ef KH |
324 | cyber2000fb_writeb(cfb->palette[regno >> 1].red, |
325 | 0x3c9, cfb); | |
1da177e4 | 326 | cyber2000fb_writeb(green, 0x3c9, cfb); |
532237ef KH |
327 | cyber2000fb_writeb(cfb->palette[regno >> 1].blue, |
328 | 0x3c9, cfb); | |
1da177e4 LT |
329 | |
330 | green = cfb->palette[regno << 3].green; | |
331 | ||
332 | ret = 0; | |
333 | } | |
334 | ||
335 | if (var->green.length >= 5 && regno < 32) { | |
532237ef | 336 | cfb->palette[regno << 3].red = red; |
1da177e4 | 337 | cfb->palette[regno << 3].green = green; |
532237ef | 338 | cfb->palette[regno << 3].blue = blue; |
1da177e4 LT |
339 | |
340 | /* | |
341 | * The 5 bits of each colour component are | |
342 | * applied to the high 5 bits of the LUT. | |
343 | */ | |
344 | cyber2000fb_writeb(regno << 3, 0x3c8, cfb); | |
345 | cyber2000fb_writeb(red, 0x3c9, cfb); | |
346 | cyber2000fb_writeb(green, 0x3c9, cfb); | |
347 | cyber2000fb_writeb(blue, 0x3c9, cfb); | |
348 | ret = 0; | |
349 | } | |
350 | ||
351 | if (var->green.length == 4 && regno < 16) { | |
532237ef | 352 | cfb->palette[regno << 4].red = red; |
1da177e4 | 353 | cfb->palette[regno << 4].green = green; |
532237ef | 354 | cfb->palette[regno << 4].blue = blue; |
1da177e4 LT |
355 | |
356 | /* | |
357 | * The 5 bits of each colour component are | |
358 | * applied to the high 5 bits of the LUT. | |
359 | */ | |
360 | cyber2000fb_writeb(regno << 4, 0x3c8, cfb); | |
361 | cyber2000fb_writeb(red, 0x3c9, cfb); | |
362 | cyber2000fb_writeb(green, 0x3c9, cfb); | |
363 | cyber2000fb_writeb(blue, 0x3c9, cfb); | |
364 | ret = 0; | |
365 | } | |
366 | ||
367 | /* | |
368 | * Since this is only used for the first 16 colours, we | |
369 | * don't have to care about overflowing for regno >= 32 | |
370 | */ | |
371 | pseudo_val = regno << var->red.offset | | |
372 | regno << var->green.offset | | |
373 | regno << var->blue.offset; | |
374 | break; | |
375 | ||
376 | /* | |
377 | * True colour: | |
532237ef KH |
378 | * n rl |
379 | * pixel --/--+--/--> red dac | |
380 | * | gl | |
381 | * +--/--> green dac | |
382 | * | bl | |
383 | * +--/--> blue dac | |
1da177e4 LT |
384 | * n = bpp, rl = red length, gl = green length, bl = blue length |
385 | */ | |
386 | case FB_VISUAL_TRUECOLOR: | |
387 | pseudo_val = convert_bitfield(transp ^ 0xffff, &var->transp); | |
388 | pseudo_val |= convert_bitfield(red, &var->red); | |
389 | pseudo_val |= convert_bitfield(green, &var->green); | |
390 | pseudo_val |= convert_bitfield(blue, &var->blue); | |
e76df4d3 | 391 | ret = 0; |
1da177e4 LT |
392 | break; |
393 | } | |
394 | ||
395 | /* | |
396 | * Now set our pseudo palette for the CFB16/24/32 drivers. | |
397 | */ | |
398 | if (regno < 16) | |
399 | ((u32 *)cfb->fb.pseudo_palette)[regno] = pseudo_val; | |
400 | ||
401 | return ret; | |
402 | } | |
403 | ||
404 | struct par_info { | |
405 | /* | |
406 | * Hardware | |
407 | */ | |
408 | u_char clock_mult; | |
409 | u_char clock_div; | |
410 | u_char extseqmisc; | |
411 | u_char co_pixfmt; | |
412 | u_char crtc_ofl; | |
413 | u_char crtc[19]; | |
414 | u_int width; | |
415 | u_int pitch; | |
416 | u_int fetch; | |
417 | ||
418 | /* | |
419 | * Other | |
420 | */ | |
421 | u_char ramdac; | |
422 | }; | |
423 | ||
424 | static const u_char crtc_idx[] = { | |
425 | 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, | |
426 | 0x08, 0x09, | |
427 | 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, 0x18 | |
428 | }; | |
429 | ||
430 | static void cyber2000fb_write_ramdac_ctrl(struct cfb_info *cfb) | |
431 | { | |
432 | unsigned int i; | |
433 | unsigned int val = cfb->ramdac_ctrl | cfb->ramdac_powerdown; | |
434 | ||
435 | cyber2000fb_writeb(0x56, 0x3ce, cfb); | |
436 | i = cyber2000fb_readb(0x3cf, cfb); | |
437 | cyber2000fb_writeb(i | 4, 0x3cf, cfb); | |
438 | cyber2000fb_writeb(val, 0x3c6, cfb); | |
439 | cyber2000fb_writeb(i, 0x3cf, cfb); | |
00b4703f OZ |
440 | /* prevent card lock-up observed on x86 with CyberPro 2000 */ |
441 | cyber2000fb_readb(0x3cf, cfb); | |
1da177e4 LT |
442 | } |
443 | ||
444 | static void cyber2000fb_set_timing(struct cfb_info *cfb, struct par_info *hw) | |
445 | { | |
446 | u_int i; | |
447 | ||
448 | /* | |
449 | * Blank palette | |
450 | */ | |
451 | for (i = 0; i < NR_PALETTE; i++) { | |
452 | cyber2000fb_writeb(i, 0x3c8, cfb); | |
453 | cyber2000fb_writeb(0, 0x3c9, cfb); | |
454 | cyber2000fb_writeb(0, 0x3c9, cfb); | |
455 | cyber2000fb_writeb(0, 0x3c9, cfb); | |
456 | } | |
457 | ||
458 | cyber2000fb_writeb(0xef, 0x3c2, cfb); | |
459 | cyber2000_crtcw(0x11, 0x0b, cfb); | |
460 | cyber2000_attrw(0x11, 0x00, cfb); | |
461 | ||
462 | cyber2000_seqw(0x00, 0x01, cfb); | |
463 | cyber2000_seqw(0x01, 0x01, cfb); | |
464 | cyber2000_seqw(0x02, 0x0f, cfb); | |
465 | cyber2000_seqw(0x03, 0x00, cfb); | |
466 | cyber2000_seqw(0x04, 0x0e, cfb); | |
467 | cyber2000_seqw(0x00, 0x03, cfb); | |
468 | ||
469 | for (i = 0; i < sizeof(crtc_idx); i++) | |
470 | cyber2000_crtcw(crtc_idx[i], hw->crtc[i], cfb); | |
471 | ||
472 | for (i = 0x0a; i < 0x10; i++) | |
473 | cyber2000_crtcw(i, 0, cfb); | |
474 | ||
475 | cyber2000_grphw(EXT_CRT_VRTOFL, hw->crtc_ofl, cfb); | |
476 | cyber2000_grphw(0x00, 0x00, cfb); | |
477 | cyber2000_grphw(0x01, 0x00, cfb); | |
478 | cyber2000_grphw(0x02, 0x00, cfb); | |
479 | cyber2000_grphw(0x03, 0x00, cfb); | |
480 | cyber2000_grphw(0x04, 0x00, cfb); | |
481 | cyber2000_grphw(0x05, 0x60, cfb); | |
482 | cyber2000_grphw(0x06, 0x05, cfb); | |
483 | cyber2000_grphw(0x07, 0x0f, cfb); | |
484 | cyber2000_grphw(0x08, 0xff, cfb); | |
485 | ||
486 | /* Attribute controller registers */ | |
487 | for (i = 0; i < 16; i++) | |
488 | cyber2000_attrw(i, i, cfb); | |
489 | ||
490 | cyber2000_attrw(0x10, 0x01, cfb); | |
491 | cyber2000_attrw(0x11, 0x00, cfb); | |
492 | cyber2000_attrw(0x12, 0x0f, cfb); | |
493 | cyber2000_attrw(0x13, 0x00, cfb); | |
494 | cyber2000_attrw(0x14, 0x00, cfb); | |
495 | ||
496 | /* PLL registers */ | |
497 | cyber2000_grphw(EXT_DCLK_MULT, hw->clock_mult, cfb); | |
532237ef | 498 | cyber2000_grphw(EXT_DCLK_DIV, hw->clock_div, cfb); |
1da177e4 | 499 | cyber2000_grphw(EXT_MCLK_MULT, cfb->mclk_mult, cfb); |
532237ef | 500 | cyber2000_grphw(EXT_MCLK_DIV, cfb->mclk_div, cfb); |
