]>
Commit | Line | Data |
---|---|---|
00db8189 AF |
1 | /* |
2 | * include/linux/phy.h | |
3 | * | |
4 | * Framework and drivers for configuring and reading different PHYs | |
5 | * Based on code in sungem_phy.c and gianfar_phy.c | |
6 | * | |
7 | * Author: Andy Fleming | |
8 | * | |
9 | * Copyright (c) 2004 Freescale Semiconductor, Inc. | |
10 | * | |
11 | * This program is free software; you can redistribute it and/or modify it | |
12 | * under the terms of the GNU General Public License as published by the | |
13 | * Free Software Foundation; either version 2 of the License, or (at your | |
14 | * option) any later version. | |
15 | * | |
16 | */ | |
17 | ||
18 | #ifndef __PHY_H | |
19 | #define __PHY_H | |
20 | ||
21 | #include <linux/spinlock.h> | |
13df29f6 MR |
22 | #include <linux/ethtool.h> |
23 | #include <linux/mii.h> | |
24 | #include <linux/timer.h> | |
25 | #include <linux/workqueue.h> | |
8626d3b4 | 26 | #include <linux/mod_devicetable.h> |
00db8189 | 27 | |
60063497 | 28 | #include <linux/atomic.h> |
0ac49527 | 29 | |
00db8189 AF |
30 | #define PHY_BASIC_FEATURES (SUPPORTED_10baseT_Half | \ |
31 | SUPPORTED_10baseT_Full | \ | |
32 | SUPPORTED_100baseT_Half | \ | |
33 | SUPPORTED_100baseT_Full | \ | |
34 | SUPPORTED_Autoneg | \ | |
35 | SUPPORTED_TP | \ | |
36 | SUPPORTED_MII) | |
37 | ||
38 | #define PHY_GBIT_FEATURES (PHY_BASIC_FEATURES | \ | |
39 | SUPPORTED_1000baseT_Half | \ | |
40 | SUPPORTED_1000baseT_Full) | |
41 | ||
c5e38a94 AF |
42 | /* |
43 | * Set phydev->irq to PHY_POLL if interrupts are not supported, | |
00db8189 AF |
44 | * or not desired for this PHY. Set to PHY_IGNORE_INTERRUPT if |
45 | * the attached driver handles the interrupt | |
46 | */ | |
47 | #define PHY_POLL -1 | |
48 | #define PHY_IGNORE_INTERRUPT -2 | |
49 | ||
50 | #define PHY_HAS_INTERRUPT 0x00000001 | |
51 | #define PHY_HAS_MAGICANEG 0x00000002 | |
52 | ||
e8a2b6a4 AF |
53 | /* Interface Mode definitions */ |
54 | typedef enum { | |
4157ef1b | 55 | PHY_INTERFACE_MODE_NA, |
e8a2b6a4 AF |
56 | PHY_INTERFACE_MODE_MII, |
57 | PHY_INTERFACE_MODE_GMII, | |
58 | PHY_INTERFACE_MODE_SGMII, | |
59 | PHY_INTERFACE_MODE_TBI, | |
60 | PHY_INTERFACE_MODE_RMII, | |
61 | PHY_INTERFACE_MODE_RGMII, | |
a999589c | 62 | PHY_INTERFACE_MODE_RGMII_ID, |
7d400a4c KP |
63 | PHY_INTERFACE_MODE_RGMII_RXID, |
64 | PHY_INTERFACE_MODE_RGMII_TXID, | |
4157ef1b SG |
65 | PHY_INTERFACE_MODE_RTBI, |
66 | PHY_INTERFACE_MODE_SMII, | |
e8a2b6a4 AF |
67 | } phy_interface_t; |
68 | ||
00db8189 | 69 | |
e8a2b6a4 | 70 | #define PHY_INIT_TIMEOUT 100000 |
00db8189 AF |
71 | #define PHY_STATE_TIME 1 |
72 | #define PHY_FORCE_TIMEOUT 10 | |
73 | #define PHY_AN_TIMEOUT 10 | |
74 | ||
e8a2b6a4 | 75 | #define PHY_MAX_ADDR 32 |
00db8189 | 76 | |
a4d00f17 | 77 | /* Used when trying to connect to a specific phy (mii bus id:phy device id) */ |
9d9326d3 AF |
78 | #define PHY_ID_FMT "%s:%02x" |
79 | ||
80 | /* | |
81 | * Need to be a little smaller than phydev->dev.bus_id to leave room | |
82 | * for the ":%02x" | |
83 | */ | |
8e401ecc | 84 | #define MII_BUS_ID_SIZE (20 - 3) |
a4d00f17 | 85 | |
abf35df2 JG |
86 | /* Or MII_ADDR_C45 into regnum for read/write on mii_bus to enable the 21 bit |
87 | IEEE 802.3ae clause 45 addressing mode used by 10GIGE phy chips. */ | |
88 | #define MII_ADDR_C45 (1<<30) | |
89 | ||
313162d0 PG |
90 | struct device; |
91 | struct sk_buff; | |
92 | ||
c5e38a94 AF |
93 | /* |
94 | * The Bus class for PHYs. Devices which provide access to | |
95 | * PHYs should register using this structure | |
96 | */ | |
00db8189 AF |
97 | struct mii_bus { |
98 | const char *name; | |
9d9326d3 | 99 | char id[MII_BUS_ID_SIZE]; |
00db8189 AF |
100 | void *priv; |
101 | int (*read)(struct mii_bus *bus, int phy_id, int regnum); | |
