]>
Commit | Line | Data |
---|---|---|
1da177e4 | 1 | /* |
f8ce2547 | 2 | * linux/include/linux/clk.h |
1da177e4 LT |
3 | * |
4 | * Copyright (C) 2004 ARM Limited. | |
5 | * Written by Deep Blue Solutions Limited. | |
b2476490 | 6 | * Copyright (C) 2011-2012 Linaro Ltd <mturquette@linaro.org> |
1da177e4 LT |
7 | * |
8 | * This program is free software; you can redistribute it and/or modify | |
9 | * it under the terms of the GNU General Public License version 2 as | |
10 | * published by the Free Software Foundation. | |
11 | */ | |
686f8c5d TP |
12 | #ifndef __LINUX_CLK_H |
13 | #define __LINUX_CLK_H | |
1da177e4 | 14 | |
9f1612d3 | 15 | #include <linux/err.h> |
40d3e0f4 | 16 | #include <linux/kernel.h> |
b2476490 | 17 | #include <linux/notifier.h> |
40d3e0f4 | 18 | |
1da177e4 | 19 | struct device; |
b2476490 | 20 | struct clk; |
71a2f115 KM |
21 | struct device_node; |
22 | struct of_phandle_args; | |
b2476490 | 23 | |
b2476490 MT |
24 | /** |
25 | * DOC: clk notifier callback types | |
26 | * | |
27 | * PRE_RATE_CHANGE - called immediately before the clk rate is changed, | |
28 | * to indicate that the rate change will proceed. Drivers must | |
29 | * immediately terminate any operations that will be affected by the | |
fb72a059 SB |
30 | * rate change. Callbacks may either return NOTIFY_DONE, NOTIFY_OK, |
31 | * NOTIFY_STOP or NOTIFY_BAD. | |
b2476490 MT |
32 | * |
33 | * ABORT_RATE_CHANGE: called if the rate change failed for some reason | |
34 | * after PRE_RATE_CHANGE. In this case, all registered notifiers on | |
35 | * the clk will be called with ABORT_RATE_CHANGE. Callbacks must | |
fb72a059 | 36 | * always return NOTIFY_DONE or NOTIFY_OK. |
b2476490 MT |
37 | * |
38 | * POST_RATE_CHANGE - called after the clk rate change has successfully | |
fb72a059 | 39 | * completed. Callbacks must always return NOTIFY_DONE or NOTIFY_OK. |
b2476490 | 40 | * |
1da177e4 | 41 | */ |
b2476490 MT |
42 | #define PRE_RATE_CHANGE BIT(0) |
43 | #define POST_RATE_CHANGE BIT(1) | |
44 | #define ABORT_RATE_CHANGE BIT(2) | |
1da177e4 | 45 | |
b2476490 MT |
46 | /** |
47 | * struct clk_notifier - associate a clk with a notifier | |
48 | * @clk: struct clk * to associate the notifier with | |
49 | * @notifier_head: a blocking_notifier_head for this clk | |
50 | * @node: linked list pointers | |
51 | * | |
52 | * A list of struct clk_notifier is maintained by the notifier code. | |
53 | * An entry is created whenever code registers the first notifier on a | |
54 | * particular @clk. Future notifiers on that @clk are added to the | |
55 | * @notifier_head. | |
56 | */ | |
57 | struct clk_notifier { | |
58 | struct clk *clk; | |
59 | struct srcu_notifier_head notifier_head; | |
60 | struct list_head node; | |
61 | }; | |
1da177e4 | 62 | |
b2476490 MT |
63 | /** |
64 | * struct clk_notifier_data - rate data to pass to the notifier callback | |
65 | * @clk: struct clk * being changed | |
66 | * @old_rate: previous rate of this clk | |
67 | * @new_rate: new rate of this clk | |
68 | * | |
69 | * For a pre-notifier, old_rate is the clk's rate before this rate | |
70 | * change, and new_rate is what the rate will be in the future. For a | |
71 | * post-notifier, old_rate and new_rate are both set to the clk's | |
72 | * current rate (this was done to optimize the implementation). | |
1da177e4 | 73 | */ |
b2476490 MT |
74 | struct clk_notifier_data { |
75 | struct clk *clk; | |
