[mirror_ubuntu-jammy-kernel.git] / scripts / Kbuild.include

# SPDX-License-Identifier: GPL-2.0
####
# kbuild: Generic definitions

# Convenient variables
comma   := ,
quote   := "
squote  := '
empty   :=
space   := $(empty) $(empty)
space_escape := _-_SPACE_-_
pound := \#

###
# Name of target with a '.' as filename prefix. foo/bar.o => foo/.bar.o
dot-target = $(dir $@).$(notdir $@)

###
# The temporary file to save gcc -MMD generated dependencies must not
# contain a comma
depfile = $(subst $(comma),_,$(dot-target).d)

###
# filename of target with directory and extension stripped
basetarget = $(basename $(notdir $@))

###
# real prerequisites without phony targets
real-prereqs = $(filter-out $(PHONY), $^)

###
# Escape single quote for use in echo statements
escsq = $(subst $(squote),'\$(squote)',$1)

###
# Quote a string to pass it to C files. foo => '"foo"'
stringify = $(squote)$(quote)$1$(quote)$(squote)

###
# Easy method for doing a status message
       kecho := :
 quiet_kecho := echo
silent_kecho := :
kecho := $($(quiet)kecho)

###
# filechk is used to check if the content of a generated file is updated.
# Sample usage:
#
# filechk_sample = echo $(KERNELRELEASE)
# version.h: FORCE
#	$(call filechk,sample)
#
# The rule defined shall write to stdout the content of the new file.
# The existing file will be compared with the new one.
# - If no file exist it is created
# - If the content differ the new file is used
# - If they are equal no change, and no timestamp update
# - stdin is piped in from the first prerequisite ($<) so one has
#   to specify a valid file as first prerequisite (often the kbuild file)
define filechk
	$(Q)set -e;						\
	mkdir -p $(dir $@);					\
	trap "rm -f $(dot-target).tmp" EXIT;			\
	{ $(filechk_$(1)); } > $(dot-target).tmp;		\
	if [ ! -r $@ ] || ! cmp -s $@ $(dot-target).tmp; then	\
		$(kecho) '  UPD     $@';			\
		mv -f $(dot-target).tmp $@;			\
	fi
endef

######
# gcc support functions
# See documentation in Documentation/kbuild/makefiles.rst

# cc-cross-prefix
# Usage: CROSS_COMPILE := $(call cc-cross-prefix, m68k-linux-gnu- m68k-linux-)
# Return first <prefix> where a <prefix>gcc is found in PATH.
# If no gcc found in PATH with listed prefixes return nothing
#
# Note: '2>/dev/null' is here to force Make to invoke a shell. Otherwise, it
# would try to directly execute the shell builtin 'command'. This workaround
# should be kept for a long time since this issue was fixed only after the
# GNU Make 4.2.1 release.
cc-cross-prefix = $(firstword $(foreach c, $(1), \
			$(if $(shell command -v -- $(c)gcc 2>/dev/null), $(c))))

# output directory for tests below
TMPOUT := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/)

# try-run
# Usage: option = $(call try-run, $(CC)...-o "$$TMP",option-ok,otherwise)
# Exit code chooses option. "$$TMP" serves as a temporary file and is
# automatically cleaned up.
try-run = $(shell set -e;		\
	TMP="$(TMPOUT).$$$$.tmp";	\
	TMPO="$(TMPOUT).$$$$.o";	\
	if ($(1)) >/dev/null 2>&1;	\
	then echo "$(2)";		\
	else echo "$(3)";		\
	fi;				\
	rm -f "$$TMP" "$$TMPO")

# as-option
# Usage: cflags-y += $(call as-option,-Wa$(comma)-isa=foo,)

as-option = $(call try-run,\
	$(CC) $(KBUILD_CFLAGS) $(1) -c -x assembler /dev/null -o "$$TMP",$(1),$(2))

# as-instr
# Usage: cflags-y += $(call as-instr,instr,option1,option2)

as-instr = $(call try-run,\
	printf "%b\n" "$(1)" | $(CC) $(KBUILD_AFLAGS) -c -x assembler -o "$$TMP" -,$(2),$(3))