1da177e4 LT |
501 | cyber2000_grphw(0x90, 0x01, cfb); |
502 | cyber2000_grphw(0xb9, 0x80, cfb); | |
503 | cyber2000_grphw(0xb9, 0x00, cfb); | |
504 | ||
505 | cfb->ramdac_ctrl = hw->ramdac; | |
506 | cyber2000fb_write_ramdac_ctrl(cfb); | |
507 | ||
508 | cyber2000fb_writeb(0x20, 0x3c0, cfb); | |
509 | cyber2000fb_writeb(0xff, 0x3c6, cfb); | |
510 | ||
511 | cyber2000_grphw(0x14, hw->fetch, cfb); | |
512 | cyber2000_grphw(0x15, ((hw->fetch >> 8) & 0x03) | | |
513 | ((hw->pitch >> 4) & 0x30), cfb); | |
514 | cyber2000_grphw(EXT_SEQ_MISC, hw->extseqmisc, cfb); | |
515 | ||
516 | /* | |
517 | * Set up accelerator registers | |
518 | */ | |
532237ef KH |
519 | cyber2000fb_writew(hw->width, CO_REG_SRC_WIDTH, cfb); |
520 | cyber2000fb_writew(hw->width, CO_REG_DEST_WIDTH, cfb); | |
1da177e4 LT |
521 | cyber2000fb_writeb(hw->co_pixfmt, CO_REG_PIXFMT, cfb); |
522 | } | |
523 | ||
524 | static inline int | |
525 | cyber2000fb_update_start(struct cfb_info *cfb, struct fb_var_screeninfo *var) | |
526 | { | |
527 | u_int base = var->yoffset * var->xres_virtual + var->xoffset; | |
528 | ||
529 | base *= var->bits_per_pixel; | |
530 | ||
531 | /* | |
532 | * Convert to bytes and shift two extra bits because DAC | |
533 | * can only start on 4 byte aligned data. | |
534 | */ | |
535 | base >>= 5; | |
536 | ||
537 | if (base >= 1 << 20) | |
538 | return -EINVAL; | |
539 | ||
540 | cyber2000_grphw(0x10, base >> 16 | 0x10, cfb); | |
541 | cyber2000_crtcw(0x0c, base >> 8, cfb); | |
542 | cyber2000_crtcw(0x0d, base, cfb); | |
543 | ||
544 | return 0; | |
545 | } | |
546 | ||
547 | static int | |
548 | cyber2000fb_decode_crtc(struct par_info *hw, struct cfb_info *cfb, | |
549 | struct fb_var_screeninfo *var) | |
550 | { | |
551 | u_int Htotal, Hblankend, Hsyncend; | |
552 | u_int Vtotal, Vdispend, Vblankstart, Vblankend, Vsyncstart, Vsyncend; | |
532237ef | 553 | #define ENCODE_BIT(v, b1, m, b2) ((((v) >> (b1)) & (m)) << (b2)) |
1da177e4 LT |
554 | |
555 | hw->crtc[13] = hw->pitch; | |
556 | hw->crtc[17] = 0xe3; | |
557 | hw->crtc[14] = 0; | |
558 | hw->crtc[8] = 0; | |
559 | ||
532237ef KH |
560 | Htotal = var->xres + var->right_margin + |
561 | var->hsync_len + var->left_margin; | |
1da177e4 LT |
562 | |
563 | if (Htotal > 2080) | |
564 | return -EINVAL; | |
565 | ||
566 | hw->crtc[0] = (Htotal >> 3) - 5; | |
567 | hw->crtc[1] = (var->xres >> 3) - 1; | |
568 | hw->crtc[2] = var->xres >> 3; | |
569 | hw->crtc[4] = (var->xres + var->right_margin) >> 3; | |
570 | ||
532237ef | 571 | Hblankend = (Htotal - 4 * 8) >> 3; |
1da177e4 | 572 | |
87d06131 JS |
573 | hw->crtc[3] = ENCODE_BIT(Hblankend, 0, 0x1f, 0) | |
574 | ENCODE_BIT(1, 0, 0x01, 7); | |
1da177e4 LT |
575 | |
576 | Hsyncend = (var->xres + var->right_margin + var->hsync_len) >> 3; | |
577 | ||
87d06131 JS |
578 | hw->crtc[5] = ENCODE_BIT(Hsyncend, 0, 0x1f, 0) | |
579 | ENCODE_BIT(Hblankend, 5, 0x01, 7); | |
1da177e4 LT |
580 | |
581 | Vdispend = var->yres - 1; | |
582 | Vsyncstart = var->yres + var->lower_margin; | |
583 | Vsyncend = var->yres + var->lower_margin + var->vsync_len; | |
584 | Vtotal = var->yres + var->lower_margin + var->vsync_len + | |
585 | var->upper_margin - 2; | |
586 | ||
587 | if (Vtotal > 2047) | |
588 | return -EINVAL; | |
589 | ||
590 | Vblankstart = var->yres + 6; | |
591 | Vblankend = Vtotal - 10; | |
592 | ||
593 | hw->crtc[6] = Vtotal; | |
87d06131 JS |
594 | hw->crtc[7] = ENCODE_BIT(Vtotal, 8, 0x01, 0) | |
595 | ENCODE_BIT(Vdispend, 8, 0x01, 1) | | |
596 | ENCODE_BIT(Vsyncstart, 8, 0x01, 2) | | |
532237ef | 597 | ENCODE_BIT(Vblankstart, 8, 0x01, 3) | |
87d06131 | 598 | ENCODE_BIT(1, 0, 0x01, 4) | |
532237ef | 599 | ENCODE_BIT(Vtotal, 9, 0x01, 5) | |
87d06131 JS |
600 | ENCODE_BIT(Vdispend, 9, 0x01, 6) | |
601 | ENCODE_BIT(Vsyncstart, 9, 0x01, 7); | |
602 | hw->crtc[9] = ENCODE_BIT(0, 0, 0x1f, 0) | | |
532237ef | 603 | ENCODE_BIT(Vblankstart, 9, 0x01, 5) | |
87d06131 | 604 | ENCODE_BIT(1, 0, 0x01, 6); |
1da177e4 | 605 | hw->crtc[10] = Vsyncstart; |
87d06131 JS |
606 | hw->crtc[11] = ENCODE_BIT(Vsyncend, 0, 0x0f, 0) | |
607 | ENCODE_BIT(1, 0, 0x01, 7); | |
1da177e4 LT |
608 | hw->crtc[12] = Vdispend; |
609 | hw->crtc[15] = Vblankstart; | |
610 | hw->crtc[16] = Vblankend; | |
611 | hw->crtc[18] = 0xff; | |
612 | ||
613 | /* | |
614 | * overflow - graphics reg 0x11 | |
615 | * 0=VTOTAL:10 1=VDEND:10 2=VRSTART:10 3=VBSTART:10 | |
616 | * 4=LINECOMP:10 5-IVIDEO 6=FIXCNT | |
617 | */ | |
618 | hw->crtc_ofl = | |
532237ef KH |
619 | ENCODE_BIT(Vtotal, 10, 0x01, 0) | |
620 | ENCODE_BIT(Vdispend, 10, 0x01, 1) | | |
621 | ENCODE_BIT(Vsyncstart, 10, 0x01, 2) | | |
622 | ENCODE_BIT(Vblankstart, 10, 0x01, 3) | | |
1da177e4 LT |
623 | EXT_CRT_VRTOFL_LINECOMP10; |
624 | ||
625 | /* woody: set the interlaced bit... */ | |
626 | /* FIXME: what about doublescan? */ | |
627 | if ((var->vmode & FB_VMODE_MASK) == FB_VMODE_INTERLACED) | |
628 | hw->crtc_ofl |= EXT_CRT_VRTOFL_INTERLACE; | |
629 | ||
630 | return 0; | |
631 | } | |
632 | ||
633 | /* | |
634 | * The following was discovered by a good monitor, bit twiddling, theorising | |
635 | * and but mostly luck. Strangely, it looks like everyone elses' PLL! | |
636 | * | |
637 | * Clock registers: | |
638 | * fclock = fpll / div2 | |
639 | * fpll = fref * mult / div1 | |
640 | * where: | |
641 | * fref = 14.318MHz (69842ps) | |
642 | * mult = reg0xb0.7:0 | |
643 | * div1 = (reg0xb1.5:0 + 1) | |
644 | * div2 = 2^(reg0xb1.7:6) | |
645 | * fpll should be between 115 and 260 MHz | |
646 | * (8696ps and 3846ps) | |
647 | */ | |
648 | static int | |
649 | cyber2000fb_decode_clock(struct par_info *hw, struct cfb_info *cfb, | |
650 | struct fb_var_screeninfo *var) | |
651 | { | |
652 | u_long pll_ps = var->pixclock; | |
653 | const u_long ref_ps = cfb->ref_ps; | |
654 | u_int div2, t_div1, best_div1, best_mult; | |
655 | int best_diff; | |
656 | int vco; | |
657 | ||
658 | /* | |
659 | * Step 1: | |
660 | * find div2 such that 115MHz < fpll < 260MHz | |
661 | * and 0 <= div2 < 4 | |
662 | */ | |
663 | for (div2 = 0; div2 < 4; div2++) { | |
664 | u_long new_pll; | |
665 | ||
666 | new_pll = pll_ps / cfb->divisors[div2]; | |
667 | if (8696 > new_pll && new_pll > 3846) { | |
