[mirror_qemu.git] / Makefile

# Makefile for QEMU.

ifneq ($(wildcard config-host.mak),)
# Put the all: rule here so that config-host.mak can contain dependencies.
all: build-all
include config-host.mak
include $(SRC_PATH)/rules.mak
else
config-host.mak:
	@echo "Please call configure before running make!"
	@exit 1
endif

.PHONY: all clean cscope distclean dvi html info install install-doc \
	recurse-all speed tar tarbin test

VPATH=$(SRC_PATH):$(SRC_PATH)/hw

CPPFLAGS += -I. -I$(SRC_PATH) -MMD -MP -MT $@
CPPFLAGS += -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE
CPPFLAGS += -U_FORTIFY_SOURCE
LIBS=
ifdef CONFIG_STATIC
LDFLAGS += -static
endif
ifdef BUILD_DOCS
DOCS=qemu-doc.html qemu-tech.html qemu.1 qemu-img.1 qemu-nbd.8
else
DOCS=
endif

LIBS+=$(PTHREADLIBS)
LIBS+=$(CLOCKLIBS)

ifdef CONFIG_SOLARIS
LIBS+=-lsocket -lnsl -lresolv
endif

ifdef CONFIG_WIN32
LIBS+=-lwinmm -lws2_32 -liphlpapi
endif

build-all: $(TOOLS) $(DOCS) roms recurse-all

config-host.mak: configure
ifneq ($(wildcard config-host.mak),)
	@echo $@ is out-of-date, running configure
	@sed -n "/.*Configured with/s/[^:]*: //p" $@ | sh
endif

SUBDIR_MAKEFLAGS=$(if $(V),,--no-print-directory)
SUBDIR_RULES=$(patsubst %,subdir-%, $(TARGET_DIRS))

subdir-%:
	$(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C $* V="$(V)" TARGET_DIR="$*/" all,)

$(filter %-softmmu,$(SUBDIR_RULES)): libqemu_common.a
$(filter %-user,$(SUBDIR_RULES)): libqemu_user.a

recurse-all: $(SUBDIR_RULES)

#######################################################################
# block-obj-y is code used by both qemu system emulation and qemu-img

block-obj-y = cutils.o cache-utils.o qemu-malloc.o qemu-option.o module.o
block-obj-y += nbd.o block.o aio.o aes.o

block-nested-y += cow.o qcow.o vmdk.o cloop.o dmg.o bochs.o vpc.o vvfat.o
block-nested-y += qcow2.o qcow2-refcount.o qcow2-cluster.o qcow2-snapshot.o
block-nested-y += parallels.o nbd.o


ifdef CONFIG_WIN32
block-nested-y += raw-win32.o
else
ifdef CONFIG_AIO
block-obj-y += posix-aio-compat.o
endif
block-nested-y += raw-posix.o
endif

block-nested-$(CONFIG_CURL) += curl.o

block-obj-y +=  $(addprefix block/, $(block-nested-y))

######################################################################
# libqemu_common.a: Target independent part of system emulation. The
# long term path is to suppress *all* target specific code in case of
# system emulation, i.e. a single QEMU executable should support all
# CPUs and machines.

obj-y = $(block-obj-y)
obj-y += readline.o console.o

obj-y += irq.o ptimer.o
obj-y += i2c.o smbus.o smbus_eeprom.o max7310.o max111x.o wm8750.o
obj-y += ssd0303.o ssd0323.o ads7846.o stellaris_input.o twl92230.o
obj-y += tmp105.o lm832x.o eeprom93xx.o tsc2005.o
obj-y += scsi-disk.o cdrom.o
obj-y += scsi-generic.o
obj-y += usb.o usb-hub.o usb-$(HOST_USB).o usb-hid.o usb-msd.o usb-wacom.o
obj-y += usb-serial.o usb-net.o
obj-y += sd.o ssi-sd.o
obj-y += bt.o bt-host.o bt-vhci.o bt-l2cap.o bt-sdp.o bt-hci.o bt-hid.o usb-bt.o
obj-y += bt-hci-csr.o
obj-y += buffered_file.o migration.o migration-tcp.o net.o qemu-sockets.o
obj-y += qemu-char.o aio.o net-checksum.o savevm.o
obj-y += msmouse.o ps2.o
obj-y += qdev.o qdev-properties.o ssi.o

obj-$(CONFIG_BRLAPI) += baum.o

ifdef CONFIG_BRLAPI
LIBS+=-lbrlapi
endif

ifdef CONFIG_WIN32
obj-y += tap-win32.o
else
obj-y += migration-exec.o
endif

ifdef CONFIG_COREAUDIO
AUDIO_PT = y
endif
ifdef CONFIG_FMOD
audio/audio.o audio/fmodaudio.o: CPPFLAGS := -I$(CONFIG_FMOD_INC) $(CPPFLAGS)
endif
ifdef CONFIG_ESD
AUDIO_PT = y
AUDIO_PT_INT = y
endif
ifdef CONFIG_PA
AUDIO_PT = y
AUDIO_PT_INT = y
endif
ifdef AUDIO_PT
LDFLAGS += -pthread
endif

