]>
Commit | Line | Data |
---|---|---|
00db8189 | 1 | /* |
00db8189 AF |
2 | * Framework and drivers for configuring and reading different PHYs |
3 | * Based on code in sungem_phy.c and gianfar_phy.c | |
4 | * | |
5 | * Author: Andy Fleming | |
6 | * | |
7 | * Copyright (c) 2004 Freescale Semiconductor, Inc. | |
8 | * | |
9 | * This program is free software; you can redistribute it and/or modify it | |
10 | * under the terms of the GNU General Public License as published by the | |
11 | * Free Software Foundation; either version 2 of the License, or (at your | |
12 | * option) any later version. | |
13 | * | |
14 | */ | |
15 | ||
16 | #ifndef __PHY_H | |
17 | #define __PHY_H | |
18 | ||
2220943a | 19 | #include <linux/compiler.h> |
00db8189 | 20 | #include <linux/spinlock.h> |
13df29f6 | 21 | #include <linux/ethtool.h> |
bac83c65 | 22 | #include <linux/mdio.h> |
13df29f6 | 23 | #include <linux/mii.h> |
3e3aaf64 | 24 | #include <linux/module.h> |
13df29f6 MR |
25 | #include <linux/timer.h> |
26 | #include <linux/workqueue.h> | |
8626d3b4 | 27 | #include <linux/mod_devicetable.h> |
2e0bc452 | 28 | #include <linux/phy_led_triggers.h> |
00db8189 | 29 | |
60063497 | 30 | #include <linux/atomic.h> |
0ac49527 | 31 | |
e9fbdf17 | 32 | #define PHY_DEFAULT_FEATURES (SUPPORTED_Autoneg | \ |
00db8189 AF |
33 | SUPPORTED_TP | \ |
34 | SUPPORTED_MII) | |
35 | ||
e9fbdf17 FF |
36 | #define PHY_10BT_FEATURES (SUPPORTED_10baseT_Half | \ |
37 | SUPPORTED_10baseT_Full) | |
38 | ||
39 | #define PHY_100BT_FEATURES (SUPPORTED_100baseT_Half | \ | |
40 | SUPPORTED_100baseT_Full) | |
41 | ||
42 | #define PHY_1000BT_FEATURES (SUPPORTED_1000baseT_Half | \ | |
00db8189 AF |
43 | SUPPORTED_1000baseT_Full) |
44 | ||
e9fbdf17 FF |
45 | #define PHY_BASIC_FEATURES (PHY_10BT_FEATURES | \ |
46 | PHY_100BT_FEATURES | \ | |
47 | PHY_DEFAULT_FEATURES) | |
48 | ||
49 | #define PHY_GBIT_FEATURES (PHY_BASIC_FEATURES | \ | |
50 | PHY_1000BT_FEATURES) | |
51 | ||
52 | ||
c5e38a94 AF |
53 | /* |
54 | * Set phydev->irq to PHY_POLL if interrupts are not supported, | |
00db8189 AF |
55 | * or not desired for this PHY. Set to PHY_IGNORE_INTERRUPT if |
56 | * the attached driver handles the interrupt | |
57 | */ | |
58 | #define PHY_POLL -1 | |
59 | #define PHY_IGNORE_INTERRUPT -2 | |
60 | ||
61 | #define PHY_HAS_INTERRUPT 0x00000001 | |
62 | #define PHY_HAS_MAGICANEG 0x00000002 | |
4284b6a5 | 63 | #define PHY_IS_INTERNAL 0x00000004 |
a9049e0c | 64 | #define MDIO_DEVICE_IS_PHY 0x80000000 |
00db8189 | 65 | |
e8a2b6a4 AF |
66 | /* Interface Mode definitions */ |
67 | typedef enum { | |
4157ef1b | 68 | PHY_INTERFACE_MODE_NA, |
e8a2b6a4 AF |
69 | PHY_INTERFACE_MODE_MII, |
70 | PHY_INTERFACE_MODE_GMII, | |
71 | PHY_INTERFACE_MODE_SGMII, | |
72 | PHY_INTERFACE_MODE_TBI, | |
2cc70ba4 | 73 | PHY_INTERFACE_MODE_REVMII, |
e8a2b6a4 AF |
74 | PHY_INTERFACE_MODE_RMII, |
75 | PHY_INTERFACE_MODE_RGMII, | |
a999589c | 76 | PHY_INTERFACE_MODE_RGMII_ID, |
7d400a4c KP |
77 | PHY_INTERFACE_MODE_RGMII_RXID, |
78 | PHY_INTERFACE_MODE_RGMII_TXID, | |
4157ef1b SG |
79 | PHY_INTERFACE_MODE_RTBI, |
80 | PHY_INTERFACE_MODE_SMII, | |
898dd0bd | 81 | PHY_INTERFACE_MODE_XGMII, |
fd70f72c | 82 | PHY_INTERFACE_MODE_MOCA, |
b9d12085 | 83 | PHY_INTERFACE_MODE_QSGMII, |
572de608 | 84 | PHY_INTERFACE_MODE_TRGMII, |
8a2fe56e | 85 | PHY_INTERFACE_MODE_MAX, |
e8a2b6a4 AF |
86 | } phy_interface_t; |
87 | ||
1f9127ca ZB |
88 | /** |
89 | * phy_supported_speeds - return all speeds currently supported by a phy device | |
90 | * @phy: The phy device to return supported speeds of. | |
91 | * @speeds: buffer to store supported speeds in. | |
92 | * @size: size of speeds buffer. | |
93 | * | |
94 | * Description: Returns the number of supported speeds, and | |
95 | * fills the speeds * buffer with the supported speeds. If speeds buffer is | |
96 | * too small to contain * all currently supported speeds, will return as | |
97 | * many speeds as can fit. | |
98 | */ | |
99 | unsigned int phy_supported_speeds(struct phy_device *phy, | |
100 | unsigned int *speeds, | |
101 | unsigned int size); | |
102 | ||
8a2fe56e FF |
103 | /** |
104 | * It maps 'enum phy_interface_t' found in include/linux/phy.h | |
105 | * into the device tree binding of 'phy-mode', so that Ethernet | |
106 | * device driver can get phy interface from device tree. | |
107 | */ | |
108 | static inline const char *phy_modes(phy_interface_t interface) | |
109 | { | |
110 | switch (interface) { | |
111 | case PHY_INTERFACE_MODE_NA: | |
112 | return ""; | |
113 | case PHY_INTERFACE_MODE_MII: | |
114 | return "mii"; | |
115 | case PHY_INTERFACE_MODE_GMII: | |
116 | return "gmii"; | |
117 | case PHY_INTERFACE_MODE_SGMII: | |
118 | return "sgmii"; | |
119 | case PHY_INTERFACE_MODE_TBI: | |
120 | return "tbi"; | |
121 | case PHY_INTERFACE_MODE_REVMII: | |
122 | return "rev-mii"; | |
123 | case PHY_INTERFACE_MODE_RMII: | |
124 | return "rmii"; | |
125 | case PHY_INTERFACE_MODE_RGMII: | |
126 | return "rgmii"; | |
