]>
Commit | Line | Data |
---|---|---|
1 | /* | |
2 | * Device Tree Source for the Lager board | |
3 | * | |
4 | * Copyright (C) 2013-2014 Renesas Solutions Corp. | |
5 | * Copyright (C) 2014 Cogent Embedded, Inc. | |
6 | * | |
7 | * This file is licensed under the terms of the GNU General Public License | |
8 | * version 2. This program is licensed "as is" without any warranty of any | |
9 | * kind, whether express or implied. | |
10 | */ | |
11 | ||
12 | /* | |
13 | * SSI-AK4643 | |
14 | * | |
15 | * SW1: 1: AK4643 | |
16 | * 2: CN22 | |
17 | * 3: ADV7511 | |
18 | * | |
19 | * This command is required when Playback/Capture | |
20 | * | |
21 | * amixer set "LINEOUT Mixer DACL" on | |
22 | * amixer set "DVC Out" 100% | |
23 | * amixer set "DVC In" 100% | |
24 | * | |
25 | * You can use Mute | |
26 | * | |
27 | * amixer set "DVC Out Mute" on | |
28 | * amixer set "DVC In Mute" on | |
29 | * | |
30 | * You can use Volume Ramp | |
31 | * | |
32 | * amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps" | |
33 | * amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps" | |
34 | * amixer set "DVC Out Ramp" on | |
35 | * aplay xxx.wav & | |
36 | * amixer set "DVC Out" 80% // Volume Down | |
37 | * amixer set "DVC Out" 100% // Volume Up | |
38 | */ | |
39 | ||
40 | /dts-v1/; | |
41 | #include "r8a7790.dtsi" | |
42 | #include <dt-bindings/gpio/gpio.h> | |
43 | #include <dt-bindings/input/input.h> | |
44 | ||
45 | / { | |
46 | model = "Lager"; | |
47 | compatible = "renesas,lager", "renesas,r8a7790"; | |
48 | ||
49 | aliases { | |
50 | serial0 = &scif0; | |
51 | serial1 = &scifa1; | |
52 | }; | |
53 | ||
54 | chosen { | |
55 | bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; | |
56 | stdout-path = "serial0:115200n8"; | |
57 | }; | |
58 | ||
59 | memory@40000000 { | |
60 | device_type = "memory"; | |
61 | reg = <0 0x40000000 0 0x40000000>; | |
62 | }; | |
63 | ||
64 | memory@140000000 { | |
65 | device_type = "memory"; | |
66 | reg = <1 0x40000000 0 0xc0000000>; | |
67 | }; | |
68 | ||
69 | lbsc { | |
70 | #address-cells = <1>; | |
71 | #size-cells = <1>; | |
72 | }; | |
73 | ||
74 | keyboard { | |
75 | compatible = "gpio-keys"; | |
76 | ||
77 | button@1 { | |
78 | linux,code = <KEY_1>; | |
79 | label = "SW2-1"; | |
80 | wakeup-source; | |
81 | debounce-interval = <20>; | |
82 | gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; | |
83 | }; | |
84 | button@2 { | |
85 | linux,code = <KEY_2>; | |
86 | label = "SW2-2"; | |
87 | wakeup-source; | |
88 | debounce-interval = <20>; | |
89 | gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; | |
90 | }; | |
91 | button@3 { | |
92 | linux,code = <KEY_3>; | |
93 | label = "SW2-3"; | |
94 | wakeup-source; | |
95 | debounce-interval = <20>; | |
96 | gpios = <&gpio1 26 GPIO_ACTIVE_LOW>; | |
97 | }; | |
98 | button@4 { | |
99 | linux,code = <KEY_4>; | |
100 | label = "SW2-4"; | |
101 | wakeup-source; | |
102 | debounce-interval = <20>; | |
103 | gpios = <&gpio1 28 GPIO_ACTIVE_LOW>; | |
104 | }; | |
105 | }; | |
106 | ||
107 | leds { | |
