]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * linux/drivers/video/neofb.c -- NeoMagic Framebuffer Driver | |
3 | * | |
4 | * Copyright (c) 2001-2002 Denis Oliver Kropp <dok@directfb.org> | |
5 | * | |
6 | * | |
7 | * Card specific code is based on XFree86's neomagic driver. | |
8 | * Framebuffer framework code is based on code of cyber2000fb. | |
9 | * | |
10 | * This file is subject to the terms and conditions of the GNU General | |
11 | * Public License. See the file COPYING in the main directory of this | |
12 | * archive for more details. | |
13 | * | |
14 | * | |
15 | * 0.4.1 | |
16 | * - Cosmetic changes (dok) | |
17 | * | |
18 | * 0.4 | |
19 | * - Toshiba Libretto support, allow modes larger than LCD size if | |
20 | * LCD is disabled, keep BIOS settings if internal/external display | |
21 | * haven't been enabled explicitly | |
22 | * (Thomas J. Moore <dark@mama.indstate.edu>) | |
23 | * | |
24 | * 0.3.3 | |
25 | * - Porting over to new fbdev api. (jsimmons) | |
26 | * | |
27 | * 0.3.2 | |
28 | * - got rid of all floating point (dok) | |
29 | * | |
30 | * 0.3.1 | |
31 | * - added module license (dok) | |
32 | * | |
33 | * 0.3 | |
34 | * - hardware accelerated clear and move for 2200 and above (dok) | |
35 | * - maximum allowed dotclock is handled now (dok) | |
36 | * | |
37 | * 0.2.1 | |
38 | * - correct panning after X usage (dok) | |
39 | * - added module and kernel parameters (dok) | |
40 | * - no stretching if external display is enabled (dok) | |
41 | * | |
42 | * 0.2 | |
43 | * - initial version (dok) | |
44 | * | |
45 | * | |
46 | * TODO | |
47 | * - ioctl for internal/external switching | |
48 | * - blanking | |
49 | * - 32bit depth support, maybe impossible | |
50 | * - disable pan-on-sync, need specs | |
51 | * | |
52 | * BUGS | |
53 | * - white margin on bootup like with tdfxfb (colormap problem?) | |
54 | * | |
55 | */ | |
56 | ||
1da177e4 LT |
57 | #include <linux/module.h> |
58 | #include <linux/kernel.h> | |
59 | #include <linux/errno.h> | |
60 | #include <linux/string.h> | |
61 | #include <linux/mm.h> | |
1da177e4 LT |
62 | #include <linux/slab.h> |
63 | #include <linux/delay.h> | |
64 | #include <linux/fb.h> | |
65 | #include <linux/pci.h> | |
66 | #include <linux/init.h> | |
67 | #ifdef CONFIG_TOSHIBA | |
68 | #include <linux/toshiba.h> | |
1da177e4 LT |
69 | #endif |
70 | ||
71 | #include <asm/io.h> | |
72 | #include <asm/irq.h> | |
73 | #include <asm/pgtable.h> | |
74 | #include <asm/system.h> | |
1da177e4 LT |
75 | |
76 | #ifdef CONFIG_MTRR | |
77 | #include <asm/mtrr.h> | |
78 | #endif | |
79 | ||
80 | #include <video/vga.h> | |
81 | #include <video/neomagic.h> | |
82 | ||
83 | #define NEOFB_VERSION "0.4.2" | |
84 | ||
85 | /* --------------------------------------------------------------------- */ | |
86 | ||
87 | static int internal; | |
88 | static int external; | |
89 | static int libretto; | |
90 | static int nostretch; | |
91 | static int nopciburst; | |
92 | static char *mode_option __devinitdata = NULL; | |
93 | ||
94 | #ifdef MODULE | |
95 | ||
96 | MODULE_AUTHOR("(c) 2001-2002 Denis Oliver Kropp <dok@convergence.de>"); | |
97 | MODULE_LICENSE("GPL"); | |
98 | MODULE_DESCRIPTION("FBDev driver for NeoMagic PCI Chips"); | |
99 | module_param(internal, bool, 0); | |
100 | MODULE_PARM_DESC(internal, "Enable output on internal LCD Display."); | |
101 | module_param(external, bool, 0); | |
102 | MODULE_PARM_DESC(external, "Enable output on external CRT."); | |
103 | module_param(libretto, bool, 0); | |
104 | MODULE_PARM_DESC(libretto, "Force Libretto 100/110 800x480 LCD."); | |
105 | module_param(nostretch, bool, 0); | |
106 | MODULE_PARM_DESC(nostretch, | |
107 | "Disable stretching of modes smaller than LCD."); | |
108 | module_param(nopciburst, bool, 0); | |
109 | MODULE_PARM_DESC(nopciburst, "Disable PCI burst mode."); | |
110 | module_param(mode_option, charp, 0); | |
111 | MODULE_PARM_DESC(mode_option, "Preferred video mode ('640x480-8@60', etc)"); | |
112 | ||
113 | #endif | |
114 | ||
115 | ||
116 | /* --------------------------------------------------------------------- */ | |
117 | ||
118 | static biosMode bios8[] = { | |
119 | {320, 240, 0x40}, | |
120 | {300, 400, 0x42}, | |
121 | {640, 400, 0x20}, | |
122 | {640, 480, 0x21}, | |
123 | {800, 600, 0x23}, | |
124 | {1024, 768, 0x25}, | |
125 | }; | |
126 | ||
127 | static biosMode bios16[] = { | |
128 | {320, 200, 0x2e}, | |
129 | {320, 240, 0x41}, | |
130 | {300, 400, 0x43}, | |
131 | {640, 480, 0x31}, | |
132 | {800, 600, 0x34}, | |
133 | {1024, 768, 0x37}, | |
134 | }; | |
135 | ||
136 | static biosMode bios24[] = { | |
137 | {640, 480, 0x32}, | |
138 | {800, 600, 0x35}, | |
139 | {1024, 768, 0x38} | |
140 | }; | |
141 | ||
142 | #ifdef NO_32BIT_SUPPORT_YET | |
143 | /* FIXME: guessed values, wrong */ | |
144 | static biosMode bios32[] = { | |
145 | {640, 480, 0x33}, | |
146 | {800, 600, 0x36}, | |
147 | {1024, 768, 0x39} | |
148 | }; | |
149 | #endif | |
150 | ||
151 | static inline void write_le32(int regindex, u32 val, const struct neofb_par *par) | |
152 | { | |
153 | writel(val, par->neo2200 + par->cursorOff + regindex); | |
154 | } | |
155 | ||
156 | static int neoFindMode(int xres, int yres, int depth) | |
157 | { | |
158 | int xres_s; | |
159 | int i, size; | |
160 | biosMode *mode; | |
161 | ||
162 | switch (depth) { | |
163 | case 8: | |
d1ae418e | 164 | size = ARRAY_SIZE(bios8); |
1da177e4 LT |
165 | mode = bios8; |
166 | break; | |
167 | case 16: | |
d1ae418e | 168 | size = ARRAY_SIZE(bios16); |
1da177e4 LT |
169 | mode = bios16; |
170 | break; | |
171 | case 24: | |
d1ae418e | 172 | size = ARRAY_SIZE(bios24); |
1da177e4 LT |
173 | mode = bios24; |
174 | break; | |
175 | #ifdef NO_32BIT_SUPPORT_YET | |
176 | case 32: | |
d1ae418e | 177 | size = ARRAY_SIZE(bios32); |
1da177e4 LT |
178 | mode = bios32; |
179 | break; | |
180 | #endif | |
181 | default: | |
182 | return 0; | |
183 | } | |
184 | ||
185 | for (i = 0; i < size; i++) { | |
186 | if (xres <= mode[i].x_res) { | |
187 | xres_s = mode[i].x_res; | |
188 | for (; i < size; i++) { | |
189 | if (mode[i].x_res != xres_s) | |
190 | return mode[i - 1].mode; | |
191 | if (yres <= mode[i].y_res) | |
192 | return mode[i].mode; | |
193 | } | |
194 | } | |
195 | } | |
196 | return mode[size - 1].mode; | |
197 | } | |
198 | ||
199 | /* | |
200 | * neoCalcVCLK -- | |
201 | * | |
202 | * Determine the closest clock frequency to the one requested. | |
203 | */ | |
1da177e4 LT |
204 | #define MAX_N 127 |
205 | #define MAX_D 31 | |
206 | #define MAX_F 1 | |
207 | ||
208 | static void neoCalcVCLK(const struct fb_info *info, | |
209 | struct neofb_par *par, long freq) | |
210 | { | |
211 | int n, d, f; | |
212 | int n_best = 0, d_best = 0, f_best = 0; | |
7fc80b7b | 213 | long f_best_diff = 0x7ffff; |
1da177e4 LT |
214 | |
215 | for (f = 0; f <= MAX_F; f++) | |
7fc80b7b KH |
216 | for (d = 0; d <= MAX_D; d++) |
217 | for (n = 0; n <= MAX_N; n++) { | |
218 | long f_out; | |
219 | long f_diff; | |
220 | ||
221 | f_out = ((14318 * (n + 1)) / (d + 1)) >> f; | |
222 | f_diff = abs(f_out - freq); | |
223 | if (f_diff <= f_best_diff) { | |
1da177e4 LT |
224 | f_best_diff = f_diff; |
225 | n_best = n; | |
226 | d_best = d; | |
227 | f_best = f; | |
228 | } | |
7fc80b7b KH |
229 | if (f_out > freq) |
230 | break; | |
1da177e4 LT |
231 | } |
232 | ||
233 | if (info->fix.accel == FB_ACCEL_NEOMAGIC_NM2200 || | |
234 | info->fix.accel == FB_ACCEL_NEOMAGIC_NM2230 || | |
235 | info->fix.accel == FB_ACCEL_NEOMAGIC_NM2360 || | |
236 | info->fix.accel == FB_ACCEL_NEOMAGIC_NM2380) { | |
237 | /* NOT_DONE: We are trying the full range of the 2200 clock. | |
238 | We should be able to try n up to 2047 */ | |
239 | par->VCLK3NumeratorLow = n_best; | |
240 | par->VCLK3NumeratorHigh = (f_best << 7); | |
241 | } else | |
242 | par->VCLK3NumeratorLow = n_best | (f_best << 7); | |
243 | ||
244 | par->VCLK3Denominator = d_best; | |
245 | ||
246 | #ifdef NEOFB_DEBUG | |
7fc80b7b KH |
247 | printk(KERN_DEBUG "neoVCLK: f:%ld NumLow=%d NumHi=%d Den=%d Df=%ld\n", |
248 | freq, | |
1da177e4 LT |
249 | par->VCLK3NumeratorLow, |
250 | par->VCLK3NumeratorHigh, | |
7fc80b7b | 251 | par->VCLK3Denominator, f_best_diff); |
1da177e4 LT |
252 | #endif |
253 | } | |
254 | ||
255 | /* | |
256 | * vgaHWInit -- | |
257 | * Handle the initialization, etc. of a screen. | |
258 | * Return FALSE on failure. | |
259 | */ | |
260 | ||
261 | static int vgaHWInit(const struct fb_var_screeninfo *var, | |
c6b044d6 | 262 | struct neofb_par *par) |
1da177e4 | 263 | { |
c6b044d6 KH |
264 | int hsync_end = var->xres + var->right_margin + var->hsync_len; |
265 | int htotal = (hsync_end + var->left_margin) >> 3; | |
266 | int vsync_start = var->yres + var->lower_margin; | |
267 | int vsync_end = vsync_start + var->vsync_len; | |
268 | int vtotal = vsync_end + var->upper_margin; | |
269 | ||
1da177e4 LT |
270 | par->MiscOutReg = 0x23; |
271 | ||
c6b044d6 | 272 | if (!(var->sync & FB_SYNC_HOR_HIGH_ACT)) |
1da177e4 LT |
273 | par->MiscOutReg |= 0x40; |
274 | ||
c6b044d6 | 275 | if (!(var->sync & FB_SYNC_VERT_HIGH_ACT)) |
1da177e4 LT |
276 | par->MiscOutReg |= 0x80; |
277 | ||
278 | /* | |
279 | * Time Sequencer | |
280 | */ | |
281 | par->Sequencer[0] = 0x00; | |
282 | par->Sequencer[1] = 0x01; | |
283 | par->Sequencer[2] = 0x0F; | |
284 | par->Sequencer[3] = 0x00; /* Font select */ | |
285 | par->Sequencer[4] = 0x0E; /* Misc */ | |
286 | ||
287 | /* | |
288 | * CRTC Controller | |
289 | */ | |
c6b044d6 KH |
290 | par->CRTC[0] = htotal - 5; |
291 | par->CRTC[1] = (var->xres >> 3) - 1; | |
292 | par->CRTC[2] = (var->xres >> 3) - 1; | |
293 | par->CRTC[3] = ((htotal - 1) & 0x1F) | 0x80; | |
294 | par->CRTC[4] = ((var->xres + var->right_margin) >> 3); | |
295 | par->CRTC[5] = (((htotal - 1) & 0x20) << 2) | |
296 | | (((hsync_end >> 3)) & 0x1F); | |
297 | par->CRTC[6] = (vtotal - 2) & 0xFF; | |
298 | par->CRTC[7] = (((vtotal - 2) & 0x100) >> 8) | |
