]>
Commit | Line | Data |
---|---|---|
1 | // SPDX-License-Identifier: GPL-2.0-only | |
2 | /* | |
3 | * Hardware definitions for Palm Treo smartphones | |
4 | * | |
5 | * currently supported: | |
6 | * Palm Treo 680 (GSM) | |
7 | * Palm Centro 685 (GSM) | |
8 | * | |
9 | * Author: Tomas Cech <sleep_walker@suse.cz> | |
10 | * | |
11 | * (find more info at www.hackndev.com) | |
12 | */ | |
13 | ||
14 | #include <linux/platform_device.h> | |
15 | #include <linux/delay.h> | |
16 | #include <linux/irq.h> | |
17 | #include <linux/gpio_keys.h> | |
18 | #include <linux/input.h> | |
19 | #include <linux/memblock.h> | |
20 | #include <linux/pda_power.h> | |
21 | #include <linux/pwm_backlight.h> | |
22 | #include <linux/gpio.h> | |
23 | #include <linux/power_supply.h> | |
24 | #include <linux/w1-gpio.h> | |
25 | ||
26 | #include <asm/mach-types.h> | |
27 | #include <asm/mach/arch.h> | |
28 | #include <asm/mach/map.h> | |
29 | ||
30 | #include "pxa27x.h" | |
31 | #include "pxa27x-udc.h" | |
32 | #include <mach/audio.h> | |
33 | #include "palmtreo.h" | |
34 | #include <linux/platform_data/mmc-pxamci.h> | |
35 | #include <linux/platform_data/video-pxafb.h> | |
36 | #include <linux/platform_data/irda-pxaficp.h> | |
37 | #include <linux/platform_data/keypad-pxa27x.h> | |
38 | #include "udc.h" | |
39 | #include <linux/platform_data/usb-ohci-pxa27x.h> | |
40 | #include <mach/pxa2xx-regs.h> | |
41 | #include <linux/platform_data/asoc-palm27x.h> | |
42 | #include <linux/platform_data/media/camera-pxa.h> | |
43 | #include "palm27x.h" | |
44 | ||
45 | #include <sound/pxa2xx-lib.h> | |
46 | ||
47 | #include "generic.h" | |
48 | #include "devices.h" | |
49 | ||
50 | /****************************************************************************** | |
51 | * Pin configuration | |
52 | ******************************************************************************/ | |
53 | static unsigned long treo_pin_config[] __initdata = { | |
54 | /* MMC */ | |
55 | GPIO32_MMC_CLK, | |
56 | GPIO92_MMC_DAT_0, | |
57 | GPIO109_MMC_DAT_1, | |
58 | GPIO110_MMC_DAT_2, | |
59 | GPIO111_MMC_DAT_3, | |
60 | GPIO112_MMC_CMD, | |
61 | GPIO113_GPIO, /* SD detect */ | |
62 | ||
63 | /* AC97 */ | |
64 | GPIO28_AC97_BITCLK, | |
65 | GPIO29_AC97_SDATA_IN_0, | |
66 | GPIO30_AC97_SDATA_OUT, | |
67 | GPIO31_AC97_SYNC, | |
68 | GPIO89_AC97_SYSCLK, | |
69 | GPIO95_AC97_nRESET, | |
70 | ||
71 | /* IrDA */ | |
72 | GPIO46_FICP_RXD, | |
73 | GPIO47_FICP_TXD, | |
74 | ||
75 | /* PWM */ | |
76 | GPIO16_PWM0_OUT, | |
77 | ||
78 | /* USB */ | |
79 | GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH, /* usb detect */ | |
80 | ||
81 | /* MATRIX KEYPAD */ | |
82 | GPIO101_KP_MKIN_1, | |
