]>
Commit | Line | Data |
---|---|---|
00db8189 | 1 | /* |
00db8189 AF |
2 | * Framework and drivers for configuring and reading different PHYs |
3 | * Based on code in sungem_phy.c and gianfar_phy.c | |
4 | * | |
5 | * Author: Andy Fleming | |
6 | * | |
7 | * Copyright (c) 2004 Freescale Semiconductor, Inc. | |
8 | * | |
9 | * This program is free software; you can redistribute it and/or modify it | |
10 | * under the terms of the GNU General Public License as published by the | |
11 | * Free Software Foundation; either version 2 of the License, or (at your | |
12 | * option) any later version. | |
13 | * | |
14 | */ | |
15 | ||
16 | #ifndef __PHY_H | |
17 | #define __PHY_H | |
18 | ||
2220943a | 19 | #include <linux/compiler.h> |
00db8189 | 20 | #include <linux/spinlock.h> |
13df29f6 | 21 | #include <linux/ethtool.h> |
bac83c65 | 22 | #include <linux/mdio.h> |
13df29f6 | 23 | #include <linux/mii.h> |
3e3aaf64 | 24 | #include <linux/module.h> |
13df29f6 MR |
25 | #include <linux/timer.h> |
26 | #include <linux/workqueue.h> | |
8626d3b4 | 27 | #include <linux/mod_devicetable.h> |
00db8189 | 28 | |
60063497 | 29 | #include <linux/atomic.h> |
0ac49527 | 30 | |
e9fbdf17 | 31 | #define PHY_DEFAULT_FEATURES (SUPPORTED_Autoneg | \ |
00db8189 AF |
32 | SUPPORTED_TP | \ |
33 | SUPPORTED_MII) | |
34 | ||
e9fbdf17 FF |
35 | #define PHY_10BT_FEATURES (SUPPORTED_10baseT_Half | \ |
36 | SUPPORTED_10baseT_Full) | |
37 | ||
38 | #define PHY_100BT_FEATURES (SUPPORTED_100baseT_Half | \ | |
39 | SUPPORTED_100baseT_Full) | |
40 | ||
41 | #define PHY_1000BT_FEATURES (SUPPORTED_1000baseT_Half | \ | |
00db8189 AF |
42 | SUPPORTED_1000baseT_Full) |
43 | ||
e9fbdf17 FF |
44 | #define PHY_BASIC_FEATURES (PHY_10BT_FEATURES | \ |
45 | PHY_100BT_FEATURES | \ | |
46 | PHY_DEFAULT_FEATURES) | |
47 | ||
48 | #define PHY_GBIT_FEATURES (PHY_BASIC_FEATURES | \ | |
49 | PHY_1000BT_FEATURES) | |
50 | ||
51 | ||
c5e38a94 AF |
52 | /* |
53 | * Set phydev->irq to PHY_POLL if interrupts are not supported, | |
00db8189 AF |
54 | * or not desired for this PHY. Set to PHY_IGNORE_INTERRUPT if |
55 | * the attached driver handles the interrupt | |
56 | */ | |
57 | #define PHY_POLL -1 | |
58 | #define PHY_IGNORE_INTERRUPT -2 | |
59 | ||
60 | #define PHY_HAS_INTERRUPT 0x00000001 | |
1b86f702 | 61 | #define PHY_IS_INTERNAL 0x00000002 |
a9049e0c | 62 | #define MDIO_DEVICE_IS_PHY 0x80000000 |
00db8189 | 63 | |
e8a2b6a4 AF |
64 | /* Interface Mode definitions */ |
65 | typedef enum { | |
4157ef1b | 66 | PHY_INTERFACE_MODE_NA, |
735d8a18 | 67 | PHY_INTERFACE_MODE_INTERNAL, |
e8a2b6a4 AF |
68 | PHY_INTERFACE_MODE_MII, |
69 | PHY_INTERFACE_MODE_GMII, | |
70 | PHY_INTERFACE_MODE_SGMII, | |
71 | PHY_INTERFACE_MODE_TBI, | |
2cc70ba4 | 72 | PHY_INTERFACE_MODE_REVMII, |
e8a2b6a4 AF |
73 | PHY_INTERFACE_MODE_RMII, |
74 | PHY_INTERFACE_MODE_RGMII, | |
a999589c | 75 | PHY_INTERFACE_MODE_RGMII_ID, |
7d400a4c KP |
76 | PHY_INTERFACE_MODE_RGMII_RXID, |
77 | PHY_INTERFACE_MODE_RGMII_TXID, | |
4157ef1b SG |
78 | PHY_INTERFACE_MODE_RTBI, |
79 | PHY_INTERFACE_MODE_SMII, | |
898dd0bd | 80 | PHY_INTERFACE_MODE_XGMII, |
fd70f72c | 81 | PHY_INTERFACE_MODE_MOCA, |
b9d12085 | 82 | PHY_INTERFACE_MODE_QSGMII, |
572de608 | 83 | PHY_INTERFACE_MODE_TRGMII, |
55601a88 AL |
84 | PHY_INTERFACE_MODE_1000BASEX, |
85 | PHY_INTERFACE_MODE_2500BASEX, | |
86 | PHY_INTERFACE_MODE_RXAUI, | |
c125ca09 RK |
87 | PHY_INTERFACE_MODE_XAUI, |
88 | /* 10GBASE-KR, XFI, SFI - single lane 10G Serdes */ | |
89 | PHY_INTERFACE_MODE_10GKR, | |
8a2fe56e | 90 | PHY_INTERFACE_MODE_MAX, |
e8a2b6a4 AF |
91 | } phy_interface_t; |
92 | ||
1f9127ca ZB |
93 | /** |
94 | * phy_supported_speeds - return all speeds currently supported by a phy device | |
95 | * @phy: The phy device to return supported speeds of. | |
96 | * @speeds: buffer to store supported speeds in. | |
97 | * @size: size of speeds buffer. | |
98 | * | |
99 | * Description: Returns the number of supported speeds, and | |
100 | * fills the speeds * buffer with the supported speeds. If speeds buffer is | |
101 | * too small to contain * all currently supported speeds, will return as | |
102 | * many speeds as can fit. | |
103 | */ | |
104 | unsigned int phy_supported_speeds(struct phy_device *phy, | |
105 | unsigned int *speeds, | |
106 | unsigned int size); | |
107 | ||
8a2fe56e FF |
108 | /** |
109 | * It maps 'enum phy_interface_t' found in include/linux/phy.h | |
110 | * into the device tree binding of 'phy-mode', so that Ethernet | |
111 | * device driver can get phy interface from device tree. | |
112 | */ | |
113 | static inline const char *phy_modes(phy_interface_t interface) | |
114 | { | |
115 | switch (interface) { | |
116 | case PHY_INTERFACE_MODE_NA: | |
117 | return ""; | |
735d8a18 FF |
118 | case PHY_INTERFACE_MODE_INTERNAL: |
119 | return "internal"; | |
8a2fe56e FF |
120 | case PHY_INTERFACE_MODE_MII: |
121 | return "mii"; | |
122 | case PHY_INTERFACE_MODE_GMII: | |
123 | return "gmii"; | |
124 | case PHY_INTERFACE_MODE_SGMII: | |
125 | return "sgmii"; | |
126 | case PHY_INTERFACE_MODE_TBI: | |
127 | return "tbi"; | |
128 | case PHY_INTERFACE_MODE_REVMII: | |
129 | return "rev-mii"; | |
130 | case PHY_INTERFACE_MODE_RMII: | |
131 | return "rmii"; | |
132 | case PHY_INTERFACE_MODE_RGMII: | |
133 | return "rgmii"; | |
134 | case PHY_INTERFACE_MODE_RGMII_ID: | |
135 | return "rgmii-id"; | |
136 | case PHY_INTERFACE_MODE_RGMII_RXID: | |
