[mirror_qemu.git] / hw / armv7m_nvic.c

/*
 * ARM Nested Vectored Interrupt Controller
 *
 * Copyright (c) 2006-2007 CodeSourcery.
 * Written by Paul Brook
 *
 * This code is licensed under the GPL.
 *
 * The ARMv7M System controller is fairly tightly tied in with the
 * NVIC.  Much of that is also implemented here.
 */

#include "sysbus.h"
#include "qemu-timer.h"
#include "arm-misc.h"
#include "exec-memory.h"

#define NCPU 1
#define NVIC 1

/* Only a single "CPU" interface is present.  */
static inline int
gic_get_current_cpu(void)
{
    return 0;
}

static uint32_t nvic_readl(void *opaque, uint32_t offset);
static void nvic_writel(void *opaque, uint32_t offset, uint32_t value);

#include "arm_gic.c"

typedef struct {
    gic_state gic;
    struct {
        uint32_t control;
        uint32_t reload;
        int64_t tick;
        QEMUTimer *timer;
    } systick;
    uint32_t num_irq;
} nvic_state;

/* qemu timers run at 1GHz.   We want something closer to 1MHz.  */
#define SYSTICK_SCALE 1000ULL

#define SYSTICK_ENABLE    (1 << 0)
#define SYSTICK_TICKINT   (1 << 1)
#define SYSTICK_CLKSOURCE (1 << 2)
#define SYSTICK_COUNTFLAG (1 << 16)

int system_clock_scale;

/* Conversion factor from qemu timer to SysTick frequencies.  */
static inline int64_t systick_scale(nvic_state *s)
{
    if (s->systick.control & SYSTICK_CLKSOURCE)
        return system_clock_scale;
    else
        return 1000;
}

static void systick_reload(nvic_state *s, int reset)
{
    if (reset)
        s->systick.tick = qemu_get_clock_ns(vm_clock);
    s->systick.tick += (s->systick.reload + 1) * systick_scale(s);
    qemu_mod_timer(s->systick.timer, s->systick.tick);
}

static void systick_timer_tick(void * opaque)
{
    nvic_state *s = (nvic_state *)opaque;
    s->systick.control |= SYSTICK_COUNTFLAG;
    if (s->systick.control & SYSTICK_TICKINT) {
        /* Trigger the interrupt.  */
        armv7m_nvic_set_pending(s, ARMV7M_EXCP_SYSTICK);
    }
    if (s->systick.reload == 0) {
        s->systick.control &= ~SYSTICK_ENABLE;
    } else {
        systick_reload(s, 0);
    }
}

/* The external routines use the hardware vector numbering, ie. the first
   IRQ is #16.  The internal GIC routines use #32 as the first IRQ.  */
void armv7m_nvic_set_pending(void *opaque, int irq)
{
    nvic_state *s = (nvic_state *)opaque;
    if (irq >= 16)
        irq += 16;
    gic_set_pending_private(&s->gic, 0, irq);
}

/* Make pending IRQ active.  */
int armv7m_nvic_acknowledge_irq(void *opaque)
{
    nvic_state *s = (nvic_state *)opaque;
    uint32_t irq;

    irq = gic_acknowledge_irq(&s->gic, 0);
    if (irq == 1023)
        hw_error("Interrupt but no vector\n");
    if (irq >= 32)
        irq -= 16;
    return irq;
}

void armv7m_nvic_complete_irq(void *opaque, int irq)
{
    nvic_state *s = (nvic_state *)opaque;
    if (irq >= 16)
        irq += 16;
    gic_complete_irq(&s->gic, 0, irq);
}

static uint32_t nvic_readl(void *opaque, uint32_t offset)
{
    nvic_state *s = (nvic_state *)opaque;
    uint32_t val;
    int irq;

