]>
Commit | Line | Data |
---|---|---|
175859bf DD |
1 | /* |
2 | * Driver for SiS7019 Audio Accelerator | |
3 | * | |
4 | * Copyright (C) 2004-2007, David Dillow | |
5 | * Written by David Dillow <dave@thedillows.org> | |
6 | * Inspired by the Trident 4D-WaveDX/NX driver. | |
7 | * | |
8 | * All rights reserved. | |
9 | * | |
10 | * This program is free software; you can redistribute it and/or modify | |
11 | * it under the terms of the GNU General Public License as published by | |
12 | * the Free Software Foundation, version 2. | |
13 | * | |
14 | * This program is distributed in the hope that it will be useful, | |
15 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
16 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
17 | * GNU General Public License for more details. | |
18 | * | |
19 | * You should have received a copy of the GNU General Public License | |
20 | * along with this program; if not, write to the Free Software | |
21 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
22 | */ | |
23 | ||
175859bf DD |
24 | #include <linux/init.h> |
25 | #include <linux/pci.h> | |
26 | #include <linux/time.h> | |
5a0e3ad6 | 27 | #include <linux/slab.h> |
175859bf DD |
28 | #include <linux/moduleparam.h> |
29 | #include <linux/interrupt.h> | |
30 | #include <linux/delay.h> | |
31 | #include <sound/core.h> | |
32 | #include <sound/ac97_codec.h> | |
33 | #include <sound/initval.h> | |
34 | #include "sis7019.h" | |
35 | ||
36 | MODULE_AUTHOR("David Dillow <dave@thedillows.org>"); | |
37 | MODULE_DESCRIPTION("SiS7019"); | |
38 | MODULE_LICENSE("GPL"); | |
39 | MODULE_SUPPORTED_DEVICE("{{SiS,SiS7019 Audio Accelerator}}"); | |
40 | ||
41 | static int index = SNDRV_DEFAULT_IDX1; /* Index 0-MAX */ | |
42 | static char *id = SNDRV_DEFAULT_STR1; /* ID for this card */ | |
43 | static int enable = 1; | |
44 | ||
45 | module_param(index, int, 0444); | |
46 | MODULE_PARM_DESC(index, "Index value for SiS7019 Audio Accelerator."); | |
47 | module_param(id, charp, 0444); | |
48 | MODULE_PARM_DESC(id, "ID string for SiS7019 Audio Accelerator."); | |
49 | module_param(enable, bool, 0444); | |
50 | MODULE_PARM_DESC(enable, "Enable SiS7019 Audio Accelerator."); | |
51 | ||
cebe41d4 | 52 | static DEFINE_PCI_DEVICE_TABLE(snd_sis7019_ids) = { |
175859bf DD |
53 | { PCI_DEVICE(PCI_VENDOR_ID_SI, 0x7019) }, |
54 | { 0, } | |
55 | }; | |
56 | ||
57 | MODULE_DEVICE_TABLE(pci, snd_sis7019_ids); | |
58 | ||
59 | /* There are three timing modes for the voices. | |
60 | * | |
61 | * For both playback and capture, when the buffer is one or two periods long, | |
62 | * we use the hardware's built-in Mid-Loop Interrupt and End-Loop Interrupt | |
63 | * to let us know when the periods have ended. | |
64 | * | |
65 | * When performing playback with more than two periods per buffer, we set | |
66 | * the "Stop Sample Offset" and tell the hardware to interrupt us when we | |
67 | * reach it. We then update the offset and continue on until we are | |
68 | * interrupted for the next period. | |
69 | * | |
70 | * Capture channels do not have a SSO, so we allocate a playback channel to | |
71 | * use as a timer for the capture periods. We use the SSO on the playback | |
72 | * channel to clock out virtual periods, and adjust the virtual period length | |
73 | * to maintain synchronization. This algorithm came from the Trident driver. | |
74 | * | |
75 | * FIXME: It'd be nice to make use of some of the synth features in the | |
76 | * hardware, but a woeful lack of documentation is a significant roadblock. | |
77 | */ | |
78 | struct voice { | |
79 | u16 flags; | |
80 | #define VOICE_IN_USE 1 | |
81 | #define VOICE_CAPTURE 2 | |
82 | #define VOICE_SSO_TIMING 4 | |
83 | #define VOICE_SYNC_TIMING 8 | |
84 | u16 sync_cso; | |
85 | u16 period_size; | |
86 | u16 buffer_size; | |
87 | u16 sync_period_size; | |
88 | u16 sync_buffer_size; | |
89 | u32 sso; | |
90 | u32 vperiod; | |
91 | struct snd_pcm_substream *substream; | |
92 | struct voice *timing; | |
93 | void __iomem *ctrl_base; | |
94 | void __iomem *wave_base; | |
95 | void __iomem *sync_base; | |
96 | int num; | |
97 | }; | |
98 | ||
99 | /* We need four pages to store our wave parameters during a suspend. If | |
100 | * we're not doing power management, we still need to allocate a page | |
101 | * for the silence buffer. | |
102 | */ | |
103 | #ifdef CONFIG_PM | |
104 | #define SIS_SUSPEND_PAGES 4 | |
105 | #else | |
106 | #define SIS_SUSPEND_PAGES 1 | |
107 | #endif | |
108 | ||
109 | struct sis7019 { | |
110 | unsigned long ioport; | |
111 | void __iomem *ioaddr; | |
112 | int irq; | |
113 | int codecs_present; | |
114 | ||
115 | struct pci_dev *pci; | |
116 | struct snd_pcm *pcm; | |
117 | struct snd_card *card; | |
118 | struct snd_ac97 *ac97[3]; | |
119 | ||
120 | /* Protect against more than one thread hitting the AC97 | |
121 | * registers (in a more polite manner than pounding the hardware | |
122 | * semaphore) | |
123 | */ | |
124 | struct mutex ac97_mutex; | |
125 | ||
126 | /* voice_lock protects allocation/freeing of the voice descriptions | |
127 | */ | |
128 | spinlock_t voice_lock; | |
129 | ||
130 | struct voice voices[64]; | |
131 | struct voice capture_voice; | |
132 | ||
133 | /* Allocate pages to store the internal wave state during | |
134 | * suspends. When we're operating, this can be used as a silence | |
135 | * buffer for a timing channel. | |
136 | */ | |
137 | void *suspend_state[SIS_SUSPEND_PAGES]; | |
138 | ||
139 | int silence_users; | |
140 | dma_addr_t silence_dma_addr; | |
141 | }; | |
142 | ||
143 | #define SIS_PRIMARY_CODEC_PRESENT 0x0001 | |
144 | #define SIS_SECONDARY_CODEC_PRESENT 0x0002 | |
145 | #define SIS_TERTIARY_CODEC_PRESENT 0x0004 | |
146 | ||
147 | /* The HW offset parameters (Loop End, Stop Sample, End Sample) have a | |
148 | * documented range of 8-0xfff8 samples. Given that they are 0-based, | |
149 | * that places our period/buffer range at 9-0xfff9 samples. That makes the | |
150 | * max buffer size 0xfff9 samples * 2 channels * 2 bytes per sample, and | |
151 | * max samples / min samples gives us the max periods in a buffer. | |
152 | * | |
153 | * We'll add a constraint upon open that limits the period and buffer sample | |
154 | * size to values that are legal for the hardware. | |
155 | */ | |
156 | static struct snd_pcm_hardware sis_playback_hw_info = { | |
157 | .info = (SNDRV_PCM_INFO_MMAP | | |
158 | SNDRV_PCM_INFO_MMAP_VALID | | |
159 | SNDRV_PCM_INFO_INTERLEAVED | | |
160 | SNDRV_PCM_INFO_BLOCK_TRANSFER | | |
161 | SNDRV_PCM_INFO_SYNC_START | | |
162 | SNDRV_PCM_INFO_RESUME), | |
