]>
Commit | Line | Data |
---|---|---|
f295c17b | 1 | AT_BANNER([OVN components]) |
10b1662b BP |
2 | |
3 | AT_SETUP([ovn -- lexer]) | |
4 | dnl For lines without =>, input and expected output are identical. | |
5 | dnl For lines with =>, input precedes => and expected output follows =>. | |
6 | AT_DATA([test-cases.txt], [dnl | |
7 | foo bar baz quuxquuxquux _abcd_ a.b.c.d a123_.456 | |
8 | "abc\u0020def" => "abc def" | |
9 | " => error("Input ends inside quoted string.")dnl " | |
10 | ||
11 | a/*b*/c => a c | |
12 | a//b c => a | |
13 | a/**/b => a b | |
14 | a/*/b => a error("`/*' without matching `*/'.") | |
15 | a/*/**/b => a b | |
16 | a/b => a error("`/' is only valid as part of `//' or `/*'.") b | |
17 | ||
18 | 0 1 12345 18446744073709551615 | |
19 | 18446744073709551616 => error("Decimal constants must be less than 2**64.") | |
20 | 9999999999999999999999 => error("Decimal constants must be less than 2**64.") | |
21 | 01 => error("Decimal constants must not have leading zeros.") | |
22 | ||
23 | 0/0 | |
24 | 0/1 | |
25 | 1/0 => error("Value contains unmasked 1-bits.") | |
26 | 1/1 | |
27 | 128/384 | |
28 | 1/3 | |
29 | 1/ => error("Integer constant expected.") | |
30 | ||
31 | 1/0x123 => error("Value and mask have incompatible formats.") | |
32 | ||
33 | 0x1234 | |
34 | 0x01234 => 0x1234 | |
35 | 0x0 => 0 | |
36 | 0x000 => 0 | |
37 | 0xfedcba9876543210 | |
38 | 0XFEDCBA9876543210 => 0xfedcba9876543210 | |
39 | 0xfedcba9876543210fedcba9876543210 | |
10b1662b BP |
40 | 0x0000fedcba9876543210fedcba9876543210 => 0xfedcba9876543210fedcba9876543210 |
41 | 0x => error("Hex digits expected following 0x.") | |
42 | 0X => error("Hex digits expected following 0X.") | |
43 | 0x0/0x0 => 0/0 | |
44 | 0x0/0x1 => 0/0x1 | |
45 | 0x1/0x0 => error("Value contains unmasked 1-bits.") | |
46 | 0xffff/0x1ffff | |
47 | 0x. => error("Invalid syntax in hexadecimal constant.") | |
48 | ||
49 | 192.168.128.1 1.2.3.4 255.255.255.255 0.0.0.0 | |
50 | 256.1.2.3 => error("Invalid numeric constant.") | |
51 | 192.168.0.0/16 | |
52 | 192.168.0.0/255.255.0.0 => 192.168.0.0/16 | |
53 | 192.168.0.0/255.255.255.0 => 192.168.0.0/24 | |
54 | 192.168.0.0/255.255.0.255 | |
55 | 192.168.0.0/255.0.0.0 => error("Value contains unmasked 1-bits.") | |
56 | 192.168.0.0/32 | |
57 | 192.168.0.0/255.255.255.255 => 192.168.0.0/32 | |
58 | ||
59 | :: | |
60 | ::1 | |
61 | ff00::1234 => ff00::1234 | |
62 | 2001:db8:85a3::8a2e:370:7334 | |
63 | 2001:db8:85a3:0:0:8a2e:370:7334 => 2001:db8:85a3::8a2e:370:7334 | |
64 | 2001:0db8:85a3:0000:0000:8a2e:0370:7334 => 2001:db8:85a3::8a2e:370:7334 | |
65 | ::ffff:192.0.2.128 | |
66 | ::ffff:c000:0280 => ::ffff:192.0.2.128 | |
67 | ::1/::1 | |
68 | ::1/ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff => ::1/128 | |
69 | ::1/128 | |
70 | ff00::/8 | |
71 | ff00::/ff00:: => ff00::/8 | |
72 | ||
73 | 01:23:45:67:ab:cd | |
74 | 01:23:45:67:AB:CD => 01:23:45:67:ab:cd | |
75 | fe:dc:ba:98:76:54 | |
76 | FE:DC:ba:98:76:54 => fe:dc:ba:98:76:54 | |
77 | 01:00:00:00:00:00/01:00:00:00:00:00 | |
78 | ff:ff:ff:ff:ff:ff/ff:ff:ff:ff:ff:ff | |
79 | fe:ff:ff:ff:ff:ff/ff:ff:ff:ff:ff:ff | |
80 | ff:ff:ff:ff:ff:ff/fe:ff:ff:ff:ff:ff => error("Value contains unmasked 1-bits.") | |
81 | fe:x => error("Invalid numeric constant.") | |
82 | 00:01:02:03:04:x => error("Invalid numeric constant.") | |
83 | ||
a20c96c6 | 84 | # Test that operators are tokenized as expected, even without white space. |
56091efe | 85 | (){}[[]]==!=<<=>>=!&&||..,;=<->-- => ( ) { } [[ ]] == != < <= > >= ! && || .. , ; = <-> -- |
10b1662b BP |
86 | & => error("`&' is only valid as part of `&&'.") |
87 | | => error("`|' is only valid as part of `||'.") | |
56091efe | 88 | - => error("`-' is only valid as part of `--'.") |
10b1662b BP |
89 | |
90 | ^ => error("Invalid character `^' in input.") | |
91 | ]) | |
92 | AT_CAPTURE_FILE([input.txt]) | |
93 | sed 's/ =>.*//' test-cases.txt > input.txt | |
94 | sed 's/.* => //' test-cases.txt > expout | |
95 | AT_CHECK([ovstest test-ovn lex < input.txt], [0], [expout]) | |
96 | AT_CLEANUP | |
e0840f11 BP |
97 | |
98 | AT_SETUP([ovn -- expression parser]) | |
99 | dnl For lines without =>, input and expected output are identical. | |
100 | dnl For lines with =>, input precedes => and expected output follows =>. | |
101 | AT_DATA([test-cases.txt], [[ | |
102 | eth.type == 0x800 | |
103 | eth.type==0x800 => eth.type == 0x800 | |
104 | eth.type[0..15] == 0x800 => eth.type == 0x800 | |
105 | ||
106 | vlan.present | |
107 | vlan.present == 1 => vlan.present | |
108 | !(vlan.present == 0) => vlan.present | |
109 | !(vlan.present != 1) => vlan.present | |
110 | !vlan.present | |
111 | vlan.present == 0 => !vlan.present | |
112 | vlan.present != 1 => !vlan.present | |
113 | !(vlan.present == 1) => !vlan.present | |
114 | !(vlan.present != 0) => !vlan.present | |
115 | ||
116 | eth.dst[0] | |
117 | eth.dst[0] == 1 => eth.dst[0] | |
118 | eth.dst[0] != 0 => eth.dst[0] | |
119 | !(eth.dst[0] == 0) => eth.dst[0] | |
120 | !(eth.dst[0] != 1) => eth.dst[0] | |
121 | ||
122 | !eth.dst[0] | |
123 | eth.dst[0] == 0 => !eth.dst[0] | |
124 | eth.dst[0] != 1 => !eth.dst[0] | |
125 | !(eth.dst[0] == 1) => !eth.dst[0] | |
126 | !(eth.dst[0] != 0) => !eth.dst[0] | |
127 | ||
128 | vlan.tci[12..15] == 0x3 | |
129 | vlan.tci == 0x3000/0xf000 => vlan.tci[12..15] == 0x3 | |
130 | vlan.tci[12..15] != 0x3 | |
131 | vlan.tci != 0x3000/0xf000 => vlan.tci[12..15] != 0x3 | |
132 | ||
133 | !vlan.pcp => vlan.pcp == 0 | |
134 | !(vlan.pcp) => vlan.pcp == 0 | |
135 | vlan.pcp == 0x4 | |
136 | vlan.pcp != 0x4 | |
137 | vlan.pcp > 0x4 | |
138 | vlan.pcp >= 0x4 | |
139 | vlan.pcp < 0x4 | |
140 | vlan.pcp <= 0x4 | |
141 | !(vlan.pcp != 0x4) => vlan.pcp == 0x4 | |
142 | !(vlan.pcp == 0x4) => vlan.pcp != 0x4 | |
143 | !(vlan.pcp <= 0x4) => vlan.pcp > 0x4 | |
144 | !(vlan.pcp < 0x4) => vlan.pcp >= 0x4 | |
145 | !(vlan.pcp >= 0x4) => vlan.pcp < 0x4 | |
146 | !(vlan.pcp > 0x4) => vlan.pcp <= 0x4 | |
147 | 0x4 == vlan.pcp => vlan.pcp == 0x4 | |
148 | 0x4 != vlan.pcp => vlan.pcp != 0x4 | |
149 | 0x4 < vlan.pcp => vlan.pcp > 0x4 | |
150 | 0x4 <= vlan.pcp => vlan.pcp >= 0x4 | |
151 | 0x4 > vlan.pcp => vlan.pcp < 0x4 | |
152 | 0x4 >= vlan.pcp => vlan.pcp <= 0x4 | |
153 | !(0x4 != vlan.pcp) => vlan.pcp == 0x4 | |
154 | !(0x4 == vlan.pcp) => vlan.pcp != 0x4 | |
155 | !(0x4 >= vlan.pcp) => vlan.pcp > 0x4 | |
156 | !(0x4 > vlan.pcp) => vlan.pcp >= 0x4 | |
157 | !(0x4 <= vlan.pcp) => vlan.pcp < 0x4 | |
158 | !(0x4 < vlan.pcp) => vlan.pcp <= 0x4 | |
159 | ||
160 | 1 < vlan.pcp < 4 => vlan.pcp > 0x1 && vlan.pcp < 0x4 | |
161 | 1 <= vlan.pcp <= 4 => vlan.pcp >= 0x1 && vlan.pcp <= 0x4 | |
162 | 1 < vlan.pcp <= 4 => vlan.pcp > 0x1 && vlan.pcp <= 0x4 | |
163 | 1 <= vlan.pcp < 4 => vlan.pcp >= 0x1 && vlan.pcp < 0x4 | |
164 | 1 <= vlan.pcp <= 4 => vlan.pcp >= 0x1 && vlan.pcp <= 0x4 | |
165 | 4 > vlan.pcp > 1 => vlan.pcp < 0x4 && vlan.pcp > 0x1 | |
166 | 4 >= vlan.pcp > 1 => vlan.pcp <= 0x4 && vlan.pcp > 0x1 | |
167 | 4 > vlan.pcp >= 1 => vlan.pcp < 0x4 && vlan.pcp >= 0x1 | |
168 | 4 >= vlan.pcp >= 1 => vlan.pcp <= 0x4 && vlan.pcp >= 0x1 | |
169 | !(1 < vlan.pcp < 4) => vlan.pcp <= 0x1 || vlan.pcp >= 0x4 | |
170 | !(1 <= vlan.pcp <= 4) => vlan.pcp < 0x1 || vlan.pcp > 0x4 | |
171 | !(1 < vlan.pcp <= 4) => vlan.pcp <= 0x1 || vlan.pcp > 0x4 | |
172 | !(1 <= vlan.pcp < 4) => vlan.pcp < 0x1 || vlan.pcp >= 0x4 | |
173 | !(1 <= vlan.pcp <= 4) => vlan.pcp < 0x1 || vlan.pcp > 0x4 | |
174 | !(4 > vlan.pcp > 1) => vlan.pcp >= 0x4 || vlan.pcp <= 0x1 | |
175 | !(4 >= vlan.pcp > 1) => vlan.pcp > 0x4 || vlan.pcp <= 0x1 | |
176 | !(4 > vlan.pcp >= 1) => vlan.pcp >= 0x4 || vlan.pcp < 0x1 | |
177 | !(4 >= vlan.pcp >= 1) => vlan.pcp > 0x4 || vlan.pcp < 0x1 | |
178 | ||
179 | vlan.pcp == {1, 2, 3, 4} => vlan.pcp == 0x1 || vlan.pcp == 0x2 || vlan.pcp == 0x3 || vlan.pcp == 0x4 | |
180 | vlan.pcp == 1 || ((vlan.pcp == 2 || vlan.pcp == 3) || vlan.pcp == 4) => vlan.pcp == 0x1 || vlan.pcp == 0x2 || vlan.pcp == 0x3 || vlan.pcp == 0x4 | |
181 | ||
182 | vlan.pcp != {1, 2, 3, 4} => vlan.pcp != 0x1 && vlan.pcp != 0x2 && vlan.pcp != 0x3 && vlan.pcp != 0x4 | |
183 | vlan.pcp == 1 && ((vlan.pcp == 2 && vlan.pcp == 3) && vlan.pcp == 4) => vlan.pcp == 0x1 && vlan.pcp == 0x2 && vlan.pcp == 0x3 && vlan.pcp == 0x4 | |
184 | ||
185 | vlan.pcp == 1 && !((vlan.pcp == 2 && vlan.pcp == 3) && vlan.pcp == 4) => vlan.pcp == 0x1 && (vlan.pcp != 0x2 || vlan.pcp != 0x3 || vlan.pcp != 0x4) | |
186 | vlan.pcp == 1 && (!(vlan.pcp == 2 && vlan.pcp == 3) && vlan.pcp == 4) => vlan.pcp == 0x1 && (vlan.pcp != 0x2 || vlan.pcp != 0x3) && vlan.pcp == 0x4 | |
187 | vlan.pcp == 1 && !(!(vlan.pcp == 2 && vlan.pcp == 3) && vlan.pcp == 4) => vlan.pcp == 0x1 && ((vlan.pcp == 0x2 && vlan.pcp == 0x3) || vlan.pcp != 0x4) | |
188 | ||
189 | ip4.src == {10.0.0.0/8, 192.168.0.0/16, 172.16.20.0/24, 8.8.8.8} => ip4.src[24..31] == 0xa || ip4.src[16..31] == 0xc0a8 || ip4.src[8..31] == 0xac1014 || ip4.src == 0x8080808 | |
190 | ip6.src == ::1 => ip6.src == 0x1 | |
191 | ||
192 | ip4.src == 1.2.3.4 => ip4.src == 0x1020304 | |
193 | ip4.src == ::1.2.3.4/::ffff:ffff => ip4.src == 0x1020304 | |
194 | ip6.src == ::1 => ip6.src == 0x1 | |
195 | ||
196 | 1 | |
197 | 0 | |
198 | !1 => 0 | |
199 | !0 => 1 | |
200 | ||
201 | inport == "eth0" | |
202 | !(inport != "eth0") => inport == "eth0" | |
203 | ||
3b7cb7e1 BP |
204 | ip4.src == "eth0" => Integer field ip4.src is not compatible with string constant. |
205 | inport == 1 => String field inport is not compatible with integer constant. | |
e0840f11 BP |
206 | |
207 | ip4.src > {1, 2, 3} => Only == and != operators may be used with value sets. | |
208 | eth.type > 0x800 => Only == and != operators may be used with nominal field eth.type. | |
209 | vlan.present > 0 => Only == and != operators may be used with Boolean field vlan.present. | |
210 | ||
211 | inport != "eth0" => Nominal field inport may only be tested for equality (taking enclosing `!' operators into account). | |
212 | !(inport == "eth0") => Nominal field inport may only be tested for equality (taking enclosing `!' operators into account). | |
213 | eth.type != 0x800 => Nominal field eth.type may only be tested for equality (taking enclosing `!' operators into account). | |
214 | !(eth.type == 0x800) => Nominal field eth.type may only be tested for equality (taking enclosing `!' operators into account). | |
215 | ||
216 | 123 == 123 => Syntax error at `123' expecting field name. | |
217 | ||
218 | 123 == xyzzy => Syntax error at `xyzzy' expecting field name. | |
219 | xyzzy == 1 => Syntax error at `xyzzy' expecting field name. | |
220 | ||
221 | inport[1] == 1 => Cannot select subfield of string field inport. | |
222 | ||
223 | eth.type[] == 1 => Syntax error at `@:>@' expecting small integer. | |
224 | eth.type[::1] == 1 => Syntax error at `::1' expecting small integer. | |
225 | eth.type[18446744073709551615] == 1 => Syntax error at `18446744073709551615' expecting small integer. | |
226 | ||
227 | eth.type[5!] => Syntax error at `!' expecting `@:>@'. | |
228 | ||
229 | eth.type[5..1] => Invalid bit range 5 to 1. | |
230 | ||
231 | eth.type[12..16] => Cannot select bits 12 to 16 of 16-bit field eth.type. | |
232 | ||
233 | eth.type[10] == 1 => Cannot select subfield of nominal field eth.type. | |
234 | ||
235 | eth.type => Explicit `!= 0' is required for inequality test of multibit field against 0. | |
236 | ||
237 | !(!(vlan.pcp)) => Explicit `!= 0' is required for inequality test of multibit field against 0. | |
238 | ||
239 | 123 => Syntax error at end of input expecting relational operator. | |
240 | ||
241 | 123 x => Syntax error at `x' expecting relational operator. | |
242 | ||
243 | {1, "eth0"} => Syntax error at `"eth0"' expecting integer. | |
244 | ||
245 | eth.type == xyzzy => Syntax error at `xyzzy' expecting constant. | |
246 | ||
247 | (1 x) => Syntax error at `x' expecting `)'. | |
248 | ||
249 | !0x800 != eth.type => Missing parentheses around operand of !. | |
250 | ||
251 | eth.type == 0x800 || eth.type == 0x86dd && ip.proto == 17 => && and || must be parenthesized when used together. | |
252 | ||
253 | eth.dst == {} => Syntax error at `}' expecting constant. | |
254 | ||
255 | eth.src > 00:00:00:00:11:11/00:00:00:00:ff:ff => Only == and != operators may be used with masked constants. Consider using subfields instead (e.g. eth.src[0..15] > 0x1111 in place of eth.src > 00:00:00:00:11:11/00:00:00:00:ff:ff). | |
256 | ||
3b7cb7e1 | 257 | ip4.src == ::1 => 128-bit constant is not compatible with 32-bit field ip4.src. |
e0840f11 BP |
258 | |
259 | 1 == eth.type == 2 => Range expressions must have the form `x < field < y' or `x > field > y', with each `<' optionally replaced by `<=' or `>' by `>='). | |
8b34ccda JS |
260 | |
261 | eth.dst[40] x => Extra tokens at end of input. | |
e0840f11 BP |
262 | ]]) |
263 | sed 's/ =>.*//' test-cases.txt > input.txt | |
264 | sed 's/.* => //' test-cases.txt > expout | |
265 | AT_CHECK([ovstest test-ovn parse-expr < input.txt], [0], [expout]) | |
266 | AT_CLEANUP | |
267 | ||
268 | AT_SETUP([ovn -- expression annotation]) | |
269 | dnl Input precedes =>, expected output follows =>. | |
270 | AT_DATA([test-cases.txt], [[ | |
271 | ip4.src == 1.2.3.4 => ip4.src == 0x1020304 && eth.type == 0x800 | |
272 | ip4.src != 1.2.3.4 => ip4.src != 0x1020304 && eth.type == 0x800 | |
273 | ip.proto == 123 => ip.proto == 0x7b && (eth.type == 0x800 || eth.type == 0x86dd) | |
274 | ip.proto == {123, 234} => (ip.proto == 0x7b && (eth.type == 0x800 || eth.type == 0x86dd)) || (ip.proto == 0xea && (eth.type == 0x800 || eth.type == 0x86dd)) | |
275 | ip4.src == 1.2.3.4 && ip4.dst == 5.6.7.8 => ip4.src == 0x1020304 && eth.type == 0x800 && ip4.dst == 0x5060708 && eth.type == 0x800 | |
276 | ||
277 | ip => eth.type == 0x800 || eth.type == 0x86dd | |
278 | ip == 1 => eth.type == 0x800 || eth.type == 0x86dd | |
279 | ip[0] == 1 => eth.type == 0x800 || eth.type == 0x86dd | |
280 | ip > 0 => Only == and != operators may be used with nominal field ip. | |
281 | !ip => Nominal predicate ip may only be tested positively, e.g. `ip' or `ip == 1' but not `!ip' or `ip == 0'. | |
282 | ip == 0 => Nominal predicate ip may only be tested positively, e.g. `ip' or `ip == 1' but not `!ip' or `ip == 0'. | |
283 | ||
284 | vlan.present => vlan.tci[12] | |
285 | !vlan.present => !vlan.tci[12] | |
286 | ||
287 | !vlan.pcp => vlan.tci[13..15] == 0 && vlan.tci[12] | |
288 | vlan.pcp == 1 && vlan.vid == 2 => vlan.tci[13..15] == 0x1 && vlan.tci[12] && vlan.tci[0..11] == 0x2 && vlan.tci[12] | |
289 | !reg0 && !reg1 && !reg2 && !reg3 => xreg0[32..63] == 0 && xreg0[0..31] == 0 && xreg1[32..63] == 0 && xreg1[0..31] == 0 | |
290 | ||
291 | ip.first_frag => ip.frag[0] && (eth.type == 0x800 || eth.type == 0x86dd) && (!ip.frag[1] || (eth.type != 0x800 && eth.type != 0x86dd)) | |
292 | !ip.first_frag => !ip.frag[0] || (eth.type != 0x800 && eth.type != 0x86dd) || (ip.frag[1] && (eth.type == 0x800 || eth.type == 0x86dd)) | |
293 | ip.later_frag => ip.frag[1] && (eth.type == 0x800 || eth.type == 0x86dd) | |
294 | ||
295 | bad_prereq != 0 => Error parsing expression `xyzzy' encountered as prerequisite or predicate of initial expression: Syntax error at `xyzzy' expecting field name. | |
296 | self_recurse != 0 => Error parsing expression `self_recurse != 0' encountered as prerequisite or predicate of initial expression: Recursive expansion of symbol `self_recurse'. | |
297 | mutual_recurse_1 != 0 => Error parsing expression `mutual_recurse_2 != 0' encountered as prerequisite or predicate of initial expression: Error parsing expression `mutual_recurse_1 != 0' encountered as prerequisite or predicate of initial expression: Recursive expansion of symbol `mutual_recurse_1'. | |
298 | mutual_recurse_2 != 0 => Error parsing expression `mutual_recurse_1 != 0' encountered as prerequisite or predicate of initial expression: Error parsing expression `mutual_recurse_2 != 0' encountered as prerequisite or predicate of initial expression: Recursive expansion of symbol `mutual_recurse_2'. | |
299 | ]]) | |
300 | sed 's/ =>.*//' test-cases.txt > input.txt | |
301 | sed 's/.* => //' test-cases.txt > expout | |
302 | AT_CHECK([ovstest test-ovn annotate-expr < input.txt], [0], [expout]) | |
303 | AT_CLEANUP | |
304 | ||
9d4aecca | 305 | AT_SETUP([ovn -- 1-term expression conversion]) |
e0840f11 | 306 | AT_CHECK([ovstest test-ovn exhaustive --operation=convert 1], [0], |
9d4aecca | 307 | [Tested converting all 1-terminal expressions with 2 numeric vars (each 3 bits) in terms of operators == != < <= > >= and 2 string vars. |
e0840f11 BP |
308 | ]) |
309 | AT_CLEANUP | |
310 | ||
9d4aecca | 311 | AT_SETUP([ovn -- 2-term expression conversion]) |
e0840f11 | 312 | AT_CHECK([ovstest test-ovn exhaustive --operation=convert 2], [0], |
9d4aecca | 313 | [Tested converting 570 expressions of 2 terminals with 2 numeric vars (each 3 bits) in terms of operators == != < <= > >= and 2 string vars. |
