]> git.proxmox.com Git - mirror_qemu.git/blame - hw/arm/nseries.c
projects / mirror_qemu.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20190903' into staging
[mirror_qemu.git] / hw / arm / nseries.c
CommitLineData
7e7c5e4c
AZ		 1/*
2 * Nokia N-series internet tablets.
3 *
4 * Copyright (C) 2007 Nokia Corporation
5 * Written by Andrzej Zaborowski <andrew@openedhand.com>
6 *
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License as
9 * published by the Free Software Foundation; either version 2 or
10 * (at your option) version 3 of the License.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
fad6cb1a 17 * You should have received a copy of the GNU General Public License along
8167ee88 18 * with this program; if not, see <http://www.gnu.org/licenses/>.
7e7c5e4c
AZ		 19 */
20
12b16722 21#include "qemu/osdep.h"
da34e65c 22#include "qapi/error.h"
33c11879 23#include "cpu.h"
f348b6d1 24#include "qemu/cutils.h"
58369e22 25#include "qemu/bswap.h"
71e8a915 26#include "sysemu/reset.h"
54d31236 27#include "sysemu/runstate.h"
9c17d615 28#include "sysemu/sysemu.h"
0d09e41a 29#include "hw/arm/omap.h"
12ec8bd5 30#include "hw/arm/boot.h"
83c9f4ca 31#include "hw/irq.h"
28ecbaee 32#include "ui/console.h"
83c9f4ca 33#include "hw/boards.h"
0d09e41a 34#include "hw/i2c/i2c.h"
8a08cc71 35#include "hw/display/blizzard.h"
a331dd02 36#include "hw/input/tsc2xxx.h"
e8fa3958 37#include "hw/misc/cbus.h"
5f299c55 38#include "hw/misc/tmp105.h"
a27bd6c7 39#include "hw/qdev-properties.h"
0d09e41a 40#include "hw/block/flash.h"
83c9f4ca
PB		 41#include "hw/hw.h"
42#include "hw/bt.h"
43#include "hw/loader.h"
83c9f4ca 44#include "hw/sysbus.h"
03dd024f 45#include "qemu/log.h"
022c62cb 46#include "exec/address-spaces.h"
7e7c5e4c
AZ		 47
48/* Nokia N8x0 support */
49struct n800_s {
518ec134 50 struct omap_mpu_state_s *mpu;
7e7c5e4c
AZ		 51
52 struct rfbi_chip_s blizzard;
e927bb00
AZ		 53 struct {
54 void *opaque;
55 uint32_t (*txrx)(void *opaque, uint32_t value, int len);
bc24a225 56 uWireSlave *chip;
e927bb00 57 } ts;
7e7c5e4c
AZ		 58
59 int keymap[0x80];
c4f05c8c 60 DeviceState *kbd;
7e7c5e4c 61
bdc76462 62 DeviceState *usb;
7e7c5e4c
AZ		 63 void *retu;
64 void *tahvo;
500954e3 65 DeviceState *nand;
7e7c5e4c
AZ		 66};
67
68/* GPIO pins */
e927bb00 69#define N8X0_TUSB_ENABLE_GPIO 0
7e7c5e4c
AZ		 70#define N800_MMC2_WP_GPIO 8
71#define N800_UNKNOWN_GPIO0 9 /* out */
0941041e 72#define N810_MMC2_VIOSD_GPIO 9
99570a40 73#define N810_HEADSET_AMP_GPIO 10
7e7c5e4c 74#define N800_CAM_TURN_GPIO 12
e927bb00 75#define N810_GPS_RESET_GPIO 12
7e7c5e4c
AZ		 76#define N800_BLIZZARD_POWERDOWN_GPIO 15
77#define N800_MMC1_WP_GPIO 23
0941041e 78#define N810_MMC2_VSD_GPIO 23
7e7c5e4c 79#define N8X0_ONENAND_GPIO 26
e927bb00 80#define N810_BLIZZARD_RESET_GPIO 30
7e7c5e4c
AZ		 81#define N800_UNKNOWN_GPIO2 53 /* out */
82#define N8X0_TUSB_INT_GPIO 58
e927bb00
AZ		 83#define N8X0_BT_WKUP_GPIO 61
84#define N8X0_STI_GPIO 62
7e7c5e4c 85#define N8X0_CBUS_SEL_GPIO 64
e927bb00
AZ		 86#define N8X0_CBUS_DAT_GPIO 65
87#define N8X0_CBUS_CLK_GPIO 66
88#define N8X0_WLAN_IRQ_GPIO 87
89#define N8X0_BT_RESET_GPIO 92
90#define N8X0_TEA5761_CS_GPIO 93
7e7c5e4c 91#define N800_UNKNOWN_GPIO 94
e927bb00 92#define N810_TSC_RESET_GPIO 94
7e7c5e4c 93#define N800_CAM_ACT_GPIO 95
e927bb00
AZ		 94#define N810_GPS_WAKEUP_GPIO 95
95#define N8X0_MMC_CS_GPIO 96
96#define N8X0_WLAN_PWR_GPIO 97
7e7c5e4c 97#define N8X0_BT_HOST_WKUP_GPIO 98
99570a40 98#define N810_SPEAKER_AMP_GPIO 101
7e7c5e4c
AZ		 99#define N810_KB_LOCK_GPIO 102
100#define N800_TSC_TS_GPIO 103
e927bb00
AZ		 101#define N810_TSC_TS_GPIO 106
102#define N8X0_HEADPHONE_GPIO 107
7e7c5e4c
AZ		 103#define N8X0_RETU_GPIO 108
104#define N800_TSC_KP_IRQ_GPIO 109
105#define N810_KEYBOARD_GPIO 109
106#define N800_BAT_COVER_GPIO 110
107#define N810_SLIDE_GPIO 110
108#define N8X0_TAHVO_GPIO 111
109#define N800_UNKNOWN_GPIO4 112 /* out */
e927bb00 110#define N810_SLEEPX_LED_GPIO 112
1d4e547b 111#define N800_TSC_RESET_GPIO 118 /* ? */
99570a40 112#define N810_AIC33_RESET_GPIO 118
1d4e547b 113#define N800_TSC_UNKNOWN_GPIO 119 /* out */
7e7c5e4c
AZ		 114#define N8X0_TMP105_GPIO 125
115
116/* Config */
c580d92b 117#define BT_UART 0
7e7c5e4c
AZ		 118#define XLDR_LL_UART 1
119
1d4e547b
AZ		 120/* Addresses on the I2C bus 0 */
121#define N810_TLV320AIC33_ADDR 0x18 /* Audio CODEC */
122#define N8X0_TCM825x_ADDR 0x29 /* Camera */
123#define N810_LP5521_ADDR 0x32 /* LEDs */
124#define N810_TSL2563_ADDR 0x3d /* Light sensor */
125#define N810_LM8323_ADDR 0x45 /* Keyboard */
126/* Addresses on the I2C bus 1 */
127#define N8X0_TMP105_ADDR 0x48 /* Temperature sensor */
128#define N8X0_MENELAUS_ADDR 0x72 /* Power management */
7e7c5e4c
AZ		 129
130/* Chipselects on GPMC NOR interface */
131#define N8X0_ONENAND_CS 0
132#define N8X0_USB_ASYNC_CS 1
133#define N8X0_USB_SYNC_CS 4
134
c580d92b
AZ		 135#define N8X0_BD_ADDR 0x00, 0x1a, 0x89, 0x9e, 0x3e, 0x81
136
7e7c5e4c
AZ		 137static void n800_mmc_cs_cb(void *opaque, int line, int level)
138{
139 /* TODO: this seems to actually be connected to the menelaus, to
140 * which also both MMC slots connect. */
141 omap_mmc_enable((struct omap_mmc_s *) opaque, !level);
7e7c5e4c
AZ		 142}
143
e927bb00 144static void n8x0_gpio_setup(struct n800_s *s)
7e7c5e4c 145{
294972ce
SZ		 146 qdev_connect_gpio_out(s->mpu->gpio, N8X0_MMC_CS_GPIO,
147 qemu_allocate_irq(n800_mmc_cs_cb, s->mpu->mmc, 0));
518ec134 148 qemu_irq_lower(qdev_get_gpio_in(s->mpu->gpio, N800_BAT_COVER_GPIO));
7e7c5e4c
AZ		 149}
150
c580d92b
AZ		 151#define MAEMO_CAL_HEADER(...) \
152 'C', 'o', 'n', 'F', 0x02, 0x00, 0x04, 0x00, \
153 __VA_ARGS__, \
154 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
155
156static const uint8_t n8x0_cal_wlan_mac[] = {
157 MAEMO_CAL_HEADER('w', 'l', 'a', 'n', '-', 'm', 'a', 'c')
158 0x1c, 0x00, 0x00, 0x00, 0x47, 0xd6, 0x69, 0xb3,
159 0x30, 0x08, 0xa0, 0x83, 0x00, 0x00, 0x00, 0x00,
160 0x00, 0x00, 0x00, 0x00, 0x1a, 0x00, 0x00, 0x00,
161 0x89, 0x00, 0x00, 0x00, 0x9e, 0x00, 0x00, 0x00,
162 0x5d, 0x00, 0x00, 0x00, 0xc1, 0x00, 0x00, 0x00,
163};
164
165static const uint8_t n8x0_cal_bt_id[] = {
166 MAEMO_CAL_HEADER('b', 't', '-', 'i', 'd', 0, 0, 0)
167 0x0a, 0x00, 0x00, 0x00, 0xa3, 0x4b, 0xf6, 0x96,