76 | unsigned long old_rate; | |
77 | unsigned long new_rate; | |
78 | }; | |
79 | ||
266e4e9d DA |
80 | /** |
81 | * struct clk_bulk_data - Data used for bulk clk operations. | |
82 | * | |
83 | * @id: clock consumer ID | |
84 | * @clk: struct clk * to store the associated clock | |
85 | * | |
86 | * The CLK APIs provide a series of clk_bulk_() API calls as | |
87 | * a convenience to consumers which require multiple clks. This | |
88 | * structure is used to manage data for these calls. | |
89 | */ | |
90 | struct clk_bulk_data { | |
91 | const char *id; | |
92 | struct clk *clk; | |
93 | }; | |
94 | ||
e81b87d2 KK |
95 | #ifdef CONFIG_COMMON_CLK |
96 | ||
86bcfa2e MT |
97 | /** |
98 | * clk_notifier_register: register a clock rate-change notifier callback | |
99 | * @clk: clock whose rate we are interested in | |
100 | * @nb: notifier block with callback function pointer | |
101 | * | |
102 | * ProTip: debugging across notifier chains can be frustrating. Make sure that | |
103 | * your notifier callback function prints a nice big warning in case of | |
104 | * failure. | |
105 | */ | |
b2476490 MT |
106 | int clk_notifier_register(struct clk *clk, struct notifier_block *nb); |
107 | ||
86bcfa2e MT |
108 | /** |
109 | * clk_notifier_unregister: unregister a clock rate-change notifier callback | |
110 | * @clk: clock whose rate we are no longer interested in | |
111 | * @nb: notifier block which will be unregistered | |
112 | */ | |
b2476490 MT |
113 | int clk_notifier_unregister(struct clk *clk, struct notifier_block *nb); |
114 | ||
5279fc40 BB |
115 | /** |
116 | * clk_get_accuracy - obtain the clock accuracy in ppb (parts per billion) | |
117 | * for a clock source. | |
118 | * @clk: clock source | |
119 | * | |
120 | * This gets the clock source accuracy expressed in ppb. | |
121 | * A perfect clock returns 0. | |
122 | */ | |
123 | long clk_get_accuracy(struct clk *clk); | |
124 | ||
e59c5371 MT |
125 | /** |
126 | * clk_set_phase - adjust the phase shift of a clock signal | |
127 | * @clk: clock signal source | |
128 | * @degrees: number of degrees the signal is shifted | |
129 | * | |
130 | * Shifts the phase of a clock signal by the specified degrees. Returns 0 on | |
131 | * success, -EERROR otherwise. | |
132 | */ | |
133 | int clk_set_phase(struct clk *clk, int degrees); | |
134 | ||
135 | /** | |
136 | * clk_get_phase - return the phase shift of a clock signal | |
137 | * @clk: clock signal source | |
138 | * | |
139 | * Returns the phase shift of a clock node in degrees, otherwise returns | |
140 | * -EERROR. | |
141 | */ | |
142 | int clk_get_phase(struct clk *clk); | |
143 | ||
3d3801ef MT |
144 | /** |
145 | * clk_is_match - check if two clk's point to the same hardware clock | |
146 | * @p: clk compared against q | |
147 | * @q: clk compared against p | |
148 | * | |
149 | * Returns true if the two struct clk pointers both point to the same hardware | |
0e056eb5 MCC |
150 | * clock node. Put differently, returns true if @p and @q |
151 | * share the same &struct clk_core object. | |
3d3801ef MT |
152 | * |
153 | * Returns false otherwise. Note that two NULL clks are treated as matching. | |
154 | */ | |
155 | bool clk_is_match(const struct clk *p, const struct clk *q); | |
156 | ||
5279fc40 BB |
157 | #else |
158 | ||
e81b87d2 KK |
159 | static inline int clk_notifier_register(struct clk *clk, |
160 | struct notifier_block *nb) | |
161 | { | |
162 | return -ENOTSUPP; | |