83 | GPIO102_KP_MKIN_2, | |
84 | GPIO97_KP_MKIN_3, | |
85 | GPIO98_KP_MKIN_4, | |
86 | GPIO91_KP_MKIN_6, | |
87 | GPIO13_KP_MKIN_7, | |
88 | GPIO103_KP_MKOUT_0 | MFP_LPM_DRIVE_HIGH, | |
89 | GPIO104_KP_MKOUT_1, | |
90 | GPIO105_KP_MKOUT_2, | |
91 | GPIO106_KP_MKOUT_3, | |
92 | GPIO107_KP_MKOUT_4, | |
93 | GPIO108_KP_MKOUT_5, | |
94 | GPIO96_KP_MKOUT_6, | |
95 | GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH, /* Hotsync button */ | |
96 | ||
97 | /* Quick Capture Interface */ | |
98 | GPIO84_CIF_FV, | |
99 | GPIO85_CIF_LV, | |
100 | GPIO53_CIF_MCLK, | |
101 | GPIO54_CIF_PCLK, | |
102 | GPIO81_CIF_DD_0, | |
103 | GPIO55_CIF_DD_1, | |
104 | GPIO51_CIF_DD_2, | |
105 | GPIO50_CIF_DD_3, | |
106 | GPIO52_CIF_DD_4, | |
107 | GPIO48_CIF_DD_5, | |
108 | GPIO17_CIF_DD_6, | |
109 | GPIO12_CIF_DD_7, | |
110 | ||
111 | /* I2C */ | |
112 | GPIO117_I2C_SCL, | |
113 | GPIO118_I2C_SDA, | |
114 | ||
115 | /* GSM */ | |
116 | GPIO14_GPIO | WAKEUP_ON_EDGE_BOTH, /* GSM host wake up */ | |
117 | GPIO34_FFUART_RXD, | |
118 | GPIO35_FFUART_CTS, | |
119 | GPIO39_FFUART_TXD, | |
120 | GPIO41_FFUART_RTS, | |
121 | ||
122 | /* MISC. */ | |
123 | GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH, /* external power detect */ | |
124 | GPIO15_GPIO | WAKEUP_ON_EDGE_BOTH, /* silent switch */ | |
125 | GPIO116_GPIO, /* headphone detect */ | |
126 | GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH, /* bluetooth host wake up */ | |
127 | }; | |
128 | ||
129 | #ifdef CONFIG_MACH_TREO680 | |
130 | static unsigned long treo680_pin_config[] __initdata = { | |
131 | GPIO33_GPIO, /* SD read only */ | |
132 | ||
133 | /* MATRIX KEYPAD - different wake up source */ | |
134 | GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH, | |
135 | GPIO99_KP_MKIN_5, | |
136 | ||
137 | /* LCD... L_BIAS alt fn not configured on Treo680; is GPIO instead */ | |
138 | GPIOxx_LCD_16BPP, | |
139 | GPIO74_LCD_FCLK, | |
140 | GPIO75_LCD_LCLK, | |
141 | GPIO76_LCD_PCLK, | |
142 | }; | |
143 | #endif /* CONFIG_MACH_TREO680 */ | |
144 | ||
145 | #ifdef CONFIG_MACH_CENTRO | |
146 | static unsigned long centro685_pin_config[] __initdata = { | |
147 | /* Bluetooth attached to BT UART*/ | |
148 | MFP_CFG_OUT(GPIO80, AF0, DRIVE_LOW), /* power: LOW = off */ | |
149 | GPIO42_BTUART_RXD, | |
150 | GPIO43_BTUART_TXD, | |
151 | GPIO44_BTUART_CTS, | |
152 | GPIO45_BTUART_RTS, | |
153 | ||
154 | /* MATRIX KEYPAD - different wake up source */ | |
155 | GPIO100_KP_MKIN_0, | |
156 | GPIO99_KP_MKIN_5 | WAKEUP_ON_LEVEL_HIGH, | |
157 | ||
158 | /* LCD */ | |
159 | GPIOxx_LCD_TFT_16BPP, | |
160 | }; | |
161 | #endif /* CONFIG_MACH_CENTRO */ | |
162 | ||