e0840f11 BP |
314 | ]) |
315 | AT_CLEANUP | |
316 | ||
9d4aecca | 317 | AT_SETUP([ovn -- 3-term expression conversion]) |
e0840f11 | 318 | AT_CHECK([ovstest test-ovn exhaustive --operation=convert --bits=2 3], [0], |
9d4aecca | 319 | [Tested converting 62418 expressions of 3 terminals with 2 numeric vars (each 2 bits) in terms of operators == != < <= > >= and 2 string vars. |
e0840f11 BP |
320 | ]) |
321 | AT_CLEANUP | |
322 | ||
9d4aecca BP |
323 | AT_SETUP([ovn -- 3-term numeric expression simplification]) |
324 | AT_CHECK([ovstest test-ovn exhaustive --operation=simplify --nvars=2 --svars=0 3], [0], | |
325 | [Tested simplifying 477138 expressions of 3 terminals with 2 numeric vars (each 3 bits) in terms of operators == != < <= > >=. | |
e0840f11 BP |
326 | ]) |
327 | AT_CLEANUP | |
328 | ||
9d4aecca BP |
329 | AT_SETUP([ovn -- 4-term string expression simplification]) |
330 | AT_CHECK([ovstest test-ovn exhaustive --operation=simplify --nvars=0 --svars=4 4], [0], | |
331 | [Tested simplifying 21978 expressions of 4 terminals with 4 string vars. | |
e0840f11 BP |
332 | ]) |
333 | AT_CLEANUP | |
334 | ||
9d4aecca BP |
335 | AT_SETUP([ovn -- 3-term mixed expression simplification]) |
336 | AT_CHECK([ovstest test-ovn exhaustive --operation=simplify --nvars=1 --svars=1 3], [0], | |
337 | [Tested simplifying 124410 expressions of 3 terminals with 1 numeric vars (each 3 bits) in terms of operators == != < <= > >= and 1 string vars. | |
e0840f11 BP |
338 | ]) |
339 | AT_CLEANUP | |
340 | ||
9d4aecca BP |
341 | AT_SETUP([ovn -- 4-term numeric expression normalization]) |
342 | AT_CHECK([ovstest test-ovn exhaustive --operation=normalize --nvars=3 --svars=0 --bits=1 4], [0], | |
343 | [Tested normalizing 1207162 expressions of 4 terminals with 3 numeric vars (each 1 bits) in terms of operators == != < <= > >=. | |
e0840f11 BP |
344 | ]) |
345 | AT_CLEANUP | |
346 | ||
9d4aecca BP |
347 | AT_SETUP([ovn -- 4-term string expression normalization]) |
348 | AT_CHECK([ovstest test-ovn exhaustive --operation=normalize --nvars=0 --svars=3 --bits=1 4], [0], | |
349 | [Tested normalizing 11242 expressions of 4 terminals with 3 string vars. | |
350 | ]) | |
351 | AT_CLEANUP | |
352 | ||
353 | AT_SETUP([ovn -- 4-term mixed expression normalization]) | |
354 | AT_CHECK([ovstest test-ovn exhaustive --operation=normalize --nvars=1 --bits=1 --svars=2 4], [0], | |
355 | [Tested normalizing 128282 expressions of 4 terminals with 1 numeric vars (each 1 bits) in terms of operators == != < <= > >= and 2 string vars. | |
356 | ]) | |
357 | AT_CLEANUP | |
358 | ||
359 | AT_SETUP([ovn -- 5-term numeric expression normalization]) | |
360 | AT_CHECK([ovstest test-ovn exhaustive --operation=normalize --nvars=3 --svars=0 --bits=1 --relops='==' 5], [0], | |
361 | [Tested normalizing 368550 expressions of 5 terminals with 3 numeric vars (each 1 bits) in terms of operators ==. | |
362 | ]) | |
363 | AT_CLEANUP | |
364 | ||
365 | AT_SETUP([ovn -- 5-term string expression normalization]) | |
366 | AT_CHECK([ovstest test-ovn exhaustive --operation=normalize --nvars=0 --svars=3 --bits=1 --relops='==' 5], [0], | |
367 | [Tested normalizing 368550 expressions of 5 terminals with 3 string vars. | |
368 | ]) | |
369 | AT_CLEANUP | |
370 | ||
371 | AT_SETUP([ovn -- 5-term mixed expression normalization]) | |
372 | AT_CHECK([ovstest test-ovn exhaustive --operation=normalize --nvars=1 --svars=1 --bits=1 --relops='==' 5], [0], | |
373 | [Tested normalizing 116550 expressions of 5 terminals with 1 numeric vars (each 1 bits) in terms of operators == and 1 string vars. | |
374 | ]) | |
375 | AT_CLEANUP | |
376 | ||
377 | AT_SETUP([ovn -- 4-term numeric expressions to flows]) | |
378 | AT_CHECK([ovstest test-ovn exhaustive --operation=flow --nvars=2 --svars=0 --bits=2 --relops='==' 4], [0], | |
379 | [Tested converting to flows 128282 expressions of 4 terminals with 2 numeric vars (each 2 bits) in terms of operators ==. | |
380 | ]) | |
381 | AT_CLEANUP | |
382 | ||
383 | AT_SETUP([ovn -- 4-term string expressions to flows]) | |
384 | AT_CHECK([ovstest test-ovn exhaustive --operation=flow --nvars=0 --svars=4 4], [0], | |
385 | [Tested converting to flows 21978 expressions of 4 terminals with 4 string vars. | |
386 | ]) | |
387 | AT_CLEANUP | |
388 | ||
389 | AT_SETUP([ovn -- 4-term mixed expressions to flows]) | |
390 | AT_CHECK([ovstest test-ovn exhaustive --operation=flow --nvars=1 --bits=2 --svars=1 --relops='==' 4], [0], | |
391 | [Tested converting to flows 37994 expressions of 4 terminals with 1 numeric vars (each 2 bits) in terms of operators == and 1 string vars. | |
392 | ]) | |
393 | AT_CLEANUP | |
394 | ||
395 | AT_SETUP([ovn -- 3-term numeric expressions to flows]) | |
396 | AT_CHECK([ovstest test-ovn exhaustive --operation=flow --nvars=3 --svars=0 --bits=3 --relops='==' 3], [0], | |
397 | [Tested converting to flows 38394 expressions of 3 terminals with 3 numeric vars (each 3 bits) in terms of operators ==. | |
e0840f11 BP |
398 | ]) |
399 | AT_CLEANUP | |
f386a8a7 BP |
400 | |
401 | AT_SETUP([ovn -- converting expressions to flows -- string fields]) | |
402 | expr_to_flow () { | |
403 | echo "$1" | ovstest test-ovn expr-to-flows | sort | |
404 | } | |
3b7cb7e1 | 405 | AT_CHECK([expr_to_flow 'inport == "eth0"'], [0], [reg6=0x5 |
f386a8a7 | 406 | ]) |
3b7cb7e1 | 407 | AT_CHECK([expr_to_flow 'inport == "eth1"'], [0], [reg6=0x6 |
f386a8a7 BP |
408 | ]) |
409 | AT_CHECK([expr_to_flow 'inport == "eth2"'], [0], [(no flows) | |
410 | ]) | |
411 | AT_CHECK([expr_to_flow 'inport == "eth0" && ip'], [0], [dnl | |
3b7cb7e1 BP |
412 | ip,reg6=0x5 |
413 | ipv6,reg6=0x5 | |
f386a8a7 BP |
414 | ]) |
415 | AT_CHECK([expr_to_flow 'inport == "eth1" && ip'], [0], [dnl | |
3b7cb7e1 BP |
416 | ip,reg6=0x6 |
417 | ipv6,reg6=0x6 | |
f386a8a7 BP |
418 | ]) |
419 | AT_CHECK([expr_to_flow 'inport == "eth2" && ip'], [0], [(no flows) | |
420 | ]) | |
421 | AT_CHECK([expr_to_flow 'inport == {"eth0", "eth1", "eth2", "LOCAL"}'], [0], | |
3b7cb7e1 BP |
422 | [reg6=0x5 |
423 | reg6=0x6 | |
424 | reg6=0xfffe | |
f386a8a7 BP |
425 | ]) |
426 | AT_CHECK([expr_to_flow 'inport == {"eth0", "eth1", "eth2"} && ip'], [0], [dnl | |
3b7cb7e1 BP |
427 | ip,reg6=0x5 |
428 | ip,reg6=0x6 | |
429 | ipv6,reg6=0x5 | |
430 | ipv6,reg6=0x6 | |
f386a8a7 | 431 | ]) |
9d4aecca BP |
432 | AT_CHECK([expr_to_flow 'inport == "eth0" && inport == "eth1"'], [0], [dnl |
433 | (no flows) | |
434 | ]) | |
f386a8a7 | 435 | AT_CLEANUP |
3b7cb7e1 BP |
436 | |
437 | AT_SETUP([ovn -- action parsing]) | |
438 | dnl Text before => is input, text after => is expected output. | |
439 | AT_DATA([test-cases.txt], [[ | |
5f822129 | 440 | # drop |
3b7cb7e1 | 441 | drop; => actions=drop, prereqs=1 |
5f822129 BP |
442 | drop; next; => Syntax error at `next' expecting end of input. |
443 | next; drop; => Syntax error at `drop' expecting action. | |
444 | ||
445 | # output | |
446 | output; => actions=resubmit(,64), prereqs=1 | |
447 | ||
448 | # next | |
558ec83d BP |
449 | next; => actions=resubmit(,27), prereqs=1 |
450 | next(0); => actions=resubmit(,16), prereqs=1 | |
451 | next(15); => actions=resubmit(,31), prereqs=1 | |
5f822129 BP |
452 | |
453 | next(); => Syntax error at `)' expecting small integer. | |
454 | next(10; => Syntax error at `;' expecting `)'. | |
455 | next(16); => "next" argument must be in range 0 to 15. | |
456 | ||
457 | # Loading a constant value. | |
3b7cb7e1 BP |
458 | tcp.dst=80; => actions=set_field:80->tcp_dst, prereqs=ip.proto == 0x6 && (eth.type == 0x800 || eth.type == 0x86dd) |
459 | eth.dst[40] = 1; => actions=set_field:01:00:00:00:00:00/01:00:00:00:00:00->eth_dst, prereqs=1 | |
460 | vlan.pcp = 2; => actions=set_field:0x4000/0xe000->vlan_tci, prereqs=vlan.tci[12] | |
461 | vlan.tci[13..15] = 2; => actions=set_field:0x4000/0xe000->vlan_tci, prereqs=1 | |
b4970837 | 462 | inport = ""; => actions=set_field:0->reg6,set_field:0->in_port, prereqs=1 |
47f3b59b | 463 | ip.ttl = 4; => actions=set_field:4->nw_ttl, prereqs=eth.type == 0x800 || eth.type == 0x86dd |
5f822129 | 464 | outport="eth0"; next; outport="LOCAL"; next; => actions=set_field:0x5->reg7,resubmit(,27),set_field:0xfffe->reg7,resubmit(,27), prereqs=1 |
558ec83d | 465 | |
3b7cb7e1 BP |
466 | inport[1] = 1; => Cannot select subfield of string field inport. |
467 | ip.proto[1] = 1; => Cannot select subfield of nominal field ip.proto. | |
468 | eth.dst[40] == 1; => Syntax error at `==' expecting `='. | |
ce57ea75 | 469 | ip = 1; => Predicate symbol ip used where lvalue required. |
3b7cb7e1 BP |
470 | ip.proto = 6; => Field ip.proto is not modifiable. |
471 | inport = {"a", "b"}; => Assignments require a single value. | |
472 | inport = {}; => Syntax error at `}' expecting constant. | |
473 | bad_prereq = 123; => Error parsing expression `xyzzy' encountered as prerequisite or predicate of initial expression: Syntax error at `xyzzy' expecting field name. | |
474 | self_recurse = 123; => Error parsing expression `self_recurse != 0' encountered as prerequisite or predicate of initial expression: Error parsing expression `self_recurse != 0' encountered as prerequisite or predicate of initial expression: Recursive expansion of symbol `self_recurse'. | |
ce57ea75 | 475 | vlan.present = 0; => Predicate symbol vlan.present used where lvalue required. |
5f822129 BP |
476 | |
477 | # Moving one field into another. | |
478 | reg0 = reg1; => actions=move:OXM_OF_PKT_REG0[0..31]->OXM_OF_PKT_REG0[32..63], prereqs=1 | |
479 | vlan.pcp = reg0[0..2]; => actions=move:OXM_OF_PKT_REG0[32..34]->NXM_OF_VLAN_TCI[13..15], prereqs=vlan.tci[12] | |
480 | reg0[10] = vlan.pcp[1]; => actions=move:NXM_OF_VLAN_TCI[14]->OXM_OF_PKT_REG0[42], prereqs=vlan.tci[12] | |
481 | outport = inport; => actions=move:NXM_NX_REG6[]->NXM_NX_REG7[], prereqs=1 | |
482 | ||
ce57ea75 | 483 | reg0[0] = vlan.present; => Predicate symbol vlan.present used where lvalue required. |
5ee054fb BP |
484 | reg0 = reg1[0..10]; => Can't assign 11-bit value to 32-bit destination. |
485 | inport = reg0; => Can't assign integer field (reg0) to string field (inport). | |
486 | inport = big_string; => String fields inport and big_string are incompatible for assignment. | |
487 | ip.proto = reg0[0..7]; => Field ip.proto is not modifiable. | |
5f822129 BP |
488 | |
489 | # Exchanging fields. | |
490 | reg0 <-> reg1; => actions=push:OXM_OF_PKT_REG0[0..31],push:OXM_OF_PKT_REG0[32..63],pop:OXM_OF_PKT_REG0[0..31],pop:OXM_OF_PKT_REG0[32..63], prereqs=1 | |
491 | vlan.pcp <-> reg0[0..2]; => actions=push:OXM_OF_PKT_REG0[32..34],push:NXM_OF_VLAN_TCI[13..15],pop:OXM_OF_PKT_REG0[32..34],pop:NXM_OF_VLAN_TCI[13..15], prereqs=vlan.tci[12] | |
492 | reg0[10] <-> vlan.pcp[1]; => actions=push:NXM_OF_VLAN_TCI[14],push:OXM_OF_PKT_REG0[42],pop:NXM_OF_VLAN_TCI[14],pop:OXM_OF_PKT_REG0[42], prereqs=vlan.tci[12] | |
493 | outport <-> inport; => actions=push:NXM_NX_REG6[],push:NXM_NX_REG7[],pop:NXM_NX_REG6[],pop:NXM_NX_REG7[], prereqs=1 | |
494 | ||
ce57ea75 | 495 | reg0[0] <-> vlan.present; => Predicate symbol vlan.present used where lvalue required. |
a20c96c6 BP |
496 | reg0 <-> reg1[0..10]; => Can't exchange 32-bit field with 11-bit field. |
497 | inport <-> reg0; => Can't exchange string field (inport) with integer field (reg0). | |
498 | inport <-> big_string; => String fields inport and big_string are incompatible for exchange. | |
499 | ip.proto <-> reg0[0..7]; => Field ip.proto is not modifiable. | |
500 | reg0[0..7] <-> ip.proto; => Field ip.proto is not modifiable. | |
5f822129 BP |
501 | |
502 | # TTL decrement. | |
503 | ip.ttl--; => actions=dec_ttl, prereqs=ip | |
47f3b59b | 504 | ip.ttl => Syntax error at end of input expecting `--'. |
5f822129 BP |
505 | |
506 | # conntrack | |
507 | ct_next; => actions=ct(table=27,zone=NXM_NX_REG5[0..15]), prereqs=ip | |
508 | ct_commit; => actions=ct(commit,zone=NXM_NX_REG5[0..15]), prereqs=ip | |
509 | ||
6335d074 BP |
510 | # arp |
511 | arp { eth.dst = ff:ff:ff:ff:ff:ff; output; }; => actions=controller(userdata=00.00.00.00.00.00.00.00.00.19.00.10.80.00.06.06.ff.ff.ff.ff.ff.ff.00.00.ff.ff.00.10.00.00.23.20.00.0e.ff.f8.40.00.00.00), prereqs=ip4 | |
512 | ||
0bac7164 BP |
513 | # get_arp |
514 | get_arp(outport, ip4.dst); => actions=push:NXM_NX_REG0[],push:NXM_OF_IP_DST[],pop:NXM_NX_REG0[],set_field:00:00:00:00:00:00->eth_dst,resubmit(,65),pop:NXM_NX_REG0[], prereqs=eth.type == 0x800 | |
515 | get_arp(inport, reg0); => actions=push:NXM_NX_REG7[],push:NXM_NX_REG0[],push:OXM_OF_PKT_REG0[32..63],push:NXM_NX_REG6[],pop:NXM_NX_REG7[],pop:NXM_NX_REG0[],set_field:00:00:00:00:00:00->eth_dst,resubmit(,65),pop:NXM_NX_REG0[],pop:NXM_NX_REG7[], prereqs=1 | |
516 | get_arp; => Syntax error at `;' expecting `('. | |
517 | get_arp(); => Syntax error at `)' expecting field name. | |
518 | get_arp(inport); => Syntax error at `)' expecting `,'. | |
519 | get_arp(inport ip4.dst); => Syntax error at `ip4.dst' expecting `,'. | |
520 | get_arp(inport, ip4.dst; => Syntax error at `;' expecting `)'. | |
521 | get_arp(inport, eth.dst); => Cannot use 48-bit field eth.dst[0..47] where 32-bit field is required. | |
522 | get_arp(inport, outport); => Cannot use string field outport where numeric field is required. | |
523 | get_arp(reg0, ip4.dst); => Cannot use numeric field reg0 where string field is required. | |
524 | ||
525 | # put_arp | |
526 | put_arp(inport, arp.spa, arp.sha); => actions=push:NXM_NX_REG0[],push:NXM_OF_ETH_SRC[],push:NXM_NX_ARP_SHA[],push:NXM_OF_ARP_SPA[],pop:NXM_NX_REG0[],pop:NXM_OF_ETH_SRC[],controller(userdata=00.00.00.01.00.00.00.00),pop:NXM_OF_ETH_SRC[],pop:NXM_NX_REG0[], prereqs=eth.type == 0x806 && eth.type == 0x806 | |
527 | ||
5f822129 BP |
528 | # Contradictionary prerequisites (allowed but not useful): |
529 | ip4.src = ip6.src[0..31]; => actions=move:NXM_NX_IPV6_SRC[0..31]->NXM_OF_IP_SRC[], prereqs=eth.type == 0x800 && eth.type == 0x86dd | |
530 | ip4.src <-> ip6.src[0..31]; => actions=push:NXM_NX_IPV6_SRC[0..31],push:NXM_OF_IP_SRC[],pop:NXM_NX_IPV6_SRC[0..31],pop:NXM_OF_IP_SRC[], prereqs=eth.type == 0x800 && eth.type == 0x86dd | |
531 | ||
532 | ## Miscellaneous negative tests. | |
533 | ; => Syntax error at `;'. | |
534 | xyzzy; => Syntax error at `xyzzy' expecting action. | |
535 | next; 123; => Syntax error at `123'. | |
536 | next; xyzzy; => Syntax error at `xyzzy' expecting action. | |
537 | next => Syntax error at end of input expecting ';'. | |
3b7cb7e1 BP |
538 | ]]) |
539 | sed 's/ =>.*//' test-cases.txt > input.txt | |
540 | sed 's/.* => //' test-cases.txt > expout | |
541 | AT_CHECK([ovstest test-ovn parse-actions < input.txt], [0], [expout]) | |
542 | AT_CLEANUP | |
f295c17b BP |
543 | |
544 | AT_BANNER([OVN end-to-end tests]) | |
545 | ||
9975d7be BP |
546 | # 3 hypervisors, one logical switch, 3 logical ports per hypervisor |
547 | AT_SETUP([ovn -- 3 HVs, 1 LS, 3 lports/HV]) | |
57d143eb | 548 | AT_KEYWORDS([ovnarp]) |
f295c17b BP |
549 | AT_SKIP_IF([test $HAVE_PYTHON = no]) |
550 | ovn_start | |
551 | ||
552 | # Create hypervisors hv[123]. | |
9975d7be | 553 | # Add vif1[123] to hv1, vif2[123] to hv2, vif3[123] to hv3. |
f295c17b BP |
554 | # Add all of the vifs to a single logical switch lsw0. |
555 | # Turn on port security on all the vifs except vif[123]1. | |
556 | # Make vif13, vif2[23], vif3[123] destinations for unknown MACs. | |
557 | # Add some ACLs for Ethertypes 1234, 1235, 1236. | |
558 | ovn-nbctl lswitch-add lsw0 | |
559 | net_add n1 | |
560 | for i in 1 2 3; do | |
561 | sim_add hv$i | |
562 | as hv$i | |
563 | ovs-vsctl add-br br-phys | |
564 | ovn_attach n1 br-phys 192.168.0.$i | |
565 | ||
566 | for j in 1 2 3; do | |
567 | ovs-vsctl add-port br-int vif$i$j -- set Interface vif$i$j external-ids:iface-id=lp$i$j options:tx_pcap=hv$i/vif$i$j-tx.pcap options:rxq_pcap=hv$i/vif$i$j-rx.pcap ofport-request=$i$j | |
568 | ovn-nbctl lport-add lsw0 lp$i$j | |
4d5c43d5 | 569 | if test $j = 1; then |
57d143eb | 570 | ovn-nbctl lport-set-addresses lp$i$j "f0:00:00:00:00:$i$j 192.168.0.$i$j" unknown |
f295c17b | 571 | else |
7dc88496 NS |
572 | if test $j = 3; then |
573 | ip_addrs="192.168.0.$i$j fe80::ea2a:eaff:fe28:$i$j/64 192.169.0.$i$j" | |
574 | else | |
575 | ip_addrs="192.168.0.$i$j" | |
576 | fi | |
577 | ovn-nbctl lport-set-addresses lp$i$j "f0:00:00:00:00:$i$j $ip_addrs" | |
f295c17b BP |
578 | ovn-nbctl lport-set-port-security lp$i$j f0:00:00:00:00:$i$j |
579 | fi | |
580 | done | |
581 | done | |
582 | ovn-nbctl acl-add lsw0 from-lport 1000 'eth.type == 0x1234' drop | |
583 | ovn-nbctl acl-add lsw0 from-lport 1000 'eth.type == 0x1235 && inport == "lp11"' drop | |
584 | ovn-nbctl acl-add lsw0 to-lport 1000 'eth.type == 0x1236 && outport == "lp33"' drop | |
585 | ||
586 | # Pre-populate the hypervisors' ARP tables so that we don't lose any | |
587 | # packets for ARP resolution (native tunneling doesn't queue packets | |
588 | # for ARP resolution). | |
589 | ovn_populate_arp | |
590 | ||