137 | return "rgmii-rxid"; | |
138 | case PHY_INTERFACE_MODE_RGMII_TXID: | |
139 | return "rgmii-txid"; | |
140 | case PHY_INTERFACE_MODE_RTBI: | |
141 | return "rtbi"; | |
142 | case PHY_INTERFACE_MODE_SMII: | |
143 | return "smii"; | |
144 | case PHY_INTERFACE_MODE_XGMII: | |
145 | return "xgmii"; | |
fd70f72c FF |
146 | case PHY_INTERFACE_MODE_MOCA: |
147 | return "moca"; | |
b9d12085 TP |
148 | case PHY_INTERFACE_MODE_QSGMII: |
149 | return "qsgmii"; | |
572de608 SW |
150 | case PHY_INTERFACE_MODE_TRGMII: |
151 | return "trgmii"; | |
55601a88 AL |
152 | case PHY_INTERFACE_MODE_1000BASEX: |
153 | return "1000base-x"; | |
154 | case PHY_INTERFACE_MODE_2500BASEX: | |
155 | return "2500base-x"; | |
156 | case PHY_INTERFACE_MODE_RXAUI: | |
157 | return "rxaui"; | |
c125ca09 RK |
158 | case PHY_INTERFACE_MODE_XAUI: |
159 | return "xaui"; | |
160 | case PHY_INTERFACE_MODE_10GKR: | |
161 | return "10gbase-kr"; | |
8a2fe56e FF |
162 | default: |
163 | return "unknown"; | |
164 | } | |
165 | } | |
166 | ||
00db8189 | 167 | |
e8a2b6a4 | 168 | #define PHY_INIT_TIMEOUT 100000 |
00db8189 AF |
169 | #define PHY_STATE_TIME 1 |
170 | #define PHY_FORCE_TIMEOUT 10 | |
171 | #define PHY_AN_TIMEOUT 10 | |
172 | ||
e8a2b6a4 | 173 | #define PHY_MAX_ADDR 32 |
00db8189 | 174 | |
a4d00f17 | 175 | /* Used when trying to connect to a specific phy (mii bus id:phy device id) */ |
9d9326d3 AF |
176 | #define PHY_ID_FMT "%s:%02x" |
177 | ||
4567d686 | 178 | #define MII_BUS_ID_SIZE 61 |
a4d00f17 | 179 | |
abf35df2 JG |
180 | /* Or MII_ADDR_C45 into regnum for read/write on mii_bus to enable the 21 bit |
181 | IEEE 802.3ae clause 45 addressing mode used by 10GIGE phy chips. */ | |
182 | #define MII_ADDR_C45 (1<<30) | |
183 | ||
313162d0 | 184 | struct device; |
9525ae83 | 185 | struct phylink; |
313162d0 PG |
186 | struct sk_buff; |
187 | ||
c5e38a94 AF |
188 | /* |
189 | * The Bus class for PHYs. Devices which provide access to | |
190 | * PHYs should register using this structure | |
191 | */ | |
00db8189 | 192 | struct mii_bus { |
3e3aaf64 | 193 | struct module *owner; |
00db8189 | 194 | const char *name; |
9d9326d3 | 195 | char id[MII_BUS_ID_SIZE]; |
00db8189 | 196 | void *priv; |
ccaa953e AL |
197 | int (*read)(struct mii_bus *bus, int addr, int regnum); |
198 | int (*write)(struct mii_bus *bus, int addr, int regnum, u16 val); | |
00db8189 AF |
199 | int (*reset)(struct mii_bus *bus); |
200 | ||
c5e38a94 AF |
201 | /* |
202 | * A lock to ensure that only one thing can read/write | |
203 | * the MDIO bus at a time | |
204 | */ | |
35b5f6b1 | 205 | struct mutex mdio_lock; |
00db8189 | 206 | |
18ee49dd | 207 | struct device *parent; |
46abc021 LB |
208 | enum { |
209 | MDIOBUS_ALLOCATED = 1, | |
210 | MDIOBUS_REGISTERED, | |
211 | MDIOBUS_UNREGISTERED, | |
212 | MDIOBUS_RELEASED, | |
213 | } state; | |
214 | struct device dev; | |
00db8189 AF |
215 | |
216 | /* list of all PHYs on bus */ | |
7f854420 | 217 | struct mdio_device *mdio_map[PHY_MAX_ADDR]; |
00db8189 | 218 | |
c6883996 | 219 | /* PHY addresses to be ignored when probing */ |
f896424c MP |
220 | u32 phy_mask; |
221 | ||
922f2dd1 FF |
222 | /* PHY addresses to ignore the TA/read failure */ |
223 | u32 phy_ignore_ta_mask; | |
224 | ||
c5e38a94 | 225 | /* |
e7f4dc35 AL |
226 | * An array of interrupts, each PHY's interrupt at the index |
227 | * matching its address | |
c5e38a94 | 228 | */ |
e7f4dc35 | 229 | int irq[PHY_MAX_ADDR]; |
69226896 RQ |
230 | |
231 | /* GPIO reset pulse width in microseconds */ | |
232 | int reset_delay_us; | |
d396e84c SS |
233 | /* RESET GPIO descriptor pointer */ |
234 | struct gpio_desc *reset_gpiod; | |
00db8189 | 235 | }; |
46abc021 | 236 | #define to_mii_bus(d) container_of(d, struct mii_bus, dev) |
00db8189 | 237 | |
eb8a54a7 TT |
238 | struct mii_bus *mdiobus_alloc_size(size_t); |
239 | static inline struct mii_bus *mdiobus_alloc(void) | |
240 | { | |
241 | return mdiobus_alloc_size(0); | |
242 | } | |
243 | ||
3e3aaf64 RK |
244 | int __mdiobus_register(struct mii_bus *bus, struct module *owner); |
245 | #define mdiobus_register(bus) __mdiobus_register(bus, THIS_MODULE) | |
2e888103 LB |
246 | void mdiobus_unregister(struct mii_bus *bus); |
247 | void mdiobus_free(struct mii_bus *bus); | |
6d48f44b GS |
248 | struct mii_bus *devm_mdiobus_alloc_size(struct device *dev, int sizeof_priv); |
249 | static inline struct mii_bus *devm_mdiobus_alloc(struct device *dev) | |
250 | { | |
251 | return devm_mdiobus_alloc_size(dev, 0); | |
252 | } | |
253 | ||
254 | void devm_mdiobus_free(struct device *dev, struct mii_bus *bus); | |
2e888103 | 255 | struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr); |
2e888103 | 256 | |
e8a2b6a4 AF |
257 | #define PHY_INTERRUPT_DISABLED 0x0 |
258 | #define PHY_INTERRUPT_ENABLED 0x80000000 | |
00db8189 AF |
259 | |
260 | /* PHY state machine states: | |
261 | * | |
262 | * DOWN: PHY device and driver are not ready for anything. probe | |
263 | * should be called if and only if the PHY is in this state, | |
264 | * given that the PHY device exists. | |
265 | * - PHY driver probe function will, depending on the PHY, set | |
266 | * the state to STARTING or READY | |
267 | * | |
268 | * STARTING: PHY device is coming up, and the ethernet driver is | |
269 | * not ready. PHY drivers may set this in the probe function. | |
270 | * If they do, they are responsible for making sure the state is | |
