]> git.proxmox.com Git - mirror_ubuntu-eoan-kernel.git/blame - include/linux/mfd/cros_ec_commands.h
Merge tag 'omap-for-v5.0/fixes-rc7-signed' of git://git.kernel.org/pub/scm/linux...
[mirror_ubuntu-eoan-kernel.git] / include / linux / mfd / cros_ec_commands.h
CommitLineData
deaf39ef
SG
1/*
2 * Host communication command constants for ChromeOS EC
3 *
4 * Copyright (C) 2012 Google, Inc
5 *
6 * This software is licensed under the terms of the GNU General Public
7 * License version 2, as published by the Free Software Foundation, and
8 * may be copied, distributed, and modified under those terms.
9 *
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
14 *
15 * The ChromeOS EC multi function device is used to mux all the requests
16 * to the EC device for its multiple features: keyboard controller,
17 * battery charging and regulator control, firmware update.
18 *
19 * NOTE: This file is copied verbatim from the ChromeOS EC Open Source
20 * project in an attempt to make future updates easy to make.
21 */
22
23#ifndef __CROS_EC_COMMANDS_H
24#define __CROS_EC_COMMANDS_H
25
26/*
5271db29 27 * Current version of this protocol
deaf39ef 28 *
5271db29
BR
29 * TODO(crosbug.com/p/11223): This is effectively useless; protocol is
30 * determined in other ways. Remove this once the kernel code no longer
31 * depends on it.
deaf39ef 32 */
deaf39ef
SG
33#define EC_PROTO_VERSION 0x00000002
34
35/* Command version mask */
36#define EC_VER_MASK(version) (1UL << (version))
37
38/* I/O addresses for ACPI commands */
39#define EC_LPC_ADDR_ACPI_DATA 0x62
40#define EC_LPC_ADDR_ACPI_CMD 0x66
41
42/* I/O addresses for host command */
43#define EC_LPC_ADDR_HOST_DATA 0x200
44#define EC_LPC_ADDR_HOST_CMD 0x204
45
46/* I/O addresses for host command args and params */
5271db29
BR
47/* Protocol version 2 */
48#define EC_LPC_ADDR_HOST_ARGS 0x800 /* And 0x801, 0x802, 0x803 */
49#define EC_LPC_ADDR_HOST_PARAM 0x804 /* For version 2 params; size is
50 * EC_PROTO2_MAX_PARAM_SIZE */
51/* Protocol version 3 */
52#define EC_LPC_ADDR_HOST_PACKET 0x800 /* Offset of version 3 packet */
53#define EC_LPC_HOST_PACKET_SIZE 0x100 /* Max size of version 3 packet */
54
55/* The actual block is 0x800-0x8ff, but some BIOSes think it's 0x880-0x8ff
56 * and they tell the kernel that so we have to think of it as two parts. */
57#define EC_HOST_CMD_REGION0 0x800
58#define EC_HOST_CMD_REGION1 0x880
59#define EC_HOST_CMD_REGION_SIZE 0x80
deaf39ef
SG
60
61/* EC command register bit functions */
62#define EC_LPC_CMDR_DATA (1 << 0) /* Data ready for host to read */
63#define EC_LPC_CMDR_PENDING (1 << 1) /* Write pending to EC */
64#define EC_LPC_CMDR_BUSY (1 << 2) /* EC is busy processing a command */
65#define EC_LPC_CMDR_CMD (1 << 3) /* Last host write was a command */
66#define EC_LPC_CMDR_ACPI_BRST (1 << 4) /* Burst mode (not used) */
67#define EC_LPC_CMDR_SCI (1 << 5) /* SCI event is pending */
68#define EC_LPC_CMDR_SMI (1 << 6) /* SMI event is pending */
69
70#define EC_LPC_ADDR_MEMMAP 0x900
71#define EC_MEMMAP_SIZE 255 /* ACPI IO buffer max is 255 bytes */
72#define EC_MEMMAP_TEXT_MAX 8 /* Size of a string in the memory map */
73
74/* The offset address of each type of data in mapped memory. */
5271db29
BR
75#define EC_MEMMAP_TEMP_SENSOR 0x00 /* Temp sensors 0x00 - 0x0f */
76#define EC_MEMMAP_FAN 0x10 /* Fan speeds 0x10 - 0x17 */
77#define EC_MEMMAP_TEMP_SENSOR_B 0x18 /* More temp sensors 0x18 - 0x1f */
78#define EC_MEMMAP_ID 0x20 /* 0x20 == 'E', 0x21 == 'C' */
deaf39ef
SG
79#define EC_MEMMAP_ID_VERSION 0x22 /* Version of data in 0x20 - 0x2f */
80#define EC_MEMMAP_THERMAL_VERSION 0x23 /* Version of data in 0x00 - 0x1f */
81#define EC_MEMMAP_BATTERY_VERSION 0x24 /* Version of data in 0x40 - 0x7f */
82#define EC_MEMMAP_SWITCHES_VERSION 0x25 /* Version of data in 0x30 - 0x33 */
83#define EC_MEMMAP_EVENTS_VERSION 0x26 /* Version of data in 0x34 - 0x3f */
5271db29
BR
84#define EC_MEMMAP_HOST_CMD_FLAGS 0x27 /* Host cmd interface flags (8 bits) */
85/* Unused 0x28 - 0x2f */
86#define EC_MEMMAP_SWITCHES 0x30 /* 8 bits */
87/* Unused 0x31 - 0x33 */
88#define EC_MEMMAP_HOST_EVENTS 0x34 /* 32 bits */
89/* Reserve 0x38 - 0x3f for additional host event-related stuff */
90/* Battery values are all 32 bits */
deaf39ef
SG
91#define EC_MEMMAP_BATT_VOLT 0x40 /* Battery Present Voltage */
92#define EC_MEMMAP_BATT_RATE 0x44 /* Battery Present Rate */
93#define EC_MEMMAP_BATT_CAP 0x48 /* Battery Remaining Capacity */
94#define EC_MEMMAP_BATT_FLAG 0x4c /* Battery State, defined below */
95#define EC_MEMMAP_BATT_DCAP 0x50 /* Battery Design Capacity */
96#define EC_MEMMAP_BATT_DVLT 0x54 /* Battery Design Voltage */
97#define EC_MEMMAP_BATT_LFCC 0x58 /* Battery Last Full Charge Capacity */
98#define EC_MEMMAP_BATT_CCNT 0x5c /* Battery Cycle Count */
5271db29 99/* Strings are all 8 bytes (EC_MEMMAP_TEXT_MAX) */
deaf39ef
SG
100#define EC_MEMMAP_BATT_MFGR 0x60 /* Battery Manufacturer String */
101#define EC_MEMMAP_BATT_MODEL 0x68 /* Battery Model Number String */
102#define EC_MEMMAP_BATT_SERIAL 0x70 /* Battery Serial Number String */
103#define EC_MEMMAP_BATT_TYPE 0x78 /* Battery Type String */
5271db29
BR
104#define EC_MEMMAP_ALS 0x80 /* ALS readings in lux (2 X 16 bits) */
105/* Unused 0x84 - 0x8f */
106#define EC_MEMMAP_ACC_STATUS 0x90 /* Accelerometer status (8 bits )*/
107/* Unused 0x91 */
108#define EC_MEMMAP_ACC_DATA 0x92 /* Accelerometer data 0x92 - 0x9f */
109#define EC_MEMMAP_GYRO_DATA 0xa0 /* Gyroscope data 0xa0 - 0xa5 */
110/* Unused 0xa6 - 0xfe (remember, 0xff is NOT part of the memmap region) */
111
112
113/* Define the format of the accelerometer mapped memory status byte. */
114#define EC_MEMMAP_ACC_STATUS_SAMPLE_ID_MASK 0x0f
115#define EC_MEMMAP_ACC_STATUS_BUSY_BIT (1 << 4)
116#define EC_MEMMAP_ACC_STATUS_PRESENCE_BIT (1 << 7)
deaf39ef
SG
117
118/* Number of temp sensors at EC_MEMMAP_TEMP_SENSOR */
119#define EC_TEMP_SENSOR_ENTRIES 16
120/*
121 * Number of temp sensors at EC_MEMMAP_TEMP_SENSOR_B.
122 *
123 * Valid only if EC_MEMMAP_THERMAL_VERSION returns >= 2.
124 */
125#define EC_TEMP_SENSOR_B_ENTRIES 8
5271db29
BR
126
127/* Special values for mapped temperature sensors */
deaf39ef
SG
128#define EC_TEMP_SENSOR_NOT_PRESENT 0xff
129#define EC_TEMP_SENSOR_ERROR 0xfe
130#define EC_TEMP_SENSOR_NOT_POWERED 0xfd
131#define EC_TEMP_SENSOR_NOT_CALIBRATED 0xfc
132/*
133 * The offset of temperature value stored in mapped memory. This allows
134 * reporting a temperature range of 200K to 454K = -73C to 181C.
135 */
136#define EC_TEMP_SENSOR_OFFSET 200
137
5271db29
BR
138/*
139 * Number of ALS readings at EC_MEMMAP_ALS
140 */
141#define EC_ALS_ENTRIES 2
142
143/*
144 * The default value a temperature sensor will return when it is present but
145 * has not been read this boot. This is a reasonable number to avoid
146 * triggering alarms on the host.
147 */
148#define EC_TEMP_SENSOR_DEFAULT (296 - EC_TEMP_SENSOR_OFFSET)
149
deaf39ef
SG
150#define EC_FAN_SPEED_ENTRIES 4 /* Number of fans at EC_MEMMAP_FAN */
151#define EC_FAN_SPEED_NOT_PRESENT 0xffff /* Entry not present */
152#define EC_FAN_SPEED_STALLED 0xfffe /* Fan stalled */
153
154/* Battery bit flags at EC_MEMMAP_BATT_FLAG. */
155#define EC_BATT_FLAG_AC_PRESENT 0x01
156#define EC_BATT_FLAG_BATT_PRESENT 0x02
157#define EC_BATT_FLAG_DISCHARGING 0x04
158#define EC_BATT_FLAG_CHARGING 0x08
159#define EC_BATT_FLAG_LEVEL_CRITICAL 0x10
160
161/* Switch flags at EC_MEMMAP_SWITCHES */
162#define EC_SWITCH_LID_OPEN 0x01
163#define EC_SWITCH_POWER_BUTTON_PRESSED 0x02
164#define EC_SWITCH_WRITE_PROTECT_DISABLED 0x04
5271db29
BR
165/* Was recovery requested via keyboard; now unused. */
166#define EC_SWITCH_IGNORE1 0x08
deaf39ef
SG
167/* Recovery requested via dedicated signal (from servo board) */
168#define EC_SWITCH_DEDICATED_RECOVERY 0x10
169/* Was fake developer mode switch; now unused. Remove in next refactor. */
170#define EC_SWITCH_IGNORE0 0x20
171
172/* Host command interface flags */
173/* Host command interface supports LPC args (LPC interface only) */
174#define EC_HOST_CMD_FLAG_LPC_ARGS_SUPPORTED 0x01
5271db29
BR
175/* Host command interface supports version 3 protocol */
176#define EC_HOST_CMD_FLAG_VERSION_3 0x02
deaf39ef
SG
177
178/* Wireless switch flags */
5271db29
BR
179#define EC_WIRELESS_SWITCH_ALL ~0x00 /* All flags */
180#define EC_WIRELESS_SWITCH_WLAN 0x01 /* WLAN radio */
181#define EC_WIRELESS_SWITCH_BLUETOOTH 0x02 /* Bluetooth radio */
182#define EC_WIRELESS_SWITCH_WWAN 0x04 /* WWAN power */
183#define EC_WIRELESS_SWITCH_WLAN_POWER 0x08 /* WLAN power */
deaf39ef
SG
184
185/*
186 * This header file is used in coreboot both in C and ACPI code. The ACPI code
187 * is pre-processed to handle constants but the ASL compiler is unable to
188 * handle actual C code so keep it separate.
189 */
190#ifndef __ACPI__
191
5271db29
BR
192/*
193 * Define __packed if someone hasn't beat us to it. Linux kernel style
194 * checking prefers __packed over __attribute__((packed)).
195 */
196#ifndef __packed
197#define __packed __attribute__((packed))
198#endif
199
deaf39ef
SG
200/* LPC command status byte masks */
201/* EC has written a byte in the data register and host hasn't read it yet */
202#define EC_LPC_STATUS_TO_HOST 0x01
203/* Host has written a command/data byte and the EC hasn't read it yet */
204#define EC_LPC_STATUS_FROM_HOST 0x02
205/* EC is processing a command */
206#define EC_LPC_STATUS_PROCESSING 0x04
207/* Last write to EC was a command, not data */
208#define EC_LPC_STATUS_LAST_CMD 0x08
209/* EC is in burst mode. Unsupported by Chrome EC, so this bit is never set */
210#define EC_LPC_STATUS_BURST_MODE 0x10
211/* SCI event is pending (requesting SCI query) */
212#define EC_LPC_STATUS_SCI_PENDING 0x20
213/* SMI event is pending (requesting SMI query) */
214#define EC_LPC_STATUS_SMI_PENDING 0x40
215/* (reserved) */
216#define EC_LPC_STATUS_RESERVED 0x80
217
218/*
219 * EC is busy. This covers both the EC processing a command, and the host has
220 * written a new command but the EC hasn't picked it up yet.
221 */
222#define EC_LPC_STATUS_BUSY_MASK \
223 (EC_LPC_STATUS_FROM_HOST | EC_LPC_STATUS_PROCESSING)
224
225/* Host command response codes */
226enum ec_status {
227 EC_RES_SUCCESS = 0,
228 EC_RES_INVALID_COMMAND = 1,
229 EC_RES_ERROR = 2,
230 EC_RES_INVALID_PARAM = 3,
231 EC_RES_ACCESS_DENIED = 4,
232 EC_RES_INVALID_RESPONSE = 5,
233 EC_RES_INVALID_VERSION = 6,
234 EC_RES_INVALID_CHECKSUM = 7,
235 EC_RES_IN_PROGRESS = 8, /* Accepted, command in progress */
236 EC_RES_UNAVAILABLE = 9, /* No response available */
237 EC_RES_TIMEOUT = 10, /* We got a timeout */
238 EC_RES_OVERFLOW = 11, /* Table / data overflow */
5271db29
BR
239 EC_RES_INVALID_HEADER = 12, /* Header contains invalid data */
240 EC_RES_REQUEST_TRUNCATED = 13, /* Didn't get the entire request */
241 EC_RES_RESPONSE_TOO_BIG = 14 /* Response was too big to handle */
deaf39ef
SG
242};
243
244/*
245 * Host event codes. Note these are 1-based, not 0-based, because ACPI query
246 * EC command uses code 0 to mean "no event pending". We explicitly specify
247 * each value in the enum listing so they won't change if we delete/insert an
248 * item or rearrange the list (it needs to be stable across platforms, not
249 * just within a single compiled instance).
250 */
251enum host_event_code {
252 EC_HOST_EVENT_LID_CLOSED = 1,
253 EC_HOST_EVENT_LID_OPEN = 2,
254 EC_HOST_EVENT_POWER_BUTTON = 3,
255 EC_HOST_EVENT_AC_CONNECTED = 4,
256 EC_HOST_EVENT_AC_DISCONNECTED = 5,
257 EC_HOST_EVENT_BATTERY_LOW = 6,
258 EC_HOST_EVENT_BATTERY_CRITICAL = 7,
259 EC_HOST_EVENT_BATTERY = 8,
260 EC_HOST_EVENT_THERMAL_THRESHOLD = 9,
261 EC_HOST_EVENT_THERMAL_OVERLOAD = 10,
262 EC_HOST_EVENT_THERMAL = 11,
263 EC_HOST_EVENT_USB_CHARGER = 12,
264 EC_HOST_EVENT_KEY_PRESSED = 13,
265 /*
266 * EC has finished initializing the host interface. The host can check
267 * for this event following sending a EC_CMD_REBOOT_EC command to
268 * determine when the EC is ready to accept subsequent commands.
269 */
270 EC_HOST_EVENT_INTERFACE_READY = 14,
271 /* Keyboard recovery combo has been pressed */
272 EC_HOST_EVENT_KEYBOARD_RECOVERY = 15,
273
274 /* Shutdown due to thermal overload */
275 EC_HOST_EVENT_THERMAL_SHUTDOWN = 16,
276 /* Shutdown due to battery level too low */
277 EC_HOST_EVENT_BATTERY_SHUTDOWN = 17,
278
5271db29
BR
279 /* Suggest that the AP throttle itself */
280 EC_HOST_EVENT_THROTTLE_START = 18,
281 /* Suggest that the AP resume normal speed */
282 EC_HOST_EVENT_THROTTLE_STOP = 19,
283
284 /* Hang detect logic detected a hang and host event timeout expired */
285 EC_HOST_EVENT_HANG_DETECT = 20,
286 /* Hang detect logic detected a hang and warm rebooted the AP */
287 EC_HOST_EVENT_HANG_REBOOT = 21,
c6983166
BL
288 /* PD MCU triggering host event */
289 EC_HOST_EVENT_PD_MCU = 22,
290
291 /* EC desires to change state of host-controlled USB mux */
292 EC_HOST_EVENT_USB_MUX = 28,
5271db29 293
3eff6d2c
SB
294 /* EC RTC event occurred */
295 EC_HOST_EVENT_RTC = 26,
296
deaf39ef
SG
297 /*
298 * The high bit of the event mask is not used as a host event code. If
299 * it reads back as set, then the entire event mask should be
300 * considered invalid by the host. This can happen when reading the
301 * raw event status via EC_MEMMAP_HOST_EVENTS but the LPC interface is
302 * not initialized on the EC, or improperly configured on the host.
303 */
304 EC_HOST_EVENT_INVALID = 32
305};
306/* Host event mask */
307#define EC_HOST_EVENT_MASK(event_code) (1UL << ((event_code) - 1))
308
e2bbf91c
EBS
309/**
310 * struct ec_lpc_host_args - Arguments at EC_LPC_ADDR_HOST_ARGS
311 * @flags: The host argument flags.