    switch (offset) {
    case 4: /* Interrupt Control Type.  */
        return (s->num_irq / 32) - 1;
    case 0x10: /* SysTick Control and Status.  */
        val = s->systick.control;
        s->systick.control &= ~SYSTICK_COUNTFLAG;
        return val;
    case 0x14: /* SysTick Reload Value.  */
        return s->systick.reload;
    case 0x18: /* SysTick Current Value.  */
        {
            int64_t t;
            if ((s->systick.control & SYSTICK_ENABLE) == 0)
                return 0;
            t = qemu_get_clock_ns(vm_clock);
            if (t >= s->systick.tick)
                return 0;
            val = ((s->systick.tick - (t + 1)) / systick_scale(s)) + 1;
            /* The interrupt in triggered when the timer reaches zero.
               However the counter is not reloaded until the next clock
               tick.  This is a hack to return zero during the first tick.  */
            if (val > s->systick.reload)
                val = 0;
            return val;
        }
    case 0x1c: /* SysTick Calibration Value.  */
        return 10000;
    case 0xd00: /* CPUID Base.  */
        return cpu_single_env->cp15.c0_cpuid;
    case 0xd04: /* Interrypt Control State.  */
        /* VECTACTIVE */
        val = s->gic.running_irq[0];
        if (val == 1023) {
            val = 0;
        } else if (val >= 32) {
            val -= 16;
        }
        /* RETTOBASE */
        if (s->gic.running_irq[0] == 1023
                || s->gic.last_active[s->gic.running_irq[0]][0] == 1023) {
            val |= (1 << 11);
        }
        /* VECTPENDING */
        if (s->gic.current_pending[0] != 1023)
            val |= (s->gic.current_pending[0] << 12);
        /* ISRPENDING */
        for (irq = 32; irq < s->num_irq; irq++) {
            if (s->gic.irq_state[irq].pending) {
                val |= (1 << 22);
                break;
            }
        }
        /* PENDSTSET */
        if (s->gic.irq_state[ARMV7M_EXCP_SYSTICK].pending)
            val |= (1 << 26);
        /* PENDSVSET */
        if (s->gic.irq_state[ARMV7M_EXCP_PENDSV].pending)
            val |= (1 << 28);
        /* NMIPENDSET */
        if (s->gic.irq_state[ARMV7M_EXCP_NMI].pending)
            val |= (1 << 31);
        return val;
    case 0xd08: /* Vector Table Offset.  */
        return cpu_single_env->v7m.vecbase;
    case 0xd0c: /* Application Interrupt/Reset Control.  */
        return 0xfa05000;
    case 0xd10: /* System Control.  */
        /* TODO: Implement SLEEPONEXIT.  */
        return 0;
    case 0xd14: /* Configuration Control.  */
        /* TODO: Implement Configuration Control bits.  */
        return 0;
    case 0xd18: case 0xd1c: case 0xd20: /* System Handler Priority.  */
        irq = offset - 0xd14;
        val = 0;
        val |= s->gic.priority1[irq++][0];
        val |= s->gic.priority1[irq++][0] << 8;
        val |= s->gic.priority1[irq++][0] << 16;
        val |= s->gic.priority1[irq][0] << 24;
        return val;
    case 0xd24: /* System Handler Status.  */
        val = 0;
        if (s->gic.irq_state[ARMV7M_EXCP_MEM].active) val |= (1 << 0);
        if (s->gic.irq_state[ARMV7M_EXCP_BUS].active) val |= (1 << 1);
        if (s->gic.irq_state[ARMV7M_EXCP_USAGE].active) val |= (1 << 3);
        if (s->gic.irq_state[ARMV7M_EXCP_SVC].active) val |= (1 << 7);
        if (s->gic.irq_state[ARMV7M_EXCP_DEBUG].active) val |= (1 << 8);
        if (s->gic.irq_state[ARMV7M_EXCP_PENDSV].active) val |= (1 << 10);
        if (s->gic.irq_state[ARMV7M_EXCP_SYSTICK].active) val |= (1 << 11);
        if (s->gic.irq_state[ARMV7M_EXCP_USAGE].pending) val |= (1 << 12);
        if (s->gic.irq_state[ARMV7M_EXCP_MEM].pending) val |= (1 << 13);
        if (s->gic.irq_state[ARMV7M_EXCP_BUS].pending) val |= (1 << 14);
        if (s->gic.irq_state[ARMV7M_EXCP_SVC].pending) val |= (1 << 15);
        if (s->gic.irq_state[ARMV7M_EXCP_MEM].enabled) val |= (1 << 16);
        if (s->gic.irq_state[ARMV7M_EXCP_BUS].enabled) val |= (1 << 17);
        if (s->gic.irq_state[ARMV7M_EXCP_USAGE].enabled) val |= (1 << 18);
        return val;
    case 0xd28: /* Configurable Fault Status.  */
        /* TODO: Implement Fault Status.  */
        hw_error("Not implemented: Configurable Fault Status.");
        return 0;
    case 0xd2c: /* Hard Fault Status.  */
    case 0xd30: /* Debug Fault Status.  */
    case 0xd34: /* Mem Manage Address.  */
    case 0xd38: /* Bus Fault Address.  */
    case 0xd3c: /* Aux Fault Status.  */
        /* TODO: Implement fault status registers.  */
        goto bad_reg;
    case 0xd40: /* PFR0.  */
        return 0x00000030;
    case 0xd44: /* PRF1.  */
        return 0x00000200;
    case 0xd48: /* DFR0.  */
        return 0x00100000;
    case 0xd4c: /* AFR0.  */
        return 0x00000000;
    case 0xd50: /* MMFR0.  */
        return 0x00000030;
    case 0xd54: /* MMFR1.  */
        return 0x00000000;
    case 0xd58: /* MMFR2.  */
        return 0x00000000;
    case 0xd5c: /* MMFR3.  */
        return 0x00000000;
    case 0xd60: /* ISAR0.  */
        return 0x01141110;
    case 0xd64: /* ISAR1.  */
        return 0x02111000;
    case 0xd68: /* ISAR2.  */
        return 0x21112231;
    case 0xd6c: /* ISAR3.  */
        return 0x01111110;
    case 0xd70: /* ISAR4.  */
        return 0x01310102;
    /* TODO: Implement debug registers.  */
    default:
    bad_reg:
        hw_error("NVIC: Bad read offset 0x%x\n", offset);
    }
}

