]>
Commit | Line | Data |
---|---|---|
f0a523b5 SH |
1 | /* |
2 | * Copyright (C) 2010 Juergen Beisert, Pengutronix | |
3 | * | |
4 | * This code is based on: | |
5 | * Author: Vitaly Wool <vital@embeddedalley.com> | |
6 | * | |
7 | * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved. | |
8 | * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. | |
9 | * | |
10 | * This program is free software; you can redistribute it and/or | |
11 | * modify it under the terms of the GNU General Public License | |
12 | * as published by the Free Software Foundation; either version 2 | |
13 | * of the License, or (at your option) any later version. | |
14 | * This program is distributed in the hope that it will be useful, | |
15 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
16 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
17 | * GNU General Public License for more details. | |
18 | */ | |
19 | ||
20 | #define DRIVER_NAME "mxsfb" | |
21 | ||
22 | /** | |
23 | * @file | |
24 | * @brief LCDIF driver for i.MX23 and i.MX28 | |
25 | * | |
26 | * The LCDIF support four modes of operation | |
27 | * - MPU interface (to drive smart displays) -> not supported yet | |
28 | * - VSYNC interface (like MPU interface plus Vsync) -> not supported yet | |
29 | * - Dotclock interface (to drive LC displays with RGB data and sync signals) | |
30 | * - DVI (to drive ITU-R BT656) -> not supported yet | |
31 | * | |
32 | * This driver depends on a correct setup of the pins used for this purpose | |
33 | * (platform specific). | |
34 | * | |
35 | * For the developer: Don't forget to set the data bus width to the display | |
36 | * in the imx_fb_videomode structure. You will else end up with ugly colours. | |
37 | * If you fight against jitter you can vary the clock delay. This is a feature | |
38 | * of the i.MX28 and you can vary it between 2 ns ... 8 ns in 2 ns steps. Give | |
39 | * the required value in the imx_fb_videomode structure. | |
40 | */ | |
41 | ||
42 | #include <linux/kernel.h> | |
43 | #include <linux/platform_device.h> | |
44 | #include <linux/clk.h> | |
45 | #include <linux/dma-mapping.h> | |
46 | #include <linux/io.h> | |
47 | #include <mach/mxsfb.h> | |
48 | ||
49 | #define REG_SET 4 | |
50 | #define REG_CLR 8 | |
51 | ||
52 | #define LCDC_CTRL 0x00 | |
53 | #define LCDC_CTRL1 0x10 | |
54 | #define LCDC_V4_CTRL2 0x20 | |
55 | #define LCDC_V3_TRANSFER_COUNT 0x20 | |
56 | #define LCDC_V4_TRANSFER_COUNT 0x30 | |
57 | #define LCDC_V4_CUR_BUF 0x40 | |
58 | #define LCDC_V4_NEXT_BUF 0x50 | |
59 | #define LCDC_V3_CUR_BUF 0x30 | |
60 | #define LCDC_V3_NEXT_BUF 0x40 | |
61 | #define LCDC_TIMING 0x60 | |
62 | #define LCDC_VDCTRL0 0x70 | |
63 | #define LCDC_VDCTRL1 0x80 | |
64 | #define LCDC_VDCTRL2 0x90 | |
65 | #define LCDC_VDCTRL3 0xa0 | |
66 | #define LCDC_VDCTRL4 0xb0 | |
67 | #define LCDC_DVICTRL0 0xc0 | |
68 | #define LCDC_DVICTRL1 0xd0 | |
69 | #define LCDC_DVICTRL2 0xe0 | |
70 | #define LCDC_DVICTRL3 0xf0 | |
71 | #define LCDC_DVICTRL4 0x100 | |
72 | #define LCDC_V4_DATA 0x180 | |
73 | #define LCDC_V3_DATA 0x1b0 | |
74 | #define LCDC_V4_DEBUG0 0x1d0 | |
75 | #define LCDC_V3_DEBUG0 0x1f0 | |
76 | ||
77 | #define CTRL_SFTRST (1 << 31) | |
78 | #define CTRL_CLKGATE (1 << 30) | |
79 | #define CTRL_BYPASS_COUNT (1 << 19) | |
80 | #define CTRL_VSYNC_MODE (1 << 18) | |
81 | #define CTRL_DOTCLK_MODE (1 << 17) | |
82 | #define CTRL_DATA_SELECT (1 << 16) | |
83 | #define CTRL_SET_BUS_WIDTH(x) (((x) & 0x3) << 10) | |
84 | #define CTRL_GET_BUS_WIDTH(x) (((x) >> 10) & 0x3) | |
85 | #define CTRL_SET_WORD_LENGTH(x) (((x) & 0x3) << 8) | |
86 | #define CTRL_GET_WORD_LENGTH(x) (((x) >> 8) & 0x3) | |
87 | #define CTRL_MASTER (1 << 5) | |
88 | #define CTRL_DF16 (1 << 3) | |
89 | #define CTRL_DF18 (1 << 2) | |
90 | #define CTRL_DF24 (1 << 1) | |
91 | #define CTRL_RUN (1 << 0) | |
92 | ||
93 | #define CTRL1_FIFO_CLEAR (1 << 21) | |
94 | #define CTRL1_SET_BYTE_PACKAGING(x) (((x) & 0xf) << 16) | |