127 | case PHY_INTERFACE_MODE_RGMII_ID: | |
128 | return "rgmii-id"; | |
129 | case PHY_INTERFACE_MODE_RGMII_RXID: | |
130 | return "rgmii-rxid"; | |
131 | case PHY_INTERFACE_MODE_RGMII_TXID: | |
132 | return "rgmii-txid"; | |
133 | case PHY_INTERFACE_MODE_RTBI: | |
134 | return "rtbi"; | |
135 | case PHY_INTERFACE_MODE_SMII: | |
136 | return "smii"; | |
137 | case PHY_INTERFACE_MODE_XGMII: | |
138 | return "xgmii"; | |
fd70f72c FF |
139 | case PHY_INTERFACE_MODE_MOCA: |
140 | return "moca"; | |
b9d12085 TP |
141 | case PHY_INTERFACE_MODE_QSGMII: |
142 | return "qsgmii"; | |
572de608 SW |
143 | case PHY_INTERFACE_MODE_TRGMII: |
144 | return "trgmii"; | |
8a2fe56e FF |
145 | default: |
146 | return "unknown"; | |
147 | } | |
148 | } | |
149 | ||
00db8189 | 150 | |
e8a2b6a4 | 151 | #define PHY_INIT_TIMEOUT 100000 |
00db8189 AF |
152 | #define PHY_STATE_TIME 1 |
153 | #define PHY_FORCE_TIMEOUT 10 | |
154 | #define PHY_AN_TIMEOUT 10 | |
155 | ||
e8a2b6a4 | 156 | #define PHY_MAX_ADDR 32 |
00db8189 | 157 | |
a4d00f17 | 158 | /* Used when trying to connect to a specific phy (mii bus id:phy device id) */ |
9d9326d3 AF |
159 | #define PHY_ID_FMT "%s:%02x" |
160 | ||
161 | /* | |
162 | * Need to be a little smaller than phydev->dev.bus_id to leave room | |
163 | * for the ":%02x" | |
164 | */ | |
8e401ecc | 165 | #define MII_BUS_ID_SIZE (20 - 3) |
a4d00f17 | 166 | |
abf35df2 JG |
167 | /* Or MII_ADDR_C45 into regnum for read/write on mii_bus to enable the 21 bit |
168 | IEEE 802.3ae clause 45 addressing mode used by 10GIGE phy chips. */ | |
169 | #define MII_ADDR_C45 (1<<30) | |
170 | ||
313162d0 PG |
171 | struct device; |
172 | struct sk_buff; | |
173 | ||
c5e38a94 AF |
174 | /* |
175 | * The Bus class for PHYs. Devices which provide access to | |
176 | * PHYs should register using this structure | |
177 | */ | |
00db8189 | 178 | struct mii_bus { |
3e3aaf64 | 179 | struct module *owner; |
00db8189 | 180 | const char *name; |
9d9326d3 | 181 | char id[MII_BUS_ID_SIZE]; |
00db8189 | 182 | void *priv; |
ccaa953e AL |
183 | int (*read)(struct mii_bus *bus, int addr, int regnum); |
184 | int (*write)(struct mii_bus *bus, int addr, int regnum, u16 val); | |
00db8189 AF |
185 | int (*reset)(struct mii_bus *bus); |
186 | ||
c5e38a94 AF |
187 | /* |
188 | * A lock to ensure that only one thing can read/write | |
189 | * the MDIO bus at a time | |
190 | */ | |
35b5f6b1 | 191 | struct mutex mdio_lock; |
00db8189 | 192 | |
18ee49dd | 193 | struct device *parent; |
46abc021 LB |
194 | enum { |
195 | MDIOBUS_ALLOCATED = 1, | |
196 | MDIOBUS_REGISTERED, | |
197 | MDIOBUS_UNREGISTERED, | |
198 | MDIOBUS_RELEASED, | |
199 | } state; | |
200 | struct device dev; | |
00db8189 AF |
201 | |
202 | /* list of all PHYs on bus */ | |
7f854420 | 203 | struct mdio_device *mdio_map[PHY_MAX_ADDR]; |
00db8189 | 204 | |
c6883996 | 205 | /* PHY addresses to be ignored when probing */ |
f896424c MP |
206 | u32 phy_mask; |
207 | ||
922f2dd1 FF |
208 | /* PHY addresses to ignore the TA/read failure */ |
209 | u32 phy_ignore_ta_mask; | |
210 | ||
c5e38a94 | 211 | /* |
e7f4dc35 AL |
212 | * An array of interrupts, each PHY's interrupt at the index |
213 | * matching its address | |
c5e38a94 | 214 | */ |
e7f4dc35 | 215 | int irq[PHY_MAX_ADDR]; |
00db8189 | 216 | }; |
46abc021 | 217 | #define to_mii_bus(d) container_of(d, struct mii_bus, dev) |
00db8189 | 218 | |
eb8a54a7 TT |
219 | struct mii_bus *mdiobus_alloc_size(size_t); |
220 | static inline struct mii_bus *mdiobus_alloc(void) | |
221 | { | |
222 | return mdiobus_alloc_size(0); | |
223 | } | |
224 | ||
3e3aaf64 RK |
225 | int __mdiobus_register(struct mii_bus *bus, struct module *owner); |
226 | #define mdiobus_register(bus) __mdiobus_register(bus, THIS_MODULE) | |
2e888103 LB |
227 | void mdiobus_unregister(struct mii_bus *bus); |
228 | void mdiobus_free(struct mii_bus *bus); | |
6d48f44b GS |
229 | struct mii_bus *devm_mdiobus_alloc_size(struct device *dev, int sizeof_priv); |
230 | static inline struct mii_bus *devm_mdiobus_alloc(struct device *dev) | |
231 | { | |
232 | return devm_mdiobus_alloc_size(dev, 0); | |
233 | } | |
234 | ||
235 | void devm_mdiobus_free(struct device *dev, struct mii_bus *bus); | |
2e888103 | 236 | struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr); |
2e888103 | 237 | |
e8a2b6a4 AF |
238 | #define PHY_INTERRUPT_DISABLED 0x0 |
239 | #define PHY_INTERRUPT_ENABLED 0x80000000 | |
00db8189 AF |
240 | |
241 | /* PHY state machine states: | |
242 | * | |
243 | * DOWN: PHY device and driver are not ready for anything. probe | |
244 | * should be called if and only if the PHY is in this state, | |
245 | * given that the PHY device exists. | |
246 | * - PHY driver probe function will, depending on the PHY, set | |
247 | * the state to STARTING or READY | |
248 | * | |
249 | * STARTING: PHY device is coming up, and the ethernet driver is | |
250 | * not ready. PHY drivers may set this in the probe function. | |
251 | * If they do, they are responsible for making sure the state is | |
