]>
Commit | Line | Data |
---|---|---|
e5779998 DM |
1 | /* |
2 | * This program is free software; you can redistribute it and/or modify | |
3 | * it under the terms of the GNU General Public License as published by | |
4 | * the Free Software Foundation; either version 2 of the License, or | |
5 | * (at your option) any later version. | |
6 | * | |
7 | * This program is distributed in the hope that it will be useful, | |
8 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
9 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
10 | * GNU General Public License for more details. | |
11 | * | |
12 | * You should have received a copy of the GNU General Public License | |
13 | * along with this program; if not, write to the Free Software | |
14 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
15 | * | |
16 | */ | |
17 | ||
c731bc96 DM |
18 | #include <linux/gfp.h> |
19 | #include <linux/init.h> | |
80c8a2a3 | 20 | #include <linux/ratelimit.h> |
c731bc96 DM |
21 | #include <linux/usb.h> |
22 | #include <linux/usb/audio.h> | |
8fdff6a3 | 23 | #include <linux/slab.h> |
c731bc96 DM |
24 | |
25 | #include <sound/core.h> | |
26 | #include <sound/pcm.h> | |
8fdff6a3 | 27 | #include <sound/pcm_params.h> |
c731bc96 DM |
28 | |
29 | #include "usbaudio.h" | |
30 | #include "helper.h" | |
31 | #include "card.h" | |
32 | #include "endpoint.h" | |
33 | #include "pcm.h" | |
2b58fd5b | 34 | #include "quirks.h" |
c731bc96 | 35 | |
8fdff6a3 | 36 | #define EP_FLAG_RUNNING 1 |
f58161ba | 37 | #define EP_FLAG_STOPPING 2 |
8fdff6a3 | 38 | |
94c27215 DM |
39 | /* |
40 | * snd_usb_endpoint is a model that abstracts everything related to an | |
41 | * USB endpoint and its streaming. | |
42 | * | |
43 | * There are functions to activate and deactivate the streaming URBs and | |
07a5e9d4 | 44 | * optional callbacks to let the pcm logic handle the actual content of the |
94c27215 DM |
45 | * packets for playback and record. Thus, the bus streaming and the audio |
46 | * handlers are fully decoupled. | |
47 | * | |
07a5e9d4 | 48 | * There are two different types of endpoints in audio applications. |
94c27215 DM |
49 | * |
50 | * SND_USB_ENDPOINT_TYPE_DATA handles full audio data payload for both | |
51 | * inbound and outbound traffic. | |
52 | * | |
07a5e9d4 DM |
53 | * SND_USB_ENDPOINT_TYPE_SYNC endpoints are for inbound traffic only and |
54 | * expect the payload to carry Q10.14 / Q16.16 formatted sync information | |
55 | * (3 or 4 bytes). | |
94c27215 | 56 | * |
07a5e9d4 DM |
57 | * Each endpoint has to be configured prior to being used by calling |
58 | * snd_usb_endpoint_set_params(). | |
94c27215 DM |
59 | * |
60 | * The model incorporates a reference counting, so that multiple users | |
61 | * can call snd_usb_endpoint_start() and snd_usb_endpoint_stop(), and | |
62 | * only the first user will effectively start the URBs, and only the last | |
07a5e9d4 | 63 | * one to stop it will tear the URBs down again. |
94c27215 DM |
64 | */ |
65 | ||
c731bc96 DM |
66 | /* |
67 | * convert a sampling rate into our full speed format (fs/1000 in Q16.16) | |
68 | * this will overflow at approx 524 kHz | |
69 | */ | |
70 | static inline unsigned get_usb_full_speed_rate(unsigned int rate) | |
71 | { | |
72 | return ((rate << 13) + 62) / 125; | |
73 | } | |
74 | ||
75 | /* | |
76 | * convert a sampling rate into USB high speed format (fs/8000 in Q16.16) | |
77 | * this will overflow at approx 4 MHz | |
78 | */ | |
79 | static inline unsigned get_usb_high_speed_rate(unsigned int rate) | |
80 | { | |
81 | return ((rate << 10) + 62) / 125; | |
82 | } | |
83 | ||
c731bc96 DM |
84 | /* |
85 | * release a urb data | |
86 | */ | |
87 | static void release_urb_ctx(struct snd_urb_ctx *u) | |
88 | { | |
d399ff95 DM |
89 | if (u->buffer_size) |
90 | usb_free_coherent(u->ep->chip->dev, u->buffer_size, | |
91 | u->urb->transfer_buffer, | |
92 | u->urb->transfer_dma); | |
93 | usb_free_urb(u->urb); | |
94 | u->urb = NULL; | |
c731bc96 DM |
95 | } |
96 | ||
97 | static const char *usb_error_string(int err) | |
98 | { | |
99 | switch (err) { | |
100 | case -ENODEV: | |
101 | return "no device"; | |
102 | case -ENOENT: | |
103 | return "endpoint not enabled"; | |
104 | case -EPIPE: | |
105 | return "endpoint stalled"; | |
106 | case -ENOSPC: | |
107 | return "not enough bandwidth"; | |
108 | case -ESHUTDOWN: | |
109 | return "device disabled"; | |
110 | case -EHOSTUNREACH: | |
111 | return "device suspended"; | |
112 | case -EINVAL: | |
113 | case -EAGAIN: | |
114 | case -EFBIG: | |
115 | case -EMSGSIZE: | |
116 | return "internal error"; | |
117 | default: | |
118 | return "unknown error"; | |
119 | } | |
120 | } | |
121 | ||
94c27215 DM |
122 | /** |
123 | * snd_usb_endpoint_implicit_feedback_sink: Report endpoint usage type | |
124 | * | |
07a5e9d4 | 125 | * @ep: The snd_usb_endpoint |
94c27215 DM |
126 | * |
127 | * Determine whether an endpoint is driven by an implicit feedback | |
128 | * data endpoint source. | |
129 | */ | |
98ae472b | 130 | int snd_usb_endpoint_implicit_feedback_sink(struct snd_usb_endpoint *ep) |
8fdff6a3 DM |
131 | { |
132 | return ep->sync_master && | |
133 | ep->sync_master->type == SND_USB_ENDPOINT_TYPE_DATA && | |
134 | ep->type == SND_USB_ENDPOINT_TYPE_DATA && | |
135 | usb_pipeout(ep->pipe); | |
136 | } | |
137 | ||
94c27215 DM |
138 | /* |
139 | * For streaming based on information derived from sync endpoints, | |
140 | * prepare_outbound_urb_sizes() will call next_packet_size() to | |
141 | * determine the number of samples to be sent in the next packet. | |
142 | * | |
143 | * For implicit feedback, next_packet_size() is unused. | |
144 | */ | |
245baf98 | 145 | int snd_usb_endpoint_next_packet_size(struct snd_usb_endpoint *ep) |
8fdff6a3 DM |
146 | { |
147 | unsigned long flags; | |
148 | int ret; | |
149 | ||
150 | if (ep->fill_max) | |
151 | return ep->maxframesize; | |
152 | ||
153 | spin_lock_irqsave(&ep->lock, flags); | |
