[mirror_frr.git] / lib / command.h

/*
 * Zebra configuration command interface routine
 * Copyright (C) 1997, 98 Kunihiro Ishiguro
 *
 * This file is part of GNU Zebra.
 *
 * GNU Zebra is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published
 * by the Free Software Foundation; either version 2, or (at your
 * option) any later version.
 * 
 * GNU Zebra is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with GNU Zebra; see the file COPYING.  If not, write to the
 * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
 * Boston, MA 02111-1307, USA.
 */

#ifndef _ZEBRA_COMMAND_H
#define _ZEBRA_COMMAND_H

#include "vector.h"
#include "vty.h"

/* Host configuration variable */
struct host
{
  /* Host name of this router. */
  char *name;

  /* Password for vty interface. */
  char *password;
  char *password_encrypt;

  /* Enable password */
  char *enable;
  char *enable_encrypt;

  /* System wide terminal lines. */
  int lines;

  /* Log filename. */
  char *logfile;

  /* Log stdout. */
  u_char log_stdout;

  /* Log syslog. */
  u_char log_syslog;
  
  /* config file name of this host */
  char *config;

  /* Flags for services */
  int advanced;
  int encrypt;

  /* Banner configuration. */
  const char *motd;
};

/* There are some command levels which called from command node. */
enum node_type 
{
  AUTH_NODE,			/* Authentication mode of vty interface. */
  VIEW_NODE,			/* View node. Default mode of vty interface. */
  AUTH_ENABLE_NODE,		/* Authentication mode for change enable. */
  ENABLE_NODE,			/* Enable node. */
  CONFIG_NODE,			/* Config node. Default mode of config file. */
  SERVICE_NODE, 		/* Service node. */
  DEBUG_NODE,			/* Debug node. */
  AAA_NODE,			/* AAA node. */
  KEYCHAIN_NODE,		/* Key-chain node. */
  KEYCHAIN_KEY_NODE,		/* Key-chain key node. */
  INTERFACE_NODE,		/* Interface mode node. */
  ZEBRA_NODE,			/* zebra connection node. */
  TABLE_NODE,			/* rtm_table selection node. */
  RIP_NODE,			/* RIP protocol mode node. */ 
  RIPNG_NODE,			/* RIPng protocol mode node. */
  BGP_NODE,			/* BGP protocol mode which includes BGP4+ */
  BGP_VPNV4_NODE,		/* BGP MPLS-VPN PE exchange. */
  BGP_IPV4_NODE,		/* BGP IPv4 unicast address family.  */
  BGP_IPV4M_NODE,		/* BGP IPv4 multicast address family.  */
  BGP_IPV6_NODE,		/* BGP IPv6 address family */
  OSPF_NODE,			/* OSPF protocol mode */
  OSPF6_NODE,			/* OSPF protocol for IPv6 mode */
  ISIS_NODE,			/* ISIS protocol mode */
  MASC_NODE,			/* MASC for multicast.  */
  IRDP_NODE,			/* ICMP Router Discovery Protocol mode. */ 
  IP_NODE,			/* Static ip route node. */
  ACCESS_NODE,			/* Access list node. */
  PREFIX_NODE,			/* Prefix list node. */
  ACCESS_IPV6_NODE,		/* Access list node. */
  PREFIX_IPV6_NODE,		/* Prefix list node. */
  AS_LIST_NODE,			/* AS list node. */
  COMMUNITY_LIST_NODE,		/* Community list node. */
  RMAP_NODE,			/* Route map node. */
  SMUX_NODE,			/* SNMP configuration node. */
  DUMP_NODE,			/* Packet dump node. */
  FORWARDING_NODE,		/* IP forwarding node. */
  VTY_NODE			/* Vty node. */
};

/* Node which has some commands and prompt string and configuration
   function pointer . */
struct cmd_node 
{
  /* Node index. */
  enum node_type node;		

  /* Prompt character at vty interface. */
  const char *prompt;			

  /* Is this node's configuration goes to vtysh ? */
  int vtysh;
  