312 * @command_version: Command version.
313 * @data_size: The length of data.
314 * @checksum: Checksum; sum of command + flags + command_version + data_size +
315 * all params/response data bytes.
316 */
deaf39ef
SG
317struct ec_lpc_host_args {
318 uint8_t flags;
319 uint8_t command_version;
320 uint8_t data_size;
deaf39ef
SG
321 uint8_t checksum;
322} __packed;
323
324/* Flags for ec_lpc_host_args.flags */
325/*
326 * Args are from host. Data area at EC_LPC_ADDR_HOST_PARAM contains command
327 * params.
328 *
329 * If EC gets a command and this flag is not set, this is an old-style command.
330 * Command version is 0 and params from host are at EC_LPC_ADDR_OLD_PARAM with
331 * unknown length. EC must respond with an old-style response (that is,
332 * withouth setting EC_HOST_ARGS_FLAG_TO_HOST).
333 */
334#define EC_HOST_ARGS_FLAG_FROM_HOST 0x01
335/*
336 * Args are from EC. Data area at EC_LPC_ADDR_HOST_PARAM contains response.
337 *
338 * If EC responds to a command and this flag is not set, this is an old-style
339 * response. Command version is 0 and response data from EC is at
340 * EC_LPC_ADDR_OLD_PARAM with unknown length.
341 */
342#define EC_HOST_ARGS_FLAG_TO_HOST 0x02
343
5271db29
BR
344/*****************************************************************************/
345/*
346 * Byte codes returned by EC over SPI interface.
347 *
348 * These can be used by the AP to debug the EC interface, and to determine
349 * when the EC is not in a state where it will ever get around to responding
350 * to the AP.
351 *
352 * Example of sequence of bytes read from EC for a current good transfer:
353 * 1. - - AP asserts chip select (CS#)
354 * 2. EC_SPI_OLD_READY - AP sends first byte(s) of request
355 * 3. - - EC starts handling CS# interrupt
356 * 4. EC_SPI_RECEIVING - AP sends remaining byte(s) of request
357 * 5. EC_SPI_PROCESSING - EC starts processing request; AP is clocking in
358 * bytes looking for EC_SPI_FRAME_START
359 * 6. - - EC finishes processing and sets up response
360 * 7. EC_SPI_FRAME_START - AP reads frame byte
361 * 8. (response packet) - AP reads response packet
362 * 9. EC_SPI_PAST_END - Any additional bytes read by AP
363 * 10 - - AP deasserts chip select
364 * 11 - - EC processes CS# interrupt and sets up DMA for
365 * next request
366 *
367 * If the AP is waiting for EC_SPI_FRAME_START and sees any value other than
368 * the following byte values:
369 * EC_SPI_OLD_READY
370 * EC_SPI_RX_READY
371 * EC_SPI_RECEIVING
372 * EC_SPI_PROCESSING
373 *
374 * Then the EC found an error in the request, or was not ready for the request
375 * and lost data. The AP should give up waiting for EC_SPI_FRAME_START,
376 * because the EC is unable to tell when the AP is done sending its request.
377 */
378
379/*
380 * Framing byte which precedes a response packet from the EC. After sending a
381 * request, the AP will clock in bytes until it sees the framing byte, then
382 * clock in the response packet.
383 */
384#define EC_SPI_FRAME_START 0xec
385
386/*
387 * Padding bytes which are clocked out after the end of a response packet.
388 */
389#define EC_SPI_PAST_END 0xed
390
391/*
392 * EC is ready to receive, and has ignored the byte sent by the AP. EC expects
393 * that the AP will send a valid packet header (starting with
394 * EC_COMMAND_PROTOCOL_3) in the next 32 bytes.
395 */
396#define EC_SPI_RX_READY 0xf8
397
398/*
399 * EC has started receiving the request from the AP, but hasn't started
400 * processing it yet.
401 */
402#define EC_SPI_RECEIVING 0xf9
403
404/* EC has received the entire request from the AP and is processing it. */
405#define EC_SPI_PROCESSING 0xfa
406
407/*
408 * EC received bad data from the AP, such as a packet header with an invalid
409 * length. EC will ignore all data until chip select deasserts.
410 */
411#define EC_SPI_RX_BAD_DATA 0xfb
412
413/*
414 * EC received data from the AP before it was ready. That is, the AP asserted
415 * chip select and started clocking data before the EC was ready to receive it.
416 * EC will ignore all data until chip select deasserts.
417 */
418#define EC_SPI_NOT_READY 0xfc
419
420/*
421 * EC was ready to receive a request from the AP. EC has treated the byte sent
422 * by the AP as part of a request packet, or (for old-style ECs) is processing
423 * a fully received packet but is not ready to respond yet.
424 */
425#define EC_SPI_OLD_READY 0xfd
426
427/*****************************************************************************/
428
429/*
430 * Protocol version 2 for I2C and SPI send a request this way:
431 *
432 * 0 EC_CMD_VERSION0 + (command version)
433 * 1 Command number
434 * 2 Length of params = N
435 * 3..N+2 Params, if any
436 * N+3 8-bit checksum of bytes 0..N+2
437 *
438 * The corresponding response is:
439 *
440 * 0 Result code (EC_RES_*)
441 * 1 Length of params = M
442 * 2..M+1 Params, if any
443 * M+2 8-bit checksum of bytes 0..M+1
444 */
445#define EC_PROTO2_REQUEST_HEADER_BYTES 3
446#define EC_PROTO2_REQUEST_TRAILER_BYTES 1
447#define EC_PROTO2_REQUEST_OVERHEAD (EC_PROTO2_REQUEST_HEADER_BYTES + \
448 EC_PROTO2_REQUEST_TRAILER_BYTES)
449
450#define EC_PROTO2_RESPONSE_HEADER_BYTES 2
451#define EC_PROTO2_RESPONSE_TRAILER_BYTES 1
452#define EC_PROTO2_RESPONSE_OVERHEAD (EC_PROTO2_RESPONSE_HEADER_BYTES + \
453 EC_PROTO2_RESPONSE_TRAILER_BYTES)
454
455/* Parameter length was limited by the LPC interface */
456#define EC_PROTO2_MAX_PARAM_SIZE 0xfc
457
458/* Maximum request and response packet sizes for protocol version 2 */
459#define EC_PROTO2_MAX_REQUEST_SIZE (EC_PROTO2_REQUEST_OVERHEAD + \
460 EC_PROTO2_MAX_PARAM_SIZE)
461#define EC_PROTO2_MAX_RESPONSE_SIZE (EC_PROTO2_RESPONSE_OVERHEAD + \
462 EC_PROTO2_MAX_PARAM_SIZE)
463
464/*****************************************************************************/
465
466/*
467 * Value written to legacy command port / prefix byte to indicate protocol
468 * 3+ structs are being used. Usage is bus-dependent.
469 */
470#define EC_COMMAND_PROTOCOL_3 0xda
471
472#define EC_HOST_REQUEST_VERSION 3
473
e2bbf91c
EBS
474/**
475 * struct ec_host_request - Version 3 request from host.
476 * @struct_version: Should be 3. The EC will return EC_RES_INVALID_HEADER if it
477 * receives a header with a version it doesn't know how to
478 * parse.
479 * @checksum: Checksum of request and data; sum of all bytes including checksum
480 * should total to 0.
481 * @command: Command to send (EC_CMD_...)
482 * @command_version: Command version.
483 * @reserved: Unused byte in current protocol version; set to 0.
484 * @data_len: Length of data which follows this header.
485 */
5271db29 486struct ec_host_request {
5271db29 487 uint8_t struct_version;
5271db29 488 uint8_t checksum;
5271db29 489 uint16_t command;
5271db29 490 uint8_t command_version;
5271db29 491 uint8_t reserved;
5271db29
BR
492 uint16_t data_len;
493} __packed;
494
495#define EC_HOST_RESPONSE_VERSION 3
496
e2bbf91c
EBS
497/**
498 * struct ec_host_response - Version 3 response from EC.
499 * @struct_version: Struct version (=3).
500 * @checksum: Checksum of response and data; sum of all bytes including
501 * checksum should total to 0.
502 * @result: EC's response to the command (separate from communication failure)
503 * @data_len: Length of data which follows this header.
504 * @reserved: Unused bytes in current protocol version; set to 0.
505 */
5271db29 506struct ec_host_response {
5271db29 507 uint8_t struct_version;
5271db29 508 uint8_t checksum;
5271db29 509 uint16_t result;
5271db29 510 uint16_t data_len;
5271db29
BR
511 uint16_t reserved;
512} __packed;
513
514/*****************************************************************************/
deaf39ef
SG
515/*
516 * Notes on commands:
517 *
256ab950 518 * Each command is an 16-bit command value. Commands which take params or
deaf39ef
SG
519 * return response data specify structs for that data. If no struct is
520 * specified, the command does not input or output data, respectively.
521 * Parameter/response length is implicit in the structs. Some underlying
522 * communication protocols (I2C, SPI) may add length or checksum headers, but
523 * those are implementation-dependent and not defined here.
524 */
525
526/*****************************************************************************/
527/* General / test commands */
528
529/*
530 * Get protocol version, used to deal with non-backward compatible protocol
531 * changes.
532 */
533#define EC_CMD_PROTO_VERSION 0x00
534
e2bbf91c
EBS
535/**
536 * struct ec_response_proto_version - Response to the proto version command.
537 * @version: The protocol version.
538 */
deaf39ef
SG
539struct ec_response_proto_version {
540 uint32_t version;
541} __packed;
542
543/*
544 * Hello. This is a simple command to test the EC is responsive to
545 * commands.
546 */
547#define EC_CMD_HELLO 0x01
548
e2bbf91c
EBS
549/**
550 * struct ec_params_hello - Parameters to the hello command.
551 * @in_data: Pass anything here.
552 */
deaf39ef 553struct ec_params_hello {
e2bbf91c 554 uint32_t in_data;
deaf39ef
SG
555} __packed;
556
e2bbf91c
EBS
557/**
558 * struct ec_response_hello - Response to the hello command.
559 * @out_data: Output will be in_data + 0x01020304.
560 */
deaf39ef 561struct ec_response_hello {
e2bbf91c 562 uint32_t out_data;
deaf39ef
SG
563} __packed;
564
565/* Get version number */
566#define EC_CMD_GET_VERSION 0x02
567
568enum ec_current_image {
569 EC_IMAGE_UNKNOWN = 0,
570 EC_IMAGE_RO,
571 EC_IMAGE_RW
572};
573
e2bbf91c
EBS
574/**
575 * struct ec_response_get_version - Response to the get version command.
576 * @version_string_ro: Null-terminated RO firmware version string.
577 * @version_string_rw: Null-terminated RW firmware version string.
578 * @reserved: Unused bytes; was previously RW-B firmware version string.
579 * @current_image: One of ec_current_image.
580 */
deaf39ef 581struct ec_response_get_version {
deaf39ef
SG
582 char version_string_ro[32];
583 char version_string_rw[32];
e2bbf91c
EBS
584 char reserved[32];
585 uint32_t current_image;
deaf39ef
SG
586} __packed;
587
588/* Read test */
589#define EC_CMD_READ_TEST 0x03
590
e2bbf91c
EBS
591/**
592 * struct ec_params_read_test - Parameters for the read test command.
593 * @offset: Starting value for read buffer.
594 * @size: Size to read in bytes.
595 */
deaf39ef 596struct ec_params_read_test {
e2bbf91c
EBS
597 uint32_t offset;
598 uint32_t size;
deaf39ef
SG
599} __packed;
600
e2bbf91c
EBS
601/**
602 * struct ec_response_read_test - Response to the read test command.
603 * @data: Data returned by the read test command.
604 */
deaf39ef
SG
605struct ec_response_read_test {
606 uint32_t data[32];
607} __packed;
608
609/*
610 * Get build information
611 *
612 * Response is null-terminated string.
613 */
614#define EC_CMD_GET_BUILD_INFO 0x04
615
616/* Get chip info */
617#define EC_CMD_GET_CHIP_INFO 0x05
618
e2bbf91c
EBS
619/**
620 * struct ec_response_get_chip_info - Response to the get chip info command.
621 * @vendor: Null-terminated string for chip vendor.
622 * @name: Null-terminated string for chip name.
623 * @revision: Null-terminated string for chip mask version.
624 */
deaf39ef 625struct ec_response_get_chip_info {
deaf39ef
SG
626 char vendor[32];
627 char name[32];
e2bbf91c 628 char revision[32];
deaf39ef
SG
629} __packed;
630
631/* Get board HW version */
632#define EC_CMD_GET_BOARD_VERSION 0x06
633
e2bbf91c
EBS
634/**
635 * struct ec_response_board_version - Response to the board version command.
636 * @board_version: A monotonously incrementing number.
637 */
deaf39ef 638struct ec_response_board_version {
e2bbf91c 639 uint16_t board_version;
deaf39ef
SG
640} __packed;
641
642/*
643 * Read memory-mapped data.
644 *
645 * This is an alternate interface to memory-mapped data for bus protocols
646 * which don't support direct-mapped memory - I2C, SPI, etc.
647 *
648 * Response is params.size bytes of data.
649 */
650#define EC_CMD_READ_MEMMAP 0x07
651
e2bbf91c
EBS
652/**
653 * struct ec_params_read_memmap - Parameters for the read memory map command.
654 * @offset: Offset in memmap (EC_MEMMAP_*).
655 * @size: Size to read in bytes.
656 */
deaf39ef 657struct ec_params_read_memmap {
e2bbf91c
EBS
658 uint8_t offset;
659 uint8_t size;
deaf39ef
SG
660} __packed;
661
662/* Read versions supported for a command */
663#define EC_CMD_GET_CMD_VERSIONS 0x08
664
e2bbf91c
EBS
665/**
666 * struct ec_params_get_cmd_versions - Parameters for the get command versions.
667 * @cmd: Command to check.
668 */
deaf39ef 669struct ec_params_get_cmd_versions {
e2bbf91c 670 uint8_t cmd;
deaf39ef
SG
671} __packed;
672
e2bbf91c
EBS
673/**
674 * struct ec_params_get_cmd_versions_v1 - Parameters for the get command
675 * versions (v1)
676 * @cmd: Command to check.
677 */
0aa877c5 678struct ec_params_get_cmd_versions_v1 {
e2bbf91c 679 uint16_t cmd;
0aa877c5
NB
680} __packed;
681
e2bbf91c
EBS
682/**
683 * struct ec_response_get_cmd_version - Response to the get command versions.
684 * @version_mask: Mask of supported versions; use EC_VER_MASK() to compare with
685 * a desired version.
686 */
deaf39ef 687struct ec_response_get_cmd_versions {
deaf39ef
SG
688 uint32_t version_mask;
689} __packed;
690
691/*
692 * Check EC communcations status (busy). This is needed on i2c/spi but not
693 * on lpc since it has its own out-of-band busy indicator.
694 *
695 * lpc must read the status from the command register. Attempting this on
696 * lpc will overwrite the args/parameter space and corrupt its data.
697 */
698#define EC_CMD_GET_COMMS_STATUS 0x09
699
700/* Avoid using ec_status which is for return values */
701enum ec_comms_status {
702 EC_COMMS_STATUS_PROCESSING = 1 << 0, /* Processing cmd */
703};
704
e2bbf91c
EBS
705/**
706 * struct ec_response_get_comms_status - Response to the get comms status
707 * command.
708 * @flags: Mask of enum ec_comms_status.
709 */
deaf39ef
SG
710struct ec_response_get_comms_status {
711 uint32_t flags; /* Mask of enum ec_comms_status */
712} __packed;
713
5271db29
BR
714/* Fake a variety of responses, purely for testing purposes. */
715#define EC_CMD_TEST_PROTOCOL 0x0a
716
717/* Tell the EC what to send back to us. */
718struct ec_params_test_protocol {
719 uint32_t ec_result;
720 uint32_t ret_len;
721 uint8_t buf[32];
722} __packed;
723
724/* Here it comes... */
725struct ec_response_test_protocol {
726 uint8_t buf[32];
727} __packed;
728
729/* Get prococol information */
730#define EC_CMD_GET_PROTOCOL_INFO 0x0b
731
732/* Flags for ec_response_get_protocol_info.flags */
733/* EC_RES_IN_PROGRESS may be returned if a command is slow */
734#define EC_PROTOCOL_INFO_IN_PROGRESS_SUPPORTED (1 << 0)
735
e2bbf91c
EBS
736/**
737 * struct ec_response_get_protocol_info - Response to the get protocol info.
738 * @protocol_versions: Bitmask of protocol versions supported (1 << n means
739 * version n).
740 * @max_request_packet_size: Maximum request packet size in bytes.
741 * @max_response_packet_size: Maximum response packet size in bytes.
742 * @flags: see EC_PROTOCOL_INFO_*
743 */
5271db29
BR
744struct ec_response_get_protocol_info {
745 /* Fields which exist if at least protocol version 3 supported */
5271db29 746 uint32_t protocol_versions;
5271db29 747 uint16_t max_request_packet_size;
5271db29 748 uint16_t max_response_packet_size;
5271db29
BR
749 uint32_t flags;
750} __packed;
751
752
753/*****************************************************************************/
754/* Get/Set miscellaneous values */
755
756/* The upper byte of .flags tells what to do (nothing means "get") */
757#define EC_GSV_SET 0x80000000
758
e2bbf91c
EBS
759/*
760 * The lower three bytes of .flags identifies the parameter, if that has
761 * meaning for an individual command.
762 */
5271db29
BR
763#define EC_GSV_PARAM_MASK 0x00ffffff
764
765struct ec_params_get_set_value {
766 uint32_t flags;
767 uint32_t value;
768} __packed;
769
770struct ec_response_get_set_value {
771 uint32_t flags;
772 uint32_t value;
773} __packed;
774
775/* More than one command can use these structs to get/set paramters. */
776#define EC_CMD_GSV_PAUSE_IN_S5 0x0c
777
e4244ebd
VP
778/*****************************************************************************/
779/* List the features supported by the firmware */
780#define EC_CMD_GET_FEATURES 0x0d
781
782/* Supported features */
783enum ec_feature_code {
784 /*
785 * This image contains a limited set of features. Another image
786 * in RW partition may support more features.
