]>
Commit | Line | Data |
---|---|---|
1 | ChangeLog: | |
2 | * 0.0 initial release | |
3 | * 0.1 addition of ATUSB_TEST | |
4 | * 0.2 First public release. Compatible with atusb driver in the upcoming 4.2 kernel | |
5 | * 0.3 * ATUSB_EUI64_READ/WRITE for permanent EUI64 handling | |
6 | * Support to run the firmware on Atmel Raven USB dongles (Alexander Aring) | |
7 | * Remove FCS frame check from firmware and leave it to the driver | |
8 | * Use extended operation mode for TX for automatic ACK handling | |
9 | ||
10 | To flash the firmware you need dfu-util on the host. Issue | |
11 | ||
12 | dfu-util -d 20b7:1540 -D atusb-0.3.dfu | |
13 | ||
14 | right after plugging the device into the USB port while the red led is still | |
15 | on. | |
16 | ||
17 | For the Atmel Raven USB dongle a full JTAG setup is needed to flash the | |
18 | firmware as no DFU bootloader is available there. | |
19 | ||
20 | The firmware is flashed into permanent storage and does not need to be provided | |
21 | after power off. A new firmware version can be flashed the same way. | |
22 | ||
23 | Firmware source code is GPLv2+ and can be found here: | |
24 | http://projects.qi-hardware.com/index.php/p/ben-wpan/source/tree/master/atusb/fw |