154 | ep->phase = (ep->phase & 0xffff) | |
155 | + (ep->freqm << ep->datainterval); | |
156 | ret = min(ep->phase >> 16, ep->maxframesize); | |
157 | spin_unlock_irqrestore(&ep->lock, flags); | |
158 | ||
159 | return ret; | |
160 | } | |
161 | ||
162 | static void retire_outbound_urb(struct snd_usb_endpoint *ep, | |
163 | struct snd_urb_ctx *urb_ctx) | |
164 | { | |
165 | if (ep->retire_data_urb) | |
166 | ep->retire_data_urb(ep->data_subs, urb_ctx->urb); | |
167 | } | |
168 | ||
169 | static void retire_inbound_urb(struct snd_usb_endpoint *ep, | |
170 | struct snd_urb_ctx *urb_ctx) | |
171 | { | |
172 | struct urb *urb = urb_ctx->urb; | |
173 | ||
2b58fd5b DM |
174 | if (unlikely(ep->skip_packets > 0)) { |
175 | ep->skip_packets--; | |
176 | return; | |
177 | } | |
178 | ||
8fdff6a3 DM |
179 | if (ep->sync_slave) |
180 | snd_usb_handle_sync_urb(ep->sync_slave, ep, urb); | |
181 | ||
182 | if (ep->retire_data_urb) | |
183 | ep->retire_data_urb(ep->data_subs, urb); | |
184 | } | |
185 | ||
5cf310e9 RW |
186 | static void prepare_silent_urb(struct snd_usb_endpoint *ep, |
187 | struct snd_urb_ctx *ctx) | |
188 | { | |
189 | struct urb *urb = ctx->urb; | |
190 | unsigned int offs = 0; | |
e0570446 RW |
191 | unsigned int extra = 0; |
192 | __le32 packet_length; | |
5cf310e9 RW |
193 | int i; |
194 | ||
e0570446 RW |
195 | /* For tx_length_quirk, put packet length at start of packet */ |
196 | if (ep->chip->tx_length_quirk) | |
197 | extra = sizeof(packet_length); | |
198 | ||
5cf310e9 | 199 | for (i = 0; i < ctx->packets; ++i) { |
e0570446 RW |
200 | unsigned int offset; |
201 | unsigned int length; | |
5cf310e9 RW |
202 | int counts; |
203 | ||
204 | if (ctx->packet_size[i]) | |
205 | counts = ctx->packet_size[i]; | |
206 | else | |
207 | counts = snd_usb_endpoint_next_packet_size(ep); | |
208 | ||
e0570446 RW |
209 | length = counts * ep->stride; /* number of silent bytes */ |
210 | offset = offs * ep->stride + extra * i; | |
211 | urb->iso_frame_desc[i].offset = offset; | |
212 | urb->iso_frame_desc[i].length = length + extra; | |
213 | if (extra) { | |
214 | packet_length = cpu_to_le32(length); | |
215 | memcpy(urb->transfer_buffer + offset, | |
216 | &packet_length, sizeof(packet_length)); | |
217 | } | |
218 | memset(urb->transfer_buffer + offset + extra, | |
219 | ep->silence_value, length); | |
5cf310e9 RW |
220 | offs += counts; |
221 | } | |
222 | ||
223 | urb->number_of_packets = ctx->packets; | |
e0570446 | 224 | urb->transfer_buffer_length = offs * ep->stride + ctx->packets * extra; |
5cf310e9 RW |
225 | } |
226 | ||
8fdff6a3 DM |
227 | /* |
228 | * Prepare a PLAYBACK urb for submission to the bus. | |
229 | */ | |
230 | static void prepare_outbound_urb(struct snd_usb_endpoint *ep, | |
231 | struct snd_urb_ctx *ctx) | |
232 | { | |
8fdff6a3 DM |
233 | struct urb *urb = ctx->urb; |
234 | unsigned char *cp = urb->transfer_buffer; | |
235 | ||
236 | urb->dev = ep->chip->dev; /* we need to set this at each time */ | |
237 | ||
238 | switch (ep->type) { | |
239 | case SND_USB_ENDPOINT_TYPE_DATA: | |
240 | if (ep->prepare_data_urb) { | |
241 | ep->prepare_data_urb(ep->data_subs, urb); | |
242 | } else { | |
243 | /* no data provider, so send silence */ | |
5cf310e9 | 244 | prepare_silent_urb(ep, ctx); |
8fdff6a3 DM |
245 | } |
246 | break; | |
247 | ||
248 | case SND_USB_ENDPOINT_TYPE_SYNC: | |
249 | if (snd_usb_get_speed(ep->chip->dev) >= USB_SPEED_HIGH) { | |
250 | /* | |
251 | * fill the length and offset of each urb descriptor. | |
252 | * the fixed 12.13 frequency is passed as 16.16 through the pipe. | |
253 | */ | |
254 | urb->iso_frame_desc[0].length = 4; | |
255 | urb->iso_frame_desc[0].offset = 0; | |
256 | cp[0] = ep->freqn; | |
257 | cp[1] = ep->freqn >> 8; | |
258 | cp[2] = ep->freqn >> 16; | |
259 | cp[3] = ep->freqn >> 24; | |
260 | } else { | |
261 | /* | |
262 | * fill the length and offset of each urb descriptor. | |
263 | * the fixed 10.14 frequency is passed through the pipe. | |
264 | */ | |
265 | urb->iso_frame_desc[0].length = 3; | |
266 | urb->iso_frame_desc[0].offset = 0; | |
267 | cp[0] = ep->freqn >> 2; | |
268 | cp[1] = ep->freqn >> 10; | |
269 | cp[2] = ep->freqn >> 18; | |
270 | } | |
271 | ||
272 | break; | |
273 | } | |
274 | } | |
275 | ||
276 | /* | |
277 | * Prepare a CAPTURE or SYNC urb for submission to the bus. | |
278 | */ | |
279 | static inline void prepare_inbound_urb(struct snd_usb_endpoint *ep, | |
280 | struct snd_urb_ctx *urb_ctx) | |
281 | { | |
282 | int i, offs; | |
283 | struct urb *urb = urb_ctx->urb; | |
284 | ||
285 | urb->dev = ep->chip->dev; /* we need to set this at each time */ | |
286 | ||
287 | switch (ep->type) { | |
288 | case SND_USB_ENDPOINT_TYPE_DATA: | |
289 | offs = 0; | |
290 | for (i = 0; i < urb_ctx->packets; i++) { | |
291 | urb->iso_frame_desc[i].offset = offs; | |
292 | urb->iso_frame_desc[i].length = ep->curpacksize; | |
293 | offs += ep->curpacksize; | |
294 | } | |
295 | ||
296 | urb->transfer_buffer_length = offs; | |
297 | urb->number_of_packets = urb_ctx->packets; | |
298 | break; | |
299 | ||
300 | case SND_USB_ENDPOINT_TYPE_SYNC: | |
301 | urb->iso_frame_desc[0].length = min(4u, ep->syncmaxsize); | |
302 | urb->iso_frame_desc[0].offset = 0; | |
303 | break; | |
304 | } | |
305 | } | |
306 | ||
94c27215 | 307 | /* |
07a5e9d4 | 308 | * Send output urbs that have been prepared previously. URBs are dequeued |
94c27215 DM |
309 | * from ep->ready_playback_urbs and in case there there aren't any available |
310 | * or there are no packets that have been prepared, this function does | |
311 | * nothing. | |
312 | * | |
07a5e9d4 DM |
313 | * The reason why the functionality of sending and preparing URBs is separated |
314 | * is that host controllers don't guarantee the order in which they return | |
315 | * inbound and outbound packets to their submitters. | |
94c27215 DM |
316 | * |