668 | pll_ps = new_pll; | |
669 | break; | |
670 | } | |
671 | } | |
672 | ||
673 | if (div2 == 4) | |
674 | return -EINVAL; | |
675 | ||
676 | /* | |
677 | * Step 2: | |
678 | * Given pll_ps and ref_ps, find: | |
679 | * pll_ps * 0.995 < pll_ps_calc < pll_ps * 1.005 | |
680 | * where { 1 < best_div1 < 32, 1 < best_mult < 256 } | |
681 | * pll_ps_calc = best_div1 / (ref_ps * best_mult) | |
682 | */ | |
683 | best_diff = 0x7fffffff; | |
684 | best_mult = 32; | |
685 | best_div1 = 255; | |
686 | for (t_div1 = 32; t_div1 > 1; t_div1 -= 1) { | |
687 | u_int rr, t_mult, t_pll_ps; | |
688 | int diff; | |
689 | ||
690 | /* | |
691 | * Find the multiplier for this divisor | |
692 | */ | |
693 | rr = ref_ps * t_div1; | |
694 | t_mult = (rr + pll_ps / 2) / pll_ps; | |
695 | ||
696 | /* | |
697 | * Is the multiplier within the correct range? | |
698 | */ | |
699 | if (t_mult > 256 || t_mult < 2) | |
700 | continue; | |
701 | ||
702 | /* | |
703 | * Calculate the actual clock period from this multiplier | |
704 | * and divisor, and estimate the error. | |
705 | */ | |
706 | t_pll_ps = (rr + t_mult / 2) / t_mult; | |
707 | diff = pll_ps - t_pll_ps; | |
708 | if (diff < 0) | |
709 | diff = -diff; | |
710 | ||
711 | if (diff < best_diff) { | |
712 | best_diff = diff; | |
713 | best_mult = t_mult; | |
714 | best_div1 = t_div1; | |
715 | } | |
716 | ||
717 | /* | |
718 | * If we hit an exact value, there is no point in continuing. | |
719 | */ | |
720 | if (diff == 0) | |
721 | break; | |
722 | } | |
723 | ||
724 | /* | |
725 | * Step 3: | |
726 | * combine values | |
727 | */ | |
728 | hw->clock_mult = best_mult - 1; | |
729 | hw->clock_div = div2 << 6 | (best_div1 - 1); | |
730 | ||
731 | vco = ref_ps * best_div1 / best_mult; | |
732 | if ((ref_ps == 40690) && (vco < 5556)) | |
733 | /* Set VFSEL when VCO > 180MHz (5.556 ps). */ | |
734 | hw->clock_div |= EXT_DCLK_DIV_VFSEL; | |
735 | ||
736 | return 0; | |
737 | } | |
738 | ||
739 | /* | |
740 | * Set the User Defined Part of the Display | |
741 | */ | |
742 | static int | |
743 | cyber2000fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) | |
744 | { | |
745 | struct cfb_info *cfb = (struct cfb_info *)info; | |
746 | struct par_info hw; | |
747 | unsigned int mem; | |
748 | int err; | |
749 | ||
750 | var->transp.msb_right = 0; | |
751 | var->red.msb_right = 0; | |
752 | var->green.msb_right = 0; | |
753 | var->blue.msb_right = 0; | |
532237ef KH |
754 | var->transp.offset = 0; |
755 | var->transp.length = 0; | |
1da177e4 LT |
756 | |
757 | switch (var->bits_per_pixel) { | |
758 | case 8: /* PSEUDOCOLOUR, 256 */ | |
1da177e4 LT |
759 | var->red.offset = 0; |
760 | var->red.length = 8; | |
761 | var->green.offset = 0; | |
762 | var->green.length = 8; | |
763 | var->blue.offset = 0; | |
764 | var->blue.length = 8; | |
765 | break; | |
766 | ||
767 | case 16:/* DIRECTCOLOUR, 64k or 32k */ | |
768 | switch (var->green.length) { | |
769 | case 6: /* RGB565, 64k */ | |
1da177e4 LT |
770 | var->red.offset = 11; |
771 | var->red.length = 5; | |
772 | var->green.offset = 5; | |
773 | var->green.length = 6; | |
774 | var->blue.offset = 0; | |
775 | var->blue.length = 5; | |
776 | break; | |
777 | ||
778 | default: | |
779 | case 5: /* RGB555, 32k */ | |
1da177e4 LT |
780 | var->red.offset = 10; |
781 | var->red.length = 5; | |
782 | var->green.offset = 5; | |
783 | var->green.length = 5; | |
784 | var->blue.offset = 0; | |
785 | var->blue.length = 5; | |
786 | break; | |
787 | ||
788 | case 4: /* RGB444, 4k + transparency? */ | |
789 | var->transp.offset = 12; | |
790 | var->transp.length = 4; | |
791 | var->red.offset = 8; | |
792 | var->red.length = 4; | |
793 | var->green.offset = 4; | |
794 | var->green.length = 4; | |
795 | var->blue.offset = 0; | |
796 | var->blue.length = 4; | |
797 | break; | |
798 | } | |
799 | break; | |
800 | ||
801 | case 24:/* TRUECOLOUR, 16m */ | |
1da177e4 LT |
802 | var->red.offset = 16; |
803 | var->red.length = 8; | |
804 | var->green.offset = 8; | |
805 | var->green.length = 8; | |
806 | var->blue.offset = 0; | |
807 | var->blue.length = 8; | |
808 | break; | |
809 | ||
810 | case 32:/* TRUECOLOUR, 16m */ | |
811 | var->transp.offset = 24; | |
812 | var->transp.length = 8; | |
813 | var->red.offset = 16; | |
814 | var->red.length = 8; | |
815 | var->green.offset = 8; | |
816 | var->green.length = 8; | |
817 | var->blue.offset = 0; | |
818 | var->blue.length = 8; | |
819 | break; | |
820 | ||
821 | default: | |
822 | return -EINVAL; | |
823 | } | |
824 | ||
825 | mem = var->xres_virtual * var->yres_virtual * (var->bits_per_pixel / 8); | |
826 | if (mem > cfb->fb.fix.smem_len) | |
827 | var->yres_virtual = cfb->fb.fix.smem_len * 8 / | |
532237ef | 828 | (var->bits_per_pixel * var->xres_virtual); |
1da177e4 LT |
829 | |
830 | if (var->yres > var->yres_virtual) | |
831 | var->yres = var->yres_virtual; | |
832 | if (var->xres > var->xres_virtual) | |
833 | var->xres = var->xres_virtual; | |
834 | ||
835 | err = cyber2000fb_decode_clock(&hw, cfb, var); | |
836 | if (err) | |
837 | return err; | |
838 | ||
839 | err = cyber2000fb_decode_crtc(&hw, cfb, var); | |
840 | if (err) | |
841 | return err; | |
842 | ||
843 | return 0; | |
844 | } | |
845 | ||
846 | static int cyber2000fb_set_par(struct fb_info *info) | |
847 | { | |
848 | struct cfb_info *cfb = (struct cfb_info *)info; | |
849 | struct fb_var_screeninfo *var = &cfb->fb.var; | |
850 | struct par_info hw; | |
851 | unsigned int mem; | |
852 | ||
853 | hw.width = var->xres_virtual; | |
854 | hw.ramdac = RAMDAC_VREFEN | RAMDAC_DAC8BIT; | |
855 | ||
856 | switch (var->bits_per_pixel) { | |
857 | case 8: | |
858 | hw.co_pixfmt = CO_PIXFMT_8BPP; | |
859 | hw.pitch = hw.width >> 3; | |
860 | hw.extseqmisc = EXT_SEQ_MISC_8; | |
861 | break; | |
862 | ||
863 | case 16: | |
864 | hw.co_pixfmt = CO_PIXFMT_16BPP; | |
865 | hw.pitch = hw.width >> 2; | |
866 | ||
867 | switch (var->green.length) { | |
868 | case 6: /* RGB565, 64k */ | |
869 | hw.extseqmisc = EXT_SEQ_MISC_16_RGB565; | |
870 | break; | |
871 | case 5: /* RGB555, 32k */ | |
872 | hw.extseqmisc = EXT_SEQ_MISC_16_RGB555; | |
873 | break; | |
874 | case 4: /* RGB444, 4k + transparency? */ | |