95 | #define CTRL1_GET_BYTE_PACKAGING(x) (((x) >> 16) & 0xf) | |
96 | ||
97 | #define TRANSFER_COUNT_SET_VCOUNT(x) (((x) & 0xffff) << 16) | |
98 | #define TRANSFER_COUNT_GET_VCOUNT(x) (((x) >> 16) & 0xffff) | |
99 | #define TRANSFER_COUNT_SET_HCOUNT(x) ((x) & 0xffff) | |
100 | #define TRANSFER_COUNT_GET_HCOUNT(x) ((x) & 0xffff) | |
101 | ||
102 | ||
103 | #define VDCTRL0_ENABLE_PRESENT (1 << 28) | |
104 | #define VDCTRL0_VSYNC_ACT_HIGH (1 << 27) | |
105 | #define VDCTRL0_HSYNC_ACT_HIGH (1 << 26) | |
106 | #define VDCTRL0_DOTCLK_ACT_FAILING (1 << 25) | |
107 | #define VDCTRL0_ENABLE_ACT_HIGH (1 << 24) | |
108 | #define VDCTRL0_VSYNC_PERIOD_UNIT (1 << 21) | |
109 | #define VDCTRL0_VSYNC_PULSE_WIDTH_UNIT (1 << 20) | |
110 | #define VDCTRL0_HALF_LINE (1 << 19) | |
111 | #define VDCTRL0_HALF_LINE_MODE (1 << 18) | |
112 | #define VDCTRL0_SET_VSYNC_PULSE_WIDTH(x) ((x) & 0x3ffff) | |
113 | #define VDCTRL0_GET_VSYNC_PULSE_WIDTH(x) ((x) & 0x3ffff) | |
114 | ||
115 | #define VDCTRL2_SET_HSYNC_PERIOD(x) ((x) & 0x3ffff) | |
116 | #define VDCTRL2_GET_HSYNC_PERIOD(x) ((x) & 0x3ffff) | |
117 | ||
118 | #define VDCTRL3_MUX_SYNC_SIGNALS (1 << 29) | |
119 | #define VDCTRL3_VSYNC_ONLY (1 << 28) | |
120 | #define SET_HOR_WAIT_CNT(x) (((x) & 0xfff) << 16) | |
121 | #define GET_HOR_WAIT_CNT(x) (((x) >> 16) & 0xfff) | |
122 | #define SET_VERT_WAIT_CNT(x) ((x) & 0xffff) | |
123 | #define GET_VERT_WAIT_CNT(x) ((x) & 0xffff) | |
124 | ||
125 | #define VDCTRL4_SET_DOTCLK_DLY(x) (((x) & 0x7) << 29) /* v4 only */ | |
126 | #define VDCTRL4_GET_DOTCLK_DLY(x) (((x) >> 29) & 0x7) /* v4 only */ | |
127 | #define VDCTRL4_SYNC_SIGNALS_ON (1 << 18) | |
128 | #define SET_DOTCLK_H_VALID_DATA_CNT(x) ((x) & 0x3ffff) | |
129 | ||
130 | #define DEBUG0_HSYNC (1 < 26) | |
131 | #define DEBUG0_VSYNC (1 < 25) | |
132 | ||
133 | #define MIN_XRES 120 | |
134 | #define MIN_YRES 120 | |
135 | ||
136 | #define RED 0 | |
137 | #define GREEN 1 | |
138 | #define BLUE 2 | |
139 | #define TRANSP 3 | |
140 | ||
141 | enum mxsfb_devtype { | |
142 | MXSFB_V3, | |
143 | MXSFB_V4, | |
144 | }; | |
145 | ||
146 | /* CPU dependent register offsets */ | |
147 | struct mxsfb_devdata { | |
148 | unsigned transfer_count; | |
149 | unsigned cur_buf; | |
150 | unsigned next_buf; | |
151 | unsigned debug0; | |
152 | unsigned hs_wdth_mask; | |
153 | unsigned hs_wdth_shift; | |
154 | unsigned ipversion; | |
155 | }; | |
156 | ||
157 | struct mxsfb_info { | |
158 | struct fb_info fb_info; | |
159 | struct platform_device *pdev; | |
160 | struct clk *clk; | |
161 | void __iomem *base; /* registers */ | |
162 | unsigned allocated_size; | |
163 | int enabled; | |
164 | unsigned ld_intf_width; | |
165 | unsigned dotclk_delay; | |
166 | const struct mxsfb_devdata *devdata; | |
167 | int mapped; | |
168 | }; | |
169 | ||
170 | #define mxsfb_is_v3(host) (host->devdata->ipversion == 3) | |
171 | #define mxsfb_is_v4(host) (host->devdata->ipversion == 4) | |
172 | ||
173 | static const struct mxsfb_devdata mxsfb_devdata[] = { | |
174 | [MXSFB_V3] = { | |
175 | .transfer_count = LCDC_V3_TRANSFER_COUNT, | |
176 | .cur_buf = LCDC_V3_CUR_BUF, | |
177 | .next_buf = LCDC_V3_NEXT_BUF, | |
178 | .debug0 = LCDC_V3_DEBUG0, | |
179 | .hs_wdth_mask = 0xff, | |
180 | .hs_wdth_shift = 24, | |
181 | .ipversion = 3, | |
182 | }, | |
183 | [MXSFB_V4] = { | |
184 | .transfer_count = LCDC_V4_TRANSFER_COUNT, | |
185 | .cur_buf = LCDC_V4_CUR_BUF, | |
186 | .next_buf = LCDC_V4_NEXT_BUF, | |
187 | .debug0 = LCDC_V4_DEBUG0, | |
188 | .hs_wdth_mask = 0x3fff, | |
189 | .hs_wdth_shift = 18, | |
190 | .ipversion = 4, | |
191 | }, | |
192 | }; | |
193 | ||
194 | #define to_imxfb_host(x) (container_of(x, struct mxsfb_info, fb_info)) | |
195 | ||
196 | /* mask and shift depends on architecture */ | |
197 | static inline u32 set_hsync_pulse_width(struct mxsfb_info *host, unsigned val) | |
198 | { | |
199 | return (val & host->devdata->hs_wdth_mask) << | |
200 | host->devdata->hs_wdth_shift; | |
201 | } | |
202 | ||