317 | * This function is only used for implicit feedback endpoints. For endpoints | |
07a5e9d4 DM |
318 | * driven by dedicated sync endpoints, URBs are immediately re-submitted |
319 | * from their completion handler. | |
94c27215 | 320 | */ |
8fdff6a3 DM |
321 | static void queue_pending_output_urbs(struct snd_usb_endpoint *ep) |
322 | { | |
323 | while (test_bit(EP_FLAG_RUNNING, &ep->flags)) { | |
324 | ||
325 | unsigned long flags; | |
68853fa3 | 326 | struct snd_usb_packet_info *uninitialized_var(packet); |
8fdff6a3 DM |
327 | struct snd_urb_ctx *ctx = NULL; |
328 | struct urb *urb; | |
329 | int err, i; | |
330 | ||
331 | spin_lock_irqsave(&ep->lock, flags); | |
332 | if (ep->next_packet_read_pos != ep->next_packet_write_pos) { | |
333 | packet = ep->next_packet + ep->next_packet_read_pos; | |
334 | ep->next_packet_read_pos++; | |
335 | ep->next_packet_read_pos %= MAX_URBS; | |
336 | ||
337 | /* take URB out of FIFO */ | |
338 | if (!list_empty(&ep->ready_playback_urbs)) | |
339 | ctx = list_first_entry(&ep->ready_playback_urbs, | |
340 | struct snd_urb_ctx, ready_list); | |
341 | } | |
342 | spin_unlock_irqrestore(&ep->lock, flags); | |
343 | ||
344 | if (ctx == NULL) | |
345 | return; | |
346 | ||
347 | list_del_init(&ctx->ready_list); | |
348 | urb = ctx->urb; | |
349 | ||
350 | /* copy over the length information */ | |
351 | for (i = 0; i < packet->packets; i++) | |
352 | ctx->packet_size[i] = packet->packet_size[i]; | |
353 | ||
94c27215 | 354 | /* call the data handler to fill in playback data */ |
8fdff6a3 DM |
355 | prepare_outbound_urb(ep, ctx); |
356 | ||
357 | err = usb_submit_urb(ctx->urb, GFP_ATOMIC); | |
358 | if (err < 0) | |
0ba41d91 TI |
359 | usb_audio_err(ep->chip, |
360 | "Unable to submit urb #%d: %d (urb %p)\n", | |
361 | ctx->index, err, ctx->urb); | |
8fdff6a3 DM |
362 | else |
363 | set_bit(ctx->index, &ep->active_mask); | |
364 | } | |
365 | } | |
366 | ||
367 | /* | |
368 | * complete callback for urbs | |
369 | */ | |
370 | static void snd_complete_urb(struct urb *urb) | |
371 | { | |
372 | struct snd_urb_ctx *ctx = urb->context; | |
373 | struct snd_usb_endpoint *ep = ctx->ep; | |
67e22500 TI |
374 | struct snd_pcm_substream *substream; |
375 | unsigned long flags; | |
8fdff6a3 DM |
376 | int err; |
377 | ||
378 | if (unlikely(urb->status == -ENOENT || /* unlinked */ | |
379 | urb->status == -ENODEV || /* device removed */ | |
380 | urb->status == -ECONNRESET || /* unlinked */ | |
47ab1545 TI |
381 | urb->status == -ESHUTDOWN)) /* device disabled */ |
382 | goto exit_clear; | |
383 | /* device disconnected */ | |
384 | if (unlikely(atomic_read(&ep->chip->shutdown))) | |
8fdff6a3 DM |
385 | goto exit_clear; |
386 | ||
13a6c832 IAR |
387 | if (unlikely(!test_bit(EP_FLAG_RUNNING, &ep->flags))) |
388 | goto exit_clear; | |
389 | ||
8fdff6a3 DM |
390 | if (usb_pipeout(ep->pipe)) { |
391 | retire_outbound_urb(ep, ctx); | |
392 | /* can be stopped during retire callback */ | |
393 | if (unlikely(!test_bit(EP_FLAG_RUNNING, &ep->flags))) | |
394 | goto exit_clear; | |
395 | ||
98ae472b | 396 | if (snd_usb_endpoint_implicit_feedback_sink(ep)) { |
8fdff6a3 DM |
397 | spin_lock_irqsave(&ep->lock, flags); |
398 | list_add_tail(&ctx->ready_list, &ep->ready_playback_urbs); | |
399 | spin_unlock_irqrestore(&ep->lock, flags); | |
400 | queue_pending_output_urbs(ep); | |
401 | ||
402 | goto exit_clear; | |
403 | } | |
404 | ||
8fdff6a3 | 405 | prepare_outbound_urb(ep, ctx); |
86fad775 HL |
406 | /* can be stopped during prepare callback */ |
407 | if (unlikely(!test_bit(EP_FLAG_RUNNING, &ep->flags))) | |
408 | goto exit_clear; | |
8fdff6a3 DM |
409 | } else { |
410 | retire_inbound_urb(ep, ctx); | |
411 | /* can be stopped during retire callback */ | |
412 | if (unlikely(!test_bit(EP_FLAG_RUNNING, &ep->flags))) | |
413 | goto exit_clear; | |
414 | ||
415 | prepare_inbound_urb(ep, ctx); | |
416 | } | |
417 | ||
418 | err = usb_submit_urb(urb, GFP_ATOMIC); | |
419 | if (err == 0) | |
420 | return; | |
421 | ||
0ba41d91 | 422 | usb_audio_err(ep->chip, "cannot submit urb (err = %d)\n", err); |
67e22500 TI |
423 | if (ep->data_subs && ep->data_subs->pcm_substream) { |
424 | substream = ep->data_subs->pcm_substream; | |
1fb8510c | 425 | snd_pcm_stop_xrun(substream); |
67e22500 | 426 | } |
8fdff6a3 DM |
427 | |
428 | exit_clear: | |
429 | clear_bit(ctx->index, &ep->active_mask); | |
430 | } | |
431 | ||
94c27215 | 432 | /** |
07a5e9d4 | 433 | * snd_usb_add_endpoint: Add an endpoint to an USB audio chip |
94c27215 DM |
434 | * |
435 | * @chip: The chip | |
436 | * @alts: The USB host interface | |
437 | * @ep_num: The number of the endpoint to use | |
438 | * @direction: SNDRV_PCM_STREAM_PLAYBACK or SNDRV_PCM_STREAM_CAPTURE | |
439 | * @type: SND_USB_ENDPOINT_TYPE_DATA or SND_USB_ENDPOINT_TYPE_SYNC | |
440 | * | |
441 | * If the requested endpoint has not been added to the given chip before, | |
442 | * a new instance is created. Otherwise, a pointer to the previoulsy | |
443 | * created instance is returned. In case of any error, NULL is returned. | |
444 | * | |
445 | * New endpoints will be added to chip->ep_list and must be freed by | |
446 | * calling snd_usb_endpoint_free(). | |
447d6275 TI |
447 | * |
448 | * For SND_USB_ENDPOINT_TYPE_SYNC, the caller needs to guarantee that | |
449 | * bNumEndpoints > 1 beforehand. | |
94c27215 | 450 | */ |
8fdff6a3 DM |
451 | struct snd_usb_endpoint *snd_usb_add_endpoint(struct snd_usb_audio *chip, |
452 | struct usb_host_interface *alts, | |
453 | int ep_num, int direction, int type) | |
454 | { | |
8fdff6a3 | 455 | struct snd_usb_endpoint *ep; |
68e67f40 | 456 | int is_playback = direction == SNDRV_PCM_STREAM_PLAYBACK; |
8fdff6a3 | 457 | |
e7e58df8 EZ |
458 | if (WARN_ON(!alts)) |
459 | return NULL; | |
460 | ||
8fdff6a3 DM |
461 | mutex_lock(&chip->mutex); |
462 | ||
88766f04 | 463 | list_for_each_entry(ep, &chip->ep_list, list) { |
8fdff6a3 DM |