591 | # Allow some time for ovn-northd and ovn-controller to catch up. | |
592 | # XXX This should be more systematic. | |
593 | sleep 1 | |
611099dc | 594 | |
57d143eb HZ |
595 | # Given the name of a logical port, prints the name of the hypervisor |
596 | # on which it is located. | |
597 | vif_to_hv() { | |
598 | echo hv${1%?} | |
599 | } | |
600 | ||
f295c17b BP |
601 | # test_packet INPORT DST SRC ETHTYPE OUTPORT... |
602 | # | |
603 | # This shell function causes a packet to be received on INPORT. The packet's | |
604 | # content has Ethernet destination DST and source SRC (each exactly 12 hex | |
605 | # digits) and Ethernet type ETHTYPE (4 hex digits). The OUTPORTs (zero or | |
606 | # more) list the VIFs on which the packet should be received. INPORT and the | |
607 | # OUTPORTs are specified as lport numbers, e.g. 11 for vif11. | |
608 | trim_zeros() { | |
609 | sed 's/\(00\)\{1,\}$//' | |
610 | } | |
611 | for i in 1 2 3; do | |
612 | for j in 1 2 3; do | |
613 | : > $i$j.expected | |
614 | done | |
615 | done | |
616 | test_packet() { | |
617 | local inport=$1 packet=$2$3$4; shift; shift; shift; shift | |
57d143eb | 618 | hv=`vif_to_hv $inport` |
f295c17b BP |
619 | vif=vif$inport |
620 | as $hv ovs-appctl netdev-dummy/receive $vif $packet | |
621 | for outport; do | |
622 | echo $packet | trim_zeros >> $outport.expected | |
623 | done | |
624 | } | |
625 | ||
57d143eb HZ |
626 | # test_arp INPORT SHA SPA TPA [REPLY_HA] |
627 | # | |
628 | # Causes a packet to be received on INPORT. The packet is an ARP | |
629 | # request with SHA, SPA, and TPA as specified. If REPLY_HA is provided, then | |
630 | # it should be the hardware address of the target to expect to receive in an | |
631 | # ARP reply; otherwise no reply is expected. | |
632 | # | |
633 | # INPORT is an lport number, e.g. 11 for vif11. | |
634 | # SHA and REPLY_HA are each 12 hex digits. | |
635 | # SPA and TPA are each 8 hex digits. | |
636 | test_arp() { | |
637 | local inport=$1 sha=$2 spa=$3 tpa=$4 reply_ha=$5 | |
638 | local request=ffffffffffff${sha}08060001080006040001${sha}${spa}ffffffffffff${tpa} | |
639 | hv=`vif_to_hv $inport` | |
640 | as $hv ovs-appctl netdev-dummy/receive vif$inport $request | |
641 | ||
92f9822b | 642 | if test X$reply_ha = X; then |
57d143eb HZ |
643 | # Expect to receive the broadcast ARP on the other logical switch ports |
644 | # if no reply is expected. | |
645 | local i j | |
646 | for i in 1 2 3; do | |
647 | for j in 1 2 3; do | |
648 | if test $i$j != $inport; then | |
649 | echo $request >> $i$j.expected | |
650 | fi | |
651 | done | |
652 | done | |
653 | else | |
654 | # Expect to receive the reply, if any. | |
655 | local reply=${sha}${reply_ha}08060001080006040002${reply_ha}${tpa}${sha}${spa} | |
656 | echo $reply >> $inport.expected | |
657 | fi | |
658 | } | |
659 | ||
660 | ip_to_hex() { | |
661 | printf "%02x%02x%02x%02x" "$@" | |
662 | } | |
663 | ||
f295c17b BP |
664 | # Send packets between all pairs of source and destination ports: |
665 | # | |
666 | # 1. Unicast packets are delivered to exactly one lport (except that packets | |
667 | # destined to their input ports are dropped). | |
668 | # | |
669 | # 2. Broadcast and multicast are delivered to all lports except the input port. | |
670 | # | |
671 | # 3. When port security is turned on, the lswitch drops packets from the wrong | |
672 | # MAC address. | |
673 | # | |
674 | # 4. The lswitch drops all packets with a VLAN tag. | |
675 | # | |
676 | # 5. The lswitch drops all packets with a multicast source address. (This only | |
677 | # affects behavior when port security is turned off, since otherwise port | |
678 | # security would drop the packet anyway.) | |
679 | # | |
680 | # 6. The lswitch delivers packets with an unknown destination to lports with | |
681 | # "unknown" among their MAC addresses (and port security disabled). | |
682 | # | |
683 | # 7. The lswitch drops unicast packets that violate an ACL. | |
684 | # | |
685 | # 8. The lswitch drops multicast and broadcast packets that violate an ACL. | |
57d143eb HZ |
686 | # |
687 | # 9. ARP requests to known IPs are responded directly. | |
688 | # | |
689 | # 10. No response to ARP requests for unknown IPs. | |
f295c17b BP |
690 | for is in 1 2 3; do |
691 | for js in 1 2 3; do | |
692 | s=$is$js | |
693 | bcast= | |
4d5c43d5 JP |
694 | unknown= |
695 | bacl2= | |
696 | bacl3= | |
f295c17b BP |
697 | for id in 1 2 3; do |
698 | for jd in 1 2 3; do | |
699 | d=$id$jd | |
700 | ||
701 | if test $d != $s; then unicast=$d; else unicast=; fi | |
702 | test_packet $s f000000000$d f000000000$s $s$d $unicast #1 | |
703 | ||
704 | if test $d != $s && test $js = 1; then | |
4d5c43d5 JP |
705 | impersonate=$d |
706 | else | |
707 | impersonate= | |
708 | fi | |
f295c17b BP |
709 | test_packet $s f000000000$d f00000000055 55$d $impersonate #3 |
710 | ||
4d5c43d5 JP |
711 | if test $d != $s && test $s != 11; then acl2=$d; else acl2=; fi |
712 | if test $d != $s && test $d != 33; then acl3=$d; else acl3=; fi | |
f295c17b BP |
713 | test_packet $s f000000000$d f000000000$s 1234 #7, acl1 |
714 | test_packet $s f000000000$d f000000000$s 1235 $acl2 #7, acl2 | |
715 | test_packet $s f000000000$d f000000000$s 1236 $acl3 #7, acl3 | |
716 | ||
717 | test_packet $s f000000000$d f00000000055 810000091234 #4 | |
718 | test_packet $s f000000000$d 0100000000$s $s$d #5 | |
719 | ||
4d5c43d5 JP |
720 | if test $d != $s && test $jd = 1; then |
721 | unknown="$unknown $d" | |
722 | fi | |
f295c17b BP |
723 | bcast="$bcast $unicast" |
724 | bacl2="$bacl2 $acl2" | |
725 | bacl3="$bacl3 $acl3" | |
57d143eb HZ |
726 | |
727 | sip=`ip_to_hex 192 168 0 $i$j` | |
728 | tip=`ip_to_hex 192 168 0 $id$jd` | |
729 | tip_unknown=`ip_to_hex 11 11 11 11` | |
730 | test_arp $s f000000000$s $sip $tip f000000000$d #9 | |
731 | test_arp $s f000000000$s $sip $tip_unknown #10 | |
7dc88496 NS |
732 | |
733 | if test $jd = 3; then | |
734 | # lport[123]3 has an additional ip 192.169.0.[123]3. | |
735 | tip=`ip_to_hex 192 169 0 $id$jd` | |
736 | test_arp $s f000000000$s $sip $tip f000000000$d #9 | |
737 | fi | |
f295c17b BP |
738 | done |
739 | done | |
740 | ||
4d5c43d5 | 741 | # Broadcast and multicast. |
f295c17b BP |
742 | test_packet $s ffffffffffff f000000000$s ${s}ff $bcast #2 |
743 | test_packet $s 010000000000 f000000000$s ${s}ff $bcast #2 | |
4d5c43d5 | 744 | if test $js = 1; then |
f295c17b BP |
745 | bcast_impersonate=$bcast |
746 | else | |
4d5c43d5 JP |
747 | bcast_impersonate= |
748 | fi | |
f295c17b BP |
749 | test_packet $s 010000000000 f00000000044 44ff $bcast_impersonate #3 |
750 | ||
751 | test_packet $s f0000000ffff f000000000$s ${s}66 $unknown #6 | |
752 | ||
753 | test_packet $s ffffffffffff f000000000$s 1234 #8, acl1 | |
754 | test_packet $s ffffffffffff f000000000$s 1235 $bacl2 #8, acl2 | |
755 | test_packet $s ffffffffffff f000000000$s 1236 $bacl3 #8, acl3 | |
756 | test_packet $s 010000000000 f000000000$s 1234 #8, acl1 | |
757 | test_packet $s 010000000000 f000000000$s 1235 $bacl2 #8, acl2 | |
758 | test_packet $s 010000000000 f000000000$s 1236 $bacl3 #8, acl3 | |
759 | done | |
760 | done | |
761 | ||
7dc88496 NS |
762 | # set address for lp13 with invalid characters. |
763 | # lp13 should be configured with only 192.168.0.13. | |
764 | ovn-nbctl lport-set-addresses lp13 "f0:00:00:00:00:13 192.168.0.13 invalid 192.169.0.13" | |
765 | sip=`ip_to_hex 192 168 0 11` | |
766 | tip=`ip_to_hex 192 168 0 13` | |
767 | test_arp 11 f00000000011 $sip $tip f00000000013 | |
768 | ||
769 | tip=`ip_to_hex 192 169 0 13` | |
770 | #arp request for 192.169.0.13 should be flooded | |
771 | test_arp 11 f00000000011 $sip $tip | |
772 | ||
f295c17b BP |
773 | # Allow some time for packet forwarding. |
774 | # XXX This can be improved. | |
775 | sleep 1 | |
776 | ||
91125642 | 777 | # dump information and flows with counters |
bb0c41d3 RM |
778 | ovn-sbctl dump-flows -- list multicast_group |
779 | ||
780 | echo "------ hv1 dump ------" | |
781 | as hv1 ovs-vsctl show | |
782 | as hv1 ovs-ofctl -O OpenFlow13 dump-flows br-int | |
783 | ||
784 | echo "------ hv2 dump ------" | |
785 | as hv2 ovs-vsctl show | |
786 | as hv2 ovs-ofctl -O OpenFlow13 dump-flows br-int | |
787 | ||
788 | echo "------ hv3 dump ------" | |
789 | as hv3 ovs-vsctl show | |
790 | as hv3 ovs-ofctl -O OpenFlow13 dump-flows br-int | |
f295c17b BP |
791 | # Now check the packets actually received against the ones expected. |
792 | for i in 1 2 3; do | |
793 | for j in 1 2 3; do | |
794 | file=hv$i/vif$i$j-tx.pcap | |
795 | echo $file | |
796 | $PYTHON "$top_srcdir/utilities/ovs-pcap.in" $file | trim_zeros > $i$j.packets | |
2172f32d YT |
797 | sort $i$j.expected > expout |
798 | AT_CHECK([sort $i$j.packets], [0], [expout]) | |
f295c17b BP |
799 | echo |
800 | done | |
801 | done | |
fcde56f5 LR |
802 | |
803 | # Gracefully terminate daemons | |
d9c8c57c LR |
804 | for sim in hv1 hv2 hv3; do |
805 | as $sim | |
806 | OVS_APP_EXIT_AND_WAIT([ovn-controller]) | |
807 | OVS_APP_EXIT_AND_WAIT([ovs-vswitchd]) | |
808 | OVS_APP_EXIT_AND_WAIT([ovsdb-server]) | |
fcde56f5 | 809 | done |
d9c8c57c LR |
810 | |
811 | as ovn-sb | |
812 | OVS_APP_EXIT_AND_WAIT([ovsdb-server]) | |
813 | ||
814 | as ovn-nb | |
815 | OVS_APP_EXIT_AND_WAIT([ovsdb-server]) | |
816 | ||
817 | as northd | |
818 | OVS_APP_EXIT_AND_WAIT([ovn-northd]) | |
819 | ||
820 | as main | |
821 | OVS_APP_EXIT_AND_WAIT([ovs-vswitchd]) | |
822 | OVS_APP_EXIT_AND_WAIT([ovsdb-server]) | |
823 | ||
f295c17b | 824 | AT_CLEANUP |
eb6b08eb | 825 | |
7277bc83 RB |
826 | # 2 hypervisors, 4 logical ports per HV |
827 | # 2 locally attached networks (one flat, one vlan tagged over same device) | |
828 | # 2 ports per HV on each network | |
e90aeb57 | 829 | AT_SETUP([ovn -- 2 HVs, 4 lports/HV, localnet ports]) |
d79fc5f4 RB |
830 | AT_KEYWORDS([ovn-localnet]) |
831 | AT_SKIP_IF([test $HAVE_PYTHON = no]) | |
832 | ovn_start | |
833 | ||
0ee7f7f1 HZ |
834 | # In this test cases we create 3 lswitches, all connected to same |
835 | # physical network (through br-phys on each HV). Each lswitch has | |
836 | # VIF ports across 2 HVs. Each HV has 5 VIF ports. The first digit | |
837 | # of VIF port name indicates the hypervisor it is bound to, e.g. | |
838 | # lp23 means VIF 3 on hv2. | |
839 | # | |
840 | # lswitch's VLAN tag and their lports are: | |
841 | # - ls1: | |
842 | # - untagged | |
843 | # - lports: lp11, lp12, lp21, lp22 | |
844 | # | |
845 | # - ls2: | |
846 | # - tagged with VLAN 101 | |
847 | # - lports: lp13, lp14, lp23, lp24 | |
848 | # - ls3: | |
849 | # - untagged | |
850 | # - lports: lp15, lp25 | |
851 | # | |
852 | # Note: a localnet port is created for each lswitch to connect to | |
853 | # physical network. | |
854 | ||
855 | for i in 1 2 3; do | |
856 | lswitch_name=ls$i | |
857 | ovn-nbctl lswitch-add $lswitch_name | |
858 | ln_port_name=ln$i | |
859 | if test $i -eq 2; then | |
860 | ovn-nbctl lport-add $lswitch_name $ln_port_name "" 101 | |
861 | else | |
862 | ovn-nbctl lport-add $lswitch_name $ln_port_name | |
863 | fi | |
864 | ovn-nbctl lport-set-addresses $ln_port_name unknown | |
865 | ovn-nbctl lport-set-type $ln_port_name localnet | |
866 | ovn-nbctl lport-set-options $ln_port_name network_name=phys | |
867 | done | |
d79fc5f4 RB |
868 | |
869 | net_add n1 | |
870 | for i in 1 2; do | |
871 | sim_add hv$i | |
872 | as hv$i | |
873 | ovs-vsctl add-br br-phys | |
874 | ovs-vsctl set open . external-ids:ovn-bridge-mappings=phys:br-phys | |
875 | ovn_attach n1 br-phys 192.168.0.$i | |
876 | ||
0ee7f7f1 | 877 | for j in 1 2 3 4 5; do |
d79fc5f4 RB |
878 | ovs-vsctl add-port br-int vif$i$j -- \ |
879 | set Interface vif$i$j external-ids:iface-id=lp$i$j \ | |
880 | options:tx_pcap=hv$i/vif$i$j-tx.pcap \ | |
881 | options:rxq_pcap=hv$i/vif$i$j-rx.pcap \ | |
882 | ofport-request=$i$j | |
883 | ||
d79fc5f4 | 884 | lport_name=lp$i$j |
7277bc83 | 885 | if test $j -le 2; then |
0ee7f7f1 HZ |
886 | lswitch_name=ls1 |
887 | elif test $j -le 4; then | |
888 | lswitch_name=ls2 | |
d79fc5f4 | 889 | else |
0ee7f7f1 | 890 | lswitch_name=ls3 |
d79fc5f4 | 891 | fi |
d79fc5f4 RB |
892 | |
893 | ovn-nbctl lport-add $lswitch_name $lport_name | |
894 | ovn-nbctl lport-set-addresses $lport_name f0:00:00:00:00:$i$j | |
895 | ovn-nbctl lport-set-port-security $lport_name f0:00:00:00:00:$i$j | |
896 | ||
897 | OVS_WAIT_UNTIL([test x`ovn-nbctl lport-get-up $lport_name` = xup]) | |
898 | done | |
899 | done | |
900 | ||
901 | ovn_populate_arp | |
902 | ||
903 | # XXX This is now the 3rd copy of these functions in this file ... | |
904 | ||
905 | # Given the name of a logical port, prints the name of the hypervisor | |
906 | # on which it is located. | |
907 | vif_to_hv() { | |
908 | echo hv${1%?} | |
909 | } | |
910 | # | |
911 | # test_packet INPORT DST SRC ETHTYPE OUTPORT... | |
912 | # | |
913 | # This shell function causes a packet to be received on INPORT. The packet's | |
914 | # content has Ethernet destination DST and source SRC (each exactly 12 hex | |
915 | # digits) and Ethernet type ETHTYPE (4 hex digits). The OUTPORTs (zero or | |
916 | # more) list the VIFs on which the packet should be received. INPORT and the | |
917 | # OUTPORTs are specified as lport numbers, e.g. 11 for vif11. | |
918 | trim_zeros() { | |
919 | sed 's/\(00\)\{1,\}$//' | |
920 | } | |
921 | for i in 1 2; do | |
0ee7f7f1 | 922 | for j in 1 2 3 4 5; do |
d79fc5f4 RB |
923 | : > $i$j.expected |
924 | done | |
925 | done | |
926 | test_packet() { | |
927 | local inport=$1 src=$2 dst=$3 eth=$4; shift; shift; shift; shift | |
928 | local packet=${src}${dst}${eth} | |
929 | hv=`vif_to_hv $inport` | |
930 | vif=vif$inport | |
931 | as $hv ovs-appctl netdev-dummy/receive $vif $packet | |
932 | for outport; do | |
933 | echo $packet | trim_zeros >> $outport.expected | |
934 | done | |
935 | } | |
936 | ||
7277bc83 RB |
937 | # lp11 and lp21 are on the same network (phys, untagged) |
938 | # and on different hypervisors | |
d79fc5f4 RB |
939 | test_packet 11 f00000000021 f00000000011 1121 21 |
940 | test_packet 21 f00000000011 f00000000021 2111 11 | |
941 | ||
7277bc83 RB |
942 | # lp11 and lp12 are on the same network (phys, untagged) |
943 | # and on the same hypervisor | |
e90aeb57 RB |
944 | test_packet 11 f00000000012 f00000000011 1112 12 |
945 | test_packet 12 f00000000011 f00000000012 1211 11 | |
7277bc83 RB |
946 | |
947 | # lp13 and lp23 are on the same network (phys, VLAN 101) | |
948 | # and on different hypervisors | |
949 | test_packet 13 f00000000023 f00000000013 1323 23 | |
950 | test_packet 23 f00000000013 f00000000023 2313 13 | |
951 | ||
952 | # lp13 and lp14 are on the same network (phys, VLAN 101) | |
953 | # and on the same hypervisor | |
e90aeb57 RB |
954 | test_packet 13 f00000000014 f00000000013 1314 14 |
955 | test_packet 14 f00000000013 f00000000014 1413 13 | |
d79fc5f4 | 956 | |
0ee7f7f1 HZ |
957 | # lp11 and lp15 are on the same network (phys, untagged), |
958 | # same hypervisor, and on different lswitches | |
959 | test_packet 11 f00000000015 f00000000011 1115 15 | |
960 | test_packet 15 f00000000011 f00000000015 1511 11 | |
961 | ||
962 | # lp11 and lp25 are on the same network (phys, untagged), | |
963 | # different hypervisors, and on different lswitches | |
964 | test_packet 11 f00000000025 f00000000011 1125 25 | |
965 | test_packet 25 f00000000011 f00000000025 2511 11 | |
966 | ||
d79fc5f4 | 967 | # Ports that should not be able to communicate |
7277bc83 RB |
968 | test_packet 11 f00000000013 f00000000011 1113 |
969 | test_packet 11 f00000000023 f00000000011 1123 | |
970 | test_packet 21 f00000000013 f00000000021 2113 | |
971 | test_packet 21 f00000000023 f00000000021 2123 | |
972 | test_packet 13 f00000000011 f00000000013 1311 | |
973 | test_packet 13 f00000000021 f00000000013 1321 | |
974 | test_packet 23 f00000000011 f00000000023 2311 | |
975 | test_packet 23 f00000000021 f00000000023 2321 | |
d79fc5f4 RB |
976 | |
977 | # Allow some time for packet forwarding. | |
978 | # XXX This can be improved. | |
979 | sleep 1 | |
980 | ||
981 | # Dump a bunch of info helpful for debugging if there's a failure. | |
982 | ||
983 | echo "------ OVN dump ------" | |
984 | ovn-nbctl show | |
985 | ovn-sbctl show | |
986 | ||
987 | echo "------ hv1 dump ------" | |
988 | as hv1 ovs-vsctl show | |
989 | as hv1 ovs-ofctl -O OpenFlow13 dump-flows br-int | |
990 | ||
991 | echo "------ hv2 dump ------" | |
992 | as hv2 ovs-vsctl show | |
993 | as hv2 ovs-ofctl -O OpenFlow13 dump-flows br-int | |
994 | ||
995 | # Now check the packets actually received against the ones expected. | |
996 | for i in 1 2; do | |
0ee7f7f1 | 997 | for j in 1 2 3 4 5; do |
d79fc5f4 RB |
998 | file=hv$i/vif$i$j-tx.pcap |
999 | echo $file | |
1000 | $PYTHON "$top_srcdir/utilities/ovs-pcap.in" $file | trim_zeros > $i$j.packets | |
1001 | sort $i$j.expected > expout | |
1002 | AT_CHECK([sort $i$j.packets], [0], [expout]) | |
1003 | echo | |
1004 | done | |