203 | static inline u32 get_hsync_pulse_width(struct mxsfb_info *host, unsigned val) | |
204 | { | |
205 | return (val >> host->devdata->hs_wdth_shift) & | |
206 | host->devdata->hs_wdth_mask; | |
207 | } | |
208 | ||
209 | static const struct fb_bitfield def_rgb565[] = { | |
210 | [RED] = { | |
211 | .offset = 11, | |
212 | .length = 5, | |
213 | }, | |
214 | [GREEN] = { | |
215 | .offset = 5, | |
216 | .length = 6, | |
217 | }, | |
218 | [BLUE] = { | |
219 | .offset = 0, | |
220 | .length = 5, | |
221 | }, | |
222 | [TRANSP] = { /* no support for transparency */ | |
223 | .length = 0, | |
224 | } | |
225 | }; | |
226 | ||
227 | static const struct fb_bitfield def_rgb666[] = { | |
228 | [RED] = { | |
229 | .offset = 16, | |
230 | .length = 6, | |
231 | }, | |
232 | [GREEN] = { | |
233 | .offset = 8, | |
234 | .length = 6, | |
235 | }, | |
236 | [BLUE] = { | |
237 | .offset = 0, | |
238 | .length = 6, | |
239 | }, | |
240 | [TRANSP] = { /* no support for transparency */ | |
241 | .length = 0, | |
242 | } | |
243 | }; | |
244 | ||
245 | static const struct fb_bitfield def_rgb888[] = { | |
246 | [RED] = { | |
247 | .offset = 16, | |
248 | .length = 8, | |
249 | }, | |
250 | [GREEN] = { | |
251 | .offset = 8, | |
252 | .length = 8, | |
253 | }, | |
254 | [BLUE] = { | |
255 | .offset = 0, | |
256 | .length = 8, | |
257 | }, | |
258 | [TRANSP] = { /* no support for transparency */ | |
259 | .length = 0, | |
260 | } | |
261 | }; | |
262 | ||
263 | static inline unsigned chan_to_field(unsigned chan, struct fb_bitfield *bf) | |
264 | { | |
265 | chan &= 0xffff; | |
266 | chan >>= 16 - bf->length; | |
267 | return chan << bf->offset; | |
268 | } | |
269 | ||
270 | static int mxsfb_check_var(struct fb_var_screeninfo *var, | |
271 | struct fb_info *fb_info) | |
272 | { | |
273 | struct mxsfb_info *host = to_imxfb_host(fb_info); | |
274 | const struct fb_bitfield *rgb = NULL; | |
275 | ||
276 | if (var->xres < MIN_XRES) | |
277 | var->xres = MIN_XRES; | |
278 | if (var->yres < MIN_YRES) | |
279 | var->yres = MIN_YRES; | |
280 | ||
281 | var->xres_virtual = var->xres; | |
282 | ||
283 | var->yres_virtual = var->yres; | |
284 | ||
285 | switch (var->bits_per_pixel) { | |
286 | case 16: | |
287 | /* always expect RGB 565 */ | |
288 | rgb = def_rgb565; | |
289 | break; | |
290 | case 32: | |
291 | switch (host->ld_intf_width) { | |
292 | case STMLCDIF_8BIT: | |
293 | pr_debug("Unsupported LCD bus width mapping\n"); | |
294 | break; | |
295 | case STMLCDIF_16BIT: | |
296 | case STMLCDIF_18BIT: | |
297 | /* 24 bit to 18 bit mapping */ | |
298 | rgb = def_rgb666; | |
299 | break; | |
300 | case STMLCDIF_24BIT: | |
301 | /* real 24 bit */ | |
302 | rgb = def_rgb888; | |
303 | break; | |
304 | } | |
305 | break; | |
306 | default: | |
307 | pr_debug("Unsupported colour depth: %u\n", var->bits_per_pixel); | |
308 | return -EINVAL; | |
309 | } | |
310 | ||
311 | /* | |
312 | * Copy the RGB parameters for this display | |
313 | * from the machine specific parameters. | |
314 | */ | |
315 | var->red = rgb[RED]; | |
316 | var->green = rgb[GREEN]; | |
317 | var->blue = rgb[BLUE]; | |
318 | var->transp = rgb[TRANSP]; | |
319 | ||
320 | return 0; | |
321 | } | |
322 | ||
323 | static void mxsfb_enable_controller(struct fb_info *fb_info) | |
324 | { | |
325 | struct mxsfb_info *host = to_imxfb_host(fb_info); | |
326 | u32 reg; | |
327 | ||
328 | dev_dbg(&host->pdev->dev, "%s\n", __func__); | |
329 | ||
330 | clk_enable(host->clk); | |
331 | clk_set_rate(host->clk, PICOS2KHZ(fb_info->var.pixclock) * 1000U); | |
332 | ||
333 | /* if it was disabled, re-enable the mode again */ | |
334 | writel(CTRL_DOTCLK_MODE, host->base + LCDC_CTRL + REG_SET); | |
335 | ||
336 | /* enable the SYNC signals first, then the DMA engine */ | |
337 | reg = readl(host->base + LCDC_VDCTRL4); | |
338 | reg |= VDCTRL4_SYNC_SIGNALS_ON; | |
339 | writel(reg, host->base + LCDC_VDCTRL4); | |
340 | ||
341 | writel(CTRL_RUN, host->base + LCDC_CTRL + REG_SET); | |