102 | int (*write)(struct mii_bus *bus, int phy_id, int regnum, u16 val); | |
103 | int (*reset)(struct mii_bus *bus); | |
104 | ||
c5e38a94 AF |
105 | /* |
106 | * A lock to ensure that only one thing can read/write | |
107 | * the MDIO bus at a time | |
108 | */ | |
35b5f6b1 | 109 | struct mutex mdio_lock; |
00db8189 | 110 | |
18ee49dd | 111 | struct device *parent; |
46abc021 LB |
112 | enum { |
113 | MDIOBUS_ALLOCATED = 1, | |
114 | MDIOBUS_REGISTERED, | |
115 | MDIOBUS_UNREGISTERED, | |
116 | MDIOBUS_RELEASED, | |
117 | } state; | |
118 | struct device dev; | |
00db8189 AF |
119 | |
120 | /* list of all PHYs on bus */ | |
121 | struct phy_device *phy_map[PHY_MAX_ADDR]; | |
122 | ||
c6883996 | 123 | /* PHY addresses to be ignored when probing */ |
f896424c MP |
124 | u32 phy_mask; |
125 | ||
c5e38a94 AF |
126 | /* |
127 | * Pointer to an array of interrupts, each PHY's | |
128 | * interrupt at the index matching its address | |
129 | */ | |
00db8189 AF |
130 | int *irq; |
131 | }; | |
46abc021 | 132 | #define to_mii_bus(d) container_of(d, struct mii_bus, dev) |
00db8189 | 133 | |
eb8a54a7 TT |
134 | struct mii_bus *mdiobus_alloc_size(size_t); |
135 | static inline struct mii_bus *mdiobus_alloc(void) | |
136 | { | |
137 | return mdiobus_alloc_size(0); | |
138 | } | |
139 | ||
2e888103 LB |
140 | int mdiobus_register(struct mii_bus *bus); |
141 | void mdiobus_unregister(struct mii_bus *bus); | |
142 | void mdiobus_free(struct mii_bus *bus); | |
143 | struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr); | |
abf35df2 JG |
144 | int mdiobus_read(struct mii_bus *bus, int addr, u32 regnum); |
145 | int mdiobus_write(struct mii_bus *bus, int addr, u32 regnum, u16 val); | |
2e888103 LB |
146 | |
147 | ||
e8a2b6a4 AF |
148 | #define PHY_INTERRUPT_DISABLED 0x0 |
149 | #define PHY_INTERRUPT_ENABLED 0x80000000 | |
00db8189 AF |
150 | |
151 | /* PHY state machine states: | |
152 | * | |
153 | * DOWN: PHY device and driver are not ready for anything. probe | |
154 | * should be called if and only if the PHY is in this state, | |
155 | * given that the PHY device exists. | |
156 | * - PHY driver probe function will, depending on the PHY, set | |
157 | * the state to STARTING or READY | |
158 | * | |
159 | * STARTING: PHY device is coming up, and the ethernet driver is | |
160 | * not ready. PHY drivers may set this in the probe function. | |
161 | * If they do, they are responsible for making sure the state is | |
162 | * eventually set to indicate whether the PHY is UP or READY, | |
163 | * depending on the state when the PHY is done starting up. | |
164 | * - PHY driver will set the state to READY | |
165 | * - start will set the state to PENDING | |
166 | * | |
167 | * READY: PHY is ready to send and receive packets, but the | |
168 | * controller is not. By default, PHYs which do not implement | |
169 | * probe will be set to this state by phy_probe(). If the PHY | |
170 | * driver knows the PHY is ready, and the PHY state is STARTING, | |
171 | * then it sets this STATE. | |
172 | * - start will set the state to UP | |
173 | * | |
174 | * PENDING: PHY device is coming up, but the ethernet driver is | |
175 | * ready. phy_start will set this state if the PHY state is | |
176 | * STARTING. | |
177 | * - PHY driver will set the state to UP when the PHY is ready | |
178 | * | |
179 | * UP: The PHY and attached device are ready to do work. | |
180 | * Interrupts should be started here. | |
181 | * - timer moves to AN | |
182 | * | |
183 | * AN: The PHY is currently negotiating the link state. Link is | |
184 | * therefore down for now. phy_timer will set this state when it | |
185 | * detects the state is UP. config_aneg will set this state | |