audio-obj-y = audio.o noaudio.o wavaudio.o mixeng.o
audio-obj-$(CONFIG_SDL) += sdlaudio.o
audio-obj-$(CONFIG_OSS) += ossaudio.o
audio-obj-$(CONFIG_COREAUDIO) += coreaudio.o
audio-obj-$(CONFIG_ALSA) += alsaaudio.o
audio-obj-$(CONFIG_DSOUND) += dsoundaudio.o
audio-obj-$(CONFIG_FMOD) += fmodaudio.o
audio-obj-$(CONFIG_ESD) += esdaudio.o
audio-obj-$(CONFIG_PA) += paaudio.o
audio-obj-$(AUDIO_PT_INT) += audio_pt_int.o
audio-obj-y += wavcapture.o
obj-y += $(addprefix audio/, $(audio-obj-y))

obj-y += keymaps.o
obj-$(CONFIG_SDL) += sdl.o sdl_zoom.o x_keymap.o
obj-$(CONFIG_CURSES) += curses.o
obj-y += vnc.o acl.o d3des.o
obj-$(CONFIG_VNC_TLS) += vnc-tls.o vnc-auth-vencrypt.o
obj-$(CONFIG_VNC_SASL) += vnc-auth-sasl.o
obj-$(CONFIG_COCOA) += cocoa.o
obj-$(CONFIG_IOTHREAD) += qemu-thread.o

ifdef CONFIG_SLIRP
CPPFLAGS+=-I$(SRC_PATH)/slirp
endif

slirp-obj-y = cksum.o if.o ip_icmp.o ip_input.o ip_output.o
slirp-obj-y += slirp.o mbuf.o misc.o sbuf.o socket.o tcp_input.o tcp_output.o
slirp-obj-y += tcp_subr.o tcp_timer.o udp.o bootp.o tftp.o
obj-$(CONFIG_SLIRP) += $(addprefix slirp/, $(slirp-obj-y))

LIBS+=$(VDE_LIBS)

# xen backend driver support
obj-$(CONFIG_XEN) += xen_backend.o xen_devconfig.o
obj-$(CONFIG_XEN) += xen_console.o xenfb.o xen_disk.o xen_nic.o

LIBS+=$(CURL_LIBS)

cocoa.o: cocoa.m

keymaps.o: keymaps.c keymaps.h

sdl_zoom.o: sdl_zoom.c sdl_zoom.h sdl_zoom_template.h

sdl.o: sdl.c keymaps.h sdl_keysym.h sdl_zoom.h

sdl.o audio/sdlaudio.o sdl_zoom.o baum.o: CFLAGS += $(SDL_CFLAGS)

acl.o: acl.h acl.c

vnc.h: vnc-tls.h vnc-auth-vencrypt.h vnc-auth-sasl.h keymaps.h

vnc.o: vnc.c vnc.h vnc_keysym.h vnchextile.h d3des.c d3des.h acl.h

vnc.o: CFLAGS += $(VNC_TLS_CFLAGS)

vnc-tls.o: vnc-tls.c vnc.h

vnc-auth-vencrypt.o: vnc-auth-vencrypt.c vnc.h

vnc-auth-sasl.o: vnc-auth-sasl.c vnc.h

curses.o: curses.c keymaps.h curses_keys.h

bt-host.o: CFLAGS += $(CONFIG_BLUEZ_CFLAGS)

libqemu_common.a: $(obj-y)

#######################################################################
# user-obj-y is code used by qemu userspace emulation
user-obj-y = cutils.o cache-utils.o

libqemu_user.a: $(user-obj-y)

######################################################################

qemu-img.o: qemu-img-cmds.h

qemu-img$(EXESUF): qemu-img.o qemu-tool.o tool-osdep.o $(block-obj-y)

qemu-nbd$(EXESUF):  qemu-nbd.o qemu-tool.o tool-osdep.o $(block-obj-y)

qemu-io$(EXESUF):  qemu-io.o qemu-tool.o tool-osdep.o cmd.o $(block-obj-y)

qemu-img$(EXESUF) qemu-nbd$(EXESUF) qemu-io$(EXESUF): LIBS += -lz

qemu-img-cmds.h: $(SRC_PATH)/qemu-img-cmds.hx
	$(call quiet-command,sh $(SRC_PATH)/hxtool -h < $< > $@,"  GEN   $@")

clean:
# avoid old build problems by removing potentially incorrect old files
	rm -f config.mak config.h op-i386.h opc-i386.h gen-op-i386.h op-arm.h opc-arm.h gen-op-arm.h
	rm -f *.o *.d *.a $(TOOLS) TAGS cscope.* *.pod *~ */*~
	rm -f slirp/*.o slirp/*.d audio/*.o audio/*.d block/*.o block/*.d
	rm -f qemu-img-cmds.h
	$(MAKE) -C tests clean
	for d in $(TARGET_DIRS) $(ROMS) libhw32 libhw64; do \
	$(MAKE) -C $$d $@ || exit 1 ; \
        done

distclean: clean
	rm -f config-host.mak config-host.h $(DOCS) qemu-options.texi qemu-img-cmds.texi
	rm -f qemu-{doc,tech}.{info,aux,cp,dvi,fn,info,ky,log,pg,toc,tp,vr}
	for d in $(TARGET_DIRS) libhw32 libhw64; do \
	rm -rf $$d || exit 1 ; \
        done