252 | * eventually set to indicate whether the PHY is UP or READY, | |
253 | * depending on the state when the PHY is done starting up. | |
254 | * - PHY driver will set the state to READY | |
255 | * - start will set the state to PENDING | |
256 | * | |
257 | * READY: PHY is ready to send and receive packets, but the | |
258 | * controller is not. By default, PHYs which do not implement | |
259 | * probe will be set to this state by phy_probe(). If the PHY | |
260 | * driver knows the PHY is ready, and the PHY state is STARTING, | |
261 | * then it sets this STATE. | |
262 | * - start will set the state to UP | |
263 | * | |
264 | * PENDING: PHY device is coming up, but the ethernet driver is | |
265 | * ready. phy_start will set this state if the PHY state is | |
266 | * STARTING. | |
267 | * - PHY driver will set the state to UP when the PHY is ready | |
268 | * | |
269 | * UP: The PHY and attached device are ready to do work. | |
270 | * Interrupts should be started here. | |
271 | * - timer moves to AN | |
272 | * | |
273 | * AN: The PHY is currently negotiating the link state. Link is | |
274 | * therefore down for now. phy_timer will set this state when it | |
275 | * detects the state is UP. config_aneg will set this state | |
276 | * whenever called with phydev->autoneg set to AUTONEG_ENABLE. | |
277 | * - If autonegotiation finishes, but there's no link, it sets | |
278 | * the state to NOLINK. | |
279 | * - If aneg finishes with link, it sets the state to RUNNING, | |
280 | * and calls adjust_link | |
281 | * - If autonegotiation did not finish after an arbitrary amount | |
282 | * of time, autonegotiation should be tried again if the PHY | |
283 | * supports "magic" autonegotiation (back to AN) | |
284 | * - If it didn't finish, and no magic_aneg, move to FORCING. | |
285 | * | |
286 | * NOLINK: PHY is up, but not currently plugged in. | |
287 | * - If the timer notes that the link comes back, we move to RUNNING | |
288 | * - config_aneg moves to AN | |
289 | * - phy_stop moves to HALTED | |
290 | * | |
291 | * FORCING: PHY is being configured with forced settings | |
292 | * - if link is up, move to RUNNING | |
293 | * - If link is down, we drop to the next highest setting, and | |
294 | * retry (FORCING) after a timeout | |
295 | * - phy_stop moves to HALTED | |
296 | * | |
297 | * RUNNING: PHY is currently up, running, and possibly sending | |
298 | * and/or receiving packets | |
299 | * - timer will set CHANGELINK if we're polling (this ensures the | |
300 | * link state is polled every other cycle of this state machine, | |
301 | * which makes it every other second) | |
302 | * - irq will set CHANGELINK | |
303 | * - config_aneg will set AN | |
304 | * - phy_stop moves to HALTED | |
305 | * | |
306 | * CHANGELINK: PHY experienced a change in link state | |
307 | * - timer moves to RUNNING if link | |
308 | * - timer moves to NOLINK if the link is down | |
309 | * - phy_stop moves to HALTED | |
310 | * | |
311 | * HALTED: PHY is up, but no polling or interrupts are done. Or | |
312 | * PHY is in an error state. | |
313 | * | |
314 | * - phy_start moves to RESUMING | |
315 | * | |
316 | * RESUMING: PHY was halted, but now wants to run again. | |
317 | * - If we are forcing, or aneg is done, timer moves to RUNNING | |
318 | * - If aneg is not done, timer moves to AN | |
319 | * - phy_stop moves to HALTED | |
320 | */ | |
321 | enum phy_state { | |
4017b4d3 | 322 | PHY_DOWN = 0, |
00db8189 AF |
323 | PHY_STARTING, |
324 | PHY_READY, | |
325 | PHY_PENDING, | |
326 | PHY_UP, | |
327 | PHY_AN, | |
328 | PHY_RUNNING, | |
329 | PHY_NOLINK, | |
330 | PHY_FORCING, | |
331 | PHY_CHANGELINK, | |
332 | PHY_HALTED, | |
333 | PHY_RESUMING | |
334 | }; | |
335 | ||
ac28b9f8 DD |
336 | /** |
337 | * struct phy_c45_device_ids - 802.3-c45 Device Identifiers | |
338 | * @devices_in_package: Bit vector of devices present. | |
339 | * @device_ids: The device identifer for each present device. | |
340 | */ | |
341 | struct phy_c45_device_ids { | |
342 | u32 devices_in_package; | |
343 | u32 device_ids[8]; | |
344 | }; | |
c1f19b51 | 345 | |
00db8189 AF |
346 | /* phy_device: An instance of a PHY |
347 | * | |
348 | * drv: Pointer to the driver for this PHY instance | |
00db8189 | 349 | * phy_id: UID for this device found during discovery |
ac28b9f8 DD |
350 | * c45_ids: 802.3-c45 Device Identifers if is_c45. |
351 | * is_c45: Set to true if this phy uses clause 45 addressing. | |
4284b6a5 | 352 | * is_internal: Set to true if this phy is internal to a MAC. |
5a11dd7d | 353 | * is_pseudo_fixed_link: Set to true if this phy is an Ethernet switch, etc. |
aae88261 | 354 | * has_fixups: Set to true if this phy has fixups/quirks. |
8a477a6f | 355 | * suspended: Set to true if this phy has been suspended successfully. |
00db8189 AF |
356 | * state: state of the PHY for management purposes |
357 | * dev_flags: Device-specific flags used by the PHY driver. | |
