]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* -*- linux-c -*- |
2 | * INET 802.1Q VLAN | |
3 | * Ethernet-type device handling. | |
4 | * | |
5 | * Authors: Ben Greear <greearb@candelatech.com> | |
6 | * Please send support related email to: vlan@scry.wanfear.com | |
7 | * VLAN Home Page: http://www.candelatech.com/~greear/vlan.html | |
8 | * | |
9 | * Fixes: Mar 22 2001: Martin Bokaemper <mbokaemper@unispherenetworks.com> | |
10 | * - reset skb->pkt_type on incoming packets when MAC was changed | |
11 | * - see that changed MAC is saddr for outgoing packets | |
12 | * Oct 20, 2001: Ard van Breeman: | |
13 | * - Fix MC-list, finally. | |
14 | * - Flush MC-list on VLAN destroy. | |
15 | * | |
16 | * | |
17 | * This program is free software; you can redistribute it and/or | |
18 | * modify it under the terms of the GNU General Public License | |
19 | * as published by the Free Software Foundation; either version | |
20 | * 2 of the License, or (at your option) any later version. | |
21 | */ | |
22 | ||
23 | #include <linux/module.h> | |
24 | #include <linux/mm.h> | |
25 | #include <linux/in.h> | |
26 | #include <linux/init.h> | |
27 | #include <asm/uaccess.h> /* for copy_from_user */ | |
28 | #include <linux/skbuff.h> | |
29 | #include <linux/netdevice.h> | |
30 | #include <linux/etherdevice.h> | |
31 | #include <net/datalink.h> | |
32 | #include <net/p8022.h> | |
33 | #include <net/arp.h> | |
34 | ||
35 | #include "vlan.h" | |
36 | #include "vlanproc.h" | |
37 | #include <linux/if_vlan.h> | |
38 | #include <net/ip.h> | |
39 | ||
40 | /* | |
41 | * Rebuild the Ethernet MAC header. This is called after an ARP | |
42 | * (or in future other address resolution) has completed on this | |
43 | * sk_buff. We now let ARP fill in the other fields. | |
44 | * | |
45 | * This routine CANNOT use cached dst->neigh! | |
46 | * Really, it is used only when dst->neigh is wrong. | |
47 | * | |
48 | * TODO: This needs a checkup, I'm ignorant here. --BLG | |
49 | */ | |
50 | int vlan_dev_rebuild_header(struct sk_buff *skb) | |
51 | { | |
52 | struct net_device *dev = skb->dev; | |
53 | struct vlan_ethhdr *veth = (struct vlan_ethhdr *)(skb->data); | |
54 | ||
55 | switch (veth->h_vlan_encapsulated_proto) { | |
56 | #ifdef CONFIG_INET | |
57 | case __constant_htons(ETH_P_IP): | |
58 | ||
59 | /* TODO: Confirm this will work with VLAN headers... */ | |
60 | return arp_find(veth->h_dest, skb); | |
61 | #endif | |
62 | default: | |
63 | printk(VLAN_DBG | |
64 | "%s: unable to resolve type %X addresses.\n", | |
65 | dev->name, (int)veth->h_vlan_encapsulated_proto); | |
66 | ||
67 | memcpy(veth->h_source, dev->dev_addr, ETH_ALEN); | |
68 | break; | |
69 | }; | |
70 | ||
71 | return 0; | |
72 | } | |
73 | ||
74 | static inline struct sk_buff *vlan_check_reorder_header(struct sk_buff *skb) | |
75 | { | |
76 | if (VLAN_DEV_INFO(skb->dev)->flags & 1) { | |
77 | if (skb_shared(skb) || skb_cloned(skb)) { | |
78 | struct sk_buff *nskb = skb_copy(skb, GFP_ATOMIC); | |
79 | kfree_skb(skb); | |
80 | skb = nskb; | |
81 | } | |
82 | if (skb) { | |
83 | /* Lifted from Gleb's VLAN code... */ | |
84 | memmove(skb->data - ETH_HLEN, | |
85 | skb->data - VLAN_ETH_HLEN, 12); | |
86 | skb->mac.raw += VLAN_HLEN; | |
87 | } | |
88 | } | |
89 | ||
90 | return skb; | |
91 | } | |
92 | ||
93 | /* | |
94 | * Determine the packet's protocol ID. The rule here is that we | |
95 | * assume 802.3 if the type field is short enough to be a length. | |
96 | * This is normal practice and works for any 'now in use' protocol. | |
97 | * | |
98 | * Also, at this point we assume that we ARE dealing exclusively with | |
99 | * VLAN packets, or packets that should be made into VLAN packets based | |
100 | * on a default VLAN ID. | |
101 | * | |
102 | * NOTE: Should be similar to ethernet/eth.c. | |
103 | * | |
104 | * SANITY NOTE: This method is called when a packet is moving up the stack | |
105 | * towards userland. To get here, it would have already passed | |