163 | } | |
164 | ||
165 | static inline int clk_notifier_unregister(struct clk *clk, | |
166 | struct notifier_block *nb) | |
167 | { | |
168 | return -ENOTSUPP; | |
169 | } | |
170 | ||
5279fc40 BB |
171 | static inline long clk_get_accuracy(struct clk *clk) |
172 | { | |
173 | return -ENOTSUPP; | |
174 | } | |
175 | ||
e59c5371 MT |
176 | static inline long clk_set_phase(struct clk *clk, int phase) |
177 | { | |
178 | return -ENOTSUPP; | |
179 | } | |
180 | ||
181 | static inline long clk_get_phase(struct clk *clk) | |
182 | { | |
183 | return -ENOTSUPP; | |
184 | } | |
185 | ||
3d3801ef MT |
186 | static inline bool clk_is_match(const struct clk *p, const struct clk *q) |
187 | { | |
188 | return p == q; | |
189 | } | |
190 | ||
7e87aed9 | 191 | #endif |
1da177e4 | 192 | |
93abe8e4 VK |
193 | /** |
194 | * clk_prepare - prepare a clock source | |
195 | * @clk: clock source | |
196 | * | |
197 | * This prepares the clock source for use. | |
198 | * | |
199 | * Must not be called from within atomic context. | |
200 | */ | |
201 | #ifdef CONFIG_HAVE_CLK_PREPARE | |
202 | int clk_prepare(struct clk *clk); | |
266e4e9d DA |
203 | int __must_check clk_bulk_prepare(int num_clks, |
204 | const struct clk_bulk_data *clks); | |
93abe8e4 VK |
205 | #else |
206 | static inline int clk_prepare(struct clk *clk) | |
207 | { | |
208 | might_sleep(); | |
209 | return 0; | |
210 | } | |
266e4e9d DA |
211 | |
212 | static inline int clk_bulk_prepare(int num_clks, struct clk_bulk_data *clks) | |
213 | { | |
214 | might_sleep(); | |
215 | return 0; | |
216 | } | |
93abe8e4 VK |
217 | #endif |
218 | ||
219 | /** | |
220 | * clk_unprepare - undo preparation of a clock source | |
221 | * @clk: clock source | |
222 | * | |
223 | * This undoes a previously prepared clock. The caller must balance | |
224 | * the number of prepare and unprepare calls. | |
225 | * | |
226 | * Must not be called from within atomic context. | |
227 | */ | |
228 | #ifdef CONFIG_HAVE_CLK_PREPARE | |
229 | void clk_unprepare(struct clk *clk); | |
266e4e9d | 230 | void clk_bulk_unprepare(int num_clks, const struct clk_bulk_data *clks); |
93abe8e4 VK |
231 | #else |
232 | static inline void clk_unprepare(struct clk *clk) | |
233 | { | |
234 | might_sleep(); | |
235 | } | |
266e4e9d DA |
236 | static inline void clk_bulk_unprepare(int num_clks, struct clk_bulk_data *clks) |
237 | { | |
238 | might_sleep(); | |
239 | } | |
93abe8e4 VK |
240 | #endif |
241 | ||
242 | #ifdef CONFIG_HAVE_CLK | |
1da177e4 LT |
243 | /** |
244 | * clk_get - lookup and obtain a reference to a clock producer. | |
245 | * @dev: device for clock "consumer" | |
a58b3a4a | 246 | * @id: clock consumer ID |
1da177e4 LT |
247 | * |
248 | * Returns a struct clk corresponding to the clock producer, or | |
ea3f4eac RK |
249 | * valid IS_ERR() condition containing errno. The implementation |
250 | * uses @dev and @id to determine the clock consumer, and thereby | |
251 | * the clock producer. (IOW, @id may be identical strings, but | |
252 | * clk_get may return different clock producers depending on @dev.) | |
f47fc0ac RK |
253 | * |
254 | * Drivers must assume that the clock source is not enabled. | |
f7ad160b AR |
255 | * |
256 | * clk_get should not be called from within interrupt context. | |
1da177e4 LT |
257 | */ |
258 | struct clk *clk_get(struct device *dev, const char *id); | |
259 | ||
266e4e9d DA |
260 | /** |
