]> git.proxmox.com Git - mirror_frr.git/blame - redhat/frr.spec.in
redhat: Require librtr >= 0.8.0
[mirror_frr.git] / redhat / frr.spec.in
CommitLineData
edd7c245 1# configure options
b64d92a8 2#
f79f7a7b 3# Some can be overridden on rpmbuild commandline with:
b64d92a8 4# rpmbuild --define 'variable value'
f755bf6d 5# (use any value, ie 1 for flag "with_XXXX" definitions)
b64d92a8 6#
30da4585
PJ
7# E.g. rpmbuild --define 'release_rev 02' may be useful if building
8# rpms again and again on the same day, so the newer rpms can be installed.
9# bumping the number each time.
b64d92a8 10
b387c334 11#################### FRRouting (FRR) configure options #####################
1189075b 12# with-feature options
e763afa5 13%{!?with_babeld: %global with_babeld 1 }
7134904b 14%{!?with_bfdd: %global with_bfdd 1 }
5a76db68 15%{!?with_bgp_vnc: %global with_bgp_vnc 0 }
0e3daa4d 16%{!?with_cumulus: %global with_cumulus 0 }
ff00e18d
RK
17%{!?with_eigrpd: %global with_eigrpd 1 }
18%{!?with_fpm: %global with_fpm 1 }
19%{!?with_ldpd: %global with_ldpd 1 }
20%{!?with_multipath: %global with_multipath 256 }
21%{!?with_nhrpd: %global with_nhrpd 1 }
22%{!?with_ospfapi: %global with_ospfapi 1 }
23%{!?with_ospfclient: %global with_ospfclient 1 }
24%{!?with_pam: %global with_pam 0 }
25%{!?with_pbrd: %global with_pbrd 1 }
5a76db68 26%{!?with_pimd: %global with_pimd 1 }
97b5f22b 27%{!?with_vrrpd: %global with_vrrpd 1 }
ff00e18d
RK
28%{!?with_rtadv: %global with_rtadv 1 }
29%{!?with_watchfrr: %global with_watchfrr 1 }
4d7b695d 30%{!?with_pathd: %global with_pathd 1 }
ff00e18d
RK
31
32# user and group
33%{!?frr_user: %global frr_user frr }
34%{!?vty_group: %global vty_group frrvty }
30b9d89b 35
36# path defines
ff00e18d
RK
37%define configdir %{_sysconfdir}/%{name}
38%define _sbindir /usr/lib/frr
39%define zeb_src %{_builddir}/%{name}-%{frrversion}
40%define zeb_rh_src %{zeb_src}/redhat
41%define zeb_docs %{zeb_src}/doc
42%define frr_tools %{zeb_src}/tools
788cdc6d 43
e0626854 44# defines for configure
0bb68611 45%define rundir %{_localstatedir}/run/%{name}
ccd40dee 46
1189075b 47############################################################################
48
f755bf6d
MW
49#### Version String tweak
50# Remove invalid characters form version string and replace with _
d4fbc1de 51%{expand: %%global rpmversion %(echo '@VERSION@' | tr [:blank:]- _ )}
c115e4a4 52%define frrversion @VERSION@
1189075b 53
f755bf6d
MW
54#### Check for systemd or init.d (upstart)
55# Check for init.d (upstart) as used in CentOS 6 or systemd (ie CentOS 7)
a999f98c 56%if 0%{?fedora} || 0%{?rhel} >= 7 || 0%{?suse_version} >= 1210
a1cfe675
TR
57 %global initsystem systemd
58%else
a999f98c 59%if 0%{?rhel} && 0%{?rhel} < 7
a1cfe675
TR
60 %global initsystem upstart
61%else
62 %{expand: %%global initsystem %(if [[ `/sbin/init --version 2> /dev/null` =~ upstart ]]; then echo upstart; elif [[ `readlink -f /sbin/init` = /usr/lib/systemd/systemd ]]; then echo systemd; elif [[ `systemctl` =~ -\.mount ]]; then echo systemd; fi)}
63%endif
64%endif
54c059f1 65
83d4df8e
MW
66# Check for python version - use python2.7 on CentOS 6, otherwise python3
67%if 0%{?rhel} && 0%{?rhel} < 7
68 %global use_python2 1
69%else
70 %global use_python2 0
71%endif
72
54c059f1 73# If init system is systemd, then always enable watchfrr
f755bf6d 74%if "%{initsystem}" == "systemd"
9a581ae4 75 %global with_watchfrr 1
f755bf6d 76%endif
7c08d77f 77
150e7c7e 78#### Check for RedHat 6.x or CentOS 6.x - they are too old to support PIM.
41b86ba4 79#### Always disable it on these old systems unconditionally
41b86ba4 80#
9e631cc4
MW
81# if CentOS / RedHat and version < 7, then disable PIMd (too old, won't work)
82%if 0%{?rhel} && 0%{?rhel} < 7
41b86ba4
MW
83 %global with_pimd 0
84%endif
85
15d74e93 86# misc internal defines
9a581ae4
MW
87%{!?frr_uid: %global frr_uid 92 }
88%{!?frr_gid: %global frr_gid 92 }
89%{!?vty_gid: %global vty_gid 85 }
f755bf6d 90
4d7b695d 91%define daemon_list zebra ripd ospfd bgpd isisd ripngd ospf6d pbrd staticd bfdd fabricd pathd
0df63b52 92
b021388f 93%if %{with_ldpd}
5f371d0b 94 %define daemon_ldpd ldpd
b021388f 95%else
5f371d0b 96 %define daemon_ldpd ""
b021388f
RW
97%endif
98
41b86ba4 99%if %{with_pimd}
5f371d0b 100 %define daemon_pimd pimd
41b86ba4 101%else
5f371d0b 102 %define daemon_pimd ""
b021388f
RW
103%endif
104
1abe1280 105%if %{with_pbrd}
5f371d0b 106 %define daemon_pbrd pbrd
1abe1280 107%else
5f371d0b 108 %define daemon_pbrd ""
1abe1280
DS
109%endif
110
729f041c 111%if %{with_nhrpd}
5f371d0b 112 %define daemon_nhrpd nhrpd
729f041c 113%else
5f371d0b 114 %define daemon_nhrpd ""
729f041c
TT
115%endif
116
5a76db68 117%if %{with_eigrpd}
5f371d0b 118 %define daemon_eigrpd eigrpd
5a76db68 119%else
5f371d0b 120 %define daemon_eigrpd ""
5a76db68
MW
121%endif
122
e763afa5 123%if %{with_babeld}
5f371d0b 124 %define daemon_babeld babeld
e763afa5 125%else
5f371d0b 126 %define daemon_babeld ""
e763afa5
DL
127%endif
128
97b5f22b
QY
129%if %{with_vrrpd}
130 %define daemon_vrrpd vrrpd
131%else
132 %define daemon_vrrpd ""
133%endif
134
9473e340 135%if %{with_watchfrr}
5f371d0b 136 %define daemon_watchfrr watchfrr
f755bf6d 137%else
5f371d0b 138 %define daemon_watchfrr ""
f755bf6d
MW
139%endif
140
7134904b
RZ
141%if %{with_bfdd}
142 %define daemon_bfdd bfdd
143%else
144 %define daemon_bfdd ""
145%endif
146
4d7b695d
SM
147%if %{with_pathd}
148 %define daemon_pathd pathd
149%else
150 %define daemon_pathd ""
151%endif
152
153%define all_daemons %{daemon_list} %{daemon_ldpd} %{daemon_pimd} %{daemon_nhrpd} %{daemon_eigrpd} %{daemon_babeld} %{daemon_watchfrr} %{daemon_pbrd} %{daemon_bfdd} %{daemon_vrrpd} %{daemon_pathd}
b3324e27 154
4859e20c 155#release sub-revision (the two digits after the CONFDATE)
9a581ae4 156%{!?release_rev: %global release_rev 01 }
4859e20c 157
788cdc6d 158Summary: Routing daemon
9a581ae4
MW
159Name: frr
160Version: %{rpmversion}
7ba01507 161Release: %{release_rev}%{?dist}
9a581ae4
MW
162License: GPLv2+
163Group: System Environment/Daemons
c410a861 164Source0: https://github.com/FRRouting/frr/archive/%{name}-%{frrversion}.tar.gz
e1ff8246 165URL: https://www.frrouting.org
1a629db7 166Requires(pre): shadow-utils
501c1362
RK
167Requires(preun): info
168Requires(post): info
5ebf9672
RK
169BuildRequires: bison >= 2.7
170BuildRequires: c-ares-devel
171BuildRequires: flex
172BuildRequires: gcc
173BuildRequires: json-c-devel
174BuildRequires: libcap-devel
175BuildRequires: make
176BuildRequires: ncurses-devel
177BuildRequires: readline-devel
178BuildRequires: texinfo
3bb513c3 179BuildRequires: libyang2-devel
01aff72e
MW
180%if 0%{?rhel} && 0%{?rhel} < 7
181#python27-devel is available from ius community repo for RedHat/CentOS 6
5ebf9672
RK
182BuildRequires: python27-devel
183BuildRequires: python27-sphinx
01aff72e 184%else
83d4df8e 185%if %{use_python2}
5ebf9672
RK
186BuildRequires: python-devel >= 2.7
187BuildRequires: python-sphinx
83d4df8e
MW
188%else
189BuildRequires: python3-devel
190BuildRequires: python3-sphinx
01aff72e 191%endif
3f5c15f6 192%endif
83d4df8e
MW
193%if 0%{?rhel} > 7
194#platform-python-devel is needed for /usr/bin/pathfix.py
195BuildRequires: platform-python-devel
196%endif
b4e993b2 197Requires: initscripts
f755bf6d 198%if %{with_pam}
9a581ae4 199BuildRequires: pam-devel
f755bf6d
MW
200%endif
201%if "%{initsystem}" == "systemd"
c5b26b20
JAG
202BuildRequires: systemd
203BuildRequires: systemd-devel
9a581ae4
MW
204Requires(post): systemd
205Requires(preun): systemd
206Requires(postun): systemd
f755bf6d 207%else
95624f7b
RK
208Requires(post): chkconfig
209Requires(preun): chkconfig
788cdc6d 210# Initscripts > 5.60 is required for IPv6 support
9a581ae4 211Requires(pre): initscripts >= 5.60
f755bf6d 212%endif
9a581ae4 213Provides: routingdaemon = %{version}-%{release}
5d82c57b
BR
214Obsoletes: gated mrt zebra frr-sysvinit
215Conflicts: bird
788cdc6d 216
95c16f4c 217
788cdc6d 218%description
447a8fe9 219FRRouting is a free software that manages TCP/IP based routing
788cdc6d 220protocol. It takes multi-server and multi-thread approach to resolve
221the current complexity of the Internet.