787 */
788 EC_FEATURE_LIMITED = 0,
789 /*
790 * Commands for probing/reading/writing/erasing the flash in the
791 * EC are present.
792 */
793 EC_FEATURE_FLASH = 1,
794 /*
795 * Can control the fan speed directly.
796 */
797 EC_FEATURE_PWM_FAN = 2,
798 /*
799 * Can control the intensity of the keyboard backlight.
800 */
801 EC_FEATURE_PWM_KEYB = 3,
802 /*
803 * Support Google lightbar, introduced on Pixel.
804 */
805 EC_FEATURE_LIGHTBAR = 4,
806 /* Control of LEDs */
807 EC_FEATURE_LED = 5,
808 /* Exposes an interface to control gyro and sensors.
809 * The host goes through the EC to access these sensors.
810 * In addition, the EC may provide composite sensors, like lid angle.
811 */
812 EC_FEATURE_MOTION_SENSE = 6,
813 /* The keyboard is controlled by the EC */
814 EC_FEATURE_KEYB = 7,
815 /* The AP can use part of the EC flash as persistent storage. */
816 EC_FEATURE_PSTORE = 8,
817 /* The EC monitors BIOS port 80h, and can return POST codes. */
818 EC_FEATURE_PORT80 = 9,
819 /*
820 * Thermal management: include TMP specific commands.
821 * Higher level than direct fan control.
822 */
823 EC_FEATURE_THERMAL = 10,
824 /* Can switch the screen backlight on/off */
825 EC_FEATURE_BKLIGHT_SWITCH = 11,
826 /* Can switch the wifi module on/off */
827 EC_FEATURE_WIFI_SWITCH = 12,
828 /* Monitor host events, through for example SMI or SCI */
829 EC_FEATURE_HOST_EVENTS = 13,
830 /* The EC exposes GPIO commands to control/monitor connected devices. */
831 EC_FEATURE_GPIO = 14,
832 /* The EC can send i2c messages to downstream devices. */
833 EC_FEATURE_I2C = 15,
834 /* Command to control charger are included */
835 EC_FEATURE_CHARGER = 16,
836 /* Simple battery support. */
837 EC_FEATURE_BATTERY = 17,
838 /*
839 * Support Smart battery protocol
840 * (Common Smart Battery System Interface Specification)
841 */
842 EC_FEATURE_SMART_BATTERY = 18,
843 /* EC can dectect when the host hangs. */
844 EC_FEATURE_HANG_DETECT = 19,
845 /* Report power information, for pit only */
846 EC_FEATURE_PMU = 20,
847 /* Another Cros EC device is present downstream of this one */
848 EC_FEATURE_SUB_MCU = 21,
849 /* Support USB Power delivery (PD) commands */
850 EC_FEATURE_USB_PD = 22,
851 /* Control USB multiplexer, for audio through USB port for instance. */
852 EC_FEATURE_USB_MUX = 23,
853 /* Motion Sensor code has an internal software FIFO */
854 EC_FEATURE_MOTION_SENSE_FIFO = 24,
3eff6d2c
SB
855 /* EC has RTC feature that can be controlled by host commands */
856 EC_FEATURE_RTC = 27,
f47674e5
NA
857 /* EC supports CEC commands */
858 EC_FEATURE_CEC = 35,
e4244ebd
VP
859};
860
861#define EC_FEATURE_MASK_0(event_code) (1UL << (event_code % 32))
862#define EC_FEATURE_MASK_1(event_code) (1UL << (event_code - 32))
e2bbf91c 863
e4244ebd
VP
864struct ec_response_get_features {
865 uint32_t flags[2];
866} __packed;
deaf39ef
SG
867
868/*****************************************************************************/
869/* Flash commands */
870
871/* Get flash info */
872#define EC_CMD_FLASH_INFO 0x10
873
e2bbf91c
EBS
874/**
875 * struct ec_response_flash_info - Response to the flash info command.
876 * @flash_size: Usable flash size in bytes.
877 * @write_block_size: Write block size. Write offset and size must be a
878 * multiple of this.
879 * @erase_block_size: Erase block size. Erase offset and size must be a
880 * multiple of this.
881 * @protect_block_size: Protection block size. Protection offset and size
882 * must be a multiple of this.
883 *
884 * Version 0 returns these fields.
885 */
deaf39ef 886struct ec_response_flash_info {
deaf39ef 887 uint32_t flash_size;
deaf39ef 888 uint32_t write_block_size;
deaf39ef 889 uint32_t erase_block_size;
deaf39ef
SG
890 uint32_t protect_block_size;
891} __packed;
892
5271db29
BR
893/* Flags for version 1+ flash info command */
894/* EC flash erases bits to 0 instead of 1 */
895#define EC_FLASH_INFO_ERASE_TO_0 (1 << 0)
896
e2bbf91c
EBS
897/**
898 * struct ec_response_flash_info_1 - Response to the flash info v1 command.
899 * @flash_size: Usable flash size in bytes.
900 * @write_block_size: Write block size. Write offset and size must be a
901 * multiple of this.
902 * @erase_block_size: Erase block size. Erase offset and size must be a
903 * multiple of this.
904 * @protect_block_size: Protection block size. Protection offset and size
905 * must be a multiple of this.
906 * @write_ideal_size: Ideal write size in bytes. Writes will be fastest if
907 * size is exactly this and offset is a multiple of this.
908 * For example, an EC may have a write buffer which can do
909 * half-page operations if data is aligned, and a slower
910 * word-at-a-time write mode.
911 * @flags: Flags; see EC_FLASH_INFO_*
912 *
5271db29
BR
913 * Version 1 returns the same initial fields as version 0, with additional
914 * fields following.
915 *
916 * gcc anonymous structs don't seem to get along with the __packed directive;
917 * if they did we'd define the version 0 struct as a sub-struct of this one.
918 */
919struct ec_response_flash_info_1 {
920 /* Version 0 fields; see above for description */
921 uint32_t flash_size;
922 uint32_t write_block_size;
923 uint32_t erase_block_size;
924 uint32_t protect_block_size;
925
926 /* Version 1 adds these fields: */
5271db29 927 uint32_t write_ideal_size;
5271db29
BR
928 uint32_t flags;
929} __packed;
930
deaf39ef
SG
931/*
932 * Read flash
933 *
934 * Response is params.size bytes of data.
935 */
936#define EC_CMD_FLASH_READ 0x11
937
e2bbf91c
EBS
938/**
939 * struct ec_params_flash_read - Parameters for the flash read command.
940 * @offset: Byte offset to read.
941 * @size: Size to read in bytes.
942 */
deaf39ef 943struct ec_params_flash_read {
e2bbf91c
EBS
944 uint32_t offset;
945 uint32_t size;
deaf39ef
SG
946} __packed;
947
948/* Write flash */
949#define EC_CMD_FLASH_WRITE 0x12
5271db29
BR
950#define EC_VER_FLASH_WRITE 1
951
952/* Version 0 of the flash command supported only 64 bytes of data */
953#define EC_FLASH_WRITE_VER0_SIZE 64
deaf39ef 954
e2bbf91c
EBS
955/**
956 * struct ec_params_flash_write - Parameters for the flash write command.
957 * @offset: Byte offset to write.
958 * @size: Size to write in bytes.
959 */
deaf39ef 960struct ec_params_flash_write {
e2bbf91c
EBS
961 uint32_t offset;
962 uint32_t size;
5271db29 963 /* Followed by data to write */
deaf39ef
SG
964} __packed;
965
966/* Erase flash */
967#define EC_CMD_FLASH_ERASE 0x13
968
e2bbf91c
EBS
969/**
970 * struct ec_params_flash_erase - Parameters for the flash erase command.
971 * @offset: Byte offset to erase.
972 * @size: Size to erase in bytes.
973 */
deaf39ef 974struct ec_params_flash_erase {
e2bbf91c
EBS
975 uint32_t offset;
976 uint32_t size;
deaf39ef
SG
977} __packed;
978
979/*
980 * Get/set flash protection.
981 *
982 * If mask!=0, sets/clear the requested bits of flags. Depending on the
983 * firmware write protect GPIO, not all flags will take effect immediately;
984 * some flags require a subsequent hard reset to take effect. Check the
985 * returned flags bits to see what actually happened.
986 *
987 * If mask=0, simply returns the current flags state.
988 */
989#define EC_CMD_FLASH_PROTECT 0x15
990#define EC_VER_FLASH_PROTECT 1 /* Command version 1 */
991
992/* Flags for flash protection */
993/* RO flash code protected when the EC boots */
994#define EC_FLASH_PROTECT_RO_AT_BOOT (1 << 0)
995/*
996 * RO flash code protected now. If this bit is set, at-boot status cannot
997 * be changed.
998 */
999#define EC_FLASH_PROTECT_RO_NOW (1 << 1)
1000/* Entire flash code protected now, until reboot. */
1001#define EC_FLASH_PROTECT_ALL_NOW (1 << 2)
1002/* Flash write protect GPIO is asserted now */
1003#define EC_FLASH_PROTECT_GPIO_ASSERTED (1 << 3)
1004/* Error - at least one bank of flash is stuck locked, and cannot be unlocked */
1005#define EC_FLASH_PROTECT_ERROR_STUCK (1 << 4)
1006/*
1007 * Error - flash protection is in inconsistent state. At least one bank of
1008 * flash which should be protected is not protected. Usually fixed by
1009 * re-requesting the desired flags, or by a hard reset if that fails.
1010 */
1011#define EC_FLASH_PROTECT_ERROR_INCONSISTENT (1 << 5)
1012/* Entile flash code protected when the EC boots */
1013#define EC_FLASH_PROTECT_ALL_AT_BOOT (1 << 6)
1014
e2bbf91c
EBS
1015/**
1016 * struct ec_params_flash_protect - Parameters for the flash protect command.
1017 * @mask: Bits in flags to apply.
1018 * @flags: New flags to apply.
1019 */
deaf39ef 1020struct ec_params_flash_protect {
e2bbf91c
EBS
1021 uint32_t mask;
1022 uint32_t flags;
deaf39ef
SG
1023} __packed;
1024
e2bbf91c
EBS
1025/**
1026 * struct ec_response_flash_protect - Response to the flash protect command.
1027 * @flags: Current value of flash protect flags.
1028 * @valid_flags: Flags which are valid on this platform. This allows the
1029 * caller to distinguish between flags which aren't set vs. flags
1030 * which can't be set on this platform.
1031 * @writable_flags: Flags which can be changed given the current protection
1032 * state.
1033 */
deaf39ef 1034struct ec_response_flash_protect {
deaf39ef 1035 uint32_t flags;
deaf39ef 1036 uint32_t valid_flags;
deaf39ef
SG
1037 uint32_t writable_flags;
1038} __packed;
1039
1040/*
1041 * Note: commands 0x14 - 0x19 version 0 were old commands to get/set flash
1042 * write protect. These commands may be reused with version > 0.
1043 */
1044
1045/* Get the region offset/size */
1046#define EC_CMD_FLASH_REGION_INFO 0x16
1047#define EC_VER_FLASH_REGION_INFO 1
1048
1049enum ec_flash_region {
1050 /* Region which holds read-only EC image */
5271db29 1051 EC_FLASH_REGION_RO = 0,
deaf39ef
SG
1052 /* Region which holds rewritable EC image */
1053 EC_FLASH_REGION_RW,
1054 /*
1055 * Region which should be write-protected in the factory (a superset of
1056 * EC_FLASH_REGION_RO)
1057 */
1058 EC_FLASH_REGION_WP_RO,
5271db29
BR
1059 /* Number of regions */
1060 EC_FLASH_REGION_COUNT,
deaf39ef
SG
1061};
1062
e2bbf91c
EBS
1063/**
1064 * struct ec_params_flash_region_info - Parameters for the flash region info
1065 * command.
1066 * @region: Flash region; see EC_FLASH_REGION_*
1067 */
deaf39ef 1068struct ec_params_flash_region_info {
e2bbf91c 1069 uint32_t region;
deaf39ef
SG
1070} __packed;
1071
1072struct ec_response_flash_region_info {
1073 uint32_t offset;
1074 uint32_t size;
1075} __packed;
1076
1077/* Read/write VbNvContext */
1078#define EC_CMD_VBNV_CONTEXT 0x17
1079#define EC_VER_VBNV_CONTEXT 1
1080#define EC_VBNV_BLOCK_SIZE 16
1081
1082enum ec_vbnvcontext_op {
1083 EC_VBNV_CONTEXT_OP_READ,
1084 EC_VBNV_CONTEXT_OP_WRITE,
1085};
1086
1087struct ec_params_vbnvcontext {
1088 uint32_t op;
1089 uint8_t block[EC_VBNV_BLOCK_SIZE];
1090} __packed;
1091
1092struct ec_response_vbnvcontext {
1093 uint8_t block[EC_VBNV_BLOCK_SIZE];
1094} __packed;
1095
1096/*****************************************************************************/
1097/* PWM commands */
1098
1099/* Get fan target RPM */
1100#define EC_CMD_PWM_GET_FAN_TARGET_RPM 0x20
1101
1102struct ec_response_pwm_get_fan_rpm {
1103 uint32_t rpm;
1104} __packed;
1105
1106/* Set target fan RPM */
1107#define EC_CMD_PWM_SET_FAN_TARGET_RPM 0x21
1108
1109struct ec_params_pwm_set_fan_target_rpm {
1110 uint32_t rpm;
1111} __packed;
1112
1113/* Get keyboard backlight */
1114#define EC_CMD_PWM_GET_KEYBOARD_BACKLIGHT 0x22
1115
1116struct ec_response_pwm_get_keyboard_backlight {
1117 uint8_t percent;
1118 uint8_t enabled;
1119} __packed;
1120
1121/* Set keyboard backlight */
1122#define EC_CMD_PWM_SET_KEYBOARD_BACKLIGHT 0x23
1123
1124struct ec_params_pwm_set_keyboard_backlight {
1125 uint8_t percent;
1126} __packed;
1127
1128/* Set target fan PWM duty cycle */
1129#define EC_CMD_PWM_SET_FAN_DUTY 0x24
1130
1131struct ec_params_pwm_set_fan_duty {
1132 uint32_t percent;
1133} __packed;
1134
2b66bd69
BN
1135#define EC_CMD_PWM_SET_DUTY 0x25
1136/* 16 bit duty cycle, 0xffff = 100% */
1137#define EC_PWM_MAX_DUTY 0xffff
1138
1139enum ec_pwm_type {
1140 /* All types, indexed by board-specific enum pwm_channel */
1141 EC_PWM_TYPE_GENERIC = 0,
1142 /* Keyboard backlight */
1143 EC_PWM_TYPE_KB_LIGHT,
1144 /* Display backlight */
1145 EC_PWM_TYPE_DISPLAY_LIGHT,
1146 EC_PWM_TYPE_COUNT,
1147};
1148
1149struct ec_params_pwm_set_duty {
1150 uint16_t duty; /* Duty cycle, EC_PWM_MAX_DUTY = 100% */
1151 uint8_t pwm_type; /* ec_pwm_type */
1152 uint8_t index; /* Type-specific index, or 0 if unique */
1153} __packed;
1154
1155#define EC_CMD_PWM_GET_DUTY 0x26
1156
1157struct ec_params_pwm_get_duty {
1158 uint8_t pwm_type; /* ec_pwm_type */
1159 uint8_t index; /* Type-specific index, or 0 if unique */
1160} __packed;
1161
1162struct ec_response_pwm_get_duty {
1163 uint16_t duty; /* Duty cycle, EC_PWM_MAX_DUTY = 100% */
1164} __packed;
1165
deaf39ef
SG
1166/*****************************************************************************/
1167/*
1168 * Lightbar commands. This looks worse than it is. Since we only use one HOST
1169 * command to say "talk to the lightbar", we put the "and tell it to do X" part
1170 * into a subcommand. We'll make separate structs for subcommands with
1171 * different input args, so that we know how much to expect.
1172 */
1173#define EC_CMD_LIGHTBAR_CMD 0x28
1174
1175struct rgb_s {
1176 uint8_t r, g, b;
1177};
1178
1179#define LB_BATTERY_LEVELS 4
e2bbf91c
EBS
1180
1181/*
1182 * List of tweakable parameters. NOTE: It's __packed so it can be sent in a
deaf39ef
SG
1183 * host command, but the alignment is the same regardless. Keep it that way.