106 | * through the ethernet/eth.c eth_type_trans() method. | |
107 | * SANITY NOTE 2: We are referencing to the VLAN_HDR frields, which MAY be | |
108 | * stored UNALIGNED in the memory. RISC systems don't like | |
109 | * such cases very much... | |
110 | * SANITY NOTE 2a: According to Dave Miller & Alexey, it will always be aligned, | |
111 | * so there doesn't need to be any of the unaligned stuff. It has | |
112 | * been commented out now... --Ben | |
113 | * | |
114 | */ | |
115 | int vlan_skb_recv(struct sk_buff *skb, struct net_device *dev, | |
f2ccd8fa | 116 | struct packet_type* ptype, struct net_device *orig_dev) |
1da177e4 LT |
117 | { |
118 | unsigned char *rawp = NULL; | |
119 | struct vlan_hdr *vhdr = (struct vlan_hdr *)(skb->data); | |
120 | unsigned short vid; | |
121 | struct net_device_stats *stats; | |
122 | unsigned short vlan_TCI; | |
3c3f8f25 | 123 | __be16 proto; |
1da177e4 LT |
124 | |
125 | /* vlan_TCI = ntohs(get_unaligned(&vhdr->h_vlan_TCI)); */ | |
126 | vlan_TCI = ntohs(vhdr->h_vlan_TCI); | |
127 | ||
128 | vid = (vlan_TCI & VLAN_VID_MASK); | |
129 | ||
130 | #ifdef VLAN_DEBUG | |
131 | printk(VLAN_DBG "%s: skb: %p vlan_id: %hx\n", | |
132 | __FUNCTION__, skb, vid); | |
133 | #endif | |
134 | ||
135 | /* Ok, we will find the correct VLAN device, strip the header, | |
136 | * and then go on as usual. | |
137 | */ | |
138 | ||
139 | /* We have 12 bits of vlan ID. | |
140 | * | |
141 | * We must not drop allow preempt until we hold a | |
142 | * reference to the device (netif_rx does that) or we | |
143 | * fail. | |
144 | */ | |
145 | ||
146 | rcu_read_lock(); | |
147 | skb->dev = __find_vlan_dev(dev, vid); | |
148 | if (!skb->dev) { | |
149 | rcu_read_unlock(); | |
150 | ||
151 | #ifdef VLAN_DEBUG | |
152 | printk(VLAN_DBG "%s: ERROR: No net_device for VID: %i on dev: %s [%i]\n", | |
153 | __FUNCTION__, (unsigned int)(vid), dev->name, dev->ifindex); | |
154 | #endif | |
155 | kfree_skb(skb); | |
156 | return -1; | |
157 | } | |
158 | ||
159 | skb->dev->last_rx = jiffies; | |
160 | ||
161 | /* Bump the rx counters for the VLAN device. */ | |
162 | stats = vlan_dev_get_stats(skb->dev); | |
163 | stats->rx_packets++; | |
164 | stats->rx_bytes += skb->len; | |
165 | ||
166 | skb_pull(skb, VLAN_HLEN); /* take off the VLAN header (4 bytes currently) */ | |
167 | ||
a388442c SH |
168 | /* Need to correct hardware checksum */ |
169 | skb_postpull_rcsum(skb, vhdr, VLAN_HLEN); | |
170 | ||
1da177e4 LT |
171 | /* Ok, lets check to make sure the device (dev) we |
172 | * came in on is what this VLAN is attached to. | |
173 | */ | |
174 | ||
175 | if (dev != VLAN_DEV_INFO(skb->dev)->real_dev) { | |
176 | rcu_read_unlock(); | |
177 | ||
178 | #ifdef VLAN_DEBUG | |
179 | printk(VLAN_DBG "%s: dropping skb: %p because came in on wrong device, dev: %s real_dev: %s, skb_dev: %s\n", | |
180 | __FUNCTION__, skb, dev->name, | |
181 | VLAN_DEV_INFO(skb->dev)->real_dev->name, | |
182 | skb->dev->name); | |
183 | #endif | |
184 | kfree_skb(skb); | |
185 | stats->rx_errors++; | |
186 | return -1; | |
187 | } | |
188 | ||
189 | /* | |
190 | * Deal with ingress priority mapping. | |
191 | */ | |
192 | skb->priority = vlan_get_ingress_priority(skb->dev, ntohs(vhdr->h_vlan_TCI)); | |
193 | ||
194 | #ifdef VLAN_DEBUG | |
195 | printk(VLAN_DBG "%s: priority: %lu for TCI: %hu (hbo)\n", | |
196 | __FUNCTION__, (unsigned long)(skb->priority), | |
197 | ntohs(vhdr->h_vlan_TCI)); | |
198 | #endif | |
199 | ||
200 | /* The ethernet driver already did the pkt_type calculations | |
201 | * for us... | |
202 | */ | |
203 | switch (skb->pkt_type) { | |
204 | case PACKET_BROADCAST: /* Yeah, stats collect these together.. */ | |
205 | // stats->broadcast ++; // no such counter :-( | |
206 | break; | |
207 | ||
208 | case PACKET_MULTICAST: | |
209 | stats->multicast++; | |
210 | break; | |
211 | ||
212 | case PACKET_OTHERHOST: | |
213 | /* Our lower layer thinks this is not local, let's make sure. | |