875 | hw.extseqmisc = EXT_SEQ_MISC_16_RGB444; | |
876 | break; | |
877 | default: | |
878 | BUG(); | |
879 | } | |
c2ec21c5 JR |
880 | break; |
881 | ||
1da177e4 LT |
882 | case 24:/* TRUECOLOUR, 16m */ |
883 | hw.co_pixfmt = CO_PIXFMT_24BPP; | |
884 | hw.width *= 3; | |
885 | hw.pitch = hw.width >> 3; | |
886 | hw.ramdac |= (RAMDAC_BYPASS | RAMDAC_RAMPWRDN); | |
887 | hw.extseqmisc = EXT_SEQ_MISC_24_RGB888; | |
888 | break; | |
889 | ||
890 | case 32:/* TRUECOLOUR, 16m */ | |
891 | hw.co_pixfmt = CO_PIXFMT_32BPP; | |
892 | hw.pitch = hw.width >> 1; | |
893 | hw.ramdac |= (RAMDAC_BYPASS | RAMDAC_RAMPWRDN); | |
894 | hw.extseqmisc = EXT_SEQ_MISC_32; | |
895 | break; | |
896 | ||
897 | default: | |
898 | BUG(); | |
899 | } | |
900 | ||
901 | /* | |
902 | * Sigh, this is absolutely disgusting, but caused by | |
903 | * the way the fbcon developers want to separate out | |
904 | * the "checking" and the "setting" of the video mode. | |
905 | * | |
906 | * If the mode is not suitable for the hardware here, | |
907 | * we can't prevent it being set by returning an error. | |
908 | * | |
909 | * In theory, since NetWinders contain just one VGA card, | |
910 | * we should never end up hitting this problem. | |
911 | */ | |
912 | BUG_ON(cyber2000fb_decode_clock(&hw, cfb, var) != 0); | |
913 | BUG_ON(cyber2000fb_decode_crtc(&hw, cfb, var) != 0); | |
914 | ||
915 | hw.width -= 1; | |
916 | hw.fetch = hw.pitch; | |
917 | if (!(cfb->mem_ctl2 & MEM_CTL2_64BIT)) | |
918 | hw.fetch <<= 1; | |
919 | hw.fetch += 1; | |
920 | ||
532237ef | 921 | cfb->fb.fix.line_length = var->xres_virtual * var->bits_per_pixel / 8; |
1da177e4 LT |
922 | |
923 | /* | |
924 | * Same here - if the size of the video mode exceeds the | |
925 | * available RAM, we can't prevent this mode being set. | |
926 | * | |
927 | * In theory, since NetWinders contain just one VGA card, | |
928 | * we should never end up hitting this problem. | |
929 | */ | |
930 | mem = cfb->fb.fix.line_length * var->yres_virtual; | |
931 | BUG_ON(mem > cfb->fb.fix.smem_len); | |
932 | ||
933 | /* | |
934 | * 8bpp displays are always pseudo colour. 16bpp and above | |
935 | * are direct colour or true colour, depending on whether | |
936 | * the RAMDAC palettes are bypassed. (Direct colour has | |
937 | * palettes, true colour does not.) | |
938 | */ | |
939 | if (var->bits_per_pixel == 8) | |
940 | cfb->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR; | |
941 | else if (hw.ramdac & RAMDAC_BYPASS) | |
942 | cfb->fb.fix.visual = FB_VISUAL_TRUECOLOR; | |
943 | else | |
944 | cfb->fb.fix.visual = FB_VISUAL_DIRECTCOLOR; | |
945 | ||
946 | cyber2000fb_set_timing(cfb, &hw); | |
947 | cyber2000fb_update_start(cfb, var); | |
948 | ||
949 | return 0; | |
950 | } | |
951 | ||
1da177e4 LT |
952 | /* |
953 | * Pan or Wrap the Display | |
954 | */ | |
955 | static int | |
956 | cyber2000fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info) | |
957 | { | |
958 | struct cfb_info *cfb = (struct cfb_info *)info; | |
959 | ||
960 | if (cyber2000fb_update_start(cfb, var)) | |
961 | return -EINVAL; | |
962 | ||
963 | cfb->fb.var.xoffset = var->xoffset; | |
964 | cfb->fb.var.yoffset = var->yoffset; | |
965 | ||
966 | if (var->vmode & FB_VMODE_YWRAP) { | |
967 | cfb->fb.var.vmode |= FB_VMODE_YWRAP; | |
968 | } else { | |
969 | cfb->fb.var.vmode &= ~FB_VMODE_YWRAP; | |
970 | } | |
971 | ||
972 | return 0; | |
973 | } | |
974 | ||
975 | /* | |
976 | * (Un)Blank the display. | |
977 | * | |
978 | * Blank the screen if blank_mode != 0, else unblank. If | |
979 | * blank == NULL then the caller blanks by setting the CLUT | |
980 | * (Color Look Up Table) to all black. Return 0 if blanking | |
981 | * succeeded, != 0 if un-/blanking failed due to e.g. a | |
982 | * video mode which doesn't support it. Implements VESA | |
983 | * suspend and powerdown modes on hardware that supports | |
984 | * disabling hsync/vsync: | |
985 | * blank_mode == 2: suspend vsync | |
986 | * blank_mode == 3: suspend hsync | |
987 | * blank_mode == 4: powerdown | |
988 | * | |
989 | * wms...Enable VESA DMPS compatible powerdown mode | |
990 | * run "setterm -powersave powerdown" to take advantage | |
991 | */ | |
992 | static int cyber2000fb_blank(int blank, struct fb_info *info) | |
993 | { | |
994 | struct cfb_info *cfb = (struct cfb_info *)info; | |
995 | unsigned int sync = 0; | |
996 | int i; | |
997 | ||
998 | switch (blank) { | |
999 | case FB_BLANK_POWERDOWN: /* powerdown - both sync lines down */ | |
1000 | sync = EXT_SYNC_CTL_VS_0 | EXT_SYNC_CTL_HS_0; | |
532237ef | 1001 | break; |
1da177e4 LT |
1002 | case FB_BLANK_HSYNC_SUSPEND: /* hsync off */ |
1003 | sync = EXT_SYNC_CTL_VS_NORMAL | EXT_SYNC_CTL_HS_0; | |
532237ef | 1004 | break; |
1da177e4 LT |
1005 | case FB_BLANK_VSYNC_SUSPEND: /* vsync off */ |
1006 | sync = EXT_SYNC_CTL_VS_0 | EXT_SYNC_CTL_HS_NORMAL; | |
1007 | break; | |
532237ef KH |
1008 | case FB_BLANK_NORMAL: /* soft blank */ |
1009 | default: /* unblank */ | |
1da177e4 LT |
1010 | break; |
1011 | } | |
1012 | ||
1013 | cyber2000_grphw(EXT_SYNC_CTL, sync, cfb); | |
1014 | ||
1015 | if (blank <= 1) { | |
1016 | /* turn on ramdacs */ | |
532237ef KH |
1017 | cfb->ramdac_powerdown &= ~(RAMDAC_DACPWRDN | RAMDAC_BYPASS | |
1018 | RAMDAC_RAMPWRDN); | |
1da177e4 LT |
1019 | cyber2000fb_write_ramdac_ctrl(cfb); |
1020 | } | |
1021 | ||
1022 | /* | |
1023 | * Soft blank/unblank the display. | |
1024 | */ | |
1025 | if (blank) { /* soft blank */ | |
1026 | for (i = 0; i < NR_PALETTE; i++) { | |
1027 | cyber2000fb_writeb(i, 0x3c8, cfb); | |
1028 | cyber2000fb_writeb(0, 0x3c9, cfb); | |
1029 | cyber2000fb_writeb(0, 0x3c9, cfb); | |
1030 | cyber2000fb_writeb(0, 0x3c9, cfb); | |
1031 | } | |
1032 | } else { /* unblank */ | |
1033 | for (i = 0; i < NR_PALETTE; i++) { | |
1034 | cyber2000fb_writeb(i, 0x3c8, cfb); | |
1035 | cyber2000fb_writeb(cfb->palette[i].red, 0x3c9, cfb); | |
1036 | cyber2000fb_writeb(cfb->palette[i].green, 0x3c9, cfb); | |
1037 | cyber2000fb_writeb(cfb->palette[i].blue, 0x3c9, cfb); | |
1038 | } | |
1039 | } | |
1040 | ||
1041 | if (blank >= 2) { | |
1042 | /* turn off ramdacs */ | |
532237ef KH |
1043 | cfb->ramdac_powerdown |= RAMDAC_DACPWRDN | RAMDAC_BYPASS | |