222
3e7c8d04 223FRRouting supports BGP4, OSPFv2, OSPFv3, ISIS, RIP, RIPng, PIM, LDP
7134904b 224NHRP, Babel, PBR, EIGRP and BFD.
788cdc6d 225
447a8fe9 226FRRouting is a fork of Quagga.
788cdc6d 227
95c16f4c 228
448ed4a2 229%package contrib
c115e4a4 230Summary: contrib tools for frr
448ed4a2 231Group: System Environment/Daemons
232
233%description contrib
c115e4a4 234Contributed/3rd party tools which may be of use with frr.
448ed4a2 235
95c16f4c 236
386fcd12
MW
237%package pythontools
238Summary: python tools for frr
83d4df8e
MW
239%if 0%{?rhel} && 0%{?rhel} < 7
240#python27 is available from ius community repo for RedHat/CentOS 6
241BuildRequires: python27
242Requires: python27-ipaddress
243%else
244%if %{use_python2}
245BuildRequires: python2
246Requires: python2-ipaddress
3f5c15f6 247%else
83d4df8e
MW
248BuildRequires: python3
249%endif
3f5c15f6 250%endif
386fcd12
MW
251Group: System Environment/Daemons
252
253%description pythontools
254Contributed python 2.7 tools which may be of use with frr.
255
95c16f4c 256
e0626854 257%package devel
c115e4a4 258Summary: Header and object files for frr development
e0626854 259Group: System Environment/Daemons
f755bf6d 260Requires: %{name} = %{version}-%{release}
e0626854 261
262%description devel
485ac9a7 263The frr-devel package contains the header and object files necessary for
c115e4a4 264developing OSPF-API and frr applications.
e0626854 265
95c16f4c 266
a0187fdc
MW
267%package rpki-rtrlib
268Summary: BGP RPKI support (rtrlib)
269Group: System Environment/Daemons
0ad71348 270BuildRequires: librtr-devel >= 0.8
a0187fdc
MW
271Requires: %{name} = %{version}-%{release}
272
273%description rpki-rtrlib
274Adds RPKI support to FRR's bgpd, allowing validation of BGP routes
275against cryptographic information stored in WHOIS databases. This is
276used to prevent hijacking of networks on the wider internet. It is only
277relevant to internet service providers using their own autonomous system
278number.
279
280
d0df840a
MW
281%package snmp
282Summary: SNMP support
283Group: System Environment/Daemons
284BuildRequires: net-snmp-devel
285Requires: %{name} = %{version}-%{release}
286
287%description snmp
288Adds SNMP support to FRR's daemons by attaching to net-snmp's snmpd
289through the AgentX protocol. Provides read-only access to current
290routing state through standard SNMP MIBs.
291
292
788cdc6d 293%prep
5f371d0b 294%setup -q -n frr-%{frrversion}
788cdc6d 295
95c16f4c 296
788cdc6d 297%build
7966b97c 298
299# For standard gcc verbosity, uncomment these lines:
300#CFLAGS="%{optflags} -Wall -Wsign-compare -Wpointer-arith"
301#CFLAGS="${CFLAGS} -Wbad-function-cast -Wwrite-strings"
302
303# For ultra gcc verbosity, uncomment these lines also:
304#CFLAGS="${CFLAGS} -W -Wcast-qual -Wstrict-prototypes"
305#CFLAGS="${CFLAGS} -Wmissing-declarations -Wmissing-noreturn"
306#CFLAGS="${CFLAGS} -Wmissing-format-attribute -Wunreachable-code"
307#CFLAGS="${CFLAGS} -Wpacked -Wpadded"
308
788cdc6d 309%configure \
c63f5f2c 310 --sbindir=%{_sbindir} \
931e1d68 311 --sysconfdir=%{configdir} \
0bb68611 312 --localstatedir=%{rundir} \
5c3ad1d4 313 --disable-static \
9a581ae4 314 --disable-werror \
0ed9196b 315 --enable-irdp \
54b25dca 316%if %{with_multipath}
9a581ae4 317 --enable-multipath=%{with_multipath} \
788cdc6d 318%endif
9a581ae4 319 --enable-vtysh \
54b25dca 320%if %{with_ospfclient}
19ced9a4 321 --enable-ospfclient \
68980084 322%else
19ced9a4 323 --disable-ospfclient\
68980084 324%endif
54b25dca 325%if %{with_ospfapi}
c9cad876 326 --enable-ospfapi \
68980084 327%else
0cff191d 328 --disable-ospfapi \
68980084 329%endif
e7cd37bf 330%if %{with_rtadv}
c9cad876 331 --enable-rtadv \
e7cd37bf 332%else
0cff191d 333 --disable-rtadv \
e7cd37bf 334%endif
b021388f 335%if %{with_ldpd}
9a581ae4 336 --enable-ldpd \
b021388f 337%else
9a581ae4 338 --disable-ldpd \
b021388f 339%endif
41b86ba4
MW
340%if %{with_pimd}
341 --enable-pimd \
b021388f 342%else
41b86ba4 343 --disable-pimd \
b021388f 344%endif
1abe1280
DS
345%if %{with_pbrd}
346 --enable-pbrd \
347%else
348 --disable-pbrd \
349%endif
729f041c 350%if %{with_nhrpd}
fe99b015 351 --enable-nhrpd \
729f041c 352%else
fe99b015 353 --disable-nhrpd \
729f041c 354%endif
5a76db68 355%if %{with_eigrpd}
fe99b015 356 --enable-eigrpd \
5a76db68 357%else
fe99b015 358 --disable-eigrpd \
5a76db68 359%endif
e763afa5 360%if %{with_babeld}
fe99b015 361 --enable-babeld \
e763afa5 362%else
fe99b015 363 --disable-babeld \
e763afa5 364%endif
97b5f22b
QY
365%if %{with_vrrpd}
366 --enable-vrrpd \
367%else
368 --disable-vrrpd \
369%endif
54b25dca 370%if %{with_pam}
9a581ae4 371 --with-libpam \
788cdc6d 372%endif
c115e4a4 373%if 0%{?frr_user:1}
1dc5a0dc
RK
374 --enable-user=%{frr_user} \
375 --enable-group=%{frr_user} \
edd7c245 376%endif
f755bf6d 377%if 0%{?vty_group:1}
1dc5a0dc 378 --enable-vty-group=%{vty_group} \
edd7c245 379%endif
f755bf6d 380%if %{with_fpm}
9a581ae4 381 --enable-fpm \
f755bf6d 382%else
9a581ae4 383 --disable-fpm \
f755bf6d 384%endif
9473e340 385%if %{with_watchfrr}
9a581ae4 386 --enable-watchfrr \
f755bf6d 387%else
9a581ae4 388 --disable-watchfrr \
65efcfce 389%endif
0e3daa4d
RK
390%if %{with_cumulus}
391 --enable-cumulus \
392%endif
65efcfce 393%if %{with_bgp_vnc}
9a581ae4 394 --enable-bgp-vnc \
65efcfce 395%else
9a581ae4 396 --disable-bgp-vnc \
f755bf6d 397%endif
c9cad876 398 --enable-isisd \
c5b26b20
JAG
399%if "%{initsystem}" == "systemd"
400 --enable-systemd \
401%endif
7134904b 402 --enable-rpki \
7134904b 403%if %{with_bfdd}
a214288c 404 --enable-bfdd \
9f892cc5 405%else
a214288c 406 --disable-bfdd \
4d7b695d
SM
407%endif
408%if %{with_pathd}
409 --enable-pathd \
410%else
411 --disable-pathd \
aaf38c94 412%endif
d0df840a 413 --enable-snmp
45da32d7 414 # end
788cdc6d 415
a214288c 416make %{?_smp_mflags} MAKEINFO="makeinfo --no-split"
788cdc6d 417
83d4df8e
MW
418%if %{use_python2}
419# Change frr-reload.py to use python2.7
420sed -e '1c #!/usr/bin/python2.7' -i %{zeb_src}/tools/frr-reload.py
421sed -e '1c #!/usr/bin/python2.7' -i %{zeb_src}/tools/generate_support_bundle.py