1005 | done | |
1006 | ||
fcde56f5 | 1007 | # Gracefully terminate daemons |
d9c8c57c LR |
1008 | for sim in hv1 hv2; do |
1009 | as $sim | |
1010 | OVS_APP_EXIT_AND_WAIT([ovn-controller]) | |
1011 | OVS_APP_EXIT_AND_WAIT([ovs-vswitchd]) | |
1012 | OVS_APP_EXIT_AND_WAIT([ovsdb-server]) | |
fcde56f5 | 1013 | done |
d9c8c57c LR |
1014 | |
1015 | as ovn-sb | |
1016 | OVS_APP_EXIT_AND_WAIT([ovsdb-server]) | |
1017 | ||
1018 | as ovn-nb | |
1019 | OVS_APP_EXIT_AND_WAIT([ovsdb-server]) | |
1020 | ||
1021 | as northd | |
1022 | OVS_APP_EXIT_AND_WAIT([ovn-northd]) | |
1023 | ||
1024 | as main | |
1025 | OVS_APP_EXIT_AND_WAIT([ovs-vswitchd]) | |
1026 | OVS_APP_EXIT_AND_WAIT([ovsdb-server]) | |
d79fc5f4 RB |
1027 | AT_CLEANUP |
1028 | ||
91125642 FF |
1029 | AT_SETUP([ovn -- vtep: 3 HVs, 1 VIFs/HV, 1 GW, 1 LS]) |
1030 | AT_KEYWORDS([vtep]) | |
eb6b08eb JP |
1031 | AT_SKIP_IF([test $HAVE_PYTHON = no]) |
1032 | ovn_start | |
1033 | ||
1034 | # Configure the Northbound database | |
1035 | ovn-nbctl lswitch-add lsw0 | |
1036 | ||
1037 | ovn-nbctl lport-add lsw0 lp1 | |
2fa326a3 | 1038 | ovn-nbctl lport-set-addresses lp1 f0:00:00:00:00:01 |
eb6b08eb JP |
1039 | |
1040 | ovn-nbctl lport-add lsw0 lp2 | |
2fa326a3 | 1041 | ovn-nbctl lport-set-addresses lp2 f0:00:00:00:00:02 |
eb6b08eb JP |
1042 | |
1043 | ovn-nbctl lport-add lsw0 lp-vtep | |
1044 | ovn-nbctl lport-set-type lp-vtep vtep | |
1045 | ovn-nbctl lport-set-options lp-vtep vtep-physical-switch=br-vtep vtep-logical-switch=lsw0 | |
2fa326a3 | 1046 | ovn-nbctl lport-set-addresses lp-vtep unknown |
eb6b08eb JP |
1047 | |
1048 | net_add n1 # Network to connect hv1, hv2, and vtep | |
1049 | net_add n2 # Network to connect vtep and hv3 | |
1050 | ||
1051 | # Create hypervisor hv1 connected to n1 | |
1052 | sim_add hv1 | |
1053 | as hv1 | |
1054 | ovs-vsctl add-br br-phys | |
1055 | ovn_attach n1 br-phys 192.168.0.1 | |
1056 | ovs-vsctl add-port br-int vif1 -- set Interface vif1 external-ids:iface-id=lp1 options:tx_pcap=hv1/vif1-tx.pcap options:rxq_pcap=hv1/vif1-rx.pcap ofport-request=1 | |
1057 | ||
1058 | # Create hypervisor hv2 connected to n1 | |
1059 | sim_add hv2 | |
1060 | as hv2 | |
1061 | ovs-vsctl add-br br-phys | |
1062 | ovn_attach n1 br-phys 192.168.0.2 | |
1063 | ovs-vsctl add-port br-int vif2 -- set Interface vif2 external-ids:iface-id=lp2 options:tx_pcap=hv2/vif2-tx.pcap options:rxq_pcap=hv2/vif2-rx.pcap ofport-request=1 | |
1064 | ||
1065 | ||
1066 | # Start the vtep emulator with a leg in both networks | |
1067 | sim_add vtep | |
1068 | as vtep | |
1069 | ||
1070 | ovsdb-tool create "$ovs_base"/vtep/vtep.db "$abs_top_srcdir"/vtep/vtep.ovsschema || return 1 | |
1071 | ovs-appctl -t ovsdb-server ovsdb-server/add-db "$ovs_base"/vtep/vtep.db | |
1072 | ||
1073 | ovs-vsctl add-br br-phys | |
1074 | net_attach n1 br-phys | |
1075 | ||
1076 | mac=`ovs-vsctl get Interface br-phys mac_in_use | sed s/\"//g` | |
1077 | arp_table="$arp_table $sandbox,br-phys,192.168.0.3,$mac" | |
1078 | ovs-appctl netdev-dummy/ip4addr br-phys 192.168.0.3/24 >/dev/null || return 1 | |
1079 | ovs-appctl ovs/route/add 192.168.0.3/24 br-phys >/dev/null || return 1 | |
1080 | ||
1081 | ovs-vsctl add-br br-vtep | |
1082 | net_attach n2 br-vtep | |
1083 | ||
1084 | vtep-ctl add-ps br-vtep | |
1085 | vtep-ctl set Physical_Switch br-vtep tunnel_ips=192.168.0.3 | |
1086 | vtep-ctl add-ls lsw0 | |
1087 | ||
1088 | start_daemon ovs-vtep br-vtep | |
1089 | start_daemon ovn-controller-vtep --vtep-db=unix:"$ovs_base"/vtep/db.sock --ovnsb-db=unix:"$ovs_base"/ovn-sb/ovn-sb.sock | |
1090 | ||
1091 | sleep 1 | |
1092 | ||
1093 | vtep-ctl bind-ls br-vtep br-vtep_n2 0 lsw0 | |
1094 | ||
1095 | sleep 1 | |
1096 | ||
1097 | # Add hv3 on the other side of the vtep | |
1098 | sim_add hv3 | |
1099 | as hv3 | |
1100 | ovs-vsctl add-br br-phys | |
1101 | net_attach n2 br-phys | |
1102 | ||
1103 | ovs-vsctl add-port br-phys vif3 -- set Interface vif3 options:tx_pcap=hv3/vif3-tx.pcap options:rxq_pcap=hv3/vif3-rx.pcap ofport-request=1 | |
1104 | ||
1105 | # Pre-populate the hypervisors' ARP tables so that we don't lose any | |
1106 | # packets for ARP resolution (native tunneling doesn't queue packets | |
1107 | # for ARP resolution). | |
1108 | ovn_populate_arp | |
1109 | ||
1110 | # Allow some time for ovn-northd and ovn-controller to catch up. | |
1111 | # XXX This should be more systematic. | |
1112 | sleep 1 | |
6977df72 | 1113 | |
eb6b08eb JP |
1114 | # test_packet INPORT DST SRC ETHTYPE OUTPORT... |
1115 | # | |
1116 | # This shell function causes a packet to be received on INPORT. The packet's | |
1117 | # content has Ethernet destination DST and source SRC (each exactly 12 hex | |
1118 | # digits) and Ethernet type ETHTYPE (4 hex digits). The OUTPORTs (zero or | |
1119 | # more) list the VIFs on which the packet should be received. INPORT and the | |
1120 | # OUTPORTs are specified as lport numbers, e.g. 1 for vif1. | |
1121 | trim_zeros() { | |
1122 | sed 's/\(00\)\{1,\}$//' | |
1123 | } | |
1124 | for i in 1 2 3; do | |
1125 | : > $i.expected | |
1126 | done | |
1127 | test_packet() { | |
1128 | local inport=$1 packet=$2$3$4; shift; shift; shift; shift | |
1129 | #hv=hv`echo $inport | sed 's/^\(.\).*/\1/'` | |
1130 | hv=hv$inport | |
1131 | vif=vif$inport | |
1132 | as $hv ovs-appctl netdev-dummy/receive $vif $packet | |
1133 | for outport; do | |
1134 | echo $packet | trim_zeros >> $outport.expected | |
1135 | done | |
1136 | } | |
1137 | ||
1138 | # Send packets between all pairs of source and destination ports: | |
1139 | # | |
1140 | # 1. Unicast packets are delivered to exactly one lport (except that packets | |
1141 | # destined to their input ports are dropped). | |
1142 | # | |
1143 | # 2. Broadcast and multicast are delivered to all lports except the input port. | |
1144 | # | |
1145 | # 3. The lswitch delivers packets with an unknown destination to lports with | |
1146 | # "unknown" among their MAC addresses (and port security disabled). | |
1147 | for s in 1 2 3; do | |
1148 | bcast= | |
1149 | unknown= | |
1150 | for d in 1 2 3; do | |
1151 | if test $d != $s; then unicast=$d; else unicast=; fi | |
1152 | test_packet $s f0000000000$d f0000000000$s 00$s$d $unicast #1 | |
1153 | ||
1154 | # The vtep (vif3) is the only one configured for "unknown" | |
1155 | if test $d != $s && test $d = 3; then | |
1156 | unknown="$unknown $d" | |
1157 | fi | |
1158 | bcast="$bcast $unicast" | |
1159 | done | |
1160 | ||
1161 | # Broadcast and multicast. | |
46ed1382 DB |
1162 | test_packet $s ffffffffffff f0000000000$s 0${s}ff $bcast #2 |
1163 | test_packet $s 010000000000 f0000000000$s 0${s}ff $bcast #2 | |
eb6b08eb JP |
1164 | |
1165 | test_packet $s f0000000ffff f0000000000$s 0${s}66 $unknown #3 | |
1166 | done | |
1167 | ||
1168 | # Allow some time for packet forwarding. | |
1169 | # XXX This can be improved. | |
1170 | sleep 1 | |
1171 | ||
bb0c41d3 RM |
1172 | # dump information with counters |
1173 | echo "------ OVN dump ------" | |
1174 | ovn-nbctl show | |
1175 | ovn-sbctl show | |
1176 | ||
1177 | echo "------ hv1 dump ------" | |
1178 | as hv1 ovs-vsctl show | |
6195e2e7 | 1179 | as hv1 ovs-ofctl -O OpenFlow13 show br-int |
bb0c41d3 RM |
1180 | as hv1 ovs-ofctl -O OpenFlow13 dump-flows br-int |
1181 | ||
1182 | echo "------ hv2 dump ------" | |
1183 | as hv2 ovs-vsctl show | |
6195e2e7 | 1184 | as hv2 ovs-ofctl -O OpenFlow13 show br-int |
bb0c41d3 RM |
1185 | as hv2 ovs-ofctl -O OpenFlow13 dump-flows br-int |
1186 | ||
1187 | echo "------ hv3 dump ------" | |
1188 | as hv3 ovs-vsctl show | |
6754e92d FF |
1189 | # note: hv3 has no logical port bind, thus it should not have br-int |
1190 | AT_CHECK([as hv3 ovs-ofctl -O OpenFlow13 show br-int], [1], [], | |
1191 | [ovs-ofctl: br-int is not a bridge or a socket | |
1192 | ]) | |
bb0c41d3 | 1193 | |
eb6b08eb JP |
1194 | # Now check the packets actually received against the ones expected. |
1195 | for i in 1 2 3; do | |
1196 | file=hv$i/vif$i-tx.pcap | |
1197 | echo $file | |
1198 | $PYTHON "$top_srcdir/utilities/ovs-pcap.in" $file | trim_zeros > $i.packets | |
2172f32d YT |
1199 | sort $i.expected > expout |
1200 | AT_CHECK([sort $i.packets], [0], [expout]) | |
eb6b08eb JP |
1201 | echo |
1202 | done | |
fcde56f5 LR |
1203 | |
1204 | # Gracefully terminate daemons | |
d9c8c57c LR |
1205 | as vtep |
1206 | OVS_APP_EXIT_AND_WAIT([ovn-controller-vtep]) | |
1207 | OVS_APP_EXIT_AND_WAIT([ovs-vtep]) | |
1208 | ||
1209 | as hv1 | |
1210 | OVS_APP_EXIT_AND_WAIT([ovn-controller]) | |
1211 | ||
1212 | as hv2 | |
1213 | OVS_APP_EXIT_AND_WAIT([ovn-controller]) | |
1214 | ||
1215 | as ovn-sb | |
1216 | OVS_APP_EXIT_AND_WAIT([ovsdb-server]) | |
1217 | ||
1218 | as ovn-nb | |
1219 | OVS_APP_EXIT_AND_WAIT([ovsdb-server]) | |
1220 | ||
1221 | as northd | |
1222 | OVS_APP_EXIT_AND_WAIT([ovn-northd]) | |
1223 | ||
1224 | for sim in hv1 hv2 hv3 vtep main; do | |
1225 | as $sim | |
1226 | for daemon in ovs-vswitchd ovsdb-server; do | |
1227 | OVS_APP_EXIT_AND_WAIT([$daemon]) | |
1228 | done | |
fcde56f5 | 1229 | done |
eb6b08eb | 1230 | AT_CLEANUP |
9975d7be BP |
1231 | |
1232 | # 3 hypervisors, 3 logical switches with 3 logical ports each, 1 logical router | |
1233 | AT_SETUP([ovn -- 3 HVs, 3 LS, 3 lports/LS, 1 LR]) | |
1234 | AT_SKIP_IF([test $HAVE_PYTHON = no]) | |
1235 | ovn_start | |
1236 | ||
1237 | # Logical network: | |
1238 | # | |
1239 | # Three logical switches ls1, ls2, ls3. | |
86e98048 BP |
1240 | # One logical router lr0 connected to ls[123], |
1241 | # with nine subnets, three per logical switch: | |
1242 | # | |
1243 | # lrp11 on ls1 for subnet 192.168.11.0/24 | |
1244 | # lrp12 on ls1 for subnet 192.168.12.0/24 | |
1245 | # lrp13 on ls1 for subnet 192.168.13.0/24 | |
1246 | # ... | |
1247 | # lrp33 on ls3 for subnet 192.168.33.0/24 | |
1248 | # | |
1249 | # 27 VIFs, 9 per LS, 3 per subnet: lp[123][123][123], where the first two | |
1250 | # digits are the subnet and the last digit distinguishes the VIF. | |
9975d7be | 1251 | for i in 1 2 3; do |
86e98048 | 1252 | ovn-nbctl lswitch-add ls$i |
9975d7be | 1253 | for j in 1 2 3; do |
86e98048 | 1254 | for k in 1 2 3; do |
0bac7164 BP |
1255 | # Add "unknown" to MAC addresses for lp?11, so packets for |
1256 | # MAC-IP bindings discovered via ARP later have somewhere to go. | |
1257 | if test $j$k = 11; then unknown=unknown; else unknown=; fi | |
1258 | ||
86e98048 BP |
1259 | ovn-nbctl \ |
1260 | -- lport-add ls$i lp$i$j$k \ | |
0bac7164 | 1261 | -- lport-set-addresses lp$i$j$k "f0:00:00:00:0$i:$j$k 192.168.$i$j.$k" $unknown |
86e98048 BP |
1262 | done |
1263 | done | |
1264 | done | |
1265 | ||
1266 | ovn-nbctl create Logical_Router name=lr0 | |
1267 | for i in 1 2 3; do | |
1268 | for j in 1 2 3; do | |
1269 | lrp_uuid=`ovn-nbctl \ | |
1270 | -- --id=@lrp create Logical_Router_Port name=lrp$i$j \ | |
1271 | network=192.168.$i$j.254/24 mac='"00:00:00:00:ff:'$i$j'"' \ | |
1272 | -- add Logical_Router lr0 ports @lrp \ | |
1273 | -- lport-add ls$i lrp$i$j-attachment` | |
1274 | ovn-nbctl \ | |
1275 | set Logical_Port lrp$i$j-attachment type=router \ | |
00007447 | 1276 | options:router-port=lrp$i$j \ |
86e98048 | 1277 | addresses='"00:00:00:00:ff:'$i$j'"' |
9975d7be BP |
1278 | done |
1279 | done | |
1280 | ||
57d143eb HZ |
1281 | ovn-nbctl set Logical_Port lrp33-attachment \ |
1282 | addresses='"00:00:00:00:ff:33 192.168.33.254"' | |
1283 | ||
9975d7be BP |
1284 | # Physical network: |
1285 | # | |
1286 | # Three hypervisors hv[123]. | |
86e98048 BP |
1287 | # lp?1[123] spread across hv[123]: lp?11 on hv1, lp?12 on hv2, lp?13 on hv3. |
1288 | # lp?2[123] spread across hv[23]: lp?21 and lp?22 on hv2, lp?23 on hv3. | |
1289 | # lp?3[123] all on hv3. | |
1290 | ||
9975d7be BP |
1291 | |
1292 | # Given the name of a logical port, prints the name of the hypervisor | |
1293 | # on which it is located. | |
1294 | vif_to_hv() { | |
1295 | case $1 in dnl ( | |
86e98048 BP |
1296 | ?11) echo 1 ;; dnl ( |
1297 | ?12 | ?21 | ?22) echo 2 ;; dnl ( | |
1298 | ?13 | ?23 | ?3?) echo 3 ;; | |
9975d7be BP |
1299 | esac |
1300 | } | |
1301 | ||
86e98048 BP |
1302 | # Given the name of a logical port, prints the name of its logical router |
1303 | # port, e.g. "vif_to_lrp 123" yields 12. | |
1304 | vif_to_lrp() { | |
1305 | echo ${1%?} | |
1306 | } | |
1307 | ||
1308 | # Given the name of a logical port, prints the name of its logical | |
1309 | # switch, e.g. "vif_to_ls 123" yields 1. | |
e3393e3f | 1310 | vif_to_ls() { |
86e98048 | 1311 | echo ${1%??} |
e3393e3f BP |
1312 | } |
1313 | ||
9975d7be BP |
1314 | net_add n1 |
1315 | for i in 1 2 3; do | |
1316 | sim_add hv$i | |
1317 | as hv$i | |
1318 | ovs-vsctl add-br br-phys | |
1319 | ovn_attach n1 br-phys 192.168.0.$i | |
1320 | done | |
1321 | for i in 1 2 3; do | |
1322 | for j in 1 2 3; do | |
86e98048 BP |
1323 | for k in 1 2 3; do |
1324 | hv=`vif_to_hv $i$j$k` | |
1325 | as hv$hv ovs-vsctl \ | |
1326 | -- add-port br-int vif$i$j$k \ | |
1327 | -- set Interface vif$i$j$k \ | |
1328 | external-ids:iface-id=lp$i$j$k \ | |
1329 | options:tx_pcap=hv$hv/vif$i$j$k-tx.pcap \ | |
1330 | options:rxq_pcap=hv$hv/vif$i$j$k-rx.pcap \ | |
1331 | ofport-request=$i$j$k | |
1332 | done | |
9975d7be BP |
1333 | done |
1334 | done | |
1335 | ||
1336 | # Pre-populate the hypervisors' ARP tables so that we don't lose any | |
1337 | # packets for ARP resolution (native tunneling doesn't queue packets | |
1338 | # for ARP resolution). | |
1339 | ovn_populate_arp | |
1340 | ||
1341 | # Allow some time for ovn-northd and ovn-controller to catch up. | |
1342 | # XXX This should be more systematic. | |
1343 | sleep 1 | |
1344 | ||
e3393e3f | 1345 | # test_ip INPORT SRC_MAC DST_MAC SRC_IP DST_IP OUTPORT... |
9975d7be BP |
1346 | # |
1347 | # This shell function causes a packet to be received on INPORT. The packet's | |
1348 | # content has Ethernet destination DST and source SRC (each exactly 12 hex | |
1349 | # digits) and Ethernet type ETHTYPE (4 hex digits). The OUTPORTs (zero or | |
1350 | # more) list the VIFs on which the packet should be received. INPORT and the | |
0bac7164 | 1351 | # OUTPORTs are specified as lport numbers, e.g. 123 for vif123. |
9975d7be BP |
1352 | trim_zeros() { |
1353 | sed 's/\(00\)\{1,\}$//' | |
1354 | } | |
1355 | for i in 1 2 3; do | |
1356 | for j in 1 2 3; do | |
86e98048 BP |
1357 | for k in 1 2 3; do |
1358 | : > $i$j$k.expected | |
1359 | done | |
9975d7be BP |
1360 | done |
1361 | done | |
e3393e3f | 1362 | test_ip() { |
9975d7be BP |
1363 | # This packet has bad checksums but logical L3 routing doesn't check. |
1364 | local inport=$1 src_mac=$2 dst_mac=$3 src_ip=$4 dst_ip=$5 | |
ba43992e | 1365 | local packet=${dst_mac}${src_mac}08004500001c0000000040110000${src_ip}${dst_ip}0035111100080000 |
9975d7be BP |
1366 | shift; shift; shift; shift; shift |
1367 | hv=hv`vif_to_hv $inport` | |
1368 | as $hv ovs-appctl netdev-dummy/receive vif$inport $packet | |
1369 | #as $hv ovs-appctl ofproto/trace br-int in_port=$inport $packet | |
86e98048 BP |
1370 | in_ls=`vif_to_ls $inport` |
1371 | in_lrp=`vif_to_lrp $inport` | |
9975d7be | 1372 | for outport; do |
86e98048 BP |
1373 | out_ls=`vif_to_ls $outport` |
1374 | if test $in_ls = $out_ls; then | |
9975d7be BP |
1375 | # Ports on the same logical switch receive exactly the same packet. |
1376 | echo $packet | |
1377 | else | |
1378 | # Routing decrements TTL and updates source and dest MAC | |
1379 | # (and checksum). | |
86e98048 BP |
1380 | out_lrp=`vif_to_lrp $outport` |
1381 | echo f00000000${outport}00000000ff${out_lrp}08004500001c00000000"3f1101"00${src_ip}${dst_ip}0035111100080000 | |
9975d7be BP |
1382 | fi | trim_zeros >> $outport.expected |
1383 | done | |
1384 | } | |
1385 | ||
e3393e3f | 1386 | as hv1 ovs-vsctl --columns=name,ofport list interface |
0bac7164 BP |
1387 | as hv1 ovn-sbctl list port_binding |
1388 | as hv1 ovn-sbctl list datapath_binding | |
9975d7be BP |
1389 | as hv1 ovn-sbctl dump-flows |
1390 | as hv1 ovs-ofctl dump-flows br-int | |
1391 | ||
e3393e3f | 1392 | # Send IP packets between all pairs of source and destination ports: |
9975d7be BP |
1393 | # |
1394 | # 1. Unicast IP packets are delivered to exactly one lport (except | |
1395 | # that packets destined to their input ports are dropped). | |
1396 | # | |
1397 | # 2. Broadcast IP packets are delivered to all lports except the input port. | |
86e98048 BP |
1398 | ip_to_hex() { |
1399 | printf "%02x%02x%02x%02x" "$@" | |
1400 | } | |
9975d7be BP |
1401 | for is in 1 2 3; do |
1402 | for js in 1 2 3; do | |
86e98048 BP |
1403 | for ks in 1 2 3; do |
1404 | bcast= | |
1405 | s=$is$js$ks | |
1406 | smac=f00000000$s | |
1407 | sip=`ip_to_hex 192 168 $is$js $ks` | |
1408 | for id in 1 2 3; do | |
1409 | for jd in 1 2 3; do | |
1410 | for kd in 1 2 3; do | |
1411 | d=$id$jd$kd | |
1412 | dip=`ip_to_hex 192 168 $id$jd $kd` | |
1413 | if test $is = $id; then dmac=f00000000$d; else dmac=00000000ff$is$js; fi | |