261 | * clk_bulk_get - lookup and obtain a number of references to clock producer. | |
262 | * @dev: device for clock "consumer" | |
263 | * @num_clks: the number of clk_bulk_data | |
264 | * @clks: the clk_bulk_data table of consumer | |
265 | * | |
266 | * This helper function allows drivers to get several clk consumers in one | |
267 | * operation. If any of the clk cannot be acquired then any clks | |
268 | * that were obtained will be freed before returning to the caller. | |
269 | * | |
270 | * Returns 0 if all clocks specified in clk_bulk_data table are obtained | |
271 | * successfully, or valid IS_ERR() condition containing errno. | |
272 | * The implementation uses @dev and @clk_bulk_data.id to determine the | |
273 | * clock consumer, and thereby the clock producer. | |
274 | * The clock returned is stored in each @clk_bulk_data.clk field. | |
275 | * | |
276 | * Drivers must assume that the clock source is not enabled. | |
277 | * | |
278 | * clk_bulk_get should not be called from within interrupt context. | |
279 | */ | |
280 | int __must_check clk_bulk_get(struct device *dev, int num_clks, | |
281 | struct clk_bulk_data *clks); | |
282 | ||
618aee02 DA |
283 | /** |
284 | * devm_clk_bulk_get - managed get multiple clk consumers | |
285 | * @dev: device for clock "consumer" | |
286 | * @num_clks: the number of clk_bulk_data | |
287 | * @clks: the clk_bulk_data table of consumer | |
288 | * | |
289 | * Return 0 on success, an errno on failure. | |
290 | * | |
291 | * This helper function allows drivers to get several clk | |
292 | * consumers in one operation with management, the clks will | |
293 | * automatically be freed when the device is unbound. | |
294 | */ | |
295 | int __must_check devm_clk_bulk_get(struct device *dev, int num_clks, | |
296 | struct clk_bulk_data *clks); | |
297 | ||
a8a97db9 MB |
298 | /** |
299 | * devm_clk_get - lookup and obtain a managed reference to a clock producer. | |
300 | * @dev: device for clock "consumer" | |
a58b3a4a | 301 | * @id: clock consumer ID |
a8a97db9 MB |
302 | * |
303 | * Returns a struct clk corresponding to the clock producer, or | |
304 | * valid IS_ERR() condition containing errno. The implementation | |
305 | * uses @dev and @id to determine the clock consumer, and thereby | |
306 | * the clock producer. (IOW, @id may be identical strings, but | |
307 | * clk_get may return different clock producers depending on @dev.) | |
308 | * | |
309 | * Drivers must assume that the clock source is not enabled. | |
310 | * | |
311 | * devm_clk_get should not be called from within interrupt context. | |
312 | * | |
313 | * The clock will automatically be freed when the device is unbound | |
314 | * from the bus. | |
315 | */ | |
316 | struct clk *devm_clk_get(struct device *dev, const char *id); | |
317 | ||
71a2f115 KM |
318 | /** |
319 | * devm_get_clk_from_child - lookup and obtain a managed reference to a | |
320 | * clock producer from child node. | |
321 | * @dev: device for clock "consumer" | |
322 | * @np: pointer to clock consumer node | |
323 | * @con_id: clock consumer ID | |
324 | * | |
325 | * This function parses the clocks, and uses them to look up the | |
326 | * struct clk from the registered list of clock providers by using | |
327 | * @np and @con_id | |
328 | * | |
329 | * The clock will automatically be freed when the device is unbound | |
330 | * from the bus. | |
331 | */ | |
332 | struct clk *devm_get_clk_from_child(struct device *dev, | |