214 | * This allows the VLAN to have a different MAC than the underlying | |
215 | * device, and still route correctly. | |
216 | */ | |
217 | if (memcmp(eth_hdr(skb)->h_dest, skb->dev->dev_addr, ETH_ALEN) == 0) { | |
218 | /* It is for our (changed) MAC-address! */ | |
219 | skb->pkt_type = PACKET_HOST; | |
220 | } | |
221 | break; | |
222 | default: | |
223 | break; | |
224 | }; | |
225 | ||
226 | /* Was a VLAN packet, grab the encapsulated protocol, which the layer | |
227 | * three protocols care about. | |
228 | */ | |
229 | /* proto = get_unaligned(&vhdr->h_vlan_encapsulated_proto); */ | |
230 | proto = vhdr->h_vlan_encapsulated_proto; | |
231 | ||
232 | skb->protocol = proto; | |
233 | if (ntohs(proto) >= 1536) { | |
234 | /* place it back on the queue to be handled by | |
235 | * true layer 3 protocols. | |
236 | */ | |
237 | ||
238 | /* See if we are configured to re-write the VLAN header | |
239 | * to make it look like ethernet... | |
240 | */ | |
241 | skb = vlan_check_reorder_header(skb); | |
242 | ||
243 | /* Can be null if skb-clone fails when re-ordering */ | |
244 | if (skb) { | |
245 | netif_rx(skb); | |
246 | } else { | |
247 | /* TODO: Add a more specific counter here. */ | |
248 | stats->rx_errors++; | |
249 | } | |
250 | rcu_read_unlock(); | |
251 | return 0; | |
252 | } | |
253 | ||
254 | rawp = skb->data; | |
255 | ||
256 | /* | |
257 | * This is a magic hack to spot IPX packets. Older Novell breaks | |
258 | * the protocol design and runs IPX over 802.3 without an 802.2 LLC | |
259 | * layer. We look for FFFF which isn't a used 802.2 SSAP/DSAP. This | |
260 | * won't work for fault tolerant netware but does for the rest. | |
261 | */ | |
262 | if (*(unsigned short *)rawp == 0xFFFF) { | |
263 | skb->protocol = __constant_htons(ETH_P_802_3); | |
264 | /* place it back on the queue to be handled by true layer 3 protocols. | |
265 | */ | |
266 | ||
267 | /* See if we are configured to re-write the VLAN header | |
268 | * to make it look like ethernet... | |
269 | */ | |
270 | skb = vlan_check_reorder_header(skb); | |
271 | ||
272 | /* Can be null if skb-clone fails when re-ordering */ | |
273 | if (skb) { | |
274 | netif_rx(skb); | |
275 | } else { | |
276 | /* TODO: Add a more specific counter here. */ | |
277 | stats->rx_errors++; | |
278 | } | |
279 | rcu_read_unlock(); | |
280 | return 0; | |
281 | } | |
282 | ||
283 | /* | |
284 | * Real 802.2 LLC | |
285 | */ | |
286 | skb->protocol = __constant_htons(ETH_P_802_2); | |
287 | /* place it back on the queue to be handled by upper layer protocols. | |
288 | */ | |
289 | ||
290 | /* See if we are configured to re-write the VLAN header | |
291 | * to make it look like ethernet... | |
292 | */ | |
293 | skb = vlan_check_reorder_header(skb); | |
294 | ||
295 | /* Can be null if skb-clone fails when re-ordering */ | |
296 | if (skb) { | |
297 | netif_rx(skb); | |
298 | } else { | |
299 | /* TODO: Add a more specific counter here. */ | |
300 | stats->rx_errors++; | |
301 | } | |
302 | rcu_read_unlock(); | |
303 | return 0; | |
304 | } | |
305 | ||
306 | static inline unsigned short vlan_dev_get_egress_qos_mask(struct net_device* dev, | |
307 | struct sk_buff* skb) | |
308 | { | |
309 | struct vlan_priority_tci_mapping *mp = | |
310 | VLAN_DEV_INFO(dev)->egress_priority_map[(skb->priority & 0xF)]; | |
311 | ||
312 | while (mp) { | |
313 | if (mp->priority == skb->priority) { | |
314 | return mp->vlan_qos; /* This should already be shifted to mask | |
315 | * correctly with the VLAN's TCI | |
316 | */ | |
317 | } | |
318 | mp = mp->next; | |
319 | } | |
320 | return 0; | |
321 | } | |
322 | ||
323 | /* | |
324 | * Create the VLAN header for an arbitrary protocol layer | |
325 | * | |
326 | * saddr=NULL means use device source address | |
327 | * daddr=NULL means leave destination address (eg unresolved arp) | |
328 | * | |
329 | * This is called when the SKB is moving down the stack towards the | |
330 | * physical devices. | |
331 | */ | |