  /* Node's configuration write function */
  int (*func) (struct vty *);

  /* Vector of this node's command list. */
  vector cmd_vector;	
};

/* Structure of command element. */
struct cmd_element 
{
  const char *string;			/* Command specification by string. */
  int (*func) (struct cmd_element *, struct vty *, int, const char *[]);
  const char *doc;			/* Documentation of this command. */
  int daemon;                   /* Daemon to which this command belong. */
  vector strvec;		/* Pointing out each description vector. */
  unsigned int cmdsize;		/* Command index count. */
  char *config;			/* Configuration string */
  vector subconfig;		/* Sub configuration string */
};

/* Command description structure. */
struct desc
{
  const char *cmd;			/* Command string. */
  const char *str;			/* Command's description. */
};

/* Return value of the commands. */
#define CMD_SUCCESS              0
#define CMD_WARNING              1
#define CMD_ERR_NO_MATCH         2
#define CMD_ERR_AMBIGUOUS        3
#define CMD_ERR_INCOMPLETE       4
#define CMD_ERR_EXEED_ARGC_MAX   5
#define CMD_ERR_NOTHING_TODO     6
#define CMD_COMPLETE_FULL_MATCH  7
#define CMD_COMPLETE_MATCH       8
#define CMD_COMPLETE_LIST_MATCH  9
#define CMD_SUCCESS_DAEMON      10

/* Argc max counts. */
#define CMD_ARGC_MAX   25

/* Turn off these macros when uisng cpp with extract.pl */
#ifndef VTYSH_EXTRACT_PL  

/* DEFUN for vty command interafce. Little bit hacky ;-). */
#define DEFUN(funcname, cmdname, cmdstr, helpstr) \
  int funcname (struct cmd_element *, struct vty *, int, const char *[]); \
  struct cmd_element cmdname = \
  { \
    .string = cmdstr, \
    .func = funcname, \
    .doc = helpstr \
  }; \
  int funcname \
  (struct cmd_element *self, struct vty *vty, int argc, const char *argv[])

/* DEFUN_NOSH for commands that vtysh should ignore */
#define DEFUN_NOSH(funcname, cmdname, cmdstr, helpstr) \
  DEFUN(funcname, cmdname, cmdstr, helpstr)

/* DEFSH for vtysh. */
#define DEFSH(daemon, cmdname, cmdstr, helpstr) \
  struct cmd_element cmdname = \
  { \
    cmdstr, \
    NULL, \
    helpstr, \
    daemon \
  }; \

/* DEFUN + DEFSH */
#define DEFUNSH(daemon, funcname, cmdname, cmdstr, helpstr) \
  int funcname (struct cmd_element *, struct vty *, int, const char *[]); \
  struct cmd_element cmdname = \
  { \
    cmdstr, \
    funcname, \
    helpstr, \
    daemon \
  }; \
  int funcname \
  (struct cmd_element *self, struct vty *vty, int argc, const char *argv[])

/* ALIAS macro which define existing command's alias. */
#define ALIAS(funcname, cmdname, cmdstr, helpstr) \
  struct cmd_element cmdname = \
  { \
    cmdstr, \
    funcname, \
    helpstr \
  };

#endif /* VTYSH_EXTRACT_PL */

/* Some macroes */
#define CMD_OPTION(S)   ((S[0]) == '[')
#define CMD_VARIABLE(S) (((S[0]) >= 'A' && (S[0]) <= 'Z') || ((S[0]) == '<'))
#define CMD_VARARG(S)   ((S[0]) == '.')
#define CMD_RANGE(S)	((S[0] == '<'))

#define CMD_IPV4(S)	   ((strcmp ((S), "A.B.C.D") == 0))
#define CMD_IPV4_PREFIX(S) ((strcmp ((S), "A.B.C.D/M") == 0))
#define CMD_IPV6(S)        ((strcmp ((S), "X:X::X:X") == 0))
#define CMD_IPV6_PREFIX(S) ((strcmp ((S), "X:X::X:X/M") == 0))