464 | if (ep->ep_num == ep_num && |
465 | ep->iface == alts->desc.bInterfaceNumber && | |
df23a246 | 466 | ep->altsetting == alts->desc.bAlternateSetting) { |
0ba41d91 TI |
467 | usb_audio_dbg(ep->chip, |
468 | "Re-using EP %x in iface %d,%d @%p\n", | |
df23a246 | 469 | ep_num, ep->iface, ep->altsetting, ep); |
8fdff6a3 DM |
470 | goto __exit_unlock; |
471 | } | |
472 | } | |
473 | ||
0ba41d91 | 474 | usb_audio_dbg(chip, "Creating new %s %s endpoint #%x\n", |
8fdff6a3 DM |
475 | is_playback ? "playback" : "capture", |
476 | type == SND_USB_ENDPOINT_TYPE_DATA ? "data" : "sync", | |
477 | ep_num); | |
478 | ||
8fdff6a3 DM |
479 | ep = kzalloc(sizeof(*ep), GFP_KERNEL); |
480 | if (!ep) | |
481 | goto __exit_unlock; | |
482 | ||
483 | ep->chip = chip; | |
484 | spin_lock_init(&ep->lock); | |
485 | ep->type = type; | |
486 | ep->ep_num = ep_num; | |
487 | ep->iface = alts->desc.bInterfaceNumber; | |
df23a246 | 488 | ep->altsetting = alts->desc.bAlternateSetting; |
8fdff6a3 DM |
489 | INIT_LIST_HEAD(&ep->ready_playback_urbs); |
490 | ep_num &= USB_ENDPOINT_NUMBER_MASK; | |
491 | ||
492 | if (is_playback) | |
493 | ep->pipe = usb_sndisocpipe(chip->dev, ep_num); | |
494 | else | |
495 | ep->pipe = usb_rcvisocpipe(chip->dev, ep_num); | |
496 | ||
497 | if (type == SND_USB_ENDPOINT_TYPE_SYNC) { | |
498 | if (get_endpoint(alts, 1)->bLength >= USB_DT_ENDPOINT_AUDIO_SIZE && | |
499 | get_endpoint(alts, 1)->bRefresh >= 1 && | |
500 | get_endpoint(alts, 1)->bRefresh <= 9) | |
501 | ep->syncinterval = get_endpoint(alts, 1)->bRefresh; | |
502 | else if (snd_usb_get_speed(chip->dev) == USB_SPEED_FULL) | |
503 | ep->syncinterval = 1; | |
504 | else if (get_endpoint(alts, 1)->bInterval >= 1 && | |
505 | get_endpoint(alts, 1)->bInterval <= 16) | |
506 | ep->syncinterval = get_endpoint(alts, 1)->bInterval - 1; | |
507 | else | |
508 | ep->syncinterval = 3; | |
509 | ||
510 | ep->syncmaxsize = le16_to_cpu(get_endpoint(alts, 1)->wMaxPacketSize); | |
511 | } | |
512 | ||
513 | list_add_tail(&ep->list, &chip->ep_list); | |
514 | ||
515 | __exit_unlock: | |
516 | mutex_unlock(&chip->mutex); | |
517 | ||
518 | return ep; | |
519 | } | |
520 | ||
521 | /* | |
522 | * wait until all urbs are processed. | |
523 | */ | |
524 | static int wait_clear_urbs(struct snd_usb_endpoint *ep) | |
525 | { | |
526 | unsigned long end_time = jiffies + msecs_to_jiffies(1000); | |
8fdff6a3 DM |
527 | int alive; |
528 | ||
529 | do { | |
190006f9 | 530 | alive = bitmap_weight(&ep->active_mask, ep->nurbs); |
8fdff6a3 DM |
531 | if (!alive) |
532 | break; | |
533 | ||
534 | schedule_timeout_uninterruptible(1); | |
535 | } while (time_before(jiffies, end_time)); | |
536 | ||
537 | if (alive) | |
0ba41d91 TI |
538 | usb_audio_err(ep->chip, |
539 | "timeout: still %d active urbs on EP #%x\n", | |
540 | alive, ep->ep_num); | |
f58161ba | 541 | clear_bit(EP_FLAG_STOPPING, &ep->flags); |
8fdff6a3 | 542 | |
1d0f9530 IAR |
543 | ep->data_subs = NULL; |
544 | ep->sync_slave = NULL; | |
545 | ep->retire_data_urb = NULL; | |
546 | ep->prepare_data_urb = NULL; | |
547 | ||
8fdff6a3 DM |
548 | return 0; |
549 | } | |
550 | ||
f58161ba TI |
551 | /* sync the pending stop operation; |
552 | * this function itself doesn't trigger the stop operation | |
553 | */ | |
554 | void snd_usb_endpoint_sync_pending_stop(struct snd_usb_endpoint *ep) | |
555 | { | |
556 | if (ep && test_bit(EP_FLAG_STOPPING, &ep->flags)) | |
557 | wait_clear_urbs(ep); | |
558 | } | |
559 | ||
8fdff6a3 DM |
560 | /* |
561 | * unlink active urbs. | |
562 | */ | |
ccc1696d | 563 | static int deactivate_urbs(struct snd_usb_endpoint *ep, bool force) |
8fdff6a3 | 564 | { |
8fdff6a3 | 565 | unsigned int i; |
8fdff6a3 | 566 | |
47ab1545 | 567 | if (!force && atomic_read(&ep->chip->shutdown)) /* to be sure... */ |
8fdff6a3 DM |
568 | return -EBADFD; |
569 | ||
8fdff6a3 DM |
570 | clear_bit(EP_FLAG_RUNNING, &ep->flags); |
571 | ||
572 | INIT_LIST_HEAD(&ep->ready_playback_urbs); | |
573 | ep->next_packet_read_pos = 0; | |
574 | ep->next_packet_write_pos = 0; | |
575 | ||
8fdff6a3 DM |
576 | for (i = 0; i < ep->nurbs; i++) { |
577 | if (test_bit(i, &ep->active_mask)) { | |
578 | if (!test_and_set_bit(i, &ep->unlink_mask)) { | |
579 | struct urb *u = ep->urb[i].urb; | |
ccc1696d | 580 | usb_unlink_urb(u); |
8fdff6a3 DM |
581 | } |
582 | } | |
583 | } | |
584 | ||
585 | return 0; | |
586 | } | |
587 | ||
588 | /* | |
589 | * release an endpoint's urbs | |
590 | */ | |
591 | static void release_urbs(struct snd_usb_endpoint *ep, int force) | |
592 | { | |
593 | int i; | |
594 | ||
595 | /* route incoming urbs to nirvana */ | |
596 | ep->retire_data_urb = NULL; | |
597 | ep->prepare_data_urb = NULL; | |
598 | ||
599 | /* stop urbs */ | |
ccc1696d | 600 | deactivate_urbs(ep, force); |
8fdff6a3 DM |
601 | wait_clear_urbs(ep); |
602 | ||
603 | for (i = 0; i < ep->nurbs; i++) | |
604 | release_urb_ctx(&ep->urb[i]); | |
605 | ||
606 | if (ep->syncbuf) | |
607 | usb_free_coherent(ep->chip->dev, SYNC_URBS * 4, | |
608 | ep->syncbuf, ep->sync_dma); | |
609 | ||
610 | ep->syncbuf = NULL; | |
611 | ep->nurbs = 0; | |
612 | } | |
613 | ||
94c27215 DM |
614 | /* |
615 | * configure a data endpoint | |
616 | */ | |
8fdff6a3 | 617 | static int data_ep_set_params(struct snd_usb_endpoint *ep, |
35ec7aa2 DR |
618 | snd_pcm_format_t pcm_format, |
619 | unsigned int channels, | |
620 | unsigned int period_bytes, | |
976b6c06 AS |
621 | unsigned int frames_per_period, |
622 | unsigned int periods_per_buffer, | |
8fdff6a3 DM |
623 | struct audioformat *fmt, |
624 | struct snd_usb_endpoint *sync_ep) | |
625 | { | |
976b6c06 AS |
626 | unsigned int maxsize, minsize, packs_per_ms, max_packs_per_urb; |
627 | unsigned int max_packs_per_period, urbs_per_period, urb_packs; | |
628 | unsigned int max_urbs, i; | |
35ec7aa2 | 629 | int frame_bits = snd_pcm_format_physical_width(pcm_format) * channels; |
759c90fe RW |