186 | * whenever called with phydev->autoneg set to AUTONEG_ENABLE. | |
187 | * - If autonegotiation finishes, but there's no link, it sets | |
188 | * the state to NOLINK. | |
189 | * - If aneg finishes with link, it sets the state to RUNNING, | |
190 | * and calls adjust_link | |
191 | * - If autonegotiation did not finish after an arbitrary amount | |
192 | * of time, autonegotiation should be tried again if the PHY | |
193 | * supports "magic" autonegotiation (back to AN) | |
194 | * - If it didn't finish, and no magic_aneg, move to FORCING. | |
195 | * | |
196 | * NOLINK: PHY is up, but not currently plugged in. | |
197 | * - If the timer notes that the link comes back, we move to RUNNING | |
198 | * - config_aneg moves to AN | |
199 | * - phy_stop moves to HALTED | |
200 | * | |
201 | * FORCING: PHY is being configured with forced settings | |
202 | * - if link is up, move to RUNNING | |
203 | * - If link is down, we drop to the next highest setting, and | |
204 | * retry (FORCING) after a timeout | |
205 | * - phy_stop moves to HALTED | |
206 | * | |
207 | * RUNNING: PHY is currently up, running, and possibly sending | |
208 | * and/or receiving packets | |
209 | * - timer will set CHANGELINK if we're polling (this ensures the | |
210 | * link state is polled every other cycle of this state machine, | |
211 | * which makes it every other second) | |
212 | * - irq will set CHANGELINK | |
213 | * - config_aneg will set AN | |
214 | * - phy_stop moves to HALTED | |
215 | * | |
216 | * CHANGELINK: PHY experienced a change in link state | |
217 | * - timer moves to RUNNING if link | |
218 | * - timer moves to NOLINK if the link is down | |
219 | * - phy_stop moves to HALTED | |
220 | * | |
221 | * HALTED: PHY is up, but no polling or interrupts are done. Or | |
222 | * PHY is in an error state. | |
223 | * | |
224 | * - phy_start moves to RESUMING | |
225 | * | |
226 | * RESUMING: PHY was halted, but now wants to run again. | |
227 | * - If we are forcing, or aneg is done, timer moves to RUNNING | |
228 | * - If aneg is not done, timer moves to AN | |
229 | * - phy_stop moves to HALTED | |
230 | */ | |
231 | enum phy_state { | |
232 | PHY_DOWN=0, | |
233 | PHY_STARTING, | |
234 | PHY_READY, | |
235 | PHY_PENDING, | |
236 | PHY_UP, | |
237 | PHY_AN, | |
238 | PHY_RUNNING, | |
239 | PHY_NOLINK, | |
240 | PHY_FORCING, | |
241 | PHY_CHANGELINK, | |
242 | PHY_HALTED, | |
243 | PHY_RESUMING | |
244 | }; | |
245 | ||
c1f19b51 | 246 | |
00db8189 AF |
247 | /* phy_device: An instance of a PHY |
248 | * | |
249 | * drv: Pointer to the driver for this PHY instance | |
250 | * bus: Pointer to the bus this PHY is on | |
251 | * dev: driver model device structure for this PHY | |
252 | * phy_id: UID for this device found during discovery | |
253 | * state: state of the PHY for management purposes | |
254 | * dev_flags: Device-specific flags used by the PHY driver. | |
255 | * addr: Bus address of PHY | |
256 | * link_timeout: The number of timer firings to wait before the | |
257 | * giving up on the current attempt at acquiring a link | |
258 | * irq: IRQ number of the PHY's interrupt (-1 if none) | |
259 | * phy_timer: The timer for handling the state machine | |
260 | * phy_queue: A work_queue for the interrupt | |
261 | * attached_dev: The attached enet driver's device instance ptr | |
262 | * adjust_link: Callback for the enet controller to respond to | |
263 | * changes in the link state. | |
264 | * adjust_state: Callback for the enet driver to respond to | |
265 | * changes in the state machine. | |
266 | * | |
267 | * speed, duplex, pause, supported, advertising, and | |
268 | * autoneg are used like in mii_if_info | |
269 | * | |
270 | * interrupts currently only supports enabled or disabled, | |