/* Common descriptions. */
#define SHOW_STR "Show running system information\n"
#define IP_STR "IP information\n"
#define IPV6_STR "IPv6 information\n"
#define NO_STR "Negate a command or set its defaults\n"
#define CLEAR_STR "Reset functions\n"
#define RIP_STR "RIP information\n"
#define BGP_STR "BGP information\n"
#define OSPF_STR "OSPF information\n"
#define NEIGHBOR_STR "Specify neighbor router\n"
#define DEBUG_STR "Debugging functions (see also 'undebug')\n"
#define UNDEBUG_STR "Disable debugging functions (see also 'debug')\n"
#define ROUTER_STR "Enable a routing process\n"
#define AS_STR "AS number\n"
#define MBGP_STR "MBGP information\n"
#define MATCH_STR "Match values from routing table\n"
#define SET_STR "Set values in destination routing protocol\n"
#define OUT_STR "Filter outgoing routing updates\n"
#define IN_STR  "Filter incoming routing updates\n"
#define V4NOTATION_STR "specify by IPv4 address notation(e.g. 0.0.0.0)\n"
#define OSPF6_NUMBER_STR "Specify by number\n"
#define INTERFACE_STR "Interface infomation\n"
#define IFNAME_STR "Interface name(e.g. ep0)\n"
#define IP6_STR "IPv6 Information\n"
#define OSPF6_STR "Open Shortest Path First (OSPF) for IPv6\n"
#define OSPF6_ROUTER_STR "Enable a routing process\n"
#define OSPF6_INSTANCE_STR "<1-65535> Instance ID\n"
#define SECONDS_STR "<1-65535> Seconds\n"
#define ROUTE_STR "Routing Table\n"
#define PREFIX_LIST_STR "Build a prefix list\n"
#define OSPF6_DUMP_TYPE_LIST \
"(neighbor|interface|area|lsa|zebra|config|dbex|spf|route|lsdb|redistribute|hook|asbr|prefix|abr)"
#define ISIS_STR "IS-IS information\n"
#define AREA_TAG_STR "[area tag]\n"

#define CONF_BACKUP_EXT ".sav"

/* IPv4 only machine should not accept IPv6 address for peer's IP
   address.  So we replace VTY command string like below. */
#ifdef HAVE_IPV6
#define NEIGHBOR_CMD       "neighbor (A.B.C.D|X:X::X:X) "
#define NO_NEIGHBOR_CMD    "no neighbor (A.B.C.D|X:X::X:X) "
#define NEIGHBOR_ADDR_STR  "Neighbor address\nIPv6 address\n"
#define NEIGHBOR_CMD2      "neighbor (A.B.C.D|X:X::X:X|WORD) "
#define NO_NEIGHBOR_CMD2   "no neighbor (A.B.C.D|X:X::X:X|WORD) "
#define NEIGHBOR_ADDR_STR2 "Neighbor address\nNeighbor IPv6 address\nNeighbor tag\n"
#else
#define NEIGHBOR_CMD       "neighbor A.B.C.D "
#define NO_NEIGHBOR_CMD    "no neighbor A.B.C.D "
#define NEIGHBOR_ADDR_STR  "Neighbor address\n"
#define NEIGHBOR_CMD2      "neighbor (A.B.C.D|WORD) "
#define NO_NEIGHBOR_CMD2   "no neighbor (A.B.C.D|WORD) "
#define NEIGHBOR_ADDR_STR2 "Neighbor address\nNeighbor tag\n"
#endif /* HAVE_IPV6 */

/* Prototypes. */
void install_node (struct cmd_node *, int (*) (struct vty *));
void install_default (enum node_type);
void install_element (enum node_type, struct cmd_element *);
void sort_node ();

char *argv_concat (const char **, int, int);
vector cmd_make_strvec (const char *);
void cmd_free_strvec (vector);
vector cmd_describe_command ();
char **cmd_complete_command ();
const char *cmd_prompt (enum node_type);
int config_from_file (struct vty *, FILE *);
int cmd_execute_command (vector, struct vty *, struct cmd_element **);
int cmd_execute_command_strict (vector, struct vty *, struct cmd_element **);
void config_replace_string (struct cmd_element *, char *, ...);
void cmd_init (int);

