[mirror_ubuntu-bionic-kernel.git] / include / linux / serial_core.h

/*
 *  linux/drivers/char/serial_core.h
 *
 *  Copyright (C) 2000 Deep Blue Solutions Ltd.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
#ifndef LINUX_SERIAL_CORE_H
#define LINUX_SERIAL_CORE_H


#include <linux/compiler.h>
#include <linux/interrupt.h>
#include <linux/circ_buf.h>
#include <linux/spinlock.h>
#include <linux/sched.h>
#include <linux/tty.h>
#include <linux/mutex.h>
#include <linux/sysrq.h>
#include <uapi/linux/serial_core.h>

#ifdef CONFIG_SERIAL_CORE_CONSOLE
#define uart_console(port) \
	((port)->cons && (port)->cons->index == (port)->line)
#else
#define uart_console(port)      (0)
#endif

struct uart_port;
struct serial_struct;
struct device;

/*
 * This structure describes all the operations that can be done on the
 * physical hardware.  See Documentation/serial/driver for details.
 */
struct uart_ops {
	unsigned int	(*tx_empty)(struct uart_port *);
	void		(*set_mctrl)(struct uart_port *, unsigned int mctrl);
	unsigned int	(*get_mctrl)(struct uart_port *);
	void		(*stop_tx)(struct uart_port *);
	void		(*start_tx)(struct uart_port *);
	void		(*throttle)(struct uart_port *);
	void		(*unthrottle)(struct uart_port *);
	void		(*send_xchar)(struct uart_port *, char ch);
	void		(*stop_rx)(struct uart_port *);
	void		(*enable_ms)(struct uart_port *);
	void		(*break_ctl)(struct uart_port *, int ctl);
	int		(*startup)(struct uart_port *);
	void		(*shutdown)(struct uart_port *);
	void		(*flush_buffer)(struct uart_port *);
	void		(*set_termios)(struct uart_port *, struct ktermios *new,
				       struct ktermios *old);
	void		(*set_ldisc)(struct uart_port *, int new);
	void		(*pm)(struct uart_port *, unsigned int state,
			      unsigned int oldstate);

	/*
	 * Return a string describing the type of the port
	 */
	const char	*(*type)(struct uart_port *);

	/*
	 * Release IO and memory resources used by the port.
	 * This includes iounmap if necessary.
	 */
	void		(*release_port)(struct uart_port *);

	/*
	 * Request IO and memory resources used by the port.
	 * This includes iomapping the port if necessary.
	 */
	int		(*request_port)(struct uart_port *);
	void		(*config_port)(struct uart_port *, int);
	int		(*verify_port)(struct uart_port *, struct serial_struct *);
	int		(*ioctl)(struct uart_port *, unsigned int, unsigned long);
#ifdef CONFIG_CONSOLE_POLL
	int		(*poll_init)(struct uart_port *);
	void		(*poll_put_char)(struct uart_port *, unsigned char);
	int		(*poll_get_char)(struct uart_port *);
#endif
};

#define NO_POLL_CHAR		0x00ff0000
#define UART_CONFIG_TYPE	(1 << 0)
#define UART_CONFIG_IRQ		(1 << 1)

struct uart_icount {
	__u32	cts;
	__u32	dsr;
	__u32	rng;
	__u32	dcd;
	__u32	rx;
	__u32	tx;
	__u32	frame;
	__u32	overrun;
	__u32	parity;
	__u32	brk;
	__u32	buf_overrun;
};

typedef unsigned int __bitwise__ upf_t;

struct uart_port {
	spinlock_t		lock;			/* port lock */
	unsigned long		iobase;			/* in/out[bwl] */
	unsigned char __iomem	*membase;		/* read/write[bwl] */
	unsigned int		(*serial_in)(struct uart_port *, int);
	void			(*serial_out)(struct uart_port *, int, int);
	void			(*set_termios)(struct uart_port *,
				               struct ktermios *new,
				               struct ktermios *old);
	int			(*handle_irq)(struct uart_port *);
	void			(*pm)(struct uart_port *, unsigned int state,
				      unsigned int old);
	void			(*handle_break)(struct uart_port *);
	unsigned int		irq;			/* irq number */
	unsigned long		irqflags;		/* irq flags  */
	unsigned int		uartclk;		/* base uart clock */
	unsigned int		fifosize;		/* tx fifo size */
	unsigned char		x_char;			/* xon/xoff char */
	unsigned char		regshift;		/* reg offset shift */
	unsigned char		iotype;			/* io access style */
	unsigned char		unused1;