299 | | (((var->yres - 1) & 0x100) >> 7) | |
300 | | ((vsync_start & 0x100) >> 6) | |
301 | | (((var->yres - 1) & 0x100) >> 5) | |
302 | | 0x10 | (((vtotal - 2) & 0x200) >> 4) | |
303 | | (((var->yres - 1) & 0x200) >> 3) | |
304 | | ((vsync_start & 0x200) >> 2); | |
1da177e4 | 305 | par->CRTC[8] = 0x00; |
c6b044d6 | 306 | par->CRTC[9] = (((var->yres - 1) & 0x200) >> 4) | 0x40; |
1da177e4 | 307 | |
c6b044d6 | 308 | if (var->vmode & FB_VMODE_DOUBLE) |
1da177e4 LT |
309 | par->CRTC[9] |= 0x80; |
310 | ||
311 | par->CRTC[10] = 0x00; | |
312 | par->CRTC[11] = 0x00; | |
313 | par->CRTC[12] = 0x00; | |
314 | par->CRTC[13] = 0x00; | |
315 | par->CRTC[14] = 0x00; | |
316 | par->CRTC[15] = 0x00; | |
c6b044d6 KH |
317 | par->CRTC[16] = vsync_start & 0xFF; |
318 | par->CRTC[17] = (vsync_end & 0x0F) | 0x20; | |
319 | par->CRTC[18] = (var->yres - 1) & 0xFF; | |
1da177e4 LT |
320 | par->CRTC[19] = var->xres_virtual >> 4; |
321 | par->CRTC[20] = 0x00; | |
c6b044d6 KH |
322 | par->CRTC[21] = (var->yres - 1) & 0xFF; |
323 | par->CRTC[22] = (vtotal - 1) & 0xFF; | |
1da177e4 LT |
324 | par->CRTC[23] = 0xC3; |
325 | par->CRTC[24] = 0xFF; | |
326 | ||
327 | /* | |
328 | * are these unnecessary? | |
329 | * vgaHWHBlankKGA(mode, regp, 0, KGA_FIX_OVERSCAN | KGA_ENABLE_ON_ZERO); | |
330 | * vgaHWVBlankKGA(mode, regp, 0, KGA_FIX_OVERSCAN | KGA_ENABLE_ON_ZERO); | |
331 | */ | |
332 | ||
333 | /* | |
334 | * Graphics Display Controller | |
335 | */ | |
336 | par->Graphics[0] = 0x00; | |
337 | par->Graphics[1] = 0x00; | |
338 | par->Graphics[2] = 0x00; | |
339 | par->Graphics[3] = 0x00; | |
340 | par->Graphics[4] = 0x00; | |
341 | par->Graphics[5] = 0x40; | |
342 | par->Graphics[6] = 0x05; /* only map 64k VGA memory !!!! */ | |
343 | par->Graphics[7] = 0x0F; | |
344 | par->Graphics[8] = 0xFF; | |
345 | ||
346 | ||
347 | par->Attribute[0] = 0x00; /* standard colormap translation */ | |
348 | par->Attribute[1] = 0x01; | |
349 | par->Attribute[2] = 0x02; | |
350 | par->Attribute[3] = 0x03; | |
351 | par->Attribute[4] = 0x04; | |
352 | par->Attribute[5] = 0x05; | |
353 | par->Attribute[6] = 0x06; | |
354 | par->Attribute[7] = 0x07; | |
355 | par->Attribute[8] = 0x08; | |
356 | par->Attribute[9] = 0x09; | |
357 | par->Attribute[10] = 0x0A; | |
358 | par->Attribute[11] = 0x0B; | |
359 | par->Attribute[12] = 0x0C; | |
360 | par->Attribute[13] = 0x0D; | |
361 | par->Attribute[14] = 0x0E; | |
362 | par->Attribute[15] = 0x0F; | |
363 | par->Attribute[16] = 0x41; | |
364 | par->Attribute[17] = 0xFF; | |
365 | par->Attribute[18] = 0x0F; | |
366 | par->Attribute[19] = 0x00; | |
367 | par->Attribute[20] = 0x00; | |
368 | return 0; | |
369 | } | |
370 | ||
371 | static void vgaHWLock(struct vgastate *state) | |
372 | { | |
373 | /* Protect CRTC[0-7] */ | |
374 | vga_wcrt(state->vgabase, 0x11, vga_rcrt(state->vgabase, 0x11) | 0x80); | |
375 | } | |
376 | ||
377 | static void vgaHWUnlock(void) | |
378 | { | |
379 | /* Unprotect CRTC[0-7] */ | |
380 | vga_wcrt(NULL, 0x11, vga_rcrt(NULL, 0x11) & ~0x80); | |
381 | } | |
382 | ||
383 | static void neoLock(struct vgastate *state) | |
384 | { | |
385 | vga_wgfx(state->vgabase, 0x09, 0x00); | |
386 | vgaHWLock(state); | |
387 | } | |
388 | ||
389 | static void neoUnlock(void) | |
390 | { | |
391 | vgaHWUnlock(); | |
392 | vga_wgfx(NULL, 0x09, 0x26); | |
393 | } | |
394 | ||
395 | /* | |
396 | * VGA Palette management | |
397 | */ | |
398 | static int paletteEnabled = 0; | |
399 | ||
400 | static inline void VGAenablePalette(void) | |
401 | { | |
402 | vga_r(NULL, VGA_IS1_RC); | |
403 | vga_w(NULL, VGA_ATT_W, 0x00); | |
404 | paletteEnabled = 1; | |
405 | } | |
406 | ||
407 | static inline void VGAdisablePalette(void) | |
408 | { | |
409 | vga_r(NULL, VGA_IS1_RC); | |
410 | vga_w(NULL, VGA_ATT_W, 0x20); | |
411 | paletteEnabled = 0; | |
412 | } | |
413 | ||
414 | static inline void VGAwATTR(u8 index, u8 value) | |
415 | { | |
416 | if (paletteEnabled) | |
417 | index &= ~0x20; | |
418 | else | |
419 | index |= 0x20; | |
420 | ||
421 | vga_r(NULL, VGA_IS1_RC); | |
422 | vga_wattr(NULL, index, value); | |
423 | } | |
424 | ||
425 | static void vgaHWProtect(int on) | |
426 | { | |
427 | unsigned char tmp; | |
428 | ||
429 | if (on) { | |
430 | /* | |
431 | * Turn off screen and disable sequencer. | |
432 | */ | |
433 | tmp = vga_rseq(NULL, 0x01); | |
434 | vga_wseq(NULL, 0x00, 0x01); /* Synchronous Reset */ | |
435 | vga_wseq(NULL, 0x01, tmp | 0x20); /* disable the display */ | |
436 | ||
437 | VGAenablePalette(); | |
438 | } else { | |
439 | /* | |
440 | * Reenable sequencer, then turn on screen. | |
441 | */ | |
442 | tmp = vga_rseq(NULL, 0x01); | |
443 | vga_wseq(NULL, 0x01, tmp & ~0x20); /* reenable display */ | |
444 | vga_wseq(NULL, 0x00, 0x03); /* clear synchronousreset */ | |
445 | ||
446 | VGAdisablePalette(); | |
447 | } | |
448 | } | |
449 | ||
450 | static void vgaHWRestore(const struct fb_info *info, | |
451 | const struct neofb_par *par) | |
452 | { | |
453 | int i; | |
454 | ||
455 | vga_w(NULL, VGA_MIS_W, par->MiscOutReg); | |
456 | ||
457 | for (i = 1; i < 5; i++) | |
458 | vga_wseq(NULL, i, par->Sequencer[i]); | |
459 | ||
460 | /* Ensure CRTC registers 0-7 are unlocked by clearing bit 7 or CRTC[17] */ | |
461 | vga_wcrt(NULL, 17, par->CRTC[17] & ~0x80); | |
462 | ||
463 | for (i = 0; i < 25; i++) | |
464 | vga_wcrt(NULL, i, par->CRTC[i]); | |
465 | ||
466 | for (i = 0; i < 9; i++) | |
467 | vga_wgfx(NULL, i, par->Graphics[i]); | |
468 | ||
469 | VGAenablePalette(); | |
470 | ||
471 | for (i = 0; i < 21; i++) | |
472 | VGAwATTR(i, par->Attribute[i]); | |
473 | ||
474 | VGAdisablePalette(); | |
475 | } | |
476 | ||
477 | ||
478 | /* -------------------- Hardware specific routines ------------------------- */ | |
479 | ||
480 | /* | |
481 | * Hardware Acceleration for Neo2200+ | |
482 | */ | |
483 | static inline int neo2200_sync(struct fb_info *info) | |
484 | { | |
9f19bc56 | 485 | struct neofb_par *par = info->par; |
1da177e4 | 486 | |
1ca6b62f KH |
487 | while (readl(&par->neo2200->bltStat) & 1) |
488 | cpu_relax(); | |
1da177e4 LT |
489 | return 0; |
490 | } | |
491 | ||
492 | static inline void neo2200_wait_fifo(struct fb_info *info, | |
493 | int requested_fifo_space) | |
494 | { | |
495 | // ndev->neo.waitfifo_calls++; | |
496 | // ndev->neo.waitfifo_sum += requested_fifo_space; | |
497 | ||
498 | /* FIXME: does not work | |
499 | if (neo_fifo_space < requested_fifo_space) | |
500 | { | |
501 | neo_fifo_waitcycles++; | |
502 | ||
503 | while (1) | |
504 | { | |
505 | neo_fifo_space = (neo2200->bltStat >> 8); | |
506 | if (neo_fifo_space >= requested_fifo_space) | |
507 | break; | |
508 | } | |
509 | } | |
510 | else | |
511 | { | |
512 | neo_fifo_cache_hits++; | |
513 | } | |
514 | ||
515 | neo_fifo_space -= requested_fifo_space; | |
516 | */ | |
517 | ||
518 | neo2200_sync(info); | |
519 | } | |
520 | ||
521 | static inline void neo2200_accel_init(struct fb_info *info, | |
522 | struct fb_var_screeninfo *var) | |
523 | { | |
9f19bc56 | 524 | struct neofb_par *par = info->par; |
1da177e4 LT |
525 | Neo2200 __iomem *neo2200 = par->neo2200; |
526 | u32 bltMod, pitch; | |
527 | ||
528 | neo2200_sync(info); | |
529 | ||
530 | switch (var->bits_per_pixel) { | |
531 | case 8: | |
532 | bltMod = NEO_MODE1_DEPTH8; | |
533 | pitch = var->xres_virtual; | |
534 | break; | |
535 | case 15: | |
536 | case 16: | |
537 | bltMod = NEO_MODE1_DEPTH16; | |
538 | pitch = var->xres_virtual * 2; | |
539 | break; | |
540 | case 24: | |
541 | bltMod = NEO_MODE1_DEPTH24; | |
542 | pitch = var->xres_virtual * 3; | |
543 | break; | |
544 | default: | |
545 | printk(KERN_ERR | |
546 | "neofb: neo2200_accel_init: unexpected bits per pixel!\n"); | |
547 | return; | |
548 | } | |
549 | ||
550 | writel(bltMod << 16, &neo2200->bltStat); | |
551 | writel((pitch << 16) | pitch, &neo2200->pitch); | |
552 | } | |
553 | ||
554 | /* --------------------------------------------------------------------- */ | |
555 | ||
556 | static int | |
557 | neofb_open(struct fb_info *info, int user) | |
558 | { | |
9f19bc56 | 559 | struct neofb_par *par = info->par; |
1da177e4 | 560 | |
c4f28e54 JS |
561 | mutex_lock(&par->open_lock); |
562 | if (!par->ref_count) { | |
1da177e4 LT |
563 | memset(&par->state, 0, sizeof(struct vgastate)); |
564 | par->state.flags = VGA_SAVE_MODE | VGA_SAVE_FONTS; | |
565 | save_vga(&par->state); | |
566 | } | |
c4f28e54 JS |
567 | par->ref_count++; |
568 | mutex_unlock(&par->open_lock); | |
569 | ||
1da177e4 LT |
570 | return 0; |
571 | } | |
572 | ||
573 | static int | |
574 | neofb_release(struct fb_info *info, int user) | |
575 | { | |
9f19bc56 | 576 | struct neofb_par *par = info->par; |
1da177e4 | 577 | |
c4f28e54 JS |
578 | mutex_lock(&par->open_lock); |
579 | if (!par->ref_count) { | |
580 | mutex_unlock(&par->open_lock); | |
1da177e4 | 581 | return -EINVAL; |
c4f28e54 JS |
582 | } |
583 | if (par->ref_count == 1) { | |
1da177e4 LT |
584 | restore_vga(&par->state); |
585 | } | |
c4f28e54 JS |
586 | par->ref_count--; |
587 | mutex_unlock(&par->open_lock); | |
588 | ||
1da177e4 LT |
589 | return 0; |
590 | } | |
591 | ||
592 | static int | |
593 | neofb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) | |
594 | { | |
9f19bc56 | 595 | struct neofb_par *par = info->par; |
1da177e4 LT |
596 | int memlen, vramlen; |
597 | int mode_ok = 0; | |
598 | ||
599 | DBG("neofb_check_var"); | |
600 | ||
1ca6b62f | 601 | if (PICOS2KHZ(var->pixclock) > par->maxClock) |
1da177e4 LT |
602 | return -EINVAL; |
603 | ||
1da177e4 LT |
604 | /* Is the mode larger than the LCD panel? */ |
605 | if (par->internal_display && | |
606 | ((var->xres > par->NeoPanelWidth) || | |
607 | (var->yres > par->NeoPanelHeight))) { | |
608 | printk(KERN_INFO | |
609 | "Mode (%dx%d) larger than the LCD panel (%dx%d)\n", | |
610 | var->xres, var->yres, par->NeoPanelWidth, | |
611 | par->NeoPanelHeight); | |
612 | return -EINVAL; | |
613 | } | |
614 | ||
615 | /* Is the mode one of the acceptable sizes? */ | |