332 | int vlan_dev_hard_header(struct sk_buff *skb, struct net_device *dev, | |
333 | unsigned short type, void *daddr, void *saddr, | |
334 | unsigned len) | |
335 | { | |
336 | struct vlan_hdr *vhdr; | |
337 | unsigned short veth_TCI = 0; | |
338 | int rc = 0; | |
339 | int build_vlan_header = 0; | |
340 | struct net_device *vdev = dev; /* save this for the bottom of the method */ | |
341 | ||
342 | #ifdef VLAN_DEBUG | |
343 | printk(VLAN_DBG "%s: skb: %p type: %hx len: %x vlan_id: %hx, daddr: %p\n", | |
344 | __FUNCTION__, skb, type, len, VLAN_DEV_INFO(dev)->vlan_id, daddr); | |
345 | #endif | |
346 | ||
347 | /* build vlan header only if re_order_header flag is NOT set. This | |
348 | * fixes some programs that get confused when they see a VLAN device | |
349 | * sending a frame that is VLAN encoded (the consensus is that the VLAN | |
350 | * device should look completely like an Ethernet device when the | |
351 | * REORDER_HEADER flag is set) The drawback to this is some extra | |
352 | * header shuffling in the hard_start_xmit. Users can turn off this | |
353 | * REORDER behaviour with the vconfig tool. | |
354 | */ | |
355 | build_vlan_header = ((VLAN_DEV_INFO(dev)->flags & 1) == 0); | |
356 | ||
357 | if (build_vlan_header) { | |
358 | vhdr = (struct vlan_hdr *) skb_push(skb, VLAN_HLEN); | |
359 | ||
360 | /* build the four bytes that make this a VLAN header. */ | |
361 | ||
362 | /* Now, construct the second two bytes. This field looks something | |
363 | * like: | |
364 | * usr_priority: 3 bits (high bits) | |
365 | * CFI 1 bit | |
366 | * VLAN ID 12 bits (low bits) | |
367 | * | |
368 | */ | |
369 | veth_TCI = VLAN_DEV_INFO(dev)->vlan_id; | |
370 | veth_TCI |= vlan_dev_get_egress_qos_mask(dev, skb); | |
371 | ||
372 | vhdr->h_vlan_TCI = htons(veth_TCI); | |
373 | ||
374 | /* | |
375 | * Set the protocol type. | |
376 | * For a packet of type ETH_P_802_3 we put the length in here instead. | |
377 | * It is up to the 802.2 layer to carry protocol information. | |
378 | */ | |
379 | ||
380 | if (type != ETH_P_802_3) { | |
381 | vhdr->h_vlan_encapsulated_proto = htons(type); | |
382 | } else { | |
383 | vhdr->h_vlan_encapsulated_proto = htons(len); | |
384 | } | |
385 | } | |
386 | ||
387 | /* Before delegating work to the lower layer, enter our MAC-address */ | |
388 | if (saddr == NULL) | |
389 | saddr = dev->dev_addr; | |
390 | ||
391 | dev = VLAN_DEV_INFO(dev)->real_dev; | |
392 | ||
393 | /* MPLS can send us skbuffs w/out enough space. This check will grow the | |
394 | * skb if it doesn't have enough headroom. Not a beautiful solution, so | |
395 | * I'll tick a counter so that users can know it's happening... If they | |
396 | * care... | |
397 | */ | |
398 | ||
399 | /* NOTE: This may still break if the underlying device is not the final | |
400 | * device (and thus there are more headers to add...) It should work for | |
401 | * good-ole-ethernet though. | |
402 | */ | |
403 | if (skb_headroom(skb) < dev->hard_header_len) { | |
404 | struct sk_buff *sk_tmp = skb; | |
405 | skb = skb_realloc_headroom(sk_tmp, dev->hard_header_len); | |
406 | kfree_skb(sk_tmp); | |
407 | if (skb == NULL) { | |
408 | struct net_device_stats *stats = vlan_dev_get_stats(vdev); | |
409 | stats->tx_dropped++; | |
410 | return -ENOMEM; | |
411 | } | |
412 | VLAN_DEV_INFO(vdev)->cnt_inc_headroom_on_tx++; | |
413 | #ifdef VLAN_DEBUG | |
414 | printk(VLAN_DBG "%s: %s: had to grow skb.\n", __FUNCTION__, vdev->name); | |
415 | #endif | |
416 | } | |
417 | ||
418 | if (build_vlan_header) { | |
419 | /* Now make the underlying real hard header */ | |
420 | rc = dev->hard_header(skb, dev, ETH_P_8021Q, daddr, saddr, len + VLAN_HLEN); | |
421 | ||
422 | if (rc > 0) { | |
423 | rc += VLAN_HLEN; | |
424 | } else if (rc < 0) { | |
425 | rc -= VLAN_HLEN; | |
426 | } | |
427 | } else { | |
428 | /* If here, then we'll just make a normal looking ethernet frame, | |
429 | * but, the hard_start_xmit method will insert the tag (it has to | |