108 | compatible = "gpio-leds"; | |
109 | led6 { | |
110 | gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>; | |
111 | }; | |
112 | led7 { | |
113 | gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>; | |
114 | }; | |
115 | led8 { | |
116 | gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>; | |
117 | }; | |
118 | }; | |
119 | ||
120 | fixedregulator3v3: fixedregulator@0 { | |
121 | compatible = "regulator-fixed"; | |
122 | regulator-name = "fixed-3.3V"; | |
123 | regulator-min-microvolt = <3300000>; | |
124 | regulator-max-microvolt = <3300000>; | |
125 | regulator-boot-on; | |
126 | regulator-always-on; | |
127 | }; | |
128 | ||
129 | vcc_sdhi0: regulator@1 { | |
130 | compatible = "regulator-fixed"; | |
131 | ||
132 | regulator-name = "SDHI0 Vcc"; | |
133 | regulator-min-microvolt = <3300000>; | |
134 | regulator-max-microvolt = <3300000>; | |
135 | ||
136 | gpio = <&gpio5 24 GPIO_ACTIVE_HIGH>; | |
137 | enable-active-high; | |
138 | }; | |
139 | ||
140 | vccq_sdhi0: regulator@2 { | |
141 | compatible = "regulator-gpio"; | |
142 | ||
143 | regulator-name = "SDHI0 VccQ"; | |
144 | regulator-min-microvolt = <1800000>; | |
145 | regulator-max-microvolt = <3300000>; | |
146 | ||
147 | gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>; | |
148 | gpios-states = <1>; | |
149 | states = <3300000 1 | |
150 | 1800000 0>; | |
151 | }; | |
152 | ||
153 | vcc_sdhi2: regulator@3 { | |
154 | compatible = "regulator-fixed"; | |
155 | ||
156 | regulator-name = "SDHI2 Vcc"; | |
157 | regulator-min-microvolt = <3300000>; | |
158 | regulator-max-microvolt = <3300000>; | |
159 | ||
160 | gpio = <&gpio5 25 GPIO_ACTIVE_HIGH>; | |
161 | enable-active-high; | |
162 | }; | |
163 | ||
164 | vccq_sdhi2: regulator@4 { | |
165 | compatible = "regulator-gpio"; | |
166 | ||
167 | regulator-name = "SDHI2 VccQ"; | |
168 | regulator-min-microvolt = <1800000>; | |
169 | regulator-max-microvolt = <3300000>; | |
170 | ||
171 | gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>; | |
172 | gpios-states = <1>; | |
173 | states = <3300000 1 | |
174 | 1800000 0>; | |
175 | }; | |
176 | ||
177 | audio_clock: clock { | |
178 | compatible = "fixed-clock"; | |
179 | #clock-cells = <0>; | |
180 | clock-frequency = <11289600>; | |
181 | clock-output-names = "audio_clock"; | |
182 | }; | |
183 | ||
184 | rsnd_ak4643: sound { | |
185 | compatible = "simple-audio-card"; | |
186 | ||
187 | simple-audio-card,format = "left_j"; | |
188 | simple-audio-card,bitclock-master = <&sndcodec>; | |
189 | simple-audio-card,frame-master = <&sndcodec>; | |
190 | ||
191 | sndcpu: simple-audio-card,cpu { | |
192 | sound-dai = <&rcar_sound>; | |
193 | }; | |
194 | ||
195 | sndcodec: simple-audio-card,codec { | |
196 | sound-dai = <&ak4643>; | |
197 | clocks = <&audio_clock>; | |
198 | }; | |
199 | }; | |
200 | ||
201 | vga-encoder { | |
202 | compatible = "adi,adv7123"; | |
203 | ||
204 | ports { | |
205 | #address-cells = <1>; | |
206 | #size-cells = <0>; | |
207 | ||
208 | port@0 { | |
209 | reg = <0>; | |
210 | adv7123_in: endpoint { | |