# __cc-option
# Usage: MY_CFLAGS += $(call __cc-option,$(CC),$(MY_CFLAGS),-march=winchip-c6,-march=i586)
__cc-option = $(call try-run,\
	$(1) -Werror $(2) $(3) -c -x c /dev/null -o "$$TMP",$(3),$(4))

# Do not attempt to build with gcc plugins during cc-option tests.
# (And this uses delayed resolution so the flags will be up to date.)
CC_OPTION_CFLAGS = $(filter-out $(GCC_PLUGINS_CFLAGS),$(KBUILD_CFLAGS))

# cc-option
# Usage: cflags-y += $(call cc-option,-march=winchip-c6,-march=i586)

cc-option = $(call __cc-option, $(CC),\
	$(KBUILD_CPPFLAGS) $(CC_OPTION_CFLAGS),$(1),$(2))

# cc-option-yn
# Usage: flag := $(call cc-option-yn,-march=winchip-c6)
cc-option-yn = $(call try-run,\
	$(CC) -Werror $(KBUILD_CPPFLAGS) $(CC_OPTION_CFLAGS) $(1) -c -x c /dev/null -o "$$TMP",y,n)

# cc-disable-warning
# Usage: cflags-y += $(call cc-disable-warning,unused-but-set-variable)
cc-disable-warning = $(call try-run,\
	$(CC) -Werror $(KBUILD_CPPFLAGS) $(CC_OPTION_CFLAGS) -W$(strip $(1)) -c -x c /dev/null -o "$$TMP",-Wno-$(strip $(1)))

# cc-ifversion
# Usage:  EXTRA_CFLAGS += $(call cc-ifversion, -lt, 0402, -O1)
cc-ifversion = $(shell [ $(CONFIG_GCC_VERSION)0 $(1) $(2)000 ] && echo $(3) || echo $(4))

# ld-option
# Usage: KBUILD_LDFLAGS += $(call ld-option, -X, -Y)
ld-option = $(call try-run, $(LD) $(KBUILD_LDFLAGS) $(1) -v,$(1),$(2),$(3))

# ld-version
# Note this is mainly for HJ Lu's 3 number binutil versions
ld-version = $(shell $(LD) --version | $(srctree)/scripts/ld-version.sh)

# ld-ifversion
# Usage:  $(call ld-ifversion, -ge, 22252, y)
ld-ifversion = $(shell [ $(ld-version) $(1) $(2) ] && echo $(3) || echo $(4))

######

###
# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.build obj=
# Usage:
# $(Q)$(MAKE) $(build)=dir
build := -f $(srctree)/scripts/Makefile.build obj

###
# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.dtbinst obj=
# Usage:
# $(Q)$(MAKE) $(dtbinst)=dir
dtbinst := -f $(srctree)/scripts/Makefile.dtbinst obj

###
# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=
# Usage:
# $(Q)$(MAKE) $(clean)=dir
clean := -f $(srctree)/scripts/Makefile.clean obj

# echo command.
# Short version is used, if $(quiet) equals `quiet_', otherwise full one.
echo-cmd = $(if $($(quiet)cmd_$(1)),\
	echo '  $(call escsq,$($(quiet)cmd_$(1)))$(echo-why)';)

# printing commands
cmd = @set -e; $(echo-cmd) $(cmd_$(1))

###
# if_changed      - execute command if any prerequisite is newer than
#                   target, or command line has changed
# if_changed_dep  - as if_changed, but uses fixdep to reveal dependencies
#                   including used config symbols
# if_changed_rule - as if_changed but execute rule instead
# See Documentation/kbuild/makefiles.rst for more info

ifneq ($(KBUILD_NOCMDDEP),1)
# Check if both commands are the same including their order. Result is empty
# string if equal. User may override this check using make KBUILD_NOCMDDEP=1
cmd-check = $(filter-out $(subst $(space),$(space_escape),$(strip $(cmd_$@))), \
                         $(subst $(space),$(space_escape),$(strip $(cmd_$1))))
else
cmd-check = $(if $(strip $(cmd_$@)),,1)
endif