430 | * be able to do this for bridged and other skbs that don't come | |
431 | * down the protocol stack in an orderly manner. | |
432 | */ | |
433 | rc = dev->hard_header(skb, dev, type, daddr, saddr, len); | |
434 | } | |
435 | ||
436 | return rc; | |
437 | } | |
438 | ||
439 | int vlan_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) | |
440 | { | |
441 | struct net_device_stats *stats = vlan_dev_get_stats(dev); | |
442 | struct vlan_ethhdr *veth = (struct vlan_ethhdr *)(skb->data); | |
443 | ||
444 | /* Handle non-VLAN frames if they are sent to us, for example by DHCP. | |
445 | * | |
446 | * NOTE: THIS ASSUMES DIX ETHERNET, SPECIFICALLY NOT SUPPORTING | |
447 | * OTHER THINGS LIKE FDDI/TokenRing/802.3 SNAPs... | |
448 | */ | |
449 | ||
450 | if (veth->h_vlan_proto != __constant_htons(ETH_P_8021Q)) { | |
451 | int orig_headroom = skb_headroom(skb); | |
452 | unsigned short veth_TCI; | |
453 | ||
454 | /* This is not a VLAN frame...but we can fix that! */ | |
455 | VLAN_DEV_INFO(dev)->cnt_encap_on_xmit++; | |
456 | ||
457 | #ifdef VLAN_DEBUG | |
458 | printk(VLAN_DBG "%s: proto to encap: 0x%hx (hbo)\n", | |
459 | __FUNCTION__, htons(veth->h_vlan_proto)); | |
460 | #endif | |
461 | /* Construct the second two bytes. This field looks something | |
462 | * like: | |
463 | * usr_priority: 3 bits (high bits) | |
464 | * CFI 1 bit | |
465 | * VLAN ID 12 bits (low bits) | |
466 | */ | |
467 | veth_TCI = VLAN_DEV_INFO(dev)->vlan_id; | |
468 | veth_TCI |= vlan_dev_get_egress_qos_mask(dev, skb); | |
469 | ||
470 | skb = __vlan_put_tag(skb, veth_TCI); | |
471 | if (!skb) { | |
472 | stats->tx_dropped++; | |
473 | return 0; | |
474 | } | |
475 | ||
476 | if (orig_headroom < VLAN_HLEN) { | |
477 | VLAN_DEV_INFO(dev)->cnt_inc_headroom_on_tx++; | |
478 | } | |
479 | } | |
480 | ||
481 | #ifdef VLAN_DEBUG | |
482 | printk(VLAN_DBG "%s: about to send skb: %p to dev: %s\n", | |
483 | __FUNCTION__, skb, skb->dev->name); | |
484 | printk(VLAN_DBG " %2hx.%2hx.%2hx.%2xh.%2hx.%2hx %2hx.%2hx.%2hx.%2hx.%2hx.%2hx %4hx %4hx %4hx\n", | |
485 | veth->h_dest[0], veth->h_dest[1], veth->h_dest[2], veth->h_dest[3], veth->h_dest[4], veth->h_dest[5], | |
486 | veth->h_source[0], veth->h_source[1], veth->h_source[2], veth->h_source[3], veth->h_source[4], veth->h_source[5], | |
487 | veth->h_vlan_proto, veth->h_vlan_TCI, veth->h_vlan_encapsulated_proto); | |
488 | #endif | |
489 | ||
490 | stats->tx_packets++; /* for statics only */ | |
491 | stats->tx_bytes += skb->len; | |
492 | ||
493 | skb->dev = VLAN_DEV_INFO(dev)->real_dev; | |
494 | dev_queue_xmit(skb); | |
495 | ||
496 | return 0; | |
497 | } | |
498 | ||
499 | int vlan_dev_hwaccel_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) | |
500 | { | |
501 | struct net_device_stats *stats = vlan_dev_get_stats(dev); | |
502 | unsigned short veth_TCI; | |
503 | ||
504 | /* Construct the second two bytes. This field looks something | |
505 | * like: | |
506 | * usr_priority: 3 bits (high bits) | |
507 | * CFI 1 bit | |
508 | * VLAN ID 12 bits (low bits) | |
509 | */ | |
510 | veth_TCI = VLAN_DEV_INFO(dev)->vlan_id; | |
511 | veth_TCI |= vlan_dev_get_egress_qos_mask(dev, skb); | |
512 | skb = __vlan_hwaccel_put_tag(skb, veth_TCI); | |
513 | ||
514 | stats->tx_packets++; | |
515 | stats->tx_bytes += skb->len; | |
516 | ||
517 | skb->dev = VLAN_DEV_INFO(dev)->real_dev; | |
518 | dev_queue_xmit(skb); | |
519 | ||
520 | return 0; | |
521 | } | |
522 | ||
523 | int vlan_dev_change_mtu(struct net_device *dev, int new_mtu) | |
524 | { | |
525 | /* TODO: gotta make sure the underlying layer can handle it, | |
526 | * maybe an IFF_VLAN_CAPABLE flag for devices? | |
527 | */ | |
528 | if (VLAN_DEV_INFO(dev)->real_dev->mtu < new_mtu) | |
529 | return -ERANGE; | |
530 | ||
531 | dev->mtu = new_mtu; | |
532 | ||
533 | return 0; | |
534 | } | |
535 | ||
536 | int vlan_dev_set_ingress_priority(char *dev_name, __u32 skb_prio, short vlan_prio) | |
537 | { | |
538 | struct net_device *dev = dev_get_by_name(dev_name); | |
539 | ||
540 | if (dev) { | |
541 | if (dev->priv_flags & IFF_802_1Q_VLAN) { | |
542 | /* see if a priority mapping exists.. */ | |
543 | VLAN_DEV_INFO(dev)->ingress_priority_map[vlan_prio & 0x7] = skb_prio; | |
544 | dev_put(dev); | |
545 | return 0; | |
546 | } | |
547 | ||
548 | dev_put(dev); | |
549 | } | |
550 | return -EINVAL; | |
551 | } | |
552 | ||
553 | int vlan_dev_set_egress_priority(char *dev_name, __u32 skb_prio, short vlan_prio) | |
554 | { | |
555 | struct net_device *dev = dev_get_by_name(dev_name); | |
556 | struct vlan_priority_tci_mapping *mp = NULL; | |
557 | struct vlan_priority_tci_mapping *np; | |
558 | ||
559 | if (dev) { | |
560 | if (dev->priv_flags & IFF_802_1Q_VLAN) { | |
561 | /* See if a priority mapping exists.. */ | |
562 | mp = VLAN_DEV_INFO(dev)->egress_priority_map[skb_prio & 0xF]; | |
563 | while (mp) { | |
564 | if (mp->priority == skb_prio) { | |
565 | mp->vlan_qos = ((vlan_prio << 13) & 0xE000); | |
566 | dev_put(dev); | |
567 | return 0; | |
568 | } | |
569 | mp = mp->next; | |
570 | } | |
571 | ||
572 | /* Create a new mapping then. */ | |
573 | mp = VLAN_DEV_INFO(dev)->egress_priority_map[skb_prio & 0xF]; | |
574 | np = kmalloc(sizeof(struct vlan_priority_tci_mapping), GFP_KERNEL); | |
575 | if (np) { | |
576 | np->next = mp; | |
577 | np->priority = skb_prio; | |
578 | np->vlan_qos = ((vlan_prio << 13) & 0xE000); | |
579 | VLAN_DEV_INFO(dev)->egress_priority_map[skb_prio & 0xF] = np; | |
580 | dev_put(dev); | |
581 | return 0; | |
582 | } else { | |
583 | dev_put(dev); | |
584 | return -ENOBUFS; | |
585 | } | |
586 | } | |
587 | dev_put(dev); | |
588 | } | |
589 | return -EINVAL; | |
590 | } | |
591 | ||
592 | /* Flags are defined in the vlan_dev_info class in include/linux/if_vlan.h file. */ | |
593 | int vlan_dev_set_vlan_flag(char *dev_name, __u32 flag, short flag_val) | |
594 | { | |
595 | struct net_device *dev = dev_get_by_name(dev_name); | |
596 | ||
597 | if (dev) { | |
598 | if (dev->priv_flags & IFF_802_1Q_VLAN) { | |
599 | /* verify flag is supported */ | |
600 | if (flag == 1) { | |
601 | if (flag_val) { | |
602 | VLAN_DEV_INFO(dev)->flags |= 1; | |
603 | } else { | |
604 | VLAN_DEV_INFO(dev)->flags &= ~1; | |
605 | } | |
606 | dev_put(dev); | |
607 | return 0; | |
608 | } else { | |
609 | printk(KERN_ERR "%s: flag %i is not valid.\n", | |
610 | __FUNCTION__, (int)(flag)); | |
611 | dev_put(dev); | |
612 | return -EINVAL; | |
613 | } | |
614 | } else { | |
615 | printk(KERN_ERR | |
616 | "%s: %s is not a vlan device, priv_flags: %hX.\n", | |
617 | __FUNCTION__, dev->name, dev->priv_flags); | |
618 | dev_put(dev); | |
619 | } | |
620 | } else { | |
621 | printk(KERN_ERR "%s: Could not find device: %s\n", | |
622 | __FUNCTION__, dev_name); | |
623 | } | |
624 | ||
625 | return -EINVAL; | |
626 | } | |
627 | ||
628 | ||
629 | int vlan_dev_get_realdev_name(const char *dev_name, char* result) | |
630 | { | |
631 | struct net_device *dev = dev_get_by_name(dev_name); | |
632 | int rv = 0; | |
633 | if (dev) { | |
634 | if (dev->priv_flags & IFF_802_1Q_VLAN) { | |
635 | strncpy(result, VLAN_DEV_INFO(dev)->real_dev->name, 23); | |
636 | rv = 0; | |
637 | } else { | |
638 | rv = -EINVAL; | |
639 | } | |
640 | dev_put(dev); | |
641 | } else { | |
642 | rv = -ENODEV; | |
643 | } | |
644 | return rv; | |
645 | } | |
646 | ||
647 | int vlan_dev_get_vid(const char *dev_name, unsigned short* result) | |
648 | { | |
649 | struct net_device *dev = dev_get_by_name(dev_name); | |
650 | int rv = 0; | |
651 | if (dev) { | |
652 | if (dev->priv_flags & IFF_802_1Q_VLAN) { | |
653 | *result = VLAN_DEV_INFO(dev)->vlan_id; | |
654 | rv = 0; | |
655 | } else { | |
656 | rv = -EINVAL; | |
657 | } | |
658 | dev_put(dev); | |
659 | } else { | |
660 | rv = -ENODEV; | |
661 | } | |
662 | return rv; | |
663 | } | |
664 | ||
665 | ||
666 | int vlan_dev_set_mac_address(struct net_device *dev, void *addr_struct_p) | |
667 | { | |
668 | struct sockaddr *addr = (struct sockaddr *)(addr_struct_p); | |
669 | int i; | |
670 | ||
671 | if (netif_running(dev)) | |
672 | return -EBUSY; | |
673 | ||
674 | memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); | |
675 | ||
676 | printk("%s: Setting MAC address to ", dev->name); | |
677 | for (i = 0; i < 6; i++) | |
678 | printk(" %2.2x", dev->dev_addr[i]); | |
679 | printk(".\n"); | |
680 | ||
681 | if (memcmp(VLAN_DEV_INFO(dev)->real_dev->dev_addr, | |
682 | dev->dev_addr, | |
683 | dev->addr_len) != 0) { | |
684 | if (!(VLAN_DEV_INFO(dev)->real_dev->flags & IFF_PROMISC)) { | |
685 | int flgs = VLAN_DEV_INFO(dev)->real_dev->flags; | |
686 | ||
687 | /* Increment our in-use promiscuity counter */ | |
688 | dev_set_promiscuity(VLAN_DEV_INFO(dev)->real_dev, 1); | |
689 | ||
690 | /* Make PROMISC visible to the user. */ | |
691 | flgs |= IFF_PROMISC; | |
692 | printk("VLAN (%s): Setting underlying device (%s) to promiscious mode.\n", | |
693 | dev->name, VLAN_DEV_INFO(dev)->real_dev->name); | |
694 | dev_change_flags(VLAN_DEV_INFO(dev)->real_dev, flgs); | |
695 | } | |
696 | } else { | |
697 | printk("VLAN (%s): Underlying device (%s) has same MAC, not checking promiscious mode.\n", | |
698 | dev->name, VLAN_DEV_INFO(dev)->real_dev->name); | |
699 | } | |
700 | ||
701 | return 0; | |
702 | } | |
703 | ||
704 | static inline int vlan_dmi_equals(struct dev_mc_list *dmi1, | |
705 | struct dev_mc_list *dmi2) | |
706 | { | |
707 | return ((dmi1->dmi_addrlen == dmi2->dmi_addrlen) && | |
708 | (memcmp(dmi1->dmi_addr, dmi2->dmi_addr, dmi1->dmi_addrlen) == 0)); | |
709 | } | |
710 | ||
711 | /** dmi is a single entry into a dev_mc_list, a single node. mc_list is | |
712 | * an entire list, and we'll iterate through it. | |
713 | */ | |
714 | static int vlan_should_add_mc(struct dev_mc_list *dmi, struct dev_mc_list *mc_list) | |
715 | { | |
716 | struct dev_mc_list *idmi; | |
717 | ||
718 | for (idmi = mc_list; idmi != NULL; ) { | |
719 | if (vlan_dmi_equals(dmi, idmi)) { | |
720 | if (dmi->dmi_users > idmi->dmi_users) | |
721 | return 1; | |
722 | else | |
723 | return 0; | |
724 | } else { | |
725 | idmi = idmi->next; | |
726 | } | |
727 | } | |
728 | ||
729 | return 1; | |
730 | } | |
731 | ||
732 | static inline void vlan_destroy_mc_list(struct dev_mc_list *mc_list) | |
733 | { | |
734 | struct dev_mc_list *dmi = mc_list; | |
735 | struct dev_mc_list *next; | |
736 | ||
737 | while(dmi) { | |
738 | next = dmi->next; | |
739 | kfree(dmi); | |
740 | dmi = next; | |
741 | } | |
742 | } | |
743 | ||
744 | static void vlan_copy_mc_list(struct dev_mc_list *mc_list, struct vlan_dev_info *vlan_info) | |
745 | { | |
746 | struct dev_mc_list *dmi, *new_dmi; | |
747 | ||
748 | vlan_destroy_mc_list(vlan_info->old_mc_list); | |
749 | vlan_info->old_mc_list = NULL; | |
750 | ||
751 | for (dmi = mc_list; dmi != NULL; dmi = dmi->next) { | |
752 | new_dmi = kmalloc(sizeof(*new_dmi), GFP_ATOMIC); | |
753 | if (new_dmi == NULL) { | |
754 | printk(KERN_ERR "vlan: cannot allocate memory. " | |
755 | "Multicast may not work properly from now.\n"); | |
756 | return; | |
757 | } | |
758 | ||
759 | /* Copy whole structure, then make new 'next' pointer */ | |
760 | *new_dmi = *dmi; | |
761 | new_dmi->next = vlan_info->old_mc_list; | |
762 | vlan_info->old_mc_list = new_dmi; | |
763 | } | |
764 | } | |
765 | ||
766 | static void vlan_flush_mc_list(struct net_device *dev) | |
767 | { | |
768 | struct dev_mc_list *dmi = dev->mc_list; | |
769 | ||
770 | while (dmi) { | |
771 | printk(KERN_DEBUG "%s: del %.2x:%.2x:%.2x:%.2x:%.2x:%.2x mcast address from vlan interface\n", | |
772 | dev->name, | |
773 | dmi->dmi_addr[0], | |
774 | dmi->dmi_addr[1], | |
775 | dmi->dmi_addr[2], | |
776 | dmi->dmi_addr[3], | |
777 | dmi->dmi_addr[4], | |
778 | dmi->dmi_addr[5]); | |
779 | dev_mc_delete(dev, dmi->dmi_addr, dmi->dmi_addrlen, 0); | |
780 | dmi = dev->mc_list; | |
781 | } | |
782 | ||
783 | /* dev->mc_list is NULL by the time we get here. */ | |
784 | vlan_destroy_mc_list(VLAN_DEV_INFO(dev)->old_mc_list); | |