1044 | RAMDAC_RAMPWRDN; | |
1da177e4 LT |
1045 | cyber2000fb_write_ramdac_ctrl(cfb); |
1046 | } | |
1047 | ||
1048 | return 0; | |
1049 | } | |
1050 | ||
1051 | static struct fb_ops cyber2000fb_ops = { | |
1052 | .owner = THIS_MODULE, | |
1053 | .fb_check_var = cyber2000fb_check_var, | |
1054 | .fb_set_par = cyber2000fb_set_par, | |
1055 | .fb_setcolreg = cyber2000fb_setcolreg, | |
1056 | .fb_blank = cyber2000fb_blank, | |
1057 | .fb_pan_display = cyber2000fb_pan_display, | |
1058 | .fb_fillrect = cyber2000fb_fillrect, | |
1059 | .fb_copyarea = cyber2000fb_copyarea, | |
1060 | .fb_imageblit = cyber2000fb_imageblit, | |
1da177e4 LT |
1061 | .fb_sync = cyber2000fb_sync, |
1062 | }; | |
1063 | ||
1064 | /* | |
1065 | * This is the only "static" reference to the internal data structures | |
1066 | * of this driver. It is here solely at the moment to support the other | |
1067 | * CyberPro modules external to this driver. | |
1068 | */ | |
532237ef | 1069 | static struct cfb_info *int_cfb_info; |
1da177e4 LT |
1070 | |
1071 | /* | |
1072 | * Enable access to the extended registers | |
1073 | */ | |
1074 | void cyber2000fb_enable_extregs(struct cfb_info *cfb) | |
1075 | { | |
1076 | cfb->func_use_count += 1; | |
1077 | ||
1078 | if (cfb->func_use_count == 1) { | |
1079 | int old; | |
1080 | ||
1081 | old = cyber2000_grphr(EXT_FUNC_CTL, cfb); | |
1082 | old |= EXT_FUNC_CTL_EXTREGENBL; | |
1083 | cyber2000_grphw(EXT_FUNC_CTL, old, cfb); | |
1084 | } | |
1085 | } | |
532237ef | 1086 | EXPORT_SYMBOL(cyber2000fb_enable_extregs); |
1da177e4 LT |
1087 | |
1088 | /* | |
1089 | * Disable access to the extended registers | |
1090 | */ | |
1091 | void cyber2000fb_disable_extregs(struct cfb_info *cfb) | |
1092 | { | |
1093 | if (cfb->func_use_count == 1) { | |
1094 | int old; | |
1095 | ||
1096 | old = cyber2000_grphr(EXT_FUNC_CTL, cfb); | |
1097 | old &= ~EXT_FUNC_CTL_EXTREGENBL; | |
1098 | cyber2000_grphw(EXT_FUNC_CTL, old, cfb); | |
1099 | } | |
1100 | ||
1101 | if (cfb->func_use_count == 0) | |
1102 | printk(KERN_ERR "disable_extregs: count = 0\n"); | |
1103 | else | |
1104 | cfb->func_use_count -= 1; | |
1105 | } | |
532237ef | 1106 | EXPORT_SYMBOL(cyber2000fb_disable_extregs); |
1da177e4 LT |
1107 | |
1108 | void cyber2000fb_get_fb_var(struct cfb_info *cfb, struct fb_var_screeninfo *var) | |
1109 | { | |
1110 | memcpy(var, &cfb->fb.var, sizeof(struct fb_var_screeninfo)); | |
1111 | } | |
532237ef | 1112 | EXPORT_SYMBOL(cyber2000fb_get_fb_var); |
1da177e4 LT |
1113 | |
1114 | /* | |
1115 | * Attach a capture/tv driver to the core CyberX0X0 driver. | |
1116 | */ | |
1117 | int cyber2000fb_attach(struct cyberpro_info *info, int idx) | |
1118 | { | |
1119 | if (int_cfb_info != NULL) { | |
1120 | info->dev = int_cfb_info->dev; | |
1121 | info->regs = int_cfb_info->regs; | |
1122 | info->fb = int_cfb_info->fb.screen_base; | |
1123 | info->fb_size = int_cfb_info->fb.fix.smem_len; | |
1124 | info->enable_extregs = cyber2000fb_enable_extregs; | |
1125 | info->disable_extregs = cyber2000fb_disable_extregs; | |
532237ef | 1126 | info->info = int_cfb_info; |
1da177e4 | 1127 | |
532237ef KH |
1128 | strlcpy(info->dev_name, int_cfb_info->fb.fix.id, |
1129 | sizeof(info->dev_name)); | |
1da177e4 LT |
1130 | } |
1131 | ||
1132 | return int_cfb_info != NULL; | |
1133 | } | |
532237ef | 1134 | EXPORT_SYMBOL(cyber2000fb_attach); |
1da177e4 LT |
1135 | |
1136 | /* | |
1137 | * Detach a capture/tv driver from the core CyberX0X0 driver. | |
1138 | */ | |
1139 | void cyber2000fb_detach(int idx) | |
1140 | { | |
1141 | } | |
1da177e4 | 1142 | EXPORT_SYMBOL(cyber2000fb_detach); |
1da177e4 LT |
1143 | |
1144 | /* | |
1145 | * These parameters give | |
1146 | * 640x480, hsync 31.5kHz, vsync 60Hz | |
1147 | */ | |
1148 | static struct fb_videomode __devinitdata cyber2000fb_default_mode = { | |
1149 | .refresh = 60, | |
1150 | .xres = 640, | |
1151 | .yres = 480, | |
1152 | .pixclock = 39722, | |
1153 | .left_margin = 56, | |
1154 | .right_margin = 16, | |
1155 | .upper_margin = 34, | |
1156 | .lower_margin = 9, | |
1157 | .hsync_len = 88, | |
1158 | .vsync_len = 2, | |
1159 | .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, | |
1160 | .vmode = FB_VMODE_NONINTERLACED | |
1161 | }; | |
1162 | ||
1163 | static char igs_regs[] = { | |
1164 | EXT_CRT_IRQ, 0, | |
1165 | EXT_CRT_TEST, 0, | |
1166 | EXT_SYNC_CTL, 0, | |
1167 | EXT_SEG_WRITE_PTR, 0, | |
1168 | EXT_SEG_READ_PTR, 0, | |
1169 | EXT_BIU_MISC, EXT_BIU_MISC_LIN_ENABLE | | |
1170 | EXT_BIU_MISC_COP_ENABLE | | |
1171 | EXT_BIU_MISC_COP_BFC, | |
1172 | EXT_FUNC_CTL, 0, | |
1173 | CURS_H_START, 0, | |
1174 | CURS_H_START + 1, 0, | |
1175 | CURS_H_PRESET, 0, | |
1176 | CURS_V_START, 0, | |
1177 | CURS_V_START + 1, 0, | |
1178 | CURS_V_PRESET, 0, | |
1179 | CURS_CTL, 0, | |
1180 | EXT_ATTRIB_CTL, EXT_ATTRIB_CTL_EXT, | |
1181 | EXT_OVERSCAN_RED, 0, | |
1182 | EXT_OVERSCAN_GREEN, 0, | |
1183 | EXT_OVERSCAN_BLUE, 0, | |
1184 | ||
1185 | /* some of these are questionable when we have a BIOS */ | |
1186 | EXT_MEM_CTL0, EXT_MEM_CTL0_7CLK | | |
1187 | EXT_MEM_CTL0_RAS_1 | | |
1188 | EXT_MEM_CTL0_MULTCAS, | |
1189 | EXT_HIDDEN_CTL1, 0x30, | |
1190 | EXT_FIFO_CTL, 0x0b, | |
1191 | EXT_FIFO_CTL + 1, 0x17, | |
1192 | 0x76, 0x00, | |
1193 | EXT_HIDDEN_CTL4, 0xc8 | |
1194 | }; | |
1195 | ||
1196 | /* | |
1197 | * Initialise the CyberPro hardware. On the CyberPro5XXXX, | |
1198 | * ensure that we're using the correct PLL (5XXX's may be | |
1199 | * programmed to use an additional set of PLLs.) | |
1200 | */ | |
1201 | static void cyberpro_init_hw(struct cfb_info *cfb) | |
1202 | { | |
1203 | int i; | |
1204 | ||
1205 | for (i = 0; i < sizeof(igs_regs); i += 2) | |
532237ef | 1206 | cyber2000_grphw(igs_regs[i], igs_regs[i + 1], cfb); |
1da177e4 LT |
1207 | |
1208 | if (cfb->id == ID_CYBERPRO_5000) { | |
1209 | unsigned char val; | |
1210 | cyber2000fb_writeb(0xba, 0x3ce, cfb); | |
1211 | val = cyber2000fb_readb(0x3cf, cfb) & 0x80; | |
1212 | cyber2000fb_writeb(val, 0x3cf, cfb); | |
1213 | } | |
1214 | } | |
1215 | ||
532237ef KH |
1216 | static struct cfb_info __devinit *cyberpro_alloc_fb_info(unsigned int id, |
1217 | char *name) | |
1da177e4 LT |
1218 | { |