#define UPIO_PORT		(0)
#define UPIO_HUB6		(1)
#define UPIO_MEM		(2)
#define UPIO_MEM32		(3)
#define UPIO_AU			(4)			/* Au1x00 and RT288x type IO */
#define UPIO_TSI		(5)			/* Tsi108/109 type IO */

	unsigned int		read_status_mask;	/* driver specific */
	unsigned int		ignore_status_mask;	/* driver specific */
	struct uart_state	*state;			/* pointer to parent state */
	struct uart_icount	icount;			/* statistics */

	struct console		*cons;			/* struct console, if any */
#if defined(CONFIG_SERIAL_CORE_CONSOLE) || defined(SUPPORT_SYSRQ)
	unsigned long		sysrq;			/* sysrq timeout */
#endif

	upf_t			flags;

#define UPF_FOURPORT		((__force upf_t) (1 << 1))
#define UPF_SAK			((__force upf_t) (1 << 2))
#define UPF_SPD_MASK		((__force upf_t) (0x1030))
#define UPF_SPD_HI		((__force upf_t) (0x0010))
#define UPF_SPD_VHI		((__force upf_t) (0x0020))
#define UPF_SPD_CUST		((__force upf_t) (0x0030))
#define UPF_SPD_SHI		((__force upf_t) (0x1000))
#define UPF_SPD_WARP		((__force upf_t) (0x1010))
#define UPF_SKIP_TEST		((__force upf_t) (1 << 6))
#define UPF_AUTO_IRQ		((__force upf_t) (1 << 7))
#define UPF_HARDPPS_CD		((__force upf_t) (1 << 11))
#define UPF_LOW_LATENCY		((__force upf_t) (1 << 13))
#define UPF_BUGGY_UART		((__force upf_t) (1 << 14))
#define UPF_NO_TXEN_TEST	((__force upf_t) (1 << 15))
#define UPF_MAGIC_MULTIPLIER	((__force upf_t) (1 << 16))
/* Port has hardware-assisted h/w flow control (iow, auto-RTS *not* auto-CTS) */
#define UPF_HARD_FLOW		((__force upf_t) (1 << 21))
/* Port has hardware-assisted s/w flow control */
#define UPF_SOFT_FLOW		((__force upf_t) (1 << 22))
#define UPF_CONS_FLOW		((__force upf_t) (1 << 23))
#define UPF_SHARE_IRQ		((__force upf_t) (1 << 24))
#define UPF_EXAR_EFR		((__force upf_t) (1 << 25))
#define UPF_BUG_THRE		((__force upf_t) (1 << 26))
/* The exact UART type is known and should not be probed.  */
#define UPF_FIXED_TYPE		((__force upf_t) (1 << 27))
#define UPF_BOOT_AUTOCONF	((__force upf_t) (1 << 28))
#define UPF_FIXED_PORT		((__force upf_t) (1 << 29))
#define UPF_DEAD		((__force upf_t) (1 << 30))
#define UPF_IOREMAP		((__force upf_t) (1 << 31))

#define UPF_CHANGE_MASK		((__force upf_t) (0x17fff))
#define UPF_USR_MASK		((__force upf_t) (UPF_SPD_MASK|UPF_LOW_LATENCY))

	unsigned int		mctrl;			/* current modem ctrl settings */
	unsigned int		timeout;		/* character-based timeout */
	unsigned int		type;			/* port type */
	const struct uart_ops	*ops;
	unsigned int		custom_divisor;
	unsigned int		line;			/* port index */
	resource_size_t		mapbase;		/* for ioremap */
	struct device		*dev;			/* parent device */
	unsigned char		hub6;			/* this should be in the 8250 driver */
	unsigned char		suspended;
	unsigned char		irq_wake;
	unsigned char		unused[2];
	struct attribute_group	*attr_group;		/* port specific attributes */
	const struct attribute_group **tty_groups;	/* all attributes (serial core use only) */
	void			*private_data;		/* generic platform data pointer */
};

static inline int serial_port_in(struct uart_port *up, int offset)
{
	return up->serial_in(up, offset);
}

static inline void serial_port_out(struct uart_port *up, int offset, int value)
{
	up->serial_out(up, offset, value);
}

