]>
Commit | Line | Data |
---|---|---|
473cf939 JC |
1 | /* |
2 | * Ralink RT288x/RT3xxx/MT76xx built-in hardware watchdog timer | |
3 | * | |
4 | * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> | |
5 | * Copyright (C) 2013 John Crispin <blogic@openwrt.org> | |
6 | * | |
7 | * This driver was based on: drivers/watchdog/softdog.c | |
8 | * | |
9 | * This program is free software; you can redistribute it and/or modify it | |
10 | * under the terms of the GNU General Public License version 2 as published | |
11 | * by the Free Software Foundation. | |
12 | */ | |
13 | ||
14 | #include <linux/clk.h> | |
15 | #include <linux/reset.h> | |
16 | #include <linux/module.h> | |
17 | #include <linux/kernel.h> | |
18 | #include <linux/watchdog.h> | |
473cf939 JC |
19 | #include <linux/moduleparam.h> |
20 | #include <linux/platform_device.h> | |
21 | ||
22 | #include <asm/mach-ralink/ralink_regs.h> | |
23 | ||
24 | #define SYSC_RSTSTAT 0x38 | |
25 | #define WDT_RST_CAUSE BIT(1) | |
26 | ||
27 | #define RALINK_WDT_TIMEOUT 30 | |
28 | #define RALINK_WDT_PRESCALE 65536 | |
29 | ||
30 | #define TIMER_REG_TMR1LOAD 0x00 | |
31 | #define TIMER_REG_TMR1CTL 0x08 | |
32 | ||
33 | #define TMRSTAT_TMR1RST BIT(5) | |
34 | ||
35 | #define TMR1CTL_ENABLE BIT(7) | |
36 | #define TMR1CTL_MODE_SHIFT 4 | |
37 | #define TMR1CTL_MODE_MASK 0x3 | |
38 | #define TMR1CTL_MODE_FREE_RUNNING 0x0 | |
39 | #define TMR1CTL_MODE_PERIODIC 0x1 | |
40 | #define TMR1CTL_MODE_TIMEOUT 0x2 | |
41 | #define TMR1CTL_MODE_WDT 0x3 | |
42 | #define TMR1CTL_PRESCALE_MASK 0xf | |
43 | #define TMR1CTL_PRESCALE_65536 0xf | |
44 | ||
45 | static struct clk *rt288x_wdt_clk; | |
46 | static unsigned long rt288x_wdt_freq; | |
47 | static void __iomem *rt288x_wdt_base; | |
48 | ||
49 | static bool nowayout = WATCHDOG_NOWAYOUT; | |
50 | module_param(nowayout, bool, 0); | |
51 | MODULE_PARM_DESC(nowayout, | |
52 | "Watchdog cannot be stopped once started (default=" | |
53 | __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); | |
54 | ||
55 | static inline void rt_wdt_w32(unsigned reg, u32 val) | |
56 | { | |
57 | iowrite32(val, rt288x_wdt_base + reg); | |
58 | } | |
59 | ||
60 | static inline u32 rt_wdt_r32(unsigned reg) | |
61 | { | |
62 | return ioread32(rt288x_wdt_base + reg); | |
63 | } | |
64 | ||
65 | static int rt288x_wdt_ping(struct watchdog_device *w) | |
66 | { | |
67 | rt_wdt_w32(TIMER_REG_TMR1LOAD, w->timeout * rt288x_wdt_freq); | |
68 | ||
69 | return 0; | |
70 | } | |
71 | ||
72 | static int rt288x_wdt_start(struct watchdog_device *w) | |
73 | { | |
74 | u32 t; | |
75 | ||
76 | t = rt_wdt_r32(TIMER_REG_TMR1CTL); | |
77 | t &= ~(TMR1CTL_MODE_MASK << TMR1CTL_MODE_SHIFT | | |
78 | TMR1CTL_PRESCALE_MASK); | |
79 | t |= (TMR1CTL_MODE_WDT << TMR1CTL_MODE_SHIFT | | |
80 | TMR1CTL_PRESCALE_65536); | |
81 | rt_wdt_w32(TIMER_REG_TMR1CTL, t); | |
82 | ||
83 | rt288x_wdt_ping(w); | |
84 | ||
85 | t = rt_wdt_r32(TIMER_REG_TMR1CTL); | |
86 | t |= TMR1CTL_ENABLE; | |
87 | rt_wdt_w32(TIMER_REG_TMR1CTL, t); | |
88 | ||
89 | return 0; | |
90 | } | |
91 | ||
92 | static int rt288x_wdt_stop(struct watchdog_device *w) | |
93 | { | |
94 | u32 t; | |
95 | ||
96 | rt288x_wdt_ping(w); | |
97 | ||
98 | t = rt_wdt_r32(TIMER_REG_TMR1CTL); | |
99 | t &= ~TMR1CTL_ENABLE; | |
100 | rt_wdt_w32(TIMER_REG_TMR1CTL, t); | |
101 | ||
102 | return 0; | |
103 | } | |
