]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* drivers/video/pvr2fb.c |
2 | * | |
3 | * Frame buffer and fbcon support for the NEC PowerVR2 found within the Sega | |
4 | * Dreamcast. | |
5 | * | |
6 | * Copyright (c) 2001 M. R. Brown <mrbrown@0xd6.org> | |
7 | * Copyright (c) 2001, 2002, 2003, 2004, 2005 Paul Mundt <lethal@linux-sh.org> | |
8 | * | |
9 | * This file is part of the LinuxDC project (linuxdc.sourceforge.net). | |
10 | * | |
11 | */ | |
12 | ||
13 | /* | |
14 | * This driver is mostly based on the excellent amifb and vfb sources. It uses | |
15 | * an odd scheme for converting hardware values to/from framebuffer values, | |
16 | * here are some hacked-up formulas: | |
17 | * | |
18 | * The Dreamcast has screen offsets from each side of its four borders and | |
19 | * the start offsets of the display window. I used these values to calculate | |
20 | * 'pseudo' values (think of them as placeholders) for the fb video mode, so | |
21 | * that when it came time to convert these values back into their hardware | |
22 | * values, I could just add mode- specific offsets to get the correct mode | |
23 | * settings: | |
24 | * | |
25 | * left_margin = diwstart_h - borderstart_h; | |
26 | * right_margin = borderstop_h - (diwstart_h + xres); | |
27 | * upper_margin = diwstart_v - borderstart_v; | |
28 | * lower_margin = borderstop_v - (diwstart_h + yres); | |
29 | * | |
30 | * hsync_len = borderstart_h + (hsync_total - borderstop_h); | |
31 | * vsync_len = borderstart_v + (vsync_total - borderstop_v); | |
32 | * | |
33 | * Then, when it's time to convert back to hardware settings, the only | |
34 | * constants are the borderstart_* offsets, all other values are derived from | |
35 | * the fb video mode: | |
36 | * | |
37 | * // PAL | |
38 | * borderstart_h = 116; | |
39 | * borderstart_v = 44; | |
40 | * ... | |
41 | * borderstop_h = borderstart_h + hsync_total - hsync_len; | |
42 | * ... | |
43 | * diwstart_v = borderstart_v - upper_margin; | |
44 | * | |
45 | * However, in the current implementation, the borderstart values haven't had | |
46 | * the benefit of being fully researched, so some modes may be broken. | |
47 | */ | |
48 | ||
49 | #undef DEBUG | |
50 | ||
51 | #include <linux/module.h> | |
52 | #include <linux/kernel.h> | |
53 | #include <linux/errno.h> | |
54 | #include <linux/string.h> | |
55 | #include <linux/mm.h> | |
1da177e4 LT |
56 | #include <linux/slab.h> |
57 | #include <linux/delay.h> | |
1da177e4 LT |
58 | #include <linux/interrupt.h> |
59 | #include <linux/fb.h> | |
60 | #include <linux/init.h> | |
61 | #include <linux/pci.h> | |
62 | ||
63 | #ifdef CONFIG_SH_DREAMCAST | |
64 | #include <asm/machvec.h> | |
65 | #include <asm/mach/sysasic.h> | |
66 | #endif | |
67 | ||
68 | #ifdef CONFIG_SH_DMA | |
69 | #include <linux/pagemap.h> | |
70 | #include <asm/mach/dma.h> | |
71 | #include <asm/dma.h> | |
72 | #endif | |
73 | ||
74 | #ifdef CONFIG_SH_STORE_QUEUES | |
75 | #include <asm/uaccess.h> | |
76 | #include <asm/cpu/sq.h> | |
77 | #endif | |
78 | ||
79 | #ifndef PCI_DEVICE_ID_NEC_NEON250 | |
80 | # define PCI_DEVICE_ID_NEC_NEON250 0x0067 | |
81 | #endif | |
82 | ||
83 | /* 2D video registers */ | |
84 | #define DISP_BASE par->mmio_base | |
85 | #define DISP_BRDRCOLR (DISP_BASE + 0x40) | |
86 | #define DISP_DIWMODE (DISP_BASE + 0x44) | |
87 | #define DISP_DIWADDRL (DISP_BASE + 0x50) | |
88 | #define DISP_DIWADDRS (DISP_BASE + 0x54) | |
89 | #define DISP_DIWSIZE (DISP_BASE + 0x5c) | |
90 | #define DISP_SYNCCONF (DISP_BASE + 0xd0) | |
91 | #define DISP_BRDRHORZ (DISP_BASE + 0xd4) | |
92 | #define DISP_SYNCSIZE (DISP_BASE + 0xd8) | |
93 | #define DISP_BRDRVERT (DISP_BASE + 0xdc) | |
94 | #define DISP_DIWCONF (DISP_BASE + 0xe8) | |
95 | #define DISP_DIWHSTRT (DISP_BASE + 0xec) | |
96 | #define DISP_DIWVSTRT (DISP_BASE + 0xf0) | |
97 | ||
98 | /* Pixel clocks, one for TV output, doubled for VGA output */ | |
99 | #define TV_CLK 74239 | |
100 | #define VGA_CLK 37119 | |
101 | ||
102 | /* This is for 60Hz - the VTOTAL is doubled for interlaced modes */ | |
103 | #define PAL_HTOTAL 863 | |
104 | #define PAL_VTOTAL 312 | |
105 | #define NTSC_HTOTAL 857 | |
106 | #define NTSC_VTOTAL 262 | |
107 | ||
108 | /* Supported cable types */ | |
109 | enum { CT_VGA, CT_NONE, CT_RGB, CT_COMPOSITE }; | |
110 | ||
111 | /* Supported video output types */ | |
112 | enum { VO_PAL, VO_NTSC, VO_VGA }; | |
113 | ||
114 | /* Supported palette types */ | |
115 | enum { PAL_ARGB1555, PAL_RGB565, PAL_ARGB4444, PAL_ARGB8888 }; | |
116 | ||
117 | struct pvr2_params { unsigned int val; char *name; }; | |
118 | static struct pvr2_params cables[] __initdata = { | |
119 | { CT_VGA, "VGA" }, { CT_RGB, "RGB" }, { CT_COMPOSITE, "COMPOSITE" }, | |
120 | }; | |
121 | ||
122 | static struct pvr2_params outputs[] __initdata = { | |
123 | { VO_PAL, "PAL" }, { VO_NTSC, "NTSC" }, { VO_VGA, "VGA" }, | |
124 | }; | |
125 | ||
126 | /* | |
127 | * This describes the current video mode | |
128 | */ | |
129 | ||
130 | static struct pvr2fb_par { | |
131 | unsigned int hsync_total; /* Clocks/line */ | |
132 | unsigned int vsync_total; /* Lines/field */ | |
133 | unsigned int borderstart_h; | |