/**
 * enum uart_pm_state - power states for UARTs
 * @UART_PM_STATE_ON: UART is powered, up and operational
 * @UART_PM_STATE_OFF: UART is powered off
 * @UART_PM_STATE_UNDEFINED: sentinel
 */
enum uart_pm_state {
	UART_PM_STATE_ON = 0,
	UART_PM_STATE_OFF = 3, /* number taken from ACPI */
	UART_PM_STATE_UNDEFINED,
};

/*
 * This is the state information which is persistent across opens.
 */
struct uart_state {
	struct tty_port		port;

	enum uart_pm_state	pm_state;
	struct circ_buf		xmit;

	struct uart_port	*uart_port;
};

#define UART_XMIT_SIZE	PAGE_SIZE


/* number of characters left in xmit buffer before we ask for more */
#define WAKEUP_CHARS		256

struct module;
struct tty_driver;

struct uart_driver {
	struct module		*owner;
	const char		*driver_name;
	const char		*dev_name;
	int			 major;
	int			 minor;
	int			 nr;
	struct console		*cons;

	/*
	 * these are private; the low level driver should not
	 * touch these; they should be initialised to NULL
	 */
	struct uart_state	*state;
	struct tty_driver	*tty_driver;
};

void uart_write_wakeup(struct uart_port *port);

/*
 * Baud rate helpers.
 */
void uart_update_timeout(struct uart_port *port, unsigned int cflag,
			 unsigned int baud);
unsigned int uart_get_baud_rate(struct uart_port *port, struct ktermios *termios,
				struct ktermios *old, unsigned int min,
				unsigned int max);
unsigned int uart_get_divisor(struct uart_port *port, unsigned int baud);

/* Base timer interval for polling */
static inline int uart_poll_timeout(struct uart_port *port)
{
	int timeout = port->timeout;

	return timeout > 6 ? (timeout / 2 - 2) : 1;
}

/*
 * Console helpers.
 */
struct earlycon_device {
	struct console *con;
	struct uart_port port;
	char options[16];		/* e.g., 115200n8 */
	unsigned int baud;
};
int setup_earlycon(char *buf, const char *match,
		   int (*setup)(struct earlycon_device *, const char *));

extern int of_setup_earlycon(unsigned long addr,
			     int (*setup)(struct earlycon_device *, const char *));

#define EARLYCON_DECLARE(name, func) \
static int __init name ## _setup_earlycon(char *buf) \
{ \
	return setup_earlycon(buf, __stringify(name), func); \
} \
early_param("earlycon", name ## _setup_earlycon);

#define OF_EARLYCON_DECLARE(name, compat, fn)				\
	_OF_DECLARE(earlycon, name, compat, fn, void *)

struct uart_port *uart_get_console(struct uart_port *ports, int nr,
				   struct console *c);
void uart_parse_options(char *options, int *baud, int *parity, int *bits,
			int *flow);
int uart_set_options(struct uart_port *port, struct console *co, int baud,
		     int parity, int bits, int flow);
struct tty_driver *uart_console_device(struct console *co, int *index);
void uart_console_write(struct uart_port *port, const char *s,
			unsigned int count,
			void (*putchar)(struct uart_port *, int));

/*
 * Port/driver registration/removal
 */
int uart_register_driver(struct uart_driver *uart);
void uart_unregister_driver(struct uart_driver *uart);
int uart_add_one_port(struct uart_driver *reg, struct uart_port *port);
int uart_remove_one_port(struct uart_driver *reg, struct uart_port *port);
int uart_match_port(struct uart_port *port1, struct uart_port *port2);

/*
 * Power Management
 */
int uart_suspend_port(struct uart_driver *reg, struct uart_port *port);
int uart_resume_port(struct uart_driver *reg, struct uart_port *port);

#define uart_circ_empty(circ)		((circ)->head == (circ)->tail)
#define uart_circ_clear(circ)		((circ)->head = (circ)->tail = 0)

#define uart_circ_chars_pending(circ)	\
	(CIRC_CNT((circ)->head, (circ)->tail, UART_XMIT_SIZE))

#define uart_circ_chars_free(circ)	\
	(CIRC_SPACE((circ)->head, (circ)->tail, UART_XMIT_SIZE))

static inline int uart_tx_stopped(struct uart_port *port)
{
	struct tty_struct *tty = port->state->port.tty;
	if(tty->stopped || tty->hw_stopped)
		return 1;
	return 0;
}