KEYMAPS=da     en-gb  et  fr     fr-ch  is  lt  modifiers  no  pt-br  sv \
ar      de     en-us  fi  fr-be  hr     it  lv  nl         pl  ru     th \
common  de-ch  es     fo  fr-ca  hu     ja  mk  nl-be      pt  sl     tr

ifdef INSTALL_BLOBS
BLOBS=bios.bin vgabios.bin vgabios-cirrus.bin ppc_rom.bin \
video.x openbios-sparc32 openbios-sparc64 openbios-ppc \
pxe-ne2k_pci.bin pxe-rtl8139.bin pxe-pcnet.bin pxe-e1000.bin \
bamboo.dtb petalogix-s3adsp1800.dtb \
multiboot.bin
else
BLOBS=
endif

roms:
	for d in $(ROMS); do \
	$(MAKE) -C $$d || exit 1 ; \
        done

install-doc: $(DOCS)
	$(INSTALL_DIR) "$(DESTDIR)$(docdir)"
	$(INSTALL_DATA) qemu-doc.html  qemu-tech.html "$(DESTDIR)$(docdir)"
ifndef CONFIG_WIN32
	$(INSTALL_DIR) "$(DESTDIR)$(mandir)/man1"
	$(INSTALL_DATA) qemu.1 qemu-img.1 "$(DESTDIR)$(mandir)/man1"
	$(INSTALL_DIR) "$(DESTDIR)$(mandir)/man8"
	$(INSTALL_DATA) qemu-nbd.8 "$(DESTDIR)$(mandir)/man8"
endif

install: all $(if $(BUILD_DOCS),install-doc)
	$(INSTALL_DIR) "$(DESTDIR)$(bindir)"
ifneq ($(TOOLS),)
	$(INSTALL_PROG) $(STRIP_OPT) $(TOOLS) "$(DESTDIR)$(bindir)"
endif
ifneq ($(BLOBS),)
	$(INSTALL_DIR) "$(DESTDIR)$(datadir)"
	set -e; for x in $(BLOBS); do \
		$(INSTALL_DATA) $(SRC_PATH)/pc-bios/$$x "$(DESTDIR)$(datadir)"; \
	done
endif
	$(INSTALL_DIR) "$(DESTDIR)$(datadir)/keymaps"
	set -e; for x in $(KEYMAPS); do \
		$(INSTALL_DATA) $(SRC_PATH)/pc-bios/keymaps/$$x "$(DESTDIR)$(datadir)/keymaps"; \
	done
	for d in $(TARGET_DIRS); do \
	$(MAKE) -C $$d $@ || exit 1 ; \
        done

# various test targets
test speed: all
	$(MAKE) -C tests $@

TAGS:
	etags *.[ch] tests/*.[ch] block/*.[ch] hw/*.[ch]

cscope:
	rm -f ./cscope.*
	find . -name "*.[ch]" -print | sed 's,^\./,,' > ./cscope.files
	cscope -b

# documentation
%.html: %.texi
	$(call quiet-command,texi2html -I=. -monolithic -number $<,"  GEN   $@")

%.info: %.texi
	$(call quiet-command,makeinfo -I . $< -o $@,"  GEN   $@")

%.dvi: %.texi
	$(call quiet-command,texi2dvi -I . $<,"  GEN   $@")

qemu-options.texi: $(SRC_PATH)/qemu-options.hx
	$(call quiet-command,sh $(SRC_PATH)/hxtool -t < $< > $@,"  GEN   $@")

qemu-monitor.texi: $(SRC_PATH)/qemu-monitor.hx
	$(call quiet-command,sh $(SRC_PATH)/hxtool -t < $< > $@,"  GEN   $@")

qemu-img-cmds.texi: $(SRC_PATH)/qemu-img-cmds.hx
	$(call quiet-command,sh $(SRC_PATH)/hxtool -t < $< > $@,"  GEN   $@")

qemu.1: qemu-doc.texi qemu-options.texi qemu-monitor.texi
	$(call quiet-command, \
	  perl -Ww -- $(SRC_PATH)/texi2pod.pl $< qemu.pod && \
	  pod2man --section=1 --center=" " --release=" " qemu.pod > $@, \
	  "  GEN   $@")

qemu-img.1: qemu-img.texi qemu-img-cmds.texi
	$(call quiet-command, \
	  perl -Ww -- $(SRC_PATH)/texi2pod.pl $< qemu-img.pod && \
	  pod2man --section=1 --center=" " --release=" " qemu-img.pod > $@, \
	  "  GEN   $@")

qemu-nbd.8: qemu-nbd.texi
	$(call quiet-command, \
	  perl -Ww -- $(SRC_PATH)/texi2pod.pl $< qemu-nbd.pod && \
	  pod2man --section=8 --center=" " --release=" " qemu-nbd.pod > $@, \
	  "  GEN   $@")

info: qemu-doc.info qemu-tech.info

dvi: qemu-doc.dvi qemu-tech.dvi

html: qemu-doc.html qemu-tech.html

qemu-doc.dvi qemu-doc.html qemu-doc.info: qemu-img.texi qemu-nbd.texi qemu-options.texi qemu-monitor.texi qemu-img-cmds.texi