211 | remote-endpoint = <&du_out_rgb>; | |
212 | }; | |
213 | }; | |
214 | port@1 { | |
215 | reg = <1>; | |
216 | adv7123_out: endpoint { | |
217 | remote-endpoint = <&vga_in>; | |
218 | }; | |
219 | }; | |
220 | }; | |
221 | }; | |
222 | ||
223 | vga { | |
224 | compatible = "vga-connector"; | |
225 | ||
226 | port { | |
227 | vga_in: endpoint { | |
228 | remote-endpoint = <&adv7123_out>; | |
229 | }; | |
230 | }; | |
231 | }; | |
232 | ||
233 | hdmi-out { | |
234 | compatible = "hdmi-connector"; | |
235 | type = "a"; | |
236 | ||
237 | port { | |
238 | hdmi_con: endpoint { | |
239 | remote-endpoint = <&adv7511_out>; | |
240 | }; | |
241 | }; | |
242 | }; | |
243 | ||
244 | x2_clk: x2-clock { | |
245 | compatible = "fixed-clock"; | |
246 | #clock-cells = <0>; | |
247 | clock-frequency = <148500000>; | |
248 | }; | |
249 | ||
250 | x13_clk: x13-clock { | |
251 | compatible = "fixed-clock"; | |
252 | #clock-cells = <0>; | |
253 | clock-frequency = <148500000>; | |
254 | }; | |
255 | }; | |
256 | ||
257 | &du { | |
258 | pinctrl-0 = <&du_pins>; | |
259 | pinctrl-names = "default"; | |
260 | status = "okay"; | |
261 | ||
262 | clocks = <&mstp7_clks R8A7790_CLK_DU0>, | |
263 | <&mstp7_clks R8A7790_CLK_DU1>, | |
264 | <&mstp7_clks R8A7790_CLK_DU2>, | |
265 | <&mstp7_clks R8A7790_CLK_LVDS0>, | |
266 | <&mstp7_clks R8A7790_CLK_LVDS1>, | |
267 | <&x13_clk>, <&x2_clk>; | |
268 | clock-names = "du.0", "du.1", "du.2", "lvds.0", "lvds.1", | |
269 | "dclkin.0", "dclkin.1"; | |
270 | ||
271 | ports { | |
272 | port@0 { | |
273 | endpoint { | |
274 | remote-endpoint = <&adv7123_in>; | |
275 | }; | |
276 | }; | |
277 | port@1 { | |
278 | endpoint { | |
279 | remote-endpoint = <&adv7511_in>; | |
280 | }; | |
281 | }; | |
282 | port@2 { | |
283 | lvds_connector: endpoint { | |
284 | }; | |
285 | }; | |
286 | }; | |
287 | }; | |
288 | ||
289 | &extal_clk { | |
290 | clock-frequency = <20000000>; | |
291 | }; | |
292 | ||
293 | &pfc { | |
294 | du_pins: du { | |
295 | renesas,groups = "du_rgb666", "du_sync_1", "du_clk_out_0"; | |
296 | renesas,function = "du"; | |
297 | }; | |
298 | ||
299 | scif0_pins: serial0 { | |
300 | renesas,groups = "scif0_data"; | |
301 | renesas,function = "scif0"; | |
302 | }; | |
303 | ||
304 | ether_pins: ether { | |
305 | renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; | |
306 | renesas,function = "eth"; | |
307 | }; | |
308 | ||
309 | phy1_pins: phy1 { | |
310 | renesas,groups = "intc_irq0"; | |
311 | renesas,function = "intc"; | |
312 | }; | |
313 | ||
314 | scifa1_pins: serial1 { | |
315 | renesas,groups = "scifa1_data"; | |
316 | renesas,function = "scifa1"; | |
317 | }; | |
318 | ||
319 | sdhi0_pins: sd0 { | |
320 | renesas,groups = "sdhi0_data4", "sdhi0_ctrl"; | |
321 | renesas,function = "sdhi0"; | |
322 | }; | |
323 | ||
324 | sdhi2_pins: sd2 { | |
325 | renesas,groups = "sdhi2_data4", "sdhi2_ctrl"; | |
326 | renesas,function = "sdhi2"; | |
327 | }; | |
328 | ||
329 | mmc1_pins: mmc1 { | |
330 | renesas,groups = "mmc1_data8", "mmc1_ctrl"; | |
331 | renesas,function = "mmc1"; | |
332 | }; | |