/*
 * The following are helper functions for the low level drivers.
 */

extern void uart_handle_dcd_change(struct uart_port *uport,
		unsigned int status);
extern void uart_handle_cts_change(struct uart_port *uport,
		unsigned int status);

extern void uart_insert_char(struct uart_port *port, unsigned int status,
		 unsigned int overrun, unsigned int ch, unsigned int flag);

#ifdef SUPPORT_SYSRQ
static inline int
uart_handle_sysrq_char(struct uart_port *port, unsigned int ch)
{
	if (port->sysrq) {
		if (ch && time_before(jiffies, port->sysrq)) {
			handle_sysrq(ch);
			port->sysrq = 0;
			return 1;
		}
		port->sysrq = 0;
	}
	return 0;
}
#else
#define uart_handle_sysrq_char(port,ch) ({ (void)port; 0; })
#endif

/*
 * We do the SysRQ and SAK checking like this...
 */
static inline int uart_handle_break(struct uart_port *port)
{
	struct uart_state *state = port->state;

	if (port->handle_break)
		port->handle_break(port);

#ifdef SUPPORT_SYSRQ
	if (port->cons && port->cons->index == port->line) {
		if (!port->sysrq) {
			port->sysrq = jiffies + HZ*5;
			return 1;
		}
		port->sysrq = 0;
	}
#endif
	if (port->flags & UPF_SAK)
		do_SAK(state->port.tty);
	return 0;
}

/*
 *	UART_ENABLE_MS - determine if port should enable modem status irqs
 */
#define UART_ENABLE_MS(port,cflag)	((port)->flags & UPF_HARDPPS_CD || \
					 (cflag) & CRTSCTS || \
					 !((cflag) & CLOCAL))

