]>
Commit | Line | Data |
---|---|---|
5fc404e4 BD |
1 | /* linux/drivers/video/sm501fb.c |
2 | * | |
3 | * Copyright (c) 2006 Simtec Electronics | |
4 | * Vincent Sanders <vince@simtec.co.uk> | |
5 | * Ben Dooks <ben@simtec.co.uk> | |
6 | * | |
7 | * This program is free software; you can redistribute it and/or modify | |
8 | * it under the terms of the GNU General Public License version 2 as | |
9 | * published by the Free Software Foundation. | |
10 | * | |
11 | * Framebuffer driver for the Silicon Motion SM501 | |
12 | */ | |
13 | ||
14 | #include <linux/module.h> | |
15 | #include <linux/kernel.h> | |
16 | #include <linux/errno.h> | |
17 | #include <linux/string.h> | |
18 | #include <linux/mm.h> | |
19 | #include <linux/tty.h> | |
20 | #include <linux/slab.h> | |
21 | #include <linux/delay.h> | |
22 | #include <linux/fb.h> | |
23 | #include <linux/init.h> | |
24 | #include <linux/vmalloc.h> | |
25 | #include <linux/dma-mapping.h> | |
26 | #include <linux/interrupt.h> | |
27 | #include <linux/workqueue.h> | |
28 | #include <linux/wait.h> | |
29 | #include <linux/platform_device.h> | |
30 | #include <linux/clk.h> | |
f22e521f | 31 | #include <linux/console.h> |
5fc404e4 BD |
32 | |
33 | #include <asm/io.h> | |
34 | #include <asm/uaccess.h> | |
35 | #include <asm/div64.h> | |
36 | ||
37 | #ifdef CONFIG_PM | |
38 | #include <linux/pm.h> | |
39 | #endif | |
40 | ||
41 | #include <linux/sm501.h> | |
42 | #include <linux/sm501-regs.h> | |
43 | ||
44 | #define NR_PALETTE 256 | |
45 | ||
46 | enum sm501_controller { | |
47 | HEAD_CRT = 0, | |
48 | HEAD_PANEL = 1, | |
49 | }; | |
50 | ||
44363f14 | 51 | /* SM501 memory address */ |
5fc404e4 BD |
52 | struct sm501_mem { |
53 | unsigned long size; | |
54 | unsigned long sm_addr; | |
55 | void __iomem *k_addr; | |
56 | }; | |
57 | ||
58 | /* private data that is shared between all frambuffers* */ | |
59 | struct sm501fb_info { | |
60 | struct device *dev; | |
61 | struct fb_info *fb[2]; /* fb info for both heads */ | |
62 | struct resource *fbmem_res; /* framebuffer resource */ | |
63 | struct resource *regs_res; /* registers resource */ | |
64 | struct sm501_platdata_fb *pdata; /* our platform data */ | |
65 | ||
c1f303bb BD |
66 | unsigned long pm_crt_ctrl; /* pm: crt ctrl save */ |
67 | ||
5fc404e4 BD |
68 | int irq; |
69 | int swap_endian; /* set to swap rgb=>bgr */ | |
70 | void __iomem *regs; /* remapped registers */ | |
71 | void __iomem *fbmem; /* remapped framebuffer */ | |
72 | size_t fbmem_len; /* length of remapped region */ | |
73 | }; | |
74 | ||
75 | /* per-framebuffer private data */ | |
76 | struct sm501fb_par { | |
77 | u32 pseudo_palette[16]; | |
78 | ||
79 | enum sm501_controller head; | |
80 | struct sm501_mem cursor; | |
81 | struct sm501_mem screen; | |
82 | struct fb_ops ops; | |
83 | ||
84 | void *store_fb; | |
85 | void *store_cursor; | |
86 | void __iomem *cursor_regs; | |
87 | struct sm501fb_info *info; | |
88 | }; | |
89 | ||
90 | /* Helper functions */ | |
91 | ||
92 | static inline int h_total(struct fb_var_screeninfo *var) | |
93 | { | |
94 | return var->xres + var->left_margin + | |
95 | var->right_margin + var->hsync_len; | |
96 | } | |
97 | ||
98 | static inline int v_total(struct fb_var_screeninfo *var) | |
99 | { | |
100 | return var->yres + var->upper_margin + | |
101 | var->lower_margin + var->vsync_len; | |
102 | } | |
103 | ||
104 | /* sm501fb_sync_regs() | |
105 | * | |
106 | * This call is mainly for PCI bus systems where we need to | |
107 | * ensure that any writes to the bus are completed before the | |
108 | * next phase, or after completing a function. | |
109 | */ | |
110 | ||
111 | static inline void sm501fb_sync_regs(struct sm501fb_info *info) | |
112 | { | |
113 | readl(info->regs); | |
114 | } | |
115 | ||
116 | /* sm501_alloc_mem | |
117 | * | |
118 | * This is an attempt to lay out memory for the two framebuffers and | |
119 | * everything else | |
120 | * | |
121 | * |fbmem_res->start fbmem_res->end| | |
122 | * | | | |
123 | * |fb[0].fix.smem_start | |fb[1].fix.smem_start | 2K | | |
124 | * |-> fb[0].fix.smem_len <-| spare |-> fb[1].fix.smem_len <-|-> cursors <-| | |
125 | * | |
126 | * The "spare" space is for the 2d engine data | |
127 | * the fixed is space for the cursors (2x1Kbyte) | |
128 | * | |
129 | * we need to allocate memory for the 2D acceleration engine | |
130 | * command list and the data for the engine to deal with. | |
131 | * | |
132 | * - all allocations must be 128bit aligned | |
133 | * - cursors are 64x64x2 bits (1Kbyte) | |
134 | * | |
135 | */ | |
136 | ||
137 | #define SM501_MEMF_CURSOR (1) | |
138 | #define SM501_MEMF_PANEL (2) | |
139 | #define SM501_MEMF_CRT (4) | |
140 | #define SM501_MEMF_ACCEL (8) | |
141 | ||
9540f75b AB |
142 | static int sm501_alloc_mem(struct sm501fb_info *inf, struct sm501_mem *mem, |
143 | unsigned int why, size_t size) | |
5fc404e4 BD |
144 | { |
145 | unsigned int ptr = 0; | |
146 | ||
147 | switch (why) { | |
148 | case SM501_MEMF_CURSOR: | |
149 | ptr = inf->fbmem_len - size; | |
150 | inf->fbmem_len = ptr; | |
151 | break; | |
152 | ||
153 | case SM501_MEMF_PANEL: | |
154 | ptr = inf->fbmem_len - size; | |
155 | if (ptr < inf->fb[0]->fix.smem_len) | |
156 | return -ENOMEM; | |
157 | ||
158 | break; | |
159 | ||
160 | case SM501_MEMF_CRT: | |
161 | ptr = 0; | |
162 | break; | |
163 | ||
164 | case SM501_MEMF_ACCEL: | |
165 | ptr = inf->fb[0]->fix.smem_len; | |
166 | ||
167 | if ((ptr + size) > | |
168 | (inf->fb[1]->fix.smem_start - inf->fbmem_res->start)) | |
169 | return -ENOMEM; | |
170 | break; | |
171 | ||
172 | default: | |
173 | return -EINVAL; | |
174 | } | |
175 | ||
176 | mem->size = size; | |
177 | mem->sm_addr = ptr; | |
178 | mem->k_addr = inf->fbmem + ptr; | |
179 | ||
180 | dev_dbg(inf->dev, "%s: result %08lx, %p - %u, %zd\n", | |
181 | __func__, mem->sm_addr, mem->k_addr, why, size); | |
182 | ||
183 | return 0; | |
184 | } | |
185 | ||
186 | /* sm501fb_ps_to_hz | |
187 | * | |
188 | * Converts a period in picoseconds to Hz. | |
189 | * | |
190 | * Note, we try to keep this in Hz to minimise rounding with | |
191 | * the limited PLL settings on the SM501. | |
192 | */ | |
193 | ||
194 | static unsigned long sm501fb_ps_to_hz(unsigned long psvalue) | |
195 | { | |
196 | unsigned long long numerator=1000000000000ULL; | |
197 | ||
198 | /* 10^12 / picosecond period gives frequency in Hz */ | |
199 | do_div(numerator, psvalue); | |
200 | return (unsigned long)numerator; | |
201 | } | |
202 | ||
203 | /* sm501fb_hz_to_ps is identical to the oposite transform */ | |
204 | ||
205 | #define sm501fb_hz_to_ps(x) sm501fb_ps_to_hz(x) | |
206 | ||
207 | /* sm501fb_setup_gamma | |
208 | * | |
209 | * Programs a linear 1.0 gamma ramp in case the gamma | |
210 | * correction is enabled without programming anything else. | |
211 | */ | |
212 | ||
213 | static void sm501fb_setup_gamma(struct sm501fb_info *fbi, | |
214 | unsigned long palette) | |
215 | { | |
216 | unsigned long value = 0; | |
217 | int offset; | |
218 | ||
219 | /* set gamma values */ | |
220 | for (offset = 0; offset < 256 * 4; offset += 4) { | |
221 | writel(value, fbi->regs + palette + offset); | |
222 | value += 0x010101; /* Advance RGB by 1,1,1.*/ | |
223 | } | |
224 | } | |
225 | ||
226 | /* sm501fb_check_var | |
227 | * | |
228 | * check common variables for both panel and crt | |
229 | */ | |
230 | ||
231 | static int sm501fb_check_var(struct fb_var_screeninfo *var, | |
232 | struct fb_info *info) | |
233 | { | |
