]>
Commit | Line | Data |
---|---|---|
1 | // SPDX-License-Identifier: GPL-2.0 OR X11 | |
2 | /* | |
3 | * Copyright 2015 Boundary Devices, Inc. | |
4 | */ | |
5 | #include <dt-bindings/gpio/gpio.h> | |
6 | #include <dt-bindings/input/input.h> | |
7 | ||
8 | / { | |
9 | chosen { | |
10 | stdout-path = &uart2; | |
11 | }; | |
12 | ||
13 | memory@10000000 { | |
14 | device_type = "memory"; | |
15 | reg = <0x10000000 0x20000000>; | |
16 | }; | |
17 | ||
18 | regulators { | |
19 | compatible = "simple-bus"; | |
20 | #address-cells = <1>; | |
21 | #size-cells = <0>; | |
22 | ||
23 | reg_2p5v: regulator@0 { | |
24 | compatible = "regulator-fixed"; | |
25 | reg = <0>; | |
26 | regulator-name = "2P5V"; | |
27 | regulator-min-microvolt = <2500000>; | |
28 | regulator-max-microvolt = <2500000>; | |
29 | regulator-always-on; | |
30 | }; | |
31 | ||
32 | reg_3p3v: regulator@1 { | |
33 | compatible = "regulator-fixed"; | |
34 | reg = <1>; | |
35 | regulator-name = "3P3V"; | |
36 | regulator-min-microvolt = <3300000>; | |
37 | regulator-max-microvolt = <3300000>; | |
38 | regulator-always-on; | |
39 | }; | |
40 | ||
41 | reg_usb_otg_vbus: regulator@2 { | |
42 | compatible = "regulator-fixed"; | |
43 | reg = <2>; | |
44 | regulator-name = "usb_otg_vbus"; | |
45 | regulator-min-microvolt = <5000000>; | |
46 | regulator-max-microvolt = <5000000>; | |
47 | gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; | |
48 | enable-active-high; | |
49 | }; | |
50 | ||
51 | reg_wlan_vmmc: regulator@3 { | |
52 | compatible = "regulator-fixed"; | |
53 | reg = <3>; | |
54 | pinctrl-names = "default"; | |
55 | pinctrl-0 = <&pinctrl_wlan_vmmc>; | |
56 | regulator-name = "reg_wlan_vmmc"; | |
57 | regulator-min-microvolt = <1800000>; | |
58 | regulator-max-microvolt = <1800000>; | |
59 | gpio = <&gpio6 7 GPIO_ACTIVE_HIGH>; | |
60 | startup-delay-us = <70000>; | |
61 | enable-active-high; | |
62 | }; | |
63 | }; | |
64 | ||
65 | gpio-keys { | |
66 | compatible = "gpio-keys"; | |
67 | pinctrl-names = "default"; | |
68 | pinctrl-0 = <&pinctrl_gpio_keys>; | |
69 | ||
70 | home { | |
71 | label = "Home"; | |
72 | gpios = <&gpio7 13 IRQ_TYPE_LEVEL_LOW>; | |
73 | linux,code = <102>; | |
74 | }; | |
75 | ||
76 | back { | |
77 | label = "Back"; | |
78 | gpios = <&gpio4 5 IRQ_TYPE_LEVEL_LOW>; | |
79 | linux,code = <158>; | |
80 | }; | |
81 | }; | |
82 | ||
83 | leds { | |
84 | compatible = "gpio-leds"; | |
85 | pinctrl-names = "default"; | |
86 | pinctrl-0 = <&pinctrl_leds>; | |
87 | ||
88 | j14-pin1 { | |
89 | gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; | |
90 | retain-state-suspended; | |
91 | default-state = "off"; | |
92 | }; | |
93 | ||
94 | j14-pin3 { | |
95 | gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; | |
96 | retain-state-suspended; | |
97 | default-state = "off"; | |
98 | }; | |
99 | ||
100 | j14-pins8-9 { | |
101 | gpios = <&gpio3 29 GPIO_ACTIVE_LOW>; | |
102 | retain-state-suspended; | |
103 | default-state = "off"; | |
104 | }; | |
105 | ||
106 | j46-pin2 { | |
107 | gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; | |
108 | retain-state-suspended; | |
109 | default-state = "off"; | |
110 | }; | |
111 | ||
112 | j46-pin3 { | |
113 | gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; | |
114 | retain-state-suspended; | |
115 | default-state = "off"; | |
116 | }; | |
117 | }; | |
118 | ||
119 | backlight-lcd { | |
120 | compatible = "pwm-backlight"; | |
121 | pwms = <&pwm1 0 5000000>; | |
122 | brightness-levels = <0 4 8 16 32 64 128 255>; | |
123 | default-brightness-level = <7>; | |
124 | power-supply = <®_3p3v>; | |
125 | status = "okay"; | |