00db8189 AF |
358 | * link_timeout: The number of timer firings to wait before the |
359 | * giving up on the current attempt at acquiring a link | |
360 | * irq: IRQ number of the PHY's interrupt (-1 if none) | |
361 | * phy_timer: The timer for handling the state machine | |
664fcf12 | 362 | * phy_queue: A work_queue for the phy_mac_interrupt |
00db8189 AF |
363 | * attached_dev: The attached enet driver's device instance ptr |
364 | * adjust_link: Callback for the enet controller to respond to | |
365 | * changes in the link state. | |
00db8189 | 366 | * |
114002bc FF |
367 | * speed, duplex, pause, supported, advertising, lp_advertising, |
368 | * and autoneg are used like in mii_if_info | |
00db8189 AF |
369 | * |
370 | * interrupts currently only supports enabled or disabled, | |
371 | * but could be changed in the future to support enabling | |
372 | * and disabling specific interrupts | |
373 | * | |
374 | * Contains some infrastructure for polling and interrupt | |
375 | * handling, as well as handling shifts in PHY hardware state | |
376 | */ | |
377 | struct phy_device { | |
e5a03bfd AL |
378 | struct mdio_device mdio; |
379 | ||
00db8189 AF |
380 | /* Information about the PHY type */ |
381 | /* And management functions */ | |
382 | struct phy_driver *drv; | |
383 | ||
00db8189 AF |
384 | u32 phy_id; |
385 | ||
ac28b9f8 DD |
386 | struct phy_c45_device_ids c45_ids; |
387 | bool is_c45; | |
4284b6a5 | 388 | bool is_internal; |
5a11dd7d | 389 | bool is_pseudo_fixed_link; |
b0ae009f | 390 | bool has_fixups; |
8a477a6f | 391 | bool suspended; |
ac28b9f8 | 392 | |
00db8189 AF |
393 | enum phy_state state; |
394 | ||
395 | u32 dev_flags; | |
396 | ||
e8a2b6a4 AF |
397 | phy_interface_t interface; |
398 | ||
c5e38a94 AF |
399 | /* |
400 | * forced speed & duplex (no autoneg) | |
00db8189 AF |
401 | * partner speed & duplex & pause (autoneg) |
402 | */ | |
403 | int speed; | |
404 | int duplex; | |
405 | int pause; | |
406 | int asym_pause; | |
407 | ||
408 | /* The most recently read link state */ | |
409 | int link; | |
410 | ||
411 | /* Enabled Interrupts */ | |
412 | u32 interrupts; | |
413 | ||
414 | /* Union of PHY and Attached devices' supported modes */ | |
415 | /* See mii.h for more info */ | |
416 | u32 supported; | |
417 | u32 advertising; | |
114002bc | 418 | u32 lp_advertising; |
00db8189 | 419 | |
d853d145 | 420 | /* Energy efficient ethernet modes which should be prohibited */ |
421 | u32 eee_broken_modes; | |
422 | ||
00db8189 AF |
423 | int autoneg; |
424 | ||
425 | int link_timeout; | |
426 | ||
2e0bc452 ZB |
427 | #ifdef CONFIG_LED_TRIGGER_PHY |
428 | struct phy_led_trigger *phy_led_triggers; | |
429 | unsigned int phy_num_led_triggers; | |
430 | struct phy_led_trigger *last_triggered; | |
431 | #endif | |
432 | ||
c5e38a94 AF |
433 | /* |
434 | * Interrupt number for this PHY | |
435 | * -1 means no interrupt | |
436 | */ | |
00db8189 AF |
437 | int irq; |
438 | ||
439 | /* private data pointer */ | |
440 | /* For use by PHYs to maintain extra state */ | |
441 | void *priv; | |
442 | ||
443 | /* Interrupt and Polling infrastructure */ | |
444 | struct work_struct phy_queue; | |
a390d1f3 | 445 | struct delayed_work state_queue; |
0ac49527 | 446 | atomic_t irq_disable; |
00db8189 | 447 | |
35b5f6b1 | 448 | struct mutex lock; |
00db8189 AF |
449 | |
450 | struct net_device *attached_dev; | |
451 | ||
634ec36c | 452 | u8 mdix; |
f4ed2fe3 | 453 | u8 mdix_ctrl; |
634ec36c | 454 | |
00db8189 | 455 | void (*adjust_link)(struct net_device *dev); |
00db8189 | 456 | }; |
e5a03bfd AL |
457 | #define to_phy_device(d) container_of(to_mdio_device(d), \ |
458 | struct phy_device, mdio) | |
00db8189 AF |
459 | |
460 | /* struct phy_driver: Driver structure for a particular PHY type | |
461 | * | |
a9049e0c | 462 | * driver_data: static driver data |
00db8189 AF |
463 | * phy_id: The result of reading the UID registers of this PHY |
464 | * type, and ANDing them with the phy_id_mask. This driver | |
465 | * only works for PHYs with IDs which match this field | |
466 | * name: The friendly name of this PHY type | |
467 | * phy_id_mask: Defines the important bits of the phy_id | |
468 | * features: A list of features (speed, duplex, etc) supported | |
469 | * by this PHY | |
470 | * flags: A bitfield defining certain other features this PHY | |
471 | * supports (like interrupts) | |
472 | * | |
473 | * The drivers must implement config_aneg and read_status. All | |
474 | * other functions are optional. Note that none of these | |
475 | * functions should be called from interrupt time. The goal is | |
476 | * for the bus read/write functions to be able to block when the | |
477 | * bus transaction is happening, and be freed up by an interrupt | |
478 | * (The MPC85xx has this ability, though it is not currently | |
479 | * supported in the driver). | |
480 | */ | |
481 | struct phy_driver { | |
a9049e0c | 482 | struct mdio_driver_common mdiodrv; |
00db8189 AF |
483 | u32 phy_id; |