234 | struct sm501fb_par *par = info->par; | |
235 | struct sm501fb_info *sm = par->info; | |
236 | unsigned long tmp; | |
237 | ||
238 | /* check we can fit these values into the registers */ | |
239 | ||
240 | if (var->hsync_len > 255 || var->vsync_len > 255) | |
241 | return -EINVAL; | |
242 | ||
243 | if ((var->xres + var->right_margin) >= 4096) | |
244 | return -EINVAL; | |
245 | ||
246 | if ((var->yres + var->lower_margin) > 2048) | |
247 | return -EINVAL; | |
248 | ||
249 | /* hard limits of device */ | |
250 | ||
251 | if (h_total(var) > 4096 || v_total(var) > 2048) | |
252 | return -EINVAL; | |
253 | ||
254 | /* check our line length is going to be 128 bit aligned */ | |
255 | ||
256 | tmp = (var->xres * var->bits_per_pixel) / 8; | |
257 | if ((tmp & 15) != 0) | |
258 | return -EINVAL; | |
259 | ||
260 | /* check the virtual size */ | |
261 | ||
262 | if (var->xres_virtual > 4096 || var->yres_virtual > 2048) | |
263 | return -EINVAL; | |
264 | ||
265 | /* can cope with 8,16 or 32bpp */ | |
266 | ||
267 | if (var->bits_per_pixel <= 8) | |
268 | var->bits_per_pixel = 8; | |
269 | else if (var->bits_per_pixel <= 16) | |
270 | var->bits_per_pixel = 16; | |
271 | else if (var->bits_per_pixel == 24) | |
272 | var->bits_per_pixel = 32; | |
273 | ||
274 | /* set r/g/b positions and validate bpp */ | |
275 | switch(var->bits_per_pixel) { | |
276 | case 8: | |
277 | var->red.length = var->bits_per_pixel; | |
278 | var->red.offset = 0; | |
279 | var->green.length = var->bits_per_pixel; | |
280 | var->green.offset = 0; | |
281 | var->blue.length = var->bits_per_pixel; | |
282 | var->blue.offset = 0; | |
283 | var->transp.length = 0; | |
284 | ||
285 | break; | |
286 | ||
287 | case 16: | |
288 | if (sm->pdata->flags & SM501_FBPD_SWAP_FB_ENDIAN) { | |
289 | var->red.offset = 11; | |
290 | var->green.offset = 5; | |
291 | var->blue.offset = 0; | |
292 | } else { | |
293 | var->blue.offset = 11; | |
294 | var->green.offset = 5; | |
295 | var->red.offset = 0; | |
296 | } | |
297 | ||
298 | var->red.length = 5; | |
299 | var->green.length = 6; | |
300 | var->blue.length = 5; | |
301 | var->transp.length = 0; | |
302 | break; | |
303 | ||
304 | case 32: | |
305 | if (sm->pdata->flags & SM501_FBPD_SWAP_FB_ENDIAN) { | |
306 | var->transp.offset = 0; | |
307 | var->red.offset = 8; | |
308 | var->green.offset = 16; | |
309 | var->blue.offset = 24; | |
310 | } else { | |
311 | var->transp.offset = 24; | |
312 | var->red.offset = 16; | |
313 | var->green.offset = 8; | |
314 | var->blue.offset = 0; | |
315 | } | |
316 | ||
317 | var->red.length = 8; | |
318 | var->green.length = 8; | |
319 | var->blue.length = 8; | |
320 | var->transp.length = 0; | |
321 | break; | |
322 | ||
323 | default: | |
324 | return -EINVAL; | |
325 | } | |
326 | ||
327 | return 0; | |
328 | } | |
329 | ||
330 | /* | |
331 | * sm501fb_check_var_crt(): | |
332 | * | |
333 | * check the parameters for the CRT head, and either bring them | |
334 | * back into range, or return -EINVAL. | |
335 | */ | |
336 | ||
337 | static int sm501fb_check_var_crt(struct fb_var_screeninfo *var, | |
338 | struct fb_info *info) | |
339 | { | |
340 | return sm501fb_check_var(var, info); | |
341 | } | |
342 | ||
343 | /* sm501fb_check_var_pnl(): | |
344 | * | |
345 | * check the parameters for the CRT head, and either bring them | |
346 | * back into range, or return -EINVAL. | |
347 | */ | |
348 | ||
349 | static int sm501fb_check_var_pnl(struct fb_var_screeninfo *var, | |
350 | struct fb_info *info) | |
351 | { | |
352 | return sm501fb_check_var(var, info); | |
353 | } | |
354 | ||
355 | /* sm501fb_set_par_common | |
356 | * | |
357 | * set common registers for framebuffers | |
358 | */ | |
359 | ||
360 | static int sm501fb_set_par_common(struct fb_info *info, | |
361 | struct fb_var_screeninfo *var) | |
362 | { | |
363 | struct sm501fb_par *par = info->par; | |
364 | struct sm501fb_info *fbi = par->info; | |
365 | unsigned long pixclock; /* pixelclock in Hz */ | |
366 | unsigned long sm501pixclock; /* pixelclock the 501 can achive in Hz */ | |
367 | unsigned int mem_type; | |
368 | unsigned int clock_type; | |
369 | unsigned int head_addr; | |
370 | ||
371 | dev_dbg(fbi->dev, "%s: %dx%d, bpp = %d, virtual %dx%d\n", | |
372 | __func__, var->xres, var->yres, var->bits_per_pixel, | |
373 | var->xres_virtual, var->yres_virtual); | |
374 | ||
375 | switch (par->head) { | |
376 | case HEAD_CRT: | |
377 | mem_type = SM501_MEMF_CRT; | |
378 | clock_type = SM501_CLOCK_V2XCLK; | |
379 | head_addr = SM501_DC_CRT_FB_ADDR; | |
380 | break; | |
381 | ||
382 | case HEAD_PANEL: | |
383 | mem_type = SM501_MEMF_PANEL; | |
384 | clock_type = SM501_CLOCK_P2XCLK; | |
385 | head_addr = SM501_DC_PANEL_FB_ADDR; | |
386 | break; | |
387 | ||
388 | default: | |
389 | mem_type = 0; /* stop compiler warnings */ | |
390 | head_addr = 0; | |
391 | clock_type = 0; | |
392 | } | |
393 | ||
394 | switch (var->bits_per_pixel) { | |
395 | case 8: | |
396 | info->fix.visual = FB_VISUAL_PSEUDOCOLOR; | |
397 | break; | |
398 | ||
399 | case 16: | |
400 | info->fix.visual = FB_VISUAL_DIRECTCOLOR; | |
401 | break; | |
402 | ||
403 | case 32: | |
404 | info->fix.visual = FB_VISUAL_TRUECOLOR; | |
405 | break; | |
406 | } | |
407 | ||
408 | /* allocate fb memory within 501 */ | |
409 | info->fix.line_length = (var->xres_virtual * var->bits_per_pixel)/8; | |
410 | info->fix.smem_len = info->fix.line_length * var->yres_virtual; | |
411 | ||
412 | dev_dbg(fbi->dev, "%s: line length = %u\n", __func__, | |
413 | info->fix.line_length); | |
414 | ||
415 | if (sm501_alloc_mem(fbi, &par->screen, mem_type, | |
416 | info->fix.smem_len)) { | |
417 | dev_err(fbi->dev, "no memory available\n"); | |
418 | return -ENOMEM; | |
419 | } | |
420 | ||
421 | info->fix.smem_start = fbi->fbmem_res->start + par->screen.sm_addr; | |
422 | ||
423 | info->screen_base = fbi->fbmem + par->screen.sm_addr; | |
424 | info->screen_size = info->fix.smem_len; | |
425 | ||
426 | /* set start of framebuffer to the screen */ | |
427 | ||
428 | writel(par->screen.sm_addr | SM501_ADDR_FLIP, fbi->regs + head_addr); | |
429 | ||
430 | /* program CRT clock */ | |
431 | ||
432 | pixclock = sm501fb_ps_to_hz(var->pixclock); | |
433 | ||
434 | sm501pixclock = sm501_set_clock(fbi->dev->parent, clock_type, | |
435 | pixclock); | |
436 | ||
437 | /* update fb layer with actual clock used */ | |
438 | var->pixclock = sm501fb_hz_to_ps(sm501pixclock); | |
439 | ||
440 | dev_dbg(fbi->dev, "%s: pixclock(ps) = %u, pixclock(Hz) = %lu, " | |
441 | "sm501pixclock = %lu, error = %ld%%\n", | |
442 | __func__, var->pixclock, pixclock, sm501pixclock, | |
443 | ((pixclock - sm501pixclock)*100)/pixclock); | |
444 | ||
445 | return 0; | |
446 | } | |
447 | ||
448 | /* sm501fb_set_par_geometry | |
449 | * | |
450 | * set the geometry registers for specified framebuffer. | |
451 | */ | |
452 | ||
453 | static void sm501fb_set_par_geometry(struct fb_info *info, | |
454 | struct fb_var_screeninfo *var) | |
455 | { | |
456 | struct sm501fb_par *par = info->par; | |
457 | struct sm501fb_info *fbi = par->info; | |
458 | void __iomem *base = fbi->regs; | |
459 | unsigned long reg; | |
460 | ||
461 | if (par->head == HEAD_CRT) | |
462 | base += SM501_DC_CRT_H_TOT; | |
463 | else | |
464 | base += SM501_DC_PANEL_H_TOT; | |
465 | ||
466 | /* set framebuffer width and display width */ | |
467 | ||
468 | reg = info->fix.line_length; | |
469 | reg |= ((var->xres * var->bits_per_pixel)/8) << 16; | |
470 | ||
471 | writel(reg, fbi->regs + (par->head == HEAD_CRT ? | |