616 | if (!par->internal_display) | |
617 | mode_ok = 1; | |
618 | else { | |
619 | switch (var->xres) { | |
620 | case 1280: | |
621 | if (var->yres == 1024) | |
622 | mode_ok = 1; | |
623 | break; | |
624 | case 1024: | |
625 | if (var->yres == 768) | |
626 | mode_ok = 1; | |
627 | break; | |
628 | case 800: | |
629 | if (var->yres == (par->libretto ? 480 : 600)) | |
630 | mode_ok = 1; | |
631 | break; | |
632 | case 640: | |
633 | if (var->yres == 480) | |
634 | mode_ok = 1; | |
635 | break; | |
636 | } | |
637 | } | |
638 | ||
639 | if (!mode_ok) { | |
640 | printk(KERN_INFO | |
641 | "Mode (%dx%d) won't display properly on LCD\n", | |
642 | var->xres, var->yres); | |
643 | return -EINVAL; | |
644 | } | |
645 | ||
646 | var->red.msb_right = 0; | |
647 | var->green.msb_right = 0; | |
648 | var->blue.msb_right = 0; | |
41988d6e | 649 | var->transp.msb_right = 0; |
1da177e4 LT |
650 | |
651 | switch (var->bits_per_pixel) { | |
652 | case 8: /* PSEUDOCOLOUR, 256 */ | |
653 | var->transp.offset = 0; | |
654 | var->transp.length = 0; | |
655 | var->red.offset = 0; | |
656 | var->red.length = 8; | |
657 | var->green.offset = 0; | |
658 | var->green.length = 8; | |
659 | var->blue.offset = 0; | |
660 | var->blue.length = 8; | |
661 | break; | |
662 | ||
663 | case 16: /* DIRECTCOLOUR, 64k */ | |
664 | var->transp.offset = 0; | |
665 | var->transp.length = 0; | |
666 | var->red.offset = 11; | |
667 | var->red.length = 5; | |
668 | var->green.offset = 5; | |
669 | var->green.length = 6; | |
670 | var->blue.offset = 0; | |
671 | var->blue.length = 5; | |
672 | break; | |
673 | ||
674 | case 24: /* TRUECOLOUR, 16m */ | |
675 | var->transp.offset = 0; | |
676 | var->transp.length = 0; | |
677 | var->red.offset = 16; | |
678 | var->red.length = 8; | |
679 | var->green.offset = 8; | |
680 | var->green.length = 8; | |
681 | var->blue.offset = 0; | |
682 | var->blue.length = 8; | |
683 | break; | |
684 | ||
685 | #ifdef NO_32BIT_SUPPORT_YET | |
686 | case 32: /* TRUECOLOUR, 16m */ | |
687 | var->transp.offset = 24; | |
688 | var->transp.length = 8; | |
689 | var->red.offset = 16; | |
690 | var->red.length = 8; | |
691 | var->green.offset = 8; | |
692 | var->green.length = 8; | |
693 | var->blue.offset = 0; | |
694 | var->blue.length = 8; | |
695 | break; | |
696 | #endif | |
697 | default: | |
698 | printk(KERN_WARNING "neofb: no support for %dbpp\n", | |
699 | var->bits_per_pixel); | |
700 | return -EINVAL; | |
701 | } | |
702 | ||
703 | vramlen = info->fix.smem_len; | |
704 | if (vramlen > 4 * 1024 * 1024) | |
705 | vramlen = 4 * 1024 * 1024; | |
706 | ||
707 | if (var->yres_virtual < var->yres) | |
708 | var->yres_virtual = var->yres; | |
709 | if (var->xres_virtual < var->xres) | |
710 | var->xres_virtual = var->xres; | |
711 | ||
712 | memlen = var->xres_virtual * var->bits_per_pixel * var->yres_virtual >> 3; | |
713 | ||
714 | if (memlen > vramlen) { | |
715 | var->yres_virtual = vramlen * 8 / (var->xres_virtual * | |
716 | var->bits_per_pixel); | |
717 | memlen = var->xres_virtual * var->bits_per_pixel * | |
718 | var->yres_virtual / 8; | |
719 | } | |
720 | ||
721 | /* we must round yres/xres down, we already rounded y/xres_virtual up | |
722 | if it was possible. We should return -EINVAL, but I disagree */ | |
723 | if (var->yres_virtual < var->yres) | |
724 | var->yres = var->yres_virtual; | |
725 | if (var->xres_virtual < var->xres) | |
726 | var->xres = var->xres_virtual; | |
727 | if (var->xoffset + var->xres > var->xres_virtual) | |
728 | var->xoffset = var->xres_virtual - var->xres; | |
729 | if (var->yoffset + var->yres > var->yres_virtual) | |
730 | var->yoffset = var->yres_virtual - var->yres; | |
731 | ||
732 | var->nonstd = 0; | |
733 | var->height = -1; | |
734 | var->width = -1; | |
735 | ||
736 | if (var->bits_per_pixel >= 24 || !par->neo2200) | |
737 | var->accel_flags &= ~FB_ACCELF_TEXT; | |
738 | return 0; | |
739 | } | |
740 | ||
741 | static int neofb_set_par(struct fb_info *info) | |
742 | { | |
9f19bc56 | 743 | struct neofb_par *par = info->par; |
1da177e4 LT |
744 | unsigned char temp; |
745 | int i, clock_hi = 0; | |
746 | int lcd_stretch; | |
747 | int hoffset, voffset; | |
c6b044d6 | 748 | int vsync_start, vtotal; |
1da177e4 LT |
749 | |
750 | DBG("neofb_set_par"); | |
751 | ||
752 | neoUnlock(); | |
753 | ||
754 | vgaHWProtect(1); /* Blank the screen */ | |
755 | ||
c6b044d6 KH |
756 | vsync_start = info->var.yres + info->var.lower_margin; |
757 | vtotal = vsync_start + info->var.vsync_len + info->var.upper_margin; | |
1da177e4 LT |
758 | |
759 | /* | |
760 | * This will allocate the datastructure and initialize all of the | |
761 | * generic VGA registers. | |
762 | */ | |
763 | ||
c6b044d6 | 764 | if (vgaHWInit(&info->var, par)) |
1da177e4 LT |
765 | return -EINVAL; |
766 | ||
767 | /* | |
768 | * The default value assigned by vgaHW.c is 0x41, but this does | |
769 | * not work for NeoMagic. | |
770 | */ | |
771 | par->Attribute[16] = 0x01; | |
772 | ||
773 | switch (info->var.bits_per_pixel) { | |
774 | case 8: | |
775 | par->CRTC[0x13] = info->var.xres_virtual >> 3; | |
776 | par->ExtCRTOffset = info->var.xres_virtual >> 11; | |
777 | par->ExtColorModeSelect = 0x11; | |
778 | break; | |
779 | case 16: | |
780 | par->CRTC[0x13] = info->var.xres_virtual >> 2; | |
781 | par->ExtCRTOffset = info->var.xres_virtual >> 10; | |
782 | par->ExtColorModeSelect = 0x13; | |
783 | break; | |
784 | case 24: | |
785 | par->CRTC[0x13] = (info->var.xres_virtual * 3) >> 3; | |
786 | par->ExtCRTOffset = (info->var.xres_virtual * 3) >> 11; | |
787 | par->ExtColorModeSelect = 0x14; | |
788 | break; | |
789 | #ifdef NO_32BIT_SUPPORT_YET | |
790 | case 32: /* FIXME: guessed values */ | |
791 | par->CRTC[0x13] = info->var.xres_virtual >> 1; | |
792 | par->ExtCRTOffset = info->var.xres_virtual >> 9; | |
793 | par->ExtColorModeSelect = 0x15; | |
794 | break; | |
795 | #endif | |
796 | default: | |
797 | break; | |
798 | } | |
799 | ||
800 | par->ExtCRTDispAddr = 0x10; | |
801 | ||
802 | /* Vertical Extension */ | |
c6b044d6 KH |
803 | par->VerticalExt = (((vtotal - 2) & 0x400) >> 10) |
804 | | (((info->var.yres - 1) & 0x400) >> 9) | |
805 | | (((vsync_start) & 0x400) >> 8) | |
806 | | (((vsync_start) & 0x400) >> 7); | |
1da177e4 LT |
807 | |
808 | /* Fast write bursts on unless disabled. */ | |
809 | if (par->pci_burst) | |
810 | par->SysIfaceCntl1 = 0x30; | |
811 | else | |
812 | par->SysIfaceCntl1 = 0x00; | |
813 | ||
814 | par->SysIfaceCntl2 = 0xc0; /* VESA Bios sets this to 0x80! */ | |
815 | ||
9f672004 CT |
816 | /* Initialize: by default, we want display config register to be read */ |
817 | par->PanelDispCntlRegRead = 1; | |
818 | ||
1da177e4 LT |
819 | /* Enable any user specified display devices. */ |
820 | par->PanelDispCntlReg1 = 0x00; | |
821 | if (par->internal_display) | |
822 | par->PanelDispCntlReg1 |= 0x02; | |
823 | if (par->external_display) | |
824 | par->PanelDispCntlReg1 |= 0x01; | |
825 | ||
826 | /* If the user did not specify any display devices, then... */ | |
827 | if (par->PanelDispCntlReg1 == 0x00) { | |
828 | /* Default to internal (i.e., LCD) only. */ | |
4836f574 | 829 | par->PanelDispCntlReg1 = vga_rgfx(NULL, 0x20) & 0x03; |
1da177e4 LT |
830 | } |
831 | ||
832 | /* If we are using a fixed mode, then tell the chip we are. */ | |
833 | switch (info->var.xres) { | |
834 | case 1280: | |
835 | par->PanelDispCntlReg1 |= 0x60; | |
836 | break; | |
837 | case 1024: | |
838 | par->PanelDispCntlReg1 |= 0x40; | |
839 | break; | |
840 | case 800: | |
841 | par->PanelDispCntlReg1 |= 0x20; | |
842 | break; | |
843 | case 640: | |
844 | default: | |
845 | break; | |
846 | } | |
847 | ||
848 | /* Setup shadow register locking. */ | |
849 | switch (par->PanelDispCntlReg1 & 0x03) { | |
850 | case 0x01: /* External CRT only mode: */ | |
851 | par->GeneralLockReg = 0x00; | |
852 | /* We need to program the VCLK for external display only mode. */ | |
853 | par->ProgramVCLK = 1; | |
854 | break; | |
855 | case 0x02: /* Internal LCD only mode: */ | |
856 | case 0x03: /* Simultaneous internal/external (LCD/CRT) mode: */ | |
857 | par->GeneralLockReg = 0x01; | |
858 | /* Don't program the VCLK when using the LCD. */ | |
859 | par->ProgramVCLK = 0; | |
860 | break; | |
861 | } | |
862 | ||
863 | /* | |
864 | * If the screen is to be stretched, turn on stretching for the | |
865 | * various modes. | |
866 | * | |
867 | * OPTION_LCD_STRETCH means stretching should be turned off! | |
868 | */ | |
869 | par->PanelDispCntlReg2 = 0x00; | |
870 | par->PanelDispCntlReg3 = 0x00; | |
871 | ||
872 | if (par->lcd_stretch && (par->PanelDispCntlReg1 == 0x02) && /* LCD only */ | |
873 | (info->var.xres != par->NeoPanelWidth)) { | |
874 | switch (info->var.xres) { | |
875 | case 320: /* Needs testing. KEM -- 24 May 98 */ | |
876 | case 400: /* Needs testing. KEM -- 24 May 98 */ | |
877 | case 640: | |
878 | case 800: | |
879 | case 1024: | |
880 | lcd_stretch = 1; | |
881 | par->PanelDispCntlReg2 |= 0xC6; | |
882 | break; | |
883 | default: | |
884 | lcd_stretch = 0; | |
885 | /* No stretching in these modes. */ | |
886 | } | |
887 | } else | |
888 | lcd_stretch = 0; | |
889 | ||
890 | /* | |
891 | * If the screen is to be centerd, turn on the centering for the | |
892 | * various modes. | |
893 | */ | |
894 | par->PanelVertCenterReg1 = 0x00; | |
895 | par->PanelVertCenterReg2 = 0x00; | |
896 | par->PanelVertCenterReg3 = 0x00; | |
897 | par->PanelVertCenterReg4 = 0x00; | |
898 | par->PanelVertCenterReg5 = 0x00; | |
899 | par->PanelHorizCenterReg1 = 0x00; | |
900 | par->PanelHorizCenterReg2 = 0x00; | |
901 | par->PanelHorizCenterReg3 = 0x00; | |
902 | par->PanelHorizCenterReg4 = 0x00; | |
903 | par->PanelHorizCenterReg5 = 0x00; | |
904 | ||
905 | ||
906 | if (par->PanelDispCntlReg1 & 0x02) { | |
907 | if (info->var.xres == par->NeoPanelWidth) { | |
908 | /* | |
909 | * No centering required when the requested display width | |
910 | * equals the panel width. | |
