]>
Commit | Line | Data |
---|---|---|
17467f23 TT |
1 | /* |
2 | * Freescale SSI ALSA SoC Digital Audio Interface (DAI) driver | |
3 | * | |
4 | * Author: Timur Tabi <timur@freescale.com> | |
5 | * | |
6 | * Copyright 2007-2008 Freescale Semiconductor, Inc. This file is licensed | |
7 | * under the terms of the GNU General Public License version 2. This | |
8 | * program is licensed "as is" without any warranty of any kind, whether | |
9 | * express or implied. | |
10 | */ | |
11 | ||
12 | #include <linux/init.h> | |
13 | #include <linux/module.h> | |
14 | #include <linux/interrupt.h> | |
15 | #include <linux/device.h> | |
16 | #include <linux/delay.h> | |
17 | ||
17467f23 TT |
18 | #include <sound/core.h> |
19 | #include <sound/pcm.h> | |
20 | #include <sound/pcm_params.h> | |
21 | #include <sound/initval.h> | |
22 | #include <sound/soc.h> | |
23 | ||
24 | #include <asm/immap_86xx.h> | |
25 | ||
26 | #include "fsl_ssi.h" | |
27 | ||
28 | /** | |
29 | * FSLSSI_I2S_RATES: sample rates supported by the I2S | |
30 | * | |
31 | * This driver currently only supports the SSI running in I2S slave mode, | |
32 | * which means the codec determines the sample rate. Therefore, we tell | |
33 | * ALSA that we support all rates and let the codec driver decide what rates | |
34 | * are really supported. | |
35 | */ | |
36 | #define FSLSSI_I2S_RATES (SNDRV_PCM_RATE_5512 | SNDRV_PCM_RATE_8000_192000 | \ | |
37 | SNDRV_PCM_RATE_CONTINUOUS) | |
38 | ||
39 | /** | |
40 | * FSLSSI_I2S_FORMATS: audio formats supported by the SSI | |
41 | * | |
42 | * This driver currently only supports the SSI running in I2S slave mode. | |
43 | * | |
44 | * The SSI has a limitation in that the samples must be in the same byte | |
45 | * order as the host CPU. This is because when multiple bytes are written | |
46 | * to the STX register, the bytes and bits must be written in the same | |
47 | * order. The STX is a shift register, so all the bits need to be aligned | |
48 | * (bit-endianness must match byte-endianness). Processors typically write | |
49 | * the bits within a byte in the same order that the bytes of a word are | |
50 | * written in. So if the host CPU is big-endian, then only big-endian | |
51 | * samples will be written to STX properly. | |
52 | */ | |
53 | #ifdef __BIG_ENDIAN | |
54 | #define FSLSSI_I2S_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_BE | \ | |
55 | SNDRV_PCM_FMTBIT_S18_3BE | SNDRV_PCM_FMTBIT_S20_3BE | \ | |
56 | SNDRV_PCM_FMTBIT_S24_3BE | SNDRV_PCM_FMTBIT_S24_BE) | |
57 | #else | |
58 | #define FSLSSI_I2S_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE | \ | |
59 | SNDRV_PCM_FMTBIT_S18_3LE | SNDRV_PCM_FMTBIT_S20_3LE | \ | |
60 | SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S24_LE) | |
61 | #endif | |
62 | ||
63 | /** | |
64 | * fsl_ssi_private: per-SSI private data | |
65 | * | |
66 | * @name: short name for this device ("SSI0", "SSI1", etc) | |
67 | * @ssi: pointer to the SSI's registers | |
68 | * @ssi_phys: physical address of the SSI registers | |
69 | * @irq: IRQ of this SSI | |
be41e941 TT |
70 | * @first_stream: pointer to the stream that was opened first |
71 | * @second_stream: pointer to second stream | |
17467f23 TT |
72 | * @dev: struct device pointer |
73 | * @playback: the number of playback streams opened | |
74 | * @capture: the number of capture streams opened | |
75 | * @cpu_dai: the CPU DAI for this device | |
76 | * @dev_attr: the sysfs device attribute structure | |