472 | SM501_DC_CRT_FB_OFFSET : SM501_DC_PANEL_FB_OFFSET)); | |
473 | ||
474 | /* program horizontal total */ | |
475 | ||
476 | reg = (h_total(var) - 1) << 16; | |
477 | reg |= (var->xres - 1); | |
478 | ||
479 | writel(reg, base + SM501_OFF_DC_H_TOT); | |
480 | ||
481 | /* program horizontal sync */ | |
482 | ||
483 | reg = var->hsync_len << 16; | |
484 | reg |= var->xres + var->right_margin - 1; | |
485 | ||
486 | writel(reg, base + SM501_OFF_DC_H_SYNC); | |
487 | ||
488 | /* program vertical total */ | |
489 | ||
490 | reg = (v_total(var) - 1) << 16; | |
491 | reg |= (var->yres - 1); | |
492 | ||
493 | writel(reg, base + SM501_OFF_DC_V_TOT); | |
494 | ||
495 | /* program vertical sync */ | |
496 | reg = var->vsync_len << 16; | |
497 | reg |= var->yres + var->lower_margin - 1; | |
498 | ||
499 | writel(reg, base + SM501_OFF_DC_V_SYNC); | |
500 | } | |
501 | ||
502 | /* sm501fb_pan_crt | |
503 | * | |
504 | * pan the CRT display output within an virtual framebuffer | |
505 | */ | |
506 | ||
507 | static int sm501fb_pan_crt(struct fb_var_screeninfo *var, | |
508 | struct fb_info *info) | |
509 | { | |
510 | struct sm501fb_par *par = info->par; | |
511 | struct sm501fb_info *fbi = par->info; | |
512 | unsigned int bytes_pixel = var->bits_per_pixel / 8; | |
513 | unsigned long reg; | |
514 | unsigned long xoffs; | |
515 | ||
516 | xoffs = var->xoffset * bytes_pixel; | |
517 | ||
518 | reg = readl(fbi->regs + SM501_DC_CRT_CONTROL); | |
519 | ||
520 | reg &= ~SM501_DC_CRT_CONTROL_PIXEL_MASK; | |
521 | reg |= ((xoffs & 15) / bytes_pixel) << 4; | |
522 | writel(reg, fbi->regs + SM501_DC_CRT_CONTROL); | |
523 | ||
524 | reg = (par->screen.sm_addr + xoffs + | |
525 | var->yoffset * info->fix.line_length); | |
526 | writel(reg | SM501_ADDR_FLIP, fbi->regs + SM501_DC_CRT_FB_ADDR); | |
527 | ||
528 | sm501fb_sync_regs(fbi); | |
529 | return 0; | |
530 | } | |
531 | ||
532 | /* sm501fb_pan_pnl | |
533 | * | |
534 | * pan the panel display output within an virtual framebuffer | |
535 | */ | |
536 | ||
537 | static int sm501fb_pan_pnl(struct fb_var_screeninfo *var, | |
538 | struct fb_info *info) | |
539 | { | |
540 | struct sm501fb_par *par = info->par; | |
541 | struct sm501fb_info *fbi = par->info; | |
542 | unsigned long reg; | |
543 | ||
544 | reg = var->xoffset | (var->xres_virtual << 16); | |
545 | writel(reg, fbi->regs + SM501_DC_PANEL_FB_WIDTH); | |
546 | ||
547 | reg = var->yoffset | (var->yres_virtual << 16); | |
548 | writel(reg, fbi->regs + SM501_DC_PANEL_FB_HEIGHT); | |
549 | ||
550 | sm501fb_sync_regs(fbi); | |
551 | return 0; | |
552 | } | |
553 | ||
554 | /* sm501fb_set_par_crt | |
555 | * | |
556 | * Set the CRT video mode from the fb_info structure | |
557 | */ | |
558 | ||
559 | static int sm501fb_set_par_crt(struct fb_info *info) | |
560 | { | |
561 | struct sm501fb_par *par = info->par; | |
562 | struct sm501fb_info *fbi = par->info; | |
563 | struct fb_var_screeninfo *var = &info->var; | |
564 | unsigned long control; /* control register */ | |
565 | int ret; | |
566 | ||
567 | /* activate new configuration */ | |
568 | ||
569 | dev_dbg(fbi->dev, "%s(%p)\n", __func__, info); | |
570 | ||
571 | /* enable CRT DAC - note 0 is on!*/ | |
572 | sm501_misc_control(fbi->dev->parent, 0, SM501_MISC_DAC_POWER); | |
573 | ||
574 | control = readl(fbi->regs + SM501_DC_CRT_CONTROL); | |
575 | ||
576 | control &= (SM501_DC_CRT_CONTROL_PIXEL_MASK | | |
577 | SM501_DC_CRT_CONTROL_GAMMA | | |
578 | SM501_DC_CRT_CONTROL_BLANK | | |
579 | SM501_DC_CRT_CONTROL_SEL | | |
580 | SM501_DC_CRT_CONTROL_CP | | |
581 | SM501_DC_CRT_CONTROL_TVP); | |
582 | ||
583 | /* set the sync polarities before we check data source */ | |
584 | ||
585 | if ((var->sync & FB_SYNC_HOR_HIGH_ACT) == 0) | |
586 | control |= SM501_DC_CRT_CONTROL_HSP; | |
587 | ||
588 | if ((var->sync & FB_SYNC_VERT_HIGH_ACT) == 0) | |
589 | control |= SM501_DC_CRT_CONTROL_VSP; | |
590 | ||
591 | if ((control & SM501_DC_CRT_CONTROL_SEL) == 0) { | |
592 | /* the head is displaying panel data... */ | |
593 | ||
594 | sm501_alloc_mem(fbi, &par->screen, SM501_MEMF_CRT, 0); | |
595 | goto out_update; | |
596 | } | |
597 | ||
598 | ret = sm501fb_set_par_common(info, var); | |
599 | if (ret) { | |
600 | dev_err(fbi->dev, "failed to set common parameters\n"); | |
601 | return ret; | |
602 | } | |
603 | ||
604 | sm501fb_pan_crt(var, info); | |
605 | sm501fb_set_par_geometry(info, var); | |
606 | ||
607 | control |= SM501_FIFO_3; /* fill if >3 free slots */ | |
608 | ||
609 | switch(var->bits_per_pixel) { | |
610 | case 8: | |
611 | control |= SM501_DC_CRT_CONTROL_8BPP; | |
612 | break; | |
613 | ||
614 | case 16: | |
615 | control |= SM501_DC_CRT_CONTROL_16BPP; | |
616 | break; | |
617 | ||
618 | case 32: | |
619 | control |= SM501_DC_CRT_CONTROL_32BPP; | |
620 | sm501fb_setup_gamma(fbi, SM501_DC_CRT_PALETTE); | |
621 | break; | |
622 | ||
623 | default: | |
624 | BUG(); | |
625 | } | |
626 | ||
627 | control |= SM501_DC_CRT_CONTROL_SEL; /* CRT displays CRT data */ | |
628 | control |= SM501_DC_CRT_CONTROL_TE; /* enable CRT timing */ | |
629 | control |= SM501_DC_CRT_CONTROL_ENABLE; /* enable CRT plane */ | |
630 | ||
631 | out_update: | |
632 | dev_dbg(fbi->dev, "new control is %08lx\n", control); | |
633 | ||
634 | writel(control, fbi->regs + SM501_DC_CRT_CONTROL); | |
635 | sm501fb_sync_regs(fbi); | |
636 | ||
637 | return 0; | |
638 | } | |
639 | ||
640 | static void sm501fb_panel_power(struct sm501fb_info *fbi, int to) | |
641 | { | |
642 | unsigned long control; | |
643 | void __iomem *ctrl_reg = fbi->regs + SM501_DC_PANEL_CONTROL; | |
dfcffa46 | 644 | struct sm501_platdata_fbsub *pd = fbi->pdata->fb_pnl; |
5fc404e4 BD |
645 | |
646 | control = readl(ctrl_reg); | |
647 | ||
648 | if (to && (control & SM501_DC_PANEL_CONTROL_VDD) == 0) { | |
649 | /* enable panel power */ | |
650 | ||
651 | control |= SM501_DC_PANEL_CONTROL_VDD; /* FPVDDEN */ | |
652 | writel(control, ctrl_reg); | |
653 | sm501fb_sync_regs(fbi); | |
654 | mdelay(10); | |
655 | ||
656 | control |= SM501_DC_PANEL_CONTROL_DATA; /* DATA */ | |
657 | writel(control, ctrl_reg); | |
658 | sm501fb_sync_regs(fbi); | |
659 | mdelay(10); | |
660 | ||
dfcffa46 MD |
661 | if (pd->flags & SM501FB_FLAG_PANEL_USE_VBIASEN) { |
662 | control |= SM501_DC_PANEL_CONTROL_BIAS; /* VBIASEN */ | |
663 | writel(control, ctrl_reg); | |
664 | sm501fb_sync_regs(fbi); | |
665 | mdelay(10); | |
666 | } | |
5fc404e4 | 667 | |
dfcffa46 MD |
668 | if (pd->flags & SM501FB_FLAG_PANEL_USE_FPEN) { |
669 | control |= SM501_DC_PANEL_CONTROL_FPEN; | |
670 | writel(control, ctrl_reg); | |
671 | sm501fb_sync_regs(fbi); | |
672 | mdelay(10); | |
673 | } | |
5fc404e4 BD |
674 | } else if (!to && (control & SM501_DC_PANEL_CONTROL_VDD) != 0) { |
675 | /* disable panel power */ | |
dfcffa46 MD |
676 | if (pd->flags & SM501FB_FLAG_PANEL_USE_FPEN) { |
677 | control &= ~SM501_DC_PANEL_CONTROL_FPEN; | |
678 | writel(control, ctrl_reg); | |
679 | sm501fb_sync_regs(fbi); | |
680 | mdelay(10); | |
681 | } | |
5fc404e4 | 682 | |
dfcffa46 MD |
683 | if (pd->flags & SM501FB_FLAG_PANEL_USE_VBIASEN) { |
684 | control &= ~SM501_DC_PANEL_CONTROL_BIAS; | |
685 | writel(control, ctrl_reg); | |
686 | sm501fb_sync_regs(fbi); | |
687 | mdelay(10); | |
688 | } | |
5fc404e4 BD |
689 | |
690 | control &= ~SM501_DC_PANEL_CONTROL_DATA; | |
691 | writel(control, ctrl_reg); | |
692 | sm501fb_sync_regs(fbi); | |
693 | mdelay(10); | |
694 | ||
695 | control &= ~SM501_DC_PANEL_CONTROL_VDD; | |