# Replace >$< with >$$< to preserve $ when reloading the .cmd file
# (needed for make)
# Replace >#< with >$(pound)< to avoid starting a comment in the .cmd file
# (needed for make)
# Replace >'< with >'\''< to be able to enclose the whole string in '...'
# (needed for the shell)
make-cmd = $(call escsq,$(subst $(pound),$$(pound),$(subst $$,$$$$,$(cmd_$(1)))))

# Find any prerequisites that are newer than target or that do not exist.
# (This is not true for now; $? should contain any non-existent prerequisites,
# but it does not work as expected when .SECONDARY is present. This seems a bug
# of GNU Make.)
# PHONY targets skipped in both cases.
newer-prereqs = $(filter-out $(PHONY),$?)

# Execute command if command has changed or prerequisite(s) are updated.
if_changed = $(if $(newer-prereqs)$(cmd-check),                              \
	$(cmd);                                                              \
	printf '%s\n' 'cmd_$@ := $(make-cmd)' > $(dot-target).cmd, @:)

# Execute the command and also postprocess generated .d dependencies file.
if_changed_dep = $(if $(newer-prereqs)$(cmd-check),$(cmd_and_fixdep),@:)

cmd_and_fixdep =                                                             \
	$(cmd);                                                              \
	scripts/basic/fixdep $(depfile) $@ '$(make-cmd)' > $(dot-target).cmd;\
	rm -f $(depfile)

# Usage: $(call if_changed_rule,foo)
# Will check if $(cmd_foo) or any of the prerequisites changed,
# and if so will execute $(rule_foo).
if_changed_rule = $(if $(newer-prereqs)$(cmd-check),$(rule_$(1)),@:)

###
# why - tell why a target got built
#       enabled by make V=2
#       Output (listed in the order they are checked):
#          (1) - due to target is PHONY
#          (2) - due to target missing
#          (3) - due to: file1.h file2.h
#          (4) - due to command line change
#          (5) - due to missing .cmd file
#          (6) - due to target not in $(targets)
# (1) PHONY targets are always build
# (2) No target, so we better build it
# (3) Prerequisite is newer than target
# (4) The command line stored in the file named dir/.target.cmd
#     differed from actual command line. This happens when compiler
#     options changes
# (5) No dir/.target.cmd file (used to store command line)
# (6) No dir/.target.cmd file and target not listed in $(targets)
#     This is a good hint that there is a bug in the kbuild file
ifeq ($(KBUILD_VERBOSE),2)
why =                                                                        \
    $(if $(filter $@, $(PHONY)),- due to target is PHONY,                    \
        $(if $(wildcard $@),                                                 \
            $(if $(newer-prereqs),- due to: $(newer-prereqs),                \
                $(if $(cmd-check),                                           \
                    $(if $(cmd_$@),- due to command line change,             \
                        $(if $(filter $@, $(targets)),                       \
                            - due to missing .cmd file,                      \
                            - due to $(notdir $@) not in $$(targets)         \
                         )                                                   \
                     )                                                       \
                 )                                                           \
             ),                                                              \
             - due to target missing                                         \
         )                                                                   \
     )