77 | * @stats: SSI statistics | |
78 | */ | |
79 | struct fsl_ssi_private { | |
80 | char name[8]; | |
81 | struct ccsr_ssi __iomem *ssi; | |
82 | dma_addr_t ssi_phys; | |
83 | unsigned int irq; | |
be41e941 TT |
84 | struct snd_pcm_substream *first_stream; |
85 | struct snd_pcm_substream *second_stream; | |
17467f23 TT |
86 | struct device *dev; |
87 | unsigned int playback; | |
88 | unsigned int capture; | |
8cf7b2b3 | 89 | struct snd_soc_dai cpu_dai; |
17467f23 TT |
90 | struct device_attribute dev_attr; |
91 | ||
92 | struct { | |
93 | unsigned int rfrc; | |
94 | unsigned int tfrc; | |
95 | unsigned int cmdau; | |
96 | unsigned int cmddu; | |
97 | unsigned int rxt; | |
98 | unsigned int rdr1; | |
99 | unsigned int rdr0; | |
100 | unsigned int tde1; | |
101 | unsigned int tde0; | |
102 | unsigned int roe1; | |
103 | unsigned int roe0; | |
104 | unsigned int tue1; | |
105 | unsigned int tue0; | |
106 | unsigned int tfs; | |
107 | unsigned int rfs; | |
108 | unsigned int tls; | |
109 | unsigned int rls; | |
110 | unsigned int rff1; | |
111 | unsigned int rff0; | |
112 | unsigned int tfe1; | |
113 | unsigned int tfe0; | |
114 | } stats; | |
115 | }; | |
116 | ||
117 | /** | |
118 | * fsl_ssi_isr: SSI interrupt handler | |
119 | * | |
120 | * Although it's possible to use the interrupt handler to send and receive | |
121 | * data to/from the SSI, we use the DMA instead. Programming is more | |
122 | * complicated, but the performance is much better. | |
123 | * | |
124 | * This interrupt handler is used only to gather statistics. | |
125 | * | |
126 | * @irq: IRQ of the SSI device | |
127 | * @dev_id: pointer to the ssi_private structure for this SSI device | |
128 | */ | |
129 | static irqreturn_t fsl_ssi_isr(int irq, void *dev_id) | |
130 | { | |
131 | struct fsl_ssi_private *ssi_private = dev_id; | |
132 | struct ccsr_ssi __iomem *ssi = ssi_private->ssi; | |
133 | irqreturn_t ret = IRQ_NONE; | |
134 | __be32 sisr; | |
135 | __be32 sisr2 = 0; | |
136 | ||
137 | /* We got an interrupt, so read the status register to see what we | |
138 | were interrupted for. We mask it with the Interrupt Enable register | |
139 | so that we only check for events that we're interested in. | |
140 | */ | |
141 | sisr = in_be32(&ssi->sisr) & in_be32(&ssi->sier); | |
142 | ||
143 | if (sisr & CCSR_SSI_SISR_RFRC) { | |
144 | ssi_private->stats.rfrc++; | |
145 | sisr2 |= CCSR_SSI_SISR_RFRC; | |
146 | ret = IRQ_HANDLED; | |
147 | } | |
148 | ||
149 | if (sisr & CCSR_SSI_SISR_TFRC) { | |
150 | ssi_private->stats.tfrc++; | |
151 | sisr2 |= CCSR_SSI_SISR_TFRC; | |
152 | ret = IRQ_HANDLED; | |
153 | } | |
154 | ||
155 | if (sisr & CCSR_SSI_SISR_CMDAU) { | |
156 | ssi_private->stats.cmdau++; | |
157 | ret = IRQ_HANDLED; | |
158 | } | |
159 | ||
160 | if (sisr & CCSR_SSI_SISR_CMDDU) { | |
161 | ssi_private->stats.cmddu++; | |
162 | ret = IRQ_HANDLED; | |
163 | } | |
164 | ||
165 | if (sisr & CCSR_SSI_SISR_RXT) { | |
166 | ssi_private->stats.rxt++; | |
167 | ret = IRQ_HANDLED; | |
168 | } | |
169 | ||
170 | if (sisr & CCSR_SSI_SISR_RDR1) { | |
171 | ssi_private->stats.rdr1++; | |
172 | ret = IRQ_HANDLED; | |
173 | } | |
174 | ||
175 | if (sisr & CCSR_SSI_SISR_RDR0) { | |
176 | ssi_private->stats.rdr0++; | |
177 | ret = IRQ_HANDLED; | |
178 | } | |
179 | ||
180 | if (sisr & CCSR_SSI_SISR_TDE1) { | |
181 | ssi_private->stats.tde1++; | |
182 | ret = IRQ_HANDLED; | |
183 | } | |
184 | ||