696 | writel(control, ctrl_reg); | |
697 | sm501fb_sync_regs(fbi); | |
698 | mdelay(10); | |
699 | } | |
700 | ||
701 | sm501fb_sync_regs(fbi); | |
702 | } | |
703 | ||
704 | /* sm501fb_set_par_pnl | |
705 | * | |
706 | * Set the panel video mode from the fb_info structure | |
707 | */ | |
708 | ||
709 | static int sm501fb_set_par_pnl(struct fb_info *info) | |
710 | { | |
711 | struct sm501fb_par *par = info->par; | |
712 | struct sm501fb_info *fbi = par->info; | |
713 | struct fb_var_screeninfo *var = &info->var; | |
714 | unsigned long control; | |
715 | unsigned long reg; | |
716 | int ret; | |
717 | ||
718 | dev_dbg(fbi->dev, "%s(%p)\n", __func__, info); | |
719 | ||
720 | /* activate this new configuration */ | |
721 | ||
722 | ret = sm501fb_set_par_common(info, var); | |
723 | if (ret) | |
724 | return ret; | |
725 | ||
726 | sm501fb_pan_pnl(var, info); | |
727 | sm501fb_set_par_geometry(info, var); | |
728 | ||
729 | /* update control register */ | |
730 | ||
731 | control = readl(fbi->regs + SM501_DC_PANEL_CONTROL); | |
732 | control &= (SM501_DC_PANEL_CONTROL_GAMMA | | |
733 | SM501_DC_PANEL_CONTROL_VDD | | |
734 | SM501_DC_PANEL_CONTROL_DATA | | |
735 | SM501_DC_PANEL_CONTROL_BIAS | | |
736 | SM501_DC_PANEL_CONTROL_FPEN | | |
737 | SM501_DC_PANEL_CONTROL_CP | | |
738 | SM501_DC_PANEL_CONTROL_CK | | |
739 | SM501_DC_PANEL_CONTROL_HP | | |
740 | SM501_DC_PANEL_CONTROL_VP | | |
741 | SM501_DC_PANEL_CONTROL_HPD | | |
742 | SM501_DC_PANEL_CONTROL_VPD); | |
743 | ||
744 | control |= SM501_FIFO_3; /* fill if >3 free slots */ | |
745 | ||
746 | switch(var->bits_per_pixel) { | |
747 | case 8: | |
748 | control |= SM501_DC_PANEL_CONTROL_8BPP; | |
749 | break; | |
750 | ||
751 | case 16: | |
752 | control |= SM501_DC_PANEL_CONTROL_16BPP; | |
753 | break; | |
754 | ||
755 | case 32: | |
756 | control |= SM501_DC_PANEL_CONTROL_32BPP; | |
757 | sm501fb_setup_gamma(fbi, SM501_DC_PANEL_PALETTE); | |
758 | break; | |
759 | ||
760 | default: | |
761 | BUG(); | |
762 | } | |
763 | ||
764 | writel(0x0, fbi->regs + SM501_DC_PANEL_PANNING_CONTROL); | |
765 | ||
766 | /* panel plane top left and bottom right location */ | |
767 | ||
768 | writel(0x00, fbi->regs + SM501_DC_PANEL_TL_LOC); | |
769 | ||
770 | reg = var->xres - 1; | |
771 | reg |= (var->yres - 1) << 16; | |
772 | ||
773 | writel(reg, fbi->regs + SM501_DC_PANEL_BR_LOC); | |
774 | ||
775 | /* program panel control register */ | |
776 | ||
777 | control |= SM501_DC_PANEL_CONTROL_TE; /* enable PANEL timing */ | |
778 | control |= SM501_DC_PANEL_CONTROL_EN; /* enable PANEL gfx plane */ | |
779 | ||
780 | if ((var->sync & FB_SYNC_HOR_HIGH_ACT) == 0) | |
781 | control |= SM501_DC_PANEL_CONTROL_HSP; | |
782 | ||
783 | if ((var->sync & FB_SYNC_VERT_HIGH_ACT) == 0) | |
784 | control |= SM501_DC_PANEL_CONTROL_VSP; | |
785 | ||
786 | writel(control, fbi->regs + SM501_DC_PANEL_CONTROL); | |
787 | sm501fb_sync_regs(fbi); | |
788 | ||
eb78f9b3 BD |
789 | /* ensure the panel interface is not tristated at this point */ |
790 | ||
791 | sm501_modify_reg(fbi->dev->parent, SM501_SYSTEM_CONTROL, | |
792 | 0, SM501_SYSCTRL_PANEL_TRISTATE); | |
793 | ||
5fc404e4 BD |
794 | /* power the panel up */ |
795 | sm501fb_panel_power(fbi, 1); | |
796 | return 0; | |
797 | } | |
798 | ||
799 | ||
800 | /* chan_to_field | |
801 | * | |
802 | * convert a colour value into a field position | |
803 | * | |
804 | * from pxafb.c | |
805 | */ | |
806 | ||
807 | static inline unsigned int chan_to_field(unsigned int chan, | |
808 | struct fb_bitfield *bf) | |
809 | { | |
810 | chan &= 0xffff; | |
811 | chan >>= 16 - bf->length; | |
812 | return chan << bf->offset; | |
813 | } | |
814 | ||
815 | /* sm501fb_setcolreg | |
816 | * | |
817 | * set the colour mapping for modes that support palettised data | |
818 | */ | |
819 | ||
820 | static int sm501fb_setcolreg(unsigned regno, | |
821 | unsigned red, unsigned green, unsigned blue, | |
822 | unsigned transp, struct fb_info *info) | |
823 | { | |
824 | struct sm501fb_par *par = info->par; | |
825 | struct sm501fb_info *fbi = par->info; | |
826 | void __iomem *base = fbi->regs; | |
827 | unsigned int val; | |
828 | ||
829 | if (par->head == HEAD_CRT) | |
830 | base += SM501_DC_CRT_PALETTE; | |
831 | else | |
832 | base += SM501_DC_PANEL_PALETTE; | |
833 | ||
834 | switch (info->fix.visual) { | |
835 | case FB_VISUAL_TRUECOLOR: | |
836 | /* true-colour, use pseuo-palette */ | |
837 | ||
838 | if (regno < 16) { | |
839 | u32 *pal = par->pseudo_palette; | |
840 | ||
841 | val = chan_to_field(red, &info->var.red); | |
842 | val |= chan_to_field(green, &info->var.green); | |
843 | val |= chan_to_field(blue, &info->var.blue); | |
844 | ||
845 | pal[regno] = val; | |
846 | } | |
847 | break; | |
848 | ||
849 | case FB_VISUAL_PSEUDOCOLOR: | |
850 | if (regno < 256) { | |
851 | val = (red >> 8) << 16; | |
852 | val |= (green >> 8) << 8; | |
853 | val |= blue >> 8; | |
854 | ||
855 | writel(val, base + (regno * 4)); | |
856 | } | |
857 | ||
858 | break; | |
859 | ||
860 | default: | |
861 | return 1; /* unknown type */ | |
862 | } | |
863 | ||
864 | return 0; | |
865 | } | |
866 | ||
867 | /* sm501fb_blank_pnl | |
868 | * | |
869 | * Blank or un-blank the panel interface | |
870 | */ | |
871 | ||
872 | static int sm501fb_blank_pnl(int blank_mode, struct fb_info *info) | |
873 | { | |
874 | struct sm501fb_par *par = info->par; | |
875 | struct sm501fb_info *fbi = par->info; | |
876 | ||
877 | dev_dbg(fbi->dev, "%s(mode=%d, %p)\n", __func__, blank_mode, info); | |
878 | ||
879 | switch (blank_mode) { | |
880 | case FB_BLANK_POWERDOWN: | |
881 | sm501fb_panel_power(fbi, 0); | |
882 | break; | |
883 | ||
884 | case FB_BLANK_UNBLANK: | |
885 | sm501fb_panel_power(fbi, 1); | |
886 | break; | |
887 | ||
888 | case FB_BLANK_NORMAL: | |
889 | case FB_BLANK_VSYNC_SUSPEND: | |
890 | case FB_BLANK_HSYNC_SUSPEND: | |
891 | default: | |
892 | return 1; | |
893 | } | |
894 | ||
895 | return 0; | |
896 | } | |
897 | ||
898 | /* sm501fb_blank_crt | |
899 | * | |
900 | * Blank or un-blank the crt interface | |
901 | */ | |
902 | ||
903 | static int sm501fb_blank_crt(int blank_mode, struct fb_info *info) | |
904 | { | |
905 | struct sm501fb_par *par = info->par; | |
906 | struct sm501fb_info *fbi = par->info; | |
907 | unsigned long ctrl; | |
908 | ||
909 | dev_dbg(fbi->dev, "%s(mode=%d, %p)\n", __func__, blank_mode, info); | |
910 | ||
911 | ctrl = readl(fbi->regs + SM501_DC_CRT_CONTROL); | |
912 | ||
913 | switch (blank_mode) { | |
914 | case FB_BLANK_POWERDOWN: | |
915 | ctrl &= ~SM501_DC_CRT_CONTROL_ENABLE; | |
916 | sm501_misc_control(fbi->dev->parent, SM501_MISC_DAC_POWER, 0); | |
917 | ||
918 | case FB_BLANK_NORMAL: | |
919 | ctrl |= SM501_DC_CRT_CONTROL_BLANK; | |
920 | break; | |
921 | ||
922 | case FB_BLANK_UNBLANK: | |
923 | ctrl &= ~SM501_DC_CRT_CONTROL_BLANK; | |
924 | ctrl |= SM501_DC_CRT_CONTROL_ENABLE; | |
925 | sm501_misc_control(fbi->dev->parent, 0, SM501_MISC_DAC_POWER); | |
926 | break; | |
927 | ||
928 | case FB_BLANK_VSYNC_SUSPEND: | |
929 | case FB_BLANK_HSYNC_SUSPEND: | |
930 | default: | |
931 | return 1; | |
932 | ||
933 | } | |
934 | ||
935 | writel(ctrl, fbi->regs + SM501_DC_CRT_CONTROL); | |
936 | sm501fb_sync_regs(fbi); | |
937 | ||
938 | return 0; | |
939 | } | |
940 | ||
941 | /* sm501fb_cursor | |
942 | * | |
943 | * set or change the hardware cursor parameters | |
944 | */ | |
945 | ||
9540f75b | 946 | static int sm501fb_cursor(struct fb_info *info, struct fb_cursor *cursor) |
5fc404e4 BD |