342 | ||
343 | host->enabled = 1; | |
344 | } | |
345 | ||
346 | static void mxsfb_disable_controller(struct fb_info *fb_info) | |
347 | { | |
348 | struct mxsfb_info *host = to_imxfb_host(fb_info); | |
349 | unsigned loop; | |
350 | u32 reg; | |
351 | ||
352 | dev_dbg(&host->pdev->dev, "%s\n", __func__); | |
353 | ||
354 | /* | |
355 | * Even if we disable the controller here, it will still continue | |
356 | * until its FIFOs are running out of data | |
357 | */ | |
358 | writel(CTRL_DOTCLK_MODE, host->base + LCDC_CTRL + REG_CLR); | |
359 | ||
360 | loop = 1000; | |
361 | while (loop) { | |
362 | reg = readl(host->base + LCDC_CTRL); | |
363 | if (!(reg & CTRL_RUN)) | |
364 | break; | |
365 | loop--; | |
366 | } | |
367 | ||
368 | writel(VDCTRL4_SYNC_SIGNALS_ON, host->base + LCDC_VDCTRL4 + REG_CLR); | |
369 | ||
370 | clk_disable(host->clk); | |
371 | ||
372 | host->enabled = 0; | |
373 | } | |
374 | ||
375 | static int mxsfb_set_par(struct fb_info *fb_info) | |
376 | { | |
377 | struct mxsfb_info *host = to_imxfb_host(fb_info); | |
378 | u32 ctrl, vdctrl0, vdctrl4; | |
379 | int line_size, fb_size; | |
380 | int reenable = 0; | |
381 | ||
382 | line_size = fb_info->var.xres * (fb_info->var.bits_per_pixel >> 3); | |
383 | fb_size = fb_info->var.yres_virtual * line_size; | |
384 | ||
385 | if (fb_size > fb_info->fix.smem_len) | |
386 | return -ENOMEM; | |
387 | ||
388 | fb_info->fix.line_length = line_size; | |
389 | ||
390 | /* | |
391 | * It seems, you can't re-program the controller if it is still running. | |
392 | * This may lead into shifted pictures (FIFO issue?). | |
393 | * So, first stop the controller and drain its FIFOs | |
394 | */ | |
395 | if (host->enabled) { | |
396 | reenable = 1; | |
397 | mxsfb_disable_controller(fb_info); | |
398 | } | |
399 | ||
400 | /* clear the FIFOs */ | |
401 | writel(CTRL1_FIFO_CLEAR, host->base + LCDC_CTRL1 + REG_SET); | |
402 | ||
403 | ctrl = CTRL_BYPASS_COUNT | CTRL_MASTER | | |
404 | CTRL_SET_BUS_WIDTH(host->ld_intf_width);; | |
405 | ||
406 | switch (fb_info->var.bits_per_pixel) { | |
407 | case 16: | |
408 | dev_dbg(&host->pdev->dev, "Setting up RGB565 mode\n"); | |
409 | ctrl |= CTRL_SET_WORD_LENGTH(0); | |
410 | writel(CTRL1_SET_BYTE_PACKAGING(0xf), host->base + LCDC_CTRL1); | |
411 | break; | |
412 | case 32: | |
413 | dev_dbg(&host->pdev->dev, "Setting up RGB888/666 mode\n"); | |
414 | ctrl |= CTRL_SET_WORD_LENGTH(3); | |
415 | switch (host->ld_intf_width) { | |
416 | case STMLCDIF_8BIT: | |
417 | dev_dbg(&host->pdev->dev, | |
418 | "Unsupported LCD bus width mapping\n"); | |
419 | return -EINVAL; | |
420 | case STMLCDIF_16BIT: | |
421 | case STMLCDIF_18BIT: | |
422 | /* 24 bit to 18 bit mapping */ | |
423 | ctrl |= CTRL_DF24; /* ignore the upper 2 bits in | |
424 | * each colour component | |
425 | */ | |
426 | break; | |
427 | case STMLCDIF_24BIT: | |
428 | /* real 24 bit */ | |
429 | break; | |
430 | } | |
431 | /* do not use packed pixels = one pixel per word instead */ | |
432 | writel(CTRL1_SET_BYTE_PACKAGING(0x7), host->base + LCDC_CTRL1); | |
433 | break; | |
434 | default: | |
435 | dev_dbg(&host->pdev->dev, "Unhandled color depth of %u\n", | |
436 | fb_info->var.bits_per_pixel); | |
437 | return -EINVAL; | |
438 | } | |
439 | ||
440 | writel(ctrl, host->base + LCDC_CTRL); | |
441 | ||
442 | writel(TRANSFER_COUNT_SET_VCOUNT(fb_info->var.yres) | | |
443 | TRANSFER_COUNT_SET_HCOUNT(fb_info->var.xres), | |
444 | host->base + host->devdata->transfer_count); | |
445 | ||
446 | vdctrl0 = VDCTRL0_ENABLE_PRESENT | /* always in DOTCLOCK mode */ | |
447 | VDCTRL0_VSYNC_PERIOD_UNIT | | |
448 | VDCTRL0_VSYNC_PULSE_WIDTH_UNIT | | |
449 | VDCTRL0_SET_VSYNC_PULSE_WIDTH(fb_info->var.vsync_len); | |
450 | if (fb_info->var.sync & FB_SYNC_HOR_HIGH_ACT) | |
451 | vdctrl0 |= VDCTRL0_HSYNC_ACT_HIGH; | |
452 | if (fb_info->var.sync & FB_SYNC_VERT_HIGH_ACT) | |
453 | vdctrl0 |= VDCTRL0_VSYNC_ACT_HIGH; | |
454 | if (fb_info->var.sync & FB_SYNC_DATA_ENABLE_HIGH_ACT) | |