271 | * eventually set to indicate whether the PHY is UP or READY, | |
272 | * depending on the state when the PHY is done starting up. | |
273 | * - PHY driver will set the state to READY | |
274 | * - start will set the state to PENDING | |
275 | * | |
276 | * READY: PHY is ready to send and receive packets, but the | |
277 | * controller is not. By default, PHYs which do not implement | |
278 | * probe will be set to this state by phy_probe(). If the PHY | |
279 | * driver knows the PHY is ready, and the PHY state is STARTING, | |
280 | * then it sets this STATE. | |
281 | * - start will set the state to UP | |
282 | * | |
283 | * PENDING: PHY device is coming up, but the ethernet driver is | |
284 | * ready. phy_start will set this state if the PHY state is | |
285 | * STARTING. | |
286 | * - PHY driver will set the state to UP when the PHY is ready | |
287 | * | |
288 | * UP: The PHY and attached device are ready to do work. | |
289 | * Interrupts should be started here. | |
290 | * - timer moves to AN | |
291 | * | |
292 | * AN: The PHY is currently negotiating the link state. Link is | |
293 | * therefore down for now. phy_timer will set this state when it | |
294 | * detects the state is UP. config_aneg will set this state | |
295 | * whenever called with phydev->autoneg set to AUTONEG_ENABLE. | |
296 | * - If autonegotiation finishes, but there's no link, it sets | |
297 | * the state to NOLINK. | |
298 | * - If aneg finishes with link, it sets the state to RUNNING, | |
299 | * and calls adjust_link | |
300 | * - If autonegotiation did not finish after an arbitrary amount | |
301 | * of time, autonegotiation should be tried again if the PHY | |
302 | * supports "magic" autonegotiation (back to AN) | |
303 | * - If it didn't finish, and no magic_aneg, move to FORCING. | |
304 | * | |
305 | * NOLINK: PHY is up, but not currently plugged in. | |
306 | * - If the timer notes that the link comes back, we move to RUNNING | |
307 | * - config_aneg moves to AN | |
308 | * - phy_stop moves to HALTED | |
309 | * | |
310 | * FORCING: PHY is being configured with forced settings | |
311 | * - if link is up, move to RUNNING | |
312 | * - If link is down, we drop to the next highest setting, and | |
313 | * retry (FORCING) after a timeout | |
314 | * - phy_stop moves to HALTED | |
315 | * | |
316 | * RUNNING: PHY is currently up, running, and possibly sending | |
317 | * and/or receiving packets | |
318 | * - timer will set CHANGELINK if we're polling (this ensures the | |
319 | * link state is polled every other cycle of this state machine, | |
320 | * which makes it every other second) | |
321 | * - irq will set CHANGELINK | |
322 | * - config_aneg will set AN | |
323 | * - phy_stop moves to HALTED | |
324 | * | |
325 | * CHANGELINK: PHY experienced a change in link state | |
326 | * - timer moves to RUNNING if link | |
327 | * - timer moves to NOLINK if the link is down | |
328 | * - phy_stop moves to HALTED | |
329 | * | |
330 | * HALTED: PHY is up, but no polling or interrupts are done. Or | |
331 | * PHY is in an error state. | |
332 | * | |
333 | * - phy_start moves to RESUMING | |
334 | * | |
335 | * RESUMING: PHY was halted, but now wants to run again. | |
336 | * - If we are forcing, or aneg is done, timer moves to RUNNING | |
337 | * - If aneg is not done, timer moves to AN | |
338 | * - phy_stop moves to HALTED | |
339 | */ | |
340 | enum phy_state { | |
4017b4d3 | 341 | PHY_DOWN = 0, |
00db8189 AF |
342 | PHY_STARTING, |
343 | PHY_READY, | |
344 | PHY_PENDING, | |
345 | PHY_UP, | |
346 | PHY_AN, | |
347 | PHY_RUNNING, | |
348 | PHY_NOLINK, | |
349 | PHY_FORCING, | |
350 | PHY_CHANGELINK, | |
351 | PHY_HALTED, | |
352 | PHY_RESUMING | |
353 | }; | |
354 | ||
ac28b9f8 DD |
355 | /** |
356 | * struct phy_c45_device_ids - 802.3-c45 Device Identifiers | |
357 | * @devices_in_package: Bit vector of devices present. | |
358 | * @device_ids: The device identifer for each present device. | |
359 | */ | |
360 | struct phy_c45_device_ids { | |
361 | u32 devices_in_package; | |
362 | u32 device_ids[8]; | |
363 | }; | |
c1f19b51 | 364 | |
00db8189 AF |
365 | /* phy_device: An instance of a PHY |
366 | * | |
367 | * drv: Pointer to the driver for this PHY instance | |
00db8189 | 368 | * phy_id: UID for this device found during discovery |
ac28b9f8 DD |
369 | * c45_ids: 802.3-c45 Device Identifers if is_c45. |
370 | * is_c45: Set to true if this phy uses clause 45 addressing. | |
4284b6a5 | 371 | * is_internal: Set to true if this phy is internal to a MAC. |
5a11dd7d | 372 | * is_pseudo_fixed_link: Set to true if this phy is an Ethernet switch, etc. |
aae88261 | 373 | * has_fixups: Set to true if this phy has fixups/quirks. |
8a477a6f | 374 | * suspended: Set to true if this phy has been suspended successfully. |
a3995460 | 375 | * sysfs_links: Internal boolean tracking sysfs symbolic links setup/removal. |
f0f9b4ed | 376 | * loopback_enabled: Set true if this phy has been loopbacked successfully. |
00db8189 AF |
377 | * state: state of the PHY for management purposes |
378 | * dev_flags: Device-specific flags used by the PHY driver. | |
00db8189 AF |
379 | * link_timeout: The number of timer firings to wait before the |
380 | * giving up on the current attempt at acquiring a link | |
381 | * irq: IRQ number of the PHY's interrupt (-1 if none) | |