VERSION ?= $(shell cat VERSION)
FILE = qemu-$(VERSION)

# tar release (use 'make -k tar' on a checkouted tree)
tar:
	rm -rf /tmp/$(FILE)
	cp -r . /tmp/$(FILE)
	cd /tmp && tar zcvf ~/$(FILE).tar.gz $(FILE) --exclude CVS --exclude .git --exclude .svn
	rm -rf /tmp/$(FILE)

# generate a binary distribution
tarbin:
	cd / && tar zcvf ~/qemu-$(VERSION)-$(ARCH).tar.gz \
	$(bindir)/qemu \
	$(bindir)/qemu-system-x86_64 \
	$(bindir)/qemu-system-arm \
	$(bindir)/qemu-system-cris \
	$(bindir)/qemu-system-m68k \
	$(bindir)/qemu-system-mips \
	$(bindir)/qemu-system-mipsel \
	$(bindir)/qemu-system-mips64 \
	$(bindir)/qemu-system-mips64el \
	$(bindir)/qemu-system-ppc \
	$(bindir)/qemu-system-ppcemb \
	$(bindir)/qemu-system-ppc64 \
	$(bindir)/qemu-system-sh4 \
	$(bindir)/qemu-system-sh4eb \
	$(bindir)/qemu-system-sparc \
	$(bindir)/qemu-i386 \
	$(bindir)/qemu-x86_64 \
	$(bindir)/qemu-alpha \
	$(bindir)/qemu-arm \
	$(bindir)/qemu-armeb \
	$(bindir)/qemu-cris \
	$(bindir)/qemu-m68k \
	$(bindir)/qemu-mips \
	$(bindir)/qemu-mipsel \
	$(bindir)/qemu-ppc \
	$(bindir)/qemu-ppc64 \
	$(bindir)/qemu-ppc64abi32 \
	$(bindir)/qemu-sh4 \
	$(bindir)/qemu-sh4eb \
	$(bindir)/qemu-sparc \
	$(bindir)/qemu-sparc64 \
	$(bindir)/qemu-sparc32plus \
	$(bindir)/qemu-img \
	$(bindir)/qemu-nbd \
	$(datadir)/bios.bin \
	$(datadir)/vgabios.bin \
	$(datadir)/vgabios-cirrus.bin \
	$(datadir)/ppc_rom.bin \
	$(datadir)/video.x \
	$(datadir)/openbios-sparc32 \
	$(datadir)/openbios-sparc64 \
	$(datadir)/openbios-ppc \
	$(datadir)/pxe-ne2k_pci.bin \
	$(datadir)/pxe-rtl8139.bin \
	$(datadir)/pxe-pcnet.bin \
	$(datadir)/pxe-e1000.bin \
	$(docdir)/qemu-doc.html \
	$(docdir)/qemu-tech.html \
	$(mandir)/man1/qemu.1 \
	$(mandir)/man1/qemu-img.1 \
	$(mandir)/man8/qemu-nbd.8