185 | if (sisr & CCSR_SSI_SISR_TDE0) { | |
186 | ssi_private->stats.tde0++; | |
187 | ret = IRQ_HANDLED; | |
188 | } | |
189 | ||
190 | if (sisr & CCSR_SSI_SISR_ROE1) { | |
191 | ssi_private->stats.roe1++; | |
192 | sisr2 |= CCSR_SSI_SISR_ROE1; | |
193 | ret = IRQ_HANDLED; | |
194 | } | |
195 | ||
196 | if (sisr & CCSR_SSI_SISR_ROE0) { | |
197 | ssi_private->stats.roe0++; | |
198 | sisr2 |= CCSR_SSI_SISR_ROE0; | |
199 | ret = IRQ_HANDLED; | |
200 | } | |
201 | ||
202 | if (sisr & CCSR_SSI_SISR_TUE1) { | |
203 | ssi_private->stats.tue1++; | |
204 | sisr2 |= CCSR_SSI_SISR_TUE1; | |
205 | ret = IRQ_HANDLED; | |
206 | } | |
207 | ||
208 | if (sisr & CCSR_SSI_SISR_TUE0) { | |
209 | ssi_private->stats.tue0++; | |
210 | sisr2 |= CCSR_SSI_SISR_TUE0; | |
211 | ret = IRQ_HANDLED; | |
212 | } | |
213 | ||
214 | if (sisr & CCSR_SSI_SISR_TFS) { | |
215 | ssi_private->stats.tfs++; | |
216 | ret = IRQ_HANDLED; | |
217 | } | |
218 | ||
219 | if (sisr & CCSR_SSI_SISR_RFS) { | |
220 | ssi_private->stats.rfs++; | |
221 | ret = IRQ_HANDLED; | |
222 | } | |
223 | ||
224 | if (sisr & CCSR_SSI_SISR_TLS) { | |
225 | ssi_private->stats.tls++; | |
226 | ret = IRQ_HANDLED; | |
227 | } | |
228 | ||
229 | if (sisr & CCSR_SSI_SISR_RLS) { | |
230 | ssi_private->stats.rls++; | |
231 | ret = IRQ_HANDLED; | |
232 | } | |
233 | ||
234 | if (sisr & CCSR_SSI_SISR_RFF1) { | |
235 | ssi_private->stats.rff1++; | |
236 | ret = IRQ_HANDLED; | |
237 | } | |
238 | ||
239 | if (sisr & CCSR_SSI_SISR_RFF0) { | |
240 | ssi_private->stats.rff0++; | |
241 | ret = IRQ_HANDLED; | |
242 | } | |
243 | ||
244 | if (sisr & CCSR_SSI_SISR_TFE1) { | |
245 | ssi_private->stats.tfe1++; | |
246 | ret = IRQ_HANDLED; | |
247 | } | |
248 | ||
249 | if (sisr & CCSR_SSI_SISR_TFE0) { | |
250 | ssi_private->stats.tfe0++; | |
251 | ret = IRQ_HANDLED; | |
252 | } | |
253 | ||
254 | /* Clear the bits that we set */ | |
255 | if (sisr2) | |
256 | out_be32(&ssi->sisr, sisr2); | |
257 | ||
258 | return ret; | |
259 | } | |
260 | ||
261 | /** | |
262 | * fsl_ssi_startup: create a new substream | |
263 | * | |
264 | * This is the first function called when a stream is opened. | |
265 | * | |
266 | * If this is the first stream open, then grab the IRQ and program most of | |
267 | * the SSI registers. | |
268 | */ | |
dee89c4d MB |
269 | static int fsl_ssi_startup(struct snd_pcm_substream *substream, |
270 | struct snd_soc_dai *dai) | |
17467f23 TT |
271 | { |
272 | struct snd_soc_pcm_runtime *rtd = substream->private_data; | |
273 | struct fsl_ssi_private *ssi_private = rtd->dai->cpu_dai->private_data; | |
274 | ||
275 | /* | |
276 | * If this is the first stream opened, then request the IRQ | |
277 | * and initialize the SSI registers. | |
278 | */ | |
279 | if (!ssi_private->playback && !ssi_private->capture) { | |
280 | struct ccsr_ssi __iomem *ssi = ssi_private->ssi; | |
281 | int ret; | |
282 | ||
283 | ret = request_irq(ssi_private->irq, fsl_ssi_isr, 0, | |
284 | ssi_private->name, ssi_private); | |
285 | if (ret < 0) { | |
286 | dev_err(substream->pcm->card->dev, | |
287 | "could not claim irq %u\n", ssi_private->irq); | |
288 | return ret; | |
289 | } | |
290 | ||
291 | /* | |
292 | * Section 16.5 of the MPC8610 reference manual says that the | |
293 | * SSI needs to be disabled before updating the registers we set | |
294 | * here. | |
295 | */ | |
296 | clrbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN); | |
297 | ||
298 | /* | |