134 | unsigned int borderstop_h; | |
135 | unsigned int borderstart_v; | |
136 | unsigned int borderstop_v; | |
137 | unsigned int diwstart_h; /* Horizontal offset of the display field */ | |
138 | unsigned int diwstart_v; /* Vertical offset of the display field, for | |
139 | interlaced modes, this is the long field */ | |
140 | unsigned long disp_start; /* Address of image within VRAM */ | |
141 | unsigned char is_interlaced; /* Is the display interlaced? */ | |
142 | unsigned char is_doublescan; /* Are scanlines output twice? (doublescan) */ | |
143 | unsigned char is_lowres; /* Is horizontal pixel-doubling enabled? */ | |
144 | ||
145 | unsigned long mmio_base; /* MMIO base */ | |
146 | } *currentpar; | |
147 | ||
148 | static struct fb_info *fb_info; | |
149 | ||
150 | static struct fb_fix_screeninfo pvr2_fix __initdata = { | |
151 | .id = "NEC PowerVR2", | |
152 | .type = FB_TYPE_PACKED_PIXELS, | |
153 | .visual = FB_VISUAL_TRUECOLOR, | |
154 | .ypanstep = 1, | |
155 | .ywrapstep = 1, | |
156 | .accel = FB_ACCEL_NONE, | |
157 | }; | |
158 | ||
159 | static struct fb_var_screeninfo pvr2_var __initdata = { | |
160 | .xres = 640, | |
161 | .yres = 480, | |
162 | .xres_virtual = 640, | |
163 | .yres_virtual = 480, | |
164 | .bits_per_pixel =16, | |
165 | .red = { 11, 5, 0 }, | |
166 | .green = { 5, 6, 0 }, | |
167 | .blue = { 0, 5, 0 }, | |
168 | .activate = FB_ACTIVATE_NOW, | |
169 | .height = -1, | |
170 | .width = -1, | |
171 | .vmode = FB_VMODE_NONINTERLACED, | |
172 | }; | |
173 | ||
174 | static int cable_type = CT_VGA; | |
175 | static int video_output = VO_VGA; | |
176 | ||
177 | static int nopan = 0; | |
178 | static int nowrap = 1; | |
179 | ||
180 | /* | |
181 | * We do all updating, blanking, etc. during the vertical retrace period | |
182 | */ | |
183 | static unsigned int do_vmode_full = 0; /* Change the video mode */ | |
184 | static unsigned int do_vmode_pan = 0; /* Update the video mode */ | |
185 | static short do_blank = 0; /* (Un)Blank the screen */ | |
186 | ||
187 | static unsigned int is_blanked = 0; /* Is the screen blanked? */ | |
188 | ||
189 | #ifdef CONFIG_SH_STORE_QUEUES | |
d2b06a8b | 190 | static unsigned long pvr2fb_map; |
1da177e4 LT |
191 | #endif |
192 | ||
193 | #ifdef CONFIG_SH_DMA | |
194 | static unsigned int shdma = PVR2_CASCADE_CHAN; | |
195 | static unsigned int pvr2dma = ONCHIP_NR_DMA_CHANNELS; | |
196 | #endif | |
197 | ||
198 | /* Interface used by the world */ | |
199 | ||
200 | int pvr2fb_setup(char*); | |
201 | ||
202 | static int pvr2fb_setcolreg(unsigned int regno, unsigned int red, unsigned int green, unsigned int blue, | |
203 | unsigned int transp, struct fb_info *info); | |
204 | static int pvr2fb_blank(int blank, struct fb_info *info); | |
205 | static unsigned long get_line_length(int xres_virtual, int bpp); | |
206 | static void set_color_bitfields(struct fb_var_screeninfo *var); | |
207 | static int pvr2fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info); | |
208 | static int pvr2fb_set_par(struct fb_info *info); | |
209 | static void pvr2_update_display(struct fb_info *info); | |
210 | static void pvr2_init_display(struct fb_info *info); | |
211 | static void pvr2_do_blank(void); | |
7d12e780 | 212 | static irqreturn_t pvr2fb_interrupt(int irq, void *dev_id); |
1da177e4 LT |
213 | static int pvr2_init_cable(void); |
214 | static int pvr2_get_param(const struct pvr2_params *p, const char *s, | |
215 | int val, int size); | |
d2b06a8b | 216 | #ifdef CONFIG_SH_DMA |
1da177e4 LT |
217 | static ssize_t pvr2fb_write(struct file *file, const char *buf, |
218 | size_t count, loff_t *ppos); | |
d2b06a8b | 219 | #endif |
1da177e4 LT |
220 | |
221 | static struct fb_ops pvr2fb_ops = { | |
d2b06a8b PM |
222 | .owner = THIS_MODULE, |
223 | .fb_setcolreg = pvr2fb_setcolreg, | |
224 | .fb_blank = pvr2fb_blank, | |
225 | .fb_check_var = pvr2fb_check_var, | |
226 | .fb_set_par = pvr2fb_set_par, | |
1da177e4 LT |
227 | #ifdef CONFIG_SH_DMA |
228 | .fb_write = pvr2fb_write, | |
229 | #endif | |
230 | .fb_fillrect = cfb_fillrect, | |
231 | .fb_copyarea = cfb_copyarea, | |
232 | .fb_imageblit = cfb_imageblit, | |
1da177e4 LT |
233 | }; |
234 | ||
235 | static struct fb_videomode pvr2_modedb[] __initdata = { | |
236 | /* | |
237 | * Broadcast video modes (PAL and NTSC). I'm unfamiliar with | |
238 | * PAL-M and PAL-N, but from what I've read both modes parallel PAL and | |
239 | * NTSC, so it shouldn't be a problem (I hope). | |
240 | */ | |
241 | ||
242 | { | |
243 | /* 640x480 @ 60Hz interlaced (NTSC) */ | |
244 | "ntsc_640x480i", 60, 640, 480, TV_CLK, 38, 33, 0, 18, 146, 26, | |
245 | FB_SYNC_BROADCAST, FB_VMODE_INTERLACED | FB_VMODE_YWRAP | |
246 | }, { | |
247 | /* 640x240 @ 60Hz (NTSC) */ | |
248 | /* XXX: Broken! Don't use... */ | |
249 | "ntsc_640x240", 60, 640, 240, TV_CLK, 38, 33, 0, 0, 146, 22, | |
250 | FB_SYNC_BROADCAST, FB_VMODE_YWRAP | |
251 | }, { | |
252 | /* 640x480 @ 60hz (VGA) */ | |
253 | "vga_640x480", 60, 640, 480, VGA_CLK, 38, 33, 0, 18, 146, 26, | |
254 | 0, FB_VMODE_YWRAP | |
255 | }, | |
256 | }; | |
257 | ||
258 | #define NUM_TOTAL_MODES ARRAY_SIZE(pvr2_modedb) | |
259 | ||
