]>
Commit | Line | Data |
---|---|---|
9b53a9e2 YS |
1 | /* |
2 | * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. | |
3 | * | |
4 | * Freescale DIU Frame Buffer device driver | |
5 | * | |
6 | * Authors: Hongjun Chen <hong-jun.chen@freescale.com> | |
7 | * Paul Widmer <paul.widmer@freescale.com> | |
8 | * Srikanth Srinivasan <srikanth.srinivasan@freescale.com> | |
9 | * York Sun <yorksun@freescale.com> | |
10 | * | |
11 | * Based on imxfb.c Copyright (C) 2004 S.Hauer, Pengutronix | |
12 | * | |
13 | * This program is free software; you can redistribute it and/or modify it | |
14 | * under the terms of the GNU General Public License as published by the | |
15 | * Free Software Foundation; either version 2 of the License, or (at your | |
16 | * option) any later version. | |
17 | * | |
18 | */ | |
19 | ||
20 | #include <linux/module.h> | |
21 | #include <linux/kernel.h> | |
22 | #include <linux/errno.h> | |
23 | #include <linux/string.h> | |
24 | #include <linux/slab.h> | |
25 | #include <linux/fb.h> | |
26 | #include <linux/init.h> | |
27 | #include <linux/dma-mapping.h> | |
28 | #include <linux/platform_device.h> | |
29 | #include <linux/interrupt.h> | |
30 | #include <linux/clk.h> | |
31 | #include <linux/uaccess.h> | |
32 | #include <linux/vmalloc.h> | |
b715f9f0 | 33 | #include <linux/spinlock.h> |
5af50730 RH |
34 | #include <linux/of_address.h> |
35 | #include <linux/of_irq.h> | |
9b53a9e2 | 36 | |
9b53a9e2 | 37 | #include <sysdev/fsl_soc.h> |
0814a979 | 38 | #include <linux/fsl-diu-fb.h> |
8b856f04 | 39 | #include "edid.h" |
9b53a9e2 | 40 | |
ddd3d905 | 41 | #define NUM_AOIS 5 /* 1 for plane 0, 2 for planes 1 & 2 each */ |
b715f9f0 TT |
42 | |
43 | /* HW cursor parameters */ | |
44 | #define MAX_CURS 32 | |
45 | ||
46 | /* INT_STATUS/INT_MASK field descriptions */ | |
47 | #define INT_VSYNC 0x01 /* Vsync interrupt */ | |
48 | #define INT_VSYNC_WB 0x02 /* Vsync interrupt for write back operation */ | |
49 | #define INT_UNDRUN 0x04 /* Under run exception interrupt */ | |
50 | #define INT_PARERR 0x08 /* Display parameters error interrupt */ | |
51 | #define INT_LS_BF_VS 0x10 /* Lines before vsync. interrupt */ | |
52 | ||
9b53a9e2 | 53 | /* |
63cf8df4 TT |
54 | * List of supported video modes |
55 | * | |
760af8f8 TT |
56 | * The first entry is the default video mode. The remain entries are in |
57 | * order if increasing resolution and frequency. The 320x240-60 mode is | |
58 | * the initial AOI for the second and third planes. | |
9b53a9e2 | 59 | */ |
48c68c4f | 60 | static struct fb_videomode fsl_diu_mode_db[] = { |
9b53a9e2 | 61 | { |
9b53a9e2 YS |
62 | .refresh = 60, |
63 | .xres = 1024, | |
64 | .yres = 768, | |
65 | .pixclock = 15385, | |
66 | .left_margin = 160, | |
67 | .right_margin = 24, | |
68 | .upper_margin = 29, | |
69 | .lower_margin = 3, | |
70 | .hsync_len = 136, | |
71 | .vsync_len = 6, | |
72 | .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, | |
73 | .vmode = FB_VMODE_NONINTERLACED | |
74 | }, | |
75 | { | |
760af8f8 TT |
76 | .refresh = 60, |
77 | .xres = 320, | |
78 | .yres = 240, | |
79 | .pixclock = 79440, | |
80 | .left_margin = 16, | |
81 | .right_margin = 16, | |
82 | .upper_margin = 16, | |
83 | .lower_margin = 5, | |
84 | .hsync_len = 48, | |
85 | .vsync_len = 1, | |
86 | .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, | |
87 | .vmode = FB_VMODE_NONINTERLACED | |
88 | }, | |
89 | { | |
90 | .refresh = 60, | |
91 | .xres = 640, | |
92 | .yres = 480, | |
93 | .pixclock = 39722, | |
94 | .left_margin = 48, | |
95 | .right_margin = 16, | |
96 | .upper_margin = 33, | |
97 | .lower_margin = 10, | |
98 | .hsync_len = 96, | |
99 | .vsync_len = 2, | |
100 | .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, | |
101 | .vmode = FB_VMODE_NONINTERLACED | |
102 | }, | |
103 | { | |
104 | .refresh = 72, | |
105 | .xres = 640, | |
106 | .yres = 480, | |
107 | .pixclock = 32052, | |
108 | .left_margin = 128, | |
109 | .right_margin = 24, | |
110 | .upper_margin = 28, | |
111 | .lower_margin = 9, | |
112 | .hsync_len = 40, | |
113 | .vsync_len = 3, | |
114 | .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, | |
115 | .vmode = FB_VMODE_NONINTERLACED | |
116 | }, | |
117 | { | |
118 | .refresh = 75, | |
119 | .xres = 640, | |
120 | .yres = 480, | |
121 | .pixclock = 31747, | |
122 | .left_margin = 120, | |
123 | .right_margin = 16, | |
124 | .upper_margin = 16, | |
125 | .lower_margin = 1, | |
126 | .hsync_len = 64, | |
127 | .vsync_len = 3, | |
128 | .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, | |
129 | .vmode = FB_VMODE_NONINTERLACED | |
130 | }, | |
131 | { | |
132 | .refresh = 90, | |
133 | .xres = 640, | |
134 | .yres = 480, | |
135 | .pixclock = 25057, | |
136 | .left_margin = 120, | |
137 | .right_margin = 32, | |
138 | .upper_margin = 14, | |
139 | .lower_margin = 25, | |
140 | .hsync_len = 40, | |
141 | .vsync_len = 14, | |
142 | .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, | |
143 | .vmode = FB_VMODE_NONINTERLACED | |
144 | }, | |
145 | { | |
146 | .refresh = 100, | |
147 | .xres = 640, | |
148 | .yres = 480, | |
149 | .pixclock = 22272, | |
150 | .left_margin = 48, | |
151 | .right_margin = 32, | |
152 | .upper_margin = 17, | |
153 | .lower_margin = 22, | |
154 | .hsync_len = 128, | |
155 | .vsync_len = 12, | |
156 | .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, | |
157 | .vmode = FB_VMODE_NONINTERLACED | |
158 | }, | |
159 | { | |
160 | .refresh = 60, | |
161 | .xres = 800, | |
162 | .yres = 480, | |
163 | .pixclock = 33805, | |
164 | .left_margin = 96, | |
165 | .right_margin = 24, | |
166 | .upper_margin = 10, | |
167 | .lower_margin = 3, | |
168 | .hsync_len = 72, | |
169 | .vsync_len = 7, | |
170 | .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, | |
171 | .vmode = FB_VMODE_NONINTERLACED | |
172 | }, | |
173 | { | |
174 | .refresh = 60, | |
175 | .xres = 800, | |
176 | .yres = 600, | |
177 | .pixclock = 25000, | |
178 | .left_margin = 88, | |
179 | .right_margin = 40, | |
180 | .upper_margin = 23, | |
181 | .lower_margin = 1, | |
182 | .hsync_len = 128, | |
183 | .vsync_len = 4, | |
184 | .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, | |
185 | .vmode = FB_VMODE_NONINTERLACED | |
186 | }, | |
187 | { | |
188 | .refresh = 60, | |
189 | .xres = 854, | |
190 | .yres = 480, | |
191 | .pixclock = 31518, | |
192 | .left_margin = 104, | |
193 | .right_margin = 16, | |
194 | .upper_margin = 13, | |
195 | .lower_margin = 1, | |
196 | .hsync_len = 88, | |
197 | .vsync_len = 3, | |
198 | .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, | |
199 | .vmode = FB_VMODE_NONINTERLACED | |
200 | }, | |
201 | { | |
9b53a9e2 YS |
202 | .refresh = 70, |
203 | .xres = 1024, | |
204 | .yres = 768, | |
205 | .pixclock = 16886, | |
206 | .left_margin = 3, | |
207 | .right_margin = 3, | |
208 | .upper_margin = 2, | |
209 | .lower_margin = 2, | |
210 | .hsync_len = 40, | |
211 | .vsync_len = 18, | |
212 | .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, | |
213 | .vmode = FB_VMODE_NONINTERLACED | |
214 | }, | |
215 | { | |
9b53a9e2 YS |
216 | .refresh = 75, |
217 | .xres = 1024, | |
218 | .yres = 768, | |
219 | .pixclock = 15009, | |
220 | .left_margin = 3, | |
221 | .right_margin = 3, | |
222 | .upper_margin = 2, | |
223 | .lower_margin = 2, | |
224 | .hsync_len = 80, | |
225 | .vsync_len = 32, | |
226 | .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, | |
227 | .vmode = FB_VMODE_NONINTERLACED | |
228 | }, | |
229 | { | |
760af8f8 TT |
230 | .refresh = 60, |
231 | .xres = 1280, | |
232 | .yres = 480, | |
233 | .pixclock = 18939, | |
234 | .left_margin = 353, | |
235 | .right_margin = 47, | |
236 | .upper_margin = 39, | |
237 | .lower_margin = 4, | |
238 | .hsync_len = 8, | |
239 | .vsync_len = 2, | |
240 | .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, | |
241 | .vmode = FB_VMODE_NONINTERLACED | |
242 | }, | |
243 | { | |
244 | .refresh = 60, | |
245 | .xres = 1280, | |
246 | .yres = 720, | |
247 | .pixclock = 13426, | |
248 | .left_margin = 192, | |
249 | .right_margin = 64, | |
250 | .upper_margin = 22, | |
251 | .lower_margin = 1, | |
252 | .hsync_len = 136, | |
253 | .vsync_len = 3, | |
254 | .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, | |
255 | .vmode = FB_VMODE_NONINTERLACED | |
256 | }, | |
257 | { | |
9b53a9e2 YS |
258 | .refresh = 60, |
259 | .xres = 1280, | |
260 | .yres = 1024, | |
261 | .pixclock = 9375, | |
262 | .left_margin = 38, | |
263 | .right_margin = 128, | |
264 | .upper_margin = 2, | |
265 | .lower_margin = 7, | |
266 | .hsync_len = 216, | |
267 | .vsync_len = 37, | |
268 | .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, | |
269 | .vmode = FB_VMODE_NONINTERLACED | |
270 | }, | |
271 | { | |
9b53a9e2 YS |
272 | .refresh = 70, |
273 | .xres = 1280, | |
274 | .yres = 1024, | |
275 | .pixclock = 9380, | |
276 | .left_margin = 6, | |
277 | .right_margin = 6, | |
278 | .upper_margin = 4, | |
279 | .lower_margin = 4, | |
280 | .hsync_len = 60, | |
281 | .vsync_len = 94, | |
282 | .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, | |
283 | .vmode = FB_VMODE_NONINTERLACED | |
284 | }, | |
285 | { | |
9b53a9e2 YS |
286 | .refresh = 75, |
287 | .xres = 1280, | |
288 | .yres = 1024, | |
289 | .pixclock = 9380, | |
290 | .left_margin = 6, | |
291 | .right_margin = 6, | |
292 | .upper_margin = 4, | |
293 | .lower_margin = 4, | |
294 | .hsync_len = 60, | |