382 | * phy_timer: The timer for handling the state machine | |
664fcf12 | 383 | * phy_queue: A work_queue for the phy_mac_interrupt |
00db8189 AF |
384 | * attached_dev: The attached enet driver's device instance ptr |
385 | * adjust_link: Callback for the enet controller to respond to | |
386 | * changes in the link state. | |
00db8189 | 387 | * |
114002bc FF |
388 | * speed, duplex, pause, supported, advertising, lp_advertising, |
389 | * and autoneg are used like in mii_if_info | |
00db8189 AF |
390 | * |
391 | * interrupts currently only supports enabled or disabled, | |
392 | * but could be changed in the future to support enabling | |
393 | * and disabling specific interrupts | |
394 | * | |
395 | * Contains some infrastructure for polling and interrupt | |
396 | * handling, as well as handling shifts in PHY hardware state | |
397 | */ | |
398 | struct phy_device { | |
e5a03bfd AL |
399 | struct mdio_device mdio; |
400 | ||
00db8189 AF |
401 | /* Information about the PHY type */ |
402 | /* And management functions */ | |
403 | struct phy_driver *drv; | |
404 | ||
00db8189 AF |
405 | u32 phy_id; |
406 | ||
ac28b9f8 DD |
407 | struct phy_c45_device_ids c45_ids; |
408 | bool is_c45; | |
4284b6a5 | 409 | bool is_internal; |
5a11dd7d | 410 | bool is_pseudo_fixed_link; |
b0ae009f | 411 | bool has_fixups; |
8a477a6f | 412 | bool suspended; |
a3995460 | 413 | bool sysfs_links; |
f0f9b4ed | 414 | bool loopback_enabled; |
ac28b9f8 | 415 | |
00db8189 AF |
416 | enum phy_state state; |
417 | ||
418 | u32 dev_flags; | |
419 | ||
e8a2b6a4 AF |
420 | phy_interface_t interface; |
421 | ||
c5e38a94 AF |
422 | /* |
423 | * forced speed & duplex (no autoneg) | |
00db8189 AF |
424 | * partner speed & duplex & pause (autoneg) |
425 | */ | |
426 | int speed; | |
427 | int duplex; | |
428 | int pause; | |
429 | int asym_pause; | |
430 | ||
431 | /* The most recently read link state */ | |
432 | int link; | |
433 | ||
434 | /* Enabled Interrupts */ | |
435 | u32 interrupts; | |
436 | ||
437 | /* Union of PHY and Attached devices' supported modes */ | |
438 | /* See mii.h for more info */ | |
439 | u32 supported; | |
440 | u32 advertising; | |
114002bc | 441 | u32 lp_advertising; |
00db8189 | 442 | |
d853d145 | 443 | /* Energy efficient ethernet modes which should be prohibited */ |
444 | u32 eee_broken_modes; | |
445 | ||
00db8189 AF |
446 | int autoneg; |
447 | ||
448 | int link_timeout; | |
449 | ||
2e0bc452 ZB |
450 | #ifdef CONFIG_LED_TRIGGER_PHY |
451 | struct phy_led_trigger *phy_led_triggers; | |
452 | unsigned int phy_num_led_triggers; | |
453 | struct phy_led_trigger *last_triggered; | |
454 | #endif | |
455 | ||
c5e38a94 AF |
456 | /* |
457 | * Interrupt number for this PHY | |
458 | * -1 means no interrupt | |
459 | */ | |
00db8189 AF |
460 | int irq; |
461 | ||
462 | /* private data pointer */ | |
463 | /* For use by PHYs to maintain extra state */ | |
464 | void *priv; | |
465 | ||
466 | /* Interrupt and Polling infrastructure */ | |
467 | struct work_struct phy_queue; | |
a390d1f3 | 468 | struct delayed_work state_queue; |
0ac49527 | 469 | atomic_t irq_disable; |
00db8189 | 470 | |
35b5f6b1 | 471 | struct mutex lock; |
00db8189 | 472 | |
9525ae83 | 473 | struct phylink *phylink; |
00db8189 AF |
474 | struct net_device *attached_dev; |
475 | ||
634ec36c | 476 | u8 mdix; |
f4ed2fe3 | 477 | u8 mdix_ctrl; |
634ec36c | 478 | |
a81497be | 479 | void (*phy_link_change)(struct phy_device *, bool up, bool do_carrier); |
00db8189 | 480 | void (*adjust_link)(struct net_device *dev); |
00db8189 | 481 | }; |
e5a03bfd AL |
482 | #define to_phy_device(d) container_of(to_mdio_device(d), \ |
483 | struct phy_device, mdio) | |
00db8189 AF |
484 | |
485 | /* struct phy_driver: Driver structure for a particular PHY type | |
486 | * | |
a9049e0c | 487 | * driver_data: static driver data |
00db8189 AF |
488 | * phy_id: The result of reading the UID registers of this PHY |
489 | * type, and ANDing them with the phy_id_mask. This driver | |
490 | * only works for PHYs with IDs which match this field | |
491 | * name: The friendly name of this PHY type | |
492 | * phy_id_mask: Defines the important bits of the phy_id | |
493 | * features: A list of features (speed, duplex, etc) supported | |
494 | * by this PHY | |
495 | * flags: A bitfield defining certain other features this PHY | |
496 | * supports (like interrupts) | |
497 | * | |
498 | * The drivers must implement config_aneg and read_status. All | |
499 | * other functions are optional. Note that none of these | |
500 | * functions should be called from interrupt time. The goal is | |
501 | * for the bus read/write functions to be able to block when the | |
502 | * bus transaction is happening, and be freed up by an interrupt | |
503 | * (The MPC85xx has this ability, though it is not currently | |
504 | * supported in the driver). | |
505 | */ | |
506 | struct phy_driver { | |
a9049e0c | 507 | struct mdio_driver_common mdiodrv; |
00db8189 AF |
508 | u32 phy_id; |
509 | char *name; | |
510 | unsigned int phy_id_mask; | |
511 | u32 features; | |
512 | u32 flags; | |
860f6e9e | 513 | const void *driver_data; |
00db8189 | 514 | |
c5e38a94 | 515 | /* |
9df81dd7 FF |
516 | * Called to issue a PHY software reset |
517 | */ | |
518 | int (*soft_reset)(struct phy_device *phydev); | |
519 | ||
520 | /* | |
c5e38a94 AF |
521 | * Called to initialize the PHY, |
522 | * including after a reset | |