422%else
423# Change frr-reload.py to use python3
424sed -e '1c #!/usr/bin/python3' -i %{zeb_src}/tools/frr-reload.py
425sed -e '1c #!/usr/bin/python3' -i %{zeb_src}/tools/generate_support_bundle.py
426%endif
427
788cdc6d 428pushd doc
a214288c 429make info
788cdc6d 430popd
431
95c16f4c 432
788cdc6d 433%install
9b979646 434mkdir -p %{buildroot}%{_sysconfdir}/{frr,sysconfig,logrotate.d,pam.d,default} \
9bf7cb0b
DA
435 %{buildroot}%{_infodir}
436mkdir -m 0755 -p %{buildroot}%{_localstatedir}/log/frr
a214288c 437make DESTDIR=%{buildroot} INSTALL="install -p" CP="cp -p" install
788cdc6d 438
9a344b74 439# Remove this file, as it is uninstalled and causes errors when building on RH9
f755bf6d 440rm -rf %{buildroot}/usr/share/info/dir
9a344b74 441
2cdd3d94
MW
442# Remove debian init script if it was installed
443rm -f %{buildroot}%{_sbindir}/frr
c63f5f2c 444
5c3ad1d4
RK
445# kill bogus libtool files
446rm -vf %{buildroot}%{_libdir}/frr/modules/*.la
447rm -vf %{buildroot}%{_libdir}/*.la
7cad61cb 448rm -vf %{buildroot}%{_libdir}/frr/libyang_plugins/*.la
0ed9196b 449
f755bf6d
MW
450# install /etc sources
451%if "%{initsystem}" == "systemd"
452mkdir -p %{buildroot}%{_unitdir}
81b834a5 453install -m644 %{zeb_src}/tools/frr.service %{buildroot}%{_unitdir}/frr.service
f755bf6d 454%else
9b979646 455mkdir -p %{buildroot}%{_initddir}
81b834a5 456ln -s %{_sbindir}/frrinit.sh %{buildroot}%{_initddir}/frr
f755bf6d
MW
457%endif
458
81b834a5 459install %{zeb_src}/tools/etc/frr/daemons %{buildroot}%{_sysconfdir}/frr
328b7121 460install %{zeb_src}/tools/etc/frr/frr.conf %{buildroot}%{_sysconfdir}/frr/frr.conf.template
5f371d0b
RK
461install -m644 %{zeb_rh_src}/frr.pam %{buildroot}%{_sysconfdir}/pam.d/frr
462install -m644 %{zeb_rh_src}/frr.logrotate %{buildroot}%{_sysconfdir}/logrotate.d/frr
463install -d -m750 %{buildroot}%{rundir}
edd7c245 464
83d4df8e 465%if 0%{?rhel} > 7 || 0%{?fedora} > 29
3f5c15f6 466# avoid `ERROR: ambiguous python shebang in` errors
83d4df8e
MW
467pathfix.py -pni "%{__python3} %{py3_shbang_opts}" %{buildroot}/usr/lib/frr/*.py
468%py_byte_compile %{__python3} %{buildroot}/usr/lib/frr/*.py
3f5c15f6 469%endif
95c16f4c 470
edd7c245 471%pre
472# add vty_group
f755bf6d 473%if 0%{?vty_group:1}
1a629db7 474 getent group %{vty_group} >/dev/null || groupadd -r -g %{vty_gid} %{vty_group}
edd7c245 475%endif
e7cd37bf 476
c115e4a4
MW
477# add frr user and group
478%if 0%{?frr_user:1}
1a629db7
RK
479 # Ensure that frr_gid gets correctly allocated
480 getent group %{frr_user} >/dev/null || groupadd -g %{frr_gid} %{frr_user}
481 getent passwd %{frr_user} >/dev/null || \
482 useradd -r -u %{frr_uid} -g %{frr_user} \
483 -s /sbin/nologin -c "FRRouting suite" \
484 -d %{rundir} %{frr_user}
485
486 %if 0%{?vty_group:1}
487 usermod -a -G %{vty_group} %{frr_user}
488 %endif
489%endif
490exit 0
f676b06e 491
788cdc6d 492
788cdc6d 493%post
30b9d89b 494# zebra_spec_add_service <service name> <port/proto> <comment>
788cdc6d 495# e.g. zebra_spec_add_service zebrasrv 2600/tcp "zebra service"
496
497zebra_spec_add_service ()
498{
150e7c7e 499 # Add port /etc/services entry if it isn't already there
9b979646 500 if [ -f %{_sysconfdir}/services ] && \
40bd7a62 501 ! %__sed -e 's/#.*$//' %{_sysconfdir}/services 2>/dev/null | %__grep -wq $1 ; then
9b979646 502 echo "$1 $2 # $3" >> %{_sysconfdir}/services
9a581ae4 503 fi
788cdc6d 504}
505
506zebra_spec_add_service zebrasrv 2600/tcp "zebra service"
507zebra_spec_add_service zebra 2601/tcp "zebra vty"
7ac1de8e 508zebra_spec_add_service staticd 2616/tcp "staticd vty"
788cdc6d 509zebra_spec_add_service ripd 2602/tcp "RIPd vty"
510zebra_spec_add_service ripngd 2603/tcp "RIPngd vty"
511zebra_spec_add_service ospfd 2604/tcp "OSPFd vty"
512zebra_spec_add_service bgpd 2605/tcp "BGPd vty"
513zebra_spec_add_service ospf6d 2606/tcp "OSPF6d vty"
5f371d0b 514zebra_spec_add_service isisd 2608/tcp "ISISd vty"
54b25dca 515%if %{with_ospfapi}
5f371d0b 516 zebra_spec_add_service ospfapi 2607/tcp "OSPF-API"
7021c425 517%endif
e763afa5 518%if %{with_babeld}
5f371d0b 519 zebra_spec_add_service babeld 2609/tcp "BABELd vty"
5a76db68 520%endif
729f041c 521%if %{with_nhrpd}
5f371d0b 522 zebra_spec_add_service nhrpd 2610/tcp "NHRPd vty"
729f041c 523%endif
41b86ba4 524%if %{with_pimd}
5f371d0b 525 zebra_spec_add_service pimd 2611/tcp "PIMd vty"
41b86ba4 526%endif
1abe1280 527%if %{with_pbrd}
5f371d0b 528 zebra_spec_add_service pbrd 2615/tcp "PBRd vty"
1abe1280 529%endif
b021388f 530%if %{with_ldpd}
5f371d0b 531 zebra_spec_add_service ldpd 2612/tcp "LDPd vty"
b021388f 532%endif
e763afa5 533%if %{with_eigrpd}
5f371d0b 534 zebra_spec_add_service eigrpd 2613/tcp "EIGRPd vty"
e763afa5 535%endif
7134904b
RZ
536%if %{with_bfdd}
537 zebra_spec_add_service bfdd 2617/tcp "BFDd vty"
538%endif
13d9aad8 539zebra_spec_add_service fabricd 2618/tcp "Fabricd vty"
97b5f22b
QY
540%if %{with_vrrpd}
541 zebra_spec_add_service vrrpd 2619/tcp "VRRPd vty"
542%endif
4d7b695d
SM
543%if %{with_pathd}
544 zebra_spec_add_service pathd 2620/tcp "Pathd vty"
545%endif
788cdc6d 546
f755bf6d 547%if "%{initsystem}" == "systemd"
5f371d0b
RK
548 for daemon in %all_daemons ; do
549 %systemd_post frr.service
550 done
f755bf6d 551%else
5f371d0b 552 /sbin/chkconfig --add frr
f755bf6d 553%endif
788cdc6d 554
75429e11
MW
555# Fix bad path in previous config files
556# Config files won't get replaced by default, so we do this ugly hack to fix it
81b834a5 557%__sed -i 's|watchfrr_options=|#watchfrr_options=|g' %{configdir}/daemons 2> /dev/null || true
75429e11 558
5b7077e8
DS
559# With systemd, watchfrr is mandatory. Fix config to make sure it's enabled if
560# we install or upgrade to a frr built with systemd
561%if "%{initsystem}" == "systemd"
931e1d68 562 %__sed -i 's|watchfrr_enable=no|watchfrr_enable=yes|g' %{configdir}/daemons 2> /dev/null || true
5b7077e8
DS
563%endif
564
c115e4a4 565/sbin/install-info %{_infodir}/frr.info.gz %{_infodir}/dir
788cdc6d 566
328b7121 567# Create dummy config file if they don't exist so basic functions can be used.