299 | * Program the SSI into I2S Slave Non-Network Synchronous mode. | |
300 | * Also enable the transmit and receive FIFO. | |
301 | * | |
302 | * FIXME: Little-endian samples require a different shift dir | |
303 | */ | |
304 | clrsetbits_be32(&ssi->scr, CCSR_SSI_SCR_I2S_MODE_MASK, | |
305 | CCSR_SSI_SCR_TFR_CLK_DIS | | |
306 | CCSR_SSI_SCR_I2S_MODE_SLAVE | CCSR_SSI_SCR_SYN); | |
307 | ||
308 | out_be32(&ssi->stcr, | |
309 | CCSR_SSI_STCR_TXBIT0 | CCSR_SSI_STCR_TFEN0 | | |
310 | CCSR_SSI_STCR_TFSI | CCSR_SSI_STCR_TEFS | | |
311 | CCSR_SSI_STCR_TSCKP); | |
312 | ||
313 | out_be32(&ssi->srcr, | |
314 | CCSR_SSI_SRCR_RXBIT0 | CCSR_SSI_SRCR_RFEN0 | | |
315 | CCSR_SSI_SRCR_RFSI | CCSR_SSI_SRCR_REFS | | |
316 | CCSR_SSI_SRCR_RSCKP); | |
317 | ||
318 | /* | |
319 | * The DC and PM bits are only used if the SSI is the clock | |
320 | * master. | |
321 | */ | |
322 | ||
323 | /* 4. Enable the interrupts and DMA requests */ | |
324 | out_be32(&ssi->sier, | |
325 | CCSR_SSI_SIER_TFRC_EN | CCSR_SSI_SIER_TDMAE | | |
326 | CCSR_SSI_SIER_TIE | CCSR_SSI_SIER_TUE0_EN | | |
327 | CCSR_SSI_SIER_TUE1_EN | CCSR_SSI_SIER_RFRC_EN | | |
328 | CCSR_SSI_SIER_RDMAE | CCSR_SSI_SIER_RIE | | |
329 | CCSR_SSI_SIER_ROE0_EN | CCSR_SSI_SIER_ROE1_EN); | |
330 | ||
331 | /* | |
332 | * Set the watermark for transmit FIFI 0 and receive FIFO 0. We | |
333 | * don't use FIFO 1. Since the SSI only supports stereo, the | |
334 | * watermark should never be an odd number. | |
335 | */ | |
336 | out_be32(&ssi->sfcsr, | |
337 | CCSR_SSI_SFCSR_TFWM0(6) | CCSR_SSI_SFCSR_RFWM0(2)); | |
338 | ||
339 | /* | |
340 | * We keep the SSI disabled because if we enable it, then the | |
341 | * DMA controller will start. It's not supposed to start until | |
342 | * the SCR.TE (or SCR.RE) bit is set, but it does anyway. The | |
343 | * DMA controller will transfer one "BWC" of data (i.e. the | |
344 | * amount of data that the MR.BWC bits are set to). The reason | |
345 | * this is bad is because at this point, the PCM driver has not | |
346 | * finished initializing the DMA controller. | |
347 | */ | |
348 | } | |
349 | ||
be41e941 TT |
350 | if (!ssi_private->first_stream) |
351 | ssi_private->first_stream = substream; | |
352 | else { | |
353 | /* This is the second stream open, so we need to impose sample | |
354 | * rate and maybe sample size constraints. Note that this can | |
355 | * cause a race condition if the second stream is opened before | |
356 | * the first stream is fully initialized. | |
357 | * | |
358 | * We provide some protection by checking to make sure the first | |
359 | * stream is initialized, but it's not perfect. ALSA sometimes | |
360 | * re-initializes the driver with a different sample rate or | |
361 | * size. If the second stream is opened before the first stream | |
362 | * has received its final parameters, then the second stream may | |
363 | * be constrained to the wrong sample rate or size. | |
364 | * | |
365 | * FIXME: This code does not handle opening and closing streams | |
366 | * repeatedly. If you open two streams and then close the first | |
367 | * one, you may not be able to open another stream until you | |
368 | * close the second one as well. | |
369 | */ | |
370 | struct snd_pcm_runtime *first_runtime = | |
371 | ssi_private->first_stream->runtime; | |
372 | ||
373 | if (!first_runtime->rate || !first_runtime->sample_bits) { | |
374 | dev_err(substream->pcm->card->dev, | |
375 | "set sample rate and size in %s stream first\n", | |