126 | }; | |
127 | ||
128 | backlight_lvds0: backlight-lvds0 { | |
129 | compatible = "pwm-backlight"; | |
130 | pwms = <&pwm4 0 5000000>; | |
131 | brightness-levels = <0 4 8 16 32 64 128 255>; | |
132 | default-brightness-level = <7>; | |
133 | power-supply = <®_3p3v>; | |
134 | status = "okay"; | |
135 | }; | |
136 | ||
137 | panel-lvds0 { | |
138 | compatible = "hannstar,hsd100pxn1"; | |
139 | backlight = <&backlight_lvds0>; | |
140 | ||
141 | port { | |
142 | panel_in_lvds0: endpoint { | |
143 | remote-endpoint = <&lvds0_out>; | |
144 | }; | |
145 | }; | |
146 | }; | |
147 | ||
148 | sound { | |
149 | compatible = "fsl,imx6dl-nit6xlite-sgtl5000", | |
150 | "fsl,imx-audio-sgtl5000"; | |
151 | model = "imx6dl-nit6xlite-sgtl5000"; | |
152 | ssi-controller = <&ssi1>; | |
153 | audio-codec = <&codec>; | |
154 | audio-routing = | |
155 | "MIC_IN", "Mic Jack", | |
156 | "Mic Jack", "Mic Bias", | |
157 | "Headphone Jack", "HP_OUT"; | |
158 | mux-int-port = <1>; | |
159 | mux-ext-port = <3>; | |
160 | }; | |
161 | }; | |
162 | ||
163 | &audmux { | |
164 | pinctrl-names = "default"; | |
165 | pinctrl-0 = <&pinctrl_audmux>; | |
166 | status = "okay"; | |
167 | }; | |
168 | ||
169 | &clks { | |
170 | assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, | |
171 | <&clks IMX6QDL_CLK_LDB_DI1_SEL>; | |
172 | assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, | |
173 | <&clks IMX6QDL_CLK_PLL3_USB_OTG>; | |
174 | }; | |
175 | ||
176 | &ecspi1 { | |
177 | cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; | |
178 | pinctrl-names = "default"; | |
179 | pinctrl-0 = <&pinctrl_ecspi1>; | |
180 | status = "okay"; | |
181 | ||
182 | flash: m25p80@0 { | |
183 | compatible = "microchip,sst25vf016b"; | |
184 | spi-max-frequency = <20000000>; | |
185 | reg = <0>; | |
186 | }; | |
187 | }; | |
188 | ||
189 | &fec { | |
190 | pinctrl-names = "default"; | |
191 | pinctrl-0 = <&pinctrl_enet>; | |
192 | phy-mode = "rgmii"; | |
193 | phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; | |
194 | txen-skew-ps = <0>; | |
195 | txc-skew-ps = <3000>; | |
196 | rxdv-skew-ps = <0>; | |
197 | rxc-skew-ps = <3000>; | |
198 | rxd0-skew-ps = <0>; | |
199 | rxd1-skew-ps = <0>; | |
200 | rxd2-skew-ps = <0>; | |
201 | rxd3-skew-ps = <0>; | |
202 | txd0-skew-ps = <0>; | |
203 | txd1-skew-ps = <0>; | |
204 | txd2-skew-ps = <0>; | |
205 | txd3-skew-ps = <0>; | |
206 | interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, | |
207 | <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; | |
208 | fsl,err006687-workaround-present; | |
209 | status = "okay"; | |
210 | }; | |
211 | ||
212 | &hdmi { | |
213 | ddc-i2c-bus = <&i2c2>; | |
214 | status = "okay"; | |
215 | }; | |
216 | ||
217 | &i2c1 { | |
218 | clock-frequency = <100000>; | |
219 | pinctrl-names = "default"; | |
220 | pinctrl-0 = <&pinctrl_i2c1>; | |
221 | status = "okay"; | |
222 | ||
223 | codec: sgtl5000@a { | |
224 | compatible = "fsl,sgtl5000"; | |
225 | pinctrl-names = "default"; | |
226 | pinctrl-0 = <&pinctrl_sgtl5000>; | |
227 | reg = <0x0a>; | |
228 | clocks = <&clks IMX6QDL_CLK_CKO>; | |
229 | VDDA-supply = <®_2p5v>; | |
230 | VDDIO-supply = <®_3p3v>; | |
231 | }; | |
232 | }; | |
233 | ||
234 | &i2c2 { | |
235 | clock-frequency = <100000>; | |
236 | pinctrl-names = "default"; | |
237 | pinctrl-0 = <&pinctrl_i2c2>; | |
238 | status = "okay"; | |
239 | }; | |
240 | ||
241 | &i2c3 { | |
242 | clock-frequency = <100000>; | |
243 | pinctrl-names = "default"; | |
244 | pinctrl-0 = <&pinctrl_i2c3>; | |
245 | status = "okay"; | |
246 | ||
247 | touchscreen@4 { | |
248 | compatible = "eeti,egalax_ts"; | |