# Include automatically generated dependency files
-include $(wildcard *.d audio/*.d slirp/*.d block/*.d)
Commit	Line	Data
	1	# Makefile for QEMU.
	2
	3	ifneq ($(wildcard config-host.mak),)
	4	# Put the all: rule here so that config-host.mak can contain dependencies.
	5	all: build-all
	6	include config-host.mak
	7	include $(SRC_PATH)/rules.mak
	8	else
	9	config-host.mak:
	10	@echo "Please call configure before running make!"
	11	@exit 1
	12	endif
	13
	14	.PHONY: all clean cscope distclean dvi html info install install-doc \
	15	recurse-all speed tar tarbin test
	16
	17	VPATH=$(SRC_PATH):$(SRC_PATH)/hw
	18
	19	CPPFLAGS += -I. -I$(SRC_PATH) -MMD -MP -MT $@
	20	CPPFLAGS += -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE
	21	CPPFLAGS += -U_FORTIFY_SOURCE
	22	LIBS=
	23	ifdef CONFIG_STATIC
	24	LDFLAGS += -static
	25	endif
	26	ifdef BUILD_DOCS
	27	DOCS=qemu-doc.html qemu-tech.html qemu.1 qemu-img.1 qemu-nbd.8
	28	else
	29	DOCS=
	30	endif
	31
	32	LIBS+=$(PTHREADLIBS)
	33	LIBS+=$(CLOCKLIBS)
	34
	35	ifdef CONFIG_SOLARIS
	36	LIBS+=-lsocket -lnsl -lresolv
	37	endif
	38
	39	ifdef CONFIG_WIN32
	40	LIBS+=-lwinmm -lws2_32 -liphlpapi
	41	endif
	42
	43	build-all: $(TOOLS) $(DOCS) roms recurse-all
	44
	45	config-host.mak: configure
	46	ifneq ($(wildcard config-host.mak),)
	47	@echo $@ is out-of-date, running configure
	48	@sed -n "/.Configured with/s/[^:]: //p" $@ \| sh
	49	endif
	50
	51	SUBDIR_MAKEFLAGS=$(if $(V),,--no-print-directory)
	52	SUBDIR_RULES=$(patsubst %,subdir-%, $(TARGET_DIRS))
	53
	54	subdir-%:
	55	$(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C $* V="$(V)" TARGET_DIR="$*/" all,)
	56
	57	$(filter %-softmmu,$(SUBDIR_RULES)): libqemu_common.a
	58	$(filter %-user,$(SUBDIR_RULES)): libqemu_user.a
	59
	60	recurse-all: $(SUBDIR_RULES)
	61
	62	#######################################################################
	63	# block-obj-y is code used by both qemu system emulation and qemu-img
	64
	65	block-obj-y = cutils.o cache-utils.o qemu-malloc.o qemu-option.o module.o
	66	block-obj-y += nbd.o block.o aio.o aes.o
	67
	68	block-nested-y += cow.o qcow.o vmdk.o cloop.o dmg.o bochs.o vpc.o vvfat.o
	69	block-nested-y += qcow2.o qcow2-refcount.o qcow2-cluster.o qcow2-snapshot.o
	70	block-nested-y += parallels.o nbd.o
	71
	72
	73	ifdef CONFIG_WIN32
	74	block-nested-y += raw-win32.o
	75	else
	76	ifdef CONFIG_AIO
	77	block-obj-y += posix-aio-compat.o
	78	endif
	79	block-nested-y += raw-posix.o
	80	endif
	81
	82	block-nested-$(CONFIG_CURL) += curl.o
	83
	84	block-obj-y += $(addprefix block/, $(block-nested-y))
	85
	86	######################################################################
	87	# libqemu_common.a: Target independent part of system emulation. The
	88	# long term path is to suppress all target specific code in case of
	89	# system emulation, i.e. a single QEMU executable should support all
	90	# CPUs and machines.
	91
	92	obj-y = $(block-obj-y)
	93	obj-y += readline.o console.o
	94
	95	obj-y += irq.o ptimer.o
	96	obj-y += i2c.o smbus.o smbus_eeprom.o max7310.o max111x.o wm8750.o
	97	obj-y += ssd0303.o ssd0323.o ads7846.o stellaris_input.o twl92230.o
	98	obj-y += tmp105.o lm832x.o eeprom93xx.o tsc2005.o
	99	obj-y += scsi-disk.o cdrom.o
	100	obj-y += scsi-generic.o
	101	obj-y += usb.o usb-hub.o usb-$(HOST_USB).o usb-hid.o usb-msd.o usb-wacom.o
	102	obj-y += usb-serial.o usb-net.o
	103	obj-y += sd.o ssi-sd.o
	104	obj-y += bt.o bt-host.o bt-vhci.o bt-l2cap.o bt-sdp.o bt-hci.o bt-hid.o usb-bt.o