523 | */ | |
00db8189 AF |
524 | int (*config_init)(struct phy_device *phydev); |
525 | ||
c5e38a94 AF |
526 | /* |
527 | * Called during discovery. Used to set | |
528 | * up device-specific structures, if any | |
529 | */ | |
00db8189 AF |
530 | int (*probe)(struct phy_device *phydev); |
531 | ||
532 | /* PHY Power Management */ | |
533 | int (*suspend)(struct phy_device *phydev); | |
534 | int (*resume)(struct phy_device *phydev); | |
535 | ||
c5e38a94 AF |
536 | /* |
537 | * Configures the advertisement and resets | |
00db8189 AF |
538 | * autonegotiation if phydev->autoneg is on, |
539 | * forces the speed to the current settings in phydev | |
c5e38a94 AF |
540 | * if phydev->autoneg is off |
541 | */ | |
00db8189 AF |
542 | int (*config_aneg)(struct phy_device *phydev); |
543 | ||
76a423a3 FF |
544 | /* Determines the auto negotiation result */ |
545 | int (*aneg_done)(struct phy_device *phydev); | |
546 | ||
00db8189 AF |
547 | /* Determines the negotiated speed and duplex */ |
548 | int (*read_status)(struct phy_device *phydev); | |
549 | ||
550 | /* Clears any pending interrupts */ | |
551 | int (*ack_interrupt)(struct phy_device *phydev); | |
552 | ||
553 | /* Enables or disables interrupts */ | |
554 | int (*config_intr)(struct phy_device *phydev); | |
555 | ||
a8729eb3 AG |
556 | /* |
557 | * Checks if the PHY generated an interrupt. | |
558 | * For multi-PHY devices with shared PHY interrupt pin | |
559 | */ | |
560 | int (*did_interrupt)(struct phy_device *phydev); | |
561 | ||
00db8189 AF |
562 | /* Clears up any memory if needed */ |
563 | void (*remove)(struct phy_device *phydev); | |
564 | ||
a30e2c18 DD |
565 | /* Returns true if this is a suitable driver for the given |
566 | * phydev. If NULL, matching is based on phy_id and | |
567 | * phy_id_mask. | |
568 | */ | |
569 | int (*match_phy_device)(struct phy_device *phydev); | |
570 | ||
c8f3a8c3 RC |
571 | /* Handles ethtool queries for hardware time stamping. */ |
572 | int (*ts_info)(struct phy_device *phydev, struct ethtool_ts_info *ti); | |
573 | ||
c1f19b51 RC |
574 | /* Handles SIOCSHWTSTAMP ioctl for hardware time stamping. */ |
575 | int (*hwtstamp)(struct phy_device *phydev, struct ifreq *ifr); | |
576 | ||
577 | /* | |
578 | * Requests a Rx timestamp for 'skb'. If the skb is accepted, | |
579 | * the phy driver promises to deliver it using netif_rx() as | |
580 | * soon as a timestamp becomes available. One of the | |
581 | * PTP_CLASS_ values is passed in 'type'. The function must | |
582 | * return true if the skb is accepted for delivery. | |
583 | */ | |
584 | bool (*rxtstamp)(struct phy_device *dev, struct sk_buff *skb, int type); | |
585 | ||
586 | /* | |
587 | * Requests a Tx timestamp for 'skb'. The phy driver promises | |
da92b194 | 588 | * to deliver it using skb_complete_tx_timestamp() as soon as a |
c1f19b51 RC |
589 | * timestamp becomes available. One of the PTP_CLASS_ values |
590 | * is passed in 'type'. | |
591 | */ | |
592 | void (*txtstamp)(struct phy_device *dev, struct sk_buff *skb, int type); | |
593 | ||
42e836eb MS |
594 | /* Some devices (e.g. qnap TS-119P II) require PHY register changes to |
595 | * enable Wake on LAN, so set_wol is provided to be called in the | |
596 | * ethernet driver's set_wol function. */ | |
597 | int (*set_wol)(struct phy_device *dev, struct ethtool_wolinfo *wol); | |
598 | ||
599 | /* See set_wol, but for checking whether Wake on LAN is enabled. */ | |
600 | void (*get_wol)(struct phy_device *dev, struct ethtool_wolinfo *wol); | |
601 | ||
2b8f2a28 DM |
602 | /* |
603 | * Called to inform a PHY device driver when the core is about to | |
604 | * change the link state. This callback is supposed to be used as | |
605 | * fixup hook for drivers that need to take action when the link | |
606 | * state changes. Drivers are by no means allowed to mess with the | |
607 | * PHY device structure in their implementations. | |
608 | */ | |
609 | void (*link_change_notify)(struct phy_device *dev); | |
610 | ||
1ee6b9bc RK |
611 | /* |
612 | * Phy specific driver override for reading a MMD register. | |
613 | * This function is optional for PHY specific drivers. When | |
614 | * not provided, the default MMD read function will be used | |
615 | * by phy_read_mmd(), which will use either a direct read for | |
616 | * Clause 45 PHYs or an indirect read for Clause 22 PHYs. | |
617 | * devnum is the MMD device number within the PHY device, | |
618 | * regnum is the register within the selected MMD device. | |
619 | */ | |
620 | int (*read_mmd)(struct phy_device *dev, int devnum, u16 regnum); | |
621 | ||
622 | /* | |
623 | * Phy specific driver override for writing a MMD register. | |
624 | * This function is optional for PHY specific drivers. When | |
625 | * not provided, the default MMD write function will be used | |
626 | * by phy_write_mmd(), which will use either a direct write for | |
627 | * Clause 45 PHYs, or an indirect write for Clause 22 PHYs. | |
628 | * devnum is the MMD device number within the PHY device, | |
629 | * regnum is the register within the selected MMD device. | |
630 | * val is the value to be written. | |
631 | */ | |
632 | int (*write_mmd)(struct phy_device *dev, int devnum, u16 regnum, | |
633 | u16 val); | |
634 | ||
2f438366 ES |
635 | /* Get the size and type of the eeprom contained within a plug-in |
636 | * module */ | |