911 | */ | |
912 | } else { | |
913 | par->PanelDispCntlReg2 |= 0x01; | |
914 | par->PanelDispCntlReg3 |= 0x10; | |
915 | ||
916 | /* Calculate the horizontal and vertical offsets. */ | |
917 | if (!lcd_stretch) { | |
918 | hoffset = | |
919 | ((par->NeoPanelWidth - | |
920 | info->var.xres) >> 4) - 1; | |
921 | voffset = | |
922 | ((par->NeoPanelHeight - | |
923 | info->var.yres) >> 1) - 2; | |
924 | } else { | |
925 | /* Stretched modes cannot be centered. */ | |
926 | hoffset = 0; | |
927 | voffset = 0; | |
928 | } | |
929 | ||
930 | switch (info->var.xres) { | |
931 | case 320: /* Needs testing. KEM -- 24 May 98 */ | |
932 | par->PanelHorizCenterReg3 = hoffset; | |
933 | par->PanelVertCenterReg2 = voffset; | |
934 | break; | |
935 | case 400: /* Needs testing. KEM -- 24 May 98 */ | |
936 | par->PanelHorizCenterReg4 = hoffset; | |
937 | par->PanelVertCenterReg1 = voffset; | |
938 | break; | |
939 | case 640: | |
940 | par->PanelHorizCenterReg1 = hoffset; | |
941 | par->PanelVertCenterReg3 = voffset; | |
942 | break; | |
943 | case 800: | |
944 | par->PanelHorizCenterReg2 = hoffset; | |
945 | par->PanelVertCenterReg4 = voffset; | |
946 | break; | |
947 | case 1024: | |
948 | par->PanelHorizCenterReg5 = hoffset; | |
949 | par->PanelVertCenterReg5 = voffset; | |
950 | break; | |
951 | case 1280: | |
952 | default: | |
953 | /* No centering in these modes. */ | |
954 | break; | |
955 | } | |
956 | } | |
957 | } | |
958 | ||
959 | par->biosMode = | |
960 | neoFindMode(info->var.xres, info->var.yres, | |
961 | info->var.bits_per_pixel); | |
962 | ||
963 | /* | |
964 | * Calculate the VCLK that most closely matches the requested dot | |
965 | * clock. | |
966 | */ | |
c6b044d6 | 967 | neoCalcVCLK(info, par, PICOS2KHZ(info->var.pixclock)); |
1da177e4 LT |
968 | |
969 | /* Since we program the clocks ourselves, always use VCLK3. */ | |
970 | par->MiscOutReg |= 0x0C; | |
971 | ||
972 | /* alread unlocked above */ | |
973 | /* BOGUS vga_wgfx(NULL, 0x09, 0x26); */ | |
974 | ||
975 | /* don't know what this is, but it's 0 from bootup anyway */ | |
976 | vga_wgfx(NULL, 0x15, 0x00); | |
977 | ||
978 | /* was set to 0x01 by my bios in text and vesa modes */ | |
979 | vga_wgfx(NULL, 0x0A, par->GeneralLockReg); | |
980 | ||
981 | /* | |
982 | * The color mode needs to be set before calling vgaHWRestore | |
983 | * to ensure the DAC is initialized properly. | |
984 | * | |
985 | * NOTE: Make sure we don't change bits make sure we don't change | |
986 | * any reserved bits. | |
987 | */ | |
988 | temp = vga_rgfx(NULL, 0x90); | |
989 | switch (info->fix.accel) { | |
990 | case FB_ACCEL_NEOMAGIC_NM2070: | |
991 | temp &= 0xF0; /* Save bits 7:4 */ | |
992 | temp |= (par->ExtColorModeSelect & ~0xF0); | |
993 | break; | |
994 | case FB_ACCEL_NEOMAGIC_NM2090: | |
995 | case FB_ACCEL_NEOMAGIC_NM2093: | |
996 | case FB_ACCEL_NEOMAGIC_NM2097: | |
997 | case FB_ACCEL_NEOMAGIC_NM2160: | |
998 | case FB_ACCEL_NEOMAGIC_NM2200: | |
999 | case FB_ACCEL_NEOMAGIC_NM2230: | |
1000 | case FB_ACCEL_NEOMAGIC_NM2360: | |
1001 | case FB_ACCEL_NEOMAGIC_NM2380: | |
1002 | temp &= 0x70; /* Save bits 6:4 */ | |
1003 | temp |= (par->ExtColorModeSelect & ~0x70); | |
1004 | break; | |
1005 | } | |
1006 | ||
1007 | vga_wgfx(NULL, 0x90, temp); | |
1008 | ||
1009 | /* | |
1010 | * In some rare cases a lockup might occur if we don't delay | |
1011 | * here. (Reported by Miles Lane) | |
1012 | */ | |
1013 | //mdelay(200); | |
1014 | ||
1015 | /* | |
1016 | * Disable horizontal and vertical graphics and text expansions so | |
1017 | * that vgaHWRestore works properly. | |
1018 | */ | |
1019 | temp = vga_rgfx(NULL, 0x25); | |
1020 | temp &= 0x39; | |
1021 | vga_wgfx(NULL, 0x25, temp); | |
1022 | ||
1023 | /* | |
1024 | * Sleep for 200ms to make sure that the two operations above have | |
1025 | * had time to take effect. | |
1026 | */ | |
1027 | mdelay(200); | |
1028 | ||
1029 | /* | |
1030 | * This function handles restoring the generic VGA registers. */ | |
1031 | vgaHWRestore(info, par); | |
1032 | ||
1033 | /* linear colormap for non palettized modes */ | |
1034 | switch (info->var.bits_per_pixel) { | |
1035 | case 8: | |
1036 | /* PseudoColor, 256 */ | |
1037 | info->fix.visual = FB_VISUAL_PSEUDOCOLOR; | |
1038 | break; | |
1039 | case 16: | |
1040 | /* TrueColor, 64k */ | |
1041 | info->fix.visual = FB_VISUAL_TRUECOLOR; | |
1042 | ||
1043 | for (i = 0; i < 64; i++) { | |
1044 | outb(i, 0x3c8); | |
1045 | ||
1046 | outb(i << 1, 0x3c9); | |
1047 | outb(i, 0x3c9); | |
1048 | outb(i << 1, 0x3c9); | |
1049 | } | |
1050 | break; | |
1051 | case 24: | |
1052 | #ifdef NO_32BIT_SUPPORT_YET | |
1053 | case 32: | |
1054 | #endif | |
1055 | /* TrueColor, 16m */ | |
1056 | info->fix.visual = FB_VISUAL_TRUECOLOR; | |
1057 | ||
1058 | for (i = 0; i < 256; i++) { | |
1059 | outb(i, 0x3c8); | |
1060 | ||
1061 | outb(i, 0x3c9); | |
1062 | outb(i, 0x3c9); | |
1063 | outb(i, 0x3c9); | |
1064 | } | |
1065 | break; | |
1066 | } | |
1067 | ||
1068 | vga_wgfx(NULL, 0x0E, par->ExtCRTDispAddr); | |
1069 | vga_wgfx(NULL, 0x0F, par->ExtCRTOffset); | |
1070 | temp = vga_rgfx(NULL, 0x10); | |
1071 | temp &= 0x0F; /* Save bits 3:0 */ | |
1072 | temp |= (par->SysIfaceCntl1 & ~0x0F); /* VESA Bios sets bit 1! */ | |
1073 | vga_wgfx(NULL, 0x10, temp); | |
1074 | ||
1075 | vga_wgfx(NULL, 0x11, par->SysIfaceCntl2); | |
1076 | vga_wgfx(NULL, 0x15, 0 /*par->SingleAddrPage */ ); | |
1077 | vga_wgfx(NULL, 0x16, 0 /*par->DualAddrPage */ ); | |
1078 | ||
1079 | temp = vga_rgfx(NULL, 0x20); | |
1080 | switch (info->fix.accel) { | |
1081 | case FB_ACCEL_NEOMAGIC_NM2070: | |
1082 | temp &= 0xFC; /* Save bits 7:2 */ | |
1083 | temp |= (par->PanelDispCntlReg1 & ~0xFC); | |
1084 | break; | |
1085 | case FB_ACCEL_NEOMAGIC_NM2090: | |
1086 | case FB_ACCEL_NEOMAGIC_NM2093: | |
1087 | case FB_ACCEL_NEOMAGIC_NM2097: | |
1088 | case FB_ACCEL_NEOMAGIC_NM2160: | |
1089 | temp &= 0xDC; /* Save bits 7:6,4:2 */ | |
1090 | temp |= (par->PanelDispCntlReg1 & ~0xDC); | |
1091 | break; | |
1092 | case FB_ACCEL_NEOMAGIC_NM2200: | |
1093 | case FB_ACCEL_NEOMAGIC_NM2230: | |
1094 | case FB_ACCEL_NEOMAGIC_NM2360: | |
1095 | case FB_ACCEL_NEOMAGIC_NM2380: | |
1096 | temp &= 0x98; /* Save bits 7,4:3 */ | |
1097 | temp |= (par->PanelDispCntlReg1 & ~0x98); | |
1098 | break; | |
1099 | } | |
1100 | vga_wgfx(NULL, 0x20, temp); | |
1101 | ||
1102 | temp = vga_rgfx(NULL, 0x25); | |
1103 | temp &= 0x38; /* Save bits 5:3 */ | |
1104 | temp |= (par->PanelDispCntlReg2 & ~0x38); | |
1105 | vga_wgfx(NULL, 0x25, temp); | |
1106 | ||
1107 | if (info->fix.accel != FB_ACCEL_NEOMAGIC_NM2070) { | |
1108 | temp = vga_rgfx(NULL, 0x30); | |
1109 | temp &= 0xEF; /* Save bits 7:5 and bits 3:0 */ | |
1110 | temp |= (par->PanelDispCntlReg3 & ~0xEF); | |
1111 | vga_wgfx(NULL, 0x30, temp); | |
1112 | } | |
1113 | ||
1114 | vga_wgfx(NULL, 0x28, par->PanelVertCenterReg1); | |
1115 | vga_wgfx(NULL, 0x29, par->PanelVertCenterReg2); | |
1116 | vga_wgfx(NULL, 0x2a, par->PanelVertCenterReg3); | |
1117 | ||
1118 | if (info->fix.accel != FB_ACCEL_NEOMAGIC_NM2070) { | |
1119 | vga_wgfx(NULL, 0x32, par->PanelVertCenterReg4); | |
1120 | vga_wgfx(NULL, 0x33, par->PanelHorizCenterReg1); | |
1121 | vga_wgfx(NULL, 0x34, par->PanelHorizCenterReg2); | |
1122 | vga_wgfx(NULL, 0x35, par->PanelHorizCenterReg3); | |
1123 | } | |
1124 | ||
1125 | if (info->fix.accel == FB_ACCEL_NEOMAGIC_NM2160) | |
1126 | vga_wgfx(NULL, 0x36, par->PanelHorizCenterReg4); | |
1127 | ||
1128 | if (info->fix.accel == FB_ACCEL_NEOMAGIC_NM2200 || | |
1129 | info->fix.accel == FB_ACCEL_NEOMAGIC_NM2230 || | |
1130 | info->fix.accel == FB_ACCEL_NEOMAGIC_NM2360 || | |
1131 | info->fix.accel == FB_ACCEL_NEOMAGIC_NM2380) { | |
1132 | vga_wgfx(NULL, 0x36, par->PanelHorizCenterReg4); | |
1133 | vga_wgfx(NULL, 0x37, par->PanelVertCenterReg5); | |
1134 | vga_wgfx(NULL, 0x38, par->PanelHorizCenterReg5); | |
1135 | ||
1136 | clock_hi = 1; | |
1137 | } | |
1138 | ||
1139 | /* Program VCLK3 if needed. */ | |
1140 | if (par->ProgramVCLK && ((vga_rgfx(NULL, 0x9B) != par->VCLK3NumeratorLow) | |
1141 | || (vga_rgfx(NULL, 0x9F) != par->VCLK3Denominator) | |
1142 | || (clock_hi && ((vga_rgfx(NULL, 0x8F) & ~0x0f) | |
1143 | != (par->VCLK3NumeratorHigh & | |
1144 | ~0x0F))))) { | |
1145 | vga_wgfx(NULL, 0x9B, par->VCLK3NumeratorLow); | |
1146 | if (clock_hi) { | |
1147 | temp = vga_rgfx(NULL, 0x8F); | |
1148 | temp &= 0x0F; /* Save bits 3:0 */ | |
1149 | temp |= (par->VCLK3NumeratorHigh & ~0x0F); | |
1150 | vga_wgfx(NULL, 0x8F, temp); | |
1151 | } | |
1152 | vga_wgfx(NULL, 0x9F, par->VCLK3Denominator); | |
1153 | } | |
1154 | ||
1155 | if (par->biosMode) | |
1156 | vga_wcrt(NULL, 0x23, par->biosMode); | |
1157 | ||
1158 | vga_wgfx(NULL, 0x93, 0xc0); /* Gives 5x faster framebuffer writes !!! */ | |
1159 | ||
1160 | /* Program vertical extension register */ | |
1161 | if (info->fix.accel == FB_ACCEL_NEOMAGIC_NM2200 || | |
1162 | info->fix.accel == FB_ACCEL_NEOMAGIC_NM2230 || | |
1163 | info->fix.accel == FB_ACCEL_NEOMAGIC_NM2360 || | |
1164 | info->fix.accel == FB_ACCEL_NEOMAGIC_NM2380) { | |
1165 | vga_wcrt(NULL, 0x70, par->VerticalExt); | |
1166 | } | |
1167 | ||
1168 | vgaHWProtect(0); /* Turn on screen */ | |
1169 | ||
1170 | /* Calling this also locks offset registers required in update_start */ | |
1171 | neoLock(&par->state); | |
1172 | ||
1173 | info->fix.line_length = | |
1174 | info->var.xres_virtual * (info->var.bits_per_pixel >> 3); | |
1175 | ||
1176 | switch (info->fix.accel) { | |
1177 | case FB_ACCEL_NEOMAGIC_NM2200: | |
1178 | case FB_ACCEL_NEOMAGIC_NM2230: | |
1179 | case FB_ACCEL_NEOMAGIC_NM2360: | |
1180 | case FB_ACCEL_NEOMAGIC_NM2380: | |
1181 | neo2200_accel_init(info, &info->var); | |
1182 | break; | |
1183 | default: | |
1184 | break; | |
1185 | } | |
1186 | return 0; | |
1187 | } | |
1188 | ||
1189 | static void neofb_update_start(struct fb_info *info, | |
1190 | struct fb_var_screeninfo *var) | |
1191 | { | |