1184 */
256ab950 1185struct lightbar_params_v0 {
deaf39ef 1186 /* Timing */
5271db29
BR
1187 int32_t google_ramp_up;
1188 int32_t google_ramp_down;
1189 int32_t s3s0_ramp_up;
1190 int32_t s0_tick_delay[2]; /* AC=0/1 */
1191 int32_t s0a_tick_delay[2]; /* AC=0/1 */
1192 int32_t s0s3_ramp_down;
1193 int32_t s3_sleep_for;
1194 int32_t s3_ramp_up;
1195 int32_t s3_ramp_down;
deaf39ef
SG
1196
1197 /* Oscillation */
1198 uint8_t new_s0;
1199 uint8_t osc_min[2]; /* AC=0/1 */
1200 uint8_t osc_max[2]; /* AC=0/1 */
1201 uint8_t w_ofs[2]; /* AC=0/1 */
1202
1203 /* Brightness limits based on the backlight and AC. */
1204 uint8_t bright_bl_off_fixed[2]; /* AC=0/1 */
1205 uint8_t bright_bl_on_min[2]; /* AC=0/1 */
1206 uint8_t bright_bl_on_max[2]; /* AC=0/1 */
1207
1208 /* Battery level thresholds */
1209 uint8_t battery_threshold[LB_BATTERY_LEVELS - 1];
1210
1211 /* Map [AC][battery_level] to color index */
1212 uint8_t s0_idx[2][LB_BATTERY_LEVELS]; /* AP is running */
1213 uint8_t s3_idx[2][LB_BATTERY_LEVELS]; /* AP is sleeping */
1214
1215 /* Color palette */
1216 struct rgb_s color[8]; /* 0-3 are Google colors */
1217} __packed;
1218
256ab950
SB
1219struct lightbar_params_v1 {
1220 /* Timing */
1221 int32_t google_ramp_up;
1222 int32_t google_ramp_down;
1223 int32_t s3s0_ramp_up;
1224 int32_t s0_tick_delay[2]; /* AC=0/1 */
1225 int32_t s0a_tick_delay[2]; /* AC=0/1 */
1226 int32_t s0s3_ramp_down;
1227 int32_t s3_sleep_for;
1228 int32_t s3_ramp_up;
1229 int32_t s3_ramp_down;
1230 int32_t tap_tick_delay;
1231 int32_t tap_display_time;
1232
1233 /* Tap-for-battery params */
1234 uint8_t tap_pct_red;
1235 uint8_t tap_pct_green;
1236 uint8_t tap_seg_min_on;
1237 uint8_t tap_seg_max_on;
1238 uint8_t tap_seg_osc;
1239 uint8_t tap_idx[3];
1240
1241 /* Oscillation */
1242 uint8_t osc_min[2]; /* AC=0/1 */
1243 uint8_t osc_max[2]; /* AC=0/1 */
1244 uint8_t w_ofs[2]; /* AC=0/1 */
1245
1246 /* Brightness limits based on the backlight and AC. */
1247 uint8_t bright_bl_off_fixed[2]; /* AC=0/1 */
1248 uint8_t bright_bl_on_min[2]; /* AC=0/1 */
1249 uint8_t bright_bl_on_max[2]; /* AC=0/1 */
1250
1251 /* Battery level thresholds */
1252 uint8_t battery_threshold[LB_BATTERY_LEVELS - 1];
1253
1254 /* Map [AC][battery_level] to color index */
1255 uint8_t s0_idx[2][LB_BATTERY_LEVELS]; /* AP is running */
1256 uint8_t s3_idx[2][LB_BATTERY_LEVELS]; /* AP is sleeping */
1257
1258 /* Color palette */
1259 struct rgb_s color[8]; /* 0-3 are Google colors */
1260} __packed;
1261
be3ebebf
EC
1262/* Lightbar program */
1263#define EC_LB_PROG_LEN 192
1264struct lightbar_program {
1265 uint8_t size;
1266 uint8_t data[EC_LB_PROG_LEN];
1267};
1268
deaf39ef
SG
1269struct ec_params_lightbar {
1270 uint8_t cmd; /* Command (see enum lightbar_command) */
1271 union {
1272 struct {
1273 /* no args */
256ab950 1274 } dump, off, on, init, get_seq, get_params_v0, get_params_v1,
405c8430 1275 version, get_brightness, get_demo, suspend, resume;
deaf39ef 1276
256ab950 1277 struct {
deaf39ef 1278 uint8_t num;
256ab950 1279 } set_brightness, seq, demo;
deaf39ef 1280
256ab950 1281 struct {
deaf39ef
SG
1282 uint8_t ctrl, reg, value;
1283 } reg;
1284
256ab950 1285 struct {
deaf39ef 1286 uint8_t led, red, green, blue;
256ab950
SB
1287 } set_rgb;
1288
1289 struct {
1290 uint8_t led;
1291 } get_rgb;
deaf39ef 1292
405c8430
EC
1293 struct {
1294 uint8_t enable;
1295 } manual_suspend_ctrl;
1296
256ab950
SB
1297 struct lightbar_params_v0 set_params_v0;
1298 struct lightbar_params_v1 set_params_v1;
be3ebebf 1299 struct lightbar_program set_program;
deaf39ef
SG
1300 };
1301} __packed;
1302
1303struct ec_response_lightbar {
1304 union {
256ab950 1305 struct {
deaf39ef
SG
1306 struct {
1307 uint8_t reg;
1308 uint8_t ic0;
1309 uint8_t ic1;
1310 } vals[23];
1311 } dump;
1312
256ab950 1313 struct {
deaf39ef 1314 uint8_t num;
256ab950 1315 } get_seq, get_brightness, get_demo;
deaf39ef 1316
256ab950
SB
1317 struct lightbar_params_v0 get_params_v0;
1318 struct lightbar_params_v1 get_params_v1;
deaf39ef 1319
256ab950 1320 struct {
5271db29
BR
1321 uint32_t num;
1322 uint32_t flags;
1323 } version;
1324
256ab950
SB
1325 struct {
1326 uint8_t red, green, blue;
1327 } get_rgb;
1328
deaf39ef
SG
1329 struct {
1330 /* no return params */
256ab950 1331 } off, on, init, set_brightness, seq, reg, set_rgb,
be3ebebf 1332 demo, set_params_v0, set_params_v1,
405c8430 1333 set_program, manual_suspend_ctrl, suspend, resume;
deaf39ef
SG
1334 };
1335} __packed;
1336
1337/* Lightbar commands */
1338enum lightbar_command {
1339 LIGHTBAR_CMD_DUMP = 0,
1340 LIGHTBAR_CMD_OFF = 1,
1341 LIGHTBAR_CMD_ON = 2,
1342 LIGHTBAR_CMD_INIT = 3,
256ab950 1343 LIGHTBAR_CMD_SET_BRIGHTNESS = 4,
deaf39ef
SG
1344 LIGHTBAR_CMD_SEQ = 5,
1345 LIGHTBAR_CMD_REG = 6,
256ab950 1346 LIGHTBAR_CMD_SET_RGB = 7,
deaf39ef
SG
1347 LIGHTBAR_CMD_GET_SEQ = 8,
1348 LIGHTBAR_CMD_DEMO = 9,
256ab950
SB
1349 LIGHTBAR_CMD_GET_PARAMS_V0 = 10,
1350 LIGHTBAR_CMD_SET_PARAMS_V0 = 11,
5271db29 1351 LIGHTBAR_CMD_VERSION = 12,
256ab950
SB
1352 LIGHTBAR_CMD_GET_BRIGHTNESS = 13,
1353 LIGHTBAR_CMD_GET_RGB = 14,
1354 LIGHTBAR_CMD_GET_DEMO = 15,
1355 LIGHTBAR_CMD_GET_PARAMS_V1 = 16,
1356 LIGHTBAR_CMD_SET_PARAMS_V1 = 17,
be3ebebf 1357 LIGHTBAR_CMD_SET_PROGRAM = 18,
405c8430
EC
1358 LIGHTBAR_CMD_MANUAL_SUSPEND_CTRL = 19,
1359 LIGHTBAR_CMD_SUSPEND = 20,
1360 LIGHTBAR_CMD_RESUME = 21,
deaf39ef
SG
1361 LIGHTBAR_NUM_CMDS
1362};
1363
5271db29
BR
1364/*****************************************************************************/
1365/* LED control commands */
1366
1367#define EC_CMD_LED_CONTROL 0x29
1368
1369enum ec_led_id {
1370 /* LED to indicate battery state of charge */
1371 EC_LED_ID_BATTERY_LED = 0,
1372 /*
1373 * LED to indicate system power state (on or in suspend).
1374 * May be on power button or on C-panel.
1375 */
1376 EC_LED_ID_POWER_LED,
1377 /* LED on power adapter or its plug */
1378 EC_LED_ID_ADAPTER_LED,
1379
1380 EC_LED_ID_COUNT
1381};
1382
1383/* LED control flags */
1384#define EC_LED_FLAGS_QUERY (1 << 0) /* Query LED capability only */
1385#define EC_LED_FLAGS_AUTO (1 << 1) /* Switch LED back to automatic control */
1386
1387enum ec_led_colors {
1388 EC_LED_COLOR_RED = 0,
1389 EC_LED_COLOR_GREEN,
1390 EC_LED_COLOR_BLUE,
1391 EC_LED_COLOR_YELLOW,
1392 EC_LED_COLOR_WHITE,
1393
1394 EC_LED_COLOR_COUNT
1395};
1396
1397struct ec_params_led_control {
1398 uint8_t led_id; /* Which LED to control */
1399 uint8_t flags; /* Control flags */
1400
1401 uint8_t brightness[EC_LED_COLOR_COUNT];
1402} __packed;
1403
1404struct ec_response_led_control {
1405 /*
1406 * Available brightness value range.
1407 *
1408 * Range 0 means color channel not present.
1409 * Range 1 means on/off control.
1410 * Other values means the LED is control by PWM.
1411 */
1412 uint8_t brightness_range[EC_LED_COLOR_COUNT];
1413} __packed;
1414
deaf39ef
SG
1415/*****************************************************************************/
1416/* Verified boot commands */
1417
1418/*
1419 * Note: command code 0x29 version 0 was VBOOT_CMD in Link EVT; it may be
1420 * reused for other purposes with version > 0.
1421 */
1422
1423/* Verified boot hash command */
1424#define EC_CMD_VBOOT_HASH 0x2A
1425
1426struct ec_params_vboot_hash {
1427 uint8_t cmd; /* enum ec_vboot_hash_cmd */
1428 uint8_t hash_type; /* enum ec_vboot_hash_type */
1429 uint8_t nonce_size; /* Nonce size; may be 0 */
1430 uint8_t reserved0; /* Reserved; set 0 */
1431 uint32_t offset; /* Offset in flash to hash */
1432 uint32_t size; /* Number of bytes to hash */
1433 uint8_t nonce_data[64]; /* Nonce data; ignored if nonce_size=0 */
1434} __packed;
1435
1436struct ec_response_vboot_hash {
1437 uint8_t status; /* enum ec_vboot_hash_status */
1438 uint8_t hash_type; /* enum ec_vboot_hash_type */
1439 uint8_t digest_size; /* Size of hash digest in bytes */
1440 uint8_t reserved0; /* Ignore; will be 0 */
1441 uint32_t offset; /* Offset in flash which was hashed */
1442 uint32_t size; /* Number of bytes hashed */
1443 uint8_t hash_digest[64]; /* Hash digest data */
1444} __packed;
1445
1446enum ec_vboot_hash_cmd {
1447 EC_VBOOT_HASH_GET = 0, /* Get current hash status */
1448 EC_VBOOT_HASH_ABORT = 1, /* Abort calculating current hash */
1449 EC_VBOOT_HASH_START = 2, /* Start computing a new hash */
1450 EC_VBOOT_HASH_RECALC = 3, /* Synchronously compute a new hash */
1451};
1452
1453enum ec_vboot_hash_type {
1454 EC_VBOOT_HASH_TYPE_SHA256 = 0, /* SHA-256 */
1455};
1456
1457enum ec_vboot_hash_status {
1458 EC_VBOOT_HASH_STATUS_NONE = 0, /* No hash (not started, or aborted) */
1459 EC_VBOOT_HASH_STATUS_DONE = 1, /* Finished computing a hash */
1460 EC_VBOOT_HASH_STATUS_BUSY = 2, /* Busy computing a hash */
1461};
1462
1463/*
1464 * Special values for offset for EC_VBOOT_HASH_START and EC_VBOOT_HASH_RECALC.
1465 * If one of these is specified, the EC will automatically update offset and
1466 * size to the correct values for the specified image (RO or RW).
1467 */
1468#define EC_VBOOT_HASH_OFFSET_RO 0xfffffffe
1469#define EC_VBOOT_HASH_OFFSET_RW 0xfffffffd
1470
5271db29
BR
1471/*****************************************************************************/
1472/*
1473 * Motion sense commands. We'll make separate structs for sub-commands with
1474 * different input args, so that we know how much to expect.
1475 */
1476#define EC_CMD_MOTION_SENSE_CMD 0x2B
1477
1478/* Motion sense commands */
1479enum motionsense_command {
1480 /*
1481 * Dump command returns all motion sensor data including motion sense
1482 * module flags and individual sensor flags.
1483 */
1484 MOTIONSENSE_CMD_DUMP = 0,
1485
1486 /*
1487 * Info command returns data describing the details of a given sensor,
1488 * including enum motionsensor_type, enum motionsensor_location, and
1489 * enum motionsensor_chip.
1490 */
1491 MOTIONSENSE_CMD_INFO = 1,
1492
1493 /*
1494 * EC Rate command is a setter/getter command for the EC sampling rate
1495 * of all motion sensors in milliseconds.
1496 */
1497 MOTIONSENSE_CMD_EC_RATE = 2,
1498
1499 /*
1500 * Sensor ODR command is a setter/getter command for the output data
1501 * rate of a specific motion sensor in millihertz.
1502 */
1503 MOTIONSENSE_CMD_SENSOR_ODR = 3,
1504
1505 /*
1506 * Sensor range command is a setter/getter command for the range of
1507 * a specified motion sensor in +/-G's or +/- deg/s.
1508 */
1509 MOTIONSENSE_CMD_SENSOR_RANGE = 4,
1510
1511 /*
1512 * Setter/getter command for the keyboard wake angle. When the lid
1513 * angle is greater than this value, keyboard wake is disabled in S3,
1514 * and when the lid angle goes less than this value, keyboard wake is
1515 * enabled. Note, the lid angle measurement is an approximate,
1516 * un-calibrated value, hence the wake angle isn't exact.
1517 */
1518 MOTIONSENSE_CMD_KB_WAKE_ANGLE = 5,
1519
974e6f02
EBS
1520 /*
1521 * Returns a single sensor data.
1522 */
1523 MOTIONSENSE_CMD_DATA = 6,
1524
1525 /*
1526 * Perform low level calibration.. On sensors that support it, ask to
1527 * do offset calibration.
1528 */
1529 MOTIONSENSE_CMD_PERFORM_CALIB = 10,
1530
1531 /*
1532 * Sensor Offset command is a setter/getter command for the offset used
1533 * for calibration. The offsets can be calculated by the host, or via
1534 * PERFORM_CALIB command.
1535 */
1536 MOTIONSENSE_CMD_SENSOR_OFFSET = 11,
1537
5271db29
BR
1538 /* Number of motionsense sub-commands. */
1539 MOTIONSENSE_NUM_CMDS
1540};
1541
1542enum motionsensor_id {
1543 EC_MOTION_SENSOR_ACCEL_BASE = 0,
1544 EC_MOTION_SENSOR_ACCEL_LID = 1,
1545 EC_MOTION_SENSOR_GYRO = 2,
1546
1547 /*
1548 * Note, if more sensors are added and this count changes, the padding
1549 * in ec_response_motion_sense dump command must be modified.
1550 */
1551 EC_MOTION_SENSOR_COUNT = 3
1552};
1553
1554/* List of motion sensor types. */
1555enum motionsensor_type {
1556 MOTIONSENSE_TYPE_ACCEL = 0,
1557 MOTIONSENSE_TYPE_GYRO = 1,
974e6f02
EBS
1558 MOTIONSENSE_TYPE_MAG = 2,
1559 MOTIONSENSE_TYPE_PROX = 3,
1560 MOTIONSENSE_TYPE_LIGHT = 4,
1561 MOTIONSENSE_TYPE_ACTIVITY = 5,
d732248f
GG
1562 MOTIONSENSE_TYPE_BARO = 6,
1563 MOTIONSENSE_TYPE_MAX,
5271db29
BR
1564};
1565
1566/* List of motion sensor locations. */
1567enum motionsensor_location {
1568 MOTIONSENSE_LOC_BASE = 0,
1569 MOTIONSENSE_LOC_LID = 1,
974e6f02 1570 MOTIONSENSE_LOC_MAX,
5271db29
BR
1571};
1572
1573/* List of motion sensor chips. */
1574enum motionsensor_chip {
1575 MOTIONSENSE_CHIP_KXCJ9 = 0,
1576};
1577
1578/* Module flag masks used for the dump sub-command. */
1579#define MOTIONSENSE_MODULE_FLAG_ACTIVE (1<<0)
1580
1581/* Sensor flag masks used for the dump sub-command. */
1582#define MOTIONSENSE_SENSOR_FLAG_PRESENT (1<<0)
1583
1584/*
1585 * Send this value for the data element to only perform a read. If you
1586 * send any other value, the EC will interpret it as data to set and will
1587 * return the actual value set.
1588 */
1589#define EC_MOTION_SENSE_NO_VALUE -1
1590
974e6f02
EBS
1591#define EC_MOTION_SENSE_INVALID_CALIB_TEMP 0x8000
1592
1593/* Set Calibration information */
1594#define MOTION_SENSE_SET_OFFSET 1
1595
1596struct ec_response_motion_sensor_data {
1597 /* Flags for each sensor. */
1598 uint8_t flags;
1599 /* Sensor number the data comes from */
1600 uint8_t sensor_num;
1601 /* Each sensor is up to 3-axis. */
1602 union {
1603 int16_t data[3];
1604 struct {
1605 uint16_t rsvd;
1606 uint32_t timestamp;
1607 } __packed;
1608 struct {
1609 uint8_t activity; /* motionsensor_activity */
1610 uint8_t state;
1611 int16_t add_info[2];
1612 };
1613 };
1614} __packed;
1615
5271db29
BR
1616struct ec_params_motion_sense {
1617 uint8_t cmd;
1618 union {
1619 /* Used for MOTIONSENSE_CMD_DUMP. */
1620 struct {
1621 /* no args */
1622 } dump;
1623
1624 /*
1625 * Used for MOTIONSENSE_CMD_EC_RATE and
1626 * MOTIONSENSE_CMD_KB_WAKE_ANGLE.
1627 */
1628 struct {
1629 /* Data to set or EC_MOTION_SENSE_NO_VALUE to read. */
1630 int16_t data;
1631 } ec_rate, kb_wake_angle;
1632
974e6f02
EBS
1633 /* Used for MOTIONSENSE_CMD_SENSOR_OFFSET */
1634 struct {
1635 uint8_t sensor_num;
1636
1637 /*
1638 * bit 0: If set (MOTION_SENSE_SET_OFFSET), set
1639 * the calibration information in the EC.
1640 * If unset, just retrieve calibration information.