637 | int (*module_info)(struct phy_device *dev, | |
638 | struct ethtool_modinfo *modinfo); | |
639 | ||
640 | /* Get the eeprom information from the plug-in module */ | |
641 | int (*module_eeprom)(struct phy_device *dev, | |
642 | struct ethtool_eeprom *ee, u8 *data); | |
643 | ||
f3a40945 AL |
644 | /* Get statistics from the phy using ethtool */ |
645 | int (*get_sset_count)(struct phy_device *dev); | |
646 | void (*get_strings)(struct phy_device *dev, u8 *data); | |
647 | void (*get_stats)(struct phy_device *dev, | |
648 | struct ethtool_stats *stats, u64 *data); | |
968ad9da RL |
649 | |
650 | /* Get and Set PHY tunables */ | |
651 | int (*get_tunable)(struct phy_device *dev, | |
652 | struct ethtool_tunable *tuna, void *data); | |
653 | int (*set_tunable)(struct phy_device *dev, | |
654 | struct ethtool_tunable *tuna, | |
655 | const void *data); | |
f0f9b4ed | 656 | int (*set_loopback)(struct phy_device *dev, bool enable); |
00db8189 | 657 | }; |
a9049e0c AL |
658 | #define to_phy_driver(d) container_of(to_mdio_common_driver(d), \ |
659 | struct phy_driver, mdiodrv) | |
00db8189 | 660 | |
f62220d3 AF |
661 | #define PHY_ANY_ID "MATCH ANY PHY" |
662 | #define PHY_ANY_UID 0xffffffff | |
663 | ||
664 | /* A Structure for boards to register fixups with the PHY Lib */ | |
665 | struct phy_fixup { | |
666 | struct list_head list; | |
4567d686 | 667 | char bus_id[MII_BUS_ID_SIZE + 3]; |
f62220d3 AF |
668 | u32 phy_uid; |
669 | u32 phy_uid_mask; | |
670 | int (*run)(struct phy_device *phydev); | |
671 | }; | |
672 | ||
da4625ac RK |
673 | const char *phy_speed_to_str(int speed); |
674 | const char *phy_duplex_to_str(unsigned int duplex); | |
675 | ||
0ccb4fc6 RK |
676 | /* A structure for mapping a particular speed and duplex |
677 | * combination to a particular SUPPORTED and ADVERTISED value | |
678 | */ | |
679 | struct phy_setting { | |
680 | u32 speed; | |
681 | u8 duplex; | |
682 | u8 bit; | |
683 | }; | |
684 | ||
685 | const struct phy_setting * | |
686 | phy_lookup_setting(int speed, int duplex, const unsigned long *mask, | |
687 | size_t maxbit, bool exact); | |
688 | size_t phy_speeds(unsigned int *speeds, size_t size, | |
689 | unsigned long *mask, size_t maxbit); | |
690 | ||
efabdfb9 AF |
691 | /** |
692 | * phy_read_mmd - Convenience function for reading a register | |
693 | * from an MMD on a given PHY. | |
694 | * @phydev: The phy_device struct | |
695 | * @devad: The MMD to read from | |
696 | * @regnum: The register on the MMD to read | |
697 | * | |
698 | * Same rules as for phy_read(); | |
699 | */ | |
9860118b | 700 | int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum); |
efabdfb9 | 701 | |
2e888103 LB |
702 | /** |
703 | * phy_read - Convenience function for reading a given PHY register | |
704 | * @phydev: the phy_device struct | |
705 | * @regnum: register number to read | |
706 | * | |
707 | * NOTE: MUST NOT be called from interrupt context, | |
708 | * because the bus read/write functions may wait for an interrupt | |
709 | * to conclude the operation. | |
710 | */ | |
abf35df2 | 711 | static inline int phy_read(struct phy_device *phydev, u32 regnum) |
2e888103 | 712 | { |
e5a03bfd | 713 | return mdiobus_read(phydev->mdio.bus, phydev->mdio.addr, regnum); |
2e888103 LB |
714 | } |
715 | ||
716 | /** | |
717 | * phy_write - Convenience function for writing a given PHY register | |
718 | * @phydev: the phy_device struct | |
719 | * @regnum: register number to write | |
720 | * @val: value to write to @regnum | |
721 | * | |
722 | * NOTE: MUST NOT be called from interrupt context, | |
723 | * because the bus read/write functions may wait for an interrupt | |
724 | * to conclude the operation. | |
725 | */ | |
abf35df2 | 726 | static inline int phy_write(struct phy_device *phydev, u32 regnum, u16 val) |
2e888103 | 727 | { |
e5a03bfd | 728 | return mdiobus_write(phydev->mdio.bus, phydev->mdio.addr, regnum, val); |
2e888103 LB |
729 | } |
730 | ||
2c7b4921 FF |
731 | /** |
732 | * phy_interrupt_is_valid - Convenience function for testing a given PHY irq | |
733 | * @phydev: the phy_device struct | |
734 | * | |
735 | * NOTE: must be kept in sync with addition/removal of PHY_POLL and | |
736 | * PHY_IGNORE_INTERRUPT | |
737 | */ | |
738 | static inline bool phy_interrupt_is_valid(struct phy_device *phydev) | |
739 | { | |
740 | return phydev->irq != PHY_POLL && phydev->irq != PHY_IGNORE_INTERRUPT; | |
741 | } | |
742 | ||
4284b6a5 FF |
743 | /** |
744 | * phy_is_internal - Convenience function for testing if a PHY is internal | |
745 | * @phydev: the phy_device struct | |
746 | */ | |
747 | static inline bool phy_is_internal(struct phy_device *phydev) | |
748 | { | |
749 | return phydev->is_internal; | |
750 | } | |
751 | ||
32d0f783 IS |
752 | /** |
753 | * phy_interface_mode_is_rgmii - Convenience function for testing if a | |
754 | * PHY interface mode is RGMII (all variants) | |
755 | * @mode: the phy_interface_t enum | |
756 | */ | |
757 | static inline bool phy_interface_mode_is_rgmii(phy_interface_t mode) | |
758 | { | |
759 | return mode >= PHY_INTERFACE_MODE_RGMII && | |
760 | mode <= PHY_INTERFACE_MODE_RGMII_TXID; | |
761 | }; | |
762 | ||
e463d88c FF |
763 | /** |
764 | * phy_interface_is_rgmii - Convenience function for testing if a PHY interface | |
765 | * is RGMII (all variants) | |
766 | * @phydev: the phy_device struct | |
767 | */ | |