260 | #define DEFMODE_NTSC 0 | |
261 | #define DEFMODE_PAL 0 | |
262 | #define DEFMODE_VGA 2 | |
263 | ||
264 | static int defmode = DEFMODE_NTSC; | |
265 | static char *mode_option __initdata = NULL; | |
266 | ||
267 | static inline void pvr2fb_set_pal_type(unsigned int type) | |
268 | { | |
269 | struct pvr2fb_par *par = (struct pvr2fb_par *)fb_info->par; | |
270 | ||
271 | fb_writel(type, par->mmio_base + 0x108); | |
272 | } | |
273 | ||
274 | static inline void pvr2fb_set_pal_entry(struct pvr2fb_par *par, | |
275 | unsigned int regno, | |
276 | unsigned int val) | |
277 | { | |
278 | fb_writel(val, par->mmio_base + 0x1000 + (4 * regno)); | |
279 | } | |
280 | ||
281 | static int pvr2fb_blank(int blank, struct fb_info *info) | |
282 | { | |
283 | do_blank = blank ? blank : -1; | |
284 | return 0; | |
285 | } | |
286 | ||
287 | static inline unsigned long get_line_length(int xres_virtual, int bpp) | |
288 | { | |
289 | return (unsigned long)((((xres_virtual*bpp)+31)&~31) >> 3); | |
290 | } | |
291 | ||
292 | static void set_color_bitfields(struct fb_var_screeninfo *var) | |
293 | { | |
294 | switch (var->bits_per_pixel) { | |
295 | case 16: /* RGB 565 */ | |
296 | pvr2fb_set_pal_type(PAL_RGB565); | |
297 | var->red.offset = 11; var->red.length = 5; | |
298 | var->green.offset = 5; var->green.length = 6; | |
299 | var->blue.offset = 0; var->blue.length = 5; | |
300 | var->transp.offset = 0; var->transp.length = 0; | |
301 | break; | |
302 | case 24: /* RGB 888 */ | |
303 | var->red.offset = 16; var->red.length = 8; | |
304 | var->green.offset = 8; var->green.length = 8; | |
305 | var->blue.offset = 0; var->blue.length = 8; | |
306 | var->transp.offset = 0; var->transp.length = 0; | |
307 | break; | |
308 | case 32: /* ARGB 8888 */ | |
309 | pvr2fb_set_pal_type(PAL_ARGB8888); | |
310 | var->red.offset = 16; var->red.length = 8; | |
311 | var->green.offset = 8; var->green.length = 8; | |
312 | var->blue.offset = 0; var->blue.length = 8; | |
313 | var->transp.offset = 24; var->transp.length = 8; | |
314 | break; | |
315 | } | |
316 | } | |
317 | ||
318 | static int pvr2fb_setcolreg(unsigned int regno, unsigned int red, | |
319 | unsigned int green, unsigned int blue, | |
320 | unsigned int transp, struct fb_info *info) | |
321 | { | |
322 | struct pvr2fb_par *par = (struct pvr2fb_par *)info->par; | |
323 | unsigned int tmp; | |
324 | ||
325 | if (regno > info->cmap.len) | |
326 | return 1; | |
327 | ||
328 | /* | |
329 | * We only support the hardware palette for 16 and 32bpp. It's also | |
330 | * expected that the palette format has been set by the time we get | |
331 | * here, so we don't waste time setting it again. | |
332 | */ | |
333 | switch (info->var.bits_per_pixel) { | |
334 | case 16: /* RGB 565 */ | |
335 | tmp = (red & 0xf800) | | |
336 | ((green & 0xfc00) >> 5) | | |
337 | ((blue & 0xf800) >> 11); | |
338 | ||
339 | pvr2fb_set_pal_entry(par, regno, tmp); | |
340 | ((u16*)(info->pseudo_palette))[regno] = tmp; | |
341 | break; | |
342 | case 24: /* RGB 888 */ | |
343 | red >>= 8; green >>= 8; blue >>= 8; | |
344 | ((u32*)(info->pseudo_palette))[regno] = (red << 16) | (green << 8) | blue; | |
345 | break; | |
346 | case 32: /* ARGB 8888 */ | |
347 | red >>= 8; green >>= 8; blue >>= 8; | |
348 | tmp = (transp << 24) | (red << 16) | (green << 8) | blue; | |
349 | ||
350 | pvr2fb_set_pal_entry(par, regno, tmp); | |
351 | ((u32*)(info->pseudo_palette))[regno] = tmp; | |
352 | break; | |
353 | default: | |
354 | pr_debug("Invalid bit depth %d?!?\n", info->var.bits_per_pixel); | |
355 | return 1; | |
356 | } | |
357 | ||
358 | return 0; | |
359 | } | |
360 | ||
361 | static int pvr2fb_set_par(struct fb_info *info) | |
362 | { | |
363 | struct pvr2fb_par *par = (struct pvr2fb_par *)info->par; | |
364 | struct fb_var_screeninfo *var = &info->var; | |
365 | unsigned long line_length; | |
366 | unsigned int vtotal; | |
367 | ||
368 | /* | |
369 | * XXX: It's possible that a user could use a VGA box, change the cable | |
370 | * type in hardware (i.e. switch from VGA<->composite), then change | |
371 | * modes (i.e. switching to another VT). If that happens we should | |
372 | * automagically change the output format to cope, but currently I | |
373 | * don't have a VGA box to make sure this works properly. | |
374 | */ | |
375 | cable_type = pvr2_init_cable(); | |
376 | if (cable_type == CT_VGA && video_output != VO_VGA) | |
377 | video_output = VO_VGA; | |
378 | ||
379 | var->vmode &= FB_VMODE_MASK; | |
380 | if (var->vmode & FB_VMODE_INTERLACED && video_output != VO_VGA) | |
381 | par->is_interlaced = 1; | |
382 | /* | |
383 | * XXX: Need to be more creative with this (i.e. allow doublecan for | |
384 | * PAL/NTSC output). | |
385 | */ | |
386 | if (var->vmode & FB_VMODE_DOUBLE && video_output == VO_VGA) | |
387 | par->is_doublescan = 1; | |
388 | ||
389 | par->hsync_total = var->left_margin + var->xres + var->right_margin + | |
390 | var->hsync_len; | |
391 | par->vsync_total = var->upper_margin + var->yres + var->lower_margin + | |
392 | var->vsync_len; | |
393 | ||
394 | if (var->sync & FB_SYNC_BROADCAST) { | |
395 | vtotal = par->vsync_total; | |
396 | if (par->is_interlaced) | |