271 | * but could be changed in the future to support enabling | |
272 | * and disabling specific interrupts | |
273 | * | |
274 | * Contains some infrastructure for polling and interrupt | |
275 | * handling, as well as handling shifts in PHY hardware state | |
276 | */ | |
277 | struct phy_device { | |
278 | /* Information about the PHY type */ | |
279 | /* And management functions */ | |
280 | struct phy_driver *drv; | |
281 | ||
282 | struct mii_bus *bus; | |
283 | ||
284 | struct device dev; | |
285 | ||
286 | u32 phy_id; | |
287 | ||
288 | enum phy_state state; | |
289 | ||
290 | u32 dev_flags; | |
291 | ||
e8a2b6a4 AF |
292 | phy_interface_t interface; |
293 | ||
c6883996 | 294 | /* Bus address of the PHY (0-31) */ |
00db8189 AF |
295 | int addr; |
296 | ||
c5e38a94 AF |
297 | /* |
298 | * forced speed & duplex (no autoneg) | |
00db8189 AF |
299 | * partner speed & duplex & pause (autoneg) |
300 | */ | |
301 | int speed; | |
302 | int duplex; | |
303 | int pause; | |
304 | int asym_pause; | |
305 | ||
306 | /* The most recently read link state */ | |
307 | int link; | |
308 | ||
309 | /* Enabled Interrupts */ | |
310 | u32 interrupts; | |
311 | ||
312 | /* Union of PHY and Attached devices' supported modes */ | |
313 | /* See mii.h for more info */ | |
314 | u32 supported; | |
315 | u32 advertising; | |
316 | ||
317 | int autoneg; | |
318 | ||
319 | int link_timeout; | |
320 | ||
c5e38a94 AF |
321 | /* |
322 | * Interrupt number for this PHY | |
323 | * -1 means no interrupt | |
324 | */ | |
00db8189 AF |
325 | int irq; |
326 | ||
327 | /* private data pointer */ | |
328 | /* For use by PHYs to maintain extra state */ | |
329 | void *priv; | |
330 | ||
331 | /* Interrupt and Polling infrastructure */ | |
332 | struct work_struct phy_queue; | |
a390d1f3 | 333 | struct delayed_work state_queue; |
0ac49527 | 334 | atomic_t irq_disable; |
00db8189 | 335 | |
35b5f6b1 | 336 | struct mutex lock; |
00db8189 AF |
337 | |
338 | struct net_device *attached_dev; | |
339 | ||
340 | void (*adjust_link)(struct net_device *dev); | |
341 | ||
342 | void (*adjust_state)(struct net_device *dev); | |
343 | }; | |
344 | #define to_phy_device(d) container_of(d, struct phy_device, dev) | |
345 | ||
346 | /* struct phy_driver: Driver structure for a particular PHY type | |
347 | * | |
348 | * phy_id: The result of reading the UID registers of this PHY | |
349 | * type, and ANDing them with the phy_id_mask. This driver | |
350 | * only works for PHYs with IDs which match this field | |
351 | * name: The friendly name of this PHY type | |
352 | * phy_id_mask: Defines the important bits of the phy_id | |
353 | * features: A list of features (speed, duplex, etc) supported | |
354 | * by this PHY | |
355 | * flags: A bitfield defining certain other features this PHY | |
356 | * supports (like interrupts) | |
357 | * | |
358 | * The drivers must implement config_aneg and read_status. All | |
359 | * other functions are optional. Note that none of these | |
360 | * functions should be called from interrupt time. The goal is | |
361 | * for the bus read/write functions to be able to block when the | |
362 | * bus transaction is happening, and be freed up by an interrupt | |
363 | * (The MPC85xx has this ability, though it is not currently | |
364 | * supported in the driver). | |
365 | */ | |
366 | struct phy_driver { | |
367 | u32 phy_id; | |
368 | char *name; | |
369 | unsigned int phy_id_mask; | |
370 | u32 features; | |
371 | u32 flags; | |
372 | ||
c5e38a94 AF |
373 | /* |
374 | * Called to initialize the PHY, | |
375 | * including after a reset | |
376 | */ | |
00db8189 AF |
377 | int (*config_init)(struct phy_device *phydev); |
378 | ||
c5e38a94 AF |
379 | /* |