249 | reg = <0x04>; | |
250 | interrupt-parent = <&gpio1>; | |
251 | interrupts = <9 IRQ_TYPE_EDGE_FALLING>; | |
252 | wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; | |
253 | }; | |
254 | ||
255 | touchscreen@38 { | |
256 | compatible = "edt,edt-ft5x06"; | |
257 | reg = <0x38>; | |
258 | interrupt-parent = <&gpio1>; | |
259 | interrupts = <9 IRQ_TYPE_EDGE_FALLING>; | |
260 | wakeup-source; | |
261 | }; | |
262 | ||
263 | rtc@6f { | |
264 | compatible = "isil,isl1208"; | |
265 | pinctrl-names = "default"; | |
266 | pinctrl-0 = <&pinctrl_rtc>; | |
267 | reg = <0x6f>; | |
268 | interrupts-extended = <&gpio2 26 IRQ_TYPE_LEVEL_LOW>; | |
269 | }; | |
270 | }; | |
271 | ||
272 | &iomuxc { | |
273 | pinctrl-names = "default"; | |
274 | pinctrl-0 = <&pinctrl_j10>; | |
275 | pinctrl-1 = <&pinctrl_j28>; | |
276 | ||
277 | imx6dl-nit6xlite { | |
278 | pinctrl_audmux: audmuxgrp { | |
279 | fsl,pins = < | |
280 | MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 | |
281 | MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 | |
282 | MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 | |
283 | MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 | |
284 | >; | |
285 | }; | |
286 | ||
287 | pinctrl_ecspi1: ecspi1grp { | |
288 | fsl,pins = < | |
289 | MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 | |
290 | MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 | |
291 | MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 | |
292 | MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 | |
293 | >; | |
294 | }; | |
295 | ||
296 | pinctrl_enet: enetgrp { | |
297 | fsl,pins = < | |
298 | MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 | |
299 | MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 | |
300 | MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0 | |
301 | MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0 | |
302 | MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0 | |
303 | MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0 | |
304 | MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0 | |
305 | MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0 | |
306 | MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 | |
307 | MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 | |
308 | MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 | |
309 | MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 | |
310 | MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 | |
311 | MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 | |
312 | MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 | |
313 | /* Phy reset */ | |
314 | MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x0f0b0 | |
315 | MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 | |
316 | MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 | |
317 | >; | |
318 | }; | |
319 | ||
320 | pinctrl_gpio_keys: gpio-keysgrp { | |
321 | fsl,pins = < | |
322 | /* Home Button: J14 pin 5 */ | |
323 | MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0 | |
324 | /* Back Button: J14 pin 7 */ | |
325 | MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 | |
326 | >; | |
327 | }; | |
328 | ||
329 | pinctrl_i2c1: i2c1grp { | |
330 | fsl,pins = < | |
331 | MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 | |
332 | MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 | |
333 | >; | |
334 | }; | |
335 | ||
336 | pinctrl_i2c2: i2c2grp { | |
337 | fsl,pins = < | |
338 | MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 | |
339 | MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 | |
340 | >; | |
341 | }; | |
342 | ||