484 | char *name; | |
485 | unsigned int phy_id_mask; | |
486 | u32 features; | |
487 | u32 flags; | |
860f6e9e | 488 | const void *driver_data; |
00db8189 | 489 | |
c5e38a94 | 490 | /* |
9df81dd7 FF |
491 | * Called to issue a PHY software reset |
492 | */ | |
493 | int (*soft_reset)(struct phy_device *phydev); | |
494 | ||
495 | /* | |
c5e38a94 AF |
496 | * Called to initialize the PHY, |
497 | * including after a reset | |
498 | */ | |
00db8189 AF |
499 | int (*config_init)(struct phy_device *phydev); |
500 | ||
c5e38a94 AF |
501 | /* |
502 | * Called during discovery. Used to set | |
503 | * up device-specific structures, if any | |
504 | */ | |
00db8189 AF |
505 | int (*probe)(struct phy_device *phydev); |
506 | ||
507 | /* PHY Power Management */ | |
508 | int (*suspend)(struct phy_device *phydev); | |
509 | int (*resume)(struct phy_device *phydev); | |
510 | ||
c5e38a94 AF |
511 | /* |
512 | * Configures the advertisement and resets | |
00db8189 AF |
513 | * autonegotiation if phydev->autoneg is on, |
514 | * forces the speed to the current settings in phydev | |
c5e38a94 AF |
515 | * if phydev->autoneg is off |
516 | */ | |
00db8189 AF |
517 | int (*config_aneg)(struct phy_device *phydev); |
518 | ||
76a423a3 FF |
519 | /* Determines the auto negotiation result */ |
520 | int (*aneg_done)(struct phy_device *phydev); | |
521 | ||
00db8189 AF |
522 | /* Determines the negotiated speed and duplex */ |
523 | int (*read_status)(struct phy_device *phydev); | |
524 | ||
525 | /* Clears any pending interrupts */ | |
526 | int (*ack_interrupt)(struct phy_device *phydev); | |
527 | ||
528 | /* Enables or disables interrupts */ | |
529 | int (*config_intr)(struct phy_device *phydev); | |
530 | ||
a8729eb3 AG |
531 | /* |
532 | * Checks if the PHY generated an interrupt. | |
533 | * For multi-PHY devices with shared PHY interrupt pin | |
534 | */ | |
535 | int (*did_interrupt)(struct phy_device *phydev); | |
536 | ||
00db8189 AF |
537 | /* Clears up any memory if needed */ |
538 | void (*remove)(struct phy_device *phydev); | |
539 | ||
a30e2c18 DD |
540 | /* Returns true if this is a suitable driver for the given |
541 | * phydev. If NULL, matching is based on phy_id and | |
542 | * phy_id_mask. | |
543 | */ | |
544 | int (*match_phy_device)(struct phy_device *phydev); | |
545 | ||
c8f3a8c3 RC |
546 | /* Handles ethtool queries for hardware time stamping. */ |
547 | int (*ts_info)(struct phy_device *phydev, struct ethtool_ts_info *ti); | |
548 | ||
c1f19b51 RC |
549 | /* Handles SIOCSHWTSTAMP ioctl for hardware time stamping. */ |
550 | int (*hwtstamp)(struct phy_device *phydev, struct ifreq *ifr); | |
551 | ||
552 | /* | |
553 | * Requests a Rx timestamp for 'skb'. If the skb is accepted, | |
554 | * the phy driver promises to deliver it using netif_rx() as | |
555 | * soon as a timestamp becomes available. One of the | |
556 | * PTP_CLASS_ values is passed in 'type'. The function must | |
557 | * return true if the skb is accepted for delivery. | |
558 | */ | |
559 | bool (*rxtstamp)(struct phy_device *dev, struct sk_buff *skb, int type); | |
560 | ||
561 | /* | |
562 | * Requests a Tx timestamp for 'skb'. The phy driver promises | |
da92b194 | 563 | * to deliver it using skb_complete_tx_timestamp() as soon as a |
c1f19b51 RC |
564 | * timestamp becomes available. One of the PTP_CLASS_ values |
565 | * is passed in 'type'. | |
566 | */ | |
567 | void (*txtstamp)(struct phy_device *dev, struct sk_buff *skb, int type); | |
568 | ||
42e836eb MS |
569 | /* Some devices (e.g. qnap TS-119P II) require PHY register changes to |
570 | * enable Wake on LAN, so set_wol is provided to be called in the | |
571 | * ethernet driver's set_wol function. */ | |
572 | int (*set_wol)(struct phy_device *dev, struct ethtool_wolinfo *wol); | |
573 | ||
574 | /* See set_wol, but for checking whether Wake on LAN is enabled. */ | |
575 | void (*get_wol)(struct phy_device *dev, struct ethtool_wolinfo *wol); | |
576 | ||
2b8f2a28 DM |
577 | /* |
578 | * Called to inform a PHY device driver when the core is about to | |
579 | * change the link state. This callback is supposed to be used as | |
580 | * fixup hook for drivers that need to take action when the link | |
581 | * state changes. Drivers are by no means allowed to mess with the | |
582 | * PHY device structure in their implementations. | |
583 | */ | |
584 | void (*link_change_notify)(struct phy_device *dev); | |
585 | ||
0c1d77df VB |
586 | /* A function provided by a phy specific driver to override the |
587 | * the PHY driver framework support for reading a MMD register | |
588 | * from the PHY. If not supported, return -1. This function is | |
589 | * optional for PHY specific drivers, if not provided then the | |
590 | * default MMD read function is used by the PHY framework. | |
591 | */ | |
592 | int (*read_mmd_indirect)(struct phy_device *dev, int ptrad, | |
593 | int devnum, int regnum); | |
594 | ||
595 | /* A function provided by a phy specific driver to override the | |