333 | ||
334 | qspi_pins: spi0 { | |
335 | renesas,groups = "qspi_ctrl", "qspi_data4"; | |
336 | renesas,function = "qspi"; | |
337 | }; | |
338 | ||
339 | msiof1_pins: spi2 { | |
340 | renesas,groups = "msiof1_clk", "msiof1_sync", "msiof1_rx", | |
341 | "msiof1_tx"; | |
342 | renesas,function = "msiof1"; | |
343 | }; | |
344 | ||
345 | iic0_pins: iic0 { | |
346 | renesas,groups = "iic0"; | |
347 | renesas,function = "iic0"; | |
348 | }; | |
349 | ||
350 | iic1_pins: iic1 { | |
351 | renesas,groups = "iic1"; | |
352 | renesas,function = "iic1"; | |
353 | }; | |
354 | ||
355 | iic2_pins: iic2 { | |
356 | renesas,groups = "iic2"; | |
357 | renesas,function = "iic2"; | |
358 | }; | |
359 | ||
360 | iic3_pins: iic3 { | |
361 | renesas,groups = "iic3"; | |
362 | renesas,function = "iic3"; | |
363 | }; | |
364 | ||
365 | hsusb_pins: hsusb { | |
366 | renesas,groups = "usb0_ovc_vbus"; | |
367 | renesas,function = "usb0"; | |
368 | }; | |
369 | ||
370 | usb0_pins: usb0 { | |
371 | renesas,groups = "usb0"; | |
372 | renesas,function = "usb0"; | |
373 | }; | |
374 | ||
375 | usb1_pins: usb1 { | |
376 | renesas,groups = "usb1"; | |
377 | renesas,function = "usb1"; | |
378 | }; | |
379 | ||
380 | usb2_pins: usb2 { | |
381 | renesas,groups = "usb2"; | |
382 | renesas,function = "usb2"; | |
383 | }; | |
384 | ||
385 | vin1_pins: vin { | |
386 | renesas,groups = "vin1_data8", "vin1_clk"; | |
387 | renesas,function = "vin1"; | |
388 | }; | |
389 | ||
390 | sound_pins: sound { | |
391 | renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data"; | |
392 | renesas,function = "ssi"; | |
393 | }; | |
394 | ||
395 | sound_clk_pins: sound_clk { | |
396 | renesas,groups = "audio_clk_a"; | |
397 | renesas,function = "audio_clk"; | |
398 | }; | |
399 | }; | |
400 | ||
401 | ðer { | |
402 | pinctrl-0 = <ðer_pins &phy1_pins>; | |
403 | pinctrl-names = "default"; | |
404 | ||
405 | phy-handle = <&phy1>; | |
406 | renesas,ether-link-active-low; | |
407 | status = "okay"; | |
408 | ||
409 | phy1: ethernet-phy@1 { | |
410 | reg = <1>; | |
411 | interrupt-parent = <&irqc0>; | |
412 | interrupts = <0 IRQ_TYPE_LEVEL_LOW>; | |
413 | micrel,led-mode = <1>; | |
414 | }; | |
415 | }; | |
416 | ||
417 | &cmt0 { | |
418 | status = "okay"; | |
419 | }; | |
420 | ||
421 | &mmcif1 { | |
422 | pinctrl-0 = <&mmc1_pins>; | |
423 | pinctrl-names = "default"; | |
424 | ||
425 | vmmc-supply = <&fixedregulator3v3>; | |
426 | bus-width = <8>; | |
427 | non-removable; | |
428 | status = "okay"; | |
429 | }; | |
430 | ||
431 | &sata1 { | |
432 | status = "okay"; | |
433 | }; | |
434 | ||
435 | &qspi { | |
436 | pinctrl-0 = <&qspi_pins>; | |
437 | pinctrl-names = "default"; | |
438 | ||
439 | status = "okay"; | |
440 | ||
441 | flash: flash@0 { | |
442 | compatible = "spansion,s25fl512s", "jedec,spi-nor"; | |
443 | reg = <0>; | |
444 | spi-max-frequency = <30000000>; | |
445 | spi-tx-bus-width = <4>; | |
446 | spi-rx-bus-width = <4>; | |
447 | spi-cpha; | |
448 | spi-cpol; | |
449 | m25p,fast-read; | |
450 | ||
451 | partitions { | |