376 | substream->stream == SNDRV_PCM_STREAM_PLAYBACK | |
377 | ? "capture" : "playback"); | |
378 | return -EAGAIN; | |
379 | } | |
380 | ||
381 | snd_pcm_hw_constraint_minmax(substream->runtime, | |
382 | SNDRV_PCM_HW_PARAM_RATE, | |
383 | first_runtime->rate, first_runtime->rate); | |
384 | ||
385 | snd_pcm_hw_constraint_minmax(substream->runtime, | |
386 | SNDRV_PCM_HW_PARAM_SAMPLE_BITS, | |
387 | first_runtime->sample_bits, | |
388 | first_runtime->sample_bits); | |
389 | ||
390 | ssi_private->second_stream = substream; | |
391 | } | |
392 | ||
17467f23 TT |
393 | if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) |
394 | ssi_private->playback++; | |
395 | ||
396 | if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) | |
397 | ssi_private->capture++; | |
398 | ||
399 | return 0; | |
400 | } | |
401 | ||
402 | /** | |
85ef2375 | 403 | * fsl_ssi_hw_params - program the sample size |
17467f23 TT |
404 | * |
405 | * Most of the SSI registers have been programmed in the startup function, | |
406 | * but the word length must be programmed here. Unfortunately, programming | |
407 | * the SxCCR.WL bits requires the SSI to be temporarily disabled. This can | |
408 | * cause a problem with supporting simultaneous playback and capture. If | |
409 | * the SSI is already playing a stream, then that stream may be temporarily | |
410 | * stopped when you start capture. | |
411 | * | |
412 | * Note: The SxCCR.DC and SxCCR.PM bits are only used if the SSI is the | |
413 | * clock master. | |
414 | */ | |
85ef2375 TT |
415 | static int fsl_ssi_hw_params(struct snd_pcm_substream *substream, |
416 | struct snd_pcm_hw_params *hw_params, struct snd_soc_dai *cpu_dai) | |
17467f23 | 417 | { |
85ef2375 | 418 | struct fsl_ssi_private *ssi_private = cpu_dai->private_data; |
17467f23 | 419 | |
be41e941 | 420 | if (substream == ssi_private->first_stream) { |
85ef2375 TT |
421 | struct ccsr_ssi __iomem *ssi = ssi_private->ssi; |
422 | unsigned int sample_size = | |
423 | snd_pcm_format_width(params_format(hw_params)); | |
be41e941 | 424 | u32 wl; |
17467f23 | 425 | |
be41e941 | 426 | /* The SSI should always be disabled at this points (SSIEN=0) */ |
85ef2375 | 427 | wl = CCSR_SSI_SxCCR_WL(sample_size); |
17467f23 | 428 | |
be41e941 | 429 | /* In synchronous mode, the SSI uses STCCR for capture */ |
17467f23 | 430 | clrsetbits_be32(&ssi->stccr, CCSR_SSI_SxCCR_WL_MASK, wl); |
be41e941 | 431 | } |
17467f23 TT |
432 | |
433 | return 0; | |
434 | } | |
435 | ||
436 | /** | |
437 | * fsl_ssi_trigger: start and stop the DMA transfer. | |
438 | * | |
439 | * This function is called by ALSA to start, stop, pause, and resume the DMA | |
440 | * transfer of data. | |
441 | * | |
442 | * The DMA channel is in external master start and pause mode, which | |
443 | * means the SSI completely controls the flow of data. | |
444 | */ | |
dee89c4d MB |
445 | static int fsl_ssi_trigger(struct snd_pcm_substream *substream, int cmd, |
446 | struct snd_soc_dai *dai) | |
17467f23 TT |
447 | { |
448 | struct snd_soc_pcm_runtime *rtd = substream->private_data; | |
449 | struct fsl_ssi_private *ssi_private = rtd->dai->cpu_dai->private_data; | |
450 | struct ccsr_ssi __iomem *ssi = ssi_private->ssi; | |
451 | ||
452 | switch (cmd) { | |
453 | case SNDRV_PCM_TRIGGER_START: | |
454 | case SNDRV_PCM_TRIGGER_RESUME: | |
455 | case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: | |
456 | if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { | |
be41e941 TT |
457 | clrbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN); |
458 | setbits32(&ssi->scr, | |
459 | CCSR_SSI_SCR_SSIEN | CCSR_SSI_SCR_TE); | |
17467f23 | 460 | } else { |
be41e941 TT |
461 | clrbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN); |
462 | setbits32(&ssi->scr, | |
463 | CCSR_SSI_SCR_SSIEN | CCSR_SSI_SCR_RE); | |
17467f23 TT |
464 | |
465 | /* | |
466 | * I think we need this delay to allow time for the SSI | |
467 | * to put data into its FIFO. Without it, ALSA starts | |
468 | * to complain about overruns. | |
469 | */ | |
3a3bd960 | 470 | mdelay(1); |
17467f23 TT |
471 | } |
472 | break; | |
473 | ||
474 | case SNDRV_PCM_TRIGGER_STOP: | |
475 | case SNDRV_PCM_TRIGGER_SUSPEND: | |
476 | case SNDRV_PCM_TRIGGER_PAUSE_PUSH: | |
477 | if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) | |
478 | clrbits32(&ssi->scr, CCSR_SSI_SCR_TE); | |
479 | else | |
480 | clrbits32(&ssi->scr, CCSR_SSI_SCR_RE); | |
481 | break; | |
482 | ||
483 | default: | |
484 | return -EINVAL; | |
485 | } | |
486 | ||
487 | return 0; | |
488 | } | |
489 | ||
490 | /** | |
491 | * fsl_ssi_shutdown: shutdown the SSI | |
492 | * | |
493 | * Shutdown the SSI if there are no other substreams open. | |
494 | */ | |
dee89c4d MB |
495 | static void fsl_ssi_shutdown(struct snd_pcm_substream *substream, |
496 | struct snd_soc_dai *dai) | |
17467f23 TT |
497 | { |
498 | struct snd_soc_pcm_runtime *rtd = substream->private_data; | |
499 | struct fsl_ssi_private *ssi_private = rtd->dai->cpu_dai->private_data; | |
500 | ||
501 | if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) | |
502 | ssi_private->playback--; | |
503 | ||
504 | if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) | |
505 | ssi_private->capture--; | |
506 | ||
be41e941 TT |
507 | if (ssi_private->first_stream == substream) |
508 | ssi_private->first_stream = ssi_private->second_stream; | |
509 | ||
510 | ssi_private->second_stream = NULL; | |
511 | ||
17467f23 TT |
512 | /* |
513 | * If this is the last active substream, disable the SSI and release | |
514 | * the IRQ. | |
515 | */ | |
516 | if (!ssi_private->playback && !ssi_private->capture) { | |
517 | struct ccsr_ssi __iomem *ssi = ssi_private->ssi; | |
518 | ||
519 | clrbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN); | |
520 | ||
521 | free_irq(ssi_private->irq, ssi_private); | |
522 | } | |
523 | } | |
524 | ||
525 | /** | |
526 | * fsl_ssi_set_sysclk: set the clock frequency and direction | |
527 | * | |
528 | * This function is called by the machine driver to tell us what the clock | |
529 | * frequency and direction are. | |
530 | * | |
531 | * Currently, we only support operating as a clock slave (SND_SOC_CLOCK_IN), | |
532 | * and we don't care about the frequency. Return an error if the direction | |
533 | * is not SND_SOC_CLOCK_IN. | |
534 | * | |
535 | * @clk_id: reserved, should be zero | |
536 | * @freq: the frequency of the given clock ID, currently ignored | |
537 | * @dir: SND_SOC_CLOCK_IN (clock slave) or SND_SOC_CLOCK_OUT (clock master) | |
538 | */ | |
8cf7b2b3 | 539 | static int fsl_ssi_set_sysclk(struct snd_soc_dai *cpu_dai, |
17467f23 TT |
540 | int clk_id, unsigned int freq, int dir) |
541 | { | |
542 | ||
543 | return (dir == SND_SOC_CLOCK_IN) ? 0 : -EINVAL; | |
544 | } | |
545 | ||
546 | /** | |
547 | * fsl_ssi_set_fmt: set the serial format. | |
548 | * | |