1219 | struct cfb_info *cfb; | |
1220 | ||
dd00cc48 | 1221 | cfb = kzalloc(sizeof(struct cfb_info), GFP_KERNEL); |
1da177e4 LT |
1222 | if (!cfb) |
1223 | return NULL; | |
1224 | ||
1da177e4 LT |
1225 | |
1226 | cfb->id = id; | |
1227 | ||
1228 | if (id == ID_CYBERPRO_5000) | |
532237ef | 1229 | cfb->ref_ps = 40690; /* 24.576 MHz */ |
1da177e4 | 1230 | else |
532237ef | 1231 | cfb->ref_ps = 69842; /* 14.31818 MHz (69841?) */ |
1da177e4 LT |
1232 | |
1233 | cfb->divisors[0] = 1; | |
1234 | cfb->divisors[1] = 2; | |
1235 | cfb->divisors[2] = 4; | |
1236 | ||
1237 | if (id == ID_CYBERPRO_2000) | |
1238 | cfb->divisors[3] = 8; | |
1239 | else | |
1240 | cfb->divisors[3] = 6; | |
1241 | ||
1242 | strcpy(cfb->fb.fix.id, name); | |
1243 | ||
1244 | cfb->fb.fix.type = FB_TYPE_PACKED_PIXELS; | |
1245 | cfb->fb.fix.type_aux = 0; | |
1246 | cfb->fb.fix.xpanstep = 0; | |
1247 | cfb->fb.fix.ypanstep = 1; | |
1248 | cfb->fb.fix.ywrapstep = 0; | |
1249 | ||
1250 | switch (id) { | |
1251 | case ID_IGA_1682: | |
1252 | cfb->fb.fix.accel = 0; | |
1253 | break; | |
1254 | ||
1255 | case ID_CYBERPRO_2000: | |
1256 | cfb->fb.fix.accel = FB_ACCEL_IGS_CYBER2000; | |
1257 | break; | |
1258 | ||
1259 | case ID_CYBERPRO_2010: | |
1260 | cfb->fb.fix.accel = FB_ACCEL_IGS_CYBER2010; | |
1261 | break; | |
1262 | ||
1263 | case ID_CYBERPRO_5000: | |
1264 | cfb->fb.fix.accel = FB_ACCEL_IGS_CYBER5000; | |
1265 | break; | |
1266 | } | |
1267 | ||
1268 | cfb->fb.var.nonstd = 0; | |
1269 | cfb->fb.var.activate = FB_ACTIVATE_NOW; | |
1270 | cfb->fb.var.height = -1; | |
1271 | cfb->fb.var.width = -1; | |
1272 | cfb->fb.var.accel_flags = FB_ACCELF_TEXT; | |
1273 | ||
1274 | cfb->fb.fbops = &cyber2000fb_ops; | |
1275 | cfb->fb.flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN; | |
eca02b0c | 1276 | cfb->fb.pseudo_palette = cfb->pseudo_palette; |
1da177e4 LT |
1277 | |
1278 | fb_alloc_cmap(&cfb->fb.cmap, NR_PALETTE, 0); | |
1279 | ||
1280 | return cfb; | |
1281 | } | |
1282 | ||
532237ef | 1283 | static void cyberpro_free_fb_info(struct cfb_info *cfb) |
1da177e4 LT |
1284 | { |
1285 | if (cfb) { | |
1286 | /* | |
1287 | * Free the colourmap | |
1288 | */ | |
1289 | fb_alloc_cmap(&cfb->fb.cmap, 0, 0); | |
1290 | ||
1291 | kfree(cfb); | |
1292 | } | |
1293 | } | |
1294 | ||
1295 | /* | |
1296 | * Parse Cyber2000fb options. Usage: | |
1297 | * video=cyber2000:font:fontname | |
1298 | */ | |
1299 | #ifndef MODULE | |
532237ef | 1300 | static int cyber2000fb_setup(char *options) |
1da177e4 LT |
1301 | { |
1302 | char *opt; | |
1303 | ||
1304 | if (!options || !*options) | |
1305 | return 0; | |
1306 | ||
1307 | while ((opt = strsep(&options, ",")) != NULL) { | |
1308 | if (!*opt) | |
1309 | continue; | |
1310 | ||
1311 | if (strncmp(opt, "font:", 5) == 0) { | |
1312 | static char default_font_storage[40]; | |
1313 | ||
532237ef KH |
1314 | strlcpy(default_font_storage, opt + 5, |
1315 | sizeof(default_font_storage)); | |
1da177e4 LT |
1316 | default_font = default_font_storage; |
1317 | continue; | |
1318 | } | |
1319 | ||
1320 | printk(KERN_ERR "CyberPro20x0: unknown parameter: %s\n", opt); | |
1321 | } | |
1322 | return 0; | |
1323 | } | |
1324 | #endif /* MODULE */ | |
1325 | ||
1326 | /* | |
1327 | * The CyberPro chips can be placed on many different bus types. | |
1328 | * This probe function is common to all bus types. The bus-specific | |
1329 | * probe function is expected to have: | |
1330 | * - enabled access to the linear memory region | |
1331 | * - memory mapped access to the registers | |
1332 | * - initialised mem_ctl1 and mem_ctl2 appropriately. | |
1333 | */ | |
1334 | static int __devinit cyberpro_common_probe(struct cfb_info *cfb) | |
1335 | { | |
1336 | u_long smem_size; | |
1337 | u_int h_sync, v_sync; | |
1338 | int err; | |
1339 | ||
1340 | cyberpro_init_hw(cfb); | |
1341 | ||
1342 | /* | |
1343 | * Get the video RAM size and width from the VGA register. | |
1344 | * This should have been already initialised by the BIOS, | |
1345 | * but if it's garbage, claim default 1MB VRAM (woody) | |
1346 | */ | |
1347 | cfb->mem_ctl1 = cyber2000_grphr(EXT_MEM_CTL1, cfb); | |
1348 | cfb->mem_ctl2 = cyber2000_grphr(EXT_MEM_CTL2, cfb); | |
1349 | ||
1350 | /* | |
1351 | * Determine the size of the memory. | |
1352 | */ | |
1353 | switch (cfb->mem_ctl2 & MEM_CTL2_SIZE_MASK) { | |
532237ef KH |
1354 | case MEM_CTL2_SIZE_4MB: |
1355 | smem_size = 0x00400000; | |
1356 | break; | |
1357 | case MEM_CTL2_SIZE_2MB: | |
1358 | smem_size = 0x00200000; | |
1359 | break; | |
1360 | case MEM_CTL2_SIZE_1MB: | |
1361 | smem_size = 0x00100000; | |
1362 | break; | |
1363 | default: | |
1364 | smem_size = 0x00100000; | |
1365 | break; | |
1da177e4 LT |
1366 | } |
1367 | ||
1368 | cfb->fb.fix.smem_len = smem_size; | |
1369 | cfb->fb.fix.mmio_len = MMIO_SIZE; | |
1370 | cfb->fb.screen_base = cfb->region; | |
1371 | ||
1372 | err = -EINVAL; | |
1373 | if (!fb_find_mode(&cfb->fb.var, &cfb->fb, NULL, NULL, 0, | |
532237ef KH |
1374 | &cyber2000fb_default_mode, 8)) { |
1375 | printk(KERN_ERR "%s: no valid mode found\n", cfb->fb.fix.id); | |
1da177e4 LT |
1376 | goto failed; |
1377 | } | |
1378 | ||
1379 | cfb->fb.var.yres_virtual = cfb->fb.fix.smem_len * 8 / | |
1380 | (cfb->fb.var.bits_per_pixel * cfb->fb.var.xres_virtual); | |
1381 | ||
1382 | if (cfb->fb.var.yres_virtual < cfb->fb.var.yres) | |
1383 | cfb->fb.var.yres_virtual = cfb->fb.var.yres; | |
1384 | ||
532237ef | 1385 | /* fb_set_var(&cfb->fb.var, -1, &cfb->fb); */ |
1da177e4 LT |
1386 | |
1387 | /* | |
1388 | * Calculate the hsync and vsync frequencies. Note that | |
1389 | * we split the 1e12 constant up so that we can preserve | |
1390 | * the precision and fit the results into 32-bit registers. | |
1391 | * (1953125000 * 512 = 1e12) | |
1392 | */ | |
1393 | h_sync = 1953125000 / cfb->fb.var.pixclock; | |
1394 | h_sync = h_sync * 512 / (cfb->fb.var.xres + cfb->fb.var.left_margin + | |
1395 | cfb->fb.var.right_margin + cfb->fb.var.hsync_len); | |
1396 | v_sync = h_sync / (cfb->fb.var.yres + cfb->fb.var.upper_margin + | |
1397 | cfb->fb.var.lower_margin + cfb->fb.var.vsync_len); | |
1398 | ||
1399 | printk(KERN_INFO "%s: %dKiB VRAM, using %dx%d, %d.%03dkHz, %dHz\n", | |