echo-why = $(call escsq, $(strip $(why)))
endif

###############################################################################
#
# When a Kconfig string contains a filename, it is suitable for
# passing to shell commands. It is surrounded by double-quotes, and
# any double-quotes or backslashes within it are escaped by
# backslashes.
#
# This is no use for dependencies or $(wildcard). We need to strip the
# surrounding quotes and the escaping from quotes and backslashes, and
# we *do* need to escape any spaces in the string. So, for example:
#
# Usage: $(eval $(call config_filename,FOO))
#
# Defines FOO_FILENAME based on the contents of the CONFIG_FOO option,
# transformed as described above to be suitable for use within the
# makefile.
#
# Also, if the filename is a relative filename and exists in the source
# tree but not the build tree, define FOO_SRCPREFIX as $(srctree)/ to
# be prefixed to *both* command invocation and dependencies.
#
# Note: We also print the filenames in the quiet_cmd_foo text, and
# perhaps ought to have a version specially escaped for that purpose.
# But it's only cosmetic, and $(patsubst "%",%,$(CONFIG_FOO)) is good
# enough.  It'll strip the quotes in the common case where there's no
# space and it's a simple filename, and it'll retain the quotes when
# there's a space. There are some esoteric cases in which it'll print
# the wrong thing, but we don't really care. The actual dependencies
# and commands *do* get it right, with various combinations of single
# and double quotes, backslashes and spaces in the filenames.
#
###############################################################################
#
define config_filename
ifneq ($$(CONFIG_$(1)),"")
$(1)_FILENAME := $$(subst \\,\,$$(subst \$$(quote),$$(quote),$$(subst $$(space_escape),\$$(space),$$(patsubst "%",%,$$(subst $$(space),$$(space_escape),$$(CONFIG_$(1)))))))
ifneq ($$(patsubst /%,%,$$(firstword $$($(1)_FILENAME))),$$(firstword $$($(1)_FILENAME)))
else
ifeq ($$(wildcard $$($(1)_FILENAME)),)
ifneq ($$(wildcard $$(srctree)/$$($(1)_FILENAME)),)
$(1)_SRCPREFIX := $(srctree)/
endif
endif
endif
endif
endef
#
###############################################################################

