network reload: fix UPID parsing

[pve-network.git] / src / test / zones / evpn / ebgp_loopback / expected_controller_config

frr version 8.2.2
frr defaults datacenter
hostname localhost
log syslog informational
service integrated-vtysh-config
!
!
vrf vrf_myzone
 vni 1000
exit-vrf
!
router bgp 65001
 bgp router-id 192.168.0.1
 no bgp default ipv4-unicast
 coalesce-time 1000
 neighbor VTEP peer-group
 neighbor VTEP remote-as external
 neighbor VTEP bfd
 neighbor VTEP ebgp-multihop 10
 neighbor VTEP update-source dummy1
 neighbor 192.168.0.2 peer-group VTEP
 neighbor 192.168.0.3 peer-group VTEP
 bgp disable-ebgp-connected-route-check
 neighbor BGP peer-group
 neighbor BGP remote-as external
 neighbor BGP bfd
 neighbor 172.16.0.254 peer-group BGP
 neighbor 172.17.0.254 peer-group BGP
 !
 address-family ipv4 unicast
  network 192.168.0.1/32
  neighbor BGP activate
  neighbor BGP soft-reconfiguration inbound
 exit-address-family
 !
 address-family l2vpn evpn
  neighbor VTEP route-map MAP_VTEP_IN in
  neighbor VTEP route-map MAP_VTEP_OUT out
  neighbor VTEP activate
  advertise-all-vni
  autort as 65000
 exit-address-family
exit
!
router bgp 65001 vrf vrf_myzone
 bgp router-id 192.168.0.1
 !
 address-family l2vpn evpn
  route-target import 65000:1000
  route-target export 65000:1000
 exit-address-family
exit
!
ip prefix-list loopbacks_ips seq 10 permit 0.0.0.0/0 le 32
!
route-map MAP_VTEP_IN permit 1
exit
!
route-map MAP_VTEP_OUT permit 1
exit
!
route-map correct_src permit 1
 match ip address prefix-list loopbacks_ips
 set src 192.168.0.1
exit
!
ip protocol bgp route-map correct_src
!
line vty
!