630 | int tx_length_quirk = (ep->chip->tx_length_quirk && |
631 | usb_pipeout(ep->pipe)); | |
8fdff6a3 | 632 | |
d24f5061 DM |
633 | if (pcm_format == SNDRV_PCM_FORMAT_DSD_U16_LE && fmt->dsd_dop) { |
634 | /* | |
635 | * When operating in DSD DOP mode, the size of a sample frame | |
636 | * in hardware differs from the actual physical format width | |
637 | * because we need to make room for the DOP markers. | |
638 | */ | |
639 | frame_bits += channels << 3; | |
640 | } | |
641 | ||
8fdff6a3 DM |
642 | ep->datainterval = fmt->datainterval; |
643 | ep->stride = frame_bits >> 3; | |
01200730 NO |
644 | |
645 | switch (pcm_format) { | |
646 | case SNDRV_PCM_FORMAT_U8: | |
647 | ep->silence_value = 0x80; | |
648 | break; | |
649 | case SNDRV_PCM_FORMAT_DSD_U8: | |
650 | case SNDRV_PCM_FORMAT_DSD_U16_LE: | |
651 | case SNDRV_PCM_FORMAT_DSD_U32_LE: | |
652 | case SNDRV_PCM_FORMAT_DSD_U16_BE: | |
653 | case SNDRV_PCM_FORMAT_DSD_U32_BE: | |
654 | ep->silence_value = 0x69; | |
655 | break; | |
656 | default: | |
657 | ep->silence_value = 0; | |
658 | } | |
8fdff6a3 | 659 | |
fd1a5059 AP |
660 | /* assume max. frequency is 50% higher than nominal */ |
661 | ep->freqmax = ep->freqn + (ep->freqn >> 1); | |
ab30965d RW |
662 | /* Round up freqmax to nearest integer in order to calculate maximum |
663 | * packet size, which must represent a whole number of frames. | |
664 | * This is accomplished by adding 0x0.ffff before converting the | |
665 | * Q16.16 format into integer. | |
666 | * In order to accurately calculate the maximum packet size when | |
667 | * the data interval is more than 1 (i.e. ep->datainterval > 0), | |
668 | * multiply by the data interval prior to rounding. For instance, | |
669 | * a freqmax of 41 kHz will result in a max packet size of 6 (5.125) | |
670 | * frames with a data interval of 1, but 11 (10.25) frames with a | |
671 | * data interval of 2. | |
672 | * (ep->freqmax << ep->datainterval overflows at 8.192 MHz for the | |
673 | * maximum datainterval value of 3, at USB full speed, higher for | |
674 | * USB high speed, noting that ep->freqmax is in units of | |
675 | * frames per packet in Q16.16 format.) | |
676 | */ | |
677 | maxsize = (((ep->freqmax << ep->datainterval) + 0xffff) >> 16) * | |
678 | (frame_bits >> 3); | |
759c90fe RW |
679 | if (tx_length_quirk) |
680 | maxsize += sizeof(__le32); /* Space for length descriptor */ | |
57e6dae1 CL |
681 | /* but wMaxPacketSize might reduce this */ |
682 | if (ep->maxpacksize && ep->maxpacksize < maxsize) { | |
8fdff6a3 | 683 | /* whatever fits into a max. size packet */ |
759c90fe RW |
684 | unsigned int data_maxsize = maxsize = ep->maxpacksize; |
685 | ||
686 | if (tx_length_quirk) | |
687 | /* Need to remove the length descriptor to calc freq */ | |
688 | data_maxsize -= sizeof(__le32); | |
689 | ep->freqmax = (data_maxsize / (frame_bits >> 3)) | |
8fdff6a3 | 690 | << (16 - ep->datainterval); |
8fdff6a3 DM |
691 | } |
692 | ||
693 | if (ep->fill_max) | |
694 | ep->curpacksize = ep->maxpacksize; | |
695 | else | |
696 | ep->curpacksize = maxsize; | |
697 | ||
976b6c06 | 698 | if (snd_usb_get_speed(ep->chip->dev) != USB_SPEED_FULL) { |
8fdff6a3 | 699 | packs_per_ms = 8 >> ep->datainterval; |
976b6c06 | 700 | max_packs_per_urb = MAX_PACKS_HS; |
8fdff6a3 | 701 | } else { |
976b6c06 AS |
702 | packs_per_ms = 1; |
703 | max_packs_per_urb = MAX_PACKS; | |
8fdff6a3 | 704 | } |
98ae472b | 705 | if (sync_ep && !snd_usb_endpoint_implicit_feedback_sink(ep)) |
976b6c06 AS |
706 | max_packs_per_urb = min(max_packs_per_urb, |
707 | 1U << sync_ep->syncinterval); | |
708 | max_packs_per_urb = max(1u, max_packs_per_urb >> ep->datainterval); | |
709 | ||
710 | /* | |
711 | * Capture endpoints need to use small URBs because there's no way | |
712 | * to tell in advance where the next period will end, and we don't | |
713 | * want the next URB to complete much after the period ends. | |
714 | * | |
715 | * Playback endpoints with implicit sync much use the same parameters | |
716 | * as their corresponding capture endpoint. | |
717 | */ | |
718 | if (usb_pipein(ep->pipe) || | |
719 | snd_usb_endpoint_implicit_feedback_sink(ep)) { | |
720 | ||
a93455e1 TP |
721 | urb_packs = packs_per_ms; |
722 | /* | |
723 | * Wireless devices can poll at a max rate of once per 4ms. | |
724 | * For dataintervals less than 5, increase the packet count to | |
725 | * allow the host controller to use bursting to fill in the | |
726 | * gaps. | |
727 | */ | |
728 | if (snd_usb_get_speed(ep->chip->dev) == USB_SPEED_WIRELESS) { | |
729 | int interval = ep->datainterval; | |
730 | while (interval < 5) { | |
731 | urb_packs <<= 1; | |
732 | ++interval; | |
733 | } | |
734 | } | |
976b6c06 | 735 | /* make capture URBs <= 1 ms and smaller than a period */ |
a93455e1 | 736 | urb_packs = min(max_packs_per_urb, urb_packs); |
976b6c06 AS |
737 | while (urb_packs > 1 && urb_packs * maxsize >= period_bytes) |
738 | urb_packs >>= 1; | |
739 | ep->nurbs = MAX_URBS; | |
8fdff6a3 | 740 | |
976b6c06 AS |
741 | /* |
742 | * Playback endpoints without implicit sync are adjusted so that | |
743 | * a period fits as evenly as possible in the smallest number of | |
744 | * URBs. The total number of URBs is adjusted to the size of the | |
745 | * ALSA buffer, subject to the MAX_URBS and MAX_QUEUE limits. | |
746 | */ | |
747 | } else { | |
8fdff6a3 | 748 | /* determine how small a packet can be */ |
976b6c06 AS |
749 | minsize = (ep->freqn >> (16 - ep->datainterval)) * |
750 | (frame_bits >> 3); | |
8fdff6a3 DM |
751 | /* with sync from device, assume it can be 12% lower */ |
752 | if (sync_ep) | |
753 | minsize -= minsize >> 3; | |
754 | minsize = max(minsize, 1u); | |
8fdff6a3 | 755 | |
976b6c06 AS |
756 | /* how many packets will contain an entire ALSA period? */ |
757 | max_packs_per_period = DIV_ROUND_UP(period_bytes, minsize); | |
758 | ||
759 | /* how many URBs will contain a period? */ | |