# delete partially updated (i.e. corrupted) files on error
.DELETE_ON_ERROR:

# do not delete intermediate files automatically
.SECONDARY:
Commit	Line	Data
96ac6d43	1	# SPDX-License-Identifier: GPL-2.0
8ec4b4ff SR	2	####
	3	# kbuild: Generic definitions
	4
beda9f3a	5	# Convenient variables
8ec4b4ff	6	comma := ,
13338935	7	quote := "
d51bfb78	8	squote := '
8ec4b4ff SR	9	empty :=
8ec4b4ff SR	10	space := $(empty) $(empty)
9c8fa9bc	11	space_escape := _-_SPACE_-_
9564a8cf	12	pound := \#
8ec4b4ff	13
48f1f058 SR	14	###
	15	# Name of target with a '.' as filename prefix. foo/bar.o => foo/.bar.o
	16	dot-target = $(dir $@).$(notdir $@)
	17
8ec4b4ff	18	###
30a77297	19	# The temporary file to save gcc -MMD generated dependencies must not
8ec4b4ff	20	# contain a comma
48f1f058	21	depfile = $(subst $(comma),_,$(dot-target).d)
8ec4b4ff	22
5e8d780d SR	23	###
	24	# filename of target with directory and extension stripped
	25	basetarget = $(basename $(notdir $@))
	26
afa974b7 MY	27	###
	28	# real prerequisites without phony targets
	29	real-prereqs = $(filter-out $(PHONY), $^)
	30
d51bfb78 SR	31	###
	32	# Escape single quote for use in echo statements
	33	escsq = $(subst $(squote),'\$(squote)',$1)
	34
7e826c44 MY	35	###
	36	# Quote a string to pass it to C files. foo => '"foo"'
	37	stringify = $(squote)$(quote)$1$(quote)$(squote)
	38
5410ecc0 MF	39	###
	40	# Easy method for doing a status message
	41	kecho := :
	42	quiet_kecho := echo
	43	silent_kecho := :
	44	kecho := $($(quiet)kecho)
	45
8ec4b4ff SR	46	###
	47	# filechk is used to check if the content of a generated file is updated.
	48	# Sample usage:
ba97df45 MY	49	#
	50	# filechk_sample = echo $(KERNELRELEASE)
	51	# version.h: FORCE
8ec4b4ff	52	# $(call filechk,sample)
ba97df45	53	#
8ec4b4ff SR	54	# The rule defined shall write to stdout the content of the new file.
	55	# The existing file will be compared with the new one.
	56	# - If no file exist it is created
	57	# - If the content differ the new file is used
	58	# - If they are equal no change, and no timestamp update
	59	# - stdin is piped in from the first prerequisite ($<) so one has
	60	# to specify a valid file as first prerequisite (often the kbuild file)
	61	define filechk
88fe89a4 MY	62	$(Q)set -e; \
	63	mkdir -p $(dir $@); \
	64	trap "rm -f $(dot-target).tmp" EXIT; \
	65	{ $(filechk_$(1)); } > $(dot-target).tmp; \
	66	if [ ! -r $@ ] \|\| ! cmp -s $@ $(dot-target).tmp; then \
	67	$(kecho) ' UPD $@'; \
	68	mv -f $(dot-target).tmp $@; \
8ec4b4ff SR	69	fi
	70	endef
	71
20a468b5	72	######
9d6e7a70	73	# gcc support functions
cd238eff	74	# See documentation in Documentation/kbuild/makefiles.rst
20a468b5	75
910b4046 SR	76	# cc-cross-prefix
910b4046 SR	77	# Usage: CROSS_COMPILE := $(call cc-cross-prefix, m68k-linux-gnu- m68k-linux-)
bd55f96f MY	78	# Return first <prefix> where a <prefix>gcc is found in PATH.
bd55f96f MY	79	# If no gcc found in PATH with listed prefixes return nothing
913ab978 MY	80	#
	81	# Note: '2>/dev/null' is here to force Make to invoke a shell. Otherwise, it
	82	# would try to directly execute the shell builtin 'command'. This workaround
	83	# should be kept for a long time since this issue was fixed only after the
	84	# GNU Make 4.2.1 release.
d4a74bbf MY	85	cc-cross-prefix = $(firstword $(foreach c, $(1), \
d4a74bbf MY	86	$(if $(shell command -v -- $(c)gcc 2>/dev/null), $(c))))
910b4046	87
beda9f3a RZ	88	# output directory for tests below
	89	TMPOUT := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/)
	90
	91	# try-run
	92	# Usage: option = $(call try-run, $(CC)...-o "$$TMP",option-ok,otherwise)