163 | .formats = (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_U8 | | |
164 | SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_U16_LE), | |
165 | .rates = SNDRV_PCM_RATE_8000_48000 | SNDRV_PCM_RATE_CONTINUOUS, | |
166 | .rate_min = 4000, | |
167 | .rate_max = 48000, | |
168 | .channels_min = 1, | |
169 | .channels_max = 2, | |
170 | .buffer_bytes_max = (0xfff9 * 4), | |
171 | .period_bytes_min = 9, | |
172 | .period_bytes_max = (0xfff9 * 4), | |
173 | .periods_min = 1, | |
174 | .periods_max = (0xfff9 / 9), | |
175 | }; | |
176 | ||
177 | static struct snd_pcm_hardware sis_capture_hw_info = { | |
178 | .info = (SNDRV_PCM_INFO_MMAP | | |
179 | SNDRV_PCM_INFO_MMAP_VALID | | |
180 | SNDRV_PCM_INFO_INTERLEAVED | | |
181 | SNDRV_PCM_INFO_BLOCK_TRANSFER | | |
182 | SNDRV_PCM_INFO_SYNC_START | | |
183 | SNDRV_PCM_INFO_RESUME), | |
184 | .formats = (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_U8 | | |
185 | SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_U16_LE), | |
186 | .rates = SNDRV_PCM_RATE_48000, | |
187 | .rate_min = 4000, | |
188 | .rate_max = 48000, | |
189 | .channels_min = 1, | |
190 | .channels_max = 2, | |
191 | .buffer_bytes_max = (0xfff9 * 4), | |
192 | .period_bytes_min = 9, | |
193 | .period_bytes_max = (0xfff9 * 4), | |
194 | .periods_min = 1, | |
195 | .periods_max = (0xfff9 / 9), | |
196 | }; | |
197 | ||
198 | static void sis_update_sso(struct voice *voice, u16 period) | |
199 | { | |
200 | void __iomem *base = voice->ctrl_base; | |
201 | ||
202 | voice->sso += period; | |
203 | if (voice->sso >= voice->buffer_size) | |
204 | voice->sso -= voice->buffer_size; | |
205 | ||
206 | /* Enforce the documented hardware minimum offset */ | |
207 | if (voice->sso < 8) | |
208 | voice->sso = 8; | |
209 | ||
210 | /* The SSO is in the upper 16 bits of the register. */ | |
211 | writew(voice->sso & 0xffff, base + SIS_PLAY_DMA_SSO_ESO + 2); | |
212 | } | |
213 | ||
214 | static void sis_update_voice(struct voice *voice) | |
215 | { | |
216 | if (voice->flags & VOICE_SSO_TIMING) { | |
217 | sis_update_sso(voice, voice->period_size); | |
218 | } else if (voice->flags & VOICE_SYNC_TIMING) { | |
219 | int sync; | |
220 | ||
221 | /* If we've not hit the end of the virtual period, update | |
222 | * our records and keep going. | |
223 | */ | |
224 | if (voice->vperiod > voice->period_size) { | |
225 | voice->vperiod -= voice->period_size; | |
226 | if (voice->vperiod < voice->period_size) | |
227 | sis_update_sso(voice, voice->vperiod); | |
228 | else | |
229 | sis_update_sso(voice, voice->period_size); | |
230 | return; | |
231 | } | |
232 | ||
233 | /* Calculate our relative offset between the target and | |
234 | * the actual CSO value. Since we're operating in a loop, | |
235 | * if the value is more than half way around, we can | |
236 | * consider ourselves wrapped. | |
237 | */ | |
238 | sync = voice->sync_cso; | |
239 | sync -= readw(voice->sync_base + SIS_CAPTURE_DMA_FORMAT_CSO); | |
240 | if (sync > (voice->sync_buffer_size / 2)) | |
241 | sync -= voice->sync_buffer_size; | |
242 | ||
243 | /* If sync is positive, then we interrupted too early, and | |
244 | * we'll need to come back in a few samples and try again. | |
245 | * There's a minimum wait, as it takes some time for the DMA | |
246 | * engine to startup, etc... | |
247 | */ | |
248 | if (sync > 0) { | |
249 | if (sync < 16) | |
250 | sync = 16; | |
251 | sis_update_sso(voice, sync); | |
252 | return; | |
253 | } | |
254 | ||
255 | /* Ok, we interrupted right on time, or (hopefully) just | |
256 | * a bit late. We'll adjst our next waiting period based | |
257 | * on how close we got. | |
258 | * | |
259 | * We need to stay just behind the actual channel to ensure | |
260 | * it really is past a period when we get our interrupt -- | |
261 | * otherwise we'll fall into the early code above and have | |
262 | * a minimum wait time, which makes us quite late here, | |
263 | * eating into the user's time to refresh the buffer, esp. | |
264 | * if using small periods. | |
265 | * | |
266 | * If we're less than 9 samples behind, we're on target. | |
267 | */ | |
268 | if (sync > -9) | |
269 | voice->vperiod = voice->sync_period_size + 1; | |
270 | else | |
271 | voice->vperiod = voice->sync_period_size - 4; | |
272 | ||
273 | if (voice->vperiod < voice->buffer_size) { | |
274 | sis_update_sso(voice, voice->vperiod); | |
275 | voice->vperiod = 0; | |
276 | } else | |
277 | sis_update_sso(voice, voice->period_size); | |
278 | ||
279 | sync = voice->sync_cso + voice->sync_period_size; | |
280 | if (sync >= voice->sync_buffer_size) | |
281 | sync -= voice->sync_buffer_size; | |
282 | voice->sync_cso = sync; | |
283 | } | |
284 | ||
285 | snd_pcm_period_elapsed(voice->substream); | |
286 | } | |
287 | ||
288 | static void sis_voice_irq(u32 status, struct voice *voice) | |
289 | { | |
290 | int bit; | |
291 | ||
292 | while (status) { | |
293 | bit = __ffs(status); | |
294 | status >>= bit + 1; | |
295 | voice += bit; | |
296 | sis_update_voice(voice); | |
297 | voice++; | |
298 | } | |
299 | } | |
300 | ||
301 | static irqreturn_t sis_interrupt(int irq, void *dev) | |
302 | { | |
303 | struct sis7019 *sis = dev; | |
304 | unsigned long io = sis->ioport; | |
305 | struct voice *voice; | |
306 | u32 intr, status; | |
307 | ||
308 | /* We only use the DMA interrupts, and we don't enable any other | |
309 | * source of interrupts. But, it is possible to see an interupt | |
310 | * status that didn't actually interrupt us, so eliminate anything | |
311 | * we're not expecting to avoid falsely claiming an IRQ, and an | |
312 | * ensuing endless loop. | |
313 | */ | |
314 | intr = inl(io + SIS_GISR); | |
315 | intr &= SIS_GISR_AUDIO_PLAY_DMA_IRQ_STATUS | | |
316 | SIS_GISR_AUDIO_RECORD_DMA_IRQ_STATUS; | |
317 | if (!intr) | |
318 | return IRQ_NONE; | |
319 | ||
320 | do { | |
321 | status = inl(io + SIS_PISR_A); | |
322 | if (status) { | |
323 | sis_voice_irq(status, sis->voices); | |
324 | outl(status, io + SIS_PISR_A); | |
325 | } | |
326 | ||
327 | status = inl(io + SIS_PISR_B); | |
328 | if (status) { | |
329 | sis_voice_irq(status, &sis->voices[32]); | |
330 | outl(status, io + SIS_PISR_B); | |
331 | } | |
332 | ||
333 | status = inl(io + SIS_RISR); | |
334 | if (status) { | |
335 | voice = &sis->capture_voice; | |
336 | if (!voice->timing) | |
337 | snd_pcm_period_elapsed(voice->substream); | |
338 | ||
339 | outl(status, io + SIS_RISR); | |
340 | } | |
341 | ||
342 | outl(intr, io + SIS_GISR); | |
343 | intr = inl(io + SIS_GISR); | |
344 | intr &= SIS_GISR_AUDIO_PLAY_DMA_IRQ_STATUS | | |