static void nvic_writel(void *opaque, uint32_t offset, uint32_t value)
{
    nvic_state *s = (nvic_state *)opaque;
    uint32_t oldval;
    switch (offset) {
    case 0x10: /* SysTick Control and Status.  */
        oldval = s->systick.control;
        s->systick.control &= 0xfffffff8;
        s->systick.control |= value & 7;
        if ((oldval ^ value) & SYSTICK_ENABLE) {
            int64_t now = qemu_get_clock_ns(vm_clock);
            if (value & SYSTICK_ENABLE) {
                if (s->systick.tick) {
                    s->systick.tick += now;
                    qemu_mod_timer(s->systick.timer, s->systick.tick);
                } else {
                    systick_reload(s, 1);
                }
            } else {
                qemu_del_timer(s->systick.timer);
                s->systick.tick -= now;
                if (s->systick.tick < 0)
                  s->systick.tick = 0;
            }
        } else if ((oldval ^ value) & SYSTICK_CLKSOURCE) {
            /* This is a hack. Force the timer to be reloaded
               when the reference clock is changed.  */
            systick_reload(s, 1);
        }
        break;
    case 0x14: /* SysTick Reload Value.  */
        s->systick.reload = value;
        break;
    case 0x18: /* SysTick Current Value.  Writes reload the timer.  */
        systick_reload(s, 1);
        s->systick.control &= ~SYSTICK_COUNTFLAG;
        break;
    case 0xd04: /* Interrupt Control State.  */
        if (value & (1 << 31)) {
            armv7m_nvic_set_pending(s, ARMV7M_EXCP_NMI);
        }
        if (value & (1 << 28)) {
            armv7m_nvic_set_pending(s, ARMV7M_EXCP_PENDSV);
        } else if (value & (1 << 27)) {
            s->gic.irq_state[ARMV7M_EXCP_PENDSV].pending = 0;
            gic_update(&s->gic);
        }
        if (value & (1 << 26)) {
            armv7m_nvic_set_pending(s, ARMV7M_EXCP_SYSTICK);
        } else if (value & (1 << 25)) {
            s->gic.irq_state[ARMV7M_EXCP_SYSTICK].pending = 0;
            gic_update(&s->gic);
        }
        break;
    case 0xd08: /* Vector Table Offset.  */
        cpu_single_env->v7m.vecbase = value & 0xffffff80;
        break;
    case 0xd0c: /* Application Interrupt/Reset Control.  */
        if ((value >> 16) == 0x05fa) {
            if (value & 2) {
                hw_error("VECTCLRACTIVE not implemented");
            }
            if (value & 5) {
                hw_error("System reset");
            }
        }
        break;
    case 0xd10: /* System Control.  */
    case 0xd14: /* Configuration Control.  */
        /* TODO: Implement control registers.  */
        goto bad_reg;
    case 0xd18: case 0xd1c: case 0xd20: /* System Handler Priority.  */
        {
            int irq;
            irq = offset - 0xd14;
            s->gic.priority1[irq++][0] = value & 0xff;
            s->gic.priority1[irq++][0] = (value >> 8) & 0xff;
            s->gic.priority1[irq++][0] = (value >> 16) & 0xff;
            s->gic.priority1[irq][0] = (value >> 24) & 0xff;
            gic_update(&s->gic);
        }
        break;
    case 0xd24: /* System Handler Control.  */
        /* TODO: Real hardware allows you to set/clear the active bits
           under some circumstances.  We don't implement this.  */
        s->gic.irq_state[ARMV7M_EXCP_MEM].enabled = (value & (1 << 16)) != 0;
        s->gic.irq_state[ARMV7M_EXCP_BUS].enabled = (value & (1 << 17)) != 0;
        s->gic.irq_state[ARMV7M_EXCP_USAGE].enabled = (value & (1 << 18)) != 0;
        break;
    case 0xd28: /* Configurable Fault Status.  */
    case 0xd2c: /* Hard Fault Status.  */
    case 0xd30: /* Debug Fault Status.  */
    case 0xd34: /* Mem Manage Address.  */
    case 0xd38: /* Bus Fault Address.  */
    case 0xd3c: /* Aux Fault Status.  */
        goto bad_reg;
    default:
    bad_reg:
        hw_error("NVIC: Bad write offset 0x%x\n", offset);
    }
}