397 | vtotal /= 2; | |
398 | if (vtotal > (PAL_VTOTAL + NTSC_VTOTAL)/2) { | |
399 | /* XXX: Check for start values here... */ | |
400 | /* XXX: Check hardware for PAL-compatibility */ | |
401 | par->borderstart_h = 116; | |
402 | par->borderstart_v = 44; | |
403 | } else { | |
404 | /* NTSC video output */ | |
405 | par->borderstart_h = 126; | |
406 | par->borderstart_v = 18; | |
407 | } | |
408 | } else { | |
409 | /* VGA mode */ | |
410 | /* XXX: What else needs to be checked? */ | |
411 | /* | |
412 | * XXX: We have a little freedom in VGA modes, what ranges | |
413 | * should be here (i.e. hsync/vsync totals, etc.)? | |
414 | */ | |
415 | par->borderstart_h = 126; | |
416 | par->borderstart_v = 40; | |
417 | } | |
418 | ||
419 | /* Calculate the remainding offsets */ | |
420 | par->diwstart_h = par->borderstart_h + var->left_margin; | |
421 | par->diwstart_v = par->borderstart_v + var->upper_margin; | |
422 | par->borderstop_h = par->diwstart_h + var->xres + | |
423 | var->right_margin; | |
424 | par->borderstop_v = par->diwstart_v + var->yres + | |
425 | var->lower_margin; | |
426 | ||
427 | if (!par->is_interlaced) | |
428 | par->borderstop_v /= 2; | |
429 | if (info->var.xres < 640) | |
430 | par->is_lowres = 1; | |
431 | ||
432 | line_length = get_line_length(var->xres_virtual, var->bits_per_pixel); | |
433 | par->disp_start = info->fix.smem_start + (line_length * var->yoffset) * line_length; | |
434 | info->fix.line_length = line_length; | |
435 | return 0; | |
436 | } | |
437 | ||
438 | static int pvr2fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) | |
439 | { | |
440 | struct pvr2fb_par *par = (struct pvr2fb_par *)info->par; | |
441 | unsigned int vtotal, hsync_total; | |
442 | unsigned long line_length; | |
443 | ||
444 | if (var->pixclock != TV_CLK && var->pixclock != VGA_CLK) { | |
445 | pr_debug("Invalid pixclock value %d\n", var->pixclock); | |
446 | return -EINVAL; | |
447 | } | |
448 | ||
449 | if (var->xres < 320) | |
450 | var->xres = 320; | |
451 | if (var->yres < 240) | |
452 | var->yres = 240; | |
453 | if (var->xres_virtual < var->xres) | |
454 | var->xres_virtual = var->xres; | |
455 | if (var->yres_virtual < var->yres) | |
456 | var->yres_virtual = var->yres; | |
457 | ||
458 | if (var->bits_per_pixel <= 16) | |
459 | var->bits_per_pixel = 16; | |
460 | else if (var->bits_per_pixel <= 24) | |
461 | var->bits_per_pixel = 24; | |
462 | else if (var->bits_per_pixel <= 32) | |
463 | var->bits_per_pixel = 32; | |
464 | ||
465 | set_color_bitfields(var); | |
466 | ||
467 | if (var->vmode & FB_VMODE_YWRAP) { | |
468 | if (var->xoffset || var->yoffset < 0 || | |
469 | var->yoffset >= var->yres_virtual) { | |
470 | var->xoffset = var->yoffset = 0; | |
471 | } else { | |
472 | if (var->xoffset > var->xres_virtual - var->xres || | |
473 | var->yoffset > var->yres_virtual - var->yres || | |
474 | var->xoffset < 0 || var->yoffset < 0) | |
475 | var->xoffset = var->yoffset = 0; | |
476 | } | |
477 | } else { | |
478 | var->xoffset = var->yoffset = 0; | |
479 | } | |
480 | ||
481 | /* | |
482 | * XXX: Need to be more creative with this (i.e. allow doublecan for | |
483 | * PAL/NTSC output). | |
484 | */ | |
485 | if (var->yres < 480 && video_output == VO_VGA) | |
486 | var->vmode |= FB_VMODE_DOUBLE; | |
487 | ||
488 | if (video_output != VO_VGA) { | |
489 | var->sync |= FB_SYNC_BROADCAST; | |
490 | var->vmode |= FB_VMODE_INTERLACED; | |
491 | } else { | |
492 | var->sync &= ~FB_SYNC_BROADCAST; | |
493 | var->vmode &= ~FB_VMODE_INTERLACED; | |
494 | var->vmode |= pvr2_var.vmode; | |
495 | } | |
496 | ||
497 | if ((var->activate & FB_ACTIVATE_MASK) != FB_ACTIVATE_TEST) { | |
498 | var->right_margin = par->borderstop_h - | |
499 | (par->diwstart_h + var->xres); | |
500 | var->left_margin = par->diwstart_h - par->borderstart_h; | |
501 | var->hsync_len = par->borderstart_h + | |
502 | (par->hsync_total - par->borderstop_h); | |
503 | ||
504 | var->upper_margin = par->diwstart_v - par->borderstart_v; | |
505 | var->lower_margin = par->borderstop_v - | |
506 | (par->diwstart_v + var->yres); | |
507 | var->vsync_len = par->borderstop_v + | |
508 | (par->vsync_total - par->borderstop_v); | |
509 | } | |
510 | ||
511 | hsync_total = var->left_margin + var->xres + var->right_margin + | |
512 | var->hsync_len; | |
513 | vtotal = var->upper_margin + var->yres + var->lower_margin + | |
514 | var->vsync_len; | |
515 | ||
516 | if (var->sync & FB_SYNC_BROADCAST) { | |
517 | if (var->vmode & FB_VMODE_INTERLACED) | |
518 | vtotal /= 2; | |
519 | if (vtotal > (PAL_VTOTAL + NTSC_VTOTAL)/2) { | |
520 | /* PAL video output */ | |
521 | /* XXX: Should be using a range here ... ? */ | |
522 | if (hsync_total != PAL_HTOTAL) { | |
523 | pr_debug("invalid hsync total for PAL\n"); | |
524 | return -EINVAL; | |
525 | } | |
526 | } else { | |
527 | /* NTSC video output */ | |
528 | if (hsync_total != NTSC_HTOTAL) { | |
529 | pr_debug("invalid hsync total for NTSC\n"); | |
530 | return -EINVAL; | |
531 | } | |
532 | } | |
533 | } | |
534 | ||
535 | /* Check memory sizes */ | |
536 | line_length = get_line_length(var->xres_virtual, var->bits_per_pixel); | |