760 | urbs_per_period = DIV_ROUND_UP(max_packs_per_period, | |
761 | max_packs_per_urb); | |
762 | /* how many packets are needed in each URB? */ | |
763 | urb_packs = DIV_ROUND_UP(max_packs_per_period, urbs_per_period); | |
764 | ||
765 | /* limit the number of frames in a single URB */ | |
766 | ep->max_urb_frames = DIV_ROUND_UP(frames_per_period, | |
767 | urbs_per_period); | |
768 | ||
769 | /* try to use enough URBs to contain an entire ALSA buffer */ | |
770 | max_urbs = min((unsigned) MAX_URBS, | |
771 | MAX_QUEUE * packs_per_ms / urb_packs); | |
772 | ep->nurbs = min(max_urbs, urbs_per_period * periods_per_buffer); | |
8fdff6a3 DM |
773 | } |
774 | ||
775 | /* allocate and initialize data urbs */ | |
776 | for (i = 0; i < ep->nurbs; i++) { | |
777 | struct snd_urb_ctx *u = &ep->urb[i]; | |
778 | u->index = i; | |
779 | u->ep = ep; | |
976b6c06 | 780 | u->packets = urb_packs; |
8fdff6a3 DM |
781 | u->buffer_size = maxsize * u->packets; |
782 | ||
783 | if (fmt->fmt_type == UAC_FORMAT_TYPE_II) | |
784 | u->packets++; /* for transfer delimiter */ | |
785 | u->urb = usb_alloc_urb(u->packets, GFP_KERNEL); | |
786 | if (!u->urb) | |
787 | goto out_of_memory; | |
788 | ||
789 | u->urb->transfer_buffer = | |
790 | usb_alloc_coherent(ep->chip->dev, u->buffer_size, | |
791 | GFP_KERNEL, &u->urb->transfer_dma); | |
792 | if (!u->urb->transfer_buffer) | |
793 | goto out_of_memory; | |
794 | u->urb->pipe = ep->pipe; | |
c75c5ab5 | 795 | u->urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP; |
8fdff6a3 DM |
796 | u->urb->interval = 1 << ep->datainterval; |
797 | u->urb->context = u; | |
798 | u->urb->complete = snd_complete_urb; | |
799 | INIT_LIST_HEAD(&u->ready_list); | |
800 | } | |
801 | ||
802 | return 0; | |
803 | ||
804 | out_of_memory: | |
805 | release_urbs(ep, 0); | |
806 | return -ENOMEM; | |
807 | } | |
808 | ||
94c27215 DM |
809 | /* |
810 | * configure a sync endpoint | |
811 | */ | |
93721039 | 812 | static int sync_ep_set_params(struct snd_usb_endpoint *ep) |
8fdff6a3 DM |
813 | { |
814 | int i; | |
815 | ||
816 | ep->syncbuf = usb_alloc_coherent(ep->chip->dev, SYNC_URBS * 4, | |
817 | GFP_KERNEL, &ep->sync_dma); | |
818 | if (!ep->syncbuf) | |
819 | return -ENOMEM; | |
820 | ||
821 | for (i = 0; i < SYNC_URBS; i++) { | |
822 | struct snd_urb_ctx *u = &ep->urb[i]; | |
823 | u->index = i; | |
824 | u->ep = ep; | |
825 | u->packets = 1; | |
826 | u->urb = usb_alloc_urb(1, GFP_KERNEL); | |
827 | if (!u->urb) | |
828 | goto out_of_memory; | |
829 | u->urb->transfer_buffer = ep->syncbuf + i * 4; | |
830 | u->urb->transfer_dma = ep->sync_dma + i * 4; | |
831 | u->urb->transfer_buffer_length = 4; | |
832 | u->urb->pipe = ep->pipe; | |
c75c5ab5 | 833 | u->urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP; |
8fdff6a3 DM |
834 | u->urb->number_of_packets = 1; |
835 | u->urb->interval = 1 << ep->syncinterval; | |
836 | u->urb->context = u; | |
837 | u->urb->complete = snd_complete_urb; | |
838 | } | |
839 | ||
840 | ep->nurbs = SYNC_URBS; | |
841 | ||
842 | return 0; | |
843 | ||
844 | out_of_memory: | |
845 | release_urbs(ep, 0); | |
846 | return -ENOMEM; | |
847 | } | |
848 | ||
94c27215 | 849 | /** |
07a5e9d4 | 850 | * snd_usb_endpoint_set_params: configure an snd_usb_endpoint |
94c27215 | 851 | * |
07a5e9d4 | 852 | * @ep: the snd_usb_endpoint to configure |
35ec7aa2 DR |
853 | * @pcm_format: the audio fomat. |
854 | * @channels: the number of audio channels. | |
855 | * @period_bytes: the number of bytes in one alsa period. | |
976b6c06 AS |
856 | * @period_frames: the number of frames in one alsa period. |
857 | * @buffer_periods: the number of periods in one alsa buffer. | |
35ec7aa2 | 858 | * @rate: the frame rate. |
07a5e9d4 DM |
859 | * @fmt: the USB audio format information |
860 | * @sync_ep: the sync endpoint to use, if any | |
94c27215 | 861 | * |
07a5e9d4 | 862 | * Determine the number of URBs to be used on this endpoint. |
94c27215 DM |
863 | * An endpoint must be configured before it can be started. |
864 | * An endpoint that is already running can not be reconfigured. | |
865 | */ | |
8fdff6a3 | 866 | int snd_usb_endpoint_set_params(struct snd_usb_endpoint *ep, |
35ec7aa2 DR |
867 | snd_pcm_format_t pcm_format, |
868 | unsigned int channels, | |
869 | unsigned int period_bytes, | |
976b6c06 AS |
870 | unsigned int period_frames, |
871 | unsigned int buffer_periods, | |
35ec7aa2 | 872 | unsigned int rate, |
8fdff6a3 DM |
873 | struct audioformat *fmt, |
874 | struct snd_usb_endpoint *sync_ep) | |
875 | { | |
876 | int err; | |
877 | ||
878 | if (ep->use_count != 0) { | |
0ba41d91 TI |
879 | usb_audio_warn(ep->chip, |
880 | "Unable to change format on ep #%x: already in use\n", | |
881 | ep->ep_num); | |
8fdff6a3 DM |
882 | return -EBUSY; |
883 | } | |
884 | ||
885 | /* release old buffers, if any */ | |
886 | release_urbs(ep, 0); | |
887 | ||
888 | ep->datainterval = fmt->datainterval; | |
889 | ep->maxpacksize = fmt->maxpacksize; | |
85f71932 | 890 | ep->fill_max = !!(fmt->attributes & UAC_EP_CS_ATTR_FILL_MAX); |
8fdff6a3 DM |
891 | |
892 | if (snd_usb_get_speed(ep->chip->dev) == USB_SPEED_FULL) | |
35ec7aa2 | 893 | ep->freqn = get_usb_full_speed_rate(rate); |
8fdff6a3 | 894 | else |
35ec7aa2 | 895 | ep->freqn = get_usb_high_speed_rate(rate); |
8fdff6a3 DM |
896 | |
897 | /* calculate the frequency in 16.16 format */ | |
898 | ep->freqm = ep->freqn; | |
899 | ep->freqshift = INT_MIN; | |
900 | ||
901 | ep->phase = 0; | |
902 | ||
903 | switch (ep->type) { | |
904 | case SND_USB_ENDPOINT_TYPE_DATA: | |
35ec7aa2 | 905 | err = data_ep_set_params(ep, pcm_format, channels, |
976b6c06 AS |
906 | period_bytes, period_frames, |
907 | buffer_periods, fmt, sync_ep); | |
8fdff6a3 DM |
908 | break; |
909 | case SND_USB_ENDPOINT_TYPE_SYNC: | |
93721039 | 910 | err = sync_ep_set_params(ep); |
8fdff6a3 DM |
911 | break; |
912 | default: | |
913 | err = -EINVAL; | |
914 | } | |
915 | ||
0ba41d91 TI |