static const VMStateDescription vmstate_nvic = {
    .name = "armv7m_nvic",
    .version_id = 1,
    .minimum_version_id = 1,
    .minimum_version_id_old = 1,
    .fields      = (VMStateField[]) {
        VMSTATE_UINT32(systick.control, nvic_state),
        VMSTATE_UINT32(systick.reload, nvic_state),
        VMSTATE_INT64(systick.tick, nvic_state),
        VMSTATE_TIMER(systick.timer, nvic_state),
        VMSTATE_END_OF_LIST()
    }
};

static int armv7m_nvic_init(SysBusDevice *dev)
{
    nvic_state *s= FROM_SYSBUSGIC(nvic_state, dev);

   /* note that for the M profile gic_init() takes the number of external
    * interrupt lines only.
    */
    gic_init(&s->gic, s->num_irq);
    memory_region_add_subregion(get_system_memory(), 0xe000e000, &s->gic.iomem);
    s->systick.timer = qemu_new_timer_ns(vm_clock, systick_timer_tick, s);
    return 0;
}

static Property armv7m_nvic_properties[] = {
    /* The ARM v7m may have anything from 0 to 496 external interrupt
     * IRQ lines. We default to 64. Other boards may differ and should
     * set this property appropriately.
     */
    DEFINE_PROP_UINT32("num-irq", nvic_state, num_irq, 64),
    DEFINE_PROP_END_OF_LIST(),
};

static void armv7m_nvic_class_init(ObjectClass *klass, void *data)
{
    DeviceClass *dc = DEVICE_CLASS(klass);
    SysBusDeviceClass *sdc = SYS_BUS_DEVICE_CLASS(klass);

    sdc->init = armv7m_nvic_init;
    dc->vmsd  = &vmstate_nvic;
    dc->props = armv7m_nvic_properties;
}

static TypeInfo armv7m_nvic_info = {
    .name          = "armv7m_nvic",
    .parent        = TYPE_SYS_BUS_DEVICE,
    .instance_size = sizeof(nvic_state),
    .class_init    = armv7m_nvic_class_init,
};

static void armv7m_nvic_register_devices(void)
{
    type_register_static(&armv7m_nvic_info);
}