168 0xa8, 0xeb, 0xb2, 0x41, 0x00, 0x00, 0x00, 0x00,
169 N8X0_BD_ADDR,
170};
171
7e7c5e4c
AZ		 172static void n8x0_nand_setup(struct n800_s *s)
173{
c580d92b 174 char *otp_region;
af5a75f4 175 DriveInfo *dinfo;
c580d92b 176
500954e3
JR		 177 s->nand = qdev_create(NULL, "onenand");
178 qdev_prop_set_uint16(s->nand, "manufacturer_id", NAND_MFR_SAMSUNG);
5923ba42 179 /* Either 0x40 or 0x48 are OK for the device ID */
500954e3
JR		 180 qdev_prop_set_uint16(s->nand, "device_id", 0x48);
181 qdev_prop_set_uint16(s->nand, "version_id", 0);
182 qdev_prop_set_int32(s->nand, "shift", 1);
183 dinfo = drive_get(IF_MTD, 0, 0);
fa1d36df 184 if (dinfo) {
6231a6da
MA		 185 qdev_prop_set_drive(s->nand, "drive", blk_by_legacy_dinfo(dinfo),
186 &error_fatal);
500954e3
JR		 187 }
188 qdev_init_nofail(s->nand);
1356b98d 189 sysbus_connect_irq(SYS_BUS_DEVICE(s->nand), 0,
518ec134
AF		 190 qdev_get_gpio_in(s->mpu->gpio, N8X0_ONENAND_GPIO));
191 omap_gpmc_attach(s->mpu->gpmc, N8X0_ONENAND_CS,
1356b98d 192 sysbus_mmio_get_region(SYS_BUS_DEVICE(s->nand), 0));
c580d92b
AZ		 193 otp_region = onenand_raw_otp(s->nand);
194
195 memcpy(otp_region + 0x000, n8x0_cal_wlan_mac, sizeof(n8x0_cal_wlan_mac));
196 memcpy(otp_region + 0x800, n8x0_cal_bt_id, sizeof(n8x0_cal_bt_id));
197 /* XXX: in theory should also update the OOB for both pages */
7e7c5e4c
AZ		 198}
199
c72ddb1e
IM		 200static qemu_irq n8x0_system_powerdown;
201
202static void n8x0_powerdown_req(Notifier *n, void *opaque)
203{
204 qemu_irq_raise(n8x0_system_powerdown);
205}
206
207static Notifier n8x0_system_powerdown_notifier = {
208 .notify = n8x0_powerdown_req
209};
210
e927bb00 211static void n8x0_i2c_setup(struct n800_s *s)
7e7c5e4c 212{
697454eb 213 DeviceState *dev;
518ec134 214 qemu_irq tmp_irq = qdev_get_gpio_in(s->mpu->gpio, N8X0_TMP105_GPIO);
a5c82852 215 I2CBus *i2c = omap_i2c_bus(s->mpu->i2c[0]);
7e7c5e4c
AZ		 216
217 /* Attach a menelaus PM chip */
54e17933 218 dev = i2c_create_slave(i2c, "twl92230", N8X0_MENELAUS_ADDR);
0919ac78 219 qdev_connect_gpio_out(dev, 3,
518ec134 220 qdev_get_gpio_in(s->mpu->ih[0],
0919ac78 221 OMAP_INT_24XX_SYS_NIRQ));
7e7c5e4c 222
c72ddb1e
IM		 223 n8x0_system_powerdown = qdev_get_gpio_in(dev, 3);
224 qemu_register_powerdown_notifier(&n8x0_system_powerdown_notifier);
dd4427a6 225
7e7c5e4c 226 /* Attach a TMP105 PM chip (A0 wired to ground) */
5f299c55 227 dev = i2c_create_slave(i2c, TYPE_TMP105, N8X0_TMP105_ADDR);
697454eb 228 qdev_connect_gpio_out(dev, 0, tmp_irq);
7e7c5e4c
AZ		 229}
230
231/* Touchscreen and keypad controller */
bc24a225 232static MouseTransformInfo n800_pointercal = {
e927bb00
AZ		 233 .x = 800,
234 .y = 480,
235 .a = { 14560, -68, -3455208, -39, -9621, 35152972, 65536 },
236};
237
bc24a225 238static MouseTransformInfo n810_pointercal = {
e927bb00
AZ		 239 .x = 800,
240 .y = 480,
241 .a = { 15041, 148, -4731056, 171, -10238, 35933380, 65536 },
242};
243
7e7c5e4c
AZ		 244#define RETU_KEYCODE 61 /* F3 */
245
246static void n800_key_event(void *opaque, int keycode)
247{
248 struct n800_s *s = (struct n800_s *) opaque;
249 int code = s->keymap[keycode & 0x7f];
250
251 if (code == -1) {
fddbd80c 252 if ((keycode & 0x7f) == RETU_KEYCODE) {
7e7c5e4c 253 retu_key_event(s->retu, !(keycode & 0x80));
fddbd80c 254 }
7e7c5e4c
AZ		 255 return;
256 }
257
e927bb00 258 tsc210x_key_event(s->ts.chip, code, !(keycode & 0x80));
7e7c5e4c
AZ		 259}
260
261static const int n800_keys[16] = {
262 -1,
263 72, /* Up */
264 63, /* Home (F5) */
265 -1,
266 75, /* Left */
267 28, /* Enter */
268 77, /* Right */
269 -1,
1d4e547b 270 1, /* Cycle (ESC) */
7e7c5e4c
AZ		 271 80, /* Down */
272 62, /* Menu (F4) */
273 -1,
274 66, /* Zoom- (F8) */
1d4e547b 275 64, /* FullScreen (F6) */
7e7c5e4c
AZ		 276 65, /* Zoom+ (F7) */
277 -1,
278};
279
e927bb00 280static void n800_tsc_kbd_setup(struct n800_s *s)
7e7c5e4c
AZ		 281{
282 int i;
283
284 /* XXX: are the three pins inverted inside the chip between the
285 * tsc and the cpu (N4111)? */
b9d38e95 286 qemu_irq penirq = NULL; /* NC */
518ec134
AF		 287 qemu_irq kbirq = qdev_get_gpio_in(s->mpu->gpio, N800_TSC_KP_IRQ_GPIO);
288 qemu_irq dav = qdev_get_gpio_in(s->mpu->gpio, N800_TSC_TS_GPIO);
7e7c5e4c 289
22d83b14 290 s->ts.chip = tsc2301_init(penirq, kbirq, dav);
e927bb00
AZ		 291 s->ts.opaque = s->ts.chip->opaque;
292 s->ts.txrx = tsc210x_txrx;
7e7c5e4c 293
fddbd80c 294 for (i = 0; i < 0x80; i++) {
7e7c5e4c 295 s->keymap[i] = -1;
fddbd80c
PB		 296 }
297 for (i = 0; i < 0x10; i++) {
298 if (n800_keys[i] >= 0) {
7e7c5e4c 299 s->keymap[n800_keys[i]] = i;
fddbd80c
PB		 300 }
301 }
7e7c5e4c
AZ		 302
303 qemu_add_kbd_event_handler(n800_key_event, s);
304
e927bb00
AZ		 305 tsc210x_set_transform(s->ts.chip, &n800_pointercal);
306}
307
308static void n810_tsc_setup(struct n800_s *s)
309{
518ec134 310 qemu_irq pintdav = qdev_get_gpio_in(s->mpu->gpio, N810_TSC_TS_GPIO);
e927bb00
AZ		 311
312 s->ts.opaque = tsc2005_init(pintdav);
313 s->ts.txrx = tsc2005_txrx;
314
315 tsc2005_set_transform(s->ts.opaque, &n810_pointercal);
7e7c5e4c
AZ		 316}
317
1d4e547b
AZ		 318/* N810 Keyboard controller */
319static void n810_key_event(void *opaque, int keycode)
320{
321 struct n800_s *s = (struct n800_s *) opaque;
322 int code = s->keymap[keycode & 0x7f];
323
324 if (code == -1) {
fddbd80c 325 if ((keycode & 0x7f) == RETU_KEYCODE) {
1d4e547b 326 retu_key_event(s->retu, !(keycode & 0x80));
fddbd80c 327 }
1d4e547b
AZ		 328 return;
329 }
330
331 lm832x_key_event(s->kbd, code, !(keycode & 0x80));
332}
333
334#define M 0
335
336static int n810_keys[0x80] = {
337 [0x01] = 16, /* Q */
338 [0x02] = 37, /* K */
339 [0x03] = 24, /* O */
340 [0x04] = 25, /* P */
341 [0x05] = 14, /* Backspace */
342 [0x06] = 30, /* A */
343 [0x07] = 31, /* S */
344 [0x08] = 32, /* D */
345 [0x09] = 33, /* F */
346 [0x0a] = 34, /* G */
347 [0x0b] = 35, /* H */
348 [0x0c] = 36, /* J */
349
350 [0x11] = 17, /* W */
351 [0x12] = 62, /* Menu (F4) */
352 [0x13] = 38, /* L */
353 [0x14] = 40, /* ' (Apostrophe) */
354 [0x16] = 44, /* Z */
355 [0x17] = 45, /* X */
356 [0x18] = 46, /* C */
357 [0x19] = 47, /* V */
358 [0x1a] = 48, /* B */
359 [0x1b] = 49, /* N */
360 [0x1c] = 42, /* Shift (Left shift) */
361 [0x1f] = 65, /* Zoom+ (F7) */