537 | if (line_length * var->yres_virtual > info->fix.smem_len) | |
538 | return -ENOMEM; | |
539 | ||
540 | return 0; | |
541 | } | |
542 | ||
543 | static void pvr2_update_display(struct fb_info *info) | |
544 | { | |
545 | struct pvr2fb_par *par = (struct pvr2fb_par *) info->par; | |
546 | struct fb_var_screeninfo *var = &info->var; | |
547 | ||
548 | /* Update the start address of the display image */ | |
549 | fb_writel(par->disp_start, DISP_DIWADDRL); | |
550 | fb_writel(par->disp_start + | |
551 | get_line_length(var->xoffset+var->xres, var->bits_per_pixel), | |
552 | DISP_DIWADDRS); | |
553 | } | |
554 | ||
555 | /* | |
556 | * Initialize the video mode. Currently, the 16bpp and 24bpp modes aren't | |
557 | * very stable. It's probably due to the fact that a lot of the 2D video | |
558 | * registers are still undocumented. | |
559 | */ | |
560 | ||
561 | static void pvr2_init_display(struct fb_info *info) | |
562 | { | |
563 | struct pvr2fb_par *par = (struct pvr2fb_par *) info->par; | |
564 | struct fb_var_screeninfo *var = &info->var; | |
565 | unsigned int diw_height, diw_width, diw_modulo = 1; | |
566 | unsigned int bytesperpixel = var->bits_per_pixel >> 3; | |
567 | ||
568 | /* hsync and vsync totals */ | |
569 | fb_writel((par->vsync_total << 16) | par->hsync_total, DISP_SYNCSIZE); | |
570 | ||
571 | /* column height, modulo, row width */ | |
572 | /* since we're "panning" within vram, we need to offset things based | |
573 | * on the offset from the virtual x start to our real gfx. */ | |
574 | if (video_output != VO_VGA && par->is_interlaced) | |
575 | diw_modulo += info->fix.line_length / 4; | |
576 | diw_height = (par->is_interlaced ? var->yres / 2 : var->yres); | |
577 | diw_width = get_line_length(var->xres, var->bits_per_pixel) / 4; | |
578 | fb_writel((diw_modulo << 20) | (--diw_height << 10) | --diw_width, | |
579 | DISP_DIWSIZE); | |
580 | ||
581 | /* display address, long and short fields */ | |
582 | fb_writel(par->disp_start, DISP_DIWADDRL); | |
583 | fb_writel(par->disp_start + | |
584 | get_line_length(var->xoffset+var->xres, var->bits_per_pixel), | |
585 | DISP_DIWADDRS); | |
586 | ||
587 | /* border horizontal, border vertical, border color */ | |
588 | fb_writel((par->borderstart_h << 16) | par->borderstop_h, DISP_BRDRHORZ); | |
589 | fb_writel((par->borderstart_v << 16) | par->borderstop_v, DISP_BRDRVERT); | |
590 | fb_writel(0, DISP_BRDRCOLR); | |
591 | ||
592 | /* display window start position */ | |
593 | fb_writel(par->diwstart_h, DISP_DIWHSTRT); | |
594 | fb_writel((par->diwstart_v << 16) | par->diwstart_v, DISP_DIWVSTRT); | |
595 | ||
596 | /* misc. settings */ | |
597 | fb_writel((0x16 << 16) | par->is_lowres, DISP_DIWCONF); | |
598 | ||
599 | /* clock doubler (for VGA), scan doubler, display enable */ | |
600 | fb_writel(((video_output == VO_VGA) << 23) | | |
601 | (par->is_doublescan << 1) | 1, DISP_DIWMODE); | |
602 | ||
603 | /* bits per pixel */ | |
604 | fb_writel(fb_readl(DISP_DIWMODE) | (--bytesperpixel << 2), DISP_DIWMODE); | |
605 | ||
606 | /* video enable, color sync, interlace, | |
607 | * hsync and vsync polarity (currently unused) */ | |
608 | fb_writel(0x100 | ((par->is_interlaced /*|4*/) << 4), DISP_SYNCCONF); | |
609 | } | |
610 | ||
611 | /* Simulate blanking by making the border cover the entire screen */ | |
612 | ||
613 | #define BLANK_BIT (1<<3) | |
614 | ||
615 | static void pvr2_do_blank(void) | |
616 | { | |
617 | struct pvr2fb_par *par = currentpar; | |
618 | unsigned long diwconf; | |
619 | ||
620 | diwconf = fb_readl(DISP_DIWCONF); | |
621 | if (do_blank > 0) | |
622 | fb_writel(diwconf | BLANK_BIT, DISP_DIWCONF); | |
623 | else | |
624 | fb_writel(diwconf & ~BLANK_BIT, DISP_DIWCONF); | |
625 | ||
626 | is_blanked = do_blank > 0 ? do_blank : 0; | |
627 | } | |
628 | ||
7d12e780 | 629 | static irqreturn_t pvr2fb_interrupt(int irq, void *dev_id) |
1da177e4 LT |
630 | { |
631 | struct fb_info *info = dev_id; | |
632 | ||
633 | if (do_vmode_pan || do_vmode_full) | |
634 | pvr2_update_display(info); | |
635 | if (do_vmode_full) | |
636 | pvr2_init_display(info); | |
637 | if (do_vmode_pan) | |
638 | do_vmode_pan = 0; | |
639 | if (do_vmode_full) | |
640 | do_vmode_full = 0; | |
641 | if (do_blank) { | |
642 | pvr2_do_blank(); | |
643 | do_blank = 0; | |
644 | } | |
645 | return IRQ_HANDLED; | |
646 | } | |
647 | ||
648 | /* | |
649 | * Determine the cable type and initialize the cable output format. Don't do | |
650 | * anything if the cable type has been overidden (via "cable:XX"). | |
651 | */ | |
652 | ||
653 | #define PCTRA 0xff80002c | |
654 | #define PDTRA 0xff800030 | |
655 | #define VOUTC 0xa0702c00 | |
656 | ||
657 | static int pvr2_init_cable(void) | |
658 | { | |
659 | if (cable_type < 0) { | |
660 | fb_writel((fb_readl(PCTRA) & 0xfff0ffff) | 0x000a0000, | |
661 | PCTRA); | |
662 | cable_type = (fb_readw(PDTRA) >> 8) & 3; | |
663 | } | |
664 | ||
665 | /* Now select the output format (either composite or other) */ | |
666 | /* XXX: Save the previous val first, as this reg is also AICA | |
667 | related */ | |
668 | if (cable_type == CT_COMPOSITE) | |
669 | fb_writel(3 << 8, VOUTC); | |
670 | else | |