768 | static inline bool phy_interface_is_rgmii(struct phy_device *phydev) | |
769 | { | |
32d0f783 | 770 | return phy_interface_mode_is_rgmii(phydev->interface); |
5a11dd7d FF |
771 | }; |
772 | ||
773 | /* | |
774 | * phy_is_pseudo_fixed_link - Convenience function for testing if this | |
775 | * PHY is the CPU port facing side of an Ethernet switch, or similar. | |
776 | * @phydev: the phy_device struct | |
777 | */ | |
778 | static inline bool phy_is_pseudo_fixed_link(struct phy_device *phydev) | |
779 | { | |
780 | return phydev->is_pseudo_fixed_link; | |
e463d88c FF |
781 | } |
782 | ||
efabdfb9 AF |
783 | /** |
784 | * phy_write_mmd - Convenience function for writing a register | |
785 | * on an MMD on a given PHY. | |
786 | * @phydev: The phy_device struct | |
787 | * @devad: The MMD to read from | |
788 | * @regnum: The register on the MMD to read | |
789 | * @val: value to write to @regnum | |
790 | * | |
791 | * Same rules as for phy_write(); | |
792 | */ | |
9860118b | 793 | int phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val); |
efabdfb9 | 794 | |
ac28b9f8 | 795 | struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id, |
4017b4d3 SS |
796 | bool is_c45, |
797 | struct phy_c45_device_ids *c45_ids); | |
90eff909 | 798 | #if IS_ENABLED(CONFIG_PHYLIB) |
ac28b9f8 | 799 | struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45); |
4dea547f | 800 | int phy_device_register(struct phy_device *phy); |
90eff909 FF |
801 | void phy_device_free(struct phy_device *phydev); |
802 | #else | |
803 | static inline | |
804 | struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45) | |
805 | { | |
806 | return NULL; | |
807 | } | |
808 | ||
809 | static inline int phy_device_register(struct phy_device *phy) | |
810 | { | |
811 | return 0; | |
812 | } | |
813 | ||
814 | static inline void phy_device_free(struct phy_device *phydev) { } | |
815 | #endif /* CONFIG_PHYLIB */ | |
38737e49 | 816 | void phy_device_remove(struct phy_device *phydev); |
2f5cb434 | 817 | int phy_init_hw(struct phy_device *phydev); |
481b5d93 SH |
818 | int phy_suspend(struct phy_device *phydev); |
819 | int phy_resume(struct phy_device *phydev); | |
f0f9b4ed | 820 | int phy_loopback(struct phy_device *phydev, bool enable); |
4017b4d3 SS |
821 | struct phy_device *phy_attach(struct net_device *dev, const char *bus_id, |
822 | phy_interface_t interface); | |
f8f76db1 | 823 | struct phy_device *phy_find_first(struct mii_bus *bus); |
257184d7 AF |
824 | int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, |
825 | u32 flags, phy_interface_t interface); | |
fa94f6d9 | 826 | int phy_connect_direct(struct net_device *dev, struct phy_device *phydev, |
4017b4d3 SS |
827 | void (*handler)(struct net_device *), |
828 | phy_interface_t interface); | |
829 | struct phy_device *phy_connect(struct net_device *dev, const char *bus_id, | |
830 | void (*handler)(struct net_device *), | |
831 | phy_interface_t interface); | |
e1393456 AF |
832 | void phy_disconnect(struct phy_device *phydev); |
833 | void phy_detach(struct phy_device *phydev); | |
834 | void phy_start(struct phy_device *phydev); | |
835 | void phy_stop(struct phy_device *phydev); | |
836 | int phy_start_aneg(struct phy_device *phydev); | |
372788f9 | 837 | int phy_aneg_done(struct phy_device *phydev); |
e1393456 | 838 | |
e1393456 | 839 | int phy_stop_interrupts(struct phy_device *phydev); |
002ba705 | 840 | int phy_restart_aneg(struct phy_device *phydev); |
00db8189 | 841 | |
4017b4d3 SS |
842 | static inline int phy_read_status(struct phy_device *phydev) |
843 | { | |
25149ef9 FF |
844 | if (!phydev->drv) |
845 | return -EIO; | |
846 | ||
00db8189 AF |
847 | return phydev->drv->read_status(phydev); |
848 | } | |
849 | ||
72ba48be | 850 | #define phydev_err(_phydev, format, args...) \ |
e5a03bfd | 851 | dev_err(&_phydev->mdio.dev, format, ##args) |
72ba48be AL |
852 | |
853 | #define phydev_dbg(_phydev, format, args...) \ | |
2eaa38d9 | 854 | dev_dbg(&_phydev->mdio.dev, format, ##args) |
72ba48be | 855 | |
84eff6d1 AL |
856 | static inline const char *phydev_name(const struct phy_device *phydev) |
857 | { | |
e5a03bfd | 858 | return dev_name(&phydev->mdio.dev); |
84eff6d1 AL |
859 | } |
860 | ||
2220943a AL |
861 | void phy_attached_print(struct phy_device *phydev, const char *fmt, ...) |
862 | __printf(2, 3); | |
863 | void phy_attached_info(struct phy_device *phydev); | |
5acde34a RK |
864 | |
865 | /* Clause 22 PHY */ | |
af6b6967 | 866 | int genphy_config_init(struct phy_device *phydev); |
3fb69bca | 867 | int genphy_setup_forced(struct phy_device *phydev); |
00db8189 AF |
868 | int genphy_restart_aneg(struct phy_device *phydev); |
869 | int genphy_config_aneg(struct phy_device *phydev); | |
a9fa6e6a | 870 | int genphy_aneg_done(struct phy_device *phydev); |
00db8189 AF |
871 | int genphy_update_link(struct phy_device *phydev); |
872 | int genphy_read_status(struct phy_device *phydev); | |
0f0ca340 GC |
873 | int genphy_suspend(struct phy_device *phydev); |
874 | int genphy_resume(struct phy_device *phydev); | |
f0f9b4ed | 875 | int genphy_loopback(struct phy_device *phydev, bool enable); |
797ac071 | 876 | int genphy_soft_reset(struct phy_device *phydev); |
0878fff1 FF |
877 | static inline int genphy_no_soft_reset(struct phy_device *phydev) |
878 | { | |
879 | return 0; | |
880 | } | |
5acde34a RK |
881 | |
882 | /* Clause 45 PHY */ | |