343 | pinctrl_i2c3: i2c3grp { | |
344 | fsl,pins = < | |
345 | MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 | |
346 | MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1 | |
347 | /* Touch IRQ: J7 pin 4 */ | |
348 | MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 | |
349 | /* tcs2004 IRQ */ | |
350 | MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x1b0b0 | |
351 | /* tsc2004 reset */ | |
352 | MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x0b0b0 | |
353 | >; | |
354 | }; | |
355 | ||
356 | pinctrl_j10: j10grp { | |
357 | fsl,pins = < | |
358 | /* Broadcom WiFi module pins */ | |
359 | MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 | |
360 | MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 | |
361 | MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 | |
362 | MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0 | |
363 | MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x0b0b0 | |
364 | MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0 | |
365 | MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT 0x000b0 | |
366 | >; | |
367 | }; | |
368 | ||
369 | pinctrl_j28: j28grp { | |
370 | fsl,pins = < | |
371 | MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 | |
372 | >; | |
373 | }; | |
374 | ||
375 | pinctrl_leds: ledsgrp { | |
376 | fsl,pins = < | |
377 | MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x0b0b0 | |
378 | MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x0b0b0 | |
379 | MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x030b0 | |
380 | MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x0b0b0 | |
381 | MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0b0b0 | |
382 | >; | |
383 | }; | |
384 | ||
385 | pinctrl_pwm1: pwm1grp { | |
386 | fsl,pins = < | |
387 | MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 | |
388 | >; | |
389 | }; | |
390 | ||
391 | pinctrl_pwm3: pwm3grp { | |
392 | fsl,pins = < | |
393 | MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 | |
394 | >; | |
395 | }; | |
396 | ||
397 | pinctrl_pwm4: pwm4grp { | |
398 | fsl,pins = < | |
399 | MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 | |
400 | >; | |
401 | }; | |
402 | ||
403 | pinctrl_wlan_vmmc: wlan-vmmcgrp { | |
404 | fsl,pins = < | |
405 | MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x030b0 | |
406 | >; | |
407 | }; | |
408 | ||
409 | pinctrl_rtc: rtcgrp { | |
410 | fsl,pins = < | |
411 | MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x1b0b0 | |
412 | >; | |
413 | }; | |
414 | ||
415 | pinctrl_sgtl5000: sgtl5000grp { | |
416 | fsl,pins = < | |
417 | MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0 | |
418 | MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b0 | |
419 | >; | |
420 | }; | |
421 | ||
422 | pinctrl_uart1: uart1grp { | |
423 | fsl,pins = < | |
424 | MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 | |
425 | MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 | |
426 | >; | |
427 | }; | |
428 | ||
429 | pinctrl_uart2: uart2grp { | |
430 | fsl,pins = < | |
431 | MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 | |
432 | MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 | |
433 | >; | |
434 | }; | |
435 | ||
436 | pinctrl_uart3: uart3grp { | |
437 | fsl,pins = < | |
438 | MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 | |
439 | MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 | |
440 | MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1 | |
441 | MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1 | |
442 | >; | |
443 | }; | |
444 | ||
445 | pinctrl_usbotg: usbotggrp { | |
