]>
Commit | Line | Data |
---|---|---|
1 | # SPDX-License-Identifier: GPL-2.0 | |
2 | VERSION = 5 | |
3 | PATCHLEVEL = 11 | |
4 | SUBLEVEL = 0 | |
5 | EXTRAVERSION = -rc6 | |
6 | NAME = Kleptomaniac Octopus | |
7 | ||
8 | # *DOCUMENTATION* | |
9 | # To see a list of typical targets execute "make help" | |
10 | # More info can be located in ./README | |
11 | # Comments in this file are targeted only to the developer, do not | |
12 | # expect to learn how to build the kernel reading this file. | |
13 | ||
14 | $(if $(filter __%, $(MAKECMDGOALS)), \ | |
15 | $(error targets prefixed with '__' are only for internal use)) | |
16 | ||
17 | # That's our default target when none is given on the command line | |
18 | PHONY := __all | |
19 | __all: | |
20 | ||
21 | # We are using a recursive build, so we need to do a little thinking | |
22 | # to get the ordering right. | |
23 | # | |
24 | # Most importantly: sub-Makefiles should only ever modify files in | |
25 | # their own directory. If in some directory we have a dependency on | |
26 | # a file in another dir (which doesn't happen often, but it's often | |
27 | # unavoidable when linking the built-in.a targets which finally | |
28 | # turn into vmlinux), we will call a sub make in that other dir, and | |
29 | # after that we are sure that everything which is in that other dir | |
30 | # is now up to date. | |
31 | # | |
32 | # The only cases where we need to modify files which have global | |
33 | # effects are thus separated out and done before the recursive | |
34 | # descending is started. They are now explicitly listed as the | |
35 | # prepare rule. | |
36 | ||
37 | ifneq ($(sub_make_done),1) | |
38 | ||
39 | # Do not use make's built-in rules and variables | |
40 | # (this increases performance and avoids hard-to-debug behaviour) | |
41 | MAKEFLAGS += -rR | |
42 | ||
43 | # Avoid funny character set dependencies | |
44 | unexport LC_ALL | |
45 | LC_COLLATE=C | |
46 | LC_NUMERIC=C | |
47 | export LC_COLLATE LC_NUMERIC | |
48 | ||
49 | # Avoid interference with shell env settings | |
50 | unexport GREP_OPTIONS | |
51 | ||
52 | # Beautify output | |
53 | # --------------------------------------------------------------------------- | |
54 | # | |
55 | # Normally, we echo the whole command before executing it. By making | |
56 | # that echo $($(quiet)$(cmd)), we now have the possibility to set | |
57 | # $(quiet) to choose other forms of output instead, e.g. | |
58 | # | |
59 | # quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@ | |
60 | # cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $< | |
61 | # | |
62 | # If $(quiet) is empty, the whole command will be printed. | |
63 | # If it is set to "quiet_", only the short version will be printed. | |
64 | # If it is set to "silent_", nothing will be printed at all, since | |
65 | # the variable $(silent_cmd_cc_o_c) doesn't exist. | |
66 | # | |
67 | # A simple variant is to prefix commands with $(Q) - that's useful | |
68 | # for commands that shall be hidden in non-verbose mode. | |
69 | # | |
70 | # $(Q)ln $@ :< | |
71 | # | |
72 | # If KBUILD_VERBOSE equals 0 then the above command will be hidden. | |
73 | # If KBUILD_VERBOSE equals 1 then the above command is displayed. | |
74 | # If KBUILD_VERBOSE equals 2 then give the reason why each target is rebuilt. | |
75 | # | |
76 | # To put more focus on warnings, be less verbose as default | |
77 | # Use 'make V=1' to see the full commands | |
78 | ||
79 | ifeq ("$(origin V)", "command line") | |
80 | KBUILD_VERBOSE = $(V) | |
81 | endif | |
82 | ifndef KBUILD_VERBOSE | |
83 | KBUILD_VERBOSE = 0 | |
84 | endif | |
85 | ||
86 | ifeq ($(KBUILD_VERBOSE),1) | |
87 | quiet = | |
88 | Q = | |
89 | else | |
90 | quiet=quiet_ | |
91 | Q = @ | |
92 | endif | |
93 | ||
94 | # If the user is running make -s (silent mode), suppress echoing of | |
95 | # commands | |
96 | ||
97 | ifneq ($(findstring s,$(filter-out --%,$(MAKEFLAGS))),) | |
98 | quiet=silent_ | |
99 | endif | |
100 | ||
101 | export quiet Q KBUILD_VERBOSE | |
102 | ||
103 | # Kbuild will save output files in the current working directory. | |
104 | # This does not need to match to the root of the kernel source tree. | |
105 | # | |
106 | # For example, you can do this: | |
107 | # | |
108 | # cd /dir/to/store/output/files; make -f /dir/to/kernel/source/Makefile | |
109 | # | |
110 | # If you want to save output files in a different location, there are | |
111 | # two syntaxes to specify it. | |
112 | # | |
113 | # 1) O= | |
114 | # Use "make O=dir/to/store/output/files/" | |
115 | # | |
116 | # 2) Set KBUILD_OUTPUT | |
117 | # Set the environment variable KBUILD_OUTPUT to point to the output directory. | |
118 | # export KBUILD_OUTPUT=dir/to/store/output/files/; make | |
119 | # | |
120 | # The O= assignment takes precedence over the KBUILD_OUTPUT environment | |
121 | # variable. | |
122 | ||
123 | # Do we want to change the working directory? | |
124 | ifeq ("$(origin O)", "command line") | |
125 | KBUILD_OUTPUT := $(O) | |
126 | endif | |
127 | ||
128 | ifneq ($(KBUILD_OUTPUT),) | |
129 | # Make's built-in functions such as $(abspath ...), $(realpath ...) cannot | |
130 | # expand a shell special character '~'. We use a somewhat tedious way here. | |
131 | abs_objtree := $(shell mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) && pwd) | |
132 | $(if $(abs_objtree),, \ | |
133 | $(error failed to create output directory "$(KBUILD_OUTPUT)")) | |
134 | ||
135 | # $(realpath ...) resolves symlinks | |
136 | abs_objtree := $(realpath $(abs_objtree)) | |
137 | else | |
138 | abs_objtree := $(CURDIR) | |
139 | endif # ifneq ($(KBUILD_OUTPUT),) | |
140 | ||
141 | ifeq ($(abs_objtree),$(CURDIR)) | |
142 | # Suppress "Entering directory ..." unless we are changing the work directory. | |
143 | MAKEFLAGS += --no-print-directory | |
144 | else | |
145 | need-sub-make := 1 | |
146 | endif | |
147 | ||
148 | abs_srctree := $(realpath $(dir $(lastword $(MAKEFILE_LIST)))) | |
149 | ||
150 | ifneq ($(words $(subst :, ,$(abs_srctree))), 1) | |
151 | $(error source directory cannot contain spaces or colons) | |
152 | endif | |
153 | ||
154 | ifneq ($(abs_srctree),$(abs_objtree)) | |
155 | # Look for make include files relative to root of kernel src | |
156 | # | |
157 | # This does not become effective immediately because MAKEFLAGS is re-parsed | |
158 | # once after the Makefile is read. We need to invoke sub-make. | |
159 | MAKEFLAGS += --include-dir=$(abs_srctree) | |
160 | need-sub-make := 1 | |
161 | endif | |
162 | ||
163 | this-makefile := $(lastword $(MAKEFILE_LIST)) | |
164 | ||
165 | ifneq ($(filter 3.%,$(MAKE_VERSION)),) | |
166 | # 'MAKEFLAGS += -rR' does not immediately become effective for GNU Make 3.x | |
167 | # We need to invoke sub-make to avoid implicit rules in the top Makefile. | |
168 | need-sub-make := 1 | |
169 | # Cancel implicit rules for this Makefile. | |
170 | $(this-makefile): ; | |
171 | endif | |
172 | ||
173 | export abs_srctree abs_objtree | |
174 | export sub_make_done := 1 | |
175 | ||
176 | ifeq ($(need-sub-make),1) | |
177 | ||
178 | PHONY += $(MAKECMDGOALS) __sub-make | |
179 | ||
180 | $(filter-out $(this-makefile), $(MAKECMDGOALS)) __all: __sub-make | |
181 | @: | |
182 | ||
183 | # Invoke a second make in the output directory, passing relevant variables | |
184 | __sub-make: | |
185 | $(Q)$(MAKE) -C $(abs_objtree) -f $(abs_srctree)/Makefile $(MAKECMDGOALS) | |
186 | ||
187 | endif # need-sub-make | |
188 | endif # sub_make_done | |
189 | ||
190 | # We process the rest of the Makefile if this is the final invocation of make | |
191 | ifeq ($(need-sub-make),) | |
192 | ||
193 | # Do not print "Entering directory ...", | |
194 | # but we want to display it when entering to the output directory | |
195 | # so that IDEs/editors are able to understand relative filenames. | |
196 | MAKEFLAGS += --no-print-directory | |
197 | ||
198 | # Call a source code checker (by default, "sparse") as part of the | |
199 | # C compilation. | |
200 | # | |
201 | # Use 'make C=1' to enable checking of only re-compiled files. | |
202 | # Use 'make C=2' to enable checking of *all* source files, regardless | |
203 | # of whether they are re-compiled or not. | |
204 | # | |
205 | # See the file "Documentation/dev-tools/sparse.rst" for more details, | |
206 | # including where to get the "sparse" utility. | |
207 | ||
208 | ifeq ("$(origin C)", "command line") | |
209 | KBUILD_CHECKSRC = $(C) | |
210 | endif | |
211 | ifndef KBUILD_CHECKSRC | |
212 | KBUILD_CHECKSRC = 0 | |
213 | endif | |
214 | ||
215 | # Use make M=dir or set the environment variable KBUILD_EXTMOD to specify the | |
216 | # directory of external module to build. Setting M= takes precedence. | |
217 | ifeq ("$(origin M)", "command line") | |
218 | KBUILD_EXTMOD := $(M) | |
219 | endif | |
220 | ||
221 | $(if $(word 2, $(KBUILD_EXTMOD)), \ | |
222 | $(error building multiple external modules is not supported)) | |
223 | ||
224 | export KBUILD_CHECKSRC KBUILD_EXTMOD | |
225 | ||
226 | extmod-prefix = $(if $(KBUILD_EXTMOD),$(KBUILD_EXTMOD)/) | |
227 | ||
228 | ifeq ($(abs_srctree),$(abs_objtree)) | |
229 | # building in the source tree | |
230 | srctree := . | |
231 | building_out_of_srctree := | |
232 | else | |
233 | ifeq ($(abs_srctree)/,$(dir $(abs_objtree))) | |
234 | # building in a subdirectory of the source tree | |
235 | srctree := .. | |
236 | else | |
237 | srctree := $(abs_srctree) | |
238 | endif | |
239 | building_out_of_srctree := 1 | |
240 | endif | |
241 | ||
242 | ifneq ($(KBUILD_ABS_SRCTREE),) | |
243 | srctree := $(abs_srctree) | |
244 | endif | |
245 | ||
246 | objtree := . | |
247 | VPATH := $(srctree) | |
248 | ||
249 | export building_out_of_srctree srctree objtree VPATH | |
250 | ||
251 | # To make sure we do not include .config for any of the *config targets | |
252 | # catch them early, and hand them over to scripts/kconfig/Makefile | |
253 | # It is allowed to specify more targets when calling make, including | |
254 | # mixing *config targets and build targets. | |
255 | # For example 'make oldconfig all'. | |
256 | # Detect when mixed targets is specified, and make a second invocation | |
257 | # of make so .config is not included in this case either (for *config). | |