362
363 [0x21] = 18, /* E */
364 [0x22] = 39, /* ; (Semicolon) */
365 [0x23] = 12, /* - (Minus) */
366 [0x24] = 13, /* = (Equal) */
367 [0x2b] = 56, /* Fn (Left Alt) */
368 [0x2c] = 50, /* M */
369 [0x2f] = 66, /* Zoom- (F8) */
370
371 [0x31] = 19, /* R */
372 [0x32] = 29 | M, /* Right Ctrl */
373 [0x34] = 57, /* Space */
374 [0x35] = 51, /* , (Comma) */
375 [0x37] = 72 | M, /* Up */
376 [0x3c] = 82 | M, /* Compose (Insert) */
377 [0x3f] = 64, /* FullScreen (F6) */
378
379 [0x41] = 20, /* T */
380 [0x44] = 52, /* . (Dot) */
381 [0x46] = 77 | M, /* Right */
382 [0x4f] = 63, /* Home (F5) */
383 [0x51] = 21, /* Y */
384 [0x53] = 80 | M, /* Down */
385 [0x55] = 28, /* Enter */
386 [0x5f] = 1, /* Cycle (ESC) */
387
388 [0x61] = 22, /* U */
389 [0x64] = 75 | M, /* Left */
390
391 [0x71] = 23, /* I */
392#if 0
393 [0x75] = 28 | M, /* KP Enter (KP Enter) */
394#else
395 [0x75] = 15, /* KP Enter (Tab) */
396#endif
397};
398
399#undef M
400
401static void n810_kbd_setup(struct n800_s *s)
402{
518ec134 403 qemu_irq kbd_irq = qdev_get_gpio_in(s->mpu->gpio, N810_KEYBOARD_GPIO);
1d4e547b
AZ		 404 int i;
405
fddbd80c 406 for (i = 0; i < 0x80; i++) {
1d4e547b 407 s->keymap[i] = -1;
fddbd80c
PB		 408 }
409 for (i = 0; i < 0x80; i++) {
410 if (n810_keys[i] > 0) {
1d4e547b 411 s->keymap[n810_keys[i]] = i;
fddbd80c
PB		 412 }
413 }
1d4e547b
AZ		 414
415 qemu_add_kbd_event_handler(n810_key_event, s);
416
417 /* Attach the LM8322 keyboard to the I2C bus,
418 * should happen in n8x0_i2c_setup and s->kbd be initialised here. */
518ec134 419 s->kbd = i2c_create_slave(omap_i2c_bus(s->mpu->i2c[0]),
54e17933 420 "lm8323", N810_LM8323_ADDR);
c4f05c8c 421 qdev_connect_gpio_out(s->kbd, 0, kbd_irq);
1d4e547b
AZ		 422}
423
7e7c5e4c
AZ		 424/* LCD MIPI DBI-C controller (URAL) */
425struct mipid_s {
426 int resp[4];
427 int param[4];
428 int p;
429 int pm;
430 int cmd;
431
432 int sleep;
433 int booster;
434 int te;
435 int selfcheck;
436 int partial;
437 int normal;
438 int vscr;
439 int invert;
440 int onoff;
441 int gamma;
442 uint32_t id;
443};
444
445static void mipid_reset(struct mipid_s *s)
446{
7e7c5e4c
AZ		 447 s->pm = 0;
448 s->cmd = 0;
449
450 s->sleep = 1;
451 s->booster = 0;
452 s->selfcheck =
453 (1 << 7) | /* Register loading OK. */
454 (1 << 5) | /* The chip is attached. */
455 (1 << 4); /* Display glass still in one piece. */
456 s->te = 0;
457 s->partial = 0;
458 s->normal = 1;
459 s->vscr = 0;
460 s->invert = 0;
461 s->onoff = 1;
462 s->gamma = 0;
463}
464
e927bb00 465static uint32_t mipid_txrx(void *opaque, uint32_t cmd, int len)
7e7c5e4c
AZ		 466{
467 struct mipid_s *s = (struct mipid_s *) opaque;
468 uint8_t ret;
469
fddbd80c 470 if (len > 9) {
a89f364a 471 hw_error("%s: FIXME: bad SPI word width %i\n", __func__, len);
fddbd80c 472 }
e927bb00 473
fddbd80c 474 if (s->p >= ARRAY_SIZE(s->resp)) {
7e7c5e4c 475 ret = 0;
fddbd80c
PB		 476 } else {
477 ret = s->resp[s->p++];
478 }
479 if (s->pm-- > 0) {
7e7c5e4c 480 s->param[s->pm] = cmd;
fddbd80c 481 } else {
7e7c5e4c 482 s->cmd = cmd;
fddbd80c 483 }
7e7c5e4c
AZ		 484
485 switch (s->cmd) {
486 case 0x00: /* NOP */
487 break;
488
489 case 0x01: /* SWRESET */
490 mipid_reset(s);
491 break;
492
493 case 0x02: /* BSTROFF */
494 s->booster = 0;
495 break;
496 case 0x03: /* BSTRON */
497 s->booster = 1;
498 break;
499
500 case 0x04: /* RDDID */
501 s->p = 0;
502 s->resp[0] = (s->id >> 16) & 0xff;
503 s->resp[1] = (s->id >> 8) & 0xff;
504 s->resp[2] = (s->id >> 0) & 0xff;
505 break;
506
507 case 0x06: /* RD_RED */
508 case 0x07: /* RD_GREEN */
509 /* XXX the bootloader sometimes issues RD_BLUE meaning RDDID so
510 * for the bootloader one needs to change this. */
511 case 0x08: /* RD_BLUE */
512 s->p = 0;
513 /* TODO: return first pixel components */
514 s->resp[0] = 0x01;
515 break;
516
517 case 0x09: /* RDDST */
518 s->p = 0;
519 s->resp[0] = s->booster << 7;
520 s->resp[1] = (5 << 4) | (s->partial << 2) |
521 (s->sleep << 1) | s->normal;
522 s->resp[2] = (s->vscr << 7) | (s->invert << 5) |
523 (s->onoff << 2) | (s->te << 1) | (s->gamma >> 2);
524 s->resp[3] = s->gamma << 6;
525 break;
526
527 case 0x0a: /* RDDPM */
528 s->p = 0;
529 s->resp[0] = (s->onoff << 2) | (s->normal << 3) | (s->sleep << 4) |
530 (s->partial << 5) | (s->sleep << 6) | (s->booster << 7);
531 break;
532 case 0x0b: /* RDDMADCTR */
533 s->p = 0;
534 s->resp[0] = 0;
535 break;
536 case 0x0c: /* RDDCOLMOD */
537 s->p = 0;
538 s->resp[0] = 5; /* 65K colours */
539 break;
540 case 0x0d: /* RDDIM */
541 s->p = 0;
542 s->resp[0] = (s->invert << 5) | (s->vscr << 7) | s->gamma;
543 break;
544 case 0x0e: /* RDDSM */
545 s->p = 0;
546 s->resp[0] = s->te << 7;
547 break;
548 case 0x0f: /* RDDSDR */
549 s->p = 0;
550 s->resp[0] = s->selfcheck;
551 break;
552
553 case 0x10: /* SLPIN */
554 s->sleep = 1;
555 break;
556 case 0x11: /* SLPOUT */
557 s->sleep = 0;
558 s->selfcheck ^= 1 << 6; /* POFF self-diagnosis Ok */
559 break;
560
561 case 0x12: /* PTLON */
562 s->partial = 1;
563 s->normal = 0;
564 s->vscr = 0;
565 break;
566 case 0x13: /* NORON */
567 s->partial = 0;
568 s->normal = 1;
569 s->vscr = 0;
570 break;
571
572 case 0x20: /* INVOFF */
573 s->invert = 0;
574 break;
575 case 0x21: /* INVON */
576 s->invert = 1;
577 break;
578
579 case 0x22: /* APOFF */
580 case 0x23: /* APON */
581 goto bad_cmd;
582
583 case 0x25: /* WRCNTR */
fddbd80c 584 if (s->pm < 0) {
7e7c5e4c 585 s->pm = 1;
fddbd80c 586 }
7e7c5e4c
AZ		 587 goto bad_cmd;
588
589 case 0x26: /* GAMSET */
fddbd80c 590 if (!s->pm) {
ad5f5fdc
SH		 591 s->gamma = ctz32(s->param[0] & 0xf);
592 if (s->gamma == 32) {
593 s->gamma = -1; /* XXX: should this be 0? */
594 }
fddbd80c 595 } else if (s->pm < 0) {
7e7c5e4c 596 s->pm = 1;
fddbd80c 597 }
7e7c5e4c
AZ		 598 break;
599
600 case 0x28: /* DISPOFF */
601 s->onoff = 0;
7e7c5e4c
AZ		 602 break;
603 case 0x29: /* DISPON */
604 s->onoff = 1;
7e7c5e4c
AZ		 605 break;
606
607 case 0x2a: /* CASET */
608 case 0x2b: /* RASET */
609 case 0x2c: /* RAMWR */
610 case 0x2d: /* RGBSET */
611 case 0x2e: /* RAMRD */
612 case 0x30: /* PTLAR */
613 case 0x33: /* SCRLAR */
614 goto bad_cmd;
615
616 case 0x34: /* TEOFF */
617 s->te = 0;
618 break;
619 case 0x35: /* TEON */
fddbd80c 620 if (!s->pm) {