549 | * This function is called by the machine driver to tell us what serial | |
550 | * format to use. | |
551 | * | |
552 | * Currently, we only support I2S mode. Return an error if the format is | |
553 | * not SND_SOC_DAIFMT_I2S. | |
554 | * | |
555 | * @format: one of SND_SOC_DAIFMT_xxx | |
556 | */ | |
8cf7b2b3 | 557 | static int fsl_ssi_set_fmt(struct snd_soc_dai *cpu_dai, unsigned int format) |
17467f23 TT |
558 | { |
559 | return (format == SND_SOC_DAIFMT_I2S) ? 0 : -EINVAL; | |
560 | } | |
561 | ||
562 | /** | |
563 | * fsl_ssi_dai_template: template CPU DAI for the SSI | |
564 | */ | |
8cf7b2b3 | 565 | static struct snd_soc_dai fsl_ssi_dai_template = { |
17467f23 TT |
566 | .playback = { |
567 | /* The SSI does not support monaural audio. */ | |
568 | .channels_min = 2, | |
569 | .channels_max = 2, | |
570 | .rates = FSLSSI_I2S_RATES, | |
571 | .formats = FSLSSI_I2S_FORMATS, | |
572 | }, | |
573 | .capture = { | |
574 | .channels_min = 2, | |
575 | .channels_max = 2, | |
576 | .rates = FSLSSI_I2S_RATES, | |
577 | .formats = FSLSSI_I2S_FORMATS, | |
578 | }, | |
579 | .ops = { | |
580 | .startup = fsl_ssi_startup, | |
85ef2375 | 581 | .hw_params = fsl_ssi_hw_params, |
17467f23 TT |
582 | .shutdown = fsl_ssi_shutdown, |
583 | .trigger = fsl_ssi_trigger, | |
17467f23 TT |
584 | .set_sysclk = fsl_ssi_set_sysclk, |
585 | .set_fmt = fsl_ssi_set_fmt, | |
586 | }, | |
587 | }; | |
588 | ||
589 | /** | |
590 | * fsl_sysfs_ssi_show: display SSI statistics | |
591 | * | |
592 | * Display the statistics for the current SSI device. | |
593 | */ | |
594 | static ssize_t fsl_sysfs_ssi_show(struct device *dev, | |
595 | struct device_attribute *attr, char *buf) | |
596 | { | |
597 | struct fsl_ssi_private *ssi_private = | |
598 | container_of(attr, struct fsl_ssi_private, dev_attr); | |
599 | ssize_t length; | |
600 | ||
601 | length = sprintf(buf, "rfrc=%u", ssi_private->stats.rfrc); | |
602 | length += sprintf(buf + length, "\ttfrc=%u", ssi_private->stats.tfrc); | |
603 | length += sprintf(buf + length, "\tcmdau=%u", ssi_private->stats.cmdau); | |
604 | length += sprintf(buf + length, "\tcmddu=%u", ssi_private->stats.cmddu); | |
605 | length += sprintf(buf + length, "\trxt=%u", ssi_private->stats.rxt); | |
606 | length += sprintf(buf + length, "\trdr1=%u", ssi_private->stats.rdr1); | |
607 | length += sprintf(buf + length, "\trdr0=%u", ssi_private->stats.rdr0); | |
608 | length += sprintf(buf + length, "\ttde1=%u", ssi_private->stats.tde1); | |
609 | length += sprintf(buf + length, "\ttde0=%u", ssi_private->stats.tde0); | |
610 | length += sprintf(buf + length, "\troe1=%u", ssi_private->stats.roe1); | |
611 | length += sprintf(buf + length, "\troe0=%u", ssi_private->stats.roe0); | |
612 | length += sprintf(buf + length, "\ttue1=%u", ssi_private->stats.tue1); | |
613 | length += sprintf(buf + length, "\ttue0=%u", ssi_private->stats.tue0); | |
614 | length += sprintf(buf + length, "\ttfs=%u", ssi_private->stats.tfs); | |
615 | length += sprintf(buf + length, "\trfs=%u", ssi_private->stats.rfs); | |
616 | length += sprintf(buf + length, "\ttls=%u", ssi_private->stats.tls); | |
617 | length += sprintf(buf + length, "\trls=%u", ssi_private->stats.rls); | |
618 | length += sprintf(buf + length, "\trff1=%u", ssi_private->stats.rff1); | |
619 | length += sprintf(buf + length, "\trff0=%u", ssi_private->stats.rff0); | |
620 | length += sprintf(buf + length, "\ttfe1=%u", ssi_private->stats.tfe1); | |
621 | length += sprintf(buf + length, "\ttfe0=%u\n", ssi_private->stats.tfe0); | |