bc6ea7ae
KVH
568if [ ! -e %{configdir}/frr.conf ] && [ ! -e %{configdir}/zebra.conf ]; then
569 # No frr.conf and per daemon configs exist
328b7121 570 mv %{configdir}/frr.conf.template %{configdir}/frr.conf
c115e4a4 571%if 0%{?frr_user:1}
328b7121 572 chown %{frr_user}:%{frr_user} %{configdir}/frr.conf
e7cd37bf 573%endif
328b7121 574 chmod 640 %{configdir}/frr.conf
788cdc6d 575fi
2cdd3d94 576%if 0%{?frr_user:1}
1dc5a0dc 577 chown %{frr_user}:%{frr_user} %{configdir}/daemons
2cdd3d94
MW
578%endif
579
9473e340 580%if %{with_watchfrr}
9a581ae4 581 # No config for watchfrr - this is part of /etc/sysconfig/frr
931e1d68 582 rm -f %{configdir}/watchfrr.*
f755bf6d
MW
583%endif
584
931e1d68
RK
585if [ ! -e %{configdir}/vtysh.conf ]; then
586 touch %{configdir}/vtysh.conf
587 chmod 640 %{configdir}/vtysh.conf
2cdd3d94 588%if 0%{?frr_user:1}
5f371d0b
RK
589 %if 0%{?vty_group:1}
590 chown %{frr_user}:%{vty_group} %{configdir}/vtysh.conf*
591 %endif
f755bf6d 592%endif
788cdc6d 593fi
594
95c16f4c 595
788cdc6d 596%postun
fc43ecc7 597if [ "$1" -ge 1 ]; then
19ced9a4
MW
598 #
599 # Upgrade from older version
600 #
9a581ae4
MW
601 %if "%{initsystem}" == "systemd"
602 ##
603 ## Systemd Version
604 ##
c88ca85d 605 %systemd_postun_with_restart frr.service
9a581ae4
MW
606 %else
607 ##
608 ## init.d Version
609 ##
515a8ee8 610 service frr restart >/dev/null 2>&1
9a581ae4 611 %endif
e321aed1 612 :
788cdc6d 613fi
788cdc6d 614
95c16f4c 615
788cdc6d 616%preun
f755bf6d 617%if "%{initsystem}" == "systemd"
9a581ae4
MW
618 ##
619 ## Systemd Version
620 ##
c88ca85d
MW
621 if [ $1 -eq 0 ] ; then
622 %systemd_preun frr.service
9a581ae4 623 fi
f755bf6d 624%else
9a581ae4
MW
625 ##
626 ## init.d Version
627 ##
c88ca85d 628 if [ $1 -eq 0 ] ; then
515a8ee8 629 service frr stop >/dev/null 2>&1
c2953ac5 630 /sbin/chkconfig --del frr
9a581ae4 631 fi
f755bf6d 632%endif
c115e4a4 633/sbin/install-info --delete %{_infodir}/frr.info.gz %{_infodir}/dir
788cdc6d 634
95c16f4c 635
788cdc6d 636%files
b832909b 637%doc COPYING
30b9d89b 638%doc doc/mpls
f20aafee 639%doc README.md
7cad61cb 640/usr/share/yang/*.yang
c115e4a4 641%if 0%{?frr_user:1}
1dc5a0dc 642 %dir %attr(751,%{frr_user},%{frr_user}) %{configdir}
9bf7cb0b 643 %dir %attr(755,%{frr_user},%{frr_user}) %{_localstatedir}/log/frr
1dc5a0dc 644 %dir %attr(751,%{frr_user},%{frr_user}) %{rundir}
edd7c245 645%else
5f371d0b 646 %dir %attr(750,root,root) %{configdir}
9bf7cb0b 647 %dir %attr(755,root,root) %{_localstatedir}/log/frr
5f371d0b 648 %dir %attr(750,root,root) %{rundir}
edd7c245 649%endif
c115e4a4 650%{_infodir}/frr.info.gz
788cdc6d 651%{_mandir}/man*/*
54b25dca 652%{_sbindir}/zebra
7ac1de8e 653%{_sbindir}/staticd
54b25dca 654%{_sbindir}/ospfd
655%{_sbindir}/ripd
656%{_sbindir}/bgpd
2cdd3d94 657%exclude %{_sbindir}/ssd
9473e340 658%if %{with_watchfrr}
9a581ae4 659 %{_sbindir}/watchfrr
f755bf6d 660%endif
54b25dca 661%{_sbindir}/ripngd
662%{_sbindir}/ospf6d
41b86ba4
MW
663%if %{with_pimd}
664 %{_sbindir}/pimd
665%endif
1abe1280
DS
666%if %{with_pbrd}
667 %{_sbindir}/pbrd
668%endif
97b5f22b
QY
669%if %{with_vrrpd}
670 %{_sbindir}/vrrpd
671%endif
54b25dca 672%{_sbindir}/isisd
13d9aad8 673%{_sbindir}/fabricd
b021388f 674%if %{with_ldpd}
c2953ac5 675 %{_sbindir}/ldpd
b021388f 676%endif
5a76db68
MW
677%if %{with_eigrpd}
678 %{_sbindir}/eigrpd
679%endif
729f041c 680%if %{with_nhrpd}
5a76db68 681 %{_sbindir}/nhrpd
729f041c 682%endif
e763afa5
DL
683%if %{with_babeld}
684 %{_sbindir}/babeld
685%endif
7134904b
RZ
686%if %{with_bfdd}
687 %{_sbindir}/bfdd
688%endif
4d7b695d
SM
689%if %{with_pathd}
690 %{_sbindir}/pathd
74971473 691 %{_libdir}/frr/modules/pathd_pcep.so
4d7b695d 692%endif
d0df840a
MW
693%{_libdir}/libfrr.so*
694%{_libdir}/libfrrcares*
695%{_libdir}/libfrrospf*
84b05ca1 696%if %{with_fpm}
4aa7422e 697 %{_libdir}/frr/modules/zebra_fpm.so
84b05ca1 698%endif
d621815a 699%{_libdir}/frr/modules/zebra_cumulus_mlag.so
c871e6c9 700%{_libdir}/frr/modules/dplane_fpm_nl.so
4aa7422e 701%{_libdir}/frr/modules/zebra_irdp.so
ed18356f 702%{_libdir}/frr/modules/bgpd_bmp.so
788cdc6d 703%{_bindir}/*
9b979646 704%config(noreplace) %{configdir}/[!v]*.conf*
1dc5a0dc 705%config(noreplace) %attr(750,%{frr_user},%{frr_user}) %{configdir}/daemons
f755bf6d 706%if "%{initsystem}" == "systemd"
07a138ec 707 %{_unitdir}/frr.service
f755bf6d 708%else
9b979646 709 %{_initddir}/frr
f755bf6d 710%endif
9b979646
RK
711%config(noreplace) %{_sysconfdir}/pam.d/frr
712%config(noreplace) %{_sysconfdir}/logrotate.d/frr
32398f01 713%{_sbindir}/frr-reload
ea4d91bf
DL
714%{_sbindir}/frrcommon.sh
715%{_sbindir}/frrinit.sh
716%{_sbindir}/watchfrr.sh
788cdc6d 717
95c16f4c 718
448ed4a2 719%files contrib
448ed4a2 720%doc tools
721
95c16f4c 722
386fcd12 723%files pythontools
11c83aa4 724%{_sbindir}/generate_support_bundle.py
83d4df8e 725%{_sbindir}/frr-reload.py
b9c3be8b 726%{_sbindir}/frr_babeltrace.py
83d4df8e
MW
727%if 0%{?rhel} > 7 || 0%{?fedora} > 29
728%{_sbindir}/__pycache__/*
729%else
11c83aa4
SMS
730%{_sbindir}/generate_support_bundle.pyc
731%{_sbindir}/generate_support_bundle.pyo
386fcd12
MW
732%{_sbindir}/frr-reload.pyc
733%{_sbindir}/frr-reload.pyo
b9c3be8b
AK
734%{_sbindir}/frr_babeltrace.pyc
735%{_sbindir}/frr_babeltrace.pyo
83d4df8e 736%endif
386fcd12 737
95c16f4c 738
a0187fdc
MW
739%post rpki-rtrlib
740# add rpki module to daemons
741sed -i -e 's/^\(bgpd_options=\)\(.*\)\(".*\)/\1\2 -M rpki\3/' %{_sysconfdir}/frr/daemons
742
743%postun rpki-rtrlib
744# remove rpki module from daemons
745sed -i 's/ -M rpki//' %{_sysconfdir}/frr/daemons
746
747%files rpki-rtrlib
748%{_libdir}/frr/modules/bgpd_rpki.so
749
750
d0df840a
MW
751%files snmp
752%{_libdir}/libfrrsnmp.so*
753%{_libdir}/frr/modules/*snmp.so
754
755
e0626854 756%files devel
d1ef2aaf 757%{_libdir}/lib*.so
4aa7422e 758%dir %{_includedir}/%{name}
b8b18c06 759%{_includedir}/%{name}/*.h
4aa7422e 760%dir %{_includedir}/%{name}/ospfd
b8b18c06 761%{_includedir}/%{name}/ospfd/*.h
319d840c
RZ
762%if %{with_bfdd}
763 %dir %{_includedir}/%{name}/bfdd
764 %{_includedir}/%{name}/bfdd/bfddp_packet.h
765%endif
54b25dca 766%if %{with_ospfapi}
4aa7422e 767 %dir %{_includedir}/%{name}/ospfapi
b8b18c06 768 %{_includedir}/%{name}/ospfapi/*.h
68980084 769%endif
5a76db68 770%if %{with_eigrpd}
4aa7422e 771 %dir %{_includedir}/%{name}/eigrpd
b8b18c06 772 %{_includedir}/%{name}/eigrpd/*.h
5a76db68 773%endif
e0626854 774
95c16f4c 775
788cdc6d 776%changelog
c5b26b20
JAG
777* Tue Nov 4 2021 Martin Winter <mwinter@opensourcerouting.org> - %{version}
778
c2177771
DA
779* Tue Feb 1 2022 Donatas Abraitis <donatas.abraitis@gmail.com> - 8.2
780
c5b26b20
JAG
781* Tue Nov 2 2021 Jafar Al-Gharaibeh <jafar@atcorp.com> - 8.1
782- FRR 8.1 brings a long list of enhancements and fixes with 1200 commits from
783- 75 developers. Thanks to all contributers.