455 | vdctrl0 |= VDCTRL0_ENABLE_ACT_HIGH; | |
456 | if (fb_info->var.sync & FB_SYNC_DOTCLK_FAILING_ACT) | |
457 | vdctrl0 |= VDCTRL0_DOTCLK_ACT_FAILING; | |
458 | ||
459 | writel(vdctrl0, host->base + LCDC_VDCTRL0); | |
460 | ||
461 | /* frame length in lines */ | |
462 | writel(fb_info->var.upper_margin + fb_info->var.vsync_len + | |
463 | fb_info->var.lower_margin + fb_info->var.yres, | |
464 | host->base + LCDC_VDCTRL1); | |
465 | ||
466 | /* line length in units of clocks or pixels */ | |
467 | writel(set_hsync_pulse_width(host, fb_info->var.hsync_len) | | |
468 | VDCTRL2_SET_HSYNC_PERIOD(fb_info->var.left_margin + | |
469 | fb_info->var.hsync_len + fb_info->var.right_margin + | |
470 | fb_info->var.xres), | |
471 | host->base + LCDC_VDCTRL2); | |
472 | ||
473 | writel(SET_HOR_WAIT_CNT(fb_info->var.left_margin + | |
474 | fb_info->var.hsync_len) | | |
475 | SET_VERT_WAIT_CNT(fb_info->var.upper_margin + | |
476 | fb_info->var.vsync_len), | |
477 | host->base + LCDC_VDCTRL3); | |
478 | ||
479 | vdctrl4 = SET_DOTCLK_H_VALID_DATA_CNT(fb_info->var.xres); | |
480 | if (mxsfb_is_v4(host)) | |
481 | vdctrl4 |= VDCTRL4_SET_DOTCLK_DLY(host->dotclk_delay); | |
482 | writel(vdctrl4, host->base + LCDC_VDCTRL4); | |
483 | ||
484 | writel(fb_info->fix.smem_start + | |
485 | fb_info->fix.line_length * fb_info->var.yoffset, | |
486 | host->base + host->devdata->next_buf); | |
487 | ||
488 | if (reenable) | |
489 | mxsfb_enable_controller(fb_info); | |
490 | ||
491 | return 0; | |
492 | } | |
493 | ||
494 | static int mxsfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, | |
495 | u_int transp, struct fb_info *fb_info) | |
496 | { | |
497 | unsigned int val; | |
498 | int ret = -EINVAL; | |
499 | ||
500 | /* | |
501 | * If greyscale is true, then we convert the RGB value | |
502 | * to greyscale no matter what visual we are using. | |
503 | */ | |
504 | if (fb_info->var.grayscale) | |
505 | red = green = blue = (19595 * red + 38470 * green + | |
506 | 7471 * blue) >> 16; | |
507 | ||
508 | switch (fb_info->fix.visual) { | |
509 | case FB_VISUAL_TRUECOLOR: | |
510 | /* | |
511 | * 12 or 16-bit True Colour. We encode the RGB value | |
512 | * according to the RGB bitfield information. | |
513 | */ | |
514 | if (regno < 16) { | |
515 | u32 *pal = fb_info->pseudo_palette; | |
516 | ||
517 | val = chan_to_field(red, &fb_info->var.red); | |
518 | val |= chan_to_field(green, &fb_info->var.green); | |
519 | val |= chan_to_field(blue, &fb_info->var.blue); | |
520 | ||
521 | pal[regno] = val; | |
522 | ret = 0; | |
523 | } | |
524 | break; | |
525 | ||
526 | case FB_VISUAL_STATIC_PSEUDOCOLOR: | |
527 | case FB_VISUAL_PSEUDOCOLOR: | |
528 | break; | |
529 | } | |
530 | ||
531 | return ret; | |
532 | } | |
533 | ||
534 | static int mxsfb_blank(int blank, struct fb_info *fb_info) | |
535 | { | |
536 | struct mxsfb_info *host = to_imxfb_host(fb_info); | |
537 | ||
538 | switch (blank) { | |
539 | case FB_BLANK_POWERDOWN: | |
540 | case FB_BLANK_VSYNC_SUSPEND: | |
541 | case FB_BLANK_HSYNC_SUSPEND: | |
542 | case FB_BLANK_NORMAL: | |
543 | if (host->enabled) | |
544 | mxsfb_disable_controller(fb_info); | |
545 | break; | |
546 | ||
547 | case FB_BLANK_UNBLANK: | |
548 | if (!host->enabled) | |
549 | mxsfb_enable_controller(fb_info); | |
550 | break; | |
551 | } | |
552 | return 0; | |
553 | } | |
554 | ||
555 | static int mxsfb_pan_display(struct fb_var_screeninfo *var, | |
556 | struct fb_info *fb_info) | |
557 | { | |
558 | struct mxsfb_info *host = to_imxfb_host(fb_info); | |
559 | unsigned offset; | |
560 | ||
561 | if (var->xoffset != 0) | |
562 | return -EINVAL; | |
563 | ||
564 | offset = fb_info->fix.line_length * var->yoffset; | |
565 | ||
566 | /* update on next VSYNC */ | |
567 | writel(fb_info->fix.smem_start + offset, | |
568 | host->base + host->devdata->next_buf); | |
569 | ||
570 | return 0; | |
571 | } | |
572 | ||
573 | static struct fb_ops mxsfb_ops = { | |
574 | .owner = THIS_MODULE, | |