/* Export typical functions. */
extern struct cmd_element config_end_cmd;
extern struct cmd_element config_exit_cmd;
extern struct cmd_element config_quit_cmd;
extern struct cmd_element config_help_cmd;
extern struct cmd_element config_list_cmd;
int config_exit (struct cmd_element *, struct vty *, int, const char *[]);
int config_help (struct cmd_element *, struct vty *, int, const char *[]);
char *host_config_file ();
void host_config_set (char *);

#endif /* _ZEBRA_COMMAND_H */
Commit	Line	Data
718e3744	1	/*
	2	* Zebra configuration command interface routine
	3	* Copyright (C) 1997, 98 Kunihiro Ishiguro
	4	*
	5	* This file is part of GNU Zebra.
	6	*
	7	* GNU Zebra is free software; you can redistribute it and/or modify
	8	* it under the terms of the GNU General Public License as published
	9	* by the Free Software Foundation; either version 2, or (at your
	10	* option) any later version.
	11	*
	12	* GNU Zebra is distributed in the hope that it will be useful, but
	13	* WITHOUT ANY WARRANTY; without even the implied warranty of
	14	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
	15	* General Public License for more details.
	16	*
	17	* You should have received a copy of the GNU General Public License
	18	* along with GNU Zebra; see the file COPYING. If not, write to the
	19	* Free Software Foundation, Inc., 59 Temple Place - Suite 330,
	20	* Boston, MA 02111-1307, USA.
	21	*/
	22
	23	#ifndef _ZEBRA_COMMAND_H
	24	#define _ZEBRA_COMMAND_H
	25
	26	#include "vector.h"
	27	#include "vty.h"
	28
	29	/* Host configuration variable */
	30	struct host
	31	{
	32	/* Host name of this router. */
	33	char *name;
	34
	35	/* Password for vty interface. */
	36	char *password;
	37	char *password_encrypt;
	38
	39	/* Enable password */
	40	char *enable;
	41	char *enable_encrypt;
	42
	43	/* System wide terminal lines. */
	44	int lines;
	45
	46	/* Log filename. */
	47	char *logfile;
	48
	49	/* Log stdout. */
	50	u_char log_stdout;
	51
	52	/* Log syslog. */
	53	u_char log_syslog;
	54
	55	/* config file name of this host */
	56	char *config;
	57
	58	/* Flags for services */
	59	int advanced;
	60	int encrypt;
	61
	62	/* Banner configuration. */
8c328f11	63	const char *motd;
718e3744	64	};
	65
	66	/* There are some command levels which called from command node. */
	67	enum node_type
	68	{
	69	AUTH_NODE, /* Authentication mode of vty interface. */
	70	VIEW_NODE, /* View node. Default mode of vty interface. */
	71	AUTH_ENABLE_NODE, /* Authentication mode for change enable. */
	72	ENABLE_NODE, /* Enable node. */
	73	CONFIG_NODE, /* Config node. Default mode of config file. */
e7168df4	74	SERVICE_NODE, /* Service node. */
718e3744	75	DEBUG_NODE, /* Debug node. */
	76	AAA_NODE, /* AAA node. */
	77	KEYCHAIN_NODE, /* Key-chain node. */
	78	KEYCHAIN_KEY_NODE, /* Key-chain key node. */
	79	INTERFACE_NODE, /* Interface mode node. */
	80	ZEBRA_NODE, /* zebra connection node. */
	81	TABLE_NODE, /* rtm_table selection node. */
	82	RIP_NODE, /* RIP protocol mode node. */
	83	RIPNG_NODE, /* RIPng protocol mode node. */