295 | .vsync_len = 15, | |
296 | .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, | |
297 | .vmode = FB_VMODE_NONINTERLACED | |
298 | }, | |
299 | { | |
9b53a9e2 | 300 | .refresh = 60, |
760af8f8 TT |
301 | .xres = 1920, |
302 | .yres = 1080, | |
303 | .pixclock = 5787, | |
304 | .left_margin = 328, | |
305 | .right_margin = 120, | |
306 | .upper_margin = 34, | |
307 | .lower_margin = 1, | |
308 | .hsync_len = 208, | |
309 | .vsync_len = 3, | |
9b53a9e2 YS |
310 | .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, |
311 | .vmode = FB_VMODE_NONINTERLACED | |
312 | }, | |
313 | }; | |
314 | ||
760af8f8 | 315 | static char *fb_mode; |
9b53a9e2 | 316 | static unsigned long default_bpp = 32; |
7653aaab TT |
317 | static enum fsl_diu_monitor_port monitor_port; |
318 | static char *monitor_string; | |
9b53a9e2 YS |
319 | |
320 | #if defined(CONFIG_NOT_COHERENT_CACHE) | |
321 | static u8 *coherence_data; | |
322 | static size_t coherence_data_size; | |
323 | static unsigned int d_cache_line_size; | |
324 | #endif | |
325 | ||
326 | static DEFINE_SPINLOCK(diu_lock); | |
327 | ||
2572df91 TT |
328 | enum mfb_index { |
329 | PLANE0 = 0, /* Plane 0, only one AOI that fills the screen */ | |
330 | PLANE1_AOI0, /* Plane 1, first AOI */ | |
331 | PLANE1_AOI1, /* Plane 1, second AOI */ | |
332 | PLANE2_AOI0, /* Plane 2, first AOI */ | |
333 | PLANE2_AOI1, /* Plane 2, second AOI */ | |
334 | }; | |
335 | ||
9b53a9e2 | 336 | struct mfb_info { |
2572df91 | 337 | enum mfb_index index; |
9b53a9e2 YS |
338 | char *id; |
339 | int registered; | |
9b53a9e2 YS |
340 | unsigned long pseudo_palette[16]; |
341 | struct diu_ad *ad; | |
9b53a9e2 YS |
342 | unsigned char g_alpha; |
343 | unsigned int count; | |
344 | int x_aoi_d; /* aoi display x offset to physical screen */ | |
345 | int y_aoi_d; /* aoi display y offset to physical screen */ | |
346 | struct fsl_diu_data *parent; | |
347 | }; | |
348 | ||
ddd3d905 TT |
349 | /** |
350 | * struct fsl_diu_data - per-DIU data structure | |
351 | * @dma_addr: DMA address of this structure | |
352 | * @fsl_diu_info: fb_info objects, one per AOI | |
353 | * @dev_attr: sysfs structure | |
354 | * @irq: IRQ | |
ddd3d905 TT |
355 | * @monitor_port: the monitor port this DIU is connected to |
356 | * @diu_reg: pointer to the DIU hardware registers | |
357 | * @reg_lock: spinlock for register access | |
358 | * @dummy_aoi: video buffer for the 4x4 32-bit dummy AOI | |
359 | * dummy_ad: DIU Area Descriptor for the dummy AOI | |
360 | * @ad[]: Area Descriptors for each real AOI | |
361 | * @gamma: gamma color table | |
362 | * @cursor: hardware cursor data | |
363 | * | |
364 | * This data structure must be allocated with 32-byte alignment, so that the | |
365 | * internal fields can be aligned properly. | |
366 | */ | |
367 | struct fsl_diu_data { | |
368 | dma_addr_t dma_addr; | |
369 | struct fb_info fsl_diu_info[NUM_AOIS]; | |
370 | struct mfb_info mfb[NUM_AOIS]; | |
371 | struct device_attribute dev_attr; | |
372 | unsigned int irq; | |
ddd3d905 TT |
373 | enum fsl_diu_monitor_port monitor_port; |
374 | struct diu __iomem *diu_reg; | |
375 | spinlock_t reg_lock; | |
376 | u8 dummy_aoi[4 * 4 * 4]; | |
377 | struct diu_ad dummy_ad __aligned(8); | |
378 | struct diu_ad ad[NUM_AOIS] __aligned(8); | |
379 | u8 gamma[256 * 3] __aligned(32); | |
38dd2daf TT |
380 | /* It's easier to parse the cursor data as little-endian */ |
381 | __le16 cursor[MAX_CURS * MAX_CURS] __aligned(32); | |
382 | /* Blank cursor data -- used to hide the cursor */ | |
383 | __le16 blank_cursor[MAX_CURS * MAX_CURS] __aligned(32); | |
e7b42718 TT |
384 | uint8_t edid_data[EDID_LENGTH]; |
385 | bool has_edid; | |
ddd3d905 TT |
386 | } __aligned(32); |
387 | ||
388 | /* Determine the DMA address of a member of the fsl_diu_data structure */ | |
389 | #define DMA_ADDR(p, f) ((p)->dma_addr + offsetof(struct fsl_diu_data, f)) | |
9b53a9e2 YS |
390 | |
391 | static struct mfb_info mfb_template[] = { | |
2572df91 TT |
392 | { |
393 | .index = PLANE0, | |
4a85dc8b TT |
394 | .id = "Panel0", |
395 | .registered = 0, | |
396 | .count = 0, | |
397 | .x_aoi_d = 0, | |
398 | .y_aoi_d = 0, | |
9b53a9e2 | 399 | }, |
2572df91 TT |
400 | { |
401 | .index = PLANE1_AOI0, | |
4a85dc8b TT |
402 | .id = "Panel1 AOI0", |
403 | .registered = 0, | |
404 | .g_alpha = 0xff, | |
405 | .count = 0, | |
406 | .x_aoi_d = 0, | |
407 | .y_aoi_d = 0, | |
9b53a9e2 | 408 | }, |
2572df91 TT |
409 | { |
410 | .index = PLANE1_AOI1, | |
4a85dc8b TT |
411 | .id = "Panel1 AOI1", |
412 | .registered = 0, | |
413 | .g_alpha = 0xff, | |
414 | .count = 0, | |
415 | .x_aoi_d = 0, | |
416 | .y_aoi_d = 480, | |
9b53a9e2 | 417 | }, |
2572df91 TT |
418 | { |
419 | .index = PLANE2_AOI0, | |
4a85dc8b TT |
420 | .id = "Panel2 AOI0", |
421 | .registered = 0, | |
422 | .g_alpha = 0xff, | |
423 | .count = 0, | |
424 | .x_aoi_d = 640, | |
425 | .y_aoi_d = 0, | |
9b53a9e2 | 426 | }, |
2572df91 TT |
427 | { |
428 | .index = PLANE2_AOI1, | |
4a85dc8b TT |
429 | .id = "Panel2 AOI1", |
430 | .registered = 0, | |
431 | .g_alpha = 0xff, | |
432 | .count = 0, | |
433 | .x_aoi_d = 640, | |
434 | .y_aoi_d = 480, | |
9b53a9e2 YS |
435 | }, |
436 | }; | |
437 | ||
5cc2a36f TT |
438 | #ifdef DEBUG |
439 | static void __attribute__ ((unused)) fsl_diu_dump(struct diu __iomem *hw) | |
440 | { | |
441 | mb(); | |
442 | pr_debug("DIU: desc=%08x,%08x,%08x, gamma=%08x pallete=%08x " | |
443 | "cursor=%08x curs_pos=%08x diu_mode=%08x bgnd=%08x " | |
444 | "disp_size=%08x hsyn_para=%08x vsyn_para=%08x syn_pol=%08x " | |
445 | "thresholds=%08x int_mask=%08x plut=%08x\n", | |
446 | hw->desc[0], hw->desc[1], hw->desc[2], hw->gamma, | |
447 | hw->pallete, hw->cursor, hw->curs_pos, hw->diu_mode, | |
448 | hw->bgnd, hw->disp_size, hw->hsyn_para, hw->vsyn_para, | |
449 | hw->syn_pol, hw->thresholds, hw->int_mask, hw->plut); | |
450 | rmb(); | |
451 | } | |
452 | #endif | |
453 | ||
7653aaab TT |
454 | /** |
455 | * fsl_diu_name_to_port - convert a port name to a monitor port enum | |
456 | * | |
457 | * Takes the name of a monitor port ("dvi", "lvds", or "dlvds") and returns | |
458 | * the enum fsl_diu_monitor_port that corresponds to that string. | |
459 | * | |
460 | * For compatibility with older versions, a number ("0", "1", or "2") is also | |
461 | * supported. | |
462 | * | |
463 | * If the string is unknown, DVI is assumed. | |
464 | * | |
465 | * If the particular port is not supported by the platform, another port | |
466 | * (platform-specific) is chosen instead. | |
467 | */ | |
468 | static enum fsl_diu_monitor_port fsl_diu_name_to_port(const char *s) | |
469 | { | |
470 | enum fsl_diu_monitor_port port = FSL_DIU_PORT_DVI; | |
471 | unsigned long val; | |
472 | ||
473 | if (s) { | |
f5725af5 | 474 | if (!kstrtoul(s, 10, &val) && (val <= 2)) |
7653aaab TT |
475 | port = (enum fsl_diu_monitor_port) val; |
476 | else if (strncmp(s, "lvds", 4) == 0) | |
477 | port = FSL_DIU_PORT_LVDS; | |
478 | else if (strncmp(s, "dlvds", 5) == 0) | |
479 | port = FSL_DIU_PORT_DLVDS; | |
480 | } | |
481 | ||
482 | return diu_ops.valid_monitor_port(port); | |
483 | } | |
484 | ||
0d9dab39 AG |
485 | /* |
486 | * Workaround for failed writing desc register of planes. | |
487 | * Needed with MPC5121 DIU rev 2.0 silicon. | |
488 | */ | |
489 | void wr_reg_wa(u32 *reg, u32 val) | |
490 | { | |
491 | do { | |
492 | out_be32(reg, val); | |
493 | } while (in_be32(reg) != val); | |
494 | } | |
495 | ||
7e47c211 | 496 | static void fsl_diu_enable_panel(struct fb_info *info) |
9b53a9e2 YS |
497 | { |
498 | struct mfb_info *pmfbi, *cmfbi, *mfbi = info->par; | |
9b53a9e2 | 499 | struct diu_ad *ad = mfbi->ad; |
b7795052 TT |
500 | struct fsl_diu_data *data = mfbi->parent; |
501 | struct diu __iomem *hw = data->diu_reg; | |
9b53a9e2 | 502 | |
7e47c211 TT |
503 | switch (mfbi->index) { |
504 | case PLANE0: | |
7af3b136 | 505 | wr_reg_wa(&hw->desc[0], ad->paddr); |
7e47c211 TT |
506 | break; |
507 | case PLANE1_AOI0: | |
b7795052 | 508 | cmfbi = &data->mfb[2]; |
7e47c211 TT |
509 | if (hw->desc[1] != ad->paddr) { /* AOI0 closed */ |
510 | if (cmfbi->count > 0) /* AOI1 open */ | |
511 | ad->next_ad = | |
512 | cpu_to_le32(cmfbi->ad->paddr); | |
513 | else | |
514 | ad->next_ad = 0; | |
515 | wr_reg_wa(&hw->desc[1], ad->paddr); | |
9b53a9e2 | 516 | } |
7e47c211 TT |
517 | break; |
518 | case PLANE2_AOI0: | |
b7795052 | 519 | cmfbi = &data->mfb[4]; |
7e47c211 TT |
520 | if (hw->desc[2] != ad->paddr) { /* AOI0 closed */ |
521 | if (cmfbi->count > 0) /* AOI1 open */ | |
522 | ad->next_ad = | |
523 | cpu_to_le32(cmfbi->ad->paddr); | |
524 | else | |
525 | ad->next_ad = 0; | |
526 | wr_reg_wa(&hw->desc[2], ad->paddr); | |
527 | } | |
528 | break; | |
529 | case PLANE1_AOI1: | |
b7795052 | 530 | pmfbi = &data->mfb[1]; |
7e47c211 | 531 | ad->next_ad = 0; |
b7795052 | 532 | if (hw->desc[1] == data->dummy_ad.paddr) |
7e47c211 TT |
533 | wr_reg_wa(&hw->desc[1], ad->paddr); |
534 | else /* AOI0 open */ | |
535 | pmfbi->ad->next_ad = cpu_to_le32(ad->paddr); | |
536 | break; | |
537 | case PLANE2_AOI1: | |
b7795052 | 538 | pmfbi = &data->mfb[3]; |
7e47c211 | 539 | ad->next_ad = 0; |
b7795052 | 540 | if (hw->desc[2] == data->dummy_ad.paddr) |
7e47c211 TT |
541 | wr_reg_wa(&hw->desc[2], ad->paddr); |
542 | else /* AOI0 was open */ | |
543 | pmfbi->ad->next_ad = cpu_to_le32(ad->paddr); | |
544 | break; | |
545 | } | |