device_init(armv7m_nvic_register_devices)
Commit	Line	Data
9ee6e8bb PB	1	/*
	2	* ARM Nested Vectored Interrupt Controller
	3	*
	4	* Copyright (c) 2006-2007 CodeSourcery.
	5	* Written by Paul Brook
	6	*
8e31bf38	7	* This code is licensed under the GPL.
9ee6e8bb PB	8	*
	9	* The ARMv7M System controller is fairly tightly tied in with the
	10	* NVIC. Much of that is also implemented here.
	11	*/
	12
fe7e8758	13	#include "sysbus.h"
87ecb68b PB	14	#include "qemu-timer.h"
87ecb68b PB	15	#include "arm-misc.h"
755c0802	16	#include "exec-memory.h"
9ee6e8bb	17
9ee6e8bb PB	18	#define NCPU 1
	19	#define NVIC 1
	20
	21	/* Only a single "CPU" interface is present. */
	22	static inline int
	23	gic_get_current_cpu(void)
	24	{
	25	return 0;
	26	}
	27
	28	static uint32_t nvic_readl(void *opaque, uint32_t offset);
	29	static void nvic_writel(void *opaque, uint32_t offset, uint32_t value);
	30
	31	#include "arm_gic.c"
	32
	33	typedef struct {
fe7e8758	34	gic_state gic;
9ee6e8bb PB	35	struct {
	36	uint32_t control;
	37	uint32_t reload;
	38	int64_t tick;
	39	QEMUTimer *timer;
	40	} systick;
a32134aa	41	uint32_t num_irq;
9ee6e8bb PB	42	} nvic_state;
	43
	44	/* qemu timers run at 1GHz. We want something closer to 1MHz. */
	45	#define SYSTICK_SCALE 1000ULL
	46
	47	#define SYSTICK_ENABLE (1 << 0)
	48	#define SYSTICK_TICKINT (1 << 1)
	49	#define SYSTICK_CLKSOURCE (1 << 2)
	50	#define SYSTICK_COUNTFLAG (1 << 16)
	51
7ee930d0 BS	52	int system_clock_scale;
7ee930d0 BS	53
e57ec016	54	/* Conversion factor from qemu timer to SysTick frequencies. */
9ee6e8bb PB	55	static inline int64_t systick_scale(nvic_state *s)
	56	{
	57	if (s->systick.control & SYSTICK_CLKSOURCE)
e57ec016	58	return system_clock_scale;
9ee6e8bb PB	59	else
	60	return 1000;
	61	}
	62
	63	static void systick_reload(nvic_state *s, int reset)
	64	{
	65	if (reset)
74475455	66	s->systick.tick = qemu_get_clock_ns(vm_clock);
9ee6e8bb PB	67	s->systick.tick += (s->systick.reload + 1) * systick_scale(s);
	68	qemu_mod_timer(s->systick.timer, s->systick.tick);
	69	}
	70
	71	static void systick_timer_tick(void * opaque)
	72	{
	73	nvic_state s = (nvic_state )opaque;
	74	s->systick.control \|= SYSTICK_COUNTFLAG;
	75	if (s->systick.control & SYSTICK_TICKINT) {
	76	/* Trigger the interrupt. */
	77	armv7m_nvic_set_pending(s, ARMV7M_EXCP_SYSTICK);
	78	}
	79	if (s->systick.reload == 0) {
	80	s->systick.control &= ~SYSTICK_ENABLE;
	81	} else {
	82	systick_reload(s, 0);
	83	}
	84	}
	85
	86	/* The external routines use the hardware vector numbering, ie. the first
	87	IRQ is #16. The internal GIC routines use #32 as the first IRQ. */
	88	void armv7m_nvic_set_pending(void *opaque, int irq)
	89	{
	90	nvic_state s = (nvic_state )opaque;
	91	if (irq >= 16)
	92	irq += 16;
fe7e8758	93	gic_set_pending_private(&s->gic, 0, irq);
9ee6e8bb PB	94	}
	95
	96	/* Make pending IRQ active. */
	97	int armv7m_nvic_acknowledge_irq(void *opaque)
	98	{
	99	nvic_state s = (nvic_state )opaque;
	100	uint32_t irq;
	101
fe7e8758	102	irq = gic_acknowledge_irq(&s->gic, 0);
9ee6e8bb	103	if (irq == 1023)
2ac71179	104	hw_error("Interrupt but no vector\n");
9ee6e8bb PB	105	if (irq >= 32)
	106	irq -= 16;
	107	return irq;
	108	}
	109
	110	void armv7m_nvic_complete_irq(void *opaque, int irq)
	111	{
	112	nvic_state s = (nvic_state )opaque;
	113	if (irq >= 16)
	114	irq += 16;
fe7e8758	115	gic_complete_irq(&s->gic, 0, irq);
9ee6e8bb PB	116	}
	117
	118	static uint32_t nvic_readl(void *opaque, uint32_t offset)
	119	{
	120	nvic_state s = (nvic_state )opaque;
	121	uint32_t val;
	122	int irq;
	123
	124	switch (offset) {
	125	case 4: /* Interrupt Control Type. */
a32134aa	126	return (s->num_irq / 32) - 1;
9ee6e8bb PB	127	case 0x10: /* SysTick Control and Status. */