	84	BGP_NODE, /* BGP protocol mode which includes BGP4+ */
	85	BGP_VPNV4_NODE, /* BGP MPLS-VPN PE exchange. */
	86	BGP_IPV4_NODE, /* BGP IPv4 unicast address family. */
	87	BGP_IPV4M_NODE, /* BGP IPv4 multicast address family. */
	88	BGP_IPV6_NODE, /* BGP IPv6 address family */
	89	OSPF_NODE, /* OSPF protocol mode */
	90	OSPF6_NODE, /* OSPF protocol for IPv6 mode */
9e867fe6	91	ISIS_NODE, /* ISIS protocol mode */
718e3744	92	MASC_NODE, /* MASC for multicast. */
	93	IRDP_NODE, /* ICMP Router Discovery Protocol mode. */
	94	IP_NODE, /* Static ip route node. */
	95	ACCESS_NODE, /* Access list node. */
	96	PREFIX_NODE, /* Prefix list node. */
	97	ACCESS_IPV6_NODE, /* Access list node. */
	98	PREFIX_IPV6_NODE, /* Prefix list node. */
	99	AS_LIST_NODE, /* AS list node. */
	100	COMMUNITY_LIST_NODE, /* Community list node. */
	101	RMAP_NODE, /* Route map node. */
	102	SMUX_NODE, /* SNMP configuration node. */
	103	DUMP_NODE, /* Packet dump node. */
	104	FORWARDING_NODE, /* IP forwarding node. */
	105	VTY_NODE /* Vty node. */
	106	};
	107
	108	/* Node which has some commands and prompt string and configuration
	109	function pointer . */
	110	struct cmd_node
	111	{
	112	/* Node index. */
	113	enum node_type node;
	114
	115	/* Prompt character at vty interface. */
8c328f11	116	const char *prompt;
718e3744	117
	118	/* Is this node's configuration goes to vtysh ? */
	119	int vtysh;
	120
	121	/* Node's configuration write function */
	122	int (func) (struct vty );
	123
	124	/* Vector of this node's command list. */
	125	vector cmd_vector;
	126	};
	127
	128	/* Structure of command element. */
	129	struct cmd_element
	130	{
8c328f11	131	const char string; / Command specification by string. */
9035efaa	132	int (func) (struct cmd_element , struct vty , int, const char []);
8c328f11	133	const char doc; / Documentation of this command. */
718e3744	134	int daemon; /* Daemon to which this command belong. */
718e3744	135	vector strvec; /* Pointing out each description vector. */
8c328f11	136	unsigned int cmdsize; /* Command index count. */
718e3744	137	char config; / Configuration string */
	138	vector subconfig; /* Sub configuration string */
	139	};
	140
	141	/* Command description structure. */
	142	struct desc
	143	{
8c328f11	144	const char cmd; / Command string. */
8c328f11	145	const char str; / Command's description. */
718e3744	146	};
	147
	148	/* Return value of the commands. */
	149	#define CMD_SUCCESS 0
	150	#define CMD_WARNING 1
	151	#define CMD_ERR_NO_MATCH 2
	152	#define CMD_ERR_AMBIGUOUS 3
	153	#define CMD_ERR_INCOMPLETE 4
	154	#define CMD_ERR_EXEED_ARGC_MAX 5
	155	#define CMD_ERR_NOTHING_TODO 6
	156	#define CMD_COMPLETE_FULL_MATCH 7
	157	#define CMD_COMPLETE_MATCH 8
	158	#define CMD_COMPLETE_LIST_MATCH 9
	159	#define CMD_SUCCESS_DAEMON 10
	160
	161	/* Argc max counts. */
	162	#define CMD_ARGC_MAX 25
	163
	164	/* Turn off these macros when uisng cpp with extract.pl */
	165	#ifndef VTYSH_EXTRACT_PL
	166
	167	/* DEFUN for vty command interafce. Little bit hacky ;-). */
	168	#define DEFUN(funcname, cmdname, cmdstr, helpstr) \
9035efaa	169	int funcname (struct cmd_element , struct vty , int, const char *[]); \
718e3744	170	struct cmd_element cmdname = \
718e3744	171	{ \
9035efaa	172	.string = cmdstr, \
	173	.func = funcname, \
	174	.doc = helpstr \
718e3744	175	}; \
718e3744	176	int funcname \
9035efaa	177	(struct cmd_element self, struct vty vty, int argc, const char *argv[])
718e3744	178
	179	/* DEFUN_NOSH for commands that vtysh should ignore */
	180	#define DEFUN_NOSH(funcname, cmdname, cmdstr, helpstr) \
	181	DEFUN(funcname, cmdname, cmdstr, helpstr)
	182
	183	/* DEFSH for vtysh. */
	184	#define DEFSH(daemon, cmdname, cmdstr, helpstr) \
	185	struct cmd_element cmdname = \
	186	{ \
	187	cmdstr, \
	188	NULL, \
	189	helpstr, \
	190	daemon \
	191	}; \
	192
	193	/* DEFUN + DEFSH */
	194	#define DEFUNSH(daemon, funcname, cmdname, cmdstr, helpstr) \
a149411b	195	int funcname (struct cmd_element , struct vty , int, const char *[]); \
718e3744	196	struct cmd_element cmdname = \
	197	{ \
	198	cmdstr, \
	199	funcname, \
	200	helpstr, \
	201	daemon \
	202	}; \
	203	int funcname \
a149411b	204	(struct cmd_element self, struct vty vty, int argc, const char *argv[])
718e3744	205
	206	/* ALIAS macro which define existing command's alias. */
	207	#define ALIAS(funcname, cmdname, cmdstr, helpstr) \
	208	struct cmd_element cmdname = \
	209	{ \
	210	cmdstr, \
	211	funcname, \
	212	helpstr \
	213	};
	214
	215	#endif /* VTYSH_EXTRACT_PL */
	216
	217	/* Some macroes */
	218	#define CMD_OPTION(S) ((S[0]) == '[')
	219	#define CMD_VARIABLE(S) (((S[0]) >= 'A' && (S[0]) <= 'Z') \|\| ((S[0]) == '<'))
	220	#define CMD_VARARG(S) ((S[0]) == '.')
	221	#define CMD_RANGE(S) ((S[0] == '<'))
	222
	223	#define CMD_IPV4(S) ((strcmp ((S), "A.B.C.D") == 0))
	224	#define CMD_IPV4_PREFIX(S) ((strcmp ((S), "A.B.C.D/M") == 0))
	225	#define CMD_IPV6(S) ((strcmp ((S), "X:X::X:X") == 0))
	226	#define CMD_IPV6_PREFIX(S) ((strcmp ((S), "X:X::X:X/M") == 0))
	227
	228	/* Common descriptions. */
	229	#define SHOW_STR "Show running system information\n"
	230	#define IP_STR "IP information\n"
	231	#define IPV6_STR "IPv6 information\n"
	232	#define NO_STR "Negate a command or set its defaults\n"
	233	#define CLEAR_STR "Reset functions\n"
	234	#define RIP_STR "RIP information\n"
	235	#define BGP_STR "BGP information\n"
	236	#define OSPF_STR "OSPF information\n"
	237	#define NEIGHBOR_STR "Specify neighbor router\n"
	238	#define DEBUG_STR "Debugging functions (see also 'undebug')\n"
	239	#define UNDEBUG_STR "Disable debugging functions (see also 'debug')\n"
	240	#define ROUTER_STR "Enable a routing process\n"
	241	#define AS_STR "AS number\n"
	242	#define MBGP_STR "MBGP information\n"
	243	#define MATCH_STR "Match values from routing table\n"
	244	#define SET_STR "Set values in destination routing protocol\n"
	245	#define OUT_STR "Filter outgoing routing updates\n"
	246	#define IN_STR "Filter incoming routing updates\n"
	247	#define V4NOTATION_STR "specify by IPv4 address notation(e.g. 0.0.0.0)\n"
	248	#define OSPF6_NUMBER_STR "Specify by number\n"
	249	#define INTERFACE_STR "Interface infomation\n"