258 | ||
259 | version_h := include/generated/uapi/linux/version.h | |
260 | old_version_h := include/linux/version.h | |
261 | ||
262 | clean-targets := %clean mrproper cleandocs | |
263 | no-dot-config-targets := $(clean-targets) \ | |
264 | cscope gtags TAGS tags help% %docs check% coccicheck \ | |
265 | $(version_h) headers headers_% archheaders archscripts \ | |
266 | %asm-generic kernelversion %src-pkg dt_binding_check \ | |
267 | outputmakefile | |
268 | no-sync-config-targets := $(no-dot-config-targets) %install kernelrelease | |
269 | single-targets := %.a %.i %.ko %.lds %.ll %.lst %.mod %.o %.s %.symtypes %/ | |
270 | ||
271 | config-build := | |
272 | mixed-build := | |
273 | need-config := 1 | |
274 | may-sync-config := 1 | |
275 | single-build := | |
276 | ||
277 | ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),) | |
278 | ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),) | |
279 | need-config := | |
280 | endif | |
281 | endif | |
282 | ||
283 | ifneq ($(filter $(no-sync-config-targets), $(MAKECMDGOALS)),) | |
284 | ifeq ($(filter-out $(no-sync-config-targets), $(MAKECMDGOALS)),) | |
285 | may-sync-config := | |
286 | endif | |
287 | endif | |
288 | ||
289 | ifneq ($(KBUILD_EXTMOD),) | |
290 | may-sync-config := | |
291 | endif | |
292 | ||
293 | ifeq ($(KBUILD_EXTMOD),) | |
294 | ifneq ($(filter %config,$(MAKECMDGOALS)),) | |
295 | config-build := 1 | |
296 | ifneq ($(words $(MAKECMDGOALS)),1) | |
297 | mixed-build := 1 | |
298 | endif | |
299 | endif | |
300 | endif | |
301 | ||
302 | # We cannot build single targets and the others at the same time | |
303 | ifneq ($(filter $(single-targets), $(MAKECMDGOALS)),) | |
304 | single-build := 1 | |
305 | ifneq ($(filter-out $(single-targets), $(MAKECMDGOALS)),) | |
306 | mixed-build := 1 | |
307 | endif | |
308 | endif | |
309 | ||
310 | # For "make -j clean all", "make -j mrproper defconfig all", etc. | |
311 | ifneq ($(filter $(clean-targets),$(MAKECMDGOALS)),) | |
312 | ifneq ($(filter-out $(clean-targets),$(MAKECMDGOALS)),) | |
313 | mixed-build := 1 | |
314 | endif | |
315 | endif | |
316 | ||
317 | # install and modules_install need also be processed one by one | |
318 | ifneq ($(filter install,$(MAKECMDGOALS)),) | |
319 | ifneq ($(filter modules_install,$(MAKECMDGOALS)),) | |
320 | mixed-build := 1 | |
321 | endif | |
322 | endif | |
323 | ||
324 | ifdef mixed-build | |
325 | # =========================================================================== | |
326 | # We're called with mixed targets (*config and build targets). | |
327 | # Handle them one by one. | |
328 | ||
329 | PHONY += $(MAKECMDGOALS) __build_one_by_one | |
330 | ||
331 | $(MAKECMDGOALS): __build_one_by_one | |
332 | @: | |
333 | ||
334 | __build_one_by_one: | |
335 | $(Q)set -e; \ | |
336 | for i in $(MAKECMDGOALS); do \ | |
337 | $(MAKE) -f $(srctree)/Makefile $$i; \ | |
338 | done | |
339 | ||
340 | else # !mixed-build | |
341 | ||
342 | include scripts/Kbuild.include | |
343 | ||
344 | # Read KERNELRELEASE from include/config/kernel.release (if it exists) | |
345 | KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null) | |
346 | KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION) | |
347 | export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION | |
348 | ||
349 | include scripts/subarch.include | |
350 | ||
351 | # Cross compiling and selecting different set of gcc/bin-utils | |
352 | # --------------------------------------------------------------------------- | |
353 | # | |
354 | # When performing cross compilation for other architectures ARCH shall be set | |
355 | # to the target architecture. (See arch/* for the possibilities). | |
356 | # ARCH can be set during invocation of make: | |
357 | # make ARCH=ia64 | |
358 | # Another way is to have ARCH set in the environment. | |
359 | # The default ARCH is the host where make is executed. | |
360 | ||
361 | # CROSS_COMPILE specify the prefix used for all executables used | |
362 | # during compilation. Only gcc and related bin-utils executables | |
363 | # are prefixed with $(CROSS_COMPILE). | |
364 | # CROSS_COMPILE can be set on the command line | |
365 | # make CROSS_COMPILE=ia64-linux- | |
366 | # Alternatively CROSS_COMPILE can be set in the environment. | |
367 | # Default value for CROSS_COMPILE is not to prefix executables | |
368 | # Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile | |
369 | ARCH ?= $(SUBARCH) | |
370 | ||
371 | # Architecture as present in compile.h | |
372 | UTS_MACHINE := $(ARCH) | |
373 | SRCARCH := $(ARCH) | |
374 | ||
375 | # Additional ARCH settings for x86 | |
376 | ifeq ($(ARCH),i386) | |
377 | SRCARCH := x86 | |
378 | endif | |
379 | ifeq ($(ARCH),x86_64) | |
380 | SRCARCH := x86 | |
381 | endif | |
382 | ||
383 | # Additional ARCH settings for sparc | |
384 | ifeq ($(ARCH),sparc32) | |
385 | SRCARCH := sparc | |
386 | endif | |
387 | ifeq ($(ARCH),sparc64) | |
388 | SRCARCH := sparc | |
389 | endif | |
390 | ||
391 | # Additional ARCH settings for sh | |
392 | ifeq ($(ARCH),sh64) | |
393 | SRCARCH := sh | |
394 | endif | |
395 | ||
396 | KCONFIG_CONFIG ?= .config | |
397 | export KCONFIG_CONFIG | |
398 | ||
399 | # Default file for 'make defconfig'. This may be overridden by arch-Makefile. | |
400 | export KBUILD_DEFCONFIG := defconfig | |
401 | ||
402 | # SHELL used by kbuild | |
403 | CONFIG_SHELL := sh | |
404 | ||
405 | HOST_LFS_CFLAGS := $(shell getconf LFS_CFLAGS 2>/dev/null) | |
406 | HOST_LFS_LDFLAGS := $(shell getconf LFS_LDFLAGS 2>/dev/null) | |
407 | HOST_LFS_LIBS := $(shell getconf LFS_LIBS 2>/dev/null) | |
408 | ||
409 | ifneq ($(LLVM),) | |
410 | HOSTCC = clang | |
411 | HOSTCXX = clang++ | |
412 | else | |
413 | HOSTCC = gcc | |
414 | HOSTCXX = g++ | |
415 | endif | |
416 | ||
417 | export KBUILD_USERCFLAGS := -Wall -Wmissing-prototypes -Wstrict-prototypes \ | |
418 | -O2 -fomit-frame-pointer -std=gnu89 | |
419 | export KBUILD_USERLDFLAGS := | |
420 | ||
421 | KBUILD_HOSTCFLAGS := $(KBUILD_USERCFLAGS) $(HOST_LFS_CFLAGS) $(HOSTCFLAGS) | |
422 | KBUILD_HOSTCXXFLAGS := -Wall -O2 $(HOST_LFS_CFLAGS) $(HOSTCXXFLAGS) | |
423 | KBUILD_HOSTLDFLAGS := $(HOST_LFS_LDFLAGS) $(HOSTLDFLAGS) | |
424 | KBUILD_HOSTLDLIBS := $(HOST_LFS_LIBS) $(HOSTLDLIBS) | |
425 | ||
426 | # Make variables (CC, etc...) | |
427 | CPP = $(CC) -E | |
428 | ifneq ($(LLVM),) | |
429 | CC = clang | |
430 | LD = ld.lld | |
431 | AR = llvm-ar | |
432 | NM = llvm-nm | |
433 | OBJCOPY = llvm-objcopy | |
434 | OBJDUMP = llvm-objdump | |
435 | READELF = llvm-readelf | |
436 | STRIP = llvm-strip | |
437 | else | |
438 | CC = $(CROSS_COMPILE)gcc | |
439 | LD = $(CROSS_COMPILE)ld | |
440 | AR = $(CROSS_COMPILE)ar | |
441 | NM = $(CROSS_COMPILE)nm | |
442 | OBJCOPY = $(CROSS_COMPILE)objcopy | |
443 | OBJDUMP = $(CROSS_COMPILE)objdump | |
444 | READELF = $(CROSS_COMPILE)readelf | |
445 | STRIP = $(CROSS_COMPILE)strip | |
446 | endif | |
447 | PAHOLE = pahole | |
448 | RESOLVE_BTFIDS = $(objtree)/tools/bpf/resolve_btfids/resolve_btfids | |
449 | LEX = flex | |
450 | YACC = bison | |
451 | AWK = awk | |
452 | INSTALLKERNEL := installkernel | |
453 | DEPMOD = depmod | |
454 | PERL = perl | |
455 | PYTHON = python | |
456 | PYTHON3 = python3 | |
457 | CHECK = sparse | |
458 | BASH = bash | |
459 | KGZIP = gzip | |
460 | KBZIP2 = bzip2 | |
461 | KLZOP = lzop | |
462 | LZMA = lzma | |
463 | LZ4 = lz4c | |
464 | XZ = xz | |
465 | ZSTD = zstd | |
466 | ||
467 | CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \ | |
468 | -Wbitwise -Wno-return-void -Wno-unknown-attribute $(CF) | |
469 | NOSTDINC_FLAGS := | |
470 | CFLAGS_MODULE = | |
471 | AFLAGS_MODULE = | |
472 | LDFLAGS_MODULE = | |
473 | CFLAGS_KERNEL = | |
474 | AFLAGS_KERNEL = | |
475 | LDFLAGS_vmlinux = | |
476 | ||
477 | # Use USERINCLUDE when you must reference the UAPI directories only. | |
478 | USERINCLUDE := \ | |
479 | -I$(srctree)/arch/$(SRCARCH)/include/uapi \ | |
480 | -I$(objtree)/arch/$(SRCARCH)/include/generated/uapi \ | |
481 | -I$(srctree)/include/uapi \ | |
482 | -I$(objtree)/include/generated/uapi \ | |
483 | -include $(srctree)/include/linux/kconfig.h | |
484 | ||
485 | # Use LINUXINCLUDE when you must reference the include/ directory. | |
486 | # Needed to be compatible with the O= option | |
487 | LINUXINCLUDE := \ | |
488 | -I$(srctree)/arch/$(SRCARCH)/include \ | |
489 | -I$(objtree)/arch/$(SRCARCH)/include/generated \ | |
490 | $(if $(building_out_of_srctree),-I$(srctree)/include) \ | |
491 | -I$(objtree)/include \ | |
492 | $(USERINCLUDE) | |
493 | ||
494 | KBUILD_AFLAGS := -D__ASSEMBLY__ -fno-PIE | |
495 | KBUILD_CFLAGS := -Wall -Wundef -Werror=strict-prototypes -Wno-trigraphs \ | |
496 | -fno-strict-aliasing -fno-common -fshort-wchar -fno-PIE \ | |
497 | -Werror=implicit-function-declaration -Werror=implicit-int \ | |
498 | -Werror=return-type -Wno-format-security \ | |
499 | -std=gnu89 | |
500 | KBUILD_CPPFLAGS := -D__KERNEL__ | |
501 | KBUILD_AFLAGS_KERNEL := | |
502 | KBUILD_CFLAGS_KERNEL := | |
503 | KBUILD_AFLAGS_MODULE := -DMODULE | |
504 | KBUILD_CFLAGS_MODULE := -DMODULE | |
505 | KBUILD_LDFLAGS_MODULE := | |
506 | KBUILD_LDFLAGS := | |
507 | CLANG_FLAGS := | |
508 | ||
509 | export ARCH SRCARCH CONFIG_SHELL BASH HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE LD CC | |
510 | export CPP AR NM STRIP OBJCOPY OBJDUMP READELF PAHOLE RESOLVE_BTFIDS LEX YACC AWK INSTALLKERNEL | |
511 | export PERL PYTHON PYTHON3 CHECK CHECKFLAGS MAKE UTS_MACHINE HOSTCXX | |
512 | export KGZIP KBZIP2 KLZOP LZMA LZ4 XZ ZSTD | |
513 | export KBUILD_HOSTCXXFLAGS KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS LDFLAGS_MODULE | |
514 | ||
515 | export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS KBUILD_LDFLAGS | |
516 | export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE | |
517 | export KBUILD_AFLAGS AFLAGS_KERNEL AFLAGS_MODULE | |
518 | export KBUILD_AFLAGS_MODULE KBUILD_CFLAGS_MODULE KBUILD_LDFLAGS_MODULE | |
519 | export KBUILD_AFLAGS_KERNEL KBUILD_CFLAGS_KERNEL | |
520 | ||
521 | # Files to ignore in find ... statements | |
522 | ||
523 | export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o \ | |
524 | -name CVS -o -name .pc -o -name .hg -o -name .git \) \ | |
525 | -prune -o | |
526 | export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \ | |
527 | --exclude CVS --exclude .pc --exclude .hg --exclude .git | |
528 | ||
529 | # =========================================================================== | |
530 | # Rules shared between *config targets and build targets | |
531 | ||
532 | # Basic helpers built in scripts/basic/ | |
533 | PHONY += scripts_basic | |
534 | scripts_basic: | |
535 | $(Q)$(MAKE) $(build)=scripts/basic | |
536 | $(Q)rm -f .tmp_quiet_recordmcount | |
537 | ||
538 | PHONY += outputmakefile | |
539 | # Before starting out-of-tree build, make sure the source tree is clean. | |
540 | # outputmakefile generates a Makefile in the output directory, if using a | |
541 | # separate output directory. This allows convenient use of make in the | |
542 | # output directory. | |
543 | # At the same time when output Makefile generated, generate .gitignore to | |
544 | # ignore whole output directory | |
545 | outputmakefile: | |
546 | ifdef building_out_of_srctree | |
547 | $(Q)if [ -f $(srctree)/.config -o \ | |
548 | -d $(srctree)/include/config -o \ | |
549 | -d $(srctree)/arch/$(SRCARCH)/include/generated ]; then \ | |
550 | echo >&2 "***"; \ | |
551 | echo >&2 "*** The source tree is not clean, please run 'make$(if $(findstring command line, $(origin ARCH)), ARCH=$(ARCH)) mrproper'"; \ | |
552 | echo >&2 "*** in $(abs_srctree)";\ | |
553 | echo >&2 "***"; \ | |
554 | false; \ | |
555 | fi | |
556 | $(Q)ln -fsn $(srctree) source | |
557 | $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile $(srctree) | |
558 | $(Q)test -e .gitignore || \ | |
559 | { echo "# this is build directory, ignore it"; echo "*"; } > .gitignore | |
560 | endif | |
561 | ||
562 | ifneq ($(shell $(CC) --version 2>&1 | head -n 1 | grep clang),) | |
563 | ifneq ($(CROSS_COMPILE),) | |
564 | CLANG_FLAGS += --target=$(notdir $(CROSS_COMPILE:%-=%)) | |
565 | GCC_TOOLCHAIN_DIR := $(dir $(shell which $(CROSS_COMPILE)elfedit)) | |
566 | CLANG_FLAGS += --prefix=$(GCC_TOOLCHAIN_DIR)$(notdir $(CROSS_COMPILE)) | |
567 | GCC_TOOLCHAIN := $(realpath $(GCC_TOOLCHAIN_DIR)/..) | |
568 | endif | |
569 | ifneq ($(GCC_TOOLCHAIN),) | |
570 | CLANG_FLAGS += --gcc-toolchain=$(GCC_TOOLCHAIN) | |
571 | endif | |
572 | ifneq ($(LLVM_IAS),1) | |
573 | CLANG_FLAGS += -no-integrated-as | |
574 | endif | |
575 | CLANG_FLAGS += -Werror=unknown-warning-option | |
576 | KBUILD_CFLAGS += $(CLANG_FLAGS) | |
577 | KBUILD_AFLAGS += $(CLANG_FLAGS) | |
578 | export CLANG_FLAGS | |
579 | endif | |
580 | ||
581 | # The expansion should be delayed until arch/$(SRCARCH)/Makefile is included. | |
582 | # Some architectures define CROSS_COMPILE in arch/$(SRCARCH)/Makefile. | |
583 | # CC_VERSION_TEXT is referenced from Kconfig (so it needs export), | |
584 | # and from include/config/auto.conf.cmd to detect the compiler upgrade. | |
585 | CC_VERSION_TEXT = $(shell $(CC) --version 2>/dev/null | head -n 1) | |
586 | ||
587 | ifdef config-build | |
588 | # =========================================================================== | |
589 | # *config targets only - make sure prerequisites are updated, and descend | |
590 | # in scripts/kconfig to make the *config target | |
591 | ||
592 | # Read arch specific Makefile to set KBUILD_DEFCONFIG as needed. | |
593 | # KBUILD_DEFCONFIG may point out an alternative default configuration | |
594 | # used for 'make defconfig' | |
595 | include arch/$(SRCARCH)/Makefile | |
596 | export KBUILD_DEFCONFIG KBUILD_KCONFIG CC_VERSION_TEXT | |
597 | ||
598 | config: outputmakefile scripts_basic FORCE | |
599 | $(Q)$(MAKE) $(build)=scripts/kconfig $@ | |
600 | ||
601 | %config: outputmakefile scripts_basic FORCE | |
602 | $(Q)$(MAKE) $(build)=scripts/kconfig $@ | |
603 | ||
604 | else #!config-build | |
605 | # =========================================================================== | |
606 | # Build targets only - this includes vmlinux, arch specific targets, clean | |
607 | # targets and others. In general all targets except *config targets. | |
608 | ||
609 | # If building an external module we do not care about the all: rule | |
610 | # but instead __all depend on modules | |
611 | PHONY += all | |
612 | ifeq ($(KBUILD_EXTMOD),) | |
613 | __all: all | |
614 | else | |
615 | __all: modules | |
616 | endif | |
617 | ||
618 | # Decide whether to build built-in, modular, or both. | |
619 | # Normally, just do built-in. | |
620 | ||
621 | KBUILD_MODULES := | |
622 | KBUILD_BUILTIN := 1 | |
623 | ||
624 | # If we have only "make modules", don't compile built-in objects. | |
625 | ifeq ($(MAKECMDGOALS),modules) | |
626 | KBUILD_BUILTIN := | |
627 | endif | |
628 | ||
629 | # If we have "make <whatever> modules", compile modules | |
630 | # in addition to whatever we do anyway. | |
631 | # Just "make" or "make all" shall build modules as well | |
632 | ||
633 | ifneq ($(filter all modules nsdeps %compile_commands.json clang-%,$(MAKECMDGOALS)),) | |
634 | KBUILD_MODULES := 1 | |
635 | endif | |
636 | ||
637 | ifeq ($(MAKECMDGOALS),) | |
638 | KBUILD_MODULES := 1 | |
639 | endif | |
640 | ||
641 | export KBUILD_MODULES KBUILD_BUILTIN | |
642 | ||
643 | ifdef need-config | |
644 | include include/config/auto.conf | |
645 | endif | |
646 | ||
647 | ifeq ($(KBUILD_EXTMOD),) | |
648 | # Objects we will link into vmlinux / subdirs we need to visit | |
649 | core-y := init/ usr/ | |
650 | drivers-y := drivers/ sound/ | |
651 | drivers-$(CONFIG_SAMPLES) += samples/ | |
652 | drivers-y += net/ virt/ | |
653 | libs-y := lib/ | |
654 | endif # KBUILD_EXTMOD | |
655 | ||
656 | # The all: target is the default when no target is given on the | |
657 | # command line. | |
658 | # This allow a user to issue only 'make' to build a kernel including modules | |
659 | # Defaults to vmlinux, but the arch makefile usually adds further targets | |
660 | all: vmlinux | |
661 | ||
662 | CFLAGS_GCOV := -fprofile-arcs -ftest-coverage \ | |
663 | $(call cc-option,-fno-tree-loop-im) \ | |
664 | $(call cc-disable-warning,maybe-uninitialized,) | |
665 | export CFLAGS_GCOV | |
666 | ||
667 | # The arch Makefiles can override CC_FLAGS_FTRACE. We may also append it later. | |
668 | ifdef CONFIG_FUNCTION_TRACER | |
669 | CC_FLAGS_FTRACE := -pg | |
670 | endif | |
671 | ||
672 | RETPOLINE_CFLAGS_GCC := -mindirect-branch=thunk-extern -mindirect-branch-register | |
673 | RETPOLINE_VDSO_CFLAGS_GCC := -mindirect-branch=thunk-inline -mindirect-branch-register | |
674 | RETPOLINE_CFLAGS_CLANG := -mretpoline-external-thunk | |
675 | RETPOLINE_VDSO_CFLAGS_CLANG := -mretpoline | |
676 | RETPOLINE_CFLAGS := $(call cc-option,$(RETPOLINE_CFLAGS_GCC),$(call cc-option,$(RETPOLINE_CFLAGS_CLANG))) | |
677 | RETPOLINE_VDSO_CFLAGS := $(call cc-option,$(RETPOLINE_VDSO_CFLAGS_GCC),$(call cc-option,$(RETPOLINE_VDSO_CFLAGS_CLANG))) | |
678 | export RETPOLINE_CFLAGS | |
679 | export RETPOLINE_VDSO_CFLAGS | |
680 | ||
681 | include arch/$(SRCARCH)/Makefile | |
682 | ||
683 | ifdef need-config | |
684 | ifdef may-sync-config | |
685 | # Read in dependencies to all Kconfig* files, make sure to run syncconfig if | |
686 | # changes are detected. This should be included after arch/$(SRCARCH)/Makefile | |
687 | # because some architectures define CROSS_COMPILE there. | |
688 | include include/config/auto.conf.cmd | |
689 | ||
690 | $(KCONFIG_CONFIG): | |
691 | @echo >&2 '***' | |
692 | @echo >&2 '*** Configuration file "$@" not found!' | |
693 | @echo >&2 '***' | |
694 | @echo >&2 '*** Please run some configurator (e.g. "make oldconfig" or' | |
695 | @echo >&2 '*** "make menuconfig" or "make xconfig").' | |
696 | @echo >&2 '***' | |
697 | @/bin/false | |
698 | ||
699 | # The actual configuration files used during the build are stored in | |
700 | # include/generated/ and include/config/. Update them if .config is newer than | |
701 | # include/config/auto.conf (which mirrors .config). | |
702 | # | |
703 | # This exploits the 'multi-target pattern rule' trick. | |
704 | # The syncconfig should be executed only once to make all the targets. | |
705 | # (Note: use the grouped target '&:' when we bump to GNU Make 4.3) | |
706 | quiet_cmd_syncconfig = SYNC $@ | |
707 | cmd_syncconfig = $(MAKE) -f $(srctree)/Makefile syncconfig | |
708 | ||
709 | %/config/auto.conf %/config/auto.conf.cmd %/generated/autoconf.h: $(KCONFIG_CONFIG) | |
710 | +$(call cmd,syncconfig) | |
711 | else # !may-sync-config | |
712 | # External modules and some install targets need include/generated/autoconf.h | |
713 | # and include/config/auto.conf but do not care if they are up-to-date. | |
714 | # Use auto.conf to trigger the test | |
715 | PHONY += include/config/auto.conf | |
716 | ||
717 | include/config/auto.conf: | |
718 | $(Q)test -e include/generated/autoconf.h -a -e $@ || ( \ | |
719 | echo >&2; \ | |
720 | echo >&2 " ERROR: Kernel configuration is invalid."; \ | |
721 | echo >&2 " include/generated/autoconf.h or $@ are missing.";\ | |
722 | echo >&2 " Run 'make oldconfig && make prepare' on kernel src to fix it."; \ | |
723 | echo >&2 ; \ | |
724 | /bin/false) | |
725 | ||
726 | endif # may-sync-config | |
727 | endif # need-config | |
728 | ||
729 | KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks,) | |
730 | KBUILD_CFLAGS += $(call cc-disable-warning,frame-address,) | |
731 | KBUILD_CFLAGS += $(call cc-disable-warning, format-truncation) | |
732 | KBUILD_CFLAGS += $(call cc-disable-warning, format-overflow) | |
733 | KBUILD_CFLAGS += $(call cc-disable-warning, address-of-packed-member) | |
734 | ||
735 | ifdef CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE | |
736 | KBUILD_CFLAGS += -O2 | |
737 | else ifdef CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3 | |
738 | KBUILD_CFLAGS += -O3 | |
739 | else ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE | |
740 | KBUILD_CFLAGS += -Os | |
741 | endif | |
742 | ||
743 | # Tell gcc to never replace conditional load with a non-conditional one | |
744 | KBUILD_CFLAGS += $(call cc-option,--param=allow-store-data-races=0) | |
745 | KBUILD_CFLAGS += $(call cc-option,-fno-allow-store-data-races) | |
746 | ||
747 | ifdef CONFIG_READABLE_ASM | |
748 | # Disable optimizations that make assembler listings hard to read. | |
749 | # reorder blocks reorders the control in the function | |
750 | # ipa clone creates specialized cloned functions | |