345 | SIS_GISR_AUDIO_RECORD_DMA_IRQ_STATUS; | |
346 | } while (intr); | |
347 | ||
348 | return IRQ_HANDLED; | |
349 | } | |
350 | ||
351 | static u32 sis_rate_to_delta(unsigned int rate) | |
352 | { | |
353 | u32 delta; | |
354 | ||
355 | /* This was copied from the trident driver, but it seems its gotten | |
356 | * around a bit... nevertheless, it works well. | |
357 | * | |
358 | * We special case 44100 and 8000 since rounding with the equation | |
359 | * does not give us an accurate enough value. For 11025 and 22050 | |
360 | * the equation gives us the best answer. All other frequencies will | |
361 | * also use the equation. JDW | |
362 | */ | |
363 | if (rate == 44100) | |
364 | delta = 0xeb3; | |
365 | else if (rate == 8000) | |
366 | delta = 0x2ab; | |
367 | else if (rate == 48000) | |
368 | delta = 0x1000; | |
369 | else | |
370 | delta = (((rate << 12) + 24000) / 48000) & 0x0000ffff; | |
371 | return delta; | |
372 | } | |
373 | ||
374 | static void __sis_map_silence(struct sis7019 *sis) | |
375 | { | |
376 | /* Helper function: must hold sis->voice_lock on entry */ | |
377 | if (!sis->silence_users) | |
378 | sis->silence_dma_addr = pci_map_single(sis->pci, | |
379 | sis->suspend_state[0], | |
380 | 4096, PCI_DMA_TODEVICE); | |
381 | sis->silence_users++; | |
382 | } | |
383 | ||
384 | static void __sis_unmap_silence(struct sis7019 *sis) | |
385 | { | |
386 | /* Helper function: must hold sis->voice_lock on entry */ | |
387 | sis->silence_users--; | |
388 | if (!sis->silence_users) | |
389 | pci_unmap_single(sis->pci, sis->silence_dma_addr, 4096, | |
390 | PCI_DMA_TODEVICE); | |
391 | } | |
392 | ||
393 | static void sis_free_voice(struct sis7019 *sis, struct voice *voice) | |
394 | { | |
395 | unsigned long flags; | |
396 | ||
397 | spin_lock_irqsave(&sis->voice_lock, flags); | |
398 | if (voice->timing) { | |
399 | __sis_unmap_silence(sis); | |
400 | voice->timing->flags &= ~(VOICE_IN_USE | VOICE_SSO_TIMING | | |
401 | VOICE_SYNC_TIMING); | |
402 | voice->timing = NULL; | |
403 | } | |
404 | voice->flags &= ~(VOICE_IN_USE | VOICE_SSO_TIMING | VOICE_SYNC_TIMING); | |
405 | spin_unlock_irqrestore(&sis->voice_lock, flags); | |
406 | } | |
407 | ||
408 | static struct voice *__sis_alloc_playback_voice(struct sis7019 *sis) | |
409 | { | |
410 | /* Must hold the voice_lock on entry */ | |
411 | struct voice *voice; | |
412 | int i; | |
413 | ||
414 | for (i = 0; i < 64; i++) { | |
415 | voice = &sis->voices[i]; | |
416 | if (voice->flags & VOICE_IN_USE) | |
417 | continue; | |
418 | voice->flags |= VOICE_IN_USE; | |
419 | goto found_one; | |
420 | } | |
421 | voice = NULL; | |
422 | ||
423 | found_one: | |
424 | return voice; | |
425 | } | |
426 | ||
427 | static struct voice *sis_alloc_playback_voice(struct sis7019 *sis) | |
428 | { | |
429 | struct voice *voice; | |
430 | unsigned long flags; | |
431 | ||
432 | spin_lock_irqsave(&sis->voice_lock, flags); | |
433 | voice = __sis_alloc_playback_voice(sis); | |
434 | spin_unlock_irqrestore(&sis->voice_lock, flags); | |
435 | ||
436 | return voice; | |
437 | } | |
438 | ||
439 | static int sis_alloc_timing_voice(struct snd_pcm_substream *substream, | |
440 | struct snd_pcm_hw_params *hw_params) | |
441 | { | |
442 | struct sis7019 *sis = snd_pcm_substream_chip(substream); | |
443 | struct snd_pcm_runtime *runtime = substream->runtime; | |
444 | struct voice *voice = runtime->private_data; | |
445 | unsigned int period_size, buffer_size; | |
446 | unsigned long flags; | |
447 | int needed; | |
448 | ||
449 | /* If there are one or two periods per buffer, we don't need a | |
450 | * timing voice, as we can use the capture channel's interrupts | |
451 | * to clock out the periods. | |
452 | */ | |
453 | period_size = params_period_size(hw_params); | |
454 | buffer_size = params_buffer_size(hw_params); | |
455 | needed = (period_size != buffer_size && | |
456 | period_size != (buffer_size / 2)); | |
457 | ||
458 | if (needed && !voice->timing) { | |
459 | spin_lock_irqsave(&sis->voice_lock, flags); | |
460 | voice->timing = __sis_alloc_playback_voice(sis); | |
461 | if (voice->timing) | |
462 | __sis_map_silence(sis); | |
463 | spin_unlock_irqrestore(&sis->voice_lock, flags); | |
464 | if (!voice->timing) | |
465 | return -ENOMEM; | |
466 | voice->timing->substream = substream; | |
467 | } else if (!needed && voice->timing) { | |
468 | sis_free_voice(sis, voice); | |
469 | voice->timing = NULL; | |
470 | } | |
471 | ||
472 | return 0; | |
473 | } | |
474 | ||
475 | static int sis_playback_open(struct snd_pcm_substream *substream) | |
476 | { | |
477 | struct sis7019 *sis = snd_pcm_substream_chip(substream); | |
478 | struct snd_pcm_runtime *runtime = substream->runtime; | |
479 | struct voice *voice; | |
480 | ||
481 | voice = sis_alloc_playback_voice(sis); | |
482 | if (!voice) | |
483 | return -EAGAIN; | |
484 | ||
485 | voice->substream = substream; | |
486 | runtime->private_data = voice; | |
487 | runtime->hw = sis_playback_hw_info; | |
488 | snd_pcm_hw_constraint_minmax(runtime, SNDRV_PCM_HW_PARAM_PERIOD_SIZE, | |
489 | 9, 0xfff9); | |
490 | snd_pcm_hw_constraint_minmax(runtime, SNDRV_PCM_HW_PARAM_BUFFER_SIZE, | |
491 | 9, 0xfff9); | |
492 | snd_pcm_set_sync(substream); | |
493 | return 0; | |
494 | } | |
495 | ||
496 | static int sis_substream_close(struct snd_pcm_substream *substream) | |
497 | { | |
498 | struct sis7019 *sis = snd_pcm_substream_chip(substream); | |
499 | struct snd_pcm_runtime *runtime = substream->runtime; | |
500 | struct voice *voice = runtime->private_data; | |
501 | ||
502 | sis_free_voice(sis, voice); | |
503 | return 0; | |
504 | } | |
505 | ||
506 | static int sis_playback_hw_params(struct snd_pcm_substream *substream, | |
507 | struct snd_pcm_hw_params *hw_params) | |
508 | { | |
509 | return snd_pcm_lib_malloc_pages(substream, | |
510 | params_buffer_bytes(hw_params)); | |
511 | } | |
512 | ||
513 | static int sis_hw_free(struct snd_pcm_substream *substream) | |
514 | { | |
515 | return snd_pcm_lib_free_pages(substream); | |
516 | } | |
517 | ||
518 | static int sis_pcm_playback_prepare(struct snd_pcm_substream *substream) | |
519 | { | |
520 | struct snd_pcm_runtime *runtime = substream->runtime; | |
521 | struct voice *voice = runtime->private_data; | |
522 | void __iomem *ctrl_base = voice->ctrl_base; | |
523 | void __iomem *wave_base = voice->wave_base; | |
524 | u32 format, dma_addr, control, sso_eso, delta, reg; | |
525 | u16 leo; | |
526 | ||
527 | /* We rely on the PCM core to ensure that the parameters for this | |
528 | * substream do not change on us while we're programming the HW. | |