	128	val = s->systick.control;
	129	s->systick.control &= ~SYSTICK_COUNTFLAG;
	130	return val;
	131	case 0x14: /* SysTick Reload Value. */
	132	return s->systick.reload;
	133	case 0x18: /* SysTick Current Value. */
	134	{
	135	int64_t t;
	136	if ((s->systick.control & SYSTICK_ENABLE) == 0)
	137	return 0;
74475455	138	t = qemu_get_clock_ns(vm_clock);
9ee6e8bb PB	139	if (t >= s->systick.tick)
	140	return 0;
	141	val = ((s->systick.tick - (t + 1)) / systick_scale(s)) + 1;
	142	/* The interrupt in triggered when the timer reaches zero.
	143	However the counter is not reloaded until the next clock
	144	tick. This is a hack to return zero during the first tick. */
	145	if (val > s->systick.reload)
	146	val = 0;
	147	return val;
	148	}
	149	case 0x1c: /* SysTick Calibration Value. */
	150	return 10000;
	151	case 0xd00: /* CPUID Base. */
	152	return cpu_single_env->cp15.c0_cpuid;
	153	case 0xd04: /* Interrypt Control State. */
	154	/* VECTACTIVE */
fe7e8758	155	val = s->gic.running_irq[0];
9ee6e8bb PB	156	if (val == 1023) {
	157	val = 0;
	158	} else if (val >= 32) {
	159	val -= 16;
	160	}
	161	/* RETTOBASE */
fe7e8758 PB	162	if (s->gic.running_irq[0] == 1023
fe7e8758 PB	163	\|\| s->gic.last_active[s->gic.running_irq[0]][0] == 1023) {
9ee6e8bb PB	164	val \|= (1 << 11);
	165	}
	166	/* VECTPENDING */
fe7e8758 PB	167	if (s->gic.current_pending[0] != 1023)
fe7e8758 PB	168	val \|= (s->gic.current_pending[0] << 12);
9ee6e8bb	169	/* ISRPENDING */
a32134aa	170	for (irq = 32; irq < s->num_irq; irq++) {
fe7e8758	171	if (s->gic.irq_state[irq].pending) {
9ee6e8bb PB	172	val \|= (1 << 22);
	173	break;
	174	}
	175	}
	176	/* PENDSTSET */
fe7e8758	177	if (s->gic.irq_state[ARMV7M_EXCP_SYSTICK].pending)
9ee6e8bb PB	178	val \|= (1 << 26);
9ee6e8bb PB	179	/* PENDSVSET */
fe7e8758	180	if (s->gic.irq_state[ARMV7M_EXCP_PENDSV].pending)
9ee6e8bb PB	181	val \|= (1 << 28);
9ee6e8bb PB	182	/* NMIPENDSET */
fe7e8758	183	if (s->gic.irq_state[ARMV7M_EXCP_NMI].pending)
9ee6e8bb PB	184	val \|= (1 << 31);
	185	return val;
	186	case 0xd08: /* Vector Table Offset. */
	187	return cpu_single_env->v7m.vecbase;
	188	case 0xd0c: /* Application Interrupt/Reset Control. */
	189	return 0xfa05000;
	190	case 0xd10: /* System Control. */
	191	/* TODO: Implement SLEEPONEXIT. */
	192	return 0;
	193	case 0xd14: /* Configuration Control. */
	194	/* TODO: Implement Configuration Control bits. */
	195	return 0;
	196	case 0xd18: case 0xd1c: case 0xd20: /* System Handler Priority. */
	197	irq = offset - 0xd14;
	198	val = 0;
ace22f69 BS	199	val \|= s->gic.priority1[irq++][0];
	200	val \|= s->gic.priority1[irq++][0] << 8;
	201	val \|= s->gic.priority1[irq++][0] << 16;
	202	val \|= s->gic.priority1[irq][0] << 24;
9ee6e8bb PB	203	return val;
	204	case 0xd24: /* System Handler Status. */
	205	val = 0;
fe7e8758 PB	206	if (s->gic.irq_state[ARMV7M_EXCP_MEM].active) val \|= (1 << 0);
	207	if (s->gic.irq_state[ARMV7M_EXCP_BUS].active) val \|= (1 << 1);
	208	if (s->gic.irq_state[ARMV7M_EXCP_USAGE].active) val \|= (1 << 3);
	209	if (s->gic.irq_state[ARMV7M_EXCP_SVC].active) val \|= (1 << 7);
	210	if (s->gic.irq_state[ARMV7M_EXCP_DEBUG].active) val \|= (1 << 8);
	211	if (s->gic.irq_state[ARMV7M_EXCP_PENDSV].active) val \|= (1 << 10);
	212	if (s->gic.irq_state[ARMV7M_EXCP_SYSTICK].active) val \|= (1 << 11);
	213	if (s->gic.irq_state[ARMV7M_EXCP_USAGE].pending) val \|= (1 << 12);
	214	if (s->gic.irq_state[ARMV7M_EXCP_MEM].pending) val \|= (1 << 13);
	215	if (s->gic.irq_state[ARMV7M_EXCP_BUS].pending) val \|= (1 << 14);
	216	if (s->gic.irq_state[ARMV7M_EXCP_SVC].pending) val \|= (1 << 15);
	217	if (s->gic.irq_state[ARMV7M_EXCP_MEM].enabled) val \|= (1 << 16);