916 | usb_audio_dbg(ep->chip, |
917 | "Setting params for ep #%x (type %d, %d urbs), ret=%d\n", | |
918 | ep->ep_num, ep->type, ep->nurbs, err); | |
8fdff6a3 DM |
919 | |
920 | return err; | |
921 | } | |
922 | ||
94c27215 DM |
923 | /** |
924 | * snd_usb_endpoint_start: start an snd_usb_endpoint | |
925 | * | |
1d0f9530 | 926 | * @ep: the endpoint to start |
94c27215 DM |
927 | * |
928 | * A call to this function will increment the use count of the endpoint. | |
07a5e9d4 | 929 | * In case it is not already running, the URBs for this endpoint will be |
94c27215 DM |
930 | * submitted. Otherwise, this function does nothing. |
931 | * | |
932 | * Must be balanced to calls of snd_usb_endpoint_stop(). | |
933 | * | |
934 | * Returns an error if the URB submission failed, 0 in all other cases. | |
935 | */ | |
1d0f9530 | 936 | int snd_usb_endpoint_start(struct snd_usb_endpoint *ep) |
8fdff6a3 DM |
937 | { |
938 | int err; | |
939 | unsigned int i; | |
940 | ||
47ab1545 | 941 | if (atomic_read(&ep->chip->shutdown)) |
8fdff6a3 DM |
942 | return -EBADFD; |
943 | ||
944 | /* already running? */ | |
945 | if (++ep->use_count != 1) | |
946 | return 0; | |
947 | ||
015618b9 | 948 | /* just to be sure */ |
ccc1696d | 949 | deactivate_urbs(ep, false); |
015618b9 | 950 | |
8fdff6a3 DM |
951 | ep->active_mask = 0; |
952 | ep->unlink_mask = 0; | |
953 | ep->phase = 0; | |
954 | ||
2b58fd5b DM |
955 | snd_usb_endpoint_start_quirk(ep); |
956 | ||
8fdff6a3 DM |
957 | /* |
958 | * If this endpoint has a data endpoint as implicit feedback source, | |
959 | * don't start the urbs here. Instead, mark them all as available, | |
07a5e9d4 DM |
960 | * wait for the record urbs to return and queue the playback urbs |
961 | * from that context. | |
8fdff6a3 DM |
962 | */ |
963 | ||
964 | set_bit(EP_FLAG_RUNNING, &ep->flags); | |
965 | ||
98ae472b | 966 | if (snd_usb_endpoint_implicit_feedback_sink(ep)) { |
8fdff6a3 DM |
967 | for (i = 0; i < ep->nurbs; i++) { |
968 | struct snd_urb_ctx *ctx = ep->urb + i; | |
969 | list_add_tail(&ctx->ready_list, &ep->ready_playback_urbs); | |
970 | } | |
971 | ||
972 | return 0; | |
973 | } | |
974 | ||
975 | for (i = 0; i < ep->nurbs; i++) { | |
976 | struct urb *urb = ep->urb[i].urb; | |
977 | ||
978 | if (snd_BUG_ON(!urb)) | |
979 | goto __error; | |
980 | ||
981 | if (usb_pipeout(ep->pipe)) { | |
8fdff6a3 DM |
982 | prepare_outbound_urb(ep, urb->context); |
983 | } else { | |
984 | prepare_inbound_urb(ep, urb->context); | |
985 | } | |
986 | ||
987 | err = usb_submit_urb(urb, GFP_ATOMIC); | |
988 | if (err < 0) { | |
0ba41d91 TI |
989 | usb_audio_err(ep->chip, |
990 | "cannot submit urb %d, error %d: %s\n", | |
991 | i, err, usb_error_string(err)); | |
8fdff6a3 DM |
992 | goto __error; |
993 | } | |
994 | set_bit(i, &ep->active_mask); | |
995 | } | |
996 | ||
997 | return 0; | |
998 | ||
999 | __error: | |
1000 | clear_bit(EP_FLAG_RUNNING, &ep->flags); | |
1001 | ep->use_count--; | |
ccc1696d | 1002 | deactivate_urbs(ep, false); |
8fdff6a3 DM |
1003 | return -EPIPE; |
1004 | } | |
1005 | ||
94c27215 DM |
1006 | /** |
1007 | * snd_usb_endpoint_stop: stop an snd_usb_endpoint | |
1008 | * | |
1009 | * @ep: the endpoint to stop (may be NULL) | |
1010 | * | |
1011 | * A call to this function will decrement the use count of the endpoint. | |
1012 | * In case the last user has requested the endpoint stop, the URBs will | |
07a5e9d4 | 1013 | * actually be deactivated. |
94c27215 DM |
1014 | * |
1015 | * Must be balanced to calls of snd_usb_endpoint_start(). | |
b2eb950d TI |
1016 | * |
1017 | * The caller needs to synchronize the pending stop operation via | |
1018 | * snd_usb_endpoint_sync_pending_stop(). | |
94c27215 | 1019 | */ |
b2eb950d | 1020 | void snd_usb_endpoint_stop(struct snd_usb_endpoint *ep) |
8fdff6a3 DM |
1021 | { |
1022 | if (!ep) | |
1023 | return; | |
1024 | ||
1025 | if (snd_BUG_ON(ep->use_count == 0)) | |
1026 | return; | |
1027 | ||
8fdff6a3 | 1028 | if (--ep->use_count == 0) { |
ccc1696d | 1029 | deactivate_urbs(ep, false); |
b2eb950d | 1030 | set_bit(EP_FLAG_STOPPING, &ep->flags); |
8fdff6a3 DM |
1031 | } |
1032 | } | |
1033 | ||
94c27215 DM |
1034 | /** |
1035 | * snd_usb_endpoint_deactivate: deactivate an snd_usb_endpoint | |
1036 | * | |
1037 | * @ep: the endpoint to deactivate | |
1038 | * | |
9b7c552b EZ |
1039 | * If the endpoint is not currently in use, this functions will |
1040 | * deactivate its associated URBs. | |
94c27215 DM |
1041 | * |
1042 | * In case of any active users, this functions does nothing. | |
94c27215 | 1043 | */ |
9b7c552b | 1044 | void snd_usb_endpoint_deactivate(struct snd_usb_endpoint *ep) |
8fdff6a3 DM |
1045 | { |
1046 | if (!ep) | |
9b7c552b | 1047 | return; |
8fdff6a3 DM |
1048 | |
1049 | if (ep->use_count != 0) | |
9b7c552b | 1050 | return; |
8fdff6a3 | 1051 | |
239b9f79 EZ |
1052 | deactivate_urbs(ep, true); |
1053 | wait_clear_urbs(ep); | |
8fdff6a3 DM |
1054 | } |
1055 | ||
92a586bd TI |
1056 | /** |
1057 | * snd_usb_endpoint_release: Tear down an snd_usb_endpoint | |
1058 | * | |
1059 | * @ep: the endpoint to release | |
1060 | * | |
1061 | * This function does not care for the endpoint's use count but will tear | |
1062 | * down all the streaming URBs immediately. | |
1063 | */ | |
1064 | void snd_usb_endpoint_release(struct snd_usb_endpoint *ep) | |
1065 | { | |
1066 | release_urbs(ep, 1); | |
1067 | } | |
1068 | ||
07a5e9d4 DM |
1069 | /** |
1070 | * snd_usb_endpoint_free: Free the resources of an snd_usb_endpoint | |
94c27215 | 1071 | * |
a6cece9d | 1072 | * @ep: the endpoint to free |
94c27215 | 1073 | * |
92a586bd | 1074 | * This free all resources of the given ep. |
94c27215 | 1075 | */ |
a6cece9d | 1076 | void snd_usb_endpoint_free(struct snd_usb_endpoint *ep) |
8fdff6a3 | 1077 | { |
8fdff6a3 DM |
1078 | kfree(ep); |
1079 | } | |
1080 | ||
94c27215 DM |
1081 | /** |
1082 | * snd_usb_handle_sync_urb: parse an USB sync packet | |