1414 | if test $d != $s; then unicast=$d; else unicast=; fi | |
1415 | ||
1416 | test_ip $s $smac $dmac $sip $dip $unicast #1 | |
1417 | ||
1418 | if test $id = $is && test $d != $s; then bcast="$bcast $d"; fi | |
1419 | done | |
1420 | done | |
1421 | done | |
1422 | test_ip $s $smac ffffffffffff $sip ffffffff $bcast #2 | |
9975d7be | 1423 | done |
e3393e3f BP |
1424 | done |
1425 | done | |
1426 | ||
0bac7164 BP |
1427 | # 3. Send an IP packet from every logical port to every other subnet, |
1428 | # to an IP address that does not have a static IP-MAC binding. | |
1429 | # This should generate a broadcast ARP request for the destination | |
1430 | # IP address in the destination subnet. | |
1431 | for is in 1 2 3; do | |
1432 | for js in 1 2 3; do | |
1433 | for ks in 1 2 3; do | |
1434 | s=$is$js$ks | |
1435 | smac=f00000000$s | |
1436 | sip=`ip_to_hex 192 168 $is$js $ks` | |
1437 | for id in 1 2 3; do | |
1438 | for jd in 1 2 3; do | |
1439 | if test $is$js = $id$jd; then | |
1440 | continue | |
1441 | fi | |
1442 | ||
1443 | # Send the packet. | |
1444 | dmac=00000000ff$is$js | |
1445 | # Calculate a 4th octet for the destination that is | |
1446 | # unique per $s, avoids the .1 .2 .3 and .254 IP addresses | |
1447 | # that have static MAC bindings, and fits in the range | |
1448 | # 0-255. | |
1449 | o4=`expr $is '*' 9 + $js '*' 3 + $ks + 10` | |
1450 | dip=`ip_to_hex 192 168 $id$jd $o4` | |
1451 | test_ip $s $smac $dmac $sip $dip | |
1452 | ||
1453 | # Every LP on the destination subnet's lswitch should | |
1454 | # receive the ARP request. | |
1455 | lrmac=00000000ff$id$jd | |
1456 | lrip=`ip_to_hex 192 168 $id$jd 254` | |
1457 | arp=ffffffffffff${lrmac}08060001080006040001${lrmac}${lrip}000000000000${dip} | |
1458 | for jd2 in 1 2 3; do | |
1459 | for kd in 1 2 3; do | |
1460 | echo $arp | trim_zeros >> $id$jd2$kd.expected | |
1461 | done | |
1462 | done | |
1463 | done | |
1464 | done | |
1465 | done | |
1466 | done | |
1467 | done | |
1468 | ||
e3393e3f BP |
1469 | # test_arp INPORT SHA SPA TPA [REPLY_HA] |
1470 | # | |
1471 | # Causes a packet to be received on INPORT. The packet is an ARP | |
1472 | # request with SHA, SPA, and TPA as specified. If REPLY_HA is provided, then | |
1473 | # it should be the hardware address of the target to expect to receive in an | |
1474 | # ARP reply; otherwise no reply is expected. | |
1475 | # | |
1476 | # INPORT is an lport number, e.g. 11 for vif11. | |
1477 | # SHA and REPLY_HA are each 12 hex digits. | |
1478 | # SPA and TPA are each 8 hex digits. | |
1479 | test_arp() { | |
1480 | local inport=$1 sha=$2 spa=$3 tpa=$4 reply_ha=$5 | |
1481 | local request=ffffffffffff${sha}08060001080006040001${sha}${spa}ffffffffffff${tpa} | |
1482 | hv=hv`vif_to_hv $inport` | |
1483 | as $hv ovs-appctl netdev-dummy/receive vif$inport $request | |
1484 | #as $hv ovs-appctl ofproto/trace br-int in_port=$inport $request | |
1485 | ||
57d143eb HZ |
1486 | # Expect to receive the broadcast ARP on the other logical switch ports if |
1487 | # IP address is not configured to the lswitch patch port. | |
e3393e3f | 1488 | local i=`vif_to_ls $inport` |
86e98048 | 1489 | local j k |
e3393e3f | 1490 | for j in 1 2 3; do |
86e98048 | 1491 | for k in 1 2 3; do |
0bac7164 | 1492 | # 192.168.33.254 is configured to the lswitch patch port for lrp33, |
57d143eb HZ |
1493 | # so no ARP flooding expected for it. |
1494 | if test $i$j$k != $inport && test $tpa != `ip_to_hex 192 168 33 254`; then | |
86e98048 BP |
1495 | echo $request >> $i$j$k.expected |
1496 | fi | |
1497 | done | |
e3393e3f BP |
1498 | done |
1499 | ||
1500 | # Expect to receive the reply, if any. | |
1501 | if test X$reply_ha != X; then | |
86e98048 BP |
1502 | lrp=`vif_to_lrp $inport` |
1503 | local reply=${sha}00000000ff${lrp}08060001080006040002${reply_ha}${tpa}${sha}${spa} | |
e3393e3f BP |
1504 | echo $reply >> $inport.expected |
1505 | fi | |
1506 | } | |
1507 | ||
1508 | # Test router replies to ARP requests from all source ports: | |
1509 | # | |
0bac7164 | 1510 | # 4. Router replies to query for its MAC address from port's own IP address. |
e3393e3f | 1511 | # |
0bac7164 | 1512 | # 5. Router replies to query for its MAC address from any random IP address |
e3393e3f BP |
1513 | # in its subnet. |
1514 | # | |
0bac7164 | 1515 | # 6. Router replies to query for its MAC address from another subnet. |
e3393e3f | 1516 | # |
0bac7164 | 1517 | # 7. No reply to query for IP address other than router IP. |
e3393e3f BP |
1518 | for i in 1 2 3; do |
1519 | for j in 1 2 3; do | |
86e98048 BP |
1520 | for k in 1 2 3; do |
1521 | smac=f00000000$i$j$k # Source MAC | |
1522 | sip=`ip_to_hex 192 168 $i$j $k` # Source IP | |
1523 | rip=`ip_to_hex 192 168 $i$j 254` # Router IP | |
1524 | rmac=00000000ff$i$j # Router MAC | |
1525 | otherip=`ip_to_hex 192 168 $i$j 55` # Some other IP in subnet | |
0bac7164 BP |
1526 | test_arp $i$j$k $smac $sip $rip $rmac #4 |
1527 | test_arp $i$j$k $smac $otherip $rip $rmac #5 | |
1528 | test_arp $i$j$k $smac 0a123456 $rip $rmac #6 | |
1529 | test_arp $i$j$k $smac $sip $otherip #7 | |
1530 | done | |
1531 | done | |
1532 | done | |
1533 | ||
1534 | # Allow some time for packet forwarding. | |
1535 | # XXX This can be improved. | |
1536 | sleep 1 | |
1537 | ||
1538 | # 8. Generate an ARP reply for each of the IP addresses ARPed for | |
1539 | # earlier as #3. | |
1540 | # | |
1541 | # Here, the $s is the VIF that originated the ARP request and $d is | |
1542 | # the VIF that sends the ARP reply, which is somewhat backward but | |
1543 | # it means that $s and $d are the same as #3. | |
1544 | : > mac_bindings.expected | |
1545 | for is in 1 2 3; do | |
1546 | for js in 1 2 3; do | |
1547 | for ks in 1 2 3; do | |
1548 | s=$is$js$ks | |
1549 | for id in 1 2 3; do | |
1550 | for jd in 1 2 3; do | |
1551 | if test $is$js = $id$jd; then | |
1552 | continue | |
1553 | fi | |
1554 | ||
1555 | kd=1 | |
1556 | d=$id$jd$kd | |
1557 | ||
1558 | o4=`expr $is '*' 9 + $js '*' 3 + $ks + 10` | |
1559 | host_ip=`ip_to_hex 192 168 $id$jd $o4` | |
1560 | host_mac=8000000000$o4 | |
1561 | ||
1562 | lrmac=00000000ff$id$jd | |
1563 | lrip=`ip_to_hex 192 168 $id$jd 254` | |
1564 | ||
1565 | arp=${lrmac}${host_mac}08060001080006040002${host_mac}${host_ip}${lrmac}${lrip} | |
1566 | ||
1567 | echo | |
1568 | echo | |
1569 | echo | |
1570 | hv=hv`vif_to_hv $d` | |
1571 | as $hv ovs-appctl netdev-dummy/receive vif$d $arp | |
1572 | #as $hv ovs-appctl ofproto/trace br-int in_port=$d $arp | |
1573 | #as $hv ovs-ofctl dump-flows br-int table=19 | |
1574 | ||
1575 | host_ip_pretty=192.168.$id$jd.$o4 | |
1576 | host_mac_pretty=80:00:00:00:00:$o4 | |
1577 | echo lrp$id$jd,$host_ip_pretty,$host_mac_pretty >> mac_bindings.expected | |
1578 | done | |
1579 | done | |
86e98048 | 1580 | done |
9975d7be BP |
1581 | done |
1582 | done | |
0bac7164 | 1583 | |
9975d7be BP |
1584 | # Allow some time for packet forwarding. |
1585 | # XXX This can be improved. | |
1586 | sleep 1 | |
1587 | ||
0bac7164 BP |
1588 | # 9. Send an IP packet from every logical port to every other subnet. These |
1589 | # are the same packets already sent as #3, but now the destinations' IP-MAC | |
1590 | # bindings have been discovered via ARP, so instead of provoking an ARP | |
1591 | # request, these packets now get routed to their destinations (which don't | |
1592 | # have static MAC bindings, so they go to the port we've designated as | |
1593 | # accepting "unknown" MACs.) | |
1594 | for is in 1 2 3; do | |
1595 | for js in 1 2 3; do | |
1596 | for ks in 1 2 3; do | |
1597 | s=$is$js$ks | |
1598 | smac=f00000000$s | |
1599 | sip=`ip_to_hex 192 168 $is$js $ks` | |
1600 | for id in 1 2 3; do | |
1601 | for jd in 1 2 3; do | |
1602 | if test $is$js = $id$jd; then | |
1603 | continue | |
1604 | fi | |
1605 | ||
1606 | # Send the packet. | |
1607 | dmac=00000000ff$is$js | |
1608 | # Calculate a 4th octet for the destination that is | |
1609 | # unique per $s, avoids the .1 .2 .3 and .254 IP addresses | |
1610 | # that have static MAC bindings, and fits in the range | |
1611 | # 0-255. | |
1612 | o4=`expr $is '*' 9 + $js '*' 3 + $ks + 10` | |
1613 | dip=`ip_to_hex 192 168 $id$jd $o4` | |
1614 | test_ip $s $smac $dmac $sip $dip | |
1615 | ||
1616 | # Expect the packet egress. | |
1617 | host_mac=8000000000$o4 | |
1618 | outport=${id}11 | |
1619 | out_lrp=$id$jd | |
1620 | echo ${host_mac}00000000ff${out_lrp}08004500001c00000000"3f1101"00${sip}${dip}0035111100080000 | trim_zeros >> $outport.expected | |
1621 | done | |
1622 | done | |
1623 | done | |
1624 | done | |
1625 | done | |
1626 | ||
1627 | # Allow some time for packet forwarding. | |
1628 | # XXX This can be improved. | |
1629 | sleep 1 | |
1630 | ||
1631 | ovn-sbctl -f csv -d bare --no-heading \ | |
1632 | -- --columns=logical_port,ip,mac list mac_binding > mac_bindings | |
1633 | ||
9975d7be BP |
1634 | # Now check the packets actually received against the ones expected. |
1635 | for i in 1 2 3; do | |
1636 | for j in 1 2 3; do | |
86e98048 BP |
1637 | for k in 1 2 3; do |
1638 | file=hv`vif_to_hv $i$j$k`/vif$i$j$k-tx.pcap | |
1639 | echo $file | |
1640 | $PYTHON "$top_srcdir/utilities/ovs-pcap.in" $file | trim_zeros > $i$j$k.packets | |
2172f32d YT |
1641 | sort $i$j$k.expected > expout |
1642 | AT_CHECK([sort $i$j$k.packets], [0], [expout]) | |
86e98048 BP |
1643 | echo |
1644 | done | |
9975d7be BP |
1645 | done |
1646 | done | |
fcde56f5 | 1647 | |
0bac7164 BP |
1648 | # Check the MAC bindings against those expected. |
1649 | AT_CHECK_UNQUOTED([sort < mac_bindings], [0], [`sort < mac_bindings.expected` | |
1650 | ]) | |
1651 | ||
fcde56f5 LR |
1652 | # Gracefully terminate daemons |
1653 | for daemon in ovn-controller ovn-northd ovsdb-server; do | |
1654 | ovs-appctl -t $daemon exit | |
1655 | done | |
9975d7be | 1656 | AT_CLEANUP |
685f4dfe NS |
1657 | |
1658 | # 3 hypervisors, one logical switch, 3 logical ports per hypervisor | |
1659 | AT_SETUP([ovn -- portsecurity : 3 HVs, 1 LS, 3 lports/HV]) | |
1660 | AT_KEYWORDS([portsecurity]) | |
1661 | AT_SKIP_IF([test $HAVE_PYTHON = no]) | |
1662 | ovn_start | |
1663 | ||
1664 | # Create hypervisors hv[123]. | |
1665 | # Add vif1[123] to hv1, vif2[123] to hv2, vif3[123] to hv3. | |
1666 | # Add all of the vifs to a single logical switch lsw0. | |
1667 | # Turn off port security on vifs vif[123]1 | |
1668 | # Turn on l2 port security on vifs vif[123]2 | |
1669 | # Turn of l2 and l3 port security on vifs vif[123]3 | |
1670 | # Make vif13, vif2[23], vif3[123] destinations for unknown MACs. | |
1671 | ovn-nbctl lswitch-add lsw0 | |
1672 | net_add n1 | |
1673 | for i in 1 2 3; do | |
1674 | sim_add hv$i | |
1675 | as hv$i | |
1676 | ovs-vsctl add-br br-phys | |
1677 | ovn_attach n1 br-phys 192.168.0.$i | |
1678 | ||
1679 | for j in 1 2 3; do | |
1680 | ovs-vsctl add-port br-int vif$i$j -- set Interface vif$i$j external-ids:iface-id=lp$i$j options:tx_pcap=hv$i/vif$i$j-tx.pcap options:rxq_pcap=hv$i/vif$i$j-rx.pcap ofport-request=$i$j | |
1681 | ovn-nbctl lport-add lsw0 lp$i$j | |
1682 | if test $j = 1; then | |
1683 | ovn-nbctl lport-set-addresses lp$i$j "f0:00:00:00:00:$i$j 192.168.0.$i$j" unknown | |
1684 | elif test $j = 2; then | |
1685 | ovn-nbctl lport-set-addresses lp$i$j "f0:00:00:00:00:$i$j 192.168.0.$i$j" | |
1686 | ovn-nbctl lport-set-port-security lp$i$j f0:00:00:00:00:$i$j | |
1687 | else | |
1688 | extra_addr="f0:00:00:00:0$i:$i$j fe80::ea2a:eaff:fe28:$i$j" | |
1689 | ovn-nbctl lport-set-addresses lp$i$j "f0:00:00:00:00:$i$j 192.168.0.$i$j" "$extra_addr" | |
1690 | ovn-nbctl lport-set-port-security lp$i$j "f0:00:00:00:00:$i$j 192.168.0.$i$j" "$extra_addr" | |
1691 | fi | |
1692 | done | |
1693 | done | |
1694 | ||
685f4dfe NS |
1695 | # Pre-populate the hypervisors' ARP tables so that we don't lose any |
1696 | # packets for ARP resolution (native tunneling doesn't queue packets | |
1697 | # for ARP resolution). | |
1698 | ovn_populate_arp | |
1699 | ||
1700 | # Allow some time for ovn-northd and ovn-controller to catch up. | |
1701 | # XXX This should be more systematic. | |
1702 | sleep 1 | |
685f4dfe NS |
1703 | |
1704 | # Given the name of a logical port, prints the name of the hypervisor | |
1705 | # on which it is located. | |
1706 | vif_to_hv() { | |
1707 | echo hv${1%?} | |
1708 | } | |
1709 | ||
1710 | ||
1711 | trim_zeros() { | |
1712 | sed 's/\(00\)\{1,\}$//' | |
1713 | } | |
1714 | for i in 1 2 3; do | |
1715 | for j in 1 2 3; do | |
1716 | : > $i$j.expected | |
1717 | done | |
1718 | done | |
1719 | ||
1720 | # test_ip INPORT SRC_MAC DST_MAC SRC_IP DST_IP OUTPORT... | |
1721 | # | |
1722 | # This shell function causes an ip packet to be received on INPORT. | |
1723 | # The packet's content has Ethernet destination DST and source SRC | |
1724 | # (each exactly 12 hex digits) and Ethernet type ETHTYPE (4 hex digits). | |
1725 | # The OUTPORTs (zero or more) list the VIFs on which the packet should | |
1726 | # be received. INPORT and the OUTPORTs are specified as lport numbers, | |
1727 | # e.g. 11 for vif11. | |
1728 | test_ip() { | |
1729 | # This packet has bad checksums but logical L3 routing doesn't check. | |
1730 | local inport=$1 src_mac=$2 dst_mac=$3 src_ip=$4 dst_ip=$5 | |
1731 | local packet=${dst_mac}${src_mac}08004500001c0000000040110000${src_ip}${dst_ip}003511110008 | |
1732 | shift; shift; shift; shift; shift | |
1733 | hv=`vif_to_hv $inport` | |
1734 | as $hv ovs-appctl netdev-dummy/receive vif$inport $packet | |
1735 | #as $hv ovs-appctl ofproto/trace br-int in_port=$inport $packet | |
1736 | for outport; do | |
1737 | echo $packet | trim_zeros >> $outport.expected | |
1738 | done | |
1739 | } | |
1740 | ||
1741 | # test_arp INPORT SHA SPA TPA DROP [REPLY_HA] | |
1742 | # | |
1743 | # Causes a packet to be received on INPORT. The packet is an ARP | |
1744 | # request with SHA, SPA, and TPA as specified. If REPLY_HA is provided, then | |
1745 | # it should be the hardware address of the target to expect to receive in an | |
1746 | # ARP reply; otherwise no reply is expected. | |
1747 | # | |
1748 | # INPORT is an lport number, e.g. 11 for vif11. | |
1749 | # SHA and REPLY_HA are each 12 hex digits. | |
1750 | # SPA and TPA are each 8 hex digits. | |
1751 | test_arp() { | |
1752 | local inport=$1 smac=$2 sha=$3 spa=$4 tpa=$5 drop=$6 reply_ha=$7 | |
1753 | local request=ffffffffffff${smac}08060001080006040001${sha}${spa}ffffffffffff${tpa} | |
1754 | hv=`vif_to_hv $inport` | |
1755 | as $hv ovs-appctl netdev-dummy/receive vif$inport $request | |
1756 | #as $hv ovs-appctl ofproto/trace br-int in_port=$inport $request | |
1757 | if test $drop != 1; then | |
1758 | if test X$reply_ha == X; then | |
1759 | # Expect to receive the broadcast ARP on the other logical switch ports | |
1760 | # if no reply is expected. | |
1761 | local i j | |
1762 | for i in 1 2 3; do | |
1763 | for j in 1 2 3; do | |
1764 | if test $i$j != $inport; then | |
1765 | echo $request >> $i$j.expected | |
1766 | fi | |
1767 | done | |
1768 | done | |
1769 | else | |
1770 | # Expect to receive the reply, if any. | |
1771 | local reply=${smac}${reply_ha}08060001080006040002${reply_ha}${tpa}${sha}${spa} | |
1772 | echo $reply >> $inport.expected | |
1773 | fi | |
1774 | fi | |
1775 | } | |
1776 | ||
1777 | # test_ipv6 INPORT SRC_MAC DST_MAC SRC_IP DST_IP OUTPORT... | |
1778 | # This function is similar to test_ip() except that it sends | |
1779 | # ipv6 packet | |
1780 | test_ipv6() { | |
1781 | local inport=$1 src_mac=$2 dst_mac=$3 src_ip=$4 dst_ip=$5 | |
1782 | local packet=${dst_mac}${src_mac}86dd6000000000083aff${src_ip}${dst_ip}0000000000000000 | |
1783 | shift; shift; shift; shift; shift | |
1784 | hv=`vif_to_hv $inport` | |
1785 | as $hv ovs-appctl netdev-dummy/receive vif$inport $packet | |
1786 | #as $hv ovs-appctl ofproto/trace br-int in_port=$inport $packet | |
1787 | for outport; do | |
1788 | echo $packet | trim_zeros >> $outport.expected | |
1789 | done | |
1790 | } | |
1791 | ||
9e687b23 DL |
1792 | # test_icmpv6 INPORT SRC_MAC DST_MAC SRC_IP DST_IP ICMP_TYPE OUTPORT... |
1793 | # This function is similar to test_ipv6() except it specifies the ICMPv6 type | |
1794 | # of the test packet | |
1795 | test_icmpv6() { | |
1796 | local inport=$1 src_mac=$2 dst_mac=$3 src_ip=$4 dst_ip=$5 icmp_type=$6 | |
1797 | local packet=${dst_mac}${src_mac}86dd6000000000083aff${src_ip}${dst_ip}${icmp_type}00000000000000 | |
1798 | shift; shift; shift; shift; shift; shift | |
1799 | hv=`vif_to_hv $inport` | |
1800 | as $hv ovs-appctl netdev-dummy/receive vif$inport $packet | |
1801 | #as $hv ovs-appctl ofproto/trace br-int in_port=$inport $packet | |
1802 | for outport; do | |
1803 | echo $packet | trim_zeros >> $outport.expected | |
1804 | done | |
1805 | } | |
1806 | ||
685f4dfe NS |
1807 | ip_to_hex() { |
1808 | printf "%02x%02x%02x%02x" "$@" | |
1809 | } | |
1810 | ||
1811 | # no port security | |
1812 | sip=`ip_to_hex 192 168 0 12` | |