1641 */
1642 uint16_t flags;
1643
1644 /*
1645 * Temperature at calibration, in units of 0.01 C
1646 * 0x8000: invalid / unknown.
1647 * 0x0: 0C
1648 * 0x7fff: +327.67C
1649 */
1650 int16_t temp;
1651
1652 /*
1653 * Offset for calibration.
1654 * Unit:
1655 * Accelerometer: 1/1024 g
1656 * Gyro: 1/1024 deg/s
1657 * Compass: 1/16 uT
1658 */
1659 int16_t offset[3];
1660 } __packed sensor_offset;
1661
5271db29
BR
1662 /* Used for MOTIONSENSE_CMD_INFO. */
1663 struct {
5271db29
BR
1664 uint8_t sensor_num;
1665 } info;
1666
1667 /*
1668 * Used for MOTIONSENSE_CMD_SENSOR_ODR and
1669 * MOTIONSENSE_CMD_SENSOR_RANGE.
1670 */
1671 struct {
1672 /* Should be element of enum motionsensor_id. */
1673 uint8_t sensor_num;
1674
1675 /* Rounding flag, true for round-up, false for down. */
1676 uint8_t roundup;
1677
1678 uint16_t reserved;
1679
1680 /* Data to set or EC_MOTION_SENSE_NO_VALUE to read. */
1681 int32_t data;
1682 } sensor_odr, sensor_range;
1683 };
1684} __packed;
1685
1686struct ec_response_motion_sense {
1687 union {
1688 /* Used for MOTIONSENSE_CMD_DUMP. */
1689 struct {
1690 /* Flags representing the motion sensor module. */
1691 uint8_t module_flags;
1692
974e6f02
EBS
1693 /* Number of sensors managed directly by the EC. */
1694 uint8_t sensor_count;
5271db29 1695
974e6f02
EBS
1696 /*
1697 * Sensor data is truncated if response_max is too small
1698 * for holding all the data.
1699 */
1700 struct ec_response_motion_sensor_data sensor[0];
5271db29
BR
1701 } dump;
1702
1703 /* Used for MOTIONSENSE_CMD_INFO. */
1704 struct {
1705 /* Should be element of enum motionsensor_type. */
1706 uint8_t type;
1707
1708 /* Should be element of enum motionsensor_location. */
1709 uint8_t location;
1710
1711 /* Should be element of enum motionsensor_chip. */
1712 uint8_t chip;
1713 } info;
1714
974e6f02
EBS
1715 /* Used for MOTIONSENSE_CMD_DATA */
1716 struct ec_response_motion_sensor_data data;
1717
5271db29
BR
1718 /*
1719 * Used for MOTIONSENSE_CMD_EC_RATE, MOTIONSENSE_CMD_SENSOR_ODR,
1720 * MOTIONSENSE_CMD_SENSOR_RANGE, and
1721 * MOTIONSENSE_CMD_KB_WAKE_ANGLE.
1722 */
1723 struct {
1724 /* Current value of the parameter queried. */
1725 int32_t ret;
1726 } ec_rate, sensor_odr, sensor_range, kb_wake_angle;
974e6f02
EBS
1727
1728 /* Used for MOTIONSENSE_CMD_SENSOR_OFFSET */
1729 struct {
1730 int16_t temp;
1731 int16_t offset[3];
1732 } sensor_offset, perform_calib;
5271db29
BR
1733 };
1734} __packed;
1735
deaf39ef
SG
1736/*****************************************************************************/
1737/* USB charging control commands */
1738
1739/* Set USB port charging mode */
1740#define EC_CMD_USB_CHARGE_SET_MODE 0x30
1741
1742struct ec_params_usb_charge_set_mode {
1743 uint8_t usb_port_id;
1744 uint8_t mode;
1745} __packed;
1746
1747/*****************************************************************************/
1748/* Persistent storage for host */
1749
1750/* Maximum bytes that can be read/written in a single command */
1751#define EC_PSTORE_SIZE_MAX 64
1752
1753/* Get persistent storage info */
1754#define EC_CMD_PSTORE_INFO 0x40
1755
1756struct ec_response_pstore_info {
1757 /* Persistent storage size, in bytes */
1758 uint32_t pstore_size;
1759 /* Access size; read/write offset and size must be a multiple of this */
1760 uint32_t access_size;
1761} __packed;
1762
1763/*
1764 * Read persistent storage
1765 *
1766 * Response is params.size bytes of data.
1767 */
1768#define EC_CMD_PSTORE_READ 0x41
1769
1770struct ec_params_pstore_read {
1771 uint32_t offset; /* Byte offset to read */
1772 uint32_t size; /* Size to read in bytes */
1773} __packed;
1774
1775/* Write persistent storage */
1776#define EC_CMD_PSTORE_WRITE 0x42
1777
1778struct ec_params_pstore_write {
1779 uint32_t offset; /* Byte offset to write */
1780 uint32_t size; /* Size to write in bytes */
1781 uint8_t data[EC_PSTORE_SIZE_MAX];
1782} __packed;
1783
1784/*****************************************************************************/
1785/* Real-time clock */
1786
1787/* RTC params and response structures */
1788struct ec_params_rtc {
1789 uint32_t time;
1790} __packed;
1791
1792struct ec_response_rtc {
1793 uint32_t time;
1794} __packed;
1795
1796/* These use ec_response_rtc */
1797#define EC_CMD_RTC_GET_VALUE 0x44
1798#define EC_CMD_RTC_GET_ALARM 0x45
1799
1800/* These all use ec_params_rtc */
1801#define EC_CMD_RTC_SET_VALUE 0x46
1802#define EC_CMD_RTC_SET_ALARM 0x47
1803
3eff6d2c
SB
1804/* Pass as param to SET_ALARM to clear the current alarm */
1805#define EC_RTC_ALARM_CLEAR 0
1806
deaf39ef
SG
1807/*****************************************************************************/
1808/* Port80 log access */
1809
256ab950
SB
1810/* Maximum entries that can be read/written in a single command */
1811#define EC_PORT80_SIZE_MAX 32
1812
deaf39ef
SG
1813/* Get last port80 code from previous boot */
1814#define EC_CMD_PORT80_LAST_BOOT 0x48
256ab950
SB
1815#define EC_CMD_PORT80_READ 0x48
1816
1817enum ec_port80_subcmd {
1818 EC_PORT80_GET_INFO = 0,
1819 EC_PORT80_READ_BUFFER,
1820};
1821
1822struct ec_params_port80_read {
1823 uint16_t subcmd;
1824 union {
1825 struct {
1826 uint32_t offset;
1827 uint32_t num_entries;
1828 } read_buffer;
1829 };
1830} __packed;
1831
1832struct ec_response_port80_read {
1833 union {
1834 struct {
1835 uint32_t writes;
1836 uint32_t history_size;
1837 uint32_t last_boot;
1838 } get_info;
1839 struct {
1840 uint16_t codes[EC_PORT80_SIZE_MAX];
1841 } data;
1842 };
1843} __packed;
deaf39ef
SG
1844
1845struct ec_response_port80_last_boot {
1846 uint16_t code;
1847} __packed;
1848
1849/*****************************************************************************/
5271db29
BR
1850/* Thermal engine commands. Note that there are two implementations. We'll
1851 * reuse the command number, but the data and behavior is incompatible.
1852 * Version 0 is what originally shipped on Link.
1853 * Version 1 separates the CPU thermal limits from the fan control.
1854 */
deaf39ef 1855
deaf39ef 1856#define EC_CMD_THERMAL_SET_THRESHOLD 0x50
5271db29
BR
1857#define EC_CMD_THERMAL_GET_THRESHOLD 0x51
1858
1859/* The version 0 structs are opaque. You have to know what they are for
1860 * the get/set commands to make any sense.
1861 */
deaf39ef 1862
5271db29 1863/* Version 0 - set */
deaf39ef
SG
1864struct ec_params_thermal_set_threshold {
1865 uint8_t sensor_type;
1866 uint8_t threshold_id;
1867 uint16_t value;
1868} __packed;
1869
5271db29 1870/* Version 0 - get */
deaf39ef
SG
1871struct ec_params_thermal_get_threshold {
1872 uint8_t sensor_type;
1873 uint8_t threshold_id;
1874} __packed;
1875
1876struct ec_response_thermal_get_threshold {
1877 uint16_t value;
1878} __packed;
1879
5271db29
BR
1880
1881/* The version 1 structs are visible. */
1882enum ec_temp_thresholds {
1883 EC_TEMP_THRESH_WARN = 0,
1884 EC_TEMP_THRESH_HIGH,
1885 EC_TEMP_THRESH_HALT,
1886
1887 EC_TEMP_THRESH_COUNT
1888};
1889
1890/* Thermal configuration for one temperature sensor. Temps are in degrees K.
1891 * Zero values will be silently ignored by the thermal task.
1892 */
1893struct ec_thermal_config {
1894 uint32_t temp_host[EC_TEMP_THRESH_COUNT]; /* levels of hotness */
1895 uint32_t temp_fan_off; /* no active cooling needed */
1896 uint32_t temp_fan_max; /* max active cooling needed */
1897} __packed;
1898
1899/* Version 1 - get config for one sensor. */
1900struct ec_params_thermal_get_threshold_v1 {
1901 uint32_t sensor_num;
1902} __packed;
1903/* This returns a struct ec_thermal_config */
1904
1905/* Version 1 - set config for one sensor.
1906 * Use read-modify-write for best results! */
1907struct ec_params_thermal_set_threshold_v1 {
1908 uint32_t sensor_num;
1909 struct ec_thermal_config cfg;
1910} __packed;
1911/* This returns no data */
1912
1913/****************************************************************************/
1914
deaf39ef
SG
1915/* Toggle automatic fan control */
1916#define EC_CMD_THERMAL_AUTO_FAN_CTRL 0x52
1917
1918/* Get TMP006 calibration data */
1919#define EC_CMD_TMP006_GET_CALIBRATION 0x53
1920
1921struct ec_params_tmp006_get_calibration {
1922 uint8_t index;
1923} __packed;
1924
1925struct ec_response_tmp006_get_calibration {
1926 float s0;
1927 float b0;
1928 float b1;
1929 float b2;
1930} __packed;
1931
1932/* Set TMP006 calibration data */
1933#define EC_CMD_TMP006_SET_CALIBRATION 0x54
1934
1935struct ec_params_tmp006_set_calibration {
1936 uint8_t index;
1937 uint8_t reserved[3]; /* Reserved; set 0 */
1938 float s0;
1939 float b0;
1940 float b1;
1941 float b2;
1942} __packed;
1943
5271db29
BR
1944/* Read raw TMP006 data */
1945#define EC_CMD_TMP006_GET_RAW 0x55
1946
1947struct ec_params_tmp006_get_raw {
1948 uint8_t index;
1949} __packed;
1950
1951struct ec_response_tmp006_get_raw {
1952 int32_t t; /* In 1/100 K */
1953 int32_t v; /* In nV */
1954};
1955
deaf39ef
SG
1956/*****************************************************************************/
1957/* MKBP - Matrix KeyBoard Protocol */
1958
1959/*
1960 * Read key state
1961 *
1962 * Returns raw data for keyboard cols; see ec_response_mkbp_info.cols for
1963 * expected response size.
b44c4d3f
DA
1964 *
1965 * NOTE: This has been superseded by EC_CMD_MKBP_GET_NEXT_EVENT. If you wish
1966 * to obtain the instantaneous state, use EC_CMD_MKBP_INFO with the type
1967 * EC_MKBP_INFO_CURRENT and event EC_MKBP_EVENT_KEY_MATRIX.
deaf39ef
SG
1968 */
1969#define EC_CMD_MKBP_STATE 0x60
1970
b44c4d3f
DA
1971/*
1972 * Provide information about various MKBP things. See enum ec_mkbp_info_type.
1973 */
deaf39ef
SG
1974#define EC_CMD_MKBP_INFO 0x61
1975
1976struct ec_response_mkbp_info {
1977 uint32_t rows;
1978 uint32_t cols;
b44c4d3f
DA
1979 /* Formerly "switches", which was 0. */
1980 uint8_t reserved;
deaf39ef
SG
1981} __packed;
1982
b44c4d3f
DA
1983struct ec_params_mkbp_info {
1984 uint8_t info_type;
1985 uint8_t event_type;
1986} __packed;
1987
1988enum ec_mkbp_info_type {
1989 /*
1990 * Info about the keyboard matrix: number of rows and columns.
1991 *
1992 * Returns struct ec_response_mkbp_info.
1993 */
1994 EC_MKBP_INFO_KBD = 0,
1995
1996 /*
1997 * For buttons and switches, info about which specifically are
1998 * supported. event_type must be set to one of the values in enum
1999 * ec_mkbp_event.
2000 *
2001 * For EC_MKBP_EVENT_BUTTON and EC_MKBP_EVENT_SWITCH, returns a 4 byte
2002 * bitmask indicating which buttons or switches are present. See the
2003 * bit inidices below.
2004 */
2005 EC_MKBP_INFO_SUPPORTED = 1,
2006
2007 /*
2008 * Instantaneous state of buttons and switches.
2009 *
2010 * event_type must be set to one of the values in enum ec_mkbp_event.
2011 *
2012 * For EC_MKBP_EVENT_KEY_MATRIX, returns uint8_t key_matrix[13]
2013 * indicating the current state of the keyboard matrix.
2014 *
2015 * For EC_MKBP_EVENT_HOST_EVENT, return uint32_t host_event, the raw
2016 * event state.
2017 *
2018 * For EC_MKBP_EVENT_BUTTON, returns uint32_t buttons, indicating the
2019 * state of supported buttons.
2020 *
2021 * For EC_MKBP_EVENT_SWITCH, returns uint32_t switches, indicating the
2022 * state of supported switches.
2023 */
2024 EC_MKBP_INFO_CURRENT = 2,
2025};
2026
deaf39ef
SG
2027/* Simulate key press */
2028#define EC_CMD_MKBP_SIMULATE_KEY 0x62
2029
2030struct ec_params_mkbp_simulate_key {
2031 uint8_t col;
2032 uint8_t row;
2033 uint8_t pressed;
2034} __packed;
2035
2036/* Configure keyboard scanning */
2037#define EC_CMD_MKBP_SET_CONFIG 0x64
2038#define EC_CMD_MKBP_GET_CONFIG 0x65
2039
2040/* flags */
2041enum mkbp_config_flags {
2042 EC_MKBP_FLAGS_ENABLE = 1, /* Enable keyboard scanning */
2043};
2044
2045enum mkbp_config_valid {
2046 EC_MKBP_VALID_SCAN_PERIOD = 1 << 0,
2047 EC_MKBP_VALID_POLL_TIMEOUT = 1 << 1,
2048 EC_MKBP_VALID_MIN_POST_SCAN_DELAY = 1 << 3,
2049 EC_MKBP_VALID_OUTPUT_SETTLE = 1 << 4,
2050 EC_MKBP_VALID_DEBOUNCE_DOWN = 1 << 5,
2051 EC_MKBP_VALID_DEBOUNCE_UP = 1 << 6,
2052 EC_MKBP_VALID_FIFO_MAX_DEPTH = 1 << 7,
2053};
2054
2055/* Configuration for our key scanning algorithm */
2056struct ec_mkbp_config {
2057 uint32_t valid_mask; /* valid fields */
2058 uint8_t flags; /* some flags (enum mkbp_config_flags) */
2059 uint8_t valid_flags; /* which flags are valid */
2060 uint16_t scan_period_us; /* period between start of scans */
2061 /* revert to interrupt mode after no activity for this long */
2062 uint32_t poll_timeout_us;
2063 /*
2064 * minimum post-scan relax time. Once we finish a scan we check
2065 * the time until we are due to start the next one. If this time is
2066 * shorter this field, we use this instead.
2067 */
2068 uint16_t min_post_scan_delay_us;
2069 /* delay between setting up output and waiting for it to settle */
2070 uint16_t output_settle_us;
2071 uint16_t debounce_down_us; /* time for debounce on key down */
2072 uint16_t debounce_up_us; /* time for debounce on key up */
2073 /* maximum depth to allow for fifo (0 = no keyscan output) */
2074 uint8_t fifo_max_depth;
2075} __packed;
2076
2077struct ec_params_mkbp_set_config {
2078 struct ec_mkbp_config config;
2079} __packed;
2080
2081struct ec_response_mkbp_get_config {
2082 struct ec_mkbp_config config;
2083} __packed;
2084
2085/* Run the key scan emulation */
2086#define EC_CMD_KEYSCAN_SEQ_CTRL 0x66
2087
2088enum ec_keyscan_seq_cmd {
2089 EC_KEYSCAN_SEQ_STATUS = 0, /* Get status information */
2090 EC_KEYSCAN_SEQ_CLEAR = 1, /* Clear sequence */
2091 EC_KEYSCAN_SEQ_ADD = 2, /* Add item to sequence */
2092 EC_KEYSCAN_SEQ_START = 3, /* Start running sequence */
2093 EC_KEYSCAN_SEQ_COLLECT = 4, /* Collect sequence summary data */
2094};
2095
2096enum ec_collect_flags {
2097 /*
2098 * Indicates this scan was processed by the EC. Due to timing, some
2099 * scans may be skipped.
2100 */
2101 EC_KEYSCAN_SEQ_FLAG_DONE = 1 << 0,
2102};
2103
2104struct ec_collect_item {
2105 uint8_t flags; /* some flags (enum ec_collect_flags) */
2106};
2107
2108struct ec_params_keyscan_seq_ctrl {
2109 uint8_t cmd; /* Command to send (enum ec_keyscan_seq_cmd) */
2110 union {
2111 struct {
2112 uint8_t active; /* still active */
2113 uint8_t num_items; /* number of items */
2114 /* Current item being presented */
2115 uint8_t cur_item;
2116 } status;
2117 struct {
2118 /*
2119 * Absolute time for this scan, measured from the
2120 * start of the sequence.