163 | /****************************************************************************** | |
164 | * GPIO keyboard | |
165 | ******************************************************************************/ | |
166 | #if IS_ENABLED(CONFIG_KEYBOARD_PXA27x) | |
167 | static const unsigned int treo680_matrix_keys[] = { | |
168 | KEY(0, 0, KEY_F8), /* Red/Off/Power */ | |
169 | KEY(0, 1, KEY_LEFT), | |
170 | KEY(0, 2, KEY_LEFTCTRL), /* Alternate */ | |
171 | KEY(0, 3, KEY_L), | |
172 | KEY(0, 4, KEY_A), | |
173 | KEY(0, 5, KEY_Q), | |
174 | KEY(0, 6, KEY_P), | |
175 | ||
176 | KEY(1, 0, KEY_RIGHTCTRL), /* Menu */ | |
177 | KEY(1, 1, KEY_RIGHT), | |
178 | KEY(1, 2, KEY_LEFTSHIFT), /* Left shift */ | |
179 | KEY(1, 3, KEY_Z), | |
180 | KEY(1, 4, KEY_S), | |
181 | KEY(1, 5, KEY_W), | |
182 | ||
183 | KEY(2, 0, KEY_F1), /* Phone */ | |
184 | KEY(2, 1, KEY_UP), | |
185 | KEY(2, 2, KEY_0), | |
186 | KEY(2, 3, KEY_X), | |
187 | KEY(2, 4, KEY_D), | |
188 | KEY(2, 5, KEY_E), | |
189 | ||
190 | KEY(3, 0, KEY_F10), /* Calendar */ | |
191 | KEY(3, 1, KEY_DOWN), | |
192 | KEY(3, 2, KEY_SPACE), | |
193 | KEY(3, 3, KEY_C), | |
194 | KEY(3, 4, KEY_F), | |
195 | KEY(3, 5, KEY_R), | |
196 | ||
197 | KEY(4, 0, KEY_F12), /* Mail */ | |
198 | KEY(4, 1, KEY_KPENTER), | |
199 | KEY(4, 2, KEY_RIGHTALT), /* Alt */ | |
200 | KEY(4, 3, KEY_V), | |
201 | KEY(4, 4, KEY_G), | |
202 | KEY(4, 5, KEY_T), | |
203 | ||
204 | KEY(5, 0, KEY_F9), /* Home */ | |
205 | KEY(5, 1, KEY_PAGEUP), /* Side up */ | |
206 | KEY(5, 2, KEY_DOT), | |
207 | KEY(5, 3, KEY_B), | |
208 | KEY(5, 4, KEY_H), | |
209 | KEY(5, 5, KEY_Y), | |
210 | ||
211 | KEY(6, 0, KEY_TAB), /* Side Activate */ | |
212 | KEY(6, 1, KEY_PAGEDOWN), /* Side down */ | |
213 | KEY(6, 2, KEY_ENTER), | |
214 | KEY(6, 3, KEY_N), | |
215 | KEY(6, 4, KEY_J), | |
216 | KEY(6, 5, KEY_U), | |
217 | ||
218 | KEY(7, 0, KEY_F6), /* Green/Call */ | |
219 | KEY(7, 1, KEY_O), | |
220 | KEY(7, 2, KEY_BACKSPACE), | |
221 | KEY(7, 3, KEY_M), | |
222 | KEY(7, 4, KEY_K), | |
223 | KEY(7, 5, KEY_I), | |
224 | }; | |
225 | ||
226 | static const unsigned int centro_matrix_keys[] = { | |
227 | KEY(0, 0, KEY_F9), /* Home */ | |
228 | KEY(0, 1, KEY_LEFT), | |
229 | KEY(0, 2, KEY_LEFTCTRL), /* Alternate */ | |
230 | KEY(0, 3, KEY_L), | |
231 | KEY(0, 4, KEY_A), | |
232 | KEY(0, 5, KEY_Q), | |
233 | KEY(0, 6, KEY_P), | |
234 | ||
235 | KEY(1, 0, KEY_RIGHTCTRL), /* Menu */ | |
236 | KEY(1, 1, KEY_RIGHT), | |
237 | KEY(1, 2, KEY_LEFTSHIFT), /* Left shift */ | |
238 | KEY(1, 3, KEY_Z), | |
239 | KEY(1, 4, KEY_S), | |
240 | KEY(1, 5, KEY_W), | |
241 | ||
242 | KEY(2, 0, KEY_F1), /* Phone */ | |
243 | KEY(2, 1, KEY_UP), | |