596 | * the PHY driver framework support for writing a MMD register | |
597 | * from the PHY. This function is optional for PHY specific drivers, | |
598 | * if not provided then the default MMD read function is used by | |
599 | * the PHY framework. | |
600 | */ | |
601 | void (*write_mmd_indirect)(struct phy_device *dev, int ptrad, | |
602 | int devnum, int regnum, u32 val); | |
603 | ||
2f438366 ES |
604 | /* Get the size and type of the eeprom contained within a plug-in |
605 | * module */ | |
606 | int (*module_info)(struct phy_device *dev, | |
607 | struct ethtool_modinfo *modinfo); | |
608 | ||
609 | /* Get the eeprom information from the plug-in module */ | |
610 | int (*module_eeprom)(struct phy_device *dev, | |
611 | struct ethtool_eeprom *ee, u8 *data); | |
612 | ||
f3a40945 AL |
613 | /* Get statistics from the phy using ethtool */ |
614 | int (*get_sset_count)(struct phy_device *dev); | |
615 | void (*get_strings)(struct phy_device *dev, u8 *data); | |
616 | void (*get_stats)(struct phy_device *dev, | |
617 | struct ethtool_stats *stats, u64 *data); | |
968ad9da RL |
618 | |
619 | /* Get and Set PHY tunables */ | |
620 | int (*get_tunable)(struct phy_device *dev, | |
621 | struct ethtool_tunable *tuna, void *data); | |
622 | int (*set_tunable)(struct phy_device *dev, | |
623 | struct ethtool_tunable *tuna, | |
624 | const void *data); | |
00db8189 | 625 | }; |
a9049e0c AL |
626 | #define to_phy_driver(d) container_of(to_mdio_common_driver(d), \ |
627 | struct phy_driver, mdiodrv) | |
00db8189 | 628 | |
f62220d3 AF |
629 | #define PHY_ANY_ID "MATCH ANY PHY" |
630 | #define PHY_ANY_UID 0xffffffff | |
631 | ||
632 | /* A Structure for boards to register fixups with the PHY Lib */ | |
633 | struct phy_fixup { | |
634 | struct list_head list; | |
8e401ecc | 635 | char bus_id[20]; |
f62220d3 AF |
636 | u32 phy_uid; |
637 | u32 phy_uid_mask; | |
638 | int (*run)(struct phy_device *phydev); | |
639 | }; | |
640 | ||
efabdfb9 AF |
641 | /** |
642 | * phy_read_mmd - Convenience function for reading a register | |
643 | * from an MMD on a given PHY. | |
644 | * @phydev: The phy_device struct | |
645 | * @devad: The MMD to read from | |
646 | * @regnum: The register on the MMD to read | |
647 | * | |
648 | * Same rules as for phy_read(); | |
649 | */ | |
650 | static inline int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum) | |
651 | { | |
652 | if (!phydev->is_c45) | |
653 | return -EOPNOTSUPP; | |
654 | ||
e5a03bfd | 655 | return mdiobus_read(phydev->mdio.bus, phydev->mdio.addr, |
efabdfb9 AF |
656 | MII_ADDR_C45 | (devad << 16) | (regnum & 0xffff)); |
657 | } | |
658 | ||
66ce7fb9 FF |
659 | /** |
660 | * phy_read_mmd_indirect - reads data from the MMD registers | |
661 | * @phydev: The PHY device bus | |
662 | * @prtad: MMD Address | |
66ce7fb9 FF |
663 | * @addr: PHY address on the MII bus |
664 | * | |
665 | * Description: it reads data from the MMD registers (clause 22 to access to | |
666 | * clause 45) of the specified phy address. | |
667 | */ | |
053e7e16 | 668 | int phy_read_mmd_indirect(struct phy_device *phydev, int prtad, int devad); |
66ce7fb9 | 669 | |
2e888103 LB |
670 | /** |
671 | * phy_read - Convenience function for reading a given PHY register | |
672 | * @phydev: the phy_device struct | |
673 | * @regnum: register number to read | |
674 | * | |
675 | * NOTE: MUST NOT be called from interrupt context, | |
676 | * because the bus read/write functions may wait for an interrupt | |
677 | * to conclude the operation. | |
678 | */ | |
abf35df2 | 679 | static inline int phy_read(struct phy_device *phydev, u32 regnum) |
2e888103 | 680 | { |
e5a03bfd | 681 | return mdiobus_read(phydev->mdio.bus, phydev->mdio.addr, regnum); |
2e888103 LB |
682 | } |
683 | ||
684 | /** | |
685 | * phy_write - Convenience function for writing a given PHY register | |
686 | * @phydev: the phy_device struct | |
687 | * @regnum: register number to write | |
688 | * @val: value to write to @regnum | |
689 | * | |
690 | * NOTE: MUST NOT be called from interrupt context, | |
691 | * because the bus read/write functions may wait for an interrupt | |
692 | * to conclude the operation. | |
693 | */ | |
abf35df2 | 694 | static inline int phy_write(struct phy_device *phydev, u32 regnum, u16 val) |
2e888103 | 695 | { |
e5a03bfd | 696 | return mdiobus_write(phydev->mdio.bus, phydev->mdio.addr, regnum, val); |
2e888103 LB |
697 | } |
698 | ||
2c7b4921 FF |
699 | /** |
700 | * phy_interrupt_is_valid - Convenience function for testing a given PHY irq | |
701 | * @phydev: the phy_device struct | |
702 | * | |
703 | * NOTE: must be kept in sync with addition/removal of PHY_POLL and | |
704 | * PHY_IGNORE_INTERRUPT | |
705 | */ | |
706 | static inline bool phy_interrupt_is_valid(struct phy_device *phydev) | |
707 | { | |
708 | return phydev->irq != PHY_POLL && phydev->irq != PHY_IGNORE_INTERRUPT; | |
709 | } | |
710 | ||
4284b6a5 FF |
711 | /** |