7e7c5e4c 621 s->te = 1;
fddbd80c 622 } else if (s->pm < 0) {
7e7c5e4c 623 s->pm = 1;
fddbd80c 624 }
7e7c5e4c
AZ		 625 break;
626
627 case 0x36: /* MADCTR */
628 goto bad_cmd;
629
630 case 0x37: /* VSCSAD */
631 s->partial = 0;
632 s->normal = 0;
633 s->vscr = 1;
634 break;
635
636 case 0x38: /* IDMOFF */
637 case 0x39: /* IDMON */
638 case 0x3a: /* COLMOD */
639 goto bad_cmd;
640
641 case 0xb0: /* CLKINT / DISCTL */
642 case 0xb1: /* CLKEXT */
fddbd80c 643 if (s->pm < 0) {
7e7c5e4c 644 s->pm = 2;
fddbd80c 645 }
7e7c5e4c
AZ		 646 break;
647
648 case 0xb4: /* FRMSEL */
649 break;
650
651 case 0xb5: /* FRM8SEL */
652 case 0xb6: /* TMPRNG / INIESC */
653 case 0xb7: /* TMPHIS / NOP2 */
654 case 0xb8: /* TMPREAD / MADCTL */
655 case 0xba: /* DISTCTR */
656 case 0xbb: /* EPVOL */
657 goto bad_cmd;
658
659 case 0xbd: /* Unknown */
660 s->p = 0;
661 s->resp[0] = 0;
662 s->resp[1] = 1;
663 break;
664
665 case 0xc2: /* IFMOD */
fddbd80c 666 if (s->pm < 0) {
7e7c5e4c 667 s->pm = 2;
fddbd80c 668 }
7e7c5e4c
AZ		 669 break;
670
671 case 0xc6: /* PWRCTL */
672 case 0xc7: /* PPWRCTL */
673 case 0xd0: /* EPWROUT */
674 case 0xd1: /* EPWRIN */
675 case 0xd4: /* RDEV */
676 case 0xd5: /* RDRR */
677 goto bad_cmd;
678
679 case 0xda: /* RDID1 */
680 s->p = 0;
681 s->resp[0] = (s->id >> 16) & 0xff;
682 break;
683 case 0xdb: /* RDID2 */
684 s->p = 0;
685 s->resp[0] = (s->id >> 8) & 0xff;
686 break;
687 case 0xdc: /* RDID3 */
688 s->p = 0;
689 s->resp[0] = (s->id >> 0) & 0xff;
690 break;
691
692 default:
693 bad_cmd:
591f73f6
PM		 694 qemu_log_mask(LOG_GUEST_ERROR,
695 "%s: unknown command %02x\n", __func__, s->cmd);
7e7c5e4c
AZ		 696 break;
697 }
698
699 return ret;
700}
701
702static void *mipid_init(void)
703{
7267c094 704 struct mipid_s *s = (struct mipid_s *) g_malloc0(sizeof(*s));
7e7c5e4c
AZ		 705
706 s->id = 0x838f03;
707 mipid_reset(s);
708
709 return s;
710}
711
e927bb00 712static void n8x0_spi_setup(struct n800_s *s)
7e7c5e4c 713{
e927bb00 714 void *tsc = s->ts.opaque;
7e7c5e4c
AZ		 715 void *mipid = mipid_init();
716
518ec134
AF		 717 omap_mcspi_attach(s->mpu->mcspi[0], s->ts.txrx, tsc, 0);
718 omap_mcspi_attach(s->mpu->mcspi[0], mipid_txrx, mipid, 1);
7e7c5e4c
AZ		 719}
720
721/* This task is normally performed by the bootloader. If we're loading
722 * a kernel directly, we need to enable the Blizzard ourselves. */
723static void n800_dss_init(struct rfbi_chip_s *chip)
724{
725 uint8_t *fb_blank;
726
727 chip->write(chip->opaque, 0, 0x2a); /* LCD Width register */
728 chip->write(chip->opaque, 1, 0x64);
729 chip->write(chip->opaque, 0, 0x2c); /* LCD HNDP register */
730 chip->write(chip->opaque, 1, 0x1e);
731 chip->write(chip->opaque, 0, 0x2e); /* LCD Height 0 register */
732 chip->write(chip->opaque, 1, 0xe0);
733 chip->write(chip->opaque, 0, 0x30); /* LCD Height 1 register */
734 chip->write(chip->opaque, 1, 0x01);
735 chip->write(chip->opaque, 0, 0x32); /* LCD VNDP register */
736 chip->write(chip->opaque, 1, 0x06);
737 chip->write(chip->opaque, 0, 0x68); /* Display Mode register */
738 chip->write(chip->opaque, 1, 1); /* Enable bit */
739
740 chip->write(chip->opaque, 0, 0x6c);
741 chip->write(chip->opaque, 1, 0x00); /* Input X Start Position */
742 chip->write(chip->opaque, 1, 0x00); /* Input X Start Position */
743 chip->write(chip->opaque, 1, 0x00); /* Input Y Start Position */
744 chip->write(chip->opaque, 1, 0x00); /* Input Y Start Position */
745 chip->write(chip->opaque, 1, 0x1f); /* Input X End Position */
746 chip->write(chip->opaque, 1, 0x03); /* Input X End Position */
747 chip->write(chip->opaque, 1, 0xdf); /* Input Y End Position */
748 chip->write(chip->opaque, 1, 0x01); /* Input Y End Position */
749 chip->write(chip->opaque, 1, 0x00); /* Output X Start Position */
750 chip->write(chip->opaque, 1, 0x00); /* Output X Start Position */
751 chip->write(chip->opaque, 1, 0x00); /* Output Y Start Position */
752 chip->write(chip->opaque, 1, 0x00); /* Output Y Start Position */
753 chip->write(chip->opaque, 1, 0x1f); /* Output X End Position */
754 chip->write(chip->opaque, 1, 0x03); /* Output X End Position */
755 chip->write(chip->opaque, 1, 0xdf); /* Output Y End Position */
756 chip->write(chip->opaque, 1, 0x01); /* Output Y End Position */
757 chip->write(chip->opaque, 1, 0x01); /* Input Data Format */
758 chip->write(chip->opaque, 1, 0x01); /* Data Source Select */
759
7267c094 760 fb_blank = memset(g_malloc(800 * 480 * 2), 0xff, 800 * 480 * 2);
7e7c5e4c
AZ		 761 /* Display Memory Data Port */
762 chip->block(chip->opaque, 1, fb_blank, 800 * 480 * 2, 800);
7267c094 763 g_free(fb_blank);
7e7c5e4c
AZ		 764}
765
3023f332 766static void n8x0_dss_setup(struct n800_s *s)
7e7c5e4c 767{
b9d38e95 768 s->blizzard.opaque = s1d13745_init(NULL);
7e7c5e4c
AZ		 769 s->blizzard.block = s1d13745_write_block;
770 s->blizzard.write = s1d13745_write;
771 s->blizzard.read = s1d13745_read;
772
518ec134 773 omap_rfbi_attach(s->mpu->dss, 0, &s->blizzard);
7e7c5e4c
AZ		 774}
775
e927bb00 776static void n8x0_cbus_setup(struct n800_s *s)
7e7c5e4c 777{
518ec134
AF		 778 qemu_irq dat_out = qdev_get_gpio_in(s->mpu->gpio, N8X0_CBUS_DAT_GPIO);
779 qemu_irq retu_irq = qdev_get_gpio_in(s->mpu->gpio, N8X0_RETU_GPIO);
780 qemu_irq tahvo_irq = qdev_get_gpio_in(s->mpu->gpio, N8X0_TAHVO_GPIO);
7e7c5e4c 781
bc24a225 782 CBus *cbus = cbus_init(dat_out);
7e7c5e4c 783
518ec134
AF		 784 qdev_connect_gpio_out(s->mpu->gpio, N8X0_CBUS_CLK_GPIO, cbus->clk);
785 qdev_connect_gpio_out(s->mpu->gpio, N8X0_CBUS_DAT_GPIO, cbus->dat);
786 qdev_connect_gpio_out(s->mpu->gpio, N8X0_CBUS_SEL_GPIO, cbus->sel);
7e7c5e4c
AZ		 787
788 cbus_attach(cbus, s->retu = retu_init(retu_irq, 1));
789 cbus_attach(cbus, s->tahvo = tahvo_init(tahvo_irq, 1));
790}
791
58a26b47
AZ		 792static void n8x0_uart_setup(struct n800_s *s)
793{
0ec7b3e7 794 Chardev *radio = uart_hci_init();
58a26b47 795
518ec134 796 qdev_connect_gpio_out(s->mpu->gpio, N8X0_BT_RESET_GPIO,
58a26b47 797 csrhci_pins_get(radio)[csrhci_pin_reset]);
518ec134 798 qdev_connect_gpio_out(s->mpu->gpio, N8X0_BT_WKUP_GPIO,
58a26b47
AZ		 799 csrhci_pins_get(radio)[csrhci_pin_wakeup]);
800
518ec134 801 omap_uart_attach(s->mpu->uart[BT_UART], radio);
58a26b47
AZ		 802}
803