244 | KEY(2, 2, KEY_0), | |
245 | KEY(2, 3, KEY_X), | |
246 | KEY(2, 4, KEY_D), | |
247 | KEY(2, 5, KEY_E), | |
248 | ||
249 | KEY(3, 0, KEY_F10), /* Calendar */ | |
250 | KEY(3, 1, KEY_DOWN), | |
251 | KEY(3, 2, KEY_SPACE), | |
252 | KEY(3, 3, KEY_C), | |
253 | KEY(3, 4, KEY_F), | |
254 | KEY(3, 5, KEY_R), | |
255 | ||
256 | KEY(4, 0, KEY_F12), /* Mail */ | |
257 | KEY(4, 1, KEY_KPENTER), | |
258 | KEY(4, 2, KEY_RIGHTALT), /* Alt */ | |
259 | KEY(4, 3, KEY_V), | |
260 | KEY(4, 4, KEY_G), | |
261 | KEY(4, 5, KEY_T), | |
262 | ||
263 | KEY(5, 0, KEY_F8), /* Red/Off/Power */ | |
264 | KEY(5, 1, KEY_PAGEUP), /* Side up */ | |
265 | KEY(5, 2, KEY_DOT), | |
266 | KEY(5, 3, KEY_B), | |
267 | KEY(5, 4, KEY_H), | |
268 | KEY(5, 5, KEY_Y), | |
269 | ||
270 | KEY(6, 0, KEY_TAB), /* Side Activate */ | |
271 | KEY(6, 1, KEY_PAGEDOWN), /* Side down */ | |
272 | KEY(6, 2, KEY_ENTER), | |
273 | KEY(6, 3, KEY_N), | |
274 | KEY(6, 4, KEY_J), | |
275 | KEY(6, 5, KEY_U), | |
276 | ||
277 | KEY(7, 0, KEY_F6), /* Green/Call */ | |
278 | KEY(7, 1, KEY_O), | |
279 | KEY(7, 2, KEY_BACKSPACE), | |
280 | KEY(7, 3, KEY_M), | |
281 | KEY(7, 4, KEY_K), | |
282 | KEY(7, 5, KEY_I), | |
283 | }; | |
284 | ||
285 | static struct matrix_keymap_data treo680_matrix_keymap_data = { | |
286 | .keymap = treo680_matrix_keys, | |
287 | .keymap_size = ARRAY_SIZE(treo680_matrix_keys), | |
288 | }; | |
289 | ||
290 | static struct matrix_keymap_data centro_matrix_keymap_data = { | |
291 | .keymap = centro_matrix_keys, | |
292 | .keymap_size = ARRAY_SIZE(centro_matrix_keys), | |
293 | }; | |
294 | ||
295 | static struct pxa27x_keypad_platform_data treo680_keypad_pdata = { | |
296 | .matrix_key_rows = 8, | |
297 | .matrix_key_cols = 7, | |
298 | .matrix_keymap_data = &treo680_matrix_keymap_data, | |
299 | .direct_key_map = { KEY_CONNECT }, | |
300 | .direct_key_num = 1, | |
301 | ||
302 | .debounce_interval = 30, | |
303 | }; | |
304 | ||
305 | static void __init palmtreo_kpc_init(void) | |
306 | { | |
307 | static struct pxa27x_keypad_platform_data *data = &treo680_keypad_pdata; | |
308 | ||
309 | if (machine_is_centro()) | |
310 | data->matrix_keymap_data = ¢ro_matrix_keymap_data; | |
311 | ||
312 | pxa_set_keypad_info(&treo680_keypad_pdata); | |
313 | } | |
314 | #else | |
315 | static inline void palmtreo_kpc_init(void) {} | |
316 | #endif | |
317 | ||
318 | /****************************************************************************** | |
319 | * USB host | |
320 | ******************************************************************************/ | |
321 | #if IS_ENABLED(CONFIG_USB_OHCI_HCD) | |
322 | static struct pxaohci_platform_data treo680_ohci_info = { | |