#endif /* LINUX_SERIAL_CORE_H */
Commit	Line	Data
1da177e4 LT	1	/*
	2	* linux/drivers/char/serial_core.h
	3	*
	4	* Copyright (C) 2000 Deep Blue Solutions Ltd.
	5	*
	6	* This program is free software; you can redistribute it and/or modify
	7	* it under the terms of the GNU General Public License as published by
	8	* the Free Software Foundation; either version 2 of the License, or
	9	* (at your option) any later version.
	10	*
	11	* This program is distributed in the hope that it will be useful,
	12	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	13	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	14	* GNU General Public License for more details.
	15	*
	16	* You should have received a copy of the GNU General Public License
	17	* along with this program; if not, write to the Free Software
	18	* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
	19	*/
	20	#ifndef LINUX_SERIAL_CORE_H
	21	#define LINUX_SERIAL_CORE_H
	22
1da177e4	23
661f83a6	24	#include <linux/compiler.h>
1da177e4 LT	25	#include <linux/interrupt.h>
	26	#include <linux/circ_buf.h>
	27	#include <linux/spinlock.h>
	28	#include <linux/sched.h>
	29	#include <linux/tty.h>
e2862f6a	30	#include <linux/mutex.h>
b11115c1	31	#include <linux/sysrq.h>
607ca46e	32	#include <uapi/linux/serial_core.h>
1da177e4	33
cf0ebee0 SP	34	#ifdef CONFIG_SERIAL_CORE_CONSOLE
	35	#define uart_console(port) \
	36	((port)->cons && (port)->cons->index == (port)->line)
	37	#else
	38	#define uart_console(port) (0)
	39	#endif
	40
1da177e4	41	struct uart_port;
1da177e4 LT	42	struct serial_struct;
	43	struct device;
	44
	45	/*
e759d7c5 KC	46	* This structure describes all the operations that can be done on the
e759d7c5 KC	47	* physical hardware. See Documentation/serial/driver for details.
1da177e4 LT	48	*/
	49	struct uart_ops {
	50	unsigned int (tx_empty)(struct uart_port );
	51	void (set_mctrl)(struct uart_port , unsigned int mctrl);
	52	unsigned int (get_mctrl)(struct uart_port );
b129a8cc RK	53	void (stop_tx)(struct uart_port );
b129a8cc RK	54	void (start_tx)(struct uart_port );
9aba8d5b RK	55	void (throttle)(struct uart_port );
9aba8d5b RK	56	void (unthrottle)(struct uart_port );
1da177e4 LT	57	void (send_xchar)(struct uart_port , char ch);
	58	void (stop_rx)(struct uart_port );
	59	void (enable_ms)(struct uart_port );
	60	void (break_ctl)(struct uart_port , int ctl);
	61	int (startup)(struct uart_port );
	62	void (shutdown)(struct uart_port );
6bb0e3a5	63	void (flush_buffer)(struct uart_port );
606d099c AC	64	void (set_termios)(struct uart_port , struct ktermios *new,
606d099c AC	65	struct ktermios *old);
d87d9b7d	66	void (set_ldisc)(struct uart_port , int new);
1da177e4 LT	67	void (pm)(struct uart_port , unsigned int state,
1da177e4 LT	68	unsigned int oldstate);
1da177e4 LT	69
	70	/*
	71	* Return a string describing the type of the port
	72	*/
e759d7c5	73	const char (type)(struct uart_port *);
1da177e4 LT	74
	75	/*
	76	* Release IO and memory resources used by the port.
	77	* This includes iounmap if necessary.
	78	*/
	79	void (release_port)(struct uart_port );
	80
	81	/*
	82	* Request IO and memory resources used by the port.
	83	* This includes iomapping the port if necessary.
	84	*/
	85	int (request_port)(struct uart_port );
	86	void (config_port)(struct uart_port , int);
	87	int (verify_port)(struct uart_port , struct serial_struct *);
	88	int (ioctl)(struct uart_port , unsigned int, unsigned long);
f2d937f3	89	#ifdef CONFIG_CONSOLE_POLL
c7f3e708	90	int (poll_init)(struct uart_port );
e759d7c5	91	void (poll_put_char)(struct uart_port , unsigned char);
f2d937f3 JW	92	int (poll_get_char)(struct uart_port );
f2d937f3 JW	93	#endif
1da177e4 LT	94	};
1da177e4 LT	95
f5316b4a	96	#define NO_POLL_CHAR 0x00ff0000
1da177e4 LT	97	#define UART_CONFIG_TYPE (1 << 0)
	98	#define UART_CONFIG_IRQ (1 << 1)
	99
	100	struct uart_icount {
	101	__u32 cts;
	102	__u32 dsr;
	103	__u32 rng;