712 | * phy_is_internal - Convenience function for testing if a PHY is internal | |
713 | * @phydev: the phy_device struct | |
714 | */ | |
715 | static inline bool phy_is_internal(struct phy_device *phydev) | |
716 | { | |
717 | return phydev->is_internal; | |
718 | } | |
719 | ||
e463d88c FF |
720 | /** |
721 | * phy_interface_is_rgmii - Convenience function for testing if a PHY interface | |
722 | * is RGMII (all variants) | |
723 | * @phydev: the phy_device struct | |
724 | */ | |
725 | static inline bool phy_interface_is_rgmii(struct phy_device *phydev) | |
726 | { | |
727 | return phydev->interface >= PHY_INTERFACE_MODE_RGMII && | |
728 | phydev->interface <= PHY_INTERFACE_MODE_RGMII_TXID; | |
5a11dd7d FF |
729 | }; |
730 | ||
731 | /* | |
732 | * phy_is_pseudo_fixed_link - Convenience function for testing if this | |
733 | * PHY is the CPU port facing side of an Ethernet switch, or similar. | |
734 | * @phydev: the phy_device struct | |
735 | */ | |
736 | static inline bool phy_is_pseudo_fixed_link(struct phy_device *phydev) | |
737 | { | |
738 | return phydev->is_pseudo_fixed_link; | |
e463d88c FF |
739 | } |
740 | ||
efabdfb9 AF |
741 | /** |
742 | * phy_write_mmd - Convenience function for writing a register | |
743 | * on an MMD on a given PHY. | |
744 | * @phydev: The phy_device struct | |
745 | * @devad: The MMD to read from | |
746 | * @regnum: The register on the MMD to read | |
747 | * @val: value to write to @regnum | |
748 | * | |
749 | * Same rules as for phy_write(); | |
750 | */ | |
751 | static inline int phy_write_mmd(struct phy_device *phydev, int devad, | |
752 | u32 regnum, u16 val) | |
753 | { | |
754 | if (!phydev->is_c45) | |
755 | return -EOPNOTSUPP; | |
756 | ||
757 | regnum = MII_ADDR_C45 | ((devad & 0x1f) << 16) | (regnum & 0xffff); | |
758 | ||
e5a03bfd | 759 | return mdiobus_write(phydev->mdio.bus, phydev->mdio.addr, regnum, val); |
efabdfb9 AF |
760 | } |
761 | ||
66ce7fb9 FF |
762 | /** |
763 | * phy_write_mmd_indirect - writes data to the MMD registers | |
764 | * @phydev: The PHY device | |
765 | * @prtad: MMD Address | |
766 | * @devad: MMD DEVAD | |
66ce7fb9 FF |
767 | * @data: data to write in the MMD register |
768 | * | |
769 | * Description: Write data from the MMD registers of the specified | |
770 | * phy address. | |
771 | */ | |
772 | void phy_write_mmd_indirect(struct phy_device *phydev, int prtad, | |
053e7e16 | 773 | int devad, u32 data); |
66ce7fb9 | 774 | |
ac28b9f8 | 775 | struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id, |
4017b4d3 SS |
776 | bool is_c45, |
777 | struct phy_c45_device_ids *c45_ids); | |
ac28b9f8 | 778 | struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45); |
4dea547f | 779 | int phy_device_register(struct phy_device *phy); |
38737e49 | 780 | void phy_device_remove(struct phy_device *phydev); |
2f5cb434 | 781 | int phy_init_hw(struct phy_device *phydev); |
481b5d93 SH |
782 | int phy_suspend(struct phy_device *phydev); |
783 | int phy_resume(struct phy_device *phydev); | |
4017b4d3 SS |
784 | struct phy_device *phy_attach(struct net_device *dev, const char *bus_id, |
785 | phy_interface_t interface); | |
f8f76db1 | 786 | struct phy_device *phy_find_first(struct mii_bus *bus); |
257184d7 AF |
787 | int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, |
788 | u32 flags, phy_interface_t interface); | |
fa94f6d9 | 789 | int phy_connect_direct(struct net_device *dev, struct phy_device *phydev, |
4017b4d3 SS |
790 | void (*handler)(struct net_device *), |
791 | phy_interface_t interface); | |
792 | struct phy_device *phy_connect(struct net_device *dev, const char *bus_id, | |
793 | void (*handler)(struct net_device *), | |
794 | phy_interface_t interface); | |
e1393456 AF |
795 | void phy_disconnect(struct phy_device *phydev); |
796 | void phy_detach(struct phy_device *phydev); | |
797 | void phy_start(struct phy_device *phydev); | |
798 | void phy_stop(struct phy_device *phydev); | |
799 | int phy_start_aneg(struct phy_device *phydev); | |
372788f9 | 800 | int phy_aneg_done(struct phy_device *phydev); |
e1393456 | 801 | |
e1393456 | 802 | int phy_stop_interrupts(struct phy_device *phydev); |
00db8189 | 803 | |
4017b4d3 SS |
804 | static inline int phy_read_status(struct phy_device *phydev) |
805 | { | |
00db8189 AF |
806 | return phydev->drv->read_status(phydev); |
807 | } | |
808 | ||
72ba48be | 809 | #define phydev_err(_phydev, format, args...) \ |
e5a03bfd | 810 | dev_err(&_phydev->mdio.dev, format, ##args) |
72ba48be AL |
811 | |
812 | #define phydev_dbg(_phydev, format, args...) \ | |
e5a03bfd | 813 | dev_dbg(&_phydev->mdio.dev, format, ##args); |
72ba48be | 814 | |
84eff6d1 AL |
815 | static inline const char *phydev_name(const struct phy_device *phydev) |
816 | { | |
e5a03bfd | 817 | return dev_name(&phydev->mdio.dev); |
84eff6d1 AL |
818 | } |
819 | ||
2220943a AL |
820 | void phy_attached_print(struct phy_device *phydev, const char *fmt, ...) |
821 | __printf(2, 3); | |
822 | void phy_attached_info(struct phy_device *phydev); | |