333 | struct device_node *np, const char *con_id); | |
334 | ||
1da177e4 LT |
335 | /** |
336 | * clk_enable - inform the system when the clock source should be running. | |
337 | * @clk: clock source | |
338 | * | |
339 | * If the clock can not be enabled/disabled, this should return success. | |
340 | * | |
40d3e0f4 RK |
341 | * May be called from atomic contexts. |
342 | * | |
1da177e4 LT |
343 | * Returns success (0) or negative errno. |
344 | */ | |
345 | int clk_enable(struct clk *clk); | |
346 | ||
266e4e9d DA |
347 | /** |
348 | * clk_bulk_enable - inform the system when the set of clks should be running. | |
349 | * @num_clks: the number of clk_bulk_data | |
350 | * @clks: the clk_bulk_data table of consumer | |
351 | * | |
352 | * May be called from atomic contexts. | |
353 | * | |
354 | * Returns success (0) or negative errno. | |
355 | */ | |
356 | int __must_check clk_bulk_enable(int num_clks, | |
357 | const struct clk_bulk_data *clks); | |
358 | ||
1da177e4 LT |
359 | /** |
360 | * clk_disable - inform the system when the clock source is no longer required. | |
361 | * @clk: clock source | |
f47fc0ac RK |
362 | * |
363 | * Inform the system that a clock source is no longer required by | |
364 | * a driver and may be shut down. | |
365 | * | |
40d3e0f4 RK |
366 | * May be called from atomic contexts. |
367 | * | |
f47fc0ac RK |
368 | * Implementation detail: if the clock source is shared between |
369 | * multiple drivers, clk_enable() calls must be balanced by the | |
370 | * same number of clk_disable() calls for the clock source to be | |
371 | * disabled. | |
1da177e4 LT |
372 | */ |
373 | void clk_disable(struct clk *clk); | |
374 | ||
266e4e9d DA |
375 | /** |
376 | * clk_bulk_disable - inform the system when the set of clks is no | |
377 | * longer required. | |
378 | * @num_clks: the number of clk_bulk_data | |
379 | * @clks: the clk_bulk_data table of consumer | |
380 | * | |
381 | * Inform the system that a set of clks is no longer required by | |
382 | * a driver and may be shut down. | |
383 | * | |
384 | * May be called from atomic contexts. | |
385 | * | |
386 | * Implementation detail: if the set of clks is shared between | |
387 | * multiple drivers, clk_bulk_enable() calls must be balanced by the | |
388 | * same number of clk_bulk_disable() calls for the clock source to be | |
389 | * disabled. | |
390 | */ | |
391 | void clk_bulk_disable(int num_clks, const struct clk_bulk_data *clks); | |
392 | ||
1da177e4 LT |
393 | /** |
394 | * clk_get_rate - obtain the current clock rate (in Hz) for a clock source. | |
395 | * This is only valid once the clock source has been enabled. | |
396 | * @clk: clock source | |
397 | */ | |
398 | unsigned long clk_get_rate(struct clk *clk); | |
399 | ||
400 | /** | |
401 | * clk_put - "free" the clock source | |
402 | * @clk: clock source | |
f47fc0ac RK |
403 | * |
404 | * Note: drivers must ensure that all clk_enable calls made on this | |
405 | * clock source are balanced by clk_disable calls prior to calling | |
406 | * this function. | |
f7ad160b AR |
407 | * |
408 | * clk_put should not be called from within interrupt context. | |
1da177e4 LT |
409 | */ |
410 | void clk_put(struct clk *clk); | |
411 | ||
266e4e9d DA |
412 | /** |
413 | * clk_bulk_put - "free" the clock source | |
414 | * @num_clks: the number of clk_bulk_data | |
415 | * @clks: the clk_bulk_data table of consumer | |