312a3d09 C	93	# Exit code chooses option. "$$TMP" serves as a temporary file and is
312a3d09 C	94	# automatically cleaned up.
e08d6de4	95	try-run = $(shell set -e; \
beda9f3a	96	TMP="$(TMPOUT).$$$$.tmp"; \
691ef3e7	97	TMPO="$(TMPOUT).$$$$.o"; \
beda9f3a RZ	98	if ($(1)) >/dev/null 2>&1; \
	99	then echo "$(2)"; \
	100	else echo "$(3)"; \
	101	fi; \
e08d6de4	102	rm -f "$$TMP" "$$TMPO")
347a00fb	103
20a468b5	104	# as-option
bff288c1	105	# Usage: cflags-y += $(call as-option,-Wa$(comma)-isa=foo,)
beda9f3a	106
e08d6de4	107	as-option = $(call try-run,\
b1e0d8b7	108	$(CC) $(KBUILD_CFLAGS) $(1) -c -x assembler /dev/null -o "$$TMP",$(1),$(2))
20a468b5	109
e2414910	110	# as-instr
bff288c1	111	# Usage: cflags-y += $(call as-instr,instr,option1,option2)
beda9f3a	112
e08d6de4	113	as-instr = $(call try-run,\
b1e0d8b7	114	printf "%b\n" "$(1)" \| $(CC) $(KBUILD_AFLAGS) -c -x assembler -o "$$TMP" -,$(2),$(3))
e2414910	115
9f3f1fd2 MK	116	# __cc-option
9f3f1fd2 MK	117	# Usage: MY_CFLAGS += $(call __cc-option,$(CC),$(MY_CFLAGS),-march=winchip-c6,-march=i586)
e08d6de4	118	__cc-option = $(call try-run,\
9f3f1fd2 MK	119	$(1) -Werror $(2) $(3) -c -x c /dev/null -o "$$TMP",$(3),$(4))
9f3f1fd2 MK	120
d26e9414 ER	121	# Do not attempt to build with gcc plugins during cc-option tests.
d26e9414 ER	122	# (And this uses delayed resolution so the flags will be up to date.)
6ac38934	123	CC_OPTION_CFLAGS = $(filter-out $(GCC_PLUGINS_CFLAGS),$(KBUILD_CFLAGS))
d26e9414	124
20a468b5	125	# cc-option
bff288c1	126	# Usage: cflags-y += $(call cc-option,-march=winchip-c6,-march=i586)
beda9f3a	127
9f3f1fd2 MK	128	cc-option = $(call __cc-option, $(CC),\
	129	$(KBUILD_CPPFLAGS) $(CC_OPTION_CFLAGS),$(1),$(2))
	130
20a468b5	131	# cc-option-yn
bff288c1	132	# Usage: flag := $(call cc-option-yn,-march=winchip-c6)
e08d6de4	133	cc-option-yn = $(call try-run,\
c3f0d0bc	134	$(CC) -Werror $(KBUILD_CPPFLAGS) $(CC_OPTION_CFLAGS) $(1) -c -x c /dev/null -o "$$TMP",y,n)
20a468b5	135
8417da6f MM	136	# cc-disable-warning
8417da6f MM	137	# Usage: cflags-y += $(call cc-disable-warning,unused-but-set-variable)
e08d6de4	138	cc-disable-warning = $(call try-run,\
c3f0d0bc	139	$(CC) -Werror $(KBUILD_CPPFLAGS) $(CC_OPTION_CFLAGS) -W$(strip $(1)) -c -x c /dev/null -o "$$TMP",-Wno-$(strip $(1)))
8417da6f	140
20a468b5 SR	141	# cc-ifversion
20a468b5 SR	142	# Usage: EXTRA_CFLAGS += $(call cc-ifversion, -lt, 0402, -O1)
d3a918c6	143	cc-ifversion = $(shell [ $(CONFIG_GCC_VERSION)0 $(1) $(2)000 ] && echo $(3) \|\| echo $(4))
20a468b5	144
691ef3e7	145	# ld-option
d503ac53 MY	146	# Usage: KBUILD_LDFLAGS += $(call ld-option, -X, -Y)
d503ac53 MY	147	ld-option = $(call try-run, $(LD) $(KBUILD_LDFLAGS) $(1) -v,$(1),$(2),$(3))
691ef3e7	148
ccbef167	149	# ld-version
ccbef167	150	# Note this is mainly for HJ Lu's 3 number binutil versions
e08d6de4	151	ld-version = $(shell $(LD) --version \| $(srctree)/scripts/ld-version.sh)
ccbef167 AK	152
	153	# ld-ifversion
	154	# Usage: $(call ld-ifversion, -ge, 22252, y)
6dcb4e5e	155	ld-ifversion = $(shell [ $(ld-version) $(1) $(2) ] && echo $(3) \|\| echo $(4))
ccbef167	156
5de043f4	157	######
0b0bf7a3	158
beda9f3a	159	###
8ec4b4ff SR	160	# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.build obj=
	161	# Usage:
	162	# $(Q)$(MAKE) $(build)=dir
5b2389b4	163	build := -f $(srctree)/scripts/Makefile.build obj
8ec4b4ff	164
9fb5e537 RR	165	###
	166	# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.dtbinst obj=
	167	# Usage:
	168	# $(Q)$(MAKE) $(dtbinst)=dir
487c7c77	169	dtbinst := -f $(srctree)/scripts/Makefile.dtbinst obj
9fb5e537	170
371fdc77 MY	171	###
	172	# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=