9b53a9e2 YS |
546 | } |
547 | ||
2572df91 | 548 | static void fsl_diu_disable_panel(struct fb_info *info) |
9b53a9e2 YS |
549 | { |
550 | struct mfb_info *pmfbi, *cmfbi, *mfbi = info->par; | |
9b53a9e2 | 551 | struct diu_ad *ad = mfbi->ad; |
b7795052 TT |
552 | struct fsl_diu_data *data = mfbi->parent; |
553 | struct diu __iomem *hw = data->diu_reg; | |
9b53a9e2 YS |
554 | |
555 | switch (mfbi->index) { | |
2572df91 | 556 | case PLANE0: |
7af3b136 | 557 | wr_reg_wa(&hw->desc[0], 0); |
9b53a9e2 | 558 | break; |
2572df91 | 559 | case PLANE1_AOI0: |
b7795052 | 560 | cmfbi = &data->mfb[2]; |
9b53a9e2 | 561 | if (cmfbi->count > 0) /* AOI1 is open */ |
0d9dab39 | 562 | wr_reg_wa(&hw->desc[1], cmfbi->ad->paddr); |
9b53a9e2 YS |
563 | /* move AOI1 to the first */ |
564 | else /* AOI1 was closed */ | |
b7795052 | 565 | wr_reg_wa(&hw->desc[1], data->dummy_ad.paddr); |
9b53a9e2 YS |
566 | /* close AOI 0 */ |
567 | break; | |
2572df91 | 568 | case PLANE2_AOI0: |
b7795052 | 569 | cmfbi = &data->mfb[4]; |
9b53a9e2 | 570 | if (cmfbi->count > 0) /* AOI1 is open */ |
0d9dab39 | 571 | wr_reg_wa(&hw->desc[2], cmfbi->ad->paddr); |
9b53a9e2 YS |
572 | /* move AOI1 to the first */ |
573 | else /* AOI1 was closed */ | |
b7795052 | 574 | wr_reg_wa(&hw->desc[2], data->dummy_ad.paddr); |
9b53a9e2 YS |
575 | /* close AOI 0 */ |
576 | break; | |
2572df91 | 577 | case PLANE1_AOI1: |
b7795052 | 578 | pmfbi = &data->mfb[1]; |
9b53a9e2 YS |
579 | if (hw->desc[1] != ad->paddr) { |
580 | /* AOI1 is not the first in the chain */ | |
581 | if (pmfbi->count > 0) | |
582 | /* AOI0 is open, must be the first */ | |
583 | pmfbi->ad->next_ad = 0; | |
584 | } else /* AOI1 is the first in the chain */ | |
b7795052 | 585 | wr_reg_wa(&hw->desc[1], data->dummy_ad.paddr); |
9b53a9e2 YS |
586 | /* close AOI 1 */ |
587 | break; | |
2572df91 | 588 | case PLANE2_AOI1: |
b7795052 | 589 | pmfbi = &data->mfb[3]; |
9b53a9e2 YS |
590 | if (hw->desc[2] != ad->paddr) { |
591 | /* AOI1 is not the first in the chain */ | |
592 | if (pmfbi->count > 0) | |
593 | /* AOI0 is open, must be the first */ | |
594 | pmfbi->ad->next_ad = 0; | |
595 | } else /* AOI1 is the first in the chain */ | |
b7795052 | 596 | wr_reg_wa(&hw->desc[2], data->dummy_ad.paddr); |
9b53a9e2 YS |
597 | /* close AOI 1 */ |
598 | break; | |
9b53a9e2 | 599 | } |
9b53a9e2 YS |
600 | } |
601 | ||
602 | static void enable_lcdc(struct fb_info *info) | |
603 | { | |
9b53a9e2 | 604 | struct mfb_info *mfbi = info->par; |
b7795052 TT |
605 | struct fsl_diu_data *data = mfbi->parent; |
606 | struct diu __iomem *hw = data->diu_reg; | |
9b53a9e2 | 607 | |
d397e916 | 608 | out_be32(&hw->diu_mode, MFB_MODE1); |
9b53a9e2 YS |
609 | } |
610 | ||
611 | static void disable_lcdc(struct fb_info *info) | |
612 | { | |
9b53a9e2 | 613 | struct mfb_info *mfbi = info->par; |
b7795052 TT |
614 | struct fsl_diu_data *data = mfbi->parent; |
615 | struct diu __iomem *hw = data->diu_reg; | |
9b53a9e2 | 616 | |
d397e916 | 617 | out_be32(&hw->diu_mode, 0); |
9b53a9e2 YS |
618 | } |
619 | ||
620 | static void adjust_aoi_size_position(struct fb_var_screeninfo *var, | |
621 | struct fb_info *info) | |
622 | { | |
623 | struct mfb_info *lower_aoi_mfbi, *upper_aoi_mfbi, *mfbi = info->par; | |
b7795052 | 624 | struct fsl_diu_data *data = mfbi->parent; |
2572df91 TT |
625 | int available_height, upper_aoi_bottom; |
626 | enum mfb_index index = mfbi->index; | |
9b53a9e2 YS |
627 | int lower_aoi_is_open, upper_aoi_is_open; |
628 | __u32 base_plane_width, base_plane_height, upper_aoi_height; | |
629 | ||
b7795052 TT |
630 | base_plane_width = data->fsl_diu_info[0].var.xres; |
631 | base_plane_height = data->fsl_diu_info[0].var.yres; | |
9b53a9e2 | 632 | |
fdfaa483 YS |
633 | if (mfbi->x_aoi_d < 0) |
634 | mfbi->x_aoi_d = 0; | |
635 | if (mfbi->y_aoi_d < 0) | |
636 | mfbi->y_aoi_d = 0; | |
9b53a9e2 | 637 | switch (index) { |
2572df91 | 638 | case PLANE0: |
9b53a9e2 YS |
639 | if (mfbi->x_aoi_d != 0) |
640 | mfbi->x_aoi_d = 0; | |
641 | if (mfbi->y_aoi_d != 0) | |
642 | mfbi->y_aoi_d = 0; | |
643 | break; | |
2572df91 TT |
644 | case PLANE1_AOI0: |
645 | case PLANE2_AOI0: | |
b7795052 | 646 | lower_aoi_mfbi = data->fsl_diu_info[index+1].par; |
9b53a9e2 YS |
647 | lower_aoi_is_open = lower_aoi_mfbi->count > 0 ? 1 : 0; |
648 | if (var->xres > base_plane_width) | |
649 | var->xres = base_plane_width; | |
650 | if ((mfbi->x_aoi_d + var->xres) > base_plane_width) | |
651 | mfbi->x_aoi_d = base_plane_width - var->xres; | |
652 | ||
653 | if (lower_aoi_is_open) | |
654 | available_height = lower_aoi_mfbi->y_aoi_d; | |
655 | else | |
656 | available_height = base_plane_height; | |
657 | if (var->yres > available_height) | |
658 | var->yres = available_height; | |
659 | if ((mfbi->y_aoi_d + var->yres) > available_height) | |
660 | mfbi->y_aoi_d = available_height - var->yres; | |
661 | break; | |
2572df91 TT |
662 | case PLANE1_AOI1: |
663 | case PLANE2_AOI1: | |
b7795052 TT |
664 | upper_aoi_mfbi = data->fsl_diu_info[index-1].par; |
665 | upper_aoi_height = data->fsl_diu_info[index-1].var.yres; | |
9b53a9e2 YS |
666 | upper_aoi_bottom = upper_aoi_mfbi->y_aoi_d + upper_aoi_height; |
667 | upper_aoi_is_open = upper_aoi_mfbi->count > 0 ? 1 : 0; | |
668 | if (var->xres > base_plane_width) | |
669 | var->xres = base_plane_width; | |
670 | if ((mfbi->x_aoi_d + var->xres) > base_plane_width) | |
671 | mfbi->x_aoi_d = base_plane_width - var->xres; | |
672 | if (mfbi->y_aoi_d < 0) | |
673 | mfbi->y_aoi_d = 0; | |
674 | if (upper_aoi_is_open) { | |
675 | if (mfbi->y_aoi_d < upper_aoi_bottom) | |
676 | mfbi->y_aoi_d = upper_aoi_bottom; | |
677 | available_height = base_plane_height | |
678 | - upper_aoi_bottom; | |
679 | } else | |
680 | available_height = base_plane_height; | |
681 | if (var->yres > available_height) | |
682 | var->yres = available_height; | |
683 | if ((mfbi->y_aoi_d + var->yres) > base_plane_height) | |
684 | mfbi->y_aoi_d = base_plane_height - var->yres; | |
685 | break; | |
686 | } | |
687 | } | |
688 | /* | |
689 | * Checks to see if the hardware supports the state requested by var passed | |
690 | * in. This function does not alter the hardware state! If the var passed in | |
691 | * is slightly off by what the hardware can support then we alter the var | |
692 | * PASSED in to what we can do. If the hardware doesn't support mode change | |
693 | * a -EINVAL will be returned by the upper layers. | |
694 | */ | |
695 | static int fsl_diu_check_var(struct fb_var_screeninfo *var, | |
696 | struct fb_info *info) | |
697 | { | |
9b53a9e2 YS |
698 | if (var->xres_virtual < var->xres) |
699 | var->xres_virtual = var->xres; | |
700 | if (var->yres_virtual < var->yres) | |
701 | var->yres_virtual = var->yres; | |
702 | ||
703 | if (var->xoffset < 0) | |
704 | var->xoffset = 0; | |
705 | ||
706 | if (var->yoffset < 0) | |
707 | var->yoffset = 0; | |
708 | ||
709 | if (var->xoffset + info->var.xres > info->var.xres_virtual) | |
710 | var->xoffset = info->var.xres_virtual - info->var.xres; | |
711 | ||
712 | if (var->yoffset + info->var.yres > info->var.yres_virtual) | |
713 | var->yoffset = info->var.yres_virtual - info->var.yres; | |
714 | ||
715 | if ((var->bits_per_pixel != 32) && (var->bits_per_pixel != 24) && | |
716 | (var->bits_per_pixel != 16)) | |
717 | var->bits_per_pixel = default_bpp; | |
718 | ||
719 | switch (var->bits_per_pixel) { | |
720 | case 16: | |
721 | var->red.length = 5; | |
722 | var->red.offset = 11; | |
723 | var->red.msb_right = 0; | |
724 | ||
725 | var->green.length = 6; | |
726 | var->green.offset = 5; | |
727 | var->green.msb_right = 0; | |
728 | ||
729 | var->blue.length = 5; | |
730 | var->blue.offset = 0; | |
731 | var->blue.msb_right = 0; | |
732 | ||
733 | var->transp.length = 0; | |
734 | var->transp.offset = 0; | |
735 | var->transp.msb_right = 0; | |
736 | break; | |
737 | case 24: | |
738 | var->red.length = 8; | |
739 | var->red.offset = 0; | |
740 | var->red.msb_right = 0; | |
741 | ||
742 | var->green.length = 8; | |
743 | var->green.offset = 8; | |
744 | var->green.msb_right = 0; | |
745 | ||
746 | var->blue.length = 8; | |
747 | var->blue.offset = 16; | |
748 | var->blue.msb_right = 0; | |
749 | ||
750 | var->transp.length = 0; | |
751 | var->transp.offset = 0; | |
752 | var->transp.msb_right = 0; | |
753 | break; | |
754 | case 32: | |
755 | var->red.length = 8; | |
756 | var->red.offset = 16; | |
757 | var->red.msb_right = 0; | |
758 | ||
759 | var->green.length = 8; | |
760 | var->green.offset = 8; | |
761 | var->green.msb_right = 0; | |
762 | ||
763 | var->blue.length = 8; | |
764 | var->blue.offset = 0; | |
765 | var->blue.msb_right = 0; | |
766 | ||
767 | var->transp.length = 8; | |
768 | var->transp.offset = 24; | |
769 | var->transp.msb_right = 0; | |
770 | ||
771 | break; | |
772 | } | |
9b53a9e2 YS |
773 | |
774 | var->height = -1; | |
775 | var->width = -1; | |
776 | var->grayscale = 0; | |
777 | ||
778 | /* Copy nonstd field to/from sync for fbset usage */ | |
779 | var->sync |= var->nonstd; | |
780 | var->nonstd |= var->sync; | |
781 | ||
782 | adjust_aoi_size_position(var, info); | |
783 | return 0; | |
784 | } | |
785 | ||
786 | static void set_fix(struct fb_info *info) | |
787 | { | |
788 | struct fb_fix_screeninfo *fix = &info->fix; | |
789 | struct fb_var_screeninfo *var = &info->var; | |
790 | struct mfb_info *mfbi = info->par; | |
791 | ||
ec02dd23 | 792 | strncpy(fix->id, mfbi->id, sizeof(fix->id)); |
9b53a9e2 YS |
793 | fix->line_length = var->xres_virtual * var->bits_per_pixel / 8; |
794 | fix->type = FB_TYPE_PACKED_PIXELS; | |
795 | fix->accel = FB_ACCEL_NONE; | |
796 | fix->visual = FB_VISUAL_TRUECOLOR; | |
797 | fix->xpanstep = 1; | |
798 | fix->ypanstep = 1; | |
799 | } | |
800 | ||
801 | static void update_lcdc(struct fb_info *info) | |
802 | { | |
803 | struct fb_var_screeninfo *var = &info->var; | |
804 | struct mfb_info *mfbi = info->par; | |
b7795052 | 805 | struct fsl_diu_data *data = mfbi->parent; |
3c755b7c | 806 | struct diu __iomem *hw; |
9b53a9e2 | 807 | int i, j; |
ddd3d905 | 808 | u8 *gamma_table_base; |
9b53a9e2 YS |
809 | |
810 | u32 temp; | |
811 | ||
b7795052 | 812 | hw = data->diu_reg; |
9b53a9e2 | 813 | |
28671735 TT |
814 | if (diu_ops.set_monitor_port) |
815 | diu_ops.set_monitor_port(data->monitor_port); | |
b7795052 | 816 | gamma_table_base = data->gamma; |
ddd3d905 | 817 | |
9b53a9e2 YS |
818 | /* Prep for DIU init - gamma table, cursor table */ |
819 | ||
820 | for (i = 0; i <= 2; i++) | |
4a85dc8b TT |
821 | for (j = 0; j <= 255; j++) |
822 | *gamma_table_base++ = j; | |
9b53a9e2 | 823 | |
e09a8c3a TT |
824 | if (diu_ops.set_gamma_table) |
825 | diu_ops.set_gamma_table(data->monitor_port, data->gamma); | |
9b53a9e2 | 826 | |
9b53a9e2 YS |
827 | disable_lcdc(info); |
828 | ||
829 | /* Program DIU registers */ | |
830 | ||
b7795052 | 831 | out_be32(&hw->gamma, DMA_ADDR(data, gamma)); |
9b53a9e2 | 832 | |
ceb001b0 TT |
833 | out_be32(&hw->bgnd, 0x007F7F7F); /* Set background to grey */ |
834 | out_be32(&hw->disp_size, (var->yres << 16) | var->xres); | |
9b53a9e2 YS |
835 | |
836 | /* Horizontal and vertical configuration register */ | |
837 | temp = var->left_margin << 22 | /* BP_H */ | |
838 | var->hsync_len << 11 | /* PW_H */ | |
839 | var->right_margin; /* FP_H */ | |
840 | ||
841 | out_be32(&hw->hsyn_para, temp); | |
842 | ||
843 | temp = var->upper_margin << 22 | /* BP_V */ | |
844 | var->vsync_len << 11 | /* PW_V */ | |
845 | var->lower_margin; /* FP_V */ | |
846 | ||
847 | out_be32(&hw->vsyn_para, temp); | |
848 | ||
9b53a9e2 YS |
849 | diu_ops.set_pixel_clock(var->pixclock); |
850 | ||
ceb001b0 TT |
851 | #ifndef CONFIG_PPC_MPC512x |
852 | /* | |
853 | * The PLUT register is defined differently on the MPC5121 than it | |
854 | * is on other SOCs. Unfortunately, there's no documentation that | |
855 | * explains how it's supposed to be programmed, so for now, we leave | |
856 | * it at the default value on the MPC5121. | |
857 | * | |
858 | * For other SOCs, program it for the highest priority, which will | |
859 | * reduce the chance of underrun. Technically, we should scale the | |
860 | * priority to match the screen resolution, but doing that properly | |
861 | * requires delicate fine-tuning for each use-case. | |
862 | */ | |
9b53a9e2 | 863 | out_be32(&hw->plut, 0x01F5F666); |
ceb001b0 | 864 | #endif |
9b53a9e2 YS |
865 | |
866 | /* Enable the DIU */ | |
867 | enable_lcdc(info); | |
868 | } | |
869 | ||
870 | static int map_video_memory(struct fb_info *info) | |
871 | { | |
537a1bf0 | 872 | u32 smem_len = info->fix.line_length * info->var.yres_virtual; |
05342c0b | 873 | void *p; |
9b53a9e2 | 874 | |
05342c0b TT |
875 | p = alloc_pages_exact(smem_len, GFP_DMA | __GFP_ZERO); |
876 | if (!p) { | |
154152ae | 877 | dev_err(info->dev, "unable to allocate fb memory\n"); |
9b53a9e2 YS |
878 | return -ENOMEM; |
879 | } | |
537a1bf0 | 880 | mutex_lock(&info->mm_lock); |
05342c0b TT |
881 | info->screen_base = p; |
882 | info->fix.smem_start = virt_to_phys(info->screen_base); | |
537a1bf0 KH |
883 | info->fix.smem_len = smem_len; |
884 | mutex_unlock(&info->mm_lock); | |
9b53a9e2 YS |
885 | info->screen_size = info->fix.smem_len; |
886 | ||
9b53a9e2 YS |
887 | return 0; |
888 | } | |
889 | ||
890 | static void unmap_video_memory(struct fb_info *info) | |
891 | { | |
05342c0b TT |
892 | void *p = info->screen_base; |
893 | size_t l = info->fix.smem_len; | |
894 | ||
537a1bf0 | 895 | mutex_lock(&info->mm_lock); |
05946bce | 896 | info->screen_base = NULL; |
9b53a9e2 YS |
897 | info->fix.smem_start = 0; |
898 | info->fix.smem_len = 0; | |
537a1bf0 | 899 | mutex_unlock(&info->mm_lock); |
05342c0b TT |
900 | |
901 | if (p) | |
902 | free_pages_exact(p, l); | |
9b53a9e2 YS |
903 | } |
904 | ||
ae5591e3 YS |
905 | /* |
906 | * Using the fb_var_screeninfo in fb_info we set the aoi of this | |
907 | * particular framebuffer. It is a light version of fsl_diu_set_par. | |
908 | */ | |
909 | static int fsl_diu_set_aoi(struct fb_info *info) | |
910 | { | |
911 | struct fb_var_screeninfo *var = &info->var; | |
912 | struct mfb_info *mfbi = info->par; | |
913 | struct diu_ad *ad = mfbi->ad; | |
914 | ||
915 | /* AOI should not be greater than display size */ | |
916 | ad->offset_xyi = cpu_to_le32((var->yoffset << 16) | var->xoffset); | |
917 | ad->offset_xyd = cpu_to_le32((mfbi->y_aoi_d << 16) | mfbi->x_aoi_d); | |
918 | return 0; | |
919 | } | |
920 | ||
e09a8c3a TT |
921 | /** |
922 | * fsl_diu_get_pixel_format: return the pixel format for a given color depth | |
923 | * | |
924 | * The pixel format is a 32-bit value that determine which bits in each | |
925 | * pixel are to be used for each color. This is the default function used | |
926 | * if the platform does not define its own version. | |
927 | */ | |
928 | static u32 fsl_diu_get_pixel_format(unsigned int bits_per_pixel) | |
929 | { | |
930 | #define PF_BYTE_F 0x10000000 | |
931 | #define PF_ALPHA_C_MASK 0x0E000000 | |
932 | #define PF_ALPHA_C_SHIFT 25 | |
933 | #define PF_BLUE_C_MASK 0x01800000 | |
934 | #define PF_BLUE_C_SHIFT 23 | |
935 | #define PF_GREEN_C_MASK 0x00600000 | |
936 | #define PF_GREEN_C_SHIFT 21 | |
937 | #define PF_RED_C_MASK 0x00180000 | |
938 | #define PF_RED_C_SHIFT 19 | |
939 | #define PF_PALETTE 0x00040000 | |
940 | #define PF_PIXEL_S_MASK 0x00030000 | |
941 | #define PF_PIXEL_S_SHIFT 16 | |
942 | #define PF_COMP_3_MASK 0x0000F000 | |
943 | #define PF_COMP_3_SHIFT 12 | |
944 | #define PF_COMP_2_MASK 0x00000F00 | |
945 | #define PF_COMP_2_SHIFT 8 | |
946 | #define PF_COMP_1_MASK 0x000000F0 | |
947 | #define PF_COMP_1_SHIFT 4 | |
948 | #define PF_COMP_0_MASK 0x0000000F | |
949 | #define PF_COMP_0_SHIFT 0 | |
950 | ||
5d3cc311 | 951 | #define MAKE_PF(alpha, red, green, blue, size, c0, c1, c2, c3) \ |
e09a8c3a TT |
952 | cpu_to_le32(PF_BYTE_F | (alpha << PF_ALPHA_C_SHIFT) | \ |
953 | (blue << PF_BLUE_C_SHIFT) | (green << PF_GREEN_C_SHIFT) | \ | |
954 | (red << PF_RED_C_SHIFT) | (c3 << PF_COMP_3_SHIFT) | \ | |
955 | (c2 << PF_COMP_2_SHIFT) | (c1 << PF_COMP_1_SHIFT) | \ | |
956 | (c0 << PF_COMP_0_SHIFT) | (size << PF_PIXEL_S_SHIFT)) | |
957 | ||
958 | switch (bits_per_pixel) { | |
959 | case 32: | |
960 | /* 0x88883316 */ | |
5d3cc311 | 961 | return MAKE_PF(3, 2, 1, 0, 3, 8, 8, 8, 8); |
e09a8c3a TT |
962 | case 24: |
963 | /* 0x88082219 */ | |
5d3cc311 | 964 | return MAKE_PF(4, 0, 1, 2, 2, 8, 8, 8, 0); |
e09a8c3a TT |
965 | case 16: |
966 | /* 0x65053118 */ | |
967 | return MAKE_PF(4, 2, 1, 0, 1, 5, 6, 5, 0); | |
968 | default: | |
969 | pr_err("fsl-diu: unsupported color depth %u\n", bits_per_pixel); | |
970 | return 0; | |
971 | } | |
972 | } | |
973 | ||
38dd2daf TT |
974 | /* |
975 | * Copies a cursor image from user space to the proper place in driver | |
976 | * memory so that the hardware can display the cursor image. | |
977 | * | |
978 | * Cursor data is represented as a sequence of 'width' bits packed into bytes. | |
979 | * That is, the first 8 bits are in the first byte, the second 8 bits in the | |
980 | * second byte, and so on. Therefore, the each row of the cursor is (width + | |
981 | * 7) / 8 bytes of 'data' | |
982 | * | |
983 | * The DIU only supports cursors up to 32x32 (MAX_CURS). We reject cursors | |
984 | * larger than this, so we already know that 'width' <= 32. Therefore, we can | |
985 | * simplify our code by using a 32-bit big-endian integer ("line") to read in | |
986 | * a single line of pixels, and only look at the top 'width' bits of that | |
987 | * integer. | |
988 | * | |
989 | * This could result in an unaligned 32-bit read. For example, if the cursor | |
990 | * is 24x24, then the first three bytes of 'image' contain the pixel data for | |
991 | * the top line of the cursor. We do a 32-bit read of 'image', but we look | |
992 | * only at the top 24 bits. Then we increment 'image' by 3 bytes. The next | |
993 | * read is unaligned. The only problem is that we might read past the end of | |
994 | * 'image' by 1-3 bytes, but that should not cause any problems. | |
995 | */ | |
996 | static void fsl_diu_load_cursor_image(struct fb_info *info, | |
997 | const void *image, uint16_t bg, uint16_t fg, | |
998 | unsigned int width, unsigned int height) | |
999 | { | |
1000 | struct mfb_info *mfbi = info->par; | |
1001 | struct fsl_diu_data *data = mfbi->parent; | |
1002 | __le16 *cursor = data->cursor; | |
1003 | __le16 _fg = cpu_to_le16(fg); | |
1004 | __le16 _bg = cpu_to_le16(bg); | |
1005 | unsigned int h, w; | |
1006 | ||
1007 | for (h = 0; h < height; h++) { | |
1008 | uint32_t mask = 1 << 31; | |
1009 | uint32_t line = be32_to_cpup(image); | |
1010 | ||
1011 | for (w = 0; w < width; w++) { | |
1012 | cursor[w] = (line & mask) ? _fg : _bg; | |
1013 | mask >>= 1; | |
1014 | } | |
1015 | ||
1016 | cursor += MAX_CURS; | |
1017 | image += DIV_ROUND_UP(width, 8); | |
1018 | } | |
1019 | } | |
1020 | ||
1021 | /* | |
1022 | * Set a hardware cursor. The image data for the cursor is passed via the | |
1023 | * fb_cursor object. | |
1024 | */ | |
1025 | static int fsl_diu_cursor(struct fb_info *info, struct fb_cursor *cursor) | |
1026 | { | |
1027 | struct mfb_info *mfbi = info->par; | |
1028 | struct fsl_diu_data *data = mfbi->parent; | |
1029 | struct diu __iomem *hw = data->diu_reg; | |
1030 | ||
1031 | if (cursor->image.width > MAX_CURS || cursor->image.height > MAX_CURS) | |
1032 | return -EINVAL; | |
1033 | ||
1034 | /* The cursor size has changed */ | |
1035 | if (cursor->set & FB_CUR_SETSIZE) { | |
1036 | /* | |
1037 | * The DIU cursor is a fixed size, so when we get this | |
1038 | * message, instead of resizing the cursor, we just clear | |
1039 | * all the image data, in expectation of new data. However, | |
1040 | * in tests this control does not appear to be normally | |
1041 | * called. | |
1042 | */ | |
1043 | memset(data->cursor, 0, sizeof(data->cursor)); | |
1044 | } | |
1045 | ||
1046 | /* The cursor position has changed (cursor->image.dx|dy) */ | |
1047 | if (cursor->set & FB_CUR_SETPOS) { | |
1048 | uint32_t xx, yy; | |
1049 | ||
1050 | yy = (cursor->image.dy - info->var.yoffset) & 0x7ff; | |
1051 | xx = (cursor->image.dx - info->var.xoffset) & 0x7ff; | |
1052 | ||
1053 | out_be32(&hw->curs_pos, yy << 16 | xx); | |
1054 | } | |
1055 | ||
1056 | /* | |
1057 | * FB_CUR_SETIMAGE - the cursor image has changed | |
1058 | * FB_CUR_SETCMAP - the cursor colors has changed | |
1059 | * FB_CUR_SETSHAPE - the cursor bitmask has changed | |
1060 | */ | |
1061 | if (cursor->set & (FB_CUR_SETSHAPE | FB_CUR_SETCMAP | FB_CUR_SETIMAGE)) { | |
1062 | unsigned int image_size = | |
1063 | DIV_ROUND_UP(cursor->image.width, 8) * cursor->image.height; | |
1064 | unsigned int image_words = | |
1065 | DIV_ROUND_UP(image_size, sizeof(uint32_t)); | |
1066 | unsigned int bg_idx = cursor->image.bg_color; | |
1067 | unsigned int fg_idx = cursor->image.fg_color; | |
1068 | uint8_t buffer[image_size]; | |
1069 | uint32_t *image, *source, *mask; | |
1070 | uint16_t fg, bg; | |
1071 | unsigned int i; | |
1072 | ||
1073 | if (info->state != FBINFO_STATE_RUNNING) | |
1074 | return 0; | |
1075 | ||
1076 | /* | |
1077 | * Determine the size of the cursor image data. Normally, | |
1078 | * it's 8x16. | |
1079 | */ | |
1080 | image_size = DIV_ROUND_UP(cursor->image.width, 8) * | |
1081 | cursor->image.height; | |
1082 | ||
1083 | bg = ((info->cmap.red[bg_idx] & 0xf8) << 7) | | |
1084 | ((info->cmap.green[bg_idx] & 0xf8) << 2) | | |
1085 | ((info->cmap.blue[bg_idx] & 0xf8) >> 3) | | |
1086 | 1 << 15; | |
1087 | ||
1088 | fg = ((info->cmap.red[fg_idx] & 0xf8) << 7) | | |
1089 | ((info->cmap.green[fg_idx] & 0xf8) << 2) | | |
1090 | ((info->cmap.blue[fg_idx] & 0xf8) >> 3) | | |
1091 | 1 << 15; | |
1092 | ||
1093 | /* Use 32-bit operations on the data to improve performance */ | |
1094 | image = (uint32_t *)buffer; | |
1095 | source = (uint32_t *)cursor->image.data; | |
1096 | mask = (uint32_t *)cursor->mask; | |
1097 | ||
1098 | if (cursor->rop == ROP_XOR) | |
1099 | for (i = 0; i < image_words; i++) | |
1100 | image[i] = source[i] ^ mask[i]; | |
1101 | else | |
1102 | for (i = 0; i < image_words; i++) | |
1103 | image[i] = source[i] & mask[i]; | |
1104 | ||
1105 | fsl_diu_load_cursor_image(info, image, bg, fg, | |
1106 | cursor->image.width, cursor->image.height); | |
cf6ac4ce | 1107 | } |
38dd2daf TT |
1108 | |
1109 | /* | |
1110 | * Show or hide the cursor. The cursor data is always stored in the | |
1111 | * 'cursor' memory block, and the actual cursor position is always in | |
1112 | * the DIU's CURS_POS register. To hide the cursor, we redirect the | |
1113 | * CURSOR register to a blank cursor. The show the cursor, we | |
1114 | * redirect the CURSOR register to the real cursor data. | |
1115 | */ | |
1116 | if (cursor->enable) | |
1117 | out_be32(&hw->cursor, DMA_ADDR(data, cursor)); | |
1118 | else | |
1119 | out_be32(&hw->cursor, DMA_ADDR(data, blank_cursor)); | |
1120 | ||
1121 | return 0; | |
1122 | } | |
1123 | ||
9b53a9e2 YS |
1124 | /* |
1125 | * Using the fb_var_screeninfo in fb_info we set the resolution of this | |
1126 | * particular framebuffer. This function alters the fb_fix_screeninfo stored | |
1127 | * in fb_info. It does not alter var in fb_info since we are using that | |
1128 | * data. This means we depend on the data in var inside fb_info to be | |
1129 | * supported by the hardware. fsl_diu_check_var is always called before | |
1130 | * fsl_diu_set_par to ensure this. | |
1131 | */ | |
1132 | static int fsl_diu_set_par(struct fb_info *info) | |
1133 | { | |
1134 | unsigned long len; | |
1135 | struct fb_var_screeninfo *var = &info->var; | |
1136 | struct mfb_info *mfbi = info->par; | |
b7795052 | 1137 | struct fsl_diu_data *data = mfbi->parent; |
9b53a9e2 | 1138 | struct diu_ad *ad = mfbi->ad; |
3c755b7c | 1139 | struct diu __iomem *hw; |
9b53a9e2 | 1140 | |
b7795052 | 1141 | hw = data->diu_reg; |
9b53a9e2 YS |
1142 | |
1143 | set_fix(info); | |
9b53a9e2 YS |
1144 | |
1145 | len = info->var.yres_virtual * info->fix.line_length; | |
1146 | /* Alloc & dealloc each time resolution/bpp change */ | |
1147 | if (len != info->fix.smem_len) { | |
1148 | if (info->fix.smem_start) | |
1149 | unmap_video_memory(info); | |
9b53a9e2 YS |
1150 | |
1151 | /* Memory allocation for framebuffer */ | |
1152 | if (map_video_memory(info)) { | |
154152ae | 1153 | dev_err(info->dev, "unable to allocate fb memory 1\n"); |
9b53a9e2 YS |
1154 | return -ENOMEM; |
1155 | } | |
1156 | } | |
1157 | ||
e09a8c3a TT |
1158 | if (diu_ops.get_pixel_format) |
1159 | ad->pix_fmt = diu_ops.get_pixel_format(data->monitor_port, | |
1160 | var->bits_per_pixel); | |
1161 | else | |
1162 | ad->pix_fmt = fsl_diu_get_pixel_format(var->bits_per_pixel); | |
1163 | ||
9b53a9e2 | 1164 | ad->addr = cpu_to_le32(info->fix.smem_start); |
ae5591e3 YS |
1165 | ad->src_size_g_alpha = cpu_to_le32((var->yres_virtual << 12) | |
1166 | var->xres_virtual) | mfbi->g_alpha; | |
1167 | /* AOI should not be greater than display size */ | |
9b53a9e2 | 1168 | ad->aoi_size = cpu_to_le32((var->yres << 16) | var->xres); |
ae5591e3 | 1169 | ad->offset_xyi = cpu_to_le32((var->yoffset << 16) | var->xoffset); |
9b53a9e2 YS |
1170 | ad->offset_xyd = cpu_to_le32((mfbi->y_aoi_d << 16) | mfbi->x_aoi_d); |
1171 | ||
1172 | /* Disable chroma keying function */ | |
1173 | ad->ckmax_r = 0; | |
1174 | ad->ckmax_g = 0; | |
1175 | ad->ckmax_b = 0; | |
1176 | ||
1177 | ad->ckmin_r = 255; | |
1178 | ad->ckmin_g = 255; | |
1179 | ad->ckmin_b = 255; | |
1180 | ||
2572df91 | 1181 | if (mfbi->index == PLANE0) |
9b53a9e2 YS |
1182 | update_lcdc(info); |
1183 | return 0; | |
1184 | } | |
1185 | ||
1186 | static inline __u32 CNVT_TOHW(__u32 val, __u32 width) | |
1187 | { | |
4a85dc8b | 1188 | return ((val << width) + 0x7FFF - val) >> 16; |
9b53a9e2 YS |
1189 | } |
1190 | ||
1191 | /* | |
1192 | * Set a single color register. The values supplied have a 16 bit magnitude | |
1193 | * which needs to be scaled in this function for the hardware. Things to take | |
1194 | * into consideration are how many color registers, if any, are supported with | |
1195 | * the current color visual. With truecolor mode no color palettes are | |
25985edc | 1196 | * supported. Here a pseudo palette is created which we store the value in |
9b53a9e2 YS |
1197 | * pseudo_palette in struct fb_info. For pseudocolor mode we have a limited |
1198 | * color palette. | |
1199 | */ | |
4a85dc8b TT |
1200 | static int fsl_diu_setcolreg(unsigned int regno, unsigned int red, |
1201 | unsigned int green, unsigned int blue, | |
1202 | unsigned int transp, struct fb_info *info) | |
9b53a9e2 YS |
1203 | { |
1204 | int ret = 1; | |
1205 | ||
1206 | /* | |
1207 | * If greyscale is true, then we convert the RGB value | |
1208 | * to greyscale no matter what visual we are using. | |
1209 | */ | |
1210 | if (info->var.grayscale) | |
1211 | red = green = blue = (19595 * red + 38470 * green + | |
1212 | 7471 * blue) >> 16; | |
1213 | switch (info->fix.visual) { | |
1214 | case FB_VISUAL_TRUECOLOR: | |
1215 | /* | |
1216 | * 16-bit True Colour. We encode the RGB value | |
1217 | * according to the RGB bitfield information. | |
1218 | */ | |
1219 | if (regno < 16) { | |
1220 | u32 *pal = info->pseudo_palette; | |
1221 | u32 v; | |
1222 | ||
1223 | red = CNVT_TOHW(red, info->var.red.length); | |
1224 | green = CNVT_TOHW(green, info->var.green.length); | |
1225 | blue = CNVT_TOHW(blue, info->var.blue.length); | |
1226 | transp = CNVT_TOHW(transp, info->var.transp.length); | |
1227 | ||
1228 | v = (red << info->var.red.offset) | | |
1229 | (green << info->var.green.offset) | | |
1230 | (blue << info->var.blue.offset) | | |
1231 | (transp << info->var.transp.offset); | |
1232 | ||
1233 | pal[regno] = v; | |
1234 | ret = 0; | |
1235 | } | |
1236 | break; | |
9b53a9e2 YS |
1237 | } |
1238 | ||
1239 | return ret; | |
1240 | } | |
1241 | ||
1242 | /* | |
1243 | * Pan (or wrap, depending on the `vmode' field) the display using the | |
1244 | * 'xoffset' and 'yoffset' fields of the 'var' structure. If the values | |
1245 | * don't fit, return -EINVAL. | |
1246 | */ | |
1247 | static int fsl_diu_pan_display(struct fb_var_screeninfo *var, | |
1248 | struct fb_info *info) | |
1249 | { | |
1250 | if ((info->var.xoffset == var->xoffset) && | |
1251 | (info->var.yoffset == var->yoffset)) | |
1252 | return 0; /* No change, do nothing */ | |
1253 | ||
1254 | if (var->xoffset < 0 || var->yoffset < 0 | |
1255 | || var->xoffset + info->var.xres > info->var.xres_virtual | |
1256 | || var->yoffset + info->var.yres > info->var.yres_virtual) | |
1257 | return -EINVAL; | |
1258 | ||
1259 | info->var.xoffset = var->xoffset; | |
1260 | info->var.yoffset = var->yoffset; | |
1261 | ||
1262 | if (var->vmode & FB_VMODE_YWRAP) | |
1263 | info->var.vmode |= FB_VMODE_YWRAP; | |
1264 | else | |
1265 | info->var.vmode &= ~FB_VMODE_YWRAP; | |
1266 | ||
ae5591e3 YS |
1267 | fsl_diu_set_aoi(info); |
1268 | ||
9b53a9e2 YS |
1269 | return 0; |
1270 | } | |
1271 | ||
9b53a9e2 YS |
1272 | static int fsl_diu_ioctl(struct fb_info *info, unsigned int cmd, |
1273 | unsigned long arg) | |
1274 | { | |
1275 | struct mfb_info *mfbi = info->par; | |
1276 | struct diu_ad *ad = mfbi->ad; | |
1277 | struct mfb_chroma_key ck; | |
1278 | unsigned char global_alpha; | |
1279 | struct aoi_display_offset aoi_d; | |
1280 | __u32 pix_fmt; | |
1281 | void __user *buf = (void __user *)arg; | |
1282 | ||
1283 | if (!arg) | |
1284 | return -EINVAL; | |
5cc2a36f TT |
1285 | |
1286 | dev_dbg(info->dev, "ioctl %08x (dir=%s%s type=%u nr=%u size=%u)\n", cmd, | |
1287 | _IOC_DIR(cmd) & _IOC_READ ? "R" : "", | |
1288 | _IOC_DIR(cmd) & _IOC_WRITE ? "W" : "", | |
1289 | _IOC_TYPE(cmd), _IOC_NR(cmd), _IOC_SIZE(cmd)); | |
1290 | ||
9b53a9e2 | 1291 | switch (cmd) { |
36b0b1d4 TT |
1292 | case MFB_SET_PIXFMT_OLD: |
1293 | dev_warn(info->dev, | |
1294 | "MFB_SET_PIXFMT value of 0x%08x is deprecated.\n", | |
1295 | MFB_SET_PIXFMT_OLD); | |
9b53a9e2 YS |
1296 | case MFB_SET_PIXFMT: |
1297 | if (copy_from_user(&pix_fmt, buf, sizeof(pix_fmt))) | |
1298 | return -EFAULT; | |
1299 | ad->pix_fmt = pix_fmt; | |
9b53a9e2 | 1300 | break; |
36b0b1d4 TT |
1301 | case MFB_GET_PIXFMT_OLD: |
1302 | dev_warn(info->dev, | |
1303 | "MFB_GET_PIXFMT value of 0x%08x is deprecated.\n", | |
1304 | MFB_GET_PIXFMT_OLD); | |
9b53a9e2 YS |
1305 | case MFB_GET_PIXFMT: |
1306 | pix_fmt = ad->pix_fmt; | |
1307 | if (copy_to_user(buf, &pix_fmt, sizeof(pix_fmt))) | |
1308 | return -EFAULT; | |
9b53a9e2 YS |
1309 | break; |
1310 | case MFB_SET_AOID: | |
1311 | if (copy_from_user(&aoi_d, buf, sizeof(aoi_d))) | |
1312 | return -EFAULT; | |
1313 | mfbi->x_aoi_d = aoi_d.x_aoi_d; | |
1314 | mfbi->y_aoi_d = aoi_d.y_aoi_d; | |
9b53a9e2 | 1315 | fsl_diu_check_var(&info->var, info); |
ae5591e3 | 1316 | fsl_diu_set_aoi(info); |
9b53a9e2 YS |
1317 | break; |
1318 | case MFB_GET_AOID: | |
1319 | aoi_d.x_aoi_d = mfbi->x_aoi_d; | |
1320 | aoi_d.y_aoi_d = mfbi->y_aoi_d; | |
1321 | if (copy_to_user(buf, &aoi_d, sizeof(aoi_d))) | |
1322 | return -EFAULT; | |
9b53a9e2 YS |
1323 | break; |
1324 | case MFB_GET_ALPHA: | |
1325 | global_alpha = mfbi->g_alpha; | |
1326 | if (copy_to_user(buf, &global_alpha, sizeof(global_alpha))) | |
1327 | return -EFAULT; | |
9b53a9e2 YS |
1328 | break; |
1329 | case MFB_SET_ALPHA: | |
1330 | /* set panel information */ | |
1331 | if (copy_from_user(&global_alpha, buf, sizeof(global_alpha))) | |
1332 | return -EFAULT; | |
1333 | ad->src_size_g_alpha = (ad->src_size_g_alpha & (~0xff)) | | |
1334 | (global_alpha & 0xff); | |
1335 | mfbi->g_alpha = global_alpha; | |
9b53a9e2 YS |
1336 | break; |
1337 | case MFB_SET_CHROMA_KEY: | |
1338 | /* set panel winformation */ | |
1339 | if (copy_from_user(&ck, buf, sizeof(ck))) | |
1340 | return -EFAULT; | |
1341 | ||
1342 | if (ck.enable && | |
1343 | (ck.red_max < ck.red_min || | |
1344 | ck.green_max < ck.green_min || | |
1345 | ck.blue_max < ck.blue_min)) | |
1346 | return -EINVAL; | |
1347 | ||
1348 | if (!ck.enable) { | |
1349 | ad->ckmax_r = 0; | |
1350 | ad->ckmax_g = 0; | |
1351 | ad->ckmax_b = 0; | |
1352 | ad->ckmin_r = 255; | |
1353 | ad->ckmin_g = 255; | |
1354 | ad->ckmin_b = 255; | |
1355 | } else { | |
1356 | ad->ckmax_r = ck.red_max; | |
1357 | ad->ckmax_g = ck.green_max; | |
1358 | ad->ckmax_b = ck.blue_max; | |
1359 | ad->ckmin_r = ck.red_min; | |
1360 | ad->ckmin_g = ck.green_min; | |
1361 | ad->ckmin_b = ck.blue_min; | |
1362 | } | |
9b53a9e2 | 1363 | break; |
e95c17e9 TT |
1364 | #ifdef CONFIG_PPC_MPC512x |
1365 | case MFB_SET_GAMMA: { | |
1366 | struct fsl_diu_data *data = mfbi->parent; | |
1367 | ||
1368 | if (copy_from_user(data->gamma, buf, sizeof(data->gamma))) | |
1369 | return -EFAULT; | |
1370 | setbits32(&data->diu_reg->gamma, 0); /* Force table reload */ | |
1371 | break; | |
1372 | } | |
1373 | case MFB_GET_GAMMA: { | |
1374 | struct fsl_diu_data *data = mfbi->parent; | |
1375 | ||
1376 | if (copy_to_user(buf, data->gamma, sizeof(data->gamma))) | |
1377 | return -EFAULT; | |
1378 | break; | |
1379 | } | |
1380 | #endif | |
9b53a9e2 | 1381 | default: |
154152ae | 1382 | dev_err(info->dev, "unknown ioctl command (0x%08X)\n", cmd); |
9b53a9e2 YS |
1383 | return -ENOIOCTLCMD; |
1384 | } | |
1385 | ||
1386 | return 0; | |
1387 | } | |
1388 | ||
b2639b5f AG |
1389 | static inline void fsl_diu_enable_interrupts(struct fsl_diu_data *data) |
1390 | { | |
1391 | u32 int_mask = INT_UNDRUN; /* enable underrun detection */ | |
1392 | ||
1393 | if (IS_ENABLED(CONFIG_NOT_COHERENT_CACHE)) | |
1394 | int_mask |= INT_VSYNC; /* enable vertical sync */ | |
1395 | ||
1396 | clrbits32(&data->diu_reg->int_mask, int_mask); | |
1397 | } | |
1398 | ||
9b53a9e2 YS |
1399 | /* turn on fb if count == 1 |
1400 | */ | |
1401 | static int fsl_diu_open(struct fb_info *info, int user) | |
1402 | { | |
1403 | struct mfb_info *mfbi = info->par; | |
1404 | int res = 0; | |
1405 | ||
4b5006ec | 1406 | /* free boot splash memory on first /dev/fb0 open */ |
2572df91 | 1407 | if ((mfbi->index == PLANE0) && diu_ops.release_bootmem) |
4b5006ec AG |
1408 | diu_ops.release_bootmem(); |
1409 | ||
9b53a9e2 YS |
1410 | spin_lock(&diu_lock); |
1411 | mfbi->count++; | |
1412 | if (mfbi->count == 1) { | |
9b53a9e2 YS |
1413 | fsl_diu_check_var(&info->var, info); |
1414 | res = fsl_diu_set_par(info); | |
1415 | if (res < 0) | |
1416 | mfbi->count--; | |
f74de500 | 1417 | else { |
b2639b5f | 1418 | fsl_diu_enable_interrupts(mfbi->parent); |
7e47c211 | 1419 | fsl_diu_enable_panel(info); |
f74de500 | 1420 | } |
9b53a9e2 YS |
1421 | } |
1422 | ||
1423 | spin_unlock(&diu_lock); | |
1424 | return res; | |
1425 | } | |
1426 | ||
1427 | /* turn off fb if count == 0 | |
1428 | */ | |
1429 | static int fsl_diu_release(struct fb_info *info, int user) | |
1430 | { | |
1431 | struct mfb_info *mfbi = info->par; | |
1432 | int res = 0; | |
1433 | ||
1434 | spin_lock(&diu_lock); | |
1435 | mfbi->count--; | |
f74de500 TT |
1436 | if (mfbi->count == 0) { |
1437 | struct fsl_diu_data *data = mfbi->parent; | |
b2639b5f AG |
1438 | bool disable = true; |
1439 | int i; | |
f74de500 | 1440 | |
b2639b5f AG |
1441 | /* Disable interrupts only if all AOIs are closed */ |
1442 | for (i = 0; i < NUM_AOIS; i++) { | |
1443 | struct mfb_info *mi = data->fsl_diu_info[i].par; | |
1444 | ||
1445 | if (mi->count) | |
1446 | disable = false; | |
1447 | } | |
1448 | if (disable) | |
1449 | out_be32(&data->diu_reg->int_mask, 0xffffffff); | |
2572df91 | 1450 | fsl_diu_disable_panel(info); |
f74de500 | 1451 | } |
2572df91 | 1452 | |
9b53a9e2 YS |
1453 | spin_unlock(&diu_lock); |
1454 | return res; | |
1455 | } | |
1456 | ||
1457 | static struct fb_ops fsl_diu_ops = { | |
1458 | .owner = THIS_MODULE, | |
1459 | .fb_check_var = fsl_diu_check_var, | |
1460 | .fb_set_par = fsl_diu_set_par, | |
1461 | .fb_setcolreg = fsl_diu_setcolreg, | |
9b53a9e2 YS |
1462 | .fb_pan_display = fsl_diu_pan_display, |
1463 | .fb_fillrect = cfb_fillrect, | |
1464 | .fb_copyarea = cfb_copyarea, | |
1465 | .fb_imageblit = cfb_imageblit, | |
1466 | .fb_ioctl = fsl_diu_ioctl, | |
1467 | .fb_open = fsl_diu_open, | |
1468 | .fb_release = fsl_diu_release, | |
38dd2daf | 1469 | .fb_cursor = fsl_diu_cursor, |
9b53a9e2 YS |
1470 | }; |
1471 | ||
48c68c4f | 1472 | static int install_fb(struct fb_info *info) |
9b53a9e2 YS |
1473 | { |
1474 | int rc; | |
1475 | struct mfb_info *mfbi = info->par; | |
e7b42718 | 1476 | struct fsl_diu_data *data = mfbi->parent; |
9b53a9e2 | 1477 | const char *aoi_mode, *init_aoi_mode = "320x240"; |
8b856f04 AG |
1478 | struct fb_videomode *db = fsl_diu_mode_db; |
1479 | unsigned int dbsize = ARRAY_SIZE(fsl_diu_mode_db); | |
1480 | int has_default_mode = 1; | |
9b53a9e2 | 1481 | |
f934fbd6 TT |
1482 | info->var.activate = FB_ACTIVATE_NOW; |
1483 | info->fbops = &fsl_diu_ops; | |
934dbeeb TT |
1484 | info->flags = FBINFO_DEFAULT | FBINFO_VIRTFB | FBINFO_PARTIAL_PAN_OK | |
1485 | FBINFO_READS_FAST; | |
f934fbd6 TT |
1486 | info->pseudo_palette = mfbi->pseudo_palette; |
1487 | ||
1488 | rc = fb_alloc_cmap(&info->cmap, 16, 0); | |
1489 | if (rc) | |
1490 | return rc; | |
9b53a9e2 | 1491 | |
2572df91 | 1492 | if (mfbi->index == PLANE0) { |
e7b42718 | 1493 | if (data->has_edid) { |
8b856f04 | 1494 | /* Now build modedb from EDID */ |
e7b42718 | 1495 | fb_edid_to_monspecs(data->edid_data, &info->monspecs); |
8b856f04 AG |
1496 | fb_videomode_to_modelist(info->monspecs.modedb, |
1497 | info->monspecs.modedb_len, | |
1498 | &info->modelist); | |
1499 | db = info->monspecs.modedb; | |
1500 | dbsize = info->monspecs.modedb_len; | |
1501 | } | |
9b53a9e2 | 1502 | aoi_mode = fb_mode; |
8b856f04 | 1503 | } else { |
9b53a9e2 | 1504 | aoi_mode = init_aoi_mode; |
8b856f04 | 1505 | } |
63cf8df4 TT |
1506 | rc = fb_find_mode(&info->var, info, aoi_mode, db, dbsize, NULL, |
1507 | default_bpp); | |
154152ae | 1508 | if (!rc) { |
8b856f04 AG |
1509 | /* |
1510 | * For plane 0 we continue and look into | |
1511 | * driver's internal modedb. | |
1512 | */ | |
e7b42718 | 1513 | if ((mfbi->index == PLANE0) && data->has_edid) |
8b856f04 AG |
1514 | has_default_mode = 0; |
1515 | else | |
1516 | return -EINVAL; | |
9b53a9e2 YS |
1517 | } |
1518 | ||
8b856f04 AG |
1519 | if (!has_default_mode) { |
1520 | rc = fb_find_mode(&info->var, info, aoi_mode, fsl_diu_mode_db, | |
63cf8df4 TT |
1521 | ARRAY_SIZE(fsl_diu_mode_db), NULL, default_bpp); |
1522 | if (rc) | |
8b856f04 AG |
1523 | has_default_mode = 1; |
1524 | } | |
1525 | ||
1526 | /* Still not found, use preferred mode from database if any */ | |
1527 | if (!has_default_mode && info->monspecs.modedb) { | |
1528 | struct fb_monspecs *specs = &info->monspecs; | |
1529 | struct fb_videomode *modedb = &specs->modedb[0]; | |
1530 | ||
1531 | /* | |
1532 | * Get preferred timing. If not found, | |
1533 | * first mode in database will be used. | |
1534 | */ | |
1535 | if (specs->misc & FB_MISC_1ST_DETAIL) { | |
1536 | int i; | |
1537 | ||
1538 | for (i = 0; i < specs->modedb_len; i++) { | |
1539 | if (specs->modedb[i].flag & FB_MODE_IS_FIRST) { | |
1540 | modedb = &specs->modedb[i]; | |
1541 | break; | |
1542 | } | |
1543 | } | |
1544 | } | |
1545 | ||
1546 | info->var.bits_per_pixel = default_bpp; | |
1547 | fb_videomode_to_var(&info->var, modedb); | |
1548 | } | |
1549 | ||
9b53a9e2 | 1550 | if (fsl_diu_check_var(&info->var, info)) { |
154152ae | 1551 | dev_err(info->dev, "fsl_diu_check_var failed\n"); |
589c7971 | 1552 | unmap_video_memory(info); |
9b53a9e2 YS |
1553 | fb_dealloc_cmap(&info->cmap); |
1554 | return -EINVAL; | |
1555 | } | |
1556 | ||
9b53a9e2 | 1557 | if (register_framebuffer(info) < 0) { |
154152ae | 1558 | dev_err(info->dev, "register_framebuffer failed\n"); |
9b53a9e2 YS |
1559 | unmap_video_memory(info); |
1560 | fb_dealloc_cmap(&info->cmap); | |
1561 | return -EINVAL; | |
1562 | } | |
1563 | ||
1564 | mfbi->registered = 1; | |
154152ae | 1565 | dev_info(info->dev, "%s registered successfully\n", mfbi->id); |
9b53a9e2 YS |
1566 | |
1567 | return 0; | |
1568 | } | |
1569 | ||
05946bce | 1570 | static void uninstall_fb(struct fb_info *info) |
9b53a9e2 YS |
1571 | { |
1572 | struct mfb_info *mfbi = info->par; | |
1573 | ||
1574 | if (!mfbi->registered) | |
1575 | return; | |
1576 | ||
1577 | unregister_framebuffer(info); | |
1578 | unmap_video_memory(info); | |
1579 | if (&info->cmap) | |
1580 | fb_dealloc_cmap(&info->cmap); | |
1581 | ||
1582 | mfbi->registered = 0; | |
1583 | } | |
1584 | ||
1585 | static irqreturn_t fsl_diu_isr(int irq, void *dev_id) | |
1586 | { | |
3c755b7c | 1587 | struct diu __iomem *hw = dev_id; |
f74de500 | 1588 | uint32_t status = in_be32(&hw->int_status); |
9b53a9e2 YS |
1589 | |
1590 | if (status) { | |
1591 | /* This is the workaround for underrun */ | |
1592 | if (status & INT_UNDRUN) { | |
1593 | out_be32(&hw->diu_mode, 0); | |
9b53a9e2 YS |
1594 | udelay(1); |
1595 | out_be32(&hw->diu_mode, 1); | |
1596 | } | |
1597 | #if defined(CONFIG_NOT_COHERENT_CACHE) | |
1598 | else if (status & INT_VSYNC) { | |
1599 | unsigned int i; | |
4a85dc8b | 1600 | |
9b53a9e2 YS |
1601 | for (i = 0; i < coherence_data_size; |
1602 | i += d_cache_line_size) | |
1603 | __asm__ __volatile__ ( | |
1604 | "dcbz 0, %[input]" | |
1605 | ::[input]"r"(&coherence_data[i])); | |
1606 | } | |
1607 | #endif | |
1608 | return IRQ_HANDLED; | |
1609 | } | |
1610 | return IRQ_NONE; | |
1611 | } | |
1612 | ||
9b53a9e2 YS |
1613 | #ifdef CONFIG_PM |
1614 | /* | |
1615 | * Power management hooks. Note that we won't be called from IRQ context, | |
1616 | * unlike the blank functions above, so we may sleep. | |
1617 | */ | |
2dc11581 | 1618 | static int fsl_diu_suspend(struct platform_device *ofdev, pm_message_t state) |
9b53a9e2 | 1619 | { |
b7795052 | 1620 | struct fsl_diu_data *data; |
9b53a9e2 | 1621 | |
b7795052 | 1622 | data = dev_get_drvdata(&ofdev->dev); |
f7f5ef0a | 1623 | disable_lcdc(data->fsl_diu_info); |
9b53a9e2 YS |
1624 | |
1625 | return 0; | |
1626 | } | |
1627 | ||
2dc11581 | 1628 | static int fsl_diu_resume(struct platform_device *ofdev) |
9b53a9e2 | 1629 | { |
b7795052 | 1630 | struct fsl_diu_data *data; |
e03dc19b | 1631 | unsigned int i; |
9b53a9e2 | 1632 | |
b7795052 | 1633 | data = dev_get_drvdata(&ofdev->dev); |
e03dc19b JJ |
1634 | |
1635 | fsl_diu_enable_interrupts(data); | |
1636 | update_lcdc(data->fsl_diu_info); | |
1637 | for (i = 0; i < NUM_AOIS; i++) { | |
1638 | if (data->mfb[i].count) | |
1639 | fsl_diu_enable_panel(&data->fsl_diu_info[i]); | |
1640 | } | |
9b53a9e2 YS |
1641 | |
1642 | return 0; | |
1643 | } | |
1644 | ||
1645 | #else | |
1646 | #define fsl_diu_suspend NULL | |
1647 | #define fsl_diu_resume NULL | |
1648 | #endif /* CONFIG_PM */ | |
1649 | ||
9b53a9e2 YS |
1650 | static ssize_t store_monitor(struct device *device, |
1651 | struct device_attribute *attr, const char *buf, size_t count) | |
1652 | { | |
7653aaab | 1653 | enum fsl_diu_monitor_port old_monitor_port; |
b7795052 | 1654 | struct fsl_diu_data *data = |
9b53a9e2 YS |
1655 | container_of(attr, struct fsl_diu_data, dev_attr); |
1656 | ||
b7795052 TT |
1657 | old_monitor_port = data->monitor_port; |
1658 | data->monitor_port = fsl_diu_name_to_port(buf); | |
9b53a9e2 | 1659 | |
b7795052 | 1660 | if (old_monitor_port != data->monitor_port) { |
9b53a9e2 YS |
1661 | /* All AOIs need adjust pixel format |
1662 | * fsl_diu_set_par only change the pixsel format here | |
1663 | * unlikely to fail. */ | |
ddd3d905 TT |
1664 | unsigned int i; |
1665 | ||
1666 | for (i=0; i < NUM_AOIS; i++) | |
b7795052 | 1667 | fsl_diu_set_par(&data->fsl_diu_info[i]); |
9b53a9e2 YS |
1668 | } |
1669 | return count; | |
1670 | } | |
1671 | ||
1672 | static ssize_t show_monitor(struct device *device, | |
1673 | struct device_attribute *attr, char *buf) | |
1674 | { | |
b7795052 | 1675 | struct fsl_diu_data *data = |
9b53a9e2 | 1676 | container_of(attr, struct fsl_diu_data, dev_attr); |
7653aaab | 1677 | |
b7795052 | 1678 | switch (data->monitor_port) { |
7653aaab TT |
1679 | case FSL_DIU_PORT_DVI: |
1680 | return sprintf(buf, "DVI\n"); | |
1681 | case FSL_DIU_PORT_LVDS: | |
1682 | return sprintf(buf, "Single-link LVDS\n"); | |
1683 | case FSL_DIU_PORT_DLVDS: | |
1684 | return sprintf(buf, "Dual-link LVDS\n"); | |
1685 | } | |
1686 | ||
1687 | return 0; | |
9b53a9e2 YS |
1688 | } |
1689 | ||
48c68c4f | 1690 | static int fsl_diu_probe(struct platform_device *pdev) |
9b53a9e2 | 1691 | { |
9e52ba61 | 1692 | struct device_node *np = pdev->dev.of_node; |
9b53a9e2 | 1693 | struct mfb_info *mfbi; |
b7795052 | 1694 | struct fsl_diu_data *data; |
b7795052 | 1695 | dma_addr_t dma_addr; /* DMA addr of fsl_diu_data struct */ |
e7b42718 | 1696 | const void *prop; |
ddd3d905 TT |
1697 | unsigned int i; |
1698 | int ret; | |
9b53a9e2 | 1699 | |
c1f383d9 DC |
1700 | data = dmam_alloc_coherent(&pdev->dev, sizeof(struct fsl_diu_data), |
1701 | &dma_addr, GFP_DMA | __GFP_ZERO); | |
b7795052 | 1702 | if (!data) |
9b53a9e2 | 1703 | return -ENOMEM; |
b7795052 | 1704 | data->dma_addr = dma_addr; |
ddd3d905 TT |
1705 | |
1706 | /* | |
1707 | * dma_alloc_coherent() uses a page allocator, so the address is | |
1708 | * always page-aligned. We need the memory to be 32-byte aligned, | |
1709 | * so that's good. However, if one day the allocator changes, we | |
1710 | * need to catch that. It's not worth the effort to handle unaligned | |
1711 | * alloctions now because it's highly unlikely to ever be a problem. | |
1712 | */ | |
b7795052 | 1713 | if ((unsigned long)data & 31) { |
ddd3d905 TT |
1714 | dev_err(&pdev->dev, "misaligned allocation"); |
1715 | ret = -ENOMEM; | |
1716 | goto error; | |
1717 | } | |
9b53a9e2 | 1718 | |
b7795052 | 1719 | spin_lock_init(&data->reg_lock); |
3c755b7c | 1720 | |
ddd3d905 | 1721 | for (i = 0; i < NUM_AOIS; i++) { |
b7795052 | 1722 | struct fb_info *info = &data->fsl_diu_info[i]; |
ddd3d905 TT |
1723 | |
1724 | info->device = &pdev->dev; | |
b7795052 | 1725 | info->par = &data->mfb[i]; |
ddd3d905 TT |
1726 | |
1727 | /* | |
1728 | * We store the physical address of the AD in the reserved | |
1729 | * 'paddr' field of the AD itself. | |
1730 | */ | |
b7795052 | 1731 | data->ad[i].paddr = DMA_ADDR(data, ad[i]); |
ddd3d905 TT |
1732 | |
1733 | info->fix.smem_start = 0; | |
1734 | ||
1735 | /* Initialize the AOI data structure */ | |
1736 | mfbi = info->par; | |
9b53a9e2 | 1737 | memcpy(mfbi, &mfb_template[i], sizeof(struct mfb_info)); |
b7795052 TT |
1738 | mfbi->parent = data; |
1739 | mfbi->ad = &data->ad[i]; | |
e7b42718 | 1740 | } |
8b856f04 | 1741 | |
e7b42718 TT |
1742 | /* Get the EDID data from the device tree, if present */ |
1743 | prop = of_get_property(np, "edid", &ret); | |
1744 | if (prop && ret == EDID_LENGTH) { | |
1745 | memcpy(data->edid_data, prop, EDID_LENGTH); | |
1746 | data->has_edid = true; | |
9b53a9e2 YS |
1747 | } |
1748 | ||
b7795052 TT |
1749 | data->diu_reg = of_iomap(np, 0); |
1750 | if (!data->diu_reg) { | |
9e52ba61 | 1751 | dev_err(&pdev->dev, "cannot map DIU registers\n"); |
9b53a9e2 | 1752 | ret = -EFAULT; |
ddd3d905 | 1753 | goto error; |
