[mirror_ubuntu-bionic-kernel.git] / include / linux / i2c-gpio.h

/*
 * i2c-gpio interface to platform code
 *
 * Copyright (C) 2007 Atmel Corporation
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */
#ifndef _LINUX_I2C_GPIO_H
#define _LINUX_I2C_GPIO_H

/**
 * struct i2c_gpio_platform_data - Platform-dependent data for i2c-gpio
 * @udelay: signal toggle delay. SCL frequency is (500 / udelay) kHz
 * @timeout: clock stretching timeout in jiffies. If the slave keeps
 *	SCL low for longer than this, the transfer will time out.
 * @sda_is_open_drain: SDA is configured as open drain, i.e. the pin
 *	isn't actively driven high when setting the output value high.
 *	gpio_get_value() must return the actual pin state even if the
 *	pin is configured as an output.
 * @scl_is_open_drain: SCL is set up as open drain. Same requirements
 *	as for sda_is_open_drain apply.
 * @scl_is_output_only: SCL output drivers cannot be turned off.
 */
struct i2c_gpio_platform_data {
	int		udelay;
	int		timeout;
	unsigned int	sda_is_open_drain:1;
	unsigned int	scl_is_open_drain:1;
	unsigned int	scl_is_output_only:1;
};

#endif /* _LINUX_I2C_GPIO_H */
Commit	Line	Data
1c23af90 HS	1	/*
	2	* i2c-gpio interface to platform code
	3	*
	4	* Copyright (C) 2007 Atmel Corporation
	5	*
	6	* This program is free software; you can redistribute it and/or modify
	7	* it under the terms of the GNU General Public License version 2 as
	8	* published by the Free Software Foundation.
	9	*/
	10	#ifndef _LINUX_I2C_GPIO_H
	11	#define _LINUX_I2C_GPIO_H
	12
	13	/**
	14	* struct i2c_gpio_platform_data - Platform-dependent data for i2c-gpio
1c23af90 HS	15	* @udelay: signal toggle delay. SCL frequency is (500 / udelay) kHz
	16	* @timeout: clock stretching timeout in jiffies. If the slave keeps
	17	* SCL low for longer than this, the transfer will time out.
	18	* @sda_is_open_drain: SDA is configured as open drain, i.e. the pin
	19	* isn't actively driven high when setting the output value high.
	20	* gpio_get_value() must return the actual pin state even if the
	21	* pin is configured as an output.
	22	* @scl_is_open_drain: SCL is set up as open drain. Same requirements
	23	* as for sda_is_open_drain apply.
	24	* @scl_is_output_only: SCL output drivers cannot be turned off.
	25	*/
	26	struct i2c_gpio_platform_data {
1c23af90 HS	27	int udelay;
	28	int timeout;
	29	unsigned int sda_is_open_drain:1;
	30	unsigned int scl_is_open_drain:1;
	31	unsigned int scl_is_output_only:1;
	32	};
	33
	34	#endif /* _LINUX_I2C_GPIO_H */