947 | { |
948 | struct sm501fb_par *par = info->par; | |
949 | struct sm501fb_info *fbi = par->info; | |
950 | void __iomem *base = fbi->regs; | |
951 | unsigned long hwc_addr; | |
952 | unsigned long fg, bg; | |
953 | ||
954 | dev_dbg(fbi->dev, "%s(%p,%p)\n", __func__, info, cursor); | |
955 | ||
956 | if (par->head == HEAD_CRT) | |
957 | base += SM501_DC_CRT_HWC_BASE; | |
958 | else | |
959 | base += SM501_DC_PANEL_HWC_BASE; | |
960 | ||
961 | /* check not being asked to exceed capabilities */ | |
962 | ||
963 | if (cursor->image.width > 64) | |
964 | return -EINVAL; | |
965 | ||
966 | if (cursor->image.height > 64) | |
967 | return -EINVAL; | |
968 | ||
969 | if (cursor->image.depth > 1) | |
970 | return -EINVAL; | |
971 | ||
972 | hwc_addr = readl(base + SM501_OFF_HWC_ADDR); | |
973 | ||
974 | if (cursor->enable) | |
975 | writel(hwc_addr | SM501_HWC_EN, base + SM501_OFF_HWC_ADDR); | |
976 | else | |
977 | writel(hwc_addr & ~SM501_HWC_EN, base + SM501_OFF_HWC_ADDR); | |
978 | ||
979 | /* set data */ | |
980 | if (cursor->set & FB_CUR_SETPOS) { | |
981 | unsigned int x = cursor->image.dx; | |
982 | unsigned int y = cursor->image.dy; | |
983 | ||
984 | if (x >= 2048 || y >= 2048 ) | |
985 | return -EINVAL; | |
986 | ||
987 | dev_dbg(fbi->dev, "set position %d,%d\n", x, y); | |
988 | ||
989 | //y += cursor->image.height; | |
990 | ||
991 | writel(x | (y << 16), base + SM501_OFF_HWC_LOC); | |
992 | } | |
993 | ||
994 | if (cursor->set & FB_CUR_SETCMAP) { | |
995 | unsigned int bg_col = cursor->image.bg_color; | |
996 | unsigned int fg_col = cursor->image.fg_color; | |
997 | ||
998 | dev_dbg(fbi->dev, "%s: update cmap (%08x,%08x)\n", | |
999 | __func__, bg_col, fg_col); | |
1000 | ||
1001 | bg = ((info->cmap.red[bg_col] & 0xF8) << 8) | | |
1002 | ((info->cmap.green[bg_col] & 0xFC) << 3) | | |
1003 | ((info->cmap.blue[bg_col] & 0xF8) >> 3); | |
1004 | ||
1005 | fg = ((info->cmap.red[fg_col] & 0xF8) << 8) | | |
1006 | ((info->cmap.green[fg_col] & 0xFC) << 3) | | |
1007 | ((info->cmap.blue[fg_col] & 0xF8) >> 3); | |
1008 | ||
be3478dd | 1009 | dev_dbg(fbi->dev, "fgcol %08lx, bgcol %08lx\n", fg, bg); |
5fc404e4 BD |
1010 | |
1011 | writel(bg, base + SM501_OFF_HWC_COLOR_1_2); | |
1012 | writel(fg, base + SM501_OFF_HWC_COLOR_3); | |
1013 | } | |
1014 | ||
1015 | if (cursor->set & FB_CUR_SETSIZE || | |
1016 | cursor->set & (FB_CUR_SETIMAGE | FB_CUR_SETSHAPE)) { | |
1017 | /* SM501 cursor is a two bpp 64x64 bitmap this routine | |
1018 | * clears it to transparent then combines the cursor | |
1019 | * shape plane with the colour plane to set the | |
1020 | * cursor */ | |
1021 | int x, y; | |
1022 | const unsigned char *pcol = cursor->image.data; | |
1023 | const unsigned char *pmsk = cursor->mask; | |
1024 | void __iomem *dst = par->cursor.k_addr; | |
1025 | unsigned char dcol = 0; | |
1026 | unsigned char dmsk = 0; | |
1027 | unsigned int op; | |
1028 | ||
1029 | dev_dbg(fbi->dev, "%s: setting shape (%d,%d)\n", | |
1030 | __func__, cursor->image.width, cursor->image.height); | |
1031 | ||
1032 | for (op = 0; op < (64*64*2)/8; op+=4) | |
1033 | writel(0x0, dst + op); | |
1034 | ||
1035 | for (y = 0; y < cursor->image.height; y++) { | |
1036 | for (x = 0; x < cursor->image.width; x++) { | |
1037 | if ((x % 8) == 0) { | |
1038 | dcol = *pcol++; | |
1039 | dmsk = *pmsk++; | |
1040 | } else { | |
1041 | dcol >>= 1; | |
1042 | dmsk >>= 1; | |
1043 | } | |
1044 | ||
1045 | if (dmsk & 1) { | |
1046 | op = (dcol & 1) ? 1 : 3; | |
1047 | op <<= ((x % 4) * 2); | |
1048 | ||
1049 | op |= readb(dst + (x / 4)); | |
1050 | writeb(op, dst + (x / 4)); | |
1051 | } | |
1052 | } | |
1053 | dst += (64*2)/8; | |
1054 | } | |
1055 | } | |
1056 | ||
1057 | sm501fb_sync_regs(fbi); /* ensure cursor data flushed */ | |
1058 | return 0; | |
1059 | } | |
1060 | ||
1061 | /* sm501fb_crtsrc_show | |
1062 | * | |
1063 | * device attribute code to show where the crt output is sourced from | |
1064 | */ | |
1065 | ||
1066 | static ssize_t sm501fb_crtsrc_show(struct device *dev, | |
1067 | struct device_attribute *attr, char *buf) | |
1068 | { | |
1069 | struct sm501fb_info *info = dev_get_drvdata(dev); | |
1070 | unsigned long ctrl; | |
1071 | ||
1072 | ctrl = readl(info->regs + SM501_DC_CRT_CONTROL); | |
1073 | ctrl &= SM501_DC_CRT_CONTROL_SEL; | |
1074 | ||
1075 | return snprintf(buf, PAGE_SIZE, "%s\n", ctrl ? "crt" : "panel"); | |
1076 | } | |
1077 | ||
1078 | /* sm501fb_crtsrc_show | |
1079 | * | |
1080 | * device attribute code to set where the crt output is sourced from | |
1081 | */ | |
1082 | ||
1083 | static ssize_t sm501fb_crtsrc_store(struct device *dev, | |
1084 | struct device_attribute *attr, | |
1085 | const char *buf, size_t len) | |
1086 | { | |
1087 | struct sm501fb_info *info = dev_get_drvdata(dev); | |
1088 | enum sm501_controller head; | |
1089 | unsigned long ctrl; | |
1090 | ||
1091 | if (len < 1) | |
1092 | return -EINVAL; | |
1093 | ||
1f2b69f9 | 1094 | if (strnicmp(buf, "crt", 3) == 0) |
5fc404e4 | 1095 | head = HEAD_CRT; |
1f2b69f9 | 1096 | else if (strnicmp(buf, "panel", 5) == 0) |
5fc404e4 BD |
1097 | head = HEAD_PANEL; |
1098 | else | |
1099 | return -EINVAL; | |
1100 | ||
1101 | dev_info(dev, "setting crt source to head %d\n", head); | |
1102 | ||
1103 | ctrl = readl(info->regs + SM501_DC_CRT_CONTROL); | |
1104 | ||
1105 | if (head == HEAD_CRT) { | |
1106 | ctrl |= SM501_DC_CRT_CONTROL_SEL; | |
1107 | ctrl |= SM501_DC_CRT_CONTROL_ENABLE; | |
1108 | ctrl |= SM501_DC_CRT_CONTROL_TE; | |
1109 | } else { | |
1110 | ctrl &= ~SM501_DC_CRT_CONTROL_SEL; | |
1111 | ctrl &= ~SM501_DC_CRT_CONTROL_ENABLE; | |
1112 | ctrl &= ~SM501_DC_CRT_CONTROL_TE; | |
1113 | } | |
1114 | ||
1115 | writel(ctrl, info->regs + SM501_DC_CRT_CONTROL); | |
1116 | sm501fb_sync_regs(info); | |
1117 | ||
1f2b69f9 | 1118 | return len; |
5fc404e4 BD |
1119 | } |
1120 | ||
1121 | /* Prepare the device_attr for registration with sysfs later */ | |
1122 | static DEVICE_ATTR(crt_src, 0666, sm501fb_crtsrc_show, sm501fb_crtsrc_store); | |
1123 | ||
1124 | /* sm501fb_show_regs | |
1125 | * | |
1126 | * show the primary sm501 registers | |
1127 | */ | |
1128 | static int sm501fb_show_regs(struct sm501fb_info *info, char *ptr, | |
1129 | unsigned int start, unsigned int len) | |
1130 | { | |
1131 | void __iomem *mem = info->regs; | |
1132 | char *buf = ptr; | |
1133 | unsigned int reg; | |
1134 | ||
1135 | for (reg = start; reg < (len + start); reg += 4) | |
1136 | ptr += sprintf(ptr, "%08x = %08x\n", reg, readl(mem + reg)); | |
1137 | ||
1138 | return ptr - buf; | |
1139 | } | |
1140 | ||
1141 | /* sm501fb_debug_show_crt | |
1142 | * | |
1143 | * show the crt control and cursor registers | |
1144 | */ | |
1145 | ||
1146 | static ssize_t sm501fb_debug_show_crt(struct device *dev, | |
1147 | struct device_attribute *attr, char *buf) | |
1148 | { | |
1149 | struct sm501fb_info *info = dev_get_drvdata(dev); | |
1150 | char *ptr = buf; | |
1151 | ||
1152 | ptr += sm501fb_show_regs(info, ptr, SM501_DC_CRT_CONTROL, 0x40); | |
1153 | ptr += sm501fb_show_regs(info, ptr, SM501_DC_CRT_HWC_BASE, 0x10); | |
1154 | ||
1155 | return ptr - buf; | |
1156 | } | |
1157 | ||
1158 | static DEVICE_ATTR(fbregs_crt, 0444, sm501fb_debug_show_crt, NULL); | |
1159 | ||
1160 | /* sm501fb_debug_show_pnl | |
1161 | * | |
1162 | * show the panel control and cursor registers | |
1163 | */ | |
1164 | ||
1165 | static ssize_t sm501fb_debug_show_pnl(struct device *dev, | |
1166 | struct device_attribute *attr, char *buf) | |
1167 | { | |