529 | */ | |
530 | format = 0; | |
531 | if (snd_pcm_format_width(runtime->format) == 8) | |
532 | format |= SIS_PLAY_DMA_FORMAT_8BIT; | |
533 | if (!snd_pcm_format_signed(runtime->format)) | |
534 | format |= SIS_PLAY_DMA_FORMAT_UNSIGNED; | |
535 | if (runtime->channels == 1) | |
536 | format |= SIS_PLAY_DMA_FORMAT_MONO; | |
537 | ||
538 | /* The baseline setup is for a single period per buffer, and | |
539 | * we add bells and whistles as needed from there. | |
540 | */ | |
541 | dma_addr = runtime->dma_addr; | |
542 | leo = runtime->buffer_size - 1; | |
543 | control = leo | SIS_PLAY_DMA_LOOP | SIS_PLAY_DMA_INTR_AT_LEO; | |
544 | sso_eso = leo; | |
545 | ||
546 | if (runtime->period_size == (runtime->buffer_size / 2)) { | |
547 | control |= SIS_PLAY_DMA_INTR_AT_MLP; | |
548 | } else if (runtime->period_size != runtime->buffer_size) { | |
549 | voice->flags |= VOICE_SSO_TIMING; | |
550 | voice->sso = runtime->period_size - 1; | |
551 | voice->period_size = runtime->period_size; | |
552 | voice->buffer_size = runtime->buffer_size; | |
553 | ||
554 | control &= ~SIS_PLAY_DMA_INTR_AT_LEO; | |
555 | control |= SIS_PLAY_DMA_INTR_AT_SSO; | |
556 | sso_eso |= (runtime->period_size - 1) << 16; | |
557 | } | |
558 | ||
559 | delta = sis_rate_to_delta(runtime->rate); | |
560 | ||
561 | /* Ok, we're ready to go, set up the channel. | |
562 | */ | |
563 | writel(format, ctrl_base + SIS_PLAY_DMA_FORMAT_CSO); | |
564 | writel(dma_addr, ctrl_base + SIS_PLAY_DMA_BASE); | |
565 | writel(control, ctrl_base + SIS_PLAY_DMA_CONTROL); | |
566 | writel(sso_eso, ctrl_base + SIS_PLAY_DMA_SSO_ESO); | |
567 | ||
568 | for (reg = 0; reg < SIS_WAVE_SIZE; reg += 4) | |
569 | writel(0, wave_base + reg); | |
570 | ||
571 | writel(SIS_WAVE_GENERAL_WAVE_VOLUME, wave_base + SIS_WAVE_GENERAL); | |
572 | writel(delta << 16, wave_base + SIS_WAVE_GENERAL_ARTICULATION); | |
573 | writel(SIS_WAVE_CHANNEL_CONTROL_FIRST_SAMPLE | | |
574 | SIS_WAVE_CHANNEL_CONTROL_AMP_ENABLE | | |
575 | SIS_WAVE_CHANNEL_CONTROL_INTERPOLATE_ENABLE, | |
576 | wave_base + SIS_WAVE_CHANNEL_CONTROL); | |
577 | ||
578 | /* Force PCI writes to post. */ | |
579 | readl(ctrl_base); | |
580 | ||
581 | return 0; | |
582 | } | |
583 | ||
584 | static int sis_pcm_trigger(struct snd_pcm_substream *substream, int cmd) | |
585 | { | |
586 | struct sis7019 *sis = snd_pcm_substream_chip(substream); | |
587 | unsigned long io = sis->ioport; | |
588 | struct snd_pcm_substream *s; | |
589 | struct voice *voice; | |
590 | void *chip; | |
591 | int starting; | |
592 | u32 record = 0; | |
593 | u32 play[2] = { 0, 0 }; | |
594 | ||
595 | /* No locks needed, as the PCM core will hold the locks on the | |
596 | * substreams, and the HW will only start/stop the indicated voices | |
597 | * without changing the state of the others. | |
598 | */ | |
599 | switch (cmd) { | |
600 | case SNDRV_PCM_TRIGGER_START: | |
601 | case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: | |
602 | case SNDRV_PCM_TRIGGER_RESUME: | |
603 | starting = 1; | |
604 | break; | |
605 | case SNDRV_PCM_TRIGGER_STOP: | |
606 | case SNDRV_PCM_TRIGGER_PAUSE_PUSH: | |
607 | case SNDRV_PCM_TRIGGER_SUSPEND: | |
608 | starting = 0; | |
609 | break; | |
610 | default: | |
611 | return -EINVAL; | |
612 | } | |
613 | ||
614 | snd_pcm_group_for_each_entry(s, substream) { | |
615 | /* Make sure it is for us... */ | |
616 | chip = snd_pcm_substream_chip(s); | |
617 | if (chip != sis) | |
618 | continue; | |
619 | ||
620 | voice = s->runtime->private_data; | |
621 | if (voice->flags & VOICE_CAPTURE) { | |
622 | record |= 1 << voice->num; | |
623 | voice = voice->timing; | |
624 | } | |
625 | ||
626 | /* voice could be NULL if this a recording stream, and it | |
627 | * doesn't have an external timing channel. | |
628 | */ | |
629 | if (voice) | |
630 | play[voice->num / 32] |= 1 << (voice->num & 0x1f); | |
631 | ||
632 | snd_pcm_trigger_done(s, substream); | |
633 | } | |
634 | ||
635 | if (starting) { | |
636 | if (record) | |
637 | outl(record, io + SIS_RECORD_START_REG); | |
638 | if (play[0]) | |
639 | outl(play[0], io + SIS_PLAY_START_A_REG); | |
640 | if (play[1]) | |
641 | outl(play[1], io + SIS_PLAY_START_B_REG); | |
642 | } else { | |
643 | if (record) | |
644 | outl(record, io + SIS_RECORD_STOP_REG); | |
645 | if (play[0]) | |
646 | outl(play[0], io + SIS_PLAY_STOP_A_REG); | |
647 | if (play[1]) | |
648 | outl(play[1], io + SIS_PLAY_STOP_B_REG); | |
649 | } | |
650 | return 0; | |
651 | } | |
652 | ||
653 | static snd_pcm_uframes_t sis_pcm_pointer(struct snd_pcm_substream *substream) | |
654 | { | |
655 | struct snd_pcm_runtime *runtime = substream->runtime; | |
656 | struct voice *voice = runtime->private_data; | |
657 | u32 cso; | |
658 | ||
659 | cso = readl(voice->ctrl_base + SIS_PLAY_DMA_FORMAT_CSO); | |
660 | cso &= 0xffff; | |
661 | return cso; | |
662 | } | |
663 | ||
664 | static int sis_capture_open(struct snd_pcm_substream *substream) | |
665 | { | |
666 | struct sis7019 *sis = snd_pcm_substream_chip(substream); | |
667 | struct snd_pcm_runtime *runtime = substream->runtime; | |
668 | struct voice *voice = &sis->capture_voice; | |
669 | unsigned long flags; | |
670 | ||
671 | /* FIXME: The driver only supports recording from one channel | |
672 | * at the moment, but it could support more. | |
673 | */ | |
674 | spin_lock_irqsave(&sis->voice_lock, flags); | |
675 | if (voice->flags & VOICE_IN_USE) | |
676 | voice = NULL; | |
677 | else | |
678 | voice->flags |= VOICE_IN_USE; | |
679 | spin_unlock_irqrestore(&sis->voice_lock, flags); | |
680 | ||
681 | if (!voice) | |
682 | return -EAGAIN; | |
683 | ||
684 | voice->substream = substream; | |
685 | runtime->private_data = voice; | |
686 | runtime->hw = sis_capture_hw_info; | |
687 | runtime->hw.rates = sis->ac97[0]->rates[AC97_RATES_ADC]; | |
688 | snd_pcm_limit_hw_rates(runtime); | |
689 | snd_pcm_hw_constraint_minmax(runtime, SNDRV_PCM_HW_PARAM_PERIOD_SIZE, | |
690 | 9, 0xfff9); | |
691 | snd_pcm_hw_constraint_minmax(runtime, SNDRV_PCM_HW_PARAM_BUFFER_SIZE, | |
692 | 9, 0xfff9); | |
693 | snd_pcm_set_sync(substream); | |
694 | return 0; | |
695 | } | |
696 | ||
697 | static int sis_capture_hw_params(struct snd_pcm_substream *substream, | |
698 | struct snd_pcm_hw_params *hw_params) | |
699 | { | |
700 | struct sis7019 *sis = snd_pcm_substream_chip(substream); | |
701 | int rc; | |
702 | ||
703 | rc = snd_ac97_set_rate(sis->ac97[0], AC97_PCM_LR_ADC_RATE, | |
704 | params_rate(hw_params)); | |
705 | if (rc) | |
706 | goto out; | |
707 | ||
708 | rc = snd_pcm_lib_malloc_pages(substream, | |
709 | params_buffer_bytes(hw_params)); | |