416 | * | |
417 | * Note: drivers must ensure that all clk_bulk_enable calls made on this | |
418 | * clock source are balanced by clk_bulk_disable calls prior to calling | |
419 | * this function. | |
420 | * | |
421 | * clk_bulk_put should not be called from within interrupt context. | |
422 | */ | |
423 | void clk_bulk_put(int num_clks, struct clk_bulk_data *clks); | |
424 | ||
a8a97db9 MB |
425 | /** |
426 | * devm_clk_put - "free" a managed clock source | |
da3dae54 | 427 | * @dev: device used to acquire the clock |
a8a97db9 MB |
428 | * @clk: clock source acquired with devm_clk_get() |
429 | * | |
430 | * Note: drivers must ensure that all clk_enable calls made on this | |
431 | * clock source are balanced by clk_disable calls prior to calling | |
432 | * this function. | |
433 | * | |
434 | * clk_put should not be called from within interrupt context. | |
435 | */ | |
436 | void devm_clk_put(struct device *dev, struct clk *clk); | |
1da177e4 LT |
437 | |
438 | /* | |
439 | * The remaining APIs are optional for machine class support. | |
440 | */ | |
441 | ||
442 | ||
443 | /** | |
444 | * clk_round_rate - adjust a rate to the exact rate a clock can provide | |
445 | * @clk: clock source | |
446 | * @rate: desired clock rate in Hz | |
447 | * | |
d2d14a77 RK |
448 | * This answers the question "if I were to pass @rate to clk_set_rate(), |
449 | * what clock rate would I end up with?" without changing the hardware | |
450 | * in any way. In other words: | |
451 | * | |
452 | * rate = clk_round_rate(clk, r); | |
453 | * | |
454 | * and: | |
455 | * | |
456 | * clk_set_rate(clk, r); | |
457 | * rate = clk_get_rate(clk); | |
458 | * | |
459 | * are equivalent except the former does not modify the clock hardware | |
460 | * in any way. | |
461 | * | |
1da177e4 LT |
462 | * Returns rounded clock rate in Hz, or negative errno. |
463 | */ | |
464 | long clk_round_rate(struct clk *clk, unsigned long rate); | |
8b7730dd | 465 | |
1da177e4 LT |
466 | /** |
467 | * clk_set_rate - set the clock rate for a clock source | |
468 | * @clk: clock source | |
469 | * @rate: desired clock rate in Hz | |
470 | * | |
471 | * Returns success (0) or negative errno. | |
472 | */ | |
473 | int clk_set_rate(struct clk *clk, unsigned long rate); | |
8b7730dd | 474 | |
4e88f3de TR |
475 | /** |
476 | * clk_has_parent - check if a clock is a possible parent for another | |
477 | * @clk: clock source | |
478 | * @parent: parent clock source | |
479 | * | |
480 | * This function can be used in drivers that need to check that a clock can be | |
481 | * the parent of another without actually changing the parent. | |
482 | * | |
483 | * Returns true if @parent is a possible parent for @clk, false otherwise. | |
484 | */ | |
485 | bool clk_has_parent(struct clk *clk, struct clk *parent); | |
486 | ||
1c8e6004 TV |
487 | /** |
488 | * clk_set_rate_range - set a rate range for a clock source | |
489 | * @clk: clock source | |
490 | * @min: desired minimum clock rate in Hz, inclusive | |
491 | * @max: desired maximum clock rate in Hz, inclusive | |
492 | * | |
493 | * Returns success (0) or negative errno. | |
494 | */ | |
495 | int clk_set_rate_range(struct clk *clk, unsigned long min, unsigned long max); | |
496 | ||
497 | /** | |
498 | * clk_set_min_rate - set a minimum clock rate for a clock source | |
499 | * @clk: clock source | |
500 | * @rate: desired minimum clock rate in Hz, inclusive | |