	218	if (s->gic.irq_state[ARMV7M_EXCP_BUS].enabled) val \|= (1 << 17);
	219	if (s->gic.irq_state[ARMV7M_EXCP_USAGE].enabled) val \|= (1 << 18);
9ee6e8bb PB	220	return val;
	221	case 0xd28: /* Configurable Fault Status. */
	222	/* TODO: Implement Fault Status. */
2ac71179	223	hw_error("Not implemented: Configurable Fault Status.");
9ee6e8bb PB	224	return 0;
	225	case 0xd2c: /* Hard Fault Status. */
	226	case 0xd30: /* Debug Fault Status. */
	227	case 0xd34: /* Mem Manage Address. */
	228	case 0xd38: /* Bus Fault Address. */
	229	case 0xd3c: /* Aux Fault Status. */
	230	/* TODO: Implement fault status registers. */
	231	goto bad_reg;
	232	case 0xd40: /* PFR0. */
	233	return 0x00000030;
	234	case 0xd44: /* PRF1. */
	235	return 0x00000200;
	236	case 0xd48: /* DFR0. */
	237	return 0x00100000;
	238	case 0xd4c: /* AFR0. */
	239	return 0x00000000;
	240	case 0xd50: /* MMFR0. */
	241	return 0x00000030;
	242	case 0xd54: /* MMFR1. */
	243	return 0x00000000;
	244	case 0xd58: /* MMFR2. */
	245	return 0x00000000;
	246	case 0xd5c: /* MMFR3. */
	247	return 0x00000000;
	248	case 0xd60: /* ISAR0. */
	249	return 0x01141110;
	250	case 0xd64: /* ISAR1. */
	251	return 0x02111000;
	252	case 0xd68: /* ISAR2. */
	253	return 0x21112231;
	254	case 0xd6c: /* ISAR3. */
	255	return 0x01111110;
	256	case 0xd70: /* ISAR4. */
	257	return 0x01310102;
	258	/* TODO: Implement debug registers. */
	259	default:
	260	bad_reg:
2ac71179	261	hw_error("NVIC: Bad read offset 0x%x\n", offset);
9ee6e8bb PB	262	}
	263	}
	264
	265	static void nvic_writel(void *opaque, uint32_t offset, uint32_t value)
	266	{
	267	nvic_state s = (nvic_state )opaque;
	268	uint32_t oldval;
	269	switch (offset) {
	270	case 0x10: /* SysTick Control and Status. */
	271	oldval = s->systick.control;
	272	s->systick.control &= 0xfffffff8;
	273	s->systick.control \|= value & 7;
	274	if ((oldval ^ value) & SYSTICK_ENABLE) {
74475455	275	int64_t now = qemu_get_clock_ns(vm_clock);
9ee6e8bb PB	276	if (value & SYSTICK_ENABLE) {
	277	if (s->systick.tick) {
	278	s->systick.tick += now;
	279	qemu_mod_timer(s->systick.timer, s->systick.tick);
	280	} else {
	281	systick_reload(s, 1);
	282	}
	283	} else {
	284	qemu_del_timer(s->systick.timer);
	285	s->systick.tick -= now;
	286	if (s->systick.tick < 0)
	287	s->systick.tick = 0;
	288	}
	289	} else if ((oldval ^ value) & SYSTICK_CLKSOURCE) {
	290	/* This is a hack. Force the timer to be reloaded
	291	when the reference clock is changed. */
	292	systick_reload(s, 1);
	293	}
	294	break;
	295	case 0x14: /* SysTick Reload Value. */
	296	s->systick.reload = value;
	297	break;
	298	case 0x18: /* SysTick Current Value. Writes reload the timer. */
	299	systick_reload(s, 1);
	300	s->systick.control &= ~SYSTICK_COUNTFLAG;
	301	break;
	302	case 0xd04: /* Interrupt Control State. */
	303	if (value & (1 << 31)) {
	304	armv7m_nvic_set_pending(s, ARMV7M_EXCP_NMI);
	305	}
	306	if (value & (1 << 28)) {
	307	armv7m_nvic_set_pending(s, ARMV7M_EXCP_PENDSV);
	308	} else if (value & (1 << 27)) {
fe7e8758 PB	309	s->gic.irq_state[ARMV7M_EXCP_PENDSV].pending = 0;
fe7e8758 PB	310	gic_update(&s->gic);
9ee6e8bb PB	311	}
	312	if (value & (1 << 26)) {
	313	armv7m_nvic_set_pending(s, ARMV7M_EXCP_SYSTICK);
	314	} else if (value & (1 << 25)) {
fe7e8758 PB	315	s->gic.irq_state[ARMV7M_EXCP_SYSTICK].pending = 0;
fe7e8758 PB	316	gic_update(&s->gic);
9ee6e8bb PB	317	}
	318	break;
	319	case 0xd08: /* Vector Table Offset. */
	320	cpu_single_env->v7m.vecbase = value & 0xffffff80;
	321	break;
	322	case 0xd0c: /* Application Interrupt/Reset Control. */
	323	if ((value >> 16) == 0x05fa) {
	324	if (value & 2) {
2ac71179	325	hw_error("VECTCLRACTIVE not implemented");
9ee6e8bb PB	326	}