751 | # partial inlining inlines only parts of functions | |
752 | KBUILD_CFLAGS += $(call cc-option,-fno-reorder-blocks,) \ | |
753 | $(call cc-option,-fno-ipa-cp-clone,) \ | |
754 | $(call cc-option,-fno-partial-inlining) | |
755 | endif | |
756 | ||
757 | ifneq ($(CONFIG_FRAME_WARN),0) | |
758 | KBUILD_CFLAGS += -Wframe-larger-than=$(CONFIG_FRAME_WARN) | |
759 | endif | |
760 | ||
761 | stackp-flags-y := -fno-stack-protector | |
762 | stackp-flags-$(CONFIG_STACKPROTECTOR) := -fstack-protector | |
763 | stackp-flags-$(CONFIG_STACKPROTECTOR_STRONG) := -fstack-protector-strong | |
764 | ||
765 | KBUILD_CFLAGS += $(stackp-flags-y) | |
766 | ||
767 | ifdef CONFIG_CC_IS_CLANG | |
768 | KBUILD_CPPFLAGS += -Qunused-arguments | |
769 | KBUILD_CFLAGS += -Wno-format-invalid-specifier | |
770 | KBUILD_CFLAGS += -Wno-gnu | |
771 | # CLANG uses a _MergedGlobals as optimization, but this breaks modpost, as the | |
772 | # source of a reference will be _MergedGlobals and not on of the whitelisted names. | |
773 | # See modpost pattern 2 | |
774 | KBUILD_CFLAGS += -mno-global-merge | |
775 | else | |
776 | ||
777 | # These warnings generated too much noise in a regular build. | |
778 | # Use make W=1 to enable them (see scripts/Makefile.extrawarn) | |
779 | KBUILD_CFLAGS += -Wno-unused-but-set-variable | |
780 | ||
781 | # Warn about unmarked fall-throughs in switch statement. | |
782 | # Disabled for clang while comment to attribute conversion happens and | |
783 | # https://github.com/ClangBuiltLinux/linux/issues/636 is discussed. | |
784 | KBUILD_CFLAGS += $(call cc-option,-Wimplicit-fallthrough,) | |
785 | endif | |
786 | ||
787 | KBUILD_CFLAGS += $(call cc-disable-warning, unused-const-variable) | |
788 | ifdef CONFIG_FRAME_POINTER | |
789 | KBUILD_CFLAGS += -fno-omit-frame-pointer -fno-optimize-sibling-calls | |
790 | else | |
791 | # Some targets (ARM with Thumb2, for example), can't be built with frame | |
792 | # pointers. For those, we don't have FUNCTION_TRACER automatically | |
793 | # select FRAME_POINTER. However, FUNCTION_TRACER adds -pg, and this is | |
794 | # incompatible with -fomit-frame-pointer with current GCC, so we don't use | |
795 | # -fomit-frame-pointer with FUNCTION_TRACER. | |
796 | ifndef CONFIG_FUNCTION_TRACER | |
797 | KBUILD_CFLAGS += -fomit-frame-pointer | |
798 | endif | |
799 | endif | |
800 | ||
801 | # Initialize all stack variables with a 0xAA pattern. | |
802 | ifdef CONFIG_INIT_STACK_ALL_PATTERN | |
803 | KBUILD_CFLAGS += -ftrivial-auto-var-init=pattern | |
804 | endif | |
805 | ||
806 | # Initialize all stack variables with a zero value. | |
807 | ifdef CONFIG_INIT_STACK_ALL_ZERO | |
808 | # Future support for zero initialization is still being debated, see | |
809 | # https://bugs.llvm.org/show_bug.cgi?id=45497. These flags are subject to being | |
810 | # renamed or dropped. | |
811 | KBUILD_CFLAGS += -ftrivial-auto-var-init=zero | |
812 | KBUILD_CFLAGS += -enable-trivial-auto-var-init-zero-knowing-it-will-be-removed-from-clang | |
813 | endif | |
814 | ||
815 | # Workaround for GCC versions < 5.0 | |
816 | # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=61801 | |
817 | ifdef CONFIG_CC_IS_GCC | |
818 | DEBUG_CFLAGS := $(call cc-ifversion, -lt, 0500, $(call cc-option, -fno-var-tracking-assignments)) | |
819 | endif | |
820 | ||
821 | ifdef CONFIG_DEBUG_INFO | |
822 | ||
823 | ifdef CONFIG_DEBUG_INFO_SPLIT | |
824 | DEBUG_CFLAGS += -gsplit-dwarf | |
825 | else | |
826 | DEBUG_CFLAGS += -g | |
827 | endif | |
828 | ||
829 | ifneq ($(LLVM_IAS),1) | |
830 | KBUILD_AFLAGS += -Wa,-gdwarf-2 | |
831 | endif | |
832 | ||
833 | ifdef CONFIG_DEBUG_INFO_DWARF4 | |
834 | DEBUG_CFLAGS += -gdwarf-4 | |
835 | endif | |
836 | ||
837 | ifdef CONFIG_DEBUG_INFO_REDUCED | |
838 | DEBUG_CFLAGS += $(call cc-option, -femit-struct-debug-baseonly) \ | |
839 | $(call cc-option,-fno-var-tracking) | |
840 | endif | |
841 | ||
842 | ifdef CONFIG_DEBUG_INFO_COMPRESSED | |
843 | DEBUG_CFLAGS += -gz=zlib | |
844 | KBUILD_AFLAGS += -gz=zlib | |
845 | KBUILD_LDFLAGS += --compress-debug-sections=zlib | |
846 | endif | |
847 | ||
848 | endif # CONFIG_DEBUG_INFO | |
849 | ||
850 | KBUILD_CFLAGS += $(DEBUG_CFLAGS) | |
851 | export DEBUG_CFLAGS | |
852 | ||
853 | ifdef CONFIG_FUNCTION_TRACER | |
854 | ifdef CONFIG_FTRACE_MCOUNT_RECORD | |
855 | # gcc 5 supports generating the mcount tables directly | |
856 | ifeq ($(call cc-option-yn,-mrecord-mcount),y) | |
857 | CC_FLAGS_FTRACE += -mrecord-mcount | |
858 | export CC_USING_RECORD_MCOUNT := 1 | |
859 | endif | |
860 | ifdef CONFIG_HAVE_NOP_MCOUNT | |
861 | ifeq ($(call cc-option-yn, -mnop-mcount),y) | |
862 | CC_FLAGS_FTRACE += -mnop-mcount | |
863 | CC_FLAGS_USING += -DCC_USING_NOP_MCOUNT | |
864 | endif | |
865 | endif | |
866 | endif | |
867 | ifdef CONFIG_HAVE_FENTRY | |
868 | ifeq ($(call cc-option-yn, -mfentry),y) | |
869 | CC_FLAGS_FTRACE += -mfentry | |
870 | CC_FLAGS_USING += -DCC_USING_FENTRY | |
871 | endif | |
872 | endif | |
873 | export CC_FLAGS_FTRACE | |
874 | KBUILD_CFLAGS += $(CC_FLAGS_FTRACE) $(CC_FLAGS_USING) | |
875 | KBUILD_AFLAGS += $(CC_FLAGS_USING) | |
876 | ifdef CONFIG_DYNAMIC_FTRACE | |
877 | ifdef CONFIG_HAVE_C_RECORDMCOUNT | |
878 | BUILD_C_RECORDMCOUNT := y | |
879 | export BUILD_C_RECORDMCOUNT | |
880 | endif | |
881 | endif | |
882 | endif | |
883 | ||
884 | # We trigger additional mismatches with less inlining | |
885 | ifdef CONFIG_DEBUG_SECTION_MISMATCH | |
886 | KBUILD_CFLAGS += $(call cc-option, -fno-inline-functions-called-once) | |
887 | endif | |
888 | ||
889 | ifdef CONFIG_LD_DEAD_CODE_DATA_ELIMINATION | |
890 | KBUILD_CFLAGS_KERNEL += -ffunction-sections -fdata-sections | |
891 | LDFLAGS_vmlinux += --gc-sections | |
892 | endif | |
893 | ||
894 | ifdef CONFIG_SHADOW_CALL_STACK | |
895 | CC_FLAGS_SCS := -fsanitize=shadow-call-stack | |
896 | KBUILD_CFLAGS += $(CC_FLAGS_SCS) | |
897 | export CC_FLAGS_SCS | |
898 | endif | |
899 | ||
900 | ifdef CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_32B | |
901 | KBUILD_CFLAGS += -falign-functions=32 | |
902 | endif | |
903 | ||
904 | # arch Makefile may override CC so keep this after arch Makefile is included | |
905 | NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include) | |
906 | ||
907 | # warn about C99 declaration after statement | |
908 | KBUILD_CFLAGS += -Wdeclaration-after-statement | |
909 | ||
910 | # Variable Length Arrays (VLAs) should not be used anywhere in the kernel | |
911 | KBUILD_CFLAGS += -Wvla | |
912 | ||
913 | # disable pointer signed / unsigned warnings in gcc 4.0 | |
914 | KBUILD_CFLAGS += -Wno-pointer-sign | |
915 | ||
916 | # disable stringop warnings in gcc 8+ | |
917 | KBUILD_CFLAGS += $(call cc-disable-warning, stringop-truncation) | |
918 | ||
919 | # We'll want to enable this eventually, but it's not going away for 5.7 at least | |
920 | KBUILD_CFLAGS += $(call cc-disable-warning, zero-length-bounds) | |
921 | KBUILD_CFLAGS += $(call cc-disable-warning, array-bounds) | |
922 | KBUILD_CFLAGS += $(call cc-disable-warning, stringop-overflow) | |
923 | ||
924 | # Another good warning that we'll want to enable eventually | |
925 | KBUILD_CFLAGS += $(call cc-disable-warning, restrict) | |
926 | ||
927 | # Enabled with W=2, disabled by default as noisy | |
928 | KBUILD_CFLAGS += $(call cc-disable-warning, maybe-uninitialized) | |
929 | ||
930 | # disable invalid "can't wrap" optimizations for signed / pointers | |
931 | KBUILD_CFLAGS += -fno-strict-overflow | |
932 | ||
933 | # Make sure -fstack-check isn't enabled (like gentoo apparently did) | |
934 | KBUILD_CFLAGS += -fno-stack-check | |
935 | ||
936 | # conserve stack if available | |
937 | KBUILD_CFLAGS += $(call cc-option,-fconserve-stack) | |
938 | ||
939 | # Prohibit date/time macros, which would make the build non-deterministic | |
940 | KBUILD_CFLAGS += -Werror=date-time | |
941 | ||
942 | # enforce correct pointer usage | |
943 | KBUILD_CFLAGS += $(call cc-option,-Werror=incompatible-pointer-types) | |
944 | ||
945 | # Require designated initializers for all marked structures | |
946 | KBUILD_CFLAGS += $(call cc-option,-Werror=designated-init) | |
947 | ||
948 | # change __FILE__ to the relative path from the srctree | |
949 | KBUILD_CPPFLAGS += $(call cc-option,-fmacro-prefix-map=$(srctree)/=) | |
950 | ||
951 | # ensure -fcf-protection is disabled when using retpoline as it is | |
952 | # incompatible with -mindirect-branch=thunk-extern | |
953 | ifdef CONFIG_RETPOLINE | |
954 | KBUILD_CFLAGS += $(call cc-option,-fcf-protection=none) | |
955 | endif | |
956 | ||
957 | # include additional Makefiles when needed | |
958 | include-y := scripts/Makefile.extrawarn | |
959 | include-$(CONFIG_KASAN) += scripts/Makefile.kasan | |
960 | include-$(CONFIG_KCSAN) += scripts/Makefile.kcsan | |
961 | include-$(CONFIG_UBSAN) += scripts/Makefile.ubsan | |
962 | include-$(CONFIG_KCOV) += scripts/Makefile.kcov | |
963 | include-$(CONFIG_GCC_PLUGINS) += scripts/Makefile.gcc-plugins | |
964 | ||
965 | include $(addprefix $(srctree)/, $(include-y)) | |
966 | ||
967 | # scripts/Makefile.gcc-plugins is intentionally included last. | |
968 | # Do not add $(call cc-option,...) below this line. When you build the kernel | |
969 | # from the clean source tree, the GCC plugins do not exist at this point. | |
970 | ||
971 | # Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments | |
972 | KBUILD_CPPFLAGS += $(KCPPFLAGS) | |
973 | KBUILD_AFLAGS += $(KAFLAGS) | |
974 | KBUILD_CFLAGS += $(KCFLAGS) | |
975 | ||
976 | KBUILD_LDFLAGS_MODULE += --build-id=sha1 | |
977 | LDFLAGS_vmlinux += --build-id=sha1 | |
978 | ||
979 | ifeq ($(CONFIG_STRIP_ASM_SYMS),y) | |
980 | LDFLAGS_vmlinux += $(call ld-option, -X,) | |
981 | endif | |
982 | ||
983 | ifeq ($(CONFIG_RELR),y) | |
984 | LDFLAGS_vmlinux += --pack-dyn-relocs=relr | |
985 | endif | |
986 | ||
987 | # We never want expected sections to be placed heuristically by the | |
988 | # linker. All sections should be explicitly named in the linker script. | |
989 | ifdef CONFIG_LD_ORPHAN_WARN | |
990 | LDFLAGS_vmlinux += --orphan-handling=warn | |
991 | endif | |
992 | ||
993 | # Align the bit size of userspace programs with the kernel | |
994 | KBUILD_USERCFLAGS += $(filter -m32 -m64 --target=%, $(KBUILD_CFLAGS)) | |