710 | if (rc < 0) | |
711 | goto out; | |
712 | ||
713 | rc = sis_alloc_timing_voice(substream, hw_params); | |
714 | ||
715 | out: | |
716 | return rc; | |
717 | } | |
718 | ||
719 | static void sis_prepare_timing_voice(struct voice *voice, | |
720 | struct snd_pcm_substream *substream) | |
721 | { | |
722 | struct sis7019 *sis = snd_pcm_substream_chip(substream); | |
723 | struct snd_pcm_runtime *runtime = substream->runtime; | |
724 | struct voice *timing = voice->timing; | |
725 | void __iomem *play_base = timing->ctrl_base; | |
726 | void __iomem *wave_base = timing->wave_base; | |
727 | u16 buffer_size, period_size; | |
728 | u32 format, control, sso_eso, delta; | |
729 | u32 vperiod, sso, reg; | |
730 | ||
731 | /* Set our initial buffer and period as large as we can given a | |
732 | * single page of silence. | |
733 | */ | |
734 | buffer_size = 4096 / runtime->channels; | |
735 | buffer_size /= snd_pcm_format_size(runtime->format, 1); | |
736 | period_size = buffer_size; | |
737 | ||
738 | /* Initially, we want to interrupt just a bit behind the end of | |
739 | * the period we're clocking out. 10 samples seems to give a good | |
740 | * delay. | |
741 | * | |
742 | * We want to spread our interrupts throughout the virtual period, | |
743 | * so that we don't end up with two interrupts back to back at the | |
744 | * end -- this helps minimize the effects of any jitter. Adjust our | |
745 | * clocking period size so that the last period is at least a fourth | |
746 | * of a full period. | |
747 | * | |
748 | * This is all moot if we don't need to use virtual periods. | |
749 | */ | |
750 | vperiod = runtime->period_size + 10; | |
751 | if (vperiod > period_size) { | |
752 | u16 tail = vperiod % period_size; | |
753 | u16 quarter_period = period_size / 4; | |
754 | ||
755 | if (tail && tail < quarter_period) { | |
756 | u16 loops = vperiod / period_size; | |
757 | ||
758 | tail = quarter_period - tail; | |
759 | tail += loops - 1; | |
760 | tail /= loops; | |
761 | period_size -= tail; | |
762 | } | |
763 | ||
764 | sso = period_size - 1; | |
765 | } else { | |
766 | /* The initial period will fit inside the buffer, so we | |
767 | * don't need to use virtual periods -- disable them. | |
768 | */ | |
769 | period_size = runtime->period_size; | |
770 | sso = vperiod - 1; | |
771 | vperiod = 0; | |
772 | } | |
773 | ||
774 | /* The interrupt handler implements the timing syncronization, so | |
775 | * setup its state. | |
776 | */ | |
777 | timing->flags |= VOICE_SYNC_TIMING; | |
778 | timing->sync_base = voice->ctrl_base; | |
779 | timing->sync_cso = runtime->period_size - 1; | |
780 | timing->sync_period_size = runtime->period_size; | |
781 | timing->sync_buffer_size = runtime->buffer_size; | |
782 | timing->period_size = period_size; | |
783 | timing->buffer_size = buffer_size; | |
784 | timing->sso = sso; | |
785 | timing->vperiod = vperiod; | |
786 | ||
787 | /* Using unsigned samples with the all-zero silence buffer | |
788 | * forces the output to the lower rail, killing playback. | |
789 | * So ignore unsigned vs signed -- it doesn't change the timing. | |
790 | */ | |
791 | format = 0; | |
792 | if (snd_pcm_format_width(runtime->format) == 8) | |
793 | format = SIS_CAPTURE_DMA_FORMAT_8BIT; | |
794 | if (runtime->channels == 1) | |
795 | format |= SIS_CAPTURE_DMA_FORMAT_MONO; | |
796 | ||
797 | control = timing->buffer_size - 1; | |
798 | control |= SIS_PLAY_DMA_LOOP | SIS_PLAY_DMA_INTR_AT_SSO; | |
799 | sso_eso = timing->buffer_size - 1; | |
800 | sso_eso |= timing->sso << 16; | |
801 | ||
802 | delta = sis_rate_to_delta(runtime->rate); | |
803 | ||
804 | /* We've done the math, now configure the channel. | |
805 | */ | |
806 | writel(format, play_base + SIS_PLAY_DMA_FORMAT_CSO); | |
807 | writel(sis->silence_dma_addr, play_base + SIS_PLAY_DMA_BASE); | |
808 | writel(control, play_base + SIS_PLAY_DMA_CONTROL); | |
809 | writel(sso_eso, play_base + SIS_PLAY_DMA_SSO_ESO); | |
810 | ||
811 | for (reg = 0; reg < SIS_WAVE_SIZE; reg += 4) | |
812 | writel(0, wave_base + reg); | |
813 | ||
814 | writel(SIS_WAVE_GENERAL_WAVE_VOLUME, wave_base + SIS_WAVE_GENERAL); | |
815 | writel(delta << 16, wave_base + SIS_WAVE_GENERAL_ARTICULATION); | |
816 | writel(SIS_WAVE_CHANNEL_CONTROL_FIRST_SAMPLE | | |
817 | SIS_WAVE_CHANNEL_CONTROL_AMP_ENABLE | | |
818 | SIS_WAVE_CHANNEL_CONTROL_INTERPOLATE_ENABLE, | |
819 | wave_base + SIS_WAVE_CHANNEL_CONTROL); | |
820 | } | |
821 | ||
822 | static int sis_pcm_capture_prepare(struct snd_pcm_substream *substream) | |
823 | { | |
824 | struct snd_pcm_runtime *runtime = substream->runtime; | |
825 | struct voice *voice = runtime->private_data; | |
826 | void __iomem *rec_base = voice->ctrl_base; | |
827 | u32 format, dma_addr, control; | |
828 | u16 leo; | |
829 | ||
830 | /* We rely on the PCM core to ensure that the parameters for this | |
831 | * substream do not change on us while we're programming the HW. | |
832 | */ | |
833 | format = 0; | |
834 | if (snd_pcm_format_width(runtime->format) == 8) | |
835 | format = SIS_CAPTURE_DMA_FORMAT_8BIT; | |
836 | if (!snd_pcm_format_signed(runtime->format)) | |
837 | format |= SIS_CAPTURE_DMA_FORMAT_UNSIGNED; | |
838 | if (runtime->channels == 1) | |
839 | format |= SIS_CAPTURE_DMA_FORMAT_MONO; | |
840 | ||
841 | dma_addr = runtime->dma_addr; | |
842 | leo = runtime->buffer_size - 1; | |
843 | control = leo | SIS_CAPTURE_DMA_LOOP; | |
844 | ||
845 | /* If we've got more than two periods per buffer, then we have | |
846 | * use a timing voice to clock out the periods. Otherwise, we can | |
847 | * use the capture channel's interrupts. | |
848 | */ | |
849 | if (voice->timing) { | |
850 | sis_prepare_timing_voice(voice, substream); | |
851 | } else { | |
852 | control |= SIS_CAPTURE_DMA_INTR_AT_LEO; | |
853 | if (runtime->period_size != runtime->buffer_size) | |
854 | control |= SIS_CAPTURE_DMA_INTR_AT_MLP; | |
855 | } | |
856 | ||
857 | writel(format, rec_base + SIS_CAPTURE_DMA_FORMAT_CSO); | |
858 | writel(dma_addr, rec_base + SIS_CAPTURE_DMA_BASE); | |
859 | writel(control, rec_base + SIS_CAPTURE_DMA_CONTROL); | |
860 | ||
861 | /* Force the writes to post. */ | |
862 | readl(rec_base); | |
863 | ||
864 | return 0; | |
865 | } | |
866 | ||
867 | static struct snd_pcm_ops sis_playback_ops = { | |
868 | .open = sis_playback_open, | |
869 | .close = sis_substream_close, | |
870 | .ioctl = snd_pcm_lib_ioctl, | |
871 | .hw_params = sis_playback_hw_params, | |
872 | .hw_free = sis_hw_free, | |
873 | .prepare = sis_pcm_playback_prepare, | |
874 | .trigger = sis_pcm_trigger, | |