e927bb00 804static void n8x0_usb_setup(struct n800_s *s)
942ac052 805{
bdc76462
PM		 806 SysBusDevice *dev;
807 s->usb = qdev_create(NULL, "tusb6010");
1356b98d 808 dev = SYS_BUS_DEVICE(s->usb);
bdc76462
PM		 809 qdev_init_nofail(s->usb);
810 sysbus_connect_irq(dev, 0,
518ec134 811 qdev_get_gpio_in(s->mpu->gpio, N8X0_TUSB_INT_GPIO));
942ac052 812 /* Using the NOR interface */
518ec134 813 omap_gpmc_attach(s->mpu->gpmc, N8X0_USB_ASYNC_CS,
bdc76462 814 sysbus_mmio_get_region(dev, 0));
518ec134 815 omap_gpmc_attach(s->mpu->gpmc, N8X0_USB_SYNC_CS,
bdc76462 816 sysbus_mmio_get_region(dev, 1));
518ec134 817 qdev_connect_gpio_out(s->mpu->gpio, N8X0_TUSB_ENABLE_GPIO,
bdc76462 818 qdev_get_gpio_in(s->usb, 0)); /* tusb_pwr */
942ac052
AZ		 819}
820
d238db7f
AZ		 821/* Setup done before the main bootloader starts by some early setup code
822 * - used when we want to run the main bootloader in emulation. This
823 * isn't documented. */
824static uint32_t n800_pinout[104] = {
825 0x080f00d8, 0x00d40808, 0x03080808, 0x080800d0,
826 0x00dc0808, 0x0b0f0f00, 0x080800b4, 0x00c00808,
827 0x08080808, 0x180800c4, 0x00b80000, 0x08080808,
828 0x080800bc, 0x00cc0808, 0x08081818, 0x18180128,
829 0x01241800, 0x18181818, 0x000000f0, 0x01300000,
830 0x00001b0b, 0x1b0f0138, 0x00e0181b, 0x1b031b0b,
831 0x180f0078, 0x00740018, 0x0f0f0f1a, 0x00000080,
832 0x007c0000, 0x00000000, 0x00000088, 0x00840000,
833 0x00000000, 0x00000094, 0x00980300, 0x0f180003,
834 0x0000008c, 0x00900f0f, 0x0f0f1b00, 0x0f00009c,
835 0x01140000, 0x1b1b0f18, 0x0818013c, 0x01400008,
836 0x00001818, 0x000b0110, 0x010c1800, 0x0b030b0f,
837 0x181800f4, 0x00f81818, 0x00000018, 0x000000fc,
838 0x00401808, 0x00000000, 0x0f1b0030, 0x003c0008,
839 0x00000000, 0x00000038, 0x00340000, 0x00000000,
840 0x1a080070, 0x00641a1a, 0x08080808, 0x08080060,
841 0x005c0808, 0x08080808, 0x08080058, 0x00540808,
842 0x08080808, 0x0808006c, 0x00680808, 0x08080808,
843 0x000000a8, 0x00b00000, 0x08080808, 0x000000a0,
844 0x00a40000, 0x00000000, 0x08ff0050, 0x004c0808,
845 0xffffffff, 0xffff0048, 0x0044ffff, 0xffffffff,
846 0x000000ac, 0x01040800, 0x08080b0f, 0x18180100,
847 0x01081818, 0x0b0b1808, 0x1a0300e4, 0x012c0b1a,
848 0x02020018, 0x0b000134, 0x011c0800, 0x0b1b1b00,
849 0x0f0000c8, 0x00ec181b, 0x000f0f02, 0x00180118,
850 0x01200000, 0x0f0b1b1b, 0x0f0200e8, 0x0000020b,
851};
852
853static void n800_setup_nolo_tags(void *sram_base)
854{
855 int i;
856 uint32_t *p = sram_base + 0x8000;
857 uint32_t *v = sram_base + 0xa000;
858
859 memset(p, 0, 0x3000);
860
861 strcpy((void *) (p + 0), "QEMU N800");
862
863 strcpy((void *) (p + 8), "F5");
864
0983979b 865 stl_p(p + 10, 0x04f70000);
d238db7f
AZ		 866 strcpy((void *) (p + 9), "RX-34");
867
868 /* RAM size in MB? */
0983979b 869 stl_p(p + 12, 0x80);
d238db7f
AZ		 870
871 /* Pointer to the list of tags */
0983979b 872 stl_p(p + 13, OMAP2_SRAM_BASE + 0x9000);
d238db7f
AZ		 873
874 /* The NOLO tags start here */
875 p = sram_base + 0x9000;
876#define ADD_TAG(tag, len) \
0983979b
PB		 877 stw_p((uint16_t *) p + 0, tag); \
878 stw_p((uint16_t *) p + 1, len); p++; \
879 stl_p(p++, OMAP2_SRAM_BASE | (((void *) v - sram_base) & 0xffff));
d238db7f
AZ		 880
881 /* OMAP STI console? Pin out settings? */
882 ADD_TAG(0x6e01, 414);
fddbd80c 883 for (i = 0; i < ARRAY_SIZE(n800_pinout); i++) {
0983979b 884 stl_p(v++, n800_pinout[i]);
fddbd80c 885 }
d238db7f
AZ		 886
887 /* Kernel memsize? */
888 ADD_TAG(0x6e05, 1);
0983979b 889 stl_p(v++, 2);
d238db7f
AZ		 890
891 /* NOLO serial console */
892 ADD_TAG(0x6e02, 4);
0983979b 893 stl_p(v++, XLDR_LL_UART); /* UART number (1 - 3) */
d238db7f
AZ		 894
895#if 0
896 /* CBUS settings (Retu/AVilma) */
897 ADD_TAG(0x6e03, 6);
0983979b
PB		 898 stw_p((uint16_t *) v + 0, 65); /* CBUS GPIO0 */
899 stw_p((uint16_t *) v + 1, 66); /* CBUS GPIO1 */
900 stw_p((uint16_t *) v + 2, 64); /* CBUS GPIO2 */
d238db7f
AZ		 901 v += 2;
902#endif
903
904 /* Nokia ASIC BB5 (Retu/Tahvo) */
905 ADD_TAG(0x6e0a, 4);
0983979b
PB		 906 stw_p((uint16_t *) v + 0, 111); /* "Retu" interrupt GPIO */
907 stw_p((uint16_t *) v + 1, 108); /* "Tahvo" interrupt GPIO */
fddbd80c 908 v++;
d238db7f
AZ		 909
910 /* LCD console? */
911 ADD_TAG(0x6e04, 4);
0983979b
PB		 912 stw_p((uint16_t *) v + 0, 30); /* ??? */
913 stw_p((uint16_t *) v + 1, 24); /* ??? */
fddbd80c 914 v++;
d238db7f
AZ		 915
916#if 0
917 /* LCD settings */
918 ADD_TAG(0x6e06, 2);
0983979b 919 stw_p((uint16_t *) (v++), 15); /* ??? */
d238db7f
AZ		 920#endif
921
922 /* I^2C (Menelaus) */
923 ADD_TAG(0x6e07, 4);
0983979b 924 stl_p(v++, 0x00720000); /* ??? */
d238db7f
AZ		 925
926 /* Unknown */
927 ADD_TAG(0x6e0b, 6);
0983979b
PB		 928 stw_p((uint16_t *) v + 0, 94); /* ??? */
929 stw_p((uint16_t *) v + 1, 23); /* ??? */
930 stw_p((uint16_t *) v + 2, 0); /* ??? */
d238db7f
AZ		 931 v += 2;
932
933 /* OMAP gpio switch info */
934 ADD_TAG(0x6e0c, 80);
935 strcpy((void *) v, "bat_cover"); v += 3;
0983979b
PB		 936 stw_p((uint16_t *) v + 0, 110); /* GPIO num ??? */
937 stw_p((uint16_t *) v + 1, 1); /* GPIO num ??? */
d238db7f
AZ		 938 v += 2;
939 strcpy((void *) v, "cam_act"); v += 3;
0983979b
PB		 940 stw_p((uint16_t *) v + 0, 95); /* GPIO num ??? */
941 stw_p((uint16_t *) v + 1, 32); /* GPIO num ??? */
d238db7f
AZ		 942 v += 2;
943 strcpy((void *) v, "cam_turn"); v += 3;
0983979b
PB		 944 stw_p((uint16_t *) v + 0, 12); /* GPIO num ??? */
945 stw_p((uint16_t *) v + 1, 33); /* GPIO num ??? */
d238db7f
AZ		 946 v += 2;
947 strcpy((void *) v, "headphone"); v += 3;
0983979b
PB		 948 stw_p((uint16_t *) v + 0, 107); /* GPIO num ??? */
949 stw_p((uint16_t *) v + 1, 17); /* GPIO num ??? */
d238db7f
AZ		 950 v += 2;
951
952 /* Bluetooth */
953 ADD_TAG(0x6e0e, 12);
0983979b
PB		 954 stl_p(v++, 0x5c623d01); /* ??? */
955 stl_p(v++, 0x00000201); /* ??? */
956 stl_p(v++, 0x00000000); /* ??? */
d238db7f
AZ		 957
958 /* CX3110x WLAN settings */
959 ADD_TAG(0x6e0f, 8);
0983979b
PB		 960 stl_p(v++, 0x00610025); /* ??? */
961 stl_p(v++, 0xffff0057); /* ??? */
d238db7f
AZ		 962
963 /* MMC host settings */
964 ADD_TAG(0x6e10, 12);
0983979b
PB		 965 stl_p(v++, 0xffff000f); /* ??? */
966 stl_p(v++, 0xffffffff); /* ??? */
967 stl_p(v++, 0x00000060); /* ??? */
d238db7f
AZ		 968