9f19bc56 | 1192 | struct neofb_par *par = info->par; |
1da177e4 LT |
1193 | struct vgastate *state = &par->state; |
1194 | int oldExtCRTDispAddr; | |
1195 | int Base; | |
1196 | ||
1197 | DBG("neofb_update_start"); | |
1198 | ||
1199 | Base = (var->yoffset * var->xres_virtual + var->xoffset) >> 2; | |
1200 | Base *= (var->bits_per_pixel + 7) / 8; | |
1201 | ||
1202 | neoUnlock(); | |
1203 | ||
1204 | /* | |
1205 | * These are the generic starting address registers. | |
1206 | */ | |
1207 | vga_wcrt(state->vgabase, 0x0C, (Base & 0x00FF00) >> 8); | |
1208 | vga_wcrt(state->vgabase, 0x0D, (Base & 0x00FF)); | |
1209 | ||
1210 | /* | |
1211 | * Make sure we don't clobber some other bits that might already | |
1212 | * have been set. NOTE: NM2200 has a writable bit 3, but it shouldn't | |
1213 | * be needed. | |
1214 | */ | |
1215 | oldExtCRTDispAddr = vga_rgfx(NULL, 0x0E); | |
1216 | vga_wgfx(state->vgabase, 0x0E, (((Base >> 16) & 0x0f) | (oldExtCRTDispAddr & 0xf0))); | |
1217 | ||
1218 | neoLock(state); | |
1219 | } | |
1220 | ||
1221 | /* | |
1222 | * Pan or Wrap the Display | |
1223 | */ | |
1224 | static int neofb_pan_display(struct fb_var_screeninfo *var, | |
1225 | struct fb_info *info) | |
1226 | { | |
1227 | u_int y_bottom; | |
1228 | ||
1229 | y_bottom = var->yoffset; | |
1230 | ||
1231 | if (!(var->vmode & FB_VMODE_YWRAP)) | |
1232 | y_bottom += var->yres; | |
1233 | ||
1234 | if (var->xoffset > (var->xres_virtual - var->xres)) | |
1235 | return -EINVAL; | |
1236 | if (y_bottom > info->var.yres_virtual) | |
1237 | return -EINVAL; | |
1238 | ||
1239 | neofb_update_start(info, var); | |
1240 | ||
1241 | info->var.xoffset = var->xoffset; | |
1242 | info->var.yoffset = var->yoffset; | |
1243 | ||
1244 | if (var->vmode & FB_VMODE_YWRAP) | |
1245 | info->var.vmode |= FB_VMODE_YWRAP; | |
1246 | else | |
1247 | info->var.vmode &= ~FB_VMODE_YWRAP; | |
1248 | return 0; | |
1249 | } | |
1250 | ||
1251 | static int neofb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, | |
1252 | u_int transp, struct fb_info *fb) | |
1253 | { | |
1254 | if (regno >= fb->cmap.len || regno > 255) | |
1255 | return -EINVAL; | |
1256 | ||
a2b7d2e9 | 1257 | if (fb->var.bits_per_pixel <= 8) { |
1da177e4 LT |
1258 | outb(regno, 0x3c8); |
1259 | ||
1260 | outb(red >> 10, 0x3c9); | |
1261 | outb(green >> 10, 0x3c9); | |
1262 | outb(blue >> 10, 0x3c9); | |
a2b7d2e9 AD |
1263 | } else if (regno < 16) { |
1264 | switch (fb->var.bits_per_pixel) { | |
1265 | case 16: | |
1266 | ((u32 *) fb->pseudo_palette)[regno] = | |
1da177e4 LT |
1267 | ((red & 0xf800)) | ((green & 0xfc00) >> 5) | |
1268 | ((blue & 0xf800) >> 11); | |
a2b7d2e9 AD |
1269 | break; |
1270 | case 24: | |
1271 | ((u32 *) fb->pseudo_palette)[regno] = | |
1da177e4 LT |
1272 | ((red & 0xff00) << 8) | ((green & 0xff00)) | |
1273 | ((blue & 0xff00) >> 8); | |
a2b7d2e9 | 1274 | break; |
1da177e4 | 1275 | #ifdef NO_32BIT_SUPPORT_YET |
a2b7d2e9 AD |
1276 | case 32: |
1277 | ((u32 *) fb->pseudo_palette)[regno] = | |
1da177e4 LT |
1278 | ((transp & 0xff00) << 16) | ((red & 0xff00) << 8) | |
1279 | ((green & 0xff00)) | ((blue & 0xff00) >> 8); | |
a2b7d2e9 | 1280 | break; |
1da177e4 | 1281 | #endif |
a2b7d2e9 AD |
1282 | default: |
1283 | return 1; | |
1284 | } | |
1da177e4 | 1285 | } |
a2b7d2e9 | 1286 | |
1da177e4 LT |
1287 | return 0; |
1288 | } | |
1289 | ||
1290 | /* | |
1291 | * (Un)Blank the display. | |
1292 | */ | |
1293 | static int neofb_blank(int blank_mode, struct fb_info *info) | |
1294 | { | |
1295 | /* | |
1296 | * Blank the screen if blank_mode != 0, else unblank. | |
1297 | * Return 0 if blanking succeeded, != 0 if un-/blanking failed due to | |
1298 | * e.g. a video mode which doesn't support it. Implements VESA suspend | |
1299 | * and powerdown modes for monitors, and backlight control on LCDs. | |
1300 | * blank_mode == 0: unblanked (backlight on) | |
1301 | * blank_mode == 1: blank (backlight on) | |
1302 | * blank_mode == 2: suspend vsync (backlight off) | |
1303 | * blank_mode == 3: suspend hsync (backlight off) | |
1304 | * blank_mode == 4: powerdown (backlight off) | |
1305 | * | |
1306 | * wms...Enable VESA DPMS compatible powerdown mode | |
1307 | * run "setterm -powersave powerdown" to take advantage | |
1308 | */ | |
9f19bc56 | 1309 | struct neofb_par *par = info->par; |
4efefd1d | 1310 | int seqflags, lcdflags, dpmsflags, reg, tmpdisp; |
9f672004 | 1311 | |
10ee39fe | 1312 | /* |
4efefd1d CT |
1313 | * Read back the register bits related to display configuration. They might |
1314 | * have been changed underneath the driver via Fn key stroke. | |
1315 | */ | |
1316 | neoUnlock(); | |
1317 | tmpdisp = vga_rgfx(NULL, 0x20) & 0x03; | |
1318 | neoLock(&par->state); | |
1319 | ||
1320 | /* In case we blank the screen, we want to store the possibly new | |
1321 | * configuration in the driver. During un-blank, we re-apply this setting, | |
1322 | * since the LCD bit will be cleared in order to switch off the backlight. | |
10ee39fe | 1323 | */ |
9f672004 | 1324 | if (par->PanelDispCntlRegRead) { |
4efefd1d | 1325 | par->PanelDispCntlReg1 = tmpdisp; |
9f672004 CT |
1326 | } |
1327 | par->PanelDispCntlRegRead = !blank_mode; | |
10ee39fe | 1328 | |
1da177e4 LT |
1329 | switch (blank_mode) { |
1330 | case FB_BLANK_POWERDOWN: /* powerdown - both sync lines down */ | |
1331 | seqflags = VGA_SR01_SCREEN_OFF; /* Disable sequencer */ | |
1332 | lcdflags = 0; /* LCD off */ | |
1333 | dpmsflags = NEO_GR01_SUPPRESS_HSYNC | | |
1334 | NEO_GR01_SUPPRESS_VSYNC; | |
1335 | #ifdef CONFIG_TOSHIBA | |
1336 | /* Do we still need this ? */ | |
1337 | /* attempt to turn off backlight on toshiba; also turns off external */ | |
1338 | { | |
1339 | SMMRegisters regs; | |
1340 | ||
1341 | regs.eax = 0xff00; /* HCI_SET */ | |
1342 | regs.ebx = 0x0002; /* HCI_BACKLIGHT */ | |
1343 | regs.ecx = 0x0000; /* HCI_DISABLE */ | |
1344 | tosh_smm(®s); | |
1345 | } | |
1346 | #endif | |
1347 | break; | |
1348 | case FB_BLANK_HSYNC_SUSPEND: /* hsync off */ | |
1349 | seqflags = VGA_SR01_SCREEN_OFF; /* Disable sequencer */ | |
1350 | lcdflags = 0; /* LCD off */ | |
1351 | dpmsflags = NEO_GR01_SUPPRESS_HSYNC; | |
1352 | break; | |
1353 | case FB_BLANK_VSYNC_SUSPEND: /* vsync off */ | |
1354 | seqflags = VGA_SR01_SCREEN_OFF; /* Disable sequencer */ | |
1355 | lcdflags = 0; /* LCD off */ | |
1356 | dpmsflags = NEO_GR01_SUPPRESS_VSYNC; | |
1357 | break; | |
1358 | case FB_BLANK_NORMAL: /* just blank screen (backlight stays on) */ | |
1359 | seqflags = VGA_SR01_SCREEN_OFF; /* Disable sequencer */ | |
4efefd1d CT |
1360 | /* |
1361 | * During a blank operation with the LID shut, we might store "LCD off" | |
1362 | * by mistake. Due to timing issues, the BIOS may switch the lights | |
1363 | * back on, and we turn it back off once we "unblank". | |
1364 | * | |
1365 | * So here is an attempt to implement ">=" - if we are in the process | |
1366 | * of unblanking, and the LCD bit is unset in the driver but set in the | |
1367 | * register, we must keep it. | |
1368 | */ | |
1369 | lcdflags = ((par->PanelDispCntlReg1 | tmpdisp) & 0x02); /* LCD normal */ | |
10ee39fe | 1370 | dpmsflags = 0x00; /* no hsync/vsync suppression */ |
1da177e4 LT |
1371 | break; |
1372 | case FB_BLANK_UNBLANK: /* unblank */ | |
1373 | seqflags = 0; /* Enable sequencer */ | |
4efefd1d | 1374 | lcdflags = ((par->PanelDispCntlReg1 | tmpdisp) & 0x02); /* LCD normal */ |
1da177e4 LT |
1375 | dpmsflags = 0x00; /* no hsync/vsync suppression */ |
1376 | #ifdef CONFIG_TOSHIBA | |
1377 | /* Do we still need this ? */ | |
1378 | /* attempt to re-enable backlight/external on toshiba */ | |
1379 | { | |
1380 | SMMRegisters regs; | |
1381 | ||
1382 | regs.eax = 0xff00; /* HCI_SET */ | |
1383 | regs.ebx = 0x0002; /* HCI_BACKLIGHT */ | |
1384 | regs.ecx = 0x0001; /* HCI_ENABLE */ | |
1385 | tosh_smm(®s); | |
1386 | } | |
1387 | #endif | |
1388 | break; | |
1389 | default: /* Anything else we don't understand; return 1 to tell | |
1390 | * fb_blank we didn't aactually do anything */ | |
1391 | return 1; | |
1392 | } | |
1393 | ||
1394 | neoUnlock(); | |
1395 | reg = (vga_rseq(NULL, 0x01) & ~0x20) | seqflags; | |
1396 | vga_wseq(NULL, 0x01, reg); | |
1397 | reg = (vga_rgfx(NULL, 0x20) & ~0x02) | lcdflags; | |
1398 | vga_wgfx(NULL, 0x20, reg); | |
1399 | reg = (vga_rgfx(NULL, 0x01) & ~0xF0) | 0x80 | dpmsflags; | |
1400 | vga_wgfx(NULL, 0x01, reg); | |
1401 | neoLock(&par->state); | |
1402 | return 0; | |
1403 | } | |
1404 | ||
1405 | static void | |
1406 | neo2200_fillrect(struct fb_info *info, const struct fb_fillrect *rect) | |
1407 | { | |
9f19bc56 | 1408 | struct neofb_par *par = info->par; |
1da177e4 LT |
1409 | u_long dst, rop; |
1410 | ||
1411 | dst = rect->dx + rect->dy * info->var.xres_virtual; | |
1412 | rop = rect->rop ? 0x060000 : 0x0c0000; | |
1413 | ||
1414 | neo2200_wait_fifo(info, 4); | |
1415 | ||
1416 | /* set blt control */ | |
1417 | writel(NEO_BC3_FIFO_EN | | |
1418 | NEO_BC0_SRC_IS_FG | NEO_BC3_SKIP_MAPPING | | |
1419 | // NEO_BC3_DST_XY_ADDR | | |
1420 | // NEO_BC3_SRC_XY_ADDR | | |
1421 | rop, &par->neo2200->bltCntl); | |
1422 | ||
1423 | switch (info->var.bits_per_pixel) { | |
1424 | case 8: | |
1425 | writel(rect->color, &par->neo2200->fgColor); | |
1426 | break; | |
1427 | case 16: | |
1428 | case 24: | |
1429 | writel(((u32 *) (info->pseudo_palette))[rect->color], | |
1430 | &par->neo2200->fgColor); | |
1431 | break; | |
1432 | } | |
1433 | ||
1434 | writel(dst * ((info->var.bits_per_pixel + 7) >> 3), | |
1435 | &par->neo2200->dstStart); | |
1436 | writel((rect->height << 16) | (rect->width & 0xffff), | |
1437 | &par->neo2200->xyExt); | |
1438 | } | |
1439 | ||
1440 | static void | |
1441 | neo2200_copyarea(struct fb_info *info, const struct fb_copyarea *area) | |
1442 | { | |
1443 | u32 sx = area->sx, sy = area->sy, dx = area->dx, dy = area->dy; | |
9f19bc56 | 1444 | struct neofb_par *par = info->par; |
1da177e4 LT |
1445 | u_long src, dst, bltCntl; |
1446 | ||