875 | .pointer = sis_pcm_pointer, | |
876 | }; | |
877 | ||
878 | static struct snd_pcm_ops sis_capture_ops = { | |
879 | .open = sis_capture_open, | |
880 | .close = sis_substream_close, | |
881 | .ioctl = snd_pcm_lib_ioctl, | |
882 | .hw_params = sis_capture_hw_params, | |
883 | .hw_free = sis_hw_free, | |
884 | .prepare = sis_pcm_capture_prepare, | |
885 | .trigger = sis_pcm_trigger, | |
886 | .pointer = sis_pcm_pointer, | |
887 | }; | |
888 | ||
889 | static int __devinit sis_pcm_create(struct sis7019 *sis) | |
890 | { | |
891 | struct snd_pcm *pcm; | |
892 | int rc; | |
893 | ||
894 | /* We have 64 voices, and the driver currently records from | |
895 | * only one channel, though that could change in the future. | |
896 | */ | |
897 | rc = snd_pcm_new(sis->card, "SiS7019", 0, 64, 1, &pcm); | |
898 | if (rc) | |
899 | return rc; | |
900 | ||
901 | pcm->private_data = sis; | |
902 | strcpy(pcm->name, "SiS7019"); | |
903 | sis->pcm = pcm; | |
904 | ||
905 | snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &sis_playback_ops); | |
906 | snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &sis_capture_ops); | |
907 | ||
908 | /* Try to preallocate some memory, but it's not the end of the | |
909 | * world if this fails. | |
910 | */ | |
911 | snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV, | |
912 | snd_dma_pci_data(sis->pci), 64*1024, 128*1024); | |
913 | ||
914 | return 0; | |
915 | } | |
916 | ||
917 | static unsigned short sis_ac97_rw(struct sis7019 *sis, int codec, u32 cmd) | |
918 | { | |
919 | unsigned long io = sis->ioport; | |
920 | unsigned short val = 0xffff; | |
921 | u16 status; | |
922 | u16 rdy; | |
923 | int count; | |
3f76d984 | 924 | static const u16 codec_ready[3] = { |
175859bf DD |
925 | SIS_AC97_STATUS_CODEC_READY, |
926 | SIS_AC97_STATUS_CODEC2_READY, | |
927 | SIS_AC97_STATUS_CODEC3_READY, | |
928 | }; | |
929 | ||
930 | rdy = codec_ready[codec]; | |
931 | ||
932 | ||
933 | /* Get the AC97 semaphore -- software first, so we don't spin | |
934 | * pounding out IO reads on the hardware semaphore... | |
935 | */ | |
936 | mutex_lock(&sis->ac97_mutex); | |
937 | ||
938 | count = 0xffff; | |
939 | while ((inw(io + SIS_AC97_SEMA) & SIS_AC97_SEMA_BUSY) && --count) | |
940 | udelay(1); | |
941 | ||
942 | if (!count) | |
943 | goto timeout; | |
944 | ||
945 | /* ... and wait for any outstanding commands to complete ... | |
946 | */ | |
947 | count = 0xffff; | |
948 | do { | |
949 | status = inw(io + SIS_AC97_STATUS); | |
950 | if ((status & rdy) && !(status & SIS_AC97_STATUS_BUSY)) | |
951 | break; | |
952 | ||
953 | udelay(1); | |
954 | } while (--count); | |
955 | ||
956 | if (!count) | |
957 | goto timeout_sema; | |
958 | ||
959 | /* ... before sending our command and waiting for it to finish ... | |
960 | */ | |
961 | outl(cmd, io + SIS_AC97_CMD); | |
962 | udelay(10); | |
963 | ||
964 | count = 0xffff; | |
965 | while ((inw(io + SIS_AC97_STATUS) & SIS_AC97_STATUS_BUSY) && --count) | |
966 | udelay(1); | |
967 | ||
968 | /* ... and reading the results (if any). | |
969 | */ | |
970 | val = inl(io + SIS_AC97_CMD) >> 16; | |
971 | ||
972 | timeout_sema: | |
973 | outl(SIS_AC97_SEMA_RELEASE, io + SIS_AC97_SEMA); | |
974 | timeout: | |
975 | mutex_unlock(&sis->ac97_mutex); | |
976 | ||
977 | if (!count) { | |
978 | printk(KERN_ERR "sis7019: ac97 codec %d timeout cmd 0x%08x\n", | |
979 | codec, cmd); | |
980 | } | |
981 | ||
982 | return val; | |
983 | } | |
984 | ||
985 | static void sis_ac97_write(struct snd_ac97 *ac97, unsigned short reg, | |
986 | unsigned short val) | |
987 | { | |
3f76d984 | 988 | static const u32 cmd[3] = { |
175859bf DD |
989 | SIS_AC97_CMD_CODEC_WRITE, |
990 | SIS_AC97_CMD_CODEC2_WRITE, | |
991 | SIS_AC97_CMD_CODEC3_WRITE, | |
992 | }; | |
993 | sis_ac97_rw(ac97->private_data, ac97->num, | |
994 | (val << 16) | (reg << 8) | cmd[ac97->num]); | |
995 | } | |
996 | ||
997 | static unsigned short sis_ac97_read(struct snd_ac97 *ac97, unsigned short reg) | |
998 | { | |
3f76d984 | 999 | static const u32 cmd[3] = { |
175859bf DD |
1000 | SIS_AC97_CMD_CODEC_READ, |
1001 | SIS_AC97_CMD_CODEC2_READ, | |
1002 | SIS_AC97_CMD_CODEC3_READ, | |
1003 | }; | |
1004 | return sis_ac97_rw(ac97->private_data, ac97->num, | |
1005 | (reg << 8) | cmd[ac97->num]); | |
1006 | } | |
1007 | ||
1008 | static int __devinit sis_mixer_create(struct sis7019 *sis) | |
1009 | { | |
1010 | struct snd_ac97_bus *bus; | |
1011 | struct snd_ac97_template ac97; | |
1012 | static struct snd_ac97_bus_ops ops = { | |
1013 | .write = sis_ac97_write, | |
1014 | .read = sis_ac97_read, | |
1015 | }; | |
1016 | int rc; | |
1017 | ||
1018 | memset(&ac97, 0, sizeof(ac97)); | |
1019 | ac97.private_data = sis; | |
1020 | ||
1021 | rc = snd_ac97_bus(sis->card, 0, &ops, NULL, &bus); | |
1022 | if (!rc && sis->codecs_present & SIS_PRIMARY_CODEC_PRESENT) | |
1023 | rc = snd_ac97_mixer(bus, &ac97, &sis->ac97[0]); | |
1024 | ac97.num = 1; | |
1025 | if (!rc && (sis->codecs_present & SIS_SECONDARY_CODEC_PRESENT)) | |
1026 | rc = snd_ac97_mixer(bus, &ac97, &sis->ac97[1]); | |
1027 | ac97.num = 2; | |
1028 | if (!rc && (sis->codecs_present & SIS_TERTIARY_CODEC_PRESENT)) | |
1029 | rc = snd_ac97_mixer(bus, &ac97, &sis->ac97[2]); | |
1030 | ||
1031 | /* If we return an error here, then snd_card_free() should | |
1032 | * free up any ac97 codecs that got created, as well as the bus. | |
1033 | */ | |
1034 | return rc; | |
1035 | } | |
1036 | ||
1037 | static void sis_free_suspend(struct sis7019 *sis) | |
1038 | { | |
1039 | int i; | |
1040 | ||
1041 | for (i = 0; i < SIS_SUSPEND_PAGES; i++) | |
1042 | kfree(sis->suspend_state[i]); | |
1043 | } | |
1044 | ||
1045 | static int sis_chip_free(struct sis7019 *sis) | |
1046 | { | |
1047 | /* Reset the chip, and disable all interrputs. | |
1048 | */ | |
1049 | outl(SIS_GCR_SOFTWARE_RESET, sis->ioport + SIS_GCR); | |
1050 | udelay(10); | |
1051 | outl(0, sis->ioport + SIS_GCR); | |
1052 | outl(0, sis->ioport + SIS_GIER); | |
1053 | ||
1054 | /* Now, free everything we allocated. | |
1055 | */ | |
1056 | if (sis->irq >= 0) | |
1057 | free_irq(sis->irq, sis); | |
1058 | ||
1059 | if (sis->ioaddr) | |
1060 | iounmap(sis->ioaddr); | |
1061 | ||
1062 | pci_release_regions(sis->pci); | |
1063 | pci_disable_device(sis->pci); | |
1064 | ||
1065 | sis_free_suspend(sis); | |
1066 | return 0; | |
1067 | } | |
1068 | ||
1069 | static int sis_dev_free(struct snd_device *dev) | |
1070 | { | |
1071 | struct sis7019 *sis = dev->device_data; | |
1072 | return sis_chip_free(sis); | |
1073 | } | |
1074 | ||
1075 | static int sis_chip_init(struct sis7019 *sis) | |
1076 | { | |