	104	__u32 dcd;
	105	__u32 rx;
	106	__u32 tx;
	107	__u32 frame;
	108	__u32 overrun;
	109	__u32 parity;
	110	__u32 brk;
	111	__u32 buf_overrun;
	112	};
	113
0077d45e RK	114	typedef unsigned int __bitwise__ upf_t;
0077d45e RK	115
1da177e4 LT	116	struct uart_port {
1da177e4 LT	117	spinlock_t lock; /* port lock */
0c8946d9	118	unsigned long iobase; /* in/out[bwl] */
1da177e4	119	unsigned char __iomem membase; / read/write[bwl] */
7d6a07d1 DD	120	unsigned int (serial_in)(struct uart_port , int);
7d6a07d1 DD	121	void (serial_out)(struct uart_port , int, int);
235dae5d PL	122	void (set_termios)(struct uart_port ,
	123	struct ktermios *new,
	124	struct ktermios *old);
a74036f5	125	int (handle_irq)(struct uart_port );
c161afe9 ML	126	void (pm)(struct uart_port , unsigned int state,
c161afe9 ML	127	unsigned int old);
bf03f65b	128	void (handle_break)(struct uart_port );
1da177e4	129	unsigned int irq; /* irq number */
1c2f0493	130	unsigned long irqflags; /* irq flags */
1da177e4	131	unsigned int uartclk; /* base uart clock */
947deee8	132	unsigned int fifosize; /* tx fifo size */
1da177e4 LT	133	unsigned char x_char; /* xon/xoff char */
	134	unsigned char regshift; /* reg offset shift */
	135	unsigned char iotype; /* io access style */
947deee8	136	unsigned char unused1;
1da177e4 LT	137
	138	#define UPIO_PORT (0)
	139	#define UPIO_HUB6 (1)
	140	#define UPIO_MEM (2)
	141	#define UPIO_MEM32 (3)
c420811f	142	#define UPIO_AU (4) /* Au1x00 and RT288x type IO */
3be91ec7	143	#define UPIO_TSI (5) /* Tsi108/109 type IO */
1da177e4 LT	144
	145	unsigned int read_status_mask; /* driver specific */
	146	unsigned int ignore_status_mask; /* driver specific */
ebd2c8f6	147	struct uart_state state; / pointer to parent state */
1da177e4 LT	148	struct uart_icount icount; /* statistics */
	149
	150	struct console cons; / struct console, if any */
06e82df0	151	#if defined(CONFIG_SERIAL_CORE_CONSOLE) \|\| defined(SUPPORT_SYSRQ)
1da177e4 LT	152	unsigned long sysrq; /* sysrq timeout */
	153	#endif
	154
0077d45e RK	155	upf_t flags;
	156
	157	#define UPF_FOURPORT ((__force upf_t) (1 << 1))
	158	#define UPF_SAK ((__force upf_t) (1 << 2))
	159	#define UPF_SPD_MASK ((__force upf_t) (0x1030))
	160	#define UPF_SPD_HI ((__force upf_t) (0x0010))
	161	#define UPF_SPD_VHI ((__force upf_t) (0x0020))
	162	#define UPF_SPD_CUST ((__force upf_t) (0x0030))
	163	#define UPF_SPD_SHI ((__force upf_t) (0x1000))
	164	#define UPF_SPD_WARP ((__force upf_t) (0x1010))
	165	#define UPF_SKIP_TEST ((__force upf_t) (1 << 6))
	166	#define UPF_AUTO_IRQ ((__force upf_t) (1 << 7))
	167	#define UPF_HARDPPS_CD ((__force upf_t) (1 << 11))
	168	#define UPF_LOW_LATENCY ((__force upf_t) (1 << 13))
	169	#define UPF_BUGGY_UART ((__force upf_t) (1 << 14))
b6adea33	170	#define UPF_NO_TXEN_TEST ((__force upf_t) (1 << 15))
0077d45e	171	#define UPF_MAGIC_MULTIPLIER ((__force upf_t) (1 << 16))
dba05832 RK	172	/* Port has hardware-assisted h/w flow control (iow, auto-RTS not auto-CTS) */
dba05832 RK	173	#define UPF_HARD_FLOW ((__force upf_t) (1 << 21))
2cbacafd RK	174	/* Port has hardware-assisted s/w flow control */
2cbacafd RK	175	#define UPF_SOFT_FLOW ((__force upf_t) (1 << 22))
0077d45e RK	176	#define UPF_CONS_FLOW ((__force upf_t) (1 << 23))
0077d45e RK	177	#define UPF_SHARE_IRQ ((__force upf_t) (1 << 24))
06315348	178	#define UPF_EXAR_EFR ((__force upf_t) (1 << 25))
bc02d15a	179	#define UPF_BUG_THRE ((__force upf_t) (1 << 26))
8e23fcc8 DD	180	/* The exact UART type is known and should not be probed. */
8e23fcc8 DD	181	#define UPF_FIXED_TYPE ((__force upf_t) (1 << 27))
0077d45e	182	#define UPF_BOOT_AUTOCONF ((__force upf_t) (1 << 28))
abb4a239	183	#define UPF_FIXED_PORT ((__force upf_t) (1 << 29))
68ac64cd	184	#define UPF_DEAD ((__force upf_t) (1 << 30))
0077d45e RK	185	#define UPF_IOREMAP ((__force upf_t) (1 << 31))
	186
	187	#define UPF_CHANGE_MASK ((__force upf_t) (0x17fff))
	188	#define UPF_USR_MASK ((__force upf_t) (UPF_SPD_MASK\|UPF_LOW_LATENCY))
1da177e4 LT	189
	190	unsigned int mctrl; /* current modem ctrl settings */
	191	unsigned int timeout; /* character-based timeout */
	192	unsigned int type; /* port type */
ba899dbc	193	const struct uart_ops *ops;
1da177e4 LT	194	unsigned int custom_divisor;
1da177e4 LT	195	unsigned int line; /* port index */
4f640efb	196	resource_size_t mapbase; /* for ioremap */
1da177e4 LT	197	struct device dev; / parent device */
1da177e4 LT	198	unsigned char hub6; /* this should be in the 8250 driver */
b3b708fa	199	unsigned char suspended;
3f960dbb	200	unsigned char irq_wake;
b3b708fa	201	unsigned char unused[2];
266dcff0 GKH	202	struct attribute_group attr_group; / port specific attributes */
266dcff0 GKH	203	const struct attribute_group *tty_groups; / all attributes (serial core use only) */
beab697a	204	void private_data; / generic platform data pointer */
1da177e4 LT	205	};
1da177e4 LT	206
927353a7 PG	207	static inline int serial_port_in(struct uart_port *up, int offset)
	208	{
	209	return up->serial_in(up, offset);
	210	}
	211
	212	static inline void serial_port_out(struct uart_port *up, int offset, int value)
	213	{
	214	up->serial_out(up, offset, value);
	215	}
	216
6f538fe3 LW	217	/**
	218	* enum uart_pm_state - power states for UARTs
	219	* @UART_PM_STATE_ON: UART is powered, up and operational
	220	* @UART_PM_STATE_OFF: UART is powered off
	221	* @UART_PM_STATE_UNDEFINED: sentinel
	222	*/
	223	enum uart_pm_state {
	224	UART_PM_STATE_ON = 0,
	225	UART_PM_STATE_OFF = 3, /* number taken from ACPI */
	226	UART_PM_STATE_UNDEFINED,
	227	};
	228
ebd2c8f6 AC	229	/*
ebd2c8f6 AC	230	* This is the state information which is persistent across opens.
ebd2c8f6 AC	231	*/
ebd2c8f6 AC	232	struct uart_state {
df4f4dd4	233	struct tty_port port;
ebd2c8f6	234
6f538fe3	235	enum uart_pm_state pm_state;
1da177e4	236	struct circ_buf xmit;
1da177e4	237
ebd2c8f6	238	struct uart_port *uart_port;
f751928e AC	239	};
	240
	241	#define UART_XMIT_SIZE PAGE_SIZE
	242
	243
1da177e4 LT	244	/* number of characters left in xmit buffer before we ask for more */
	245	#define WAKEUP_CHARS 256
	246
	247	struct module;
	248	struct tty_driver;
	249
	250	struct uart_driver {
	251	struct module *owner;
	252	const char *driver_name;
	253	const char *dev_name;
1da177e4 LT	254	int major;
	255	int minor;
	256	int nr;
	257	struct console *cons;
	258
	259	/*
	260	* these are private; the low level driver should not
	261	* touch these; they should be initialised to NULL
	262	*/
	263	struct uart_state *state;
	264	struct tty_driver *tty_driver;
	265	};
	266
	267	void uart_write_wakeup(struct uart_port *port);
	268
	269	/*
	270	* Baud rate helpers.
	271	*/
	272	void uart_update_timeout(struct uart_port *port, unsigned int cflag,
	273	unsigned int baud);
606d099c AC	274	unsigned int uart_get_baud_rate(struct uart_port port, struct ktermios termios,
606d099c AC	275	struct ktermios *old, unsigned int min,
1da177e4 LT	276	unsigned int max);
	277	unsigned int uart_get_divisor(struct uart_port *port, unsigned int baud);
	278
54381067 AV	279	/* Base timer interval for polling */
	280	static inline int uart_poll_timeout(struct uart_port *port)
	281	{
	282	int timeout = port->timeout;
	283
	284	return timeout > 6 ? (timeout / 2 - 2) : 1;
	285	}
	286
1da177e4 LT	287	/*
	288	* Console helpers.
	289	*/
9aac5887 RH	290	struct earlycon_device {
	291	struct console *con;
	292	struct uart_port port;
	293	char options[16]; /* e.g., 115200n8 */
	294	unsigned int baud;
	295	};
	296	int setup_earlycon(char buf, const char match,
	297	int (setup)(struct earlycon_device , const char *));
	298
b0b6abd3 RH	299	extern int of_setup_earlycon(unsigned long addr,
	300	int (setup)(struct earlycon_device , const char *));
	301
9aac5887 RH	302	#define EARLYCON_DECLARE(name, func) \
	303	static int __init name ## _setup_earlycon(char *buf) \