	250	#define IFNAME_STR "Interface name(e.g. ep0)\n"
	251	#define IP6_STR "IPv6 Information\n"
	252	#define OSPF6_STR "Open Shortest Path First (OSPF) for IPv6\n"
	253	#define OSPF6_ROUTER_STR "Enable a routing process\n"
	254	#define OSPF6_INSTANCE_STR "<1-65535> Instance ID\n"
	255	#define SECONDS_STR "<1-65535> Seconds\n"
	256	#define ROUTE_STR "Routing Table\n"
	257	#define PREFIX_LIST_STR "Build a prefix list\n"
	258	#define OSPF6_DUMP_TYPE_LIST \
	259	"(neighbor\|interface\|area\|lsa\|zebra\|config\|dbex\|spf\|route\|lsdb\|redistribute\|hook\|asbr\|prefix\|abr)"
9e867fe6	260	#define ISIS_STR "IS-IS information\n"
9e867fe6	261	#define AREA_TAG_STR "[area tag]\n"
718e3744	262
	263	#define CONF_BACKUP_EXT ".sav"
	264
	265	/* IPv4 only machine should not accept IPv6 address for peer's IP
	266	address. So we replace VTY command string like below. */
	267	#ifdef HAVE_IPV6
	268	#define NEIGHBOR_CMD "neighbor (A.B.C.D\|X:X::X:X) "
	269	#define NO_NEIGHBOR_CMD "no neighbor (A.B.C.D\|X:X::X:X) "
	270	#define NEIGHBOR_ADDR_STR "Neighbor address\nIPv6 address\n"
	271	#define NEIGHBOR_CMD2 "neighbor (A.B.C.D\|X:X::X:X\|WORD) "
	272	#define NO_NEIGHBOR_CMD2 "no neighbor (A.B.C.D\|X:X::X:X\|WORD) "
	273	#define NEIGHBOR_ADDR_STR2 "Neighbor address\nNeighbor IPv6 address\nNeighbor tag\n"
	274	#else
	275	#define NEIGHBOR_CMD "neighbor A.B.C.D "
	276	#define NO_NEIGHBOR_CMD "no neighbor A.B.C.D "
	277	#define NEIGHBOR_ADDR_STR "Neighbor address\n"
	278	#define NEIGHBOR_CMD2 "neighbor (A.B.C.D\|WORD) "
	279	#define NO_NEIGHBOR_CMD2 "no neighbor (A.B.C.D\|WORD) "
	280	#define NEIGHBOR_ADDR_STR2 "Neighbor address\nNeighbor tag\n"
	281	#endif /* HAVE_IPV6 */
	282
	283	/* Prototypes. */
	284	void install_node (struct cmd_node , int () (struct vty *));
	285	void install_default (enum node_type);
	286	void install_element (enum node_type, struct cmd_element *);
	287	void sort_node ();
	288
42d49865	289	char argv_concat (const char *, int, int);
ea8e9d97	290	vector cmd_make_strvec (const char *);
718e3744	291	void cmd_free_strvec (vector);
	292	vector cmd_describe_command ();
	293	char **cmd_complete_command ();
8c328f11	294	const char *cmd_prompt (enum node_type);
718e3744	295	int config_from_file (struct vty , FILE );
	296	int cmd_execute_command (vector, struct vty , struct cmd_element *);
	297	int cmd_execute_command_strict (vector, struct vty , struct cmd_element *);
	298	void config_replace_string (struct cmd_element , char , ...);
	299	void cmd_init (int);
	300
	301	/* Export typical functions. */
	302	extern struct cmd_element config_end_cmd;
	303	extern struct cmd_element config_exit_cmd;
	304	extern struct cmd_element config_quit_cmd;
	305	extern struct cmd_element config_help_cmd;
	306	extern struct cmd_element config_list_cmd;
9035efaa	307	int config_exit (struct cmd_element , struct vty , int, const char *[]);
9035efaa	308	int config_help (struct cmd_element , struct vty , int, const char *[]);
718e3744	309	char *host_config_file ();
	310	void host_config_set (char *);
	311
	312	#endif /* _ZEBRA_COMMAND_H */