995 | KBUILD_USERLDFLAGS += $(filter -m32 -m64 --target=%, $(KBUILD_CFLAGS)) | |
996 | ||
997 | # make the checker run with the right architecture | |
998 | CHECKFLAGS += --arch=$(ARCH) | |
999 | ||
1000 | # insure the checker run with the right endianness | |
1001 | CHECKFLAGS += $(if $(CONFIG_CPU_BIG_ENDIAN),-mbig-endian,-mlittle-endian) | |
1002 | ||
1003 | # the checker needs the correct machine size | |
1004 | CHECKFLAGS += $(if $(CONFIG_64BIT),-m64,-m32) | |
1005 | ||
1006 | # Default kernel image to build when no specific target is given. | |
1007 | # KBUILD_IMAGE may be overruled on the command line or | |
1008 | # set in the environment | |
1009 | # Also any assignments in arch/$(ARCH)/Makefile take precedence over | |
1010 | # this default value | |
1011 | export KBUILD_IMAGE ?= vmlinux | |
1012 | ||
1013 | # | |
1014 | # INSTALL_PATH specifies where to place the updated kernel and system map | |
1015 | # images. Default is /boot, but you can set it to other values | |
1016 | export INSTALL_PATH ?= /boot | |
1017 | ||
1018 | # | |
1019 | # INSTALL_DTBS_PATH specifies a prefix for relocations required by build roots. | |
1020 | # Like INSTALL_MOD_PATH, it isn't defined in the Makefile, but can be passed as | |
1021 | # an argument if needed. Otherwise it defaults to the kernel install path | |
1022 | # | |
1023 | export INSTALL_DTBS_PATH ?= $(INSTALL_PATH)/dtbs/$(KERNELRELEASE) | |
1024 | ||
1025 | # | |
1026 | # INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory | |
1027 | # relocations required by build roots. This is not defined in the | |
1028 | # makefile but the argument can be passed to make if needed. | |
1029 | # | |
1030 | ||
1031 | MODLIB = $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE) | |
1032 | export MODLIB | |
1033 | ||
1034 | # | |
1035 | # INSTALL_MOD_STRIP, if defined, will cause modules to be | |
1036 | # stripped after they are installed. If INSTALL_MOD_STRIP is '1', then | |
1037 | # the default option --strip-debug will be used. Otherwise, | |
1038 | # INSTALL_MOD_STRIP value will be used as the options to the strip command. | |
1039 | ||
1040 | ifdef INSTALL_MOD_STRIP | |
1041 | ifeq ($(INSTALL_MOD_STRIP),1) | |
1042 | mod_strip_cmd = $(STRIP) --strip-debug | |
1043 | else | |
1044 | mod_strip_cmd = $(STRIP) $(INSTALL_MOD_STRIP) | |
1045 | endif # INSTALL_MOD_STRIP=1 | |
1046 | else | |
1047 | mod_strip_cmd = true | |
1048 | endif # INSTALL_MOD_STRIP | |
1049 | export mod_strip_cmd | |
1050 | ||
1051 | # CONFIG_MODULE_COMPRESS, if defined, will cause module to be compressed | |
1052 | # after they are installed in agreement with CONFIG_MODULE_COMPRESS_GZIP | |
1053 | # or CONFIG_MODULE_COMPRESS_XZ. | |
1054 | ||
1055 | mod_compress_cmd = true | |
1056 | ifdef CONFIG_MODULE_COMPRESS | |
1057 | ifdef CONFIG_MODULE_COMPRESS_GZIP | |
1058 | mod_compress_cmd = $(KGZIP) -n -f | |
1059 | endif # CONFIG_MODULE_COMPRESS_GZIP | |
1060 | ifdef CONFIG_MODULE_COMPRESS_XZ | |
1061 | mod_compress_cmd = $(XZ) -f | |
1062 | endif # CONFIG_MODULE_COMPRESS_XZ | |
1063 | endif # CONFIG_MODULE_COMPRESS | |
1064 | export mod_compress_cmd | |
1065 | ||
1066 | ifdef CONFIG_MODULE_SIG_ALL | |
1067 | $(eval $(call config_filename,MODULE_SIG_KEY)) | |
1068 | ||
1069 | mod_sign_cmd = scripts/sign-file $(CONFIG_MODULE_SIG_HASH) $(MODULE_SIG_KEY_SRCPREFIX)$(CONFIG_MODULE_SIG_KEY) certs/signing_key.x509 | |
1070 | else | |
1071 | mod_sign_cmd = true | |
1072 | endif | |
1073 | export mod_sign_cmd | |
1074 | ||
1075 | HOST_LIBELF_LIBS = $(shell pkg-config libelf --libs 2>/dev/null || echo -lelf) | |
1076 | ||
1077 | has_libelf = $(call try-run,\ | |
1078 | echo "int main() {}" | $(HOSTCC) -xc -o /dev/null $(HOST_LIBELF_LIBS) -,1,0) | |
1079 | ||
1080 | ifdef CONFIG_STACK_VALIDATION | |
1081 | ifeq ($(has_libelf),1) | |
1082 | objtool_target := tools/objtool FORCE | |
1083 | else | |
1084 | SKIP_STACK_VALIDATION := 1 | |
1085 | export SKIP_STACK_VALIDATION | |
1086 | endif | |
1087 | endif | |
1088 | ||
1089 | ifdef CONFIG_BPF | |
1090 | ifdef CONFIG_DEBUG_INFO_BTF | |
1091 | ifeq ($(has_libelf),1) | |
1092 | resolve_btfids_target := tools/bpf/resolve_btfids FORCE | |
1093 | else | |
1094 | ERROR_RESOLVE_BTFIDS := 1 | |
1095 | endif | |
1096 | endif # CONFIG_DEBUG_INFO_BTF | |
1097 | endif # CONFIG_BPF | |
1098 | ||
1099 | PHONY += prepare0 | |
1100 | ||
1101 | export MODORDER := $(extmod-prefix)modules.order | |
1102 | export MODULES_NSDEPS := $(extmod-prefix)modules.nsdeps | |
1103 | ||
1104 | ifeq ($(KBUILD_EXTMOD),) | |
1105 | core-y += kernel/ certs/ mm/ fs/ ipc/ security/ crypto/ block/ | |
1106 | ||
1107 | vmlinux-dirs := $(patsubst %/,%,$(filter %/, \ | |
1108 | $(core-y) $(core-m) $(drivers-y) $(drivers-m) \ | |
1109 | $(libs-y) $(libs-m))) | |
1110 | ||
1111 | vmlinux-alldirs := $(sort $(vmlinux-dirs) Documentation \ | |
1112 | $(patsubst %/,%,$(filter %/, $(core-) \ | |
1113 | $(drivers-) $(libs-)))) | |
1114 | ||
1115 | subdir-modorder := $(addsuffix modules.order,$(filter %/, \ | |
1116 | $(core-y) $(core-m) $(libs-y) $(libs-m) \ | |
1117 | $(drivers-y) $(drivers-m))) | |
1118 | ||
1119 | build-dirs := $(vmlinux-dirs) | |
1120 | clean-dirs := $(vmlinux-alldirs) | |
1121 | ||
1122 | # Externally visible symbols (used by link-vmlinux.sh) | |
1123 | KBUILD_VMLINUX_OBJS := $(head-y) $(patsubst %/,%/built-in.a, $(core-y)) | |
1124 | KBUILD_VMLINUX_OBJS += $(addsuffix built-in.a, $(filter %/, $(libs-y))) | |
1125 | ifdef CONFIG_MODULES | |
1126 | KBUILD_VMLINUX_OBJS += $(patsubst %/, %/lib.a, $(filter %/, $(libs-y))) | |
1127 | KBUILD_VMLINUX_LIBS := $(filter-out %/, $(libs-y)) | |
1128 | else | |
1129 | KBUILD_VMLINUX_LIBS := $(patsubst %/,%/lib.a, $(libs-y)) | |
1130 | endif | |
1131 | KBUILD_VMLINUX_OBJS += $(patsubst %/,%/built-in.a, $(drivers-y)) | |
1132 | ||
1133 | export KBUILD_VMLINUX_OBJS KBUILD_VMLINUX_LIBS | |
1134 | export KBUILD_LDS := arch/$(SRCARCH)/kernel/vmlinux.lds | |
1135 | # used by scripts/Makefile.package | |
1136 | export KBUILD_ALLDIRS := $(sort $(filter-out arch/%,$(vmlinux-alldirs)) LICENSES arch include scripts tools) | |
1137 | ||
1138 | vmlinux-deps := $(KBUILD_LDS) $(KBUILD_VMLINUX_OBJS) $(KBUILD_VMLINUX_LIBS) | |
1139 | ||
1140 | # Recurse until adjust_autoksyms.sh is satisfied | |
1141 | PHONY += autoksyms_recursive | |
1142 | ifdef CONFIG_TRIM_UNUSED_KSYMS | |
1143 | # For the kernel to actually contain only the needed exported symbols, | |
1144 | # we have to build modules as well to determine what those symbols are. | |
1145 | # (this can be evaluated only once include/config/auto.conf has been included) | |
1146 | KBUILD_MODULES := 1 | |
1147 | ||
1148 | autoksyms_recursive: descend modules.order | |
1149 | $(Q)$(CONFIG_SHELL) $(srctree)/scripts/adjust_autoksyms.sh \ | |
1150 | "$(MAKE) -f $(srctree)/Makefile vmlinux" | |
1151 | endif | |
1152 | ||
1153 | autoksyms_h := $(if $(CONFIG_TRIM_UNUSED_KSYMS), include/generated/autoksyms.h) | |
1154 | ||
1155 | quiet_cmd_autoksyms_h = GEN $@ | |
1156 | cmd_autoksyms_h = mkdir -p $(dir $@); \ | |
1157 | $(CONFIG_SHELL) $(srctree)/scripts/gen_autoksyms.sh $@ | |
1158 | ||
1159 | $(autoksyms_h): | |
1160 | $(call cmd,autoksyms_h) | |
1161 | ||
1162 | ARCH_POSTLINK := $(wildcard $(srctree)/arch/$(SRCARCH)/Makefile.postlink) | |
1163 | ||
1164 | # Final link of vmlinux with optional arch pass after final link | |
1165 | cmd_link-vmlinux = \ | |
1166 | $(CONFIG_SHELL) $< "$(LD)" "$(KBUILD_LDFLAGS)" "$(LDFLAGS_vmlinux)"; \ | |
1167 | $(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) $@, true) | |
1168 | ||
1169 | vmlinux: scripts/link-vmlinux.sh autoksyms_recursive $(vmlinux-deps) FORCE | |
1170 | +$(call if_changed,link-vmlinux) | |
1171 | ||
1172 | targets := vmlinux | |
1173 | ||
1174 | # The actual objects are generated when descending, | |
1175 | # make sure no implicit rule kicks in | |
1176 | $(sort $(vmlinux-deps) $(subdir-modorder)): descend ; | |
1177 | ||
1178 | filechk_kernel.release = \ | |
1179 | echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))" | |
1180 | ||
1181 | # Store (new) KERNELRELEASE string in include/config/kernel.release | |
1182 | include/config/kernel.release: FORCE | |
1183 | $(call filechk,kernel.release) | |
1184 | ||
1185 | # Additional helpers built in scripts/ | |
1186 | # Carefully list dependencies so we do not try to build scripts twice | |
1187 | # in parallel | |
1188 | PHONY += scripts | |
1189 | scripts: scripts_basic scripts_dtc | |
1190 | $(Q)$(MAKE) $(build)=$(@) | |
1191 | ||
1192 | # Things we need to do before we recursively start building the kernel | |
1193 | # or the modules are listed in "prepare". | |
1194 | # A multi level approach is used. prepareN is processed before prepareN-1. | |
1195 | # archprepare is used in arch Makefiles and when processed asm symlink, | |
1196 | # version.h and scripts_basic is processed / created. | |
1197 | ||
1198 | PHONY += prepare archprepare | |
1199 | ||
1200 | archprepare: outputmakefile archheaders archscripts scripts include/config/kernel.release \ | |
1201 | asm-generic $(version_h) $(autoksyms_h) include/generated/utsrelease.h \ | |
1202 | include/generated/autoconf.h | |
1203 | ||
1204 | prepare0: archprepare | |
1205 | $(Q)$(MAKE) $(build)=scripts/mod | |
1206 | $(Q)$(MAKE) $(build)=. | |
1207 | ||
1208 | # All the preparing.. | |
1209 | prepare: prepare0 prepare-objtool prepare-resolve_btfids | |
1210 | ||
1211 | # Support for using generic headers in asm-generic | |
1212 | asm-generic := -f $(srctree)/scripts/Makefile.asm-generic obj | |
1213 | ||
1214 | PHONY += asm-generic uapi-asm-generic | |
1215 | asm-generic: uapi-asm-generic | |
1216 | $(Q)$(MAKE) $(asm-generic)=arch/$(SRCARCH)/include/generated/asm \ | |
1217 | generic=include/asm-generic | |
1218 | uapi-asm-generic: | |
1219 | $(Q)$(MAKE) $(asm-generic)=arch/$(SRCARCH)/include/generated/uapi/asm \ | |
1220 | generic=include/uapi/asm-generic | |
1221 | ||
1222 | PHONY += prepare-objtool prepare-resolve_btfids | |
1223 | prepare-objtool: $(objtool_target) | |
1224 | ifeq ($(SKIP_STACK_VALIDATION),1) | |
1225 | ifdef CONFIG_UNWINDER_ORC | |
1226 | @echo "error: Cannot generate ORC metadata for CONFIG_UNWINDER_ORC=y, please install libelf-dev, libelf-devel or elfutils-libelf-devel" >&2 | |