1813 | tip=`ip_to_hex 192 168 0 13` | |
1814 | # the arp packet should be allowed even if lp[123]1 is | |
1815 | # not configured with mac f00000000023 and ip 192.168.0.12 | |
1816 | for i in 1 2 3; do | |
1817 | test_arp ${i}1 f00000000023 f00000000023 $sip $tip 0 f00000000013 | |
1818 | for j in 1 2 3; do | |
1819 | if test $i != $j; then | |
1820 | test_ip ${i}1 f000000000${i}1 f000000000${j}1 $sip $tip ${j}1 | |
1821 | fi | |
1822 | done | |
1823 | done | |
1824 | ||
1825 | # l2 port security | |
1826 | sip=`ip_to_hex 192 168 0 12` | |
1827 | tip=`ip_to_hex 192 168 0 13` | |
1828 | ||
1829 | # arp packet should be allowed since lp22 is configured with | |
1830 | # mac f00000000022 | |
1831 | test_arp 22 f00000000022 f00000000022 $sip $tip 0 f00000000013 | |
1832 | ||
1833 | # arp packet should not be allowed since lp32 is not configured with | |
1834 | # mac f00000000021 | |
1835 | test_arp 32 f00000000021 f00000000021 $sip $tip 1 | |
1836 | ||
1837 | # arp packet with sha set to f00000000021 should not be allowed | |
1838 | # for lp12 | |
1839 | test_arp 12 f00000000012 f00000000021 $sip $tip 1 | |
1840 | ||
1841 | # ip packets should be allowed and received since lp[123]2 do not | |
1842 | # have l3 port security | |
1843 | sip=`ip_to_hex 192 168 0 55` | |
1844 | tip=`ip_to_hex 192 168 0 66` | |
1845 | for i in 1 2 3; do | |
1846 | for j in 1 2 3; do | |
1847 | if test $i != $j; then | |
1848 | test_ip ${i}2 f000000000${i}2 f000000000${j}2 $sip $tip ${j}2 | |
1849 | fi | |
1850 | done | |
1851 | done | |
1852 | ||
1853 | # ipv6 packets should be received by lp[123]2 | |
1854 | # lp[123]1 can send ipv6 traffic as there is no port security | |
1855 | sip=fe800000000000000000000000000000 | |
1856 | tip=ff020000000000000000000000000000 | |
1857 | ||
1858 | for i in 1 2 3; do | |
1859 | test_ipv6 ${i}1 f000000000${i}1 f000000000${i}2 $sip $tip ${i}2 | |
1860 | done | |
1861 | ||
1862 | ||
1863 | # l2 and l3 port security | |
1864 | sip=`ip_to_hex 192 168 0 13` | |
1865 | tip=`ip_to_hex 192 168 0 22` | |
1866 | # arp packet should be allowed since lp13 is configured with | |
1867 | # f00000000013 and 192.168.0.13 | |
1868 | test_arp 13 f00000000013 f00000000013 $sip $tip 0 f00000000022 | |
1869 | ||
1870 | # the arp packet should be dropped because lp23 is not configured | |
1871 | # with mac f00000000022 | |
1872 | sip=`ip_to_hex 192 168 0 13` | |
1873 | tip=`ip_to_hex 192 168 0 22` | |
1874 | test_arp 23 f00000000022 f00000000022 $sip $tip 1 | |
1875 | ||
1876 | # the arp packet should be dropped because lp33 is not configured | |
1877 | # with ip 192.168.0.55 | |
1878 | spa=`ip_to_hex 192 168 0 55` | |
1879 | tpa=`ip_to_hex 192 168 0 22` | |
1880 | test_arp 33 f00000000031 f00000000031 $spa $tpa 1 | |
1881 | ||
1882 | # ip packets should not be received by lp[123]3 since | |
1883 | # l3 port security is enabled | |
1884 | sip=`ip_to_hex 192 168 0 55` | |
1885 | tip=`ip_to_hex 192 168 0 66` | |
1886 | for i in 1 2 3; do | |
1887 | for j in 1 2 3; do | |
1888 | test_ip ${i}2 f000000000${i}2 f000000000${j}3 $sip $tip | |
1889 | done | |
1890 | done | |
1891 | ||
1892 | # ipv6 packets should be dropped for lp[123]3 since | |
1893 | # it is configured with only ipv4 address | |
1894 | sip=fe800000000000000000000000000000 | |
1895 | tip=ff020000000000000000000000000000 | |
1896 | ||
1897 | for i in 1 2 3; do | |
1898 | test_ipv6 ${i}3 f000000000${i}3 f00000000022 $sip $tip | |
1899 | done | |
1900 | ||
1901 | # ipv6 packets should not be received by lp[123]3 with mac f000000000$[123]3 | |
1902 | # lp[123]1 can send ipv6 traffic as there is no port security | |
1903 | for i in 1 2 3; do | |
1904 | test_ipv6 ${i}1 f000000000${i}1 f000000000${i}3 $sip $tip | |
1905 | done | |
1906 | ||
1907 | # lp13 has extra port security with mac f0000000113 and ipv6 addr | |
1908 | # fe80::ea2a:eaff:fe28:0012 | |
1909 | ||
1910 | # ipv4 packet should be dropped for lp13 with mac f0000000113 | |
1911 | sip=`ip_to_hex 192 168 0 13` | |
1912 | tip=`ip_to_hex 192 168 0 23` | |
1913 | test_ip 13 f00000000113 f00000000023 $sip $tip | |
1914 | ||
1915 | # ipv6 packet should be received by lp[123]3 with mac f0000000{i}{i}3 | |
1916 | # and ip6.dst as fe80::ea2a:eaff:fe28:0{i}{i}3. | |
1917 | # lp11 can send ipv6 traffic as there is no port security | |
1918 | sip=ee800000000000000000000000000000 | |
1919 | for i in 1 2 3; do | |
1920 | tip=fe80000000000000ea2aeafffe2800{i}3 | |
1921 | test_ipv6 11 f00000000011 f000000000{i}${i}3 $sip $tip {i}3 | |
1922 | done | |
1923 | ||
1924 | ||
1925 | # ipv6 packet should not be received by lp33 with mac f0000000333 | |
1926 | # and ip6.dst as fe80::ea2a:eaff:fe28:0023 as it is | |
1927 | # configured with fe80::ea2a:eaff:fe28:0033 | |
1928 | # lp11 can send ipv6 traffic as there is no port security | |
1929 | ||
1930 | sip=ee800000000000000000000000000000 | |
1931 | tip=fe80000000000000ea2aeafffe280023 | |
1932 | test_ipv6 11 f00000000011 f00000000333 $sip $tip | |
1933 | ||
1934 | # ipv6 packet should be allowed for lp[123]3 with mac f0000000{i}{i}3 | |
1935 | # and ip6.src fe80::ea2a:eaff:fe28:0{i}{i}3 and ip6.src ::. | |
1936 | # and should be dropped for any other ip6.src | |
1937 | # lp21 can receive ipv6 traffic as there is no port security | |
1938 | ||
1939 | tip=ee800000000000000000000000000000 | |
1940 | for i in 1 2 3; do | |
1941 | sip=fe80000000000000ea2aeafffe2800${i}3 | |
1942 | test_ipv6 ${i}3 f00000000${i}${i}3 f00000000021 $sip $tip 21 | |
1943 | ||
9e687b23 | 1944 | # Test ICMPv6 MLD reports (v1 and v2) and NS for DAD |
685f4dfe | 1945 | sip=00000000000000000000000000000000 |
9e687b23 DL |
1946 | test_icmpv6 ${i}3 f00000000${i}${i}3 f00000000021 $sip ff020000000000000000000000160000 83 21 |
1947 | test_icmpv6 ${i}3 f00000000${i}${i}3 f00000000021 $sip ff020000000000000000000000160000 8f 21 | |
1948 | test_icmpv6 ${i}3 f00000000${i}${i}3 f00000000021 $sip ff0200000000000000ea2aeafffe2800 87 21 | |
1949 | # Traffic to non-multicast traffic should be dropped | |
1950 | test_icmpv6 ${i}3 f00000000${i}${i}3 f00000000021 $sip $tip 83 | |
1951 | # Traffic of other ICMPv6 types should be dropped | |
1952 | test_icmpv6 ${i}3 f00000000${i}${i}3 f00000000021 $sip ff020000000000000000000000160000 80 | |
685f4dfe NS |
1953 | |
1954 | # should be dropped | |
1955 | sip=ae80000000000000ea2aeafffe2800aa | |
1956 | test_ipv6 ${i}3 f00000000${i}${i}3 f00000000021 $sip $tip | |
1957 | done | |
1958 | ||
7d9d86ad NS |
1959 | # configure lport13 to send and received IPv4 packets with an address range |
1960 | ovn-nbctl lport-set-port-security lp13 "f0:00:00:00:00:13 192.168.0.13 20.0.0.4/24 10.0.0.0/24" | |
1961 | ||
8ff5a966 NS |
1962 | sleep 2 |
1963 | ||
7d9d86ad NS |
1964 | sip=`ip_to_hex 10 0 0 13` |
1965 | tip=`ip_to_hex 192 168 0 22` | |
1966 | # arp packet with inner ip 10.0.0.13 should be allowed for lport13 | |
1967 | test_arp 13 f00000000013 f00000000013 $sip $tip 0 f00000000022 | |
1968 | ||
1969 | sip=`ip_to_hex 10 0 0 14` | |
1970 | tip=`ip_to_hex 192 168 0 23` | |
1971 | # IPv4 packet from lport13 with src ip 10.0.0.14 destined to lport23 | |
1972 | # with dst ip 192.168.0.23 should be allowed | |
1973 | test_ip 13 f00000000013 f00000000023 $sip $tip 23 | |
1974 | ||
1975 | sip=`ip_to_hex 192 168 0 33` | |
1976 | tip=`ip_to_hex 10 0 0 15` | |
1977 | # IPv4 packet from lport33 with src ip 192.168.0.33 destined to lport13 | |
1978 | # with dst ip 10.0.0.15 should be received by lport13 | |
1979 | test_ip 33 f00000000033 f00000000013 $sip $tip 13 | |
1980 | ||
1981 | sip=`ip_to_hex 192 168 0 33` | |
1982 | tip=`ip_to_hex 20 0 0 4` | |
1983 | # IPv4 packet from lport33 with src ip 192.168.0.33 destined to lport13 | |
1984 | # with dst ip 20.0.0.4 should be received by lport13 | |
1985 | test_ip 33 f00000000033 f00000000013 $sip $tip 13 | |
1986 | ||
1987 | sip=`ip_to_hex 192 168 0 33` | |
1988 | tip=`ip_to_hex 20 0 0 5` | |
1989 | # IPv4 packet from lport33 with src ip 192.168.0.33 destined to lport13 | |
1990 | # with dst ip 20.0.0.5 should not be received by lport13 | |
1991 | test_ip 33 f00000000033 f00000000013 $sip $tip | |
1992 | ||
1993 | sip=`ip_to_hex 192 168 0 33` | |
1994 | tip=`ip_to_hex 20 0 0 255` | |
1995 | # IPv4 packet from lport33 with src ip 192.168.0.33 destined to lport13 | |
1996 | # with dst ip 20.0.0.255 should be received by lport13 | |
1997 | test_ip 33 f00000000033 f00000000013 $sip $tip 13 | |
1998 | ||
1999 | sip=`ip_to_hex 192 168 0 33` | |
2000 | tip=`ip_to_hex 192 168 0 255` | |
2001 | # IPv4 packet from lport33 with src ip 192.168.0.33 destined to lport13 | |
2002 | # with dst ip 192.168.0.255 should not be received by lport13 | |
2003 | test_ip 33 f00000000033 f00000000013 $sip $tip | |
2004 | ||
2005 | sip=`ip_to_hex 192 168 0 33` | |
2006 | tip=`ip_to_hex 224 0 0 4` | |
2007 | # IPv4 packet from lport33 with src ip 192.168.0.33 destined to lport13 | |
2008 | # with dst ip 224.0.0.4 should be received by lport13 | |
2009 | test_ip 33 f00000000033 f00000000013 $sip $tip 13 | |
685f4dfe NS |
2010 | |
2011 | # Allow some time for packet forwarding. | |
2012 | ||
2013 | # XXX This can be improved. | |
2014 | sleep 1 | |
2015 | ||
bb0c41d3 RM |
2016 | #dump information including flow counters |
2017 | ovn-nbctl show | |
2018 | ovn-sbctl dump-flows -- list multicast_group | |
2019 | ||
2020 | echo "------ hv1 dump ------" | |
2021 | as hv1 ovs-vsctl show | |
6195e2e7 | 2022 | as hv1 ovs-ofctl -O OpenFlow13 show br-int |
bb0c41d3 RM |
2023 | as hv1 ovs-ofctl -O OpenFlow13 dump-flows br-int |
2024 | ||
2025 | echo "------ hv2 dump ------" | |
2026 | as hv2 ovs-vsctl show | |
6195e2e7 | 2027 | as hv2 ovs-ofctl -O OpenFlow13 show br-int |
bb0c41d3 RM |
2028 | as hv2 ovs-ofctl -O OpenFlow13 dump-flows br-int |
2029 | ||
2030 | echo "------ hv3 dump ------" | |
2031 | as hv3 ovs-vsctl show | |
6195e2e7 | 2032 | as hv3 ovs-ofctl -O OpenFlow13 show br-int |
bb0c41d3 RM |
2033 | as hv3 ovs-ofctl -O OpenFlow13 dump-flows br-int |
2034 | ||
685f4dfe NS |
2035 | # Now check the packets actually received against the ones expected. |
2036 | for i in 1 2 3; do | |
2037 | for j in 1 2 3; do | |
2038 | file=hv$i/vif$i$j-tx.pcap | |
2039 | echo $file | |
2040 | $PYTHON "$top_srcdir/utilities/ovs-pcap.in" $file | trim_zeros > $i$j.packets | |
2041 | sort $i$j.expected > expout | |
2042 | AT_CHECK([sort $i$j.packets], [0], [expout]) | |
2043 | echo | |
2044 | done | |
2045 | done | |
2046 | ||
2047 | # Gracefully terminate daemons | |
d9c8c57c LR |
2048 | for sim in hv1 hv2 hv3; do |
2049 | as $sim | |
2050 | OVS_APP_EXIT_AND_WAIT([ovn-controller]) | |
2051 | OVS_APP_EXIT_AND_WAIT([ovs-vswitchd]) | |
2052 | OVS_APP_EXIT_AND_WAIT([ovsdb-server]) | |
685f4dfe | 2053 | done |
d9c8c57c LR |
2054 | |
2055 | as ovn-sb | |
2056 | OVS_APP_EXIT_AND_WAIT([ovsdb-server]) | |
2057 | ||
2058 | as ovn-nb | |
2059 | OVS_APP_EXIT_AND_WAIT([ovsdb-server]) | |
2060 | ||
2061 | as northd | |
2062 | OVS_APP_EXIT_AND_WAIT([ovn-northd]) | |
2063 | ||
2064 | as main | |
2065 | OVS_APP_EXIT_AND_WAIT([ovs-vswitchd]) | |
2066 | OVS_APP_EXIT_AND_WAIT([ovsdb-server]) | |
2067 | ||
685f4dfe | 2068 | AT_CLEANUP |
509afdc3 GS |
2069 | |
2070 | AT_SETUP([ovn -- 2 HVs, 2 LS, 1 lport/LS, 2 peer LRs]) | |
2071 | AT_KEYWORDS([ovnpeer]) | |
2072 | AT_SKIP_IF([test $HAVE_PYTHON = no]) | |
2073 | ovn_start | |
2074 | ||
2075 | # Logical network: | |
2076 | # Two LRs - R1 and R2 that are connected to each other as peers in 20.0.0.0/24 | |
2077 | # network. R1 has a switchs ls1 (191.168.1.0/24) connected to it. | |
2078 | # R2 has ls2 (172.16.1.0/24) connected to it. | |
2079 | ||
2080 | ovn-nbctl create Logical_Router name=R1 | |
2081 | ovn-nbctl create Logical_Router name=R2 | |
2082 | ||
2083 | ovn-nbctl lswitch-add ls1 | |
2084 | ovn-nbctl lswitch-add ls2 | |
2085 | ||
2086 | # Connect ls1 to R1 | |
2087 | ovn-nbctl -- --id=@lrp create Logical_Router_port name=ls1 \ | |
2088 | network=192.168.1.1/24 mac=\"00:00:00:01:02:03\" -- add Logical_Router R1 \ | |
2089 | ports @lrp -- lport-add ls1 rp-ls1 | |
2090 | ||
2091 | ovn-nbctl set Logical_port rp-ls1 type=router options:router-port=ls1 \ | |
2092 | addresses=\"00:00:00:01:02:03\" | |
2093 | ||
2094 | # Connect ls2 to R2 | |
2095 | ovn-nbctl -- --id=@lrp create Logical_Router_port name=ls2 \ | |
2096 | network=172.16.1.1/24 mac=\"00:00:00:01:02:04\" -- add Logical_Router R2 \ | |
2097 | ports @lrp -- lport-add ls2 rp-ls2 | |
2098 | ||
2099 | ovn-nbctl set Logical_port rp-ls2 type=router options:router-port=ls2 \ | |
2100 | addresses=\"00:00:00:01:02:04\" | |
2101 | ||
2102 | # Connect R1 to R2 | |
2103 | lrp1_uuid=`ovn-nbctl -- --id=@lrp create Logical_Router_port name=R1_R2 \ | |
2104 | network="20.0.0.1/24" mac=\"00:00:00:02:03:04\" \ | |
2105 | -- add Logical_Router R1 ports @lrp` | |
2106 | ||
2107 | lrp2_uuid=`ovn-nbctl -- --id=@lrp create Logical_Router_port name=R2_R1 \ | |
2108 | network="20.0.0.2/24" mac=\"00:00:00:02:03:05\" \ | |
2109 | -- add Logical_Router R2 ports @lrp` | |
2110 | ||
2111 | ovn-nbctl set logical_router_port $lrp1_uuid peer="R2_R1" | |
2112 | ovn-nbctl set logical_router_port $lrp2_uuid peer="R1_R2" | |
2113 | ||
2114 | ovn-nbctl set Logical_Router R1 default_gw="20.0.0.2" | |
2115 | ovn-nbctl set Logical_Router R2 default_gw="20.0.0.1" | |
2116 | ||
2117 | # Create logical port ls1-lp1 in ls1 | |
2118 | ovn-nbctl lport-add ls1 ls1-lp1 \ | |
2119 | -- lport-set-addresses ls1-lp1 "f0:00:00:01:02:03 192.168.1.2" | |
2120 | ||
2121 | # Create logical port ls2-lp1 in ls2 | |
2122 | ovn-nbctl lport-add ls2 ls2-lp1 \ | |
2123 | -- lport-set-addresses ls2-lp1 "f0:00:00:01:02:04 172.16.1.2" | |
2124 | ||
2125 | # Create two hypervisor and create OVS ports corresponding to logical ports. | |
2126 | net_add n1 | |
2127 | ||
2128 | sim_add hv1 | |
2129 | as hv1 | |
2130 | ovs-vsctl add-br br-phys | |
2131 | ovn_attach n1 br-phys 192.168.0.1 | |
2132 | ovs-vsctl -- add-port br-int hv1-vif1 -- \ | |
2133 | set interface hv1-vif1 external-ids:iface-id=ls1-lp1 \ | |
2134 | options:tx_pcap=hv1/vif1-tx.pcap \ | |
2135 | options:rxq_pcap=hv1/vif1-rx.pcap \ | |
2136 | ofport-request=1 | |
2137 | ||
2138 | sim_add hv2 | |
2139 | as hv2 | |
2140 | ovs-vsctl add-br br-phys | |
2141 | ovn_attach n1 br-phys 192.168.0.2 | |
2142 | ovs-vsctl -- add-port br-int hv2-vif1 -- \ | |
2143 | set interface hv2-vif1 external-ids:iface-id=ls2-lp1 \ | |
2144 | options:tx_pcap=hv2/vif1-tx.pcap \ | |
2145 | options:rxq_pcap=hv2/vif1-rx.pcap \ | |
2146 | ofport-request=1 | |
2147 | ||
2148 | ||
2149 | # Pre-populate the hypervisors' ARP tables so that we don't lose any | |
2150 | # packets for ARP resolution (native tunneling doesn't queue packets | |
2151 | # for ARP resolution). | |
2152 | ovn_populate_arp | |
2153 | ||
2154 | # Allow some time for ovn-northd and ovn-controller to catch up. | |
2155 | # XXX This should be more systematic. | |
2156 | sleep 1 | |
2157 | ||
2158 | # Send ip packets between the two ports. | |
2159 | ip_to_hex() { | |
2160 | printf "%02x%02x%02x%02x" "$@" | |
2161 | } | |
2162 | trim_zeros() { | |
2163 | sed 's/\(00\)\{1,\}$//' | |
2164 | } | |
2165 | ||
2166 | # Packet to send. | |
2167 | src_mac="f00000010203" | |
2168 | dst_mac="000000010203" | |
2169 | src_ip=`ip_to_hex 192 168 1 2` | |
2170 | dst_ip=`ip_to_hex 172 16 1 2` | |
2171 | packet=${dst_mac}${src_mac}08004500001c0000000040110000${src_ip}${dst_ip}0035111100080000 | |
2172 | as hv1 ovs-appctl netdev-dummy/receive hv1-vif1 $packet | |
2173 | ||
2174 | ||
2175 | echo "---------NB dump-----" | |
2176 | ovn-nbctl show | |
2177 | echo "---------------------" | |
2178 | ovn-nbctl list logical_router | |
2179 | echo "---------------------" | |
2180 | ovn-nbctl list logical_router_port | |
2181 | echo "---------------------" | |
2182 | ||
2183 | echo "---------SB dump-----" | |
2184 | ovn-sbctl list datapath_binding | |
2185 | echo "---------------------" | |
2186 | ovn-sbctl list port_binding | |
2187 | echo "---------------------" | |
2188 | ||
2189 | echo "------ hv1 dump ----------" | |
8dab1022 | 2190 | as hv1 ovs-ofctl show br-int |
509afdc3 GS |
2191 | as hv1 ovs-ofctl dump-flows br-int |
2192 | echo "------ hv2 dump ----------" | |
8dab1022 | 2193 | as hv2 ovs-ofctl show br-int |
509afdc3 GS |
2194 | as hv2 ovs-ofctl dump-flows br-int |
2195 | ||
2196 | # Packet to Expect | |
2197 | src_mac="000000010204" | |
2198 | dst_mac="f00000010204" | |
2199 | expected=${dst_mac}${src_mac}08004500001c000000003e110200${src_ip}${dst_ip}0035111100080000 | |
2200 | ||
2201 | $PYTHON "$top_srcdir/utilities/ovs-pcap.in" hv2/vif1-tx.pcap | trim_zeros > received.packets | |
2202 | echo $expected | trim_zeros > expout | |
2203 | AT_CHECK([cat received.packets], [0], [expout]) | |
2204 | ||
2205 | for sim in hv1 hv2; do | |
2206 | as $sim | |
2207 | OVS_APP_EXIT_AND_WAIT([ovn-controller]) | |
2208 | OVS_APP_EXIT_AND_WAIT([ovs-vswitchd]) | |
2209 | OVS_APP_EXIT_AND_WAIT([ovsdb-server]) | |
