]> git.proxmox.com Git - mirror_ubuntu-artful-kernel.git/blame - include/linux/scc.h
[PATCH] ARM SMP: TLB implementations only affect local CPU
[mirror_ubuntu-artful-kernel.git] / include / linux / scc.h
CommitLineData
1da177e4
LT
1/* $Id: scc.h,v 1.29 1997/04/02 14:56:45 jreuter Exp jreuter $ */
2
3#ifndef _SCC_H
4#define _SCC_H
5
6#include <linux/config.h>
7
8/* selection of hardware types */
9
10#define PA0HZP 0x00 /* hardware type for PA0HZP SCC card and compatible */
11#define EAGLE 0x01 /* hardware type for EAGLE card */
12#define PC100 0x02 /* hardware type for PC100 card */
13#define PRIMUS 0x04 /* hardware type for PRIMUS-PC (DG9BL) card */
14#define DRSI 0x08 /* hardware type for DRSI PC*Packet card */
15#define BAYCOM 0x10 /* hardware type for BayCom (U)SCC */
16
17/* DEV ioctl() commands */
18
19enum SCC_ioctl_cmds {
20 SIOCSCCRESERVED = SIOCDEVPRIVATE,
21 SIOCSCCCFG,
22 SIOCSCCINI,
23 SIOCSCCCHANINI,
24 SIOCSCCSMEM,
25 SIOCSCCGKISS,
26 SIOCSCCSKISS,
27 SIOCSCCGSTAT,
28 SIOCSCCCAL
29};
30
31/* Device parameter control (from WAMPES) */
32
33enum L1_params {
34 PARAM_DATA,
35 PARAM_TXDELAY,
36 PARAM_PERSIST,
37 PARAM_SLOTTIME,
38 PARAM_TXTAIL,
39 PARAM_FULLDUP,
40 PARAM_SOFTDCD, /* was: PARAM_HW */
41 PARAM_MUTE, /* ??? */
42 PARAM_DTR,
43 PARAM_RTS,
44 PARAM_SPEED,
45 PARAM_ENDDELAY, /* ??? */
46 PARAM_GROUP,
47 PARAM_IDLE,
48 PARAM_MIN,
49 PARAM_MAXKEY,
50 PARAM_WAIT,
51 PARAM_MAXDEFER,
52 PARAM_TX,
53 PARAM_HWEVENT = 31,
54 PARAM_RETURN = 255 /* reset kiss mode */
55};
56
57/* fulldup parameter */
58
59enum FULLDUP_modes {
60 KISS_DUPLEX_HALF, /* normal CSMA operation */
61 KISS_DUPLEX_FULL, /* fullduplex, key down trx after transmission */
62 KISS_DUPLEX_LINK, /* fullduplex, key down trx after 'idletime' sec */
63 KISS_DUPLEX_OPTIMA /* fullduplex, let the protocol layer control the hw */
64};
65
66/* misc. parameters */
67
68#define TIMER_OFF 65535U /* to switch off timers */
69#define NO_SUCH_PARAM 65534U /* param not implemented */
70
71/* HWEVENT parameter */
72
73enum HWEVENT_opts {
74 HWEV_DCD_ON,
75 HWEV_DCD_OFF,
76 HWEV_ALL_SENT
77};
78
79/* channel grouping */
80
81#define RXGROUP 0100 /* if set, only tx when all channels clear */
82#define TXGROUP 0200 /* if set, don't transmit simultaneously */
83
84/* Tx/Rx clock sources */
85
86enum CLOCK_sources {
87 CLK_DPLL, /* normal halfduplex operation */
88 CLK_EXTERNAL, /* external clocking (G3RUH/DF9IC modems) */
89 CLK_DIVIDER, /* Rx = DPLL, Tx = divider (fullduplex with */
90 /* modems without clock regeneration */
91 CLK_BRG /* experimental fullduplex mode with DPLL/BRG for */
92 /* MODEMs without clock recovery */
93};
94
95/* Tx state */
96
97enum TX_state {
98 TXS_IDLE, /* Transmitter off, no data pending */
99 TXS_BUSY, /* waiting for permission to send / tailtime */
100 TXS_ACTIVE, /* Transmitter on, sending data */
101 TXS_NEWFRAME, /* reset CRC and send (next) frame */
102 TXS_IDLE2, /* Transmitter on, no data pending */
103 TXS_WAIT, /* Waiting for Mintime to expire */
104 TXS_TIMEOUT /* We had a transmission timeout */
105};
106
107typedef unsigned long io_port; /* type definition for an 'io port address' */
108
109/* SCC statistical information */
110
111struct scc_stat {
112 long rxints; /* Receiver interrupts */
113 long txints; /* Transmitter interrupts */
114 long exints; /* External/status interrupts */
115 long spints; /* Special receiver interrupts */
116
117 long txframes; /* Packets sent */
118 long rxframes; /* Number of Frames Actually Received */
119 long rxerrs; /* CRC Errors */
120 long txerrs; /* KISS errors */
121
122 unsigned int nospace; /* "Out of buffers" */
123 unsigned int rx_over; /* Receiver Overruns */
124 unsigned int tx_under; /* Transmitter Underruns */
125
126 unsigned int tx_state; /* Transmitter state */
127 int tx_queued; /* tx frames enqueued */
128
129 unsigned int maxqueue; /* allocated tx_buffers */
130 unsigned int bufsize; /* used buffersize */
131};
132
133struct scc_modem {