380 | * Called during discovery. Used to set | |
381 | * up device-specific structures, if any | |
382 | */ | |
00db8189 AF |
383 | int (*probe)(struct phy_device *phydev); |
384 | ||
385 | /* PHY Power Management */ | |
386 | int (*suspend)(struct phy_device *phydev); | |
387 | int (*resume)(struct phy_device *phydev); | |
388 | ||
c5e38a94 AF |
389 | /* |
390 | * Configures the advertisement and resets | |
00db8189 AF |
391 | * autonegotiation if phydev->autoneg is on, |
392 | * forces the speed to the current settings in phydev | |
c5e38a94 AF |
393 | * if phydev->autoneg is off |
394 | */ | |
00db8189 AF |
395 | int (*config_aneg)(struct phy_device *phydev); |
396 | ||
397 | /* Determines the negotiated speed and duplex */ | |
398 | int (*read_status)(struct phy_device *phydev); | |
399 | ||
400 | /* Clears any pending interrupts */ | |
401 | int (*ack_interrupt)(struct phy_device *phydev); | |
402 | ||
403 | /* Enables or disables interrupts */ | |
404 | int (*config_intr)(struct phy_device *phydev); | |
405 | ||
a8729eb3 AG |
406 | /* |
407 | * Checks if the PHY generated an interrupt. | |
408 | * For multi-PHY devices with shared PHY interrupt pin | |
409 | */ | |
410 | int (*did_interrupt)(struct phy_device *phydev); | |
411 | ||
00db8189 AF |
412 | /* Clears up any memory if needed */ |
413 | void (*remove)(struct phy_device *phydev); | |
414 | ||
c1f19b51 RC |
415 | /* Handles SIOCSHWTSTAMP ioctl for hardware time stamping. */ |
416 | int (*hwtstamp)(struct phy_device *phydev, struct ifreq *ifr); | |
417 | ||
418 | /* | |
419 | * Requests a Rx timestamp for 'skb'. If the skb is accepted, | |
420 | * the phy driver promises to deliver it using netif_rx() as | |
421 | * soon as a timestamp becomes available. One of the | |
422 | * PTP_CLASS_ values is passed in 'type'. The function must | |
423 | * return true if the skb is accepted for delivery. | |
424 | */ | |
425 | bool (*rxtstamp)(struct phy_device *dev, struct sk_buff *skb, int type); | |
426 | ||
427 | /* | |
428 | * Requests a Tx timestamp for 'skb'. The phy driver promises | |
da92b194 | 429 | * to deliver it using skb_complete_tx_timestamp() as soon as a |
c1f19b51 RC |
430 | * timestamp becomes available. One of the PTP_CLASS_ values |
431 | * is passed in 'type'. | |
432 | */ | |
433 | void (*txtstamp)(struct phy_device *dev, struct sk_buff *skb, int type); | |
434 | ||
00db8189 AF |
435 | struct device_driver driver; |
436 | }; | |
437 | #define to_phy_driver(d) container_of(d, struct phy_driver, driver) | |
438 | ||
f62220d3 AF |
439 | #define PHY_ANY_ID "MATCH ANY PHY" |
440 | #define PHY_ANY_UID 0xffffffff | |
441 | ||
442 | /* A Structure for boards to register fixups with the PHY Lib */ | |
443 | struct phy_fixup { | |
444 | struct list_head list; | |
8e401ecc | 445 | char bus_id[20]; |
f62220d3 AF |
446 | u32 phy_uid; |
447 | u32 phy_uid_mask; | |
448 | int (*run)(struct phy_device *phydev); | |
449 | }; | |
450 | ||
2e888103 LB |
451 | /** |
452 | * phy_read - Convenience function for reading a given PHY register | |
453 | * @phydev: the phy_device struct | |
454 | * @regnum: register number to read | |
455 | * | |
456 | * NOTE: MUST NOT be called from interrupt context, | |
457 | * because the bus read/write functions may wait for an interrupt | |
458 | * to conclude the operation. | |
459 | */ | |
abf35df2 | 460 | static inline int phy_read(struct phy_device *phydev, u32 regnum) |
2e888103 LB |
461 | { |
462 | return mdiobus_read(phydev->bus, phydev->addr, regnum); | |
463 | } | |
464 | ||
465 | /** | |
466 | * phy_write - Convenience function for writing a given PHY register | |
467 | * @phydev: the phy_device struct | |
468 | * @regnum: register number to write | |