2121 */
2122 uint32_t time_us;
2123 uint8_t scan[0]; /* keyscan data */
2124 } add;
2125 struct {
2126 uint8_t start_item; /* First item to return */
2127 uint8_t num_items; /* Number of items to return */
2128 } collect;
2129 };
2130} __packed;
2131
2132struct ec_result_keyscan_seq_ctrl {
2133 union {
2134 struct {
2135 uint8_t num_items; /* Number of items */
2136 /* Data for each item */
2137 struct ec_collect_item item[0];
2138 } collect;
2139 };
2140} __packed;
2141
6f1d912b
VY
2142/*
2143 * Command for retrieving the next pending MKBP event from the EC device
2144 *
2145 * The device replies with UNAVAILABLE if there aren't any pending events.
2146 */
2147#define EC_CMD_GET_NEXT_EVENT 0x67
2148
2149enum ec_mkbp_event {
2150 /* Keyboard matrix changed. The event data is the new matrix state. */
2151 EC_MKBP_EVENT_KEY_MATRIX = 0,
2152
2153 /* New host event. The event data is 4 bytes of host event flags. */
2154 EC_MKBP_EVENT_HOST_EVENT = 1,
2155
2156 /* New Sensor FIFO data. The event data is fifo_info structure. */
2157 EC_MKBP_EVENT_SENSOR_FIFO = 2,
2158
b44c4d3f
DA
2159 /* The state of the non-matrixed buttons have changed. */
2160 EC_MKBP_EVENT_BUTTON = 3,
2161
2162 /* The state of the switches have changed. */
2163 EC_MKBP_EVENT_SWITCH = 4,
2164
e6eba3fa
RJ
2165 /* EC sent a sysrq command */
2166 EC_MKBP_EVENT_SYSRQ = 6,
2167
f47674e5
NA
2168 /* Notify the AP that something happened on CEC */
2169 EC_MKBP_EVENT_CEC_EVENT = 8,
2170
2171 /* Send an incoming CEC message to the AP */
2172 EC_MKBP_EVENT_CEC_MESSAGE = 9,
2173
6f1d912b
VY
2174 /* Number of MKBP events */
2175 EC_MKBP_EVENT_COUNT,
2176};
2177
2178union ec_response_get_next_data {
2179 uint8_t key_matrix[13];
2180
2181 /* Unaligned */
2182 uint32_t host_event;
b44c4d3f
DA
2183
2184 uint32_t buttons;
2185 uint32_t switches;
e6eba3fa 2186 uint32_t sysrq;
6f1d912b
VY
2187} __packed;
2188
57e94c8b
NA
2189union ec_response_get_next_data_v1 {
2190 uint8_t key_matrix[16];
2191 uint32_t host_event;
2192 uint32_t buttons;
2193 uint32_t switches;
2194 uint32_t sysrq;
2195 uint32_t cec_events;
2196 uint8_t cec_message[16];
2197} __packed;
2198
6f1d912b
VY
2199struct ec_response_get_next_event {
2200 uint8_t event_type;
2201 /* Followed by event data if any */
2202 union ec_response_get_next_data data;
2203} __packed;
2204
57e94c8b
NA
2205struct ec_response_get_next_event_v1 {
2206 uint8_t event_type;
2207 /* Followed by event data if any */
2208 union ec_response_get_next_data_v1 data;
2209} __packed;
2210
b44c4d3f
DA
2211/* Bit indices for buttons and switches.*/
2212/* Buttons */
2213#define EC_MKBP_POWER_BUTTON 0
2214#define EC_MKBP_VOL_UP 1
2215#define EC_MKBP_VOL_DOWN 2
2216
2217/* Switches */
2218#define EC_MKBP_LID_OPEN 0
6ccc3a33 2219#define EC_MKBP_TABLET_MODE 1
78d8f8f1 2220#define EC_MKBP_BASE_ATTACHED 2
b44c4d3f 2221
deaf39ef
SG
2222/*****************************************************************************/
2223/* Temperature sensor commands */
2224
2225/* Read temperature sensor info */
2226#define EC_CMD_TEMP_SENSOR_GET_INFO 0x70
2227
2228struct ec_params_temp_sensor_get_info {
2229 uint8_t id;
2230} __packed;
2231
2232struct ec_response_temp_sensor_get_info {
2233 char sensor_name[32];
2234 uint8_t sensor_type;
2235} __packed;
2236
2237/*****************************************************************************/
2238
2239/*
2240 * Note: host commands 0x80 - 0x87 are reserved to avoid conflict with ACPI
2241 * commands accidentally sent to the wrong interface. See the ACPI section
2242 * below.
2243 */
2244
2245/*****************************************************************************/
2246/* Host event commands */
2247
2248/*
2249 * Host event mask params and response structures, shared by all of the host
2250 * event commands below.
2251 */
2252struct ec_params_host_event_mask {
2253 uint32_t mask;
2254} __packed;
2255
2256struct ec_response_host_event_mask {
2257 uint32_t mask;
2258} __packed;
2259
2260/* These all use ec_response_host_event_mask */
2261#define EC_CMD_HOST_EVENT_GET_B 0x87
2262#define EC_CMD_HOST_EVENT_GET_SMI_MASK 0x88
2263#define EC_CMD_HOST_EVENT_GET_SCI_MASK 0x89
2264#define EC_CMD_HOST_EVENT_GET_WAKE_MASK 0x8d
2265
2266/* These all use ec_params_host_event_mask */
2267#define EC_CMD_HOST_EVENT_SET_SMI_MASK 0x8a
2268#define EC_CMD_HOST_EVENT_SET_SCI_MASK 0x8b
2269#define EC_CMD_HOST_EVENT_CLEAR 0x8c
2270#define EC_CMD_HOST_EVENT_SET_WAKE_MASK 0x8e
2271#define EC_CMD_HOST_EVENT_CLEAR_B 0x8f
2272
2273/*****************************************************************************/
2274/* Switch commands */
2275
2276/* Enable/disable LCD backlight */
2277#define EC_CMD_SWITCH_ENABLE_BKLIGHT 0x90
2278
2279struct ec_params_switch_enable_backlight {
2280 uint8_t enabled;
2281} __packed;
2282
2283/* Enable/disable WLAN/Bluetooth */
2284#define EC_CMD_SWITCH_ENABLE_WIRELESS 0x91
5271db29 2285#define EC_VER_SWITCH_ENABLE_WIRELESS 1
deaf39ef 2286
5271db29
BR
2287/* Version 0 params; no response */
2288struct ec_params_switch_enable_wireless_v0 {
deaf39ef
SG
2289 uint8_t enabled;
2290} __packed;
2291
5271db29
BR
2292/* Version 1 params */
2293struct ec_params_switch_enable_wireless_v1 {
2294 /* Flags to enable now */
2295 uint8_t now_flags;
2296
2297 /* Which flags to copy from now_flags */
2298 uint8_t now_mask;
2299
2300 /*
2301 * Flags to leave enabled in S3, if they're on at the S0->S3
2302 * transition. (Other flags will be disabled by the S0->S3
2303 * transition.)
2304 */
2305 uint8_t suspend_flags;
2306
2307 /* Which flags to copy from suspend_flags */
2308 uint8_t suspend_mask;
2309} __packed;
2310
2311/* Version 1 response */
2312struct ec_response_switch_enable_wireless_v1 {
2313 /* Flags to enable now */
2314 uint8_t now_flags;
2315
2316 /* Flags to leave enabled in S3 */
2317 uint8_t suspend_flags;
2318} __packed;
2319
deaf39ef
SG
2320/*****************************************************************************/
2321/* GPIO commands. Only available on EC if write protect has been disabled. */
2322
2323/* Set GPIO output value */
2324#define EC_CMD_GPIO_SET 0x92
2325
2326struct ec_params_gpio_set {
2327 char name[32];
2328 uint8_t val;
2329} __packed;
2330
2331/* Get GPIO value */
2332#define EC_CMD_GPIO_GET 0x93
2333
256ab950 2334/* Version 0 of input params and response */
deaf39ef
SG
2335struct ec_params_gpio_get {
2336 char name[32];
2337} __packed;
2338struct ec_response_gpio_get {
2339 uint8_t val;
2340} __packed;
2341
256ab950
SB
2342/* Version 1 of input params and response */
2343struct ec_params_gpio_get_v1 {
2344 uint8_t subcmd;
2345 union {
2346 struct {
2347 char name[32];
2348 } get_value_by_name;
2349 struct {
2350 uint8_t index;
2351 } get_info;
2352 };
2353} __packed;
2354
2355struct ec_response_gpio_get_v1 {
2356 union {
2357 struct {
2358 uint8_t val;
2359 } get_value_by_name, get_count;
2360 struct {
2361 uint8_t val;
2362 char name[32];
2363 uint32_t flags;
2364 } get_info;
2365 };
2366} __packed;
2367
2368enum gpio_get_subcmd {
2369 EC_GPIO_GET_BY_NAME = 0,
2370 EC_GPIO_GET_COUNT = 1,
2371 EC_GPIO_GET_INFO = 2,
2372};
2373
deaf39ef
SG
2374/*****************************************************************************/
2375/* I2C commands. Only available when flash write protect is unlocked. */
2376
5271db29
BR
2377/*
2378 * TODO(crosbug.com/p/23570): These commands are deprecated, and will be
2379 * removed soon. Use EC_CMD_I2C_XFER instead.
2380 */
2381
deaf39ef
SG
2382/* Read I2C bus */
2383#define EC_CMD_I2C_READ 0x94
2384
2385struct ec_params_i2c_read {
5271db29 2386 uint16_t addr; /* 8-bit address (7-bit shifted << 1) */
deaf39ef
SG
2387 uint8_t read_size; /* Either 8 or 16. */
2388 uint8_t port;
2389 uint8_t offset;
2390} __packed;
2391struct ec_response_i2c_read {
2392 uint16_t data;
2393} __packed;
2394
2395/* Write I2C bus */
2396#define EC_CMD_I2C_WRITE 0x95
2397
2398struct ec_params_i2c_write {
2399 uint16_t data;
5271db29 2400 uint16_t addr; /* 8-bit address (7-bit shifted << 1) */
deaf39ef
SG
2401 uint8_t write_size; /* Either 8 or 16. */
2402 uint8_t port;
2403 uint8_t offset;
2404} __packed;
2405
2406/*****************************************************************************/
2407/* Charge state commands. Only available when flash write protect unlocked. */
2408
5271db29
BR
2409/* Force charge state machine to stop charging the battery or force it to
2410 * discharge the battery.
2411 */
2412#define EC_CMD_CHARGE_CONTROL 0x96
2413#define EC_VER_CHARGE_CONTROL 1
deaf39ef 2414
5271db29
BR
2415enum ec_charge_control_mode {
2416 CHARGE_CONTROL_NORMAL = 0,
2417 CHARGE_CONTROL_IDLE,
2418 CHARGE_CONTROL_DISCHARGE,
2419};
2420
2421struct ec_params_charge_control {
2422 uint32_t mode; /* enum charge_control_mode */
deaf39ef
SG
2423} __packed;
2424
2425/*****************************************************************************/
2426/* Console commands. Only available when flash write protect is unlocked. */
2427
2428/* Snapshot console output buffer for use by EC_CMD_CONSOLE_READ. */
2429#define EC_CMD_CONSOLE_SNAPSHOT 0x97
2430
2431/*
0aa877c5
NB
2432 * Read data from the saved snapshot. If the subcmd parameter is
2433 * CONSOLE_READ_NEXT, this will return data starting from the beginning of
2434 * the latest snapshot. If it is CONSOLE_READ_RECENT, it will start from the
2435 * end of the previous snapshot.
2436 *
2437 * The params are only looked at in version >= 1 of this command. Prior
2438 * versions will just default to CONSOLE_READ_NEXT behavior.
deaf39ef
SG
2439 *
2440 * Response is null-terminated string. Empty string, if there is no more
2441 * remaining output.
2442 */
2443#define EC_CMD_CONSOLE_READ 0x98
2444
0aa877c5
NB
2445enum ec_console_read_subcmd {
2446 CONSOLE_READ_NEXT = 0,
2447 CONSOLE_READ_RECENT
2448};
2449
2450struct ec_params_console_read_v1 {
2451 uint8_t subcmd; /* enum ec_console_read_subcmd */
2452} __packed;
2453
deaf39ef
SG
2454/*****************************************************************************/
2455
2456/*
256ab950 2457 * Cut off battery power immediately or after the host has shut down.
deaf39ef 2458 *
256ab950
SB
2459 * return EC_RES_INVALID_COMMAND if unsupported by a board/battery.
2460 * EC_RES_SUCCESS if the command was successful.
2461 * EC_RES_ERROR if the cut off command failed.
deaf39ef 2462 */
256ab950 2463
deaf39ef
SG
2464#define EC_CMD_BATTERY_CUT_OFF 0x99
2465
256ab950
SB
2466#define EC_BATTERY_CUTOFF_FLAG_AT_SHUTDOWN (1 << 0)
2467
2468struct ec_params_battery_cutoff {
2469 uint8_t flags;
2470} __packed;
2471
deaf39ef 2472/*****************************************************************************/
5271db29 2473/* USB port mux control. */
deaf39ef
SG
2474
2475/*
5271db29
BR
2476 * Switch USB mux or return to automatic switching.
2477 */
2478#define EC_CMD_USB_MUX 0x9a
2479
2480struct ec_params_usb_mux {
2481 uint8_t mux;
2482} __packed;
2483
2484/*****************************************************************************/
2485/* LDOs / FETs control. */
2486
2487enum ec_ldo_state {
2488 EC_LDO_STATE_OFF = 0, /* the LDO / FET is shut down */
2489 EC_LDO_STATE_ON = 1, /* the LDO / FET is ON / providing power */
2490};
2491
2492/*
2493 * Switch on/off a LDO.
2494 */
2495#define EC_CMD_LDO_SET 0x9b
2496
2497struct ec_params_ldo_set {
2498 uint8_t index;
2499 uint8_t state;
2500} __packed;
2501
2502/*
2503 * Get LDO state.
2504 */
2505#define EC_CMD_LDO_GET 0x9c
2506
2507struct ec_params_ldo_get {
2508 uint8_t index;
2509} __packed;
2510
2511struct ec_response_ldo_get {
2512 uint8_t state;
2513} __packed;
2514
2515/*****************************************************************************/
2516/* Power info. */
2517
2518/*
2519 * Get power info.
2520 */
2521#define EC_CMD_POWER_INFO 0x9d
2522
2523struct ec_response_power_info {
2524 uint32_t usb_dev_type;
2525 uint16_t voltage_ac;
2526 uint16_t voltage_system;
2527 uint16_t current_system;
2528 uint16_t usb_current_limit;
2529} __packed;
2530
2531/*****************************************************************************/
2532/* I2C passthru command */
2533
2534#define EC_CMD_I2C_PASSTHRU 0x9e
2535
5271db29
BR
2536/* Read data; if not present, message is a write */
2537#define EC_I2C_FLAG_READ (1 << 15)
2538
2539/* Mask for address */
2540#define EC_I2C_ADDR_MASK 0x3ff
2541
2542#define EC_I2C_STATUS_NAK (1 << 0) /* Transfer was not acknowledged */
2543#define EC_I2C_STATUS_TIMEOUT (1 << 1) /* Timeout during transfer */
2544
2545/* Any error */
2546#define EC_I2C_STATUS_ERROR (EC_I2C_STATUS_NAK | EC_I2C_STATUS_TIMEOUT)
2547
2548struct ec_params_i2c_passthru_msg {
2549 uint16_t addr_flags; /* I2C slave address (7 or 10 bits) and flags */
2550 uint16_t len; /* Number of bytes to read or write */
2551} __packed;
2552
2553struct ec_params_i2c_passthru {
2554 uint8_t port; /* I2C port number */
2555 uint8_t num_msgs; /* Number of messages */
2556 struct ec_params_i2c_passthru_msg msg[];
2557 /* Data to write for all messages is concatenated here */
2558} __packed;
2559
2560struct ec_response_i2c_passthru {
2561 uint8_t i2c_status; /* Status flags (EC_I2C_STATUS_...) */
2562 uint8_t num_msgs; /* Number of messages processed */
2563 uint8_t data[]; /* Data read by messages concatenated here */
2564} __packed;
2565
2566/*****************************************************************************/
2567/* Power button hang detect */
2568
2569#define EC_CMD_HANG_DETECT 0x9f
2570
2571/* Reasons to start hang detection timer */
2572/* Power button pressed */
2573#define EC_HANG_START_ON_POWER_PRESS (1 << 0)
2574
2575/* Lid closed */
2576#define EC_HANG_START_ON_LID_CLOSE (1 << 1)
2577
2578 /* Lid opened */
2579#define EC_HANG_START_ON_LID_OPEN (1 << 2)
2580
2581/* Start of AP S3->S0 transition (booting or resuming from suspend) */
2582#define EC_HANG_START_ON_RESUME (1 << 3)
2583
2584/* Reasons to cancel hang detection */
2585
2586/* Power button released */
2587#define EC_HANG_STOP_ON_POWER_RELEASE (1 << 8)
2588
2589/* Any host command from AP received */
2590#define EC_HANG_STOP_ON_HOST_COMMAND (1 << 9)
2591
2592/* Stop on end of AP S0->S3 transition (suspending or shutting down) */
2593#define EC_HANG_STOP_ON_SUSPEND (1 << 10)
2594
2595/*
2596 * If this flag is set, all the other fields are ignored, and the hang detect
2597 * timer is started. This provides the AP a way to start the hang timer
2598 * without reconfiguring any of the other hang detect settings. Note that
2599 * you must previously have configured the timeouts.
2600 */
2601#define EC_HANG_START_NOW (1 << 30)
2602
2603/*
2604 * If this flag is set, all the other fields are ignored (including
2605 * EC_HANG_START_NOW). This provides the AP a way to stop the hang timer
2606 * without reconfiguring any of the other hang detect settings.
deaf39ef 2607 */
5271db29
BR
2608#define EC_HANG_STOP_NOW (1 << 31)
2609
2610struct ec_params_hang_detect {
2611 /* Flags; see EC_HANG_* */
2612 uint32_t flags;
2613
2614 /* Timeout in msec before generating host event, if enabled */
2615 uint16_t host_event_timeout_msec;
2616
2617 /* Timeout in msec before generating warm reboot, if enabled */
2618 uint16_t warm_reboot_timeout_msec;
2619} __packed;
2620
2621/*****************************************************************************/
2622/* Commands for battery charging */
2623
2624/*
2625 * This is the single catch-all host command to exchange data regarding the
2626 * charge state machine (v2 and up).