9b53a9e2 YS |
1754 | } |
1755 | ||
9b53a9e2 | 1756 | /* Get the IRQ of the DIU */ |
b7795052 | 1757 | data->irq = irq_of_parse_and_map(np, 0); |
9b53a9e2 | 1758 | |
b7795052 | 1759 | if (!data->irq) { |
9e52ba61 | 1760 | dev_err(&pdev->dev, "could not get DIU IRQ\n"); |
9b53a9e2 YS |
1761 | ret = -EINVAL; |
1762 | goto error; | |
1763 | } | |
b7795052 | 1764 | data->monitor_port = monitor_port; |
9b53a9e2 | 1765 | |
ddd3d905 | 1766 | /* Initialize the dummy Area Descriptor */ |
b7795052 TT |
1767 | data->dummy_ad.addr = cpu_to_le32(DMA_ADDR(data, dummy_aoi)); |
1768 | data->dummy_ad.pix_fmt = 0x88882317; | |
1769 | data->dummy_ad.src_size_g_alpha = cpu_to_le32((4 << 12) | 4); | |
1770 | data->dummy_ad.aoi_size = cpu_to_le32((4 << 16) | 2); | |
1771 | data->dummy_ad.offset_xyi = 0; | |
1772 | data->dummy_ad.offset_xyd = 0; | |
1773 | data->dummy_ad.next_ad = 0; | |
1774 | data->dummy_ad.paddr = DMA_ADDR(data, dummy_ad); | |
9b53a9e2 | 1775 | |
4b5006ec | 1776 | /* |
7af3b136 TT |
1777 | * Let DIU continue to display splash screen if it was pre-initialized |
1778 | * by the bootloader; otherwise, clear the display. | |
4b5006ec | 1779 | */ |
7af3b136 TT |
1780 | if (in_be32(&data->diu_reg->diu_mode) == MFB_MODE0) |
1781 | out_be32(&data->diu_reg->desc[0], 0); | |
ddd3d905 | 1782 | |
b7795052 TT |
1783 | out_be32(&data->diu_reg->desc[1], data->dummy_ad.paddr); |
1784 | out_be32(&data->diu_reg->desc[2], data->dummy_ad.paddr); | |
ddd3d905 | 1785 | |
f74de500 TT |
1786 | /* |
1787 | * Older versions of U-Boot leave interrupts enabled, so disable | |
1788 | * all of them and clear the status register. | |
1789 | */ | |
1790 | out_be32(&data->diu_reg->int_mask, 0xffffffff); | |
1791 | in_be32(&data->diu_reg->int_status); | |
1792 | ||
1793 | ret = request_irq(data->irq, fsl_diu_isr, 0, "fsl-diu-fb", | |
b2639b5f | 1794 | data->diu_reg); |
f74de500 | 1795 | if (ret) { |
9e52ba61 | 1796 | dev_err(&pdev->dev, "could not claim irq\n"); |
9b53a9e2 YS |
1797 | goto error; |
1798 | } | |
1799 | ||
b2639b5f AG |
1800 | for (i = 0; i < NUM_AOIS; i++) { |
1801 | ret = install_fb(&data->fsl_diu_info[i]); | |
1802 | if (ret) { | |
1803 | dev_err(&pdev->dev, "could not register fb %d\n", i); | |
1804 | free_irq(data->irq, data->diu_reg); | |
1805 | goto error; | |
1806 | } | |
1807 | } | |
1808 | ||
b7795052 TT |
1809 | sysfs_attr_init(&data->dev_attr.attr); |
1810 | data->dev_attr.attr.name = "monitor"; | |
1811 | data->dev_attr.attr.mode = S_IRUGO|S_IWUSR; | |
1812 | data->dev_attr.show = show_monitor; | |
1813 | data->dev_attr.store = store_monitor; | |
1814 | ret = device_create_file(&pdev->dev, &data->dev_attr); | |
ddd3d905 | 1815 | if (ret) { |
9e52ba61 | 1816 | dev_err(&pdev->dev, "could not create sysfs file %s\n", |
b7795052 | 1817 | data->dev_attr.attr.name); |
9b53a9e2 YS |
1818 | } |
1819 | ||
b7795052 | 1820 | dev_set_drvdata(&pdev->dev, data); |
9b53a9e2 YS |
1821 | return 0; |
1822 | ||
1823 | error: | |
ddd3d905 | 1824 | for (i = 0; i < NUM_AOIS; i++) |
b7795052 | 1825 | uninstall_fb(&data->fsl_diu_info[i]); |
ddd3d905 | 1826 | |
b7795052 | 1827 | iounmap(data->diu_reg); |
9b53a9e2 | 1828 | |
9b53a9e2 YS |
1829 | return ret; |
1830 | } | |
1831 | ||
9e52ba61 | 1832 | static int fsl_diu_remove(struct platform_device *pdev) |
9b53a9e2 | 1833 | { |
b7795052 | 1834 | struct fsl_diu_data *data; |
9b53a9e2 YS |
1835 | int i; |
1836 | ||
b7795052 TT |
1837 | data = dev_get_drvdata(&pdev->dev); |
1838 | disable_lcdc(&data->fsl_diu_info[0]); | |
f74de500 | 1839 | |
b2639b5f | 1840 | free_irq(data->irq, data->diu_reg); |
ddd3d905 TT |
1841 | |
1842 | for (i = 0; i < NUM_AOIS; i++) | |
b7795052 | 1843 | uninstall_fb(&data->fsl_diu_info[i]); |
ddd3d905 | 1844 | |
b7795052 | 1845 | iounmap(data->diu_reg); |
ddd3d905 | 1846 | |
9b53a9e2 YS |
1847 | return 0; |
1848 | } | |
1849 | ||
1850 | #ifndef MODULE | |
1851 | static int __init fsl_diu_setup(char *options) | |
1852 | { | |
1853 | char *opt; | |
1854 | unsigned long val; | |
1855 | ||
1856 | if (!options || !*options) | |
1857 | return 0; | |
1858 | ||
1859 | while ((opt = strsep(&options, ",")) != NULL) { | |
1860 | if (!*opt) | |
1861 | continue; | |
1862 | if (!strncmp(opt, "monitor=", 8)) { | |
7653aaab | 1863 | monitor_port = fsl_diu_name_to_port(opt + 8); |
9b53a9e2 | 1864 | } else if (!strncmp(opt, "bpp=", 4)) { |
f5725af5 | 1865 | if (!kstrtoul(opt + 4, 10, &val)) |
9b53a9e2 YS |
1866 | default_bpp = val; |
1867 | } else | |
1868 | fb_mode = opt; | |
1869 | } | |
1870 | ||
1871 | return 0; | |
1872 | } | |
1873 | #endif | |
1874 | ||
1875 | static struct of_device_id fsl_diu_match[] = { | |
d24720a4 AG |
1876 | #ifdef CONFIG_PPC_MPC512x |
1877 | { | |
1878 | .compatible = "fsl,mpc5121-diu", | |
1879 | }, | |
1880 | #endif | |
9b53a9e2 YS |
1881 | { |
1882 | .compatible = "fsl,diu", | |
1883 | }, | |
1884 | {} | |
1885 | }; | |
1886 | MODULE_DEVICE_TABLE(of, fsl_diu_match); | |
1887 | ||
28541d0f | 1888 | static struct platform_driver fsl_diu_driver = { |
4018294b | 1889 | .driver = { |
f8c6bf6a | 1890 | .name = "fsl-diu-fb", |
4018294b GL |
1891 | .of_match_table = fsl_diu_match, |
1892 | }, | |
9b53a9e2 YS |
1893 | .probe = fsl_diu_probe, |
1894 | .remove = fsl_diu_remove, | |
1895 | .suspend = fsl_diu_suspend, | |
1896 | .resume = fsl_diu_resume, | |
1897 | }; | |
1898 | ||
1899 | static int __init fsl_diu_init(void) | |
1900 | { | |
1901 | #ifdef CONFIG_NOT_COHERENT_CACHE | |
1902 | struct device_node *np; | |
1903 | const u32 *prop; | |
1904 | #endif | |
1905 | int ret; | |
1906 | #ifndef MODULE | |
1907 | char *option; | |
1908 | ||
1909 | /* | |
1910 | * For kernel boot options (in 'video=xxxfb:<options>' format) | |
1911 | */ | |
1912 | if (fb_get_options("fslfb", &option)) | |
1913 | return -ENODEV; | |
1914 | fsl_diu_setup(option); | |
7653aaab TT |
1915 | #else |
1916 | monitor_port = fsl_diu_name_to_port(monitor_string); | |
9b53a9e2 | 1917 | #endif |
154152ae | 1918 | pr_info("Freescale Display Interface Unit (DIU) framebuffer driver\n"); |
9b53a9e2 YS |
1919 | |
1920 | #ifdef CONFIG_NOT_COHERENT_CACHE | |
1921 | np = of_find_node_by_type(NULL, "cpu"); | |
1922 | if (!np) { | |
154152ae | 1923 | pr_err("fsl-diu-fb: can't find 'cpu' device node\n"); |
9b53a9e2 YS |
1924 | return -ENODEV; |
1925 | } | |
1926 | ||
1927 | prop = of_get_property(np, "d-cache-size", NULL); | |
5394ba0f | 1928 | if (prop == NULL) { |
154152ae TT |
1929 | pr_err("fsl-diu-fb: missing 'd-cache-size' property' " |
1930 | "in 'cpu' node\n"); | |
5394ba0f | 1931 | of_node_put(np); |
9b53a9e2 | 1932 | return -ENODEV; |
5394ba0f | 1933 | } |
9b53a9e2 | 1934 | |
4a85dc8b TT |
1935 | /* |
1936 | * Freescale PLRU requires 13/8 times the cache size to do a proper | |
1937 | * displacement flush | |
9b53a9e2 | 1938 | */ |
9e52ba61 | 1939 | coherence_data_size = be32_to_cpup(prop) * 13; |
9b53a9e2 YS |
1940 | coherence_data_size /= 8; |
1941 | ||
5cc2a36f TT |
1942 | pr_debug("fsl-diu-fb: coherence data size is %zu bytes\n", |
1943 | coherence_data_size); | |
1944 | ||
9b53a9e2 | 1945 | prop = of_get_property(np, "d-cache-line-size", NULL); |
5394ba0f | 1946 | if (prop == NULL) { |
154152ae TT |
1947 | pr_err("fsl-diu-fb: missing 'd-cache-line-size' property' " |
1948 | "in 'cpu' node\n"); | |
5394ba0f | 1949 | of_node_put(np); |
9b53a9e2 | 1950 | return -ENODEV; |
5394ba0f | 1951 | } |
9e52ba61 | 1952 | d_cache_line_size = be32_to_cpup(prop); |
9b53a9e2 | 1953 | |
5cc2a36f TT |
1954 | pr_debug("fsl-diu-fb: cache lines size is %u bytes\n", |
1955 | d_cache_line_size); | |
1956 | ||
9b53a9e2 YS |
1957 | of_node_put(np); |
1958 | coherence_data = vmalloc(coherence_data_size); | |
5cc2a36f TT |
1959 | if (!coherence_data) { |
1960 | pr_err("fsl-diu-fb: could not allocate coherence data " | |
1961 | "(size=%zu)\n", coherence_data_size); | |
9b53a9e2 | 1962 | return -ENOMEM; |
5cc2a36f TT |
1963 | } |
1964 | ||
9b53a9e2 | 1965 | #endif |
4a85dc8b | 1966 | |
28541d0f | 1967 | ret = platform_driver_register(&fsl_diu_driver); |
9b53a9e2 | 1968 | if (ret) { |
154152ae | 1969 | pr_err("fsl-diu-fb: failed to register platform driver\n"); |
9b53a9e2 YS |
1970 | #if defined(CONFIG_NOT_COHERENT_CACHE) |
1971 | vfree(coherence_data); | |
1972 | #endif | |
9b53a9e2 YS |
1973 | } |
1974 | return ret; | |
1975 | } | |
1976 | ||
1977 | static void __exit fsl_diu_exit(void) | |
1978 | { | |
28541d0f | 1979 | platform_driver_unregister(&fsl_diu_driver); |
9b53a9e2 YS |
1980 | #if defined(CONFIG_NOT_COHERENT_CACHE) |
1981 | vfree(coherence_data); | |
1982 | #endif | |
1983 | } | |
1984 | ||
1985 | module_init(fsl_diu_init); | |
1986 | module_exit(fsl_diu_exit); | |
1987 | ||
1988 | MODULE_AUTHOR("York Sun <yorksun@freescale.com>"); | |
1989 | MODULE_DESCRIPTION("Freescale DIU framebuffer driver"); | |
1990 | MODULE_LICENSE("GPL"); | |
1991 | ||
1992 | module_param_named(mode, fb_mode, charp, 0); | |
1993 | MODULE_PARM_DESC(mode, | |
1994 | "Specify resolution as \"<xres>x<yres>[-<bpp>][@<refresh>]\" "); | |
1995 | module_param_named(bpp, default_bpp, ulong, 0); | |
154152ae | 1996 | MODULE_PARM_DESC(bpp, "Specify bit-per-pixel if not specified in 'mode'"); |
7653aaab TT |
1997 | module_param_named(monitor, monitor_string, charp, 0); |
1998 | MODULE_PARM_DESC(monitor, "Specify the monitor port " | |
1999 | "(\"dvi\", \"lvds\", or \"dlvds\") if supported by the platform"); | |
9b53a9e2 | 2000 |