671 | fb_writel(0, VOUTC); | |
672 | ||
673 | return cable_type; | |
674 | } | |
675 | ||
676 | #ifdef CONFIG_SH_DMA | |
677 | static ssize_t pvr2fb_write(struct file *file, const char *buf, | |
678 | size_t count, loff_t *ppos) | |
679 | { | |
680 | unsigned long dst, start, end, len; | |
681 | unsigned int nr_pages; | |
682 | struct page **pages; | |
683 | int ret, i; | |
684 | ||
685 | nr_pages = (count + PAGE_SIZE - 1) >> PAGE_SHIFT; | |
686 | ||
687 | pages = kmalloc(nr_pages * sizeof(struct page *), GFP_KERNEL); | |
688 | if (!pages) | |
689 | return -ENOMEM; | |
690 | ||
691 | down_read(¤t->mm->mmap_sem); | |
692 | ret = get_user_pages(current, current->mm, (unsigned long)buf, | |
693 | nr_pages, WRITE, 0, pages, NULL); | |
694 | up_read(¤t->mm->mmap_sem); | |
695 | ||
696 | if (ret < nr_pages) { | |
697 | nr_pages = ret; | |
698 | ret = -EINVAL; | |
699 | goto out_unmap; | |
700 | } | |
701 | ||
702 | dma_configure_channel(shdma, 0x12c1); | |
703 | ||
704 | dst = (unsigned long)fb_info->screen_base + *ppos; | |
705 | start = (unsigned long)page_address(pages[0]); | |
706 | end = (unsigned long)page_address(pages[nr_pages]); | |
707 | len = nr_pages << PAGE_SHIFT; | |
708 | ||
709 | /* Half-assed contig check */ | |
710 | if (start + len == end) { | |
711 | /* As we do this in one shot, it's either all or nothing.. */ | |
712 | if ((*ppos + len) > fb_info->fix.smem_len) { | |
713 | ret = -ENOSPC; | |
714 | goto out_unmap; | |
715 | } | |
716 | ||
717 | dma_write(shdma, start, 0, len); | |
718 | dma_write(pvr2dma, 0, dst, len); | |
719 | dma_wait_for_completion(pvr2dma); | |
720 | ||
721 | goto out; | |
722 | } | |
723 | ||
724 | /* Not contiguous, writeout per-page instead.. */ | |
725 | for (i = 0; i < nr_pages; i++, dst += PAGE_SIZE) { | |
726 | if ((*ppos + (i << PAGE_SHIFT)) > fb_info->fix.smem_len) { | |
727 | ret = -ENOSPC; | |
728 | goto out_unmap; | |
729 | } | |
730 | ||
731 | dma_write_page(shdma, (unsigned long)page_address(pages[i]), 0); | |
732 | dma_write_page(pvr2dma, 0, dst); | |
733 | dma_wait_for_completion(pvr2dma); | |
734 | } | |
735 | ||
736 | out: | |
737 | *ppos += count; | |
738 | ret = count; | |
739 | ||
740 | out_unmap: | |
741 | for (i = 0; i < nr_pages; i++) | |
742 | page_cache_release(pages[i]); | |
743 | ||
744 | kfree(pages); | |
745 | ||
746 | return ret; | |
747 | } | |
748 | #endif /* CONFIG_SH_DMA */ | |
749 | ||
750 | /** | |
751 | * pvr2fb_common_init | |
752 | * | |
753 | * Common init code for the PVR2 chips. | |
754 | * | |
755 | * This mostly takes care of the common aspects of the fb setup and | |
756 | * registration. It's expected that the board-specific init code has | |
757 | * already setup pvr2_fix with something meaningful at this point. | |
758 | * | |
759 | * Device info reporting is also done here, as well as picking a sane | |
760 | * default from the modedb. For board-specific modelines, simply define | |
761 | * a per-board modedb. | |
762 | * | |
763 | * Also worth noting is that the cable and video output types are likely | |
764 | * always going to be VGA for the PCI-based PVR2 boards, but we leave this | |
765 | * in for flexibility anyways. Who knows, maybe someone has tv-out on a | |
766 | * PCI-based version of these things ;-) | |
767 | */ | |
768 | static int __init pvr2fb_common_init(void) | |
769 | { | |
770 | struct pvr2fb_par *par = currentpar; | |
771 | unsigned long modememused, rev; | |
772 | ||
773 | fb_info->screen_base = ioremap_nocache(pvr2_fix.smem_start, | |
774 | pvr2_fix.smem_len); | |
775 | ||
776 | if (!fb_info->screen_base) { | |
777 | printk(KERN_ERR "pvr2fb: Failed to remap smem space\n"); | |
778 | goto out_err; | |
779 | } | |
780 | ||
781 | par->mmio_base = (unsigned long)ioremap_nocache(pvr2_fix.mmio_start, | |
782 | pvr2_fix.mmio_len); | |
783 | if (!par->mmio_base) { | |
784 | printk(KERN_ERR "pvr2fb: Failed to remap mmio space\n"); | |
785 | goto out_err; | |
786 | } | |
787 | ||
d2b06a8b | 788 | fb_memset(fb_info->screen_base, 0, pvr2_fix.smem_len); |
1da177e4 LT |
789 | |
790 | pvr2_fix.ypanstep = nopan ? 0 : 1; | |
791 | pvr2_fix.ywrapstep = nowrap ? 0 : 1; | |
792 | ||
793 | fb_info->fbops = &pvr2fb_ops; | |
794 | fb_info->fix = pvr2_fix; | |
795 | fb_info->par = currentpar; | |
796 | fb_info->pseudo_palette = (void *)(fb_info->par + 1); | |
797 | fb_info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN; | |
798 | ||
799 | if (video_output == VO_VGA) | |
800 | defmode = DEFMODE_VGA; | |
801 | ||
802 | if (!mode_option) | |
803 | mode_option = "640x480@60"; | |
804 | ||
805 | if (!fb_find_mode(&fb_info->var, fb_info, mode_option, pvr2_modedb, | |
806 | NUM_TOTAL_MODES, &pvr2_modedb[defmode], 16)) | |
807 | fb_info->var = pvr2_var; | |
808 | ||
809 | fb_alloc_cmap(&fb_info->cmap, 256, 0); | |
810 | ||
811 | if (register_framebuffer(fb_info) < 0) | |
812 | goto out_err; | |
813 | ||
814 | modememused = get_line_length(fb_info->var.xres_virtual, | |
815 | fb_info->var.bits_per_pixel); | |
816 | modememused *= fb_info->var.yres_virtual; | |
817 | ||
818 | rev = fb_readl(par->mmio_base + 0x04); | |
819 | ||
820 | printk("fb%d: %s (rev %ld.%ld) frame buffer device, using %ldk/%ldk of video memory\n", | |