501 | * | |
502 | * Returns success (0) or negative errno. | |
503 | */ | |
504 | int clk_set_min_rate(struct clk *clk, unsigned long rate); | |
505 | ||
506 | /** | |
507 | * clk_set_max_rate - set a maximum clock rate for a clock source | |
508 | * @clk: clock source | |
509 | * @rate: desired maximum clock rate in Hz, inclusive | |
510 | * | |
511 | * Returns success (0) or negative errno. | |
512 | */ | |
513 | int clk_set_max_rate(struct clk *clk, unsigned long rate); | |
514 | ||
1da177e4 LT |
515 | /** |
516 | * clk_set_parent - set the parent clock source for this clock | |
517 | * @clk: clock source | |
518 | * @parent: parent clock source | |
519 | * | |
520 | * Returns success (0) or negative errno. | |
521 | */ | |
522 | int clk_set_parent(struct clk *clk, struct clk *parent); | |
523 | ||
524 | /** | |
525 | * clk_get_parent - get the parent clock source for this clock | |
526 | * @clk: clock source | |
527 | * | |
528 | * Returns struct clk corresponding to parent clock source, or | |
529 | * valid IS_ERR() condition containing errno. | |
530 | */ | |
531 | struct clk *clk_get_parent(struct clk *clk); | |
532 | ||
05fd8e73 SH |
533 | /** |
534 | * clk_get_sys - get a clock based upon the device name | |
535 | * @dev_id: device name | |
536 | * @con_id: connection ID | |
537 | * | |
538 | * Returns a struct clk corresponding to the clock producer, or | |
539 | * valid IS_ERR() condition containing errno. The implementation | |
540 | * uses @dev_id and @con_id to determine the clock consumer, and | |
541 | * thereby the clock producer. In contrast to clk_get() this function | |
542 | * takes the device name instead of the device itself for identification. | |
543 | * | |
544 | * Drivers must assume that the clock source is not enabled. | |
545 | * | |
546 | * clk_get_sys should not be called from within interrupt context. | |
547 | */ | |
548 | struct clk *clk_get_sys(const char *dev_id, const char *con_id); | |
549 | ||
93abe8e4 VK |
550 | #else /* !CONFIG_HAVE_CLK */ |
551 | ||
552 | static inline struct clk *clk_get(struct device *dev, const char *id) | |
553 | { | |
554 | return NULL; | |
555 | } | |
556 | ||
266e4e9d DA |
557 | static inline int clk_bulk_get(struct device *dev, int num_clks, |
558 | struct clk_bulk_data *clks) | |
559 | { | |
560 | return 0; | |
561 | } | |
562 | ||
93abe8e4 VK |
563 | static inline struct clk *devm_clk_get(struct device *dev, const char *id) |
564 | { | |
565 | return NULL; | |
566 | } | |
567 | ||
618aee02 DA |
568 | static inline int devm_clk_bulk_get(struct device *dev, int num_clks, |
569 | struct clk_bulk_data *clks) | |
570 | { | |
571 | return 0; | |
572 | } | |
573 | ||
71a2f115 KM |
574 | static inline struct clk *devm_get_clk_from_child(struct device *dev, |
575 | struct device_node *np, const char *con_id) | |
576 | { | |
577 | return NULL; | |
578 | } | |
579 | ||
93abe8e4 VK |
580 | static inline void clk_put(struct clk *clk) {} |
581 | ||
266e4e9d DA |
582 | static inline void clk_bulk_put(int num_clks, struct clk_bulk_data *clks) {} |
583 | ||
93abe8e4 VK |
584 | static inline void devm_clk_put(struct device *dev, struct clk *clk) {} |
585 | ||
586 | static inline int clk_enable(struct clk *clk) | |
587 | { | |
588 | return 0; | |
589 | } | |
590 | ||
266e4e9d DA |
591 | static inline int clk_bulk_enable(int num_clks, struct clk_bulk_data *clks) |
592 | { | |
593 | return 0; | |
594 | } | |