1168 | struct sm501fb_info *info = dev_get_drvdata(dev); | |
1169 | char *ptr = buf; | |
1170 | ||
1171 | ptr += sm501fb_show_regs(info, ptr, 0x0, 0x40); | |
1172 | ptr += sm501fb_show_regs(info, ptr, SM501_DC_PANEL_HWC_BASE, 0x10); | |
1173 | ||
1174 | return ptr - buf; | |
1175 | } | |
1176 | ||
1177 | static DEVICE_ATTR(fbregs_pnl, 0444, sm501fb_debug_show_pnl, NULL); | |
1178 | ||
1179 | /* framebuffer ops */ | |
1180 | ||
1181 | static struct fb_ops sm501fb_ops_crt = { | |
1182 | .owner = THIS_MODULE, | |
1183 | .fb_check_var = sm501fb_check_var_crt, | |
1184 | .fb_set_par = sm501fb_set_par_crt, | |
1185 | .fb_blank = sm501fb_blank_crt, | |
1186 | .fb_setcolreg = sm501fb_setcolreg, | |
1187 | .fb_pan_display = sm501fb_pan_crt, | |
1188 | .fb_cursor = sm501fb_cursor, | |
1189 | .fb_fillrect = cfb_fillrect, | |
1190 | .fb_copyarea = cfb_copyarea, | |
1191 | .fb_imageblit = cfb_imageblit, | |
1192 | }; | |
1193 | ||
1194 | static struct fb_ops sm501fb_ops_pnl = { | |
1195 | .owner = THIS_MODULE, | |
1196 | .fb_check_var = sm501fb_check_var_pnl, | |
1197 | .fb_set_par = sm501fb_set_par_pnl, | |
1198 | .fb_pan_display = sm501fb_pan_pnl, | |
1199 | .fb_blank = sm501fb_blank_pnl, | |
1200 | .fb_setcolreg = sm501fb_setcolreg, | |
1201 | .fb_cursor = sm501fb_cursor, | |
1202 | .fb_fillrect = cfb_fillrect, | |
1203 | .fb_copyarea = cfb_copyarea, | |
1204 | .fb_imageblit = cfb_imageblit, | |
1205 | }; | |
1206 | ||
1207 | /* sm501fb_info_alloc | |
1208 | * | |
1209 | * creates and initialises an sm501fb_info structure | |
1210 | */ | |
1211 | ||
1212 | static struct sm501fb_info *sm501fb_info_alloc(struct fb_info *fbinfo_crt, | |
1213 | struct fb_info *fbinfo_pnl) | |
1214 | { | |
1215 | struct sm501fb_info *info; | |
1216 | struct sm501fb_par *par; | |
1217 | ||
1218 | info = kzalloc(sizeof(struct sm501fb_info), GFP_KERNEL); | |
1219 | if (info) { | |
1220 | /* set the references back */ | |
1221 | ||
1222 | par = fbinfo_crt->par; | |
1223 | par->info = info; | |
1224 | par->head = HEAD_CRT; | |
1225 | fbinfo_crt->pseudo_palette = &par->pseudo_palette; | |
1226 | ||
1227 | par = fbinfo_pnl->par; | |
1228 | par->info = info; | |
1229 | par->head = HEAD_PANEL; | |
1230 | fbinfo_pnl->pseudo_palette = &par->pseudo_palette; | |
1231 | ||
1232 | /* store the two fbs into our info */ | |
1233 | info->fb[HEAD_CRT] = fbinfo_crt; | |
1234 | info->fb[HEAD_PANEL] = fbinfo_pnl; | |
1235 | } | |
1236 | ||
1237 | return info; | |
1238 | } | |
1239 | ||
1240 | /* sm501_init_cursor | |
1241 | * | |
1242 | * initialise hw cursor parameters | |
1243 | */ | |
1244 | ||
9540f75b | 1245 | static int sm501_init_cursor(struct fb_info *fbi, unsigned int reg_base) |
5fc404e4 BD |
1246 | { |
1247 | struct sm501fb_par *par = fbi->par; | |
1248 | struct sm501fb_info *info = par->info; | |
1249 | int ret; | |
1250 | ||
1251 | par->cursor_regs = info->regs + reg_base; | |
1252 | ||
1253 | ret = sm501_alloc_mem(info, &par->cursor, SM501_MEMF_CURSOR, 1024); | |
1254 | if (ret < 0) | |
1255 | return ret; | |
1256 | ||
1257 | /* initialise the colour registers */ | |
1258 | ||
1259 | writel(par->cursor.sm_addr, par->cursor_regs + SM501_OFF_HWC_ADDR); | |
1260 | ||
1261 | writel(0x00, par->cursor_regs + SM501_OFF_HWC_LOC); | |
1262 | writel(0x00, par->cursor_regs + SM501_OFF_HWC_COLOR_1_2); | |
1263 | writel(0x00, par->cursor_regs + SM501_OFF_HWC_COLOR_3); | |
1264 | sm501fb_sync_regs(info); | |
1265 | ||
1266 | return 0; | |
1267 | } | |
1268 | ||
1269 | /* sm501fb_info_start | |
1270 | * | |
1271 | * fills the par structure claiming resources and remapping etc. | |
1272 | */ | |
1273 | ||
1274 | static int sm501fb_start(struct sm501fb_info *info, | |
1275 | struct platform_device *pdev) | |
1276 | { | |
1277 | struct resource *res; | |
1278 | struct device *dev; | |
1279 | int ret; | |
1280 | ||
1281 | info->dev = dev = &pdev->dev; | |
1282 | platform_set_drvdata(pdev, info); | |
1283 | ||
1284 | info->irq = ret = platform_get_irq(pdev, 0); | |
1285 | if (ret < 0) { | |
1286 | /* we currently do not use the IRQ */ | |
1287 | dev_warn(dev, "no irq for device\n"); | |
1288 | } | |
1289 | ||
1290 | /* allocate, reserve and remap resources for registers */ | |
1291 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
1292 | if (res == NULL) { | |
1293 | dev_err(dev, "no resource definition for registers\n"); | |
1294 | ret = -ENOENT; | |
1295 | goto err_release; | |
1296 | } | |
1297 | ||
1298 | info->regs_res = request_mem_region(res->start, | |
1299 | res->end - res->start, | |
1300 | pdev->name); | |
1301 | ||
1302 | if (info->regs_res == NULL) { | |
1303 | dev_err(dev, "cannot claim registers\n"); | |
1304 | ret = -ENXIO; | |
1305 | goto err_release; | |
1306 | } | |
1307 | ||
1308 | info->regs = ioremap(res->start, (res->end - res->start)+1); | |
1309 | if (info->regs == NULL) { | |
1310 | dev_err(dev, "cannot remap registers\n"); | |
1311 | ret = -ENXIO; | |
1312 | goto err_regs_res; | |
1313 | } | |
1314 | ||
1315 | /* allocate, reserve resources for framebuffer */ | |
1316 | res = platform_get_resource(pdev, IORESOURCE_MEM, 2); | |
1317 | if (res == NULL) { | |
1318 | dev_err(dev, "no memory resource defined\n"); | |
1319 | ret = -ENXIO; | |
1320 | goto err_regs_map; | |
1321 | } | |
1322 | ||
1323 | info->fbmem_res = request_mem_region(res->start, | |
1324 | (res->end - res->start)+1, | |
1325 | pdev->name); | |
1326 | if (info->fbmem_res == NULL) { | |
1327 | dev_err(dev, "cannot claim framebuffer\n"); | |
1328 | ret = -ENXIO; | |
1329 | goto err_regs_map; | |
1330 | } | |
1331 | ||
1332 | info->fbmem = ioremap(res->start, (res->end - res->start)+1); | |
1333 | if (info->fbmem == NULL) { | |
1334 | dev_err(dev, "cannot remap framebuffer\n"); | |
1335 | goto err_mem_res; | |
1336 | } | |
1337 | ||
1338 | info->fbmem_len = (res->end - res->start)+1; | |
1339 | ||
1340 | /* enable display controller */ | |
1341 | sm501_unit_power(dev->parent, SM501_GATE_DISPLAY, 1); | |
1342 | ||
1343 | /* setup cursors */ | |
1344 | ||
1345 | sm501_init_cursor(info->fb[HEAD_CRT], SM501_DC_CRT_HWC_ADDR); | |
1346 | sm501_init_cursor(info->fb[HEAD_PANEL], SM501_DC_PANEL_HWC_ADDR); | |
1347 | ||
1348 | return 0; /* everything is setup */ | |
1349 | ||
1350 | err_mem_res: | |
1351 | release_resource(info->fbmem_res); | |
1352 | kfree(info->fbmem_res); | |
1353 | ||
1354 | err_regs_map: | |
1355 | iounmap(info->regs); | |
1356 | ||
1357 | err_regs_res: | |
1358 | release_resource(info->regs_res); | |
1359 | kfree(info->regs_res); | |
1360 | ||
1361 | err_release: | |
1362 | return ret; | |
1363 | } | |
1364 | ||
1365 | static void sm501fb_stop(struct sm501fb_info *info) | |
1366 | { | |
1367 | /* disable display controller */ | |
1368 | sm501_unit_power(info->dev->parent, SM501_GATE_DISPLAY, 0); | |
1369 | ||
1370 | iounmap(info->fbmem); | |
1371 | release_resource(info->fbmem_res); | |
1372 | kfree(info->fbmem_res); | |
1373 | ||
1374 | iounmap(info->regs); | |
1375 | release_resource(info->regs_res); | |
1376 | kfree(info->regs_res); | |
1377 | } | |
1378 | ||
1379 | static void sm501fb_info_release(struct sm501fb_info *info) | |
1380 | { | |
1381 | kfree(info); | |
1382 | } | |
1383 | ||
1384 | static int sm501fb_init_fb(struct fb_info *fb, | |
1385 | enum sm501_controller head, | |
1386 | const char *fbname) | |
1387 | { | |
1388 | struct sm501_platdata_fbsub *pd; | |
1389 | struct sm501fb_par *par = fb->par; | |
1390 | struct sm501fb_info *info = par->info; | |
1391 | unsigned long ctrl; | |