821 | fb_info->node, fb_info->fix.id, (rev >> 4) & 0x0f, rev & 0x0f, | |
822 | modememused >> 10, (unsigned long)(fb_info->fix.smem_len >> 10)); | |
823 | printk("fb%d: Mode %dx%d-%d pitch = %ld cable: %s video output: %s\n", | |
824 | fb_info->node, fb_info->var.xres, fb_info->var.yres, | |
d2b06a8b | 825 | fb_info->var.bits_per_pixel, |
1da177e4 LT |
826 | get_line_length(fb_info->var.xres, fb_info->var.bits_per_pixel), |
827 | (char *)pvr2_get_param(cables, NULL, cable_type, 3), | |
828 | (char *)pvr2_get_param(outputs, NULL, video_output, 3)); | |
829 | ||
830 | #ifdef CONFIG_SH_STORE_QUEUES | |
831 | printk(KERN_NOTICE "fb%d: registering with SQ API\n", fb_info->node); | |
832 | ||
833 | pvr2fb_map = sq_remap(fb_info->fix.smem_start, fb_info->fix.smem_len, | |
d2b06a8b | 834 | fb_info->fix.id, pgprot_val(PAGE_SHARED)); |
1da177e4 LT |
835 | |
836 | printk(KERN_NOTICE "fb%d: Mapped video memory to SQ addr 0x%lx\n", | |
d2b06a8b | 837 | fb_info->node, pvr2fb_map); |
1da177e4 LT |
838 | #endif |
839 | ||
840 | return 0; | |
841 | ||
842 | out_err: | |
843 | if (fb_info->screen_base) | |
844 | iounmap(fb_info->screen_base); | |
845 | if (par->mmio_base) | |
846 | iounmap((void *)par->mmio_base); | |
847 | ||
848 | return -ENXIO; | |
849 | } | |
850 | ||
851 | #ifdef CONFIG_SH_DREAMCAST | |
852 | static int __init pvr2fb_dc_init(void) | |
853 | { | |
854 | if (!mach_is_dreamcast()) | |
855 | return -ENXIO; | |
856 | ||
857 | /* Make a guess at the monitor based on the attached cable */ | |
858 | if (pvr2_init_cable() == CT_VGA) { | |
859 | fb_info->monspecs.hfmin = 30000; | |
860 | fb_info->monspecs.hfmax = 70000; | |
861 | fb_info->monspecs.vfmin = 60; | |
862 | fb_info->monspecs.vfmax = 60; | |
863 | } else { | |
864 | /* Not VGA, using a TV (taken from acornfb) */ | |
865 | fb_info->monspecs.hfmin = 15469; | |
866 | fb_info->monspecs.hfmax = 15781; | |
867 | fb_info->monspecs.vfmin = 49; | |
868 | fb_info->monspecs.vfmax = 51; | |
869 | } | |
870 | ||
871 | /* | |
872 | * XXX: This needs to pull default video output via BIOS or other means | |
873 | */ | |
874 | if (video_output < 0) { | |
875 | if (cable_type == CT_VGA) { | |
876 | video_output = VO_VGA; | |
877 | } else { | |
878 | video_output = VO_NTSC; | |
879 | } | |
880 | } | |
881 | ||
882 | /* | |
883 | * Nothing exciting about the DC PVR2 .. only a measly 8MiB. | |
884 | */ | |
885 | pvr2_fix.smem_start = 0xa5000000; /* RAM starts here */ | |
886 | pvr2_fix.smem_len = 8 << 20; | |
887 | ||
888 | pvr2_fix.mmio_start = 0xa05f8000; /* registers start here */ | |
889 | pvr2_fix.mmio_len = 0x2000; | |
890 | ||
891 | if (request_irq(HW_EVENT_VSYNC, pvr2fb_interrupt, 0, | |
892 | "pvr2 VBL handler", fb_info)) { | |
893 | return -EBUSY; | |
894 | } | |
895 | ||
896 | #ifdef CONFIG_SH_DMA | |
897 | if (request_dma(pvr2dma, "pvr2") != 0) { | |
898 | free_irq(HW_EVENT_VSYNC, 0); | |
899 | return -EBUSY; | |
900 | } | |
901 | #endif | |
902 | ||
903 | return pvr2fb_common_init(); | |
904 | } | |
905 | ||
906 | static void pvr2fb_dc_exit(void) | |
907 | { | |
295a1b47 AL |
908 | if (fb_info->screen_base) { |
909 | iounmap(fb_info->screen_base); | |
910 | fb_info->screen_base = NULL; | |
911 | } | |
912 | if (currentpar->mmio_base) { | |
913 | iounmap((void *)currentpar->mmio_base); | |
914 | currentpar->mmio_base = 0; | |
915 | } | |
916 | ||
1da177e4 LT |
917 | free_irq(HW_EVENT_VSYNC, 0); |
918 | #ifdef CONFIG_SH_DMA | |
919 | free_dma(pvr2dma); | |
920 | #endif | |
921 | } | |
922 | #endif /* CONFIG_SH_DREAMCAST */ | |
923 | ||
924 | #ifdef CONFIG_PCI | |
925 | static int __devinit pvr2fb_pci_probe(struct pci_dev *pdev, | |
926 | const struct pci_device_id *ent) | |
927 | { | |
928 | int ret; | |
929 | ||
930 | ret = pci_enable_device(pdev); | |
931 | if (ret) { | |
932 | printk(KERN_ERR "pvr2fb: PCI enable failed\n"); | |
933 | return ret; | |
934 | } | |
935 | ||
936 | ret = pci_request_regions(pdev, "pvr2fb"); | |
937 | if (ret) { | |
938 | printk(KERN_ERR "pvr2fb: PCI request regions failed\n"); | |
939 | return ret; | |
940 | } | |
941 | ||
942 | /* | |
943 | * Slightly more exciting than the DC PVR2 .. 16MiB! | |
944 | */ | |
945 | pvr2_fix.smem_start = pci_resource_start(pdev, 0); | |
946 | pvr2_fix.smem_len = pci_resource_len(pdev, 0); | |
947 | ||
948 | pvr2_fix.mmio_start = pci_resource_start(pdev, 1); | |
949 | pvr2_fix.mmio_len = pci_resource_len(pdev, 1); | |
950 | ||
951 | fb_info->device = &pdev->dev; | |
952 | ||
953 | return pvr2fb_common_init(); | |
954 | } | |
955 | ||
956 | static void __devexit pvr2fb_pci_remove(struct pci_dev *pdev) | |
957 | { | |
295a1b47 AL |
958 | if (fb_info->screen_base) { |
959 | iounmap(fb_info->screen_base); | |
960 | fb_info->screen_base = NULL; | |
961 | } | |
962 | if (currentpar->mmio_base) { | |
963 | iounmap((void *)currentpar->mmio_base); | |
964 | currentpar->mmio_base = 0; | |
965 | } | |
966 | ||
1da177e4 LT |
967 | pci_release_regions(pdev); |
968 | } | |
969 | ||
970 | static struct pci_device_id pvr2fb_pci_tbl[] __devinitdata = { | |
971 | { PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_NEON250, | |
972 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, | |
973 | { 0, }, | |
974 | }; | |
975 | ||
976 | MODULE_DEVICE_TABLE(pci, pvr2fb_pci_tbl); | |
977 | ||
978 | static struct pci_driver pvr2fb_pci_driver = { | |
979 | .name = "pvr2fb", | |
980 | .id_table = pvr2fb_pci_tbl, | |
981 | .probe = pvr2fb_pci_probe, | |
982 | .remove = __devexit_p(pvr2fb_pci_remove), | |
983 | }; | |
984 | ||
985 | static int __init pvr2fb_pci_init(void) | |
986 | { | |
987 | return pci_register_driver(&pvr2fb_pci_driver); | |
988 | } | |
989 | ||
990 | static void pvr2fb_pci_exit(void) | |
991 | { | |
992 | pci_unregister_driver(&pvr2fb_pci_driver); | |
993 | } | |
994 | #endif /* CONFIG_PCI */ | |
995 | ||
996 | static int __init pvr2_get_param(const struct pvr2_params *p, const char *s, | |
997 | int val, int size) | |
998 | { | |
999 | int i; | |
1000 | ||
1001 | for (i = 0 ; i < size ; i++ ) { | |
1002 | if (s != NULL) { | |
1003 | if (!strnicmp(p[i].name, s, strlen(s))) | |
1004 | return p[i].val; | |
1005 | } else { | |
1006 | if (p[i].val == val) | |
1007 | return (int)p[i].name; | |
1008 | } | |
1009 | } | |
1010 | return -1; | |
1011 | } | |
1012 | ||
1013 | /* | |
1014 | * Parse command arguments. Supported arguments are: | |
1015 | * inverse Use inverse color maps | |
1016 | * cable:composite|rgb|vga Override the video cable type | |
1017 | * output:NTSC|PAL|VGA Override the video output format | |
1018 | * | |
1019 | * <xres>x<yres>[-<bpp>][@<refresh>] or, | |
1020 | * <name>[-<bpp>][@<refresh>] Startup using this video mode | |
1021 | */ | |
1022 | ||
1023 | #ifndef MODULE | |
1024 | int __init pvr2fb_setup(char *options) | |
1025 | { | |
1026 | char *this_opt; | |
1027 | char cable_arg[80]; | |
1028 | char output_arg[80]; | |
1029 | ||
1030 | if (!options || !*options) | |
1031 | return 0; | |
1032 | ||
1033 | while ((this_opt = strsep(&options, ","))) { | |
1034 | if (!*this_opt) | |
1035 | continue; | |
1036 | if (!strcmp(this_opt, "inverse")) { | |
1037 | fb_invert_cmaps(); | |
1038 | } else if (!strncmp(this_opt, "cable:", 6)) { | |
1039 | strcpy(cable_arg, this_opt + 6); | |
1040 | } else if (!strncmp(this_opt, "output:", 7)) { | |
1041 | strcpy(output_arg, this_opt + 7); | |
1042 | } else if (!strncmp(this_opt, "nopan", 5)) { | |
1043 | nopan = 1; | |
1044 | } else if (!strncmp(this_opt, "nowrap", 6)) { | |
1045 | nowrap = 1; | |
1046 | } else { | |
1047 | mode_option = this_opt; | |
1048 | } | |
1049 | } | |
1050 | ||
1051 | if (*cable_arg) | |
1052 | cable_type = pvr2_get_param(cables, cable_arg, 0, 3); | |
1053 | if (*output_arg) | |
1054 | video_output = pvr2_get_param(outputs, output_arg, 0, 3); | |
1055 | ||
1056 | return 0; | |
1057 | } | |
1058 | #endif | |
1059 | ||
1060 | static struct pvr2_board { | |
1061 | int (*init)(void); | |
1062 | void (*exit)(void); | |
1063 | char name[16]; | |
1064 | } board_list[] = { | |
1065 | #ifdef CONFIG_SH_DREAMCAST | |
1066 | { pvr2fb_dc_init, pvr2fb_dc_exit, "Sega DC PVR2" }, | |
1067 | #endif | |
1068 | #ifdef CONFIG_PCI | |
1069 | { pvr2fb_pci_init, pvr2fb_pci_exit, "PCI PVR2" }, | |
1070 | #endif | |
1071 | { 0, }, | |
1072 | }; | |
1073 | ||
1074 | int __init pvr2fb_init(void) | |
1075 | { | |
1076 | int i, ret = -ENODEV; | |
1077 | int size; | |
1078 | ||
1079 | #ifndef MODULE | |
1080 | char *option = NULL; | |
1081 | ||
1082 | if (fb_get_options("pvr2fb", &option)) | |
1083 | return -ENODEV; | |
1084 | pvr2fb_setup(option); | |
1085 | #endif | |
1086 | size = sizeof(struct fb_info) + sizeof(struct pvr2fb_par) + 16 * sizeof(u32); | |
1087 | ||
1088 | fb_info = kmalloc(size, GFP_KERNEL); | |
1089 | if (!fb_info) { | |
1090 | printk(KERN_ERR "Failed to allocate memory for fb_info\n"); | |
1091 | return -ENOMEM; | |
1092 | } | |
1093 | ||
1094 | memset(fb_info, 0, size); | |
1095 | ||
1096 | currentpar = (struct pvr2fb_par *)(fb_info + 1); | |
1097 | ||
1098 | for (i = 0; i < ARRAY_SIZE(board_list); i++) { | |
1099 | struct pvr2_board *pvr_board = board_list + i; | |
1100 | ||
1101 | if (!pvr_board->init) | |
1102 | continue; | |
1103 | ||
1104 | ret = pvr_board->init(); | |
1105 | ||
1106 | if (ret != 0) { | |
1107 | printk(KERN_ERR "pvr2fb: Failed init of %s device\n", | |
1108 | pvr_board->name); | |
1109 | kfree(fb_info); | |
1110 | break; | |
1111 | } | |
1112 | } | |
1113 | ||
1114 | return ret; | |
1115 | } | |
1116 | ||
1117 | static void __exit pvr2fb_exit(void) | |
1118 | { | |
1119 | int i; | |
1120 | ||
1121 | for (i = 0; i < ARRAY_SIZE(board_list); i++) { | |
1122 | struct pvr2_board *pvr_board = board_list + i; | |
1123 | ||
1124 | if (pvr_board->exit) | |
1125 | pvr_board->exit(); | |
1126 | } | |
1127 | ||
1128 | #ifdef CONFIG_SH_STORE_QUEUES | |
1129 | sq_unmap(pvr2fb_map); | |
1130 | #endif | |
1131 | ||
1132 | unregister_framebuffer(fb_info); | |
1133 | kfree(fb_info); | |
1134 | } | |
1135 | ||
1136 | module_init(pvr2fb_init); | |
1137 | module_exit(pvr2fb_exit); | |
1138 | ||
1139 | MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>, M. R. Brown <mrbrown@0xd6.org>"); | |
1140 | MODULE_DESCRIPTION("Framebuffer driver for NEC PowerVR 2 based graphics boards"); | |
1141 | MODULE_LICENSE("GPL"); | |
1142 |