[mirror_ubuntu-bionic-kernel.git] / include / linux / usb / musb.h

/*
 * This is used to for host and peripheral modes of the driver for
 * Inventra (Multidrop) Highspeed Dual-Role Controllers:  (M)HDRC.
 *
 * Board initialization should put one of these into dev->platform_data,
 * probably on some platform_device named "musb-hdrc".  It encapsulates
 * key configuration differences between boards.
 */

#ifndef __LINUX_USB_MUSB_H
#define __LINUX_USB_MUSB_H

/* The USB role is defined by the connector used on the board, so long as
 * standards are being followed.  (Developer boards sometimes won't.)
 */
enum musb_mode {
	MUSB_UNDEFINED = 0,
	MUSB_HOST,		/* A or Mini-A connector */
	MUSB_PERIPHERAL,	/* B or Mini-B connector */
	MUSB_OTG		/* Mini-AB connector */
};

struct clk;

enum musb_fifo_style {
	FIFO_RXTX,
	FIFO_TX,
	FIFO_RX
} __attribute__ ((packed));

enum musb_buf_mode {
	BUF_SINGLE,
	BUF_DOUBLE
} __attribute__ ((packed));

struct musb_fifo_cfg {
	u8			hw_ep_num;
	enum musb_fifo_style	style;
	enum musb_buf_mode	mode;
	u16			maxpacket;
};

#define MUSB_EP_FIFO(ep, st, m, pkt)		\
{						\
	.hw_ep_num	= ep,			\
	.style		= st,			\
	.mode		= m,			\
	.maxpacket	= pkt,			\
}

#define MUSB_EP_FIFO_SINGLE(ep, st, pkt)	\
	MUSB_EP_FIFO(ep, st, BUF_SINGLE, pkt)

#define MUSB_EP_FIFO_DOUBLE(ep, st, pkt)	\
	MUSB_EP_FIFO(ep, st, BUF_DOUBLE, pkt)

struct musb_hdrc_eps_bits {
	const char	name[16];
	u8		bits;
};

struct musb_hdrc_config {
	struct musb_fifo_cfg	*fifo_cfg;	/* board fifo configuration */
	unsigned		fifo_cfg_size;	/* size of the fifo configuration */

	/* MUSB configuration-specific details */
	unsigned	multipoint:1;	/* multipoint device */
	unsigned	dyn_fifo:1 __deprecated; /* supports dynamic fifo sizing */
	unsigned	soft_con:1 __deprecated; /* soft connect required */
	unsigned	utm_16:1 __deprecated; /* utm data witdh is 16 bits */
	unsigned	big_endian:1;	/* true if CPU uses big-endian */
	unsigned	mult_bulk_tx:1;	/* Tx ep required for multbulk pkts */
	unsigned	mult_bulk_rx:1;	/* Rx ep required for multbulk pkts */
	unsigned	high_iso_tx:1;	/* Tx ep required for HB iso */
	unsigned	high_iso_rx:1;	/* Rx ep required for HD iso */
	unsigned	dma:1 __deprecated; /* supports DMA */
	unsigned	vendor_req:1 __deprecated; /* vendor registers required */

	/* need to explicitly de-assert the port reset after resume? */
	unsigned	host_port_deassert_reset_at_resume:1;

	u8		num_eps;	/* number of endpoints _with_ ep0 */
	u8		dma_channels __deprecated; /* number of dma channels */
	u8		dyn_fifo_size;	/* dynamic size in bytes */
	u8		vendor_ctrl __deprecated; /* vendor control reg width */
	u8		vendor_stat __deprecated; /* vendor status reg witdh */
	u8		dma_req_chan __deprecated; /* bitmask for required dma channels */
	u8		ram_bits;	/* ram address size */

	struct musb_hdrc_eps_bits *eps_bits __deprecated;
#ifdef CONFIG_BLACKFIN
	/* A GPIO controlling VRSEL in Blackfin */
	unsigned int	gpio_vrsel;
	unsigned int	gpio_vrsel_active;
	/* musb CLKIN in Blackfin in MHZ */
	unsigned char   clkin;
#endif

};

struct musb_hdrc_platform_data {
	/* MUSB_HOST, MUSB_PERIPHERAL, or MUSB_OTG */
	u8		mode;

	/* for clk_get() */
	const char	*clock;

	/* (HOST or OTG) switch VBUS on/off */
	int		(*set_vbus)(struct device *dev, int is_on);

	/* (HOST or OTG) mA/2 power supplied on (default = 8mA) */
	u8		power;