1392 | unsigned int enable; | |
1393 | int ret; | |
1394 | ||
1395 | switch (head) { | |
1396 | case HEAD_CRT: | |
1397 | pd = info->pdata->fb_crt; | |
1398 | ctrl = readl(info->regs + SM501_DC_CRT_CONTROL); | |
1399 | enable = (ctrl & SM501_DC_CRT_CONTROL_ENABLE) ? 1 : 0; | |
1400 | ||
1401 | /* ensure we set the correct source register */ | |
1402 | if (info->pdata->fb_route != SM501_FB_CRT_PANEL) { | |
1403 | ctrl |= SM501_DC_CRT_CONTROL_SEL; | |
1404 | writel(ctrl, info->regs + SM501_DC_CRT_CONTROL); | |
1405 | } | |
1406 | ||
1407 | break; | |
1408 | ||
1409 | case HEAD_PANEL: | |
1410 | pd = info->pdata->fb_pnl; | |
1411 | ctrl = readl(info->regs + SM501_DC_PANEL_CONTROL); | |
1412 | enable = (ctrl & SM501_DC_PANEL_CONTROL_EN) ? 1 : 0; | |
1413 | break; | |
1414 | ||
1415 | default: | |
1416 | pd = NULL; /* stop compiler warnings */ | |
1417 | ctrl = 0; | |
1418 | enable = 0; | |
1419 | BUG(); | |
1420 | } | |
1421 | ||
1422 | dev_info(info->dev, "fb %s %sabled at start\n", | |
1423 | fbname, enable ? "en" : "dis"); | |
1424 | ||
1425 | /* check to see if our routing allows this */ | |
1426 | ||
1427 | if (head == HEAD_CRT && info->pdata->fb_route == SM501_FB_CRT_PANEL) { | |
1428 | ctrl &= ~SM501_DC_CRT_CONTROL_SEL; | |
1429 | writel(ctrl, info->regs + SM501_DC_CRT_CONTROL); | |
1430 | enable = 0; | |
1431 | } | |
1432 | ||
1433 | strlcpy(fb->fix.id, fbname, sizeof(fb->fix.id)); | |
1434 | ||
1435 | memcpy(&par->ops, | |
1436 | (head == HEAD_CRT) ? &sm501fb_ops_crt : &sm501fb_ops_pnl, | |
1437 | sizeof(struct fb_ops)); | |
1438 | ||
1439 | /* update ops dependant on what we've been passed */ | |
1440 | ||
1441 | if ((pd->flags & SM501FB_FLAG_USE_HWCURSOR) == 0) | |
1442 | par->ops.fb_cursor = NULL; | |
1443 | ||
1444 | fb->fbops = &par->ops; | |
1445 | fb->flags = FBINFO_FLAG_DEFAULT | | |
1446 | FBINFO_HWACCEL_XPAN | FBINFO_HWACCEL_YPAN; | |
1447 | ||
1448 | /* fixed data */ | |
1449 | ||
1450 | fb->fix.type = FB_TYPE_PACKED_PIXELS; | |
1451 | fb->fix.type_aux = 0; | |
1452 | fb->fix.xpanstep = 1; | |
1453 | fb->fix.ypanstep = 1; | |
1454 | fb->fix.ywrapstep = 0; | |
1455 | fb->fix.accel = FB_ACCEL_NONE; | |
1456 | ||
1457 | /* screenmode */ | |
1458 | ||
1459 | fb->var.nonstd = 0; | |
1460 | fb->var.activate = FB_ACTIVATE_NOW; | |
1461 | fb->var.accel_flags = 0; | |
1462 | fb->var.vmode = FB_VMODE_NONINTERLACED; | |
1463 | fb->var.bits_per_pixel = 16; | |
1464 | ||
1465 | if (enable && (pd->flags & SM501FB_FLAG_USE_INIT_MODE) && 0) { | |
1466 | /* TODO read the mode from the current display */ | |
1467 | ||
1468 | } else { | |
1469 | if (pd->def_mode) { | |
1470 | dev_info(info->dev, "using supplied mode\n"); | |
1471 | fb_videomode_to_var(&fb->var, pd->def_mode); | |
1472 | ||
1473 | fb->var.bits_per_pixel = pd->def_bpp ? pd->def_bpp : 8; | |
1474 | fb->var.xres_virtual = fb->var.xres; | |
1475 | fb->var.yres_virtual = fb->var.yres; | |
1476 | } else { | |
1477 | ret = fb_find_mode(&fb->var, fb, | |
1478 | NULL, NULL, 0, NULL, 8); | |
1479 | ||
1480 | if (ret == 0 || ret == 4) { | |
1481 | dev_err(info->dev, | |
1482 | "failed to get initial mode\n"); | |
1483 | return -EINVAL; | |
1484 | } | |
1485 | } | |
1486 | } | |
1487 | ||
1488 | /* initialise and set the palette */ | |
1489 | fb_alloc_cmap(&fb->cmap, NR_PALETTE, 0); | |
1490 | fb_set_cmap(&fb->cmap, fb); | |
1491 | ||
1492 | ret = (fb->fbops->fb_check_var)(&fb->var, fb); | |
1493 | if (ret) | |
1494 | dev_err(info->dev, "check_var() failed on initial setup?\n"); | |
1495 | ||
1496 | /* ensure we've activated our new configuration */ | |
1497 | (fb->fbops->fb_set_par)(fb); | |
1498 | ||
1499 | return 0; | |
1500 | } | |
1501 | ||
1502 | /* default platform data if none is supplied (ie, PCI device) */ | |
1503 | ||
1504 | static struct sm501_platdata_fbsub sm501fb_pdata_crt = { | |
1505 | .flags = (SM501FB_FLAG_USE_INIT_MODE | | |
1506 | SM501FB_FLAG_USE_HWCURSOR | | |
1507 | SM501FB_FLAG_USE_HWACCEL | | |
1508 | SM501FB_FLAG_DISABLE_AT_EXIT), | |
1509 | ||
1510 | }; | |
1511 | ||
1512 | static struct sm501_platdata_fbsub sm501fb_pdata_pnl = { | |
1513 | .flags = (SM501FB_FLAG_USE_INIT_MODE | | |
1514 | SM501FB_FLAG_USE_HWCURSOR | | |
1515 | SM501FB_FLAG_USE_HWACCEL | | |
1516 | SM501FB_FLAG_DISABLE_AT_EXIT), | |
1517 | }; | |
1518 | ||
1519 | static struct sm501_platdata_fb sm501fb_def_pdata = { | |
1520 | .fb_route = SM501_FB_OWN, | |
1521 | .fb_crt = &sm501fb_pdata_crt, | |
1522 | .fb_pnl = &sm501fb_pdata_pnl, | |
1523 | }; | |
1524 | ||
1525 | static char driver_name_crt[] = "sm501fb-crt"; | |
1526 | static char driver_name_pnl[] = "sm501fb-panel"; | |
1527 | ||
1528 | static int __init sm501fb_probe(struct platform_device *pdev) | |
1529 | { | |
1530 | struct sm501fb_info *info; | |
1531 | struct device *dev = &pdev->dev; | |
1532 | struct fb_info *fbinfo_crt; | |
1533 | struct fb_info *fbinfo_pnl; | |
1534 | int ret; | |
1535 | ||
1536 | /* allocate our framebuffers */ | |
1537 | ||
1538 | fbinfo_crt = framebuffer_alloc(sizeof(struct sm501fb_par), dev); | |
1539 | if (fbinfo_crt == NULL) { | |
1540 | dev_err(dev, "cannot allocate crt framebuffer\n"); | |
1541 | return -ENOMEM; | |
1542 | } | |
1543 | ||
1544 | fbinfo_pnl = framebuffer_alloc(sizeof(struct sm501fb_par), dev); | |
1545 | if (fbinfo_pnl == NULL) { | |
1546 | dev_err(dev, "cannot allocate panel framebuffer\n"); | |
1547 | ret = -ENOMEM; | |
1548 | goto fbinfo_crt_alloc_fail; | |
1549 | } | |
1550 | ||
1551 | info = sm501fb_info_alloc(fbinfo_crt, fbinfo_pnl); | |
1552 | if (info == NULL) { | |
1553 | dev_err(dev, "cannot allocate par\n"); | |
1554 | ret = -ENOMEM; | |
1555 | goto sm501fb_alloc_fail; | |
1556 | } | |
1557 | ||
1558 | if (dev->parent->platform_data) { | |
1559 | struct sm501_platdata *pd = dev->parent->platform_data; | |
1560 | info->pdata = pd->fb; | |
1561 | } | |
1562 | ||
1563 | if (info->pdata == NULL) { | |
1564 | dev_info(dev, "using default configuration data\n"); | |
1565 | info->pdata = &sm501fb_def_pdata; | |
1566 | } | |
1567 | ||
1568 | /* start the framebuffers */ | |
1569 | ||
1570 | ret = sm501fb_start(info, pdev); | |
1571 | if (ret) { | |
1572 | dev_err(dev, "cannot initialise SM501\n"); | |
1573 | goto sm501fb_start_fail; | |
1574 | } | |
1575 | ||
1576 | /* CRT framebuffer setup */ | |
1577 | ||
1578 | ret = sm501fb_init_fb(fbinfo_crt, HEAD_CRT, driver_name_crt); | |
1579 | if (ret) { | |
1580 | dev_err(dev, "cannot initialise CRT fb\n"); | |
1581 | goto sm501fb_start_fail; | |
1582 | } | |
1583 | ||
1584 | /* Panel framebuffer setup */ | |
1585 | ||
1586 | ret = sm501fb_init_fb(fbinfo_pnl, HEAD_PANEL, driver_name_pnl); | |
1587 | if (ret) { | |
1588 | dev_err(dev, "cannot initialise Panel fb\n"); | |
1589 | goto sm501fb_start_fail; | |
1590 | } | |
1591 | ||
1592 | /* register framebuffers */ | |
1593 | ||
1594 | ret = register_framebuffer(fbinfo_crt); | |
1595 | if (ret < 0) { | |
1596 | dev_err(dev, "failed to register CRT fb (%d)\n", ret); | |
1597 | goto register_crt_fail; | |
1598 | } | |
1599 | ||
1600 | ret = register_framebuffer(fbinfo_pnl); | |
1601 | if (ret < 0) { | |
1602 | dev_err(dev, "failed to register panel fb (%d)\n", ret); | |
1603 | goto register_pnl_fail; | |
1604 | } | |
1605 | ||
1606 | dev_info(dev, "fb%d: %s frame buffer device\n", | |
1607 | fbinfo_crt->node, fbinfo_crt->fix.id); | |
1608 | ||
1609 | dev_info(dev, "fb%d: %s frame buffer device\n", | |
1610 | fbinfo_pnl->node, fbinfo_pnl->fix.id); | |
1611 | ||
1612 | /* create device files */ | |
1613 | ||