323 | .port_mode = PMM_PERPORT_MODE, | |
324 | .flags = ENABLE_PORT1 | ENABLE_PORT3, | |
325 | .power_budget = 0, | |
326 | }; | |
327 | ||
328 | static void __init palmtreo_uhc_init(void) | |
329 | { | |
330 | if (machine_is_treo680()) | |
331 | pxa_set_ohci_info(&treo680_ohci_info); | |
332 | } | |
333 | #else | |
334 | static inline void palmtreo_uhc_init(void) {} | |
335 | #endif | |
336 | ||
337 | /****************************************************************************** | |
338 | * Vibra and LEDs | |
339 | ******************************************************************************/ | |
340 | static struct gpio_led treo680_gpio_leds[] = { | |
341 | { | |
342 | .name = "treo680:vibra:vibra", | |
343 | .default_trigger = "none", | |
344 | .gpio = GPIO_NR_TREO680_VIBRATE_EN, | |
345 | }, | |
346 | { | |
347 | .name = "treo680:green:led", | |
348 | .default_trigger = "mmc0", | |
349 | .gpio = GPIO_NR_TREO_GREEN_LED, | |
350 | }, | |
351 | { | |
352 | .name = "treo680:white:keybbl", | |
353 | .default_trigger = "none", | |
354 | .gpio = GPIO_NR_TREO680_KEYB_BL, | |
355 | }, | |
356 | }; | |
357 | ||
358 | static struct gpio_led_platform_data treo680_gpio_led_info = { | |
359 | .leds = treo680_gpio_leds, | |
360 | .num_leds = ARRAY_SIZE(treo680_gpio_leds), | |
361 | }; | |
362 | ||
363 | static struct gpio_led centro_gpio_leds[] = { | |
364 | { | |
365 | .name = "centro:vibra:vibra", | |
366 | .default_trigger = "none", | |
367 | .gpio = GPIO_NR_CENTRO_VIBRATE_EN, | |
368 | }, | |
369 | { | |
370 | .name = "centro:green:led", | |
371 | .default_trigger = "mmc0", | |
372 | .gpio = GPIO_NR_TREO_GREEN_LED, | |
373 | }, | |
374 | { | |
375 | .name = "centro:white:keybbl", | |
376 | .default_trigger = "none", | |
377 | .active_low = 1, | |
378 | .gpio = GPIO_NR_CENTRO_KEYB_BL, | |
379 | }, | |
380 | }; | |
381 | ||
382 | static struct gpio_led_platform_data centro_gpio_led_info = { | |
383 | .leds = centro_gpio_leds, | |
384 | .num_leds = ARRAY_SIZE(centro_gpio_leds), | |
385 | }; | |
386 | ||
387 | static struct platform_device palmtreo_leds = { | |
388 | .name = "leds-gpio", | |
389 | .id = -1, | |
390 | }; | |
391 | ||
392 | static void __init palmtreo_leds_init(void) | |
393 | { | |
394 | if (machine_is_centro()) | |
395 | palmtreo_leds.dev.platform_data = ¢ro_gpio_led_info; | |
396 | else if (machine_is_treo680()) | |
397 | palmtreo_leds.dev.platform_data = &treo680_gpio_led_info; | |
398 | ||
399 | platform_device_register(&palmtreo_leds); | |
400 | } | |
401 | ||
402 | /****************************************************************************** | |
403 | * Machine init | |