1447 | bltCntl = NEO_BC3_FIFO_EN | NEO_BC3_SKIP_MAPPING | 0x0C0000; | |
1448 | ||
1449 | if ((dy > sy) || ((dy == sy) && (dx > sx))) { | |
1450 | /* Start with the lower right corner */ | |
1451 | sy += (area->height - 1); | |
1452 | dy += (area->height - 1); | |
1453 | sx += (area->width - 1); | |
1454 | dx += (area->width - 1); | |
1455 | ||
1456 | bltCntl |= NEO_BC0_X_DEC | NEO_BC0_DST_Y_DEC | NEO_BC0_SRC_Y_DEC; | |
1457 | } | |
1458 | ||
1459 | src = sx * (info->var.bits_per_pixel >> 3) + sy*info->fix.line_length; | |
1460 | dst = dx * (info->var.bits_per_pixel >> 3) + dy*info->fix.line_length; | |
1461 | ||
1462 | neo2200_wait_fifo(info, 4); | |
1463 | ||
1464 | /* set blt control */ | |
1465 | writel(bltCntl, &par->neo2200->bltCntl); | |
1466 | ||
1467 | writel(src, &par->neo2200->srcStart); | |
1468 | writel(dst, &par->neo2200->dstStart); | |
1469 | writel((area->height << 16) | (area->width & 0xffff), | |
1470 | &par->neo2200->xyExt); | |
1471 | } | |
1472 | ||
1473 | static void | |
1474 | neo2200_imageblit(struct fb_info *info, const struct fb_image *image) | |
1475 | { | |
9f19bc56 | 1476 | struct neofb_par *par = info->par; |
1da177e4 LT |
1477 | int s_pitch = (image->width * image->depth + 7) >> 3; |
1478 | int scan_align = info->pixmap.scan_align - 1; | |
1479 | int buf_align = info->pixmap.buf_align - 1; | |
1480 | int bltCntl_flags, d_pitch, data_len; | |
1481 | ||
1482 | // The data is padded for the hardware | |
1483 | d_pitch = (s_pitch + scan_align) & ~scan_align; | |
1484 | data_len = ((d_pitch * image->height) + buf_align) & ~buf_align; | |
1485 | ||
1486 | neo2200_sync(info); | |
1487 | ||
1488 | if (image->depth == 1) { | |
1489 | if (info->var.bits_per_pixel == 24 && image->width < 16) { | |
1490 | /* FIXME. There is a bug with accelerated color-expanded | |
1491 | * transfers in 24 bit mode if the image being transferred | |
1492 | * is less than 16 bits wide. This is due to insufficient | |
1493 | * padding when writing the image. We need to adjust | |
1494 | * struct fb_pixmap. Not yet done. */ | |
1495 | return cfb_imageblit(info, image); | |
1496 | } | |
1497 | bltCntl_flags = NEO_BC0_SRC_MONO; | |
1498 | } else if (image->depth == info->var.bits_per_pixel) { | |
1499 | bltCntl_flags = 0; | |
1500 | } else { | |
1501 | /* We don't currently support hardware acceleration if image | |
1502 | * depth is different from display */ | |
1503 | return cfb_imageblit(info, image); | |
1504 | } | |
1505 | ||
1506 | switch (info->var.bits_per_pixel) { | |
1507 | case 8: | |
1508 | writel(image->fg_color, &par->neo2200->fgColor); | |
1509 | writel(image->bg_color, &par->neo2200->bgColor); | |
1510 | break; | |
1511 | case 16: | |
1512 | case 24: | |
1513 | writel(((u32 *) (info->pseudo_palette))[image->fg_color], | |
1514 | &par->neo2200->fgColor); | |
1515 | writel(((u32 *) (info->pseudo_palette))[image->bg_color], | |
1516 | &par->neo2200->bgColor); | |
1517 | break; | |
1518 | } | |
1519 | ||
1520 | writel(NEO_BC0_SYS_TO_VID | | |
1521 | NEO_BC3_SKIP_MAPPING | bltCntl_flags | | |
1522 | // NEO_BC3_DST_XY_ADDR | | |
1523 | 0x0c0000, &par->neo2200->bltCntl); | |
1524 | ||
1525 | writel(0, &par->neo2200->srcStart); | |
1526 | // par->neo2200->dstStart = (image->dy << 16) | (image->dx & 0xffff); | |
1527 | writel(((image->dx & 0xffff) * (info->var.bits_per_pixel >> 3) + | |
1528 | image->dy * info->fix.line_length), &par->neo2200->dstStart); | |
1529 | writel((image->height << 16) | (image->width & 0xffff), | |
1530 | &par->neo2200->xyExt); | |
1531 | ||
1532 | memcpy_toio(par->mmio_vbase + 0x100000, image->data, data_len); | |
1533 | } | |
1534 | ||
1535 | static void | |
1536 | neofb_fillrect(struct fb_info *info, const struct fb_fillrect *rect) | |
1537 | { | |
1538 | switch (info->fix.accel) { | |
1539 | case FB_ACCEL_NEOMAGIC_NM2200: | |
1540 | case FB_ACCEL_NEOMAGIC_NM2230: | |
1541 | case FB_ACCEL_NEOMAGIC_NM2360: | |
1542 | case FB_ACCEL_NEOMAGIC_NM2380: | |
1543 | neo2200_fillrect(info, rect); | |
1544 | break; | |
1545 | default: | |
1546 | cfb_fillrect(info, rect); | |
1547 | break; | |
1548 | } | |
1549 | } | |
1550 | ||
1551 | static void | |
1552 | neofb_copyarea(struct fb_info *info, const struct fb_copyarea *area) | |
1553 | { | |
1554 | switch (info->fix.accel) { | |
1555 | case FB_ACCEL_NEOMAGIC_NM2200: | |
1556 | case FB_ACCEL_NEOMAGIC_NM2230: | |
1557 | case FB_ACCEL_NEOMAGIC_NM2360: | |
1558 | case FB_ACCEL_NEOMAGIC_NM2380: | |
1559 | neo2200_copyarea(info, area); | |
1560 | break; | |
1561 | default: | |
1562 | cfb_copyarea(info, area); | |
1563 | break; | |
1564 | } | |
1565 | } | |
1566 | ||
1567 | static void | |
1568 | neofb_imageblit(struct fb_info *info, const struct fb_image *image) | |
1569 | { | |
1570 | switch (info->fix.accel) { | |
1571 | case FB_ACCEL_NEOMAGIC_NM2200: | |
1572 | case FB_ACCEL_NEOMAGIC_NM2230: | |
1573 | case FB_ACCEL_NEOMAGIC_NM2360: | |
1574 | case FB_ACCEL_NEOMAGIC_NM2380: | |
1575 | neo2200_imageblit(info, image); | |
1576 | break; | |
1577 | default: | |
1578 | cfb_imageblit(info, image); | |
1579 | break; | |
1580 | } | |
1581 | } | |
1582 | ||
1583 | static int | |
1584 | neofb_sync(struct fb_info *info) | |
1585 | { | |
1586 | switch (info->fix.accel) { | |
1587 | case FB_ACCEL_NEOMAGIC_NM2200: | |
1588 | case FB_ACCEL_NEOMAGIC_NM2230: | |
1589 | case FB_ACCEL_NEOMAGIC_NM2360: | |
1590 | case FB_ACCEL_NEOMAGIC_NM2380: | |
1591 | neo2200_sync(info); | |
1592 | break; | |
1593 | default: | |
1594 | break; | |
1595 | } | |
1596 | return 0; | |
1597 | } | |
1598 | ||
1599 | /* | |
1600 | static void | |
1601 | neofb_draw_cursor(struct fb_info *info, u8 *dst, u8 *src, unsigned int width) | |
1602 | { | |
1603 | //memset_io(info->sprite.addr, 0xff, 1); | |
1604 | } | |
1605 | ||
1606 | static int | |
1607 | neofb_cursor(struct fb_info *info, struct fb_cursor *cursor) | |
1608 | { | |
1609 | struct neofb_par *par = (struct neofb_par *) info->par; | |
1610 | ||
1611 | * Disable cursor * | |
1612 | write_le32(NEOREG_CURSCNTL, ~NEO_CURS_ENABLE, par); | |
1613 | ||
1614 | if (cursor->set & FB_CUR_SETPOS) { | |
1615 | u32 x = cursor->image.dx; | |
1616 | u32 y = cursor->image.dy; | |
1617 | ||
1618 | info->cursor.image.dx = x; | |
1619 | info->cursor.image.dy = y; | |
1620 | write_le32(NEOREG_CURSX, x, par); | |
1621 | write_le32(NEOREG_CURSY, y, par); | |
1622 | } | |
1623 | ||
1624 | if (cursor->set & FB_CUR_SETSIZE) { | |
1625 | info->cursor.image.height = cursor->image.height; | |
1626 | info->cursor.image.width = cursor->image.width; | |
1627 | } | |
1628 | ||
1629 | if (cursor->set & FB_CUR_SETHOT) | |
1630 | info->cursor.hot = cursor->hot; | |
1631 | ||
1632 | if (cursor->set & FB_CUR_SETCMAP) { | |
1633 | if (cursor->image.depth == 1) { | |
1634 | u32 fg = cursor->image.fg_color; | |
1635 | u32 bg = cursor->image.bg_color; | |
1636 | ||
1637 | info->cursor.image.fg_color = fg; | |
1638 | info->cursor.image.bg_color = bg; | |
1639 | ||
1640 | fg = ((fg & 0xff0000) >> 16) | ((fg & 0xff) << 16) | (fg & 0xff00); | |
1641 | bg = ((bg & 0xff0000) >> 16) | ((bg & 0xff) << 16) | (bg & 0xff00); | |
1642 | write_le32(NEOREG_CURSFGCOLOR, fg, par); | |
1643 | write_le32(NEOREG_CURSBGCOLOR, bg, par); | |
1644 | } | |
1645 | } | |
1646 | ||
1647 | if (cursor->set & FB_CUR_SETSHAPE) | |
1648 | fb_load_cursor_image(info); | |
1649 | ||
1650 | if (info->cursor.enable) | |
1651 | write_le32(NEOREG_CURSCNTL, NEO_CURS_ENABLE, par); | |
1652 | return 0; | |
1653 | } | |
1654 | */ | |
1655 | ||
1656 | static struct fb_ops neofb_ops = { | |
1657 | .owner = THIS_MODULE, | |
1658 | .fb_open = neofb_open, | |
1659 | .fb_release = neofb_release, | |
1660 | .fb_check_var = neofb_check_var, | |
1661 | .fb_set_par = neofb_set_par, | |
1662 | .fb_setcolreg = neofb_setcolreg, | |
1663 | .fb_pan_display = neofb_pan_display, | |
1664 | .fb_blank = neofb_blank, | |
1665 | .fb_sync = neofb_sync, | |
1666 | .fb_fillrect = neofb_fillrect, | |
1667 | .fb_copyarea = neofb_copyarea, | |
1668 | .fb_imageblit = neofb_imageblit, | |
1da177e4 LT |
1669 | }; |
1670 | ||
1671 | /* --------------------------------------------------------------------- */ | |
1672 | ||
1673 | static struct fb_videomode __devinitdata mode800x480 = { | |
1674 | .xres = 800, | |
1675 | .yres = 480, | |
1676 | .pixclock = 25000, | |
1677 | .left_margin = 88, | |
1678 | .right_margin = 40, | |
1679 | .upper_margin = 23, | |
1680 | .lower_margin = 1, | |
1681 | .hsync_len = 128, | |
1682 | .vsync_len = 4, | |
1683 | .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, | |
1684 | .vmode = FB_VMODE_NONINTERLACED | |
1685 | }; | |
1686 | ||
1687 | static int __devinit neo_map_mmio(struct fb_info *info, | |
1688 | struct pci_dev *dev) | |
1689 | { | |
9f19bc56 | 1690 | struct neofb_par *par = info->par; |
1da177e4 LT |
1691 | |
1692 | DBG("neo_map_mmio"); | |
1693 | ||
1694 | switch (info->fix.accel) { | |
1695 | case FB_ACCEL_NEOMAGIC_NM2070: | |
1696 | info->fix.mmio_start = pci_resource_start(dev, 0)+ | |
1697 | 0x100000; | |
1698 | break; | |
1699 | case FB_ACCEL_NEOMAGIC_NM2090: | |
1700 | case FB_ACCEL_NEOMAGIC_NM2093: | |
1701 | info->fix.mmio_start = pci_resource_start(dev, 0)+ | |
1702 | 0x200000; | |
1703 | break; | |
1704 | case FB_ACCEL_NEOMAGIC_NM2160: | |
1705 | case FB_ACCEL_NEOMAGIC_NM2097: | |
1706 | case FB_ACCEL_NEOMAGIC_NM2200: | |
1707 | case FB_ACCEL_NEOMAGIC_NM2230: | |
1708 | case FB_ACCEL_NEOMAGIC_NM2360: | |
1709 | case FB_ACCEL_NEOMAGIC_NM2380: | |
1710 | info->fix.mmio_start = pci_resource_start(dev, 1); | |
1711 | break; | |
1712 | default: | |
1713 | info->fix.mmio_start = pci_resource_start(dev, 0); | |
1714 | } | |
1715 | info->fix.mmio_len = MMIO_SIZE; | |
1716 | ||
1717 | if (!request_mem_region | |
1718 | (info->fix.mmio_start, MMIO_SIZE, "memory mapped I/O")) { | |
1719 | printk("neofb: memory mapped IO in use\n"); | |
1720 | return -EBUSY; | |
1721 | } | |
1722 | ||
1723 | par->mmio_vbase = ioremap(info->fix.mmio_start, MMIO_SIZE); | |