	304	{ \
	305	return setup_earlycon(buf, __stringify(name), func); \
	306	} \
	307	early_param("earlycon", name ## _setup_earlycon);
	308
b0b6abd3 RH	309	#define OF_EARLYCON_DECLARE(name, compat, fn) \
	310	_OF_DECLARE(earlycon, name, compat, fn, void *)
	311
1da177e4 LT	312	struct uart_port uart_get_console(struct uart_port ports, int nr,
	313	struct console *c);
	314	void uart_parse_options(char options, int baud, int parity, int bits,
	315	int *flow);
	316	int uart_set_options(struct uart_port port, struct console co, int baud,
	317	int parity, int bits, int flow);
	318	struct tty_driver uart_console_device(struct console co, int *index);
d358788f RK	319	void uart_console_write(struct uart_port port, const char s,
	320	unsigned int count,
	321	void (putchar)(struct uart_port , int));
1da177e4 LT	322
	323	/*
	324	* Port/driver registration/removal
	325	*/
	326	int uart_register_driver(struct uart_driver *uart);
	327	void uart_unregister_driver(struct uart_driver *uart);
1da177e4 LT	328	int uart_add_one_port(struct uart_driver reg, struct uart_port port);
	329	int uart_remove_one_port(struct uart_driver reg, struct uart_port port);
	330	int uart_match_port(struct uart_port port1, struct uart_port port2);
	331
	332	/*
	333	* Power Management
	334	*/
	335	int uart_suspend_port(struct uart_driver reg, struct uart_port port);
	336	int uart_resume_port(struct uart_driver reg, struct uart_port port);
	337
	338	#define uart_circ_empty(circ) ((circ)->head == (circ)->tail)
	339	#define uart_circ_clear(circ) ((circ)->head = (circ)->tail = 0)
	340
	341	#define uart_circ_chars_pending(circ) \
	342	(CIRC_CNT((circ)->head, (circ)->tail, UART_XMIT_SIZE))
	343
	344	#define uart_circ_chars_free(circ) \
	345	(CIRC_SPACE((circ)->head, (circ)->tail, UART_XMIT_SIZE))
	346
f751928e AC	347	static inline int uart_tx_stopped(struct uart_port *port)
f751928e AC	348	{
ebd2c8f6	349	struct tty_struct *tty = port->state->port.tty;
f751928e AC	350	if(tty->stopped \|\| tty->hw_stopped)
	351	return 1;
	352	return 0;
	353	}
1da177e4 LT	354
	355	/*
	356	* The following are helper functions for the low level drivers.
	357	*/
027d7dac JS	358
	359	extern void uart_handle_dcd_change(struct uart_port *uport,
	360	unsigned int status);
	361	extern void uart_handle_cts_change(struct uart_port *uport,
	362	unsigned int status);
	363
	364	extern void uart_insert_char(struct uart_port *port, unsigned int status,
	365	unsigned int overrun, unsigned int ch, unsigned int flag);
	366
	367	#ifdef SUPPORT_SYSRQ
1da177e4	368	static inline int
7d12e780	369	uart_handle_sysrq_char(struct uart_port *port, unsigned int ch)
1da177e4 LT	370	{
	371	if (port->sysrq) {
	372	if (ch && time_before(jiffies, port->sysrq)) {
f335397d	373	handle_sysrq(ch);
1da177e4 LT	374	port->sysrq = 0;
	375	return 1;
	376	}
	377	port->sysrq = 0;
	378	}
	379	return 0;
	380	}
027d7dac JS	381	#else
027d7dac JS	382	#define uart_handle_sysrq_char(port,ch) ({ (void)port; 0; })
4e149184	383	#endif
1da177e4 LT	384
	385	/*
	386	* We do the SysRQ and SAK checking like this...
	387	*/
	388	static inline int uart_handle_break(struct uart_port *port)
	389	{
ebd2c8f6	390	struct uart_state *state = port->state;
bf03f65b DW	391
	392	if (port->handle_break)
	393	port->handle_break(port);
	394
1da177e4 LT	395	#ifdef SUPPORT_SYSRQ
	396	if (port->cons && port->cons->index == port->line) {
	397	if (!port->sysrq) {
	398	port->sysrq = jiffies + HZ*5;
	399	return 1;
	400	}
	401	port->sysrq = 0;
	402	}
	403	#endif
27ae7a74	404	if (port->flags & UPF_SAK)
ebd2c8f6	405	do_SAK(state->port.tty);
1da177e4 LT	406	return 0;
	407	}
	408
1da177e4 LT	409	/*
	410	* UART_ENABLE_MS - determine if port should enable modem status irqs
	411	*/
	412	#define UART_ENABLE_MS(port,cflag) ((port)->flags & UPF_HARDPPS_CD \|\| \
	413	(cflag) & CRTSCTS \|\| \
	414	!((cflag) & CLOCAL))
	415
1da177e4	416	#endif /* LINUX_SERIAL_CORE_H */