1227 | @false | |
1228 | else | |
1229 | @echo "warning: Cannot use CONFIG_STACK_VALIDATION=y, please install libelf-dev, libelf-devel or elfutils-libelf-devel" >&2 | |
1230 | endif | |
1231 | endif | |
1232 | ||
1233 | prepare-resolve_btfids: $(resolve_btfids_target) | |
1234 | ifeq ($(ERROR_RESOLVE_BTFIDS),1) | |
1235 | @echo "error: Cannot resolve BTF IDs for CONFIG_DEBUG_INFO_BTF, please install libelf-dev, libelf-devel or elfutils-libelf-devel" >&2 | |
1236 | @false | |
1237 | endif | |
1238 | # Generate some files | |
1239 | # --------------------------------------------------------------------------- | |
1240 | ||
1241 | # KERNELRELEASE can change from a few different places, meaning version.h | |
1242 | # needs to be updated, so this check is forced on all builds | |
1243 | ||
1244 | uts_len := 64 | |
1245 | define filechk_utsrelease.h | |
1246 | if [ `echo -n "$(KERNELRELEASE)" | wc -c ` -gt $(uts_len) ]; then \ | |
1247 | echo '"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2; \ | |
1248 | exit 1; \ | |
1249 | fi; \ | |
1250 | echo \#define UTS_RELEASE \"$(KERNELRELEASE)\" | |
1251 | endef | |
1252 | ||
1253 | define filechk_version.h | |
1254 | echo \#define LINUX_VERSION_CODE $(shell \ | |
1255 | expr $(VERSION) \* 65536 + 0$(PATCHLEVEL) \* 256 + 0$(SUBLEVEL)); \ | |
1256 | echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))' | |
1257 | endef | |
1258 | ||
1259 | $(version_h): FORCE | |
1260 | $(call filechk,version.h) | |
1261 | $(Q)rm -f $(old_version_h) | |
1262 | ||
1263 | include/generated/utsrelease.h: include/config/kernel.release FORCE | |
1264 | $(call filechk,utsrelease.h) | |
1265 | ||
1266 | PHONY += headerdep | |
1267 | headerdep: | |
1268 | $(Q)find $(srctree)/include/ -name '*.h' | xargs --max-args 1 \ | |
1269 | $(srctree)/scripts/headerdep.pl -I$(srctree)/include | |
1270 | ||
1271 | # --------------------------------------------------------------------------- | |
1272 | # Kernel headers | |
1273 | ||
1274 | #Default location for installed headers | |
1275 | export INSTALL_HDR_PATH = $(objtree)/usr | |
1276 | ||
1277 | quiet_cmd_headers_install = INSTALL $(INSTALL_HDR_PATH)/include | |
1278 | cmd_headers_install = \ | |
1279 | mkdir -p $(INSTALL_HDR_PATH); \ | |
1280 | rsync -mrl --include='*/' --include='*\.h' --exclude='*' \ | |
1281 | usr/include $(INSTALL_HDR_PATH) | |
1282 | ||
1283 | PHONY += headers_install | |
1284 | headers_install: headers | |
1285 | $(call cmd,headers_install) | |
1286 | ||
1287 | PHONY += archheaders archscripts | |
1288 | ||
1289 | hdr-inst := -f $(srctree)/scripts/Makefile.headersinst obj | |
1290 | ||
1291 | PHONY += headers | |
1292 | headers: $(version_h) scripts_unifdef uapi-asm-generic archheaders archscripts | |
1293 | $(if $(wildcard $(srctree)/arch/$(SRCARCH)/include/uapi/asm/Kbuild),, \ | |
1294 | $(error Headers not exportable for the $(SRCARCH) architecture)) | |
1295 | $(Q)$(MAKE) $(hdr-inst)=include/uapi | |
1296 | $(Q)$(MAKE) $(hdr-inst)=arch/$(SRCARCH)/include/uapi | |
1297 | ||
1298 | # Deprecated. It is no-op now. | |
1299 | PHONY += headers_check | |
1300 | headers_check: | |
1301 | @: | |
1302 | ||
1303 | ifdef CONFIG_HEADERS_INSTALL | |
1304 | prepare: headers | |
1305 | endif | |
1306 | ||
1307 | PHONY += scripts_unifdef | |
1308 | scripts_unifdef: scripts_basic | |
1309 | $(Q)$(MAKE) $(build)=scripts scripts/unifdef | |
1310 | ||
1311 | # --------------------------------------------------------------------------- | |
1312 | # Kernel selftest | |
1313 | ||
1314 | PHONY += kselftest | |
1315 | kselftest: | |
1316 | $(Q)$(MAKE) -C $(srctree)/tools/testing/selftests run_tests | |
1317 | ||
1318 | kselftest-%: FORCE | |
1319 | $(Q)$(MAKE) -C $(srctree)/tools/testing/selftests $* | |
1320 | ||
1321 | PHONY += kselftest-merge | |
1322 | kselftest-merge: | |
1323 | $(if $(wildcard $(objtree)/.config),, $(error No .config exists, config your kernel first!)) | |
1324 | $(Q)find $(srctree)/tools/testing/selftests -name config | \ | |
1325 | xargs $(srctree)/scripts/kconfig/merge_config.sh -m $(objtree)/.config | |
1326 | $(Q)$(MAKE) -f $(srctree)/Makefile olddefconfig | |
1327 | ||
1328 | # --------------------------------------------------------------------------- | |
1329 | # Devicetree files | |
1330 | ||
1331 | ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/boot/dts/),) | |
1332 | dtstree := arch/$(SRCARCH)/boot/dts | |
1333 | endif | |
1334 | ||
1335 | ifneq ($(dtstree),) | |
1336 | ||
1337 | %.dtb: include/config/kernel.release scripts_dtc | |
1338 | $(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@ | |
1339 | ||
1340 | PHONY += dtbs dtbs_install dtbs_check | |
1341 | dtbs: include/config/kernel.release scripts_dtc | |
1342 | $(Q)$(MAKE) $(build)=$(dtstree) | |
1343 | ||
1344 | ifneq ($(filter dtbs_check, $(MAKECMDGOALS)),) | |
1345 | export CHECK_DTBS=y | |
1346 | dtbs: dt_binding_check | |
1347 | endif | |
1348 | ||
1349 | dtbs_check: dtbs | |
1350 | ||
1351 | dtbs_install: | |
1352 | $(Q)$(MAKE) $(dtbinst)=$(dtstree) dst=$(INSTALL_DTBS_PATH) | |
1353 | ||
1354 | ifdef CONFIG_OF_EARLY_FLATTREE | |
1355 | all: dtbs | |
1356 | endif | |
1357 | ||
1358 | endif | |
1359 | ||
1360 | PHONY += scripts_dtc | |
1361 | scripts_dtc: scripts_basic | |
1362 | $(Q)$(MAKE) $(build)=scripts/dtc | |
1363 | ||
1364 | ifneq ($(filter dt_binding_check, $(MAKECMDGOALS)),) | |
1365 | export CHECK_DT_BINDING=y | |
1366 | endif | |
1367 | ||
1368 | PHONY += dt_binding_check | |
1369 | dt_binding_check: scripts_dtc | |
1370 | $(Q)$(MAKE) $(build)=Documentation/devicetree/bindings | |
1371 | ||
1372 | # --------------------------------------------------------------------------- | |
1373 | # Modules | |
1374 | ||
1375 | ifdef CONFIG_MODULES | |
1376 | ||
1377 | # By default, build modules as well | |
1378 | ||
1379 | all: modules | |
1380 | ||
1381 | # When we're building modules with modversions, we need to consider | |
1382 | # the built-in objects during the descend as well, in order to | |
1383 | # make sure the checksums are up to date before we record them. | |
1384 | ifdef CONFIG_MODVERSIONS | |
1385 | KBUILD_BUILTIN := 1 | |
1386 | endif | |
1387 | ||
1388 | # Build modules | |
1389 | # | |
1390 | # A module can be listed more than once in obj-m resulting in | |
1391 | # duplicate lines in modules.order files. Those are removed | |
1392 | # using awk while concatenating to the final file. | |
1393 | ||
1394 | PHONY += modules | |
1395 | modules: $(if $(KBUILD_BUILTIN),vmlinux) modules_check modules_prepare | |
1396 | $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost | |
1397 | ||
1398 | PHONY += modules_check | |
1399 | modules_check: modules.order | |
1400 | $(Q)$(CONFIG_SHELL) $(srctree)/scripts/modules-check.sh $< | |
1401 | ||
1402 | cmd_modules_order = $(AWK) '!x[$$0]++' $(real-prereqs) > $@ | |
1403 | ||
1404 | modules.order: $(subdir-modorder) FORCE | |
1405 | $(call if_changed,modules_order) | |
1406 | ||
1407 | targets += modules.order | |
1408 | ||
1409 | # Target to prepare building external modules | |
1410 | PHONY += modules_prepare | |
1411 | modules_prepare: prepare | |
1412 | $(Q)$(MAKE) $(build)=scripts scripts/module.lds | |
1413 | ||
1414 | # Target to install modules | |
1415 | PHONY += modules_install | |
1416 | modules_install: _modinst_ _modinst_post | |
1417 | ||
1418 | PHONY += _modinst_ | |
1419 | _modinst_: | |
1420 | @rm -rf $(MODLIB)/kernel | |
1421 | @rm -f $(MODLIB)/source | |
1422 | @mkdir -p $(MODLIB)/kernel | |
1423 | @ln -s $(abspath $(srctree)) $(MODLIB)/source | |
1424 | @if [ ! $(objtree) -ef $(MODLIB)/build ]; then \ | |
1425 | rm -f $(MODLIB)/build ; \ | |
1426 | ln -s $(CURDIR) $(MODLIB)/build ; \ | |
1427 | fi | |
1428 | @sed 's:^:kernel/:' modules.order > $(MODLIB)/modules.order | |
1429 | @cp -f modules.builtin $(MODLIB)/ | |
1430 | @cp -f $(objtree)/modules.builtin.modinfo $(MODLIB)/ | |
1431 | $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst | |
1432 | ||
1433 | # This depmod is only for convenience to give the initial | |
1434 | # boot a modules.dep even before / is mounted read-write. However the | |
1435 | # boot script depmod is the master version. | |
1436 | PHONY += _modinst_post | |
1437 | _modinst_post: _modinst_ | |
1438 | $(call cmd,depmod) | |
1439 | ||
1440 | ifeq ($(CONFIG_MODULE_SIG), y) | |
1441 | PHONY += modules_sign | |
1442 | modules_sign: | |
1443 | $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modsign | |
1444 | endif | |
1445 | ||
1446 | else # CONFIG_MODULES | |
1447 | ||
1448 | # Modules not configured | |
1449 | # --------------------------------------------------------------------------- | |
1450 | ||
1451 | PHONY += modules modules_install | |
1452 | modules modules_install: | |
1453 | @echo >&2 | |
1454 | @echo >&2 "The present kernel configuration has modules disabled." | |
1455 | @echo >&2 "Type 'make config' and enable loadable module support." | |
1456 | @echo >&2 "Then build a kernel with module support enabled." | |
1457 | @echo >&2 | |
1458 | @exit 1 | |
1459 | ||
1460 | endif # CONFIG_MODULES | |
1461 | ||
1462 | ### | |
1463 | # Cleaning is done on three levels. | |
1464 | # make clean Delete most generated files | |
1465 | # Leave enough to build external modules | |
1466 | # make mrproper Delete the current configuration, and all generated files | |
1467 | # make distclean Remove editor backup files, patch leftover files and the like | |
1468 | ||
1469 | # Directories & files removed with 'make clean' | |
1470 | CLEAN_FILES += include/ksym vmlinux.symvers \ | |
1471 | modules.builtin modules.builtin.modinfo modules.nsdeps \ | |
1472 | compile_commands.json | |
1473 | ||
1474 | # Directories & files removed with 'make mrproper' | |
1475 | MRPROPER_FILES += include/config include/generated \ | |
1476 | arch/$(SRCARCH)/include/generated .tmp_objdiff \ | |
1477 | debian snap tar-install \ | |
1478 | .config .config.old .version \ | |
1479 | Module.symvers \ | |
1480 | signing_key.pem signing_key.priv signing_key.x509 \ | |
1481 | x509.genkey extra_certificates signing_key.x509.keyid \ | |
1482 | signing_key.x509.signer vmlinux-gdb.py \ | |
1483 | *.spec | |
1484 | ||
1485 | # Directories & files removed with 'make distclean' | |
1486 | DISTCLEAN_FILES += tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS | |
1487 | ||
1488 | # clean - Delete most, but leave enough to build external modules | |
1489 | # | |
1490 | clean: rm-files := $(CLEAN_FILES) | |
1491 | ||
1492 | PHONY += archclean vmlinuxclean | |
1493 | ||
1494 | vmlinuxclean: | |
1495 | $(Q)$(CONFIG_SHELL) $(srctree)/scripts/link-vmlinux.sh clean | |
1496 | $(Q)$(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) clean) | |
1497 | ||
1498 | clean: archclean vmlinuxclean | |
1499 | ||
1500 | # mrproper - Delete all generated files, including .config | |
1501 | # | |
1502 | mrproper: rm-files := $(wildcard $(MRPROPER_FILES)) | |
1503 | mrproper-dirs := $(addprefix _mrproper_,scripts) | |
1504 | ||
1505 | PHONY += $(mrproper-dirs) mrproper | |
1506 | $(mrproper-dirs): | |
1507 | $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@) | |
1508 | ||
1509 | mrproper: clean $(mrproper-dirs) | |
1510 | $(call cmd,rmfiles) | |
1511 | ||
1512 | # distclean | |
1513 | # | |
1514 | distclean: rm-files := $(wildcard $(DISTCLEAN_FILES)) | |
1515 | ||
1516 | PHONY += distclean | |
1517 | ||
1518 | distclean: mrproper | |
1519 | $(call cmd,rmfiles) | |
1520 | @find $(srctree) $(RCS_FIND_IGNORE) \ | |
1521 | \( -name '*.orig' -o -name '*.rej' -o -name '*~' \ | |
1522 | -o -name '*.bak' -o -name '#*#' -o -name '*%' \ | |
1523 | -o -name 'core' \) \ | |
1524 | -type f -print | xargs rm -f | |
1525 | ||
1526 | ||
1527 | # Packaging of the kernel to various formats | |
1528 | # --------------------------------------------------------------------------- | |
1529 | ||
1530 | %src-pkg: FORCE | |
1531 | $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.package $@ | |
1532 | %pkg: include/config/kernel.release FORCE | |
1533 | $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.package $@ | |
1534 | ||
1535 | # Brief documentation of the typical targets used | |
1536 | # --------------------------------------------------------------------------- | |
1537 | ||
1538 | boards := $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*_defconfig) | |
1539 | boards := $(sort $(notdir $(boards))) | |
1540 | board-dirs := $(dir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*/*_defconfig)) | |
1541 | board-dirs := $(sort $(notdir $(board-dirs:/=))) | |
1542 | ||
1543 | PHONY += help | |
1544 | help: | |
1545 | @echo 'Cleaning targets:' | |
1546 | @echo ' clean - Remove most generated files but keep the config and' | |
1547 | @echo ' enough build support to build external modules' | |
1548 | @echo ' mrproper - Remove all generated files + config + various backup files' | |
1549 | @echo ' distclean - mrproper + remove editor backup and patch files' | |
1550 | @echo '' | |
1551 | @echo 'Configuration targets:' | |
1552 | @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help | |
1553 | @echo '' | |
1554 | @echo 'Other generic targets:' | |
1555 | @echo ' all - Build all targets marked with [*]' | |
1556 | @echo '* vmlinux - Build the bare kernel' | |
1557 | @echo '* modules - Build all modules' | |
1558 | @echo ' modules_install - Install all modules to INSTALL_MOD_PATH (default: /)' | |
1559 | @echo ' dir/ - Build all files in dir and below' | |
1560 | @echo ' dir/file.[ois] - Build specified target only' | |
1561 | @echo ' dir/file.ll - Build the LLVM assembly file' | |
1562 | @echo ' (requires compiler support for LLVM assembly generation)' | |
1563 | @echo ' dir/file.lst - Build specified mixed source/assembly target only' | |
1564 | @echo ' (requires a recent binutils and recent build (System.map))' | |
1565 | @echo ' dir/file.ko - Build module including final link' | |
1566 | @echo ' modules_prepare - Set up for building external modules' | |
1567 | @echo ' tags/TAGS - Generate tags file for editors' | |
1568 | @echo ' cscope - Generate cscope index' | |
1569 | @echo ' gtags - Generate GNU GLOBAL index' | |
1570 | @echo ' kernelrelease - Output the release version string (use with make -s)' | |
1571 | @echo ' kernelversion - Output the version stored in Makefile (use with make -s)' | |
1572 | @echo ' image_name - Output the image name (use with make -s)' | |
1573 | @echo ' headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH'; \ | |
1574 | echo ' (default: $(INSTALL_HDR_PATH))'; \ | |
1575 | echo '' | |
1576 | @echo 'Static analysers:' | |
1577 | @echo ' checkstack - Generate a list of stack hogs' | |
1578 | @echo ' versioncheck - Sanity check on version.h usage' | |
1579 | @echo ' includecheck - Check for duplicate included header files' | |
1580 | @echo ' export_report - List the usages of all exported symbols' | |
1581 | @echo ' headerdep - Detect inclusion cycles in headers' | |
1582 | @echo ' coccicheck - Check with Coccinelle' | |
1583 | @echo ' clang-analyzer - Check with clang static analyzer' | |
1584 | @echo ' clang-tidy - Check with clang-tidy' | |
1585 | @echo '' | |
1586 | @echo 'Tools:' | |
1587 | @echo ' nsdeps - Generate missing symbol namespace dependencies' | |
1588 | @echo '' | |
1589 | @echo 'Kernel selftest:' | |
1590 | @echo ' kselftest - Build and run kernel selftest' | |
1591 | @echo ' Build, install, and boot kernel before' | |
1592 | @echo ' running kselftest on it' | |
1593 | @echo ' Run as root for full coverage' | |
1594 | @echo ' kselftest-all - Build kernel selftest' | |
1595 | @echo ' kselftest-install - Build and install kernel selftest' | |
1596 | @echo ' kselftest-clean - Remove all generated kselftest files' | |
1597 | @echo ' kselftest-merge - Merge all the config dependencies of' | |
1598 | @echo ' kselftest to existing .config.' | |
1599 | @echo '' | |
1600 | @$(if $(dtstree), \ | |
1601 | echo 'Devicetree:'; \ | |
1602 | echo '* dtbs - Build device tree blobs for enabled boards'; \ | |
1603 | echo ' dtbs_install - Install dtbs to $(INSTALL_DTBS_PATH)'; \ | |
1604 | echo ' dt_binding_check - Validate device tree binding documents'; \ | |
1605 | echo ' dtbs_check - Validate device tree source files';\ | |
1606 | echo '') | |
1607 | ||
1608 | @echo 'Userspace tools targets:' | |
1609 | @echo ' use "make tools/help"' | |
1610 | @echo ' or "cd tools; make help"' | |
1611 | @echo '' | |
1612 | @echo 'Kernel packaging:' | |
1613 | @$(MAKE) -f $(srctree)/scripts/Makefile.package help | |
1614 | @echo '' | |
1615 | @echo 'Documentation targets:' | |
1616 | @$(MAKE) -f $(srctree)/Documentation/Makefile dochelp | |
1617 | @echo '' | |
1618 | @echo 'Architecture specific targets ($(SRCARCH)):' | |
1619 | @$(if $(archhelp),$(archhelp),\ | |
1620 | echo ' No architecture specific help defined for $(SRCARCH)') | |
1621 | @echo '' | |
1622 | @$(if $(boards), \ | |
1623 | $(foreach b, $(boards), \ | |
1624 | printf " %-27s - Build for %s\\n" $(b) $(subst _defconfig,,$(b));) \ | |
1625 | echo '') | |
1626 | @$(if $(board-dirs), \ | |
1627 | $(foreach b, $(board-dirs), \ | |
1628 | printf " %-16s - Show %s-specific targets\\n" help-$(b) $(b);) \ | |
1629 | printf " %-16s - Show all of the above\\n" help-boards; \ | |
1630 | echo '') | |
1631 | ||
1632 | @echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build' | |
1633 | @echo ' make V=2 [targets] 2 => give reason for rebuild of target' | |
1634 | @echo ' make O=dir [targets] Locate all output files in "dir", including .config' | |
1635 | @echo ' make C=1 [targets] Check re-compiled c source with $$CHECK' | |
1636 | @echo ' (sparse by default)' | |
1637 | @echo ' make C=2 [targets] Force check of all c source with $$CHECK' | |
1638 | @echo ' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections' | |
1639 | @echo ' make W=n [targets] Enable extra build checks, n=1,2,3 where' | |
1640 | @echo ' 1: warnings which may be relevant and do not occur too often' | |
1641 | @echo ' 2: warnings which occur quite often but may still be relevant' | |
1642 | @echo ' 3: more obscure warnings, can most likely be ignored' | |
1643 | @echo ' Multiple levels can be combined with W=12 or W=123' | |
1644 | @echo '' | |
1645 | @echo 'Execute "make" or "make all" to build all targets marked with [*] ' | |
1646 | @echo 'For further info see the ./README file' | |
1647 | ||
1648 | ||
1649 | help-board-dirs := $(addprefix help-,$(board-dirs)) | |
1650 | ||
1651 | help-boards: $(help-board-dirs) | |
1652 | ||
1653 | boards-per-dir = $(sort $(notdir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/$*/*_defconfig))) | |
1654 | ||
1655 | $(help-board-dirs): help-%: | |
1656 | @echo 'Architecture specific targets ($(SRCARCH) $*):' | |
1657 | @$(if $(boards-per-dir), \ | |
1658 | $(foreach b, $(boards-per-dir), \ | |
1659 | printf " %-24s - Build for %s\\n" $*/$(b) $(subst _defconfig,,$(b));) \ | |
1660 | echo '') | |
1661 | ||
1662 | ||
1663 | # Documentation targets | |
1664 | # --------------------------------------------------------------------------- | |
1665 | DOC_TARGETS := xmldocs latexdocs pdfdocs htmldocs epubdocs cleandocs \ | |
1666 | linkcheckdocs dochelp refcheckdocs | |
1667 | PHONY += $(DOC_TARGETS) | |
1668 | $(DOC_TARGETS): | |
1669 | $(Q)$(MAKE) $(build)=Documentation $@ | |
1670 | ||
1671 | # Misc | |
1672 | # --------------------------------------------------------------------------- | |
1673 | ||
1674 | PHONY += scripts_gdb | |
1675 | scripts_gdb: prepare0 | |
1676 | $(Q)$(MAKE) $(build)=scripts/gdb | |
1677 | $(Q)ln -fsn $(abspath $(srctree)/scripts/gdb/vmlinux-gdb.py) | |
1678 | ||
1679 | ifdef CONFIG_GDB_SCRIPTS | |
1680 | all: scripts_gdb | |
1681 | endif | |
1682 | ||
1683 | else # KBUILD_EXTMOD | |
1684 | ||
1685 | ### | |
1686 | # External module support. | |
1687 | # When building external modules the kernel used as basis is considered | |
1688 | # read-only, and no consistency checks are made and the make | |
1689 | # system is not used on the basis kernel. If updates are required | |
1690 | # in the basis kernel ordinary make commands (without M=...) must | |
1691 | # be used. | |
1692 | # | |
1693 | # The following are the only valid targets when building external | |
1694 | # modules. | |
1695 | # make M=dir clean Delete all automatically generated files | |
1696 | # make M=dir modules Make all modules in specified dir | |
1697 | # make M=dir Same as 'make M=dir modules' | |
1698 | # make M=dir modules_install | |
1699 | # Install the modules built in the module directory | |