1083 | * | |
1084 | * @ep: the endpoint to handle the packet | |
1085 | * @sender: the sending endpoint | |
1086 | * @urb: the received packet | |
1087 | * | |
1088 | * This function is called from the context of an endpoint that received | |
1089 | * the packet and is used to let another endpoint object handle the payload. | |
8fdff6a3 DM |
1090 | */ |
1091 | void snd_usb_handle_sync_urb(struct snd_usb_endpoint *ep, | |
1092 | struct snd_usb_endpoint *sender, | |
1093 | const struct urb *urb) | |
1094 | { | |
1095 | int shift; | |
1096 | unsigned int f; | |
1097 | unsigned long flags; | |
1098 | ||
1099 | snd_BUG_ON(ep == sender); | |
1100 | ||
94c27215 DM |
1101 | /* |
1102 | * In case the endpoint is operating in implicit feedback mode, prepare | |
07a5e9d4 DM |
1103 | * a new outbound URB that has the same layout as the received packet |
1104 | * and add it to the list of pending urbs. queue_pending_output_urbs() | |
1105 | * will take care of them later. | |
94c27215 | 1106 | */ |
98ae472b | 1107 | if (snd_usb_endpoint_implicit_feedback_sink(ep) && |
8fdff6a3 DM |
1108 | ep->use_count != 0) { |
1109 | ||
1110 | /* implicit feedback case */ | |
1111 | int i, bytes = 0; | |
1112 | struct snd_urb_ctx *in_ctx; | |
1113 | struct snd_usb_packet_info *out_packet; | |
1114 | ||
1115 | in_ctx = urb->context; | |
1116 | ||
1117 | /* Count overall packet size */ | |
1118 | for (i = 0; i < in_ctx->packets; i++) | |
1119 | if (urb->iso_frame_desc[i].status == 0) | |
1120 | bytes += urb->iso_frame_desc[i].actual_length; | |
1121 | ||
1122 | /* | |
1123 | * skip empty packets. At least M-Audio's Fast Track Ultra stops | |
1124 | * streaming once it received a 0-byte OUT URB | |
1125 | */ | |
1126 | if (bytes == 0) | |
1127 | return; | |
1128 | ||
1129 | spin_lock_irqsave(&ep->lock, flags); | |
1130 | out_packet = ep->next_packet + ep->next_packet_write_pos; | |
1131 | ||
1132 | /* | |
1133 | * Iterate through the inbound packet and prepare the lengths | |
1134 | * for the output packet. The OUT packet we are about to send | |
28acb120 EZ |
1135 | * will have the same amount of payload bytes per stride as the |
1136 | * IN packet we just received. Since the actual size is scaled | |
1137 | * by the stride, use the sender stride to calculate the length | |
1138 | * in case the number of channels differ between the implicitly | |
1139 | * fed-back endpoint and the synchronizing endpoint. | |
8fdff6a3 DM |
1140 | */ |
1141 | ||
1142 | out_packet->packets = in_ctx->packets; | |
1143 | for (i = 0; i < in_ctx->packets; i++) { | |
1144 | if (urb->iso_frame_desc[i].status == 0) | |
1145 | out_packet->packet_size[i] = | |
28acb120 | 1146 | urb->iso_frame_desc[i].actual_length / sender->stride; |
8fdff6a3 DM |
1147 | else |
1148 | out_packet->packet_size[i] = 0; | |
1149 | } | |
1150 | ||
1151 | ep->next_packet_write_pos++; | |
1152 | ep->next_packet_write_pos %= MAX_URBS; | |
1153 | spin_unlock_irqrestore(&ep->lock, flags); | |
1154 | queue_pending_output_urbs(ep); | |
1155 | ||
1156 | return; | |
1157 | } | |
1158 | ||
94c27215 DM |
1159 | /* |
1160 | * process after playback sync complete | |
1161 | * | |
1162 | * Full speed devices report feedback values in 10.14 format as samples | |
1163 | * per frame, high speed devices in 16.16 format as samples per | |
1164 | * microframe. | |
1165 | * | |
1166 | * Because the Audio Class 1 spec was written before USB 2.0, many high | |
1167 | * speed devices use a wrong interpretation, some others use an | |
1168 | * entirely different format. | |
1169 | * | |
1170 | * Therefore, we cannot predict what format any particular device uses | |
1171 | * and must detect it automatically. | |
1172 | */ | |
8fdff6a3 DM |
1173 | |
1174 | if (urb->iso_frame_desc[0].status != 0 || | |
1175 | urb->iso_frame_desc[0].actual_length < 3) | |
1176 | return; | |
1177 | ||
1178 | f = le32_to_cpup(urb->transfer_buffer); | |
1179 | if (urb->iso_frame_desc[0].actual_length == 3) | |
1180 | f &= 0x00ffffff; | |
1181 | else | |
1182 | f &= 0x0fffffff; | |
1183 | ||
1184 | if (f == 0) | |
1185 | return; | |
1186 | ||
ca0dd273 | 1187 | if (unlikely(sender->tenor_fb_quirk)) { |
7040b6d1 | 1188 | /* |
ca0dd273 DM |
1189 | * Devices based on Tenor 8802 chipsets (TEAC UD-H01 |
1190 | * and others) sometimes change the feedback value | |
7040b6d1 CL |
1191 | * by +/- 0x1.0000. |
1192 | */ | |
1193 | if (f < ep->freqn - 0x8000) | |
36e1ac3c | 1194 | f += 0xf000; |
7040b6d1 | 1195 | else if (f > ep->freqn + 0x8000) |
36e1ac3c | 1196 | f -= 0xf000; |
7040b6d1 | 1197 | } else if (unlikely(ep->freqshift == INT_MIN)) { |
8fdff6a3 DM |
1198 | /* |
1199 | * The first time we see a feedback value, determine its format | |
1200 | * by shifting it left or right until it matches the nominal | |
1201 | * frequency value. This assumes that the feedback does not | |
1202 | * differ from the nominal value more than +50% or -25%. | |
1203 | */ | |
1204 | shift = 0; | |
1205 | while (f < ep->freqn - ep->freqn / 4) { | |
1206 | f <<= 1; | |
1207 | shift++; | |
1208 | } | |
1209 | while (f > ep->freqn + ep->freqn / 2) { | |
1210 | f >>= 1; | |
1211 | shift--; | |
1212 | } | |
1213 | ep->freqshift = shift; | |
1214 | } else if (ep->freqshift >= 0) | |
1215 | f <<= ep->freqshift; | |
1216 | else | |
1217 | f >>= -ep->freqshift; | |
1218 | ||
1219 | if (likely(f >= ep->freqn - ep->freqn / 8 && f <= ep->freqmax)) { | |
1220 | /* | |
1221 | * If the frequency looks valid, set it. | |
1222 | * This value is referred to in prepare_playback_urb(). | |
1223 | */ | |
1224 | spin_lock_irqsave(&ep->lock, flags); | |
1225 | ep->freqm = f; | |
1226 | spin_unlock_irqrestore(&ep->lock, flags); | |
1227 | } else { | |
1228 | /* | |
1229 | * Out of range; maybe the shift value is wrong. | |
1230 | * Reset it so that we autodetect again the next time. | |
1231 | */ | |
1232 | ep->freqshift = INT_MIN; | |
1233 | } | |
1234 | } | |
1235 |