9ee6e8bb PB	327	if (value & 5) {
2ac71179	328	hw_error("System reset");
9ee6e8bb PB	329	}
	330	}
	331	break;
	332	case 0xd10: /* System Control. */
	333	case 0xd14: /* Configuration Control. */
	334	/* TODO: Implement control registers. */
	335	goto bad_reg;
	336	case 0xd18: case 0xd1c: case 0xd20: /* System Handler Priority. */
	337	{
	338	int irq;
	339	irq = offset - 0xd14;
fe7e8758 PB	340	s->gic.priority1[irq++][0] = value & 0xff;
	341	s->gic.priority1[irq++][0] = (value >> 8) & 0xff;
	342	s->gic.priority1[irq++][0] = (value >> 16) & 0xff;
	343	s->gic.priority1[irq][0] = (value >> 24) & 0xff;
	344	gic_update(&s->gic);
9ee6e8bb PB	345	}
	346	break;
	347	case 0xd24: /* System Handler Control. */
	348	/* TODO: Real hardware allows you to set/clear the active bits
	349	under some circumstances. We don't implement this. */
fe7e8758 PB	350	s->gic.irq_state[ARMV7M_EXCP_MEM].enabled = (value & (1 << 16)) != 0;
	351	s->gic.irq_state[ARMV7M_EXCP_BUS].enabled = (value & (1 << 17)) != 0;
	352	s->gic.irq_state[ARMV7M_EXCP_USAGE].enabled = (value & (1 << 18)) != 0;
9ee6e8bb PB	353	break;
	354	case 0xd28: /* Configurable Fault Status. */
	355	case 0xd2c: /* Hard Fault Status. */
	356	case 0xd30: /* Debug Fault Status. */
	357	case 0xd34: /* Mem Manage Address. */
	358	case 0xd38: /* Bus Fault Address. */
	359	case 0xd3c: /* Aux Fault Status. */
	360	goto bad_reg;
	361	default:
	362	bad_reg:
2ac71179	363	hw_error("NVIC: Bad write offset 0x%x\n", offset);
9ee6e8bb PB	364	}
	365	}
	366
0797226c JQ	367	static const VMStateDescription vmstate_nvic = {
	368	.name = "armv7m_nvic",
	369	.version_id = 1,
	370	.minimum_version_id = 1,
	371	.minimum_version_id_old = 1,
	372	.fields = (VMStateField[]) {
	373	VMSTATE_UINT32(systick.control, nvic_state),
	374	VMSTATE_UINT32(systick.reload, nvic_state),
	375	VMSTATE_INT64(systick.tick, nvic_state),
	376	VMSTATE_TIMER(systick.timer, nvic_state),
	377	VMSTATE_END_OF_LIST()
	378	}
	379	};
23e39294	380
81a322d4	381	static int armv7m_nvic_init(SysBusDevice *dev)
9ee6e8bb	382	{
fe7e8758	383	nvic_state *s= FROM_SYSBUSGIC(nvic_state, dev);
9ee6e8bb	384
a32134aa ML	385	/* note that for the M profile gic_init() takes the number of external
	386	* interrupt lines only.
	387	*/
	388	gic_init(&s->gic, s->num_irq);
755c0802	389	memory_region_add_subregion(get_system_memory(), 0xe000e000, &s->gic.iomem);
74475455	390	s->systick.timer = qemu_new_timer_ns(vm_clock, systick_timer_tick, s);
81a322d4	391	return 0;
9ee6e8bb	392	}
fe7e8758	393
39bffca2 AL	394	static Property armv7m_nvic_properties[] = {
	395	/* The ARM v7m may have anything from 0 to 496 external interrupt
	396	* IRQ lines. We default to 64. Other boards may differ and should
	397	* set this property appropriately.
	398	*/
	399	DEFINE_PROP_UINT32("num-irq", nvic_state, num_irq, 64),
	400	DEFINE_PROP_END_OF_LIST(),
	401	};
	402
999e12bb AL	403	static void armv7m_nvic_class_init(ObjectClass klass, void data)
999e12bb AL	404	{
39bffca2	405	DeviceClass *dc = DEVICE_CLASS(klass);
999e12bb AL	406	SysBusDeviceClass *sdc = SYS_BUS_DEVICE_CLASS(klass);
	407
	408	sdc->init = armv7m_nvic_init;
39bffca2 AL	409	dc->vmsd = &vmstate_nvic;
39bffca2 AL	410	dc->props = armv7m_nvic_properties;
999e12bb AL	411	}
999e12bb AL	412
39bffca2 AL	413	static TypeInfo armv7m_nvic_info = {
	414	.name = "armv7m_nvic",
	415	.parent = TYPE_SYS_BUS_DEVICE,
	416	.instance_size = sizeof(nvic_state),
	417	.class_init = armv7m_nvic_class_init,
a32134aa ML	418	};
a32134aa ML	419
fe7e8758 PB	420	static void armv7m_nvic_register_devices(void)
fe7e8758 PB	421	{
39bffca2	422	type_register_static(&armv7m_nvic_info);
fe7e8758 PB	423	}
	424
	425	device_init(armv7m_nvic_register_devices)