969 /* OneNAND chip select */
970 ADD_TAG(0x6e11, 10);
0983979b
PB		 971 stl_p(v++, 0x00000401); /* ??? */
972 stl_p(v++, 0x0002003a); /* ??? */
973 stl_p(v++, 0x00000002); /* ??? */
d238db7f
AZ		 974
975 /* TEA5761 sensor settings */
976 ADD_TAG(0x6e12, 2);
0983979b 977 stl_p(v++, 93); /* GPIO num ??? */
d238db7f
AZ		 978
979#if 0
980 /* Unknown tag */
981 ADD_TAG(6e09, 0);
982
983 /* Kernel UART / console */
984 ADD_TAG(6e12, 0);
985#endif
986
987 /* End of the list */
0983979b
PB		 988 stl_p(p++, 0x00000000);
989 stl_p(p++, 0x00000000);
d238db7f
AZ		 990}
991
7e7c5e4c
AZ		 992/* This task is normally performed by the bootloader. If we're loading
993 * a kernel directly, we need to set up GPMC mappings ourselves. */
994static void n800_gpmc_init(struct n800_s *s)
995{
996 uint32_t config7 =
997 (0xf << 8) | /* MASKADDRESS */
998 (1 << 6) | /* CSVALID */
999 (4 << 0); /* BASEADDRESS */
1000
1001 cpu_physical_memory_write(0x6800a078, /* GPMC_CONFIG7_0 */
e1fe50dc 1002 &config7, sizeof(config7));
7e7c5e4c
AZ		 1003}
1004
1005/* Setup sequence done by the bootloader */
e927bb00 1006static void n8x0_boot_init(void *opaque)
7e7c5e4c
AZ		 1007{
1008 struct n800_s *s = (struct n800_s *) opaque;
1009 uint32_t buf;
1010
1011 /* PRCM setup */
1012#define omap_writel(addr, val) \
1013 buf = (val); \
e1fe50dc 1014 cpu_physical_memory_write(addr, &buf, sizeof(buf))
7e7c5e4c
AZ		 1015
1016 omap_writel(0x48008060, 0x41); /* PRCM_CLKSRC_CTRL */
1017 omap_writel(0x48008070, 1); /* PRCM_CLKOUT_CTRL */
1018 omap_writel(0x48008078, 0); /* PRCM_CLKEMUL_CTRL */
1019 omap_writel(0x48008090, 0); /* PRCM_VOLTSETUP */
1020 omap_writel(0x48008094, 0); /* PRCM_CLKSSETUP */
1021 omap_writel(0x48008098, 0); /* PRCM_POLCTRL */
1022 omap_writel(0x48008140, 2); /* CM_CLKSEL_MPU */
1023 omap_writel(0x48008148, 0); /* CM_CLKSTCTRL_MPU */
1024 omap_writel(0x48008158, 1); /* RM_RSTST_MPU */
1025 omap_writel(0x480081c8, 0x15); /* PM_WKDEP_MPU */
1026 omap_writel(0x480081d4, 0x1d4); /* PM_EVGENCTRL_MPU */
1027 omap_writel(0x480081d8, 0); /* PM_EVEGENONTIM_MPU */
1028 omap_writel(0x480081dc, 0); /* PM_EVEGENOFFTIM_MPU */
1029 omap_writel(0x480081e0, 0xc); /* PM_PWSTCTRL_MPU */
1030 omap_writel(0x48008200, 0x047e7ff7); /* CM_FCLKEN1_CORE */
1031 omap_writel(0x48008204, 0x00000004); /* CM_FCLKEN2_CORE */
1032 omap_writel(0x48008210, 0x047e7ff1); /* CM_ICLKEN1_CORE */
1033 omap_writel(0x48008214, 0x00000004); /* CM_ICLKEN2_CORE */
1034 omap_writel(0x4800821c, 0x00000000); /* CM_ICLKEN4_CORE */
1035 omap_writel(0x48008230, 0); /* CM_AUTOIDLE1_CORE */
1036 omap_writel(0x48008234, 0); /* CM_AUTOIDLE2_CORE */
1037 omap_writel(0x48008238, 7); /* CM_AUTOIDLE3_CORE */
1038 omap_writel(0x4800823c, 0); /* CM_AUTOIDLE4_CORE */
1039 omap_writel(0x48008240, 0x04360626); /* CM_CLKSEL1_CORE */
1040 omap_writel(0x48008244, 0x00000014); /* CM_CLKSEL2_CORE */
1041 omap_writel(0x48008248, 0); /* CM_CLKSTCTRL_CORE */
1042 omap_writel(0x48008300, 0x00000000); /* CM_FCLKEN_GFX */
1043 omap_writel(0x48008310, 0x00000000); /* CM_ICLKEN_GFX */
1044 omap_writel(0x48008340, 0x00000001); /* CM_CLKSEL_GFX */
1045 omap_writel(0x48008400, 0x00000004); /* CM_FCLKEN_WKUP */
1046 omap_writel(0x48008410, 0x00000004); /* CM_ICLKEN_WKUP */
1047 omap_writel(0x48008440, 0x00000000); /* CM_CLKSEL_WKUP */
1048 omap_writel(0x48008500, 0x000000cf); /* CM_CLKEN_PLL */
1049 omap_writel(0x48008530, 0x0000000c); /* CM_AUTOIDLE_PLL */
1050 omap_writel(0x48008540, /* CM_CLKSEL1_PLL */
1051 (0x78 << 12) | (6 << 8));
1052 omap_writel(0x48008544, 2); /* CM_CLKSEL2_PLL */
1053
1054 /* GPMC setup */
1055 n800_gpmc_init(s);
1056
1057 /* Video setup */
1058 n800_dss_init(&s->blizzard);
1059
1060 /* CPU setup */
518ec134 1061 s->mpu->cpu->env.GE = 0x5;
0941041e
AZ		 1062
1063 /* If the machine has a slided keyboard, open it */
fddbd80c 1064 if (s->kbd) {
518ec134 1065 qemu_irq_raise(qdev_get_gpio_in(s->mpu->gpio, N810_SLIDE_GPIO));
fddbd80c 1066 }
7e7c5e4c
AZ		 1067}
1068
1069#define OMAP_TAG_NOKIA_BT 0x4e01
1070#define OMAP_TAG_WLAN_CX3110X 0x4e02
1071#define OMAP_TAG_CBUS 0x4e03
1072#define OMAP_TAG_EM_ASIC_BB5 0x4e04
1073
e927bb00
AZ		 1074static struct omap_gpiosw_info_s {
1075 const char *name;
1076 int line;
1077 int type;
1078} n800_gpiosw_info[] = {
1079 {
1080 "bat_cover", N800_BAT_COVER_GPIO,
1081 OMAP_GPIOSW_TYPE_COVER | OMAP_GPIOSW_INVERTED,
1082 }, {
1083 "cam_act", N800_CAM_ACT_GPIO,
1084 OMAP_GPIOSW_TYPE_ACTIVITY,
1085 }, {
1086 "cam_turn", N800_CAM_TURN_GPIO,
1087 OMAP_GPIOSW_TYPE_ACTIVITY | OMAP_GPIOSW_INVERTED,
1088 }, {
1089 "headphone", N8X0_HEADPHONE_GPIO,
1090 OMAP_GPIOSW_TYPE_CONNECTION | OMAP_GPIOSW_INVERTED,
1091 },
b9d38e95 1092 { NULL }
e927bb00
AZ		 1093}, n810_gpiosw_info[] = {
1094 {
1095 "gps_reset", N810_GPS_RESET_GPIO,
1096 OMAP_GPIOSW_TYPE_ACTIVITY | OMAP_GPIOSW_OUTPUT,
1097 }, {
1098 "gps_wakeup", N810_GPS_WAKEUP_GPIO,
1099 OMAP_GPIOSW_TYPE_ACTIVITY | OMAP_GPIOSW_OUTPUT,
1100 }, {
1101 "headphone", N8X0_HEADPHONE_GPIO,
1102 OMAP_GPIOSW_TYPE_CONNECTION | OMAP_GPIOSW_INVERTED,
1103 }, {
1104 "kb_lock", N810_KB_LOCK_GPIO,
1105 OMAP_GPIOSW_TYPE_COVER | OMAP_GPIOSW_INVERTED,
1106 }, {
1107 "sleepx_led", N810_SLEEPX_LED_GPIO,
1108 OMAP_GPIOSW_TYPE_ACTIVITY | OMAP_GPIOSW_INVERTED | OMAP_GPIOSW_OUTPUT,
1109 }, {
1110 "slide", N810_SLIDE_GPIO,
1111 OMAP_GPIOSW_TYPE_COVER | OMAP_GPIOSW_INVERTED,
1112 },
b9d38e95 1113 { NULL }
e927bb00
AZ		 1114};
1115
1116static struct omap_partition_info_s {
1117 uint32_t offset;
1118 uint32_t size;
1119 int mask;
1120 const char *name;
1121} n800_part_info[] = {
1122 { 0x00000000, 0x00020000, 0x3, "bootloader" },
1123 { 0x00020000, 0x00060000, 0x0, "config" },
1124 { 0x00080000, 0x00200000, 0x0, "kernel" },
1125 { 0x00280000, 0x00200000, 0x3, "initfs" },
1126 { 0x00480000, 0x0fb80000, 0x3, "rootfs" },
1127
b9d38e95 1128 { 0, 0, 0, NULL }
e927bb00
AZ		 1129}, n810_part_info[] = {
1130 { 0x00000000, 0x00020000, 0x3, "bootloader" },
1131 { 0x00020000, 0x00060000, 0x0, "config" },
1132 { 0x00080000, 0x00220000, 0x0, "kernel" },
1133 { 0x002a0000, 0x00400000, 0x0, "initfs" },
1134 { 0x006a0000, 0x0f960000, 0x0, "rootfs" },
1135
b9d38e95 1136 { 0, 0, 0, NULL }
e927bb00
AZ		 1137};
1138
c227f099 1139static bdaddr_t n8x0_bd_addr = {{ N8X0_BD_ADDR }};