452 | compatible = "fixed-partitions"; | |
453 | #address-cells = <1>; | |
454 | #size-cells = <1>; | |
455 | ||
456 | partition@0 { | |
457 | label = "loader"; | |
458 | reg = <0x00000000 0x00040000>; | |
459 | read-only; | |
460 | }; | |
461 | partition@40000 { | |
462 | label = "user"; | |
463 | reg = <0x00040000 0x00400000>; | |
464 | read-only; | |
465 | }; | |
466 | partition@440000 { | |
467 | label = "flash"; | |
468 | reg = <0x00440000 0x03bc0000>; | |
469 | }; | |
470 | }; | |
471 | }; | |
472 | }; | |
473 | ||
474 | &scif0 { | |
475 | pinctrl-0 = <&scif0_pins>; | |
476 | pinctrl-names = "default"; | |
477 | ||
478 | status = "okay"; | |
479 | }; | |
480 | ||
481 | &scifa1 { | |
482 | pinctrl-0 = <&scifa1_pins>; | |
483 | pinctrl-names = "default"; | |
484 | ||
485 | status = "okay"; | |
486 | }; | |
487 | ||
488 | &msiof1 { | |
489 | pinctrl-0 = <&msiof1_pins>; | |
490 | pinctrl-names = "default"; | |
491 | ||
492 | status = "okay"; | |
493 | ||
494 | pmic: pmic@0 { | |
495 | compatible = "renesas,r2a11302ft"; | |
496 | reg = <0>; | |
497 | spi-max-frequency = <6000000>; | |
498 | spi-cpol; | |
499 | spi-cpha; | |
500 | }; | |
501 | }; | |
502 | ||
503 | &sdhi0 { | |
504 | pinctrl-0 = <&sdhi0_pins>; | |
505 | pinctrl-names = "default"; | |
506 | ||
507 | vmmc-supply = <&vcc_sdhi0>; | |
508 | vqmmc-supply = <&vccq_sdhi0>; | |
509 | cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>; | |
510 | status = "okay"; | |
511 | }; | |
512 | ||
513 | &sdhi2 { | |
514 | pinctrl-0 = <&sdhi2_pins>; | |
515 | pinctrl-names = "default"; | |
516 | ||
517 | vmmc-supply = <&vcc_sdhi2>; | |
518 | vqmmc-supply = <&vccq_sdhi2>; | |
519 | cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>; | |
520 | status = "okay"; | |
521 | }; | |
522 | ||
523 | &cpu0 { | |
524 | cpu0-supply = <&vdd_dvfs>; | |
525 | }; | |
526 | ||
527 | &iic0 { | |
528 | status = "okay"; | |
529 | pinctrl-0 = <&iic0_pins>; | |
530 | pinctrl-names = "default"; | |
531 | }; | |
532 | ||
533 | &iic1 { | |
534 | status = "okay"; | |
535 | pinctrl-0 = <&iic1_pins>; | |
536 | pinctrl-names = "default"; | |
537 | }; | |
538 | ||
539 | &iic2 { | |
540 | status = "okay"; | |
541 | pinctrl-0 = <&iic2_pins>; | |
542 | pinctrl-names = "default"; | |
543 | ||
544 | clock-frequency = <100000>; | |
545 | ||
546 | ak4643: codec@12 { | |
547 | compatible = "asahi-kasei,ak4643"; | |
548 | #sound-dai-cells = <0>; | |
549 | reg = <0x12>; | |
550 | }; | |
551 | ||
552 | composite-in@20 { | |
553 | compatible = "adi,adv7180"; | |
554 | reg = <0x20>; | |
555 | remote = <&vin1>; | |
556 | ||
557 | port { | |
558 | adv7180: endpoint { | |
559 | bus-width = <8>; | |
560 | remote-endpoint = <&vin1ep0>; | |
561 | }; | |
562 | }; | |
563 | }; | |
564 | ||
565 | hdmi@39 { | |
566 | compatible = "adi,adv7511w"; | |
567 | reg = <0x39>; | |
568 | interrupt-parent = <&gpio1>; | |
569 | interrupts = <15 IRQ_TYPE_LEVEL_LOW>; | |
570 | ||
571 | adi,input-depth = <8>; | |
572 | adi,input-colorspace = "rgb"; | |
573 | adi,input-clock = "1x"; | |
574 | adi,input-style = <1>; | |