575 | .fb_check_var = mxsfb_check_var, | |
576 | .fb_set_par = mxsfb_set_par, | |
577 | .fb_setcolreg = mxsfb_setcolreg, | |
578 | .fb_blank = mxsfb_blank, | |
579 | .fb_pan_display = mxsfb_pan_display, | |
580 | .fb_fillrect = cfb_fillrect, | |
581 | .fb_copyarea = cfb_copyarea, | |
582 | .fb_imageblit = cfb_imageblit, | |
583 | }; | |
584 | ||
585 | static int __devinit mxsfb_restore_mode(struct mxsfb_info *host) | |
586 | { | |
587 | struct fb_info *fb_info = &host->fb_info; | |
588 | unsigned line_count; | |
589 | unsigned period; | |
590 | unsigned long pa, fbsize; | |
591 | int bits_per_pixel, ofs; | |
592 | u32 transfer_count, vdctrl0, vdctrl2, vdctrl3, vdctrl4, ctrl; | |
593 | struct fb_videomode vmode; | |
594 | ||
595 | /* Only restore the mode when the controller is running */ | |
596 | ctrl = readl(host->base + LCDC_CTRL); | |
597 | if (!(ctrl & CTRL_RUN)) | |
598 | return -EINVAL; | |
599 | ||
600 | vdctrl0 = readl(host->base + LCDC_VDCTRL0); | |
601 | vdctrl2 = readl(host->base + LCDC_VDCTRL2); | |
602 | vdctrl3 = readl(host->base + LCDC_VDCTRL3); | |
603 | vdctrl4 = readl(host->base + LCDC_VDCTRL4); | |
604 | ||
605 | transfer_count = readl(host->base + host->devdata->transfer_count); | |
606 | ||
607 | vmode.xres = TRANSFER_COUNT_GET_HCOUNT(transfer_count); | |
608 | vmode.yres = TRANSFER_COUNT_GET_VCOUNT(transfer_count); | |
609 | ||
610 | switch (CTRL_GET_WORD_LENGTH(ctrl)) { | |
611 | case 0: | |
612 | bits_per_pixel = 16; | |
613 | break; | |
614 | case 3: | |
615 | bits_per_pixel = 32; | |
616 | case 1: | |
617 | default: | |
618 | return -EINVAL; | |
619 | } | |
620 | ||
621 | fb_info->var.bits_per_pixel = bits_per_pixel; | |
622 | ||
623 | vmode.pixclock = KHZ2PICOS(clk_get_rate(host->clk) / 1000U); | |
624 | vmode.hsync_len = get_hsync_pulse_width(host, vdctrl2); | |
625 | vmode.left_margin = GET_HOR_WAIT_CNT(vdctrl3) - vmode.hsync_len; | |
626 | vmode.right_margin = VDCTRL2_GET_HSYNC_PERIOD(vdctrl2) - vmode.hsync_len - | |
627 | vmode.left_margin - vmode.xres; | |
628 | vmode.vsync_len = VDCTRL0_GET_VSYNC_PULSE_WIDTH(vdctrl0); | |
629 | period = readl(host->base + LCDC_VDCTRL1); | |
630 | vmode.upper_margin = GET_VERT_WAIT_CNT(vdctrl3) - vmode.vsync_len; | |
631 | vmode.lower_margin = period - vmode.vsync_len - vmode.upper_margin - vmode.yres; | |
632 | ||
633 | vmode.vmode = FB_VMODE_NONINTERLACED; | |
634 | ||
635 | vmode.sync = 0; | |
636 | if (vdctrl0 & VDCTRL0_HSYNC_ACT_HIGH) | |
637 | vmode.sync |= FB_SYNC_HOR_HIGH_ACT; | |
638 | if (vdctrl0 & VDCTRL0_VSYNC_ACT_HIGH) | |
639 | vmode.sync |= FB_SYNC_VERT_HIGH_ACT; | |
640 | ||
641 | pr_debug("Reconstructed video mode:\n"); | |
642 | pr_debug("%dx%d, hsync: %u left: %u, right: %u, vsync: %u, upper: %u, lower: %u\n", | |
643 | vmode.xres, vmode.yres, | |
644 | vmode.hsync_len, vmode.left_margin, vmode.right_margin, | |
645 | vmode.vsync_len, vmode.upper_margin, vmode.lower_margin); | |
646 | pr_debug("pixclk: %ldkHz\n", PICOS2KHZ(vmode.pixclock)); | |
647 | ||
648 | fb_add_videomode(&vmode, &fb_info->modelist); | |
649 | ||
650 | host->ld_intf_width = CTRL_GET_BUS_WIDTH(ctrl); | |
651 | host->dotclk_delay = VDCTRL4_GET_DOTCLK_DLY(vdctrl4); | |
652 | ||
653 | fb_info->fix.line_length = vmode.xres * (bits_per_pixel >> 3); | |
654 | ||
655 | pa = readl(host->base + host->devdata->cur_buf); | |
656 | fbsize = fb_info->fix.line_length * vmode.yres; | |
657 | if (pa < fb_info->fix.smem_start) | |
658 | return -EINVAL; | |
659 | if (pa + fbsize > fb_info->fix.smem_start + fb_info->fix.smem_len) | |
660 | return -EINVAL; | |
661 | ofs = pa - fb_info->fix.smem_start; | |
662 | if (ofs) { | |
663 | memmove(fb_info->screen_base, fb_info->screen_base + ofs, fbsize); | |
664 | writel(fb_info->fix.smem_start, host->base + host->devdata->next_buf); | |
665 | } | |
666 | ||
667 | line_count = fb_info->fix.smem_len / fb_info->fix.line_length; | |
668 | fb_info->fix.ypanstep = 1; | |
669 | ||
670 | clk_enable(host->clk); | |