104 | ||
105 | static int rt288x_wdt_set_timeout(struct watchdog_device *w, unsigned int t) | |
106 | { | |
107 | w->timeout = t; | |
108 | rt288x_wdt_ping(w); | |
109 | ||
110 | return 0; | |
111 | } | |
112 | ||
113 | static int rt288x_wdt_bootcause(void) | |
114 | { | |
115 | if (rt_sysc_r32(SYSC_RSTSTAT) & WDT_RST_CAUSE) | |
116 | return WDIOF_CARDRESET; | |
117 | ||
118 | return 0; | |
119 | } | |
120 | ||
121 | static struct watchdog_info rt288x_wdt_info = { | |
122 | .identity = "Ralink Watchdog", | |
123 | .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, | |
124 | }; | |
125 | ||
126 | static struct watchdog_ops rt288x_wdt_ops = { | |
127 | .owner = THIS_MODULE, | |
128 | .start = rt288x_wdt_start, | |
129 | .stop = rt288x_wdt_stop, | |
130 | .ping = rt288x_wdt_ping, | |
131 | .set_timeout = rt288x_wdt_set_timeout, | |
132 | }; | |
133 | ||
134 | static struct watchdog_device rt288x_wdt_dev = { | |
135 | .info = &rt288x_wdt_info, | |
136 | .ops = &rt288x_wdt_ops, | |
137 | .min_timeout = 1, | |
138 | }; | |
139 | ||
140 | static int rt288x_wdt_probe(struct platform_device *pdev) | |
141 | { | |
142 | struct resource *res; | |
143 | int ret; | |
144 | ||
145 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
0859ffc3 | 146 | rt288x_wdt_base = devm_ioremap_resource(&pdev->dev, res); |
473cf939 JC |
147 | if (IS_ERR(rt288x_wdt_base)) |
148 | return PTR_ERR(rt288x_wdt_base); | |
149 | ||
150 | rt288x_wdt_clk = devm_clk_get(&pdev->dev, NULL); | |
151 | if (IS_ERR(rt288x_wdt_clk)) | |
152 | return PTR_ERR(rt288x_wdt_clk); | |
153 | ||
154 | device_reset(&pdev->dev); | |
155 | ||
156 | rt288x_wdt_freq = clk_get_rate(rt288x_wdt_clk) / RALINK_WDT_PRESCALE; | |
157 | ||
158 | rt288x_wdt_dev.dev = &pdev->dev; | |
159 | rt288x_wdt_dev.bootstatus = rt288x_wdt_bootcause(); | |
160 | ||
161 | rt288x_wdt_dev.max_timeout = (0xfffful / rt288x_wdt_freq); | |
162 | rt288x_wdt_dev.timeout = rt288x_wdt_dev.max_timeout; | |
163 | ||
164 | watchdog_set_nowayout(&rt288x_wdt_dev, nowayout); | |
165 | ||
166 | ret = watchdog_register_device(&rt288x_wdt_dev); | |
167 | if (!ret) | |
168 | dev_info(&pdev->dev, "Initialized\n"); | |
169 | ||
170 | return 0; | |
171 | } | |
172 | ||
173 | static int rt288x_wdt_remove(struct platform_device *pdev) | |
174 | { | |
175 | watchdog_unregister_device(&rt288x_wdt_dev); | |
176 | ||
177 | return 0; | |
178 | } | |
179 | ||
180 | static void rt288x_wdt_shutdown(struct platform_device *pdev) | |
181 | { | |
182 | rt288x_wdt_stop(&rt288x_wdt_dev); | |
183 | } | |
184 | ||
185 | static const struct of_device_id rt288x_wdt_match[] = { | |
186 | { .compatible = "ralink,rt2880-wdt" }, | |
187 | {}, | |
188 | }; | |
189 | MODULE_DEVICE_TABLE(of, rt288x_wdt_match); | |
190 | ||
191 | static struct platform_driver rt288x_wdt_driver = { | |
192 | .probe = rt288x_wdt_probe, | |
193 | .remove = rt288x_wdt_remove, | |
194 | .shutdown = rt288x_wdt_shutdown, | |
195 | .driver = { | |
196 | .name = KBUILD_MODNAME, | |
197 | .owner = THIS_MODULE, | |
198 | .of_match_table = rt288x_wdt_match, | |
199 | }, | |
200 | }; | |
201 | ||
202 | module_platform_driver(rt288x_wdt_driver); | |
203 | ||
204 | MODULE_DESCRIPTION("MediaTek/Ralink RT288x/RT3xxx hardware watchdog driver"); | |
205 | MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org"); | |
206 | MODULE_LICENSE("GPL v2"); |