1724 | if (!par->mmio_vbase) { | |
1725 | printk("neofb: unable to map memory mapped IO\n"); | |
1726 | release_mem_region(info->fix.mmio_start, | |
1727 | info->fix.mmio_len); | |
1728 | return -ENOMEM; | |
1729 | } else | |
1730 | printk(KERN_INFO "neofb: mapped io at %p\n", | |
1731 | par->mmio_vbase); | |
1732 | return 0; | |
1733 | } | |
1734 | ||
1735 | static void neo_unmap_mmio(struct fb_info *info) | |
1736 | { | |
9f19bc56 | 1737 | struct neofb_par *par = info->par; |
1da177e4 LT |
1738 | |
1739 | DBG("neo_unmap_mmio"); | |
1740 | ||
1741 | iounmap(par->mmio_vbase); | |
1742 | par->mmio_vbase = NULL; | |
1743 | ||
1744 | release_mem_region(info->fix.mmio_start, | |
1745 | info->fix.mmio_len); | |
1746 | } | |
1747 | ||
1748 | static int __devinit neo_map_video(struct fb_info *info, | |
1749 | struct pci_dev *dev, int video_len) | |
1750 | { | |
1751 | //unsigned long addr; | |
1752 | ||
1753 | DBG("neo_map_video"); | |
1754 | ||
1755 | info->fix.smem_start = pci_resource_start(dev, 0); | |
1756 | info->fix.smem_len = video_len; | |
1757 | ||
1758 | if (!request_mem_region(info->fix.smem_start, info->fix.smem_len, | |
1759 | "frame buffer")) { | |
1760 | printk("neofb: frame buffer in use\n"); | |
1761 | return -EBUSY; | |
1762 | } | |
1763 | ||
1764 | info->screen_base = | |
1765 | ioremap(info->fix.smem_start, info->fix.smem_len); | |
1766 | if (!info->screen_base) { | |
1767 | printk("neofb: unable to map screen memory\n"); | |
1768 | release_mem_region(info->fix.smem_start, | |
1769 | info->fix.smem_len); | |
1770 | return -ENOMEM; | |
1771 | } else | |
1772 | printk(KERN_INFO "neofb: mapped framebuffer at %p\n", | |
1773 | info->screen_base); | |
1774 | ||
1775 | #ifdef CONFIG_MTRR | |
1776 | ((struct neofb_par *)(info->par))->mtrr = | |
1777 | mtrr_add(info->fix.smem_start, pci_resource_len(dev, 0), | |
1778 | MTRR_TYPE_WRCOMB, 1); | |
1779 | #endif | |
1780 | ||
1781 | /* Clear framebuffer, it's all white in memory after boot */ | |
1782 | memset_io(info->screen_base, 0, info->fix.smem_len); | |
1783 | ||
1784 | /* Allocate Cursor drawing pad. | |
1785 | info->fix.smem_len -= PAGE_SIZE; | |
1786 | addr = info->fix.smem_start + info->fix.smem_len; | |
1787 | write_le32(NEOREG_CURSMEMPOS, ((0x000f & (addr >> 10)) << 8) | | |
1788 | ((0x0ff0 & (addr >> 10)) >> 4), par); | |
1789 | addr = (unsigned long) info->screen_base + info->fix.smem_len; | |
1790 | info->sprite.addr = (u8 *) addr; */ | |
1791 | return 0; | |
1792 | } | |
1793 | ||
1794 | static void neo_unmap_video(struct fb_info *info) | |
1795 | { | |
1796 | DBG("neo_unmap_video"); | |
1797 | ||
1798 | #ifdef CONFIG_MTRR | |
1799 | { | |
9f19bc56 | 1800 | struct neofb_par *par = info->par; |
1da177e4 LT |
1801 | |
1802 | mtrr_del(par->mtrr, info->fix.smem_start, | |
1803 | info->fix.smem_len); | |
1804 | } | |
1805 | #endif | |
1806 | iounmap(info->screen_base); | |
1807 | info->screen_base = NULL; | |
1808 | ||
1809 | release_mem_region(info->fix.smem_start, | |
1810 | info->fix.smem_len); | |
1811 | } | |
1812 | ||
1813 | static int __devinit neo_scan_monitor(struct fb_info *info) | |
1814 | { | |
9f19bc56 | 1815 | struct neofb_par *par = info->par; |
1da177e4 LT |
1816 | unsigned char type, display; |
1817 | int w; | |
1818 | ||
1819 | // Eventually we will have i2c support. | |
1820 | info->monspecs.modedb = kmalloc(sizeof(struct fb_videomode), GFP_KERNEL); | |
1821 | if (!info->monspecs.modedb) | |
1822 | return -ENOMEM; | |
1823 | info->monspecs.modedb_len = 1; | |
1824 | ||
1825 | /* Determine the panel type */ | |
1826 | vga_wgfx(NULL, 0x09, 0x26); | |
1827 | type = vga_rgfx(NULL, 0x21); | |
1828 | display = vga_rgfx(NULL, 0x20); | |
1829 | if (!par->internal_display && !par->external_display) { | |
1830 | par->internal_display = display & 2 || !(display & 3) ? 1 : 0; | |
1831 | par->external_display = display & 1; | |
1832 | printk (KERN_INFO "Autodetected %s display\n", | |
1833 | par->internal_display && par->external_display ? "simultaneous" : | |
1834 | par->internal_display ? "internal" : "external"); | |
1835 | } | |
1836 | ||
1837 | /* Determine panel width -- used in NeoValidMode. */ | |
1838 | w = vga_rgfx(NULL, 0x20); | |
1839 | vga_wgfx(NULL, 0x09, 0x00); | |
1840 | switch ((w & 0x18) >> 3) { | |
1841 | case 0x00: | |
1842 | // 640x480@60 | |
1843 | par->NeoPanelWidth = 640; | |
1844 | par->NeoPanelHeight = 480; | |
1845 | memcpy(info->monspecs.modedb, &vesa_modes[3], sizeof(struct fb_videomode)); | |
1846 | break; | |
1847 | case 0x01: | |
1848 | par->NeoPanelWidth = 800; | |
1849 | if (par->libretto) { | |
1850 | par->NeoPanelHeight = 480; | |
1851 | memcpy(info->monspecs.modedb, &mode800x480, sizeof(struct fb_videomode)); | |
1852 | } else { | |
1853 | // 800x600@60 | |
1854 | par->NeoPanelHeight = 600; | |
1855 | memcpy(info->monspecs.modedb, &vesa_modes[8], sizeof(struct fb_videomode)); | |
1856 | } | |
1857 | break; | |
1858 | case 0x02: | |
1859 | // 1024x768@60 | |
1860 | par->NeoPanelWidth = 1024; | |
1861 | par->NeoPanelHeight = 768; | |
1862 | memcpy(info->monspecs.modedb, &vesa_modes[13], sizeof(struct fb_videomode)); | |
1863 | break; | |
1864 | case 0x03: | |
1865 | /* 1280x1024@60 panel support needs to be added */ | |
1866 | #ifdef NOT_DONE | |
1867 | par->NeoPanelWidth = 1280; | |
1868 | par->NeoPanelHeight = 1024; | |
1869 | memcpy(info->monspecs.modedb, &vesa_modes[20], sizeof(struct fb_videomode)); | |
1870 | break; | |
1871 | #else | |
1872 | printk(KERN_ERR | |
1873 | "neofb: Only 640x480, 800x600/480 and 1024x768 panels are currently supported\n"); | |
1874 | return -1; | |
1875 | #endif | |
1876 | default: | |
1877 | // 640x480@60 | |
1878 | par->NeoPanelWidth = 640; | |
1879 | par->NeoPanelHeight = 480; | |
1880 | memcpy(info->monspecs.modedb, &vesa_modes[3], sizeof(struct fb_videomode)); | |
1881 | break; | |
1882 | } | |
1883 | ||
1884 | printk(KERN_INFO "Panel is a %dx%d %s %s display\n", | |
1885 | par->NeoPanelWidth, | |
1886 | par->NeoPanelHeight, | |
1887 | (type & 0x02) ? "color" : "monochrome", | |
1888 | (type & 0x10) ? "TFT" : "dual scan"); | |
1889 | return 0; | |
1890 | } | |
1891 | ||
1892 | static int __devinit neo_init_hw(struct fb_info *info) | |
1893 | { | |
9f19bc56 | 1894 | struct neofb_par *par = info->par; |
1da177e4 LT |
1895 | int videoRam = 896; |
1896 | int maxClock = 65000; | |
1897 | int CursorMem = 1024; | |
1898 | int CursorOff = 0x100; | |
1da177e4 LT |
1899 | |
1900 | DBG("neo_init_hw"); | |
1901 | ||
1902 | neoUnlock(); | |
1903 | ||
1904 | #if 0 | |
1905 | printk(KERN_DEBUG "--- Neo extended register dump ---\n"); | |
1906 | for (int w = 0; w < 0x85; w++) | |
1907 | printk(KERN_DEBUG "CR %p: %p\n", (void *) w, | |
4971bb70 | 1908 | (void *) vga_rcrt(NULL, w)); |
1da177e4 LT |
1909 | for (int w = 0; w < 0xC7; w++) |
1910 | printk(KERN_DEBUG "GR %p: %p\n", (void *) w, | |
1911 | (void *) vga_rgfx(NULL, w)); | |
1912 | #endif | |
1913 | switch (info->fix.accel) { | |
1914 | case FB_ACCEL_NEOMAGIC_NM2070: | |
1915 | videoRam = 896; | |
1916 | maxClock = 65000; | |
1da177e4 LT |
1917 | break; |
1918 | case FB_ACCEL_NEOMAGIC_NM2090: | |
1919 | case FB_ACCEL_NEOMAGIC_NM2093: | |
1da177e4 LT |
1920 | case FB_ACCEL_NEOMAGIC_NM2097: |
1921 | videoRam = 1152; | |
1922 | maxClock = 80000; | |
1da177e4 LT |
1923 | break; |
1924 | case FB_ACCEL_NEOMAGIC_NM2160: | |
1925 | videoRam = 2048; | |
1926 | maxClock = 90000; | |
1da177e4 LT |
1927 | break; |
1928 | case FB_ACCEL_NEOMAGIC_NM2200: | |
1929 | videoRam = 2560; | |
1930 | maxClock = 110000; | |
1da177e4 LT |
1931 | break; |
1932 | case FB_ACCEL_NEOMAGIC_NM2230: | |
1933 | videoRam = 3008; | |
1934 | maxClock = 110000; | |
1da177e4 LT |
1935 | break; |
1936 | case FB_ACCEL_NEOMAGIC_NM2360: | |
1937 | videoRam = 4096; | |
1938 | maxClock = 110000; | |
1da177e4 LT |
1939 | break; |
1940 | case FB_ACCEL_NEOMAGIC_NM2380: | |
1941 | videoRam = 6144; | |
1942 | maxClock = 110000; | |
1ca6b62f KH |
1943 | break; |
1944 | } | |
1945 | switch (info->fix.accel) { | |
1946 | case FB_ACCEL_NEOMAGIC_NM2070: | |
1947 | case FB_ACCEL_NEOMAGIC_NM2090: | |
1948 | case FB_ACCEL_NEOMAGIC_NM2093: | |
1949 | CursorMem = 2048; | |
1950 | CursorOff = 0x100; | |
1951 | break; | |
1952 | case FB_ACCEL_NEOMAGIC_NM2097: | |
1953 | case FB_ACCEL_NEOMAGIC_NM2160: | |
1954 | CursorMem = 1024; | |
1955 | CursorOff = 0x100; | |
1956 | break; | |
1957 | case FB_ACCEL_NEOMAGIC_NM2200: | |
1958 | case FB_ACCEL_NEOMAGIC_NM2230: | |
1959 | case FB_ACCEL_NEOMAGIC_NM2360: | |
1960 | case FB_ACCEL_NEOMAGIC_NM2380: | |
1da177e4 LT |
1961 | CursorMem = 1024; |
1962 | CursorOff = 0x1000; | |
1da177e4 LT |
1963 | |
1964 | par->neo2200 = (Neo2200 __iomem *) par->mmio_vbase; | |
1965 | break; | |
1966 | } | |
1967 | /* | |
1968 | info->sprite.size = CursorMem; | |
1969 | info->sprite.scan_align = 1; | |
1970 | info->sprite.buf_align = 1; | |
1971 | info->sprite.flags = FB_PIXMAP_IO; | |
1972 | info->sprite.outbuf = neofb_draw_cursor; | |
1973 | */ | |
1974 | par->maxClock = maxClock; | |
1975 | par->cursorOff = CursorOff; | |
1ca6b62f | 1976 | return videoRam * 1024; |
1da177e4 LT |
1977 | } |
1978 | ||
1979 | ||
1980 | static struct fb_info *__devinit neo_alloc_fb_info(struct pci_dev *dev, const struct | |
1981 | pci_device_id *id) | |
1982 | { | |
1983 | struct fb_info *info; | |
1984 | struct neofb_par *par; | |
1985 | ||
9f19bc56 | 1986 | info = framebuffer_alloc(sizeof(struct neofb_par), &dev->dev); |
1da177e4 LT |
1987 | |
1988 | if (!info) | |
1989 | return NULL; | |
1990 | ||
1991 | par = info->par; | |
1992 | ||
1993 | info->fix.accel = id->driver_data; | |
1994 | ||
c4f28e54 | 1995 | mutex_init(&par->open_lock); |
1da177e4 LT |
1996 | par->pci_burst = !nopciburst; |
1997 | par->lcd_stretch = !nostretch; | |
1998 | par->libretto = libretto; | |
1999 | ||
2000 | par->internal_display = internal; | |
2001 | par->external_display = external; | |
2002 | info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN; | |