1077 | unsigned long io = sis->ioport; | |
1078 | void __iomem *ioaddr = sis->ioaddr; | |
1079 | u16 status; | |
1080 | int count; | |
1081 | int i; | |
1082 | ||
1083 | /* Reset the audio controller | |
1084 | */ | |
1085 | outl(SIS_GCR_SOFTWARE_RESET, io + SIS_GCR); | |
1086 | udelay(10); | |
1087 | outl(0, io + SIS_GCR); | |
1088 | ||
1089 | /* Get the AC-link semaphore, and reset the codecs | |
1090 | */ | |
1091 | count = 0xffff; | |
1092 | while ((inw(io + SIS_AC97_SEMA) & SIS_AC97_SEMA_BUSY) && --count) | |
1093 | udelay(1); | |
1094 | ||
1095 | if (!count) | |
1096 | return -EIO; | |
1097 | ||
1098 | outl(SIS_AC97_CMD_CODEC_COLD_RESET, io + SIS_AC97_CMD); | |
1099 | udelay(10); | |
1100 | ||
1101 | count = 0xffff; | |
1102 | while ((inw(io + SIS_AC97_STATUS) & SIS_AC97_STATUS_BUSY) && --count) | |
1103 | udelay(1); | |
1104 | ||
1105 | /* Now that we've finished the reset, find out what's attached. | |
1106 | */ | |
1107 | status = inl(io + SIS_AC97_STATUS); | |
1108 | if (status & SIS_AC97_STATUS_CODEC_READY) | |
1109 | sis->codecs_present |= SIS_PRIMARY_CODEC_PRESENT; | |
1110 | if (status & SIS_AC97_STATUS_CODEC2_READY) | |
1111 | sis->codecs_present |= SIS_SECONDARY_CODEC_PRESENT; | |
1112 | if (status & SIS_AC97_STATUS_CODEC3_READY) | |
1113 | sis->codecs_present |= SIS_TERTIARY_CODEC_PRESENT; | |
1114 | ||
1115 | /* All done, let go of the semaphore, and check for errors | |
1116 | */ | |
1117 | outl(SIS_AC97_SEMA_RELEASE, io + SIS_AC97_SEMA); | |
1118 | if (!sis->codecs_present || !count) | |
1119 | return -EIO; | |
1120 | ||
1121 | /* Let the hardware know that the audio driver is alive, | |
1122 | * and enable PCM slots on the AC-link for L/R playback (3 & 4) and | |
1123 | * record channels. We're going to want to use Variable Rate Audio | |
1124 | * for recording, to avoid needlessly resampling from 48kHZ. | |
1125 | */ | |
1126 | outl(SIS_AC97_CONF_AUDIO_ALIVE, io + SIS_AC97_CONF); | |
1127 | outl(SIS_AC97_CONF_AUDIO_ALIVE | SIS_AC97_CONF_PCM_LR_ENABLE | | |
1128 | SIS_AC97_CONF_PCM_CAP_MIC_ENABLE | | |
1129 | SIS_AC97_CONF_PCM_CAP_LR_ENABLE | | |
1130 | SIS_AC97_CONF_CODEC_VRA_ENABLE, io + SIS_AC97_CONF); | |
1131 | ||
1132 | /* All AC97 PCM slots should be sourced from sub-mixer 0. | |
1133 | */ | |
1134 | outl(0, io + SIS_AC97_PSR); | |
1135 | ||
1136 | /* There is only one valid DMA setup for a PCI environment. | |
1137 | */ | |
1138 | outl(SIS_DMA_CSR_PCI_SETTINGS, io + SIS_DMA_CSR); | |
1139 | ||
1140 | /* Reset the syncronization groups for all of the channels | |
1141 | * to be asyncronous. If we start doing SPDIF or 5.1 sound, etc. | |
1142 | * we'll need to change how we handle these. Until then, we just | |
1143 | * assign sub-mixer 0 to all playback channels, and avoid any | |
1144 | * attenuation on the audio. | |
1145 | */ | |
1146 | outl(0, io + SIS_PLAY_SYNC_GROUP_A); | |
1147 | outl(0, io + SIS_PLAY_SYNC_GROUP_B); | |
1148 | outl(0, io + SIS_PLAY_SYNC_GROUP_C); | |
1149 | outl(0, io + SIS_PLAY_SYNC_GROUP_D); | |
1150 | outl(0, io + SIS_MIXER_SYNC_GROUP); | |
1151 | ||
1152 | for (i = 0; i < 64; i++) { | |
1153 | writel(i, SIS_MIXER_START_ADDR(ioaddr, i)); | |
1154 | writel(SIS_MIXER_RIGHT_NO_ATTEN | SIS_MIXER_LEFT_NO_ATTEN | | |
1155 | SIS_MIXER_DEST_0, SIS_MIXER_ADDR(ioaddr, i)); | |
1156 | } | |
1157 | ||
1158 | /* Don't attenuate any audio set for the wave amplifier. | |
1159 | * | |
1160 | * FIXME: Maximum attenuation is set for the music amp, which will | |
1161 | * need to change if we start using the synth engine. | |
1162 | */ | |
1163 | outl(0xffff0000, io + SIS_WEVCR); | |
1164 | ||
1165 | /* Ensure that the wave engine is in normal operating mode. | |
1166 | */ | |
1167 | outl(0, io + SIS_WECCR); | |
1168 | ||
1169 | /* Go ahead and enable the DMA interrupts. They won't go live | |
1170 | * until we start a channel. | |
1171 | */ | |
1172 | outl(SIS_GIER_AUDIO_PLAY_DMA_IRQ_ENABLE | | |
1173 | SIS_GIER_AUDIO_RECORD_DMA_IRQ_ENABLE, io + SIS_GIER); | |
1174 | ||
1175 | return 0; | |
1176 | } | |
1177 | ||
1178 | #ifdef CONFIG_PM | |
1179 | static int sis_suspend(struct pci_dev *pci, pm_message_t state) | |
1180 | { | |
1181 | struct snd_card *card = pci_get_drvdata(pci); | |
1182 | struct sis7019 *sis = card->private_data; | |
1183 | void __iomem *ioaddr = sis->ioaddr; | |
1184 | int i; | |
1185 | ||
1186 | snd_power_change_state(card, SNDRV_CTL_POWER_D3hot); | |
1187 | snd_pcm_suspend_all(sis->pcm); | |
1188 | if (sis->codecs_present & SIS_PRIMARY_CODEC_PRESENT) | |
1189 | snd_ac97_suspend(sis->ac97[0]); | |
1190 | if (sis->codecs_present & SIS_SECONDARY_CODEC_PRESENT) | |
1191 | snd_ac97_suspend(sis->ac97[1]); | |
1192 | if (sis->codecs_present & SIS_TERTIARY_CODEC_PRESENT) | |
1193 | snd_ac97_suspend(sis->ac97[2]); | |
1194 | ||
1195 | /* snd_pcm_suspend_all() stopped all channels, so we're quiescent. | |
1196 | */ | |
1197 | if (sis->irq >= 0) { | |
175859bf DD |
1198 | free_irq(sis->irq, sis); |
1199 | sis->irq = -1; | |
1200 | } | |
1201 | ||
1202 | /* Save the internal state away | |
1203 | */ | |
1204 | for (i = 0; i < 4; i++) { | |
1205 | memcpy_fromio(sis->suspend_state[i], ioaddr, 4096); | |
1206 | ioaddr += 4096; | |
1207 | } | |
1208 | ||
1209 | pci_disable_device(pci); | |
1210 | pci_save_state(pci); | |
1211 | pci_set_power_state(pci, pci_choose_state(pci, state)); | |
1212 | return 0; | |
1213 | } | |
1214 | ||
1215 | static int sis_resume(struct pci_dev *pci) | |
1216 | { | |
1217 | struct snd_card *card = pci_get_drvdata(pci); | |
1218 | struct sis7019 *sis = card->private_data; | |
1219 | void __iomem *ioaddr = sis->ioaddr; | |
1220 | int i; | |
1221 | ||
1222 | pci_set_power_state(pci, PCI_D0); | |
1223 | pci_restore_state(pci); | |
1224 | ||
1225 | if (pci_enable_device(pci) < 0) { | |
1226 | printk(KERN_ERR "sis7019: unable to re-enable device\n"); | |
1227 | goto error; | |
1228 | } | |
1229 | ||
1230 | if (sis_chip_init(sis)) { | |
1231 | printk(KERN_ERR "sis7019: unable to re-init controller\n"); | |
1232 | goto error; | |
1233 | } | |
1234 | ||
1235 | if (request_irq(pci->irq, sis_interrupt, IRQF_DISABLED|IRQF_SHARED, | |
1236 | card->shortname, sis)) { | |
1237 | printk(KERN_ERR "sis7019: unable to regain IRQ %d\n", pci->irq); | |
1238 | goto error; | |
1239 | } | |
1240 | ||
1241 | /* Restore saved state, then clear out the page we use for the | |
1242 | * silence buffer. | |
1243 | */ | |
1244 | for (i = 0; i < 4; i++) { | |
1245 | memcpy_toio(ioaddr, sis->suspend_state[i], 4096); | |
1246 | ioaddr += 4096; | |
1247 | } | |
1248 | ||
1249 | memset(sis->suspend_state[0], 0, 4096); | |
1250 | ||