785 | VLAN_DEV_INFO(dev)->old_mc_list = NULL; | |
786 | } | |
787 | ||
788 | int vlan_dev_open(struct net_device *dev) | |
789 | { | |
790 | if (!(VLAN_DEV_INFO(dev)->real_dev->flags & IFF_UP)) | |
791 | return -ENETDOWN; | |
792 | ||
793 | return 0; | |
794 | } | |
795 | ||
796 | int vlan_dev_stop(struct net_device *dev) | |
797 | { | |
798 | vlan_flush_mc_list(dev); | |
799 | return 0; | |
800 | } | |
801 | ||
802 | int vlan_dev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) | |
803 | { | |
804 | struct net_device *real_dev = VLAN_DEV_INFO(dev)->real_dev; | |
805 | struct ifreq ifrr; | |
806 | int err = -EOPNOTSUPP; | |
807 | ||
808 | strncpy(ifrr.ifr_name, real_dev->name, IFNAMSIZ); | |
809 | ifrr.ifr_ifru = ifr->ifr_ifru; | |
810 | ||
811 | switch(cmd) { | |
812 | case SIOCGMIIPHY: | |
813 | case SIOCGMIIREG: | |
814 | case SIOCSMIIREG: | |
815 | if (real_dev->do_ioctl && netif_device_present(real_dev)) | |
816 | err = real_dev->do_ioctl(real_dev, &ifrr, cmd); | |
817 | break; | |
818 | ||
819 | case SIOCETHTOOL: | |
820 | err = dev_ethtool(&ifrr); | |
821 | } | |
822 | ||
823 | if (!err) | |
824 | ifr->ifr_ifru = ifrr.ifr_ifru; | |
825 | ||
826 | return err; | |
827 | } | |
828 | ||
829 | /** Taken from Gleb + Lennert's VLAN code, and modified... */ | |
830 | void vlan_dev_set_multicast_list(struct net_device *vlan_dev) | |
831 | { | |
832 | struct dev_mc_list *dmi; | |
833 | struct net_device *real_dev; | |
834 | int inc; | |
835 | ||
836 | if (vlan_dev && (vlan_dev->priv_flags & IFF_802_1Q_VLAN)) { | |
837 | /* Then it's a real vlan device, as far as we can tell.. */ | |
838 | real_dev = VLAN_DEV_INFO(vlan_dev)->real_dev; | |
839 | ||
840 | /* compare the current promiscuity to the last promisc we had.. */ | |
841 | inc = vlan_dev->promiscuity - VLAN_DEV_INFO(vlan_dev)->old_promiscuity; | |
842 | if (inc) { | |
843 | printk(KERN_INFO "%s: dev_set_promiscuity(master, %d)\n", | |
844 | vlan_dev->name, inc); | |
845 | dev_set_promiscuity(real_dev, inc); /* found in dev.c */ | |
846 | VLAN_DEV_INFO(vlan_dev)->old_promiscuity = vlan_dev->promiscuity; | |
847 | } | |
848 | ||
849 | inc = vlan_dev->allmulti - VLAN_DEV_INFO(vlan_dev)->old_allmulti; | |
850 | if (inc) { | |
851 | printk(KERN_INFO "%s: dev_set_allmulti(master, %d)\n", | |
852 | vlan_dev->name, inc); | |
853 | dev_set_allmulti(real_dev, inc); /* dev.c */ | |
854 | VLAN_DEV_INFO(vlan_dev)->old_allmulti = vlan_dev->allmulti; | |
855 | } | |
856 | ||
857 | /* looking for addresses to add to master's list */ | |
858 | for (dmi = vlan_dev->mc_list; dmi != NULL; dmi = dmi->next) { | |
859 | if (vlan_should_add_mc(dmi, VLAN_DEV_INFO(vlan_dev)->old_mc_list)) { | |
860 | dev_mc_add(real_dev, dmi->dmi_addr, dmi->dmi_addrlen, 0); | |
861 | printk(KERN_DEBUG "%s: add %.2x:%.2x:%.2x:%.2x:%.2x:%.2x mcast address to master interface\n", | |
862 | vlan_dev->name, | |
863 | dmi->dmi_addr[0], | |
864 | dmi->dmi_addr[1], | |
865 | dmi->dmi_addr[2], | |
866 | dmi->dmi_addr[3], | |
867 | dmi->dmi_addr[4], | |
868 | dmi->dmi_addr[5]); | |
869 | } | |
870 | } | |
871 | ||
872 | /* looking for addresses to delete from master's list */ | |
873 | for (dmi = VLAN_DEV_INFO(vlan_dev)->old_mc_list; dmi != NULL; dmi = dmi->next) { | |
874 | if (vlan_should_add_mc(dmi, vlan_dev->mc_list)) { | |
875 | /* if we think we should add it to the new list, then we should really | |
876 | * delete it from the real list on the underlying device. | |
877 | */ | |
878 | dev_mc_delete(real_dev, dmi->dmi_addr, dmi->dmi_addrlen, 0); | |
879 | printk(KERN_DEBUG "%s: del %.2x:%.2x:%.2x:%.2x:%.2x:%.2x mcast address from master interface\n", | |
880 | vlan_dev->name, | |
881 | dmi->dmi_addr[0], | |
882 | dmi->dmi_addr[1], | |
883 | dmi->dmi_addr[2], | |
884 | dmi->dmi_addr[3], | |
885 | dmi->dmi_addr[4], | |
886 | dmi->dmi_addr[5]); | |
887 | } | |
888 | } | |
889 | ||
890 | /* save multicast list */ | |
891 | vlan_copy_mc_list(vlan_dev->mc_list, VLAN_DEV_INFO(vlan_dev)); | |
892 | } | |
893 | } |