1400 | cfb->fb.fix.id, cfb->fb.fix.smem_len >> 10, | |
1401 | cfb->fb.var.xres, cfb->fb.var.yres, | |
1402 | h_sync / 1000, h_sync % 1000, v_sync); | |
1403 | ||
1404 | if (cfb->dev) | |
1405 | cfb->fb.device = &cfb->dev->dev; | |
1406 | err = register_framebuffer(&cfb->fb); | |
1407 | ||
1408 | failed: | |
1409 | return err; | |
1410 | } | |
1411 | ||
1412 | static void cyberpro_common_resume(struct cfb_info *cfb) | |
1413 | { | |
1414 | cyberpro_init_hw(cfb); | |
1415 | ||
1416 | /* | |
1417 | * Reprogram the MEM_CTL1 and MEM_CTL2 registers | |
1418 | */ | |
1419 | cyber2000_grphw(EXT_MEM_CTL1, cfb->mem_ctl1, cfb); | |
1420 | cyber2000_grphw(EXT_MEM_CTL2, cfb->mem_ctl2, cfb); | |
1421 | ||
1422 | /* | |
1423 | * Restore the old video mode and the palette. | |
1424 | * We also need to tell fbcon to redraw the console. | |
1425 | */ | |
1426 | cyber2000fb_set_par(&cfb->fb); | |
1427 | } | |
1428 | ||
1429 | #ifdef CONFIG_ARCH_SHARK | |
1430 | ||
eab184c2 | 1431 | #include <mach/framebuffer.h> |
1da177e4 | 1432 | |
532237ef | 1433 | static int __devinit cyberpro_vl_probe(void) |
1da177e4 LT |
1434 | { |
1435 | struct cfb_info *cfb; | |
1436 | int err = -ENOMEM; | |
1437 | ||
532237ef KH |
1438 | if (!request_mem_region(FB_START, FB_SIZE, "CyberPro2010")) |
1439 | return err; | |
1da177e4 LT |
1440 | |
1441 | cfb = cyberpro_alloc_fb_info(ID_CYBERPRO_2010, "CyberPro2010"); | |
1442 | if (!cfb) | |
1443 | goto failed_release; | |
1444 | ||
1445 | cfb->dev = NULL; | |
532237ef | 1446 | cfb->region = ioremap(FB_START, FB_SIZE); |
1da177e4 LT |
1447 | if (!cfb->region) |
1448 | goto failed_ioremap; | |
1449 | ||
1450 | cfb->regs = cfb->region + MMIO_OFFSET; | |
1451 | cfb->fb.fix.mmio_start = FB_START + MMIO_OFFSET; | |
1452 | cfb->fb.fix.smem_start = FB_START; | |
1453 | ||
1454 | /* | |
1455 | * Bring up the hardware. This is expected to enable access | |
1456 | * to the linear memory region, and allow access to the memory | |
1457 | * mapped registers. Also, mem_ctl1 and mem_ctl2 must be | |
1458 | * initialised. | |
1459 | */ | |
1460 | cyber2000fb_writeb(0x18, 0x46e8, cfb); | |
1461 | cyber2000fb_writeb(0x01, 0x102, cfb); | |
1462 | cyber2000fb_writeb(0x08, 0x46e8, cfb); | |
1463 | cyber2000fb_writeb(EXT_BIU_MISC, 0x3ce, cfb); | |
1464 | cyber2000fb_writeb(EXT_BIU_MISC_LIN_ENABLE, 0x3cf, cfb); | |
1465 | ||
1466 | cfb->mclk_mult = 0xdb; | |
1467 | cfb->mclk_div = 0x54; | |
1468 | ||
1469 | err = cyberpro_common_probe(cfb); | |
1470 | if (err) | |
1471 | goto failed; | |
1472 | ||
1473 | if (int_cfb_info == NULL) | |
1474 | int_cfb_info = cfb; | |
1475 | ||
1476 | return 0; | |
1477 | ||
1478 | failed: | |
1479 | iounmap(cfb->region); | |
1480 | failed_ioremap: | |
1481 | cyberpro_free_fb_info(cfb); | |
1482 | failed_release: | |
532237ef | 1483 | release_mem_region(FB_START, FB_SIZE); |
1da177e4 LT |
1484 | |
1485 | return err; | |
1486 | } | |
1487 | #endif /* CONFIG_ARCH_SHARK */ | |
1488 | ||
1489 | /* | |
1490 | * PCI specific support. | |
1491 | */ | |
1492 | #ifdef CONFIG_PCI | |
1493 | /* | |
1494 | * We need to wake up the CyberPro, and make sure its in linear memory | |
1495 | * mode. Unfortunately, this is specific to the platform and card that | |
1496 | * we are running on. | |
1497 | * | |
1498 | * On x86 and ARM, should we be initialising the CyberPro first via the | |
1499 | * IO registers, and then the MMIO registers to catch all cases? Can we | |
1500 | * end up in the situation where the chip is in MMIO mode, but not awake | |
1501 | * on an x86 system? | |
1502 | */ | |
1503 | static int cyberpro_pci_enable_mmio(struct cfb_info *cfb) | |
1504 | { | |
1505 | unsigned char val; | |
1506 | ||
1507 | #if defined(__sparc_v9__) | |
1508 | #error "You lose, consult DaveM." | |
1509 | #elif defined(__sparc__) | |
1510 | /* | |
1511 | * SPARC does not have an "outb" instruction, so we generate | |
1512 | * I/O cycles storing into a reserved memory space at | |
1513 | * physical address 0x3000000 | |
1514 | */ | |
cd030665 | 1515 | unsigned char __iomem *iop; |
1da177e4 LT |
1516 | |
1517 | iop = ioremap(0x3000000, 0x5000); | |
1518 | if (iop == NULL) { | |
89b409f7 | 1519 | printk(KERN_ERR "iga5000: cannot map I/O\n"); |
1da177e4 LT |
1520 | return -ENOMEM; |
1521 | } | |
1522 | ||
1523 | writeb(0x18, iop + 0x46e8); | |
1524 | writeb(0x01, iop + 0x102); | |
1525 | writeb(0x08, iop + 0x46e8); | |
1526 | writeb(EXT_BIU_MISC, iop + 0x3ce); | |
1527 | writeb(EXT_BIU_MISC_LIN_ENABLE, iop + 0x3cf); | |
1528 | ||
cd030665 | 1529 | iounmap(iop); |
1da177e4 LT |
1530 | #else |
1531 | /* | |
1532 | * Most other machine types are "normal", so | |
1533 | * we use the standard IO-based wakeup. | |
1534 | */ | |
1535 | outb(0x18, 0x46e8); | |
1536 | outb(0x01, 0x102); | |
1537 | outb(0x08, 0x46e8); | |
1538 | outb(EXT_BIU_MISC, 0x3ce); | |
1539 | outb(EXT_BIU_MISC_LIN_ENABLE, 0x3cf); | |
1540 | #endif | |
1541 | ||
1542 | /* | |
1543 | * Allow the CyberPro to accept PCI burst accesses | |
1544 | */ | |
cd792aa8 | 1545 | if (cfb->id == ID_CYBERPRO_2010) { |
532237ef KH |
1546 | printk(KERN_INFO "%s: NOT enabling PCI bursts\n", |
1547 | cfb->fb.fix.id); | |
cd792aa8 WS |
1548 | } else { |
1549 | val = cyber2000_grphr(EXT_BUS_CTL, cfb); | |
1550 | if (!(val & EXT_BUS_CTL_PCIBURST_WRITE)) { | |
1551 | printk(KERN_INFO "%s: enabling PCI bursts\n", | |
1552 | cfb->fb.fix.id); | |
1da177e4 | 1553 | |
cd792aa8 | 1554 | val |= EXT_BUS_CTL_PCIBURST_WRITE; |
1da177e4 | 1555 | |
cd792aa8 WS |
1556 | if (cfb->id == ID_CYBERPRO_5000) |
1557 | val |= EXT_BUS_CTL_PCIBURST_READ; | |
1da177e4 | 1558 | |
cd792aa8 WS |
1559 | cyber2000_grphw(EXT_BUS_CTL, val, cfb); |
1560 | } | |
1da177e4 LT |
1561 | } |
1562 | ||
1563 | return 0; | |
1564 | } | |
1565 | ||
1566 | static int __devinit | |
1567 | cyberpro_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) | |
1568 | { | |
1569 | struct cfb_info *cfb; | |
1570 | char name[16]; | |
1571 | int err; | |
1572 | ||
1573 | sprintf(name, "CyberPro%4X", id->device); | |
1574 | ||
1575 | err = pci_enable_device(dev); | |
1576 | if (err) | |
1577 | return err; | |
1578 | ||
1da177e4 LT |
1579 | err = -ENOMEM; |
1580 | cfb = cyberpro_alloc_fb_info(id->driver_data, name); | |