575 | adi,input-justification = "evenly"; | |
576 | ||
577 | ports { | |
578 | #address-cells = <1>; | |
579 | #size-cells = <0>; | |
580 | ||
581 | port@0 { | |
582 | reg = <0>; | |
583 | adv7511_in: endpoint { | |
584 | remote-endpoint = <&du_out_lvds0>; | |
585 | }; | |
586 | }; | |
587 | ||
588 | port@1 { | |
589 | reg = <1>; | |
590 | adv7511_out: endpoint { | |
591 | remote-endpoint = <&hdmi_con>; | |
592 | }; | |
593 | }; | |
594 | }; | |
595 | }; | |
596 | }; | |
597 | ||
598 | &iic3 { | |
599 | pinctrl-names = "default"; | |
600 | pinctrl-0 = <&iic3_pins>; | |
601 | status = "okay"; | |
602 | ||
603 | pmic@58 { | |
604 | compatible = "dlg,da9063"; | |
605 | reg = <0x58>; | |
606 | interrupt-parent = <&irqc0>; | |
607 | interrupts = <2 IRQ_TYPE_LEVEL_LOW>; | |
608 | interrupt-controller; | |
609 | ||
610 | rtc { | |
611 | compatible = "dlg,da9063-rtc"; | |
612 | }; | |
613 | ||
614 | wdt { | |
615 | compatible = "dlg,da9063-watchdog"; | |
616 | }; | |
617 | }; | |
618 | ||
619 | vdd_dvfs: regulator@68 { | |
620 | compatible = "dlg,da9210"; | |
621 | reg = <0x68>; | |
622 | interrupt-parent = <&irqc0>; | |
623 | interrupts = <2 IRQ_TYPE_LEVEL_LOW>; | |
624 | ||
625 | regulator-min-microvolt = <1000000>; | |
626 | regulator-max-microvolt = <1000000>; | |
627 | regulator-boot-on; | |
628 | regulator-always-on; | |
629 | }; | |
630 | }; | |
631 | ||
632 | &pci0 { | |
633 | status = "okay"; | |
634 | pinctrl-0 = <&usb0_pins>; | |
635 | pinctrl-names = "default"; | |
636 | }; | |
637 | ||
638 | &pci1 { | |
639 | status = "okay"; | |
640 | pinctrl-0 = <&usb1_pins>; | |
641 | pinctrl-names = "default"; | |
642 | }; | |
643 | ||
644 | &xhci { | |
645 | status = "okay"; | |
646 | pinctrl-0 = <&usb2_pins>; | |
647 | pinctrl-names = "default"; | |
648 | }; | |
649 | ||
650 | &pci2 { | |
651 | status = "okay"; | |
652 | pinctrl-0 = <&usb2_pins>; | |
653 | pinctrl-names = "default"; | |
654 | }; | |
655 | ||
656 | &hsusb { | |
657 | status = "okay"; | |
658 | pinctrl-0 = <&hsusb_pins>; | |
659 | pinctrl-names = "default"; | |
660 | renesas,enable-gpio = <&gpio5 18 GPIO_ACTIVE_HIGH>; | |
661 | }; | |
662 | ||
663 | &usbphy { | |
664 | status = "okay"; | |
665 | }; | |
666 | ||
667 | /* composite video input */ | |
668 | &vin1 { | |
669 | pinctrl-0 = <&vin1_pins>; | |
670 | pinctrl-names = "default"; | |
671 | ||
672 | status = "okay"; | |
673 | ||
674 | port { | |
675 | #address-cells = <1>; | |
676 | #size-cells = <0>; | |
677 | ||
678 | vin1ep0: endpoint { | |
679 | remote-endpoint = <&adv7180>; | |
680 | bus-width = <8>; | |
681 | }; | |
682 | }; | |
683 | }; | |
684 | ||
685 | &rcar_sound { | |
686 | pinctrl-0 = <&sound_pins &sound_clk_pins>; | |
687 | pinctrl-names = "default"; | |
688 | ||
689 | /* Single DAI */ | |
690 | #sound-dai-cells = <0>; | |
691 | ||
692 | status = "okay"; | |
693 | ||
694 | rcar_sound,dai { | |
695 | dai0 { | |
696 | playback = <&ssi0 &src2 &dvc0>; | |
697 | capture = <&ssi1 &src3 &dvc1>; | |
698 | }; | |
699 | }; | |
700 | }; | |
701 | ||
702 | &ssi1 { | |
703 | shared-pin; | |
704 | }; |