2003 | ||
2004 | switch (info->fix.accel) { | |
2005 | case FB_ACCEL_NEOMAGIC_NM2070: | |
0e904549 AM |
2006 | snprintf(info->fix.id, sizeof(info->fix.id), |
2007 | "MagicGraph 128"); | |
1da177e4 LT |
2008 | break; |
2009 | case FB_ACCEL_NEOMAGIC_NM2090: | |
0e904549 AM |
2010 | snprintf(info->fix.id, sizeof(info->fix.id), |
2011 | "MagicGraph 128V"); | |
1da177e4 LT |
2012 | break; |
2013 | case FB_ACCEL_NEOMAGIC_NM2093: | |
0e904549 AM |
2014 | snprintf(info->fix.id, sizeof(info->fix.id), |
2015 | "MagicGraph 128ZV"); | |
1da177e4 LT |
2016 | break; |
2017 | case FB_ACCEL_NEOMAGIC_NM2097: | |
0e904549 AM |
2018 | snprintf(info->fix.id, sizeof(info->fix.id), |
2019 | "MagicGraph 128ZV+"); | |
1da177e4 LT |
2020 | break; |
2021 | case FB_ACCEL_NEOMAGIC_NM2160: | |
0e904549 AM |
2022 | snprintf(info->fix.id, sizeof(info->fix.id), |
2023 | "MagicGraph 128XD"); | |
1da177e4 LT |
2024 | break; |
2025 | case FB_ACCEL_NEOMAGIC_NM2200: | |
0e904549 AM |
2026 | snprintf(info->fix.id, sizeof(info->fix.id), |
2027 | "MagicGraph 256AV"); | |
1da177e4 LT |
2028 | info->flags |= FBINFO_HWACCEL_IMAGEBLIT | |
2029 | FBINFO_HWACCEL_COPYAREA | | |
2030 | FBINFO_HWACCEL_FILLRECT; | |
2031 | break; | |
2032 | case FB_ACCEL_NEOMAGIC_NM2230: | |
0e904549 AM |
2033 | snprintf(info->fix.id, sizeof(info->fix.id), |
2034 | "MagicGraph 256AV+"); | |
1da177e4 LT |
2035 | info->flags |= FBINFO_HWACCEL_IMAGEBLIT | |
2036 | FBINFO_HWACCEL_COPYAREA | | |
2037 | FBINFO_HWACCEL_FILLRECT; | |
2038 | break; | |
2039 | case FB_ACCEL_NEOMAGIC_NM2360: | |
0e904549 AM |
2040 | snprintf(info->fix.id, sizeof(info->fix.id), |
2041 | "MagicGraph 256ZX"); | |
1da177e4 LT |
2042 | info->flags |= FBINFO_HWACCEL_IMAGEBLIT | |
2043 | FBINFO_HWACCEL_COPYAREA | | |
2044 | FBINFO_HWACCEL_FILLRECT; | |
2045 | break; | |
2046 | case FB_ACCEL_NEOMAGIC_NM2380: | |
0e904549 AM |
2047 | snprintf(info->fix.id, sizeof(info->fix.id), |
2048 | "MagicGraph 256XL+"); | |
1da177e4 LT |
2049 | info->flags |= FBINFO_HWACCEL_IMAGEBLIT | |
2050 | FBINFO_HWACCEL_COPYAREA | | |
2051 | FBINFO_HWACCEL_FILLRECT; | |
2052 | break; | |
2053 | } | |
2054 | ||
2055 | info->fix.type = FB_TYPE_PACKED_PIXELS; | |
2056 | info->fix.type_aux = 0; | |
2057 | info->fix.xpanstep = 0; | |
2058 | info->fix.ypanstep = 4; | |
2059 | info->fix.ywrapstep = 0; | |
2060 | info->fix.accel = id->driver_data; | |
2061 | ||
2062 | info->fbops = &neofb_ops; | |
9f19bc56 | 2063 | info->pseudo_palette = par->palette; |
1da177e4 LT |
2064 | return info; |
2065 | } | |
2066 | ||
2067 | static void neo_free_fb_info(struct fb_info *info) | |
2068 | { | |
2069 | if (info) { | |
2070 | /* | |
2071 | * Free the colourmap | |
2072 | */ | |
2073 | fb_dealloc_cmap(&info->cmap); | |
2074 | framebuffer_release(info); | |
2075 | } | |
2076 | } | |
2077 | ||
2078 | /* --------------------------------------------------------------------- */ | |
2079 | ||
2080 | static int __devinit neofb_probe(struct pci_dev *dev, | |
2081 | const struct pci_device_id *id) | |
2082 | { | |
2083 | struct fb_info *info; | |
2084 | u_int h_sync, v_sync; | |
2085 | int video_len, err; | |
2086 | ||
2087 | DBG("neofb_probe"); | |
2088 | ||
2089 | err = pci_enable_device(dev); | |
2090 | if (err) | |
2091 | return err; | |
2092 | ||
2093 | err = -ENOMEM; | |
2094 | info = neo_alloc_fb_info(dev, id); | |
2095 | if (!info) | |
2096 | return err; | |
2097 | ||
2098 | err = neo_map_mmio(info, dev); | |
2099 | if (err) | |
2100 | goto err_map_mmio; | |
2101 | ||
2102 | err = neo_scan_monitor(info); | |
2103 | if (err) | |
2104 | goto err_scan_monitor; | |
2105 | ||
2106 | video_len = neo_init_hw(info); | |
2107 | if (video_len < 0) { | |
2108 | err = video_len; | |
2109 | goto err_init_hw; | |
2110 | } | |
2111 | ||
2112 | err = neo_map_video(info, dev, video_len); | |
2113 | if (err) | |
2114 | goto err_init_hw; | |
2115 | ||
2116 | if (!fb_find_mode(&info->var, info, mode_option, NULL, 0, | |
2117 | info->monspecs.modedb, 16)) { | |
2118 | printk(KERN_ERR "neofb: Unable to find usable video mode.\n"); | |
2119 | goto err_map_video; | |
2120 | } | |
2121 | ||
2122 | /* | |
2123 | * Calculate the hsync and vsync frequencies. Note that | |
2124 | * we split the 1e12 constant up so that we can preserve | |
2125 | * the precision and fit the results into 32-bit registers. | |
2126 | * (1953125000 * 512 = 1e12) | |
2127 | */ | |
2128 | h_sync = 1953125000 / info->var.pixclock; | |
2129 | h_sync = | |
2130 | h_sync * 512 / (info->var.xres + info->var.left_margin + | |
2131 | info->var.right_margin + info->var.hsync_len); | |
2132 | v_sync = | |
2133 | h_sync / (info->var.yres + info->var.upper_margin + | |
2134 | info->var.lower_margin + info->var.vsync_len); | |
2135 | ||
2136 | printk(KERN_INFO "neofb v" NEOFB_VERSION | |
2137 | ": %dkB VRAM, using %dx%d, %d.%03dkHz, %dHz\n", | |
2138 | info->fix.smem_len >> 10, info->var.xres, | |
2139 | info->var.yres, h_sync / 1000, h_sync % 1000, v_sync); | |
2140 | ||
2141 | if (fb_alloc_cmap(&info->cmap, 256, 0) < 0) | |
2142 | goto err_map_video; | |
2143 | ||
2144 | err = register_framebuffer(info); | |
2145 | if (err < 0) | |
2146 | goto err_reg_fb; | |
2147 | ||
2148 | printk(KERN_INFO "fb%d: %s frame buffer device\n", | |
2149 | info->node, info->fix.id); | |
2150 | ||
2151 | /* | |
2152 | * Our driver data | |
2153 | */ | |
2154 | pci_set_drvdata(dev, info); | |
2155 | return 0; | |
2156 | ||
2157 | err_reg_fb: | |
2158 | fb_dealloc_cmap(&info->cmap); | |
2159 | err_map_video: | |
2160 | neo_unmap_video(info); | |
2161 | err_init_hw: | |
2162 | fb_destroy_modedb(info->monspecs.modedb); | |
2163 | err_scan_monitor: | |
2164 | neo_unmap_mmio(info); | |
2165 | err_map_mmio: | |
2166 | neo_free_fb_info(info); | |
2167 | return err; | |
2168 | } | |
2169 | ||
2170 | static void __devexit neofb_remove(struct pci_dev *dev) | |
2171 | { | |
2172 | struct fb_info *info = pci_get_drvdata(dev); | |
2173 | ||
2174 | DBG("neofb_remove"); | |
2175 | ||
2176 | if (info) { | |
2177 | /* | |
2178 | * If unregister_framebuffer fails, then | |
2179 | * we will be leaving hooks that could cause | |
2180 | * oopsen laying around. | |
2181 | */ | |
2182 | if (unregister_framebuffer(info)) | |
2183 | printk(KERN_WARNING | |
2184 | "neofb: danger danger! Oopsen imminent!\n"); | |
2185 | ||
2186 | neo_unmap_video(info); | |
2187 | fb_destroy_modedb(info->monspecs.modedb); | |
2188 | neo_unmap_mmio(info); | |
2189 | neo_free_fb_info(info); | |
2190 | ||
2191 | /* | |
2192 | * Ensure that the driver data is no longer | |
2193 | * valid. | |
2194 | */ | |
2195 | pci_set_drvdata(dev, NULL); | |
2196 | } | |
2197 | } | |
2198 | ||
2199 | static struct pci_device_id neofb_devices[] = { | |
2200 | {PCI_VENDOR_ID_NEOMAGIC, PCI_CHIP_NM2070, | |
2201 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_NEOMAGIC_NM2070}, | |
2202 | ||
2203 | {PCI_VENDOR_ID_NEOMAGIC, PCI_CHIP_NM2090, | |
2204 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_NEOMAGIC_NM2090}, | |
2205 | ||
2206 | {PCI_VENDOR_ID_NEOMAGIC, PCI_CHIP_NM2093, | |
2207 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_NEOMAGIC_NM2093}, | |
2208 | ||
2209 | {PCI_VENDOR_ID_NEOMAGIC, PCI_CHIP_NM2097, | |
2210 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_NEOMAGIC_NM2097}, | |
2211 | ||
2212 | {PCI_VENDOR_ID_NEOMAGIC, PCI_CHIP_NM2160, | |
2213 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_NEOMAGIC_NM2160}, | |
2214 | ||
2215 | {PCI_VENDOR_ID_NEOMAGIC, PCI_CHIP_NM2200, | |
2216 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_NEOMAGIC_NM2200}, | |
2217 | ||
2218 | {PCI_VENDOR_ID_NEOMAGIC, PCI_CHIP_NM2230, | |
2219 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_NEOMAGIC_NM2230}, | |
2220 | ||
2221 | {PCI_VENDOR_ID_NEOMAGIC, PCI_CHIP_NM2360, | |
2222 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_NEOMAGIC_NM2360}, | |
2223 | ||
2224 | {PCI_VENDOR_ID_NEOMAGIC, PCI_CHIP_NM2380, | |
2225 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_NEOMAGIC_NM2380}, | |
2226 | ||
2227 | {0, 0, 0, 0, 0, 0, 0} | |
2228 | }; | |
2229 | ||
2230 | MODULE_DEVICE_TABLE(pci, neofb_devices); | |
2231 | ||
2232 | static struct pci_driver neofb_driver = { | |
2233 | .name = "neofb", | |
2234 | .id_table = neofb_devices, | |
2235 | .probe = neofb_probe, | |
2236 | .remove = __devexit_p(neofb_remove) | |
2237 | }; | |
2238 | ||
2239 | /* ************************* init in-kernel code ************************** */ | |
2240 | ||
2241 | #ifndef MODULE | |
2242 | static int __init neofb_setup(char *options) | |
2243 | { | |
2244 | char *this_opt; | |
2245 | ||
2246 | DBG("neofb_setup"); | |
2247 | ||
2248 | if (!options || !*options) | |
2249 | return 0; | |
2250 | ||
2251 | while ((this_opt = strsep(&options, ",")) != NULL) { | |
2252 | if (!*this_opt) | |
2253 | continue; | |
2254 | ||
2255 | if (!strncmp(this_opt, "internal", 8)) | |
2256 | internal = 1; | |
2257 | else if (!strncmp(this_opt, "external", 8)) | |
2258 | external = 1; | |
2259 | else if (!strncmp(this_opt, "nostretch", 9)) | |
2260 | nostretch = 1; | |
2261 | else if (!strncmp(this_opt, "nopciburst", 10)) | |
2262 | nopciburst = 1; | |
2263 | else if (!strncmp(this_opt, "libretto", 8)) | |
2264 | libretto = 1; | |
2265 | else | |
2266 | mode_option = this_opt; | |
2267 | } | |
2268 | return 0; | |
2269 | } | |
2270 | #endif /* MODULE */ | |
2271 | ||
2272 | static int __init neofb_init(void) | |
2273 | { | |
2274 | #ifndef MODULE | |
2275 | char *option = NULL; | |
2276 | ||
2277 | if (fb_get_options("neofb", &option)) | |
2278 | return -ENODEV; | |
2279 | neofb_setup(option); | |
2280 | #endif | |
2281 | return pci_register_driver(&neofb_driver); | |
2282 | } | |
2283 | ||
2284 | module_init(neofb_init); | |
2285 | ||
2286 | #ifdef MODULE | |
2287 | static void __exit neofb_exit(void) | |
2288 | { | |
2289 | pci_unregister_driver(&neofb_driver); | |
2290 | } | |
2291 | ||
2292 | module_exit(neofb_exit); | |
2293 | #endif /* MODULE */ |