1614 | ret = device_create_file(dev, &dev_attr_crt_src); | |
1615 | if (ret) | |
1616 | goto crtsrc_fail; | |
1617 | ||
1618 | ret = device_create_file(dev, &dev_attr_fbregs_pnl); | |
1619 | if (ret) | |
1620 | goto fbregs_pnl_fail; | |
1621 | ||
1622 | ret = device_create_file(dev, &dev_attr_fbregs_crt); | |
1623 | if (ret) | |
1624 | goto fbregs_crt_fail; | |
1625 | ||
1626 | /* we registered, return ok */ | |
1627 | return 0; | |
1628 | ||
1629 | fbregs_crt_fail: | |
1630 | device_remove_file(dev, &dev_attr_fbregs_pnl); | |
1631 | ||
1632 | fbregs_pnl_fail: | |
1633 | device_remove_file(dev, &dev_attr_crt_src); | |
1634 | ||
1635 | crtsrc_fail: | |
1636 | unregister_framebuffer(fbinfo_pnl); | |
1637 | ||
1638 | register_pnl_fail: | |
1639 | unregister_framebuffer(fbinfo_crt); | |
1640 | ||
1641 | register_crt_fail: | |
1642 | sm501fb_stop(info); | |
1643 | ||
1644 | sm501fb_start_fail: | |
1645 | sm501fb_info_release(info); | |
1646 | ||
1647 | sm501fb_alloc_fail: | |
1648 | framebuffer_release(fbinfo_pnl); | |
1649 | ||
1650 | fbinfo_crt_alloc_fail: | |
1651 | framebuffer_release(fbinfo_crt); | |
1652 | ||
1653 | return ret; | |
1654 | } | |
1655 | ||
1656 | ||
1657 | /* | |
1658 | * Cleanup | |
1659 | */ | |
1660 | static int sm501fb_remove(struct platform_device *pdev) | |
1661 | { | |
1662 | struct sm501fb_info *info = platform_get_drvdata(pdev); | |
1663 | struct fb_info *fbinfo_crt = info->fb[0]; | |
1664 | struct fb_info *fbinfo_pnl = info->fb[1]; | |
1665 | ||
1666 | device_remove_file(&pdev->dev, &dev_attr_fbregs_crt); | |
1667 | device_remove_file(&pdev->dev, &dev_attr_fbregs_pnl); | |
1668 | device_remove_file(&pdev->dev, &dev_attr_crt_src); | |
1669 | ||
1670 | unregister_framebuffer(fbinfo_crt); | |
1671 | unregister_framebuffer(fbinfo_pnl); | |
1672 | ||
1673 | sm501fb_stop(info); | |
1674 | sm501fb_info_release(info); | |
1675 | ||
1676 | framebuffer_release(fbinfo_pnl); | |
1677 | framebuffer_release(fbinfo_crt); | |
1678 | ||
1679 | return 0; | |
1680 | } | |
1681 | ||
1682 | #ifdef CONFIG_PM | |
1683 | ||
1684 | static int sm501fb_suspend_fb(struct sm501fb_info *info, | |
1685 | enum sm501_controller head) | |
1686 | { | |
1687 | struct fb_info *fbi = info->fb[head]; | |
1688 | struct sm501fb_par *par = fbi->par; | |
1689 | ||
1690 | if (par->screen.size == 0) | |
1691 | return 0; | |
1692 | ||
1693 | /* backup copies in case chip is powered down over suspend */ | |
1694 | ||
1695 | par->store_fb = vmalloc(par->screen.size); | |
1696 | if (par->store_fb == NULL) { | |
1697 | dev_err(info->dev, "no memory to store screen\n"); | |
1698 | return -ENOMEM; | |
1699 | } | |
1700 | ||
1701 | par->store_cursor = vmalloc(par->cursor.size); | |
1702 | if (par->store_cursor == NULL) { | |
1703 | dev_err(info->dev, "no memory to store cursor\n"); | |
1704 | goto err_nocursor; | |
1705 | } | |
1706 | ||
c1f303bb BD |
1707 | dev_dbg(info->dev, "suspending screen to %p\n", par->store_fb); |
1708 | dev_dbg(info->dev, "suspending cursor to %p\n", par->store_cursor); | |
1709 | ||
5fc404e4 BD |
1710 | memcpy_fromio(par->store_fb, par->screen.k_addr, par->screen.size); |
1711 | memcpy_fromio(par->store_cursor, par->cursor.k_addr, par->cursor.size); | |
5fc404e4 BD |
1712 | /* blank the relevant interface to ensure unit power minimised */ |
1713 | (par->ops.fb_blank)(FB_BLANK_POWERDOWN, fbi); | |
1714 | ||
f22e521f BD |
1715 | acquire_console_sem(); |
1716 | fb_set_suspend(fbi, 1); | |
1717 | release_console_sem(); | |
1718 | ||
5fc404e4 BD |
1719 | return 0; |
1720 | ||
1721 | err_nocursor: | |
1722 | vfree(par->store_fb); | |
c1f303bb | 1723 | par->store_fb = NULL; |
5fc404e4 BD |
1724 | |
1725 | return -ENOMEM; | |
5fc404e4 BD |
1726 | } |
1727 | ||
1728 | static void sm501fb_resume_fb(struct sm501fb_info *info, | |
1729 | enum sm501_controller head) | |
1730 | { | |
1731 | struct fb_info *fbi = info->fb[head]; | |
1732 | struct sm501fb_par *par = fbi->par; | |
1733 | ||
1734 | if (par->screen.size == 0) | |
1735 | return; | |
1736 | ||
1737 | /* re-activate the configuration */ | |
1738 | ||
1739 | (par->ops.fb_set_par)(fbi); | |
1740 | ||
1741 | /* restore the data */ | |
1742 | ||
c1f303bb BD |
1743 | dev_dbg(info->dev, "restoring screen from %p\n", par->store_fb); |
1744 | dev_dbg(info->dev, "restoring cursor from %p\n", par->store_cursor); | |
1745 | ||
1746 | if (par->store_fb) | |
1747 | memcpy_toio(par->screen.k_addr, par->store_fb, | |
1748 | par->screen.size); | |
1749 | ||
1750 | if (par->store_cursor) | |
1751 | memcpy_toio(par->cursor.k_addr, par->store_cursor, | |
1752 | par->cursor.size); | |
5fc404e4 | 1753 | |
f22e521f BD |
1754 | acquire_console_sem(); |
1755 | fb_set_suspend(fbi, 0); | |
1756 | release_console_sem(); | |
1757 | ||
5fc404e4 BD |
1758 | vfree(par->store_fb); |
1759 | vfree(par->store_cursor); | |
1760 | } | |
1761 | ||
1762 | ||
1763 | /* suspend and resume support */ | |
1764 | ||
1765 | static int sm501fb_suspend(struct platform_device *pdev, pm_message_t state) | |
1766 | { | |
1767 | struct sm501fb_info *info = platform_get_drvdata(pdev); | |
1768 | ||
c1f303bb BD |
1769 | /* store crt control to resume with */ |
1770 | info->pm_crt_ctrl = readl(info->regs + SM501_DC_CRT_CONTROL); | |
1771 | ||
5fc404e4 BD |
1772 | sm501fb_suspend_fb(info, HEAD_CRT); |
1773 | sm501fb_suspend_fb(info, HEAD_PANEL); | |
1774 | ||
1775 | /* turn off the clocks, in case the device is not powered down */ | |
1776 | sm501_unit_power(info->dev->parent, SM501_GATE_DISPLAY, 0); | |
1777 | ||
1778 | return 0; | |
1779 | } | |
1780 | ||
c1f303bb BD |
1781 | #define SM501_CRT_CTRL_SAVE (SM501_DC_CRT_CONTROL_TVP | \ |
1782 | SM501_DC_CRT_CONTROL_SEL) | |
1783 | ||
1784 | ||
5fc404e4 BD |
1785 | static int sm501fb_resume(struct platform_device *pdev) |
1786 | { | |
1787 | struct sm501fb_info *info = platform_get_drvdata(pdev); | |
c1f303bb | 1788 | unsigned long crt_ctrl; |
5fc404e4 BD |
1789 | |
1790 | sm501_unit_power(info->dev->parent, SM501_GATE_DISPLAY, 1); | |
1791 | ||
c1f303bb BD |
1792 | /* restore the items we want to be saved for crt control */ |
1793 | ||
1794 | crt_ctrl = readl(info->regs + SM501_DC_CRT_CONTROL); | |
1795 | crt_ctrl &= ~SM501_CRT_CTRL_SAVE; | |
1796 | crt_ctrl |= info->pm_crt_ctrl & SM501_CRT_CTRL_SAVE; | |
1797 | writel(crt_ctrl, info->regs + SM501_DC_CRT_CONTROL); | |
1798 | ||
5fc404e4 BD |
1799 | sm501fb_resume_fb(info, HEAD_CRT); |
1800 | sm501fb_resume_fb(info, HEAD_PANEL); | |
1801 | ||
1802 | return 0; | |
1803 | } | |
1804 | ||
1805 | #else | |
1806 | #define sm501fb_suspend NULL | |
1807 | #define sm501fb_resume NULL | |
1808 | #endif | |
1809 | ||
1810 | static struct platform_driver sm501fb_driver = { | |
1811 | .probe = sm501fb_probe, | |
1812 | .remove = sm501fb_remove, | |
1813 | .suspend = sm501fb_suspend, | |
1814 | .resume = sm501fb_resume, | |
1815 | .driver = { | |
1816 | .name = "sm501-fb", | |
1817 | .owner = THIS_MODULE, | |
1818 | }, | |
1819 | }; | |
1820 | ||
9540f75b | 1821 | static int __devinit sm501fb_init(void) |
5fc404e4 BD |
1822 | { |
1823 | return platform_driver_register(&sm501fb_driver); | |
1824 | } | |
1825 | ||
1826 | static void __exit sm501fb_cleanup(void) | |
1827 | { | |
1828 | platform_driver_unregister(&sm501fb_driver); | |
1829 | } | |
1830 | ||
1831 | module_init(sm501fb_init); | |
1832 | module_exit(sm501fb_cleanup); | |
1833 | ||
1834 | MODULE_AUTHOR("Ben Dooks, Vincent Sanders"); | |
1835 | MODULE_DESCRIPTION("SM501 Framebuffer driver"); | |
1836 | MODULE_LICENSE("GPL v2"); |