	105	obj-y += bt-hci-csr.o
	106	obj-y += buffered_file.o migration.o migration-tcp.o net.o qemu-sockets.o
	107	obj-y += qemu-char.o aio.o net-checksum.o savevm.o
	108	obj-y += msmouse.o ps2.o
	109	obj-y += qdev.o qdev-properties.o ssi.o
	110
	111	obj-$(CONFIG_BRLAPI) += baum.o
	112
	113	ifdef CONFIG_BRLAPI
	114	LIBS+=-lbrlapi
	115	endif
	116
	117	ifdef CONFIG_WIN32
	118	obj-y += tap-win32.o
	119	else
	120	obj-y += migration-exec.o
	121	endif
	122
	123	ifdef CONFIG_COREAUDIO
	124	AUDIO_PT = y
	125	endif
	126	ifdef CONFIG_FMOD
	127	audio/audio.o audio/fmodaudio.o: CPPFLAGS := -I$(CONFIG_FMOD_INC) $(CPPFLAGS)
	128	endif
	129	ifdef CONFIG_ESD
	130	AUDIO_PT = y
	131	AUDIO_PT_INT = y
	132	endif
	133	ifdef CONFIG_PA
	134	AUDIO_PT = y
	135	AUDIO_PT_INT = y
	136	endif
	137	ifdef AUDIO_PT
	138	LDFLAGS += -pthread
	139	endif
	140
	141	audio-obj-y = audio.o noaudio.o wavaudio.o mixeng.o
	142	audio-obj-$(CONFIG_SDL) += sdlaudio.o
	143	audio-obj-$(CONFIG_OSS) += ossaudio.o
	144	audio-obj-$(CONFIG_COREAUDIO) += coreaudio.o
	145	audio-obj-$(CONFIG_ALSA) += alsaaudio.o
	146	audio-obj-$(CONFIG_DSOUND) += dsoundaudio.o
	147	audio-obj-$(CONFIG_FMOD) += fmodaudio.o
	148	audio-obj-$(CONFIG_ESD) += esdaudio.o
	149	audio-obj-$(CONFIG_PA) += paaudio.o
	150	audio-obj-$(AUDIO_PT_INT) += audio_pt_int.o
	151	audio-obj-y += wavcapture.o
	152	obj-y += $(addprefix audio/, $(audio-obj-y))
	153
	154	obj-y += keymaps.o
	155	obj-$(CONFIG_SDL) += sdl.o sdl_zoom.o x_keymap.o
	156	obj-$(CONFIG_CURSES) += curses.o
	157	obj-y += vnc.o acl.o d3des.o
	158	obj-$(CONFIG_VNC_TLS) += vnc-tls.o vnc-auth-vencrypt.o
	159	obj-$(CONFIG_VNC_SASL) += vnc-auth-sasl.o
	160	obj-$(CONFIG_COCOA) += cocoa.o
	161	obj-$(CONFIG_IOTHREAD) += qemu-thread.o
	162
	163	ifdef CONFIG_SLIRP
	164	CPPFLAGS+=-I$(SRC_PATH)/slirp
	165	endif
	166
	167	slirp-obj-y = cksum.o if.o ip_icmp.o ip_input.o ip_output.o
	168	slirp-obj-y += slirp.o mbuf.o misc.o sbuf.o socket.o tcp_input.o tcp_output.o
	169	slirp-obj-y += tcp_subr.o tcp_timer.o udp.o bootp.o tftp.o
	170	obj-$(CONFIG_SLIRP) += $(addprefix slirp/, $(slirp-obj-y))
	171
	172	LIBS+=$(VDE_LIBS)
	173
	174	# xen backend driver support
	175	obj-$(CONFIG_XEN) += xen_backend.o xen_devconfig.o
	176	obj-$(CONFIG_XEN) += xen_console.o xenfb.o xen_disk.o xen_nic.o
	177
	178	LIBS+=$(CURL_LIBS)
	179
	180	cocoa.o: cocoa.m
	181
	182	keymaps.o: keymaps.c keymaps.h
	183
	184	sdl_zoom.o: sdl_zoom.c sdl_zoom.h sdl_zoom_template.h
	185
	186	sdl.o: sdl.c keymaps.h sdl_keysym.h sdl_zoom.h
	187
	188	sdl.o audio/sdlaudio.o sdl_zoom.o baum.o: CFLAGS += $(SDL_CFLAGS)
	189
	190	acl.o: acl.h acl.c
	191
	192	vnc.h: vnc-tls.h vnc-auth-vencrypt.h vnc-auth-sasl.h keymaps.h
	193
	194	vnc.o: vnc.c vnc.h vnc_keysym.h vnchextile.h d3des.c d3des.h acl.h
	195
	196	vnc.o: CFLAGS += $(VNC_TLS_CFLAGS)
	197
	198	vnc-tls.o: vnc-tls.c vnc.h
	199
	200	vnc-auth-vencrypt.o: vnc-auth-vencrypt.c vnc.h
	201
	202	vnc-auth-sasl.o: vnc-auth-sasl.c vnc.h
	203
	204	curses.o: curses.c keymaps.h curses_keys.h
	205
	206	bt-host.o: CFLAGS += $(CONFIG_BLUEZ_CFLAGS)
	207
	208	libqemu_common.a: $(obj-y)
	209
	210	#######################################################################
	211	# user-obj-y is code used by qemu userspace emulation
	212	user-obj-y = cutils.o cache-utils.o
	213
	214	libqemu_user.a: $(user-obj-y)
	215
	216	######################################################################
	217
	218	qemu-img.o: qemu-img-cmds.h