2210 | done | |
2211 | ||
2212 | as ovn-sb | |
2213 | OVS_APP_EXIT_AND_WAIT([ovsdb-server]) | |
2214 | ||
2215 | as ovn-nb | |
2216 | OVS_APP_EXIT_AND_WAIT([ovsdb-server]) | |
2217 | ||
2218 | as northd | |
2219 | OVS_APP_EXIT_AND_WAIT([ovn-northd]) | |
2220 | ||
2221 | as main | |
2222 | OVS_APP_EXIT_AND_WAIT([ovs-vswitchd]) | |
2223 | OVS_APP_EXIT_AND_WAIT([ovsdb-server]) | |
2224 | ||
2225 | AT_CLEANUP | |
5412db30 J |
2226 | |
2227 | ||
2228 | AT_SETUP([ovn -- 1 HVs, 2 LSs, 1 lport/LS, 1 LR]) | |
2229 | AT_KEYWORDS([router-admin-state]) | |
2230 | AT_SKIP_IF([test $HAVE_PYTHON = no]) | |
2231 | ovn_start | |
2232 | ||
2233 | # Logical network: | |
2234 | # One LR - R1 has switch ls1 (191.168.1.0/24) connected to it, | |
2235 | # and has switch ls2 (172.16.1.0/24) connected to it. | |
2236 | ||
2237 | ovn-nbctl create Logical_Router name=R1 | |
2238 | ||
2239 | ovn-nbctl lswitch-add ls1 | |
2240 | ovn-nbctl lswitch-add ls2 | |
2241 | ||
2242 | # Connect ls1 to R1 | |
2243 | ovn-nbctl -- --id=@lrp create Logical_Router_port name=ls1 \ | |
2244 | network=192.168.1.1/24 mac=\"00:00:00:01:02:03\" -- add Logical_Router R1 \ | |
2245 | ports @lrp -- lport-add ls1 rp-ls1 | |
2246 | ||
2247 | ovn-nbctl set Logical_port rp-ls1 type=router options:router-port=ls1 \ | |
2248 | addresses=\"00:00:00:01:02:03\" | |
2249 | ||
2250 | # Connect ls2 to R1 | |
2251 | ovn-nbctl -- --id=@lrp create Logical_Router_port name=ls2 \ | |
2252 | network=172.16.1.1/24 mac=\"00:00:00:01:02:04\" -- add Logical_Router R1 \ | |
2253 | ports @lrp -- lport-add ls2 rp-ls2 | |
2254 | ||
2255 | ovn-nbctl set Logical_port rp-ls2 type=router options:router-port=ls2 \ | |
2256 | addresses=\"00:00:00:01:02:04\" | |
2257 | ||
2258 | # Create logical port ls1-lp1 in ls1 | |
2259 | ovn-nbctl lport-add ls1 ls1-lp1 \ | |
2260 | -- lport-set-addresses ls1-lp1 "f0:00:00:01:02:03 192.168.1.2" | |
2261 | ||
2262 | # Create logical port ls2-lp1 in ls2 | |
2263 | ovn-nbctl lport-add ls2 ls2-lp1 \ | |
2264 | -- lport-set-addresses ls2-lp1 "f0:00:00:01:02:04 172.16.1.2" | |
2265 | ||
2266 | # Create one hypervisor and create OVS ports corresponding to logical ports. | |
2267 | net_add n1 | |
2268 | ||
2269 | sim_add hv1 | |
2270 | as hv1 | |
2271 | ovs-vsctl add-br br-phys | |
2272 | ovn_attach n1 br-phys 192.168.0.1 | |
2273 | ovs-vsctl -- add-port br-int vif1 -- \ | |
2274 | set interface vif1 external-ids:iface-id=ls1-lp1 \ | |
2275 | options:tx_pcap=hv1/vif1-tx.pcap \ | |
2276 | options:rxq_pcap=hv1/vif1-rx.pcap \ | |
2277 | ofport-request=1 | |
2278 | ||
2279 | ovs-vsctl -- add-port br-int vif2 -- \ | |
2280 | set interface vif2 external-ids:iface-id=ls2-lp1 \ | |
2281 | options:tx_pcap=hv1/vif2-tx.pcap \ | |
2282 | options:rxq_pcap=hv1/vif2-rx.pcap \ | |
2283 | ofport-request=1 | |
2284 | ||
2285 | ||
2286 | # Allow some time for ovn-northd and ovn-controller to catch up. | |
2287 | # XXX This should be more systematic. | |
2288 | sleep 1 | |
2289 | ||
2290 | # Send ip packets between the two ports. | |
2291 | ip_to_hex() { | |
2292 | printf "%02x%02x%02x%02x" "$@" | |
2293 | } | |
2294 | trim_zeros() { | |
2295 | sed 's/\(00\)\{1,\}$//' | |
2296 | } | |
2297 | ||
2298 | # Packet to send. | |
2299 | src_mac="f00000010203" | |
2300 | dst_mac="000000010203" | |
2301 | src_ip=`ip_to_hex 192 168 1 2` | |
2302 | dst_ip=`ip_to_hex 172 16 1 2` | |
2303 | packet=${dst_mac}${src_mac}08004500001c0000000040110000${src_ip}${dst_ip}0035111100080000 | |
2304 | as hv1 ovs-appctl netdev-dummy/receive vif1 $packet | |
2305 | ||
2306 | ||
2307 | echo "---------NB dump-----" | |
2308 | ovn-nbctl show | |
2309 | echo "---------------------" | |
2310 | ovn-nbctl list logical_router | |
2311 | echo "---------------------" | |
2312 | ovn-nbctl list logical_router_port | |
2313 | echo "---------------------" | |
2314 | ||
2315 | echo "---------SB dump-----" | |
2316 | ovn-sbctl list datapath_binding | |
2317 | echo "---------------------" | |
2318 | ovn-sbctl list logical_flow | |
2319 | echo "---------------------" | |
2320 | ||
2321 | echo "------ hv1 dump ----------" | |
2322 | as hv1 ovs-ofctl dump-flows br-int | |
2323 | ||
2324 | ||
2325 | #Disable router R1 | |
2326 | ovn-nbctl set Logical_Router R1 enabled=false | |
2327 | ||
2328 | echo "---------SB dump-----" | |
2329 | ovn-sbctl list datapath_binding | |
2330 | echo "---------------------" | |
2331 | ovn-sbctl list logical_flow | |
2332 | echo "---------------------" | |
2333 | ||
2334 | echo "------ hv1 dump ----------" | |
2335 | as hv1 ovs-ofctl dump-flows br-int | |
2336 | ||
2337 | as hv1 ovs-appctl netdev-dummy/receive vif1 $packet | |
2338 | ||
2339 | # Packet to Expect | |
2340 | expect_src_mac="000000010204" | |
2341 | expect_dst_mac="f00000010204" | |
2342 | expected=${expect_dst_mac}${expect_src_mac}08004500001c000000003f110100${src_ip}${dst_ip}0035111100080000 | |
2343 | ||
2344 | $PYTHON "$top_srcdir/utilities/ovs-pcap.in" hv1/vif2-tx.pcap | trim_zeros > received.packets | |
2345 | echo $expected | trim_zeros > expout | |
2346 | AT_CHECK([cat received.packets], [0], [expout]) | |
2347 | ||
2348 | ||
2349 | as hv1 | |
2350 | OVS_APP_EXIT_AND_WAIT([ovn-controller]) | |
2351 | OVS_APP_EXIT_AND_WAIT([ovs-vswitchd]) | |
2352 | OVS_APP_EXIT_AND_WAIT([ovsdb-server]) | |
2353 | ||
2354 | as ovn-sb | |
2355 | OVS_APP_EXIT_AND_WAIT([ovsdb-server]) | |
2356 | ||
2357 | as ovn-nb | |
2358 | OVS_APP_EXIT_AND_WAIT([ovsdb-server]) | |
2359 | ||
2360 | as northd | |
2361 | OVS_APP_EXIT_AND_WAIT([ovn-northd]) | |
2362 | ||
2363 | as main | |
2364 | OVS_APP_EXIT_AND_WAIT([ovs-vswitchd]) | |
2365 | OVS_APP_EXIT_AND_WAIT([ovsdb-server]) | |
2366 | ||
2367 | AT_CLEANUP | |
2368 | ||
28dc3fe9 SR |
2369 | AT_SETUP([ovn -- 2 HVs, 3 LS, 1 lport/LS, 2 peer LRs, static routes]) |
2370 | AT_KEYWORDS([ovnstaticroutespeer]) | |
2371 | AT_SKIP_IF([test $HAVE_PYTHON = no]) | |
2372 | ovn_start | |
2373 | ||
2374 | # Logical network: | |
2375 | # Two LRs - R1 and R2 that are connected to each other as peers in 20.0.0.0/24 | |
2376 | # network. R1 has switchess foo (192.168.1.0/24) | |
2377 | # connected to it. | |
2378 | # R2 has alice (172.16.1.0/24) and bob (172.16.2.0/24) connected to it. | |
2379 | ||
2380 | ovn-nbctl create Logical_Router name=R1 | |
2381 | ovn-nbctl create Logical_Router name=R2 | |
2382 | ||
2383 | ovn-nbctl lswitch-add foo | |
2384 | ovn-nbctl lswitch-add alice | |
2385 | ovn-nbctl lswitch-add bob | |
2386 | ||
2387 | # Connect foo to R1 | |
2388 | ovn-nbctl -- --id=@lrp create Logical_Router_port name=foo \ | |
2389 | network=192.168.1.1/24 mac=\"00:00:00:01:02:03\" -- add Logical_Router R1 \ | |
2390 | ports @lrp -- lport-add foo rp-foo | |
2391 | ||
2392 | ovn-nbctl set Logical_port rp-foo type=router options:router-port=foo \ | |
2393 | addresses=\"00:00:00:01:02:03\" | |
2394 | ||
2395 | # Connect alice to R2 | |
2396 | ovn-nbctl -- --id=@lrp create Logical_Router_port name=alice \ | |
2397 | network=172.16.1.1/24 mac=\"00:00:00:01:02:04\" -- add Logical_Router R2 \ | |
2398 | ports @lrp -- lport-add alice rp-alice | |
2399 | ||
2400 | ovn-nbctl set Logical_port rp-alice type=router options:router-port=alice \ | |
2401 | addresses=\"00:00:00:01:02:04\" | |
2402 | ||
2403 | # Connect bob to R2 | |
2404 | ovn-nbctl -- --id=@lrp create Logical_Router_port name=bob \ | |
2405 | network=172.16.2.1/24 mac=\"00:00:00:01:02:05\" -- add Logical_Router R2 \ | |
2406 | ports @lrp -- lport-add bob rp-bob | |
2407 | ||
2408 | ovn-nbctl set Logical_port rp-bob type=router options:router-port=bob \ | |
2409 | addresses=\"00:00:00:01:02:05\" | |
2410 | ||
2411 | # Connect R1 to R2 | |
2412 | lrp1_uuid=`ovn-nbctl -- --id=@lrp create Logical_Router_port name=R1_R2 \ | |
2413 | network="20.0.0.1/24" mac=\"00:00:00:02:03:04\" \ | |
2414 | -- add Logical_Router R1 ports @lrp` | |
2415 | ||
2416 | lrp2_uuid=`ovn-nbctl -- --id=@lrp create Logical_Router_port name=R2_R1 \ | |
2417 | network="20.0.0.2/24" mac=\"00:00:00:02:03:05\" \ | |
2418 | -- add Logical_Router R2 ports @lrp` | |
2419 | ||
2420 | ovn-nbctl set logical_router_port $lrp1_uuid peer="R2_R1" | |
2421 | ovn-nbctl set logical_router_port $lrp2_uuid peer="R1_R2" | |
2422 | ||
2423 | #install static routes | |
2424 | ovn-nbctl -- --id=@lrt create Logical_Router_Static_Route \ | |
2425 | ip_prefix=172.16.1.0/24 nexthop=20.0.0.2 -- add Logical_Router \ | |
2426 | R1 static_routes @lrt | |
2427 | ||
2428 | ovn-nbctl -- --id=@lrt create Logical_Router_Static_Route \ | |
2429 | ip_prefix=172.16.2.0/24 nexthop=20.0.0.2 output_port=R1_R2 -- add Logical_Router \ | |
2430 | R1 static_routes @lrt | |
2431 | ||
2432 | ovn-nbctl -- --id=@lrt create Logical_Router_Static_Route \ | |
2433 | ip_prefix=192.168.1.0/24 nexthop=20.0.0.1 -- add Logical_Router \ | |
2434 | R2 static_routes @lrt | |
2435 | ||
2436 | # Create logical port foo1 in foo | |
2437 | ovn-nbctl lport-add foo foo1 \ | |
2438 | -- lport-set-addresses foo1 "f0:00:00:01:02:03 192.168.1.2" | |
2439 | ||
2440 | # Create logical port alice1 in alice | |
2441 | ovn-nbctl lport-add alice alice1 \ | |
2442 | -- lport-set-addresses alice1 "f0:00:00:01:02:04 172.16.1.2" | |
2443 | ||
2444 | # Create logical port bob1 in bob | |
2445 | ovn-nbctl lport-add bob bob1 \ | |
2446 | -- lport-set-addresses bob1 "f0:00:00:01:02:05 172.16.2.2" | |
2447 | ||
2448 | # Create two hypervisor and create OVS ports corresponding to logical ports. | |
2449 | net_add n1 | |
2450 | ||
2451 | sim_add hv1 | |
2452 | as hv1 | |
2453 | ovs-vsctl add-br br-phys | |
2454 | ovn_attach n1 br-phys 192.168.0.1 | |
2455 | ovs-vsctl -- add-port br-int hv1-vif1 -- \ | |
2456 | set interface hv1-vif1 external-ids:iface-id=foo1 \ | |
2457 | options:tx_pcap=hv1/vif1-tx.pcap \ | |
2458 | options:rxq_pcap=hv1/vif1-rx.pcap \ | |
2459 | ofport-request=1 | |
2460 | ||
2461 | ovs-vsctl -- add-port br-int hv1-vif2 -- \ | |
2462 | set interface hv1-vif2 external-ids:iface-id=alice1 \ | |
2463 | options:tx_pcap=hv1/vif2-tx.pcap \ | |
2464 | options:rxq_pcap=hv1/vif2-rx.pcap \ | |
2465 | ofport-request=2 | |
2466 | ||
2467 | sim_add hv2 | |
2468 | as hv2 | |
2469 | ovs-vsctl add-br br-phys | |
2470 | ovn_attach n1 br-phys 192.168.0.2 | |
2471 | ovs-vsctl -- add-port br-int hv2-vif1 -- \ | |
2472 | set interface hv2-vif1 external-ids:iface-id=bob1 \ | |
2473 | options:tx_pcap=hv2/vif1-tx.pcap \ | |
2474 | options:rxq_pcap=hv2/vif1-rx.pcap \ | |
2475 | ofport-request=1 | |
2476 | ||
2477 | ||
2478 | # Pre-populate the hypervisors' ARP tables so that we don't lose any | |
2479 | # packets for ARP resolution (native tunneling doesn't queue packets | |
2480 | # for ARP resolution). | |
2481 | ovn_populate_arp | |
2482 | ||
2483 | # Allow some time for ovn-northd and ovn-controller to catch up. | |
2484 | # XXX This should be more systematic. | |
2485 | sleep 1 | |
2486 | ||
2487 | ip_to_hex() { | |
2488 | printf "%02x%02x%02x%02x" "$@" | |
2489 | } | |
2490 | trim_zeros() { | |
2491 | sed 's/\(00\)\{1,\}$//' | |
2492 | } | |
2493 | ||
2494 | # Send ip packets between foo1 and alice1 | |
2495 | src_mac="f00000010203" | |
2496 | dst_mac="000000010203" | |
2497 | src_ip=`ip_to_hex 192 168 1 2` | |
2498 | dst_ip=`ip_to_hex 172 16 1 2` | |
2499 | packet=${dst_mac}${src_mac}08004500001c0000000040110000${src_ip}${dst_ip}0035111100080000 | |
2500 | as hv1 ovs-appctl netdev-dummy/receive hv1-vif1 $packet | |
2501 | ||
2502 | # Send ip packets between foo1 and bob1 | |
2503 | src_mac="f00000010203" | |
2504 | dst_mac="000000010203" | |
2505 | src_ip=`ip_to_hex 192 168 1 2` | |
2506 | dst_ip=`ip_to_hex 172 16 2 2` | |
2507 | packet=${dst_mac}${src_mac}08004500001c0000000040110000${src_ip}${dst_ip}0035111100080000 | |
2508 | as hv1 ovs-appctl netdev-dummy/receive hv1-vif1 $packet | |
2509 | ||
2510 | echo "---------NB dump-----" | |
2511 | ovn-nbctl show | |
2512 | echo "---------------------" | |
2513 | ovn-nbctl list logical_router | |
2514 | echo "---------------------" | |
2515 | ovn-nbctl list logical_router_port | |
2516 | echo "---------------------" | |
2517 | ||
2518 | echo "---------SB dump-----" | |
2519 | ovn-sbctl list datapath_binding | |
2520 | echo "---------------------" | |
2521 | ovn-sbctl list port_binding | |
2522 | echo "---------------------" | |
2523 | ||
2524 | echo "------ hv1 dump ----------" | |
2525 | as hv1 ovs-ofctl dump-flows br-int | |
2526 | echo "------ hv2 dump ----------" | |
2527 | as hv2 ovs-ofctl dump-flows br-int | |
2528 | ||
2529 | # Packet to Expect at bob1 | |
2530 | src_mac="000000010205" | |
2531 | dst_mac="f00000010205" | |
2532 | src_ip=`ip_to_hex 192 168 1 2` | |
2533 | dst_ip=`ip_to_hex 172 16 2 2` | |
2534 | expected=${dst_mac}${src_mac}08004500001c000000003e110200${src_ip}${dst_ip}0035111100080000 | |
2535 | ||
2536 | $PYTHON "$top_srcdir/utilities/ovs-pcap.in" hv2/vif1-tx.pcap | trim_zeros > received.packets | |
2537 | echo $expected | trim_zeros > expout | |
2538 | AT_CHECK([cat received.packets], [0], [expout]) | |
2539 | ||
2540 | # Packet to Expect at alice1 | |
2541 | src_mac="000000010204" | |
2542 | dst_mac="f00000010204" | |
2543 | src_ip=`ip_to_hex 192 168 1 2` | |
2544 | dst_ip=`ip_to_hex 172 16 1 2` | |
2545 | expected=${dst_mac}${src_mac}08004500001c000000003e110200${src_ip}${dst_ip}0035111100080000 | |
2546 | ||
2547 | $PYTHON "$top_srcdir/utilities/ovs-pcap.in" hv1/vif2-tx.pcap | trim_zeros > received1.packets | |
2548 | echo $expected | trim_zeros > expout | |
2549 | AT_CHECK([cat received1.packets], [0], [expout]) | |
2550 | ||
2551 | for sim in hv1 hv2; do | |
2552 | as $sim | |
2553 | OVS_APP_EXIT_AND_WAIT([ovn-controller]) | |
2554 | OVS_APP_EXIT_AND_WAIT([ovs-vswitchd]) | |
2555 | OVS_APP_EXIT_AND_WAIT([ovsdb-server]) | |
2556 | done | |
2557 | ||
2558 | as ovn-sb | |
2559 | OVS_APP_EXIT_AND_WAIT([ovsdb-server]) | |
2560 | ||
2561 | as ovn-nb | |
2562 | OVS_APP_EXIT_AND_WAIT([ovsdb-server]) | |
2563 | ||
2564 | as northd | |
2565 | OVS_APP_EXIT_AND_WAIT([ovn-northd]) | |
2566 | ||
2567 | as main | |
2568 | OVS_APP_EXIT_AND_WAIT([ovs-vswitchd]) | |
2569 | OVS_APP_EXIT_AND_WAIT([ovsdb-server]) | |
2570 | ||
2571 | AT_CLEANUP | |
5412db30 | 2572 | |
0ee8aaf6 RR |
2573 | AT_SETUP([ovn -- send gratuitous arp on localnet]) |
2574 | AT_KEYWORDS([ovn]) | |
2575 | ovn_start | |
2576 | ovn-nbctl lswitch-add lsw0 | |
2577 | net_add n1 | |
2578 | sim_add hv | |
2579 | as hv | |
2580 | ovs-vsctl \ | |
2581 | -- add-br br-phys \ | |
2582 | -- add-br br-eth0 | |
2583 | ||
2584 | ovn_attach n1 br-phys 192.168.0.1 | |
2585 | ||
2586 | AT_CHECK([ovs-vsctl set Open_vSwitch . external-ids:ovn-bridge-mappings=physnet1:br-eth0]) | |
2587 | AT_CHECK([ovs-vsctl add-port br-eth0 snoopvif -- set Interface snoopvif options:tx_pcap=hv/snoopvif-tx.pcap options:rxq_pcap=hv/snoopvif-rx.pcap]) | |
2588 | ||
2589 | # Create a vif. | |
2590 | AT_CHECK([ovn-nbctl lport-add lsw0 localvif1]) | |
2591 | AT_CHECK([ovn-nbctl lport-set-addresses localvif1 "f0:00:00:00:00:01 192.168.1.2"]) | |
2592 | AT_CHECK([ovn-nbctl lport-set-port-security localvif1 "f0:00:00:00:00:01"]) | |
2593 | ||
2594 | # Create a localnet port. | |
2595 | AT_CHECK([ovn-nbctl lport-add lsw0 ln_port]) | |
2596 | AT_CHECK([ovn-nbctl lport-set-addresses ln_port unknown]) | |
2597 | AT_CHECK([ovn-nbctl lport-set-type ln_port localnet]) | |
2598 | AT_CHECK([ovn-nbctl lport-set-options ln_port network_name=physnet1]) | |
2599 | ||
2600 | AT_CHECK([ovs-vsctl add-port br-int localvif1 -- set Interface localvif1 external_ids:iface-id=localvif1]) | |
2601 | ||
2602 | # Wait for packet to be received. | |
2603 | OVS_WAIT_UNTIL([test `wc -c < "hv/snoopvif-tx.pcap"` -ge 50]) | |
2604 | trim_zeros() { | |
2605 | sed 's/\(00\)\{1,\}$//' | |
2606 | } | |
2607 | $PYTHON "$top_srcdir/utilities/ovs-pcap.in" hv/snoopvif-tx.pcap | trim_zeros > packets | |
2608 | expected="fffffffffffff0000000000108060001080006040001f00000000001c0a80102000000000000c0a80102" | |
2609 | echo $expected > expout | |
2610 | AT_CHECK([sort packets], [0], [expout]) | |
2611 | cat packets | |
2612 | ||
2613 | # Delete the localnet ports. | |
2614 | AT_CHECK([ovs-vsctl del-port localvif1]) | |
2615 | AT_CHECK([ovn-nbctl lport-del ln_port]) | |
2616 | ||
2617 | as hv | |
2618 | OVS_APP_EXIT_AND_WAIT([ovn-controller]) | |
2619 | OVS_APP_EXIT_AND_WAIT([ovs-vswitchd]) | |
2620 | OVS_APP_EXIT_AND_WAIT([ovsdb-server]) | |
2621 | ||
2622 | as ovn-sb | |
2623 | OVS_APP_EXIT_AND_WAIT([ovsdb-server]) | |
2624 | ||
2625 | as ovn-nb | |
2626 | OVS_APP_EXIT_AND_WAIT([ovsdb-server]) | |
2627 | ||
2628 | as northd | |
2629 | OVS_APP_EXIT_AND_WAIT([ovn-northd]) | |
2630 | ||
2631 | as main | |
2632 | OVS_APP_EXIT_AND_WAIT([ovs-vswitchd]) | |
2633 | OVS_APP_EXIT_AND_WAIT([ovsdb-server]) | |
2634 | ||
2635 | AT_CLEANUP | |
75cf9d2b GS |
2636 | |
2637 | AT_SETUP([ovn -- 2 HVs, 3 LRs connected via LS, static routes]) | |
2638 | AT_KEYWORDS([ovnstaticroutes]) | |
2639 | AT_SKIP_IF([test $HAVE_PYTHON = no]) | |
2640 | ovn_start | |