469 | * @val: value to write to @regnum | |
470 | * | |
471 | * NOTE: MUST NOT be called from interrupt context, | |
472 | * because the bus read/write functions may wait for an interrupt | |
473 | * to conclude the operation. | |
474 | */ | |
abf35df2 | 475 | static inline int phy_write(struct phy_device *phydev, u32 regnum, u16 val) |
2e888103 LB |
476 | { |
477 | return mdiobus_write(phydev->bus, phydev->addr, regnum, val); | |
478 | } | |
479 | ||
cac1f3c8 | 480 | int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id); |
00db8189 | 481 | struct phy_device* get_phy_device(struct mii_bus *bus, int addr); |
4dea547f | 482 | int phy_device_register(struct phy_device *phy); |
2f5cb434 | 483 | int phy_init_hw(struct phy_device *phydev); |
e1393456 | 484 | struct phy_device * phy_attach(struct net_device *dev, |
f62220d3 | 485 | const char *bus_id, u32 flags, phy_interface_t interface); |
f8f76db1 | 486 | struct phy_device *phy_find_first(struct mii_bus *bus); |
fa94f6d9 GL |
487 | int phy_connect_direct(struct net_device *dev, struct phy_device *phydev, |
488 | void (*handler)(struct net_device *), u32 flags, | |
489 | phy_interface_t interface); | |
f62220d3 | 490 | struct phy_device * phy_connect(struct net_device *dev, const char *bus_id, |
e8a2b6a4 AF |
491 | void (*handler)(struct net_device *), u32 flags, |
492 | phy_interface_t interface); | |
e1393456 AF |
493 | void phy_disconnect(struct phy_device *phydev); |
494 | void phy_detach(struct phy_device *phydev); | |
495 | void phy_start(struct phy_device *phydev); | |
496 | void phy_stop(struct phy_device *phydev); | |
497 | int phy_start_aneg(struct phy_device *phydev); | |
498 | ||
e1393456 | 499 | int phy_stop_interrupts(struct phy_device *phydev); |
00db8189 AF |
500 | |
501 | static inline int phy_read_status(struct phy_device *phydev) { | |
502 | return phydev->drv->read_status(phydev); | |
503 | } | |
504 | ||
00db8189 AF |
505 | int genphy_restart_aneg(struct phy_device *phydev); |
506 | int genphy_config_aneg(struct phy_device *phydev); | |
507 | int genphy_update_link(struct phy_device *phydev); | |
508 | int genphy_read_status(struct phy_device *phydev); | |
0f0ca340 GC |
509 | int genphy_suspend(struct phy_device *phydev); |
510 | int genphy_resume(struct phy_device *phydev); | |
00db8189 AF |
511 | void phy_driver_unregister(struct phy_driver *drv); |
512 | int phy_driver_register(struct phy_driver *new_driver); | |
4f9c85a1 | 513 | void phy_state_machine(struct work_struct *work); |
00db8189 AF |
514 | void phy_start_machine(struct phy_device *phydev, |
515 | void (*handler)(struct net_device *)); | |
516 | void phy_stop_machine(struct phy_device *phydev); | |
517 | int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd); | |
518 | int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd); | |
519 | int phy_mii_ioctl(struct phy_device *phydev, | |
28b04113 | 520 | struct ifreq *ifr, int cmd); |
e1393456 AF |
521 | int phy_start_interrupts(struct phy_device *phydev); |
522 | void phy_print_status(struct phy_device *phydev); | |
6f4a7f41 | 523 | void phy_device_free(struct phy_device *phydev); |
00db8189 | 524 | |
f62220d3 AF |
525 | int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask, |
526 | int (*run)(struct phy_device *)); | |
527 | int phy_register_fixup_for_id(const char *bus_id, | |
528 | int (*run)(struct phy_device *)); | |
529 | int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask, | |
530 | int (*run)(struct phy_device *)); | |
531 | int phy_scan_fixups(struct phy_device *phydev); | |
532 | ||
9b9a8bfc AF |
533 | int __init mdio_bus_init(void); |
534 | void mdio_bus_exit(void); | |
535 | ||
00db8189 | 536 | extern struct bus_type mdio_bus_type; |
00db8189 | 537 | #endif /* __PHY_H */ |