	173	# Usage:
	174	# $(Q)$(MAKE) $(clean)=dir
	175	clean := -f $(srctree)/scripts/Makefile.clean obj
	176
5de043f4 OV	177	# echo command.
5de043f4 OV	178	# Short version is used, if $(quiet) equals `quiet_', otherwise full one.
bff288c1	179	echo-cmd = $(if $($(quiet)cmd_$(1)),\
5de043f4 OV	180	echo ' $(call escsq,$($(quiet)cmd_$(1)))$(echo-why)';)
	181
	182	# printing commands
3a2429e1	183	cmd = @set -e; $(echo-cmd) $(cmd_$(1))
8ec4b4ff SR	184
8ec4b4ff SR	185	###
5de043f4	186	# if_changed - execute command if any prerequisite is newer than
8ec4b4ff SR	187	# target, or command line has changed
	188	# if_changed_dep - as if_changed, but uses fixdep to reveal dependencies
	189	# including used config symbols
	190	# if_changed_rule - as if_changed but execute rule instead
cd238eff	191	# See Documentation/kbuild/makefiles.rst for more info
8ec4b4ff SR	192
8ec4b4ff SR	193	ifneq ($(KBUILD_NOCMDDEP),1)
50bcca6a	194	# Check if both commands are the same including their order. Result is empty
9c8fa9bc	195	# string if equal. User may override this check using make KBUILD_NOCMDDEP=1
50bcca6a	196	cmd-check = $(filter-out $(subst $(space),$(space_escape),$(strip $(cmd_$@))), \
9c8fa9bc	197	$(subst $(space),$(space_escape),$(strip $(cmd_$1))))
c4d5ee13	198	else
50bcca6a	199	cmd-check = $(if $(strip $(cmd_$@)),,1)
8ec4b4ff SR	200	endif
8ec4b4ff SR	201
164f0d2e MM	202	# Replace >$< with >$$< to preserve $ when reloading the .cmd file
164f0d2e MM	203	# (needed for make)
9564a8cf	204	# Replace >#< with >$(pound)< to avoid starting a comment in the .cmd file
164f0d2e MM	205	# (needed for make)
	206	# Replace >'< with >'\''< to be able to enclose the whole string in '...'
	207	# (needed for the shell)
9564a8cf	208	make-cmd = $(call escsq,$(subst $(pound),$$(pound),$(subst $$,$$$$,$(cmd_$(1)))))
6176aa9a	209
2d3b1b8f MY	210	# Find any prerequisites that are newer than target or that do not exist.
	211	# (This is not true for now; $? should contain any non-existent prerequisites,
	212	# but it does not work as expected when .SECONDARY is present. This seems a bug
	213	# of GNU Make.)
48f1f058	214	# PHONY targets skipped in both cases.
eba19032	215	newer-prereqs = $(filter-out $(PHONY),$?)
48f1f058	216
5de043f4	217	# Execute command if command has changed or prerequisite(s) are updated.
eba19032	218	if_changed = $(if $(newer-prereqs)$(cmd-check), \
67126965	219	$(cmd); \
2aedcd09	220	printf '%s\n' 'cmd_$@ := $(make-cmd)' > $(dot-target).cmd, @:)
8ec4b4ff	221
5de043f4	222	# Execute the command and also postprocess generated .d dependencies file.
eba19032	223	if_changed_dep = $(if $(newer-prereqs)$(cmd-check),$(cmd_and_fixdep),@:)
c1a95fda	224
e4aca459	225	cmd_and_fixdep = \
3a2429e1	226	$(cmd); \
392885ee	227	scripts/basic/fixdep $(depfile) $@ '$(make-cmd)' > $(dot-target).cmd;\
e5d28910	228	rm -f $(depfile)
c1a95fda	229
8ec4b4ff	230	# Usage: $(call if_changed_rule,foo)
beda9f3a RZ	231	# Will check if $(cmd_foo) or any of the prerequisites changed,
beda9f3a RZ	232	# and if so will execute $(rule_foo).
eba19032	233	if_changed_rule = $(if $(newer-prereqs)$(cmd-check),$(rule_$(1)),@:)
48f1f058	234
45d506bd	235	###
312a3d09	236	# why - tell why a target got built
45d506bd SR	237	# enabled by make V=2
	238	# Output (listed in the order they are checked):
	239	# (1) - due to target is PHONY
	240	# (2) - due to target missing
	241	# (3) - due to: file1.h file2.h
	242	# (4) - due to command line change
	243	# (5) - due to missing .cmd file
	244	# (6) - due to target not in $(targets)
	245	# (1) PHONY targets are always build
	246	# (2) No target, so we better build it