784- New Features:
785- Lua hooks are now feature complete, with one hook available for use (http://docs.frrouting.org/en/latest/scripting.html)
786- Improvements to SRv6 (Segment Routing over IPv6) (http://docs.frrouting.org/en/latest/zebra.html#segment-routing-ipv6)
787- Improvements to Prefix-SID (Type 5)
788- EVPN route type-5 gateway IP overlay Index (http://docs.frrouting.org/en/latest/bgp.html#evpn-overlay-index-gateway-ip)
789- OSPFv3 NSSA and NSSA totally stub areas (http://docs.frrouting.org/en/latest/ospf6d.html#ospf6-area)
790- OSPFv3 ASBR summarization (http://docs.frrouting.org/en/latest/ospf6d.html#asbr-summarisation-support-in-ospfv3)
791- OSPFv3 Graceful Restart (http://docs.frrouting.org/en/latest/ospf6d.html#graceful-restart)
792- OSPFv2 Graceful Restart (restarting mode added, helper was already implemented) (http://docs.frrouting.org/en/latest/ospfd.html#graceful-restart)
793- Behavior Changes
794- Every node in running config now has an explicit "exit" tag
795- Link bandwidth in BGP is now correctly encoded according to IEEE 754. To stay with old incorrect encoding use:
796- `neighbor PEER disable-link-bw-encoding-ieee`
797- Changelog
798- alpine:
799 Fix path for daemons file install
800- BGP:
801- Add "json" option to "show bgp as-path-access-list"
802- Add `disable-addpath-rx` knob
803- Add an ability to set extcommunity to none in route-maps
804- Add counter of displayed show bgp summary when filtering
805- Add knob to config cond-adv scanner period
806- Add route-map `match alias` command
807- Add rpki source address configuration
808- Add show bgp summary filter by neighbor or as
809- Add terse display option on show bgp summary
810- Allow for auto-completion of community alias's created
811- Bgp knob to teardown session immediately when peer is unreachable
812- Expand 'bgp default <afi>-<safi>' cmds
813- Extend evpn next hop tracking to type-1 and type-4 routes
814- Fix "no router bgp x vrf default"
815- Flowspec redirect vrf uses vrf table instead of allocated table id
816- Handle quick flaps of an evpn prefix properly
817- Initial batch of evpn lttng tracepoints
818- Limit processing to what is needed in rpki validation
819- Modify vrf/view display in show bgp summary
820- Set 4096 instead of 65535 as new max packet size for a new peer
821- Set extended msg size only if we advertised and received capability
822- Show bgp community alias in json community list output
823- Show bgp prefixes by community alias
824- Show max packet size per update-group
825- Split soft reconfigure table task into several jobs to not block vtysh
826- Store distance received from a redistribute statement
827- Update route-type-1 legend to match output
828- ISIS:
829- Fix sending of lsp with null seqno
830- lib:
831- Add "json" option to "show ip[v6] access-list"
832- Add "json" option to "show ip[v6] prefix-list"
833- Add "json" option to "show route-map"
834- Prevent grpc assert on missing yang node
835- NHRP:
836- Clear cache when shortcuts are cleared
837- Fix corrupt address being shown for shortcuts with no cache entry
838- Set prefix correctly in resolution request
839- OSPF6:
840- Add debug commands for lsa all and route all
841- Add warning log for late hello packets
842- Add write-multiplier configuration
843- Don't update router-id if at least one adjacency is full
844- Extend the "redistribute" command with more options
845- Fix issue when displaying the redistribute command
846- Fix logging of border router routes
847- Json output for database dump show command
848- Link state id in lsa database json output
849- Send lsa update immediately when ospf instance is deleted
850- OSPF:
851- Fix crash when creating vlink in unknown vrf
852- Gr conformance fix for hello packet dr election
853- Print extra lsa information in some log messages
854- Rfc conformance test case 25.23 issue fix
855- Show ip ospf route json does not shown metric and tag
856- Summary lsa is not originated when process is reset
857- pathd:
858- Handle pcinitiated configuration, main thread
859- Handle pcinitiated messages, thread controller
860- Handle srp_id correctly
861- If pce ret no-path to pcreq don't retry pcreq nor delegate
862- PBR:
863- Add `match ip-protocol [tcp|udp]`
864- Add ability to set/unset src and dest ports
865- Nhg "add" edge case for last in table range
866- Start inclusion of src and dst ports for pbrd
867- PIM:
868- Add tos/ttl check for igmp conformance
869- Allow join prune intervals to be as small as 5 seconds
870- Allow msdp group name 'default'
871- Fix register suppress timer code
872- Fix uaf/heap corruption in bsm code
873- Fix command "no ip msdp mesh-group member"
874- Igmp groups are not getting timeout
875- Igmp memberships are not querier specific
876- Igmp sockets need to be iface-bound too
877- Prevent uninited usage of nexthop
878- Support msdp global timers configuration
879- vtysh
880- Add cli timestamp '-t' flag
881- Add error code if daemon is not running
882- Fix searching commands in parent nodes
883- yang:
884- Add msdp timer configuration
885- Fix bgp multicast prefix type
886- Mark a couple of prefix-list/access-list leafs as mandatory
887- Move multicast prefix type definition
888- Replace an empty pattern with a zero-length restriction
889- Rework pim msdp mesh group
890- Simplify msdp peer handling
891- zebra :
892- Add "json" option to "show interface"
893- Various improvment to dataplane interface
894- Add message counts for `show zebra client`
895- Add nhg id to show ip route json
896- Add show command for ra interface lists
897- Fix ipv4 routes with ipv6 link local next hops install in fpm
898- Handle bridge mac address update in evpn contexts
899- Move individual lines to table in `show zebra client` command
900- Refresh vxlan evpn contexts, when bridge interface goes up
901- Update zl3vni when bridge link refreshed in other namespaces
902
903* Wed Jul 21 2021 Martin Winter <mwinter@opensourcerouting.org> - 8.0
904- Major changes
905- New daemon pathd for segment routing
906- EVPN Multihoming is now fully supported
907- OSPFv3 now supports VRFs
908- TI-LFA has been implemented in IS-IS and OSPF
909- Ability for Zebra to dump netlink messages in a human-friendly format
910- LDP gained SNMP support
911- libyang minimun version is now 2.0
912- BABEL:
913- Add `distribute-list` commands
914- Fix memory leak in connected route handling
915- BGP:
916- Add support for use of aliases with communities
917- Add support of tcp-mss for neighbors
918- Add support for EVPN Multihoming
919- Add ability to show BGP routes from a particular table version
920- Add support for for RFC 8050 (MRT add-path)
921- Add SNMP support for MPLS VPN
9bf7cb0b 922- Add `show bgp summary wide` command to show more detailed output
c5b26b20
JAG
923 on wide terminals
924- Add ability for peer-groups to have `ttl-security hops` configured
925- Add support for conditional Advertisement
926- Add support for RFC 4271 Delay Open Timer
927- Add a knob to not advertise until route is installed in fib
928- Add BGP-wide configuration for graceful shutdown
929- Add support for RFC 8654 extended messages
930- Improve RPKI reporting as well as new show commands
931- Improve handling of VRF route leaking
932- Improve scaling behavior for dynamic neighbors
933- Improve LL nexthop tracking to be interface based
934- Improve route reachability handling with respect to blackhole routes
935- Improve SNMP traps to RFC 4273 notifications
936- Improve EVPN routes to use L3 NHG's where applicable
937- Improvements to EVPN
938- Improvements to update behavior
939- Fix various issues with connection resolution
940- Fix statistics commands in some situations
941- Fix non-determistic locally-originated paths in bestpath selection
942- Continue working on transitioning to YANG/Northbound configuration
943- Various bug fixes and performance improvements
944- EIGRP:
945- Add `distribute-list` commands
946- Ensure received AS number is the same as ours in all situations
947- Properly validate TLV lengths in some situations
948- IS-IS:
949- Add ldb-sync functionality
950- Add TI-LFA functionality
951- Add support for Anycast-SID's
952- Add support for classic LFA RFC 5286
953- Add `show isis fast-reroute summary` command
954- Add support for Remote LFA RFC 7490
955- Fix Attach-bit processing in some scenarios
956- Cleanup BFD integration
957- Various bug fixes and performance improvements
958- LDP:
959- Add SNMP support
960- Support for LDP IGP Synchronization
961- Support for RLFA clients
962- Various bug fixes and performance improvements
963- LIBFRR:
964- Various bugfixes and performance improvements
965- NHRP:
966- Add `nhrp multicast-nflog-group (1-65535)` command
967- Add configuration options for vici socket path
968- Add support for forwarding multicast packets
969- Fix handling of MTU
970- Fix handling of NAT extension
971- Retry IPsec under some conditions
972- OSPFv2:
973- Add OSPF GR helper support
974- Add JSON support for various commands
975- Add `summary-address A.B.C.D/M ...` commands
976- Add `area X nssa suppress-fa` command
977- Add support for TI-LFA
978- Add support for BFD profiles
979- Add support for Traffic Engineering database
980- Add support for usage of DMPVPN with OSPF
981- Add `clear ip ospf neighbor` commands
982- Add YANG support for route-maps
983- Improvements to SNMP
984- Fixes for type 5 and type 7 LSA handling
985- Various bug fixes and performance improvements
986- OSPFv3:
987- Add support for VRFs
988- Add JSON support to a bunch of commands
989- Add ability to control maximum paths for routes
990- Add `show ipv6 ospf6 vrfs` command
991- Add support for BFD profiles
992- Fix to not send hellos on loopbacks
993- Cleanup area handling around interfaces
994- YANG support for route-maps
995- Various bug fixes and performance improvements
996- OSPFCLIENT:
997- Cleanup trust of user input
998- PATHd:
999- Add support of SR-TE policy management daemon
1000- Add optional support for PCEP to pathd
1001- Integrate PCEP-LIB into FRR
1002- PBR:
1003- Add `set installable` nhg command
1004- Improve interface up/down event handling
1005- PIM:
1006- Add YANG integration
1007- Add JSON support to various commands
1008- Add BFD profile support
1009- Fixes to IGMP conformance
1010- Fixes to behavior surrounding Prune and Prune-pending
1011- Various bug fixes and performance improvements
1012- RIPNG:
1013- Fix interface wakeup after shutdown
1014- SHARP:
1015- Add ability to use Nexthop Groups
1016- Add v4 redistribute watching
1017- Add TED support
1018- Various bug fixes
1019- STATIC:
1020- Fix nexthop handling in some situations
1021- Forbid blackhole and non-blackhole nexthops in a single route
1022- VRRP:
1023- printf formatting cleanups
1024- VTYSH:
1025- Add a `show history` command
1026- Add `show memory <daemon>` support
1027- Start deprecation cycle for `address-family evpn`
1028- Display version with --help
1029- Various bug fixes
1030- WATCHFRR:
1031- Fix some crashes
1032- ZEBRA:
1033- Add JSON support to various commands
1034- Add Human readable netlink dumps
1035- Add L2 NHG support
1036- Add support for LSPs to FPM dataplane
1037- Add ability for other protocol daemons to install nexthop groups into the kernel
1038- Add YANG support for route-maps
1039- Improve scale performance when handling a large number of VRF's
1040- Improve network namespace handling
1041- Improve asic-offload handling
1042- Improve FreeBSD interface and route handling
1043- Improve handling of neighbors in kernel dataplane plugin
1044- Improve label manager
1045- Improve route-map processing
1046- Improve debug-ability of routes and VRFs
1047- Improve FPM dataplane plugin
1048- Improve handling of reachability / nexthop tracking on shutdown interfaces
1049- Improve EVPN support
1050- Fix startup handling of `set src X`
1051- Various bug fixes and performance improvements
1052
1053* Wed Mar 3 2021 Martin Winter <mwinter@opensourcerouting.org> - 7.5.1
1054- BABEL:
1055- Fix connected route leak on change
1056- BFD:
1057- Session lookup was sometimes wrong
1058- Memory leak and handling cleanups
1059- In some situations handle vrf appropriately when receiving packets
1060- BGP:
1061- Peer Group Inheritance Fixes
1062- Dissallow attempt to peer peers reachable via blackholes
1063- Send BMP down message when reachability fails
1064- Cleanup handling of aggregator data when the AGG AS is 0
1065- Handle `neighbor <peer-group allowas-in` config changes properly
1066- Properly parse community and lcommunity values in some circumstances
1067- Allow peer-groups to configure `ttl-security hops`
1068- Prevent v6 routes with v4 nexthops from being installed
1069- Allow `default-originate` to be cleared from a peer group
1070- Fix evpn route-map vni filter at origin
1071- local routes were using non-default distance
1072- Properly track if the nexthop was updated in some circumstances
1073- Cleanup `show running` when running bgp with `-e X` values
1074- Various Memory leaks in show commands
1075- Properly withdraw exported routes when deleting a VRF
1076- Avoid resetting ebgp-multihop if peer setting is the same as peer-group
1077- Properly encode flowspec rules to zebra in some rare circumstances
1078- Generate statistics for routes in bgp when we have exactly 1 route
1079- Properly apply route-map for the default-originate command
1080- EIGRP:
1081- Properly set MTU for eigrp packets sent
1082- Various memory leaks and using uninited data fixes
1083- ISIS:
1084- When last area address is removed, resign if we were the DR
1085- Various memory leaks and using uninited data fixes
1086- LDP:
1087- Various memory leaks and using uninited data fixes
1088- NHRP:
1089- Use onlink routes when prefix == nh
1090- Shortcut routes are installed with proper nexthop
1091- OSPF:
1092- Prevent duplicate packet read in multiple vrf situation
1093- Fix area removal at interface level
1094- Restore Point to MultiPoint interface types
1095- Correctly handle MTU change on startup
1096- Multi Instance initialization sometimes was not successful
1097- NSSA translate-always was not working properly
1098- OSPFv3:
1099- Don't send hellos on loopback interfaces
1100- Handle ECMP better when a sub-path is removed
1101- Memory leak and handling fixes
1102- Fix Link LSA not updating when router priority is modified
1103- Some output from show commands was wrong
1104- Intra area remote connected prefixes sometimes not installed
1105- PBR:
1106- Various memory leaks and using uninited data fixes
1107- PIM:
1108- SGRpt prune received during prune didn't override holdtime
1109- Various memory leaks and using uninited data fixes
1110- STATIC:
1111- Fix VRF and usage on startup in some instances
1112- Tableid was being mishandled in some cases
1113- VTYSH:
1114- Disable bracketed paste in readline.
1115- WATCHFRR:
1116- Various memory leaks and using uninited data fixes
1117- ZEBRA:
1118- Always install blackhole routes using kernel routes instead of nexthops
1119- Various memory leaks and using uninited data fixes
1120- Dissallow resolution to duplicate nexthops that created infinite nexthops
1121- Apply the route-map delay-timer globally
1122- Some routes were stuck in Queued state when using the FPM
1123- Better handle vrf creation when using namespaces
1124- Set NUD_NOARP on sticky mac entries in addtion to NTF_STICKY
1125- Allow `set src X` to work on startup
1126- FRR Library:
1127- Fix a variety of memory leaks
1128- Fix VRF Creation in some instances
1129- RPKI context editing was not properly handled in reload situations
1130- routemap code was not properly handling modification of CLI in some instances
1131- SNAPCRAFT:
1132- Update to using rtrlib 0.7.0
1133- Fix passthrough path for Libyang 1.x
1134- ALPINE:
1135- Remove old docker deps
1136
1137* Mon Nov 2 2020 Donald Sharp <sharpd@nvidia.com> - 7.5
1138- BFD
1139- Profile support
1140- Minimum ttl support
1141- BGP
1142- rpki VRF support
1143- GR fixes
1144- Add wide option to display of routes
1145- Add `maximum-prefix <num> force`
1146- Add `bestpath-routes` to neighbor command
1147- Add `bgp shutdown message MSG...` command
1148- Add v6 Flowspec support
1149- Add `neighbor <neigh> shutdown rtt` command
1150- Allow update-delay to be applied globaly
1151- EVPN
1152- Beginning of MultiHoming Support
1153- ISIS
1154- Segment Routing Support
1155- VRF Support
1156- Guard against adj timer display overflow
1157- Add support for Anycast-SIDs
1158- Add support for Topology Independent LFA (TI-LFA)
1159- Add `lsp-gen-interval 2` to isis configuration
1160- OSPF
1161- Segment Routing support for ECMP
1162- Various LSA fixes
1163- Prevent crash if transferring config amongst instances
1164- PBR
1165- Adding json support to commands
1166- DSCP/ECN based PBR Matching
1167- PIM
1168- Add more json support to commands
1169- Fix missing mesh-group commands
1170- MSDP SA forwarding
1171- Clear (s,g,rpt) ifchannel on (*, G) prune received
1172- Fix igmp querier election and IP address mapping
1173- Crash fix when RP is removed
1174- STATIC
1175- Northbound Support
1176- YANG
1177- Filter and route-map Support
1178- OSPF model definition
1179- BGP model definition
1180- VTYSH
1181- Speed up output across daemons
1182- Fix build-time errors for some --enable flags
1183- Speed up output of configuration across daemons
1184- ZEBRA
1185- nexthop group support for FPM
1186- northbound support for rib model
1187- Backup nexthop support
1188- netlink batching support
1189- Allow upper level protocols to request ARP
1190- Add json output for zebra ES, ES-EVI and access vlan dumps
1191-
1192- Upgrade to using libyang1.0.184
1193-
1194- RPM
1195- Moved RPKI to subpackage
1196- Added SNMP subpackage
1197-
1198- As always there are too many bugfixes to list individually. This release
1199- compromises just over 1k of commits by the community, with contributors from
1200- 70 people.
3ad504d6
MW
1201
1202* Tue Jun 30 2020 Martin Winter <mwinter@opensourcerouting.org> - 7.4
1203- BGPd
1204- Use sequence numbers for community lists
1205- Fixes to nexthop groups
1206- Add feature to limit outgoing number of routes
1207- Per Neighbor Graceful Restart
1208- Multiple Graceful Restart fixes
1209- Support sub-Type-4 and sub-Type-5 for the VPNv4 SRv6 backend
1210- rfc7606 support: treat certain malformed routes as withdraw
1211- allow origin override for route aggregates
1212- rfc6608 support: Subcodes for BGP Finite State Machine Error
1213- rfc7607 support: Codification of AS 0 Processing
1214- rfc6286 support: Autonomous-System-Wide Unique BGP Identifier for BGP-4
1215- Unequal cost multipath (a.ka. weighted ECMP) with BGP link-bandwidth
1216- Enable rfc8212 by default except datacenter profile
1217- staticd
1218- Add debug support
1219- vtysh
1220- Add copy command to copy config from file into running config
1221- LDPd
1222- adding support for LDP ordered label distribution control
1223- ISISd
1224- IS-IS Segment Routing support
1225- SHARPd
1226- add initial support to add/remove lsps
1227- Zebra
1228- fix broadcast address in IPv4 networks with /31 mask
1229- Add Graceful Restart support for Protocol Daemon restarts
1230- lib
1231- migrate route-maps to use northbound interface
1232- plus countless bug fixes and other improvements
1233
4d7b695d
SM
1234* Mon Jun 15 2020 Sascha Kattelmann <sascha@netdef.org>
1235- Add Pathd support
1236
3ad504d6
MW
1237* Wed May 06 2020 David Lamparter <equinox@opensourcerouting.org> - 7.3.1
1238- upstream 7.3.1
1239
1240* Fri Feb 14 2020 Martin Winter <mwinter@opensourcerouting.org> - 7.3
1241- BGPd
1242- EVPN PIP Support
1243- Route Aggregation code speed ups
1244- BGP Vector I/O speed ups
1245- New CLI: `set distance XXX`
1246- New CLI: `aggregate-address A.B.C.D/M route-map WORD`
1247- New CLI: `bgp reject-as-sets`
1248- New CLI: `advertise pip ...`
1249- New CLI: `match evpn rd ASN:NN_OR_IP-ADDRESS:NN`
1250- New CLI: `show bgp l2vpn evpn community|large-community X`
1251- New CLI: `show bgp l2vpn evpn A.B.C.D`
1252- Auto-completion for clear bgp command
1253- Add ability to set tcp socket buffer size
1254- OSPFd
1255- Partial MPLS TE support
1256- PBRd
1257- New CLI: `set vrf unchanged|NAME`
1258- BFDd
1259- VRF Support
1260- New CLI: 'show bfd peers brief'
1261- New CLI: 'clear bfd peer ...'
1262- PIMd
1263- Significant Speedups in accessing Internal Data for higher scale
1264- Support for joining any-source Multicast
1265- Updated CLI: 'show ip pim upstream-join-desired'
1266- New CLI: 'show ip pim channel'
1267- Debug Cleanup
1268- MLAG experimental support
1269- VRRPd
1270- VRF Support
1271- Northbound Conversion- NHRPd
1272- LDPd
1273- vtysh
1274- New CLI: `banner motd line LINE...`
1275- yang
1276- New CLI: `show yang operational-data XPATH`
1277- New CLI: `debug northbound`
1278- Zebra
1279- Nexthop Group support
1280- New CLI: 'debug zebra nexthop [detail]'
1281- New CLI: 'show router-id'
1282- MLAG experimental support
1283- watchfrr
1284- Additional status messages of system state to systemd
1285- New CLI: `watchfrr ignore DAEMON`
1286- Others
1287- As always all daemons have received too many bug fixes to fully list
1288- There has been a significant focus on increasing test coverage
1289- Change in Behavior:
1290- ISISd
1291- All areas created default automatically to level-1-2
1292- Zebra
1293- Nexthop Group Installation in Kernel is turned on by default
1294 if the kernel supports- New CLI: 'show nexthop-group rib [singleton]'
1295- Man Pages
1296- Renamed to frr-* to remove collision with other packages
1297
1298* Fri Jan 17 2020 Martin Winter <mwinter@opensourcerouting.org> - 7.2.1
1299- BGPd
1300- Fix Addpath issue
1301- Do not apply eBGP policy for iBGP peers
1302- Show `ip` and `fqdn` in json output for `show [ip] bgp <route> json`
1303- Fix large route-distinguisher's format
1304- Fix `no bgp listen range ...` configuration command
1305- Autocomplete neighbor for clear bgp
1306- Reflect the distance in RIB when it is changed for an arbitrary afi/safi
1307- Notify "Peer De-configured" after entering 'no neighbor <neighbor> cmd
1308- Fix per afi/safi addpath peer counting
1309- Rework BGP dampening to be per AFI/SAFI
1310- Do not send next-hop as :: in MP_REACH_NLRI if no link-local exists
1311- Override peer's TTL only if peer-group is configured with TTL
1312- Remove error message for unkown afi/safi combination
1313- Keep the session down if maximum-prefix is reached
1314- OSPFd
1315- Fix BFD down not tearing down OSPF adjacency for point-to-point net
1316- BFDd
1317- Fix multiple VRF handling
1318- VRF security improvement
1319- PIMd
1320- Fix rp crash
1321- NHRPd
1322- Make sure `no ip nhrp map <something>` works as expected
1323- LDPd
1324- Add missing sanity check in the parsing of label messages
1325- Zebra
1326- Use correct state when installing evpn macs
1327- Capture dplane plugin flags
1328- lib
1329- Fix interface config when vrf changes
1330- Fix Interface Infinite Loop Walk (for special interfaces such as bond)
1331- snapcraft
1332- fix missing vrrpd daemon
1333- Others
1334- Rename man pages (to avoid conflicts with other packages)
1335- Various other fixes for code cleanup and memory leaks
1336
3f5c15f6
DA
1337* Fri Dec 27 2019 Donatas Abraitis <donatas.abraitis@gmail.com>
1338- Add CentOS 8 support
1339
3ad504d6
MW
1340* Tue Oct 15 2019 Martin Winter <mwinter@opensourcerouting.org> - 7.2
1341- ALL Daemons
1342- -N <namespace> to allow for config file locating when running FRR inside
1343 of a namespace
1344- Impoved Testing across all daemons
1345- BFD
1346- VRF Support
1347- Conversion to Northbound interface
1348- BGP
1349- Aggregate-address add route-map support
1350- BMP Support
1351- Improved JSON output for many commands
1352- `show bgp afi safi summary failed` command
1353- `clear bop *` clears all peers
1354- Show FQDN for `show bgp ipv4 uni` commands
1355- Display BestPath selection reason as part of show commands
1356- EIGRP
1357- Infrastructure changes to allow VRF's
1358- SIGHUP signals the config reload
1359- Conversion to Northbound interface
1360- ISIS
1361- BFD Support
1362- Support for circuits with MTU > 8192
1363- PBRD
1364- fwmark support as part of match criteria
1365- autocompletion of PBRMAPS
1366- Improved Nexthop Support
1367- PIMD
1368- PIM-BSM receive support
1369- Improved debugging support
1370- Store ECMP paths that are not currently legal for use
1371- Disallow igmp query from a non-connected source
1372- Many new cli improvements and changes
1373- VRRPD
1374- Add Support for RFC 3768 and RFC 5798
1375- Route-Maps
1376- Add sequence numbers to access-lists
1377- Add `match ip next-hop type blackhole`
1378- Improved ability to notice dependency changes
1379- SHARPD
1380- `sharp watch [import|nexthop]` you can now specify a prefix instead
1381 of assuming a /32
1382- STATICD
1383- Significantly Improved NHT
1384- ZEBRA
1385- Many dataplane improvements for routes, neighbor table and EVPN
1386- NHT cli can now be specified per VRF and improved ability to control
1387 NHT data being shown
1388- Removed duplicate processing of routes
1389- Improved debugablility
1390- RMAC and VxLan support for the FPM
1391- LIB
1392- RCU support
1393- Nexthop Group Improvements
1394- `log-filter WORD` added
1395- Building
1396- openssl support
1397- libcap should be used as part of build or significant slowdowns
1398 will be experienced
1399- Lua builds have been fixed
1400- Improved Cross building
1401
1402* Mon Jun 17 2019 David Lamparter <equinox@opensourcerouting.org> - 7.1
1403- gRPC northbound plugin
1404- "table NNN" removed from zebra
1405- more dataplane MT work
1406- EVPN in non-default VRFs
1407- RFC 8212 (default deny policy for eBGP)
1408- RFC 8106 (IPv6 RA DNS options)
1409
1410* Wed May 8 2019 Martin Winter <mwinter@opensourcerouting.org> - 7.0.1
1411- bgp:
1412- Don't send Updates with BGP Max-Prefix Overflow
1413- Make sure `next-hop-self all` backward compatible with force
1414- Fix as-path validation in "show bgp regexp"
1415- Fix interface-based peers to override peergroups
1416- Fix removing private AS numbers if local-as is used
1417- Fix show bgp labeled_unicast
1418- Add command to lookup prefixes in rpki table
1419- Fix peer count in "show bgp ipv6 summary"
1420- Add missing ipv6 only peer flag action
1421- Fix address family output in "show bgp [ipv4|ipv6] neighbors"
1422- Add missing checks for vpnv6 nexthops
1423- Fix nexthop for ipv6 vpn case
1424- rip: Fix removal of passive interfaces
1425- ospf:
1426- Fix json timer output
1427- Fix milliseconds in json output
1428- bfd:
1429- Fix source port according RFC 5881, Sec 4
1430- Fix IPv6 link-local peer removal
1431- Fix interface clean up when deleting interface
1432- pim: Fix interface clean up when deleting interface
1433- nhrp: Fix interface clean up when deleting interface
1434- lib:
1435- Workaround to get FRR building with libyang 0.x and 1.x
1436- Fix in priv handling
1437- Make priv elevation thread-safe
1438- zebra:
1439- Pseudowire event recovery
1440- Fix race condition in label manager
1441- Fix system routes selection and next-hop tracking
1442- Set connected route metric based on devaddr metric
1443- Display metric for connected routes
1444- Add selected fib details to json output
1445- Always use replace if installing new route
1446- watchfrr: Silently ignore declare failures (for backward compatibility)
1447- RPM packages: Switch to new init script
1448
1449* Thu Feb 28 2019 Martin Winter <mwinter@opensourcerouting.org> - 7.0
1450- Added libyang dependency: New work for northbound interface based on libyang
1451- Fabricd: New Daemon based on https://datatracker.ietf.org/doc/draft-white-openfabric/
1452- various bug fixes and other enhancements
1453
1454* Sun Oct 7 2018 Martin Winter <mwinter@opensourcerouting.org> - 6.0
1455- Staticd: New daemon responsible for management of static routes
1456- ISISd: Implement dst-src routing as per draft-ietf-isis-ipv6-dst-src-routing
1457- BFDd: new daemon for BFD (Bidrectional Forwarding Detection). Responsible
1458 for notifying link changes to make routing protocols converge faster.
1459- various bug fixes
1460
1461* Thu Jul 5 2018 Martin Winter <mwinter@opensourcerouting.org> - 5.0.1
1462- Support Automake 1.16.1
1463- BGPd: Support for flowspec ICMP, DSCP, packet length, fragment and tcp flags
1464- BGPd: fix rpki validation for ipv6
1465- VRF: Workaround for kernel bug on Linux 4.14 and newer
1466- Zebra: Fix interface based routes from zebra not marked up
1467- Zebra: Fix large zebra memory usage when redistribute between protocols
1468- Zebra: Allow route-maps to match on source instance
1469- BGPd: Backport peer-attr overrides, peer-level enforce-first-as and filtered-routes fix
1470- BGPd: fix for crash during display of filtered-routes
1471- BGPd: Actually display labeled unicast routes received
1472- Label Manager: Fix to work correctly behind a label manager proxy
1473
1474* Thu Jun 7 2018 Martin Winter <mwinter@opensourcerouting.org> - 5.0
1475- PIM: Add a Multicast Trace Command draft-ietf-idmr-traceroute-ipm-05
1476- IS-IS: Implement Three-Way Handshake as per RFC5303
1477- BGPD: Implement VPN-VRF route leaking per RFC4364.
1478- BGPD: Implement VRF with NETNS backend
1479- BGPD: Flowspec
1480- PBRD: Add a new Policy Based Routing Daemon
1481
1482* Mon May 28 2018 Rafael Zalamena <rzalamena@opensourcerouting.org>
7134904b
RZ
1483- Add BFDd support
1484
bc1dc4fe 1485* Sun May 20 2018 Martin Winter <mwinter@opensourcerouting.org>
b4c554e2
MW
1486- Fixed RPKI RPM build
1487
1488* Sun Mar 4 2018 Martin Winter <mwinter@opensourcerouting.org>
aaf38c94
MW
1489- Add option to build with RPKI (default: disabled)
1490
1491* Tue Feb 20 2018 Martin Winter <mwinter@opensourcerouting.org>
609dee9d
MW
1492- Adapt to new documentation structure based on Sphinx
1493
1494* Fri Oct 20 2017 Martin Winter <mwinter@opensourcerouting.org>
75429e11 1495- Fix script location for watchfrr restart functions in daemon config
c88ca85d 1496- Fix postun script to restart frr during upgrade
75429e11
MW
1497
1498* Mon Jun 5 2017 Martin Winter <mwinter@opensourcerouting.org>
5a76db68
MW
1499- added NHRP and EIGRP daemon
1500
1501* Mon Apr 17 2017 Martin Winter <mwinter@opensourcerouting.org>
41b86ba4
MW
1502- new subpackage frr-pythontools with python 2.7 restart script
1503- remove PIMd from CentOS/RedHat 6 RPM packages (won't work - too old)
2cdd3d94 1504- converted to single frr init script (not per daemon) based on debian init script
150e7c7e 1505- created systemd service file for systemd based systems (which uses init script)
41b86ba4
MW
1506- Various other RPM package fixes for FRR 2.0
1507
1508* Fri Jan 6 2017 Martin Winter <mwinter@opensourcerouting.org>
447a8fe9 1509- Renamed to frr for FRRouting fork of Quagga
c115e4a4 1510
150e7c7e 1511* Thu Feb 11 2016 Paul Jakma <paul@jakma.org>
30da4585
PJ
1512- remove with_ipv6 conditionals, always build v6
1513- Fix UTF-8 char in spec changelog
1514- remove quagga.pam.stack, long deprecated.
1515
f755bf6d
MW
1516* Thu Oct 22 2015 Martin Winter <mwinter@opensourcerouting.org>
1517- Cleanup configure: remove --enable-ipv6 (default now), --enable-nssa,
1518 --enable-netlink
1519- Remove support for old fedora 4/5
1520- Fix for package nameing
1521- Fix Weekdays of previous changelogs (bogus dates)
150e7c7e 1522- Add conditional logic to only build tex footnotes with supported texi2html
f755bf6d
MW
1523- Added pimd to files section and fix double listing of /var/lib*/quagga
1524- Numerous fixes to unify upstart/systemd startup into same spec file
9473e340 1525- Only allow use of watchfrr for non-systemd systems. no need with systemd
f755bf6d
MW
1526
1527* Fri Sep 4 2015 Paul Jakma <paul@jakma.org>
7c08d77f
PJ
1528- buildreq updates
1529- add a default define for with_pimd
1530
f755bf6d 1531* Mon Sep 12 2005 Paul Jakma <paul@dishone.st>
e7cd37bf 1532- Steal some changes from Fedora spec file:
1533- Add with_rtadv variable
1534- Test for groups/users with getent before group/user adding
1535- Readline need not be an explicit prerequisite
1536- install-info delete should be postun, not preun
1537
fc43ecc7 1538* Wed Jan 12 2005 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
1539- on package upgrade, implement careful, phased restart logic
1540- use gcc -rdynamic flag when linking for better backtraces
1541
f3931751 1542* Wed Dec 22 2004 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
1543- daemonv6_list should contain only IPv6 daemons
1544
b3324e27 1545* Wed Dec 22 2004 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
9473e340 1546- watchfrr added
b3324e27 1547- on upgrade, all daemons should be condrestart'ed
1548- on removal, all daemons should be stopped
1549
36002ae5 1550* Mon Nov 08 2004 Paul Jakma <paul@dishone.st>
1551- Use makeinfo --html to generate quagga.html
1552
0df63b52 1553* Sun Nov 07 2004 Paul Jakma <paul@dishone.st>
1554- Fix with_ipv6 set to 0 build
1555
cfc1842b 1556* Sat Oct 23 2004 Paul Jakma <paul@dishone.st>
1557- Update to 0.97.2
1558
1559* Sat Oct 23 2004 Andrew J. Schorr <aschorr@telemetry-investments.com>
1560- Make directories be owned by the packages concerned
1561- Update logrotate scripts to use correct path to killall and use pid files
1562
da29c6b0 1563* Fri Oct 08 2004 Paul Jakma <paul@dishone.st>
1564- Update to 0.97.0
1565
54b25dca 1566* Wed Sep 15 2004 Paul Jakma <paul@dishone.st>
1567- build snmp support by default
1568- build irdp support
1569- build with shared libs
1570- devel subpackage for archives and headers
1571
00bc5603 1572* Thu Jan 08 2004 Paul Jakma <paul@dishone.st>
1573- updated sysconfig files to specify local dir
1574- added ospf_dump.c crash quick fix patch
1575- added ospfd persistent interface configuration patch
1576
15d74e93 1577* Tue Dec 30 2003 Paul Jakma <paul@dishone.st>
1578- sync to CVS
1579- integrate RH sysconfig patch to specify daemon options (RH)
1580- default to have vty listen only to 127.1 (RH)
1581- add user with fixed UID/GID (RH)
1582- create user with shell /sbin/nologin rather than /bin/false (RH)
1583- stop daemons on uninstall (RH)
f755bf6d 1584- delete info file on preun, not postun to avoid deletion on upgrade. (RH)
15d74e93 1585- isisd added
1586- cleanup tasks carried out for every daemon
1587
406f7000 1588* Sun Nov 2 2003 Paul Jakma <paul@dishone.st>
1589- Fix -devel package to include all files
1590- Sync to 0.96.4
1591
6bd8fd3b 1592* Tue Aug 12 2003 Paul Jakma <paul@dishone.st>
1593- Renamed to Quagga
1594- Sync to Quagga release 0.96
1595
f755bf6d 1596* Thu Mar 20 2003 Paul Jakma <paul@dishone.st>
edd7c245 1597- zebra privileges support
1598
f755bf6d 1599* Tue Mar 18 2003 Paul Jakma <paul@dishone.st>
e0626854 1600- Fix mem leak in 'show thread cpu'
1601- Ralph Keller's OSPF-API
1602- Amir: Fix configure.ac for net-snmp
1603
448ed4a2 1604* Sat Mar 1 2003 Paul Jakma <paul@dishone.st>
1605- ospfd IOS prefix to interface matching for 'network' statement
1606- temporary fix for PtP and IPv6
1607- sync to zebra.org CVS
1608
8f754983 1609* Mon Jan 20 2003 Paul Jakma <paul@dishone.st>
1610- update to latest cvs
1611- Yon's "show thread cpu" patch - 17217
1612- walk up tree - 17218
1613- ospfd NSSA fixes - 16681
1614- ospfd nsm fixes - 16824
150e7c7e 1615- ospfd OLSA fixes and new feature - 16823
8f754983 1616- KAME and ifindex fixes - 16525
1617- spec file changes to allow redhat files to be in tree
1618
d7ccae28 1619* Sat Dec 28 2002 Alexander Hoogerhuis <alexh@ihatent.com>
1620- Added conditionals for building with(out) IPv6, vtysh, RIP, BGP
1621- Fixed up some build requirements (patch)
1622- Added conditional build requirements for vtysh / snmp
f755bf6d 1623- Added conditional to files for _bindir depending on vtysh
d7ccae28 1624
788cdc6d 1625* Mon Nov 11 2002 Paul Jakma <paulj@alphyra.ie>
1626- update to latest CVS
1627- add Greg Troxel's md5 buffer copy/dup fix
1628- add RIPv1 fix
1629- add Frank's multicast flag fix
1630
1631* Wed Oct 09 2002 Paul Jakma <paulj@alphyra.ie>
1632- update to latest CVS
1633- timestamped crypt_seqnum patch
1634- oi->on_write_q fix
1635
1636* Mon Sep 30 2002 Paul Jakma <paulj@alphyra.ie>
1637- update to latest CVS
1638- add vtysh 'write-config (integrated|daemon)' patch
1639- always 'make rebuild' in vtysh/ to catch new commands
1640
1641* Fri Sep 13 2002 Paul Jakma <paulj@alphyra.ie>
1642- update to 0.93b
1643
1644* Wed Sep 11 2002 Paul Jakma <paulj@alphyra.ie>
1645- update to latest CVS
1646- add "/sbin/ip route flush proto zebra" to zebra RH init on startup
1647
1648* Sat Aug 24 2002 Paul Jakma <paulj@alphyra.ie>
1649- update to current CVS
1650- add OSPF point to multipoint patch
1651- add OSPF bugfixes
1652- add BGP hash optimisation patch
1653
1654* Fri Jun 14 2002 Paul Jakma <paulj@alphyra.ie>
1655- update to 0.93-pre1 / CVS
1656- add link state detection support
1657- add generic PtP and RFC3021 support
1658- various bug fixes
1659
1660* Thu Aug 09 2001 Elliot Lee <sopwith@redhat.com> 0.91a-6
1661- Fix bug #51336
1662
f755bf6d 1663* Wed Aug 1 2001 Trond Eivind Glomsrød <teg@redhat.com> 0.91a-5
788cdc6d 1664- Use generic initscript strings instead of initscript specific
1665 ( "Starting foo: " -> "Starting $prog:" )
1666
1667* Fri Jul 27 2001 Elliot Lee <sopwith@redhat.com> 0.91a-4
1668- Bump the release when rebuilding into the dist.
1669
1670* Tue Feb 6 2001 Tim Powers <timp@redhat.com>
1671- built for Powertools
1672
150e7c7e 1673* Sun Feb 4 2001 Pekka Savola <pekkas@netcore.fi>
788cdc6d 1674- Hacked up from PLD Linux 0.90-1, Mandrake 0.90-1mdk and one from zebra.org.
1675- Update to 0.91a
1676- Very heavy modifications to init.d/*, .spec, pam, i18n, logrotate, etc.
1677- Should be quite Red Hat'isque now.