2627 */
2628#define EC_CMD_CHARGE_STATE 0xa0
2629
2630/* Subcommands for this host command */
2631enum charge_state_command {
2632 CHARGE_STATE_CMD_GET_STATE,
2633 CHARGE_STATE_CMD_GET_PARAM,
2634 CHARGE_STATE_CMD_SET_PARAM,
2635 CHARGE_STATE_NUM_CMDS
2636};
2637
2638/*
2639 * Known param numbers are defined here. Ranges are reserved for board-specific
2640 * params, which are handled by the particular implementations.
2641 */
2642enum charge_state_params {
2643 CS_PARAM_CHG_VOLTAGE, /* charger voltage limit */
2644 CS_PARAM_CHG_CURRENT, /* charger current limit */
2645 CS_PARAM_CHG_INPUT_CURRENT, /* charger input current limit */
2646 CS_PARAM_CHG_STATUS, /* charger-specific status */
2647 CS_PARAM_CHG_OPTION, /* charger-specific options */
2648 /* How many so far? */
2649 CS_NUM_BASE_PARAMS,
2650
2651 /* Range for CONFIG_CHARGER_PROFILE_OVERRIDE params */
2652 CS_PARAM_CUSTOM_PROFILE_MIN = 0x10000,
2653 CS_PARAM_CUSTOM_PROFILE_MAX = 0x1ffff,
2654
2655 /* Other custom param ranges go here... */
2656};
2657
2658struct ec_params_charge_state {
2659 uint8_t cmd; /* enum charge_state_command */
2660 union {
2661 struct {
2662 /* no args */
2663 } get_state;
2664
2665 struct {
2666 uint32_t param; /* enum charge_state_param */
2667 } get_param;
2668
2669 struct {
2670 uint32_t param; /* param to set */
2671 uint32_t value; /* value to set */
2672 } set_param;
2673 };
2674} __packed;
2675
2676struct ec_response_charge_state {
2677 union {
2678 struct {
2679 int ac;
2680 int chg_voltage;
2681 int chg_current;
2682 int chg_input_current;
2683 int batt_state_of_charge;
2684 } get_state;
2685
2686 struct {
2687 uint32_t value;
2688 } get_param;
2689 struct {
2690 /* no return values */
2691 } set_param;
2692 };
2693} __packed;
2694
deaf39ef
SG
2695
2696/*
2697 * Set maximum battery charging current.
2698 */
2699#define EC_CMD_CHARGE_CURRENT_LIMIT 0xa1
2700
2701struct ec_params_current_limit {
5271db29
BR
2702 uint32_t limit; /* in mA */
2703} __packed;
2704
2705/*
06635894 2706 * Set maximum external voltage / current.
5271db29 2707 */
06635894 2708#define EC_CMD_EXTERNAL_POWER_LIMIT 0x00A2
5271db29 2709
06635894
SN
2710/* Command v0 is used only on Spring and is obsolete + unsupported */
2711struct ec_params_external_power_limit_v1 {
2712 uint16_t current_lim; /* in mA, or EC_POWER_LIMIT_NONE to clear limit */
2713 uint16_t voltage_lim; /* in mV, or EC_POWER_LIMIT_NONE to clear limit */
5271db29
BR
2714} __packed;
2715
06635894
SN
2716#define EC_POWER_LIMIT_NONE 0xffff
2717
f00c06fd
SN
2718/* Inform the EC when entering a sleep state */
2719#define EC_CMD_HOST_SLEEP_EVENT 0xa9
2720
2721enum host_sleep_event {
2722 HOST_SLEEP_EVENT_S3_SUSPEND = 1,
2723 HOST_SLEEP_EVENT_S3_RESUME = 2,
2724 HOST_SLEEP_EVENT_S0IX_SUSPEND = 3,
2725 HOST_SLEEP_EVENT_S0IX_RESUME = 4
2726};
2727
2728struct ec_params_host_sleep_event {
2729 uint8_t sleep_event;
2730} __packed;
2731
5271db29
BR
2732/*****************************************************************************/
2733/* Smart battery pass-through */
2734
2735/* Get / Set 16-bit smart battery registers */
2736#define EC_CMD_SB_READ_WORD 0xb0
2737#define EC_CMD_SB_WRITE_WORD 0xb1
2738
2739/* Get / Set string smart battery parameters
2740 * formatted as SMBUS "block".
2741 */
2742#define EC_CMD_SB_READ_BLOCK 0xb2
2743#define EC_CMD_SB_WRITE_BLOCK 0xb3
2744
2745struct ec_params_sb_rd {
2746 uint8_t reg;
2747} __packed;
2748
2749struct ec_response_sb_rd_word {
2750 uint16_t value;
2751} __packed;
2752
2753struct ec_params_sb_wr_word {
2754 uint8_t reg;
2755 uint16_t value;
2756} __packed;
2757
2758struct ec_response_sb_rd_block {
2759 uint8_t data[32];
2760} __packed;
2761
2762struct ec_params_sb_wr_block {
2763 uint8_t reg;
2764 uint16_t data[32];
deaf39ef
SG
2765} __packed;
2766
256ab950
SB
2767/*****************************************************************************/
2768/* Battery vendor parameters
2769 *
2770 * Get or set vendor-specific parameters in the battery. Implementations may
2771 * differ between boards or batteries. On a set operation, the response
2772 * contains the actual value set, which may be rounded or clipped from the
2773 * requested value.
2774 */
2775
2776#define EC_CMD_BATTERY_VENDOR_PARAM 0xb4
2777
2778enum ec_battery_vendor_param_mode {
2779 BATTERY_VENDOR_PARAM_MODE_GET = 0,
2780 BATTERY_VENDOR_PARAM_MODE_SET,
2781};
2782
2783struct ec_params_battery_vendor_param {
2784 uint32_t param;
2785 uint32_t value;
2786 uint8_t mode;
2787} __packed;
2788
2789struct ec_response_battery_vendor_param {
2790 uint32_t value;
2791} __packed;
2792
c1f3375b
CYC
2793/*****************************************************************************/
2794/* Commands for I2S recording on audio codec. */
2795
2796#define EC_CMD_CODEC_I2S 0x00BC
2797
2798enum ec_codec_i2s_subcmd {
2799 EC_CODEC_SET_SAMPLE_DEPTH = 0x0,
2800 EC_CODEC_SET_GAIN = 0x1,
2801 EC_CODEC_GET_GAIN = 0x2,
2802 EC_CODEC_I2S_ENABLE = 0x3,
2803 EC_CODEC_I2S_SET_CONFIG = 0x4,
2804 EC_CODEC_I2S_SET_TDM_CONFIG = 0x5,
2805 EC_CODEC_I2S_SET_BCLK = 0x6,
2806};
2807
2808enum ec_sample_depth_value {
2809 EC_CODEC_SAMPLE_DEPTH_16 = 0,
2810 EC_CODEC_SAMPLE_DEPTH_24 = 1,
2811};
2812
2813enum ec_i2s_config {
2814 EC_DAI_FMT_I2S = 0,
2815 EC_DAI_FMT_RIGHT_J = 1,
2816 EC_DAI_FMT_LEFT_J = 2,
2817 EC_DAI_FMT_PCM_A = 3,
2818 EC_DAI_FMT_PCM_B = 4,
2819 EC_DAI_FMT_PCM_TDM = 5,
2820};
2821
2822struct ec_param_codec_i2s {
2823 /*
2824 * enum ec_codec_i2s_subcmd
2825 */
2826 uint8_t cmd;
2827 union {
2828 /*
2829 * EC_CODEC_SET_SAMPLE_DEPTH
2830 * Value should be one of ec_sample_depth_value.
2831 */
2832 uint8_t depth;
2833
2834 /*
2835 * EC_CODEC_SET_GAIN
2836 * Value should be 0~43 for both channels.
2837 */
2838 struct ec_param_codec_i2s_set_gain {
2839 uint8_t left;
2840 uint8_t right;
2841 } __packed gain;
2842
2843 /*
2844 * EC_CODEC_I2S_ENABLE
2845 * 1 to enable, 0 to disable.
2846 */
2847 uint8_t i2s_enable;
2848
2849 /*
2850 * EC_CODEC_I2S_SET_COFNIG
2851 * Value should be one of ec_i2s_config.
2852 */
2853 uint8_t i2s_config;
2854
2855 /*
2856 * EC_CODEC_I2S_SET_TDM_CONFIG
2857 * Value should be one of ec_i2s_config.
2858 */
2859 struct ec_param_codec_i2s_tdm {
2860 /*
2861 * 0 to 496
2862 */
2863 int16_t ch0_delay;
2864 /*
2865 * -1 to 496
2866 */
2867 int16_t ch1_delay;
2868 uint8_t adjacent_to_ch0;
2869 uint8_t adjacent_to_ch1;
2870 } __packed tdm_param;
2871
2872 /*
2873 * EC_CODEC_I2S_SET_BCLK
2874 */
2875 uint32_t bclk;
2876 };
2877} __packed;
2878
2879/*
2880 * For subcommand EC_CODEC_GET_GAIN.
2881 */
2882struct ec_response_codec_gain {
2883 uint8_t left;
2884 uint8_t right;
2885} __packed;
2886
deaf39ef
SG
2887/*****************************************************************************/
2888/* System commands */
2889
2890/*
5271db29
BR
2891 * TODO(crosbug.com/p/23747): This is a confusing name, since it doesn't
2892 * necessarily reboot the EC. Rename to "image" or something similar?
deaf39ef
SG
2893 */
2894#define EC_CMD_REBOOT_EC 0xd2
2895
2896/* Command */
2897enum ec_reboot_cmd {
2898 EC_REBOOT_CANCEL = 0, /* Cancel a pending reboot */
2899 EC_REBOOT_JUMP_RO = 1, /* Jump to RO without rebooting */
2900 EC_REBOOT_JUMP_RW = 2, /* Jump to RW without rebooting */
2901 /* (command 3 was jump to RW-B) */
2902 EC_REBOOT_COLD = 4, /* Cold-reboot */
2903 EC_REBOOT_DISABLE_JUMP = 5, /* Disable jump until next reboot */
2904 EC_REBOOT_HIBERNATE = 6 /* Hibernate EC */
2905};
2906
2907/* Flags for ec_params_reboot_ec.reboot_flags */
2908#define EC_REBOOT_FLAG_RESERVED0 (1 << 0) /* Was recovery request */
2909#define EC_REBOOT_FLAG_ON_AP_SHUTDOWN (1 << 1) /* Reboot after AP shutdown */
2910
2911struct ec_params_reboot_ec {
2912 uint8_t cmd; /* enum ec_reboot_cmd */
2913 uint8_t flags; /* See EC_REBOOT_FLAG_* */
2914} __packed;
2915
2916/*
2917 * Get information on last EC panic.
2918 *
2919 * Returns variable-length platform-dependent panic information. See panic.h
2920 * for details.
2921 */
2922#define EC_CMD_GET_PANIC_INFO 0xd3
2923
2924/*****************************************************************************/
2925/*
2926 * ACPI commands
2927 *
2928 * These are valid ONLY on the ACPI command/data port.
2929 */
2930
2931/*
2932 * ACPI Read Embedded Controller
2933 *
2934 * This reads from ACPI memory space on the EC (EC_ACPI_MEM_*).
2935 *
2936 * Use the following sequence:
2937 *
2938 * - Write EC_CMD_ACPI_READ to EC_LPC_ADDR_ACPI_CMD
2939 * - Wait for EC_LPC_CMDR_PENDING bit to clear
2940 * - Write address to EC_LPC_ADDR_ACPI_DATA
2941 * - Wait for EC_LPC_CMDR_DATA bit to set
2942 * - Read value from EC_LPC_ADDR_ACPI_DATA
2943 */
2944#define EC_CMD_ACPI_READ 0x80
2945
2946/*
2947 * ACPI Write Embedded Controller
2948 *
2949 * This reads from ACPI memory space on the EC (EC_ACPI_MEM_*).
2950 *
2951 * Use the following sequence:
2952 *
2953 * - Write EC_CMD_ACPI_WRITE to EC_LPC_ADDR_ACPI_CMD
2954 * - Wait for EC_LPC_CMDR_PENDING bit to clear
2955 * - Write address to EC_LPC_ADDR_ACPI_DATA
2956 * - Wait for EC_LPC_CMDR_PENDING bit to clear
2957 * - Write value to EC_LPC_ADDR_ACPI_DATA
2958 */
2959#define EC_CMD_ACPI_WRITE 0x81
2960
2961/*
2962 * ACPI Query Embedded Controller
2963 *
2964 * This clears the lowest-order bit in the currently pending host events, and
2965 * sets the result code to the 1-based index of the bit (event 0x00000001 = 1,
2966 * event 0x80000000 = 32), or 0 if no event was pending.
2967 */
2968#define EC_CMD_ACPI_QUERY_EVENT 0x84
2969
2970/* Valid addresses in ACPI memory space, for read/write commands */
5271db29 2971
deaf39ef
SG
2972/* Memory space version; set to EC_ACPI_MEM_VERSION_CURRENT */
2973#define EC_ACPI_MEM_VERSION 0x00
2974/*
2975 * Test location; writing value here updates test compliment byte to (0xff -
2976 * value).
2977 */
2978#define EC_ACPI_MEM_TEST 0x01
2979/* Test compliment; writes here are ignored. */
2980#define EC_ACPI_MEM_TEST_COMPLIMENT 0x02
5271db29 2981
deaf39ef
SG
2982/* Keyboard backlight brightness percent (0 - 100) */
2983#define EC_ACPI_MEM_KEYBOARD_BACKLIGHT 0x03
5271db29
BR
2984/* DPTF Target Fan Duty (0-100, 0xff for auto/none) */
2985#define EC_ACPI_MEM_FAN_DUTY 0x04
2986
2987/*
2988 * DPTF temp thresholds. Any of the EC's temp sensors can have up to two
2989 * independent thresholds attached to them. The current value of the ID
2990 * register determines which sensor is affected by the THRESHOLD and COMMIT
2991 * registers. The THRESHOLD register uses the same EC_TEMP_SENSOR_OFFSET scheme
2992 * as the memory-mapped sensors. The COMMIT register applies those settings.
2993 *
2994 * The spec does not mandate any way to read back the threshold settings
2995 * themselves, but when a threshold is crossed the AP needs a way to determine
2996 * which sensor(s) are responsible. Each reading of the ID register clears and
2997 * returns one sensor ID that has crossed one of its threshold (in either
2998 * direction) since the last read. A value of 0xFF means "no new thresholds
2999 * have tripped". Setting or enabling the thresholds for a sensor will clear
3000 * the unread event count for that sensor.
3001 */
3002#define EC_ACPI_MEM_TEMP_ID 0x05
3003#define EC_ACPI_MEM_TEMP_THRESHOLD 0x06
3004#define EC_ACPI_MEM_TEMP_COMMIT 0x07
3005/*
3006 * Here are the bits for the COMMIT register:
3007 * bit 0 selects the threshold index for the chosen sensor (0/1)
3008 * bit 1 enables/disables the selected threshold (0 = off, 1 = on)
3009 * Each write to the commit register affects one threshold.
3010 */
3011#define EC_ACPI_MEM_TEMP_COMMIT_SELECT_MASK (1 << 0)
3012#define EC_ACPI_MEM_TEMP_COMMIT_ENABLE_MASK (1 << 1)
3013/*
3014 * Example:
3015 *
3016 * Set the thresholds for sensor 2 to 50 C and 60 C:
3017 * write 2 to [0x05] -- select temp sensor 2
3018 * write 0x7b to [0x06] -- C_TO_K(50) - EC_TEMP_SENSOR_OFFSET
3019 * write 0x2 to [0x07] -- enable threshold 0 with this value
3020 * write 0x85 to [0x06] -- C_TO_K(60) - EC_TEMP_SENSOR_OFFSET
3021 * write 0x3 to [0x07] -- enable threshold 1 with this value
3022 *
3023 * Disable the 60 C threshold, leaving the 50 C threshold unchanged:
3024 * write 2 to [0x05] -- select temp sensor 2
3025 * write 0x1 to [0x07] -- disable threshold 1
3026 */
3027
3028/* DPTF battery charging current limit */
3029#define EC_ACPI_MEM_CHARGING_LIMIT 0x08
3030
3031/* Charging limit is specified in 64 mA steps */
3032#define EC_ACPI_MEM_CHARGING_LIMIT_STEP_MA 64
3033/* Value to disable DPTF battery charging limit */
3034#define EC_ACPI_MEM_CHARGING_LIMIT_DISABLED 0xff
deaf39ef
SG
3035
3036/* Current version of ACPI memory address space */
3037#define EC_ACPI_MEM_VERSION_CURRENT 1
3038
3039
f47674e5
NA
3040/*****************************************************************************/
3041/*
3042 * HDMI CEC commands
3043 *
3044 * These commands are for sending and receiving message via HDMI CEC
3045 */
3046#define EC_MAX_CEC_MSG_LEN 16
3047
3048/* CEC message from the AP to be written on the CEC bus */
3049#define EC_CMD_CEC_WRITE_MSG 0x00B8
3050
3051/**
3052 * struct ec_params_cec_write - Message to write to the CEC bus
3053 * @msg: message content to write to the CEC bus
3054 */
3055struct ec_params_cec_write {
3056 uint8_t msg[EC_MAX_CEC_MSG_LEN];
3057} __packed;
3058
3059/* Set various CEC parameters */
3060#define EC_CMD_CEC_SET 0x00BA
3061
3062/**
3063 * struct ec_params_cec_set - CEC parameters set
3064 * @cmd: parameter type, can be CEC_CMD_ENABLE or CEC_CMD_LOGICAL_ADDRESS
3065 * @val: in case cmd is CEC_CMD_ENABLE, this field can be 0 to disable CEC
3066 * or 1 to enable CEC functionality, in case cmd is CEC_CMD_LOGICAL_ADDRESS,
3067 * this field encodes the requested logical address between 0 and 15
3068 * or 0xff to unregister
3069 */
3070struct ec_params_cec_set {
3071 uint8_t cmd; /* enum cec_command */
3072 uint8_t val;
3073} __packed;
3074
3075/* Read various CEC parameters */
3076#define EC_CMD_CEC_GET 0x00BB
3077
3078/**
3079 * struct ec_params_cec_get - CEC parameters get
3080 * @cmd: parameter type, can be CEC_CMD_ENABLE or CEC_CMD_LOGICAL_ADDRESS
3081 */
3082struct ec_params_cec_get {
3083 uint8_t cmd; /* enum cec_command */
3084} __packed;
3085
3086/**
3087 * struct ec_response_cec_get - CEC parameters get response
3088 * @val: in case cmd was CEC_CMD_ENABLE, this field will 0 if CEC is
3089 * disabled or 1 if CEC functionality is enabled,
3090 * in case cmd was CEC_CMD_LOGICAL_ADDRESS, this will encode the
3091 * configured logical address between 0 and 15 or 0xff if unregistered
3092 */
3093struct ec_response_cec_get {
3094 uint8_t val;
3095} __packed;
3096
3097/* CEC parameters command */
3098enum ec_cec_command {
3099 /* CEC reading, writing and events enable */
3100 CEC_CMD_ENABLE,
3101 /* CEC logical address */
3102 CEC_CMD_LOGICAL_ADDRESS,
3103};
3104
3105/* Events from CEC to AP */
3106enum mkbp_cec_event {
3107 /* Outgoing message was acknowledged by a follower */
3108 EC_MKBP_CEC_SEND_OK = BIT(0),
3109 /* Outgoing message was not acknowledged */
3110 EC_MKBP_CEC_SEND_FAILED = BIT(1),
3111};
3112
deaf39ef
SG
3113/*****************************************************************************/
3114/*
3115 * Special commands
3116 *
3117 * These do not follow the normal rules for commands. See each command for
3118 * details.
