]> git.proxmox.com Git - mirror_ubuntu-bionic-kernel.git/blame - include/sound/wm8962.h
soc: renesas: r8a77970-sysc: Correct names of A2DP/A2CN power domains
[mirror_ubuntu-bionic-kernel.git] / include / sound / wm8962.h
CommitLineData
9a76f1ff
MB
1/*
2 * wm8962.h -- WM8962 Soc Audio driver platform data
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
7 */
8
9#ifndef _WM8962_PDATA_H
10#define _WM8962_PDATA_H
11
12#define WM8962_MAX_GPIO 6
13
14/* Use to set GPIO default values to zero */
15#define WM8962_GPIO_SET 0x10000
16
7cd873c2
MB
17#define WM8962_GPIO_FN_CLKOUT 0
18#define WM8962_GPIO_FN_LOGIC 1
19#define WM8962_GPIO_FN_SDOUT 2
20#define WM8962_GPIO_FN_IRQ 3
21#define WM8962_GPIO_FN_THERMAL 4
22#define WM8962_GPIO_FN_PLL2_LOCK 6
23#define WM8962_GPIO_FN_PLL3_LOCK 7
24#define WM8962_GPIO_FN_FLL_LOCK 9
25#define WM8962_GPIO_FN_DRC_ACT 10
26#define WM8962_GPIO_FN_WSEQ_DONE 11
27#define WM8962_GPIO_FN_ALC_NG_ACT 12
28#define WM8962_GPIO_FN_ALC_PEAK_LIMIT 13
29#define WM8962_GPIO_FN_ALC_SATURATION 14
30#define WM8962_GPIO_FN_ALC_LEVEL_THR 15
31#define WM8962_GPIO_FN_ALC_LEVEL_LOCK 16
32#define WM8962_GPIO_FN_FIFO_ERR 17
33#define WM8962_GPIO_FN_OPCLK 18
34#define WM8962_GPIO_FN_DMICCLK 19
35#define WM8962_GPIO_FN_DMICDAT 20
36#define WM8962_GPIO_FN_MICD 21
37#define WM8962_GPIO_FN_MICSCD 22
38
9a76f1ff 39struct wm8962_pdata {
d7821953 40 struct clk *mclk;
3367b8d4 41 int gpio_base;
9a76f1ff
MB
42 u32 gpio_init[WM8962_MAX_GPIO];
43
a4f28c00
MB
44 /* Setup for microphone detection, raw value to be written to
45 * R48(0x30) - only microphone related bits will be updated.
46 * Detection may be enabled here for use with signals brought
47 * out on the GPIOs. */
48 u32 mic_cfg;
49
45e65504
MB
50 bool irq_active_low;
51
9a76f1ff 52 bool spk_mono; /* Speaker outputs tied together as mono */
182c51ce
MB
53
54 /**
55 * This flag should be set if one or both IN4 inputs is wired
56 * in a DC measurement configuration.
57 */
58 bool in4_dc_measure;
9a76f1ff
MB
59};
60
61#endif