595 | ||
93abe8e4 VK |
596 | static inline void clk_disable(struct clk *clk) {} |
597 | ||
266e4e9d DA |
598 | |
599 | static inline void clk_bulk_disable(int num_clks, | |
600 | struct clk_bulk_data *clks) {} | |
601 | ||
93abe8e4 VK |
602 | static inline unsigned long clk_get_rate(struct clk *clk) |
603 | { | |
604 | return 0; | |
605 | } | |
606 | ||
607 | static inline int clk_set_rate(struct clk *clk, unsigned long rate) | |
608 | { | |
609 | return 0; | |
610 | } | |
611 | ||
612 | static inline long clk_round_rate(struct clk *clk, unsigned long rate) | |
613 | { | |
614 | return 0; | |
615 | } | |
616 | ||
4e88f3de TR |
617 | static inline bool clk_has_parent(struct clk *clk, struct clk *parent) |
618 | { | |
619 | return true; | |
620 | } | |
621 | ||
93abe8e4 VK |
622 | static inline int clk_set_parent(struct clk *clk, struct clk *parent) |
623 | { | |
624 | return 0; | |
625 | } | |
626 | ||
627 | static inline struct clk *clk_get_parent(struct clk *clk) | |
628 | { | |
629 | return NULL; | |
630 | } | |
631 | ||
b81ea968 DL |
632 | static inline struct clk *clk_get_sys(const char *dev_id, const char *con_id) |
633 | { | |
634 | return NULL; | |
635 | } | |
93abe8e4 VK |
636 | #endif |
637 | ||
638 | /* clk_prepare_enable helps cases using clk_enable in non-atomic context. */ | |
639 | static inline int clk_prepare_enable(struct clk *clk) | |
640 | { | |
641 | int ret; | |
642 | ||
643 | ret = clk_prepare(clk); | |
644 | if (ret) | |
645 | return ret; | |
646 | ret = clk_enable(clk); | |
647 | if (ret) | |
648 | clk_unprepare(clk); | |
649 | ||
650 | return ret; | |
651 | } | |
652 | ||
653 | /* clk_disable_unprepare helps cases using clk_disable in non-atomic context. */ | |
654 | static inline void clk_disable_unprepare(struct clk *clk) | |
655 | { | |
656 | clk_disable(clk); | |
657 | clk_unprepare(clk); | |
658 | } | |
659 | ||
3c48d86c BA |
660 | static inline int clk_bulk_prepare_enable(int num_clks, |
661 | struct clk_bulk_data *clks) | |
662 | { | |
663 | int ret; | |
664 | ||
665 | ret = clk_bulk_prepare(num_clks, clks); | |
666 | if (ret) | |
667 | return ret; | |
668 | ret = clk_bulk_enable(num_clks, clks); | |
669 | if (ret) | |
670 | clk_bulk_unprepare(num_clks, clks); | |
671 | ||
672 | return ret; | |
673 | } | |
674 | ||
675 | static inline void clk_bulk_disable_unprepare(int num_clks, | |
676 | struct clk_bulk_data *clks) | |
677 | { | |
678 | clk_bulk_disable(num_clks, clks); | |
679 | clk_bulk_unprepare(num_clks, clks); | |
680 | } | |
681 | ||
137f8a72 | 682 | #if defined(CONFIG_OF) && defined(CONFIG_COMMON_CLK) |
766e6a4e GL |
683 | struct clk *of_clk_get(struct device_node *np, int index); |
684 | struct clk *of_clk_get_by_name(struct device_node *np, const char *name); | |
685 | struct clk *of_clk_get_from_provider(struct of_phandle_args *clkspec); | |
686 | #else | |
687 | static inline struct clk *of_clk_get(struct device_node *np, int index) | |
688 | { | |
9f1612d3 | 689 | return ERR_PTR(-ENOENT); |
766e6a4e GL |
690 | } |
691 | static inline struct clk *of_clk_get_by_name(struct device_node *np, | |
692 | const char *name) | |
693 | { | |
9f1612d3 | 694 | return ERR_PTR(-ENOENT); |
766e6a4e | 695 | } |
428c9de5 GU |
696 | static inline struct clk *of_clk_get_from_provider(struct of_phandle_args *clkspec) |
697 | { | |
698 | return ERR_PTR(-ENOENT); | |
699 | } | |
766e6a4e GL |
700 | #endif |
701 | ||
1da177e4 | 702 | #endif |