3119 */
3120
3121/*
3122 * Reboot NOW
3123 *
3124 * This command will work even when the EC LPC interface is busy, because the
3125 * reboot command is processed at interrupt level. Note that when the EC
3126 * reboots, the host will reboot too, so there is no response to this command.
3127 *
3128 * Use EC_CMD_REBOOT_EC to reboot the EC more politely.
3129 */
3130#define EC_CMD_REBOOT 0xd1 /* Think "die" */
3131
3132/*
3133 * Resend last response (not supported on LPC).
3134 *
3135 * Returns EC_RES_UNAVAILABLE if there is no response available - for example,
3136 * there was no previous command, or the previous command's response was too
3137 * big to save.
3138 */
3139#define EC_CMD_RESEND_RESPONSE 0xdb
3140
3141/*
3142 * This header byte on a command indicate version 0. Any header byte less
3143 * than this means that we are talking to an old EC which doesn't support
3144 * versioning. In that case, we assume version 0.
3145 *
3146 * Header bytes greater than this indicate a later version. For example,
3147 * EC_CMD_VERSION0 + 1 means we are using version 1.
3148 *
5271db29 3149 * The old EC interface must not use commands 0xdc or higher.
deaf39ef
SG
3150 */
3151#define EC_CMD_VERSION0 0xdc
3152
3153#endif /* !__ACPI__ */
3154
256ab950
SB
3155/*****************************************************************************/
3156/*
3157 * PD commands
3158 *
3159 * These commands are for PD MCU communication.
3160 */
3161
3162/* EC to PD MCU exchange status command */
3163#define EC_CMD_PD_EXCHANGE_STATUS 0x100
3164
3165/* Status of EC being sent to PD */
3166struct ec_params_pd_status {
3167 int8_t batt_soc; /* battery state of charge */
3168} __packed;
3169
3170/* Status of PD being sent back to EC */
3171struct ec_response_pd_status {
3172 int8_t status; /* PD MCU status */
3173 uint32_t curr_lim_ma; /* input current limit */
3174} __packed;
3175
3176/* Set USB type-C port role and muxes */
3177#define EC_CMD_USB_PD_CONTROL 0x101
3178
3179enum usb_pd_control_role {
3180 USB_PD_CTRL_ROLE_NO_CHANGE = 0,
3181 USB_PD_CTRL_ROLE_TOGGLE_ON = 1, /* == AUTO */
3182 USB_PD_CTRL_ROLE_TOGGLE_OFF = 2,
3183 USB_PD_CTRL_ROLE_FORCE_SINK = 3,
3184 USB_PD_CTRL_ROLE_FORCE_SOURCE = 4,
3185};
3186
3187enum usb_pd_control_mux {
3188 USB_PD_CTRL_MUX_NO_CHANGE = 0,
3189 USB_PD_CTRL_MUX_NONE = 1,
3190 USB_PD_CTRL_MUX_USB = 2,
3191 USB_PD_CTRL_MUX_DP = 3,
3192 USB_PD_CTRL_MUX_DOCK = 4,
3193 USB_PD_CTRL_MUX_AUTO = 5,
3194};
3195
c7eb47f9
BL
3196enum usb_pd_control_swap {
3197 USB_PD_CTRL_SWAP_NONE = 0,
3198 USB_PD_CTRL_SWAP_DATA = 1,
3199 USB_PD_CTRL_SWAP_POWER = 2,
3200 USB_PD_CTRL_SWAP_VCONN = 3,
3201 USB_PD_CTRL_SWAP_COUNT
3202};
3203
256ab950
SB
3204struct ec_params_usb_pd_control {
3205 uint8_t port;
3206 uint8_t role;
3207 uint8_t mux;
c7eb47f9 3208 uint8_t swap;
256ab950
SB
3209} __packed;
3210
c6983166
BL
3211#define PD_CTRL_RESP_ENABLED_COMMS (1 << 0) /* Communication enabled */
3212#define PD_CTRL_RESP_ENABLED_CONNECTED (1 << 1) /* Device connected */
3213#define PD_CTRL_RESP_ENABLED_PD_CAPABLE (1 << 2) /* Partner is PD capable */
3214
c7eb47f9
BL
3215#define PD_CTRL_RESP_ROLE_POWER BIT(0) /* 0=SNK/1=SRC */
3216#define PD_CTRL_RESP_ROLE_DATA BIT(1) /* 0=UFP/1=DFP */
3217#define PD_CTRL_RESP_ROLE_VCONN BIT(2) /* Vconn status */
3218#define PD_CTRL_RESP_ROLE_DR_POWER BIT(3) /* Partner is dualrole power */
3219#define PD_CTRL_RESP_ROLE_DR_DATA BIT(4) /* Partner is dualrole data */
3220#define PD_CTRL_RESP_ROLE_USB_COMM BIT(5) /* Partner USB comm capable */
3221#define PD_CTRL_RESP_ROLE_EXT_POWERED BIT(6) /* Partner externally powerd */
3222
c6983166
BL
3223struct ec_response_usb_pd_control_v1 {
3224 uint8_t enabled;
3225 uint8_t role;
3226 uint8_t polarity;
3227 char state[32];
3228} __packed;
3229
3230#define EC_CMD_USB_PD_PORTS 0x102
3231
b082b2e1
SN
3232/* Maximum number of PD ports on a device, num_ports will be <= this */
3233#define EC_USB_PD_MAX_PORTS 8
3234
c6983166
BL
3235struct ec_response_usb_pd_ports {
3236 uint8_t num_ports;
3237} __packed;
3238
3239#define EC_CMD_USB_PD_POWER_INFO 0x103
3240
3241#define PD_POWER_CHARGING_PORT 0xff
3242struct ec_params_usb_pd_power_info {
3243 uint8_t port;
3244} __packed;
3245
3246enum usb_chg_type {
3247 USB_CHG_TYPE_NONE,
3248 USB_CHG_TYPE_PD,
3249 USB_CHG_TYPE_C,
3250 USB_CHG_TYPE_PROPRIETARY,
3251 USB_CHG_TYPE_BC12_DCP,
3252 USB_CHG_TYPE_BC12_CDP,
3253 USB_CHG_TYPE_BC12_SDP,
3254 USB_CHG_TYPE_OTHER,
3255 USB_CHG_TYPE_VBUS,
3256 USB_CHG_TYPE_UNKNOWN,
3257};
06635894
SN
3258enum usb_power_roles {
3259 USB_PD_PORT_POWER_DISCONNECTED,
3260 USB_PD_PORT_POWER_SOURCE,
3261 USB_PD_PORT_POWER_SINK,
3262 USB_PD_PORT_POWER_SINK_NOT_CHARGING,
3263};
c6983166
BL
3264
3265struct usb_chg_measures {
3266 uint16_t voltage_max;
3267 uint16_t voltage_now;
3268 uint16_t current_max;
3269 uint16_t current_lim;
3270} __packed;
3271
3272struct ec_response_usb_pd_power_info {
3273 uint8_t role;
3274 uint8_t type;
3275 uint8_t dualrole;
3276 uint8_t reserved1;
3277 struct usb_chg_measures meas;
3278 uint32_t max_power;
3279} __packed;
3280
06635894
SN
3281struct ec_params_usb_pd_info_request {
3282 uint8_t port;
3283} __packed;
3284
36f47383
FP
3285/*
3286 * This command will return the number of USB PD charge port + the number
3287 * of dedicated port present.
3288 * EC_CMD_USB_PD_PORTS does NOT include the dedicated ports
3289 */
3290#define EC_CMD_CHARGE_PORT_COUNT 0x0105
3291struct ec_response_charge_port_count {
3292 uint8_t port_count;
3293} __packed;
3294
06635894
SN
3295/* Read USB-PD Device discovery info */
3296#define EC_CMD_USB_PD_DISCOVERY 0x0113
3297struct ec_params_usb_pd_discovery_entry {
3298 uint16_t vid; /* USB-IF VID */
3299 uint16_t pid; /* USB-IF PID */
3300 uint8_t ptype; /* product type (hub,periph,cable,ama) */
3301} __packed;
3302
3303/* Override default charge behavior */
3304#define EC_CMD_PD_CHARGE_PORT_OVERRIDE 0x0114
3305
3306/* Negative port parameters have special meaning */
3307enum usb_pd_override_ports {
3308 OVERRIDE_DONT_CHARGE = -2,
3309 OVERRIDE_OFF = -1,
3310 /* [0, CONFIG_USB_PD_PORT_COUNT): Port# */
3311};
3312
3313struct ec_params_charge_port_override {
3314 int16_t override_port; /* Override port# */
3315} __packed;
3316
3317/* Read (and delete) one entry of PD event log */
3318#define EC_CMD_PD_GET_LOG_ENTRY 0x0115
3319
3320struct ec_response_pd_log {
3321 uint32_t timestamp; /* relative timestamp in milliseconds */
3322 uint8_t type; /* event type : see PD_EVENT_xx below */
3323 uint8_t size_port; /* [7:5] port number [4:0] payload size in bytes */
3324 uint16_t data; /* type-defined data payload */
3325 uint8_t payload[0]; /* optional additional data payload: 0..16 bytes */
3326} __packed;
3327
3328/* The timestamp is the microsecond counter shifted to get about a ms. */
3329#define PD_LOG_TIMESTAMP_SHIFT 10 /* 1 LSB = 1024us */
3330
3331#define PD_LOG_SIZE_MASK 0x1f
3332#define PD_LOG_PORT_MASK 0xe0
3333#define PD_LOG_PORT_SHIFT 5
3334#define PD_LOG_PORT_SIZE(port, size) (((port) << PD_LOG_PORT_SHIFT) | \
3335 ((size) & PD_LOG_SIZE_MASK))
3336#define PD_LOG_PORT(size_port) ((size_port) >> PD_LOG_PORT_SHIFT)
3337#define PD_LOG_SIZE(size_port) ((size_port) & PD_LOG_SIZE_MASK)
3338
3339/* PD event log : entry types */
3340/* PD MCU events */
3341#define PD_EVENT_MCU_BASE 0x00
3342#define PD_EVENT_MCU_CHARGE (PD_EVENT_MCU_BASE+0)
3343#define PD_EVENT_MCU_CONNECT (PD_EVENT_MCU_BASE+1)
3344/* Reserved for custom board event */
3345#define PD_EVENT_MCU_BOARD_CUSTOM (PD_EVENT_MCU_BASE+2)
3346/* PD generic accessory events */
3347#define PD_EVENT_ACC_BASE 0x20
3348#define PD_EVENT_ACC_RW_FAIL (PD_EVENT_ACC_BASE+0)
3349#define PD_EVENT_ACC_RW_ERASE (PD_EVENT_ACC_BASE+1)
3350/* PD power supply events */
3351#define PD_EVENT_PS_BASE 0x40
3352#define PD_EVENT_PS_FAULT (PD_EVENT_PS_BASE+0)
3353/* PD video dongles events */
3354#define PD_EVENT_VIDEO_BASE 0x60
3355#define PD_EVENT_VIDEO_DP_MODE (PD_EVENT_VIDEO_BASE+0)
3356#define PD_EVENT_VIDEO_CODEC (PD_EVENT_VIDEO_BASE+1)
3357/* Returned in the "type" field, when there is no entry available */
3358#define PD_EVENT_NO_ENTRY 0xff
3359
3360/*
3361 * PD_EVENT_MCU_CHARGE event definition :
3362 * the payload is "struct usb_chg_measures"
3363 * the data field contains the port state flags as defined below :
3364 */
3365/* Port partner is a dual role device */
3366#define CHARGE_FLAGS_DUAL_ROLE BIT(15)
3367/* Port is the pending override port */
3368#define CHARGE_FLAGS_DELAYED_OVERRIDE BIT(14)
3369/* Port is the override port */
3370#define CHARGE_FLAGS_OVERRIDE BIT(13)
3371/* Charger type */
3372#define CHARGE_FLAGS_TYPE_SHIFT 3
3373#define CHARGE_FLAGS_TYPE_MASK (0xf << CHARGE_FLAGS_TYPE_SHIFT)
3374/* Power delivery role */
3375#define CHARGE_FLAGS_ROLE_MASK (7 << 0)
3376
3377/*
3378 * PD_EVENT_PS_FAULT data field flags definition :
3379 */
3380#define PS_FAULT_OCP 1
3381#define PS_FAULT_FAST_OCP 2
3382#define PS_FAULT_OVP 3
3383#define PS_FAULT_DISCH 4
3384
3385/*
3386 * PD_EVENT_VIDEO_CODEC payload is "struct mcdp_info".
3387 */
3388struct mcdp_version {
3389 uint8_t major;
3390 uint8_t minor;
3391 uint16_t build;
3392} __packed;
3393
3394struct mcdp_info {
3395 uint8_t family[2];
3396 uint8_t chipid[2];
3397 struct mcdp_version irom;
3398 struct mcdp_version fw;
3399} __packed;
3400
3401/* struct mcdp_info field decoding */
3402#define MCDP_CHIPID(chipid) ((chipid[0] << 8) | chipid[1])
3403#define MCDP_FAMILY(family) ((family[0] << 8) | family[1])
3404
c6983166
BL
3405/* Get info about USB-C SS muxes */
3406#define EC_CMD_USB_PD_MUX_INFO 0x11a
3407
3408struct ec_params_usb_pd_mux_info {
3409 uint8_t port; /* USB-C port number */
3410} __packed;
3411
3412/* Flags representing mux state */
3413#define USB_PD_MUX_USB_ENABLED (1 << 0)
3414#define USB_PD_MUX_DP_ENABLED (1 << 1)
3415#define USB_PD_MUX_POLARITY_INVERTED (1 << 2)
3416#define USB_PD_MUX_HPD_IRQ (1 << 3)
3417
3418struct ec_response_usb_pd_mux_info {
3419 uint8_t flags; /* USB_PD_MUX_*-encoded USB mux state */
3420} __packed;
3421
256ab950
SB
3422/*****************************************************************************/
3423/*
3424 * Passthru commands
3425 *
3426 * Some platforms have sub-processors chained to each other. For example.
3427 *
3428 * AP <--> EC <--> PD MCU
3429 *
3430 * The top 2 bits of the command number are used to indicate which device the
3431 * command is intended for. Device 0 is always the device receiving the
3432 * command; other device mapping is board-specific.
3433 *
3434 * When a device receives a command to be passed to a sub-processor, it passes
3435 * it on with the device number set back to 0. This allows the sub-processor
3436 * to remain blissfully unaware of whether the command originated on the next
3437 * device up the chain, or was passed through from the AP.
3438 *
3439 * In the above example, if the AP wants to send command 0x0002 to the PD MCU,
3440 * AP sends command 0x4002 to the EC
3441 * EC sends command 0x0002 to the PD MCU
3442 * EC forwards PD MCU response back to the AP
3443 */
3444
3445/* Offset and max command number for sub-device n */
3446#define EC_CMD_PASSTHRU_OFFSET(n) (0x4000 * (n))
3447#define EC_CMD_PASSTHRU_MAX(n) (EC_CMD_PASSTHRU_OFFSET(n) + 0x3fff)
3448
5271db29
BR
3449/*****************************************************************************/
3450/*
3451 * Deprecated constants. These constants have been renamed for clarity. The
3452 * meaning and size has not changed. Programs that use the old names should
3453 * switch to the new names soon, as the old names may not be carried forward
3454 * forever.
3455 */
3456#define EC_HOST_PARAM_SIZE EC_PROTO2_MAX_PARAM_SIZE
3457#define EC_LPC_ADDR_OLD_PARAM EC_HOST_CMD_REGION1
3458#define EC_OLD_PARAM_SIZE EC_HOST_CMD_REGION_SIZE
3459
deaf39ef 3460#endif /* __CROS_EC_COMMANDS_H */