1581 | if (!cfb) | |
1582 | goto failed_release; | |
1583 | ||
ed5a35ac RK |
1584 | err = pci_request_regions(dev, cfb->fb.fix.id); |
1585 | if (err) | |
1586 | goto failed_regions; | |
1587 | ||
1da177e4 | 1588 | cfb->dev = dev; |
3c36aa5c | 1589 | cfb->region = pci_ioremap_bar(dev, 0); |
1da177e4 LT |
1590 | if (!cfb->region) |
1591 | goto failed_ioremap; | |
1592 | ||
1593 | cfb->regs = cfb->region + MMIO_OFFSET; | |
1594 | cfb->fb.fix.mmio_start = pci_resource_start(dev, 0) + MMIO_OFFSET; | |
1595 | cfb->fb.fix.smem_start = pci_resource_start(dev, 0); | |
1596 | ||
1597 | /* | |
1598 | * Bring up the hardware. This is expected to enable access | |
1599 | * to the linear memory region, and allow access to the memory | |
1600 | * mapped registers. Also, mem_ctl1 and mem_ctl2 must be | |
1601 | * initialised. | |
1602 | */ | |
1603 | err = cyberpro_pci_enable_mmio(cfb); | |
1604 | if (err) | |
1605 | goto failed; | |
1606 | ||
1607 | /* | |
1608 | * Use MCLK from BIOS. FIXME: what about hotplug? | |
1609 | */ | |
1610 | cfb->mclk_mult = cyber2000_grphr(EXT_MCLK_MULT, cfb); | |
1611 | cfb->mclk_div = cyber2000_grphr(EXT_MCLK_DIV, cfb); | |
1612 | ||
1613 | #ifdef __arm__ | |
1614 | /* | |
1615 | * MCLK on the NetWinder and the Shark is fixed at 75MHz | |
1616 | */ | |
1617 | if (machine_is_netwinder()) { | |
1618 | cfb->mclk_mult = 0xdb; | |
1619 | cfb->mclk_div = 0x54; | |
1620 | } | |
1621 | #endif | |
1622 | ||
1623 | err = cyberpro_common_probe(cfb); | |
1624 | if (err) | |
1625 | goto failed; | |
1626 | ||
1627 | /* | |
1628 | * Our driver data | |
1629 | */ | |
1630 | pci_set_drvdata(dev, cfb); | |
1631 | if (int_cfb_info == NULL) | |
1632 | int_cfb_info = cfb; | |
1633 | ||
1634 | return 0; | |
1635 | ||
1636 | failed: | |
1637 | iounmap(cfb->region); | |
1638 | failed_ioremap: | |
ed5a35ac RK |
1639 | pci_release_regions(dev); |
1640 | failed_regions: | |
1da177e4 LT |
1641 | cyberpro_free_fb_info(cfb); |
1642 | failed_release: | |
1da177e4 LT |
1643 | return err; |
1644 | } | |
1645 | ||
1646 | static void __devexit cyberpro_pci_remove(struct pci_dev *dev) | |
1647 | { | |
1648 | struct cfb_info *cfb = pci_get_drvdata(dev); | |
1649 | ||
1650 | if (cfb) { | |
1651 | /* | |
1652 | * If unregister_framebuffer fails, then | |
1653 | * we will be leaving hooks that could cause | |
1654 | * oopsen laying around. | |
1655 | */ | |
1656 | if (unregister_framebuffer(&cfb->fb)) | |
1657 | printk(KERN_WARNING "%s: danger Will Robinson, " | |
1658 | "danger danger! Oopsen imminent!\n", | |
1659 | cfb->fb.fix.id); | |
1660 | iounmap(cfb->region); | |
1661 | cyberpro_free_fb_info(cfb); | |
1662 | ||
1663 | /* | |
1664 | * Ensure that the driver data is no longer | |
1665 | * valid. | |
1666 | */ | |
1667 | pci_set_drvdata(dev, NULL); | |
1668 | if (cfb == int_cfb_info) | |
1669 | int_cfb_info = NULL; | |
1670 | ||
1671 | pci_release_regions(dev); | |
1672 | } | |
1673 | } | |
1674 | ||
1675 | static int cyberpro_pci_suspend(struct pci_dev *dev, pm_message_t state) | |
1676 | { | |
1677 | return 0; | |
1678 | } | |
1679 | ||
1680 | /* | |
1681 | * Re-initialise the CyberPro hardware | |
1682 | */ | |
1683 | static int cyberpro_pci_resume(struct pci_dev *dev) | |
1684 | { | |
1685 | struct cfb_info *cfb = pci_get_drvdata(dev); | |
1686 | ||
1687 | if (cfb) { | |
1688 | cyberpro_pci_enable_mmio(cfb); | |
1689 | cyberpro_common_resume(cfb); | |
1690 | } | |
1691 | ||
1692 | return 0; | |
1693 | } | |
1694 | ||
1695 | static struct pci_device_id cyberpro_pci_table[] = { | |
532237ef KH |
1696 | /* Not yet |
1697 | * { PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_1682, | |
1698 | * PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_IGA_1682 }, | |
1699 | */ | |
1da177e4 LT |
1700 | { PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_2000, |
1701 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_CYBERPRO_2000 }, | |
1702 | { PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_2010, | |
1703 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_CYBERPRO_2010 }, | |
1704 | { PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_5000, | |
1705 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_CYBERPRO_5000 }, | |
1706 | { 0, } | |
1707 | }; | |
1708 | ||
532237ef | 1709 | MODULE_DEVICE_TABLE(pci, cyberpro_pci_table); |
1da177e4 LT |
1710 | |
1711 | static struct pci_driver cyberpro_driver = { | |
1712 | .name = "CyberPro", | |
1713 | .probe = cyberpro_pci_probe, | |
1714 | .remove = __devexit_p(cyberpro_pci_remove), | |
1715 | .suspend = cyberpro_pci_suspend, | |
1716 | .resume = cyberpro_pci_resume, | |
1717 | .id_table = cyberpro_pci_table | |
1718 | }; | |
1719 | #endif | |
1720 | ||
1721 | /* | |
1722 | * I don't think we can use the "module_init" stuff here because | |
1723 | * the fbcon stuff may not be initialised yet. Hence the #ifdef | |
1724 | * around module_init. | |
1725 | * | |
1726 | * Tony: "module_init" is now required | |
1727 | */ | |
1728 | static int __init cyber2000fb_init(void) | |
1729 | { | |
1730 | int ret = -1, err; | |
1731 | ||
1732 | #ifndef MODULE | |
1733 | char *option = NULL; | |
1734 | ||
1735 | if (fb_get_options("cyber2000fb", &option)) | |
1736 | return -ENODEV; | |
1737 | cyber2000fb_setup(option); | |
1738 | #endif | |
1739 | ||
1740 | #ifdef CONFIG_ARCH_SHARK | |
1741 | err = cyberpro_vl_probe(); | |
ab8e2eb7 | 1742 | if (!err) |
1da177e4 | 1743 | ret = 0; |
1da177e4 LT |
1744 | #endif |
1745 | #ifdef CONFIG_PCI | |
1746 | err = pci_register_driver(&cyberpro_driver); | |
1747 | if (!err) | |
1748 | ret = 0; | |
1749 | #endif | |
1750 | ||
1751 | return ret ? err : 0; | |
1752 | } | |
ab8e2eb7 | 1753 | module_init(cyber2000fb_init); |
1da177e4 | 1754 | |
ab8e2eb7 | 1755 | #ifndef CONFIG_ARCH_SHARK |
1da177e4 LT |
1756 | static void __exit cyberpro_exit(void) |
1757 | { | |
1758 | pci_unregister_driver(&cyberpro_driver); | |
1759 | } | |
1da177e4 | 1760 | module_exit(cyberpro_exit); |
ab8e2eb7 | 1761 | #endif |
1da177e4 LT |
1762 | |
1763 | MODULE_AUTHOR("Russell King"); | |
1764 | MODULE_DESCRIPTION("CyberPro 2000, 2010 and 5000 framebuffer driver"); | |
1765 | MODULE_LICENSE("GPL"); |