134 long speed; /* Line speed, bps */
135 char clocksrc; /* 0 = DPLL, 1 = external, 2 = divider */
136 char nrz; /* NRZ instead of NRZI */
137};
138
139struct scc_kiss_cmd {
140 int command; /* one of the KISS-Commands defined above */
141 unsigned param; /* KISS-Param */
142};
143
144struct scc_hw_config {
145 io_port data_a; /* data port channel A */
146 io_port ctrl_a; /* control port channel A */
147 io_port data_b; /* data port channel B */
148 io_port ctrl_b; /* control port channel B */
149 io_port vector_latch; /* INTACK-Latch (#) */
150 io_port special; /* special function port */
151
152 int irq; /* irq */
153 long clock; /* clock */
154 char option; /* command for function port */
155
156 char brand; /* hardware type */
157 char escc; /* use ext. features of a 8580/85180/85280 */
158};
159
160/* (#) only one INTACK latch allowed. */
161
162
163struct scc_mem_config {
164 unsigned int dummy;
165 unsigned int bufsize;
166};
167
168struct scc_calibrate {
169 unsigned int time;
170 unsigned char pattern;
171};
172
173#ifdef __KERNEL__
174
175enum {TX_OFF, TX_ON}; /* command for scc_key_trx() */
176
177/* Vector masks in RR2B */
178
179#define VECTOR_MASK 0x06
180#define TXINT 0x00
181#define EXINT 0x02
182#define RXINT 0x04
183#define SPINT 0x06
184
185#ifdef CONFIG_SCC_DELAY
186#define Inb(port) inb_p(port)
187#define Outb(port, val) outb_p(val, port)
188#else
189#define Inb(port) inb(port)
190#define Outb(port, val) outb(val, port)
191#endif
192
193/* SCC channel control structure for KISS */
194
195struct scc_kiss {
196 unsigned char txdelay; /* Transmit Delay 10 ms/cnt */
197 unsigned char persist; /* Persistence (0-255) as a % */
198 unsigned char slottime; /* Delay to wait on persistence hit */
199 unsigned char tailtime; /* Delay after last byte written */
200 unsigned char fulldup; /* Full Duplex mode 0=CSMA 1=DUP 2=ALWAYS KEYED */
201 unsigned char waittime; /* Waittime before any transmit attempt */
202 unsigned int maxkeyup; /* Maximum time to transmit (seconds) */
203 unsigned int mintime; /* Minimal offtime after MAXKEYUP timeout (seconds) */
204 unsigned int idletime; /* Maximum idle time in ALWAYS KEYED mode (seconds) */
205 unsigned int maxdefer; /* Timer for CSMA channel busy limit */
206 unsigned char tx_inhibit; /* Transmit is not allowed when set */
207 unsigned char group; /* Group ID for AX.25 TX interlocking */
208 unsigned char mode; /* 'normal' or 'hwctrl' mode (unused) */
209 unsigned char softdcd; /* Use DPLL instead of DCD pin for carrier detect */
210};
211
212
213/* SCC channel structure */
214
215struct scc_channel {
216 int init; /* channel exists? */
217
218 struct net_device *dev; /* link to device control structure */
219 struct net_device_stats dev_stat;/* device statistics */
220
221 char brand; /* manufacturer of the board */
222 long clock; /* used clock */
223
224 io_port ctrl; /* I/O address of CONTROL register */
225 io_port data; /* I/O address of DATA register */
226 io_port special; /* I/O address of special function port */
227 int irq; /* Number of Interrupt */
228
229 char option;
230 char enhanced; /* Enhanced SCC support */
231
232 unsigned char wreg[16]; /* Copy of last written value in WRx */
233 unsigned char status; /* Copy of R0 at last external interrupt */
234 unsigned char dcd; /* DCD status */
235
236 struct scc_kiss kiss; /* control structure for KISS params */
237 struct scc_stat stat; /* statistical information */
238 struct scc_modem modem; /* modem information */
239
240 struct sk_buff_head tx_queue; /* next tx buffer */
241 struct sk_buff *rx_buff; /* pointer to frame currently received */
242 struct sk_buff *tx_buff; /* pointer to frame currently transmitted */
243
244 /* Timer */
245 struct timer_list tx_t; /* tx timer for this channel */
246 struct timer_list tx_wdog; /* tx watchdogs */
247
248 /* Channel lock */
249 spinlock_t lock; /* Channel guard lock */
250};
251
252#endif /* defined(__KERNEL__) */
253#endif /* defined(_SCC_H) */