	219
	220	qemu-img$(EXESUF): qemu-img.o qemu-tool.o tool-osdep.o $(block-obj-y)
	221
	222	qemu-nbd$(EXESUF): qemu-nbd.o qemu-tool.o tool-osdep.o $(block-obj-y)
	223
	224	qemu-io$(EXESUF): qemu-io.o qemu-tool.o tool-osdep.o cmd.o $(block-obj-y)
	225
	226	qemu-img$(EXESUF) qemu-nbd$(EXESUF) qemu-io$(EXESUF): LIBS += -lz
	227
	228	qemu-img-cmds.h: $(SRC_PATH)/qemu-img-cmds.hx
	229	$(call quiet-command,sh $(SRC_PATH)/hxtool -h < $< > $@," GEN $@")
	230
	231	clean:
	232	# avoid old build problems by removing potentially incorrect old files
	233	rm -f config.mak config.h op-i386.h opc-i386.h gen-op-i386.h op-arm.h opc-arm.h gen-op-arm.h
	234	rm -f .o .d .a $(TOOLS) TAGS cscope. .pod ~ /~
	235	rm -f slirp/.o slirp/.d audio/.o audio/.d block/.o block/.d
	236	rm -f qemu-img-cmds.h
	237	$(MAKE) -C tests clean
	238	for d in $(TARGET_DIRS) $(ROMS) libhw32 libhw64; do \
	239	$(MAKE) -C $$d $@ \|\| exit 1 ; \
	240	done
	241
	242	distclean: clean
	243	rm -f config-host.mak config-host.h $(DOCS) qemu-options.texi qemu-img-cmds.texi
	244	rm -f qemu-{doc,tech}.{info,aux,cp,dvi,fn,info,ky,log,pg,toc,tp,vr}
	245	for d in $(TARGET_DIRS) libhw32 libhw64; do \
	246	rm -rf $$d \|\| exit 1 ; \
	247	done
	248
	249	KEYMAPS=da en-gb et fr fr-ch is lt modifiers no pt-br sv \
	250	ar de en-us fi fr-be hr it lv nl pl ru th \
	251	common de-ch es fo fr-ca hu ja mk nl-be pt sl tr
	252
	253	ifdef INSTALL_BLOBS
	254	BLOBS=bios.bin vgabios.bin vgabios-cirrus.bin ppc_rom.bin \
	255	video.x openbios-sparc32 openbios-sparc64 openbios-ppc \
	256	pxe-ne2k_pci.bin pxe-rtl8139.bin pxe-pcnet.bin pxe-e1000.bin \
	257	bamboo.dtb petalogix-s3adsp1800.dtb \
	258	multiboot.bin
	259	else
	260	BLOBS=
	261	endif
	262
	263	roms:
	264	for d in $(ROMS); do \
	265	$(MAKE) -C $$d \|\| exit 1 ; \
	266	done
	267
	268	install-doc: $(DOCS)
	269	$(INSTALL_DIR) "$(DESTDIR)$(docdir)"
	270	$(INSTALL_DATA) qemu-doc.html qemu-tech.html "$(DESTDIR)$(docdir)"
	271	ifndef CONFIG_WIN32
	272	$(INSTALL_DIR) "$(DESTDIR)$(mandir)/man1"
	273	$(INSTALL_DATA) qemu.1 qemu-img.1 "$(DESTDIR)$(mandir)/man1"
	274	$(INSTALL_DIR) "$(DESTDIR)$(mandir)/man8"
	275	$(INSTALL_DATA) qemu-nbd.8 "$(DESTDIR)$(mandir)/man8"
	276	endif
	277
	278	install: all $(if $(BUILD_DOCS),install-doc)
	279	$(INSTALL_DIR) "$(DESTDIR)$(bindir)"
	280	ifneq ($(TOOLS),)
	281	$(INSTALL_PROG) $(STRIP_OPT) $(TOOLS) "$(DESTDIR)$(bindir)"
	282	endif
	283	ifneq ($(BLOBS),)
	284	$(INSTALL_DIR) "$(DESTDIR)$(datadir)"
	285	set -e; for x in $(BLOBS); do \
	286	$(INSTALL_DATA) $(SRC_PATH)/pc-bios/$$x "$(DESTDIR)$(datadir)"; \
	287	done
	288	endif
	289	$(INSTALL_DIR) "$(DESTDIR)$(datadir)/keymaps"
	290	set -e; for x in $(KEYMAPS); do \
	291	$(INSTALL_DATA) $(SRC_PATH)/pc-bios/keymaps/$$x "$(DESTDIR)$(datadir)/keymaps"; \
	292	done
	293	for d in $(TARGET_DIRS); do \
	294	$(MAKE) -C $$d $@ \|\| exit 1 ; \
	295	done
	296
	297	# various test targets
	298	test speed: all
	299	$(MAKE) -C tests $@
	300
	301	TAGS:
	302	etags .[ch] tests/.[ch] block/.[ch] hw/.[ch]
	303
	304	cscope:
	305	rm -f ./cscope.*
	306	find . -name "*.[ch]" -print \| sed 's,^\./,,' > ./cscope.files
	307	cscope -b
	308
	309	# documentation
	310	%.html: %.texi
	311	$(call quiet-command,texi2html -I=. -monolithic -number $<," GEN $@")
	312
	313	%.info: %.texi
	314	$(call quiet-command,makeinfo -I . $< -o $@," GEN $@")
	315
	316	%.dvi: %.texi
	317	$(call quiet-command,texi2dvi -I . $<," GEN $@")
	318
	319	qemu-options.texi: $(SRC_PATH)/qemu-options.hx