404 | ******************************************************************************/ | |
405 | static void __init treo_reserve(void) | |
406 | { | |
407 | memblock_reserve(0xa0000000, 0x1000); | |
408 | memblock_reserve(0xa2000000, 0x1000); | |
409 | } | |
410 | ||
411 | static void __init palmphone_common_init(void) | |
412 | { | |
413 | pxa2xx_mfp_config(ARRAY_AND_SIZE(treo_pin_config)); | |
414 | pxa_set_ffuart_info(NULL); | |
415 | pxa_set_btuart_info(NULL); | |
416 | pxa_set_stuart_info(NULL); | |
417 | palm27x_pm_init(TREO_STR_BASE); | |
418 | palm27x_lcd_init(GPIO_NR_TREO_BL_POWER, &palm_320x320_new_lcd_mode); | |
419 | palm27x_udc_init(GPIO_NR_TREO_USB_DETECT, GPIO_NR_TREO_USB_PULLUP, 1); | |
420 | palm27x_irda_init(GPIO_NR_TREO_IR_EN); | |
421 | palm27x_ac97_init(-1, -1, -1, 95); | |
422 | palm27x_pwm_init(GPIO_NR_TREO_BL_POWER, -1); | |
423 | palm27x_power_init(GPIO_NR_TREO_POWER_DETECT, -1); | |
424 | palm27x_pmic_init(); | |
425 | palmtreo_kpc_init(); | |
426 | palmtreo_uhc_init(); | |
427 | palmtreo_leds_init(); | |
428 | } | |
429 | ||
430 | #ifdef CONFIG_MACH_TREO680 | |
431 | void __init treo680_gpio_init(void) | |
432 | { | |
433 | unsigned int gpio; | |
434 | ||
435 | /* drive all three lcd gpios high initially */ | |
436 | const unsigned long lcd_flags = GPIOF_INIT_HIGH | GPIOF_DIR_OUT; | |
437 | ||
438 | /* | |
439 | * LCD GPIO initialization... | |
440 | */ | |
441 | ||
442 | /* | |
443 | * This is likely the power to the lcd. Toggling it low/high appears to | |
444 | * turn the lcd off/on. Can be toggled after lcd is initialized without | |
445 | * any apparent adverse effects to the lcd operation. Note that this | |
446 | * gpio line is used by the lcd controller as the L_BIAS signal, but | |
447 | * treo680 configures it as gpio. | |
448 | */ | |
449 | gpio = GPIO_NR_TREO680_LCD_POWER; | |
450 | if (gpio_request_one(gpio, lcd_flags, "LCD power") < 0) | |
451 | goto fail; | |
452 | ||
453 | /* | |
454 | * These two are called "enables", for lack of a better understanding. | |
455 | * If either of these are toggled after the lcd is initialized, the | |
456 | * image becomes degraded. N.B. The IPL shipped with the treo | |
457 | * configures GPIO_NR_TREO680_LCD_EN_N as output and drives it high. If | |
458 | * the IPL is ever reprogrammed, this initialization may be need to be | |
459 | * revisited. | |
460 | */ | |
461 | gpio = GPIO_NR_TREO680_LCD_EN; | |
462 | if (gpio_request_one(gpio, lcd_flags, "LCD enable") < 0) | |
463 | goto fail; | |
464 | gpio = GPIO_NR_TREO680_LCD_EN_N; | |
465 | if (gpio_request_one(gpio, lcd_flags, "LCD enable_n") < 0) | |
466 | goto fail; | |
467 | ||
468 | /* driving this low turns LCD on */ | |