622 | ||
623 | return length; | |
624 | } | |
625 | ||
626 | /** | |
8cf7b2b3 | 627 | * fsl_ssi_create_dai: create a snd_soc_dai structure |
17467f23 | 628 | * |
8cf7b2b3 | 629 | * This function is called by the machine driver to create a snd_soc_dai |
17467f23 | 630 | * structure. The function creates an ssi_private object, which contains |
8cf7b2b3 | 631 | * the snd_soc_dai. It also creates the sysfs statistics device. |
17467f23 | 632 | */ |
8cf7b2b3 | 633 | struct snd_soc_dai *fsl_ssi_create_dai(struct fsl_ssi_info *ssi_info) |
17467f23 | 634 | { |
8cf7b2b3 | 635 | struct snd_soc_dai *fsl_ssi_dai; |
17467f23 TT |
636 | struct fsl_ssi_private *ssi_private; |
637 | int ret = 0; | |
638 | struct device_attribute *dev_attr; | |
639 | ||
640 | ssi_private = kzalloc(sizeof(struct fsl_ssi_private), GFP_KERNEL); | |
641 | if (!ssi_private) { | |
642 | dev_err(ssi_info->dev, "could not allocate DAI object\n"); | |
643 | return NULL; | |
644 | } | |
645 | memcpy(&ssi_private->cpu_dai, &fsl_ssi_dai_template, | |
8cf7b2b3 | 646 | sizeof(struct snd_soc_dai)); |
17467f23 TT |
647 | |
648 | fsl_ssi_dai = &ssi_private->cpu_dai; | |
649 | dev_attr = &ssi_private->dev_attr; | |
650 | ||
651 | sprintf(ssi_private->name, "ssi%u", (u8) ssi_info->id); | |
652 | ssi_private->ssi = ssi_info->ssi; | |
653 | ssi_private->ssi_phys = ssi_info->ssi_phys; | |
654 | ssi_private->irq = ssi_info->irq; | |
655 | ssi_private->dev = ssi_info->dev; | |
656 | ||
657 | ssi_private->dev->driver_data = fsl_ssi_dai; | |
658 | ||
659 | /* Initialize the the device_attribute structure */ | |
660 | dev_attr->attr.name = "ssi-stats"; | |
661 | dev_attr->attr.mode = S_IRUGO; | |
662 | dev_attr->show = fsl_sysfs_ssi_show; | |
663 | ||
664 | ret = device_create_file(ssi_private->dev, dev_attr); | |
665 | if (ret) { | |
666 | dev_err(ssi_info->dev, "could not create sysfs %s file\n", | |
667 | ssi_private->dev_attr.attr.name); | |
668 | kfree(fsl_ssi_dai); | |
669 | return NULL; | |
670 | } | |
671 | ||
672 | fsl_ssi_dai->private_data = ssi_private; | |
673 | fsl_ssi_dai->name = ssi_private->name; | |
674 | fsl_ssi_dai->id = ssi_info->id; | |
3f4b783c MB |
675 | fsl_ssi_dai->dev = ssi_info->dev; |
676 | ||
677 | ret = snd_soc_register_dai(fsl_ssi_dai); | |
678 | if (ret != 0) { | |
679 | dev_err(ssi_info->dev, "failed to register DAI: %d\n", ret); | |
680 | kfree(fsl_ssi_dai); | |
681 | return NULL; | |
682 | } | |
17467f23 TT |
683 | |
684 | return fsl_ssi_dai; | |
685 | } | |
686 | EXPORT_SYMBOL_GPL(fsl_ssi_create_dai); | |
687 | ||
688 | /** | |
8cf7b2b3 | 689 | * fsl_ssi_destroy_dai: destroy the snd_soc_dai object |
17467f23 TT |
690 | * |
691 | * This function undoes the operations of fsl_ssi_create_dai() | |
692 | */ | |
8cf7b2b3 | 693 | void fsl_ssi_destroy_dai(struct snd_soc_dai *fsl_ssi_dai) |
17467f23 TT |
694 | { |
695 | struct fsl_ssi_private *ssi_private = | |
696 | container_of(fsl_ssi_dai, struct fsl_ssi_private, cpu_dai); | |
697 | ||
698 | device_remove_file(ssi_private->dev, &ssi_private->dev_attr); | |
699 | ||
3f4b783c MB |
700 | snd_soc_unregister_dai(&ssi_private->cpu_dai); |
701 | ||
17467f23 TT |
702 | kfree(ssi_private); |
703 | } | |
704 | EXPORT_SYMBOL_GPL(fsl_ssi_destroy_dai); | |
705 | ||
706 | MODULE_AUTHOR("Timur Tabi <timur@freescale.com>"); | |
707 | MODULE_DESCRIPTION("Freescale Synchronous Serial Interface (SSI) ASoC Driver"); | |
708 | MODULE_LICENSE("GPL"); |