1251 | sis->irq = pci->irq; | |
1252 | pci_set_master(pci); | |
1253 | ||
1254 | if (sis->codecs_present & SIS_PRIMARY_CODEC_PRESENT) | |
1255 | snd_ac97_resume(sis->ac97[0]); | |
1256 | if (sis->codecs_present & SIS_SECONDARY_CODEC_PRESENT) | |
1257 | snd_ac97_resume(sis->ac97[1]); | |
1258 | if (sis->codecs_present & SIS_TERTIARY_CODEC_PRESENT) | |
1259 | snd_ac97_resume(sis->ac97[2]); | |
1260 | ||
1261 | snd_power_change_state(card, SNDRV_CTL_POWER_D0); | |
1262 | return 0; | |
1263 | ||
1264 | error: | |
1265 | snd_card_disconnect(card); | |
1266 | return -EIO; | |
1267 | } | |
1268 | #endif /* CONFIG_PM */ | |
1269 | ||
1270 | static int sis_alloc_suspend(struct sis7019 *sis) | |
1271 | { | |
1272 | int i; | |
1273 | ||
1274 | /* We need 16K to store the internal wave engine state during a | |
1275 | * suspend, but we don't need it to be contiguous, so play nice | |
1276 | * with the memory system. We'll also use this area for a silence | |
1277 | * buffer. | |
1278 | */ | |
1279 | for (i = 0; i < SIS_SUSPEND_PAGES; i++) { | |
1280 | sis->suspend_state[i] = kmalloc(4096, GFP_KERNEL); | |
1281 | if (!sis->suspend_state[i]) | |
1282 | return -ENOMEM; | |
1283 | } | |
1284 | memset(sis->suspend_state[0], 0, 4096); | |
1285 | ||
1286 | return 0; | |
1287 | } | |
1288 | ||
1289 | static int __devinit sis_chip_create(struct snd_card *card, | |
1290 | struct pci_dev *pci) | |
1291 | { | |
1292 | struct sis7019 *sis = card->private_data; | |
1293 | struct voice *voice; | |
1294 | static struct snd_device_ops ops = { | |
1295 | .dev_free = sis_dev_free, | |
1296 | }; | |
1297 | int rc; | |
1298 | int i; | |
1299 | ||
1300 | rc = pci_enable_device(pci); | |
1301 | if (rc) | |
1302 | goto error_out; | |
1303 | ||
28b76796 | 1304 | if (pci_set_dma_mask(pci, DMA_BIT_MASK(30)) < 0) { |
175859bf DD |
1305 | printk(KERN_ERR "sis7019: architecture does not support " |
1306 | "30-bit PCI busmaster DMA"); | |
1307 | goto error_out_enabled; | |
1308 | } | |
1309 | ||
1310 | memset(sis, 0, sizeof(*sis)); | |
1311 | mutex_init(&sis->ac97_mutex); | |
1312 | spin_lock_init(&sis->voice_lock); | |
1313 | sis->card = card; | |
1314 | sis->pci = pci; | |
1315 | sis->irq = -1; | |
1316 | sis->ioport = pci_resource_start(pci, 0); | |
1317 | ||
1318 | rc = pci_request_regions(pci, "SiS7019"); | |
1319 | if (rc) { | |
1320 | printk(KERN_ERR "sis7019: unable request regions\n"); | |
1321 | goto error_out_enabled; | |
1322 | } | |
1323 | ||
1324 | rc = -EIO; | |
1325 | sis->ioaddr = ioremap_nocache(pci_resource_start(pci, 1), 0x4000); | |
1326 | if (!sis->ioaddr) { | |
1327 | printk(KERN_ERR "sis7019: unable to remap MMIO, aborting\n"); | |
1328 | goto error_out_cleanup; | |
1329 | } | |
1330 | ||
1331 | rc = sis_alloc_suspend(sis); | |
1332 | if (rc < 0) { | |
1333 | printk(KERN_ERR "sis7019: unable to allocate state storage\n"); | |
1334 | goto error_out_cleanup; | |
1335 | } | |
1336 | ||
1337 | rc = sis_chip_init(sis); | |
1338 | if (rc) | |
1339 | goto error_out_cleanup; | |
1340 | ||
1341 | if (request_irq(pci->irq, sis_interrupt, IRQF_DISABLED|IRQF_SHARED, | |
1342 | card->shortname, sis)) { | |
1343 | printk(KERN_ERR "unable to allocate irq %d\n", sis->irq); | |
1344 | goto error_out_cleanup; | |
1345 | } | |
1346 | ||
1347 | sis->irq = pci->irq; | |
1348 | pci_set_master(pci); | |
1349 | ||
1350 | for (i = 0; i < 64; i++) { | |
1351 | voice = &sis->voices[i]; | |
1352 | voice->num = i; | |
1353 | voice->ctrl_base = SIS_PLAY_DMA_ADDR(sis->ioaddr, i); | |
1354 | voice->wave_base = SIS_WAVE_ADDR(sis->ioaddr, i); | |
1355 | } | |
1356 | ||
1357 | voice = &sis->capture_voice; | |
1358 | voice->flags = VOICE_CAPTURE; | |
1359 | voice->num = SIS_CAPTURE_CHAN_AC97_PCM_IN; | |
1360 | voice->ctrl_base = SIS_CAPTURE_DMA_ADDR(sis->ioaddr, voice->num); | |
1361 | ||
1362 | rc = snd_device_new(card, SNDRV_DEV_LOWLEVEL, sis, &ops); | |
1363 | if (rc) | |
1364 | goto error_out_cleanup; | |
1365 | ||
1366 | snd_card_set_dev(card, &pci->dev); | |
1367 | ||
1368 | return 0; | |
1369 | ||
1370 | error_out_cleanup: | |
1371 | sis_chip_free(sis); | |
1372 | ||
1373 | error_out_enabled: | |
1374 | pci_disable_device(pci); | |
1375 | ||
1376 | error_out: | |
1377 | return rc; | |
1378 | } | |
1379 | ||
1380 | static int __devinit snd_sis7019_probe(struct pci_dev *pci, | |
1381 | const struct pci_device_id *pci_id) | |
1382 | { | |
1383 | struct snd_card *card; | |
1384 | struct sis7019 *sis; | |
1385 | int rc; | |
1386 | ||
1387 | rc = -ENOENT; | |
1388 | if (!enable) | |
1389 | goto error_out; | |
1390 | ||
e58de7ba TI |
1391 | rc = snd_card_create(index, id, THIS_MODULE, sizeof(*sis), &card); |
1392 | if (rc < 0) | |
175859bf DD |
1393 | goto error_out; |
1394 | ||
1395 | strcpy(card->driver, "SiS7019"); | |
1396 | strcpy(card->shortname, "SiS7019"); | |
1397 | rc = sis_chip_create(card, pci); | |
1398 | if (rc) | |
1399 | goto card_error_out; | |
1400 | ||
1401 | sis = card->private_data; | |
1402 | ||
1403 | rc = sis_mixer_create(sis); | |
1404 | if (rc) | |
1405 | goto card_error_out; | |
1406 | ||
1407 | rc = sis_pcm_create(sis); | |
1408 | if (rc) | |
1409 | goto card_error_out; | |
1410 | ||
1411 | snprintf(card->longname, sizeof(card->longname), | |
1412 | "%s Audio Accelerator with %s at 0x%lx, irq %d", | |
1413 | card->shortname, snd_ac97_get_short_name(sis->ac97[0]), | |
1414 | sis->ioport, sis->irq); | |
1415 | ||
1416 | rc = snd_card_register(card); | |
1417 | if (rc) | |
1418 | goto card_error_out; | |
1419 | ||
1420 | pci_set_drvdata(pci, card); | |
1421 | return 0; | |
1422 | ||
1423 | card_error_out: | |
1424 | snd_card_free(card); | |
1425 | ||
1426 | error_out: | |
1427 | return rc; | |
1428 | } | |
1429 | ||
1430 | static void __devexit snd_sis7019_remove(struct pci_dev *pci) | |
1431 | { | |
1432 | snd_card_free(pci_get_drvdata(pci)); | |
1433 | pci_set_drvdata(pci, NULL); | |
1434 | } | |
1435 | ||
1436 | static struct pci_driver sis7019_driver = { | |
1437 | .name = "SiS7019", | |
1438 | .id_table = snd_sis7019_ids, | |
1439 | .probe = snd_sis7019_probe, | |
1440 | .remove = __devexit_p(snd_sis7019_remove), | |
1441 | ||
1442 | #ifdef CONFIG_PM | |
1443 | .suspend = sis_suspend, | |
1444 | .resume = sis_resume, | |
1445 | #endif | |
1446 | }; | |
1447 | ||
1448 | static int __init sis7019_init(void) | |
1449 | { | |
1450 | return pci_register_driver(&sis7019_driver); | |
1451 | } | |
1452 | ||
1453 | static void __exit sis7019_exit(void) | |
1454 | { | |
1455 | pci_unregister_driver(&sis7019_driver); | |
1456 | } | |
1457 | ||
1458 | module_init(sis7019_init); | |
1459 | module_exit(sis7019_exit); |