	/* (PERIPHERAL) mA/2 max power consumed (default = 100mA) */
	u8		min_power;

	/* (HOST or OTG) msec/2 after VBUS on till power good */
	u8		potpgt;

	/* (HOST or OTG) program PHY for external Vbus */
	unsigned	extvbus:1;

	/* Power the device on or off */
	int		(*set_power)(int state);

	/* MUSB configuration-specific details */
	struct musb_hdrc_config	*config;

	/* Architecture specific board data	*/
	void		*board_data;

	/* Platform specific struct musb_ops pointer */
	const void	*platform_ops;
};


/* TUSB 6010 support */

#define	TUSB6010_OSCCLK_60	16667	/* psec/clk @ 60.0 MHz */
#define	TUSB6010_REFCLK_24	41667	/* psec/clk @ 24.0 MHz XI */
#define	TUSB6010_REFCLK_19	52083	/* psec/clk @ 19.2 MHz CLKIN */

#ifdef	CONFIG_ARCH_OMAP2

extern int __init tusb6010_setup_interface(
		struct musb_hdrc_platform_data *data,
		unsigned ps_refclk, unsigned waitpin,
		unsigned async_cs, unsigned sync_cs,
		unsigned irq, unsigned dmachan);

extern int tusb6010_platform_retime(unsigned is_refclk);