	320	$(call quiet-command,sh $(SRC_PATH)/hxtool -t < $< > $@," GEN $@")
	321
	322	qemu-monitor.texi: $(SRC_PATH)/qemu-monitor.hx
	323	$(call quiet-command,sh $(SRC_PATH)/hxtool -t < $< > $@," GEN $@")
	324
	325	qemu-img-cmds.texi: $(SRC_PATH)/qemu-img-cmds.hx
	326	$(call quiet-command,sh $(SRC_PATH)/hxtool -t < $< > $@," GEN $@")
	327
	328	qemu.1: qemu-doc.texi qemu-options.texi qemu-monitor.texi
	329	$(call quiet-command, \
	330	perl -Ww -- $(SRC_PATH)/texi2pod.pl $< qemu.pod && \
	331	pod2man --section=1 --center=" " --release=" " qemu.pod > $@, \
	332	" GEN $@")
	333
	334	qemu-img.1: qemu-img.texi qemu-img-cmds.texi
	335	$(call quiet-command, \
	336	perl -Ww -- $(SRC_PATH)/texi2pod.pl $< qemu-img.pod && \
	337	pod2man --section=1 --center=" " --release=" " qemu-img.pod > $@, \
	338	" GEN $@")
	339
	340	qemu-nbd.8: qemu-nbd.texi
	341	$(call quiet-command, \
	342	perl -Ww -- $(SRC_PATH)/texi2pod.pl $< qemu-nbd.pod && \
	343	pod2man --section=8 --center=" " --release=" " qemu-nbd.pod > $@, \
	344	" GEN $@")
	345
	346	info: qemu-doc.info qemu-tech.info
	347
	348	dvi: qemu-doc.dvi qemu-tech.dvi
	349
	350	html: qemu-doc.html qemu-tech.html
	351
	352	qemu-doc.dvi qemu-doc.html qemu-doc.info: qemu-img.texi qemu-nbd.texi qemu-options.texi qemu-monitor.texi qemu-img-cmds.texi
	353
	354	VERSION ?= $(shell cat VERSION)
	355	FILE = qemu-$(VERSION)
	356
	357	# tar release (use 'make -k tar' on a checkouted tree)
	358	tar:
	359	rm -rf /tmp/$(FILE)
	360	cp -r . /tmp/$(FILE)
	361	cd /tmp && tar zcvf ~/$(FILE).tar.gz $(FILE) --exclude CVS --exclude .git --exclude .svn
	362	rm -rf /tmp/$(FILE)
	363
	364	# generate a binary distribution
	365	tarbin:
	366	cd / && tar zcvf ~/qemu-$(VERSION)-$(ARCH).tar.gz \
	367	$(bindir)/qemu \
	368	$(bindir)/qemu-system-x86_64 \
	369	$(bindir)/qemu-system-arm \
	370	$(bindir)/qemu-system-cris \
	371	$(bindir)/qemu-system-m68k \
	372	$(bindir)/qemu-system-mips \
	373	$(bindir)/qemu-system-mipsel \
	374	$(bindir)/qemu-system-mips64 \
	375	$(bindir)/qemu-system-mips64el \
	376	$(bindir)/qemu-system-ppc \
	377	$(bindir)/qemu-system-ppcemb \
	378	$(bindir)/qemu-system-ppc64 \
	379	$(bindir)/qemu-system-sh4 \
	380	$(bindir)/qemu-system-sh4eb \
	381	$(bindir)/qemu-system-sparc \
	382	$(bindir)/qemu-i386 \
	383	$(bindir)/qemu-x86_64 \
	384	$(bindir)/qemu-alpha \
	385	$(bindir)/qemu-arm \
	386	$(bindir)/qemu-armeb \
	387	$(bindir)/qemu-cris \
	388	$(bindir)/qemu-m68k \
	389	$(bindir)/qemu-mips \
	390	$(bindir)/qemu-mipsel \
	391	$(bindir)/qemu-ppc \
	392	$(bindir)/qemu-ppc64 \
	393	$(bindir)/qemu-ppc64abi32 \
	394	$(bindir)/qemu-sh4 \
	395	$(bindir)/qemu-sh4eb \
	396	$(bindir)/qemu-sparc \
	397	$(bindir)/qemu-sparc64 \
	398	$(bindir)/qemu-sparc32plus \
	399	$(bindir)/qemu-img \
	400	$(bindir)/qemu-nbd \
	401	$(datadir)/bios.bin \
	402	$(datadir)/vgabios.bin \
	403	$(datadir)/vgabios-cirrus.bin \
	404	$(datadir)/ppc_rom.bin \
	405	$(datadir)/video.x \
	406	$(datadir)/openbios-sparc32 \
	407	$(datadir)/openbios-sparc64 \
	408	$(datadir)/openbios-ppc \
	409	$(datadir)/pxe-ne2k_pci.bin \
	410	$(datadir)/pxe-rtl8139.bin \
	411	$(datadir)/pxe-pcnet.bin \
	412	$(datadir)/pxe-e1000.bin \
	413	$(docdir)/qemu-doc.html \
	414	$(docdir)/qemu-tech.html \
	415	$(mandir)/man1/qemu.1 \
	416	$(mandir)/man1/qemu-img.1 \
	417	$(mandir)/man8/qemu-nbd.8
	418
	419	# Include automatically generated dependency files
	420	-include $(wildcard .d audio/.d slirp/.d block/.d)