671 | host->enabled = 1; | |
672 | ||
673 | return 0; | |
674 | } | |
675 | ||
676 | static int __devinit mxsfb_init_fbinfo(struct mxsfb_info *host) | |
677 | { | |
678 | struct fb_info *fb_info = &host->fb_info; | |
679 | struct fb_var_screeninfo *var = &fb_info->var; | |
680 | struct mxsfb_platform_data *pdata = host->pdev->dev.platform_data; | |
681 | dma_addr_t fb_phys; | |
682 | void *fb_virt; | |
683 | unsigned fb_size = pdata->fb_size; | |
684 | ||
685 | fb_info->fbops = &mxsfb_ops; | |
686 | fb_info->flags = FBINFO_FLAG_DEFAULT | FBINFO_READS_FAST; | |
687 | strlcpy(fb_info->fix.id, "mxs", sizeof(fb_info->fix.id)); | |
688 | fb_info->fix.type = FB_TYPE_PACKED_PIXELS; | |
689 | fb_info->fix.ypanstep = 1; | |
690 | fb_info->fix.visual = FB_VISUAL_TRUECOLOR, | |
691 | fb_info->fix.accel = FB_ACCEL_NONE; | |
692 | ||
693 | var->bits_per_pixel = pdata->default_bpp ? pdata->default_bpp : 16; | |
694 | var->nonstd = 0; | |
695 | var->activate = FB_ACTIVATE_NOW; | |
696 | var->accel_flags = 0; | |
697 | var->vmode = FB_VMODE_NONINTERLACED; | |
698 | ||
699 | host->dotclk_delay = pdata->dotclk_delay; | |
700 | host->ld_intf_width = pdata->ld_intf_width; | |
701 | ||
702 | /* Memory allocation for framebuffer */ | |
703 | if (pdata->fb_phys) { | |
704 | if (!fb_size) | |
705 | return -EINVAL; | |
706 | ||
707 | fb_phys = pdata->fb_phys; | |
708 | ||
709 | if (!request_mem_region(fb_phys, fb_size, host->pdev->name)) | |
710 | return -ENOMEM; | |
711 | ||
712 | fb_virt = ioremap(fb_phys, fb_size); | |
713 | if (!fb_virt) { | |
714 | release_mem_region(fb_phys, fb_size); | |
715 | return -ENOMEM; | |
716 | } | |
717 | host->mapped = 1; | |
718 | } else { | |
719 | if (!fb_size) | |
720 | fb_size = SZ_2M; /* default */ | |
721 | fb_virt = alloc_pages_exact(fb_size, GFP_DMA); | |
722 | if (!fb_virt) | |
723 | return -ENOMEM; | |
724 | ||
725 | fb_phys = virt_to_phys(fb_virt); | |
726 | } | |
727 | ||
728 | fb_info->fix.smem_start = fb_phys; | |
729 | fb_info->screen_base = fb_virt; | |
730 | fb_info->screen_size = fb_info->fix.smem_len = fb_size; | |
731 | ||
732 | if (mxsfb_restore_mode(host)) | |
733 | memset(fb_virt, 0, fb_size); | |
734 | ||
735 | return 0; | |
736 | } | |
737 | ||
738 | static void __devexit mxsfb_free_videomem(struct mxsfb_info *host) | |
739 | { | |
740 | struct fb_info *fb_info = &host->fb_info; | |
741 | ||
742 | if (host->mapped) { | |
743 | iounmap(fb_info->screen_base); | |
744 | release_mem_region(fb_info->fix.smem_start, | |
745 | fb_info->screen_size); | |
746 | } else { | |
747 | free_pages_exact(fb_info->screen_base, fb_info->fix.smem_len); | |
748 | } | |
749 | } | |
750 | ||
751 | static int __devinit mxsfb_probe(struct platform_device *pdev) | |
752 | { | |
753 | struct mxsfb_platform_data *pdata = pdev->dev.platform_data; | |
754 | struct resource *res; | |
755 | struct mxsfb_info *host; | |
756 | struct fb_info *fb_info; | |
757 | struct fb_modelist *modelist; | |
758 | int i, ret; | |
759 | ||
760 | if (!pdata) { | |
761 | dev_err(&pdev->dev, "No platformdata. Giving up\n"); | |
762 | return -ENODEV; | |
763 | } | |
764 | ||
765 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
766 | if (!res) { | |
767 | dev_err(&pdev->dev, "Cannot get memory IO resource\n"); | |
768 | return -ENODEV; | |
769 | } | |
770 | ||
771 | if (!request_mem_region(res->start, resource_size(res), pdev->name)) | |
772 | return -EBUSY; | |
773 | ||
774 | fb_info = framebuffer_alloc(sizeof(struct mxsfb_info), &pdev->dev); | |
775 | if (!fb_info) { | |
776 | dev_err(&pdev->dev, "Failed to allocate fbdev\n"); | |
777 | ret = -ENOMEM; | |
778 | goto error_alloc_info; | |
779 | } | |
780 | ||
781 | host = to_imxfb_host(fb_info); | |
782 | ||
783 | host->base = ioremap(res->start, resource_size(res)); | |
784 | if (!host->base) { | |
785 | dev_err(&pdev->dev, "ioremap failed\n"); | |
786 | ret = -ENOMEM; | |
787 | goto error_ioremap; | |
788 | } | |
789 | ||
790 | host->pdev = pdev; | |