c580d92b 1140
e927bb00 1141static int n8x0_atag_setup(void *p, int model)
7e7c5e4c
AZ		 1142{
1143 uint8_t *b;
1144 uint16_t *w;
1145 uint32_t *l;
e927bb00
AZ		 1146 struct omap_gpiosw_info_s *gpiosw;
1147 struct omap_partition_info_s *partition;
1148 const char *tag;
7e7c5e4c
AZ		 1149
1150 w = p;
1151
0983979b
PB		 1152 stw_p(w++, OMAP_TAG_UART); /* u16 tag */
1153 stw_p(w++, 4); /* u16 len */
1154 stw_p(w++, (1 << 2) | (1 << 1) | (1 << 0)); /* uint enabled_uarts */
fddbd80c 1155 w++;
7e7c5e4c 1156
e927bb00 1157#if 0
0983979b
PB		 1158 stw_p(w++, OMAP_TAG_SERIAL_CONSOLE); /* u16 tag */
1159 stw_p(w++, 4); /* u16 len */
1160 stw_p(w++, XLDR_LL_UART + 1); /* u8 console_uart */
1161 stw_p(w++, 115200); /* u32 console_speed */
e927bb00
AZ		 1162#endif
1163
0983979b
PB		 1164 stw_p(w++, OMAP_TAG_LCD); /* u16 tag */
1165 stw_p(w++, 36); /* u16 len */
e927bb00
AZ		 1166 strcpy((void *) w, "QEMU LCD panel"); /* char panel_name[16] */
1167 w += 8;
1168 strcpy((void *) w, "blizzard"); /* char ctrl_name[16] */
1169 w += 8;
0983979b
PB		 1170 stw_p(w++, N810_BLIZZARD_RESET_GPIO); /* TODO: n800 s16 nreset_gpio */
1171 stw_p(w++, 24); /* u8 data_lines */
1172
1173 stw_p(w++, OMAP_TAG_CBUS); /* u16 tag */
1174 stw_p(w++, 8); /* u16 len */
1175 stw_p(w++, N8X0_CBUS_CLK_GPIO); /* s16 clk_gpio */
1176 stw_p(w++, N8X0_CBUS_DAT_GPIO); /* s16 dat_gpio */
1177 stw_p(w++, N8X0_CBUS_SEL_GPIO); /* s16 sel_gpio */
fddbd80c 1178 w++;
7e7c5e4c 1179
0983979b
PB		 1180 stw_p(w++, OMAP_TAG_EM_ASIC_BB5); /* u16 tag */
1181 stw_p(w++, 4); /* u16 len */
1182 stw_p(w++, N8X0_RETU_GPIO); /* s16 retu_irq_gpio */
1183 stw_p(w++, N8X0_TAHVO_GPIO); /* s16 tahvo_irq_gpio */
e927bb00
AZ		 1184
1185 gpiosw = (model == 810) ? n810_gpiosw_info : n800_gpiosw_info;
fddbd80c 1186 for (; gpiosw->name; gpiosw++) {
0983979b
PB		 1187 stw_p(w++, OMAP_TAG_GPIO_SWITCH); /* u16 tag */
1188 stw_p(w++, 20); /* u16 len */
e927bb00
AZ		 1189 strcpy((void *) w, gpiosw->name); /* char name[12] */
1190 w += 6;
0983979b
PB		 1191 stw_p(w++, gpiosw->line); /* u16 gpio */
1192 stw_p(w++, gpiosw->type);
1193 stw_p(w++, 0);
1194 stw_p(w++, 0);
e927bb00 1195 }
7e7c5e4c 1196
0983979b
PB		 1197 stw_p(w++, OMAP_TAG_NOKIA_BT); /* u16 tag */
1198 stw_p(w++, 12); /* u16 len */
7e7c5e4c 1199 b = (void *) w;
0983979b
PB		 1200 stb_p(b++, 0x01); /* u8 chip_type (CSR) */
1201 stb_p(b++, N8X0_BT_WKUP_GPIO); /* u8 bt_wakeup_gpio */
1202 stb_p(b++, N8X0_BT_HOST_WKUP_GPIO); /* u8 host_wakeup_gpio */
1203 stb_p(b++, N8X0_BT_RESET_GPIO); /* u8 reset_gpio */
1204 stb_p(b++, BT_UART + 1); /* u8 bt_uart */
c580d92b 1205 memcpy(b, &n8x0_bd_addr, 6); /* u8 bd_addr[6] */
7e7c5e4c 1206 b += 6;
0983979b 1207 stb_p(b++, 0x02); /* u8 bt_sysclk (38.4) */
7e7c5e4c
AZ		 1208 w = (void *) b;
1209
0983979b
PB		 1210 stw_p(w++, OMAP_TAG_WLAN_CX3110X); /* u16 tag */
1211 stw_p(w++, 8); /* u16 len */
1212 stw_p(w++, 0x25); /* u8 chip_type */
1213 stw_p(w++, N8X0_WLAN_PWR_GPIO); /* s16 power_gpio */
1214 stw_p(w++, N8X0_WLAN_IRQ_GPIO); /* s16 irq_gpio */
1215 stw_p(w++, -1); /* s16 spi_cs_gpio */
7e7c5e4c 1216
0983979b
PB		 1217 stw_p(w++, OMAP_TAG_MMC); /* u16 tag */
1218 stw_p(w++, 16); /* u16 len */
e927bb00 1219 if (model == 810) {
0983979b
PB		 1220 stw_p(w++, 0x23f); /* unsigned flags */
1221 stw_p(w++, -1); /* s16 power_pin */
1222 stw_p(w++, -1); /* s16 switch_pin */
1223 stw_p(w++, -1); /* s16 wp_pin */
1224 stw_p(w++, 0x240); /* unsigned flags */
1225 stw_p(w++, 0xc000); /* s16 power_pin */
1226 stw_p(w++, 0x0248); /* s16 switch_pin */
1227 stw_p(w++, 0xc000); /* s16 wp_pin */
e927bb00 1228 } else {
0983979b
PB		 1229 stw_p(w++, 0xf); /* unsigned flags */
1230 stw_p(w++, -1); /* s16 power_pin */
1231 stw_p(w++, -1); /* s16 switch_pin */
1232 stw_p(w++, -1); /* s16 wp_pin */
1233 stw_p(w++, 0); /* unsigned flags */
1234 stw_p(w++, 0); /* s16 power_pin */
1235 stw_p(w++, 0); /* s16 switch_pin */
1236 stw_p(w++, 0); /* s16 wp_pin */
e927bb00 1237 }
7e7c5e4c 1238
0983979b
PB		 1239 stw_p(w++, OMAP_TAG_TEA5761); /* u16 tag */
1240 stw_p(w++, 4); /* u16 len */
1241 stw_p(w++, N8X0_TEA5761_CS_GPIO); /* u16 enable_gpio */
fddbd80c 1242 w++;
7e7c5e4c 1243
e927bb00 1244 partition = (model == 810) ? n810_part_info : n800_part_info;
fddbd80c 1245 for (; partition->name; partition++) {
0983979b
PB		 1246 stw_p(w++, OMAP_TAG_PARTITION); /* u16 tag */
1247 stw_p(w++, 28); /* u16 len */
e927bb00
AZ		 1248 strcpy((void *) w, partition->name); /* char name[16] */
1249 l = (void *) (w + 8);
0983979b
PB		 1250 stl_p(l++, partition->size); /* unsigned int size */
1251 stl_p(l++, partition->offset); /* unsigned int offset */
1252 stl_p(l++, partition->mask); /* unsigned int mask_flags */
e927bb00
AZ		 1253 w = (void *) l;
1254 }
7e7c5e4c 1255
0983979b
PB		 1256 stw_p(w++, OMAP_TAG_BOOT_REASON); /* u16 tag */
1257 stw_p(w++, 12); /* u16 len */
7e7c5e4c
AZ		 1258#if 0
1259 strcpy((void *) w, "por"); /* char reason_str[12] */
1260 strcpy((void *) w, "charger"); /* char reason_str[12] */
1261 strcpy((void *) w, "32wd_to"); /* char reason_str[12] */
1262 strcpy((void *) w, "sw_rst"); /* char reason_str[12] */
1263 strcpy((void *) w, "mbus"); /* char reason_str[12] */
1264 strcpy((void *) w, "unknown"); /* char reason_str[12] */
1265 strcpy((void *) w, "swdg_to"); /* char reason_str[12] */
1266 strcpy((void *) w, "sec_vio"); /* char reason_str[12] */
1267 strcpy((void *) w, "pwr_key"); /* char reason_str[12] */
1268 strcpy((void *) w, "rtc_alarm"); /* char reason_str[12] */
1269#else
1270 strcpy((void *) w, "pwr_key"); /* char reason_str[12] */
1271#endif
1272 w += 6;
1273
e927bb00 1274 tag = (model == 810) ? "RX-44" : "RX-34";
0983979b
PB		 1275 stw_p(w++, OMAP_TAG_VERSION_STR); /* u16 tag */
1276 stw_p(w++, 24); /* u16 len */
7e7c5e4c
AZ		 1277 strcpy((void *) w, "product"); /* char component[12] */
1278 w += 6;
e927bb00 1279 strcpy((void *) w, tag); /* char version[12] */
7e7c5e4c
AZ		 1280 w += 6;
1281
0983979b
PB		 1282 stw_p(w++, OMAP_TAG_VERSION_STR); /* u16 tag */
1283 stw_p(w++, 24); /* u16 len */
7e7c5e4c
AZ		 1284 strcpy((void *) w, "hw-build"); /* char component[12] */
1285 w += 6;
93bfef4c 1286 strcpy((void *) w, "QEMU ");