469 | gpio_set_value(GPIO_NR_TREO680_LCD_EN_N, 0); | |
470 | ||
471 | return; | |
472 | fail: | |
473 | pr_err("gpio %d initialization failed\n", gpio); | |
474 | gpio_free(GPIO_NR_TREO680_LCD_POWER); | |
475 | gpio_free(GPIO_NR_TREO680_LCD_EN); | |
476 | gpio_free(GPIO_NR_TREO680_LCD_EN_N); | |
477 | } | |
478 | ||
479 | static struct gpiod_lookup_table treo680_mci_gpio_table = { | |
480 | .dev_id = "pxa2xx-mci.0", | |
481 | .table = { | |
482 | GPIO_LOOKUP("gpio-pxa", GPIO_NR_TREO_SD_DETECT_N, | |
483 | "cd", GPIO_ACTIVE_LOW), | |
484 | GPIO_LOOKUP("gpio-pxa", GPIO_NR_TREO680_SD_READONLY, | |
485 | "wp", GPIO_ACTIVE_LOW), | |
486 | GPIO_LOOKUP("gpio-pxa", GPIO_NR_TREO680_SD_POWER, | |
487 | "power", GPIO_ACTIVE_HIGH), | |
488 | { }, | |
489 | }, | |
490 | }; | |
491 | ||
492 | static void __init treo680_init(void) | |
493 | { | |
494 | pxa2xx_mfp_config(ARRAY_AND_SIZE(treo680_pin_config)); | |
495 | palmphone_common_init(); | |
496 | treo680_gpio_init(); | |
497 | palm27x_mmc_init(&treo680_mci_gpio_table); | |
498 | } | |
499 | #endif | |
500 | ||
501 | #ifdef CONFIG_MACH_CENTRO | |
502 | ||
503 | static struct gpiod_lookup_table centro685_mci_gpio_table = { | |
504 | .dev_id = "pxa2xx-mci.0", | |
505 | .table = { | |
506 | GPIO_LOOKUP("gpio-pxa", GPIO_NR_TREO_SD_DETECT_N, | |
507 | "cd", GPIO_ACTIVE_LOW), | |
508 | GPIO_LOOKUP("gpio-pxa", GPIO_NR_CENTRO_SD_POWER, | |
509 | "power", GPIO_ACTIVE_LOW), | |
510 | { }, | |
511 | }, | |
512 | }; | |
513 | ||
514 | static void __init centro_init(void) | |
515 | { | |
516 | pxa2xx_mfp_config(ARRAY_AND_SIZE(centro685_pin_config)); | |
517 | palmphone_common_init(); | |
518 | palm27x_mmc_init(¢ro685_mci_gpio_table); | |
519 | } | |
520 | #endif | |
521 | ||
522 | #ifdef CONFIG_MACH_TREO680 | |
523 | MACHINE_START(TREO680, "Palm Treo 680") | |
524 | .atag_offset = 0x100, | |
525 | .map_io = pxa27x_map_io, | |
526 | .reserve = treo_reserve, | |
527 | .nr_irqs = PXA_NR_IRQS, | |
528 | .init_irq = pxa27x_init_irq, | |
529 | .handle_irq = pxa27x_handle_irq, | |
530 | .init_time = pxa_timer_init, | |
531 | .init_machine = treo680_init, | |
532 | .restart = pxa_restart, | |
533 | MACHINE_END | |
534 | #endif | |
535 | ||
536 | #ifdef CONFIG_MACH_CENTRO | |
537 | MACHINE_START(CENTRO, "Palm Centro 685") | |
538 | .atag_offset = 0x100, | |
539 | .map_io = pxa27x_map_io, | |
540 | .reserve = treo_reserve, | |
541 | .nr_irqs = PXA_NR_IRQS, | |
542 | .init_irq = pxa27x_init_irq, | |
543 | .handle_irq = pxa27x_handle_irq, | |
544 | .init_time = pxa_timer_init, | |
545 | .init_machine = centro_init, | |
546 | .restart = pxa_restart, | |
547 | MACHINE_END | |
548 | #endif |