883 | int genphy_c45_restart_aneg(struct phy_device *phydev); | |
884 | int genphy_c45_aneg_done(struct phy_device *phydev); | |
885 | int genphy_c45_read_link(struct phy_device *phydev, u32 mmd_mask); | |
886 | int genphy_c45_read_lpa(struct phy_device *phydev); | |
887 | int genphy_c45_read_pma(struct phy_device *phydev); | |
888 | int genphy_c45_pma_setup_forced(struct phy_device *phydev); | |
889 | int genphy_c45_an_disable_aneg(struct phy_device *phydev); | |
890 | ||
00db8189 | 891 | void phy_driver_unregister(struct phy_driver *drv); |
d5bf9071 | 892 | void phy_drivers_unregister(struct phy_driver *drv, int n); |
be01da72 AL |
893 | int phy_driver_register(struct phy_driver *new_driver, struct module *owner); |
894 | int phy_drivers_register(struct phy_driver *new_driver, int n, | |
895 | struct module *owner); | |
4f9c85a1 | 896 | void phy_state_machine(struct work_struct *work); |
664fcf12 AL |
897 | void phy_change(struct phy_device *phydev); |
898 | void phy_change_work(struct work_struct *work); | |
5ea94e76 | 899 | void phy_mac_interrupt(struct phy_device *phydev, int new_link); |
29935aeb | 900 | void phy_start_machine(struct phy_device *phydev); |
00db8189 | 901 | void phy_stop_machine(struct phy_device *phydev); |
f555f34f | 902 | void phy_trigger_machine(struct phy_device *phydev, bool sync); |
00db8189 | 903 | int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd); |
5514174f | 904 | void phy_ethtool_ksettings_get(struct phy_device *phydev, |
905 | struct ethtool_link_ksettings *cmd); | |
2d55173e PR |
906 | int phy_ethtool_ksettings_set(struct phy_device *phydev, |
907 | const struct ethtool_link_ksettings *cmd); | |
4017b4d3 | 908 | int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd); |
e1393456 AF |
909 | int phy_start_interrupts(struct phy_device *phydev); |
910 | void phy_print_status(struct phy_device *phydev); | |
f3a6bd39 | 911 | int phy_set_max_speed(struct phy_device *phydev, u32 max_speed); |
00db8189 | 912 | |
f62220d3 | 913 | int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask, |
4017b4d3 | 914 | int (*run)(struct phy_device *)); |
f62220d3 | 915 | int phy_register_fixup_for_id(const char *bus_id, |
4017b4d3 | 916 | int (*run)(struct phy_device *)); |
f62220d3 | 917 | int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask, |
4017b4d3 | 918 | int (*run)(struct phy_device *)); |
f62220d3 | 919 | |
f38e7a32 WH |
920 | int phy_unregister_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask); |
921 | int phy_unregister_fixup_for_id(const char *bus_id); | |
922 | int phy_unregister_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask); | |
923 | ||
a59a4d19 GC |
924 | int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable); |
925 | int phy_get_eee_err(struct phy_device *phydev); | |
926 | int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data); | |
927 | int phy_ethtool_get_eee(struct phy_device *phydev, struct ethtool_eee *data); | |
42e836eb | 928 | int phy_ethtool_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol); |
4017b4d3 SS |
929 | void phy_ethtool_get_wol(struct phy_device *phydev, |
930 | struct ethtool_wolinfo *wol); | |
9d9a77ce PR |
931 | int phy_ethtool_get_link_ksettings(struct net_device *ndev, |
932 | struct ethtool_link_ksettings *cmd); | |
933 | int phy_ethtool_set_link_ksettings(struct net_device *ndev, | |
934 | const struct ethtool_link_ksettings *cmd); | |
e86a8987 | 935 | int phy_ethtool_nway_reset(struct net_device *ndev); |
a59a4d19 | 936 | |
90eff909 | 937 | #if IS_ENABLED(CONFIG_PHYLIB) |
9b9a8bfc AF |
938 | int __init mdio_bus_init(void); |
939 | void mdio_bus_exit(void); | |
90eff909 | 940 | #endif |
9b9a8bfc | 941 | |
00db8189 | 942 | extern struct bus_type mdio_bus_type; |
c31accd1 | 943 | |
648ea013 FF |
944 | struct mdio_board_info { |
945 | const char *bus_id; | |
946 | char modalias[MDIO_NAME_SIZE]; | |
947 | int mdio_addr; | |
948 | const void *platform_data; | |
949 | }; | |
950 | ||
90eff909 | 951 | #if IS_ENABLED(CONFIG_MDIO_DEVICE) |
648ea013 FF |
952 | int mdiobus_register_board_info(const struct mdio_board_info *info, |
953 | unsigned int n); | |
954 | #else | |
955 | static inline int mdiobus_register_board_info(const struct mdio_board_info *i, | |
956 | unsigned int n) | |
957 | { | |
958 | return 0; | |
959 | } | |
960 | #endif | |
961 | ||
962 | ||
c31accd1 JH |
963 | /** |
964 | * module_phy_driver() - Helper macro for registering PHY drivers | |
965 | * @__phy_drivers: array of PHY drivers to register | |
966 | * | |
967 | * Helper macro for PHY drivers which do not do anything special in module | |
968 | * init/exit. Each module may only use this macro once, and calling it | |
969 | * replaces module_init() and module_exit(). | |
970 | */ | |
971 | #define phy_module_driver(__phy_drivers, __count) \ | |
972 | static int __init phy_module_init(void) \ | |
973 | { \ | |
be01da72 | 974 | return phy_drivers_register(__phy_drivers, __count, THIS_MODULE); \ |
c31accd1 JH |
975 | } \ |
976 | module_init(phy_module_init); \ | |
977 | static void __exit phy_module_exit(void) \ | |
978 | { \ | |
979 | phy_drivers_unregister(__phy_drivers, __count); \ | |
980 | } \ | |
981 | module_exit(phy_module_exit) | |
982 | ||
983 | #define module_phy_driver(__phy_drivers) \ | |
984 | phy_module_driver(__phy_drivers, ARRAY_SIZE(__phy_drivers)) | |
985 | ||
00db8189 | 986 | #endif /* __PHY_H */ |