446 | fsl,pins = < | |
447 | MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 | |
448 | MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 | |
449 | /* power enable, high active */ | |
450 | MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x000b0 | |
451 | >; | |
452 | }; | |
453 | ||
454 | pinctrl_usdhc2: usdhc2grp { | |
455 | fsl,pins = < | |
456 | MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 | |
457 | MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 | |
458 | MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 | |
459 | MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 | |
460 | MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 | |
461 | MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 | |
462 | >; | |
463 | }; | |
464 | ||
465 | pinctrl_usdhc3: usdhc3grp { | |
466 | fsl,pins = < | |
467 | MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 | |
468 | MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 | |
469 | MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 | |
470 | MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 | |
471 | MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 | |
472 | MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 | |
473 | MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 | |
474 | >; | |
475 | }; | |
476 | }; | |
477 | }; | |
478 | ||
479 | &ldb { | |
480 | status = "okay"; | |
481 | ||
482 | lvds-channel@0 { | |
483 | status = "okay"; | |
484 | ||
485 | port@4 { | |
486 | reg = <4>; | |
487 | ||
488 | lvds0_out: endpoint { | |
489 | remote-endpoint = <&panel_in_lvds0>; | |
490 | }; | |
491 | }; | |
492 | }; | |
493 | }; | |
494 | ||
495 | &pcie { | |
496 | status = "okay"; | |
497 | }; | |
498 | ||
499 | &pwm1 { | |
500 | pinctrl-names = "default"; | |
501 | pinctrl-0 = <&pinctrl_pwm1>; | |
502 | status = "okay"; | |
503 | }; | |
504 | ||
505 | &pwm3 { | |
506 | pinctrl-names = "default"; | |
507 | pinctrl-0 = <&pinctrl_pwm3>; | |
508 | status = "okay"; | |
509 | }; | |
510 | ||
511 | &pwm4 { | |
512 | pinctrl-names = "default"; | |
513 | pinctrl-0 = <&pinctrl_pwm4>; | |
514 | status = "okay"; | |
515 | }; | |
516 | ||
517 | &ssi1 { | |
518 | status = "okay"; | |
519 | }; | |
520 | ||
521 | &uart1 { | |
522 | pinctrl-names = "default"; | |
523 | pinctrl-0 = <&pinctrl_uart1>; | |
524 | status = "okay"; | |
525 | }; | |
526 | ||
527 | &uart2 { | |
528 | pinctrl-names = "default"; | |
529 | pinctrl-0 = <&pinctrl_uart2>; | |
530 | status = "okay"; | |
531 | }; | |
532 | ||
533 | &uart3 { | |
534 | pinctrl-names = "default"; | |
535 | pinctrl-0 = <&pinctrl_uart3>; | |
536 | uart-has-rtscts; | |
537 | status = "okay"; | |
538 | }; | |
539 | ||
540 | &usbh1 { | |
541 | status = "okay"; | |
542 | }; | |
543 | ||
544 | &usbotg { | |
545 | vbus-supply = <®_usb_otg_vbus>; | |
546 | pinctrl-names = "default"; | |
547 | pinctrl-0 = <&pinctrl_usbotg>; | |
548 | disable-over-current; | |
549 | status = "okay"; | |
550 | }; | |
551 | ||
552 | &usdhc2 { | |
553 | pinctrl-names = "default"; | |
554 | pinctrl-0 = <&pinctrl_usdhc2>; | |
555 | bus-width = <4>; | |
556 | non-removable; | |
557 | vmmc-supply = <®_3p3v>; | |
558 | vqmmc-supply = <®_wlan_vmmc>; | |
559 | vqmmc-1-8-v; | |
560 | ocr-limit = <0x180>; /* 1.65v - 2.1v */ | |
561 | cap-power-off-card; | |
562 | keep-power-in-suspend; | |
563 | status = "okay"; | |
564 | }; | |
565 | ||
566 | &usdhc3 { | |
567 | pinctrl-names = "default"; | |
568 | pinctrl-0 = <&pinctrl_usdhc3>; | |
569 | cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; | |
570 | vmmc-supply = <®_3p3v>; | |
571 | status = "okay"; | |
572 | }; |