]>
Commit | Line | Data |
---|---|---|
1 | // SPDX-License-Identifier: GPL-2.0 | |
2 | #include <dt-bindings/iio/qcom,spmi-vadc.h> | |
3 | #include <dt-bindings/interrupt-controller/irq.h> | |
4 | #include <dt-bindings/spmi/spmi.h> | |
5 | ||
6 | &spmi_bus { | |
7 | ||
8 | pma8084_0: pma8084@0 { | |
9 | compatible = "qcom,pma8084", "qcom,spmi-pmic"; | |
10 | reg = <0x0 SPMI_USID>; | |
11 | #address-cells = <1>; | |
12 | #size-cells = <0>; | |
13 | ||
14 | rtc@6000 { | |
15 | compatible = "qcom,pm8941-rtc"; | |
16 | reg = <0x6000>, | |
17 | <0x6100>; | |
18 | reg-names = "rtc", "alarm"; | |
19 | interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; | |
20 | }; | |
21 | ||
22 | pwrkey@800 { | |
23 | compatible = "qcom,pm8941-pwrkey"; | |
24 | reg = <0x800>; | |
25 | interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; | |
26 | debounce = <15625>; | |
27 | bias-pull-up; | |
28 | }; | |
29 | ||
30 | pma8084_gpios: gpios@c000 { | |
31 | compatible = "qcom,pma8084-gpio", "qcom,spmi-gpio"; | |
32 | reg = <0xc000>; | |
33 | gpio-controller; | |
34 | gpio-ranges = <&pma8084_gpios 0 0 22>; | |
35 | #gpio-cells = <2>; | |
36 | interrupt-controller; | |
37 | #interrupt-cells = <2>; | |
38 | }; | |
39 | ||
40 | pma8084_mpps: mpps@a000 { | |
41 | compatible = "qcom,pma8084-mpp", "qcom,spmi-mpp"; | |
42 | reg = <0xa000>; | |
43 | gpio-controller; | |
44 | #gpio-cells = <2>; | |
45 | interrupts = <0 0xa0 0 IRQ_TYPE_NONE>, | |
46 | <0 0xa1 0 IRQ_TYPE_NONE>, | |
47 | <0 0xa2 0 IRQ_TYPE_NONE>, | |
48 | <0 0xa3 0 IRQ_TYPE_NONE>, | |
49 | <0 0xa4 0 IRQ_TYPE_NONE>, | |
50 | <0 0xa5 0 IRQ_TYPE_NONE>, | |
51 | <0 0xa6 0 IRQ_TYPE_NONE>, | |
52 | <0 0xa7 0 IRQ_TYPE_NONE>; | |
53 | }; | |
54 | ||
55 | pma8084_temp: temp-alarm@2400 { | |
56 | compatible = "qcom,spmi-temp-alarm"; | |
57 | reg = <0x2400>; | |
58 | interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>; | |
59 | #thermal-sensor-cells = <0>; | |
60 | io-channels = <&pma8084_vadc VADC_DIE_TEMP>; | |
61 | io-channel-names = "thermal"; | |
62 | }; | |
63 | ||
64 | pma8084_vadc: vadc@3100 { | |
65 | compatible = "qcom,spmi-vadc"; | |
66 | reg = <0x3100>; | |
67 | interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; | |
68 | #address-cells = <1>; | |
69 | #size-cells = <0>; | |
70 | #io-channel-cells = <1>; | |
71 | ||
72 | die_temp { | |
73 | reg = <VADC_DIE_TEMP>; | |
74 | }; | |
75 | ref_625mv { | |
76 | reg = <VADC_REF_625MV>; | |
77 | }; | |
78 | ref_1250v { | |
79 | reg = <VADC_REF_1250MV>; | |
80 | }; | |
81 | ref_buf_625mv { | |
82 | reg = <VADC_SPARE1>; | |
83 | }; | |
84 | ref_gnd { | |
85 | reg = <VADC_GND_REF>; | |
86 | }; | |
87 | ref_vdd { | |
88 | reg = <VADC_VDD_VADC>; | |
89 | }; | |
90 | }; | |
91 | }; | |
92 | ||
93 | pma8084_1: pma8084@1 { | |
94 | compatible = "qcom,pma8084", "qcom,spmi-pmic"; | |
95 | reg = <0x1 SPMI_USID>; | |
96 | #address-cells = <1>; | |
97 | #size-cells = <0>; | |
98 | }; | |
99 | }; |