af6b6967 | 823 | int genphy_config_init(struct phy_device *phydev); |
3fb69bca | 824 | int genphy_setup_forced(struct phy_device *phydev); |
00db8189 AF |
825 | int genphy_restart_aneg(struct phy_device *phydev); |
826 | int genphy_config_aneg(struct phy_device *phydev); | |
a9fa6e6a | 827 | int genphy_aneg_done(struct phy_device *phydev); |
00db8189 AF |
828 | int genphy_update_link(struct phy_device *phydev); |
829 | int genphy_read_status(struct phy_device *phydev); | |
0f0ca340 GC |
830 | int genphy_suspend(struct phy_device *phydev); |
831 | int genphy_resume(struct phy_device *phydev); | |
797ac071 | 832 | int genphy_soft_reset(struct phy_device *phydev); |
00db8189 | 833 | void phy_driver_unregister(struct phy_driver *drv); |
d5bf9071 | 834 | void phy_drivers_unregister(struct phy_driver *drv, int n); |
be01da72 AL |
835 | int phy_driver_register(struct phy_driver *new_driver, struct module *owner); |
836 | int phy_drivers_register(struct phy_driver *new_driver, int n, | |
837 | struct module *owner); | |
4f9c85a1 | 838 | void phy_state_machine(struct work_struct *work); |
664fcf12 AL |
839 | void phy_change(struct phy_device *phydev); |
840 | void phy_change_work(struct work_struct *work); | |
5ea94e76 | 841 | void phy_mac_interrupt(struct phy_device *phydev, int new_link); |
29935aeb | 842 | void phy_start_machine(struct phy_device *phydev); |
00db8189 AF |
843 | void phy_stop_machine(struct phy_device *phydev); |
844 | int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd); | |
845 | int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd); | |
2d55173e PR |
846 | int phy_ethtool_ksettings_get(struct phy_device *phydev, |
847 | struct ethtool_link_ksettings *cmd); | |
848 | int phy_ethtool_ksettings_set(struct phy_device *phydev, | |
849 | const struct ethtool_link_ksettings *cmd); | |
4017b4d3 | 850 | int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd); |
e1393456 AF |
851 | int phy_start_interrupts(struct phy_device *phydev); |
852 | void phy_print_status(struct phy_device *phydev); | |
6f4a7f41 | 853 | void phy_device_free(struct phy_device *phydev); |
f3a6bd39 | 854 | int phy_set_max_speed(struct phy_device *phydev, u32 max_speed); |
00db8189 | 855 | |
f62220d3 | 856 | int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask, |
4017b4d3 | 857 | int (*run)(struct phy_device *)); |
f62220d3 | 858 | int phy_register_fixup_for_id(const char *bus_id, |
4017b4d3 | 859 | int (*run)(struct phy_device *)); |
f62220d3 | 860 | int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask, |
4017b4d3 | 861 | int (*run)(struct phy_device *)); |
f62220d3 | 862 | |
f38e7a32 WH |
863 | int phy_unregister_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask); |
864 | int phy_unregister_fixup_for_id(const char *bus_id); | |
865 | int phy_unregister_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask); | |
866 | ||
a59a4d19 GC |
867 | int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable); |
868 | int phy_get_eee_err(struct phy_device *phydev); | |
869 | int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data); | |
870 | int phy_ethtool_get_eee(struct phy_device *phydev, struct ethtool_eee *data); | |
42e836eb | 871 | int phy_ethtool_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol); |
4017b4d3 SS |
872 | void phy_ethtool_get_wol(struct phy_device *phydev, |
873 | struct ethtool_wolinfo *wol); | |
9d9a77ce PR |
874 | int phy_ethtool_get_link_ksettings(struct net_device *ndev, |
875 | struct ethtool_link_ksettings *cmd); | |
876 | int phy_ethtool_set_link_ksettings(struct net_device *ndev, | |
877 | const struct ethtool_link_ksettings *cmd); | |
e86a8987 | 878 | int phy_ethtool_nway_reset(struct net_device *ndev); |
a59a4d19 | 879 | |
9b9a8bfc AF |
880 | int __init mdio_bus_init(void); |
881 | void mdio_bus_exit(void); | |
882 | ||
00db8189 | 883 | extern struct bus_type mdio_bus_type; |
c31accd1 JH |
884 | |
885 | /** | |
886 | * module_phy_driver() - Helper macro for registering PHY drivers | |
887 | * @__phy_drivers: array of PHY drivers to register | |
888 | * | |
889 | * Helper macro for PHY drivers which do not do anything special in module | |
890 | * init/exit. Each module may only use this macro once, and calling it | |
891 | * replaces module_init() and module_exit(). | |
892 | */ | |
893 | #define phy_module_driver(__phy_drivers, __count) \ | |
894 | static int __init phy_module_init(void) \ | |
895 | { \ | |
be01da72 | 896 | return phy_drivers_register(__phy_drivers, __count, THIS_MODULE); \ |
c31accd1 JH |
897 | } \ |
898 | module_init(phy_module_init); \ | |
899 | static void __exit phy_module_exit(void) \ | |
900 | { \ | |
901 | phy_drivers_unregister(__phy_drivers, __count); \ | |
902 | } \ | |
903 | module_exit(phy_module_exit) | |
904 | ||
905 | #define module_phy_driver(__phy_drivers) \ | |
906 | phy_module_driver(__phy_drivers, ARRAY_SIZE(__phy_drivers)) | |
907 | ||
00db8189 | 908 | #endif /* __PHY_H */ |