1700 | # Assumes install directory is already created | |
1701 | ||
1702 | # We are always building only modules. | |
1703 | KBUILD_BUILTIN := | |
1704 | KBUILD_MODULES := 1 | |
1705 | ||
1706 | build-dirs := $(KBUILD_EXTMOD) | |
1707 | PHONY += modules | |
1708 | modules: $(MODORDER) | |
1709 | $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost | |
1710 | ||
1711 | $(MODORDER): descend | |
1712 | @: | |
1713 | ||
1714 | PHONY += modules_install | |
1715 | modules_install: _emodinst_ _emodinst_post | |
1716 | ||
1717 | install-dir := $(if $(INSTALL_MOD_DIR),$(INSTALL_MOD_DIR),extra) | |
1718 | PHONY += _emodinst_ | |
1719 | _emodinst_: | |
1720 | $(Q)mkdir -p $(MODLIB)/$(install-dir) | |
1721 | $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst | |
1722 | ||
1723 | PHONY += _emodinst_post | |
1724 | _emodinst_post: _emodinst_ | |
1725 | $(call cmd,depmod) | |
1726 | ||
1727 | compile_commands.json: $(extmod-prefix)compile_commands.json | |
1728 | PHONY += compile_commands.json | |
1729 | ||
1730 | clean-dirs := $(KBUILD_EXTMOD) | |
1731 | clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers $(KBUILD_EXTMOD)/modules.nsdeps \ | |
1732 | $(KBUILD_EXTMOD)/compile_commands.json | |
1733 | ||
1734 | PHONY += help | |
1735 | help: | |
1736 | @echo ' Building external modules.' | |
1737 | @echo ' Syntax: make -C path/to/kernel/src M=$$PWD target' | |
1738 | @echo '' | |
1739 | @echo ' modules - default target, build the module(s)' | |
1740 | @echo ' modules_install - install the module' | |
1741 | @echo ' clean - remove generated files in module directory only' | |
1742 | @echo '' | |
1743 | ||
1744 | # no-op for external module builds | |
1745 | PHONY += prepare modules_prepare | |
1746 | ||
1747 | endif # KBUILD_EXTMOD | |
1748 | ||
1749 | # Single targets | |
1750 | # --------------------------------------------------------------------------- | |
1751 | # To build individual files in subdirectories, you can do like this: | |
1752 | # | |
1753 | # make foo/bar/baz.s | |
1754 | # | |
1755 | # The supported suffixes for single-target are listed in 'single-targets' | |
1756 | # | |
1757 | # To build only under specific subdirectories, you can do like this: | |
1758 | # | |
1759 | # make foo/bar/baz/ | |
1760 | ||
1761 | ifdef single-build | |
1762 | ||
1763 | # .ko is special because modpost is needed | |
1764 | single-ko := $(sort $(filter %.ko, $(MAKECMDGOALS))) | |
1765 | single-no-ko := $(sort $(patsubst %.ko,%.mod, $(MAKECMDGOALS))) | |
1766 | ||
1767 | $(single-ko): single_modpost | |
1768 | @: | |
1769 | $(single-no-ko): descend | |
1770 | @: | |
1771 | ||
1772 | ifeq ($(KBUILD_EXTMOD),) | |
1773 | # For the single build of in-tree modules, use a temporary file to avoid | |
1774 | # the situation of modules_install installing an invalid modules.order. | |
1775 | MODORDER := .modules.tmp | |
1776 | endif | |
1777 | ||
1778 | PHONY += single_modpost | |
1779 | single_modpost: $(single-no-ko) modules_prepare | |
1780 | $(Q){ $(foreach m, $(single-ko), echo $(extmod-prefix)$m;) } > $(MODORDER) | |
1781 | $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost | |
1782 | ||
1783 | KBUILD_MODULES := 1 | |
1784 | ||
1785 | export KBUILD_SINGLE_TARGETS := $(addprefix $(extmod-prefix), $(single-no-ko)) | |
1786 | ||
1787 | # trim unrelated directories | |
1788 | build-dirs := $(foreach d, $(build-dirs), \ | |
1789 | $(if $(filter $(d)/%, $(KBUILD_SINGLE_TARGETS)), $(d))) | |
1790 | ||
1791 | endif | |
1792 | ||
1793 | ifndef CONFIG_MODULES | |
1794 | KBUILD_MODULES := | |
1795 | endif | |
1796 | ||
1797 | # Handle descending into subdirectories listed in $(build-dirs) | |
1798 | # Preset locale variables to speed up the build process. Limit locale | |
1799 | # tweaks to this spot to avoid wrong language settings when running | |
1800 | # make menuconfig etc. | |
1801 | # Error messages still appears in the original language | |
1802 | PHONY += descend $(build-dirs) | |
1803 | descend: $(build-dirs) | |
1804 | $(build-dirs): prepare | |
1805 | $(Q)$(MAKE) $(build)=$@ \ | |
1806 | single-build=$(if $(filter-out $@/, $(filter $@/%, $(KBUILD_SINGLE_TARGETS))),1) \ | |
1807 | need-builtin=1 need-modorder=1 | |
1808 | ||
1809 | clean-dirs := $(addprefix _clean_, $(clean-dirs)) | |
1810 | PHONY += $(clean-dirs) clean | |
1811 | $(clean-dirs): | |
1812 | $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@) | |
1813 | ||
1814 | clean: $(clean-dirs) | |
1815 | $(call cmd,rmfiles) | |
1816 | @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \ | |
1817 | \( -name '*.[aios]' -o -name '*.ko' -o -name '.*.cmd' \ | |
1818 | -o -name '*.ko.*' \ | |
1819 | -o -name '*.dtb' -o -name '*.dtb.S' -o -name '*.dt.yaml' \ | |
1820 | -o -name '*.dwo' -o -name '*.lst' \ | |
1821 | -o -name '*.su' -o -name '*.mod' \ | |
1822 | -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \ | |
1823 | -o -name '*.lex.c' -o -name '*.tab.[ch]' \ | |
1824 | -o -name '*.asn1.[ch]' \ | |
1825 | -o -name '*.symtypes' -o -name 'modules.order' \ | |
1826 | -o -name '.tmp_*.o.*' \ | |
1827 | -o -name '*.c.[012]*.*' \ | |
1828 | -o -name '*.ll' \ | |
1829 | -o -name '*.gcno' \) -type f -print | xargs rm -f | |
1830 | ||
1831 | # Generate tags for editors | |
1832 | # --------------------------------------------------------------------------- | |
1833 | quiet_cmd_tags = GEN $@ | |
1834 | cmd_tags = $(BASH) $(srctree)/scripts/tags.sh $@ | |
1835 | ||
1836 | tags TAGS cscope gtags: FORCE | |
1837 | $(call cmd,tags) | |
1838 | ||
1839 | # Script to generate missing namespace dependencies | |
1840 | # --------------------------------------------------------------------------- | |
1841 | ||
1842 | PHONY += nsdeps | |
1843 | nsdeps: export KBUILD_NSDEPS=1 | |
1844 | nsdeps: modules | |
1845 | $(Q)$(CONFIG_SHELL) $(srctree)/scripts/nsdeps | |
1846 | ||
1847 | # Clang Tooling | |
1848 | # --------------------------------------------------------------------------- | |
1849 | ||
1850 | quiet_cmd_gen_compile_commands = GEN $@ | |
1851 | cmd_gen_compile_commands = $(PYTHON3) $< -a $(AR) -o $@ $(filter-out $<, $(real-prereqs)) | |
1852 | ||
1853 | $(extmod-prefix)compile_commands.json: scripts/clang-tools/gen_compile_commands.py \ | |
1854 | $(if $(KBUILD_EXTMOD),,$(KBUILD_VMLINUX_OBJS) $(KBUILD_VMLINUX_LIBS)) \ | |
1855 | $(if $(CONFIG_MODULES), $(MODORDER)) FORCE | |
1856 | $(call if_changed,gen_compile_commands) | |
1857 | ||
1858 | targets += $(extmod-prefix)compile_commands.json | |
1859 | ||
1860 | PHONY += clang-tidy clang-analyzer | |
1861 | ||
1862 | ifdef CONFIG_CC_IS_CLANG | |
1863 | quiet_cmd_clang_tools = CHECK $< | |
1864 | cmd_clang_tools = $(PYTHON3) $(srctree)/scripts/clang-tools/run-clang-tools.py $@ $< | |
1865 | ||
1866 | clang-tidy clang-analyzer: $(extmod-prefix)compile_commands.json | |
1867 | $(call cmd,clang_tools) | |
1868 | else | |
1869 | clang-tidy clang-analyzer: | |
1870 | @echo "$@ requires CC=clang" >&2 | |
1871 | @false | |
1872 | endif | |
1873 | ||
1874 | # Scripts to check various things for consistency | |
1875 | # --------------------------------------------------------------------------- | |
1876 | ||
1877 | PHONY += includecheck versioncheck coccicheck export_report | |
1878 | ||
1879 | includecheck: | |
1880 | find $(srctree)/* $(RCS_FIND_IGNORE) \ | |
1881 | -name '*.[hcS]' -type f -print | sort \ | |
1882 | | xargs $(PERL) -w $(srctree)/scripts/checkincludes.pl | |
1883 | ||
1884 | versioncheck: | |
1885 | find $(srctree)/* $(RCS_FIND_IGNORE) \ | |
1886 | -name '*.[hcS]' -type f -print | sort \ | |
1887 | | xargs $(PERL) -w $(srctree)/scripts/checkversion.pl | |
1888 | ||
1889 | coccicheck: | |
1890 | $(Q)$(BASH) $(srctree)/scripts/$@ | |
1891 | ||
1892 | export_report: | |
1893 | $(PERL) $(srctree)/scripts/export_report.pl | |
1894 | ||
1895 | PHONY += checkstack kernelrelease kernelversion image_name | |
1896 | ||
1897 | # UML needs a little special treatment here. It wants to use the host | |
1898 | # toolchain, so needs $(SUBARCH) passed to checkstack.pl. Everyone | |
1899 | # else wants $(ARCH), including people doing cross-builds, which means | |
1900 | # that $(SUBARCH) doesn't work here. | |
1901 | ifeq ($(ARCH), um) | |
1902 | CHECKSTACK_ARCH := $(SUBARCH) | |
1903 | else | |
1904 | CHECKSTACK_ARCH := $(ARCH) | |
1905 | endif | |
1906 | checkstack: | |
1907 | $(OBJDUMP) -d vmlinux $$(find . -name '*.ko') | \ | |
1908 | $(PERL) $(srctree)/scripts/checkstack.pl $(CHECKSTACK_ARCH) | |
1909 | ||
1910 | kernelrelease: | |
1911 | @echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))" | |
1912 | ||
1913 | kernelversion: | |
1914 | @echo $(KERNELVERSION) | |
1915 | ||
1916 | image_name: | |
1917 | @echo $(KBUILD_IMAGE) | |
1918 | ||
1919 | # Clear a bunch of variables before executing the submake | |
1920 | ||
1921 | ifeq ($(quiet),silent_) | |
1922 | tools_silent=s | |
1923 | endif | |
1924 | ||
1925 | tools/: FORCE | |
1926 | $(Q)mkdir -p $(objtree)/tools | |
1927 | $(Q)$(MAKE) LDFLAGS= MAKEFLAGS="$(tools_silent) $(filter --j% -j,$(MAKEFLAGS))" O=$(abspath $(objtree)) subdir=tools -C $(srctree)/tools/ | |
1928 | ||
1929 | tools/%: FORCE | |
1930 | $(Q)mkdir -p $(objtree)/tools | |
1931 | $(Q)$(MAKE) LDFLAGS= MAKEFLAGS="$(tools_silent) $(filter --j% -j,$(MAKEFLAGS))" O=$(abspath $(objtree)) subdir=tools -C $(srctree)/tools/ $* | |
1932 | ||
1933 | quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files))) | |
1934 | cmd_rmfiles = rm -rf $(rm-files) | |
1935 | ||
1936 | # Run depmod only if we have System.map and depmod is executable | |
1937 | quiet_cmd_depmod = DEPMOD $(KERNELRELEASE) | |
1938 | cmd_depmod = $(CONFIG_SHELL) $(srctree)/scripts/depmod.sh $(DEPMOD) \ | |
1939 | $(KERNELRELEASE) | |
1940 | ||
1941 | # read saved command lines for existing targets | |
1942 | existing-targets := $(wildcard $(sort $(targets))) | |
1943 | ||
1944 | -include $(foreach f,$(existing-targets),$(dir $(f)).$(notdir $(f)).cmd) | |
1945 | ||
1946 | endif # config-build | |
1947 | endif # mixed-build | |
1948 | endif # need-sub-make | |
1949 | ||
1950 | PHONY += FORCE | |
1951 | FORCE: | |
1952 | ||
1953 | # Declare the contents of the PHONY variable as phony. We keep that | |
1954 | # information in a variable so we can use it in if_changed and friends. | |
1955 | .PHONY: $(PHONY) |