#endif	/* OMAP2 */

#endif /* __LINUX_USB_MUSB_H */
Commit	Line	Data
550a7375 FB	1	/*
	2	* This is used to for host and peripheral modes of the driver for
	3	* Inventra (Multidrop) Highspeed Dual-Role Controllers: (M)HDRC.
	4	*
	5	* Board initialization should put one of these into dev->platform_data,
05ac10dd	6	* probably on some platform_device named "musb-hdrc". It encapsulates
550a7375 FB	7	* key configuration differences between boards.
	8	*/
	9
fbfc396e MG	10	#ifndef __LINUX_USB_MUSB_H
	11	#define __LINUX_USB_MUSB_H
	12
550a7375 FB	13	/* The USB role is defined by the connector used on the board, so long as
	14	* standards are being followed. (Developer boards sometimes won't.)
	15	*/
	16	enum musb_mode {
	17	MUSB_UNDEFINED = 0,
	18	MUSB_HOST, /* A or Mini-A connector */
	19	MUSB_PERIPHERAL, /* B or Mini-B connector */
	20	MUSB_OTG /* Mini-AB connector */
	21	};
	22
	23	struct clk;
	24
e6c213b2 FB	25	enum musb_fifo_style {
	26	FIFO_RXTX,
	27	FIFO_TX,
	28	FIFO_RX
	29	} __attribute__ ((packed));
	30
	31	enum musb_buf_mode {
	32	BUF_SINGLE,
	33	BUF_DOUBLE
	34	} __attribute__ ((packed));
	35
	36	struct musb_fifo_cfg {
	37	u8 hw_ep_num;
	38	enum musb_fifo_style style;
	39	enum musb_buf_mode mode;
	40	u16 maxpacket;
	41	};
	42
	43	#define MUSB_EP_FIFO(ep, st, m, pkt) \
	44	{ \
	45	.hw_ep_num = ep, \
	46	.style = st, \
	47	.mode = m, \
	48	.maxpacket = pkt, \
	49	}
	50
	51	#define MUSB_EP_FIFO_SINGLE(ep, st, pkt) \
	52	MUSB_EP_FIFO(ep, st, BUF_SINGLE, pkt)
	53
	54	#define MUSB_EP_FIFO_DOUBLE(ep, st, pkt) \
	55	MUSB_EP_FIFO(ep, st, BUF_DOUBLE, pkt)
	56
ca6d1b13 FB	57	struct musb_hdrc_eps_bits {
	58	const char name[16];
	59	u8 bits;
	60	};
	61
	62	struct musb_hdrc_config {
e6c213b2 FB	63	struct musb_fifo_cfg fifo_cfg; / board fifo configuration */
	64	unsigned fifo_cfg_size; /* size of the fifo configuration */
	65
ca6d1b13 FB	66	/* MUSB configuration-specific details */
ca6d1b13 FB	67	unsigned multipoint:1; /* multipoint device */
c58bfa6b FB	68	unsigned dyn_fifo:1 __deprecated; /* supports dynamic fifo sizing */
	69	unsigned soft_con:1 __deprecated; /* soft connect required */
	70	unsigned utm_16:1 __deprecated; /* utm data witdh is 16 bits */
ca6d1b13 FB	71	unsigned big_endian:1; /* true if CPU uses big-endian */
	72	unsigned mult_bulk_tx:1; /* Tx ep required for multbulk pkts */
	73	unsigned mult_bulk_rx:1; /* Rx ep required for multbulk pkts */
	74	unsigned high_iso_tx:1; /* Tx ep required for HB iso */
	75	unsigned high_iso_rx:1; /* Rx ep required for HD iso */
c58bfa6b FB	76	unsigned dma:1 __deprecated; /* supports DMA */
c58bfa6b FB	77	unsigned vendor_req:1 __deprecated; /* vendor registers required */
ca6d1b13	78
869c5978 DM	79	/* need to explicitly de-assert the port reset after resume? */
	80	unsigned host_port_deassert_reset_at_resume:1;
	81
ca6d1b13	82	u8 num_eps; /* number of endpoints _with_ ep0 */
c58bfa6b	83	u8 dma_channels __deprecated; /* number of dma channels */
ca6d1b13	84	u8 dyn_fifo_size; /* dynamic size in bytes */
c58bfa6b FB	85	u8 vendor_ctrl __deprecated; /* vendor control reg width */
	86	u8 vendor_stat __deprecated; /* vendor status reg witdh */
	87	u8 dma_req_chan __deprecated; /* bitmask for required dma channels */
ca6d1b13 FB	88	u8 ram_bits; /* ram address size */
ca6d1b13 FB	89
c58bfa6b	90	struct musb_hdrc_eps_bits *eps_bits __deprecated;
2ffcdb3b	91	#ifdef CONFIG_BLACKFIN
0858a3a5 GKH	92	/* A GPIO controlling VRSEL in Blackfin */
0858a3a5 GKH	93	unsigned int gpio_vrsel;
6ddc6dae	94	unsigned int gpio_vrsel_active;
9c756462 BL	95	/* musb CLKIN in Blackfin in MHZ */
9c756462 BL	96	unsigned char clkin;
2ffcdb3b BW	97	#endif
2ffcdb3b BW	98
ca6d1b13 FB	99	};
ca6d1b13 FB	100
550a7375 FB	101	struct musb_hdrc_platform_data {
	102	/* MUSB_HOST, MUSB_PERIPHERAL, or MUSB_OTG */
	103	u8 mode;
	104
	105	/* for clk_get() */
	106	const char *clock;
	107
	108	/* (HOST or OTG) switch VBUS on/off */
	109	int (set_vbus)(struct device dev, int is_on);
	110
	111	/* (HOST or OTG) mA/2 power supplied on (default = 8mA) */
	112	u8 power;
	113
	114	/* (PERIPHERAL) mA/2 max power consumed (default = 100mA) */
	115	u8 min_power;
	116
	117	/* (HOST or OTG) msec/2 after VBUS on till power good */
	118	u8 potpgt;
	119
5fc4e779 AKG	120	/* (HOST or OTG) program PHY for external Vbus */
	121	unsigned extvbus:1;
	122
550a7375 FB	123	/* Power the device on or off */
	124	int (*set_power)(int state);
	125
ca6d1b13 FB	126	/* MUSB configuration-specific details */
ca6d1b13 FB	127	struct musb_hdrc_config *config;
884b8369 MM	128
	129	/* Architecture specific board data */
	130	void *board_data;
f7ec9437 FB	131
	132	/* Platform specific struct musb_ops pointer */
	133	const void *platform_ops;
550a7375 FB	134	};
	135
	136
	137	/* TUSB 6010 support */
	138
	139	#define TUSB6010_OSCCLK_60 16667 /* psec/clk @ 60.0 MHz */
	140	#define TUSB6010_REFCLK_24 41667 /* psec/clk @ 24.0 MHz XI */
	141	#define TUSB6010_REFCLK_19 52083 /* psec/clk @ 19.2 MHz CLKIN */
	142
	143	#ifdef CONFIG_ARCH_OMAP2
	144
	145	extern int __init tusb6010_setup_interface(
	146	struct musb_hdrc_platform_data *data,
	147	unsigned ps_refclk, unsigned waitpin,
	148	unsigned async_cs, unsigned sync_cs,
	149	unsigned irq, unsigned dmachan);
	150
	151	extern int tusb6010_platform_retime(unsigned is_refclk);
	152
	153	#endif /* OMAP2 */
fbfc396e MG	154
fbfc396e MG	155	#endif /* __LINUX_USB_MUSB_H */