791 | platform_set_drvdata(pdev, host); | |
792 | ||
793 | host->devdata = &mxsfb_devdata[pdev->id_entry->driver_data]; | |
794 | ||
795 | host->clk = clk_get(&host->pdev->dev, NULL); | |
796 | if (IS_ERR(host->clk)) { | |
797 | ret = PTR_ERR(host->clk); | |
798 | goto error_getclock; | |
799 | } | |
800 | ||
801 | fb_info->pseudo_palette = kmalloc(sizeof(u32) * 16, GFP_KERNEL); | |
802 | if (!fb_info->pseudo_palette) { | |
803 | ret = -ENOMEM; | |
804 | goto error_pseudo_pallette; | |
805 | } | |
806 | ||
807 | INIT_LIST_HEAD(&fb_info->modelist); | |
808 | ||
809 | ret = mxsfb_init_fbinfo(host); | |
810 | if (ret != 0) | |
811 | goto error_init_fb; | |
812 | ||
813 | for (i = 0; i < pdata->mode_count; i++) | |
814 | fb_add_videomode(&pdata->mode_list[i], &fb_info->modelist); | |
815 | ||
816 | modelist = list_first_entry(&fb_info->modelist, | |
817 | struct fb_modelist, list); | |
818 | fb_videomode_to_var(&fb_info->var, &modelist->mode); | |
819 | ||
820 | /* init the color fields */ | |
821 | mxsfb_check_var(&fb_info->var, fb_info); | |
822 | ||
823 | platform_set_drvdata(pdev, fb_info); | |
824 | ||
825 | ret = register_framebuffer(fb_info); | |
826 | if (ret != 0) { | |
827 | dev_err(&pdev->dev,"Failed to register framebuffer\n"); | |
828 | goto error_register; | |
829 | } | |
830 | ||
831 | if (!host->enabled) { | |
832 | writel(0, host->base + LCDC_CTRL); | |
833 | mxsfb_set_par(fb_info); | |
834 | mxsfb_enable_controller(fb_info); | |
835 | } | |
836 | ||
837 | dev_info(&pdev->dev, "initialized\n"); | |
838 | ||
839 | return 0; | |
840 | ||
841 | error_register: | |
842 | if (host->enabled) | |
843 | clk_disable(host->clk); | |
844 | fb_destroy_modelist(&fb_info->modelist); | |
845 | error_init_fb: | |
846 | kfree(fb_info->pseudo_palette); | |
847 | error_pseudo_pallette: | |
848 | clk_put(host->clk); | |
849 | error_getclock: | |
850 | iounmap(host->base); | |
851 | error_ioremap: | |
852 | framebuffer_release(fb_info); | |
853 | error_alloc_info: | |
854 | release_mem_region(res->start, resource_size(res)); | |
855 | ||
856 | return ret; | |
857 | } | |
858 | ||
859 | static int __devexit mxsfb_remove(struct platform_device *pdev) | |
860 | { | |
861 | struct fb_info *fb_info = platform_get_drvdata(pdev); | |
862 | struct mxsfb_info *host = to_imxfb_host(fb_info); | |
863 | struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
864 | ||
865 | if (host->enabled) | |
866 | mxsfb_disable_controller(fb_info); | |
867 | ||
868 | unregister_framebuffer(fb_info); | |
869 | kfree(fb_info->pseudo_palette); | |
870 | mxsfb_free_videomem(host); | |
871 | iounmap(host->base); | |
872 | clk_put(host->clk); | |
873 | ||
874 | framebuffer_release(fb_info); | |
875 | release_mem_region(res->start, resource_size(res)); | |
876 | ||
877 | platform_set_drvdata(pdev, NULL); | |
878 | ||
879 | return 0; | |
880 | } | |
881 | ||
882 | static struct platform_device_id mxsfb_devtype[] = { | |
883 | { | |
884 | .name = "imx23-fb", | |
885 | .driver_data = MXSFB_V3, | |
886 | }, { | |
887 | .name = "imx28-fb", | |
888 | .driver_data = MXSFB_V4, | |
889 | }, { | |
890 | /* sentinel */ | |
891 | } | |
892 | }; | |
893 | MODULE_DEVICE_TABLE(platform, mxsfb_devtype); | |
894 | ||
895 | static struct platform_driver mxsfb_driver = { | |
896 | .probe = mxsfb_probe, | |
897 | .remove = __devexit_p(mxsfb_remove), | |
898 | .id_table = mxsfb_devtype, | |
899 | .driver = { | |
900 | .name = DRIVER_NAME, | |
901 | }, | |
902 | }; | |
903 | ||
904 | static int __init mxsfb_init(void) | |
905 | { | |
906 | return platform_driver_register(&mxsfb_driver); | |
907 | } | |
908 | ||
909 | static void __exit mxsfb_exit(void) | |
910 | { | |
911 | platform_driver_unregister(&mxsfb_driver); | |
912 | } | |
913 | ||
914 | module_init(mxsfb_init); | |
915 | module_exit(mxsfb_exit); | |
916 | ||
917 | MODULE_DESCRIPTION("Freescale mxs framebuffer driver"); | |
918 | MODULE_AUTHOR("Sascha Hauer, Pengutronix"); | |
919 | MODULE_LICENSE("GPL"); |