35c2c8dc 1287 pstrcat((void *) w, 12, qemu_hw_version()); /* char version[12] */
7e7c5e4c
AZ		 1288 w += 6;
1289
e927bb00 1290 tag = (model == 810) ? "1.1.10-qemu" : "1.1.6-qemu";
0983979b
PB		 1291 stw_p(w++, OMAP_TAG_VERSION_STR); /* u16 tag */
1292 stw_p(w++, 24); /* u16 len */
7e7c5e4c
AZ		 1293 strcpy((void *) w, "nolo"); /* char component[12] */
1294 w += 6;
e927bb00 1295 strcpy((void *) w, tag); /* char version[12] */
7e7c5e4c 1296 w += 6;
7e7c5e4c
AZ		 1297
1298 return (void *) w - p;
1299}
1300
462a8bc6 1301static int n800_atag_setup(const struct arm_boot_info *info, void *p)
e927bb00
AZ		 1302{
1303 return n8x0_atag_setup(p, 800);
1304}
7e7c5e4c 1305
462a8bc6 1306static int n810_atag_setup(const struct arm_boot_info *info, void *p)
e927bb00
AZ		 1307{
1308 return n8x0_atag_setup(p, 810);
1309}
1310
3ef96221 1311static void n8x0_init(MachineState *machine,
462b69bb 1312 struct arm_boot_info *binfo, int model)
7e7c5e4c 1313{
aee39503 1314 MemoryRegion *sysmem = get_system_memory();
7267c094 1315 struct n800_s *s = (struct n800_s *) g_malloc0(sizeof(*s));
e927bb00 1316 int sdram_size = binfo->ram_size;
7e7c5e4c 1317
ba1ba5cc 1318 s->mpu = omap2420_mpu_init(sysmem, sdram_size, machine->cpu_type);
7e7c5e4c 1319
0941041e
AZ		 1320 /* Setup peripherals
1321 *
1322 * Believed external peripherals layout in the N810:
1323 * (spi bus 1)
1324 * tsc2005
1325 * lcd_mipid
1326 * (spi bus 2)
1327 * Conexant cx3110x (WLAN)
1328 * optional: pc2400m (WiMAX)
1329 * (i2c bus 0)
1330 * TLV320AIC33 (audio codec)
1331 * TCM825x (camera by Toshiba)
1332 * lp5521 (clever LEDs)
1333 * tsl2563 (light sensor, hwmon, model 7, rev. 0)
1334 * lm8323 (keypad, manf 00, rev 04)
1335 * (i2c bus 1)
1336 * tmp105 (temperature sensor, hwmon)
1337 * menelaus (pm)
d238db7f
AZ		 1338 * (somewhere on i2c - maybe N800-only)
1339 * tea5761 (FM tuner)
1340 * (serial 0)
1341 * GPS
1342 * (some serial port)
1343 * csr41814 (Bluetooth)
0941041e 1344 */
e927bb00 1345 n8x0_gpio_setup(s);
7e7c5e4c 1346 n8x0_nand_setup(s);
e927bb00 1347 n8x0_i2c_setup(s);
fddbd80c 1348 if (model == 800) {
e927bb00 1349 n800_tsc_kbd_setup(s);
fddbd80c 1350 } else if (model == 810) {
e927bb00 1351 n810_tsc_setup(s);
1d4e547b
AZ		 1352 n810_kbd_setup(s);
1353 }
e927bb00 1354 n8x0_spi_setup(s);
3023f332 1355 n8x0_dss_setup(s);
e927bb00 1356 n8x0_cbus_setup(s);
58a26b47 1357 n8x0_uart_setup(s);
4bcbe0b6 1358 if (machine_usb(machine)) {
e927bb00 1359 n8x0_usb_setup(s);
094b287f 1360 }
7e7c5e4c 1361
3ef96221 1362 if (machine->kernel_filename) {
7e7c5e4c 1363 /* Or at the linux loader. */
2744ece8 1364 arm_load_kernel(s->mpu->cpu, machine, binfo);
7e7c5e4c 1365
a08d4367 1366 qemu_register_reset(n8x0_boot_init, s);
7e7c5e4c
AZ		 1367 }
1368
462b69bb 1369 if (option_rom[0].name &&
3ef96221 1370 (machine->boot_order[0] == 'n' || !machine->kernel_filename)) {
0b062eb0 1371 uint8_t *nolo_tags = g_new(uint8_t, 0x10000);
d238db7f 1372 /* No, wait, better start at the ROM. */
518ec134 1373 s->mpu->cpu->env.regs[15] = OMAP2_Q2_BASE + 0x400000;
d238db7f
AZ		 1374
1375 /* This is intended for loading the `secondary.bin' program from
1376 * Nokia images (the NOLO bootloader). The entry point seems
1377 * to be at OMAP2_Q2_BASE + 0x400000.
1378 *
1379 * The `2nd.bin' files contain some kind of earlier boot code and
1380 * for them the entry point needs to be set to OMAP2_SRAM_BASE.
1381 *
1382 * The code above is for loading the `zImage' file from Nokia
1383 * images. */
591f73f6
PM		 1384 load_image_targphys(option_rom[0].name,
1385 OMAP2_Q2_BASE + 0x400000,
1386 sdram_size - 0x400000);
d238db7f 1387
5c130f65
PB		 1388 n800_setup_nolo_tags(nolo_tags);
1389 cpu_physical_memory_write(OMAP2_SRAM_BASE, nolo_tags, 0x10000);
0b062eb0 1390 g_free(nolo_tags);
d238db7f 1391 }
7e7c5e4c
AZ		 1392}
1393
e927bb00
AZ		 1394static struct arm_boot_info n800_binfo = {
1395 .loader_start = OMAP2_Q2_BASE,
1396 /* Actually two chips of 0x4000000 bytes each */
1397 .ram_size = 0x08000000,
1398 .board_id = 0x4f7,
1399 .atag_board = n800_atag_setup,
1400};
1401
1402static struct arm_boot_info n810_binfo = {
1403 .loader_start = OMAP2_Q2_BASE,
1404 /* Actually two chips of 0x4000000 bytes each */
1405 .ram_size = 0x08000000,
1406 /* 0x60c and 0x6bf (WiMAX Edition) have been assigned but are not
1407 * used by some older versions of the bootloader and 5555 is used
1408 * instead (including versions that shipped with many devices). */
1409 .board_id = 0x60c,
1410 .atag_board = n810_atag_setup,
1411};
1412
3ef96221 1413static void n800_init(MachineState *machine)
e927bb00 1414{
30d76f13 1415 n8x0_init(machine, &n800_binfo, 800);
e927bb00
AZ		 1416}
1417
3ef96221 1418static void n810_init(MachineState *machine)
e927bb00 1419{
30d76f13 1420 n8x0_init(machine, &n810_binfo, 810);
e927bb00
AZ		 1421}
1422
8a661aea 1423static void n800_class_init(ObjectClass *oc, void *data)
e264d29d 1424{
8a661aea
AF		 1425 MachineClass *mc = MACHINE_CLASS(oc);
1426
e264d29d
EH		 1427 mc->desc = "Nokia N800 tablet aka. RX-34 (OMAP2420)";
1428 mc->init = n800_init;
1429 mc->default_boot_order = "";
4672cbd7 1430 mc->ignore_memory_transaction_failures = true;
ba1ba5cc 1431 mc->default_cpu_type = ARM_CPU_TYPE_NAME("arm1136-r2");
e264d29d 1432}
e927bb00 1433
8a661aea
AF		 1434static const TypeInfo n800_type = {
1435 .name = MACHINE_TYPE_NAME("n800"),
1436 .parent = TYPE_MACHINE,
1437 .class_init = n800_class_init,
1438};
f80f9ec9 1439
8a661aea 1440static void n810_class_init(ObjectClass *oc, void *data)
f80f9ec9 1441{
8a661aea
AF		 1442 MachineClass *mc = MACHINE_CLASS(oc);
1443
e264d29d
EH		 1444 mc->desc = "Nokia N810 tablet aka. RX-44 (OMAP2420)";
1445 mc->init = n810_init;
1446 mc->default_boot_order = "";
4672cbd7 1447 mc->ignore_memory_transaction_failures = true;
ba1ba5cc 1448 mc->default_cpu_type = ARM_CPU_TYPE_NAME("arm1136-r2");
f80f9ec9
AL		 1449}
1450
8a661aea
AF		 1451static const TypeInfo n810_type = {
1452 .name = MACHINE_TYPE_NAME("n810"),
1453 .parent = TYPE_MACHINE,
1454 .class_init = n810_class_init,
1455};
1456
1457static void nseries_machine_init(void)
1458{
1459 type_register_static(&n800_type);
1460 type_register_static(&n810_type);
1461}
1462
0e6aac87 1463type_init(nseries_machine_init)
QEMU mirror