	247	# (3) Prerequisite is newer than target
	248	# (4) The command line stored in the file named dir/.target.cmd
	249	# differed from actual command line. This happens when compiler
	250	# options changes
	251	# (5) No dir/.target.cmd file (used to store command line)
	252	# (6) No dir/.target.cmd file and target not listed in $(targets)
	253	# This is a good hint that there is a bug in the kbuild file
	254	ifeq ($(KBUILD_VERBOSE),2)
	255	why = \
	256	$(if $(filter $@, $(PHONY)),- due to target is PHONY, \
	257	$(if $(wildcard $@), \
eba19032	258	$(if $(newer-prereqs),- due to: $(newer-prereqs), \
50bcca6a	259	$(if $(cmd-check), \
45d506bd SR	260	$(if $(cmd_$@),- due to command line change, \
	261	$(if $(filter $@, $(targets)), \
	262	- due to missing .cmd file, \
	263	- due to $(notdir $@) not in $$(targets) \
	264	) \
	265	) \
	266	) \
	267	), \
	268	- due to target missing \
	269	) \
	270	)
	271
	272	echo-why = $(call escsq, $(strip $(why)))
	273	endif
3ee550f1 DW	274
	275	###############################################################################
	276	#
	277	# When a Kconfig string contains a filename, it is suitable for
	278	# passing to shell commands. It is surrounded by double-quotes, and
	279	# any double-quotes or backslashes within it are escaped by
	280	# backslashes.
	281	#
	282	# This is no use for dependencies or $(wildcard). We need to strip the
	283	# surrounding quotes and the escaping from quotes and backslashes, and
	284	# we do need to escape any spaces in the string. So, for example:
	285	#
	286	# Usage: $(eval $(call config_filename,FOO))
	287	#
	288	# Defines FOO_FILENAME based on the contents of the CONFIG_FOO option,
	289	# transformed as described above to be suitable for use within the
	290	# makefile.
	291	#
	292	# Also, if the filename is a relative filename and exists in the source
	293	# tree but not the build tree, define FOO_SRCPREFIX as $(srctree)/ to
	294	# be prefixed to both command invocation and dependencies.
	295	#
	296	# Note: We also print the filenames in the quiet_cmd_foo text, and
	297	# perhaps ought to have a version specially escaped for that purpose.
	298	# But it's only cosmetic, and $(patsubst "%",%,$(CONFIG_FOO)) is good
	299	# enough. It'll strip the quotes in the common case where there's no
	300	# space and it's a simple filename, and it'll retain the quotes when
	301	# there's a space. There are some esoteric cases in which it'll print
	302	# the wrong thing, but we don't really care. The actual dependencies
	303	# and commands do get it right, with various combinations of single
	304	# and double quotes, backslashes and spaces in the filenames.
	305	#
	306	###############################################################################
	307	#
3ee550f1 DW	308	define config_filename
	309	ifneq ($$(CONFIG_$(1)),"")
	310	$(1)_FILENAME := $$(subst \\,\,$$(subst \$$(quote),$$(quote),$$(subst $$(space_escape),\$$(space),$$(patsubst "%",%,$$(subst $$(space),$$(space_escape),$$(CONFIG_$(1)))))))
	311	ifneq ($$(patsubst /%,%,$$(firstword $$($(1)_FILENAME))),$$(firstword $$($(1)_FILENAME)))
	312	else
	313	ifeq ($$(wildcard $$($(1)_FILENAME)),)
	314	ifneq ($$(wildcard $$(srctree)/$$($(1)_FILENAME)),)
	315	$(1)_SRCPREFIX := $(srctree)/
	316	endif
	317	endif
	318	endif
	319	endif
	320	endef
	321	#
	322	###############################################################################
9c2af1c7 MY	323
	324	# delete partially updated (i.e. corrupted) files on error
	325	.DELETE_ON_ERROR:
8e9b61b2 MY	326
	327	# do not delete intermediate files automatically
	328	.SECONDARY: