]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * linux/drivers/video/sa1100fb.c | |
3 | * | |
4 | * Copyright (C) 1999 Eric A. Thomas | |
5 | * Based on acornfb.c Copyright (C) Russell King. | |
6 | * | |
7 | * This file is subject to the terms and conditions of the GNU General Public | |
8 | * License. See the file COPYING in the main directory of this archive for | |
9 | * more details. | |
10 | * | |
11 | * StrongARM 1100 LCD Controller Frame Buffer Driver | |
12 | * | |
13 | * Please direct your questions and comments on this driver to the following | |
14 | * email address: | |
15 | * | |
16 | * linux-arm-kernel@lists.arm.linux.org.uk | |
17 | * | |
18 | * Clean patches should be sent to the ARM Linux Patch System. Please see the | |
19 | * following web page for more information: | |
20 | * | |
21 | * http://www.arm.linux.org.uk/developer/patches/info.shtml | |
22 | * | |
23 | * Thank you. | |
24 | * | |
25 | * Known problems: | |
26 | * - With the Neponset plugged into an Assabet, LCD powerdown | |
27 | * doesn't work (LCD stays powered up). Therefore we shouldn't | |
28 | * blank the screen. | |
29 | * - We don't limit the CPU clock rate nor the mode selection | |
30 | * according to the available SDRAM bandwidth. | |
31 | * | |
32 | * Other notes: | |
33 | * - Linear grayscale palettes and the kernel. | |
34 | * Such code does not belong in the kernel. The kernel frame buffer | |
35 | * drivers do not expect a linear colourmap, but a colourmap based on | |
36 | * the VT100 standard mapping. | |
37 | * | |
38 | * If your _userspace_ requires a linear colourmap, then the setup of | |
39 | * such a colourmap belongs _in userspace_, not in the kernel. Code | |
40 | * to set the colourmap correctly from user space has been sent to | |
41 | * David Neuer. It's around 8 lines of C code, plus another 4 to | |
42 | * detect if we are using grayscale. | |
43 | * | |
44 | * - The following must never be specified in a panel definition: | |
45 | * LCCR0_LtlEnd, LCCR3_PixClkDiv, LCCR3_VrtSnchL, LCCR3_HorSnchL | |
46 | * | |
47 | * - The following should be specified: | |
48 | * either LCCR0_Color or LCCR0_Mono | |
49 | * either LCCR0_Sngl or LCCR0_Dual | |
50 | * either LCCR0_Act or LCCR0_Pas | |
51 | * either LCCR3_OutEnH or LCCD3_OutEnL | |
52 | * either LCCR3_PixRsEdg or LCCR3_PixFlEdg | |
53 | * either LCCR3_ACBsDiv or LCCR3_ACBsCntOff | |
54 | * | |
55 | * Code Status: | |
56 | * 1999/04/01: | |
57 | * - Driver appears to be working for Brutus 320x200x8bpp mode. Other | |
58 | * resolutions are working, but only the 8bpp mode is supported. | |
59 | * Changes need to be made to the palette encode and decode routines | |
60 | * to support 4 and 16 bpp modes. | |
61 | * Driver is not designed to be a module. The FrameBuffer is statically | |
62 | * allocated since dynamic allocation of a 300k buffer cannot be | |
63 | * guaranteed. | |
64 | * | |
65 | * 1999/06/17: | |
66 | * - FrameBuffer memory is now allocated at run-time when the | |
67 | * driver is initialized. | |
68 | * | |
2f82af08 | 69 | * 2000/04/10: Nicolas Pitre <nico@fluxnic.net> |
1da177e4 LT |
70 | * - Big cleanup for dynamic selection of machine type at run time. |
71 | * | |
72 | * 2000/07/19: Jamey Hicks <jamey@crl.dec.com> | |
73 | * - Support for Bitsy aka Compaq iPAQ H3600 added. | |
74 | * | |
75 | * 2000/08/07: Tak-Shing Chan <tchan.rd@idthk.com> | |
76 | * Jeff Sutherland <jsutherland@accelent.com> | |
77 | * - Resolved an issue caused by a change made to the Assabet's PLD | |
78 | * earlier this year which broke the framebuffer driver for newer | |
79 | * Phase 4 Assabets. Some other parameters were changed to optimize | |
80 | * for the Sharp display. | |
81 | * | |
82 | * 2000/08/09: Kunihiko IMAI <imai@vasara.co.jp> | |
83 | * - XP860 support added | |
84 | * | |
85 | * 2000/08/19: Mark Huang <mhuang@livetoy.com> | |
86 | * - Allows standard options to be passed on the kernel command line | |
87 | * for most common passive displays. | |
88 | * | |
89 | * 2000/08/29: | |
90 | * - s/save_flags_cli/local_irq_save/ | |
91 | * - remove unneeded extra save_flags_cli in sa1100fb_enable_lcd_controller | |
92 | * | |
93 | * 2000/10/10: Erik Mouw <J.A.K.Mouw@its.tudelft.nl> | |
94 | * - Updated LART stuff. Fixed some minor bugs. | |
95 | * | |
96 | * 2000/10/30: Murphy Chen <murphy@mail.dialogue.com.tw> | |
97 | * - Pangolin support added | |
98 | * | |
99 | * 2000/10/31: Roman Jordan <jor@hoeft-wessel.de> | |
100 | * - Huw Webpanel support added | |
101 | * | |
102 | * 2000/11/23: Eric Peng <ericpeng@coventive.com> | |
103 | * - Freebird add | |
104 | * | |
105 | * 2001/02/07: Jamey Hicks <jamey.hicks@compaq.com> | |
106 | * Cliff Brake <cbrake@accelent.com> | |
107 | * - Added PM callback | |
108 | * | |
109 | * 2001/05/26: <rmk@arm.linux.org.uk> | |
110 | * - Fix 16bpp so that (a) we use the right colours rather than some | |
111 | * totally random colour depending on what was in page 0, and (b) | |
112 | * we don't de-reference a NULL pointer. | |
113 | * - remove duplicated implementation of consistent_alloc() | |
114 | * - convert dma address types to dma_addr_t | |
115 | * - remove unused 'montype' stuff | |
116 | * - remove redundant zero inits of init_var after the initial | |
59f0cb0f | 117 | * memset. |
1da177e4 LT |
118 | * - remove allow_modeset (acornfb idea does not belong here) |
119 | * | |
120 | * 2001/05/28: <rmk@arm.linux.org.uk> | |
121 | * - massive cleanup - move machine dependent data into structures | |
122 | * - I've left various #warnings in - if you see one, and know | |
123 | * the hardware concerned, please get in contact with me. | |
124 | * | |
125 | * 2001/05/31: <rmk@arm.linux.org.uk> | |
126 | * - Fix LCCR1 HSW value, fix all machine type specifications to | |
127 | * keep values in line. (Please check your machine type specs) | |
128 | * | |
129 | * 2001/06/10: <rmk@arm.linux.org.uk> | |
130 | * - Fiddle with the LCD controller from task context only; mainly | |
131 | * so that we can run with interrupts on, and sleep. | |
132 | * - Convert #warnings into #errors. No pain, no gain. ;) | |
133 | * | |
134 | * 2001/06/14: <rmk@arm.linux.org.uk> | |
135 | * - Make the palette BPS value for 12bpp come out correctly. | |
136 | * - Take notice of "greyscale" on any colour depth. | |
137 | * - Make truecolor visuals use the RGB channel encoding information. | |
138 | * | |
139 | * 2001/07/02: <rmk@arm.linux.org.uk> | |
140 | * - Fix colourmap problems. | |
141 | * | |
142 | * 2001/07/13: <abraham@2d3d.co.za> | |
143 | * - Added support for the ICP LCD-Kit01 on LART. This LCD is | |
144 | * manufactured by Prime View, model no V16C6448AB | |
145 | * | |
146 | * 2001/07/23: <rmk@arm.linux.org.uk> | |
147 | * - Hand merge version from handhelds.org CVS tree. See patch | |
148 | * notes for 595/1 for more information. | |
149 | * - Drop 12bpp (it's 16bpp with different colour register mappings). | |
150 | * - This hardware can not do direct colour. Therefore we don't | |
151 | * support it. | |
152 | * | |
153 | * 2001/07/27: <rmk@arm.linux.org.uk> | |
154 | * - Halve YRES on dual scan LCDs. | |
155 | * | |
156 | * 2001/08/22: <rmk@arm.linux.org.uk> | |
157 | * - Add b/w iPAQ pixclock value. | |
158 | * | |
159 | * 2001/10/12: <rmk@arm.linux.org.uk> | |
160 | * - Add patch 681/1 and clean up stork definitions. | |
161 | */ | |
162 | ||
1da177e4 LT |
163 | #include <linux/module.h> |
164 | #include <linux/kernel.h> | |
165 | #include <linux/sched.h> | |
166 | #include <linux/errno.h> | |
167 | #include <linux/string.h> | |
168 | #include <linux/interrupt.h> | |
169 | #include <linux/slab.h> | |
27ac792c | 170 | #include <linux/mm.h> |
1da177e4 LT |
171 | #include <linux/fb.h> |
172 | #include <linux/delay.h> | |
173 | #include <linux/init.h> | |
174 | #include <linux/ioport.h> | |
175 | #include <linux/cpufreq.h> | |
d052d1be | 176 | #include <linux/platform_device.h> |
1da177e4 | 177 | #include <linux/dma-mapping.h> |
7951ac91 | 178 | #include <linux/mutex.h> |
99730225 | 179 | #include <linux/io.h> |
1da177e4 | 180 | |
a09e64fb | 181 | #include <mach/hardware.h> |
1da177e4 | 182 | #include <asm/mach-types.h> |
a09e64fb RK |
183 | #include <mach/assabet.h> |
184 | #include <mach/shannon.h> | |
1da177e4 | 185 | |
1da177e4 LT |
186 | /* |
187 | * Complain if VAR is out of range. | |
188 | */ | |
189 | #define DEBUG_VAR 1 | |
190 | ||
191 | #undef ASSABET_PAL_VIDEO | |
192 | ||
193 | #include "sa1100fb.h" | |
194 | ||
195 | extern void (*sa1100fb_backlight_power)(int on); | |
196 | extern void (*sa1100fb_lcd_power)(int on); | |
197 | ||
58f5cbf2 | 198 | static const struct sa1100fb_rgb rgb_4 = { |
1da177e4 LT |
199 | .red = { .offset = 0, .length = 4, }, |
200 | .green = { .offset = 0, .length = 4, }, | |
201 | .blue = { .offset = 0, .length = 4, }, | |
202 | .transp = { .offset = 0, .length = 0, }, | |
203 | }; | |
204 | ||
58f5cbf2 | 205 | static const struct sa1100fb_rgb rgb_8 = { |
0a453480 MJ |
206 | .red = { .offset = 0, .length = 8, }, |
207 | .green = { .offset = 0, .length = 8, }, | |
208 | .blue = { .offset = 0, .length = 8, }, | |
209 | .transp = { .offset = 0, .length = 0, }, | |
210 | }; | |
211 | ||
58f5cbf2 | 212 | static const struct sa1100fb_rgb def_rgb_16 = { |
1da177e4 LT |
213 | .red = { .offset = 11, .length = 5, }, |
214 | .green = { .offset = 5, .length = 6, }, | |
215 | .blue = { .offset = 0, .length = 5, }, | |
216 | .transp = { .offset = 0, .length = 0, }, | |
217 | }; | |
218 | ||
219 | #ifdef CONFIG_SA1100_ASSABET | |
220 | #ifndef ASSABET_PAL_VIDEO | |
221 | /* | |
222 | * The assabet uses a sharp LQ039Q2DS54 LCD module. It is actually | |
223 | * takes an RGB666 signal, but we provide it with an RGB565 signal | |
224 | * instead (def_rgb_16). | |
225 | */ | |
66564d83 | 226 | static struct sa1100fb_mach_info lq039q2ds54_info __devinitdata = { |
1da177e4 LT |
227 | .pixclock = 171521, .bpp = 16, |
228 | .xres = 320, .yres = 240, | |
229 | ||
230 | .hsync_len = 5, .vsync_len = 1, | |
231 | .left_margin = 61, .upper_margin = 3, | |
232 | .right_margin = 9, .lower_margin = 0, | |
233 | ||
234 | .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, | |
235 | ||
236 | .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, | |
237 | .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2), | |
238 | }; | |
239 | #else | |
66564d83 | 240 | static struct sa1100fb_mach_info pal_info __devinitdata = { |
1da177e4 LT |
241 | .pixclock = 67797, .bpp = 16, |
242 | .xres = 640, .yres = 512, | |
243 | ||
244 | .hsync_len = 64, .vsync_len = 6, | |
245 | .left_margin = 125, .upper_margin = 70, | |
246 | .right_margin = 115, .lower_margin = 36, | |
247 | ||
248 | .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, | |
249 | .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(512), | |
250 | }; | |
251 | #endif | |
252 | #endif | |
253 | ||
1da177e4 | 254 | #ifdef CONFIG_SA1100_H3600 |
66564d83 | 255 | static struct sa1100fb_mach_info h3600_info __devinitdata = { |
1da177e4 LT |
256 | .pixclock = 174757, .bpp = 16, |
257 | .xres = 320, .yres = 240, | |
258 | ||
259 | .hsync_len = 3, .vsync_len = 3, | |
260 | .left_margin = 12, .upper_margin = 10, | |
261 | .right_margin = 17, .lower_margin = 1, | |
262 | ||
263 | .cmap_static = 1, | |
264 | ||
265 | .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, | |
266 | .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2), | |
267 | }; | |
268 | ||
58f5cbf2 | 269 | static const struct sa1100fb_rgb h3600_rgb_16 = { |
1da177e4 LT |
270 | .red = { .offset = 12, .length = 4, }, |
271 | .green = { .offset = 7, .length = 4, }, | |
272 | .blue = { .offset = 1, .length = 4, }, | |
273 | .transp = { .offset = 0, .length = 0, }, | |
274 | }; | |
275 | #endif | |
276 | ||
277 | #ifdef CONFIG_SA1100_H3100 | |
66564d83 | 278 | static struct sa1100fb_mach_info h3100_info __devinitdata = { |
1da177e4 LT |
279 | .pixclock = 406977, .bpp = 4, |
280 | .xres = 320, .yres = 240, | |
281 | ||
282 | .hsync_len = 26, .vsync_len = 41, | |
283 | .left_margin = 4, .upper_margin = 0, | |
284 | .right_margin = 4, .lower_margin = 0, | |
285 | ||
286 | .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, | |
287 | .cmap_greyscale = 1, | |
288 | .cmap_inverse = 1, | |
289 | ||
290 | .lccr0 = LCCR0_Mono | LCCR0_4PixMono | LCCR0_Sngl | LCCR0_Pas, | |
291 | .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2), | |
292 | }; | |
293 | #endif | |
294 | ||
295 | #ifdef CONFIG_SA1100_COLLIE | |
66564d83 | 296 | static struct sa1100fb_mach_info collie_info __devinitdata = { |
1da177e4 LT |
297 | .pixclock = 171521, .bpp = 16, |
298 | .xres = 320, .yres = 240, | |
299 | ||
300 | .hsync_len = 5, .vsync_len = 1, | |
301 | .left_margin = 11, .upper_margin = 2, | |
302 | .right_margin = 30, .lower_margin = 0, | |
303 | ||
304 | .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, | |
305 | ||
306 | .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, | |
307 | .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2), | |
308 | }; | |
309 | #endif | |
310 | ||
311 | #ifdef LART_GREY_LCD | |
66564d83 | 312 | static struct sa1100fb_mach_info lart_grey_info __devinitdata = { |
1da177e4 LT |
313 | .pixclock = 150000, .bpp = 4, |
314 | .xres = 320, .yres = 240, | |
315 | ||
316 | .hsync_len = 1, .vsync_len = 1, | |
317 | .left_margin = 4, .upper_margin = 0, | |
318 | .right_margin = 2, .lower_margin = 0, | |
319 | ||
320 | .cmap_greyscale = 1, | |
321 | .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, | |
322 | ||
323 | .lccr0 = LCCR0_Mono | LCCR0_Sngl | LCCR0_Pas | LCCR0_4PixMono, | |
324 | .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(512), | |
325 | }; | |
326 | #endif | |
327 | #ifdef LART_COLOR_LCD | |
66564d83 | 328 | static struct sa1100fb_mach_info lart_color_info __devinitdata = { |
1da177e4 LT |
329 | .pixclock = 150000, .bpp = 16, |
330 | .xres = 320, .yres = 240, | |
331 | ||
332 | .hsync_len = 2, .vsync_len = 3, | |
333 | .left_margin = 69, .upper_margin = 14, | |
334 | .right_margin = 8, .lower_margin = 4, | |
335 | ||
336 | .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, | |
337 | .lccr3 = LCCR3_OutEnH | LCCR3_PixFlEdg | LCCR3_ACBsDiv(512), | |
338 | }; | |
339 | #endif | |
340 | #ifdef LART_VIDEO_OUT | |
66564d83 | 341 | static struct sa1100fb_mach_info lart_video_info __devinitdata = { |
1da177e4 LT |
342 | .pixclock = 39721, .bpp = 16, |
343 | .xres = 640, .yres = 480, | |
344 | ||
345 | .hsync_len = 95, .vsync_len = 2, | |
346 | .left_margin = 40, .upper_margin = 32, | |
347 | .right_margin = 24, .lower_margin = 11, | |
348 | ||
349 | .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, | |
350 | ||
351 | .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, | |
352 | .lccr3 = LCCR3_OutEnL | LCCR3_PixFlEdg | LCCR3_ACBsDiv(512), | |
353 | }; | |
354 | #endif | |
355 | ||
356 | #ifdef LART_KIT01_LCD | |
66564d83 | 357 | static struct sa1100fb_mach_info lart_kit01_info __devinitdata = { |
1da177e4 LT |
358 | .pixclock = 63291, .bpp = 16, |
359 | .xres = 640, .yres = 480, | |
360 | ||
361 | .hsync_len = 64, .vsync_len = 3, | |
362 | .left_margin = 122, .upper_margin = 45, | |
363 | .right_margin = 10, .lower_margin = 10, | |
364 | ||
365 | .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, | |
366 | .lccr3 = LCCR3_OutEnH | LCCR3_PixFlEdg | |
367 | }; | |
368 | #endif | |
369 | ||
370 | #ifdef CONFIG_SA1100_SHANNON | |
66564d83 | 371 | static struct sa1100fb_mach_info shannon_info __devinitdata = { |
1da177e4 LT |
372 | .pixclock = 152500, .bpp = 8, |
373 | .xres = 640, .yres = 480, | |
374 | ||
375 | .hsync_len = 4, .vsync_len = 3, | |
376 | .left_margin = 2, .upper_margin = 0, | |
377 | .right_margin = 1, .lower_margin = 0, | |
378 | ||
379 | .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, | |
380 | ||
381 | .lccr0 = LCCR0_Color | LCCR0_Dual | LCCR0_Pas, | |
382 | .lccr3 = LCCR3_ACBsDiv(512), | |
383 | }; | |
384 | #endif | |
385 | ||
386 | ||
387 | ||
66564d83 | 388 | static struct sa1100fb_mach_info * __devinit |
1da177e4 LT |
389 | sa1100fb_get_machine_info(struct sa1100fb_info *fbi) |
390 | { | |
391 | struct sa1100fb_mach_info *inf = NULL; | |
392 | ||
393 | /* | |
394 | * R G B T | |
395 | * default {11,5}, { 5,6}, { 0,5}, { 0,0} | |
396 | * h3600 {12,4}, { 7,4}, { 1,4}, { 0,0} | |
397 | * freebird { 8,4}, { 4,4}, { 0,4}, {12,4} | |
398 | */ | |
399 | #ifdef CONFIG_SA1100_ASSABET | |
400 | if (machine_is_assabet()) { | |
401 | #ifndef ASSABET_PAL_VIDEO | |
402 | inf = &lq039q2ds54_info; | |
403 | #else | |
404 | inf = &pal_info; | |
405 | #endif | |
406 | } | |
407 | #endif | |
408 | #ifdef CONFIG_SA1100_H3100 | |
409 | if (machine_is_h3100()) { | |
410 | inf = &h3100_info; | |
411 | } | |
412 | #endif | |
413 | #ifdef CONFIG_SA1100_H3600 | |
414 | if (machine_is_h3600()) { | |
415 | inf = &h3600_info; | |
416 | fbi->rgb[RGB_16] = &h3600_rgb_16; | |
417 | } | |
418 | #endif | |
1da177e4 LT |
419 | #ifdef CONFIG_SA1100_COLLIE |
420 | if (machine_is_collie()) { | |
421 | inf = &collie_info; | |
422 | } | |
423 | #endif | |
424 | #ifdef CONFIG_SA1100_LART | |
425 | if (machine_is_lart()) { | |
426 | #ifdef LART_GREY_LCD | |
427 | inf = &lart_grey_info; | |
428 | #endif | |
429 | #ifdef LART_COLOR_LCD | |
430 | inf = &lart_color_info; | |
431 | #endif | |
432 | #ifdef LART_VIDEO_OUT | |
433 | inf = &lart_video_info; | |
434 | #endif | |
435 | #ifdef LART_KIT01_LCD | |
436 | inf = &lart_kit01_info; | |
437 | #endif | |
438 | } | |
439 | #endif | |
440 | #ifdef CONFIG_SA1100_SHANNON | |
441 | if (machine_is_shannon()) { | |
442 | inf = &shannon_info; | |
443 | } | |
444 | #endif | |
445 | return inf; | |
446 | } | |
447 | ||
448 | static int sa1100fb_activate_var(struct fb_var_screeninfo *var, struct sa1100fb_info *); | |
449 | static void set_ctrlr_state(struct sa1100fb_info *fbi, u_int state); | |
450 | ||
451 | static inline void sa1100fb_schedule_work(struct sa1100fb_info *fbi, u_int state) | |
452 | { | |
453 | unsigned long flags; | |
454 | ||
455 | local_irq_save(flags); | |
456 | /* | |
457 | * We need to handle two requests being made at the same time. | |
458 | * There are two important cases: | |
459 | * 1. When we are changing VT (C_REENABLE) while unblanking (C_ENABLE) | |
460 | * We must perform the unblanking, which will do our REENABLE for us. | |
461 | * 2. When we are blanking, but immediately unblank before we have | |
462 | * blanked. We do the "REENABLE" thing here as well, just to be sure. | |
463 | */ | |
464 | if (fbi->task_state == C_ENABLE && state == C_REENABLE) | |
465 | state = (u_int) -1; | |
466 | if (fbi->task_state == C_DISABLE && state == C_ENABLE) | |
467 | state = C_REENABLE; | |
468 | ||
469 | if (state != (u_int)-1) { | |
470 | fbi->task_state = state; | |
471 | schedule_work(&fbi->task); | |
472 | } | |
473 | local_irq_restore(flags); | |
474 | } | |
475 | ||
476 | static inline u_int chan_to_field(u_int chan, struct fb_bitfield *bf) | |
477 | { | |
478 | chan &= 0xffff; | |
479 | chan >>= 16 - bf->length; | |
480 | return chan << bf->offset; | |
481 | } | |
482 | ||
483 | /* | |
484 | * Convert bits-per-pixel to a hardware palette PBS value. | |
485 | */ | |
486 | static inline u_int palette_pbs(struct fb_var_screeninfo *var) | |
487 | { | |
488 | int ret = 0; | |
489 | switch (var->bits_per_pixel) { | |
490 | case 4: ret = 0 << 12; break; | |
491 | case 8: ret = 1 << 12; break; | |
492 | case 16: ret = 2 << 12; break; | |
493 | } | |
494 | return ret; | |
495 | } | |
496 | ||
497 | static int | |
498 | sa1100fb_setpalettereg(u_int regno, u_int red, u_int green, u_int blue, | |
499 | u_int trans, struct fb_info *info) | |
500 | { | |
501 | struct sa1100fb_info *fbi = (struct sa1100fb_info *)info; | |
502 | u_int val, ret = 1; | |
503 | ||
504 | if (regno < fbi->palette_size) { | |
505 | val = ((red >> 4) & 0xf00); | |
506 | val |= ((green >> 8) & 0x0f0); | |
507 | val |= ((blue >> 12) & 0x00f); | |
508 | ||
509 | if (regno == 0) | |
510 | val |= palette_pbs(&fbi->fb.var); | |
511 | ||
512 | fbi->palette_cpu[regno] = val; | |
513 | ret = 0; | |
514 | } | |
515 | return ret; | |
516 | } | |
517 | ||
518 | static int | |
519 | sa1100fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, | |
520 | u_int trans, struct fb_info *info) | |
521 | { | |
522 | struct sa1100fb_info *fbi = (struct sa1100fb_info *)info; | |
523 | unsigned int val; | |
524 | int ret = 1; | |
525 | ||
526 | /* | |
527 | * If inverse mode was selected, invert all the colours | |
528 | * rather than the register number. The register number | |
529 | * is what you poke into the framebuffer to produce the | |
530 | * colour you requested. | |
531 | */ | |
532 | if (fbi->cmap_inverse) { | |
533 | red = 0xffff - red; | |
534 | green = 0xffff - green; | |
535 | blue = 0xffff - blue; | |
536 | } | |
537 | ||
538 | /* | |
539 | * If greyscale is true, then we convert the RGB value | |
540 | * to greyscale no mater what visual we are using. | |
541 | */ | |
542 | if (fbi->fb.var.grayscale) | |
543 | red = green = blue = (19595 * red + 38470 * green + | |
544 | 7471 * blue) >> 16; | |
545 | ||
546 | switch (fbi->fb.fix.visual) { | |
547 | case FB_VISUAL_TRUECOLOR: | |
548 | /* | |
549 | * 12 or 16-bit True Colour. We encode the RGB value | |
550 | * according to the RGB bitfield information. | |
551 | */ | |
552 | if (regno < 16) { | |
553 | u32 *pal = fbi->fb.pseudo_palette; | |
554 | ||
555 | val = chan_to_field(red, &fbi->fb.var.red); | |
556 | val |= chan_to_field(green, &fbi->fb.var.green); | |
557 | val |= chan_to_field(blue, &fbi->fb.var.blue); | |
558 | ||
559 | pal[regno] = val; | |
560 | ret = 0; | |
561 | } | |
562 | break; | |
563 | ||
564 | case FB_VISUAL_STATIC_PSEUDOCOLOR: | |
565 | case FB_VISUAL_PSEUDOCOLOR: | |
566 | ret = sa1100fb_setpalettereg(regno, red, green, blue, trans, info); | |
567 | break; | |
568 | } | |
569 | ||
570 | return ret; | |
571 | } | |
572 | ||
6edb7467 | 573 | #ifdef CONFIG_CPU_FREQ |
1da177e4 LT |
574 | /* |
575 | * sa1100fb_display_dma_period() | |
576 | * Calculate the minimum period (in picoseconds) between two DMA | |
577 | * requests for the LCD controller. If we hit this, it means we're | |
578 | * doing nothing but LCD DMA. | |
579 | */ | |
fc1df37e | 580 | static inline unsigned int sa1100fb_display_dma_period(struct fb_var_screeninfo *var) |
1da177e4 LT |
581 | { |
582 | /* | |
583 | * Period = pixclock * bits_per_byte * bytes_per_transfer | |
584 | * / memory_bits_per_pixel; | |
585 | */ | |
586 | return var->pixclock * 8 * 16 / var->bits_per_pixel; | |
587 | } | |
6edb7467 | 588 | #endif |
1da177e4 LT |
589 | |
590 | /* | |
591 | * sa1100fb_check_var(): | |
592 | * Round up in the following order: bits_per_pixel, xres, | |
593 | * yres, xres_virtual, yres_virtual, xoffset, yoffset, grayscale, | |
594 | * bitfields, horizontal timing, vertical timing. | |
595 | */ | |
596 | static int | |
597 | sa1100fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) | |
598 | { | |
599 | struct sa1100fb_info *fbi = (struct sa1100fb_info *)info; | |
600 | int rgbidx; | |
601 | ||
602 | if (var->xres < MIN_XRES) | |
603 | var->xres = MIN_XRES; | |
604 | if (var->yres < MIN_YRES) | |
605 | var->yres = MIN_YRES; | |
606 | if (var->xres > fbi->max_xres) | |
607 | var->xres = fbi->max_xres; | |
608 | if (var->yres > fbi->max_yres) | |
609 | var->yres = fbi->max_yres; | |
610 | var->xres_virtual = max(var->xres_virtual, var->xres); | |
611 | var->yres_virtual = max(var->yres_virtual, var->yres); | |
612 | ||
79889296 | 613 | dev_dbg(fbi->dev, "var->bits_per_pixel=%d\n", var->bits_per_pixel); |
1da177e4 LT |
614 | switch (var->bits_per_pixel) { |
615 | case 4: | |
0a453480 | 616 | rgbidx = RGB_4; |
1da177e4 LT |
617 | break; |
618 | case 8: | |
619 | rgbidx = RGB_8; | |
620 | break; | |
621 | case 16: | |
622 | rgbidx = RGB_16; | |
623 | break; | |
624 | default: | |
625 | return -EINVAL; | |
626 | } | |
627 | ||
628 | /* | |
629 | * Copy the RGB parameters for this display | |
630 | * from the machine specific parameters. | |
631 | */ | |
632 | var->red = fbi->rgb[rgbidx]->red; | |
633 | var->green = fbi->rgb[rgbidx]->green; | |
634 | var->blue = fbi->rgb[rgbidx]->blue; | |
635 | var->transp = fbi->rgb[rgbidx]->transp; | |
636 | ||
79889296 | 637 | dev_dbg(fbi->dev, "RGBT length = %d:%d:%d:%d\n", |
1da177e4 LT |
638 | var->red.length, var->green.length, var->blue.length, |
639 | var->transp.length); | |
640 | ||
79889296 | 641 | dev_dbg(fbi->dev, "RGBT offset = %d:%d:%d:%d\n", |
1da177e4 LT |
642 | var->red.offset, var->green.offset, var->blue.offset, |
643 | var->transp.offset); | |
644 | ||
645 | #ifdef CONFIG_CPU_FREQ | |
79889296 | 646 | dev_dbg(fbi->dev, "dma period = %d ps, clock = %d kHz\n", |
1da177e4 LT |
647 | sa1100fb_display_dma_period(var), |
648 | cpufreq_get(smp_processor_id())); | |
649 | #endif | |
650 | ||
651 | return 0; | |
652 | } | |
653 | ||
654 | static inline void sa1100fb_set_truecolor(u_int is_true_color) | |
655 | { | |
656 | if (machine_is_assabet()) { | |
657 | #if 1 // phase 4 or newer Assabet's | |
658 | if (is_true_color) | |
659 | ASSABET_BCR_set(ASSABET_BCR_LCD_12RGB); | |
660 | else | |
661 | ASSABET_BCR_clear(ASSABET_BCR_LCD_12RGB); | |
662 | #else | |
663 | // older Assabet's | |
664 | if (is_true_color) | |
665 | ASSABET_BCR_clear(ASSABET_BCR_LCD_12RGB); | |
666 | else | |
667 | ASSABET_BCR_set(ASSABET_BCR_LCD_12RGB); | |
668 | #endif | |
669 | } | |
670 | } | |
671 | ||
672 | /* | |
673 | * sa1100fb_set_par(): | |
674 | * Set the user defined part of the display for the specified console | |
675 | */ | |
676 | static int sa1100fb_set_par(struct fb_info *info) | |
677 | { | |
678 | struct sa1100fb_info *fbi = (struct sa1100fb_info *)info; | |
679 | struct fb_var_screeninfo *var = &info->var; | |
680 | unsigned long palette_mem_size; | |
681 | ||
79889296 | 682 | dev_dbg(fbi->dev, "set_par\n"); |
1da177e4 LT |
683 | |
684 | if (var->bits_per_pixel == 16) | |
685 | fbi->fb.fix.visual = FB_VISUAL_TRUECOLOR; | |
686 | else if (!fbi->cmap_static) | |
687 | fbi->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR; | |
688 | else { | |
689 | /* | |
690 | * Some people have weird ideas about wanting static | |
691 | * pseudocolor maps. I suspect their user space | |
692 | * applications are broken. | |
693 | */ | |
694 | fbi->fb.fix.visual = FB_VISUAL_STATIC_PSEUDOCOLOR; | |
695 | } | |
696 | ||
697 | fbi->fb.fix.line_length = var->xres_virtual * | |
698 | var->bits_per_pixel / 8; | |
699 | fbi->palette_size = var->bits_per_pixel == 8 ? 256 : 16; | |
700 | ||
701 | palette_mem_size = fbi->palette_size * sizeof(u16); | |
702 | ||
79889296 | 703 | dev_dbg(fbi->dev, "palette_mem_size = 0x%08lx\n", palette_mem_size); |
1da177e4 LT |
704 | |
705 | fbi->palette_cpu = (u16 *)(fbi->map_cpu + PAGE_SIZE - palette_mem_size); | |
706 | fbi->palette_dma = fbi->map_dma + PAGE_SIZE - palette_mem_size; | |
707 | ||
708 | /* | |
709 | * Set (any) board control register to handle new color depth | |
710 | */ | |
711 | sa1100fb_set_truecolor(fbi->fb.fix.visual == FB_VISUAL_TRUECOLOR); | |
712 | sa1100fb_activate_var(var, fbi); | |
713 | ||
714 | return 0; | |
715 | } | |
716 | ||
717 | #if 0 | |
718 | static int | |
719 | sa1100fb_set_cmap(struct fb_cmap *cmap, int kspc, int con, | |
720 | struct fb_info *info) | |
721 | { | |
722 | struct sa1100fb_info *fbi = (struct sa1100fb_info *)info; | |
723 | ||
724 | /* | |
725 | * Make sure the user isn't doing something stupid. | |
726 | */ | |
727 | if (!kspc && (fbi->fb.var.bits_per_pixel == 16 || fbi->cmap_static)) | |
728 | return -EINVAL; | |
729 | ||
730 | return gen_set_cmap(cmap, kspc, con, info); | |
731 | } | |
732 | #endif | |
733 | ||
734 | /* | |
735 | * Formal definition of the VESA spec: | |
736 | * On | |
737 | * This refers to the state of the display when it is in full operation | |
738 | * Stand-By | |
739 | * This defines an optional operating state of minimal power reduction with | |
740 | * the shortest recovery time | |
741 | * Suspend | |
742 | * This refers to a level of power management in which substantial power | |
743 | * reduction is achieved by the display. The display can have a longer | |
744 | * recovery time from this state than from the Stand-by state | |
745 | * Off | |
746 | * This indicates that the display is consuming the lowest level of power | |
747 | * and is non-operational. Recovery from this state may optionally require | |
748 | * the user to manually power on the monitor | |
749 | * | |
750 | * Now, the fbdev driver adds an additional state, (blank), where they | |
751 | * turn off the video (maybe by colormap tricks), but don't mess with the | |
752 | * video itself: think of it semantically between on and Stand-By. | |
753 | * | |
754 | * So here's what we should do in our fbdev blank routine: | |
755 | * | |
756 | * VESA_NO_BLANKING (mode 0) Video on, front/back light on | |
757 | * VESA_VSYNC_SUSPEND (mode 1) Video on, front/back light off | |
758 | * VESA_HSYNC_SUSPEND (mode 2) Video on, front/back light off | |
759 | * VESA_POWERDOWN (mode 3) Video off, front/back light off | |
760 | * | |
761 | * This will match the matrox implementation. | |
762 | */ | |
763 | /* | |
764 | * sa1100fb_blank(): | |
765 | * Blank the display by setting all palette values to zero. Note, the | |
766 | * 12 and 16 bpp modes don't really use the palette, so this will not | |
767 | * blank the display in all modes. | |
768 | */ | |
769 | static int sa1100fb_blank(int blank, struct fb_info *info) | |
770 | { | |
771 | struct sa1100fb_info *fbi = (struct sa1100fb_info *)info; | |
772 | int i; | |
773 | ||
79889296 | 774 | dev_dbg(fbi->dev, "sa1100fb_blank: blank=%d\n", blank); |
1da177e4 LT |
775 | |
776 | switch (blank) { | |
777 | case FB_BLANK_POWERDOWN: | |
778 | case FB_BLANK_VSYNC_SUSPEND: | |
779 | case FB_BLANK_HSYNC_SUSPEND: | |
780 | case FB_BLANK_NORMAL: | |
781 | if (fbi->fb.fix.visual == FB_VISUAL_PSEUDOCOLOR || | |
782 | fbi->fb.fix.visual == FB_VISUAL_STATIC_PSEUDOCOLOR) | |
783 | for (i = 0; i < fbi->palette_size; i++) | |
784 | sa1100fb_setpalettereg(i, 0, 0, 0, 0, info); | |
785 | sa1100fb_schedule_work(fbi, C_DISABLE); | |
786 | break; | |
787 | ||
788 | case FB_BLANK_UNBLANK: | |
789 | if (fbi->fb.fix.visual == FB_VISUAL_PSEUDOCOLOR || | |
790 | fbi->fb.fix.visual == FB_VISUAL_STATIC_PSEUDOCOLOR) | |
791 | fb_set_cmap(&fbi->fb.cmap, info); | |
792 | sa1100fb_schedule_work(fbi, C_ENABLE); | |
793 | } | |
794 | return 0; | |
795 | } | |
796 | ||
216d526c | 797 | static int sa1100fb_mmap(struct fb_info *info, |
1da177e4 LT |
798 | struct vm_area_struct *vma) |
799 | { | |
800 | struct sa1100fb_info *fbi = (struct sa1100fb_info *)info; | |
801 | unsigned long start, len, off = vma->vm_pgoff << PAGE_SHIFT; | |
802 | ||
803 | if (off < info->fix.smem_len) { | |
804 | vma->vm_pgoff += 1; /* skip over the palette */ | |
805 | return dma_mmap_writecombine(fbi->dev, vma, fbi->map_cpu, | |
806 | fbi->map_dma, fbi->map_size); | |
807 | } | |
808 | ||
809 | start = info->fix.mmio_start; | |
810 | len = PAGE_ALIGN((start & ~PAGE_MASK) + info->fix.mmio_len); | |
811 | ||
812 | if ((vma->vm_end - vma->vm_start + off) > len) | |
813 | return -EINVAL; | |
814 | ||
815 | off += start & PAGE_MASK; | |
816 | vma->vm_pgoff = off >> PAGE_SHIFT; | |
817 | vma->vm_flags |= VM_IO; | |
818 | vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); | |
819 | return io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT, | |
820 | vma->vm_end - vma->vm_start, | |
821 | vma->vm_page_prot); | |
822 | } | |
823 | ||
824 | static struct fb_ops sa1100fb_ops = { | |
825 | .owner = THIS_MODULE, | |
826 | .fb_check_var = sa1100fb_check_var, | |
827 | .fb_set_par = sa1100fb_set_par, | |
828 | // .fb_set_cmap = sa1100fb_set_cmap, | |
829 | .fb_setcolreg = sa1100fb_setcolreg, | |
830 | .fb_fillrect = cfb_fillrect, | |
831 | .fb_copyarea = cfb_copyarea, | |
832 | .fb_imageblit = cfb_imageblit, | |
833 | .fb_blank = sa1100fb_blank, | |
1da177e4 LT |
834 | .fb_mmap = sa1100fb_mmap, |
835 | }; | |
836 | ||
837 | /* | |
838 | * Calculate the PCD value from the clock rate (in picoseconds). | |
839 | * We take account of the PPCR clock setting. | |
840 | */ | |
841 | static inline unsigned int get_pcd(unsigned int pixclock, unsigned int cpuclock) | |
842 | { | |
843 | unsigned int pcd = cpuclock / 100; | |
844 | ||
845 | pcd *= pixclock; | |
846 | pcd /= 10000000; | |
847 | ||
848 | return pcd + 1; /* make up for integer math truncations */ | |
849 | } | |
850 | ||
851 | /* | |
852 | * sa1100fb_activate_var(): | |
853 | * Configures LCD Controller based on entries in var parameter. Settings are | |
854 | * only written to the controller if changes were made. | |
855 | */ | |
856 | static int sa1100fb_activate_var(struct fb_var_screeninfo *var, struct sa1100fb_info *fbi) | |
857 | { | |
858 | struct sa1100fb_lcd_reg new_regs; | |
859 | u_int half_screen_size, yres, pcd; | |
860 | u_long flags; | |
861 | ||
79889296 | 862 | dev_dbg(fbi->dev, "Configuring SA1100 LCD\n"); |
1da177e4 | 863 | |
79889296 | 864 | dev_dbg(fbi->dev, "var: xres=%d hslen=%d lm=%d rm=%d\n", |
1da177e4 LT |
865 | var->xres, var->hsync_len, |
866 | var->left_margin, var->right_margin); | |
79889296 | 867 | dev_dbg(fbi->dev, "var: yres=%d vslen=%d um=%d bm=%d\n", |
1da177e4 LT |
868 | var->yres, var->vsync_len, |
869 | var->upper_margin, var->lower_margin); | |
870 | ||
871 | #if DEBUG_VAR | |
872 | if (var->xres < 16 || var->xres > 1024) | |
79889296 | 873 | dev_err(fbi->dev, "%s: invalid xres %d\n", |
1da177e4 LT |
874 | fbi->fb.fix.id, var->xres); |
875 | if (var->hsync_len < 1 || var->hsync_len > 64) | |
79889296 | 876 | dev_err(fbi->dev, "%s: invalid hsync_len %d\n", |
1da177e4 LT |
877 | fbi->fb.fix.id, var->hsync_len); |
878 | if (var->left_margin < 1 || var->left_margin > 255) | |
79889296 | 879 | dev_err(fbi->dev, "%s: invalid left_margin %d\n", |
1da177e4 LT |
880 | fbi->fb.fix.id, var->left_margin); |
881 | if (var->right_margin < 1 || var->right_margin > 255) | |
79889296 | 882 | dev_err(fbi->dev, "%s: invalid right_margin %d\n", |
1da177e4 LT |
883 | fbi->fb.fix.id, var->right_margin); |
884 | if (var->yres < 1 || var->yres > 1024) | |
79889296 | 885 | dev_err(fbi->dev, "%s: invalid yres %d\n", |
1da177e4 LT |
886 | fbi->fb.fix.id, var->yres); |
887 | if (var->vsync_len < 1 || var->vsync_len > 64) | |
79889296 | 888 | dev_err(fbi->dev, "%s: invalid vsync_len %d\n", |
1da177e4 LT |
889 | fbi->fb.fix.id, var->vsync_len); |
890 | if (var->upper_margin < 0 || var->upper_margin > 255) | |
79889296 | 891 | dev_err(fbi->dev, "%s: invalid upper_margin %d\n", |
1da177e4 LT |
892 | fbi->fb.fix.id, var->upper_margin); |
893 | if (var->lower_margin < 0 || var->lower_margin > 255) | |
79889296 | 894 | dev_err(fbi->dev, "%s: invalid lower_margin %d\n", |
1da177e4 LT |
895 | fbi->fb.fix.id, var->lower_margin); |
896 | #endif | |
897 | ||
898 | new_regs.lccr0 = fbi->lccr0 | | |
899 | LCCR0_LEN | LCCR0_LDM | LCCR0_BAM | | |
900 | LCCR0_ERM | LCCR0_LtlEnd | LCCR0_DMADel(0); | |
901 | ||
902 | new_regs.lccr1 = | |
903 | LCCR1_DisWdth(var->xres) + | |
904 | LCCR1_HorSnchWdth(var->hsync_len) + | |
905 | LCCR1_BegLnDel(var->left_margin) + | |
906 | LCCR1_EndLnDel(var->right_margin); | |
907 | ||
908 | /* | |
909 | * If we have a dual scan LCD, then we need to halve | |
910 | * the YRES parameter. | |
911 | */ | |
912 | yres = var->yres; | |
913 | if (fbi->lccr0 & LCCR0_Dual) | |
914 | yres /= 2; | |
915 | ||
916 | new_regs.lccr2 = | |
917 | LCCR2_DisHght(yres) + | |
918 | LCCR2_VrtSnchWdth(var->vsync_len) + | |
919 | LCCR2_BegFrmDel(var->upper_margin) + | |
920 | LCCR2_EndFrmDel(var->lower_margin); | |
921 | ||
922 | pcd = get_pcd(var->pixclock, cpufreq_get(0)); | |
923 | new_regs.lccr3 = LCCR3_PixClkDiv(pcd) | fbi->lccr3 | | |
924 | (var->sync & FB_SYNC_HOR_HIGH_ACT ? LCCR3_HorSnchH : LCCR3_HorSnchL) | | |
925 | (var->sync & FB_SYNC_VERT_HIGH_ACT ? LCCR3_VrtSnchH : LCCR3_VrtSnchL); | |
926 | ||
79889296 RK |
927 | dev_dbg(fbi->dev, "nlccr0 = 0x%08lx\n", new_regs.lccr0); |
928 | dev_dbg(fbi->dev, "nlccr1 = 0x%08lx\n", new_regs.lccr1); | |
929 | dev_dbg(fbi->dev, "nlccr2 = 0x%08lx\n", new_regs.lccr2); | |
930 | dev_dbg(fbi->dev, "nlccr3 = 0x%08lx\n", new_regs.lccr3); | |
1da177e4 LT |
931 | |
932 | half_screen_size = var->bits_per_pixel; | |
933 | half_screen_size = half_screen_size * var->xres * var->yres / 16; | |
934 | ||
935 | /* Update shadow copy atomically */ | |
936 | local_irq_save(flags); | |
937 | fbi->dbar1 = fbi->palette_dma; | |
938 | fbi->dbar2 = fbi->screen_dma + half_screen_size; | |
939 | ||
940 | fbi->reg_lccr0 = new_regs.lccr0; | |
941 | fbi->reg_lccr1 = new_regs.lccr1; | |
942 | fbi->reg_lccr2 = new_regs.lccr2; | |
943 | fbi->reg_lccr3 = new_regs.lccr3; | |
944 | local_irq_restore(flags); | |
945 | ||
946 | /* | |
947 | * Only update the registers if the controller is enabled | |
948 | * and something has changed. | |
949 | */ | |
950 | if ((LCCR0 != fbi->reg_lccr0) || (LCCR1 != fbi->reg_lccr1) || | |
951 | (LCCR2 != fbi->reg_lccr2) || (LCCR3 != fbi->reg_lccr3) || | |
952 | (DBAR1 != fbi->dbar1) || (DBAR2 != fbi->dbar2)) | |
953 | sa1100fb_schedule_work(fbi, C_REENABLE); | |
954 | ||
955 | return 0; | |
956 | } | |
957 | ||
958 | /* | |
959 | * NOTE! The following functions are purely helpers for set_ctrlr_state. | |
960 | * Do not call them directly; set_ctrlr_state does the correct serialisation | |
961 | * to ensure that things happen in the right way 100% of time time. | |
962 | * -- rmk | |
963 | */ | |
964 | static inline void __sa1100fb_backlight_power(struct sa1100fb_info *fbi, int on) | |
965 | { | |
79889296 | 966 | dev_dbg(fbi->dev, "backlight o%s\n", on ? "n" : "ff"); |
1da177e4 LT |
967 | |
968 | if (sa1100fb_backlight_power) | |
969 | sa1100fb_backlight_power(on); | |
970 | } | |
971 | ||
972 | static inline void __sa1100fb_lcd_power(struct sa1100fb_info *fbi, int on) | |
973 | { | |
79889296 | 974 | dev_dbg(fbi->dev, "LCD power o%s\n", on ? "n" : "ff"); |
1da177e4 LT |
975 | |
976 | if (sa1100fb_lcd_power) | |
977 | sa1100fb_lcd_power(on); | |
978 | } | |
979 | ||
980 | static void sa1100fb_setup_gpio(struct sa1100fb_info *fbi) | |
981 | { | |
982 | u_int mask = 0; | |
983 | ||
984 | /* | |
985 | * Enable GPIO<9:2> for LCD use if: | |
986 | * 1. Active display, or | |
987 | * 2. Color Dual Passive display | |
988 | * | |
989 | * see table 11.8 on page 11-27 in the SA1100 manual | |
990 | * -- Erik. | |
991 | * | |
992 | * SA1110 spec update nr. 25 says we can and should | |
993 | * clear LDD15 to 12 for 4 or 8bpp modes with active | |
994 | * panels. | |
995 | */ | |
996 | if ((fbi->reg_lccr0 & LCCR0_CMS) == LCCR0_Color && | |
997 | (fbi->reg_lccr0 & (LCCR0_Dual|LCCR0_Act)) != 0) { | |
998 | mask = GPIO_LDD11 | GPIO_LDD10 | GPIO_LDD9 | GPIO_LDD8; | |
999 | ||
1000 | if (fbi->fb.var.bits_per_pixel > 8 || | |
1001 | (fbi->reg_lccr0 & (LCCR0_Dual|LCCR0_Act)) == LCCR0_Dual) | |
1002 | mask |= GPIO_LDD15 | GPIO_LDD14 | GPIO_LDD13 | GPIO_LDD12; | |
1003 | ||
1004 | } | |
1005 | ||
1006 | if (mask) { | |
1007 | GPDR |= mask; | |
1008 | GAFR |= mask; | |
1009 | } | |
1010 | } | |
1011 | ||
1012 | static void sa1100fb_enable_controller(struct sa1100fb_info *fbi) | |
1013 | { | |
79889296 | 1014 | dev_dbg(fbi->dev, "Enabling LCD controller\n"); |
1da177e4 LT |
1015 | |
1016 | /* | |
1017 | * Make sure the mode bits are present in the first palette entry | |
1018 | */ | |
1019 | fbi->palette_cpu[0] &= 0xcfff; | |
1020 | fbi->palette_cpu[0] |= palette_pbs(&fbi->fb.var); | |
1021 | ||
1022 | /* Sequence from 11.7.10 */ | |
1023 | LCCR3 = fbi->reg_lccr3; | |
1024 | LCCR2 = fbi->reg_lccr2; | |
1025 | LCCR1 = fbi->reg_lccr1; | |
1026 | LCCR0 = fbi->reg_lccr0 & ~LCCR0_LEN; | |
1027 | DBAR1 = fbi->dbar1; | |
1028 | DBAR2 = fbi->dbar2; | |
1029 | LCCR0 |= LCCR0_LEN; | |
1030 | ||
1031 | if (machine_is_shannon()) { | |
1032 | GPDR |= SHANNON_GPIO_DISP_EN; | |
1033 | GPSR |= SHANNON_GPIO_DISP_EN; | |
1034 | } | |
1035 | ||
79889296 RK |
1036 | dev_dbg(fbi->dev, "DBAR1 = 0x%08lx\n", DBAR1); |
1037 | dev_dbg(fbi->dev, "DBAR2 = 0x%08lx\n", DBAR2); | |
1038 | dev_dbg(fbi->dev, "LCCR0 = 0x%08lx\n", LCCR0); | |
1039 | dev_dbg(fbi->dev, "LCCR1 = 0x%08lx\n", LCCR1); | |
1040 | dev_dbg(fbi->dev, "LCCR2 = 0x%08lx\n", LCCR2); | |
1041 | dev_dbg(fbi->dev, "LCCR3 = 0x%08lx\n", LCCR3); | |
1da177e4 LT |
1042 | } |
1043 | ||
1044 | static void sa1100fb_disable_controller(struct sa1100fb_info *fbi) | |
1045 | { | |
1046 | DECLARE_WAITQUEUE(wait, current); | |
1047 | ||
79889296 | 1048 | dev_dbg(fbi->dev, "Disabling LCD controller\n"); |
1da177e4 LT |
1049 | |
1050 | if (machine_is_shannon()) { | |
1051 | GPCR |= SHANNON_GPIO_DISP_EN; | |
1052 | } | |
1053 | ||
1054 | set_current_state(TASK_UNINTERRUPTIBLE); | |
1055 | add_wait_queue(&fbi->ctrlr_wait, &wait); | |
1056 | ||
1057 | LCSR = 0xffffffff; /* Clear LCD Status Register */ | |
1058 | LCCR0 &= ~LCCR0_LDM; /* Enable LCD Disable Done Interrupt */ | |
1059 | LCCR0 &= ~LCCR0_LEN; /* Disable LCD Controller */ | |
1060 | ||
1061 | schedule_timeout(20 * HZ / 1000); | |
1062 | remove_wait_queue(&fbi->ctrlr_wait, &wait); | |
1063 | } | |
1064 | ||
1065 | /* | |
1066 | * sa1100fb_handle_irq: Handle 'LCD DONE' interrupts. | |
1067 | */ | |
7d12e780 | 1068 | static irqreturn_t sa1100fb_handle_irq(int irq, void *dev_id) |
1da177e4 LT |
1069 | { |
1070 | struct sa1100fb_info *fbi = dev_id; | |
1071 | unsigned int lcsr = LCSR; | |
1072 | ||
1073 | if (lcsr & LCSR_LDD) { | |
1074 | LCCR0 |= LCCR0_LDM; | |
1075 | wake_up(&fbi->ctrlr_wait); | |
1076 | } | |
1077 | ||
1078 | LCSR = lcsr; | |
1079 | return IRQ_HANDLED; | |
1080 | } | |
1081 | ||
1082 | /* | |
1083 | * This function must be called from task context only, since it will | |
1084 | * sleep when disabling the LCD controller, or if we get two contending | |
1085 | * processes trying to alter state. | |
1086 | */ | |
1087 | static void set_ctrlr_state(struct sa1100fb_info *fbi, u_int state) | |
1088 | { | |
1089 | u_int old_state; | |
1090 | ||
7951ac91 | 1091 | mutex_lock(&fbi->ctrlr_lock); |
1da177e4 LT |
1092 | |
1093 | old_state = fbi->state; | |
1094 | ||
1095 | /* | |
1096 | * Hack around fbcon initialisation. | |
1097 | */ | |
1098 | if (old_state == C_STARTUP && state == C_REENABLE) | |
1099 | state = C_ENABLE; | |
1100 | ||
1101 | switch (state) { | |
1102 | case C_DISABLE_CLKCHANGE: | |
1103 | /* | |
1104 | * Disable controller for clock change. If the | |
1105 | * controller is already disabled, then do nothing. | |
1106 | */ | |
1107 | if (old_state != C_DISABLE && old_state != C_DISABLE_PM) { | |
1108 | fbi->state = state; | |
1109 | sa1100fb_disable_controller(fbi); | |
1110 | } | |
1111 | break; | |
1112 | ||
1113 | case C_DISABLE_PM: | |
1114 | case C_DISABLE: | |
1115 | /* | |
1116 | * Disable controller | |
1117 | */ | |
1118 | if (old_state != C_DISABLE) { | |
1119 | fbi->state = state; | |
1120 | ||
1121 | __sa1100fb_backlight_power(fbi, 0); | |
1122 | if (old_state != C_DISABLE_CLKCHANGE) | |
1123 | sa1100fb_disable_controller(fbi); | |
1124 | __sa1100fb_lcd_power(fbi, 0); | |
1125 | } | |
1126 | break; | |
1127 | ||
1128 | case C_ENABLE_CLKCHANGE: | |
1129 | /* | |
1130 | * Enable the controller after clock change. Only | |
1131 | * do this if we were disabled for the clock change. | |
1132 | */ | |
1133 | if (old_state == C_DISABLE_CLKCHANGE) { | |
1134 | fbi->state = C_ENABLE; | |
1135 | sa1100fb_enable_controller(fbi); | |
1136 | } | |
1137 | break; | |
1138 | ||
1139 | case C_REENABLE: | |
1140 | /* | |
1141 | * Re-enable the controller only if it was already | |
1142 | * enabled. This is so we reprogram the control | |
1143 | * registers. | |
1144 | */ | |
1145 | if (old_state == C_ENABLE) { | |
1146 | sa1100fb_disable_controller(fbi); | |
1147 | sa1100fb_setup_gpio(fbi); | |
1148 | sa1100fb_enable_controller(fbi); | |
1149 | } | |
1150 | break; | |
1151 | ||
1152 | case C_ENABLE_PM: | |
1153 | /* | |
1154 | * Re-enable the controller after PM. This is not | |
1155 | * perfect - think about the case where we were doing | |
1156 | * a clock change, and we suspended half-way through. | |
1157 | */ | |
1158 | if (old_state != C_DISABLE_PM) | |
1159 | break; | |
1160 | /* fall through */ | |
1161 | ||
1162 | case C_ENABLE: | |
1163 | /* | |
1164 | * Power up the LCD screen, enable controller, and | |
1165 | * turn on the backlight. | |
1166 | */ | |
1167 | if (old_state != C_ENABLE) { | |
1168 | fbi->state = C_ENABLE; | |
1169 | sa1100fb_setup_gpio(fbi); | |
1170 | __sa1100fb_lcd_power(fbi, 1); | |
1171 | sa1100fb_enable_controller(fbi); | |
1172 | __sa1100fb_backlight_power(fbi, 1); | |
1173 | } | |
1174 | break; | |
1175 | } | |
7951ac91 | 1176 | mutex_unlock(&fbi->ctrlr_lock); |
1da177e4 LT |
1177 | } |
1178 | ||
1179 | /* | |
1180 | * Our LCD controller task (which is called when we blank or unblank) | |
1181 | * via keventd. | |
1182 | */ | |
2343217f | 1183 | static void sa1100fb_task(struct work_struct *w) |
1da177e4 | 1184 | { |
2343217f | 1185 | struct sa1100fb_info *fbi = container_of(w, struct sa1100fb_info, task); |
1da177e4 LT |
1186 | u_int state = xchg(&fbi->task_state, -1); |
1187 | ||
1188 | set_ctrlr_state(fbi, state); | |
1189 | } | |
1190 | ||
1191 | #ifdef CONFIG_CPU_FREQ | |
1192 | /* | |
1193 | * Calculate the minimum DMA period over all displays that we own. | |
1194 | * This, together with the SDRAM bandwidth defines the slowest CPU | |
1195 | * frequency that can be selected. | |
1196 | */ | |
1197 | static unsigned int sa1100fb_min_dma_period(struct sa1100fb_info *fbi) | |
1198 | { | |
1199 | #if 0 | |
1200 | unsigned int min_period = (unsigned int)-1; | |
1201 | int i; | |
1202 | ||
1203 | for (i = 0; i < MAX_NR_CONSOLES; i++) { | |
1204 | struct display *disp = &fb_display[i]; | |
1205 | unsigned int period; | |
1206 | ||
1207 | /* | |
1208 | * Do we own this display? | |
1209 | */ | |
1210 | if (disp->fb_info != &fbi->fb) | |
1211 | continue; | |
1212 | ||
1213 | /* | |
1214 | * Ok, calculate its DMA period | |
1215 | */ | |
1216 | period = sa1100fb_display_dma_period(&disp->var); | |
1217 | if (period < min_period) | |
1218 | min_period = period; | |
1219 | } | |
1220 | ||
1221 | return min_period; | |
1222 | #else | |
1223 | /* | |
1224 | * FIXME: we need to verify _all_ consoles. | |
1225 | */ | |
1226 | return sa1100fb_display_dma_period(&fbi->fb.var); | |
1227 | #endif | |
1228 | } | |
1229 | ||
1230 | /* | |
1231 | * CPU clock speed change handler. We need to adjust the LCD timing | |
1232 | * parameters when the CPU clock is adjusted by the power management | |
1233 | * subsystem. | |
1234 | */ | |
1235 | static int | |
1236 | sa1100fb_freq_transition(struct notifier_block *nb, unsigned long val, | |
1237 | void *data) | |
1238 | { | |
1239 | struct sa1100fb_info *fbi = TO_INF(nb, freq_transition); | |
1240 | struct cpufreq_freqs *f = data; | |
1241 | u_int pcd; | |
1242 | ||
1243 | switch (val) { | |
1244 | case CPUFREQ_PRECHANGE: | |
1245 | set_ctrlr_state(fbi, C_DISABLE_CLKCHANGE); | |
1246 | break; | |
1247 | ||
1248 | case CPUFREQ_POSTCHANGE: | |
1249 | pcd = get_pcd(fbi->fb.var.pixclock, f->new); | |
1250 | fbi->reg_lccr3 = (fbi->reg_lccr3 & ~0xff) | LCCR3_PixClkDiv(pcd); | |
1251 | set_ctrlr_state(fbi, C_ENABLE_CLKCHANGE); | |
1252 | break; | |
1253 | } | |
1254 | return 0; | |
1255 | } | |
1256 | ||
1257 | static int | |
1258 | sa1100fb_freq_policy(struct notifier_block *nb, unsigned long val, | |
1259 | void *data) | |
1260 | { | |
1261 | struct sa1100fb_info *fbi = TO_INF(nb, freq_policy); | |
1262 | struct cpufreq_policy *policy = data; | |
1263 | ||
1264 | switch (val) { | |
1265 | case CPUFREQ_ADJUST: | |
1266 | case CPUFREQ_INCOMPATIBLE: | |
79889296 | 1267 | dev_dbg(fbi->dev, "min dma period: %d ps, " |
1da177e4 LT |
1268 | "new clock %d kHz\n", sa1100fb_min_dma_period(fbi), |
1269 | policy->max); | |
1270 | /* todo: fill in min/max values */ | |
1271 | break; | |
1272 | case CPUFREQ_NOTIFY: | |
1273 | do {} while(0); | |
1274 | /* todo: panic if min/max values aren't fulfilled | |
1275 | * [can't really happen unless there's a bug in the | |
1276 | * CPU policy verififcation process * | |
1277 | */ | |
1278 | break; | |
1279 | } | |
1280 | return 0; | |
1281 | } | |
1282 | #endif | |
1283 | ||
1284 | #ifdef CONFIG_PM | |
1285 | /* | |
1286 | * Power management hooks. Note that we won't be called from IRQ context, | |
1287 | * unlike the blank functions above, so we may sleep. | |
1288 | */ | |
3ae5eaec | 1289 | static int sa1100fb_suspend(struct platform_device *dev, pm_message_t state) |
1da177e4 | 1290 | { |
3ae5eaec | 1291 | struct sa1100fb_info *fbi = platform_get_drvdata(dev); |
1da177e4 | 1292 | |
9480e307 | 1293 | set_ctrlr_state(fbi, C_DISABLE_PM); |
1da177e4 LT |
1294 | return 0; |
1295 | } | |
1296 | ||
3ae5eaec | 1297 | static int sa1100fb_resume(struct platform_device *dev) |
1da177e4 | 1298 | { |
3ae5eaec | 1299 | struct sa1100fb_info *fbi = platform_get_drvdata(dev); |
1da177e4 | 1300 | |
9480e307 | 1301 | set_ctrlr_state(fbi, C_ENABLE_PM); |
1da177e4 LT |
1302 | return 0; |
1303 | } | |
1304 | #else | |
1305 | #define sa1100fb_suspend NULL | |
1306 | #define sa1100fb_resume NULL | |
1307 | #endif | |
1308 | ||
1309 | /* | |
1310 | * sa1100fb_map_video_memory(): | |
1311 | * Allocates the DRAM memory for the frame buffer. This buffer is | |
1312 | * remapped into a non-cached, non-buffered, memory region to | |
1313 | * allow palette and pixel writes to occur without flushing the | |
1314 | * cache. Once this area is remapped, all virtual memory | |
1315 | * access to the video memory should occur at the new region. | |
1316 | */ | |
66564d83 | 1317 | static int __devinit sa1100fb_map_video_memory(struct sa1100fb_info *fbi) |
1da177e4 LT |
1318 | { |
1319 | /* | |
1320 | * We reserve one page for the palette, plus the size | |
1321 | * of the framebuffer. | |
1322 | */ | |
1323 | fbi->map_size = PAGE_ALIGN(fbi->fb.fix.smem_len + PAGE_SIZE); | |
1324 | fbi->map_cpu = dma_alloc_writecombine(fbi->dev, fbi->map_size, | |
1325 | &fbi->map_dma, GFP_KERNEL); | |
1326 | ||
1327 | if (fbi->map_cpu) { | |
1328 | fbi->fb.screen_base = fbi->map_cpu + PAGE_SIZE; | |
1329 | fbi->screen_dma = fbi->map_dma + PAGE_SIZE; | |
1330 | /* | |
1331 | * FIXME: this is actually the wrong thing to place in | |
1332 | * smem_start. But fbdev suffers from the problem that | |
1333 | * it needs an API which doesn't exist (in this case, | |
1334 | * dma_writecombine_mmap) | |
1335 | */ | |
1336 | fbi->fb.fix.smem_start = fbi->screen_dma; | |
1337 | } | |
1338 | ||
1339 | return fbi->map_cpu ? 0 : -ENOMEM; | |
1340 | } | |
1341 | ||
1342 | /* Fake monspecs to fill in fbinfo structure */ | |
66564d83 | 1343 | static struct fb_monspecs monspecs __devinitdata = { |
1da177e4 LT |
1344 | .hfmin = 30000, |
1345 | .hfmax = 70000, | |
1346 | .vfmin = 50, | |
1347 | .vfmax = 65, | |
1348 | }; | |
1349 | ||
1350 | ||
66564d83 | 1351 | static struct sa1100fb_info * __devinit sa1100fb_init_fbinfo(struct device *dev) |
1da177e4 LT |
1352 | { |
1353 | struct sa1100fb_mach_info *inf; | |
1354 | struct sa1100fb_info *fbi; | |
1355 | ||