2641 | ||
2642 | # Logical network: | |
2643 | # Three LRs - R1, R2 and R3 that are connected to each other via LS "join" | |
2644 | # in 20.0.0.0/24 network. R1 has switchess foo (192.168.1.0/24) | |
2645 | # connected to it. R2 has alice (172.16.1.0/24) and R3 has bob (10.32.1.0/24) | |
2646 | # connected to it. | |
2647 | ||
2648 | ovn-nbctl create Logical_Router name=R1 | |
2649 | ovn-nbctl create Logical_Router name=R2 | |
2650 | ovn-nbctl create Logical_Router name=R3 | |
2651 | ||
2652 | ovn-nbctl lswitch-add foo | |
2653 | ovn-nbctl lswitch-add alice | |
2654 | ovn-nbctl lswitch-add bob | |
2655 | ovn-nbctl lswitch-add join | |
2656 | ||
2657 | # Connect foo to R1 | |
2658 | ovn-nbctl -- --id=@lrp create Logical_Router_port name=foo \ | |
2659 | network=192.168.1.1/24 mac=\"00:00:01:01:02:03\" -- add Logical_Router R1 \ | |
2660 | ports @lrp -- lport-add foo rp-foo | |
2661 | ||
2662 | ovn-nbctl set Logical_port rp-foo type=router options:router-port=foo \ | |
2663 | addresses=\"00:00:01:01:02:03\" | |
2664 | ||
2665 | # Connect alice to R2 | |
2666 | ovn-nbctl -- --id=@lrp create Logical_Router_port name=alice \ | |
2667 | network=172.16.1.1/24 mac=\"00:00:02:01:02:03\" -- add Logical_Router R2 \ | |
2668 | ports @lrp -- lport-add alice rp-alice | |
2669 | ||
2670 | ovn-nbctl set Logical_port rp-alice type=router options:router-port=alice \ | |
2671 | addresses=\"00:00:02:01:02:03\" | |
2672 | ||
2673 | # Connect bob to R3 | |
2674 | ovn-nbctl -- --id=@lrp create Logical_Router_port name=bob \ | |
2675 | network=10.32.1.1/24 mac=\"00:00:03:01:02:03\" -- add Logical_Router R3 \ | |
2676 | ports @lrp -- lport-add bob rp-bob | |
2677 | ||
2678 | ovn-nbctl set Logical_port rp-bob type=router options:router-port=bob \ | |
2679 | addresses=\"00:00:03:01:02:03\" | |
2680 | ||
2681 | # Connect R1 to join | |
2682 | ovn-nbctl -- --id=@lrp create Logical_Router_port name=R1_join \ | |
2683 | network=20.0.0.1/24 mac=\"00:00:04:01:02:03\" -- add Logical_Router R1 \ | |
2684 | ports @lrp -- lport-add join r1-join | |
2685 | ||
2686 | ovn-nbctl set Logical_port r1-join type=router options:router-port=R1_join \ | |
2687 | addresses='"00:00:04:01:02:03"' | |
2688 | ||
2689 | # Connect R2 to join | |
2690 | ovn-nbctl -- --id=@lrp create Logical_Router_port name=R2_join \ | |
2691 | network=20.0.0.2/24 mac=\"00:00:04:01:02:04\" -- add Logical_Router R2 \ | |
2692 | ports @lrp -- lport-add join r2-join | |
2693 | ||
2694 | ovn-nbctl set Logical_port r2-join type=router options:router-port=R2_join \ | |
2695 | addresses='"00:00:04:01:02:04"' | |
2696 | ||
2697 | ||
2698 | # Connect R3 to join | |
2699 | ovn-nbctl -- --id=@lrp create Logical_Router_port name=R3_join \ | |
2700 | network=20.0.0.3/24 mac=\"00:00:04:01:02:05\" -- add Logical_Router R3 \ | |
2701 | ports @lrp -- lport-add join r3-join | |
2702 | ||
2703 | ovn-nbctl set Logical_port r3-join type=router options:router-port=R3_join \ | |
2704 | addresses='"00:00:04:01:02:05"' | |
2705 | ||
2706 | #install static routes | |
2707 | ovn-nbctl -- --id=@lrt create Logical_Router_Static_Route \ | |
2708 | ip_prefix=172.16.1.0/24 nexthop=20.0.0.2 -- add Logical_Router \ | |
2709 | R1 static_routes @lrt | |
2710 | ||
2711 | ovn-nbctl -- --id=@lrt create Logical_Router_Static_Route \ | |
2712 | ip_prefix=10.32.1.0/24 nexthop=20.0.0.3 -- add Logical_Router \ | |
2713 | R1 static_routes @lrt | |
2714 | ||
2715 | ovn-nbctl -- --id=@lrt create Logical_Router_Static_Route \ | |
2716 | ip_prefix=192.168.1.0/24 nexthop=20.0.0.1 -- add Logical_Router \ | |
2717 | R2 static_routes @lrt | |
2718 | ||
2719 | ovn-nbctl -- --id=@lrt create Logical_Router_Static_Route \ | |
2720 | ip_prefix=10.32.1.0/24 nexthop=20.0.0.3 -- add Logical_Router \ | |
2721 | R2 static_routes @lrt | |
2722 | ||
2723 | ovn-nbctl -- --id=@lrt create Logical_Router_Static_Route \ | |
2724 | ip_prefix=192.168.1.0/24 nexthop=20.0.0.1 -- add Logical_Router \ | |
2725 | R3 static_routes @lrt | |
2726 | ||
2727 | ovn-nbctl -- --id=@lrt create Logical_Router_Static_Route \ | |
2728 | ip_prefix=172.16.1.0/24 nexthop=20.0.0.2 -- add Logical_Router \ | |
2729 | R3 static_routes @lrt | |
2730 | ||
2731 | # Create logical port foo1 in foo | |
2732 | ovn-nbctl lport-add foo foo1 \ | |
2733 | -- lport-set-addresses foo1 "f0:00:00:01:02:03 192.168.1.2" | |
2734 | ||
2735 | # Create logical port alice1 in alice | |
2736 | ovn-nbctl lport-add alice alice1 \ | |
2737 | -- lport-set-addresses alice1 "f0:00:00:01:02:04 172.16.1.2" | |
2738 | ||
2739 | # Create logical port bob1 in bob | |
2740 | ovn-nbctl lport-add bob bob1 \ | |
2741 | -- lport-set-addresses bob1 "f0:00:00:01:02:05 10.32.1.2" | |
2742 | ||
2743 | # Create two hypervisor and create OVS ports corresponding to logical ports. | |
2744 | net_add n1 | |
2745 | ||
2746 | sim_add hv1 | |
2747 | as hv1 | |
2748 | ovs-vsctl add-br br-phys | |
2749 | ovn_attach n1 br-phys 192.168.0.1 | |
2750 | ovs-vsctl -- add-port br-int hv1-vif1 -- \ | |
2751 | set interface hv1-vif1 external-ids:iface-id=foo1 \ | |
2752 | options:tx_pcap=hv1/vif1-tx.pcap \ | |
2753 | options:rxq_pcap=hv1/vif1-rx.pcap \ | |
2754 | ofport-request=1 | |
2755 | ||
2756 | ovs-vsctl -- add-port br-int hv1-vif2 -- \ | |
2757 | set interface hv1-vif2 external-ids:iface-id=alice1 \ | |
2758 | options:tx_pcap=hv1/vif2-tx.pcap \ | |
2759 | options:rxq_pcap=hv1/vif2-rx.pcap \ | |
2760 | ofport-request=2 | |
2761 | ||
2762 | sim_add hv2 | |
2763 | as hv2 | |
2764 | ovs-vsctl add-br br-phys | |
2765 | ovn_attach n1 br-phys 192.168.0.2 | |
2766 | ovs-vsctl -- add-port br-int hv2-vif1 -- \ | |
2767 | set interface hv2-vif1 external-ids:iface-id=bob1 \ | |
2768 | options:tx_pcap=hv2/vif1-tx.pcap \ | |
2769 | options:rxq_pcap=hv2/vif1-rx.pcap \ | |
2770 | ofport-request=1 | |
2771 | ||
2772 | ||
2773 | # Pre-populate the hypervisors' ARP tables so that we don't lose any | |
2774 | # packets for ARP resolution (native tunneling doesn't queue packets | |
2775 | # for ARP resolution). | |
2776 | ovn_populate_arp | |
2777 | ||
2778 | # Allow some time for ovn-northd and ovn-controller to catch up. | |
2779 | # XXX This should be more systematic. | |
2780 | sleep 1 | |
2781 | ||
2782 | ip_to_hex() { | |
2783 | printf "%02x%02x%02x%02x" "$@" | |
2784 | } | |
2785 | trim_zeros() { | |
2786 | sed 's/\(00\)\{1,\}$//' | |
2787 | } | |
2788 | ||
2789 | # Send ip packets between foo1 and alice1 | |
2790 | src_mac="f00000010203" | |
2791 | dst_mac="000001010203" | |
2792 | src_ip=`ip_to_hex 192 168 1 2` | |
2793 | dst_ip=`ip_to_hex 172 16 1 2` | |
2794 | packet=${dst_mac}${src_mac}08004500001c0000000040110000${src_ip}${dst_ip}0035111100080000 | |
2795 | as hv1 ovs-appctl netdev-dummy/receive hv1-vif1 $packet | |
2796 | as hv1 ovs-appctl ofproto/trace br-int in_port=1 $packet | |
2797 | ||
2798 | # Send ip packets between foo1 and bob1 | |
2799 | src_mac="f00000010203" | |
2800 | dst_mac="000001010203" | |
2801 | src_ip=`ip_to_hex 192 168 1 2` | |
2802 | dst_ip=`ip_to_hex 10 32 1 2` | |
2803 | packet=${dst_mac}${src_mac}08004500001c0000000040110000${src_ip}${dst_ip}0035111100080000 | |
2804 | as hv1 ovs-appctl netdev-dummy/receive hv1-vif1 $packet | |
2805 | ||
2806 | echo "---------NB dump-----" | |
2807 | ovn-nbctl show | |
2808 | echo "---------------------" | |
2809 | ovn-nbctl list logical_router | |
2810 | echo "---------------------" | |
2811 | ovn-nbctl list logical_router_port | |
2812 | echo "---------------------" | |
2813 | ||
2814 | echo "---------SB dump-----" | |
2815 | ovn-sbctl list datapath_binding | |
2816 | echo "---------------------" | |
2817 | ovn-sbctl list port_binding | |
2818 | echo "---------------------" | |
2819 | ovn-sbctl dump-flows | |
2820 | echo "---------------------" | |
2821 | ||
2822 | echo "------ hv1 dump ----------" | |
2823 | as hv1 ovs-ofctl show br-int | |
2824 | as hv1 ovs-ofctl dump-flows br-int | |
2825 | echo "------ hv2 dump ----------" | |
2826 | as hv2 ovs-ofctl show br-int | |
2827 | as hv2 ovs-ofctl dump-flows br-int | |
2828 | echo "----------------------------" | |
2829 | ||
2830 | # Packet to Expect at bob1 | |
2831 | src_mac="000003010203" | |
2832 | dst_mac="f00000010205" | |
2833 | src_ip=`ip_to_hex 192 168 1 2` | |
2834 | dst_ip=`ip_to_hex 10 32 1 2` | |
2835 | expected=${dst_mac}${src_mac}08004500001c000000003e110200${src_ip}${dst_ip}0035111100080000 | |
2836 | ||
2837 | $PYTHON "$top_srcdir/utilities/ovs-pcap.in" hv2/vif1-tx.pcap | trim_zeros > received.packets | |
2838 | echo $expected | trim_zeros > expout | |
2839 | AT_CHECK([cat received.packets], [0], [expout]) | |
2840 | ||
2841 | # Packet to Expect at alice1 | |
2842 | src_mac="000002010203" | |
2843 | dst_mac="f00000010204" | |
2844 | src_ip=`ip_to_hex 192 168 1 2` | |
2845 | dst_ip=`ip_to_hex 172 16 1 2` | |
2846 | expected=${dst_mac}${src_mac}08004500001c000000003e110200${src_ip}${dst_ip}0035111100080000 | |
2847 | ||
2848 | $PYTHON "$top_srcdir/utilities/ovs-pcap.in" hv1/vif2-tx.pcap | trim_zeros > received1.packets | |
2849 | echo $expected | trim_zeros > expout | |
2850 | AT_CHECK([cat received1.packets], [0], [expout]) | |
2851 | ||
2852 | for sim in hv1 hv2; do | |
2853 | as $sim | |
2854 | OVS_APP_EXIT_AND_WAIT([ovn-controller]) | |
2855 | OVS_APP_EXIT_AND_WAIT([ovs-vswitchd]) | |
2856 | OVS_APP_EXIT_AND_WAIT([ovsdb-server]) | |
2857 | done | |
2858 | ||
2859 | as ovn-sb | |
2860 | OVS_APP_EXIT_AND_WAIT([ovsdb-server]) | |
2861 | ||
2862 | as ovn-nb | |
2863 | OVS_APP_EXIT_AND_WAIT([ovsdb-server]) | |
2864 | ||
2865 | as northd | |
2866 | OVS_APP_EXIT_AND_WAIT([ovn-northd]) | |
2867 | ||
2868 | as main | |
2869 | OVS_APP_EXIT_AND_WAIT([ovs-vswitchd]) | |
2870 | OVS_APP_EXIT_AND_WAIT([ovsdb-server]) | |
2871 | ||
2872 | AT_CLEANUP | |
c1645003 GS |
2873 | |
2874 | ||
2875 | AT_SETUP([ovn -- 2 HVs, 2 LRs connected via LS, gateway router]) | |
2876 | AT_KEYWORDS([ovngatewayrouter]) | |
2877 | AT_SKIP_IF([test $HAVE_PYTHON = no]) | |
2878 | ovn_start | |
2879 | ||
2880 | # Logical network: | |
2881 | # Two LRs - R1 and R2 that are connected to each other via LS "join" | |
2882 | # in 20.0.0.0/24 network. R1 has switchess foo (192.168.1.0/24) | |
2883 | # connected to it. R2 has alice (172.16.1.0/24) connected to it. | |
2884 | # R2 is a gateway router. | |
2885 | ||
2886 | ||
2887 | ||
2888 | # Create two hypervisor and create OVS ports corresponding to logical ports. | |
2889 | net_add n1 | |
2890 | ||
2891 | sim_add hv1 | |
2892 | as hv1 | |
2893 | ovs-vsctl add-br br-phys | |
2894 | ovn_attach n1 br-phys 192.168.0.1 | |
2895 | ovs-vsctl -- add-port br-int hv1-vif1 -- \ | |
2896 | set interface hv1-vif1 external-ids:iface-id=foo1 \ | |
2897 | options:tx_pcap=hv1/vif1-tx.pcap \ | |
2898 | options:rxq_pcap=hv1/vif1-rx.pcap \ | |
2899 | ofport-request=1 | |
2900 | ||
2901 | ||
2902 | sim_add hv2 | |
2903 | as hv2 | |
2904 | ovs-vsctl add-br br-phys | |
2905 | ovn_attach n1 br-phys 192.168.0.2 | |
2906 | ovs-vsctl -- add-port br-int hv2-vif1 -- \ | |
2907 | set interface hv2-vif1 external-ids:iface-id=alice1 \ | |
2908 | options:tx_pcap=hv2/vif1-tx.pcap \ | |
2909 | options:rxq_pcap=hv2/vif1-rx.pcap \ | |
2910 | ofport-request=1 | |
2911 | ||
2912 | # Pre-populate the hypervisors' ARP tables so that we don't lose any | |
2913 | # packets for ARP resolution (native tunneling doesn't queue packets | |
2914 | # for ARP resolution). | |
2915 | ovn_populate_arp | |
2916 | ||
2917 | ovn-nbctl create Logical_Router name=R1 | |
2918 | ovn-nbctl create Logical_Router name=R2 options:chassis="hv2" | |
2919 | ||
2920 | ovn-nbctl lswitch-add foo | |
2921 | ovn-nbctl lswitch-add alice | |
2922 | ovn-nbctl lswitch-add join | |
2923 | ||
2924 | # Connect foo to R1 | |
2925 | ovn-nbctl -- --id=@lrp create Logical_Router_port name=foo \ | |
2926 | network=192.168.1.1/24 mac=\"00:00:01:01:02:03\" -- add Logical_Router R1 \ | |
2927 | ports @lrp -- lport-add foo rp-foo | |
2928 | ||
2929 | ovn-nbctl set Logical_port rp-foo type=router options:router-port=foo \ | |
2930 | addresses=\"00:00:01:01:02:03\" | |
2931 | ||
2932 | # Connect alice to R2 | |
2933 | ovn-nbctl -- --id=@lrp create Logical_Router_port name=alice \ | |
2934 | network=172.16.1.1/24 mac=\"00:00:02:01:02:03\" -- add Logical_Router R2 \ | |
2935 | ports @lrp -- lport-add alice rp-alice | |
2936 | ||
2937 | ovn-nbctl set Logical_port rp-alice type=router options:router-port=alice \ | |
2938 | addresses=\"00:00:02:01:02:03\" | |
2939 | ||
2940 | ||
2941 | # Connect R1 to join | |
2942 | ovn-nbctl -- --id=@lrp create Logical_Router_port name=R1_join \ | |
2943 | network=20.0.0.1/24 mac=\"00:00:04:01:02:03\" -- add Logical_Router R1 \ | |
2944 | ports @lrp -- lport-add join r1-join | |
2945 | ||
2946 | ovn-nbctl set Logical_port r1-join type=router options:router-port=R1_join \ | |
2947 | addresses='"00:00:04:01:02:03"' | |
2948 | ||
2949 | # Connect R2 to join | |
2950 | ovn-nbctl -- --id=@lrp create Logical_Router_port name=R2_join \ | |
2951 | network=20.0.0.2/24 mac=\"00:00:04:01:02:04\" -- add Logical_Router R2 \ | |
2952 | ports @lrp -- lport-add join r2-join | |
2953 | ||
2954 | ovn-nbctl set Logical_port r2-join type=router options:router-port=R2_join \ | |
2955 | addresses='"00:00:04:01:02:04"' | |
2956 | ||
2957 | ||
2958 | #install static routes | |
2959 | ovn-nbctl -- --id=@lrt create Logical_Router_Static_Route \ | |
2960 | ip_prefix=172.16.1.0/24 nexthop=20.0.0.2 -- add Logical_Router \ | |
2961 | R1 static_routes @lrt | |
2962 | ||
2963 | ovn-nbctl -- --id=@lrt create Logical_Router_Static_Route \ | |
2964 | ip_prefix=192.168.1.0/24 nexthop=20.0.0.1 -- add Logical_Router \ | |
2965 | R2 static_routes @lrt | |
2966 | ||
2967 | # Create logical port foo1 in foo | |
2968 | ovn-nbctl lport-add foo foo1 \ | |
2969 | -- lport-set-addresses foo1 "f0:00:00:01:02:03 192.168.1.2" | |
2970 | ||
2971 | # Create logical port alice1 in alice | |
2972 | ovn-nbctl lport-add alice alice1 \ | |
2973 | -- lport-set-addresses alice1 "f0:00:00:01:02:04 172.16.1.2" | |
2974 | ||
2975 | ||
2976 | # Allow some time for ovn-northd and ovn-controller to catch up. | |
2977 | # XXX This should be more systematic. | |
2978 | sleep 2 | |
2979 | ||
2980 | ip_to_hex() { | |
2981 | printf "%02x%02x%02x%02x" "$@" | |
2982 | } | |
2983 | trim_zeros() { | |
2984 | sed 's/\(00\)\{1,\}$//' | |
2985 | } | |
2986 | ||
2987 | # Send ip packets between foo1 and alice1 | |
2988 | src_mac="f00000010203" | |
2989 | dst_mac="000001010203" | |
2990 | src_ip=`ip_to_hex 192 168 1 2` | |
2991 | dst_ip=`ip_to_hex 172 16 1 2` | |
2992 | packet=${dst_mac}${src_mac}08004500001c0000000040110000${src_ip}${dst_ip}0035111100080000 | |
2993 | ||
2994 | echo "---------NB dump-----" | |
2995 | ovn-nbctl show | |
2996 | echo "---------------------" | |
2997 | ovn-nbctl list logical_router | |
2998 | echo "---------------------" | |
2999 | ovn-nbctl list logical_router_port | |
3000 | echo "---------------------" | |
3001 | ||
3002 | echo "---------SB dump-----" | |
3003 | ovn-sbctl list datapath_binding | |
3004 | echo "---------------------" | |
3005 | ovn-sbctl list port_binding | |
3006 | echo "---------------------" | |
3007 | ovn-sbctl dump-flows | |
3008 | echo "---------------------" | |
3009 | ovn-sbctl list chassis | |
3010 | ovn-sbctl list encap | |
3011 | echo "---------------------" | |
3012 | ||
3013 | echo "------ hv1 dump ----------" | |
3014 | as hv1 ovs-ofctl show br-int | |
3015 | as hv1 ovs-ofctl dump-flows br-int | |
3016 | echo "------ hv2 dump ----------" | |
3017 | as hv2 ovs-ofctl show br-int | |
3018 | as hv2 ovs-ofctl dump-flows br-int | |
3019 | echo "----------------------------" | |
3020 | ||
3021 | # Packet to Expect at alice1 | |
3022 | src_mac="000002010203" | |
3023 | dst_mac="f00000010204" | |
3024 | src_ip=`ip_to_hex 192 168 1 2` | |
3025 | dst_ip=`ip_to_hex 172 16 1 2` | |
3026 | expected=${dst_mac}${src_mac}08004500001c000000003e110200${src_ip}${dst_ip}0035111100080000 | |
3027 | ||
3028 | ||
3029 | as hv1 ovs-appctl netdev-dummy/receive hv1-vif1 $packet | |
3030 | as hv1 ovs-appctl ofproto/trace br-int in_port=1 $packet | |
3031 | ||
3032 | $PYTHON "$top_srcdir/utilities/ovs-pcap.in" hv2/vif1-tx.pcap | trim_zeros > received1.packets | |
3033 | echo $expected | trim_zeros > expout | |
3034 | AT_CHECK([cat received1.packets], [0], [expout]) | |
3035 | ||
3036 | for sim in hv1 hv2; do | |
3037 | as $sim | |
3038 | OVS_APP_EXIT_AND_WAIT([ovn-controller]) | |
3039 | OVS_APP_EXIT_AND_WAIT([ovs-vswitchd]) | |
3040 | OVS_APP_EXIT_AND_WAIT([ovsdb-server]) | |
3041 | done | |
3042 | ||
3043 | as ovn-sb | |
3044 | OVS_APP_EXIT_AND_WAIT([ovsdb-server]) | |
3045 | ||
3046 | as ovn-nb | |
3047 | OVS_APP_EXIT_AND_WAIT([ovsdb-server]) | |
3048 | ||
3049 | as northd | |
3050 | OVS_APP_EXIT_AND_WAIT([ovn-northd]) | |
3051 | ||
3052 | as main | |
3053 | OVS_APP_EXIT_AND_WAIT([ovs-vswitchd]) | |
3054 | OVS_APP_EXIT_AND_WAIT([ovsdb-server]) | |
3055 | ||
3056 | AT_CLEANUP |