1356 | fbi = kmalloc(sizeof(struct sa1100fb_info) + sizeof(u32) * 16, | |
1357 | GFP_KERNEL); | |
1358 | if (!fbi) | |
1359 | return NULL; | |
1360 | ||
1361 | memset(fbi, 0, sizeof(struct sa1100fb_info)); | |
1362 | fbi->dev = dev; | |
1363 | ||
1364 | strcpy(fbi->fb.fix.id, SA1100_NAME); | |
1365 | ||
1366 | fbi->fb.fix.type = FB_TYPE_PACKED_PIXELS; | |
1367 | fbi->fb.fix.type_aux = 0; | |
1368 | fbi->fb.fix.xpanstep = 0; | |
1369 | fbi->fb.fix.ypanstep = 0; | |
1370 | fbi->fb.fix.ywrapstep = 0; | |
1371 | fbi->fb.fix.accel = FB_ACCEL_NONE; | |
1372 | ||
1373 | fbi->fb.var.nonstd = 0; | |
1374 | fbi->fb.var.activate = FB_ACTIVATE_NOW; | |
1375 | fbi->fb.var.height = -1; | |
1376 | fbi->fb.var.width = -1; | |
1377 | fbi->fb.var.accel_flags = 0; | |
1378 | fbi->fb.var.vmode = FB_VMODE_NONINTERLACED; | |
1379 | ||
1380 | fbi->fb.fbops = &sa1100fb_ops; | |
1381 | fbi->fb.flags = FBINFO_DEFAULT; | |
1382 | fbi->fb.monspecs = monspecs; | |
1383 | fbi->fb.pseudo_palette = (fbi + 1); | |
1384 | ||
0a453480 | 1385 | fbi->rgb[RGB_4] = &rgb_4; |
1da177e4 LT |
1386 | fbi->rgb[RGB_8] = &rgb_8; |
1387 | fbi->rgb[RGB_16] = &def_rgb_16; | |
1388 | ||
1389 | inf = sa1100fb_get_machine_info(fbi); | |
1390 | ||
1391 | /* | |
1392 | * People just don't seem to get this. We don't support | |
1393 | * anything but correct entries now, so panic if someone | |
1394 | * does something stupid. | |
1395 | */ | |
1396 | if (inf->lccr3 & (LCCR3_VrtSnchL|LCCR3_HorSnchL|0xff) || | |
1397 | inf->pixclock == 0) | |
1398 | panic("sa1100fb error: invalid LCCR3 fields set or zero " | |
1399 | "pixclock."); | |
1400 | ||
1401 | fbi->max_xres = inf->xres; | |
1402 | fbi->fb.var.xres = inf->xres; | |
1403 | fbi->fb.var.xres_virtual = inf->xres; | |
1404 | fbi->max_yres = inf->yres; | |
1405 | fbi->fb.var.yres = inf->yres; | |
1406 | fbi->fb.var.yres_virtual = inf->yres; | |
1407 | fbi->max_bpp = inf->bpp; | |
1408 | fbi->fb.var.bits_per_pixel = inf->bpp; | |
1409 | fbi->fb.var.pixclock = inf->pixclock; | |
1410 | fbi->fb.var.hsync_len = inf->hsync_len; | |
1411 | fbi->fb.var.left_margin = inf->left_margin; | |
1412 | fbi->fb.var.right_margin = inf->right_margin; | |
1413 | fbi->fb.var.vsync_len = inf->vsync_len; | |
1414 | fbi->fb.var.upper_margin = inf->upper_margin; | |
1415 | fbi->fb.var.lower_margin = inf->lower_margin; | |
1416 | fbi->fb.var.sync = inf->sync; | |
1417 | fbi->fb.var.grayscale = inf->cmap_greyscale; | |
1418 | fbi->cmap_inverse = inf->cmap_inverse; | |
1419 | fbi->cmap_static = inf->cmap_static; | |
1420 | fbi->lccr0 = inf->lccr0; | |
1421 | fbi->lccr3 = inf->lccr3; | |
1422 | fbi->state = C_STARTUP; | |
1423 | fbi->task_state = (u_char)-1; | |
1424 | fbi->fb.fix.smem_len = fbi->max_xres * fbi->max_yres * | |
1425 | fbi->max_bpp / 8; | |
1426 | ||
1427 | init_waitqueue_head(&fbi->ctrlr_wait); | |
2343217f | 1428 | INIT_WORK(&fbi->task, sa1100fb_task); |
7951ac91 | 1429 | mutex_init(&fbi->ctrlr_lock); |
1da177e4 LT |
1430 | |
1431 | return fbi; | |
1432 | } | |
1433 | ||
c2e13037 | 1434 | static int __devinit sa1100fb_probe(struct platform_device *pdev) |
1da177e4 LT |
1435 | { |
1436 | struct sa1100fb_info *fbi; | |
e9368f82 RK |
1437 | int ret, irq; |
1438 | ||
1439 | irq = platform_get_irq(pdev, 0); | |
48944738 | 1440 | if (irq < 0) |
e9368f82 | 1441 | return -EINVAL; |
1da177e4 LT |
1442 | |
1443 | if (!request_mem_region(0xb0100000, 0x10000, "LCD")) | |
1444 | return -EBUSY; | |
1445 | ||
3ae5eaec | 1446 | fbi = sa1100fb_init_fbinfo(&pdev->dev); |
1da177e4 LT |
1447 | ret = -ENOMEM; |
1448 | if (!fbi) | |
1449 | goto failed; | |
1450 | ||
1451 | /* Initialize video memory */ | |
1452 | ret = sa1100fb_map_video_memory(fbi); | |
1453 | if (ret) | |
1454 | goto failed; | |
1455 | ||
f8798ccb | 1456 | ret = request_irq(irq, sa1100fb_handle_irq, 0, "LCD", fbi); |
1da177e4 | 1457 | if (ret) { |
79889296 | 1458 | dev_err(&pdev->dev, "request_irq failed: %d\n", ret); |
1da177e4 LT |
1459 | goto failed; |
1460 | } | |
1461 | ||
1462 | #ifdef ASSABET_PAL_VIDEO | |
1463 | if (machine_is_assabet()) | |
1464 | ASSABET_BCR_clear(ASSABET_BCR_LCD_ON); | |
1465 | #endif | |
1466 | ||
1467 | /* | |
1468 | * This makes sure that our colour bitfield | |
1469 | * descriptors are correctly initialised. | |
1470 | */ | |
1471 | sa1100fb_check_var(&fbi->fb.var, &fbi->fb); | |
1472 | ||
3ae5eaec | 1473 | platform_set_drvdata(pdev, fbi); |
1da177e4 LT |
1474 | |
1475 | ret = register_framebuffer(&fbi->fb); | |
1476 | if (ret < 0) | |
e9368f82 | 1477 | goto err_free_irq; |
1da177e4 LT |
1478 | |
1479 | #ifdef CONFIG_CPU_FREQ | |
1480 | fbi->freq_transition.notifier_call = sa1100fb_freq_transition; | |
1481 | fbi->freq_policy.notifier_call = sa1100fb_freq_policy; | |
1482 | cpufreq_register_notifier(&fbi->freq_transition, CPUFREQ_TRANSITION_NOTIFIER); | |
1483 | cpufreq_register_notifier(&fbi->freq_policy, CPUFREQ_POLICY_NOTIFIER); | |
1484 | #endif | |
1485 | ||
1486 | /* This driver cannot be unloaded at the moment */ | |
1487 | return 0; | |
1488 | ||
e9368f82 RK |
1489 | err_free_irq: |
1490 | free_irq(irq, fbi); | |
1491 | failed: | |
3ae5eaec | 1492 | platform_set_drvdata(pdev, NULL); |
1da177e4 LT |
1493 | kfree(fbi); |
1494 | release_mem_region(0xb0100000, 0x10000); | |
1495 | return ret; | |
1496 | } | |
1497 | ||
3ae5eaec | 1498 | static struct platform_driver sa1100fb_driver = { |
1da177e4 LT |
1499 | .probe = sa1100fb_probe, |
1500 | .suspend = sa1100fb_suspend, | |
1501 | .resume = sa1100fb_resume, | |
3ae5eaec RK |
1502 | .driver = { |
1503 | .name = "sa11x0-fb", | |
4f7e34f8 | 1504 | .owner = THIS_MODULE, |
3ae5eaec | 1505 | }, |
1da177e4 LT |
1506 | }; |
1507 | ||
1508 | int __init sa1100fb_init(void) | |
1509 | { | |
1510 | if (fb_get_options("sa1100fb", NULL)) | |
1511 | return -ENODEV; | |
1512 | ||
3ae5eaec | 1513 | return platform_driver_register(&sa1100fb_driver); |
1da177e4 LT |
1514 | } |
1515 | ||
1516 | int __init sa1100fb_setup(char *options) | |
1517 | { | |
1518 | #if 0 | |
1519 | char *this_opt; | |
1520 | ||
1521 | if (!options || !*options) | |
1522 | return 0; | |
1523 | ||
1524 | while ((this_opt = strsep(&options, ",")) != NULL) { | |
1525 | ||
1526 | if (!strncmp(this_opt, "bpp:", 4)) | |
1527 | current_par.max_bpp = | |
1528 | simple_strtoul(this_opt + 4, NULL, 0); | |
1529 | ||
1530 | if (!strncmp(this_opt, "lccr0:", 6)) | |
1531 | lcd_shadow.lccr0 = | |
1532 | simple_strtoul(this_opt + 6, NULL, 0); | |
1533 | if (!strncmp(this_opt, "lccr1:", 6)) { | |
1534 | lcd_shadow.lccr1 = | |
1535 | simple_strtoul(this_opt + 6, NULL, 0); | |
1536 | current_par.max_xres = | |
1537 | (lcd_shadow.lccr1 & 0x3ff) + 16; | |
1538 | } | |
1539 | if (!strncmp(this_opt, "lccr2:", 6)) { | |
1540 | lcd_shadow.lccr2 = | |
1541 | simple_strtoul(this_opt + 6, NULL, 0); | |
1542 | current_par.max_yres = | |
1543 | (lcd_shadow. | |
1544 | lccr0 & LCCR0_SDS) ? ((lcd_shadow. | |
1545 | lccr2 & 0x3ff) + | |
1546 | 1) * | |
1547 | 2 : ((lcd_shadow.lccr2 & 0x3ff) + 1); | |
1548 | } | |
1549 | if (!strncmp(this_opt, "lccr3:", 6)) | |
1550 | lcd_shadow.lccr3 = | |
1551 | simple_strtoul(this_opt + 6, NULL, 0); | |
1552 | } | |
1553 | #endif | |
1554 | return 0; | |
1555 | } | |
1556 | ||
1557 | module_init(sa1100fb_init); | |
1558 | MODULE_DESCRIPTION("StrongARM-1100/1110 framebuffer driver"); | |
1559 | MODULE_LICENSE("GPL"); |